binutils: support for the SPARC M8 processor

This patch adds support for the new SPARC M8 processor (implementing OSA
2017) to binutils.

New instructions:

- Dictionary Unpack

  + dictunpack

- Partitioned Compare with shifted result

  + Signed variants:   fpcmp{le,gt,eq,ne}{8,16,32}shl
  + Unsigned variants: fpcmpu{le,gt}{8,16,32}shl

- Partitioned Dual-Equal compared, with shifted result

  + fpcmpde{8,16,32}shl

- Partitioned Unsigned Range Compare, with shifted result

  + fpcmpur{8,16,32}shl

- 64-bit shifts on Floating-Point registers

  + fps{ll,ra,rl}64x

- Misaligned loads and stores

  + ldm{sh,uh,sw,uw,x,ux}
  + ldm{sh,uh,sw,uw,x,ux}a
  + ldmf{s,d}
  + ldmf{s,d}a

  + stm{h,w,x}
  + stm{h,w,x}a
  + stmf{s,d}
  + stmf{s,d}a

- Oracle Numbers

  + on{add,sub,mul,div}

- Reverse Bytes/Bits

  + revbitsb
  + revbytes{h,w,x}

- Run-Length instructions

  + rle_burst
  + rle_length

- New crypto instructions

  + sha3

- Instruction to read the new register %entropy

  + rd %entropy

New Alternate Address Identifiers:

- 0x24, #ASI_CORE_COMMIT_COUNT
- 0x24, #ASI_CORE_SELECT_COUNT
- 0x48, #ASI_ARF_ECC_REG
- 0x53, #ASI_ITLB_PROBE
- 0x58, #ASI_DSFAR
- 0x5a, #ASI_DTLB_PROBE_PRIMARY
- 0x5b, #ASI_DTLB_PROBE_REAL
- 0x64, #ASI_CORE_SELECT_COMMIT_NHT

The new assembler command-line options for selecting the M8 architecture
are:

-Av9m8 or -Asparc6 for 64-bit binaries.
-Av8plusm8 for 32-bit (v8+) binaries.

The corresponding disassembler command-line options are:

-msparc:v9m8 for 64-bit binaries.
-msparc:v8plusm8 for 32-bit (v8+) binaries.

Tested for regressions in the following targets:
sparc-aout sparc-linux sparc-vxworks sparc64-linux

bfd/ChangeLog:

2017-05-19  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* archures.c (bfd_mach_sparc_v9m8): Define.
	(bfd_mach_sparc_v8plusm8): Likewise.
	(bfd_mach_sparc_v9_p): Adjust to M8.
	(bfd_mach_sparc_64bit_p): Likewise.
	* aoutx.h (machine_type): Handle bfd_mach_sparc_v9m8 and
	bfd_mach_sparc_v8plusm8.
	* bfd-in2.h: Regenerated.
	* cpu-sparc.c (arch_info_struct): Entries for sparc:v9m8 and
	sparc:v8plusm8.
	* elfxx-sparc.c (_bfd_sparc_elf_object_p): Handle
	bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8 using the new hw
	capabilities ONADDSUB, ONMUL, ONDIV, DICTUNP, FPCPSHL, RLE and
	SHA3.
	* elf32-sparc.c (elf32_sparc_final_write_processing): Handle
	bfd_mach_sparc_v8plusm8.

binutils/ChangeLog:

2017-05-19  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* NEWS: Mention the SPARC M8 support.

gas/ChangeLog:

2017-05-19  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config/tc-sparc.c (sparc_arch_table): Entries for `sparc6',
	`v9m8' and `v8plusm8'.
	(sparc_md_end): Handle SPARC_OPCODE_ARCH_M8.
	(get_hwcap_name): Support the M8 hardware capabilities.
	(sparc_ip): Handle new operand types.
	* doc/c-sparc.texi (Sparc-Opts): Document -Av9m8, -Av8plusm8 and
	-Asparc6, and the corresponding -xarch aliases.
	* testsuite/gas/sparc/sparc6.s: New file.
	* testsuite/gas/sparc/sparc6.d: Likewise.
	* testsuite/gas/sparc/sparc6-diag.s: Likewise.
	* testsuite/gas/sparc/sparc6-diag.l: Likewise.
	* testsuite/gas/sparc/fpcmpshl.s: Likewise.
	* testsuite/gas/sparc/fpcmpshl.d: Likewise.
	* testsuite/gas/sparc/fpcmpshl-diag.s: Likewise.
	* testsuite/gas/sparc/fpcmpshl-diag.l: Likewise.
	* testsuite/gas/sparc/ldm-stm.s: Likewise.
	* testsuite/gas/sparc/ldm-stm.d: Likewise.
	* testsuite/gas/sparc/ldm-stm-diag.s: Likewise.
	* testsuite/gas/sparc/ldm-stm-diag.l: Likewise.
	* testsuite/gas/sparc/ldmf-stmf.s: Likewise.
	* testsuite/gas/sparc/ldmf-stmf.d: Likewise.
	* testsuite/gas/sparc/ldmf-stmf-diag.s: Likewise.
	* testsuite/gas/sparc/ldmf-stmf-diag.l: Likewise.
	* testsuite/gas/sparc/on.s: Likewise.
	* testsuite/gas/sparc/on.d: Likewise.
	* testsuite/gas/sparc/on-diag.s: Likewise.
	* testsuite/gas/sparc/on-diag.l: Likewise.
	* testsuite/gas/sparc/rle.s: Likewise.
	* testsuite/gas/sparc/rle.d: Likewise.
	* testsuite/gas/sparc/sparc.exp (gas_64_check): Run new tests.
	* testsuite/gas/sparc/rdasr.s: Add test for RDENTROPY.
	* testsuite/gas/sparc/rdasr.d: Likewise.

include/ChangeLog:

2017-05-19  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* elf/sparc.h (ELF_SPARC_HWCAP2_SPARC6): Define.
	(ELF_SPARC_HWCAP2_ONADDSUB): Likewise.
	(ELF_SPARC_HWCAP2_ONMUL): Likewise.
	(ELF_SPARC_HWCAP2_ONDIV): Likewise.
	(ELF_SPARC_HWCAP2_DICTUNP): Likewise.
	(ELF_SPARC_HWCAP2_FPCMPSHL): Likewise.
	(ELF_SPARC_HWCAP2_RLE): Likewise.
	(ELF_SPARC_HWCAP2_SHA3): Likewise.
	* opcode/sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_M8
	and adjust SPARC_OPCODE_ARCH_MAX.
	(HWCAP2_SPARC6): Define.
	(HWCAP2_ONADDSUB): Likewise.
	(HWCAP2_ONMUL): Likewise.
	(HWCAP2_ONDIV): Likewise.
	(HWCAP2_DICTUNP): Likewise.
	(HWCAP2_FPCMPSHL): Likewise.
	(HWCAP2_RLE): Likewise.
	(HWCAP2_SHA3): Likewise.
	(OPM): Likewise.
	(OPMI): Likewise.
	(ONFCN): Likewise.
	(REVFCN): Likewise.
	(SIMM10): Likewise.

opcodes/ChangeLog:

2017-05-19  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-dis.c (MASK_V9): Include SPARC_OPCODE_ARCH_M8.
	(X_IMM2): Define.
	(compute_arch_mask): Handle bfd_mach_sparc_v8plusm8 and
	bfd_mach_sparc_v9m8.
	(print_insn_sparc): Handle new operand types.
	* sparc-opc.c (MASK_M8): Define.
	(v6): Add MASK_M8.
	(v6notlet): Likewise.
	(v7): Likewise.
	(v8): Likewise.
	(v9): Likewise.
	(v9a): Likewise.
	(v9b): Likewise.
	(v9c): Likewise.
	(v9d): Likewise.
	(v9e): Likewise.
	(v9v): Likewise.
	(v9m): Likewise.
	(v9andleon): Likewise.
	(m8): Define.
	(HWS_VM8): Define.
	(HWS2_VM8): Likewise.
	(sparc_opcode_archs): Add entry for "m8".
	(sparc_opcodes): Add OSA2017 and M8 instructions
	dictunpack, fpcmp{ule,ugt,eq,ne,de,ur}{8,16,32}shl,
	fpx{ll,ra,rl}64x,
	ldm{sh,uh,sw,uw,x,ux}, ldm{sh,uh,sw,uw,x,ux}a, ldmf{s,d},
	ldmf{s,d}a, on{add,sub,mul,div}, rdentropy, revbitsb,
	revbytes{h,w,x}, rle_burst, rle_length, sha3, stm{h,w,x},
	stm{h,w,x}a, stmf{s,d}, stmf{s,d}a.
	(asi_table): New M8 ASIs ASI_CORE_COMMIT_COUNT,
	ASI_CORE_SELECT_COUNT, ASI_ARF_ECC_REG, ASI_ITLB_PROBE, ASI_DSFAR,
	ASI_DTLB_PROBE_PRIMARY, ASI_DTLB_PROBE_REAL,
	ASI_CORE_SELECT_COMMIT_NHT.

1 files changed, 19 insertions, 9 deletions

diff --git a/gas/doc/c-sparc.texi b/gas/doc/c-sparc.texi
index 1f789cf..2d15239 100644
--- a/gas/doc/c-sparc.texi
+++ b/gas/doc/c-sparc.texi
@@ -71,10 +71,11 @@ is explicitly requested.  SPARC v9 is always incompatible with sparclite.
 @kindex -Asparcvis3
 @kindex -Asparcvis3r
 @item -Av6 | -Av7 | -Av8 | -Aleon | -Asparclet | -Asparclite
-@itemx -Av8plus | -Av8plusa | -Av8plusb | -Av8plusc | -Av8plusd | -Av8plusv | -Av8plusm
-@itemx -Av9 | -Av9a | -Av9b | -Av9c | -Av9d | -Av9e | -Av9v | -Av9m
+@itemx -Av8plus | -Av8plusa | -Av8plusb | -Av8plusc | -Av8plusd |
+@itemx -Av8plusv | -Av8plusm | -Av8plusm8
+@itemx -Av9 | -Av9a | -Av9b | -Av9c | -Av9d | -Av9e | -Av9v | -Av9m | -Av9m8
 @itemx -Asparc | -Asparcvis | -Asparcvis2 | -Asparcfmaf | -Asparcima
-@itemx -Asparcvis3 | -Asparcvis3r | -Asparc5
+@itemx -Asparcvis3 | -Asparcvis3r | -Asparc5 | -Asparc6
 Use one of the @samp{-A} options to select one of the SPARC
 architectures explicitly.  If you select an architecture explicitly,
 @code{@value{AS}} reports a fatal error if it encounters an instruction
@@ -113,6 +114,10 @@ enabled by @samp{-Av8pluse} and @samp{-Av9e}.
 xmpmul, xmontmul and xmontsqr instructions, as well as the instructions
 enabled by @samp{-Av8plusv} and @samp{-Av9v}.
 
+@samp{-Av8plusm8} and @samp{-Av9m8} enable the instructions introduced
+in the Oracle SPARC Architecture 2017 and the M8 processor, as
+well as the instructions enabled by @samp{-Av8plusm} and @samp{-Av9m}.
+
 @samp{-Asparc} specifies a v9 environment.  It is equivalent to
 @samp{-Av9} if the word size is 64-bit, and @samp{-Av8plus} otherwise.
 
@@ -136,17 +141,22 @@ and floating point unfused multiply-add instructions enabled.
 
 @samp{-Asparc5} is equivalent to @samp{-Av9m}.
 
+@samp{-Asparc6} is equivalent to @samp{-Av9m8}.
+
 @item -xarch=v8plus | -xarch=v8plusa | -xarch=v8plusb | -xarch=v8plusc
-@itemx -xarch=v8plusd | -xarch=v8plusv | -xarch=v8plusm | -xarch=v9 | -xarch=v9a
-@itemx -xarch=v9b | -xarch=v9c | -xarch=v9d | -xarch=v9e | -xarch=v9v | -xarch=v9m
+@itemx -xarch=v8plusd | -xarch=v8plusv | -xarch=v8plusm |
+@itemx -xarch=v8plusm8 | -xarch=v9 | -xarch=v9a | -xarch=v9b
+@itemx -xarch=v9c | -xarch=v9d | -xarch=v9e | -xarch=v9v
+@itemx -xarch=v9m | -xarch=v9m8
 @itemx -xarch=sparc | -xarch=sparcvis | -xarch=sparcvis2
 @itemx -xarch=sparcfmaf | -xarch=sparcima | -xarch=sparcvis3
-@itemx -xarch=sparcvis3r | -xarch=sparc5
+@itemx -xarch=sparcvis3r | -xarch=sparc5 | -xarch=sparc6
 For compatibility with the SunOS v9 assembler.  These options are
 equivalent to -Av8plus, -Av8plusa, -Av8plusb, -Av8plusc, -Av8plusd,
--Av8plusv, -Av8plusm, -Av9, -Av9a, -Av9b, -Av9c, -Av9d, -Av9e, -Av9v, -Av9m,
--Asparc, -Asparcvis, -Asparcvis2, -Asparcfmaf, -Asparcima,
--Asparcvis3, and -Asparcvis3r, respectively.
+-Av8plusv, -Av8plusm, -Av8plusm8, -Av9, -Av9a, -Av9b, -Av9c, -Av9d,
+-Av9e, -Av9v, -Av9m, -Av9m8, -Asparc, -Asparcvis, -Asparcvis2,
+-Asparcfmaf, -Asparcima, -Asparcvis3, -Asparcvis3r, -Asparc5 and
+-Asparc6 respectively.
 
 @item -bump
 Warn whenever it is necessary to switch to another level.