RISC-V: PR27566, Do not relax when data segment phase is exp_seg_relro_adjust.

2021-05-31  Nelson Chu  <nelson.chu@sifive.com>
            Lifang Xia  <lifang_xia@c-sky.com>

The data segment phase exp_seg_relro_adjust means we are still adjusting the
relro segments, so we will get the symbol values which havn't consider the
relro.  It is dangerous and we shouldn't do the relaxations at this stage.
Otherwise, we may get the truncated fails when the relax range crossing the
data segment.

One of the solution is that, we use a pointer to monitor the data segment
phase while relaxing, to know whether the relro has been handled or not.
Once we check the phase is exp_seg_relro_adjust, we should skip this round
of relaxations, since the incorrect symbol values will affect the correctness
of relaxations.  I think we probably need to record more information about
data segment or alignments in the future, to make sure it is safe to doing
relaxations.

For the two new testcases, relro-relax-lui and relro-relax-pcrel, we get
the following truncated errors when using toolchains, which enable relro:

(.text+0x0): relocation truncated to fit: R_RISCV_GPREL_I against symbol `SymbolRodata' defined in .rodata section in test1.o

After applying this patch, the truncated errors should be resolved.
However, only linux toolchains support -z relro, so we only test these
two testcases when supporting shared library.

bfd/
    PR 27566
    * elfnn-riscv.c (struct riscv_elf_link_hash_table): New integer pointer
    to monitor the data segment phase.
    (bfd_elfNN_riscv_set_data_segment_info): New function called by
    after_allocation, to set the data_segment_phase from expld.dataseg.
    (_bfd_riscv_relax_section): Don't relax when data_segment_phase is
    exp_seg_relro_adjust (0x4).
    * elfxx-riscv.h (bfd_elf32_riscv_set_data_segment_info): New extern.
    (bfd_elf64_riscv_set_data_segment_info): Likewise.
ld/
    PR 27566
    * emultempl/riscvelf.em (after_allocation): Call
    riscv_set_data_segment_info to set data segment phase before relaxing.
    * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
    * testsuite/ld-riscv-elf/relro-relax-lui.d: New testcase.
    * testsuite/ld-riscv-elf/relro-relax-lui.s: Likewise.
    * testsuite/ld-riscv-elf/relro-relax-pcrel.d: Likewise.
    * testsuite/ld-riscv-elf/relro-relax-pcrel.s: Likewise.

7 files changed, 82 insertions, 0 deletions

diff --git a/ld/ChangeLog b/ld/ChangeLog
index 263dee0..2c6615d 100644
--- a/ld/ChangeLog
+++ b/ld/ChangeLog
@@ -1,3 +1,15 @@
+2021-05-31  Nelson Chu  <nelson.chu@sifive.com>
+	    Lifang Xia  <lifang_xia@c-sky.com>
+
+	PR 27566
+	* emultempl/riscvelf.em (after_allocation): Call
+	riscv_set_data_segment_info to set data segment phase before relaxing.
+	* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
+	* testsuite/ld-riscv-elf/relro-relax-lui.d: New testcase.
+	* testsuite/ld-riscv-elf/relro-relax-lui.s: Likewise.
+	* testsuite/ld-riscv-elf/relro-relax-pcrel.d: Likewise.
+	* testsuite/ld-riscv-elf/relro-relax-pcrel.s: Likewise.
+
 2021-05-28  H.J. Lu  <hongjiu.lu@intel.com>
 
 	PR ld/27905
diff --git a/ld/emultempl/riscvelf.em b/ld/emultempl/riscvelf.em
index 5fa7c77..c625a63 100644
--- a/ld/emultempl/riscvelf.em
+++ b/ld/emultempl/riscvelf.em
@@ -62,6 +62,20 @@ gld${EMULATION_NAME}_after_allocation (void)
 	}
     }
 
+  /* PR 27566, if the phase of data segment is exp_seg_relro_adjust,
+     that means we are still adjusting the relro, and shouldn't do the
+     relaxations at this stage.  Otherwise, we will get the symbol
+     values beofore handling the relro, and may cause truncated fails
+     when the relax range crossing the data segment.  One of the solution
+     is to monitor the data segment phase while relaxing, to know whether
+     the relro has been handled or not.
+
+     I think we probably need to record more information about data
+     segment or alignments in the future, to make sure it is safe
+     to doing relaxations.  */
+  enum phase_enum *phase = &(expld.dataseg.phase);
+  bfd_elf${ELFSIZE}_riscv_set_data_segment_info (&link_info, (int *) phase);
+
   do
     {
       ldelf_map_segments (need_layout);
diff --git a/ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp b/ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp
index 319ac7e..0b49ddc 100644
--- a/ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp
+++ b/ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp
@@ -122,6 +122,9 @@ if [istarget "riscv*-*-*"] {
 	return
     }
 
+    run_dump_test "relro-relax-lui"
+    run_dump_test "relro-relax-pcrel"
+
     set abis [list rv32gc ilp32 [riscv_choose_ilp32_emul] rv64gc lp64 [riscv_choose_lp64_emul]]
     foreach { arch abi emul } $abis {
 	# This checks whether our linker scripts handle __global_pointer$
diff --git a/ld/testsuite/ld-riscv-elf/relro-relax-lui.d b/ld/testsuite/ld-riscv-elf/relro-relax-lui.d
new file mode 100644
index 0000000..d29aa9d
--- /dev/null
+++ b/ld/testsuite/ld-riscv-elf/relro-relax-lui.d
@@ -0,0 +1,12 @@
+#source: relro-relax-lui.s
+#ld: -zrelro --relax
+#objdump: -d -Mno-aliases
+
+.*:[ 	]+file format .*
+
+
+Disassembly of section .text:
+
+0+[0-9a-f]+ <_start>:
+.*:[ 	]+[0-9a-f]+[ 	]+lui[ 	]+.*
+.*:[ 	]+[0-9a-f]+[ 	]+addi[ 	]+.*<SymbolRodata>
diff --git a/ld/testsuite/ld-riscv-elf/relro-relax-lui.s b/ld/testsuite/ld-riscv-elf/relro-relax-lui.s
new file mode 100644
index 0000000..f284187
--- /dev/null
+++ b/ld/testsuite/ld-riscv-elf/relro-relax-lui.s
@@ -0,0 +1,15 @@
+	.section	.rodata
+	.align	10
+	.globl	SymbolRodata
+	.set	SymbolRodata, . + 0x1800
+	.word	0x0
+
+
+	.section	.init_array
+        .word	0x0
+
+	.text
+	.globl	_start
+_start:
+	lui	a0, %hi (SymbolRodata)
+	addi	a0, a0, %lo (SymbolRodata)
diff --git a/ld/testsuite/ld-riscv-elf/relro-relax-pcrel.d b/ld/testsuite/ld-riscv-elf/relro-relax-pcrel.d
new file mode 100644
index 0000000..28e11b3
--- /dev/null
+++ b/ld/testsuite/ld-riscv-elf/relro-relax-pcrel.d
@@ -0,0 +1,12 @@
+#source: relro-relax-pcrel.s
+#ld: -zrelro --relax
+#objdump: -d -Mno-aliases
+
+.*:[ 	]+file format .*
+
+
+Disassembly of section .text:
+
+0+[0-9a-f]+ <_start>:
+.*:[ 	]+[0-9a-f]+[ 	]+auipc[ 	]+.*
+.*:[ 	]+[0-9a-f]+[ 	]+addi[ 	]+.*<SymbolRodata>
diff --git a/ld/testsuite/ld-riscv-elf/relro-relax-pcrel.s b/ld/testsuite/ld-riscv-elf/relro-relax-pcrel.s
new file mode 100644
index 0000000..4a88287
--- /dev/null
+++ b/ld/testsuite/ld-riscv-elf/relro-relax-pcrel.s
@@ -0,0 +1,14 @@
+	.section	.rodata
+	.align	10
+	.globl	SymbolRodata
+	.set	SymbolRodata, . + 0x1800
+	.word	0x0
+
+
+	.section	.init_array
+        .word	0x0
+
+	.text
+	.globl	_start
+_start:
+	lla	a0, SymbolRodata