aboutsummaryrefslogtreecommitdiff
path: root/gdb/remote.c
diff options
context:
space:
mode:
authorJason Molenda <jmolenda@apple.com>1999-08-09 21:36:23 +0000
committerJason Molenda <jmolenda@apple.com>1999-08-09 21:36:23 +0000
commit96baa820df8126165bd3c4a33c561556b21203af (patch)
tree60cf1938a2c0aaae5d3aab73b553f031138ec99c /gdb/remote.c
parent10e80b41455f1a386485631b7c170cafe341dcd6 (diff)
downloadgdb-96baa820df8126165bd3c4a33c561556b21203af.zip
gdb-96baa820df8126165bd3c4a33c561556b21203af.tar.gz
gdb-96baa820df8126165bd3c4a33c561556b21203af.tar.bz2
import gdb-1999-08-09 snapshot
Diffstat (limited to 'gdb/remote.c')
-rw-r--r--gdb/remote.c675
1 files changed, 401 insertions, 274 deletions
diff --git a/gdb/remote.c b/gdb/remote.c
index c697bd4..5b96705 100644
--- a/gdb/remote.c
+++ b/gdb/remote.c
@@ -18,188 +18,8 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-/* *INDENT-OFF* */
-/* Remote communication protocol.
-
- A debug packet whose contents are <data>
- is encapsulated for transmission in the form:
-
- $ <data> # CSUM1 CSUM2
-
- <data> must be ASCII alphanumeric and cannot include characters
- '$' or '#'. If <data> starts with two characters followed by
- ':', then the existing stubs interpret this as a sequence number.
-
- CSUM1 and CSUM2 are ascii hex representation of an 8-bit
- checksum of <data>, the most significant nibble is sent first.
- the hex digits 0-9,a-f are used.
-
- Receiver responds with:
-
- + - if CSUM is correct and ready for next packet
- - - if CSUM is incorrect
-
- <data> is as follows:
- Most values are encoded in ascii hex digits. Signal numbers are according
- to the numbering in target.h.
-
- Request Packet
-
- set thread Hct... Set thread for subsequent operations.
- c = 'c' for thread used in step and
- continue; t... can be -1 for all
- threads.
- c = 'g' for thread used in other
- operations. If zero, pick a thread,
- any thread.
- reply OK for success
- ENN for an error.
-
- read registers g
- reply XX....X Each byte of register data
- is described by two hex digits.
- Registers are in the internal order
- for GDB, and the bytes in a register
- are in the same order the machine uses.
- or ENN for an error.
-
- write regs GXX..XX Each byte of register data
- is described by two hex digits.
- reply OK for success
- ENN for an error
-
- write reg Pn...=r... Write register n... with value r...,
- which contains two hex digits for each
- byte in the register (target byte
- order).
- reply OK for success
- ENN for an error
- (not supported by all stubs).
-
- read mem mAA..AA,LLLL AA..AA is address, LLLL is length.
- reply XX..XX XX..XX is mem contents
- Can be fewer bytes than requested
- if able to read only part of the data.
- or ENN NN is errno
-
- write mem MAA..AA,LLLL:XX..XX
- AA..AA is address,
- LLLL is number of bytes,
- XX..XX is data
- reply OK for success
- ENN for an error (this includes the case
- where only part of the data was
- written).
-
- write mem XAA..AA,LLLL:XX..XX
- (binary) AA..AA is address,
- LLLL is number of bytes,
- XX..XX is binary data
- reply OK for success
- ENN for an error
-
- continue cAA..AA AA..AA is address to resume
- If AA..AA is omitted,
- resume at same address.
-
- step sAA..AA AA..AA is address to resume
- If AA..AA is omitted,
- resume at same address.
-
- continue with Csig;AA..AA Continue with signal sig (hex signal
- signal number). If ;AA..AA is omitted,
- resume at same address.
-
- step with Ssig;AA..AA Like 'C' but step not continue.
- signal
-
- last signal ? Reply the current reason for stopping.
- This is the same reply as is generated
- for step or cont : SAA where AA is the
- signal number.
-
- detach D Reply OK.
-
- There is no immediate reply to step or cont.
- The reply comes when the machine stops.
- It is SAA AA is the signal number.
-
- or... TAAn...:r...;n...:r...;n...:r...;
- AA = signal number
- n... = register number (hex)
- r... = register contents
- n... = `thread'
- r... = thread process ID. This is
- a hex integer.
- n... = other string not starting
- with valid hex digit.
- gdb should ignore this n,r pair
- and go on to the next. This way
- we can extend the protocol.
- or... WAA The process exited, and AA is
- the exit status. This is only
- applicable for certains sorts of
- targets.
- or... XAA The process terminated with signal
- AA.
- or (obsolete) NAA;tttttttt;dddddddd;bbbbbbbb
- AA = signal number
- tttttttt = address of symbol "_start"
- dddddddd = base of data section
- bbbbbbbb = base of bss section.
- Note: only used by Cisco Systems
- targets. The difference between this
- reply and the "qOffsets" query is that
- the 'N' packet may arrive spontaneously
- whereas the 'qOffsets' is a query
- initiated by the host debugger.
- or... OXX..XX XX..XX is hex encoding of ASCII data. This
- can happen at any time while the
- program is running and the debugger
- should continue to wait for
- 'W', 'T', etc.
-
- thread alive TXX Find out if the thread XX is alive.
- reply OK thread is still alive
- ENN thread is dead
-
- remote restart RXX Restart the remote server
-
- extended ops ! Use the extended remote protocol.
- Sticky -- only needs to be set once.
-
- kill request k
-
- toggle debug d toggle debug flag (see 386 & 68k stubs)
- reset r reset -- see sparc stub.
- reserved <other> On other requests, the stub should
- ignore the request and send an empty
- response ($#<checksum>). This way
- we can extend the protocol and GDB
- can tell whether the stub it is
- talking to uses the old or the new.
- search tAA:PP,MM Search backwards starting at address
- AA for a match with pattern PP and
- mask MM. PP and MM are 4 bytes.
- Not supported by all stubs.
-
- general query qXXXX Request info about XXXX.
- general set QXXXX=yyyy Set value of XXXX to yyyy.
- query sect offs qOffsets Get section offsets. Reply is
- Text=xxx;Data=yyy;Bss=zzz
-
- Responses can be run-length encoded to save space. A '*' means that
- the next character is an ASCII encoding giving a repeat count which
- stands for that many repititions of the character preceding the '*'.
- The encoding is n+29, yielding a printable character where n >=3
- (which is where rle starts to win). Don't use an n > 126.
-
- So
- "0* " means the same as "0000". */
-/* *INDENT-ON* */
-
-
+/* See the GDB User Guide for details of the GDB remote protocol. */
#include "defs.h"
#include "gdb_string.h"
@@ -401,6 +221,13 @@ static void set_remote_protocol_P_packet_cmd PARAMS ((char *args,
static void show_remote_protocol_P_packet_cmd PARAMS ((char *args,
int from_tty));
+static void set_remote_protocol_Z_packet_cmd PARAMS ((char *args,
+ int from_tty,
+ struct cmd_list_element * c));
+
+static void show_remote_protocol_Z_packet_cmd PARAMS ((char *args,
+ int from_tty));
+
@@ -447,17 +274,6 @@ static serial_t remote_desc = NULL;
to denote that the target is in kernel mode. */
static int cisco_kernel_mode = 0;
-/* This variable (available to the user via "set remotebinarydownload")
- dictates whether downloads are sent in binary (via the 'X' packet).
- We assume that the stub can, and attempt to do it. This will be cleared if
- the stub does not understand it. This switch is still needed, though
- in cases when the packet is supported in the stub, but the connection
- does not allow it (i.e., 7-bit serial connection only). */
-static int remote_binary_download = 1;
-
-/* Have we already checked whether binary downloads work? */
-static int remote_binary_checked;
-
/* Maximum number of bytes to read/write at once. The value here
is chosen to fill up a packet (the headers account for the 32). */
#define MAXBUFBYTES(N) (((N)-32)/2)
@@ -558,7 +374,7 @@ set_packet_config_cmd (config, c)
config->support = PACKET_SUPPORT_UNKNOWN;
}
else
- fatal ("Bad enum value");
+ internal_error ("Bad enum value");
}
static void
@@ -657,6 +473,54 @@ show_remote_protocol_P_packet_cmd (args, from_tty)
show_packet_config_cmd (&remote_protocol_P);
}
+/* Should we try the 'Z' (set breakpoint) request? */
+
+static struct packet_config remote_protocol_Z;
+
+static void
+set_remote_protocol_Z_packet_cmd (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
+{
+ set_packet_config_cmd (&remote_protocol_Z, c);
+}
+
+static void
+show_remote_protocol_Z_packet_cmd (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ show_packet_config_cmd (&remote_protocol_Z);
+}
+
+/* Should we try the 'X' (remote binary download) packet?
+
+ This variable (available to the user via "set remote X-packet")
+ dictates whether downloads are sent in binary (via the 'X' packet).
+ We assume that the stub can, and attempt to do it. This will be
+ cleared if the stub does not understand it. This switch is still
+ needed, though in cases when the packet is supported in the stub,
+ but the connection does not allow it (i.e., 7-bit serial connection
+ only). */
+
+static struct packet_config remote_protocol_binary_download;
+
+static void
+set_remote_protocol_binary_download_cmd (char *args,
+ int from_tty,
+ struct cmd_list_element *c)
+{
+ set_packet_config_cmd (&remote_protocol_binary_download, c);
+}
+
+static void
+show_remote_protocol_binary_download_cmd (char *args,
+ int from_tty)
+{
+ show_packet_config_cmd (&remote_protocol_binary_download);
+}
+
/* Tokens for use by the asynchronous signal handlers for SIGINT */
PTR sigint_remote_twice_token;
@@ -1742,7 +1606,7 @@ remote_cisco_section_offsets (text_addr, data_addr, bss_addr,
* Relocate the symbol file for a remote target.
*/
-static void
+void
remote_cisco_objfile_relocate (text_off, data_off, bss_off)
bfd_signed_vma text_off;
bfd_signed_vma data_off;
@@ -1902,13 +1766,14 @@ serial device is attached to the remote system (e.g. /dev/ttya).");
push_target (target); /* Switch to using remote target now */
init_packet_config (&remote_protocol_P);
-
+ init_packet_config (&remote_protocol_Z);
+
general_thread = -2;
continue_thread = -2;
/* Force remote_write_bytes to check whether target supports
binary downloading. */
- remote_binary_checked = 0;
+ init_packet_config (&remote_protocol_binary_download);
/* Without this, some commands which require an active target (such
as kill) won't work. This variable serves (at least) double duty
@@ -1992,13 +1857,14 @@ serial device is attached to the remote system (e.g. /dev/ttya).");
push_target (target); /* Switch to using remote target now */
init_packet_config (&remote_protocol_P);
+ init_packet_config (&remote_protocol_Z);
general_thread = -2;
continue_thread = -2;
/* Force remote_write_bytes to check whether target supports
binary downloading. */
- remote_binary_checked = 0;
+ init_packet_config (&remote_protocol_binary_download);
/* If running asynchronously, set things up for telling the target
to use the extended protocol. This will happen only after the
@@ -2074,6 +1940,7 @@ remote_detach (args, from_tty)
pop_target ();
if (from_tty)
puts_filtered ("Ending remote debugging.\n");
+
}
/* Same as remote_detach, but with async support. */
@@ -3103,41 +2970,52 @@ remote_address_masked (addr)
the whole packet, since many stubs strip the eighth bit and subsequently
compute a wrong checksum, which causes real havoc with remote_write_bytes.
- NOTE: This can still lose if the serial line is not eight-bit clean. In
- cases like this, the user should clear "remotebinarydownload". */
+ NOTE: This can still lose if the serial line is not eight-bit
+ clean. In cases like this, the user should clear "remote
+ X-packet". */
+
static void
check_binary_download (addr)
CORE_ADDR addr;
{
- if (remote_binary_download && !remote_binary_checked)
+ switch (remote_protocol_binary_download.support)
{
- char *buf = alloca (PBUFSIZ);
- char *p;
- remote_binary_checked = 1;
-
- p = buf;
- *p++ = 'X';
- p += hexnumstr (p, (ULONGEST) addr);
- *p++ = ',';
- p += hexnumstr (p, (ULONGEST) 0);
- *p++ = ':';
- *p = '\0';
-
- putpkt_binary (buf, (int) (p - buf));
- getpkt (buf, 0);
-
- if (buf[0] == '\0')
- remote_binary_download = 0;
- }
+ case PACKET_DISABLE:
+ break;
+ case PACKET_ENABLE:
+ break;
+ case PACKET_SUPPORT_UNKNOWN:
+ {
+ char *buf = alloca (PBUFSIZ);
+ char *p;
+
+ p = buf;
+ *p++ = 'X';
+ p += hexnumstr (p, (ULONGEST) addr);
+ *p++ = ',';
+ p += hexnumstr (p, (ULONGEST) 0);
+ *p++ = ':';
+ *p = '\0';
+
+ putpkt_binary (buf, (int) (p - buf));
+ getpkt (buf, 0);
- if (remote_debug)
- {
- if (remote_binary_download)
- fprintf_unfiltered (gdb_stdlog,
- "binary downloading suppported by target\n");
- else
- fprintf_unfiltered (gdb_stdlog,
- "binary downloading NOT suppported by target\n");
+ if (buf[0] == '\0')
+ {
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "binary downloading NOT suppported by target\n");
+ remote_protocol_binary_download.support = PACKET_DISABLE;
+ }
+ else
+ {
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "binary downloading suppported by target\n");
+ remote_protocol_binary_download.support = PACKET_ENABLE;
+ }
+ break;
+ }
}
}
@@ -3182,15 +3060,18 @@ remote_write_bytes (memaddr, myaddr, len)
/* sprintf (buf, "M%lx,%x:", (unsigned long) memaddr, todo); */
memaddr = remote_address_masked (memaddr);
p = buf;
- if (remote_binary_download)
+ switch (remote_protocol_binary_download.support)
{
+ case PACKET_ENABLE:
*p++ = 'X';
todo = min (len, max_buf_size);
- }
- else
- {
+ break;
+ case PACKET_DISABLE:
*p++ = 'M';
todo = min (len, max_buf_size / 2); /* num bytes that will fit */
+ break;
+ case PACKET_SUPPORT_UNKNOWN:
+ internal_error ("remote_write_bytes: bad switch");
}
p += hexnumstr (p, (ULONGEST) memaddr);
@@ -3204,50 +3085,57 @@ remote_write_bytes (memaddr, myaddr, len)
/* We send target system values byte by byte, in increasing byte
addresses, each byte encoded as two hex characters (or one
binary character). */
- if (remote_binary_download)
+ switch (remote_protocol_binary_download.support)
{
- int escaped = 0;
- for (i = 0;
- (i < todo) && (i + escaped) < (max_buf_size - 2);
- i++)
- {
- switch (myaddr[i] & 0xff)
- {
- case '$':
- case '#':
- case 0x7d:
- /* These must be escaped */
- escaped++;
- *p++ = 0x7d;
- *p++ = (myaddr[i] & 0xff) ^ 0x20;
- break;
- default:
- *p++ = myaddr[i] & 0xff;
- break;
- }
- }
-
- if (i < todo)
- {
- /* Escape chars have filled up the buffer prematurely,
- and we have actually sent fewer bytes than planned.
- Fix-up the length field of the packet. */
-
- /* FIXME: will fail if new len is a shorter string than
- old len. */
-
- plen += hexnumstr (plen, (ULONGEST) i);
- *plen++ = ':';
- }
- }
- else
- {
- for (i = 0; i < todo; i++)
- {
- *p++ = tohex ((myaddr[i] >> 4) & 0xf);
- *p++ = tohex (myaddr[i] & 0xf);
- }
- *p = '\0';
+ case PACKET_ENABLE:
+ {
+ int escaped = 0;
+ for (i = 0;
+ (i < todo) && (i + escaped) < (max_buf_size - 2);
+ i++)
+ {
+ switch (myaddr[i] & 0xff)
+ {
+ case '$':
+ case '#':
+ case 0x7d:
+ /* These must be escaped */
+ escaped++;
+ *p++ = 0x7d;
+ *p++ = (myaddr[i] & 0xff) ^ 0x20;
+ break;
+ default:
+ *p++ = myaddr[i] & 0xff;
+ break;
+ }
+ }
+
+ if (i < todo)
+ {
+ /* Escape chars have filled up the buffer prematurely,
+ and we have actually sent fewer bytes than planned.
+ Fix-up the length field of the packet. */
+
+ /* FIXME: will fail if new len is a shorter string than
+ old len. */
+
+ plen += hexnumstr (plen, (ULONGEST) i);
+ *plen++ = ':';
+ }
+ break;
+ }
+ case PACKET_DISABLE:
+ {
+ for (i = 0; i < todo; i++)
+ {
+ *p++ = tohex ((myaddr[i] >> 4) & 0xf);
+ *p++ = tohex (myaddr[i] & 0xf);
+ }
+ *p = '\0';
+ break;
+ }
+ case PACKET_SUPPORT_UNKNOWN:
+ internal_error ("remote_write_bytes: bad switch");
}
putpkt_binary (buf, (int) (p - buf));
@@ -4032,7 +3920,52 @@ remote_insert_breakpoint (addr, contents_cache)
{
#ifdef REMOTE_BREAKPOINT
int val;
+#endif
+ int bp_size;
+
+ /* Try the "Z" packet if it is not already disabled.
+ If it succeeds, then set the support to PACKET_ENABLE.
+ If it fails, and the user has explicitly requested the Z support
+ then report an error, otherwise, mark it disabled and go on. */
+
+ if ((remote_protocol_Z.support == PACKET_ENABLE)
+ || (remote_protocol_Z.support == PACKET_SUPPORT_UNKNOWN))
+ {
+ char buf[PBUFSIZ], *p = buf;
+
+ addr = remote_address_masked (addr);
+ *(p++) = 'Z';
+ *(p++) = '0';
+ *(p++) = ',';
+ p += hexnumstr (p, (ULONGEST) addr);
+ BREAKPOINT_FROM_PC (&addr, &bp_size);
+ sprintf (p, ",%d", bp_size);
+
+ putpkt (buf);
+ getpkt (buf, 0);
+
+ if (buf[0] != '\0')
+ {
+ remote_protocol_Z.support = PACKET_ENABLE;
+ return (buf[0] == 'E');
+ }
+
+ /* The stub does not support the 'Z' request. If the user has
+ explicitly requested the Z support, or if the stub previously
+ said it supported the packet, this is an error,
+ otherwise, mark it disabled. */
+
+ else if (remote_protocol_Z.support == PACKET_ENABLE)
+ {
+ error ("Protocol error: Z packet not recognized by stub");
+ }
+ else
+ {
+ remote_protocol_Z.support = PACKET_DISABLE;
+ }
+ }
+#ifdef REMOTE_BREAKPOINT
val = target_read_memory (addr, contents_cache, sizeof big_break_insn);
if (val == 0)
@@ -4056,6 +3989,29 @@ remote_remove_breakpoint (addr, contents_cache)
CORE_ADDR addr;
char *contents_cache;
{
+ char buf[PBUFSIZ];
+ int bp_size;
+
+ if ((remote_protocol_Z.support == PACKET_ENABLE)
+ || (remote_protocol_Z.support == PACKET_SUPPORT_UNKNOWN))
+ {
+ char buf[PBUFSIZ], *p = buf;
+
+ *(p++) = 'z';
+ *(p++) = '0';
+ *(p++) = ',';
+
+ addr = remote_address_masked (addr);
+ p += hexnumstr (p, (ULONGEST) addr);
+ BREAKPOINT_FROM_PC (&addr, &bp_size);
+ sprintf (p, ",%d", bp_size);
+
+ putpkt (buf);
+ getpkt (buf, 0);
+
+ return (buf[0] == 'E');
+ }
+
#ifdef REMOTE_BREAKPOINT
return target_write_memory (addr, contents_cache, sizeof big_break_insn);
#else
@@ -4063,6 +4019,107 @@ remote_remove_breakpoint (addr, contents_cache)
#endif /* REMOTE_BREAKPOINT */
}
+#ifdef TARGET_HAS_HARDWARE_WATCHPOINTS
+int
+remote_insert_watchpoint (addr, len, type)
+ CORE_ADDR addr;
+ int len;
+ int type;
+{
+ char buf[PBUFSIZ], *p;
+
+ if (remote_protocol_Z.support == PACKET_DISABLE)
+ error ("Can't set hardware watchpoints without the 'Z' packet\n");
+
+ sprintf (buf, "Z%x,", type + 2 );
+ p = strchr (buf, '\0');
+ addr = remote_address_masked (addr);
+ p += hexnumstr (p, (ULONGEST) addr);
+ sprintf (p, ",%lx", len);
+
+ putpkt (buf);
+ getpkt (buf, 0);
+
+ if (buf[0] == '\0' || buf [0] == 'E')
+ return -1;
+
+ return 0;
+}
+
+int
+remote_remove_watchpoint (addr, len, type)
+ CORE_ADDR addr;
+ int len;
+ int type;
+{
+ char buf[PBUFSIZ], *p;
+
+ sprintf (buf, "z%x,", type + 2 );
+ p = strchr (buf, '\0');
+ addr = remote_address_masked (addr);
+ p += hexnumstr (p, (ULONGEST) addr);
+ sprintf (p, ",%lx", len);
+ putpkt (buf);
+ getpkt (buf, 0);
+
+ if (buf[0] == '\0' || buf [0] == 'E')
+ return -1;
+
+ return 0;
+}
+
+int
+remote_insert_hw_breakpoint (addr, len)
+ CORE_ADDR addr;
+ int len;
+{
+ char buf[PBUFSIZ], *p = buf;
+
+ if (remote_protocol_Z.support == PACKET_DISABLE)
+ error ("Can't set hardware breakpoints without the 'Z' packet\n");
+
+ *(p++) = 'Z';
+ *(p++) = '1';
+ *(p++) = ',';
+
+ addr = remote_address_masked (addr);
+ p += hexnumstr (p, (ULONGEST) addr);
+ *p = '\0';
+
+ putpkt (buf);
+ getpkt (buf, 0);
+
+ if (buf[0] == '\0' || buf [0] == 'E')
+ return -1;
+
+ return 0;
+}
+
+int
+remote_remove_hw_breakpoint (addr, len)
+ CORE_ADDR addr;
+ int len;
+{
+ char buf[PBUFSIZ], *p = buf;
+
+ *(p++) = 'z';
+ *(p++) = '1';
+ *(p++) = ',';
+
+ addr = remote_address_masked (addr);
+ p += hexnumstr (p, (ULONGEST) addr);
+ *p = '\0';
+
+ putpkt(buf);
+ getpkt (buf, 0);
+
+ if (buf[0] == '\0' || buf [0] == 'E')
+ return -1;
+
+ return 0;
+}
+#endif
+
/* Some targets are only capable of doing downloads, and afterwards
they switch to the remote serial protocol. This function provides
a clean way to get from the download target to the remote target.
@@ -4287,6 +4344,59 @@ remote_query (query_type, buf, outbuf, bufsiz)
}
static void
+remote_rcmd (char *command,
+ struct gdb_file *outbuf)
+{
+ int i;
+ char *buf = alloca (PBUFSIZ);
+ char *p = buf;
+
+ if (!remote_desc)
+ error ("remote rcmd is only available after target open");
+
+ /* The query prefix */
+ strcpy (buf, "qRcmd,");
+ p = strchr (buf, '\0');
+
+ if ((strlen (buf) + strlen (command) * 2 + 8/*misc*/) > PBUFSIZ)
+ error ("\"monitor\" command ``%s'' is too long\n", command);
+
+ /* Encode the actual command */
+ for (i = 0; command[i]; i++)
+ {
+ *p++ = tohex ((command[i] >> 4) & 0xf);
+ *p++ = tohex (command[i] & 0xf);
+ }
+ *p = '\0';
+
+ if (putpkt (buf) < 0)
+ error ("Communication problem with target\n");
+
+ /* get/display the response */
+ while (1)
+ {
+ /* XXX - see also tracepoint.c:remote_get_noisy_reply() */
+ buf[0] = '\0';
+ getpkt (buf, 0);
+ if (buf[0] == '\0')
+ error ("Target does not support this command\n");
+ if (buf[0] == 'O' && buf[1] != 'K')
+ {
+ remote_console_output (buf + 1); /* 'O' message from stub */
+ continue;
+ }
+ if (strcmp (buf, "OK") == 0)
+ break;
+ for (p = buf; p[0] != '\0' && p[1] != '\0'; p += 2)
+ {
+ char c = (fromhex (p[0]) << 4) + fromhex (p[1]);
+ fputc_unfiltered (c, outbuf);
+ }
+ break;
+ }
+}
+
+static void
packet_command (args, from_tty)
char *args;
int from_tty;
@@ -4498,6 +4608,7 @@ Specify the serial device it is connected to (e.g. /dev/ttya).";
remote_ops.to_find_new_threads = remote_threads_info;
remote_ops.to_stop = remote_stop;
remote_ops.to_query = remote_query;
+ remote_ops.to_rcmd = remote_rcmd;
remote_ops.to_stratum = process_stratum;
remote_ops.to_has_all_memory = 1;
remote_ops.to_has_memory = 1;
@@ -4623,13 +4734,14 @@ device is attached to the remote system (e.g. host:port).");
push_target (&remote_cisco_ops); /* Switch to using cisco target now */
init_packet_config (&remote_protocol_P);
+ init_packet_config (&remote_protocol_Z);
general_thread = -2;
continue_thread = -2;
/* Force remote_write_bytes to check whether target supports
binary downloading. */
- remote_binary_checked = 0;
+ init_packet_config (&remote_protocol_binary_download);
/* Without this, some commands which require an active target (such
as kill) won't work. This variable serves (at least) double duty
@@ -4952,6 +5064,7 @@ Specify the serial device it is connected to (e.g. /dev/ttya).";
remote_async_ops.to_find_new_threads = remote_threads_info;
remote_async_ops.to_stop = remote_stop;
remote_async_ops.to_query = remote_query;
+ remote_async_ops.to_rcmd = remote_rcmd;
remote_async_ops.to_stratum = process_stratum;
remote_async_ops.to_has_all_memory = 1;
remote_async_ops.to_has_memory = 1;
@@ -5088,11 +5201,20 @@ in a memory packet.\n",
&setlist),
&showlist);
+ add_packet_config_cmd (&remote_protocol_binary_download,
+ "X", "binary-download",
+ set_remote_protocol_binary_download_cmd,
+ show_remote_protocol_binary_download_cmd,
+ &remote_set_cmdlist, &remote_show_cmdlist);
+#if 0
+ /* XXXX - should ``set remotebinarydownload'' be retained for
+ compatibility. */
add_show_from_set
(add_set_cmd ("remotebinarydownload", no_class,
var_boolean, (char *) &remote_binary_download,
"Set binary downloads.\n", &setlist),
&showlist);
+#endif
add_info ("remote-process", remote_info_process,
"Query the remote system for process info.");
@@ -5101,4 +5223,9 @@ in a memory packet.\n",
set_remote_protocol_P_packet_cmd,
show_remote_protocol_P_packet_cmd,
&remote_set_cmdlist, &remote_show_cmdlist);
+
+ add_packet_config_cmd (&remote_protocol_Z, "Z", "breakpoint",
+ set_remote_protocol_Z_packet_cmd,
+ show_remote_protocol_Z_packet_cmd,
+ &remote_set_cmdlist, &remote_show_cmdlist);
}