s/typedef serial_t/struct serial */

1 files changed, 49 insertions, 49 deletions

diff --git a/gdb/serial.h b/gdb/serial.h
index 0a8df3c..1863d21 100644
--- a/gdb/serial.h
+++ b/gdb/serial.h
@@ -30,28 +30,26 @@
 
 typedef void *serial_ttystate;
 struct serial;
-typedef struct serial *serial_t;
 
-/* Try to open NAME.  Returns a new serial_t on success, NULL on
-   failure. */
+/* Try to open NAME.  Returns a new `struct serial *' on success, NULL
+   on failure. */
 
-extern serial_t serial_open (const char *name);
+extern struct serial *serial_open (const char *name);
 #define SERIAL_OPEN(NAME) serial_open(NAME)
 
 /* Open a new serial stream using a file handle.  */
 
-extern serial_t serial_fdopen (const int fd);
+extern struct serial *serial_fdopen (const int fd);
 #define SERIAL_FDOPEN(FD) serial_fdopen(FD)
 
-/* Push out all buffers, close the device and destroy SERIAL_T. */
+/* Push out all buffers, close the device and destroy SCB. */
 
-extern void serial_close (serial_t);
+extern void serial_close (struct serial *scb);
 #define SERIAL_CLOSE(SERIAL_T) serial_close ((SERIAL_T))
 
-/* Push out all buffers and destroy SERIAL_T without closing the
-   device.  */
+/* Push out all buffers and destroy SCB without closing the device.  */
 
-extern void serial_un_fdopen (serial_t scb);
+extern void serial_un_fdopen (struct serial *scb);
 #define SERIAL_UN_FDOPEN(SERIAL_T) serial_un_fdopen ((SERIAL_T))
 
 /* Read one char from the serial device with TIMEOUT seconds to wait
@@ -70,50 +68,50 @@ enum serial_rc {
 			   things like the line dropping dead. */
 };
 
-extern int serial_readchar (serial_t scb, int timeout);
+extern int serial_readchar (struct serial *scb, int timeout);
 #define SERIAL_READCHAR(SERIAL_T, TIMEOUT) serial_readchar ((SERIAL_T), (TIMEOUT))
 
-/* Write LEN chars from STRING to the port SERIAL_T.  Returns 0 for
+/* Write LEN chars from STRING to the port SCB.  Returns 0 for
    success, non-zero for failure.  */
 
-extern int serial_write (serial_t scb, const char *str, int len);
+extern int serial_write (struct serial *scb, const char *str, int len);
 #define SERIAL_WRITE(SERIAL_T, STRING,LEN)  serial_write (SERIAL_T, STRING, LEN)
 
 /* Write a printf style string onto the serial port. */
 
-extern void serial_printf (serial_t desc, const char *,...) ATTR_FORMAT (printf, 2, 3);
+extern void serial_printf (struct serial *desc, const char *,...) ATTR_FORMAT (printf, 2, 3);
 
 /* Allow pending output to drain. */
 
-extern int serial_drain_output (serial_t);
+extern int serial_drain_output (struct serial *);
 #define SERIAL_DRAIN_OUTPUT(SERIAL_T) serial_drain_output ((SERIAL_T))
 
 /* Flush (discard) pending output.  Might also flush input (if this
    system can't flush only output).  */
 
-extern int serial_flush_output (serial_t);
+extern int serial_flush_output (struct serial *);
 #define SERIAL_FLUSH_OUTPUT(SERIAL_T) serial_flush_output ((SERIAL_T))
 
 /* Flush pending input.  Might also flush output (if this system can't
    flush only input).  */
 
-extern int serial_flush_input (serial_t);
+extern int serial_flush_input (struct serial *);
 #define SERIAL_FLUSH_INPUT(SERIAL_T) serial_flush_input ((SERIAL_T))
 
 /* Send a break between 0.25 and 0.5 seconds long.  */
 
-extern int serial_send_break (serial_t scb);
+extern int serial_send_break (struct serial *scb);
 #define SERIAL_SEND_BREAK(SERIAL_T) serial_send_break (SERIAL_T)
 
 /* Turn the port into raw mode. */
 
-extern void serial_raw (serial_t scb);
+extern void serial_raw (struct serial *scb);
 #define SERIAL_RAW(SERIAL_T) serial_raw ((SERIAL_T))
 
 /* Return a pointer to a newly malloc'd ttystate containing the state
    of the tty.  */
 
-extern serial_ttystate serial_get_tty_state (serial_t scb);
+extern serial_ttystate serial_get_tty_state (struct serial *scb);
 #define SERIAL_GET_TTY_STATE(SERIAL_T) serial_get_tty_state ((SERIAL_T))
 
 /* Set the state of the tty to TTYSTATE.  The change is immediate.
@@ -121,14 +119,14 @@ extern serial_ttystate serial_get_tty_state (serial_t scb);
    Returns 0 for success, negative value for error (in which case
    errno contains the error).  */
 
-extern int serial_set_tty_state (serial_t scb, serial_ttystate ttystate);
+extern int serial_set_tty_state (struct serial *scb, serial_ttystate ttystate);
 #define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) serial_set_tty_state ((SERIAL_T), (TTYSTATE))
 
 /* printf_filtered a user-comprehensible description of ttystate on
    the specified STREAM. FIXME: At present this sends output to the
    default stream - GDB_STDOUT. */
 
-extern void serial_print_tty_state (serial_t scb, serial_ttystate ttystate, struct ui_file *);
+extern void serial_print_tty_state (struct serial *scb, serial_ttystate ttystate, struct ui_file *);
 #define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE, STREAM) serial_print_tty_state ((SERIAL_T), (TTYSTATE), (STREAM))
 
 /* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
@@ -137,14 +135,14 @@ extern void serial_print_tty_state (serial_t scb, serial_ttystate ttystate, stru
    This means that we never switch in or out of raw mode, even if
    NEW_TTYSTATE specifies a switch.  */
 
-extern int serial_noflush_set_tty_state (serial_t scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate);
+extern int serial_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate);
 #define SERIAL_NOFLUSH_SET_TTY_STATE(SERIAL_T, NEW_TTYSTATE, OLD_TTYSTATE) \
 serial_noflush_set_tty_state ((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE))
 
 /* Set the baudrate to the decimal value supplied.  Returns 0 for
    success, -1 for failure.  */
 
-extern int serial_setbaudrate (serial_t scb, int rate);
+extern int serial_setbaudrate (struct serial *scb, int rate);
 #define SERIAL_SETBAUDRATE(SERIAL_T, RATE) serial_setbaudrate ((SERIAL_T), (RATE))
 
 /* Set the number of stop bits to the value specified.  Returns 0 for
@@ -154,27 +152,27 @@ extern int serial_setbaudrate (serial_t scb, int rate);
 #define SERIAL_1_AND_A_HALF_STOPBITS 2	/* 1.5 bits, snicker... */
 #define SERIAL_2_STOPBITS 3
 
-extern int serial_setstopbits (serial_t scb, int num);
+extern int serial_setstopbits (struct serial *scb, int num);
 #define SERIAL_SETSTOPBITS(SERIAL_T, NUM) serial_setstopbits ((SERIAL_T), (NUM))
 
 /* Asynchronous serial interface: */
 
 /* Can the serial device support asynchronous mode? */
 
-extern int serial_can_async_p (serial_t scb);
+extern int serial_can_async_p (struct serial *scb);
 #define SERIAL_CAN_ASYNC_P(SERIAL_T) serial_can_async_p ((SERIAL_T))
 
 /* Has the serial device been put in asynchronous mode? */
 
-extern int serial_is_async_p (serial_t scb);
+extern int serial_is_async_p (struct serial *scb);
 #define SERIAL_IS_ASYNC_P(SERIAL_T) serial_is_async_p ((SERIAL_T))
 
 /* For ASYNC enabled devices, register a callback and enable
    asynchronous mode.  To disable asynchronous mode, register a NULL
    callback. */
 
-typedef void (serial_event_ftype) (serial_t scb, void *context);
-extern void serial_async (serial_t scb, serial_event_ftype *handler, void *context);
+typedef void (serial_event_ftype) (struct serial *scb, void *context);
+extern void serial_async (struct serial *scb, serial_event_ftype *handler, void *context);
 #define SERIAL_ASYNC(SERIAL_T, HANDLER, CONTEXT) serial_async ((SERIAL_T), (HANDLER), (CONTEXT)) 
 
 /* Provide direct access to the underlying FD (if any) used to
@@ -182,7 +180,7 @@ extern void serial_async (serial_t scb, serial_event_ftype *handler, void *conte
    deprecated. Will call internal_error() if the operation isn't
    applicable to the current serial device. */
 
-extern int deprecated_serial_fd (serial_t scb);
+extern int deprecated_serial_fd (struct serial *scb);
 #define DEPRECATED_SERIAL_FD(SERIAL_T) deprecated_serial_fd ((SERIAL_T))
 
 /* Trace/debug mechanism.
@@ -190,10 +188,10 @@ extern int deprecated_serial_fd (serial_t scb);
    SERIAL_DEBUG() enables/disables internal debugging.
    SERIAL_DEBUG_P() indicates the current debug state. */
 
-extern void serial_debug (serial_t scb, int debug_p);
+extern void serial_debug (struct serial *scb, int debug_p);
 #define SERIAL_DEBUG(SERIAL_T, DEBUG_P) serial_debug ((SERIAL_T), (DEBUG_P))
 
-extern int serial_debug_p (serial_t scb);
+extern int serial_debug_p (struct serial *scb);
 #define SERIAL_DEBUG_P(SERIAL_T) serial_debug_p ((SERIAL_T))
 
 
@@ -215,7 +213,7 @@ struct serial
 				   still need to wait for this many
 				   more seconds.  */
     char *name;			/* The name of the device or host */
-    struct serial *next;	/* Pointer to the next serial_t */
+    struct serial *next;	/* Pointer to the next `struct serial *' */
     int refcnt;			/* Number of pointers to this block */
     int debug_p;		/* Trace this serial devices operation. */
     int async_state;		/* Async internal state. */
@@ -227,28 +225,30 @@ struct serial_ops
   {
     char *name;
     struct serial_ops *next;
-    int (*open) (serial_t, const char *name);
-    void (*close) (serial_t);
-    int (*readchar) (serial_t, int timeout);
-    int (*write) (serial_t, const char *str, int len);
+    int (*open) (struct serial *, const char *name);
+    void (*close) (struct serial *);
+    int (*readchar) (struct serial *, int timeout);
+    int (*write) (struct serial *, const char *str, int len);
     /* Discard pending output */
-    int (*flush_output) (serial_t);
+    int (*flush_output) (struct serial *);
     /* Discard pending input */
-    int (*flush_input) (serial_t);
-    int (*send_break) (serial_t);
-    void (*go_raw) (serial_t);
-    serial_ttystate (*get_tty_state) (serial_t);
-    int (*set_tty_state) (serial_t, serial_ttystate);
-    void (*print_tty_state) (serial_t, serial_ttystate, struct ui_file *);
-    int (*noflush_set_tty_state) (serial_t, serial_ttystate, serial_ttystate);
-    int (*setbaudrate) (serial_t, int rate);
-    int (*setstopbits) (serial_t, int num);
+    int (*flush_input) (struct serial *);
+    int (*send_break) (struct serial *);
+    void (*go_raw) (struct serial *);
+    serial_ttystate (*get_tty_state) (struct serial *);
+    int (*set_tty_state) (struct serial *, serial_ttystate);
+    void (*print_tty_state) (struct serial *, serial_ttystate,
+			     struct ui_file *);
+    int (*noflush_set_tty_state) (struct serial *, serial_ttystate,
+				  serial_ttystate);
+    int (*setbaudrate) (struct serial *, int rate);
+    int (*setstopbits) (struct serial *, int num);
     /* Wait for output to drain */
-    int (*drain_output) (serial_t);
+    int (*drain_output) (struct serial *);
     /* Change the serial device into/out of asynchronous mode, call
        the specified function when ever there is something
        interesting. */
-    void (*async) (serial_t scb, int async_p);
+    void (*async) (struct serial *scb, int async_p);
   };
 
 /* Add a new serial interface to the interface list */