19990502 sourceware importbinu_ss_19990502

1 files changed, 507 insertions, 0 deletions

diff --git a/bfd/rs6000-core.c b/bfd/rs6000-core.c
new file mode 100644
index 0000000..b20555f
--- /dev/null
+++ b/bfd/rs6000-core.c
@@ -0,0 +1,507 @@
+/* IBM RS/6000 "XCOFF" back-end for BFD.
+   Copyright 1990, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+   FIXME: Can someone provide a transliteration of this name into ASCII?
+   Using the following chars caused a compiler warning on HIUX (so I replaced
+   them with octal escapes), and isn't useful without an understanding of what
+   character set it is.
+   Written by Metin G. Ozisik, Mimi Ph\373\364ng-Th\345o V\365, 
+     and John Gilmore.
+   Archive support from Damon A. Permezel.
+   Contributed by IBM Corporation and Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This port currently only handles reading object files, except when
+   compiled on an RS/6000 host.  -- no archive support, no core files.
+   In all cases, it does not support writing.
+
+   FIXMEmgo comments are left from Metin Ozisik's original port.
+
+   This is in a separate file from coff-rs6000.c, because it includes
+   system include files that conflict with coff/rs6000.h.
+  */
+
+/* Internalcoff.h and coffcode.h modify themselves based on this flag.  */
+#define RS6000COFF_C 1
+
+/* The AIX 4.1 kernel is obviously compiled with -D_LONG_LONG, so
+   we have to define _LONG_LONG for older versions of gcc to get the
+   proper alignments in the user structure.  */
+#if defined(_AIX41) && !defined(_LONG_LONG)
+#define _LONG_LONG
+#endif
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+
+#ifdef AIX_CORE
+
+/* AOUTHDR is defined by the above.  We need another defn of it, from the
+   system include files.  Punt the old one and get us a new name for the
+   typedef in the system include files.  */
+#ifdef AOUTHDR
+#undef AOUTHDR
+#endif
+#define	AOUTHDR	second_AOUTHDR
+
+#undef	SCNHDR
+
+
+/* ------------------------------------------------------------------------ */
+/*	Support for core file stuff.. 					    */
+/* ------------------------------------------------------------------------ */
+
+#include <sys/user.h>
+#include <sys/ldr.h>
+#include <sys/core.h>
+
+
+/* Number of special purpose registers supported by gdb.  This value
+   should match `tm.h' in gdb directory.  Clean this mess up and use
+   the macros in sys/reg.h.  FIXMEmgo. */
+
+#define	NUM_OF_SPEC_REGS  7
+
+#define	core_hdr(bfd)		(((Rs6kCorData*)(bfd->tdata.any))->hdr)
+
+/* AIX 4.1 Changed the names and locations of a few items in the core file,
+   this seems to be the quickest easiet way to deal with it. 
+
+   Note however that encoding magic addresses (STACK_END_ADDR) is going
+   to be _very_ fragile.  But I don't see any easy way to get that info
+   right now.  */
+#ifdef CORE_VERSION_1
+#define CORE_DATA_SIZE_FIELD c_u.U_dsize
+#define CORE_COMM_FIELD c_u.U_comm
+#define SAVE_FIELD c_mst
+#define	STACK_END_ADDR 0x2ff23000
+#else
+#define CORE_DATA_SIZE_FIELD c_u.u_dsize
+#define CORE_COMM_FIELD c_u.u_comm
+#define SAVE_FIELD c_u.u_save
+#define	STACK_END_ADDR 0x2ff80000
+#endif
+
+/* These are stored in the bfd's tdata */
+typedef struct {
+  struct core_dump hdr;		/* core file header */
+} Rs6kCorData;
+
+static asection *make_bfd_asection PARAMS ((bfd *, CONST char *, flagword,
+					    bfd_size_type, bfd_vma, file_ptr));
+
+static asection *
+make_bfd_asection (abfd, name, flags, _raw_size, vma, filepos)
+     bfd *abfd;
+     CONST char *name;
+     flagword flags;
+     bfd_size_type _raw_size;
+     bfd_vma vma;
+     file_ptr filepos;
+{
+  asection *asect;
+
+  asect = bfd_make_section_anyway (abfd, name);
+  if (!asect)
+    return NULL;
+
+  asect->flags = flags;
+  asect->_raw_size = _raw_size;
+  asect->vma = vma;
+  asect->filepos = filepos;
+  asect->alignment_power = 8;
+
+  return asect;
+}
+
+/* Decide if a given bfd represents a `core' file or not. There really is no
+   magic number or anything like, in rs6000coff. */
+
+const bfd_target *
+rs6000coff_core_p (abfd)
+     bfd *abfd;
+{
+  struct core_dump coredata;
+  struct stat statbuf;
+  bfd_size_type nread;
+  char *tmpptr;
+
+  if (bfd_seek (abfd, 0, SEEK_SET) != 0)
+    return NULL;
+
+  nread = bfd_read (&coredata, 1, sizeof (struct core_dump), abfd);
+  if (nread != sizeof (struct core_dump))
+    {
+      if (bfd_get_error () != bfd_error_system_call)
+	bfd_set_error (bfd_error_wrong_format);
+      return NULL;
+    }
+
+  if (bfd_stat (abfd, &statbuf) < 0)
+    {
+      bfd_set_error (bfd_error_system_call);
+      return NULL;
+    }
+
+  /* If the core file ulimit is too small, the system will first
+     omit the data segment, then omit the stack, then decline to
+     dump core altogether (as far as I know UBLOCK_VALID and LE_VALID
+     are always set) (this is based on experimentation on AIX 3.2).
+     Now, the thing is that GDB users will be surprised
+     if segments just silently don't appear (well, maybe they would
+     think to check "info files", I don't know).
+
+     For the data segment, we have no choice but to keep going if it's
+     not there, since the default behavior is not to dump it (regardless
+     of the ulimit, it's based on SA_FULLDUMP).  But for the stack segment,
+     if it's not there, we refuse to have anything to do with this core
+     file.  The usefulness of a core dump without a stack segment is pretty
+     limited anyway.  */
+     
+  if (!(coredata.c_flag & UBLOCK_VALID)
+      || !(coredata.c_flag & LE_VALID))
+    {
+      bfd_set_error (bfd_error_wrong_format);
+      return NULL;
+    }
+
+  if (!(coredata.c_flag & USTACK_VALID))
+    {
+      bfd_set_error (bfd_error_file_truncated);
+      return NULL;
+    }
+
+  /* Don't check the core file size for a full core, AIX 4.1 includes
+     additional shared library sections in a full core.  */
+  if (!(coredata.c_flag & (FULL_CORE | CORE_TRUNC))
+      && ((bfd_vma)coredata.c_stack + coredata.c_size) != statbuf.st_size)
+    {
+      /* If the size is wrong, it means we're misinterpreting something.  */
+      bfd_set_error (bfd_error_wrong_format);
+      return NULL;
+    }
+
+  /* Sanity check on the c_tab field.  */
+  if ((u_long) coredata.c_tab < sizeof coredata ||
+      (u_long) coredata.c_tab >= statbuf.st_size ||
+      (long) coredata.c_tab >= (long)coredata.c_stack)
+    {
+      bfd_set_error (bfd_error_wrong_format);
+      return NULL;
+    }
+
+  /* Issue warning if the core file was truncated during writing.  */
+  if (coredata.c_flag & CORE_TRUNC)
+    (*_bfd_error_handler) (_("%s: warning core file truncated"),
+			   bfd_get_filename (abfd));
+
+  /* Allocate core file header.  */
+  tmpptr = (char*) bfd_zalloc (abfd, sizeof (Rs6kCorData));
+  if (!tmpptr)
+    return NULL;
+      
+  set_tdata (abfd, tmpptr);
+
+  /* Copy core file header.  */
+  core_hdr (abfd) = coredata;
+
+  /* .stack section. */
+  if (!make_bfd_asection (abfd, ".stack",
+  			  SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS,
+			  (bfd_size_type) coredata.c_size,
+			  (bfd_vma) (STACK_END_ADDR - coredata.c_size),
+			  (file_ptr) coredata.c_stack))
+    return NULL;
+
+  /* .reg section for GPRs and special registers. */
+  if (!make_bfd_asection (abfd, ".reg",
+  			  SEC_HAS_CONTENTS,
+			  (bfd_size_type) ((32 + NUM_OF_SPEC_REGS) * 4),
+			  (bfd_vma) 0,
+			  (file_ptr) ((char *) &coredata.SAVE_FIELD
+				      - (char *) &coredata)))
+    return NULL;
+
+  /* .reg2 section for FPRs (floating point registers). */
+  if (!make_bfd_asection (abfd, ".reg2",
+  			  SEC_HAS_CONTENTS,
+			  (bfd_size_type) 8 * 32,	/* 32 FPRs. */
+			  (bfd_vma) 0,
+			  (file_ptr) ((char *) &coredata.SAVE_FIELD.fpr[0]
+				      - (char *) &coredata)))
+    return NULL;
+
+  /* .ldinfo section.
+     To actually find out how long this section is in this particular
+     core dump would require going down the whole list of struct ld_info's.
+     See if we can just fake it.  */
+  if (!make_bfd_asection (abfd, ".ldinfo",
+  			  SEC_HAS_CONTENTS,
+			  (bfd_size_type) 0x7fffffff,
+			  (bfd_vma) 0,
+			  (file_ptr) coredata.c_tab))
+    return NULL;
+
+#ifndef CORE_VERSION_1
+  /* .data section if present.
+     AIX 3 dumps the complete data section and sets FULL_CORE if the
+     ulimit is large enough, otherwise the data section is omitted.
+     AIX 4 sets FULL_CORE even if the core file is truncated, we have
+     to examine coredata.c_datasize below to find out the actual size of
+     the .data section.  */
+  if (coredata.c_flag & FULL_CORE)
+    {
+      if (!make_bfd_asection (abfd, ".data",
+			      SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS,
+			      (bfd_size_type) coredata.CORE_DATA_SIZE_FIELD,
+			      (bfd_vma)
+				CDATA_ADDR (coredata.CORE_DATA_SIZE_FIELD),
+			      (file_ptr) coredata.c_stack + coredata.c_size))
+	return NULL;
+    }
+#endif
+
+#ifdef CORE_VERSION_1
+  /* AIX 4 adds data sections from loaded objects to the core file,
+     which can be found by examining ldinfo, and anonymously mmapped
+     regions.  */
+  {
+    struct ld_info ldinfo;
+    bfd_size_type ldinfo_size;
+    file_ptr ldinfo_offset = (file_ptr) coredata.c_tab;
+
+    /* .data section from executable.  */
+    if (coredata.c_datasize)
+      {
+	if (!make_bfd_asection (abfd, ".data",
+				SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS,
+				(bfd_size_type) coredata.c_datasize,
+				(bfd_vma)
+				  CDATA_ADDR (coredata.CORE_DATA_SIZE_FIELD),
+				(file_ptr) coredata.c_data))
+	  return NULL;
+      }
+
+    /* .data sections from loaded objects.  */
+    ldinfo_size = (char *) &ldinfo.ldinfo_filename[0]
+		  - (char *) &ldinfo.ldinfo_next;
+    while (1)
+      {
+	if (bfd_seek (abfd, ldinfo_offset, SEEK_SET) != 0)
+	  return NULL;
+	if (bfd_read (&ldinfo, ldinfo_size, 1, abfd) != ldinfo_size)
+	  return NULL;
+	if (ldinfo.ldinfo_core)
+	  {
+	    if (!make_bfd_asection (abfd, ".data",
+				    SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS,
+				    (bfd_size_type) ldinfo.ldinfo_datasize,
+				    (bfd_vma) ldinfo.ldinfo_dataorg,
+				    (file_ptr) ldinfo.ldinfo_core))
+	      return NULL;
+	  }
+	if (ldinfo.ldinfo_next == 0)
+	  break;
+	ldinfo_offset += ldinfo.ldinfo_next;
+      }
+
+    /* .vmdata sections from anonymously mmapped regions.  */
+    if (coredata.c_vmregions)
+      {
+	int i;
+
+	if (bfd_seek (abfd, (file_ptr) coredata.c_vmm, SEEK_SET) != 0)
+	  return NULL;
+
+	for (i = 0; i < coredata.c_vmregions; i++)
+	  {
+	    struct vm_info vminfo;
+
+	    if (bfd_read (&vminfo, sizeof (vminfo), 1, abfd) != sizeof (vminfo))
+	      return NULL;
+	    if (vminfo.vminfo_offset)
+	      {
+		if (!make_bfd_asection (abfd, ".vmdata",
+					SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS,
+					(bfd_size_type) vminfo.vminfo_size,
+					(bfd_vma) vminfo.vminfo_addr,
+					(file_ptr) vminfo.vminfo_offset))
+		  return NULL;
+	      }
+	  }
+      }
+  }
+#endif
+
+  return abfd->xvec;				/* this is garbage for now. */
+}
+
+
+
+/* return `true' if given core is from the given executable.. */
+boolean
+rs6000coff_core_file_matches_executable_p (core_bfd, exec_bfd)
+     bfd *core_bfd;
+     bfd *exec_bfd;
+{
+  struct core_dump coredata;
+  struct ld_info ldinfo;
+  bfd_size_type size;
+  char *path, *s;
+  size_t alloc;
+  const char *str1, *str2;
+  boolean ret;
+
+  if (bfd_seek (core_bfd, 0, SEEK_SET) != 0
+      || bfd_read (&coredata, sizeof coredata, 1, core_bfd) != sizeof coredata)
+    return false;
+
+  if (bfd_seek (core_bfd, (long) coredata.c_tab, SEEK_SET) != 0)
+    return false;
+
+  size = (char *) &ldinfo.ldinfo_filename[0] - (char *) &ldinfo.ldinfo_next;
+  if (bfd_read (&ldinfo, size, 1, core_bfd) != size)
+    return false;
+
+  alloc = 100;
+  path = bfd_malloc (alloc);
+  if (path == NULL)
+    return false;
+  s = path;
+
+  while (1)
+    {
+      if (bfd_read (s, 1, 1, core_bfd) != 1)
+	{
+	  free (path);
+	  return false;
+	}
+      if (*s == '\0')
+	break;
+      ++s;
+      if (s == path + alloc)
+	{
+	  char *n;
+
+	  alloc *= 2;
+	  n = bfd_realloc (path, alloc);
+	  if (n == NULL)
+	    {
+	      free (path);
+	      return false;
+	    }
+	  s = n + (path - s);
+	  path = n;
+	}
+    }
+  
+  str1 = strrchr (path, '/');
+  str2 = strrchr (exec_bfd->filename, '/');
+
+  /* step over character '/' */
+  str1 = str1 != NULL ? str1 + 1 : path;
+  str2 = str2 != NULL ? str2 + 1 : exec_bfd->filename;
+
+  if (strcmp (str1, str2) == 0)
+    ret = true;
+  else
+    ret = false;
+
+  free (path);
+
+  return ret;
+}
+
+char *
+rs6000coff_core_file_failing_command (abfd)
+     bfd *abfd;
+{
+  char *com = core_hdr (abfd).CORE_COMM_FIELD;
+  if (*com)
+    return com;
+  else
+    return 0;
+}
+
+int
+rs6000coff_core_file_failing_signal (abfd)
+     bfd *abfd;
+{
+  return core_hdr (abfd).c_signo;
+}
+
+
+boolean
+rs6000coff_get_section_contents (abfd, section, location, offset, count)
+     bfd *abfd;
+     sec_ptr section;
+     PTR location;
+     file_ptr offset;
+     bfd_size_type count;
+{
+    if (count == 0)
+	return true;
+
+    /* Reading a core file's sections will be slightly different. For the
+       rest of them we can use bfd_generic_get_section_contents () I suppose. */
+    /* Make sure this routine works for any bfd and any section. FIXMEmgo. */
+
+    if (abfd->format == bfd_core && strcmp (section->name, ".reg") == 0) {
+
+      struct mstsave mstatus;
+      int    regoffset = (char*)&mstatus.gpr[0] - (char*)&mstatus;
+
+      /* Assert that the only way this code will be executed is reading the
+         whole section. */
+      if (offset || count != (sizeof(mstatus.gpr) + (4 * NUM_OF_SPEC_REGS)))
+        (*_bfd_error_handler)
+	  (_("ERROR! in rs6000coff_get_section_contents()\n"));
+
+      /* for `.reg' section, `filepos' is a pointer to the `mstsave' structure
+         in the core file. */
+
+      /* read GPR's into the location. */
+      if ( bfd_seek(abfd, section->filepos + regoffset, SEEK_SET) == -1
+	|| bfd_read(location, sizeof (mstatus.gpr), 1, abfd) != sizeof (mstatus.gpr))
+	return (false); /* on error */
+
+      /* increment location to the beginning of special registers in the section,
+         reset register offset value to the beginning of first special register
+	 in mstsave structure, and read special registers. */
+
+      location = (PTR) ((char*)location + sizeof (mstatus.gpr));
+      regoffset = (char*)&mstatus.iar - (char*)&mstatus;
+
+      if ( bfd_seek(abfd, section->filepos + regoffset, SEEK_SET) == -1
+	|| bfd_read(location, 4 * NUM_OF_SPEC_REGS, 1, abfd) != 
+							4 * NUM_OF_SPEC_REGS)
+	return (false); /* on error */
+      
+      /* increment location address, and read the special registers.. */
+      /* FIXMEmgo */
+      return (true);
+    }
+
+    /* else, use default bfd section content transfer. */
+    else
+      return _bfd_generic_get_section_contents 
+      			(abfd, section, location, offset, count);
+}
+
+#endif /* AIX_CORE */