diff options
Diffstat (limited to 'contrib/bluegnu2.0.3/site.tmpl')
| -rw-r--r-- | contrib/bluegnu2.0.3/site.tmpl | 307 |
1 files changed, 0 insertions, 307 deletions
diff --git a/contrib/bluegnu2.0.3/site.tmpl b/contrib/bluegnu2.0.3/site.tmpl deleted file mode 100644 index 9508c35..0000000 --- a/contrib/bluegnu2.0.3/site.tmpl +++ /dev/null @@ -1,307 +0,0 @@ -# -# site.tmpl -- Sample template for a global config file. -# NOTE: This file contains mostly site specific -# configuration data that is custom to Cygnus -# Support. You'll have to change most of the -# values to work at your site. -# Written by rob@welcomehome.org -# - -# -# transform -- transform a tool name to get the installed name. We only define -# this if there wasn't one. This was the global config file can -# override how the tool names are calculated. -# - -# -# uncomment this if you wish to redefine the transform procedure -# - -#if ![string match "transform" [info procs transform]] then { -# proc transform { name } { -# global target_triplet -# -# if [string match "" $target_triplet] then { -# return $name -# } else { -# return ${target_triplet}-$name -# } -# } -#} - -set noargs 0 -set noresults 0 -set nosignals 0 - -# -# Set default setting for all know targets -# -case "$target_triplet" in { - { "hppa*-*-proelf*" } { - - # By default we'll use the Winbond for testing, use the OKI - # only if explicitly asked for. - case "$target_triplet" in { - { "hppa*-oki-proelf*" } { - set target_abbrev hppro - set targetname op50n - set serialport hellcab:1024 - set netport {} - set baud 9600 - } - default { - set target_abbrev hppro - set targetname w89k - set serialport hellcab:1023 - set netport {} - set baud 9600 - } - } - - # Now stuff that's common to all proelf targets. - # We can't pass arguments or do IO with the PA boards, nor do we - # get status results or signals back from the board. - set noargs 1 - set noresults 1 - set nosignals 1 - set noinferiorio 1 - - # Disgusting hack because directories in libgloss don't - # necessarily match the value in target_cpu. - set target_cpu "pa" - - # The proelf targets are absurdly slow downloading, so we limit - # the number of tests we run on them - set TORTURE_OPTIONS [list \ - { -O0 -g } { -O2 } \ - { -O2 -fomit-frame-pointer -finline-functions -funroll-all-loops }] - - set target_info(target,name) $targetname - set target_info(target,ldflags) "-T$targetname.ld" - set target_info(target,config) "hppa1.1-hp-proelf" - set target_info(target,cflags) "-T$targetname.ld" - set target_info(target,connect) "" - set target_info(target,target) "" - set target_info(target,serial) $serialport - set target_info(target,netport) $netport - set target_info(target,baud) $baud - } - { "i386-*-aout" } { - set target_abbrev aout - set connectmode "" - set targetname "" - set netport "" - set serialport "" - set baud "" - } - { "m68k-mvme135-*" } { # Motorola MVME135 board running Bug monitor - set target_abbrev bug - set connectmode "telnet" - append targetname "s8" - append serialport "/dev/ttyr8" - append netport "termserv:90008" - append baud "9600" - append CFLAGS "-Tmvme135.ld" - append CXXFLAGS "-Tmvme135.ld" - } - { "m68k-idp-*" "m68k-rom68k-*" } { # Motorola IDP board running rom68k monitor - append target_abbrev idp - append connectmode "telnet" - append targetname "s12" - append serialport "/dev/tstty12" - append netport "termserv:900012" - append baud "9600" - append CFLAGS "-Tidp.ld" - append CXXFLAGS "-Tidp.ld" - } - { "m68k-*-aout" } { - append target_abbrev aout - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - { "m68k-est-coff" } { - append target_abbrev est - append connectmode telnet - append targetname est - append serialport /dev/ttyb - append netport "" - append baud 9600 - set noargs 1 - set noresults 1 - set nosignals 1 - append CFLAGS -Tidp.ld - append CXXFLAGS -Tidp.ld - } - { "m68k-cpu32bug-coff" } { - append target_abbrev cpu32bug - append connectmode telnet - append targetname cpu32bug - append serialport /dev/ttyb - append netport "" - append baud 9600 - set noargs 1 - set noresults 1 - set nosignals 1 - append CFLAGS -Tidp.ld - append CXXFLAGS -Tidp.ld - } - { "m68k-*-coff" } { - set target_abbrev rom68k - set connectmode telnet - set targetname rom68k - set serialport /dev/ttya - set netport "" - set baud 9600 - set noargs 1 - set noresults 1 - set nosignals 1 - set CFLAGS -Tidp.ld - set CXXFLAGS -Tidp.ld - } - { "i960-*-nindy" } { - append target_abbrev nind - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - { "m68*-*-vxworks" "m68*-vxworks" } { # Motorola MVME167 board running VxWorks - append target_abbrev vx - append connectmode "telnet" - append targetname "foobar" - append serialport "/dev/tstty16" - append netport "termserv:900016" - append baud "9600" - append CFLAGS "-r" - append CXXFLAGS "-r" - append LDFLAGS "-r" - } - { "m68*-*-spectra" "m68*-spectra-*" } { - append target_abbrev vrtx - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - { "sparc-*-vxworks" } { - append target_abbrev vx - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - append CFLAGS "-r" - append CXXFLAGS "-r" - append LDFLAGS "-r" - } - { "i960-*-vxworks" } { - append target_abbrev vx - append connectmode "telnet" - append targetname "barfoo" - append netport "" - append serialport "" - append baud "9600" - append CFLAGS "-r" - append CXXFLAGS "-r" - append LDFLAGS "-r" - } - { "a29k-*-udi" } { - append target_abbrev udi - append connectmode "mondfe" - append targetname "ser" - append netport "" - append serialport "" - append baud "" - } - { "a29k-isstip-*" } { - append target_abbrev itip - append connectmode "mondfe" - append targetname "isst" - append netport "" - append serialport "" - append baud "" - } - { "mips-idt-ecoff" } { - append target_abbrev mips - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - { "h8300*-*-*" } { - append target_abbrev sim - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - { "h8500*-*-*" } { - append target_abbrev sim - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - { "sh-*-*" } { - append target_abbrev sh - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - { "sparc-*-aout" } { - append target_abbrev aout - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - { "sparclite-*-*" } { - append target_abbrev slite - append connectmode "aload" - append targetname "" - append netport "" - append serialport "" - append baud "" - append CFLAGS "-Tex930" - append CXXFLAGS "" - } - { "sparclitefrwcompat-*-*" } { - append target_abbrev frwcom - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - default { - # For now only run default gdbserver framework for lynx cross - # targets in the future it should be the default for any cross - # targets not explicitly handled above. - if { $host_triplet != $target_triplet } then { - set target_abbrev gdbserver - set targetname extended-remote - append connectmode "" - append netport "" - append serialport "" - append baud "" - } else { - append target_abbrev unix - append connectmode "" - append targetname "" - append netport "" - append serialport "" - append baud "" - } - } -} |