diff options
Diffstat (limited to 'gdb')
819 files changed, 16358 insertions, 7353 deletions
diff --git a/gdb/MAINTAINERS b/gdb/MAINTAINERS index 5e1aada..37e1b4c 100644 --- a/gdb/MAINTAINERS +++ b/gdb/MAINTAINERS @@ -234,7 +234,7 @@ Pedro Alves pedro@palves.net John Baldwin jhb@freebsd.org Kevin Buettner kevinb@redhat.com Andrew Burgess aburgess@redhat.com -Luis Machado luis.machado@arm.com +Luis Machado luis.machado.foss@gmail.com Simon Marchi simon.marchi@polymtl.ca Tom Tromey tom@tromey.com Tom de Vries tdevries@suse.de @@ -320,7 +320,7 @@ the native maintainer when resolving ABI issues. aarch64 --target=aarch64-elf Alan Hayward alan.hayward@arm.com - Luis Machado luis.machado@arm.com + Luis Machado luis.machado.foss@gmail.com alpha --target=alpha-elf @@ -332,7 +332,7 @@ the native maintainer when resolving ABI issues. arm --target=arm-elf Alan Hayward alan.hayward@arm.com - Luis Machado luis.machado@arm.com + Luis Machado luis.machado.foss@gmail.com avr --target=avr @@ -492,7 +492,7 @@ sim/ See sim/MAINTAINERS readline/ Master version: ftp://ftp.cwru.edu/pub/bash/ ALL - Host maintainers (host dependant parts) + Host maintainers (host dependent parts) (but get your changes into the master version) tcl/ tk/ itcl/ ALL @@ -602,15 +602,18 @@ Klaus Gerlicher klaus.gerlicher@intel.com Mircea Gherzan mircea.gherzan@intel.com Paul Gilliam pgilliam@us.ibm.com Tristan Gingold tgingold@free.fr +Timur Golubovich timurgol007@gmail.com Anton Gorenkov xgsa@yandex.ru Raoul Gough RaoulGough@yahoo.co.uk Anthony Green green@redhat.com Matthew Green mrg@eterna.com.au Matthew Gretton-Dann matthew.gretton-dann@arm.com +Aaron Griffith aargri@gmail.com Maxim Grigoriev maxim2405@gmail.com Jerome Guitton guitton@act-europe.fr Alexandra Hájková ahajkova@redhat.com Ben Harris bjh21@netbsd.org +Jannik Hartung peacemakerctf@gmail.com Alan Hayward alan.hayward@arm.com Bernhard Heckel heckel_bernhard@web.de Richard Henderson rth@redhat.com @@ -682,6 +685,7 @@ Fawzi Mohamed fawzi.mohamed@nokia.com Jason Molenda jmolenda@apple.com Chris Moller cmoller@redhat.com Patrick Monnerat patrick@monnerat.net +Pietro Monteiro pietro@sociotechnical.xyz Phil Muldoon pmuldoon@redhat.com Pierre Muller muller@sourceware.org Gaius Mulley gaiusmod2@gmail.com @@ -773,7 +777,7 @@ David Ung davidu@mips.com Shahab Vahedi shahab.vahedi@amd.com D Venkatasubramanian dvenkat@noida.hcltech.com Corinna Vinschen vinschen@redhat.com -Jan Vrany jan.vrany@fit.cvut.cz +Jan Vrany jan.vrany@labware.com Sami Wagiaalla swagiaal@redhat.com Keith Walker keith.walker@arm.com Ricard Wanderlof ricardw@axis.com diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 77e03e4..7654fb1 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -265,7 +265,7 @@ INCSUPPORT = \ -I.. # -# CLI sub directory definitons +# CLI sub directory definitions # SUBDIR_CLI_SRCS = \ cli/cli-cmds.c \ @@ -282,7 +282,7 @@ SUBDIR_CLI_SRCS = \ SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS)) # -# MI sub directory definitons +# MI sub directory definitions # SUBDIR_MI_SRCS = \ mi/mi-cmd-break.c \ @@ -350,7 +350,7 @@ SUBDIR_GCC_COMPILE_SRCS = \ SUBDIR_GCC_COMPILE_OBS = $(patsubst %.c,%.o,$(filter %.c,$(SUBDIR_GCC_COMPILE_SRCS))) # -# Guile sub directory definitons for guile support. +# Guile sub directory definitions for guile support. # SUBDIR_GUILE_SRCS = \ guile/guile.c \ @@ -387,7 +387,7 @@ SUBDIR_GUILE_LDFLAGS = SUBDIR_GUILE_CFLAGS = # -# python sub directory definitons +# python sub directory definitions # SUBDIR_PYTHON_SRCS = \ python/py-arch.c \ @@ -492,7 +492,6 @@ SELFTESTS_SRCS = \ unittests/ui-file-selftests.c \ unittests/unique_xmalloc_ptr_char.c \ unittests/unpack-selftests.c \ - unittests/utils-selftests.c \ unittests/vec-utils-selftests.c \ unittests/xml-utils-selftests.c @@ -892,6 +891,7 @@ ALL_TARGET_OBS = \ solib-dsbt.o \ solib-frv.o \ solib-svr4.o \ + solib-svr4-linux.o \ sparc-linux-tdep.o \ sparc-netbsd-tdep.o \ sparc-obsd-tdep.o \ @@ -907,13 +907,22 @@ ALL_TARGET_OBS = \ vax-tdep.o \ windows-tdep.o \ x86-tdep.o \ - xcoffread.o \ xstormy16-tdep.o \ xtensa-config.o \ xtensa-linux-tdep.o \ xtensa-tdep.o \ z80-tdep.o +# Object files for reading specific types of debug information. +coff_SRCS = coffread.c coff-pe-read.c +dbx_SRCS = dbxread.c +elf_SRCS = elfread.c stap-probe.c dtrace-probe.c +macho_SRCS = machoread.c +mips_SRCS = mipsread.c +xcoff_SRCS = xcoffread.c +FORMAT_SRCS = @FORMAT_SRCS@ +FORMAT_OBS = $(patsubst %.c,%.o,$(FORMAT_SRCS)) + # The following native-target dependent variables are defined on # configure.nat. NAT_FILE = @NAT_FILE@ @@ -1070,8 +1079,6 @@ COMMON_SFILES = \ c-varobj.c \ charset.c \ cli-out.c \ - coff-pe-read.c \ - coffread.c \ complaints.c \ completer.c \ copying.c \ @@ -1085,7 +1092,6 @@ COMMON_SFILES = \ d-lang.c \ d-namespace.c \ d-valprint.c \ - dbxread.c \ dcache.c \ debug.c \ debuginfod-support.c \ @@ -1093,36 +1099,6 @@ COMMON_SFILES = \ disasm.c \ displaced-stepping.c \ dummy-frame.c \ - dwarf2/abbrev.c \ - dwarf2/abbrev-table-cache.c \ - dwarf2/ada-imported.c \ - dwarf2/aranges.c \ - dwarf2/attribute.c \ - dwarf2/cooked-index.c \ - dwarf2/cooked-index-entry.c \ - dwarf2/cooked-index-shard.c \ - dwarf2/cooked-index-worker.c \ - dwarf2/cooked-indexer.c \ - dwarf2/cu.c \ - dwarf2/die.c \ - dwarf2/dwz.c \ - dwarf2/expr.c \ - dwarf2/frame-tailcall.c \ - dwarf2/frame.c \ - dwarf2/index-cache.c \ - dwarf2/index-common.c \ - dwarf2/index-write.c \ - dwarf2/leb.c \ - dwarf2/line-header.c \ - dwarf2/loc.c \ - dwarf2/macro.c \ - dwarf2/parent-map.c \ - dwarf2/read.c \ - dwarf2/read-debug-names.c \ - dwarf2/read-gdb-index.c \ - dwarf2/section.c \ - dwarf2/stringify.c \ - dwarf2/unit-head.c \ extract-store-integer.c \ eval.c \ event-top.c \ @@ -1173,7 +1149,6 @@ COMMON_SFILES = \ maint.c \ maint-test-options.c \ maint-test-settings.c \ - mdebugread.c \ mem-break.c \ memattr.c \ memory-map.c \ @@ -1181,7 +1156,6 @@ COMMON_SFILES = \ memtag.c \ minidebug.c \ minsyms.c \ - mipsread.c \ namespace.c \ objc-lang.c \ objfiles.c \ @@ -1274,7 +1248,6 @@ SFILES = \ d-exp.y \ dtrace-probe.c \ elf-none-tdep.c \ - elfread.c \ f-exp.y \ gcore-elf.c \ gdb.c \ @@ -1510,9 +1483,10 @@ HFILES_NO_SRCDIR = \ solib.h \ solib-aix.h \ solib-darwin.h \ + solib-frv.h \ solib-svr4.h \ + solib-svr4-linux.h \ solib-target.h \ - solist.h \ source.h \ source-cache.h \ sparc-nat.h \ @@ -1900,7 +1874,6 @@ ALLDEPFILES = \ x86-gnu-nat.c \ x86-nat.c \ x86-tdep.c \ - xcoffread.c \ xstormy16-tdep.c \ xtensa-config.c \ xtensa-linux-nat.c \ @@ -1914,6 +1887,40 @@ TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \ $(CONFIG_SRCS) TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR) +# Files that are used to support certain debuginfo formats +DWARF2_SRCS = \ + dwarf2/abbrev.c \ + dwarf2/abbrev-table-cache.c \ + dwarf2/ada-imported.c \ + dwarf2/aranges.c \ + dwarf2/attribute.c \ + dwarf2/cooked-index.c \ + dwarf2/cooked-index-entry.c \ + dwarf2/cooked-index-shard.c \ + dwarf2/cooked-index-worker.c \ + dwarf2/cooked-indexer.c \ + dwarf2/cu.c \ + dwarf2/die.c \ + dwarf2/dwz.c \ + dwarf2/expr.c \ + dwarf2/frame-tailcall.c \ + dwarf2/frame.c \ + dwarf2/index-cache.c \ + dwarf2/index-common.c \ + dwarf2/index-write.c \ + dwarf2/leb.c \ + dwarf2/line-header.c \ + dwarf2/loc.c \ + dwarf2/macro.c \ + dwarf2/parent-map.c \ + dwarf2/read.c \ + dwarf2/read-debug-names.c \ + dwarf2/read-gdb-index.c \ + dwarf2/section.c \ + dwarf2/stringify.c \ + dwarf2/unit-head.c +DWARF2_OBS = $(patsubst %.c,%.o, $(DWARF2_SRCS)) + COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \ mi/mi-common.o \ version.o \ @@ -1921,7 +1928,8 @@ COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \ $(patsubst %.c,%.o,$(COMMON_SFILES)) \ $(SUBDIR_CLI_OBS) \ $(SUBDIR_MI_OBS) \ - $(SUBDIR_TARGET_OBS) + $(SUBDIR_TARGET_OBS) \ + $(FORMAT_OBS) SUBDIRS = doc @subdirs@ data-directory CLEANDIRS = $(SUBDIRS) @@ -35,18 +35,18 @@ a -h or --help option, which prints each options and a brief description. -* On systems that support linkage namespaces, the output of the command +* On systems that support linker namespaces, the output of the command "info sharedlibraries" may add one more column, NS, which identifies the namespace into which the library was loaded, if more than one namespace is active. * New built-in convenience variables $_active_linker_namespaces and - $_current_linker_namespace. These show the number of active linkage + $_linker_namespace. These show the number of active linker namespaces, and the namespace to which the current location belongs to. - In systems that don't support linkage namespaces, these always return 1 - and [[0]] respectively. + In systems that don't support linker namespaces, these always return + the integers 1 and 0 respectively. - * Add record full support for rv64gc architectures +* Add record full support for rv64gc architectures * New commands @@ -59,6 +59,12 @@ maintenance check symtabs maintenance canonicalize Show the canonical form of a C++ name. +maintenance set console-translation-mode <binary|text> +maintenance show console-translation-mode + Controls the translation mode of GDB stdout/stderr. MS-Windows only. In + binary mode, no translation is done. In text mode, a Line Feed is + translated into a Carriage Return-Line Feed combination. + set riscv numeric-register-names on|off show riscv numeric-register-names Controls whether GDB refers to risc-v registers by their numeric names @@ -90,6 +96,18 @@ info sharedlibrary command are now for the full memory range allocated to the shared library. +info threads [-gid] [-stopped] [-running] [ID]... + If no threads match the given ID(s) or filter options, GDB now prints + + No threads matched. + + without printing the provided arguments. The newly added '-stopped' + option makes GDB list the stopped threads only. Similarly, + '-running' makes GDB list the running threads only. If both options + are given together, both stopped and running threads are listed. + These new flags can be useful to get a reduced list when there is a + large number of threads. + * GDB-internal Thread Local Storage (TLS) support ** Linux targets for the x86_64, aarch64, ppc64, s390x, and riscv @@ -112,6 +130,8 @@ info sharedlibrary * Python API + ** GDB no longer supports Python versions less than 3.4. + ** New class gdb.Color for dealing with colors. ** New constant gdb.PARAM_COLOR represents color type of a @@ -128,6 +148,23 @@ info sharedlibrary when output is going to standard output, and False when output is going to a string. + ** Setting the documentation string (__doc__) of a gdb.Parameter + sub-class to the empty string, means GDB will only display the + set_doc or show_doc strings in the set/show help output. + + ** New gdb.ParameterPrefix class. This can be used to create 'set' + and 'show' gdb.Command prefixes, suitable for use with new + gdb.Parameters. + + ** Prefix commands (gdb.Command sub-classes) that don't have an + invoke method will now behave like builtin prefix commands when + invoked without a sub-command name. This means printing the help + text for all sub-commands, unless the prefix command is a 'show' + command, in which case the value of all sub-commands is printed. + + ** New gdb.warning() function that takes a string and prints it as a + warning, with GDB's standard 'warning' prefix. + * Guile API ** New type <gdb:color> for dealing with colors. @@ -135,6 +172,17 @@ info sharedlibrary ** New constant PARAM_COLOR represents color type of a value of a <gdb:parameter> object. Parameter's value is <gdb::color> instance. + ** Eliding the #:doc string from make-parameter now means that GDB + will use a default documentation string. Setting #:doc to the + empty string for make-parameter means GDB will only display the + #:set_doc or #:show_doc strings in the set/show help output. + + ** Prefix commands (using make-command) that don't have a #:invoke + property will now behave like builtin prefix commands when + invoked without a sub-command name. This means printing the help + text for all sub-commands, unless the prefix command is a 'show' + command, in which case the value of all sub-commands is printed. + * New remote packets binary-upload in qSupported reply @@ -143,6 +191,11 @@ binary-upload in qSupported reply stub doesn't report this feature supported, then GDB will not use the 'x' packet. +vFile:lstat + Return information about files on the remote system. Like + vFile:stat but if the filename is a symbolic link, return + information about the link itself, the file the link refers to. + * Changed remote packets qXfer:threads:read @@ -151,6 +204,11 @@ qXfer:threads:read should print as the target ID of the thread, for example in the "info threads" command or when switching to the thread. +vFile:stat + Previously, gdbserver incorrectly implemented this packet using + lstat rather than stat. This has now been corrected. The + documentation has also been clarified. + * MI changes ** The =library-unloaded event now includes the 'ranges' field, which @@ -166,10 +224,31 @@ qXfer:threads:read * Support for stabs debugging format and the a.out/dbx object format is deprecated, and will be removed in GDB 18. +* Configure changes + +--enable-binary-file-formats=[FORMAT,...] +--enable-binary-file-formats=all + A user can now decide to only compile support for certain file formats. + The available formats at this point are: dbx, coff, xcoff, elf, mach-o + and mips. Some targets require specific file formats to be available, + and in such cases, the configure script will warn the user and add + support anyway. By default, all formats will be compiled in, to + continue the behavior from before adding the switch. + * A new configure option was added, allowing support for the compile subsystem to be disabled at configure time, in the form of --disable-gdb-compile. +* A new configure option was added, allowing support for DWARF debug + information to be disabled at configure time. The flag is + --disable-gdb-dwarf-support. + +* A new configure option was added, allowing support for mdebug/ecoff + debug information to be disabled at configure time. The flag to do + that is --disable-gdb-mdebug-support. + +* The Alpha target now supports target descriptions. + *** Changes in GDB 16 * Support for Nios II targets has been removed as this architecture @@ -7545,7 +7624,7 @@ for DW_OP_piece is still missing). A number of long standing bugs that caused GDB to die while starting a Java application have been fixed. GDB's Java support is now -considered "useable". +considered "usable". * GNU/Linux support for fork, vfork, and exec. @@ -417,6 +417,30 @@ more obscure GDB `configure' options are not listed here. There is no convenient way to generate a list of all available targets. +`--enable-binary-file-formats=FORMAT,FORMAT,...' +`--enable-binary-file-formats=all' + Configure GDB to only be be able to read selected file formats. + The special value "all" causes all file formats to be compiled + in, and is the the default behavior of the option. This option + is meant for advanced users who are sure of what they expect, + if you are unsure which options you will need on your debugging + sessions, we recommend that you not use this feature. The + accepted options are: + * coff: Main format on Windows systems, this is required to + compile with windows target support; + * dbx (also known as a.out): Legacy file format, this is + recommended if you know you will be dealing with this + file format; + * elf: Main format on Linux systems, this is heavily + recommended when compiling with linux support; + * macho: Main format on MacOS systems, this is heavily + recommended when compiling for those targets; + * mips (also known as ecoff): Main file format for targets + running on MIPS CPUs, this is heavily recommended when + supporting those targets; + * xcoff: Main format on AIX systems, this is required to + compile for AIX targets and rs6000 CPUs. + `--with-gdb-datadir=PATH' Set the GDB-specific data directory. GDB will look here for certain supporting files or scripts. This defaults to the `gdb' @@ -443,7 +467,14 @@ more obscure GDB `configure' options are not listed here. supported). `--disable-gdb-compile' - Build GDB without support for the 'compile' command. + Build GDB without support for the 'compile' command. DWARF support + is required for this feature. + +`--disable-gdb-dwarf-support' + Build GDB without support for reading DWARF debug information. + +`--disable-gdb-mdebug-support' + Build GDB without support for reading mdebug debug information. `--with-curses' Use the curses library instead of the termcap library, for @@ -533,7 +564,7 @@ more obscure GDB `configure' options are not listed here. GDB scripting much more powerful than the restricted CLI scripting language. If your host does not have Python installed, you can find it on `http://www.python.org/download/'. The oldest - version of Python supported by GDB is 3.2. The optional argument + version of Python supported by GDB is 3.4. The optional argument PYTHON is used to find the Python headers and libraries. It can be either the name of a Python executable, or the name of the directory in which Python is installed. diff --git a/gdb/aarch64-fbsd-nat.c b/gdb/aarch64-fbsd-nat.c index 1746ad1..ecf0bb2 100644 --- a/gdb/aarch64-fbsd-nat.c +++ b/gdb/aarch64-fbsd-nat.c @@ -348,9 +348,7 @@ aarch64_notify_debug_reg_change (ptid_t ptid, } #endif -void _initialize_aarch64_fbsd_nat (); -void -_initialize_aarch64_fbsd_nat () +INIT_GDB_FILE (aarch64_fbsd_nat) { #ifdef HAVE_DBREG aarch64_initialize_hw_point (); diff --git a/gdb/aarch64-fbsd-tdep.c b/gdb/aarch64-fbsd-tdep.c index 07fa38a..db9b82f 100644 --- a/gdb/aarch64-fbsd-tdep.c +++ b/gdb/aarch64-fbsd-tdep.c @@ -239,8 +239,7 @@ aarch64_fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Generic FreeBSD support. */ fbsd_init_abi (info, gdbarch); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); tramp_frame_prepend_unwinder (gdbarch, &aarch64_fbsd_sigframe); @@ -261,9 +260,7 @@ aarch64_fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) } } -void _initialize_aarch64_fbsd_tdep (); -void -_initialize_aarch64_fbsd_tdep () +INIT_GDB_FILE (aarch64_fbsd_tdep) { gdbarch_register_osabi (bfd_arch_aarch64, 0, GDB_OSABI_FREEBSD, aarch64_fbsd_init_abi); diff --git a/gdb/aarch64-linux-nat.c b/gdb/aarch64-linux-nat.c index d7869f4..725c632 100644 --- a/gdb/aarch64-linux-nat.c +++ b/gdb/aarch64-linux-nat.c @@ -1068,9 +1068,7 @@ aarch64_linux_nat_target::is_address_tagged (gdbarch *gdbarch, CORE_ADDR address return gdbarch_tagged_address_p (gdbarch, address); } -void _initialize_aarch64_linux_nat (); -void -_initialize_aarch64_linux_nat () +INIT_GDB_FILE (aarch64_linux_nat) { aarch64_initialize_hw_point (); diff --git a/gdb/aarch64-linux-tdep.c b/gdb/aarch64-linux-tdep.c index a194ac8..dd35eaf 100644 --- a/gdb/aarch64-linux-tdep.c +++ b/gdb/aarch64-linux-tdep.c @@ -23,6 +23,7 @@ #include "extract-store-integer.h" #include "gdbarch.h" #include "glibc-tdep.h" +#include "solib-svr4-linux.h" #include "linux-tdep.h" #include "svr4-tls-tdep.h" #include "aarch64-tdep.h" @@ -2768,9 +2769,7 @@ aarch64_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->lowest_pc = 0x8000; linux_init_abi (info, gdbarch, 1); - - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_lp64_svr4_solib_ops); /* Enable TLS support. */ set_gdbarch_fetch_tls_load_module_address (gdbarch, @@ -3041,9 +3040,7 @@ aarch64_linux_ltag_tests (void) } /* namespace selftests */ #endif /* GDB_SELF_TEST */ -void _initialize_aarch64_linux_tdep (); -void -_initialize_aarch64_linux_tdep () +INIT_GDB_FILE (aarch64_linux_tdep) { gdbarch_register_osabi (bfd_arch_aarch64, 0, GDB_OSABI_LINUX, aarch64_linux_init_abi); diff --git a/gdb/aarch64-nat.h b/gdb/aarch64-nat.h index 3120bca..ec7c564 100644 --- a/gdb/aarch64-nat.h +++ b/gdb/aarch64-nat.h @@ -92,10 +92,6 @@ struct aarch64_nat_target : public BaseTarget int remove_hw_breakpoint (struct gdbarch *gdbarch, struct bp_target_info *bp_tgt) override { return aarch64_remove_hw_breakpoint (gdbarch, bp_tgt); } - - bool watchpoint_addr_within_range (CORE_ADDR addr, CORE_ADDR start, - int length) override - { return start <= addr && start + length - 1 >= addr; } }; #endif /* GDB_AARCH64_NAT_H */ diff --git a/gdb/aarch64-newlib-tdep.c b/gdb/aarch64-newlib-tdep.c index c0ecd3f..5045d5f9 100644 --- a/gdb/aarch64-newlib-tdep.c +++ b/gdb/aarch64-newlib-tdep.c @@ -35,9 +35,7 @@ aarch64_newlib_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->jb_pc = 11; } -void _initialize_aarch64_newlib_tdep (); -void -_initialize_aarch64_newlib_tdep () +INIT_GDB_FILE (aarch64_newlib_tdep) { gdbarch_register_osabi (bfd_arch_aarch64, 0, GDB_OSABI_NEWLIB, aarch64_newlib_init_abi); diff --git a/gdb/aarch64-tdep.c b/gdb/aarch64-tdep.c index 8d54e59..248aa3a 100644 --- a/gdb/aarch64-tdep.c +++ b/gdb/aarch64-tdep.c @@ -4638,7 +4638,7 @@ aarch64_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_sw_breakpoint_from_kind (gdbarch, aarch64_breakpoint::bp_from_kind); set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1); - set_gdbarch_software_single_step (gdbarch, aarch64_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, aarch64_software_single_step); /* Information about registers, etc. */ set_gdbarch_sp_regnum (gdbarch, AARCH64_SP_REGNUM); @@ -4914,9 +4914,7 @@ static void aarch64_process_record_test (void); } #endif -void _initialize_aarch64_tdep (); -void -_initialize_aarch64_tdep () +INIT_GDB_FILE (aarch64_tdep) { gdbarch_register (bfd_arch_aarch64, aarch64_gdbarch_init, aarch64_dump_tdep); diff --git a/gdb/ada-exp.y b/gdb/ada-exp.y index 1546ae9..7ac103d 100644 --- a/gdb/ada-exp.y +++ b/gdb/ada-exp.y @@ -1338,7 +1338,7 @@ write_object_renaming (struct parser_state *par_state, SEARCH_VFT); if (sym_info.symbol == NULL) error (_("Could not find renamed variable: %s"), ada_decode (name).c_str ()); - else if (sym_info.symbol->aclass () == LOC_TYPEDEF) + else if (sym_info.symbol->loc_class () == LOC_TYPEDEF) /* We have a renaming of an old-style renaming symbol. Don't trust the block information. */ sym_info.block = orig_left_context; @@ -1408,7 +1408,7 @@ write_object_renaming (struct parser_state *par_state, SEARCH_VFT); if (index_sym_info.symbol == NULL) error (_("Could not find %s"), index_name); - else if (index_sym_info.symbol->aclass () == LOC_TYPEDEF) + else if (index_sym_info.symbol->loc_class () == LOC_TYPEDEF) /* Index is an old-style renaming symbol. */ index_sym_info.block = orig_left_context; write_var_from_sym (par_state, index_sym_info); @@ -1478,14 +1478,14 @@ block_lookup (const struct block *context, const char *raw_name) = ada_lookup_symbol_list (name, context, SEARCH_FUNCTION_DOMAIN); if (context == NULL - && (syms.empty () || syms[0].symbol->aclass () != LOC_BLOCK)) + && (syms.empty () || syms[0].symbol->loc_class () != LOC_BLOCK)) symtab = lookup_symtab (current_program_space, name); else symtab = NULL; if (symtab != NULL) result = symtab->compunit ()->blockvector ()->static_block (); - else if (syms.empty () || syms[0].symbol->aclass () != LOC_BLOCK) + else if (syms.empty () || syms[0].symbol->loc_class () != LOC_BLOCK) { if (context == NULL) error (_("No file or function \"%s\"."), raw_name); @@ -1511,7 +1511,7 @@ select_possible_type_sym (const std::vector<struct block_symbol> &syms) preferred_index = -1; preferred_type = NULL; for (i = 0; i < syms.size (); i += 1) - switch (syms[i].symbol->aclass ()) + switch (syms[i].symbol->loc_class ()) { case LOC_TYPEDEF: if (ada_prefer_type (syms[i].symbol->type (), preferred_type)) @@ -1555,7 +1555,7 @@ find_primitive_type (struct parser_state *par_state, const char *name) strcpy (expanded_name, "standard__"); strcat (expanded_name, name); sym = ada_lookup_symbol (expanded_name, NULL, SEARCH_TYPE_DOMAIN).symbol; - if (sym != NULL && sym->aclass () == LOC_TYPEDEF) + if (sym != NULL && sym->loc_class () == LOC_TYPEDEF) type = sym->type (); } @@ -1966,7 +1966,7 @@ write_name_assoc (struct parser_state *par_state, struct stoken name) par_state->expression_context_block, SEARCH_VFT); - if (syms.size () != 1 || syms[0].symbol->aclass () == LOC_TYPEDEF) + if (syms.size () != 1 || syms[0].symbol->loc_class () == LOC_TYPEDEF) pstate->push_new<ada_string_operation> (copy_name (name)); else write_var_from_sym (par_state, syms[0]); diff --git a/gdb/ada-lang.c b/gdb/ada-lang.c index 3f5e707..74ac3e3 100644 --- a/gdb/ada-lang.c +++ b/gdb/ada-lang.c @@ -1677,8 +1677,6 @@ ada_decode_symbol (const struct general_symbol_info *arg) void ada_fixup_array_indexes_type (struct type *index_desc_type) { - int i; - if (index_desc_type == NULL) return; gdb_assert (index_desc_type->num_fields () > 0); @@ -1696,13 +1694,13 @@ ada_fixup_array_indexes_type (struct type *index_desc_type) return; /* Fixup each field of INDEX_DESC_TYPE. */ - for (i = 0; i < index_desc_type->num_fields (); i++) + for (auto &field : index_desc_type->fields ()) { - const char *name = index_desc_type->field (i).name (); + const char *name = field.name (); struct type *raw_type = ada_check_typedef (ada_find_any_type (name)); if (raw_type) - index_desc_type->field (i).set_type (raw_type); + field.set_type (raw_type); } } @@ -3639,7 +3637,7 @@ See set/show multiple-symbol.")); if (syms[i].symbol == NULL) continue; - if (syms[i].symbol->aclass () == LOC_BLOCK) + if (syms[i].symbol->loc_class () == LOC_BLOCK) { struct symtab_and_line sal = find_function_start_sal (syms[i].symbol, 1); @@ -3661,7 +3659,7 @@ See set/show multiple-symbol.")); else { int is_enumeral = - (syms[i].symbol->aclass () == LOC_CONST + (syms[i].symbol->loc_class () == LOC_CONST && syms[i].symbol->type () != NULL && syms[i].symbol->type ()->code () == TYPE_CODE_ENUM); struct symtab *symtab = NULL; @@ -3824,7 +3822,7 @@ ada_resolve_variable (struct symbol *sym, const struct block *block, candidates.end (), [] (block_symbol &bsym) { - switch (bsym.symbol->aclass ()) + switch (bsym.symbol->loc_class ()) { case LOC_REGISTER: case LOC_ARG: @@ -3847,7 +3845,7 @@ ada_resolve_variable (struct symbol *sym, const struct block *block, candidates.end (), [] (block_symbol &bsym) { - return bsym.symbol->aclass () == LOC_TYPEDEF; + return bsym.symbol->loc_class () == LOC_TYPEDEF; }), candidates.end ()); } @@ -4002,7 +4000,7 @@ ada_args_match (struct symbol *func, struct value **actuals, int n_actuals) int i; struct type *func_type = func->type (); - if (func->aclass () == LOC_CONST + if (func->loc_class () == LOC_CONST && func_type->code () == TYPE_CODE_ENUM) return (n_actuals == 0); else if (func_type == NULL || func_type->code () != TYPE_CODE_FUNC) @@ -4312,7 +4310,7 @@ ada_parse_renaming (struct symbol *sym, if (sym == NULL) return ADA_NOT_RENAMING; - switch (sym->aclass ()) + switch (sym->loc_class ()) { default: return ADA_NOT_RENAMING; @@ -4778,7 +4776,7 @@ is_nonfunction (const std::vector<struct block_symbol> &syms) for (const block_symbol &sym : syms) if (sym.symbol->type ()->code () != TYPE_CODE_FUNC && (sym.symbol->type ()->code () != TYPE_CODE_ENUM - || sym.symbol->aclass () != LOC_CONST)) + || sym.symbol->loc_class () != LOC_CONST)) return 1; return 0; @@ -4813,10 +4811,10 @@ lesseq_defined_than (struct symbol *sym0, struct symbol *sym1) if (sym0 == sym1) return 1; if (sym0->domain () != sym1->domain () - || sym0->aclass () != sym1->aclass ()) + || sym0->loc_class () != sym1->loc_class ()) return 0; - switch (sym0->aclass ()) + switch (sym0->loc_class ()) { case LOC_UNDEF: return 1; @@ -5071,7 +5069,7 @@ remove_extra_symbols (std::vector<struct block_symbol> &syms) should be identical. */ else if (syms[i].symbol->linkage_name () != NULL - && syms[i].symbol->aclass () == LOC_STATIC + && syms[i].symbol->loc_class () == LOC_STATIC && is_nondebugging_type (syms[i].symbol->type ())) { for (j = 0; !remove_p && j < syms.size (); j += 1) @@ -5080,8 +5078,8 @@ remove_extra_symbols (std::vector<struct block_symbol> &syms) && syms[j].symbol->linkage_name () != NULL && strcmp (syms[i].symbol->linkage_name (), syms[j].symbol->linkage_name ()) == 0 - && (syms[i].symbol->aclass () - == syms[j].symbol->aclass ()) + && (syms[i].symbol->loc_class () + == syms[j].symbol->loc_class ()) && syms[i].symbol->value_address () == syms[j].symbol->value_address ()) remove_p = true; @@ -5090,12 +5088,12 @@ remove_extra_symbols (std::vector<struct block_symbol> &syms) /* Two functions with the same block are identical. */ - else if (syms[i].symbol->aclass () == LOC_BLOCK) + else if (syms[i].symbol->loc_class () == LOC_BLOCK) { for (j = 0; !remove_p && j < syms.size (); j += 1) { if (i != j - && syms[j].symbol->aclass () == LOC_BLOCK + && syms[j].symbol->loc_class () == LOC_BLOCK && (syms[i].symbol->value_block () == syms[j].symbol->value_block ())) remove_p = true; @@ -5172,7 +5170,7 @@ is_package_name (const char *name) static int old_renaming_is_invisible (const struct symbol *sym, const char *function_name) { - if (sym->aclass () != LOC_TYPEDEF) + if (sym->loc_class () != LOC_TYPEDEF) return 0; std::string scope = xget_renaming_scope (sym->type ()); @@ -5251,7 +5249,7 @@ remove_irrelevant_renamings (std::vector<struct block_symbol> *syms, const char *name; const char *suffix; - if (sym == NULL || sym->aclass () == LOC_TYPEDEF) + if (sym == NULL || sym->loc_class () == LOC_TYPEDEF) continue; name = sym->linkage_name (); suffix = strstr (name, "___XR"); @@ -5376,7 +5374,7 @@ match_data::operator() (struct block_symbol *bsym) } else { - if (sym->aclass () == LOC_UNRESOLVED) + if (sym->loc_class () == LOC_UNRESOLVED) return true; else if (sym->is_argument ()) arg_sym = sym; @@ -5981,7 +5979,7 @@ ada_add_block_symbols (std::vector<struct block_symbol> &result, { if (sym->matches (domain)) { - if (sym->aclass () != LOC_UNRESOLVED) + if (sym->loc_class () != LOC_UNRESOLVED) { if (sym->is_argument ()) arg_sym = sym; @@ -6030,7 +6028,7 @@ ada_add_block_symbols (std::vector<struct block_symbol> &result, if (cmp == 0 && is_name_suffix (sym->linkage_name () + name_len + 5)) { - if (sym->aclass () != LOC_UNRESOLVED) + if (sym->loc_class () != LOC_UNRESOLVED) { if (sym->is_argument ()) arg_sym = sym; @@ -7080,17 +7078,16 @@ ada_search_struct_field (const char *name, struct value *arg, int offset, else if (ada_is_variant_part (type, i)) { /* PNH: Do we ever get here? See find_struct_field. */ - int j; struct type *field_type = ada_check_typedef (type->field (i).type ()); int var_offset = offset + type->field (i).loc_bitpos () / 8; - for (j = 0; j < field_type->num_fields (); j += 1) + for (const auto &field : field_type->fields ()) { - struct value *v = ada_search_struct_field /* Force line - break. */ - (name, arg, - var_offset + field_type->field (j).loc_bitpos () / 8, - field_type->field (j).type ()); + struct value *v + = (ada_search_struct_field + (name, arg, + var_offset + field.loc_bitpos () / 8, + field.type ())); if (v != NULL) return v; @@ -8182,12 +8179,11 @@ ada_is_redundant_index_type_desc (struct type *array_type, struct type *desc_type) { struct type *this_layer = check_typedef (array_type); - int i; - for (i = 0; i < desc_type->num_fields (); i++) + for (const auto &field : desc_type->fields ()) { if (!ada_is_redundant_range_encoding (this_layer->index_type (), - desc_type->field (i).type ())) + field.type ())) return 0; this_layer = check_typedef (this_layer->target_type ()); } @@ -8784,9 +8780,9 @@ ada_atr_enum_val (struct expression *exp, enum noside noside, struct type *type, error (_("'Enum_Val requires integral argument")); LONGEST value = value_as_long (arg); - for (int i = 0; i < type->num_fields (); ++i) + for (const auto &field : type->fields ()) { - if (type->field (i).loc_enumval () == value) + if (field.loc_enumval () == value) return value_from_longest (original_type, value); } @@ -10502,7 +10498,6 @@ static LONGEST convert_char_literal (struct type *type, LONGEST val) { char name[12]; - int f; if (type == NULL) return val; @@ -10519,17 +10514,17 @@ convert_char_literal (struct type *type, LONGEST val) else xsnprintf (name, sizeof (name), "QWW%08lx", (unsigned long) val); size_t len = strlen (name); - for (f = 0; f < type->num_fields (); f += 1) + for (const auto &field : type->fields ()) { /* Check the suffix because an enum constant in a package will have a name like "pkg__QUxx". This is safe enough because we already have the correct type, and because mangling means there can't be clashes. */ - const char *ename = type->field (f).name (); + const char *ename = field.name (); size_t elen = strlen (ename); if (elen >= len && strcmp (name, ename + elen - len) == 0) - return type->field (f).loc_enumval (); + return field.loc_enumval (); } return val; } @@ -11712,9 +11707,9 @@ ada_has_this_exception_support (const struct exception_support_info *einfo) /* Make sure that the symbol we found corresponds to a function. */ - if (sym->aclass () != LOC_BLOCK) + if (sym->loc_class () != LOC_BLOCK) error (_("Symbol \"%s\" is not a function (class = %d)"), - sym->linkage_name (), sym->aclass ()); + sym->linkage_name (), sym->loc_class ()); sym = standard_lookup (einfo->catch_handlers_sym, NULL, SEARCH_FUNCTION_DOMAIN); @@ -11734,9 +11729,9 @@ ada_has_this_exception_support (const struct exception_support_info *einfo) /* Make sure that the symbol we found corresponds to a function. */ - if (sym->aclass () != LOC_BLOCK) + if (sym->loc_class () != LOC_BLOCK) error (_("Symbol \"%s\" is not a function (class = %d)"), - sym->linkage_name (), sym->aclass ()); + sym->linkage_name (), sym->loc_class ()); return 1; } @@ -12691,7 +12686,7 @@ ada_exception_sal (enum ada_exception_catchpoint_kind ex) throw_error (NOT_FOUND_ERROR, _("Catchpoint symbol not found: %s"), sym_name); - if (sym->aclass () != LOC_BLOCK) + if (sym->loc_class () != LOC_BLOCK) error (_("Unable to insert catchpoint. %s is not a function."), sym_name); return find_function_start_sal (sym, 1); @@ -12857,10 +12852,10 @@ ada_is_exception_sym (struct symbol *sym) { const char *type_name = sym->type ()->name (); - return (sym->aclass () != LOC_TYPEDEF - && sym->aclass () != LOC_BLOCK - && sym->aclass () != LOC_CONST - && sym->aclass () != LOC_UNRESOLVED + return (sym->loc_class () != LOC_TYPEDEF + && sym->loc_class () != LOC_BLOCK + && sym->loc_class () != LOC_CONST + && sym->loc_class () != LOC_UNRESOLVED && type_name != NULL && strcmp (type_name, "exception") == 0); } @@ -12993,7 +12988,7 @@ ada_add_exceptions_from_frame (compiled_regex *preg, { for (struct symbol *sym : block_iterator_range (block)) { - switch (sym->aclass ()) + switch (sym->loc_class ()) { case LOC_TYPEDEF: case LOC_BLOCK: @@ -13928,9 +13923,7 @@ static const char * const gnat_source_charsets[] = nullptr }; -void _initialize_ada_language (); -void -_initialize_ada_language () +INIT_GDB_FILE (ada_language) { add_setshow_prefix_cmd ("ada", no_class, diff --git a/gdb/ada-tasks.c b/gdb/ada-tasks.c index 2595123..f9551d4 100644 --- a/gdb/ada-tasks.c +++ b/gdb/ada-tasks.c @@ -1650,9 +1650,7 @@ task_apply_command (const char *tidlist, int from_tty) from_tty, flags); } -void _initialize_tasks (); -void -_initialize_tasks () +INIT_GDB_FILE (tasks) { /* Attach various observers. */ gdb::observers::normal_stop.attach (ada_tasks_normal_stop_observer, diff --git a/gdb/ada-typeprint.c b/gdb/ada-typeprint.c index 404d8fe..defd828 100644 --- a/gdb/ada-typeprint.c +++ b/gdb/ada-typeprint.c @@ -702,7 +702,7 @@ print_variant_part (const variant_part &part, name = "?"; else { - name = type->field (part.discriminant_index).name ();; + name = type->field (part.discriminant_index).name (); discr_type = type->field (part.discriminant_index).type (); } diff --git a/gdb/addrmap.c b/gdb/addrmap.c index c625973..4549350 100644 --- a/gdb/addrmap.c +++ b/gdb/addrmap.c @@ -398,20 +398,20 @@ namespace selftests { /* Convert P to CORE_ADDR. */ static CORE_ADDR -core_addr (void *p) +core_addr (const void *p) { - return (CORE_ADDR)(uintptr_t)p; + return (CORE_ADDR) (uintptr_t) p; } /* Check that &ARRAY[LOW]..&ARRAY[HIGH] has VAL in MAP. */ -#define CHECK_ADDRMAP_FIND(MAP, ARRAY, LOW, HIGH, VAL) \ - do \ - { \ - for (unsigned i = LOW; i <= HIGH; ++i) \ - SELF_CHECK (MAP->find (core_addr (&ARRAY[i])) == VAL); \ - } \ - while (0) +static void +check_addrmap_find (const addrmap &map, const char *array, unsigned int low, + unsigned int high, const void *val) +{ + for (unsigned int i = low; i <= high; ++i) + SELF_CHECK (map.find (core_addr (&array[i])) == val); +} /* Entry point for addrmap unit tests. */ @@ -427,25 +427,24 @@ test_addrmap () /* Create mutable addrmap. */ auto_obstack temp_obstack; - auto map = std::make_unique<struct addrmap_mutable> (); - SELF_CHECK (map != nullptr); + addrmap_mutable map; /* Check initial state. */ - CHECK_ADDRMAP_FIND (map, array, 0, 19, nullptr); + check_addrmap_find (map, array, 0, 19, nullptr); /* Insert address range into mutable addrmap. */ - map->set_empty (core_addr (&array[10]), core_addr (&array[12]), val1); - CHECK_ADDRMAP_FIND (map, array, 0, 9, nullptr); - CHECK_ADDRMAP_FIND (map, array, 10, 12, val1); - CHECK_ADDRMAP_FIND (map, array, 13, 19, nullptr); + map.set_empty (core_addr (&array[10]), core_addr (&array[12]), val1); + check_addrmap_find (map, array, 0, 9, nullptr); + check_addrmap_find (map, array, 10, 12, val1); + check_addrmap_find (map, array, 13, 19, nullptr); /* Create corresponding fixed addrmap. */ addrmap_fixed *map2 - = new (&temp_obstack) addrmap_fixed (&temp_obstack, map.get ()); + = new (&temp_obstack) addrmap_fixed (&temp_obstack, &map); SELF_CHECK (map2 != nullptr); - CHECK_ADDRMAP_FIND (map2, array, 0, 9, nullptr); - CHECK_ADDRMAP_FIND (map2, array, 10, 12, val1); - CHECK_ADDRMAP_FIND (map2, array, 13, 19, nullptr); + check_addrmap_find (*map2, array, 0, 9, nullptr); + check_addrmap_find (*map2, array, 10, 12, val1); + check_addrmap_find (*map2, array, 13, 19, nullptr); /* Iterate over both addrmaps. */ auto callback = [&] (CORE_ADDR start_addr, void *obj) @@ -460,29 +459,27 @@ test_addrmap () SELF_CHECK (false); return 0; }; - SELF_CHECK (map->foreach (callback) == 0); + SELF_CHECK (map.foreach (callback) == 0); SELF_CHECK (map2->foreach (callback) == 0); /* Relocate fixed addrmap. */ map2->relocate (1); - CHECK_ADDRMAP_FIND (map2, array, 0, 10, nullptr); - CHECK_ADDRMAP_FIND (map2, array, 11, 13, val1); - CHECK_ADDRMAP_FIND (map2, array, 14, 19, nullptr); + check_addrmap_find (*map2, array, 0, 10, nullptr); + check_addrmap_find (*map2, array, 11, 13, val1); + check_addrmap_find (*map2, array, 14, 19, nullptr); /* Insert partially overlapping address range into mutable addrmap. */ - map->set_empty (core_addr (&array[11]), core_addr (&array[13]), val2); - CHECK_ADDRMAP_FIND (map, array, 0, 9, nullptr); - CHECK_ADDRMAP_FIND (map, array, 10, 12, val1); - CHECK_ADDRMAP_FIND (map, array, 13, 13, val2); - CHECK_ADDRMAP_FIND (map, array, 14, 19, nullptr); + map.set_empty (core_addr (&array[11]), core_addr (&array[13]), val2); + check_addrmap_find (map, array, 0, 9, nullptr); + check_addrmap_find (map, array, 10, 12, val1); + check_addrmap_find (map, array, 13, 13, val2); + check_addrmap_find (map, array, 14, 19, nullptr); } } /* namespace selftests */ #endif /* GDB_SELF_TEST */ -void _initialize_addrmap (); -void -_initialize_addrmap () +INIT_GDB_FILE (addrmap) { #if GDB_SELF_TEST selftests::register_test ("addrmap", selftests::test_addrmap); diff --git a/gdb/agent.c b/gdb/agent.c index 2009980..dd3a557 100644 --- a/gdb/agent.c +++ b/gdb/agent.c @@ -73,9 +73,7 @@ agent_new_objfile (struct objfile *objfile) agent_look_up_symbols (objfile); } -void _initialize_agent (); -void -_initialize_agent () +INIT_GDB_FILE (agent) { gdb::observers::new_objfile.attach (agent_new_objfile, "agent"); diff --git a/gdb/aix-thread.c b/gdb/aix-thread.c index 2fd6121..1e3015d 100644 --- a/gdb/aix-thread.c +++ b/gdb/aix-thread.c @@ -2062,9 +2062,7 @@ aix_thread_target::get_ada_task_ptid (long lwp, ULONGEST thread) /* Module startup initialization function, automagically called by init.c. */ -void _initialize_aix_thread (); -void -_initialize_aix_thread () +INIT_GDB_FILE (aix_thread) { /* Notice when object files get loaded and unloaded. */ gdb::observers::new_objfile.attach (new_objfile, "aix-thread"); diff --git a/gdb/alpha-bsd-nat.c b/gdb/alpha-bsd-nat.c index 85fb525..5f7d3ef 100644 --- a/gdb/alpha-bsd-nat.c +++ b/gdb/alpha-bsd-nat.c @@ -156,9 +156,7 @@ alphabsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) } -void _initialize_alphabsd_nat (); -void -_initialize_alphabsd_nat () +INIT_GDB_FILE (alphabsd_nat) { add_inf_child_target (&the_alpha_bsd_nat_target); diff --git a/gdb/alpha-linux-nat.c b/gdb/alpha-linux-nat.c index 6d9de81..1297a45 100644 --- a/gdb/alpha-linux-nat.c +++ b/gdb/alpha-linux-nat.c @@ -100,9 +100,7 @@ alpha_linux_nat_target::register_u_offset (struct gdbarch *gdbarch, return FPR_BASE + regno - gdbarch_fp0_regnum (gdbarch); } -void _initialize_alpha_linux_nat (); -void -_initialize_alpha_linux_nat () +INIT_GDB_FILE (alpha_linux_nat) { linux_target = &the_alpha_linux_nat_target; add_inf_child_target (&the_alpha_linux_nat_target); diff --git a/gdb/alpha-linux-tdep.c b/gdb/alpha-linux-tdep.c index 2f6affa..8b4b4f1 100644 --- a/gdb/alpha-linux-tdep.c +++ b/gdb/alpha-linux-tdep.c @@ -17,6 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "frame.h" +#include "solib-svr4-linux.h" #include "osabi.h" #include "solib-svr4.h" #include "symtab.h" @@ -369,9 +370,7 @@ alpha_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->jb_elt_size = 8; set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_lp64_svr4_solib_ops); /* Enable TLS support. */ set_gdbarch_fetch_tls_load_module_address (gdbarch, @@ -386,9 +385,7 @@ alpha_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) alpha_linux_gdb_signal_to_target); } -void _initialize_alpha_linux_tdep (); -void -_initialize_alpha_linux_tdep () +INIT_GDB_FILE (alpha_linux_tdep) { gdbarch_register_osabi (bfd_arch_alpha, 0, GDB_OSABI_LINUX, alpha_linux_init_abi); diff --git a/gdb/alpha-netbsd-tdep.c b/gdb/alpha-netbsd-tdep.c index a240039..56143ee 100644 --- a/gdb/alpha-netbsd-tdep.c +++ b/gdb/alpha-netbsd-tdep.c @@ -261,11 +261,10 @@ alphanbsd_init_abi (struct gdbarch_info info, /* NetBSD/alpha does not provide single step support via ptrace(2); we must use software single-stepping. */ - set_gdbarch_software_single_step (gdbarch, alpha_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, alpha_software_single_step); /* NetBSD/alpha has SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); tdep->dynamic_sigtramp_offset = alphanbsd_sigtramp_offset; tdep->pc_in_sigtramp = alphanbsd_pc_in_sigtramp; @@ -279,9 +278,7 @@ alphanbsd_init_abi (struct gdbarch_info info, } -void _initialize_alphanbsd_tdep (); -void -_initialize_alphanbsd_tdep () +INIT_GDB_FILE (alphanbsd_tdep) { /* Even though NetBSD/alpha used ELF since day one, it used the traditional a.out-style core dump format before NetBSD 1.6, but diff --git a/gdb/alpha-obsd-tdep.c b/gdb/alpha-obsd-tdep.c index b5ddbbc..a84dfa8 100644 --- a/gdb/alpha-obsd-tdep.c +++ b/gdb/alpha-obsd-tdep.c @@ -106,11 +106,10 @@ alphaobsd_init_abi(struct gdbarch_info info, struct gdbarch *gdbarch) /* OpenBSD/alpha 3.0 and earlier does not provide single step support via ptrace(2); use software single-stepping for now. */ - set_gdbarch_software_single_step (gdbarch, alpha_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, alpha_software_single_step); /* OpenBSD/alpha has SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); set_gdbarch_skip_solib_resolver (gdbarch, obsd_skip_solib_resolver); tdep->dynamic_sigtramp_offset = alphaobsd_sigtramp_offset; @@ -125,9 +124,7 @@ alphaobsd_init_abi(struct gdbarch_info info, struct gdbarch *gdbarch) } -void _initialize_alphaobsd_tdep (); -void -_initialize_alphaobsd_tdep () +INIT_GDB_FILE (alphaobsd_tdep) { gdbarch_register_osabi (bfd_arch_alpha, 0, GDB_OSABI_OPENBSD, alphaobsd_init_abi); diff --git a/gdb/alpha-tdep.c b/gdb/alpha-tdep.c index f0272b0..59e0162 100644 --- a/gdb/alpha-tdep.c +++ b/gdb/alpha-tdep.c @@ -43,6 +43,9 @@ #include "alpha-tdep.h" #include <algorithm> +#include "target-descriptions.h" +#include "features/alpha.c" + /* Instruction decoding. The notations for registers, immediates and opcodes are the same as the one used in Compaq's Alpha architecture handbook. */ @@ -75,60 +78,38 @@ static const int subq_opcode = 0x10; static const int subq_function = 0x29; -/* Return the name of the REGNO register. +/* Alpha registers using their software names. An empty name corresponds to a register number that used to be used for a virtual register. That virtual register has been removed, but the index is still reserved to maintain compatibility with existing remote alpha targets. */ -static const char * -alpha_register_name (struct gdbarch *gdbarch, int regno) +static const char * const alpha_register_names[] = { - static const char * const register_names[] = - { - "v0", "t0", "t1", "t2", "t3", "t4", "t5", "t6", - "t7", "s0", "s1", "s2", "s3", "s4", "s5", "fp", - "a0", "a1", "a2", "a3", "a4", "a5", "t8", "t9", - "t10", "t11", "ra", "t12", "at", "gp", "sp", "zero", - "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", - "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", - "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", - "f24", "f25", "f26", "f27", "f28", "f29", "f30", "fpcr", - "pc", "", "unique" - }; - - static_assert (ALPHA_NUM_REGS == ARRAY_SIZE (register_names)); - return register_names[regno]; -} + "v0", "t0", "t1", "t2", "t3", "t4", "t5", "t6", + "t7", "s0", "s1", "s2", "s3", "s4", "s5", "fp", + "a0", "a1", "a2", "a3", "a4", "a5", "t8", "t9", + "t10", "t11", "ra", "t12", "at", "gp", "sp", "zero", + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", + "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", + "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", + "f24", "f25", "f26", "f27", "f28", "f29", "f30", "fpcr", + "pc", "", "unique" +}; +static_assert (ALPHA_NUM_REGS == ARRAY_SIZE (alpha_register_names)); static int alpha_cannot_fetch_register (struct gdbarch *gdbarch, int regno) { - return (strlen (alpha_register_name (gdbarch, regno)) == 0); + return (strlen (alpha_register_names[regno]) == 0); } static int alpha_cannot_store_register (struct gdbarch *gdbarch, int regno) { return (regno == ALPHA_ZERO_REGNUM - || strlen (alpha_register_name (gdbarch, regno)) == 0); -} - -static struct type * -alpha_register_type (struct gdbarch *gdbarch, int regno) -{ - if (regno == ALPHA_SP_REGNUM || regno == ALPHA_GP_REGNUM) - return builtin_type (gdbarch)->builtin_data_ptr; - if (regno == ALPHA_PC_REGNUM) - return builtin_type (gdbarch)->builtin_func_ptr; - - /* Don't need to worry about little vs big endian until - some jerk tries to port to alpha-unicosmk. */ - if (regno >= ALPHA_FP0_REGNUM && regno < ALPHA_FP0_REGNUM + 31) - return builtin_type (gdbarch)->builtin_double; - - return builtin_type (gdbarch)->builtin_int64; + || strlen (alpha_register_names[regno]) == 0); } /* Is REGNUM a member of REGGROUP? */ @@ -1715,11 +1696,39 @@ alpha_software_single_step (struct regcache *regcache) static struct gdbarch * alpha_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) { + tdesc_arch_data_up tdesc_data; + const struct target_desc *tdesc = info.target_desc; + /* Find a candidate among extant architectures. */ arches = gdbarch_list_lookup_by_info (arches, &info); if (arches != NULL) return arches->gdbarch; + if (tdesc == nullptr) + tdesc = tdesc_alpha; + + /* Validate target description. */ + if (tdesc_has_registers (tdesc)) + { + const struct tdesc_feature *feature; + bool valid_p; + + feature = tdesc_find_feature (tdesc, "org.gnu.gdb.alpha.core"); + if (feature == nullptr) + return nullptr; + + tdesc_data = tdesc_data_alloc (); + valid_p = true; + for (int i = 0; i < ALPHA_NUM_REGS; ++i) + valid_p &= tdesc_numbered_register (feature, tdesc_data.get (), i, + alpha_register_names[i]); + + if (!valid_p) + return nullptr; + } + + gdb_assert (tdesc_data != nullptr); + gdbarch *gdbarch = gdbarch_alloc (&info, gdbarch_tdep_up (new alpha_gdbarch_tdep)); alpha_gdbarch_tdep *tdep = gdbarch_tdep<alpha_gdbarch_tdep> (gdbarch); @@ -1756,8 +1765,7 @@ alpha_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_pc_regnum (gdbarch, ALPHA_PC_REGNUM); set_gdbarch_fp0_regnum (gdbarch, ALPHA_FP0_REGNUM); - set_gdbarch_register_name (gdbarch, alpha_register_name); - set_gdbarch_register_type (gdbarch, alpha_register_type); + tdesc_use_registers (gdbarch, tdesc, std::move (tdesc_data)); set_gdbarch_cannot_fetch_register (gdbarch, alpha_cannot_fetch_register); set_gdbarch_cannot_store_register (gdbarch, alpha_cannot_store_register); @@ -1789,7 +1797,7 @@ alpha_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_cannot_step_breakpoint (gdbarch, 1); /* Handles single stepping of atomic sequences. */ - set_gdbarch_software_single_step (gdbarch, alpha_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, alpha_software_single_step); /* Hook in ABI-specific overrides, if they have been registered. */ gdbarch_init_osabi (info, gdbarch); @@ -1815,13 +1823,13 @@ alpha_dwarf2_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer); } -void _initialize_alpha_tdep (); -void -_initialize_alpha_tdep () +INIT_GDB_FILE (alpha_tdep) { gdbarch_register (bfd_arch_alpha, alpha_gdbarch_init, NULL); + initialize_tdesc_alpha (); + /* Let the user set the fence post for heuristic_proc_start. */ /* We really would like to have both "0" and "unlimited" work, but diff --git a/gdb/amd-dbgapi-target.c b/gdb/amd-dbgapi-target.c index 8e067b6..a0210f4 100644 --- a/gdb/amd-dbgapi-target.c +++ b/gdb/amd-dbgapi-target.c @@ -104,12 +104,26 @@ amd_dbgapi_lib_debug_module () static gdb::observers::token amd_dbgapi_target_inferior_created_observer_token; +/* See amd-dbgapi-target.h. */ + const gdb::observers::token & get_amd_dbgapi_target_inferior_created_observer_token () { return amd_dbgapi_target_inferior_created_observer_token; } +/* inferior_execd observer token. */ + +static gdb::observers::token amd_dbgapi_target_inferior_execd_observer_token; + +/* See amd-dbgapi-target.h. */ + +const gdb::observers::token & +get_amd_dbgapi_target_inferior_execd_observer_token () +{ + return amd_dbgapi_target_inferior_execd_observer_token; +} + /* A type holding coordinates, etc. info for a given wave. */ struct wave_coordinates @@ -234,7 +248,7 @@ struct amd_dbgapi_inferior_info }; static amd_dbgapi_event_id_t process_event_queue - (amd_dbgapi_process_id_t process_id, + (amd_dbgapi_inferior_info &info, amd_dbgapi_event_kind_t until_event_kind = AMD_DBGAPI_EVENT_KIND_NONE); static const target_info amd_dbgapi_target_info = { @@ -443,6 +457,32 @@ async_event_handler_mark () mark_async_event_handler (amd_dbgapi_async_event_handler); } +/* Set forward progress requirement to REQUIRE for inferior INFO. */ + +static void +require_forward_progress (amd_dbgapi_inferior_info &info, bool require) +{ + /* If we try to disable forward progress requirement but the target expects + resumed threads to be committed to the target, we could wait for events + that will never arrive. */ + if (!require) + gdb_assert (!info.inf->process_target ()->commit_resumed_state); + + gdb_assert (info.process_id != AMD_DBGAPI_PROCESS_NONE); + + /* Don't do unnecessary calls to amd-dbgapi to avoid polluting the logs. */ + if (info.forward_progress_required == require) + return; + + const auto progress + = require ? AMD_DBGAPI_PROGRESS_NORMAL : AMD_DBGAPI_PROGRESS_NO_FORWARD; + const auto status + = amd_dbgapi_process_set_progress (info.process_id, progress); + gdb_assert (status == AMD_DBGAPI_STATUS_SUCCESS); + + info.forward_progress_required = require; +} + /* Set forward progress requirement to REQUIRE for all processes of PROC_TARGET matching PTID. */ @@ -457,21 +497,8 @@ require_forward_progress (ptid_t ptid, process_stratum_target *proc_target, amd_dbgapi_inferior_info *info = get_amd_dbgapi_inferior_info (inf); - if (info->process_id == AMD_DBGAPI_PROCESS_NONE) - continue; - - /* Don't do unnecessary calls to amd-dbgapi to avoid polluting the logs. */ - if (info->forward_progress_required == require) - continue; - - amd_dbgapi_status_t status - = amd_dbgapi_process_set_progress - (info->process_id, (require - ? AMD_DBGAPI_PROGRESS_NORMAL - : AMD_DBGAPI_PROGRESS_NO_FORWARD)); - gdb_assert (status == AMD_DBGAPI_STATUS_SUCCESS); - - info->forward_progress_required = require; + if (info->process_id != AMD_DBGAPI_PROCESS_NONE) + require_forward_progress (*info, require); /* If ptid targets a single inferior and we have found it, no need to continue. */ @@ -555,11 +582,12 @@ amd_dbgapi_target_breakpoint::check_status (struct bpstat *bs) if (action == AMD_DBGAPI_BREAKPOINT_ACTION_RESUME) return; + require_forward_progress (*info, false); + /* If the action is AMD_DBGAPI_BREAKPOINT_ACTION_HALT, we need to wait until a breakpoint resume event for this breakpoint_id is seen. */ amd_dbgapi_event_id_t resume_event_id - = process_event_queue (info->process_id, - AMD_DBGAPI_EVENT_KIND_BREAKPOINT_RESUME); + = process_event_queue (*info, AMD_DBGAPI_EVENT_KIND_BREAKPOINT_RESUME); /* We should always get a breakpoint_resume event after processing all events generated by reporting the breakpoint hit. */ @@ -1138,32 +1166,14 @@ add_gpu_thread (inferior *inf, ptid_t wave_ptid) /* Process an event that was just pulled out of the amd-dbgapi library. */ static void -process_one_event (amd_dbgapi_event_id_t event_id, +process_one_event (amd_dbgapi_inferior_info &info, + amd_dbgapi_event_id_t event_id, amd_dbgapi_event_kind_t event_kind) { /* Automatically mark this event processed when going out of scope. */ scoped_amd_dbgapi_event_processed mark_event_processed (event_id); - amd_dbgapi_process_id_t process_id; - amd_dbgapi_status_t status - = amd_dbgapi_event_get_info (event_id, AMD_DBGAPI_EVENT_INFO_PROCESS, - sizeof (process_id), &process_id); - if (status != AMD_DBGAPI_STATUS_SUCCESS) - error (_("event_get_info for event_%ld failed (%s)"), event_id.handle, - get_status_string (status)); - - amd_dbgapi_os_process_id_t pid; - status = amd_dbgapi_process_get_info (process_id, - AMD_DBGAPI_PROCESS_INFO_OS_ID, - sizeof (pid), &pid); - if (status != AMD_DBGAPI_STATUS_SUCCESS) - error (_("process_get_info for process_%ld failed (%s)"), - process_id.handle, get_status_string (status)); - - auto *proc_target = current_inferior ()->process_target (); - inferior *inf = find_inferior_pid (proc_target, pid); - gdb_assert (inf != nullptr); - amd_dbgapi_inferior_info *info = get_amd_dbgapi_inferior_info (inf); + gdb_assert (info.inf != nullptr); switch (event_kind) { @@ -1171,14 +1181,14 @@ process_one_event (amd_dbgapi_event_id_t event_id, case AMD_DBGAPI_EVENT_KIND_WAVE_STOP: { amd_dbgapi_wave_id_t wave_id; - status + amd_dbgapi_status_t status = amd_dbgapi_event_get_info (event_id, AMD_DBGAPI_EVENT_INFO_WAVE, sizeof (wave_id), &wave_id); if (status != AMD_DBGAPI_STATUS_SUCCESS) error (_("event_get_info for event_%ld failed (%s)"), event_id.handle, get_status_string (status)); - ptid_t event_ptid = make_gpu_ptid (pid, wave_id); + ptid_t event_ptid = make_gpu_ptid (info.inf->pid, wave_id); target_waitstatus ws; amd_dbgapi_wave_stop_reasons_t stop_reason; @@ -1219,9 +1229,10 @@ process_one_event (amd_dbgapi_event_id_t event_id, else ws.set_stopped (GDB_SIGNAL_0); - thread_info *thread = proc_target->find_thread (event_ptid); + thread_info *thread + = info.inf->process_target ()->find_thread (event_ptid); if (thread == nullptr) - thread = add_gpu_thread (inf, event_ptid); + thread = add_gpu_thread (info.inf, event_ptid); /* If the wave is stopped because of a software breakpoint, the program counter needs to be adjusted so that it points to the @@ -1243,7 +1254,7 @@ process_one_event (amd_dbgapi_event_id_t event_id, error (_("wave_get_info for wave_%ld failed (%s)"), wave_id.handle, get_status_string (status)); - info->wave_events.emplace_back (event_ptid, ws); + info.wave_events.emplace_back (event_ptid, ws); break; } @@ -1261,7 +1272,7 @@ process_one_event (amd_dbgapi_event_id_t event_id, When amd_dbgapi_target_breakpoint::check_status is called, the current inferior is the inferior that hit the breakpoint, which should still be the case now. */ - gdb_assert (inf == current_inferior ()); + gdb_assert (info.inf == current_inferior ()); handle_solib_event (); break; @@ -1275,22 +1286,22 @@ process_one_event (amd_dbgapi_event_id_t event_id, { amd_dbgapi_runtime_state_t runtime_state; - status = amd_dbgapi_event_get_info (event_id, - AMD_DBGAPI_EVENT_INFO_RUNTIME_STATE, - sizeof (runtime_state), - &runtime_state); + amd_dbgapi_status_t status + = amd_dbgapi_event_get_info (event_id, + AMD_DBGAPI_EVENT_INFO_RUNTIME_STATE, + sizeof (runtime_state), &runtime_state); if (status != AMD_DBGAPI_STATUS_SUCCESS) error (_("event_get_info for event_%ld failed (%s)"), event_id.handle, get_status_string (status)); gdb_assert (runtime_state == AMD_DBGAPI_RUNTIME_STATE_UNLOADED); gdb_assert - (info->runtime_state == AMD_DBGAPI_RUNTIME_STATE_LOADED_SUCCESS); + (info.runtime_state == AMD_DBGAPI_RUNTIME_STATE_LOADED_SUCCESS); - info->runtime_state = runtime_state; + info.runtime_state = runtime_state; - gdb_assert (inf->target_is_pushed (&the_amd_dbgapi_target)); - inf->unpush_target (&the_amd_dbgapi_target); + gdb_assert (info.inf->target_is_pushed (&the_amd_dbgapi_target)); + info.inf->unpush_target (&the_amd_dbgapi_target); } break; @@ -1331,20 +1342,18 @@ event_kind_str (amd_dbgapi_event_kind_t kind) gdb_assert_not_reached ("unhandled amd_dbgapi_event_kind_t value"); } -/* Drain the dbgapi event queue of a given process_id, or of all processes if - process_id is AMD_DBGAPI_PROCESS_NONE. Stop processing the events if an - event of a given kind is requested and `process_id` is not - AMD_DBGAPI_PROCESS_NONE. Wave stop events that are not returned are queued - into their inferior's amd_dbgapi_inferior_info pending wave events. */ +/* Drain the dbgapi event queue of a given inferior. Stop processing the + events if an event of a given kind is requested (not AMD_DBGAPI_EVENT_NONE). + Wave stop events that are not returned are queued into their inferior's + amd_dbgapi_inferior_info pending wave events. */ static amd_dbgapi_event_id_t -process_event_queue (amd_dbgapi_process_id_t process_id, +process_event_queue (amd_dbgapi_inferior_info &info, amd_dbgapi_event_kind_t until_event_kind) { - /* An event of a given type can only be requested from a single - process_id. */ - gdb_assert (until_event_kind == AMD_DBGAPI_EVENT_KIND_NONE - || process_id != AMD_DBGAPI_PROCESS_NONE); + /* Pulling events with forward progress required may result in bad + performance, make sure it is not required. */ + gdb_assert (!info.forward_progress_required); while (true) { @@ -1352,7 +1361,7 @@ process_event_queue (amd_dbgapi_process_id_t process_id, amd_dbgapi_event_kind_t event_kind; amd_dbgapi_status_t status - = amd_dbgapi_process_next_pending_event (process_id, &event_id, + = amd_dbgapi_process_next_pending_event (info.process_id, &event_id, &event_kind); if (status != AMD_DBGAPI_STATUS_SUCCESS) @@ -1368,7 +1377,7 @@ process_event_queue (amd_dbgapi_process_id_t process_id, if (event_id == AMD_DBGAPI_EVENT_NONE || event_kind == until_event_kind) return event_id; - process_one_event (event_id, event_kind); + process_one_event (info, event_id, event_kind); } } @@ -1473,7 +1482,7 @@ amd_dbgapi_target::wait (ptid_t ptid, struct target_waitstatus *ws, /* Drain the events for the current inferior from the amd_dbgapi and preserve the ordering. */ auto info = get_amd_dbgapi_inferior_info (current_inferior ()); - process_event_queue (info->process_id, AMD_DBGAPI_EVENT_KIND_NONE); + process_event_queue (*info); std::tie (event_ptid, gpu_waitstatus) = consume_one_event (ptid.pid ()); if (event_ptid == minus_one_ptid) @@ -1860,13 +1869,14 @@ amd_dbgapi_target::update_thread_list () if (changed == AMD_DBGAPI_CHANGED_NO) continue; + gdb::unique_xmalloc_ptr<amd_dbgapi_wave_id_t> wave_list_holder + (wave_list); + /* Create a set and free the wave list. */ std::set<ptid_t::tid_type> threads; for (size_t i = 0; i < count; ++i) threads.emplace (wave_list[i].handle); - xfree (wave_list); - /* Prune the wave_ids that already have a thread_info. Any thread_info which does not have a corresponding wave_id represents a wave which is gone at this point and should be deleted. */ @@ -2479,10 +2489,7 @@ maybe_reset_amd_dbgapi () get_status_string (status)); } -extern initialize_file_ftype _initialize_amd_dbgapi_target; - -void -_initialize_amd_dbgapi_target () +INIT_GDB_FILE (amd_dbgapi_target) { /* Make sure the loaded debugger library version is greater than or equal to the one used to build GDB. */ @@ -2510,7 +2517,9 @@ _initialize_amd_dbgapi_target () gdb::observers::inferior_created.attach (amd_dbgapi_target_inferior_created, amd_dbgapi_target_inferior_created_observer_token, "amd-dbgapi"); - gdb::observers::inferior_execd.attach (amd_dbgapi_inferior_execd, "amd-dbgapi"); + gdb::observers::inferior_execd.attach + (amd_dbgapi_inferior_execd, amd_dbgapi_target_inferior_execd_observer_token, + "amd-dbgapi"); gdb::observers::inferior_forked.attach (amd_dbgapi_inferior_forked, "amd-dbgapi"); gdb::observers::inferior_exit.attach (amd_dbgapi_inferior_exited, "amd-dbgapi"); gdb::observers::inferior_pre_detach.attach (amd_dbgapi_inferior_pre_detach, "amd-dbgapi"); diff --git a/gdb/amd-dbgapi-target.h b/gdb/amd-dbgapi-target.h index dd37ba3..fe3a50b 100644 --- a/gdb/amd-dbgapi-target.h +++ b/gdb/amd-dbgapi-target.h @@ -54,6 +54,11 @@ using is_amd_dbgapi_handle const gdb::observers::token & get_amd_dbgapi_target_inferior_created_observer_token (); +/* Get the token of amd-dbgapi's inferior_execd observer. */ + +const gdb::observers::token & + get_amd_dbgapi_target_inferior_execd_observer_token (); + /* Comparison operators for amd-dbgapi handle types. */ template <typename T, diff --git a/gdb/amd64-darwin-tdep.c b/gdb/amd64-darwin-tdep.c index dde023e..c687b1f 100644 --- a/gdb/amd64-darwin-tdep.c +++ b/gdb/amd64-darwin-tdep.c @@ -113,12 +113,10 @@ x86_darwin_init_abi_64 (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->jb_pc_offset = 56; - set_gdbarch_so_ops (gdbarch, &darwin_so_ops); + set_gdbarch_make_solib_ops (gdbarch, make_darwin_solib_ops); } -void _initialize_amd64_darwin_tdep (); -void -_initialize_amd64_darwin_tdep () +INIT_GDB_FILE (amd64_darwin_tdep) { gdbarch_register_osabi (bfd_arch_i386, bfd_mach_x86_64, GDB_OSABI_DARWIN, x86_darwin_init_abi_64); diff --git a/gdb/amd64-dicos-tdep.c b/gdb/amd64-dicos-tdep.c index 3e9b8c7..d7c211b 100644 --- a/gdb/amd64-dicos-tdep.c +++ b/gdb/amd64-dicos-tdep.c @@ -45,9 +45,7 @@ amd64_dicos_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_amd64_dicos_tdep (); -void -_initialize_amd64_dicos_tdep () +INIT_GDB_FILE (amd64_dicos_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_elf_flavour, amd64_dicos_osabi_sniffer); diff --git a/gdb/amd64-fbsd-nat.c b/gdb/amd64-fbsd-nat.c index a783a5d1..89bb049 100644 --- a/gdb/amd64-fbsd-nat.c +++ b/gdb/amd64-fbsd-nat.c @@ -324,9 +324,7 @@ amd64_fbsd_nat_target::read_description () return i386_target_description (X86_XSTATE_SSE_MASK, true); } -void _initialize_amd64fbsd_nat (); -void -_initialize_amd64fbsd_nat () +INIT_GDB_FILE (amd64fbsd_nat) { add_inf_child_target (&the_amd64_fbsd_nat_target); diff --git a/gdb/amd64-fbsd-tdep.c b/gdb/amd64-fbsd-tdep.c index eea0105..12f1e22 100644 --- a/gdb/amd64-fbsd-tdep.c +++ b/gdb/amd64-fbsd-tdep.c @@ -328,8 +328,7 @@ amd64fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) amd64fbsd_core_read_description); /* FreeBSD uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); set_gdbarch_fetch_tls_load_module_address (gdbarch, svr4_fetch_objfile_link_map); @@ -337,9 +336,7 @@ amd64fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) amd64fbsd_get_thread_local_address); } -void _initialize_amd64fbsd_tdep (); -void -_initialize_amd64fbsd_tdep () +INIT_GDB_FILE (amd64fbsd_tdep) { gdbarch_register_osabi (bfd_arch_i386, bfd_mach_x86_64, GDB_OSABI_FREEBSD, amd64fbsd_init_abi); diff --git a/gdb/amd64-gnu-tdep.c b/gdb/amd64-gnu-tdep.c index 602fa8e..2b7337b 100644 --- a/gdb/amd64-gnu-tdep.c +++ b/gdb/amd64-gnu-tdep.c @@ -218,13 +218,10 @@ amd64_gnu_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->sc_num_regs = ARRAY_SIZE (amd64_gnu_sc_reg_offset); /* Hurd uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); } -void _initialize_amd64_gnu_tdep (); -void -_initialize_amd64_gnu_tdep () +INIT_GDB_FILE (amd64_gnu_tdep) { gdbarch_register_osabi (bfd_arch_i386, bfd_mach_x86_64, GDB_OSABI_HURD, amd64_gnu_init_abi); diff --git a/gdb/amd64-linux-nat.c b/gdb/amd64-linux-nat.c index 75e63c6..dbb9b32 100644 --- a/gdb/amd64-linux-nat.c +++ b/gdb/amd64-linux-nat.c @@ -424,9 +424,7 @@ amd64_linux_nat_target::low_siginfo_fixup (siginfo_t *ptrace, return false; } -void _initialize_amd64_linux_nat (); -void -_initialize_amd64_linux_nat () +INIT_GDB_FILE (amd64_linux_nat) { amd64_native_gregset32_reg_offset = amd64_linux_gregset32_reg_offset; amd64_native_gregset32_num_regs = I386_LINUX_NUM_REGS; diff --git a/gdb/amd64-linux-tdep.c b/gdb/amd64-linux-tdep.c index e5a2ab9..ce62a42 100644 --- a/gdb/amd64-linux-tdep.c +++ b/gdb/amd64-linux-tdep.c @@ -33,6 +33,7 @@ #include "amd64-linux-tdep.h" #include "i386-linux-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "svr4-tls-tdep.h" #include "gdbsupport/x86-xstate.h" #include "inferior.h" @@ -1868,8 +1869,8 @@ amd64_linux_get_tls_dtv_addr (struct gdbarch *gdbarch, ptid_t ptid, } static void -amd64_linux_init_abi_common(struct gdbarch_info info, struct gdbarch *gdbarch, - int num_disp_step_buffers) +amd64_linux_init_abi_common (struct gdbarch_info info, struct gdbarch *gdbarch, + int num_disp_step_buffers) { i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (gdbarch); @@ -2130,8 +2131,7 @@ amd64_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->i386_syscall_record = amd64_linux_syscall_record; /* GNU/Linux uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_lp64_svr4_solib_ops); /* Register DTrace handlers. */ set_gdbarch_dtrace_parse_probe_argument (gdbarch, amd64_dtrace_parse_probe_argument); @@ -2344,13 +2344,10 @@ amd64_x32_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->i386_syscall_record = amd64_x32_linux_syscall_record; /* GNU/Linux uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); } -void _initialize_amd64_linux_tdep (); -void -_initialize_amd64_linux_tdep () +INIT_GDB_FILE (amd64_linux_tdep) { gdbarch_register_osabi (bfd_arch_i386, bfd_mach_x86_64, GDB_OSABI_LINUX, amd64_linux_init_abi); diff --git a/gdb/amd64-netbsd-nat.c b/gdb/amd64-netbsd-nat.c index 92ad4b2..c960b3c 100644 --- a/gdb/amd64-netbsd-nat.c +++ b/gdb/amd64-netbsd-nat.c @@ -55,9 +55,7 @@ static int amd64nbsd32_r_reg_offset[] = static amd64_bsd_nat_target<nbsd_nat_target> the_amd64_nbsd_nat_target; -void _initialize_amd64nbsd_nat (); -void -_initialize_amd64nbsd_nat () +INIT_GDB_FILE (amd64nbsd_nat) { amd64_native_gregset32_reg_offset = amd64nbsd32_r_reg_offset; amd64_native_gregset32_num_regs = ARRAY_SIZE (amd64nbsd32_r_reg_offset); diff --git a/gdb/amd64-netbsd-tdep.c b/gdb/amd64-netbsd-tdep.c index f4464b7..3dbbdd9 100644 --- a/gdb/amd64-netbsd-tdep.c +++ b/gdb/amd64-netbsd-tdep.c @@ -116,13 +116,10 @@ amd64nbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->sc_num_regs = ARRAY_SIZE (amd64nbsd_r_reg_offset); /* NetBSD uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); } -void _initialize_amd64nbsd_tdep (); -void -_initialize_amd64nbsd_tdep () +INIT_GDB_FILE (amd64nbsd_tdep) { /* The NetBSD/amd64 native dependent code makes this assumption. */ gdb_assert (ARRAY_SIZE (amd64nbsd_r_reg_offset) == AMD64_NUM_GREGS); diff --git a/gdb/amd64-obsd-nat.c b/gdb/amd64-obsd-nat.c index 93d38df..8471520 100644 --- a/gdb/amd64-obsd-nat.c +++ b/gdb/amd64-obsd-nat.c @@ -127,9 +127,7 @@ amd64obsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) static amd64_bsd_nat_target<obsd_nat_target> the_amd64_obsd_nat_target; -void _initialize_amd64obsd_nat (); -void -_initialize_amd64obsd_nat () +INIT_GDB_FILE (amd64obsd_nat) { amd64_native_gregset32_reg_offset = amd64obsd32_r_reg_offset; amd64_native_gregset32_num_regs = ARRAY_SIZE (amd64obsd32_r_reg_offset); diff --git a/gdb/amd64-obsd-tdep.c b/gdb/amd64-obsd-tdep.c index 5acc380..6b60e0a 100644 --- a/gdb/amd64-obsd-tdep.c +++ b/gdb/amd64-obsd-tdep.c @@ -443,16 +443,13 @@ amd64obsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) bsd_uthread_set_collect_uthread (gdbarch, amd64obsd_collect_uthread); /* OpenBSD uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); /* Unwind kernel trap frames correctly. */ frame_unwind_prepend_unwinder (gdbarch, &amd64obsd_trapframe_unwind); } -void _initialize_amd64obsd_tdep (); -void -_initialize_amd64obsd_tdep () +INIT_GDB_FILE (amd64obsd_tdep) { /* The OpenBSD/amd64 native dependent code makes this assumption. */ gdb_assert (ARRAY_SIZE (amd64obsd_r_reg_offset) == AMD64_NUM_GREGS); diff --git a/gdb/amd64-sol2-tdep.c b/gdb/amd64-sol2-tdep.c index 84d5f87..da551a1 100644 --- a/gdb/amd64-sol2-tdep.c +++ b/gdb/amd64-sol2-tdep.c @@ -96,13 +96,10 @@ amd64_sol2_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->sc_num_regs = tdep->gregset_num_regs; /* Solaris uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); } -void _initialize_amd64_sol2_tdep (); -void -_initialize_amd64_sol2_tdep () +INIT_GDB_FILE (amd64_sol2_tdep) { gdbarch_register_osabi (bfd_arch_i386, bfd_mach_x86_64, GDB_OSABI_SOLARIS, amd64_sol2_init_abi); diff --git a/gdb/amd64-tdep.c b/gdb/amd64-tdep.c index e495778..d5ea4af 100644 --- a/gdb/amd64-tdep.c +++ b/gdb/amd64-tdep.c @@ -513,20 +513,19 @@ amd64_has_unaligned_fields (struct type *type) if (type->code () == TYPE_CODE_STRUCT || type->code () == TYPE_CODE_UNION) { - for (int i = 0; i < type->num_fields (); i++) + for (const auto &field : type->fields ()) { - struct type *subtype = check_typedef (type->field (i).type ()); + struct type *subtype = check_typedef (field.type ()); /* Ignore static fields, empty fields (for example nested empty structures), and bitfields (these are handled by the caller). */ - if (type->field (i).is_static () - || (type->field (i).bitsize () == 0 - && subtype->length () == 0) - || type->field (i).is_packed ()) + if (field.is_static () + || (field.bitsize () == 0 && subtype->length () == 0) + || field.is_packed ()) continue; - int bitpos = type->field (i).loc_bitpos (); + int bitpos = field.loc_bitpos (); if (bitpos % 8 != 0) return true; @@ -2129,6 +2128,30 @@ amd64_alloc_frame_cache (void) return cache; } +/* Check whether PC is at "endbr64" instruction. If so, return PC past it. + Otherwise, return PC passed to this function. */ + +static CORE_ADDR +amd64_skip_endbr (gdbarch *gdbarch, CORE_ADDR pc) +{ + static const gdb_byte endbr64[4] = { 0xf3, 0x0f, 0x1e, 0xfa }; + + bfd_endian byte_order = gdbarch_byte_order (gdbarch); + gdb_byte buf[3]; + gdb_byte op = read_code_unsigned_integer (pc, 1, byte_order); + + /* Check for the `endbr64` instruction, skip it if found. */ + if (op == endbr64[0]) + { + read_code (pc + 1, buf, 3); + + if (memcmp (buf, &endbr64[1], 3) == 0) + return pc + 4; + } + + return pc; +} + /* GCC 4.4 and later, can put code in the prologue to realign the stack pointer. Check whether PC points to such code, and update CACHE accordingly. Return the first instruction after the code @@ -2466,35 +2489,18 @@ amd64_x32_analyze_stack_align (CORE_ADDR pc, CORE_ADDR current_pc, return std::min (pc + offset + 2, current_pc); } -/* Do a limited analysis of the prologue at PC and update CACHE - accordingly. Bail out early if CURRENT_PC is reached. Return the - address where the analysis stopped. - - We will handle only functions beginning with: - - pushq %rbp 0x55 - movq %rsp, %rbp 0x48 0x89 0xe5 (or 0x48 0x8b 0xec) - - or (for the X32 ABI): - - pushq %rbp 0x55 - movl %esp, %ebp 0x89 0xe5 (or 0x8b 0xec) - - The `endbr64` instruction can be found before these sequences, and will be - skipped if found. +/* Analyze frame setup instructions at PC on behalf of amd64_analyze_prologue + and update CACHE accordingly. Bail out early if CURRENT_PC is reached. + Return the address where the analysis stopped. - Any function that doesn't start with one of these sequences will be - assumed to have no prologue and thus no valid frame pointer in - %rbp. */ + See comment on amd64_analyze_prologue for the sequences handled. The + movq/movl after the push of %rbp is considered optional. 'endbr64' is + handled before this function. */ static CORE_ADDR -amd64_analyze_prologue (struct gdbarch *gdbarch, - CORE_ADDR pc, CORE_ADDR current_pc, - struct amd64_frame_cache *cache) +amd64_analyze_frame_setup (gdbarch *gdbarch, CORE_ADDR pc, + CORE_ADDR current_pc, amd64_frame_cache *cache) { - enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); - /* The `endbr64` instruction. */ - static const gdb_byte endbr64[4] = { 0xf3, 0x0f, 0x1e, 0xfa }; /* There are two variations of movq %rsp, %rbp. */ static const gdb_byte mov_rsp_rbp_1[3] = { 0x48, 0x89, 0xe5 }; static const gdb_byte mov_rsp_rbp_2[3] = { 0x48, 0x8b, 0xec }; @@ -2502,34 +2508,11 @@ amd64_analyze_prologue (struct gdbarch *gdbarch, static const gdb_byte mov_esp_ebp_1[2] = { 0x89, 0xe5 }; static const gdb_byte mov_esp_ebp_2[2] = { 0x8b, 0xec }; + bfd_endian byte_order = gdbarch_byte_order (gdbarch); gdb_byte buf[3]; - gdb_byte op; - - if (current_pc <= pc) - return current_pc; - - if (gdbarch_ptr_bit (gdbarch) == 32) - pc = amd64_x32_analyze_stack_align (pc, current_pc, cache); - else - pc = amd64_analyze_stack_align (pc, current_pc, cache); - - op = read_code_unsigned_integer (pc, 1, byte_order); - - /* Check for the `endbr64` instruction, skip it if found. */ - if (op == endbr64[0]) - { - read_code (pc + 1, buf, 3); - - if (memcmp (buf, &endbr64[1], 3) == 0) - pc += 4; - - op = read_code_unsigned_integer (pc, 1, byte_order); - } - - if (current_pc <= pc) - return current_pc; + gdb_byte op = read_code_unsigned_integer (pc, 1, byte_order); - if (op == 0x55) /* pushq %rbp */ + if (op == 0x55) /* pushq %rbp. */ { /* Take into account that we've executed the `pushq %rbp' that starts this instruction sequence. */ @@ -2569,6 +2552,50 @@ amd64_analyze_prologue (struct gdbarch *gdbarch, return pc; } +/* Do a limited analysis of the prologue at PC and update CACHE + accordingly. Bail out early if CURRENT_PC is reached. Return the + address where the analysis stopped. + + We will handle only functions beginning with: + + pushq %rbp 0x55 + movq %rsp, %rbp 0x48 0x89 0xe5 (or 0x48 0x8b 0xec) + + or (for the X32 ABI): + + pushq %rbp 0x55 + movl %esp, %ebp 0x89 0xe5 (or 0x8b 0xec) + + The `endbr64` instruction can be found before these sequences, and will be + skipped if found. + + Any function that doesn't start with one of these sequences will be + assumed to have no prologue and thus no valid frame pointer in + %rbp. */ + +static CORE_ADDR +amd64_analyze_prologue (gdbarch *gdbarch, CORE_ADDR pc, CORE_ADDR current_pc, + amd64_frame_cache *cache) +{ + if (current_pc <= pc) + return current_pc; + + /* If generated, 'endbr64' will be placed before stack alignment too. */ + pc = amd64_skip_endbr (gdbarch, pc); + if (current_pc <= pc) + return current_pc; + + if (gdbarch_ptr_bit (gdbarch) == 32) + pc = amd64_x32_analyze_stack_align (pc, current_pc, cache); + else + pc = amd64_analyze_stack_align (pc, current_pc, cache); + + if (current_pc <= pc) + return current_pc; + + return amd64_analyze_frame_setup (gdbarch, pc, current_pc, cache); +} + /* Work around false termination of prologue - GCC PR debug/48827. START_PC is the first instruction of a function, PC is its minimal already @@ -3740,9 +3767,7 @@ amd64_insn_decode (void) } // namespace selftests #endif /* GDB_SELF_TEST */ -void _initialize_amd64_tdep (); -void -_initialize_amd64_tdep () +INIT_GDB_FILE (amd64_tdep) { gdbarch_register_osabi (bfd_arch_i386, bfd_mach_x86_64, GDB_OSABI_NONE, amd64_none_init_abi); diff --git a/gdb/amd64-windows-nat.c b/gdb/amd64-windows-nat.c index 223e078..f5c98f6 100644 --- a/gdb/amd64-windows-nat.c +++ b/gdb/amd64-windows-nat.c @@ -94,9 +94,7 @@ amd64_windows_segment_register_p (int regnum) return regnum >= AMD64_CS_REGNUM && regnum <= AMD64_GS_REGNUM; } -void _initialize_amd64_windows_nat (); -void -_initialize_amd64_windows_nat () +INIT_GDB_FILE (amd64_windows_nat) { x86_set_debug_register_length (8); } diff --git a/gdb/amd64-windows-tdep.c b/gdb/amd64-windows-tdep.c index c4719dc..c7977d2 100644 --- a/gdb/amd64-windows-tdep.c +++ b/gdb/amd64-windows-tdep.c @@ -1404,9 +1404,7 @@ amd64_cygwin_core_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_amd64_windows_tdep (); -void -_initialize_amd64_windows_tdep () +INIT_GDB_FILE (amd64_windows_tdep) { gdbarch_register_osabi (bfd_arch_i386, bfd_mach_x86_64, GDB_OSABI_WINDOWS, amd64_windows_init_abi); diff --git a/gdb/amdgpu-tdep.c b/gdb/amdgpu-tdep.c index dc1b32f..26e5a27 100644 --- a/gdb/amdgpu-tdep.c +++ b/gdb/amdgpu-tdep.c @@ -1371,10 +1371,7 @@ amdgpu_register_type_parse_test () #endif -void _initialize_amdgpu_tdep (); - -void -_initialize_amdgpu_tdep () +INIT_GDB_FILE (amdgpu_tdep) { gdbarch_register (bfd_arch_amdgcn, amdgpu_gdbarch_init, NULL, amdgpu_supports_arch_info); diff --git a/gdb/annotate.c b/gdb/annotate.c index ea0bfa9..55db2e2 100644 --- a/gdb/annotate.c +++ b/gdb/annotate.c @@ -627,9 +627,7 @@ breakpoint_changed (struct breakpoint *b) annotate_breakpoints_invalid (); } -void _initialize_annotate (); -void -_initialize_annotate () +INIT_GDB_FILE (annotate) { gdb::observers::breakpoint_created.attach (breakpoint_changed, "annotate"); gdb::observers::breakpoint_deleted.attach (breakpoint_changed, "annotate"); diff --git a/gdb/arc-linux-nat.c b/gdb/arc-linux-nat.c index 091a966..75fc4b7 100644 --- a/gdb/arc-linux-nat.c +++ b/gdb/arc-linux-nat.c @@ -309,9 +309,7 @@ ps_get_thread_area (struct ps_prochandle *ph, lwpid_t lwpid, int idx, } /* Suppress warning from -Wmissing-prototypes. */ -void _initialize_arc_linux_nat (); -void -_initialize_arc_linux_nat () +INIT_GDB_FILE (arc_linux_nat) { /* Register the target. */ linux_target = &the_arc_linux_nat_target; diff --git a/gdb/arc-linux-tdep.c b/gdb/arc-linux-tdep.c index adf6691..6a4f4b1 100644 --- a/gdb/arc-linux-tdep.c +++ b/gdb/arc-linux-tdep.c @@ -19,6 +19,7 @@ /* GDB header files. */ #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "objfiles.h" #include "opcode/arc.h" #include "osabi.h" @@ -727,7 +728,7 @@ arc_linux_init_osabi (struct gdbarch_info info, struct gdbarch *gdbarch) arc_linux_sw_breakpoint_from_kind); set_gdbarch_fetch_tls_load_module_address (gdbarch, svr4_fetch_objfile_link_map); - set_gdbarch_software_single_step (gdbarch, arc_linux_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, arc_linux_software_single_step); set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); set_gdbarch_skip_solib_resolver (gdbarch, arc_linux_skip_solib_resolver); set_gdbarch_iterate_over_regset_sections @@ -736,15 +737,10 @@ arc_linux_init_osabi (struct gdbarch_info info, struct gdbarch *gdbarch) /* GNU/Linux uses SVR4-style shared libraries, with 32-bit ints, longs and pointers (ILP32). */ - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); } -/* Suppress warning from -Wmissing-prototypes. */ -extern initialize_file_ftype _initialize_arc_linux_tdep; - -void -_initialize_arc_linux_tdep () +INIT_GDB_FILE (arc_linux_tdep) { gdbarch_register_osabi (bfd_arch_arc, 0, GDB_OSABI_LINUX, arc_linux_init_osabi); diff --git a/gdb/arc-newlib-tdep.c b/gdb/arc-newlib-tdep.c index fd80bfa..9a6f7a8 100644 --- a/gdb/arc-newlib-tdep.c +++ b/gdb/arc-newlib-tdep.c @@ -58,9 +58,7 @@ arc_newlib_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_arc_newlib_tdep (); -void -_initialize_arc_newlib_tdep () +INIT_GDB_FILE (arc_newlib_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_arc, bfd_target_elf_flavour, arc_newlib_osabi_sniffer); diff --git a/gdb/arc-tdep.c b/gdb/arc-tdep.c index 8db6e7b..f5ae11c 100644 --- a/gdb/arc-tdep.c +++ b/gdb/arc-tdep.c @@ -2458,9 +2458,7 @@ dump_arc_instruction_command (const char *args, int from_tty) arc_insn_dump (insn); } -void _initialize_arc_tdep (); -void -_initialize_arc_tdep () +INIT_GDB_FILE (arc_tdep) { gdbarch_register (bfd_arch_arc, arc_gdbarch_init, arc_dump_tdep); diff --git a/gdb/arch-utils.c b/gdb/arch-utils.c index be0494f..96fb2c4 100644 --- a/gdb/arch-utils.c +++ b/gdb/arch-utils.c @@ -48,7 +48,7 @@ bool default_displaced_step_hw_singlestep (struct gdbarch *gdbarch) { - return !gdbarch_software_single_step_p (gdbarch); + return !gdbarch_get_next_pcs_p (gdbarch); } CORE_ADDR @@ -1525,9 +1525,7 @@ core_file_exec_context::environment () const return e; } -void _initialize_gdbarch_utils (); -void -_initialize_gdbarch_utils () +INIT_GDB_FILE (gdbarch_utils) { add_setshow_enum_cmd ("endian", class_support, endian_enum, &set_endian_string, diff --git a/gdb/arch/arc.c b/gdb/arch/arc.c index efe7111..b7de1da 100644 --- a/gdb/arch/arc.c +++ b/gdb/arch/arc.c @@ -17,7 +17,6 @@ #include "arc.h" -#include <stdlib.h> #include <unordered_map> #include <string> diff --git a/gdb/arch/loongarch.c b/gdb/arch/loongarch.c index 07c6d4d..25e698d 100644 --- a/gdb/arch/loongarch.c +++ b/gdb/arch/loongarch.c @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "loongarch.h" -#include <stdlib.h> #include <unordered_map> /* Target description features. */ diff --git a/gdb/arch/riscv.c b/gdb/arch/riscv.c index a6188ea..c698fa2 100644 --- a/gdb/arch/riscv.c +++ b/gdb/arch/riscv.c @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "riscv.h" -#include <stdlib.h> #include <unordered_map> #include "../features/riscv/32bit-cpu.c" diff --git a/gdb/arm-fbsd-nat.c b/gdb/arm-fbsd-nat.c index 2b7b75a..e068023 100644 --- a/gdb/arm-fbsd-nat.c +++ b/gdb/arm-fbsd-nat.c @@ -104,9 +104,7 @@ arm_fbsd_nat_target::read_description () return desc; } -void _initialize_arm_fbsd_nat (); -void -_initialize_arm_fbsd_nat () +INIT_GDB_FILE (arm_fbsd_nat) { add_inf_child_target (&the_arm_fbsd_nat_target); } diff --git a/gdb/arm-fbsd-tdep.c b/gdb/arm-fbsd-tdep.c index c9a466f..fc81818 100644 --- a/gdb/arm-fbsd-tdep.c +++ b/gdb/arm-fbsd-tdep.c @@ -300,8 +300,7 @@ arm_fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tramp_frame_prepend_unwinder (gdbarch, &arm_fbsd_sigframe); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); tdep->jb_pc = 24; tdep->jb_elt_size = 4; @@ -319,12 +318,10 @@ arm_fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) } /* Single stepping. */ - set_gdbarch_software_single_step (gdbarch, arm_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, arm_software_single_step); } -void _initialize_arm_fbsd_tdep (); -void -_initialize_arm_fbsd_tdep () +INIT_GDB_FILE (arm_fbsd_tdep) { gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_FREEBSD, arm_fbsd_init_abi); diff --git a/gdb/arm-linux-nat.c b/gdb/arm-linux-nat.c index 3ff9fc6..dc5165e 100644 --- a/gdb/arm-linux-nat.c +++ b/gdb/arm-linux-nat.c @@ -90,8 +90,6 @@ public: bool stopped_data_address (CORE_ADDR *) override; - bool watchpoint_addr_within_range (CORE_ADDR, CORE_ADDR, int) override; - const struct target_desc *read_description () override; /* Override linux_nat_target low methods. */ @@ -1206,14 +1204,6 @@ arm_linux_nat_target::stopped_by_watchpoint () return stopped_data_address (&addr); } -bool -arm_linux_nat_target::watchpoint_addr_within_range (CORE_ADDR addr, - CORE_ADDR start, - int length) -{ - return start <= addr && start + length - 1 >= addr; -} - /* Handle thread creation. We need to copy the breakpoints and watchpoints in the parent thread to the child thread. */ void @@ -1393,9 +1383,7 @@ arm_linux_nat_target::low_new_fork (struct lwp_info *parent, pid_t child_pid) *child_state = *parent_state; } -void _initialize_arm_linux_nat (); -void -_initialize_arm_linux_nat () +INIT_GDB_FILE (arm_linux_nat) { /* Register the target. */ linux_target = &the_arm_linux_nat_target; diff --git a/gdb/arm-linux-tdep.c b/gdb/arm-linux-tdep.c index 485a5d9..cc10679 100644 --- a/gdb/arm-linux-tdep.c +++ b/gdb/arm-linux-tdep.c @@ -41,6 +41,7 @@ #include "arm-tdep.h" #include "arm-linux-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "glibc-tdep.h" #include "arch-utils.h" #include "inferior.h" @@ -1801,11 +1802,10 @@ arm_linux_init_abi (struct gdbarch_info info, } tdep->jb_elt_size = ARM_LINUX_JB_ELEMENT_SIZE; - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); /* Single stepping. */ - set_gdbarch_software_single_step (gdbarch, arm_linux_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, arm_linux_software_single_step); /* Shared library handling. */ set_gdbarch_skip_trampoline_code (gdbarch, arm_linux_skip_trampoline_code); @@ -2026,9 +2026,7 @@ arm_linux_init_abi (struct gdbarch_info info, set_gdbarch_gcc_target_options (gdbarch, arm_linux_gcc_target_options); } -void _initialize_arm_linux_tdep (); -void -_initialize_arm_linux_tdep () +INIT_GDB_FILE (arm_linux_tdep) { gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_LINUX, arm_linux_init_abi); diff --git a/gdb/arm-netbsd-nat.c b/gdb/arm-netbsd-nat.c index 3a24f51..ebf4084 100644 --- a/gdb/arm-netbsd-nat.c +++ b/gdb/arm-netbsd-nat.c @@ -354,9 +354,7 @@ arm_netbsd_nat_target::read_description () return arm_read_description (ARM_FP_TYPE_VFPV3, false); } -void _initialize_arm_netbsd_nat (); -void -_initialize_arm_netbsd_nat () +INIT_GDB_FILE (arm_netbsd_nat) { add_inf_child_target (&the_arm_netbsd_nat_target); } diff --git a/gdb/arm-netbsd-tdep.c b/gdb/arm-netbsd-tdep.c index a162054..571d6f2 100644 --- a/gdb/arm-netbsd-tdep.c +++ b/gdb/arm-netbsd-tdep.c @@ -139,7 +139,7 @@ arm_netbsd_init_abi_common (struct gdbarch_info info, set_gdbarch_iterate_over_regset_sections (gdbarch, arm_nbsd_iterate_over_regset_sections); /* Single stepping. */ - set_gdbarch_software_single_step (gdbarch, arm_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, arm_software_single_step); } static void @@ -156,13 +156,10 @@ arm_netbsd_elf_init_abi (struct gdbarch_info info, tdep->fp_model = ARM_FLOAT_SOFT_VFP; /* NetBSD ELF uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); } -void _initialize_arm_netbsd_tdep (); -void -_initialize_arm_netbsd_tdep () +INIT_GDB_FILE (arm_netbsd_tdep) { gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_NETBSD, arm_netbsd_elf_init_abi); diff --git a/gdb/arm-none-tdep.c b/gdb/arm-none-tdep.c index 81db22f..3ffcd2b 100644 --- a/gdb/arm-none-tdep.c +++ b/gdb/arm-none-tdep.c @@ -204,9 +204,7 @@ arm_none_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Initialize ARM bare-metal target support. */ -void _initialize_arm_none_tdep (); -void -_initialize_arm_none_tdep () +INIT_GDB_FILE (arm_none_tdep) { gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_NONE, arm_none_init_abi); diff --git a/gdb/arm-obsd-tdep.c b/gdb/arm-obsd-tdep.c index 6fd4c85..8a48b95 100644 --- a/gdb/arm-obsd-tdep.c +++ b/gdb/arm-obsd-tdep.c @@ -83,8 +83,7 @@ armobsd_init_abi (struct gdbarch_info info, tramp_frame_prepend_unwinder (gdbarch, &armobsd_sigframe); /* OpenBSD/arm uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); set_gdbarch_skip_solib_resolver (gdbarch, obsd_skip_solib_resolver); tdep->jb_pc = 24; @@ -97,7 +96,7 @@ armobsd_init_abi (struct gdbarch_info info, tdep->struct_return = pcc_struct_return; /* Single stepping. */ - set_gdbarch_software_single_step (gdbarch, arm_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, arm_software_single_step); /* Breakpoints. */ switch (info.byte_order) @@ -114,9 +113,7 @@ armobsd_init_abi (struct gdbarch_info info, } } -void _initialize_armobsd_tdep (); -void -_initialize_armobsd_tdep () +INIT_GDB_FILE (armobsd_tdep) { gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_OPENBSD, armobsd_init_abi); diff --git a/gdb/arm-pikeos-tdep.c b/gdb/arm-pikeos-tdep.c index 428bb7d..8d24342 100644 --- a/gdb/arm-pikeos-tdep.c +++ b/gdb/arm-pikeos-tdep.c @@ -26,7 +26,7 @@ static void arm_pikeos_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) { /* Single stepping. */ - set_gdbarch_software_single_step (gdbarch, arm_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, arm_software_single_step); } /* The ARM PikeOS OSABI sniffer (see gdbarch_register_osabi_sniffer). @@ -73,9 +73,7 @@ arm_pikeos_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_arm_pikeos_tdep (); -void -_initialize_arm_pikeos_tdep () +INIT_GDB_FILE (arm_pikeos_tdep) { /* Register the sniffer for the PikeOS targets. */ gdbarch_register_osabi_sniffer (bfd_arch_arm, bfd_target_elf_flavour, diff --git a/gdb/arm-tdep.c b/gdb/arm-tdep.c index 5450056..a764825 100644 --- a/gdb/arm-tdep.c +++ b/gdb/arm-tdep.c @@ -1669,7 +1669,7 @@ arm_analyze_load_stack_chk_guard(CORE_ADDR pc, struct gdbarch *gdbarch, ldr Rn, .Label .... - .Lable: + .Label: .word __stack_chk_guard Since ldr/str is a very popular instruction, we can't use them as @@ -11015,9 +11015,7 @@ static void arm_analyze_prologue_test (); } #endif -void _initialize_arm_tdep (); -void -_initialize_arm_tdep () +INIT_GDB_FILE (arm_tdep) { long length; int i, j; diff --git a/gdb/arm-wince-tdep.c b/gdb/arm-wince-tdep.c index b1e1304..f14c8e8 100644 --- a/gdb/arm-wince-tdep.c +++ b/gdb/arm-wince-tdep.c @@ -135,7 +135,7 @@ arm_wince_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_skip_trampoline_code (gdbarch, arm_pe_skip_trampoline_code); /* Single stepping. */ - set_gdbarch_software_single_step (gdbarch, arm_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, arm_software_single_step); /* Skip call to __gccmain that gcc places in main. */ set_gdbarch_skip_main_prologue (gdbarch, arm_wince_skip_main_prologue); @@ -152,9 +152,7 @@ arm_wince_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_arm_wince_tdep (); -void -_initialize_arm_wince_tdep () +INIT_GDB_FILE (arm_wince_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_arm, bfd_target_coff_flavour, arm_wince_osabi_sniffer); diff --git a/gdb/auto-load.c b/gdb/auto-load.c index 4fc5b08..114a7d5 100644 --- a/gdb/auto-load.c +++ b/gdb/auto-load.c @@ -41,6 +41,7 @@ #include <algorithm> #include "gdbsupport/pathstuff.h" #include "cli/cli-style.h" +#include "gdbsupport/selftest.h" /* The section to look in for auto-loaded scripts (in file formats that support sections). @@ -162,6 +163,67 @@ show_auto_load_dir (struct ui_file *file, int from_tty, value); } +/* Substitute all occurrences of string FROM by string TO in STRING. + STRING will be updated in place as needed. FROM needs to be + delimited by IS_DIR_SEPARATOR or DIRNAME_SEPARATOR (or be located + at the start or end of STRING. */ + +static void +substitute_path_component (std::string &string, std::string_view from, + std::string_view to) +{ + for (size_t s = 0;;) + { + s = string.find (from, s); + if (s == std::string::npos) + break; + + if ((s == 0 || IS_DIR_SEPARATOR (string[s - 1]) + || string[s - 1] == DIRNAME_SEPARATOR) + && (s + from.size () == string.size () + || IS_DIR_SEPARATOR (string[s + from.size ()]) + || string[s + from.size ()] == DIRNAME_SEPARATOR)) + { + string.replace (s, from.size (), to); + s += to.size (); + } + else + s++; + } +} + +#if GDB_SELF_TEST + +namespace selftests { +namespace subst_path { + +static void +test_substitute_path_component () +{ + auto test = [] (std::string s, const char *from, const char *to, + const char *expected) + { + substitute_path_component (s, from, to); + SELF_CHECK (s == expected); + }; + + test ("/abc/$def/g", "abc", "xyz", "/xyz/$def/g"); + test ("abc/$def/g", "abc", "xyz", "xyz/$def/g"); + test ("/abc/$def/g", "$def", "xyz", "/abc/xyz/g"); + test ("/abc/$def/g", "g", "xyz", "/abc/$def/xyz"); + test ("/abc/$def/g", "ab", "xyz", "/abc/$def/g"); + test ("/abc/$def/g", "def", "xyz", "/abc/$def/g"); + test ("/abc/$def/g", "abc", "abc", "/abc/$def/g"); + test ("/abc/$def/g", "abc", "", "//$def/g"); + test ("/abc/$def/g", "abc/$def", "xyz", "/xyz/g"); + test ("/abc/$def/abc", "abc", "xyz", "/xyz/$def/xyz"); +} + +} +} + +#endif /* GDB_SELF_TEST */ + /* Directory list safe to hold auto-loaded files. It is not checked for absolute paths but they are strongly recommended. It is initialized by _initialize_auto_load. */ @@ -178,16 +240,15 @@ static std::vector<gdb::unique_xmalloc_ptr<char>> auto_load_safe_path_vec; static std::vector<gdb::unique_xmalloc_ptr<char>> auto_load_expand_dir_vars (const char *string) { - char *s = xstrdup (string); - substitute_path_component (&s, "$datadir", gdb_datadir.c_str ()); - substitute_path_component (&s, "$debugdir", debug_file_directory.c_str ()); + std::string s = string; + substitute_path_component (s, "$datadir", gdb_datadir.c_str ()); + substitute_path_component (s, "$debugdir", debug_file_directory.c_str ()); - if (debug_auto_load && strcmp (s, string) != 0) - auto_load_debug_printf ("Expanded $-variables to \"%s\".", s); + if (debug_auto_load && s != string) + auto_load_debug_printf ("Expanded $-variables to \"%s\".", s.c_str ()); std::vector<gdb::unique_xmalloc_ptr<char>> dir_vec - = dirnames_to_char_ptr_vec (s); - xfree(s); + = dirnames_to_char_ptr_vec (s.c_str ()); return dir_vec; } @@ -1507,9 +1568,7 @@ found and/or loaded."), gdb::observers::token auto_load_new_objfile_observer_token; -void _initialize_auto_load (); -void -_initialize_auto_load () +INIT_GDB_FILE (auto_load) { struct cmd_list_element *cmd; gdb::unique_xmalloc_ptr<char> scripts_directory_help, gdb_name_help, @@ -1650,4 +1709,9 @@ When non-zero, debugging output for files of 'set auto-load ...'\n\ is displayed."), NULL, show_debug_auto_load, &setdebuglist, &showdebuglist); + +#if GDB_SELF_TEST + selftests::register_test ("substitute_path_component", + selftests::subst_path::test_substitute_path_component); +#endif } @@ -609,9 +609,7 @@ info_auxv_command (const char *cmd, int from_tty) } } -void _initialize_auxv (); -void -_initialize_auxv () +INIT_GDB_FILE (auxv) { add_info ("auxv", info_auxv_command, _("Display the inferior's auxiliary vector.\n\ diff --git a/gdb/avr-tdep.c b/gdb/avr-tdep.c index 36e6ec4..6274529 100644 --- a/gdb/avr-tdep.c +++ b/gdb/avr-tdep.c @@ -1629,9 +1629,7 @@ avr_io_reg_read_command (const char *args, int from_tty) } } -void _initialize_avr_tdep (); -void -_initialize_avr_tdep () +INIT_GDB_FILE (avr_tdep) { gdbarch_register (bfd_arch_avr, avr_gdbarch_init); diff --git a/gdb/ax-gdb.c b/gdb/ax-gdb.c index e572465..54717bf 100644 --- a/gdb/ax-gdb.c +++ b/gdb/ax-gdb.c @@ -525,7 +525,7 @@ gen_var_ref (struct agent_expr *ax, struct axs_value *value, struct symbol *var) return computed_ops->tracepoint_var_ref (var, ax, value); /* I'm imitating the code in read_var_value. */ - switch (var->aclass ()) + switch (var->loc_class ()) { case LOC_CONST: /* A constant, like an enum value. */ ax_const_l (ax, (LONGEST) var->value_longest ()); @@ -538,8 +538,7 @@ gen_var_ref (struct agent_expr *ax, struct axs_value *value, struct symbol *var) break; case LOC_CONST_BYTES: - internal_error (_("gen_var_ref: LOC_CONST_BYTES " - "symbols are not supported")); + error (_("gen_var_ref: LOC_CONST_BYTES symbols are not supported")); /* Variable at a fixed location in memory. Easy. */ case LOC_STATIC: @@ -2634,9 +2633,7 @@ maint_agent_printf_command (const char *cmdrest, int from_tty) /* Initialization code. */ -void _initialize_ax_gdb (); -void -_initialize_ax_gdb () +INIT_GDB_FILE (ax_gdb) { add_cmd ("agent", class_maintenance, maint_agent_command, _("\ diff --git a/gdb/bfin-linux-tdep.c b/gdb/bfin-linux-tdep.c index 3ba3146..d84f800 100644 --- a/gdb/bfin-linux-tdep.c +++ b/gdb/bfin-linux-tdep.c @@ -161,9 +161,7 @@ bfin_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) bfin_linux_get_syscall_number); } -void _initialize_bfin_linux_tdep (); -void -_initialize_bfin_linux_tdep () +INIT_GDB_FILE (bfin_linux_tdep) { gdbarch_register_osabi (bfd_arch_bfin, 0, GDB_OSABI_LINUX, bfin_linux_init_abi); diff --git a/gdb/bfin-tdep.c b/gdb/bfin-tdep.c index 32d9371..3a96e9f 100644 --- a/gdb/bfin-tdep.c +++ b/gdb/bfin-tdep.c @@ -837,9 +837,7 @@ bfin_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_bfin_tdep (); -void -_initialize_bfin_tdep () +INIT_GDB_FILE (bfin_tdep) { gdbarch_register (bfd_arch_bfin, bfin_gdbarch_init); } diff --git a/gdb/block.c b/gdb/block.c index fdf209c..5ed2534 100644 --- a/gdb/block.c +++ b/gdb/block.c @@ -618,7 +618,7 @@ block_iterator_next (struct block_iterator *iterator) bool best_symbol (struct symbol *a, const domain_search_flags domain) { - if (a->aclass () == LOC_UNRESOLVED) + if (a->loc_class () == LOC_UNRESOLVED) return false; if ((domain & SEARCH_VAR_DOMAIN) != 0) @@ -644,10 +644,10 @@ better_symbol (struct symbol *a, struct symbol *b, if (b->matches (domain) && !a->matches (domain)) return b; - if (a->aclass () != LOC_UNRESOLVED && b->aclass () == LOC_UNRESOLVED) + if (a->loc_class () != LOC_UNRESOLVED && b->loc_class () == LOC_UNRESOLVED) return a; - if (b->aclass () != LOC_UNRESOLVED && a->aclass () == LOC_UNRESOLVED) + if (b->loc_class () != LOC_UNRESOLVED && a->loc_class () == LOC_UNRESOLVED) return b; return a; @@ -924,9 +924,7 @@ maintenance_info_blocks (const char *arg, int from_tty) -void _initialize_block (); -void -_initialize_block () +INIT_GDB_FILE (block) { add_cmd ("blocks", class_maintenance, maintenance_info_blocks, _("\ diff --git a/gdb/bpf-tdep.c b/gdb/bpf-tdep.c index 2c95607..be01e8b 100644 --- a/gdb/bpf-tdep.c +++ b/gdb/bpf-tdep.c @@ -368,9 +368,7 @@ bpf_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_bpf_tdep (); -void -_initialize_bpf_tdep () +INIT_GDB_FILE (bpf_tdep) { gdbarch_register (bfd_arch_bpf, bpf_gdbarch_init); diff --git a/gdb/break-catch-exec.c b/gdb/break-catch-exec.c index 6716437..570018c 100644 --- a/gdb/break-catch-exec.c +++ b/gdb/break-catch-exec.c @@ -213,9 +213,7 @@ catch_exec_command_1 (const char *arg, int from_tty, install_breakpoint (0, std::move (c), 1); } -void _initialize_break_catch_exec (); -void -_initialize_break_catch_exec () +INIT_GDB_FILE (break_catch_exec) { add_catch_command ("exec", _("Catch calls to exec."), catch_exec_command_1, diff --git a/gdb/break-catch-fork.c b/gdb/break-catch-fork.c index cba3753..c8a6330 100644 --- a/gdb/break-catch-fork.c +++ b/gdb/break-catch-fork.c @@ -242,9 +242,7 @@ catch_fork_command_1 (const char *arg, int from_tty, } } -void _initialize_break_catch_fork (); -void -_initialize_break_catch_fork () +INIT_GDB_FILE (break_catch_fork) { add_catch_command ("fork", _("Catch calls to fork."), catch_fork_command_1, diff --git a/gdb/break-catch-load.c b/gdb/break-catch-load.c index 5e290fd..b5594c2 100644 --- a/gdb/break-catch-load.c +++ b/gdb/break-catch-load.c @@ -22,9 +22,8 @@ #include "arch-utils.h" #include "breakpoint.h" #include "cli/cli-decode.h" -#include "mi/mi-common.h" #include "progspace.h" -#include "solist.h" +#include "solib.h" #include "target.h" #include "valprint.h" @@ -119,7 +118,7 @@ solib_catchpoint::check_status (struct bpstat *bs) for (solib *iter : current_program_space->added_solibs) { if (!regex - || compiled->exec (iter->so_name.c_str (), 0, nullptr, 0) == 0) + || compiled->exec (iter->name.c_str (), 0, nullptr, 0) == 0) return; } } @@ -264,9 +263,7 @@ catch_unload_command_1 (const char *arg, int from_tty, catch_load_or_unload (arg, from_tty, 0, command); } -void _initialize_break_catch_load (); -void -_initialize_break_catch_load () +INIT_GDB_FILE (break_catch_load) { add_catch_command ("load", _("Catch loads of shared libraries.\n\ Usage: catch load [REGEX]\n\ diff --git a/gdb/break-catch-sig.c b/gdb/break-catch-sig.c index fb5d202..9e1c6d6 100644 --- a/gdb/break-catch-sig.c +++ b/gdb/break-catch-sig.c @@ -18,9 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "arch-utils.h" -#include <ctype.h> #include "breakpoint.h" -#include "cli/cli-cmds.h" #include "inferior.h" #include "infrun.h" #include "annotate.h" @@ -409,9 +407,7 @@ catch_signal_command (const char *arg, int from_tty, create_signal_catchpoint (tempflag, std::move (filter), catch_all); } -void _initialize_break_catch_sig (); -void -_initialize_break_catch_sig () +INIT_GDB_FILE (break_catch_sig) { add_catch_command ("signal", _("\ Catch signals by their names and/or numbers.\n\ diff --git a/gdb/break-catch-syscall.c b/gdb/break-catch-syscall.c index 348ff41..96f22a1 100644 --- a/gdb/break-catch-syscall.c +++ b/gdb/break-catch-syscall.c @@ -19,7 +19,6 @@ #include <ctype.h> #include "breakpoint.h" -#include "cli/cli-cmds.h" #include "inferior.h" #include "cli/cli-utils.h" #include "annotate.h" @@ -423,7 +422,7 @@ catch_syscall_command_1 (const char *arg, int from_tty, struct syscall s; struct gdbarch *gdbarch = get_current_arch (); - /* Checking if the feature if supported. */ + /* Checking if the feature is supported. */ if (gdbarch_get_syscall_number_p (gdbarch) == 0) error (_("The feature 'catch syscall' is not supported on \ this architecture yet.")); @@ -570,9 +569,7 @@ clear_syscall_counts (struct inferior *inf) inf_data->syscalls_counts.clear (); } -void _initialize_break_catch_syscall (); -void -_initialize_break_catch_syscall () +INIT_GDB_FILE (break_catch_syscall) { gdb::observers::inferior_exit.attach (clear_syscall_counts, "break-catch-syscall"); diff --git a/gdb/break-catch-throw.c b/gdb/break-catch-throw.c index 41213e4..6da38eb 100644 --- a/gdb/break-catch-throw.c +++ b/gdb/break-catch-throw.c @@ -25,12 +25,8 @@ #include "annotate.h" #include "valprint.h" #include "cli/cli-utils.h" -#include "completer.h" -#include "gdbsupport/gdb_obstack.h" #include "mi/mi-common.h" -#include "linespec.h" #include "probe.h" -#include "objfiles.h" #include "cp-abi.h" #include "gdbsupport/gdb_regex.h" #include "cp-support.h" @@ -499,9 +495,7 @@ static const struct internalvar_funcs exception_funcs = -void _initialize_break_catch_throw (); -void -_initialize_break_catch_throw () +INIT_GDB_FILE (break_catch_throw) { /* Add catch and tcatch sub-commands. */ add_catch_command ("catch", _("\ diff --git a/gdb/break-cond-parse.c b/gdb/break-cond-parse.c index 705f4f6..31b5343 100644 --- a/gdb/break-cond-parse.c +++ b/gdb/break-cond-parse.c @@ -23,7 +23,6 @@ #include "break-cond-parse.h" #include "tid-parse.h" #include "ada-lang.h" -#include "exceptions.h" /* When parsing tokens from a string, which direction are we parsing? @@ -569,10 +568,10 @@ test (const char *input, const char *condition, int thread = -1, gdb::unique_xmalloc_ptr<char> extracted_rest; int extracted_thread, extracted_inferior, extracted_task; bool extracted_force_condition; - std::string exception_msg, error_str; + std::string exception_msg; - if (error_msg != nullptr) - error_str = std::string (error_msg) + "\n"; + if (error_msg == nullptr) + error_msg = ""; try { @@ -584,10 +583,7 @@ test (const char *input, const char *condition, int thread = -1, } catch (const gdb_exception_error &ex) { - string_file buf; - - exception_print (&buf, ex); - exception_msg = buf.release (); + exception_msg = ex.what (); } if ((condition == nullptr) != (extracted_condition.get () == nullptr) @@ -599,7 +595,7 @@ test (const char *input, const char *condition, int thread = -1, || inferior != extracted_inferior || task != extracted_task || force != extracted_force_condition - || exception_msg != error_str) + || exception_msg != error_msg) { if (run_verbose ()) { @@ -687,9 +683,7 @@ create_breakpoint_parse_arg_string_tests () } /* namespace selftests */ #endif /* GDB_SELF_TEST */ -void _initialize_break_cond_parse (); -void -_initialize_break_cond_parse () +INIT_GDB_FILE (break_cond_parse) { #if GDB_SELF_TEST selftests::register_test diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c index f44ac45..4609342 100644 --- a/gdb/breakpoint.c +++ b/gdb/breakpoint.c @@ -50,7 +50,6 @@ #include "cli/cli-script.h" #include "block.h" #include "solib.h" -#include "solist.h" #include "observable.h" #include "memattr.h" #include "ada-lang.h" @@ -255,14 +254,22 @@ DIAGNOSTIC_POP static std::string breakpoint_location_address_str (const bp_location *bl) { - std::string str = string_printf ("Breakpoint %d (%s) at address %s", + std::string str = string_printf ("Breakpoint %d (%s) ", bl->owner->number, - host_address_to_string (bl), - paddress (bl->gdbarch, bl->address)); + host_address_to_string (bl)); - std::string loc_string = bl->to_string (); - if (!loc_string.empty ()) - str += string_printf (" %s", loc_string.c_str ()); + if (bl_address_is_meaningful (bl)) + { + gdb_assert (bl->gdbarch != nullptr); + str += string_printf ("at address %s", + paddress (bl->gdbarch, bl->address)); + + std::string loc_string = bl->to_string (); + if (!loc_string.empty ()) + str += string_printf (" %s", loc_string.c_str ()); + } + else + str += "with dummy location"; return str; } @@ -721,7 +728,8 @@ all_tracepoints () tracepoint_iterator (breakpoint_chain.end ())); } -/* Array is sorted by bp_location_is_less_than - primarily by the ADDRESS. */ +/* Array is sorted by bp_location_ptr_is_less_than - primarily by the + ADDRESS. */ static std::vector<bp_location *> bp_locations; @@ -5136,7 +5144,7 @@ print_solib_event (bool is_catchpoint) if (!first) current_uiout->text (" "); first = false; - current_uiout->field_string ("library", iter->so_name); + current_uiout->field_string ("library", iter->name); current_uiout->text ("\n"); } } @@ -7504,7 +7512,7 @@ breakpoint_locations_match (const struct bp_location *loc1, else /* We compare bp_location.length in order to cover ranged breakpoints. Keep this in sync with - bp_location_is_less_than. */ + bp_location_ptr_is_less_than. */ return (breakpoint_address_match (loc1->pspace->aspace.get (), loc1->address, loc2->pspace->aspace.get (), @@ -8144,7 +8152,7 @@ disable_breakpoints_in_unloaded_shlib (program_space *pspace, const solib &solib target_terminal::ours_for_output (); warning (_("Temporarily disabling breakpoints " "for unloaded shared library \"%s\""), - solib.so_name.c_str ()); + solib.name.c_str ()); disabled_shlib_breaks = true; } } @@ -11205,14 +11213,17 @@ breakpoint_auto_delete (bpstat *bs) delete_breakpoint (&b); } -/* A comparison function for bp_location AP and BP being interfaced to - std::sort. Sort elements primarily by their ADDRESS (no matter what - bl_address_is_meaningful says), secondarily by ordering first - permanent elements and tertiarily just ensuring the array is sorted - stable way despite std::sort being an unstable algorithm. */ +/* A comparison function for bp_location pointers A and B being interfaced to + std::sort, for instance to sort an std::vector<bp_location *>. Sort + elements: + - primarily by their ADDRESS (no matter what bl_address_is_meaningful + says), + - secondarily by ordering first permanent elements, and + - tertiarily just ensuring the array is sorted in a stable way despite + std::sort being an unstable algorithm. */ -static int -bp_location_is_less_than (const bp_location *a, const bp_location *b) +static bool +bp_location_ptr_is_less_than (const bp_location *a, const bp_location *b) { if (a->address != b->address) return a->address < b->address; @@ -11250,6 +11261,15 @@ bp_location_is_less_than (const bp_location *a, const bp_location *b) return a < b; } +/* A comparison function for bp_locations A and B being interfaced to + std::sort, for instance to sort an std::vector<bp_location>. */ + +static bool +bp_location_is_less_than (const bp_location &a, const bp_location &b) +{ + return bp_location_ptr_is_less_than (&a, &b); +} + /* Set bp_locations_placed_address_before_address_max and bp_locations_shadow_len_after_address_max according to the current content of the bp_locations array. */ @@ -11455,7 +11475,7 @@ update_global_location_list (enum ugll_insert_mode insert_mode) handle_automatic_hardware_breakpoints (loc); std::sort (bp_locations.begin (), bp_locations.end (), - bp_location_is_less_than); + bp_location_ptr_is_less_than); bp_locations_target_extensions_update (); @@ -11903,9 +11923,7 @@ breakpoint::add_location (bp_location &loc) auto ub = std::upper_bound (m_locations.begin (), m_locations.end (), loc, - [] (const bp_location &left, - const bp_location &right) - { return left.address < right.address; }); + bp_location_is_less_than); m_locations.insert (ub, loc); } @@ -13986,9 +14004,7 @@ int insert_single_step_breakpoints (struct gdbarch *gdbarch) { regcache *regcache = get_thread_regcache (inferior_thread ()); - std::vector<CORE_ADDR> next_pcs; - - next_pcs = gdbarch_software_single_step (gdbarch, regcache); + std::vector<CORE_ADDR> next_pcs = gdbarch_get_next_pcs (gdbarch, regcache); if (!next_pcs.empty ()) { @@ -14747,9 +14763,7 @@ static struct cmd_list_element *enablebreaklist = NULL; cmd_list_element *commands_cmd_element = nullptr; -void _initialize_breakpoint (); -void -_initialize_breakpoint () +INIT_GDB_FILE (breakpoint) { struct cmd_list_element *c; diff --git a/gdb/breakpoint.h b/gdb/breakpoint.h index 6b421f2..9341112 100644 --- a/gdb/breakpoint.h +++ b/gdb/breakpoint.h @@ -425,7 +425,9 @@ public: simplicity is more important than memory usage for breakpoints. */ /* Architecture associated with this location's address. May be - different from the breakpoint architecture. */ + different from the breakpoint architecture. Not every location has + an address (e.g. see add_dummy_location), so not every location has + an associated gdbarch -- this can be NULL for a valid location. */ struct gdbarch *gdbarch = NULL; /* The program space associated with this breakpoint location diff --git a/gdb/bsd-kvm.c b/gdb/bsd-kvm.c index 5158fb6..baffa76 100644 --- a/gdb/bsd-kvm.c +++ b/gdb/bsd-kvm.c @@ -388,11 +388,11 @@ Generic command for manipulating the kernel memory interface."), #ifndef HAVE_STRUCT_THREAD_TD_PCB add_cmd ("proc", class_obscure, bsd_kvm_proc_cmd, - _("Set current context from proc address"), &bsd_kvm_cmdlist); + _("Set current context from proc address."), &bsd_kvm_cmdlist); #endif add_cmd ("pcb", class_obscure, bsd_kvm_pcb_cmd, /* i18n: PCB == "Process Control Block". */ - _("Set current context from pcb address"), &bsd_kvm_cmdlist); + _("Set current context from pcb address."), &bsd_kvm_cmdlist); /* Some notes on the ptid usage on this target. diff --git a/gdb/bsd-uthread.c b/gdb/bsd-uthread.c index 341aea9..4509376 100644 --- a/gdb/bsd-uthread.c +++ b/gdb/bsd-uthread.c @@ -25,7 +25,6 @@ #include "observable.h" #include "regcache.h" #include "solib.h" -#include "solist.h" #include "symfile.h" #include "target.h" @@ -280,13 +279,13 @@ bsd_uthread_solib_loaded (solib &so) for (names = bsd_uthread_solib_names; *names; names++) { - if (startswith (so.so_original_name, *names)) + if (startswith (so.original_name, *names)) { solib_read_symbols (so, 0); if (bsd_uthread_activate (so.objfile)) { - bsd_uthread_solib_name = so.so_original_name; + bsd_uthread_solib_name = so.original_name; return; } } @@ -300,7 +299,7 @@ bsd_uthread_solib_unloaded (program_space *pspace, const solib &so, if (bsd_uthread_solib_name.empty () || still_in_use) return; - if (so.so_original_name == bsd_uthread_solib_name) + if (so.original_name == bsd_uthread_solib_name) bsd_uthread_deactivate (); } @@ -541,9 +540,7 @@ bsd_uthread_target::pid_to_str (ptid_t ptid) return normal_pid_to_str (ptid); } -void _initialize_bsd_uthread (); -void -_initialize_bsd_uthread () +INIT_GDB_FILE (bsd_uthread) { gdb::observers::inferior_created.attach (bsd_uthread_inferior_created, "bsd-uthread"); diff --git a/gdb/btrace.c b/gdb/btrace.c index 3d883c5..b23de88 100644 --- a/gdb/btrace.c +++ b/gdb/btrace.c @@ -3501,9 +3501,7 @@ show_maint_btrace_pt_skip_pad (struct ui_file *file, int from_tty, /* Initialize btrace maintenance commands. */ -void _initialize_btrace (); -void -_initialize_btrace () +INIT_GDB_FILE (btrace) { add_cmd ("btrace", class_maintenance, maint_info_btrace_cmd, _("Info about branch tracing data."), &maintenanceinfolist); diff --git a/gdb/build-id.c b/gdb/build-id.c index 02602af..0ecd79f 100644 --- a/gdb/build-id.c +++ b/gdb/build-id.c @@ -29,6 +29,7 @@ #include "gdbsupport/scoped_fd.h" #include "debuginfod-support.h" #include "extension.h" +#include "inferior.h" /* See build-id.h. */ @@ -128,8 +129,9 @@ build_id_to_debug_bfd_1 (const std::string &original_link, if (supports_target_stat != TRIBOOL_FALSE) { struct stat sb; - int res = target_fileio_stat (nullptr, link_on_target, &sb, - &target_errno); + int res = target_fileio_lstat (current_inferior (), + link_on_target, &sb, + &target_errno); if (res != 0 && target_errno != FILEIO_ENOSYS) { @@ -157,7 +159,7 @@ build_id_to_debug_bfd_1 (const std::string &original_link, the path doesn't exist, but we just assume that anything other than EINVAL indicates the path doesn't exist. */ std::optional<std::string> link_target - = target_fileio_readlink (nullptr, link_on_target, + = target_fileio_readlink (current_inferior (), link_on_target, &target_errno); if (link_target.has_value () || target_errno == FILEIO_EINVAL) diff --git a/gdb/c-exp.y b/gdb/c-exp.y index f53a138..8c6e460 100644 --- a/gdb/c-exp.y +++ b/gdb/c-exp.y @@ -3042,15 +3042,11 @@ classify_name (struct parser_state *par_state, const struct block *block, std::string copy = copy_name (yylval.sval); - /* Initialize this in case we *don't* use it in this call; that way - we can refer to it unconditionally below. */ - memset (&is_a_field_of_this, 0, sizeof (is_a_field_of_this)); - bsym = lookup_symbol (copy.c_str (), block, SEARCH_VFT, par_state->language ()->name_of_this () ? &is_a_field_of_this : NULL); - if (bsym.symbol && bsym.symbol->aclass () == LOC_BLOCK) + if (bsym.symbol && bsym.symbol->loc_class () == LOC_BLOCK) { yylval.ssym.sym = bsym; yylval.ssym.is_a_field_of_this = is_a_field_of_this.type != NULL; @@ -3098,7 +3094,7 @@ classify_name (struct parser_state *par_state, const struct block *block, } } - if (bsym.symbol && bsym.symbol->aclass () == LOC_TYPEDEF) + if (bsym.symbol && bsym.symbol->loc_class () == LOC_TYPEDEF) { yylval.tsym.type = bsym.symbol->type (); return TYPENAME; @@ -3193,7 +3189,7 @@ classify_inner_name (struct parser_state *par_state, return ERROR; } - switch (yylval.ssym.sym.symbol->aclass ()) + switch (yylval.ssym.sym.symbol->loc_class ()) { case LOC_BLOCK: case LOC_LABEL: @@ -3396,18 +3392,18 @@ c_parse (struct parser_state *par_state) c_parse_state cstate; scoped_restore cstate_restore = make_scoped_restore (&cpstate, &cstate); - gdb::unique_xmalloc_ptr<struct macro_scope> macro_scope; + macro_scope macro_scope; if (par_state->expression_context_block) macro_scope = sal_macro_scope (find_pc_line (par_state->expression_context_pc, 0)); else macro_scope = default_macro_scope (); - if (! macro_scope) + if (!macro_scope.is_valid ()) macro_scope = user_macro_scope (); scoped_restore restore_macro_scope - = make_scoped_restore (&expression_macro_scope, macro_scope.get ()); + = make_scoped_restore (&expression_macro_scope, ¯o_scope); scoped_restore restore_yydebug = make_scoped_restore (&yydebug, par_state->debug); diff --git a/gdb/c-lang.c b/gdb/c-lang.c index f052401..9fccc1f 100644 --- a/gdb/c-lang.c +++ b/gdb/c-lang.c @@ -484,13 +484,6 @@ convert_hex (struct type *type, const char *p, return p; } -#define ADVANCE \ - do { \ - ++p; \ - if (p == limit) \ - error (_("Malformed escape sequence")); \ - } while (0) - /* Convert an escape sequence to a target format. TYPE is the target character type to use, and DEST_CHARSET is the name of the target character set. The backslash of the escape sequence is at *P, and @@ -502,18 +495,29 @@ static const char * convert_escape (struct type *type, const char *dest_charset, const char *p, const char *limit, struct obstack *output) { + auto advance = [&] () + { + ++p; + if (p == limit) + error (_("Malformed escape sequence")); + }; + /* Skip the backslash. */ - ADVANCE; + advance (); switch (*p) { case '\\': - obstack_1grow (output, '\\'); + /* Convert the backslash itself. This is probably overkill but + it doesn't hurt to do the full conversion. */ + convert_between_encodings (host_charset (), dest_charset, + (const gdb_byte *) p, 1, 1, + output, translit_none); ++p; break; case 'x': - ADVANCE; + advance (); if (!ISXDIGIT (*p)) error (_("\\x used with no following hex digits.")); p = convert_hex (type, p, limit, output); @@ -535,7 +539,7 @@ convert_escape (struct type *type, const char *dest_charset, { int length = *p == 'u' ? 4 : 8; - ADVANCE; + advance (); if (!ISXDIGIT (*p)) error (_("\\u used with no following hex digits")); p = convert_ucn (p, limit, dest_charset, output, length); diff --git a/gdb/c-typeprint.c b/gdb/c-typeprint.c index df7bdbe..be19987 100644 --- a/gdb/c-typeprint.c +++ b/gdb/c-typeprint.c @@ -251,8 +251,8 @@ cp_type_print_method_args (struct type *mtype, const char *prefix, enum language language, const struct type_print_options *flags) { - struct field *args = mtype->fields (); - int nargs = mtype->num_fields (); + auto args = mtype->fields (); + int nargs = args.size (); int varargs = mtype->has_varargs (); int i; @@ -515,16 +515,15 @@ c_type_print_args (struct type *type, struct ui_file *stream, int linkage_name, enum language language, const struct type_print_options *flags) { - int i; int printed_any = 0; gdb_printf (stream, "("); - for (i = 0; i < type->num_fields (); i++) + for (const auto &field : type->fields ()) { struct type *param_type; - if (type->field (i).is_artificial () && linkage_name) + if (field.is_artificial () && linkage_name) continue; if (printed_any) @@ -533,7 +532,7 @@ c_type_print_args (struct type *type, struct ui_file *stream, stream->wrap_here (4); } - param_type = type->field (i).type (); + param_type = field.type (); if (language == language_cplus && linkage_name) { @@ -815,7 +814,7 @@ c_type_print_template_args (const struct type_print_options *flags, { struct symbol *sym = TYPE_TEMPLATE_ARGUMENT (type, i); - if (sym->aclass () != LOC_TYPEDEF) + if (sym->loc_class () != LOC_TYPEDEF) continue; if (first) diff --git a/gdb/charset.c b/gdb/charset.c index 3e37ec9..2593625 100644 --- a/gdb/charset.c +++ b/gdb/charset.c @@ -983,9 +983,7 @@ intermediate_encoding (void) #endif /* USE_INTERMEDIATE_ENCODING_FUNCTION */ -void _initialize_charset (); -void -_initialize_charset () +INIT_GDB_FILE (charset) { /* The first element is always "auto". */ charsets.charsets.push_back (xstrdup ("auto")); diff --git a/gdb/cli/cli-cmds.c b/gdb/cli/cli-cmds.c index 9a5021f..a15a04a 100644 --- a/gdb/cli/cli-cmds.c +++ b/gdb/cli/cli-cmds.c @@ -51,6 +51,7 @@ #include "cli/cli-cmds.h" #include "cli/cli-style.h" #include "cli/cli-utils.h" +#include "terminal.h" #include "extension.h" #include "gdbsupport/pathstuff.h" @@ -949,9 +950,27 @@ shell_escape (const char *arg, int from_tty) static void shell_command (const char *arg, int from_tty) { + scoped_gdb_ttystate save_restore_gdb_ttystate; + restore_initial_gdb_ttystate (); + shell_escape (arg, from_tty); } +/* Completion for the shell command. Currently, this just uses filename + completion, but we could, potentially, complete command names from $PATH + for the first word, which would make this even more shell like. */ + +static void +shell_command_completer (struct cmd_list_element *ignore, + completion_tracker &tracker, + const char *text, const char * /* word */) +{ + tracker.set_use_custom_word_point (true); + const char *word + = advance_to_filename_maybe_quoted_complete_word_point (tracker, text); + filename_maybe_quoted_completer (ignore, tracker, text, word); +} + static void edit_command (const char *arg, int from_tty) { @@ -1178,8 +1197,32 @@ pipe_command_completer (struct cmd_list_element *ignore, return; } - /* We're past the delimiter. What follows is a shell command, which - we don't know how to complete. */ + /* We're past the delimiter now, or at least, DELIM points to the + delimiter string. Update TEXT to point to the start of whatever + appears after the delimiter. */ + text = skip_spaces (delim + strlen (delimiter)); + + /* We really are past the delimiter now, so offer completions. This is + like GDB's "shell" command, currently we only offer filename + completion, but in the future this could be improved by offering + completion of command names from $PATH. + + What we don't do here is offer completions for the empty string. It + is assumed that the first word after the delimiter is going to be a + command name from $PATH, not a filename, so if the user has typed + nothing (yet) and tries to complete, there's no point offering a list + of files from the current directory. + + Once the user has started to type something though, then we do start + offering filename completions. */ + if (*text == '\0') + return; + + tracker.set_use_custom_word_point (true); + tracker.advance_custom_word_point_by (text - org_text); + const char *word + = advance_to_filename_maybe_quoted_complete_word_point (tracker, text); + filename_maybe_quoted_completer (ignore, tracker, text, word); } /* Helper for the list_command function. Prints the lines around (and @@ -2578,9 +2621,7 @@ shell_internal_fn (struct gdbarch *gdbarch, return value::allocate_optimized_out (int_type); } -void _initialize_cli_cmds (); -void -_initialize_cli_cmds () +INIT_GDB_FILE (cli_cmds) { struct cmd_list_element *c; @@ -2803,7 +2844,7 @@ the previous command number shown."), = add_com ("shell", class_support, shell_command, _("\ Execute the rest of the line as a shell command.\n\ With no arguments, run an inferior shell.")); - set_cmd_completer (shell_cmd, deprecated_filename_completer); + set_cmd_completer_handle_brkchars (shell_cmd, shell_command_completer); add_com_alias ("!", shell_cmd, class_support, 0); @@ -2861,6 +2902,7 @@ This can be changed using \"set listsize\", and the current value\n\ can be shown using \"show listsize\".")); add_com_alias ("l", list_cmd, class_files, 1); + set_cmd_completer(list_cmd, location_completer); c = add_com ("disassemble", class_vars, disassemble_command, _("\ Disassemble a specified section of memory.\n\ diff --git a/gdb/cli/cli-dump.c b/gdb/cli/cli-dump.c index 3055734..afbbea6 100644 --- a/gdb/cli/cli-dump.c +++ b/gdb/cli/cli-dump.c @@ -564,9 +564,7 @@ restore_command (const char *args, int from_tty) } } -void _initialize_cli_dump (); -void -_initialize_cli_dump () +INIT_GDB_FILE (cli_dump) { struct cmd_list_element *c; diff --git a/gdb/cli/cli-interp.c b/gdb/cli/cli-interp.c index 32ba9d9..d7b73df 100644 --- a/gdb/cli/cli-interp.c +++ b/gdb/cli/cli-interp.c @@ -321,9 +321,7 @@ cli_interp_factory (const char *name) /* Standard gdb initialization hook. */ -void _initialize_cli_interp (); -void -_initialize_cli_interp () +INIT_GDB_FILE (cli_interp) { interp_factory_register (INTERP_CONSOLE, cli_interp_factory); } diff --git a/gdb/cli/cli-logging.c b/gdb/cli/cli-logging.c index d225533..d6eb6c2 100644 --- a/gdb/cli/cli-logging.c +++ b/gdb/cli/cli-logging.c @@ -202,9 +202,7 @@ show_logging_enabled (struct ui_file *file, int from_tty, gdb_printf (file, _("off: Logging is disabled.\n")); } -void _initialize_cli_logging (); -void -_initialize_cli_logging () +INIT_GDB_FILE (cli_logging) { static struct cmd_list_element *set_logging_cmdlist, *show_logging_cmdlist; diff --git a/gdb/cli/cli-script.c b/gdb/cli/cli-script.c index bdbf850..3ea80a5 100644 --- a/gdb/cli/cli-script.c +++ b/gdb/cli/cli-script.c @@ -1751,9 +1751,7 @@ show_user_1 (struct cmd_list_element *c, const char *prefix, const char *name, } -void _initialize_cli_script (); -void -_initialize_cli_script () +INIT_GDB_FILE (cli_script) { struct cmd_list_element *c; diff --git a/gdb/cli/cli-style.c b/gdb/cli/cli-style.c index 34592f0..d6829f0 100644 --- a/gdb/cli/cli-style.c +++ b/gdb/cli/cli-style.c @@ -453,7 +453,7 @@ no_emojis () /* Emoji warning prefix. */ static std::string warning_prefix = "⚠️ "; -/* Implement 'show warning-prefix'. */ +/* Implement 'show style warning-prefix'. */ static void show_warning_prefix (struct ui_file *file, int from_tty, @@ -475,7 +475,7 @@ print_warning_prefix (ui_file *file) /* Emoji error prefix. */ static std::string error_prefix = "❌️ "; -/* Implement 'show error-prefix'. */ +/* Implement 'show style error-prefix'. */ static void show_error_prefix (struct ui_file *file, int from_tty, @@ -494,9 +494,7 @@ print_error_prefix (ui_file *file) gdb_puts (error_prefix.c_str (), file); } -void _initialize_cli_style (); -void -_initialize_cli_style () +INIT_GDB_FILE (cli_style) { add_setshow_prefix_cmd ("style", no_class, _("\ diff --git a/gdb/coff-pe-read.c b/gdb/coff-pe-read.c index 3a3611e..0061007 100644 --- a/gdb/coff-pe-read.c +++ b/gdb/coff-pe-read.c @@ -694,9 +694,7 @@ show_debug_coff_pe_read (struct ui_file *file, int from_tty, /* Adds "Set/show debug coff_pe_read" commands. */ -void _initialize_coff_pe_read (); -void -_initialize_coff_pe_read () +INIT_GDB_FILE (coff_pe_read) { add_setshow_zuinteger_cmd ("coff-pe-read", class_maintenance, &debug_coff_pe_read, diff --git a/gdb/coffread.c b/gdb/coffread.c index 8a87e9c..b69c06f 100644 --- a/gdb/coffread.c +++ b/gdb/coffread.c @@ -1567,7 +1567,7 @@ patch_opaque_types (struct symtab *s) Remove syms from the chain when their types are stored, but search the whole chain, as there may be several syms from different files with the same name. */ - if (real_sym->aclass () == LOC_TYPEDEF + if (real_sym->loc_class () == LOC_TYPEDEF && real_sym->domain () == TYPE_DOMAIN && real_sym->type ()->code () == TYPE_CODE_PTR && real_sym->type ()->target_type ()->length () != 0) @@ -1614,7 +1614,7 @@ static const struct symbol_register_ops coff_register_funcs = { coff_reg_to_regnum }; -/* The "aclass" index for computed COFF symbols. */ +/* The "loc_class" index for computed COFF symbols. */ static int coff_register_index; @@ -1646,7 +1646,7 @@ process_coff_symbol (struct coff_symbol *cs, (lookup_function_type (decode_function_type (cs, cs->c_type, aux, objfile))); - sym->set_aclass_index (LOC_BLOCK); + sym->set_loc_class_index (LOC_BLOCK); if (cs->c_sclass == C_STAT || cs->c_sclass == C_THUMBSTAT || cs->c_sclass == C_THUMBSTATFUNC) add_symbol_to_list (sym, get_file_symbols ()); @@ -1663,14 +1663,14 @@ process_coff_symbol (struct coff_symbol *cs, break; case C_AUTO: - sym->set_aclass_index (LOC_LOCAL); + sym->set_loc_class_index (LOC_LOCAL); add_symbol_to_list (sym, get_local_symbols ()); break; case C_THUMBEXT: case C_THUMBEXTFUNC: case C_EXT: - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); sym->set_value_address ((CORE_ADDR) cs->c_value + objfile->section_offsets[SECT_OFF_TEXT (objfile)]); add_symbol_to_list (sym, get_global_symbols ()); @@ -1679,7 +1679,7 @@ process_coff_symbol (struct coff_symbol *cs, case C_THUMBSTAT: case C_THUMBSTATFUNC: case C_STAT: - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); sym->set_value_address ((CORE_ADDR) cs->c_value + objfile->section_offsets[SECT_OFF_TEXT (objfile)]); if (within_function) @@ -1698,7 +1698,7 @@ process_coff_symbol (struct coff_symbol *cs, case C_GLBLREG: #endif case C_REG: - sym->set_aclass_index (coff_register_index); + sym->set_loc_class_index (coff_register_index); sym->set_value_longest (cs->c_value); add_symbol_to_list (sym, get_local_symbols ()); break; @@ -1708,20 +1708,20 @@ process_coff_symbol (struct coff_symbol *cs, break; case C_ARG: - sym->set_aclass_index (LOC_ARG); + sym->set_loc_class_index (LOC_ARG); sym->set_is_argument (1); add_symbol_to_list (sym, get_local_symbols ()); break; case C_REGPARM: - sym->set_aclass_index (coff_register_index); + sym->set_loc_class_index (coff_register_index); sym->set_is_argument (1); sym->set_value_longest (cs->c_value); add_symbol_to_list (sym, get_local_symbols ()); break; case C_TPDEF: - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_domain (TYPE_DOMAIN); /* If type has no name, give it one. */ @@ -1776,7 +1776,7 @@ process_coff_symbol (struct coff_symbol *cs, case C_STRTAG: case C_UNTAG: case C_ENTAG: - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_domain (STRUCT_DOMAIN); /* Some compilers try to be helpful by inventing "fake" @@ -2165,7 +2165,7 @@ coff_read_enum_type (int index, int length, int lastsym, name = obstack_strdup (&objfile->objfile_obstack, name); sym->set_linkage_name (name); - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); sym->set_domain (VAR_DOMAIN); sym->set_value_longest (ms->c_value); add_symbol_to_list (sym, symlist); @@ -2248,9 +2248,7 @@ static const struct sym_fns coff_sym_fns = NULL, /* sym_probe_fns */ }; -void _initialize_coffread (); -void -_initialize_coffread () +INIT_GDB_FILE (coffread) { add_symtab_fns (bfd_target_coff_flavour, &coff_sym_fns); diff --git a/gdb/compile/compile-c-support.c b/gdb/compile/compile-c-support.c index 0d32350..ac8888f 100644 --- a/gdb/compile/compile-c-support.c +++ b/gdb/compile/compile-c-support.c @@ -185,18 +185,18 @@ static void write_macro_definitions (const struct block *block, CORE_ADDR pc, struct ui_file *file) { - gdb::unique_xmalloc_ptr<struct macro_scope> scope; + macro_scope scope; if (block != NULL) scope = sal_macro_scope (find_pc_line (pc, 0)); else scope = default_macro_scope (); - if (scope == NULL) + if (!scope.is_valid ()) scope = user_macro_scope (); - if (scope != NULL && scope->file != NULL && scope->file->table != NULL) + if (scope.is_valid () && scope.file->table != nullptr) { - macro_for_each_in_scope (scope->file, scope->line, + macro_for_each_in_scope (scope.file, scope.line, [&] (const char *name, const macro_definition *macro, macro_source_file *source, diff --git a/gdb/compile/compile-c-symbols.c b/gdb/compile/compile-c-symbols.c index b31592f..6578977 100644 --- a/gdb/compile/compile-c-symbols.c +++ b/gdb/compile/compile-c-symbols.c @@ -61,7 +61,7 @@ convert_one_symbol (compile_c_instance *context, context->error_symbol_once (sym.symbol); - if (sym.symbol->aclass () == LOC_LABEL) + if (sym.symbol->loc_class () == LOC_LABEL) sym_type = 0; else sym_type = context->convert_type (sym.symbol->type ()); @@ -79,7 +79,7 @@ convert_one_symbol (compile_c_instance *context, CORE_ADDR addr = 0; gdb::unique_xmalloc_ptr<char> symbol_name; - switch (sym.symbol->aclass ()) + switch (sym.symbol->loc_class ()) { case LOC_TYPEDEF: kind = GCC_C_SYMBOL_TYPEDEF; @@ -536,7 +536,7 @@ generate_c_for_for_one_variable (compile_instance *compiler, } else { - switch (sym->aclass ()) + switch (sym->loc_class ()) { case LOC_REGISTER: case LOC_ARG: diff --git a/gdb/compile/compile-cplus-symbols.c b/gdb/compile/compile-cplus-symbols.c index b03c4b9..96ebd84 100644 --- a/gdb/compile/compile-cplus-symbols.c +++ b/gdb/compile/compile-cplus-symbols.c @@ -53,7 +53,7 @@ convert_one_symbol (compile_cplus_instance *instance, instance->error_symbol_once (sym.symbol); - if (sym.symbol->aclass () == LOC_LABEL) + if (sym.symbol->loc_class () == LOC_LABEL) sym_type = 0; else sym_type = instance->convert_type (sym.symbol->type ()); @@ -70,7 +70,7 @@ convert_one_symbol (compile_cplus_instance *instance, std::string name; gdb::unique_xmalloc_ptr<char> symbol_name; - switch (sym.symbol->aclass ()) + switch (sym.symbol->loc_class ()) { case LOC_TYPEDEF: if (sym.symbol->type ()->code () == TYPE_CODE_TYPEDEF) diff --git a/gdb/compile/compile-cplus-types.c b/gdb/compile/compile-cplus-types.c index 56ef033..cf70fe4 100644 --- a/gdb/compile/compile-cplus-types.c +++ b/gdb/compile/compile-cplus-types.c @@ -1395,9 +1395,7 @@ gcc_cp_plugin::pop_binding_level (const char *debug_name) return pop_binding_level (); } -void _initialize_compile_cplus_types (); -void -_initialize_compile_cplus_types () +INIT_GDB_FILE (compile_cplus_types) { add_setshow_boolean_cmd ("compile-cplus-types", no_class, &debug_compile_cplus_types, _("\ diff --git a/gdb/compile/compile.c b/gdb/compile/compile.c index ab4cb0b..5d81ec1 100644 --- a/gdb/compile/compile.c +++ b/gdb/compile/compile.c @@ -45,6 +45,7 @@ #include "gdbsupport/pathstuff.h" #include "gdbsupport/scoped_ignore_signal.h" #include "gdbsupport/buildargv.h" +#include "gdbsupport/cleanups.h" /* Hold "compile" commands. */ @@ -868,9 +869,7 @@ compile_command (const char *args, int from_tty) /* See compile.h. */ cmd_list_element *compile_cmd_element = nullptr; -void _initialize_compile (); -void -_initialize_compile () +INIT_GDB_FILE (compile) { compile_cmd_element = add_prefix_cmd ("compile", class_obscure, compile_command, diff --git a/gdb/complaints.c b/gdb/complaints.c index 2f58af2..3c7f9bc 100644 --- a/gdb/complaints.c +++ b/gdb/complaints.c @@ -188,9 +188,7 @@ test_complaints () } /* namespace selftests */ #endif /* GDB_SELF_TEST */ -void _initialize_complaints (); -void -_initialize_complaints () +INIT_GDB_FILE (complaints) { add_setshow_zinteger_cmd ("complaints", class_support, &stop_whining, _("\ diff --git a/gdb/completer.c b/gdb/completer.c index 658a0c6..deecbc2 100644 --- a/gdb/completer.c +++ b/gdb/completer.c @@ -1008,7 +1008,7 @@ complete_files_symbols (completion_tracker &tracker, name, they cannot be asking for completion on files. */ if (strcspn (text, gdb_completer_file_name_break_characters) == text_len) - fn_list = make_source_files_completion_list (text, text); + fn_list = make_source_files_completion_list (text); } if (!fn_list.empty () && !tracker.have_completions ()) @@ -1059,7 +1059,7 @@ complete_source_filenames (const char *text) the user cannot be asking for completion on files. */ if (strcspn (text, gdb_completer_file_name_break_characters) == text_len) - return make_source_files_completion_list (text, text); + return make_source_files_completion_list (text); return {}; } @@ -1142,7 +1142,7 @@ collect_explicit_location_matches (completion_tracker &tracker, const char *source = string_or_empty (explicit_loc->source_filename.get ()); completion_list matches - = make_source_files_completion_list (source, source); + = make_source_files_completion_list (source); tracker.add_completions (std::move (matches)); } break; @@ -3513,9 +3513,7 @@ skip_over_slash_fmt (completion_tracker &tracker, const char **args) return false; } -void _initialize_completer (); -void -_initialize_completer () +INIT_GDB_FILE (completer) { /* Setup some readline completion globals. */ rl_completion_word_break_hook = gdb_completion_word_break_characters; diff --git a/gdb/config.in b/gdb/config.in index 426947e..efc3100 100644 --- a/gdb/config.in +++ b/gdb/config.in @@ -39,6 +39,9 @@ /* Define to BFD's default target vector. */ #undef DEFAULT_BFD_VEC +/* defined if dwarf format was requested. */ +#undef DWARF_FORMAT_AVAILABLE + /* Handle .ctf type-info sections */ #undef ENABLE_LIBCTF @@ -93,6 +96,9 @@ /* Define if amd-dbgapi is being linked in. */ #undef HAVE_AMD_DBGAPI +/* Define to 1 if you have the <asm/termios.h> header file. */ +#undef HAVE_ASM_TERMIOS_H + /* Define to 1 if you have the `btowc' function. */ #undef HAVE_BTOWC @@ -244,6 +250,9 @@ /* Define to 1 if you have the <inttypes.h> header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the <IOKit/serial/ioss.h> header file. */ +#undef HAVE_IOKIT_SERIAL_IOSS_H + /* Define to 1 if you have the `kinfo_getfile' function. */ #undef HAVE_KINFO_GETFILE @@ -639,6 +648,9 @@ */ #undef LT_OBJDIR +/* defined if mdebug format was requested. */ +#undef MDEBUG_FORMAT_AVAILABLE + /* Name of this package. */ #undef PACKAGE @@ -733,6 +745,9 @@ /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS +/* Which binary file formats were requested at configure time. */ +#undef SUPPORTED_BINARY_FILE_FORMATS + /* automatically load a system-wide gdbinit file */ #undef SYSTEM_GDBINIT diff --git a/gdb/configure b/gdb/configure index 5ee1982..cdea00f 100755 --- a/gdb/configure +++ b/gdb/configure @@ -706,6 +706,7 @@ LIBGUI LTLIBLZMA LIBLZMA HAVE_LIBLZMA +FORMAT_SRCS SER_HARDWIRE WERROR_CFLAGS WARN_CFLAGS @@ -932,6 +933,9 @@ with_relocated_sources with_auto_load_dir with_auto_load_safe_path enable_targets +enable_binary_file_formats +enable_gdb_mdebug_support +enable_gdb_dwarf_support with_amd_dbgapi enable_tui enable_gdbtk @@ -1643,6 +1647,16 @@ Optional Features: --disable-nls do not use Native Language Support --enable-targets=TARGETS alternative target configurations + --enable-binary-file-formats=FORMATS + enable support for selected file formats (default + 'all') available formats: coff, dbx, elf, macho, + mips, xcoff, all + --enable-gdb-mdebug-support + Enable support for the mdebug debuginfo format + (default 'yes') + --enable-gdb-dwarf-support + Enable support for the dwarf debuginfo format + (default 'yes') --enable-tui enable full-screen terminal user interface (TUI) --enable-gdbtk enable gdbtk graphical user interface (GUI) --enable-profiling enable profiling of GDB @@ -11499,7 +11513,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11502 "configure" +#line 11516 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11605,7 +11619,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11608 "configure" +#line 11622 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -24874,6 +24888,68 @@ esac fi +# Check whether --enable-binary_file_formats was given. +if test "${enable_binary_file_formats+set}" = set; then : + enableval=$enable_binary_file_formats; case "${enableval}" in + yes | "") as_fn_error $? "enable-binary-file-formats option must specify file formats or 'all'" "$LINENO" 5 + ;; + no) enable_binary_file_formats= ;; + *) enable_binary_file_formats=$enableval ;; +esac +else + enable_binary_file_formats=all +fi + + +# Check whether to support mdebug/ecoff debug information. +# Check whether --enable-gdb-mdebug-support was given. +if test "${enable_gdb_mdebug_support+set}" = set; then : + enableval=$enable_gdb_mdebug_support; + case $enableval in + yes | no) + ;; + *) + as_fn_error $? "bad value $enableval for --enable-gdb-mdebug-support" "$LINENO" 5 + ;; + esac + +else + enable_gdb_mdebug_support=yes +fi + + +if test "x${enable_gdb_mdebug_support}" != "xno"; then + CONFIG_SRCS="$CONFIG_SRCS mdebugread.c" + CONFIG_OBS="$CONFIG_OBS mdebugread.o" + +$as_echo "#define MDEBUG_FORMAT_AVAILABLE 1" >>confdefs.h + +fi + +# Check whether to support dwarf debug information +# Check whether --enable-gdb-dwarf-support was given. +if test "${enable_gdb_dwarf_support+set}" = set; then : + enableval=$enable_gdb_dwarf_support; + case $enableval in + yes | no) + ;; + *) + as_fn_error $? "bad value $enableval for --enable-gdb-dwarf-support" "$LINENO" 5 + ;; + esac + +else + enable_gdb_dwarf_support=yes +fi + + +if test "x${enable_gdb_dwarf_support}" != "xno"; then + +$as_echo "#define DWARF_FORMAT_AVAILABLE 1" >>confdefs.h + + CONFIG_SRCS="$CONFIG_SRCS \$(DWARF2_SRCS)" + CONFIG_OBS="$CONFIG_OBS \$(DWARF2_OBS)" +fi # See whether 64-bit bfd lib has been enabled. OLD_CPPFLAGS=$CPPFLAGS @@ -24928,10 +25004,21 @@ TARGET_OBS= all_targets= HAVE_NATIVE_GCORE_TARGET= +# File formats that will be enabled based on the selected +# target(s). These are chosen because they are required to +# compile one or more of the selected targets. +target_formats= + +# If all targets were requested, this is all formats that should +# accompany them. These are just the ones required for compilation +# to succeed, not the formats suggested based on targets. +all_target_formats="coff xcoff" + for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'` do if test "$targ_alias" = "all"; then all_targets=true + target_formats=$all_target_formats else # Canonicalize the secondary target names. result=`$ac_config_sub $targ_alias 2>/dev/null` @@ -28167,8 +28254,8 @@ int main () { - #if PY_MAJOR_VERSION != 3 - # error "We only support Python 3" + #if PY_VERSION_HEX < 0x03040000 + # error "Minimum supported Python version is 3.4" #endif Py_Initialize (); @@ -28944,11 +29031,20 @@ if test "${enable_gdb_compile+set}" = set; then : esac else - enable_gdb_compile=yes + enable_gdb_compile=default fi -if test "${enable_gdb_compile}" = yes; then +if test "${enable_gdb_compile}" = "default"; then + enable_gdb_compile=${enable_gdb_dwarf_support} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Defaulting compile support to '${enable_gdb_dwarf_support}'" >&5 +$as_echo "$as_me: WARNING: Defaulting compile support to '${enable_gdb_dwarf_support}'" >&2;} +fi + +if test "${enable_gdb_compile}" = "yes"; then + if test "${enable_gdb_dwarf_support}" = "no"; then + as_fn_error $? "enabling gdb compile requires dwarf support" "$LINENO" 5 + fi $as_echo "#define HAVE_COMPILE 1" >>confdefs.h @@ -29196,6 +29292,8 @@ $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi for ac_header in \ + IOKit/serial/ioss.h \ + asm/termios.h \ machine/reg.h \ nlist.h \ ptrace.h \ @@ -31559,6 +31657,12 @@ fi # Note that WIN32APILIBS is set by GDB_AC_COMMON. WIN32LIBS="$WIN32LIBS $WIN32APILIBS" +# Object files to be used when building with support for all file formats. +# This should not have elf or macho, as support for those formats depends +# on BFD enabling them as well. +all_binary_file_srcs="\$(dbx_SRCS) \$(mips_SRCS) \$(coff_SRCS) \$(xcoff_SRCS)" + +bfd_supports_elf=no # Add ELF support to GDB, but only if BFD includes ELF support. OLD_CFLAGS=$CFLAGS @@ -31576,7 +31680,7 @@ WIN32LIBS="$WIN32LIBS $WIN32APILIBS" CC="./libtool --quiet --mode=link $CC" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ELF support in BFD" >&5 $as_echo_n "checking for ELF support in BFD... " >&6; } -if ${gdb_cv_var_elf+:} false; then : +if ${gdb_cv_var_bfd_elf+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -31595,28 +31699,27 @@ return bfd_get_elf_phdr_upper_bound (NULL); } _ACEOF if ac_fn_c_try_link "$LINENO"; then : - gdb_cv_var_elf=yes + gdb_cv_var_bfd_elf=yes else - gdb_cv_var_elf=no + gdb_cv_var_bfd_elf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_var_elf" >&5 -$as_echo "$gdb_cv_var_elf" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_var_bfd_elf" >&5 +$as_echo "$gdb_cv_var_bfd_elf" >&6; } CC=$OLD_CC CFLAGS=$OLD_CFLAGS LDFLAGS=$OLD_LDFLAGS LIBS=$OLD_LIBS -if test "$gdb_cv_var_elf" = yes; then - CONFIG_OBS="$CONFIG_OBS elfread.o stap-probe.o dtrace-probe.o \ - gcore-elf.o elf-none-tdep.o" +if test "$gdb_cv_var_bfd_elf" = yes; then + CONFIG_OBS="$CONFIG_OBS gcore-elf.o elf-none-tdep.o" $as_echo "#define HAVE_ELF 1" >>confdefs.h - # -ldl is provided by bfd/Makfile.am (LIBDL) <PLUGINS>. + # -ldl is provided by bfd/Makefile.am (LIBDL) <PLUGINS>. if test "$plugins" = "yes"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5 $as_echo_n "checking for library containing dlopen... " >&6; } @@ -31675,9 +31778,12 @@ if test "$ac_res" != no; then : fi fi + bfd_supports_elf=yes + all_binary_file_srcs="$all_binary_file_srcs \$(elf_SRCS)" fi # Add macho support to GDB, but only if BFD includes it. +bfd_supports_macho=no OLD_CFLAGS=$CFLAGS OLD_LDFLAGS=$LDFLAGS @@ -31694,7 +31800,7 @@ fi CC="./libtool --quiet --mode=link $CC" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Mach-O support in BFD" >&5 $as_echo_n "checking for Mach-O support in BFD... " >&6; } -if ${gdb_cv_var_macho+:} false; then : +if ${gdb_cv_var_bfd_macho+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -31713,30 +31819,81 @@ return bfd_mach_o_lookup_command (NULL, 0, NULL); } _ACEOF if ac_fn_c_try_link "$LINENO"; then : - gdb_cv_var_macho=yes + gdb_cv_var_bfd_macho=yes else - gdb_cv_var_macho=no + gdb_cv_var_bfd_macho=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_var_macho" >&5 -$as_echo "$gdb_cv_var_macho" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_var_bfd_macho" >&5 +$as_echo "$gdb_cv_var_bfd_macho" >&6; } CC=$OLD_CC CFLAGS=$OLD_CFLAGS LDFLAGS=$OLD_LDFLAGS LIBS=$OLD_LIBS -if test "$gdb_cv_var_macho" = yes; then - CONFIG_OBS="$CONFIG_OBS machoread.o" +if test "$gdb_cv_var_bfd_macho" = yes; then + bfd_supports_macho=yes + all_binary_file_srcs="$all_binary_file_srcs \$(macho_SRCS)" +fi + +FORMAT_SRCS= + +if test "$enable_binary_file_formats" != "all"; then + # Formats that are required by some requested target(s). + # Warn users that they are added, so no one is surprised. + for req in $target_formats; do + case ,$enable_binary_file_formats, in + *,$req,*) + # Do nothing. + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"$req is required to support one or more requested targets. Adding it\"" >&5 +$as_echo "$as_me: WARNING: \"$req is required to support one or more requested targets. Adding it\"" >&2;} + enable_binary_file_formats="${enable_binary_file_formats},$req" + ;; + esac + done + + +cat >>confdefs.h <<_ACEOF +#define SUPPORTED_BINARY_FILE_FORMATS "$enable_binary_file_formats" +_ACEOF + fi +enable_binary_file_formats=$(echo $enable_binary_file_formats | sed 's/,/ /g') + +# Go through all requested and required binary file formats to compile +# GDB, and double check that we can compile them. +for format in $enable_binary_file_formats +do + if test "$format" = "elf" && test "$bfd_supports_elf" != "yes"; then + as_fn_error but BFD does not support it." "\"elf support was requested" "$LINENO" 5; + elif test "$format" = "macho" && test "$bfd_supports_macho" != "yes"; then + as_fn_error but BFD does not support it." "\"Mach-O support was requested" "$LINENO" 5; + fi + + if test "$format" = "all"; then + FORMAT_SRCS="$all_binary_file_srcs" + # We don't break here in case the user requested Mach-O or ELF, but + # BFD is not configured to support it. If we were to break, we would + # silently drop the requested support instead of erroring out. + else + fmt=$(echo "$format _SRCS" | sed 's/ //') + FORMAT_SRCS="$FORMAT_SRCS \$($fmt)" + fi +done + + + # Add any host-specific objects to GDB. CONFIG_OBS="${CONFIG_OBS} ${gdb_host_obs}" # If building on ELF, look for lzma support for embedded compressed debug info. -if test "$gdb_cv_var_elf" = yes; then +if test "$gdb_cv_var_bfd_elf" = yes; then # Check whether --with-lzma was given. if test "${with_lzma+set}" = set; then : diff --git a/gdb/configure.ac b/gdb/configure.ac index 5870a61..2ef53fe 100644 --- a/gdb/configure.ac +++ b/gdb/configure.ac @@ -191,6 +191,44 @@ AS_HELP_STRING([--enable-targets=TARGETS], [alternative target configurations]), ;; esac]) +AC_ARG_ENABLE(binary_file_formats, + AS_HELP_STRING([--enable-binary-file-formats=FORMATS], + [enable support for selected file formats (default 'all') + available formats: coff, dbx, elf, macho, mips, xcoff, all]), +[case "${enableval}" in + yes | "") AC_MSG_ERROR(enable-binary-file-formats option must specify file formats or 'all') + ;; + no) enable_binary_file_formats= ;; + *) enable_binary_file_formats=$enableval ;; +esac], [enable_binary_file_formats=all]) + +# Check whether to support mdebug/ecoff debug information. +AC_ARG_ENABLE(gdb-mdebug-support, +AS_HELP_STRING([--enable-gdb-mdebug-support], + [Enable support for the mdebug debuginfo format (default 'yes')]), +[GDB_CHECK_YES_NO_VAL([$enableval], [--enable-gdb-mdebug-support])], +[enable_gdb_mdebug_support=yes]) + +if test "x${enable_gdb_mdebug_support}" != "xno"; then + CONFIG_SRCS="$CONFIG_SRCS mdebugread.c" + CONFIG_OBS="$CONFIG_OBS mdebugread.o" + AC_DEFINE(MDEBUG_FORMAT_AVAILABLE, 1, + [defined if mdebug format was requested.]) +fi + +# Check whether to support dwarf debug information +AC_ARG_ENABLE(gdb-dwarf-support, +AS_HELP_STRING([--enable-gdb-dwarf-support], + [Enable support for the dwarf debuginfo format (default 'yes')]), +[GDB_CHECK_YES_NO_VAL([$enableval], [--enable-gdb-dwarf-support])], +[enable_gdb_dwarf_support=yes]) + +if test "x${enable_gdb_dwarf_support}" != "xno"; then + AC_DEFINE(DWARF_FORMAT_AVAILABLE, 1, + [defined if dwarf format was requested.]) + CONFIG_SRCS="$CONFIG_SRCS \$(DWARF2_SRCS)" + CONFIG_OBS="$CONFIG_OBS \$(DWARF2_OBS)" +fi BFD_64_BIT @@ -212,10 +250,21 @@ TARGET_OBS= all_targets= HAVE_NATIVE_GCORE_TARGET= +# File formats that will be enabled based on the selected +# target(s). These are chosen because they are required to +# compile one or more of the selected targets. +target_formats= + +# If all targets were requested, this is all formats that should +# accompany them. These are just the ones required for compilation +# to succeed, not the formats suggested based on targets. +all_target_formats="coff xcoff" + for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'` do if test "$targ_alias" = "all"; then all_targets=true + target_formats=$all_target_formats else # Canonicalize the secondary target names. result=`$ac_config_sub $targ_alias 2>/dev/null` @@ -740,8 +789,8 @@ AC_DEFUN([AC_TRY_LIBPYTHON], found_usable_python=no AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include "Python.h"]], [[ - #if PY_MAJOR_VERSION != 3 - # error "We only support Python 3" + #if PY_VERSION_HEX < 0x03040000 + # error "Minimum supported Python version is 3.4" #endif Py_Initialize (); ]])], @@ -1220,9 +1269,17 @@ AC_ARG_ENABLE([gdb-compile], AS_HELP_STRING([--enable-gdb-compile], [enable support for the compile subsystem, default 'yes']), [GDB_CHECK_YES_NO_VAL([$enableval], [--enable-gdb-compile])], - [enable_gdb_compile=yes]) + [enable_gdb_compile=default]) -if test "${enable_gdb_compile}" = yes; then +if test "${enable_gdb_compile}" = "default"; then + enable_gdb_compile=${enable_gdb_dwarf_support} + AC_MSG_WARN([Defaulting compile support to '${enable_gdb_dwarf_support}']) +fi + +if test "${enable_gdb_compile}" = "yes"; then + if test "${enable_gdb_dwarf_support}" = "no"; then + AC_MSG_ERROR([enabling gdb compile requires dwarf support]) + fi AC_DEFINE(HAVE_COMPILE, 1, [Define if compiling support to gdb compile.]) CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_GCC_COMPILE_OBS)" else @@ -1321,6 +1378,8 @@ AC_SUBST(SRCHIGH_CFLAGS) AC_HEADER_STDC AC_CHECK_HEADERS([ \ + IOKit/serial/ioss.h \ + asm/termios.h \ machine/reg.h \ nlist.h \ ptrace.h \ @@ -1914,32 +1973,87 @@ fi # Note that WIN32APILIBS is set by GDB_AC_COMMON. WIN32LIBS="$WIN32LIBS $WIN32APILIBS" +# Object files to be used when building with support for all file formats. +# This should not have elf or macho, as support for those formats depends +# on BFD enabling them as well. +all_binary_file_srcs="\$(dbx_SRCS) \$(mips_SRCS) \$(coff_SRCS) \$(xcoff_SRCS)" + +bfd_supports_elf=no # Add ELF support to GDB, but only if BFD includes ELF support. -GDB_AC_CHECK_BFD([for ELF support in BFD], gdb_cv_var_elf, +GDB_AC_CHECK_BFD([for ELF support in BFD], gdb_cv_var_bfd_elf, [bfd_get_elf_phdr_upper_bound (NULL)], elf-bfd.h) -if test "$gdb_cv_var_elf" = yes; then - CONFIG_OBS="$CONFIG_OBS elfread.o stap-probe.o dtrace-probe.o \ - gcore-elf.o elf-none-tdep.o" +if test "$gdb_cv_var_bfd_elf" = yes; then + CONFIG_OBS="$CONFIG_OBS gcore-elf.o elf-none-tdep.o" AC_DEFINE(HAVE_ELF, 1, [Define if ELF support should be included.]) - # -ldl is provided by bfd/Makfile.am (LIBDL) <PLUGINS>. + # -ldl is provided by bfd/Makefile.am (LIBDL) <PLUGINS>. if test "$plugins" = "yes"; then AC_SEARCH_LIBS(dlopen, dl) fi + bfd_supports_elf=yes + all_binary_file_srcs="$all_binary_file_srcs \$(elf_SRCS)" fi # Add macho support to GDB, but only if BFD includes it. -GDB_AC_CHECK_BFD([for Mach-O support in BFD], gdb_cv_var_macho, +bfd_supports_macho=no +GDB_AC_CHECK_BFD([for Mach-O support in BFD], gdb_cv_var_bfd_macho, [bfd_mach_o_lookup_command (NULL, 0, NULL)], mach-o.h) -if test "$gdb_cv_var_macho" = yes; then - CONFIG_OBS="$CONFIG_OBS machoread.o" +if test "$gdb_cv_var_bfd_macho" = yes; then + bfd_supports_macho=yes + all_binary_file_srcs="$all_binary_file_srcs \$(macho_SRCS)" +fi + +FORMAT_SRCS= + +if test "$enable_binary_file_formats" != "all"; then + # Formats that are required by some requested target(s). + # Warn users that they are added, so no one is surprised. + for req in $target_formats; do + case ,$enable_binary_file_formats, in + *,$req,*) + # Do nothing. + ;; + *) + AC_MSG_WARN("$req is required to support one or more requested targets. Adding it") + enable_binary_file_formats="${enable_binary_file_formats},$req" + ;; + esac + done + + AC_DEFINE_UNQUOTED(SUPPORTED_BINARY_FILE_FORMATS, "$enable_binary_file_formats", + Which binary file formats were requested at configure time. ) fi +enable_binary_file_formats=$(echo $enable_binary_file_formats | sed 's/,/ /g') + +# Go through all requested and required binary file formats to compile +# GDB, and double check that we can compile them. +for format in $enable_binary_file_formats +do + if test "$format" = "elf" && test "$bfd_supports_elf" != "yes"; then + AC_MSG_ERROR("elf support was requested, but BFD does not support it."); + elif test "$format" = "macho" && test "$bfd_supports_macho" != "yes"; then + AC_MSG_ERROR("Mach-O support was requested, but BFD does not support it."); + fi + + if test "$format" = "all"; then + FORMAT_SRCS="$all_binary_file_srcs" + # We don't break here in case the user requested Mach-O or ELF, but + # BFD is not configured to support it. If we were to break, we would + # silently drop the requested support instead of erroring out. + else + fmt=$(echo "$format _SRCS" | sed 's/ //') + FORMAT_SRCS="$FORMAT_SRCS \$($fmt)" + fi +done + +AC_SUBST(FORMAT_SRCS) + # Add any host-specific objects to GDB. CONFIG_OBS="${CONFIG_OBS} ${gdb_host_obs}" # If building on ELF, look for lzma support for embedded compressed debug info. -if test "$gdb_cv_var_elf" = yes; then +if test "$gdb_cv_var_bfd_elf" = yes; then AC_ARG_WITH(lzma, AS_HELP_STRING([--with-lzma], [support lzma compression (auto/yes/no)]), [], [with_lzma=auto]) diff --git a/gdb/configure.tgt b/gdb/configure.tgt index e9b3068..332f5b7 100644 --- a/gdb/configure.tgt +++ b/gdb/configure.tgt @@ -150,14 +150,15 @@ aarch64*-*-linux*) arch/aarch64-scalable-linux.o \ arch/arm.o arch/arm-linux.o arch/arm-get-next-pcs.o \ arm-tdep.o arm-linux-tdep.o \ - glibc-tdep.o linux-tdep.o solib-svr4.o svr4-tls-tdep.o \ + glibc-tdep.o linux-tdep.o solib-svr4.o \ + solib-svr4-linux.o svr4-tls-tdep.o \ symfile-mem.o linux-record.o" ;; alpha*-*-linux*) # Target: Little-endian Alpha running Linux gdb_target_obs="alpha-mdebug-tdep.o alpha-linux-tdep.o \ - linux-tdep.o solib-svr4.o" + linux-tdep.o solib-svr4.o solib-svr4-linux.o" ;; alpha*-*-netbsd* | alpha*-*-knetbsd*-gnu) # Target: NetBSD/alpha @@ -179,7 +180,7 @@ amdgcn*-*-*) am33_2.0*-*-linux*) # Target: Matsushita mn10300 (AM33) running Linux gdb_target_obs="mn10300-tdep.o mn10300-linux-tdep.o linux-tdep.o \ - solib-svr4.o" + solib-svr4.o solib-svr4-linux.o" ;; arc*-*-elf32) @@ -189,7 +190,8 @@ arc*-*-elf32) arc*-*-linux*) # Target: ARC machine running Linux - gdb_target_obs="arc-linux-tdep.o linux-tdep.o solib-svr4.o" + gdb_target_obs="arc-linux-tdep.o linux-tdep.o solib-svr4.o \ + solib-svr4-linux.o" ;; arm*-wince-pe | arm*-*-mingw32ce*) @@ -199,7 +201,8 @@ arm*-wince-pe | arm*-*-mingw32ce*) arm*-*-linux*) # Target: ARM based machine running GNU/Linux gdb_target_obs="arch/arm-linux.o arm-linux-tdep.o glibc-tdep.o \ - solib-svr4.o symfile-mem.o linux-tdep.o linux-record.o" + solib-svr4.o solib-svr4-linux.o symfile-mem.o \ + linux-tdep.o linux-record.o" ;; arm*-*-freebsd*) # Target: FreeBSD/arm @@ -239,13 +242,14 @@ bpf-*-*) cris*) # Target: CRIS - gdb_target_obs="cris-tdep.o cris-linux-tdep.o linux-tdep.o solib-svr4.o" + gdb_target_obs="cris-tdep.o cris-linux-tdep.o linux-tdep.o \ + solib-svr4.o solib-svr4-linux.o" ;; csky*-*-linux*) # Target: CSKY running GNU/Linux gdb_target_obs="csky-tdep.o csky-linux-tdep.o glibc-tdep.o \ - linux-tdep.o solib-svr4.o" + linux-tdep.o solib-svr4.o solib-svr4-linux.o" ;; csky*-*-*) @@ -270,7 +274,8 @@ h8300-*-*) hppa*-*-linux*) # Target: HP PA-RISC running Linux gdb_target_obs="hppa-linux-tdep.o glibc-tdep.o \ - linux-tdep.o solib-svr4.o symfile-mem.o" + linux-tdep.o solib-svr4.o solib-svr4-linux.o \ + symfile-mem.o" ;; hppa*-*-netbsd*) # Target: NetBSD/hppa @@ -315,7 +320,7 @@ i[34567]86-*-linux*) # Target: Intel 386 running GNU/Linux gdb_target_obs="i386-linux-tdep.o \ glibc-tdep.o \ - solib-svr4.o symfile-mem.o \ + solib-svr4.o solib-svr4-linux.o symfile-mem.o \ linux-tdep.o linux-record.o \ arch/i386-linux-tdesc.o \ arch/x86-linux-tdesc-features.o" @@ -345,7 +350,7 @@ i[34567]86-*-go32* | i[34567]86-*-msdosdjgpp*) ia64-*-linux*) # Target: Intel IA-64 running GNU/Linux gdb_target_obs="ia64-linux-tdep.o linux-tdep.o \ - solib-svr4.o symfile-mem.o" + solib-svr4.o solib-svr4-linux.o symfile-mem.o" ;; ia64-*-*vms*) # Target: Intel IA-64 running OpenVMS @@ -363,7 +368,8 @@ lm32-*-*) loongarch*-*-linux*) # Target: LoongArch running Linux gdb_target_obs="loongarch-linux-tdep.o glibc-tdep.o \ - linux-tdep.o solib-svr4.o linux-record.o" + linux-tdep.o solib-svr4.o solib-svr4-linux.o \ + linux-record.o" ;; m32c-*-*) @@ -374,8 +380,8 @@ m32c-*-*) m32r*-*-linux*) # Target: Renesas M32R running GNU/Linux gdb_target_obs="m32r-tdep.o m32r-linux-tdep.o \ - glibc-tdep.o solib-svr4.o symfile-mem.o \ - linux-tdep.o" + glibc-tdep.o solib-svr4.o solib-svr4-linux.o \ + symfile-mem.o linux-tdep.o" ;; m32r*-*-*) # Target: Renesas m32r processor @@ -395,7 +401,8 @@ fido-*-elf*) m68*-*-linux*) # Target: Motorola m68k with a.out and ELF gdb_target_obs="m68k-tdep.o m68k-linux-tdep.o solib-svr4.o \ - linux-tdep.o glibc-tdep.o symfile-mem.o" + solib-svr4-linux.o linux-tdep.o glibc-tdep.o \ + symfile-mem.o" ;; m68*-*-netbsd* | m68*-*-knetbsd*-gnu) # Target: NetBSD/m68k @@ -415,7 +422,7 @@ mep-*-*) microblaze*-linux-*|microblaze*-*-linux*) # Target: Xilinx MicroBlaze running Linux gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o solib-svr4.o \ - symfile-mem.o linux-tdep.o" + solib-svr4-linux.o symfile-mem.o linux-tdep.o" ;; microblaze*-*-*) # Target: Xilinx MicroBlaze running standalone @@ -425,7 +432,8 @@ microblaze*-*-*) mips*-*-linux*) # Target: Linux/MIPS gdb_target_obs="mips-tdep.o mips-linux-tdep.o glibc-tdep.o \ - solib-svr4.o symfile-mem.o linux-tdep.o" + solib-svr4.o solib-svr4-linux.o symfile-mem.o \ + linux-tdep.o" ;; mips*-*-netbsd* | mips*-*-knetbsd*-gnu) # Target: MIPS running NetBSD @@ -469,7 +477,8 @@ nds32*-*-elf) or1k*-*-linux*) # Target: OpenCores OpenRISC 1000 32-bit running Linux gdb_target_obs="or1k-tdep.o or1k-linux-tdep.o solib-svr4.o \ - symfile-mem.o glibc-tdep.o linux-tdep.o" + solib-svr4-linux.o symfile-mem.o glibc-tdep.o \ + linux-tdep.o" ;; or1k-*-* | or1knd-*-*) @@ -496,14 +505,15 @@ powerpc-*-openbsd*) ;; powerpc-*-aix* | rs6000-*-* | powerpc64-*-aix*) # Target: PowerPC running AIX - gdb_target_obs="rs6000-tdep.o rs6000-aix-tdep.o xcoffread.o \ + gdb_target_obs="rs6000-tdep.o rs6000-aix-tdep.o \ ppc-sysv-tdep.o solib-aix.o \ ravenscar-thread.o ppc-ravenscar-thread.o" ;; powerpc*-*-linux*) # Target: PowerPC running Linux gdb_target_obs="rs6000-tdep.o ppc-linux-tdep.o ppc-sysv-tdep.o \ - ppc64-tdep.o solib-svr4.o svr4-tls-tdep.o \ + ppc64-tdep.o solib-svr4.o solib-svr4-linux.o \ + svr4-tls-tdep.o \ glibc-tdep.o symfile-mem.o linux-tdep.o \ ravenscar-thread.o ppc-ravenscar-thread.o \ linux-record.o \ @@ -512,8 +522,8 @@ powerpc*-*-linux*) powerpc-*-lynx*178) # Target: PowerPC running Lynx178. gdb_target_obs="rs6000-tdep.o rs6000-lynx178-tdep.o \ - xcoffread.o ppc-sysv-tdep.o \ - ravenscar-thread.o ppc-ravenscar-thread.o" + ppc-sysv-tdep.o ravenscar-thread.o \ + ppc-ravenscar-thread.o" ;; powerpc*-*-*) # Target: PowerPC running eabi @@ -524,6 +534,7 @@ powerpc*-*-*) s390*-*-linux*) # Target: S390 running Linux gdb_target_obs="s390-linux-tdep.o s390-tdep.o solib-svr4.o \ + solib-svr4-linux.o \ linux-tdep.o linux-record.o symfile-mem.o \ svr4-tls-tdep.o" ;; @@ -536,7 +547,8 @@ riscv*-*-freebsd*) riscv*-*-linux*) # Target: Linux/RISC-V gdb_target_obs="riscv-linux-tdep.o riscv-canonicalize-syscall-gen.o \ - glibc-tdep.o linux-tdep.o solib-svr4.o symfile-mem.o \ + glibc-tdep.o linux-tdep.o solib-svr4.o solib-svr4-linux.o \ + symfile-mem.o \ linux-record.o svr4-tls-tdep.o" ;; @@ -558,7 +570,7 @@ rx-*-*) sh*-*-linux*) # Target: GNU/Linux Super-H gdb_target_obs="sh-tdep.o sh-linux-tdep.o \ - solib-svr4.o symfile-mem.o \ + solib-svr4.o solib-svr4-linux.o symfile-mem.o \ glibc-tdep.o linux-tdep.o" ;; sh*-*-netbsd* | sh*-*-knetbsd*-gnu) @@ -577,7 +589,8 @@ sh*) sparc-*-linux*) # Target: GNU/Linux SPARC gdb_target_obs="sparc-tdep.o \ - sparc-linux-tdep.o solib-svr4.o symfile-mem.o \ + sparc-linux-tdep.o solib-svr4.o solib-svr4-linux.o \ + symfile-mem.o \ linux-tdep.o \ ravenscar-thread.o sparc-ravenscar-thread.o" if test "x$have_64_bit_bfd" = "xyes"; then @@ -590,7 +603,8 @@ sparc64-*-linux*) # Target: GNU/Linux UltraSPARC gdb_target_obs="sparc64-tdep.o \ sparc64-linux-tdep.o sparc-tdep.o \ - sparc-linux-tdep.o solib-svr4.o linux-tdep.o \ + sparc-linux-tdep.o solib-svr4.o solib-svr4-linux.o \ + linux-tdep.o \ ravenscar-thread.o sparc-ravenscar-thread.o" ;; sparc*-*-freebsd* | sparc*-*-kfreebsd*-gnu) @@ -658,6 +672,7 @@ tic6x-*-*) tilegx-*-linux*) # Target: TILE-Gx gdb_target_obs="tilegx-tdep.o tilegx-linux-tdep.o solib-svr4.o \ + solib-svr4-linux.o \ symfile-mem.o glibc-tdep.o linux-tdep.o" ;; @@ -708,7 +723,8 @@ x86_64-*-linux*) # Target: GNU/Linux x86-64 gdb_target_obs="amd64-linux-tdep.o ${i386_tobjs} \ i386-linux-tdep.o glibc-tdep.o svr4-tls-tdep.o \ - solib-svr4.o symfile-mem.o linux-tdep.o linux-record.o \ + solib-svr4.o solib-svr4-linux.o symfile-mem.o \ + linux-tdep.o linux-record.o \ arch/i386-linux-tdesc.o arch/amd64-linux-tdesc.o \ arch/x86-linux-tdesc-features.o" ;; @@ -819,3 +835,17 @@ for t in x ${gdb_target_obs}; do gdb_have_gcore=true fi done + +# Decide which file formats are absolutely required based on +# the requested targets. Warn later that they are added, in +# case the user didn't manually request them, or all readers. +# It's fine to add the same format multiple times since the +# loop that reads the options to FORMAT_OBS will ensure that +# they are only added once. +for i in $gdb_target_obs; do + case "${i}" in + *"windows-tdep.o" ) target_formats="${target_formats} coff";; + "rs6000-aix-tdep.o" ) target_formats="${target_formats} xcoff";; + "rs6000-lynx178-tdep.o" ) target_formats="${target_formats} xcoff";; + esac +done diff --git a/gdb/contrib/ari/create-web-ari-in-src.sh b/gdb/contrib/ari/create-web-ari-in-src.sh index 4ea0398..b479ce5 100644 --- a/gdb/contrib/ari/create-web-ari-in-src.sh +++ b/gdb/contrib/ari/create-web-ari-in-src.sh @@ -50,7 +50,7 @@ if [ -z "${tempdir}" ] ; then fi fi -# Default location of generate index.hmtl web page. +# Default location of generated index.html web page. if [ -z "${webdir}" ] ; then # Use 'branch' subdir name if Tag contains branch if [ -f "${srcdir}/gdb/CVS/Tag" ] ; then diff --git a/gdb/contrib/ari/gdb_ari.sh b/gdb/contrib/ari/gdb_ari.sh index f539ed1..e10bbe0 100755 --- a/gdb/contrib/ari/gdb_ari.sh +++ b/gdb/contrib/ari/gdb_ari.sh @@ -60,7 +60,7 @@ Options: -Werror Treat all problems as errors. -Wall Report all problems. -Wari Report problems that should be fixed in new code. - -WCATEGORY Report problems in the specifed category. The category + -WCATEGORY Report problems in the specified category. The category can be prefixed with "no-". Valid categories are: ${all} EOF @@ -159,7 +159,7 @@ BEGIN { PWD = "'`pwd`'" } -# Print the error message for BUG. Append SUPLEMENT if non-empty. +# Print the error message for BUG. Append SUPPLEMENT if non-empty. function print_bug(file,line,prefix,category,bug,doc,supplement, suffix,idx) { if (print_idx) { idx = bug ": " diff --git a/gdb/contrib/ari/update-web-ari.sh b/gdb/contrib/ari/update-web-ari.sh index 6e7b5ff..b9ef184 100644 --- a/gdb/contrib/ari/update-web-ari.sh +++ b/gdb/contrib/ari/update-web-ari.sh @@ -176,7 +176,7 @@ fi # THIS HAS SUFFERED BIT ROT if ${check_indent_p} && test -d "${srcdir}" then - printf "Analizing file indentation:" 1>&2 + printf "Analyzing file indentation:" 1>&2 ( cd "${srcdir}" && /bin/sh ${aridir}/gdb_find.sh ${project} | while read f do if /bin/sh ${aridir}/gdb_indent.sh < ${f} 2>/dev/null | cmp -s - ${f} @@ -550,7 +550,7 @@ function print_heading (nb_file, where, bug_i) { for (bug_i = 1; bug_i <= nr_bug; bug_i++) { bug = i2bug[bug_i]; printf "<th>" - # The title names are offset by one. Otherwize, when the browser + # The title names are offset by one. Otherwise, when the browser # jumps to the name it leaves out half the relevant column. #printf "<a name=\",%s\"> </a>", bug printf "<a name=\",%s\"> </a>", i2bug[bug_i-1] @@ -851,7 +851,7 @@ EOF print_toc 0 -1 deprecate Deprecate <<EOF Mechanisms that are a candidate for being made obsolete. Once core GDB no longer depends on these mechanisms and/or there is a -replacement available, these mechanims can be deprecated (adding the +replacement available, these mechanisms can be deprecated (adding the deprecated prefix) obsoleted (put into category obsolete) or deleted. See obsolete and deprecated. EOF diff --git a/gdb/contrib/codespell-dictionary.txt b/gdb/contrib/codespell-dictionary.txt new file mode 100644 index 0000000..09bc309 --- /dev/null +++ b/gdb/contrib/codespell-dictionary.txt @@ -0,0 +1 @@ +gdbsever->gdbserver diff --git a/gdb/contrib/codespell-ignore-words.txt b/gdb/contrib/codespell-ignore-words.txt index 2d6e13a..881b1d2 100644 --- a/gdb/contrib/codespell-ignore-words.txt +++ b/gdb/contrib/codespell-ignore-words.txt @@ -1,2 +1,3 @@ configury SME +Synopsys diff --git a/gdb/contrib/setup.cfg b/gdb/contrib/setup.cfg index d6be386..5541a01 100644 --- a/gdb/contrib/setup.cfg +++ b/gdb/contrib/setup.cfg @@ -4,6 +4,7 @@ skip = */ChangeLog*,*/configure,gdbsupport/Makefile.in,*.dat,*.eps,gdb/features/*.c,gdb/ada-casefold.h,gdb/copying.c,gdb/gdbarch-gen.h,gdb/gdbarch-gen.c,gdb/target-delegates-gen.c ignore-words = gdb/contrib/codespell-ignore-words.txt +dictionary = gdb/contrib/codespell-dictionary.txt,- # Ignore all URLs. uri-ignore-words-list = * diff --git a/gdb/copying.c b/gdb/copying.c index af465e5..a198030 100644 --- a/gdb/copying.c +++ b/gdb/copying.c @@ -639,9 +639,7 @@ show_warranty_command (const char *ignore, int from_tty) gdb_printf ("\n"); } -void _initialize_copying (); -void -_initialize_copying () +INIT_GDB_FILE (copying) { add_cmd ("copying", no_set_class, show_copying_command, _("Conditions for redistributing copies of GDB."), diff --git a/gdb/corefile.c b/gdb/corefile.c index 9f27f14..a2c75c0 100644 --- a/gdb/corefile.c +++ b/gdb/corefile.c @@ -391,9 +391,7 @@ set_gnutarget (const char *newtarget) set_gnutarget_command (NULL, 0, NULL); } -void _initialize_core (); -void -_initialize_core () +INIT_GDB_FILE (core) { cmd_list_element *core_file_cmd = add_cmd ("core-file", class_files, core_file_command, _("\ diff --git a/gdb/corelow.c b/gdb/corelow.c index 4518781..a74cb05 100644 --- a/gdb/corelow.c +++ b/gdb/corelow.c @@ -37,7 +37,6 @@ #include "exec.h" #include "readline/tilde.h" #include "solib.h" -#include "solist.h" #include "filenames.h" #include "progspace.h" #include "objfiles.h" @@ -452,11 +451,8 @@ core_target::build_file_mappings () const bfd_build_id *core_build_id = build_id_bfd_get (current_program_space->core_bfd ()); - for (const auto &iter : mapped_files) + for (const auto &[filename, file_data] : mapped_files) { - const std::string &filename = iter.first; - const mapped_file &file_data = iter.second; - /* If this mapped file has the same build-id as was discovered for the core-file itself, then we assume this is the main executable. Record the filename as we can use this later. */ @@ -957,7 +953,7 @@ locate_exec_from_corefile_exec_context (bfd *cbfd, execbfd = open_and_check_build_id (exec_name); else { - std::string p = (ldirname (bfd_get_filename (cbfd)) + std::string p = (gdb_ldirname (bfd_get_filename (cbfd)) + '/' + exec_name); execbfd = open_and_check_build_id (p.c_str ()); @@ -971,7 +967,7 @@ locate_exec_from_corefile_exec_context (bfd *cbfd, if (execbfd == nullptr) { const char *base_name = lbasename (exec_name); - std::string p = (ldirname (bfd_get_filename (cbfd)) + std::string p = (gdb_ldirname (bfd_get_filename (cbfd)) + '/' + base_name); execbfd = open_and_check_build_id (p.c_str ()); @@ -1181,7 +1177,7 @@ core_target_open (const char *arg, int from_tty) if (current_program_space->exec_bfd () == nullptr) set_gdbarch_from_file (current_program_space->core_bfd ()); - post_create_inferior (from_tty); + post_create_inferior (from_tty, true); /* Now go through the target stack looking for threads since there may be a thread_stratum target loaded on top of target core by @@ -2158,9 +2154,7 @@ core_target_find_mapped_file (const char *filename, return targ->lookup_mapped_file_info (filename, addr); } -void _initialize_corelow (); -void -_initialize_corelow () +INIT_GDB_FILE (corelow) { add_target (core_target_info, core_target_open, filename_maybe_quoted_completer); diff --git a/gdb/cp-abi.c b/gdb/cp-abi.c index 8f2067b..d8cfc08 100644 --- a/gdb/cp-abi.c +++ b/gdb/cp-abi.c @@ -384,9 +384,7 @@ show_cp_abi_cmd (const char *args, int from_tty) uiout->text (").\n"); } -void _initialize_cp_abi (); -void -_initialize_cp_abi () +INIT_GDB_FILE (cp_abi) { struct cmd_list_element *c; diff --git a/gdb/cp-name-parser.y b/gdb/cp-name-parser.y index d4ab98c..cafd6b2 100644 --- a/gdb/cp-name-parser.y +++ b/gdb/cp-name-parser.y @@ -374,6 +374,22 @@ function | colon_ext_only function_arglist start_opt { $$ = state->fill_comp (DEMANGLE_COMPONENT_TYPED_NAME, $1, $2.comp); if ($3) $$ = state->fill_comp (DEMANGLE_COMPONENT_LOCAL_NAME, $$, $3); } + | colon_ext_only + { + /* This production is a hack to handle + something like "name::operator new[]" -- + without arguments, this ordinarily would + not parse, but canonicalizing it is + important. So we infer the "()" and then + remove it when converting back to string. + Note that this works because this + production is terminal. */ + demangle_component *comp + = state->fill_comp (DEMANGLE_COMPONENT_FUNCTION_TYPE, + nullptr, nullptr); + $$ = state->fill_comp (DEMANGLE_COMPONENT_TYPED_NAME, $1, comp); + state->demangle_info->added_parens = true; + } | conversion_op_name start_opt { $$ = $1.comp; @@ -2111,13 +2127,17 @@ canonicalize_tests () should_be_the_same ("Foozle<int>::fogey<Empty<int> > (Empty<int>)", "Foozle<int>::fogey<Empty<int>> (Empty<int>)"); + + should_be_the_same ("something :: operator new [ ]", + "something::operator new[]"); + should_be_the_same ("something :: operator new", + "something::operator new"); + should_be_the_same ("operator()", "operator ()"); } #endif -void _initialize_cp_name_parser (); -void -_initialize_cp_name_parser () +INIT_GDB_FILE (cp_name_parser) { #if GDB_SELF_TEST selftests::register_test ("canonicalize", canonicalize_tests); diff --git a/gdb/cp-namespace.c b/gdb/cp-namespace.c index d285e86..009ea4b 100644 --- a/gdb/cp-namespace.c +++ b/gdb/cp-namespace.c @@ -1049,9 +1049,7 @@ maintenance_cplus_namespace (const char *args, int from_tty) gdb_printf (_("The `maint namespace' command was removed.\n")); } -void _initialize_cp_namespace (); -void -_initialize_cp_namespace () +INIT_GDB_FILE (cp_namespace) { struct cmd_list_element *cmd; diff --git a/gdb/cp-support.c b/gdb/cp-support.c index c71b8d9..8f5c0d1 100644 --- a/gdb/cp-support.c +++ b/gdb/cp-support.c @@ -573,6 +573,17 @@ replace_typedefs (struct demangle_parse_info *info, } } +/* A helper to strip a trailing "()" from PTR. The string is modified + in place. */ + +static void +maybe_strip_parens (char *ptr) +{ + size_t len = strlen (ptr); + if (len > 2 && ptr[len - 2] == '(' && ptr[len - 1] == ')') + ptr[len - 2] = '\0'; +} + /* Parse STRING and convert it to canonical form, resolving any typedefs. If parsing fails, or if STRING is already canonical, return nullptr. Otherwise return the canonical form. If @@ -599,6 +610,9 @@ cp_canonicalize_string_full (const char *string, estimated_len); gdb_assert (us); + if (info->added_parens) + maybe_strip_parens (us.get ()); + /* Finally, compare the original string with the computed name, returning NULL if they are the same. */ if (strcmp (us.get (), string) == 0) @@ -647,6 +661,9 @@ cp_canonicalize_string (const char *string) return nullptr; } + if (info->added_parens) + maybe_strip_parens (us.get ()); + if (strcmp (us.get (), string) == 0) return nullptr; @@ -1501,7 +1518,7 @@ cp_lookup_rtti_type (const char *name, const struct block *block) return NULL; } - if (rtti_sym->aclass () != LOC_TYPEDEF) + if (rtti_sym->loc_class () != LOC_TYPEDEF) { warning (_("RTTI symbol for class '%s' is not a type"), name); return NULL; @@ -2370,9 +2387,7 @@ find_toplevel_char (const char *s, char c) return 0; } -void _initialize_cp_support (); -void -_initialize_cp_support () +INIT_GDB_FILE (cp_support) { cmd_list_element *maintenance_cplus = add_basic_prefix_cmd ("cplus", class_maintenance, diff --git a/gdb/cp-support.h b/gdb/cp-support.h index 3ed354c..ffe0ba1 100644 --- a/gdb/cp-support.h +++ b/gdb/cp-support.h @@ -63,6 +63,10 @@ struct demangle_parse_info /* Any memory used during processing. */ auto_obstack obstack; + /* True if the parser had to add a dummy '()' at the end of the + input text to make it parse. */ + bool added_parens = false; + /* Any other objects referred to by this object, and whose storage lifetime must be linked. */ std::vector<std::unique_ptr<demangle_parse_info>> infos; diff --git a/gdb/cp-valprint.c b/gdb/cp-valprint.c index 2117718..252072b 100644 --- a/gdb/cp-valprint.c +++ b/gdb/cp-valprint.c @@ -797,9 +797,7 @@ test_print_fields (gdbarch *arch) #endif -void _initialize_cp_valprint (); -void -_initialize_cp_valprint () +INIT_GDB_FILE (cp_valprint) { #if GDB_SELF_TEST selftests::register_test_foreach_arch ("print-fields", test_print_fields); diff --git a/gdb/cris-linux-tdep.c b/gdb/cris-linux-tdep.c index b2ac80d..a39441e 100644 --- a/gdb/cris-linux-tdep.c +++ b/gdb/cris-linux-tdep.c @@ -23,6 +23,7 @@ #include "osabi.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "solib-svr4.h" #include "symtab.h" #include "gdbarch.h" @@ -41,14 +42,10 @@ cris_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_fetch_tls_load_module_address (gdbarch, svr4_fetch_objfile_link_map); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_ilp32_fetch_link_map_offsets); - + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); } -void _initialize_cris_linux_tdep (); -void -_initialize_cris_linux_tdep () +INIT_GDB_FILE (cris_linux_tdep) { gdbarch_register_osabi (bfd_arch_cris, 0, GDB_OSABI_LINUX, cris_linux_init_abi); diff --git a/gdb/cris-tdep.c b/gdb/cris-tdep.c index 722c0a4..9cfc1eb 100644 --- a/gdb/cris-tdep.c +++ b/gdb/cris-tdep.c @@ -3816,9 +3816,7 @@ static void cris_iterate_over_regset_sections (struct gdbarch *gdbarch, &cris_regset, NULL, cb_data); } -void _initialize_cris_tdep (); -void -_initialize_cris_tdep () +INIT_GDB_FILE (cris_tdep) { gdbarch_register (bfd_arch_cris, cris_gdbarch_init, cris_dump_tdep); @@ -3995,7 +3993,7 @@ cris_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_cannot_store_register (gdbarch, cris_cannot_store_register); set_gdbarch_cannot_fetch_register (gdbarch, cris_cannot_fetch_register); - set_gdbarch_software_single_step (gdbarch, cris_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, cris_software_single_step); break; case 32: diff --git a/gdb/csky-linux-tdep.c b/gdb/csky-linux-tdep.c index 2afb358..0651645 100644 --- a/gdb/csky-linux-tdep.c +++ b/gdb/csky-linux-tdep.c @@ -22,6 +22,7 @@ #include "osabi.h" #include "glibc-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "gdbarch.h" #include "solib-svr4.h" #include "regset.h" @@ -407,8 +408,7 @@ csky_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Shared library handling. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); /* Enable TLS support. */ set_gdbarch_fetch_tls_load_module_address (gdbarch, @@ -426,9 +426,7 @@ csky_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) &csky_linux_rt_sigreturn_tramp_frame_kernel_4x); } -void _initialize_csky_linux_tdep (); -void -_initialize_csky_linux_tdep () +INIT_GDB_FILE (csky_linux_tdep) { gdbarch_register_osabi (bfd_arch_csky, 0, GDB_OSABI_LINUX, csky_linux_init_abi); diff --git a/gdb/csky-tdep.c b/gdb/csky-tdep.c index 350612f..e6c6e2c 100644 --- a/gdb/csky-tdep.c +++ b/gdb/csky-tdep.c @@ -2882,9 +2882,7 @@ csky_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_csky_tdep (); -void -_initialize_csky_tdep () +INIT_GDB_FILE (csky_tdep) { gdbarch_register (bfd_arch_csky, csky_gdbarch_init); diff --git a/gdb/ctfread.c b/gdb/ctfread.c index e568f15..76de16c 100644 --- a/gdb/ctfread.c +++ b/gdb/ctfread.c @@ -328,7 +328,7 @@ set_symbol_address (struct objfile *of, struct symbol *sym, const char *name) if (msym.minsym != NULL) { sym->set_value_address (msym.value_address ()); - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); sym->set_section_index (msym.minsym->section_index ()); } } @@ -447,7 +447,7 @@ ctf_add_enum_member_cb (const char *name, int enum_value, void *arg) sym->set_language (language_c, &ccp->of->objfile_obstack); sym->compute_and_set_names (name, false, ccp->of->per_bfd); - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); sym->set_domain (VAR_DOMAIN); sym->set_type (fip->ptype); add_symbol_to_list (sym, ccp->builder->get_global_symbols ()); @@ -477,7 +477,7 @@ new_symbol (struct ctf_context *ccp, struct type *type, ctf_id_t tid) sym->set_language (language_c, &objfile->objfile_obstack); sym->compute_and_set_names (name, false, objfile->per_bfd); sym->set_domain (VAR_DOMAIN); - sym->set_aclass_index (LOC_OPTIMIZED_OUT); + sym->set_loc_class_index (LOC_OPTIMIZED_OUT); if (type != nullptr) sym->set_type (type); @@ -488,11 +488,11 @@ new_symbol (struct ctf_context *ccp, struct type *type, ctf_id_t tid) case CTF_K_STRUCT: case CTF_K_UNION: case CTF_K_ENUM: - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_domain (STRUCT_DOMAIN); break; case CTF_K_FUNCTION: - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); set_symbol_address (objfile, sym, sym->linkage_name ()); break; case CTF_K_CONST: @@ -502,7 +502,7 @@ new_symbol (struct ctf_context *ccp, struct type *type, ctf_id_t tid) case CTF_K_TYPEDEF: case CTF_K_INTEGER: case CTF_K_FLOAT: - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_domain (TYPE_DOMAIN); break; case CTF_K_POINTER: @@ -1169,7 +1169,7 @@ ctf_add_var_cb (const char *name, ctf_id_t id, void *arg) OBJSTAT (ccp->of, n_syms++); sym->set_type (type); sym->set_domain (VAR_DOMAIN); - sym->set_aclass_index (LOC_OPTIMIZED_OUT); + sym->set_loc_class_index (LOC_OPTIMIZED_OUT); sym->compute_and_set_names (name, false, ccp->of->per_bfd); add_symbol_to_list (sym, ccp->builder->get_file_symbols ()); break; @@ -1205,7 +1205,7 @@ add_stt_entries (struct ctf_context *ccp, int functions) OBJSTAT (ccp->of, n_syms++); sym->set_type (type); sym->set_domain (VAR_DOMAIN); - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); sym->compute_and_set_names (tname, false, ccp->of->per_bfd); add_symbol_to_list (sym, ccp->builder->get_global_symbols ()); set_symbol_address (ccp->of, sym, tname); @@ -1309,7 +1309,7 @@ ctf_psymtab_add_stt_entries (ctf_dict_t *cfp, ctf_psymtab *pst, while ((tid = ctf_symbol_next (cfp, &i, &tname, functions)) != CTF_ERR) { uint32_t kind = ctf_type_kind (cfp, tid); - address_class aclass; + location_class loc_class; domain_enum tdomain; switch (kind) { @@ -1324,14 +1324,14 @@ ctf_psymtab_add_stt_entries (ctf_dict_t *cfp, ctf_psymtab *pst, } if (kind == CTF_K_FUNCTION) - aclass = LOC_STATIC; + loc_class = LOC_STATIC; else if (kind == CTF_K_CONST) - aclass = LOC_CONST; + loc_class = LOC_CONST; else - aclass = LOC_TYPEDEF; + loc_class = LOC_TYPEDEF; pst->add_psymbol (tname, true, - tdomain, aclass, -1, + tdomain, loc_class, -1, psymbol_placement::GLOBAL, unrelocated_addr (0), language_c, pst->context.partial_symtabs, of); @@ -1465,7 +1465,7 @@ ctf_psymtab_type_cb (ctf_id_t tid, void *arg) ccp = (struct ctf_context *) arg; domain_enum domain = UNDEF_DOMAIN; - enum address_class aclass = LOC_UNDEF; + location_class loc_class = LOC_UNDEF; kind = ctf_type_kind (ccp->fp, tid); switch (kind) { @@ -1475,29 +1475,29 @@ ctf_psymtab_type_cb (ctf_id_t tid, void *arg) case CTF_K_STRUCT: case CTF_K_UNION: domain = STRUCT_DOMAIN; - aclass = LOC_TYPEDEF; + loc_class = LOC_TYPEDEF; break; case CTF_K_FUNCTION: case CTF_K_FORWARD: domain = VAR_DOMAIN; - aclass = LOC_STATIC; + loc_class = LOC_STATIC; section = SECT_OFF_TEXT (ccp->of); break; case CTF_K_CONST: domain = VAR_DOMAIN; - aclass = LOC_STATIC; + loc_class = LOC_STATIC; break; case CTF_K_TYPEDEF: case CTF_K_POINTER: case CTF_K_VOLATILE: case CTF_K_RESTRICT: domain = VAR_DOMAIN; - aclass = LOC_TYPEDEF; + loc_class = LOC_TYPEDEF; break; case CTF_K_INTEGER: case CTF_K_FLOAT: domain = VAR_DOMAIN; - aclass = LOC_TYPEDEF; + loc_class = LOC_TYPEDEF; break; case CTF_K_ARRAY: case CTF_K_UNKNOWN: @@ -1509,7 +1509,7 @@ ctf_psymtab_type_cb (ctf_id_t tid, void *arg) return 0; ccp->pst->add_psymbol (name, false, - domain, aclass, section, + domain, loc_class, section, psymbol_placement::STATIC, unrelocated_addr (0), language_c, ccp->partial_symtabs, ccp->of); diff --git a/gdb/d-exp.y b/gdb/d-exp.y index e0ee758..f77b15e 100644 --- a/gdb/d-exp.y +++ b/gdb/d-exp.y @@ -444,7 +444,7 @@ PrimaryExpression: sym = lookup_symbol (copy.c_str (), pstate->expression_context_block, SEARCH_VFT, &is_a_field_of_this); - if (sym.symbol && sym.symbol->aclass () != LOC_TYPEDEF) + if (sym.symbol && sym.symbol->loc_class () != LOC_TYPEDEF) { if (symbol_read_needs_frame (sym.symbol)) pstate->block_tracker->update (sym); @@ -1334,7 +1334,7 @@ classify_name (struct parser_state *par_state, const struct block *block) std::string copy = copy_name (yylval.sval); sym = lookup_symbol (copy.c_str (), block, SEARCH_VFT, &is_a_field_of_this); - if (sym.symbol && sym.symbol->aclass () == LOC_TYPEDEF) + if (sym.symbol && sym.symbol->loc_class () == LOC_TYPEDEF) { yylval.tsym.type = sym.symbol->type (); return TYPENAME; @@ -1383,7 +1383,7 @@ classify_inner_name (struct parser_state *par_state, if (yylval.ssym.sym.symbol == NULL) return ERROR; - if (yylval.ssym.sym.symbol->aclass () == LOC_TYPEDEF) + if (yylval.ssym.sym.symbol->loc_class () == LOC_TYPEDEF) { yylval.tsym.type = yylval.ssym.sym.symbol->type (); return TYPENAME; diff --git a/gdb/darwin-nat-info.c b/gdb/darwin-nat-info.c index b5784be..3ec49af 100644 --- a/gdb/darwin-nat-info.c +++ b/gdb/darwin-nat-info.c @@ -839,9 +839,7 @@ info_mach_exceptions_command (const char *args, int from_tty) } } -void _initialize_darwin_info_commands (); -void -_initialize_darwin_info_commands () +INIT_GDB_FILE (darwin_info_commands) { add_info ("mach-tasks", info_mach_tasks_command, _("Get list of tasks in system.")); diff --git a/gdb/darwin-nat.c b/gdb/darwin-nat.c index 6bc0e4f..7acf639 100644 --- a/gdb/darwin-nat.c +++ b/gdb/darwin-nat.c @@ -1853,7 +1853,7 @@ copy_shell_to_cache (const char *shell, const std::string &new_name) error (_("Could not open shell (%s) for reading: %s"), shell, safe_strerror (errno)); - std::string new_dir = ldirname (new_name.c_str ()); + std::string new_dir = gdb_ldirname (new_name.c_str ()); if (!mkdir_recursive (new_dir.c_str ())) error (_("Could not make cache directory \"%s\": %s"), new_dir.c_str (), safe_strerror (errno)); @@ -2469,9 +2469,7 @@ darwin_nat_target::supports_multi_process () return true; } -void _initialize_darwin_nat (); -void -_initialize_darwin_nat () +INIT_GDB_FILE (darwin_nat) { kern_return_t kret; diff --git a/gdb/dbxread.c b/gdb/dbxread.c index 8d0ebab..260f583 100644 --- a/gdb/dbxread.c +++ b/gdb/dbxread.c @@ -248,9 +248,7 @@ static const struct sym_fns aout_sym_fns = NULL, /* sym_probe_fns */ }; -void _initialize_dbxread (); -void -_initialize_dbxread () +INIT_GDB_FILE (dbxread) { add_symtab_fns (bfd_target_aout_flavour, &aout_sym_fns); } diff --git a/gdb/dcache.c b/gdb/dcache.c index 2c5484d..7a15278 100644 --- a/gdb/dcache.c +++ b/gdb/dcache.c @@ -679,9 +679,7 @@ set_dcache_line_size (const char *args, int from_tty, target_dcache_invalidate (current_program_space->aspace); } -void _initialize_dcache (); -void -_initialize_dcache () +INIT_GDB_FILE (dcache) { add_setshow_boolean_cmd ("remotecache", class_support, &dcache_enabled_p, _("\ diff --git a/gdb/debuginfod-support.c b/gdb/debuginfod-support.c index d573b8d..e99c13b 100644 --- a/gdb/debuginfod-support.c +++ b/gdb/debuginfod-support.c @@ -18,6 +18,7 @@ #include "diagnostics.h" #include <errno.h> +#include "gdbsupport/cleanups.h" #include "gdbsupport/scoped_fd.h" #include "debuginfod-support.h" #include <optional> @@ -594,9 +595,7 @@ maint_get_debuginfod_download_sections () /* Register debuginfod commands. */ -void _initialize_debuginfod (); -void -_initialize_debuginfod () +INIT_GDB_FILE (debuginfod) { /* set/show debuginfod */ add_setshow_prefix_cmd ("debuginfod", class_run, @@ -190,8 +190,6 @@ extern std::string relocate_gdb_directory (const char *initial, bool relocatable /* From top.c */ -typedef void initialize_file_ftype (void); - extern char *gdb_readline_wrapper (const char *); extern const char *command_line_input (std::string &cmd_line_buffer, @@ -407,4 +405,10 @@ DEF_ENUM_FLAGS_TYPE (enum user_selected_what_flag, user_selected_what); #include "utils.h" +/* File initialization macro. This is found by make-init-c and used + to construct the gdb initialization function. */ +#define INIT_GDB_FILE(NAME) \ + extern void _initialize_ ## NAME (); \ + void _initialize_ ## NAME () + #endif /* GDB_DEFS_H */ diff --git a/gdb/dicos-tdep.c b/gdb/dicos-tdep.c index 4dfac76..d6bc9a5 100644 --- a/gdb/dicos-tdep.c +++ b/gdb/dicos-tdep.c @@ -27,7 +27,7 @@ void dicos_init_abi (struct gdbarch *gdbarch) { - set_gdbarch_so_ops (gdbarch, &solib_target_so_ops); + set_gdbarch_make_solib_ops (gdbarch, make_target_solib_ops); /* Every process, although has its own address space, sees the same list of shared libraries. There's no "main executable" in DICOS, diff --git a/gdb/dictionary.c b/gdb/dictionary.c index 91dafd1..28e900d 100644 --- a/gdb/dictionary.c +++ b/gdb/dictionary.c @@ -952,14 +952,9 @@ mdict_create_hashed (struct obstack *obstack, retval->n_allocated_dictionaries = nsyms.size (); int idx = 0; - for (const auto &pair : nsyms) - { - enum language language = pair.first; - std::vector<symbol *> symlist = pair.second; - - retval->dictionaries[idx++] - = dict_create_hashed (obstack, language, symlist); - } + for (const auto &[language, symlist] : nsyms) + retval->dictionaries[idx++] = dict_create_hashed (obstack, language, + symlist); return retval; } @@ -997,14 +992,9 @@ mdict_create_linear (struct obstack *obstack, retval->n_allocated_dictionaries = nsyms.size (); int idx = 0; - for (const auto &pair : nsyms) - { - enum language language = pair.first; - std::vector<symbol *> symlist = pair.second; - - retval->dictionaries[idx++] - = dict_create_linear (obstack, language, symlist); - } + for (const auto &[language, symlist] : nsyms) + retval->dictionaries[idx++] = dict_create_linear (obstack, language, + symlist); return retval; } @@ -1135,10 +1125,8 @@ mdict_add_pending (struct multidictionary *mdict, gdb::unordered_map<enum language, std::vector<symbol *>> nsyms = collate_pending_symbols_by_language (symbol_list); - for (const auto &pair : nsyms) + for (const auto &[language, symlist] : nsyms) { - enum language language = pair.first; - std::vector<symbol *> symlist = pair.second; struct dictionary *dict = find_language_dictionary (mdict, language); if (dict == nullptr) diff --git a/gdb/disasm-selftests.c b/gdb/disasm-selftests.c index 3ccc174..0d06065 100644 --- a/gdb/disasm-selftests.c +++ b/gdb/disasm-selftests.c @@ -418,9 +418,7 @@ disassemble_insn (gdbarch *gdbarch, gdb::byte_vector &insn, } /* namespace selftests */ -void _initialize_disasm_selftests (); -void -_initialize_disasm_selftests () +INIT_GDB_FILE (disasm_selftests) { selftests::register_test_foreach_arch ("print_one_insn", selftests::print_one_insn_test); diff --git a/gdb/disasm.c b/gdb/disasm.c index 2a7a80c..b731192 100644 --- a/gdb/disasm.c +++ b/gdb/disasm.c @@ -1470,9 +1470,7 @@ disassembler_options_completer (struct cmd_list_element *ignore, /* Initialization code. */ -void _initialize_disasm (); -void -_initialize_disasm () +INIT_GDB_FILE (disasm) { /* Add the command that controls the disassembler options. */ set_show_commands set_show_disas_opts diff --git a/gdb/displaced-stepping.c b/gdb/displaced-stepping.c index 7df45d6..6699296 100644 --- a/gdb/displaced-stepping.c +++ b/gdb/displaced-stepping.c @@ -315,9 +315,7 @@ displaced_step_buffers::restore_in_ptid (ptid_t ptid) } } -void _initialize_displaced_stepping (); -void -_initialize_displaced_stepping () +INIT_GDB_FILE (displaced_stepping) { add_setshow_boolean_cmd ("displaced", class_maintenance, &debug_displaced, _("\ diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index b9fc160..d4a5a63 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -3807,7 +3807,7 @@ Thread 1 "main" received signal SIGINT, Interrupt. @table @code @anchor{info_threads} @kindex info threads -@item info threads @r{[}-gid@r{]} @r{[}@var{thread-id-list}@r{]} +@item info threads @r{[}-gid@r{]} @r{[}-stopped@r{]} @r{[}-running@r{]} @r{[}@var{thread-id-list}@r{]} Display information about one or more threads. With no arguments displays information about all threads. You can specify the list of @@ -3857,6 +3857,14 @@ If you're debugging multiple inferiors, @value{GDBN} displays thread IDs using the qualified @var{inferior-num}.@var{thread-num} format. Otherwise, only @var{thread-num} is shown. +If you specify the @samp{-stopped} option, @value{GDBN} filters the +output of the command to print the stopped threads only. Similarly, +if you specify the @samp{-running} option, @value{GDBN} filters the +output to print the running threads only. These options can be +helpful to reduce the output list if there is a large number of +threads. If you specify both options, @value{GDBN} prints both +stopped and running threads. + If you specify the @samp{-gid} option, @value{GDBN} displays a column indicating each thread's global thread ID: @@ -13098,15 +13106,15 @@ environment variable. @vindex $_active_linker_namespaces@r{, convenience variable} @item $_active_linker_namespaces -Number of active linkage namespaces in the inferior. In systems with no -support for linkage namespaces, this variable will always be set to @samp{1}. +Number of active linker namespaces in the inferior (@pxref{Files}). In systems +with no support for linker namespaces, this variable will always be set to +@samp{1}. -@vindex $_current_linker_namespace@r{, convenience variable} -@item $_current_linker_namespace -The namespace which contains the current location in the inferior. This -returns GDB's internal identifier for namespaces, which is @samp{[[@var{n}]]} -where @var{n} is a zero-based namespace number. In systems with no support -for linkage namespaces, this variable will always be set to @samp{[[0]]}. +@vindex $_linker_namespace@r{, convenience variable} +@item $_linker_namespace +The namespace which contains the current location in the inferior. This returns +@value{GDBN}'s internal numbering for the namespace. In systems with no support +for linker namespaces, this variable will always be set to @samp{0}. @end table @@ -22234,11 +22242,18 @@ be determined then the address range for the @code{.text} section from the library will be listed. If the @code{.text} section cannot be found then no addresses will be listed. -On systems that support linkage namespaces, the output includes an +On systems that support linker namespaces, the output includes an additional column @code{NS} if the inferior has more than one active -namespace when the command is used. This column the linkage namespace +namespace when the command is used. This column the linker namespace that the shared library was loaded into. +@cindex linker namespaces +@dfn{Linker namespaces} are a feature of some standard libraries, that allow +shared objects to be loaded in isolated environment, eliminating the +possibility that those objects may cross-talk. Each set of isolated +shared objects is said to belong to a ``namespace'', and linker related +actions such as relocations do not cross namespace boundaries. + @kindex info dll @item info dll @var{regex} This is an alias of @code{info sharedlibrary}. @@ -24767,6 +24782,10 @@ future connections is shown. The available settings are: @tab @code{vFile:stat} @tab Host I/O +@item @code{hostio-lstat-packet} +@tab @code{vFile:lstat} +@tab Host I/O + @item @code{hostio-setfs-packet} @tab @code{vFile:setfs} @tab Host I/O @@ -26630,8 +26649,9 @@ Show whether AArch64 debugging messages are displayed. @end table -@subsubsection AArch64 SVE. -@cindex AArch64 SVE. +@subsubsection AArch64 Scalable Vector Extension +@cindex Scalable Vector Extension, AArch64 +@cindex SVE, AArch64 When @value{GDBN} is debugging the AArch64 architecture, if the Scalable Vector Extension (SVE) is present, then @value{GDBN} will provide the vector registers @@ -26670,11 +26690,10 @@ internally by @value{GDBN} and the Linux Kernel. @end itemize -@subsubsection AArch64 SME. +@subsubsection AArch64 Scalable Matrix Extension @anchor{AArch64 SME} -@cindex SME -@cindex AArch64 SME -@cindex Scalable Matrix Extension +@cindex Scalable Matrix Extension, AArch64 +@cindex SME, AArch64 The Scalable Matrix Extension (@url{https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/scalable-matrix-extension-armv9-a-architecture, @acronym{SME}}) is an AArch64 architecture extension that expands on the concept of the @@ -26866,11 +26885,10 @@ incorrect values for SVE registers (when in streaming mode). This is the same limitation we have for the @acronym{SVE} registers, and there are plans to address this limitation going forward. -@subsubsection AArch64 SME2. +@subsubsection AArch64 Scalable Matrix Extension 2 @anchor{AArch64 SME2} -@cindex SME2 -@cindex AArch64 SME2 -@cindex Scalable Matrix Extension 2 +@cindex Scalable Matrix Extension 2, AArch64 +@cindex SME2, AArch64 The Scalable Matrix Extension 2 is an AArch64 architecture extension that further expands the @acronym{SME} extension with the following: @@ -26910,8 +26928,9 @@ For more information about @acronym{SME2}, please refer to the official @url{https://developer.arm.com/documentation/ddi0487/latest, architecture documentation}. -@subsubsection AArch64 Pointer Authentication. -@cindex AArch64 Pointer Authentication. +@subsubsection AArch64 Pointer Authentication +@cindex Pointer Authentication, AArch64 +@cindex PAC, AArch64 @anchor{AArch64 PAC} When @value{GDBN} is debugging the AArch64 architecture, and the program is @@ -26921,8 +26940,9 @@ When GDB prints a backtrace, any addresses that required unmasking will be postfixed with the marker [PAC]. When using the MI, this is printed as part of the @code{addr_flags} field. -@subsubsection AArch64 Memory Tagging Extension. -@cindex AArch64 Memory Tagging Extension. +@subsubsection AArch64 Memory Tagging Extension +@cindex Memory Tagging Extension, AArch64 +@cindex MTE, AArch64 When @value{GDBN} is debugging the AArch64 architecture, the program is using the v8.5-A feature Memory Tagging Extension (MTE) and there is support @@ -27639,6 +27659,16 @@ or a prompt that does not. @item set prompt @var{newprompt} Directs @value{GDBN} to use @var{newprompt} as its prompt string henceforth. +For example, this will set a blue-colored ``(gdb)'' prompt: + +@smallexample +set prompt \001\033[0;34m\002(gdb)\001\033[0m\002 +@end smallexample + +It uses @samp{\001} and @samp{\002} to begin and end a sequence of +non-printing characters, to make sure they're not counted in the string +length. + @kindex show prompt @item show prompt Prints a line of the form: @samp{Gdb's prompt is: @var{your-prompt}} @@ -28000,6 +28030,10 @@ is used. Otherwise, if @value{GDBN} was configured with Python scripting support, and if the Python Pygments package is available, then it will be used. +@item show style sources +Show the current state of source code styling. + +@anchor{warning-prefix} @item set style warning-prefix @itemx show style warning-prefix @itemx set style error-prefix @@ -28011,9 +28045,6 @@ emoji display, and so the prefixes are only displayed if emoji styling is enabled. The defaults are the warning sign emoji for warnings, and and the cross mark emoji for errors. -@item show style sources -Show the current state of source code styling. - @item set style tui-current-position @samp{on|off} Enable or disable styling of the source and assembly code highlighted by the TUI's current position indicator. The default is @samp{off}. @@ -31316,138 +31347,13 @@ appropriate @code{set style} commands. @xref{Output Styling}. @cindex Emacs @cindex @sc{gnu} Emacs -A special interface allows you to use @sc{gnu} Emacs to view (and -edit) the source files for the program you are debugging with -@value{GDBN}. - -To use this interface, use the command @kbd{M-x gdb} in Emacs. Give the -executable file you want to debug as an argument. This command starts -@value{GDBN} as a subprocess of Emacs, with input and output through a newly -created Emacs buffer. -@c (Do not use the @code{-tui} option to run @value{GDBN} from Emacs.) - -Running @value{GDBN} under Emacs can be just like running @value{GDBN} normally except for two -things: - -@itemize @bullet -@item -All ``terminal'' input and output goes through an Emacs buffer, called -the GUD buffer. - -This applies both to @value{GDBN} commands and their output, and to the input -and output done by the program you are debugging. - -This is useful because it means that you can copy the text of previous -commands and input them again; you can even use parts of the output -in this way. - -All the facilities of Emacs' Shell mode are available for interacting -with your program. In particular, you can send signals the usual -way---for example, @kbd{C-c C-c} for an interrupt, @kbd{C-c C-z} for a -stop. - -@item -@value{GDBN} displays source code through Emacs. - -Each time @value{GDBN} displays a stack frame, Emacs automatically finds the -source file for that frame and puts an arrow (@samp{=>}) at the -left margin of the current line. Emacs uses a separate buffer for -source display, and splits the screen to show both your @value{GDBN} session -and the source. - -Explicit @value{GDBN} @code{list} or search commands still produce output as -usual, but you probably have no reason to use them from Emacs. -@end itemize - -We call this @dfn{text command mode}. Emacs 22.1, and later, also uses -a graphical mode, enabled by default, which provides further buffers -that can control the execution and describe the state of your program. -@xref{GDB Graphical Interface,,, Emacs, The @sc{gnu} Emacs Manual}. - -If you specify an absolute file name when prompted for the @kbd{M-x -gdb} argument, then Emacs sets your current working directory to where -your program resides. If you only specify the file name, then Emacs -sets your current working directory to the directory associated -with the previous buffer. In this case, @value{GDBN} may find your -program by searching your environment's @env{PATH} variable, but on -some operating systems it might not find the source. So, although the -@value{GDBN} input and output session proceeds normally, the auxiliary -buffer does not display the current source and line of execution. - -The initial working directory of @value{GDBN} is printed on the top -line of the GUD buffer and this serves as a default for the commands -that specify files for @value{GDBN} to operate on. @xref{Files, -,Commands to Specify Files}. - -By default, @kbd{M-x gdb} calls the program called @file{gdb}. If you -need to call @value{GDBN} by a different name (for example, if you -keep several configurations around, with different names) you can -customize the Emacs variable @code{gud-gdb-command-name} to run the -one you want. - -In the GUD buffer, you can use these special Emacs commands in -addition to the standard Shell mode commands: - -@table @kbd -@item C-h m -Describe the features of Emacs' GUD Mode. - -@item C-c C-s -Execute to another source line, like the @value{GDBN} @code{step} command; also -update the display window to show the current file and location. - -@item C-c C-n -Execute to next source line in this function, skipping all function -calls, like the @value{GDBN} @code{next} command. Then update the display window -to show the current file and location. - -@item C-c C-i -Execute one instruction, like the @value{GDBN} @code{stepi} command; update -display window accordingly. - -@item C-c C-f -Execute until exit from the selected stack frame, like the @value{GDBN} -@code{finish} command. - -@item C-c C-r -Continue execution of your program, like the @value{GDBN} @code{continue} -command. -@item C-c < -Go up the number of frames indicated by the numeric argument -(@pxref{Arguments, , Numeric Arguments, Emacs, The @sc{gnu} Emacs Manual}), -like the @value{GDBN} @code{up} command. +In @sc{gnu} Emacs there is a special interface to @value{GDBN}, which +facilitates viewing the source code for the program you are debugging. +There is also an IDE-like interface to GDB, with specialized buffers for +breakpoints, stack frames and other aspects of the debugger state. -@item C-c > -Go down the number of frames indicated by the numeric argument, like the -@value{GDBN} @code{down} command. -@end table - -In any source file, the Emacs command @kbd{C-x @key{SPC}} (@code{gud-break}) -tells @value{GDBN} to set a breakpoint on the source line point is on. - -In text command mode, if you type @kbd{M-x speedbar}, Emacs displays a -separate frame which shows a backtrace when the GUD buffer is current. -Move point to any frame in the stack and type @key{RET} to make it -become the current frame and display the associated source in the -source buffer. Alternatively, click @kbd{Mouse-2} to make the -selected frame become the current one. In graphical mode, the -speedbar displays watch expressions. - -If you accidentally delete the source-display buffer, an easy way to get -it back is to type the command @code{f} in the @value{GDBN} buffer, to -request a frame display; when you run under Emacs, this recreates -the source buffer if necessary to show you the context of the current -frame. - -The source files displayed in Emacs are in ordinary Emacs buffers -which are visiting the source files in the usual way. You can edit -the files with these buffers if you wish; but keep in mind that @value{GDBN} -communicates with Emacs in terms of line numbers. If you add or -delete lines from the text, the line numbers that @value{GDBN} knows cease -to correspond properly with the code. - -A more detailed description of Emacs' interaction with @value{GDBN} is +A detailed description of Emacs' interaction with @value{GDBN} is given in the Emacs manual (@pxref{Debuggers,,, Emacs, The @sc{gnu} Emacs Manual}). @@ -41371,6 +41277,14 @@ Configure @value{GDBN} for cross-debugging programs running on the specified list of targets. The special value @samp{all} configures @value{GDBN} for debugging programs running on any target it supports. +@item --enable-binary-file-formats=@r{[}@var{format}@r{]}@dots{} +@itemx --enable-binary-file-formats=all +Configure @value{GDBN} to support certain binary file formats. If a +format is the main (or only) file format for a given target, the +configure script may add support to it anyway, and warn the user. +If not given, all file formats that @value{GDBN} supports are compiled +in. + @item --with-gdb-datadir=@var{path} Set the @value{GDBN}-specific data directory. @value{GDBN} will look here for certain supporting files or scripts. This defaults to the @@ -41458,7 +41372,7 @@ libpython is present and found at configure time.) Python makes @value{GDBN} scripting much more powerful than the restricted CLI scripting language. If your host does not have Python installed, you can find it on @url{http://www.python.org/download/}. The oldest version -of Python supported by GDB is 3.0.1. The optional argument @var{python} +of Python supported by GDB is 3.4. The optional argument @var{python} is used to find the Python headers and libraries. It can be either the name of a Python executable, or the name of the directory in which Python is installed. @@ -42859,6 +42773,23 @@ reports and error and the command is aborted. @item show watchdog Show the current setting of the target wait timeout. + +@kindex maint set console-translation-mode +@kindex maint show console-translation-mode +@item maint set console-translation-mode @r{[}binary|text@r{]} +@itemx maint show console-translation-mode +Controls the translation mode of @value{GDBN} stdout/stderr. MS-Windows +only. Useful for running the @value{GDBN} testsuite. + +The translation mode values are as follows: +@table @code +@item binary +No translation. +@item text +Translate @samp{\n} (LF, a single Line Feed) into @samp{\r\n} (CR-LF, a +Carriage Return-Line Feed combination). +@end table + @end table @node Remote Protocol @@ -46835,12 +46766,28 @@ If an error occurs the return value is -1. The format of the returned binary attachment is as described in @ref{struct stat}. @item vFile:stat: @var{filename} -Get information about the file @var{filename} on the target. -On success the information is returned as a binary attachment -and the return value is the size of this attachment in bytes. -If an error occurs the return value is -1. The format of the +Get information about the file @var{filename} on the target as if from +a @samp{stat} call. On success the information is returned as a binary +attachment and the return value is the size of this attachment in +bytes. If an error occurs the return value is -1. The format of the returned binary attachment is as described in @ref{struct stat}. +If @var{filename} is a symbolic link, then the information returned is +about the file the link refers to, this is inline with the @samp{stat} +library call. + +@item vFile:lstat: @var{filename} +Get information about the file @var{filename} on the target as if from +an @samp{lstat} call. On success the information is returned as a +binary attachment and the return value is the size of this attachment +in bytes. If an error occurs the return value is -1. The format of +the returned binary attachment is as described in @ref{struct stat}. + +This packet is identical to @samp{vFile:stat}, except if +@var{filename} is a symbolic link, then this packet returns +information about the link itself, not the file that the link refers +to, this is inline with the @samp{lstat} library call. + @item vFile:unlink: @var{filename} Delete the file at @var{filename} on the target. Return 0, or -1 if an error occurs. The @var{filename} is a string. @@ -49308,6 +49255,7 @@ registers using the capitalization used in the description. @menu * AArch64 Features:: +* Alpha Features:: * ARC Features:: * ARM Features:: * i386 Features:: @@ -49614,6 +49562,47 @@ of bytes. Extra registers are allowed in this feature, but they will not affect @value{GDBN}. +@node Alpha Features +@subsection Alpha Features +@cindex target descriptions, Alpha Features + +The @samp{org.gnu.gdb.alpha.core} feature is required for Alpha targets. It +must contain the following 64-bit registers; note that @value{GDBN} uses the +software names for Alpha registers: + +@itemize @minus +@item +@samp{v0}: function return value +@item +@samp{t0} through @samp{t12}: temporary registers +@item +@samp{s0} through @samp{s5}: saved registers +@item +@samp{fp}: frame pointer +@item +@samp{a0} through @samp{a5}: argument registers +@item +@samp{ra}: return address +@item +@samp{at}: assembler temporary register +@item +@samp{gp}: global pointer +@item +@samp{sp}: stack pointer +@item +@samp{zero}: always zero +@item +@samp{f0} through @samp{f30}: floating-point registers +@item +@samp{fpcr}: floating-point control register +@item +@samp{pc}: program counter +@item +@samp{}: an anonymous register for historical purpose +@item +@samp{unique}: PALcode memory slot +@end itemize + @node ARC Features @subsection ARC Features @cindex target descriptions, ARC Features diff --git a/gdb/doc/guile.texi b/gdb/doc/guile.texi index c6d889f..9677229 100644 --- a/gdb/doc/guile.texi +++ b/gdb/doc/guile.texi @@ -1772,6 +1772,16 @@ invoking it interactively. If this function throws an exception, it is turned into a @value{GDBN} @code{error} call. Otherwise, the return value is ignored. +For non-prefix commands, @var{invoke} is required. For prefix +commands @var{invoke} is optional. Only prefix commands that need to +handle unknown sub-commands should supply @var{invoke}. + +For prefix commands that don't supply @var{invoke}, if the prefix +command is used without a sub-command name then @value{GDBN} will +display the help text for every sub-command, unless the prefix command +is a @kbd{show} sub-command, in which case @value{GDBN} will list the +values of all sub-commands. + The argument @var{command-class} is one of the @samp{COMMAND_} constants defined below. This argument tells @value{GDBN} how to categorize the new command in the help system. The default is @code{COMMAND_NONE}. @@ -2098,8 +2108,10 @@ is the @code{<gdb:parameter>} object representing the parameter, and This function must return a string, and will be displayed to the user. @value{GDBN} will add a trailing newline. -The argument @var{doc} is the help text for the new parameter. -If there is no documentation string, a default value is used. +The argument @var{doc} is the help text for the new parameter. If +there is no documentation string, a default value is used. If the +documentation string is empty, then @value{GDBN} will print just the +@var{set-doc} and @var{show-doc} strings (see below). The argument @var{set-doc} is the help text for this parameter's @code{set} command. diff --git a/gdb/doc/python.texi b/gdb/doc/python.texi index 7bb6503..6fa2285 100644 --- a/gdb/doc/python.texi +++ b/gdb/doc/python.texi @@ -479,7 +479,7 @@ call this function and will automatically direct the output to the relevant stream. @end defun -@defun gdb.flush (@r{[}, stream@r{]}) +@defun gdb.flush (@r{[}stream@r{]}) Flush the buffer of a @value{GDBN} paginated stream so that the contents are displayed immediately. @value{GDBN} will flush the contents of a stream automatically when it encounters a newline in the @@ -509,6 +509,17 @@ Flushing @code{sys.stdout} or @code{sys.stderr} will automatically call this function for the relevant stream. @end defun +@defun gdb.warning (text) +Print a warning message to @value{GDBN}'s standard output stream. The +warning message is the warning prefix (@pxref{warning-prefix}), the +string @w{@samp{warning: }}, and then @var{text}, which must be a +non-empty string. + +Due to the warning prefix, @var{text} should not begin with a capital +letter (except for proper nouns), and @var{text} should end with a +period. +@end defun + @defun gdb.target_charset () Return the name of the current target character set (@pxref{Character Sets}). This differs from @code{gdb.parameter('target-charset')} in @@ -4525,6 +4536,7 @@ You can implement new @value{GDBN} CLI commands in Python. A CLI command is implemented using an instance of the @code{gdb.Command} class, most commonly using a subclass. +@anchor{Command.__init__} @defun Command.__init__ (name, command_class @r{[}, completer_class @r{[}, prefix@r{]]}) The object initializer for @code{Command} registers the new command with @value{GDBN}. This initializer is normally invoked from the @@ -4558,6 +4570,7 @@ documentation string is provided, the default value @samp{This command is not documented.} is used. @end defun +@anchor{Command.dont_repeat} @cindex don't repeat Python command @defun Command.dont_repeat () By default, a @value{GDBN} command is repeated when the user enters a @@ -4568,6 +4581,7 @@ exception). This is similar to the user command @code{dont-repeat}, see @ref{Define, dont-repeat}. @end defun +@anchor{Command.invoke} @defun Command.invoke (argument, from_tty) This method is called by @value{GDBN} when this command is invoked. @@ -4581,6 +4595,17 @@ that the command came from elsewhere. If this method throws an exception, it is turned into a @value{GDBN} @code{error} call. Otherwise, the return value is ignored. +For non-prefix commands (@pxref{Command.__init__}), the @code{invoke} +method is required. For prefix commands the @code{invoke} method is +optional. Only prefix commands that need to handle unknown +sub-commands should implement the @code{invoke} method. + +For prefix commands that don't implement @code{invoke}, if the prefix +command is used without a sub-command name then @value{GDBN} will +display the help text for every sub-command, unless the prefix command +is a @kbd{show} sub-command, in which case @value{GDBN} will list the +values of all sub-commands. + @findex gdb.string_to_argv To break @var{argument} up into an argv-like string use @code{gdb.string_to_argv}. This function behaves identically to @@ -5079,7 +5104,9 @@ string from the parameter's class, if there is one. If there is no documentation string, a default value is used. The documentation string is included in the output of the parameters @code{help set} and @code{help show} commands, and should be written taking this into -account. +account. If the documentation string for the parameter's class is the +empty string then @value{GDBN} will only use @code{Parameter.set_doc} +or @code{Parameter.show_doc} (see below) in the @kbd{help} output. @end defun @defvar Parameter.set_doc @@ -5258,6 +5285,99 @@ constants provided when the parameter is created. The value is @code{gdb.Color} instance. @end table +When creating multiple new parameters using @code{gdb.Parameter}, it +is often desirable to create a prefix command that can be used to +group related parameters together, for example, if you wished to add +the parameters @kbd{plugin-name feature-1} and @kbd{plugin-name +feature-2}, then the @kbd{plugin-name} would need to be a prefix +command (@pxref{CLI Commands In Python}). + +However, when creating parameters, you will almost always need to +create two prefix commands, one as a @kbd{set} sub-command, and one as +a @kbd{show} sub-command. @value{GDBN} provides the +@code{gdb.ParameterPrefix} helper class to make creation of these two +prefixes easier. + +@defun ParameterPrefix.__init__ (name, command_class, doc = @code{None}) +The object initializer for @code{ParameterPrefix} registers two new +@code{gdb.Command} prefixes, one as a @kbd{set} sub-command, and the +other as a @kbd{show} sub-command. + +@var{name}, a string, is the name of the new prefix, without either +@kbd{set} or @kbd{show}, similar to the @var{name} passed to +@code{gdb.Parameter} (@pxref{Parameters In Python}). For example, to +create the prefixes @kbd{set plugin-name} and @kbd{show plugin-name}, +you would pass the string @kbd{plugin-name}. + +@var{command_class} should be one of the @samp{COMMAND_} constants +(@pxref{CLI Commands In Python}). This argument tells @value{GDBN} how to +categorize the new parameter prefixes in the help system. + +There are a number of ways in which the help text for the two new +prefix commands can be provided. If the @var{doc} parameter is not +@code{None}, then this will be used as the documentation string for +both prefix commands. + +If @var{doc} is @code{None}, but @code{gdb.ParameterPrefix} has been +sub-classed, then the prefix command documentation will be taken from +sub-classes documentation string (i.e., the @code{__doc__} attribute). + +If @var{doc} is @code{None}, and there is no @code{__doc__} string, +then the default value @samp{This command is not documented.} is used. + +When writing the help text, keep in mind that the same text is used +for both the @kbd{set} and @kbd{show} prefix commands. +@end defun + +@defun ParameterPrefix.invoke_set (argument, from_tty) +If a sub-class defines this method, then @value{GDBN} will call this +when the prefix command is used with an unknown sub-command. The +@var{argument} and @var{from_tty} parameters are the same as for +@code{gdb.Command.invoke} (@pxref{Command.invoke}). + +If this method throws an exception, it is turned into a @value{GDBN} +@code{error} call. Otherwise, the return value is ignored. + +It is not required that a @code{ParameterPrefix} sub-class override +this method. Usually, a parameter prefix only exists as a means to +group related parameters together. @value{GDBN} handles this use case +automatically with no need to implement @code{invoke_set}. +@end defun + +@defun ParameterPrefix.invoke_show (argument, from_tty) +This is like the @code{invoke_set} method, but for the @kbd{show} +prefix command. As with @code{invoke_set}, implementation of this +method is optional, and usually not required. +@end defun + +@cindex don't repeat Python command +@defun ParameterPrefix.dont_repeat () +Like @code{Command.dont_repeat} (@pxref{Command.dont_repeat}), this +can be called from @code{ParameterPrefix.invoke_set} or +@code{ParameterPrefix.invoke_show} to prevent the prefix commands from +being repeated. +@end defun + +Here is a small example that uses @code{gdb.ParameterPrefix} along +with @code{gdb.Parameter} to create two new parameters +@kbd{plugin-name feature-1} and @kbd{plugin-name feature-2}. As +neither @code{invoke_set} or @code{invoke_show} is needed, this +example does not sub-class @code{gdb.ParameterPrefix}: + +@smallexample +class ExampleParam(gdb.Parameter): + def __init__ (self, name): + super ().__init__ (name, gdb.COMMAND_DATA, gdb.PARAM_BOOLEAN) + self.value = True + +gdb.ParameterPrefix("plugin-name", gdb.COMMAND_NONE, + """An example parameter prefix. + + This groups together some parameters.""") +ExampleParam("plugin-name feature-1") +ExampleParam("plugin-name feature-2") +@end smallexample + @node Functions In Python @subsubsection Writing new convenience functions diff --git a/gdb/dtrace-probe.c b/gdb/dtrace-probe.c index fa60c34..c663571 100644 --- a/gdb/dtrace-probe.c +++ b/gdb/dtrace-probe.c @@ -889,9 +889,7 @@ info_probes_dtrace_command (const char *arg, int from_tty) info_probes_for_spops (arg, from_tty, &dtrace_static_probe_ops); } -void _initialize_dtrace_probe (); -void -_initialize_dtrace_probe () +INIT_GDB_FILE (dtrace_probe) { all_static_probe_ops.push_back (&dtrace_static_probe_ops); diff --git a/gdb/dummy-frame.c b/gdb/dummy-frame.c index f8440b3..445a7b4 100644 --- a/gdb/dummy-frame.c +++ b/gdb/dummy-frame.c @@ -425,9 +425,7 @@ maintenance_print_dummy_frames (const char *args, int from_tty) } } -void _initialize_dummy_frame (); -void -_initialize_dummy_frame () +INIT_GDB_FILE (dummy_frame) { add_cmd ("dummy-frames", class_maintenance, maintenance_print_dummy_frames, _("Print the contents of the internal dummy-frame stack."), diff --git a/gdb/dwarf2/ada-imported.c b/gdb/dwarf2/ada-imported.c index 1e25966..48e6fcc 100644 --- a/gdb/dwarf2/ada-imported.c +++ b/gdb/dwarf2/ada-imported.c @@ -109,7 +109,7 @@ ada_alias_get_block_value (const struct symbol *sym) if (real_symbol.symbol == nullptr) error (_("could not find alias '%s' for function '%s'"), name, sym->print_name ()); - if (real_symbol.symbol->aclass () != LOC_BLOCK) + if (real_symbol.symbol->loc_class () != LOC_BLOCK) error (_("alias '%s' for function '%s' is not a function"), name, sym->print_name ()); diff --git a/gdb/dwarf2/attribute.c b/gdb/dwarf2/attribute.c index 8ff0353..d2b5364 100644 --- a/gdb/dwarf2/attribute.c +++ b/gdb/dwarf2/attribute.c @@ -216,6 +216,22 @@ attribute::signed_constant () const /* See attribute.h. */ +std::optional<LONGEST> +attribute::confused_constant () const +{ + if (form_is_strictly_signed ()) + return u.snd; + else if (form_is_constant ()) + return u.unsnd; + + /* For DW_FORM_data16 see attribute::form_is_constant. */ + complaint (_("Attribute value is not a constant (%s)"), + dwarf_form_name (form)); + return {}; +} + +/* See attribute.h. */ + bool attribute::form_is_unsigned () const { diff --git a/gdb/dwarf2/attribute.h b/gdb/dwarf2/attribute.h index 31ff018..234de4e 100644 --- a/gdb/dwarf2/attribute.h +++ b/gdb/dwarf2/attribute.h @@ -123,6 +123,25 @@ struct attribute empty value is returned. */ std::optional<LONGEST> signed_constant () const; + /* Return a signed constant value. However, for narrow forms like + DW_FORM_data1, sign extension is not done. + + DWARF advises compilers to generally use DW_FORM_[su]data to + avoid ambiguity. However, both GCC and LLVM ignore this for + certain attributes. Furthermore in DWARF, whether a narrower + form causes sign-extension depends on the attribute -- for + attributes that can only assume non-negative values, sign + extension is not done. + + Unfortunately, both compilers also emit certain attributes in a + "confused" way, using DW_FORM_sdata for signed values, and + possibly choosing a narrow form (e.g., DW_FORM_data1) otherwise + -- assuming that sign-extension will not be done. + + This method should only be called when this "confused" treatment + is necessary. */ + std::optional<LONGEST> confused_constant () const; + /* Return non-zero if ATTR's value falls in the 'constant' class, or zero otherwise. When this function returns true, you can apply the constant_value method to it. diff --git a/gdb/dwarf2/call-site.h b/gdb/dwarf2/call-site.h index e02cc5e..2cc4883 100644 --- a/gdb/dwarf2/call-site.h +++ b/gdb/dwarf2/call-site.h @@ -198,7 +198,7 @@ struct call_site struct call_site *tail_call_next = nullptr; /* * Describe DW_AT_call_target. Missing attribute uses - FIELD_LOC_KIND_DWARF_BLOCK with FIELD_DWARF_BLOCK == NULL. */ + m_loc_kind == DWARF_BLOCK with m_loc.dwarf_block == nullptr. */ struct call_site_target target {}; diff --git a/gdb/dwarf2/cooked-index-entry.c b/gdb/dwarf2/cooked-index-entry.c index 52db851..863ddd6 100644 --- a/gdb/dwarf2/cooked-index-entry.c +++ b/gdb/dwarf2/cooked-index-entry.c @@ -33,6 +33,7 @@ to_string (cooked_index_flag flags) MAP_ENUM_FLAG (IS_LINKAGE), MAP_ENUM_FLAG (IS_TYPE_DECLARATION), MAP_ENUM_FLAG (IS_PARENT_DEFERRED), + MAP_ENUM_FLAG (IS_SYNTHESIZED), }; return flags.to_string (mapping); @@ -233,8 +234,7 @@ cooked_index_entry::write_scope (struct obstack *storage, obstack_grow (storage, sep, strlen (sep)); } -void _initialize_dwarf2_entry (); -void _initialize_dwarf2_entry () +INIT_GDB_FILE (dwarf2_entry) { #if GDB_SELF_TEST selftests::register_test ("cooked_index_entry::compare", test_compare); diff --git a/gdb/dwarf2/cooked-index-worker.c b/gdb/dwarf2/cooked-index-worker.c index 5d7fc46..09d80ef 100644 --- a/gdb/dwarf2/cooked-index-worker.c +++ b/gdb/dwarf2/cooked-index-worker.c @@ -246,7 +246,7 @@ void cooked_index_worker::done_reading () { { - scoped_time_it time_it ("DWARF add parent map"); + scoped_time_it time_it ("DWARF add parent map", m_per_command_time); for (auto &one_result : m_results) m_all_parents_map.add_map (*one_result.get_parent_map ()); diff --git a/gdb/dwarf2/cooked-index-worker.h b/gdb/dwarf2/cooked-index-worker.h index df5c31d..8b9766c 100644 --- a/gdb/dwarf2/cooked-index-worker.h +++ b/gdb/dwarf2/cooked-index-worker.h @@ -25,6 +25,8 @@ #include "dwarf2/cooked-index-shard.h" #include "dwarf2/types.h" #include "dwarf2/read.h" +#include "maint.h" +#include "run-on-main-thread.h" #if CXX_STD_THREAD #include <mutex> @@ -107,11 +109,20 @@ public: return &m_parent_map; } - /* Add an exception to the list of exceptions caught while reading. - These are passed forward and printed by the main thread. */ - void note_error (gdb_exception &&except) + /* Catch exceptions from calling F (), and add them to the list of caught + exceptions. These are passed forward and printed by the main thread. */ + template <typename F> + void + catch_error (F &&f) { - m_exceptions.push_back (std::move (except)); + try + { + f (); + } + catch (gdb_exception &ex) + { + m_exceptions.push_back (std::move (ex)); + } } /* Called when the thread using this object is done with its work. @@ -207,8 +218,12 @@ public: explicit cooked_index_worker (dwarf2_per_objfile *per_objfile) : m_per_objfile (per_objfile), - m_cache_store (global_index_cache, per_objfile->per_bfd) - { } + m_cache_store (global_index_cache, per_objfile->per_bfd), + m_per_command_time (per_command_time) + { + /* Make sure we capture per_command_time from the main thread. */ + gdb_assert (is_main_thread ()); + } virtual ~cooked_index_worker () { } DISABLE_COPY_AND_ASSIGN (cooked_index_worker); @@ -298,6 +313,9 @@ protected: std::optional<gdb_exception> m_failed; /* An object used to write to the index cache. */ index_cache_store_context m_cache_store; + + /* Captured value of per_command_time. */ + bool m_per_command_time; }; using cooked_index_worker_up = std::unique_ptr<cooked_index_worker>; diff --git a/gdb/dwarf2/cooked-index.c b/gdb/dwarf2/cooked-index.c index 2c7e31e..6209590 100644 --- a/gdb/dwarf2/cooked-index.c +++ b/gdb/dwarf2/cooked-index.c @@ -104,7 +104,8 @@ cooked_index::set_contents () const parent_map_map *parent_maps = m_state->get_parent_map_map (); finalizers.add_task ([=] () { - scoped_time_it time_it ("DWARF finalize worker"); + scoped_time_it time_it ("DWARF finalize worker", + m_state->m_per_command_time); this_shard->finalize (parent_maps); }); } @@ -326,9 +327,7 @@ maintenance_wait_for_index_cache (const char *args, int from_tty) wait_for_index_cache (0); } -void _initialize_cooked_index (); -void -_initialize_cooked_index () +INIT_GDB_FILE (cooked_index) { add_cmd ("wait-for-index-cache", class_maintenance, maintenance_wait_for_index_cache, _("\ diff --git a/gdb/dwarf2/cooked-indexer.c b/gdb/dwarf2/cooked-indexer.c index c093984..d4557c45 100644 --- a/gdb/dwarf2/cooked-indexer.c +++ b/gdb/dwarf2/cooked-indexer.c @@ -83,19 +83,17 @@ tag_can_have_linkage_name (enum dwarf_tag tag) cutu_reader * cooked_indexer::ensure_cu_exists (cutu_reader *reader, - sect_offset sect_off, bool is_dwz, + const section_and_offset §_off, bool for_scanning) { /* Lookups for type unit references are always in the CU, and cross-CU references will crash. */ - if (reader->cu ()->per_cu->is_dwz == is_dwz - && reader->cu ()->header.offset_in_unit_p (sect_off)) + if (reader->section () == sect_off.section + && reader->cu ()->header.offset_in_unit_p (sect_off.offset)) return reader; dwarf2_per_objfile *per_objfile = reader->cu ()->per_objfile; - dwarf2_per_cu *per_cu - = dwarf2_find_containing_comp_unit (sect_off, is_dwz, - per_objfile->per_bfd); + dwarf2_per_cu *per_cu = dwarf2_find_containing_unit (sect_off, per_objfile); /* When scanning, we only want to visit a given CU a single time. Doing this check here avoids self-imports as well. */ @@ -148,10 +146,8 @@ cooked_indexer::scan_attributes (dwarf2_per_cu *scanning_per_cu, bool *is_enum_class, bool for_specification) { - bool origin_is_dwz = false; bool is_declaration = false; - sect_offset origin_offset {}; - + std::optional<section_and_offset> origin; std::optional<unrelocated_addr> low_pc; std::optional<unrelocated_addr> high_pc; bool high_pc_relative = false; @@ -221,8 +217,8 @@ cooked_indexer::scan_attributes (dwarf2_per_cu *scanning_per_cu, case DW_AT_specification: case DW_AT_abstract_origin: case DW_AT_extension: - origin_offset = attr.get_ref_die_offset (); - origin_is_dwz = attr.form_is_alt (); + origin = { &get_section_for_ref (attr, reader->cu ()), + attr.get_ref_die_offset () }; break; case DW_AT_external: @@ -311,19 +307,19 @@ cooked_indexer::scan_attributes (dwarf2_per_cu *scanning_per_cu, || (*linkage_name == nullptr && tag_can_have_linkage_name (abbrev->tag)) || (*parent_entry == nullptr && m_language != language_c)) - && origin_offset != sect_offset (0)) + && origin.has_value ()) { cutu_reader *new_reader - = ensure_cu_exists (reader, origin_offset, origin_is_dwz, false); + = ensure_cu_exists (reader, *origin, false); if (new_reader == nullptr) error (_(DWARF_ERROR_PREFIX "cannot follow reference to DIE at %s" " [in module %s]"), - sect_offset_str (origin_offset), + sect_offset_str (origin->offset), bfd_get_filename (reader->abfd ())); const gdb_byte *new_info_ptr - = (new_reader->buffer () + to_underlying (origin_offset)); + = (new_reader->buffer () + to_underlying (origin->offset)); if (*parent_entry == nullptr) { @@ -347,7 +343,7 @@ cooked_indexer::scan_attributes (dwarf2_per_cu *scanning_per_cu, if (new_abbrev == nullptr) error (_(DWARF_ERROR_PREFIX "Unexpected null DIE at offset %s [in module %s]"), - sect_offset_str (origin_offset), + sect_offset_str (origin->offset), bfd_get_filename (new_reader->abfd ())); new_info_ptr += bytes_read; @@ -411,8 +407,7 @@ cooked_indexer::index_imported_unit (cutu_reader *reader, const gdb_byte *info_ptr, const abbrev_info *abbrev) { - sect_offset sect_off {}; - bool is_dwz = false; + std::optional<section_and_offset> target; for (int i = 0; i < abbrev->num_attrs; ++i) { @@ -421,19 +416,16 @@ cooked_indexer::index_imported_unit (cutu_reader *reader, info_ptr = reader->read_attribute (&attr, &abbrev->attrs[i], info_ptr); if (attr.name == DW_AT_import) - { - sect_off = attr.get_ref_die_offset (); - is_dwz = (attr.form_is_alt () - || reader->cu ()->per_cu->is_dwz); - } + target = { &get_section_for_ref (attr, reader->cu ()), + attr.get_ref_die_offset () }; } /* Did not find DW_AT_import. */ - if (sect_off == sect_offset (0)) + if (!target.has_value ()) return info_ptr; cutu_reader *new_reader - = ensure_cu_exists (reader, sect_off, is_dwz, true); + = ensure_cu_exists (reader, *target, true); if (new_reader != nullptr) { index_dies (new_reader, new_reader->info_ptr (), nullptr, false); diff --git a/gdb/dwarf2/cooked-indexer.h b/gdb/dwarf2/cooked-indexer.h index 904c55f..83cbf7f 100644 --- a/gdb/dwarf2/cooked-indexer.h +++ b/gdb/dwarf2/cooked-indexer.h @@ -30,6 +30,7 @@ struct cooked_index_worker_result; struct cutu_reader; struct dwarf2_per_cu; struct dwarf2_per_objfile; +struct section_and_offset; /* An instance of this is created to index a CU. */ @@ -55,8 +56,7 @@ private: the DIEs in the CU; when false, this use is assumed to be to look up just a single DIE. */ cutu_reader *ensure_cu_exists (cutu_reader *reader, - sect_offset sect_off, - bool is_dwz, + const section_and_offset §_off, bool for_scanning); /* Index DIEs in the READER starting at INFO_PTR. PARENT is diff --git a/gdb/dwarf2/cu.h b/gdb/dwarf2/cu.h index 9f76789..68010a0 100644 --- a/gdb/dwarf2/cu.h +++ b/gdb/dwarf2/cu.h @@ -27,8 +27,6 @@ #include "gdbsupport/unordered_set.h" #include "dwarf2/die.h" -struct field_info; - /* Type used for delaying computation of method physnames. See comments for compute_delayed_physnames. */ struct delayed_method_info @@ -56,6 +54,11 @@ struct dwarf2_cu DISABLE_COPY_AND_ASSIGN (dwarf2_cu); + /* The section the DIEs were effectively read from. This could be + .debug_info, .debug_types, or with split DWARF, their .dwo + variants. */ + const dwarf2_section_info §ion () const; + /* TU version of handle_DW_AT_stmt_list for read_type_unit_scope. Create the set of symtabs used by this TU, or if this TU is sharing symtabs with another TU and the symtabs have already been created @@ -371,7 +374,7 @@ public: right place. And since the DW_TAG_compile_unit DIE in the split-unit can't have a DW_AT_ranges attribute, we can use the - die->tag != DW_AT_compile_unit + die->tag != DW_TAG_compile_unit to determine whether the base should be added or not. */ ULONGEST gnu_ranges_base = 0; @@ -401,15 +404,6 @@ public: .debug_str_offsets section (8 or 4, depending on the address size). */ std::optional<ULONGEST> str_offsets_base; - /* We may encounter a DIE where a property refers to a field in some - outer type. For example, in Ada, an array length may depend on a - field in some outer record. In this case, we need to be able to - stash a pointer to the 'struct field' into the appropriate - dynamic property baton. However, the fields aren't created until - the type has been fully processed, so we need a temporary - back-link to this object. */ - struct field_info *field_info = nullptr; - /* Mark used when releasing cached dies. */ bool m_mark : 1; diff --git a/gdb/dwarf2/dwz.c b/gdb/dwarf2/dwz.c index 583103b..1aa0d03 100644 --- a/gdb/dwarf2/dwz.c +++ b/gdb/dwarf2/dwz.c @@ -56,35 +56,37 @@ dwz_file::read_string (struct objfile *objfile, LONGEST str_offset) /* A helper function to find the sections for a .dwz file. */ static void -locate_dwz_sections (struct objfile *objfile, bfd *abfd, asection *sectp, - dwz_file *dwz_file) +locate_dwz_sections (objfile *objfile, dwz_file &dwz_file) { - dwarf2_section_info *sect = nullptr; + for (asection *sec : gdb_bfd_sections (dwz_file.dwz_bfd)) + { + dwarf2_section_info *sect = nullptr; - /* Note that we only support the standard ELF names, because .dwz + /* Note that we only support the standard ELF names, because .dwz is ELF-only (at the time of writing). */ - if (dwarf2_elf_names.abbrev.matches (sectp->name)) - sect = &dwz_file->abbrev; - else if (dwarf2_elf_names.info.matches (sectp->name)) - sect = &dwz_file->info; - else if (dwarf2_elf_names.str.matches (sectp->name)) - sect = &dwz_file->str; - else if (dwarf2_elf_names.line.matches (sectp->name)) - sect = &dwz_file->line; - else if (dwarf2_elf_names.macro.matches (sectp->name)) - sect = &dwz_file->macro; - else if (dwarf2_elf_names.gdb_index.matches (sectp->name)) - sect = &dwz_file->gdb_index; - else if (dwarf2_elf_names.debug_names.matches (sectp->name)) - sect = &dwz_file->debug_names; - else if (dwarf2_elf_names.types.matches (sectp->name)) - sect = &dwz_file->types; - - if (sect != nullptr) - { - sect->s.section = sectp; - sect->size = bfd_section_size (sectp); - sect->read (objfile); + if (dwarf2_elf_names.abbrev.matches (sec->name)) + sect = &dwz_file.abbrev; + else if (dwarf2_elf_names.info.matches (sec->name)) + sect = &dwz_file.info; + else if (dwarf2_elf_names.str.matches (sec->name)) + sect = &dwz_file.str; + else if (dwarf2_elf_names.line.matches (sec->name)) + sect = &dwz_file.line; + else if (dwarf2_elf_names.macro.matches (sec->name)) + sect = &dwz_file.macro; + else if (dwarf2_elf_names.gdb_index.matches (sec->name)) + sect = &dwz_file.gdb_index; + else if (dwarf2_elf_names.debug_names.matches (sec->name)) + sect = &dwz_file.debug_names; + else if (dwarf2_elf_names.types.matches (sec->name)) + sect = &dwz_file.types; + + if (sect != nullptr) + { + sect->s.section = sec; + sect->size = bfd_section_size (sec); + sect->read (objfile); + } } } @@ -341,7 +343,7 @@ dwz_file::read_dwz_file (dwarf2_per_objfile *per_objfile) { gdb::unique_xmalloc_ptr<char> abs = gdb_realpath (per_bfd->filename ()); - filename = ldirname (abs.get ()) + SLASH_STRING + filename; + filename = gdb_ldirname (abs.get ()) + SLASH_STRING + filename; } /* First try the file name given in the section. If that doesn't @@ -392,9 +394,7 @@ dwz_file::read_dwz_file (dwarf2_per_objfile *per_objfile) dwz_file_up result (new dwz_file (std::move (dwz_bfd))); - for (asection *sec : gdb_bfd_sections (result->dwz_bfd)) - locate_dwz_sections (per_objfile->objfile, result->dwz_bfd.get (), - sec, result.get ()); + locate_dwz_sections (per_objfile->objfile, *result); gdb_bfd_record_inclusion (per_bfd->obfd, result->dwz_bfd.get ()); bfd_cache_close (result->dwz_bfd.get ()); diff --git a/gdb/dwarf2/frame-tailcall.c b/gdb/dwarf2/frame-tailcall.c index 6464ffb..e31ae10 100644 --- a/gdb/dwarf2/frame-tailcall.c +++ b/gdb/dwarf2/frame-tailcall.c @@ -478,9 +478,7 @@ const struct frame_unwind_legacy dwarf2_tailcall_frame_unwind ( tailcall_frame_prev_arch ); -void _initialize_tailcall_frame (); -void -_initialize_tailcall_frame () +INIT_GDB_FILE (tailcall_frame) { cache_htab = htab_create_alloc (50, cache_hash, cache_eq, NULL, xcalloc, xfree); diff --git a/gdb/dwarf2/frame.c b/gdb/dwarf2/frame.c index 1b4de0d..7a37285 100644 --- a/gdb/dwarf2/frame.c +++ b/gdb/dwarf2/frame.c @@ -2247,9 +2247,7 @@ dwarf2_build_frame_info (struct objfile *objfile) set_comp_unit (objfile, unit.release ()); } -void _initialize_dwarf2_frame (); -void -_initialize_dwarf2_frame () +INIT_GDB_FILE (dwarf2_frame) { #if GDB_SELF_TEST selftests::register_test_foreach_arch ("execute_cfa_program", diff --git a/gdb/dwarf2/frame.h b/gdb/dwarf2/frame.h index f8fd8e8..9357cc1 100644 --- a/gdb/dwarf2/frame.h +++ b/gdb/dwarf2/frame.h @@ -198,6 +198,15 @@ struct dwarf2_frame_state bool armcc_cfa_offsets_reversed = false; }; +/* If DWARF supoprt was requested, create the real prototype for the + append_unwinders function. Otherwise, create a fake inline function. + + There is no need to emit a warning for some of these, because they aren't + actively reading DWARF when this is called, they're just initializing GDB. + + These should probably be moved to dwarf2/public.h. */ +#if defined(DWARF_FORMAT_AVAILABLE) + /* Set the architecture-specific register state initialization function for GDBARCH to INIT_REG. */ @@ -287,4 +296,56 @@ extern void *dwarf2_frame_get_fn_data (const frame_info_ptr &this_frame, void **this_cache, fn_prev_register cookie); +#else /* DWARF_FORMAT_AVAILABLE */ + +static inline void dwarf2_append_unwinders (struct gdbarch *gdbarch) { } + +static inline void dwarf2_frame_set_init_reg ( + gdbarch *gdbarch, void (*init_reg) (struct gdbarch *,int, + dwarf2_frame_state_reg *, + const frame_info_ptr &)) { } + +static inline const struct frame_base * + dwarf2_frame_base_sniffer (const frame_info_ptr &this_frame) +{ + warning (_("No dwarf support available.")); + return nullptr; +} + +static inline void dwarf2_frame_set_signal_frame_p + (gdbarch *gdbarch, int (*signal_frame_p) (struct gdbarch *, + const frame_info_ptr &)) { } + +static inline void *dwarf2_frame_get_fn_data (const frame_info_ptr &this_frame, + void **this_cache, + fn_prev_register cookie) +{ + return nullptr; +} + +static inline void *dwarf2_frame_allocate_fn_data + (const frame_info_ptr &this_frame, void **this_cache, + fn_prev_register cookie, unsigned long size) +{ + return nullptr; +} + +static inline int dwarf2_fetch_cfa_info (struct gdbarch *gdbarch, CORE_ADDR pc, + struct dwarf2_per_cu_data *data, + int *regnum_out, LONGEST *offset_out, + CORE_ADDR *text_offset_out, + const gdb_byte **cfa_start_out, + const gdb_byte **cfa_end_out) +{ + return 0; +} + +static inline void + dwarf2_frame_set_adjust_regnum (struct gdbarch *gdbarch, + int (*adjust_regnum) (struct gdbarch *, + int, int)) +{} + +#endif /* DWARF_FORMAT_AVAILABLE */ + #endif /* GDB_DWARF2_FRAME_H */ diff --git a/gdb/dwarf2/index-cache.c b/gdb/dwarf2/index-cache.c index 1715beb..cfe8ce9 100644 --- a/gdb/dwarf2/index-cache.c +++ b/gdb/dwarf2/index-cache.c @@ -342,9 +342,7 @@ show_index_cache_stats_command (const char *arg, int from_tty) indent, global_index_cache.n_misses ()); } -void _initialize_index_cache (); -void -_initialize_index_cache () +INIT_GDB_FILE (index_cache) { /* Set the default index cache directory. */ std::string cache_dir = get_standard_cache_dir (); diff --git a/gdb/dwarf2/index-write.c b/gdb/dwarf2/index-write.c index 614bdcd..d5b198b 100644 --- a/gdb/dwarf2/index-write.c +++ b/gdb/dwarf2/index-write.c @@ -872,7 +872,7 @@ public: m_debugstrlookup.file_write (file_str); } - void add_cu (dwarf2_per_cu *per_cu, offset_type index) + void add_cu (const dwarf2_per_cu *per_cu, offset_type index) { m_cu_index_htab.emplace (per_cu, index); } @@ -1289,6 +1289,40 @@ write_shortcuts_table (cooked_index *table, data_buf &shortcuts, shortcuts.append_offset (main_name_offset); } +/* Get sorted (by section offset) lists of comp units and type units. */ + +static std::pair<std::vector<const dwarf2_per_cu *>, + std::vector<const signatured_type *>> +get_unit_lists (const dwarf2_per_bfd &per_bfd) +{ + std::vector<const dwarf2_per_cu *> comp_units; + std::vector<const signatured_type *> type_units; + + for (const auto &unit : per_bfd.all_units) + if (unit->is_debug_types) + type_units.emplace_back (static_cast<const signatured_type *> + (unit.get ())); + else + comp_units.emplace_back (unit.get ()); + + auto by_sect_off = [] (const dwarf2_per_cu *lhs, const dwarf2_per_cu *rhs) + { return lhs->sect_off < rhs->sect_off; }; + + /* Sort both lists, even though it is technically not always required: + + - while .gdb_index requires the CU list to be sorted, DWARF 5 doesn't + say anything about the order of CUs in .debug_names. + - .gdb_index doesn't require the TU list to be sorted, and DWARF 5 + doesn't say anything about the order of TUs in .debug_names. + + However, it helps make sure that GDB produce a stable and predictable + output, which is nice. */ + std::sort (comp_units.begin (), comp_units.end (), by_sect_off); + std::sort (type_units.begin (), type_units.end (), by_sect_off); + + return {std::move (comp_units), std::move (type_units)}; +} + /* Write contents of a .gdb_index section for OBJFILE into OUT_FILE. If OBJFILE has an associated dwz file, write contents of a .gdb_index section for that dwz file into DWZ_OUT_FILE. If OBJFILE does not have an @@ -1299,8 +1333,6 @@ write_gdbindex (dwarf2_per_bfd *per_bfd, cooked_index *table, FILE *out_file, FILE *dwz_out_file) { mapped_symtab symtab; - data_buf objfile_cu_list; - data_buf dwz_cu_list; /* While we're scanning CU's create a table that maps a dwarf2_per_cu (which is what addrmap records) to its index (which is what is recorded in the @@ -1308,40 +1340,44 @@ write_gdbindex (dwarf2_per_bfd *per_bfd, cooked_index *table, cu_index_map cu_index_htab; cu_index_htab.reserve (per_bfd->all_units.size ()); - /* Store out the .debug_type CUs, if any. */ - data_buf types_cu_list; + auto [comp_units, type_units] = get_unit_lists (*per_bfd); + int counter = 0; - /* The CU list is already sorted, so we don't need to do additional - work here. */ + /* Write comp units. */ + data_buf objfile_cu_list; + data_buf dwz_cu_list; - int counter = 0; - for (const dwarf2_per_cu_up &per_cu : per_bfd->all_units) + for (const dwarf2_per_cu *per_cu : comp_units) { - const auto insertpair = cu_index_htab.emplace (per_cu.get (), counter); + const auto insertpair = cu_index_htab.emplace (per_cu, counter); gdb_assert (insertpair.second); - /* See enhancement PR symtab/30838. */ - gdb_assert (!(per_cu->is_dwz && per_cu->is_debug_types)); - /* The all_units list contains CUs read from the objfile as well as from the eventual dwz file. We need to place the entry in the corresponding index. */ - data_buf &cu_list = (per_cu->is_debug_types - ? types_cu_list - : per_cu->is_dwz ? dwz_cu_list : objfile_cu_list); + data_buf &cu_list = per_cu->is_dwz ? dwz_cu_list : objfile_cu_list; cu_list.append_uint (8, BFD_ENDIAN_LITTLE, to_underlying (per_cu->sect_off)); - if (per_cu->is_debug_types) - { - signatured_type *sig_type = (signatured_type *) per_cu.get (); - cu_list.append_uint (8, BFD_ENDIAN_LITTLE, - to_underlying (sig_type->type_offset_in_tu)); - cu_list.append_uint (8, BFD_ENDIAN_LITTLE, - sig_type->signature); - } - else - cu_list.append_uint (8, BFD_ENDIAN_LITTLE, per_cu->length ()); + cu_list.append_uint (8, BFD_ENDIAN_LITTLE, per_cu->length ()); + ++counter; + } + + /* Write type units. */ + data_buf types_cu_list; + + for (const signatured_type *sig_type : type_units) + { + const auto insertpair = cu_index_htab.emplace (sig_type, counter); + gdb_assert (insertpair.second); + + /* See enhancement PR symtab/30838. */ + gdb_assert (!sig_type->is_dwz); + types_cu_list.append_uint (8, BFD_ENDIAN_LITTLE, + to_underlying (sig_type->sect_off)); + types_cu_list.append_uint (8, BFD_ENDIAN_LITTLE, + to_underlying (sig_type->type_offset_in_tu)); + types_cu_list.append_uint (8, BFD_ENDIAN_LITTLE, sig_type->signature); ++counter; } @@ -1388,29 +1424,35 @@ write_debug_names (dwarf2_per_bfd *per_bfd, cooked_index *table, const enum bfd_endian dwarf5_byte_order = bfd_big_endian (per_bfd->obfd) ? BFD_ENDIAN_BIG : BFD_ENDIAN_LITTLE; - /* The CU list is already sorted, so we don't need to do additional - work here. Also, the debug_types entries do not appear in - all_units, but only in their own hash table. */ - data_buf cu_list; - data_buf types_cu_list; + auto [comp_units, type_units] = get_unit_lists (*per_bfd); debug_names nametable (per_bfd, dwarf5_is_dwarf64, dwarf5_byte_order); - int counter = 0; - int types_counter = 0; - for (const dwarf2_per_cu_up &per_cu : per_bfd->all_units) + data_buf comp_unit_list; + int comp_unit_counter = 0; + + for (const auto per_cu : comp_units) + { + nametable.add_cu (per_cu, comp_unit_counter); + comp_unit_list.append_uint (nametable.dwarf5_offset_size (), + dwarf5_byte_order, + to_underlying (per_cu->sect_off)); + comp_unit_counter++; + } + + data_buf type_unit_list; + int type_unit_counter = 0; + + for (const auto per_cu : type_units) { - int &this_counter = per_cu->is_debug_types ? types_counter : counter; - data_buf &this_list = per_cu->is_debug_types ? types_cu_list : cu_list; - - nametable.add_cu (per_cu.get (), this_counter); - this_list.append_uint (nametable.dwarf5_offset_size (), - dwarf5_byte_order, - to_underlying (per_cu->sect_off)); - ++this_counter; + nametable.add_cu (per_cu, type_unit_counter); + type_unit_list.append_uint (nametable.dwarf5_offset_size (), + dwarf5_byte_order, + to_underlying (per_cu->sect_off)); + type_unit_counter++; } /* Verify that all units are represented. */ - gdb_assert (counter == per_bfd->all_comp_units.size ()); - gdb_assert (types_counter == per_bfd->all_type_units.size ()); + gdb_assert (comp_unit_counter == per_bfd->num_comp_units); + gdb_assert (type_unit_counter == per_bfd->num_type_units); for (const cooked_index_entry *entry : table->all_entries ()) nametable.insert (entry); @@ -1425,8 +1467,8 @@ write_debug_names (dwarf2_per_bfd *per_bfd, cooked_index *table, + sizeof (dwarf5_augmentation_3)); size_t expected_bytes = 0; expected_bytes += bytes_of_header; - expected_bytes += cu_list.size (); - expected_bytes += types_cu_list.size (); + expected_bytes += comp_unit_list.size (); + expected_bytes += type_unit_list.size (); expected_bytes += nametable.bytes (); data_buf header; @@ -1449,11 +1491,11 @@ write_debug_names (dwarf2_per_bfd *per_bfd, cooked_index *table, header.append_uint (2, dwarf5_byte_order, 0); /* comp_unit_count - The number of CUs in the CU list. */ - header.append_uint (4, dwarf5_byte_order, counter); + header.append_uint (4, dwarf5_byte_order, comp_unit_counter); /* local_type_unit_count - The number of TUs in the local TU list. */ - header.append_uint (4, dwarf5_byte_order, types_counter); + header.append_uint (4, dwarf5_byte_order, type_unit_counter); /* foreign_type_unit_count - The number of TUs in the foreign TU list. */ @@ -1481,8 +1523,8 @@ write_debug_names (dwarf2_per_bfd *per_bfd, cooked_index *table, gdb_assert (header.size () == bytes_of_header); header.file_write (out_file); - cu_list.file_write (out_file); - types_cu_list.file_write (out_file); + comp_unit_list.file_write (out_file); + type_unit_list.file_write (out_file); nametable.file_write (out_file, out_file_str); assert_file_size (out_file, expected_bytes); @@ -1768,9 +1810,7 @@ gdb_index () } /* selftests namespace. */ #endif -void _initialize_dwarf_index_write (); -void -_initialize_dwarf_index_write () +INIT_GDB_FILE (dwarf_index_write) { #if GDB_SELF_TEST selftests::register_test ("gdb_index", selftests::gdb_index); diff --git a/gdb/dwarf2/loc.c b/gdb/dwarf2/loc.c index fa1b4eb..37c85d8 100644 --- a/gdb/dwarf2/loc.c +++ b/gdb/dwarf2/loc.c @@ -1747,7 +1747,7 @@ dwarf2_evaluate_property (const dynamic_prop *prop, if (pinfo == NULL) error (_("cannot find reference address for offset property")); - struct field resolved_field = *baton->field; + struct field resolved_field = baton->field; resolve_dynamic_field (resolved_field, pinfo, initial_frame); /* Storage for memory if we need to read it. */ @@ -4154,9 +4154,7 @@ const struct symbol_computed_ops dwarf2_loclist_funcs = { loclist_generate_c_location }; -void _initialize_dwarf2loc (); -void -_initialize_dwarf2loc () +INIT_GDB_FILE (dwarf2loc) { add_setshow_zuinteger_cmd ("entry-values", class_maintenance, &entry_values_debug, diff --git a/gdb/dwarf2/loc.h b/gdb/dwarf2/loc.h index ebe5c31..c672320 100644 --- a/gdb/dwarf2/loc.h +++ b/gdb/dwarf2/loc.h @@ -20,6 +20,7 @@ #ifndef GDB_DWARF2_LOC_H #define GDB_DWARF2_LOC_H +#include "gdbtypes.h" #include "dwarf2/expr.h" struct symbol_computed_ops; @@ -102,28 +103,6 @@ struct property_addr_info const property_addr_info *next; }; -/* Converts a dynamic property into a static one. FRAME is the frame in which - the property is evaluated; if NULL, the selected frame (if any) is used - instead. - - ADDR_STACK is the stack of addresses that might be needed to evaluate the - property. When evaluating a property that is not related to a type, it can - be NULL. - - Returns true if PROP could be converted and the static value is passed - back into VALUE, otherwise returns false. - - Any values in PUSH_VALUES will be pushed before evaluating the location - expression, PUSH_VALUES[0] will be pushed first, then PUSH_VALUES[1], - etc. This means the during evaluation PUSH_VALUES[0] will be at the - bottom of the stack. */ - -bool dwarf2_evaluate_property (const struct dynamic_prop *prop, - const frame_info_ptr &frame, - const property_addr_info *addr_stack, - CORE_ADDR *value, - gdb::array_view<CORE_ADDR> push_values = {}); - /* A helper for the compiler interface that compiles a single dynamic property to C code. @@ -245,7 +224,7 @@ struct dwarf2_property_baton struct dwarf2_loclist_baton loclist; /* The location is stored in a field of PROPERTY_TYPE. */ - struct field *field; + struct field field; }; }; @@ -310,8 +289,53 @@ extern struct value *indirect_synthetic_pointer Function always returns non-NULL value. It throws NO_ENTRY_VALUE_ERROR if it cannot resolve the parameter for any reason. */ +#if defined(DWARF_FORMAT_AVAILABLE) + +/* Converts a dynamic property into a static one. FRAME is the frame in which + the property is evaluated; if NULL, the selected frame (if any) is used + instead. + + ADDR_STACK is the stack of addresses that might be needed to evaluate the + property. When evaluating a property that is not related to a type, it can + be NULL. + + Returns true if PROP could be converted and the static value is passed + back into VALUE, otherwise returns false. + + Any values in PUSH_VALUES will be pushed before evaluating the location + expression, PUSH_VALUES[0] will be pushed first, then PUSH_VALUES[1], + etc. This means the during evaluation PUSH_VALUES[0] will be at the + bottom of the stack. */ + +bool dwarf2_evaluate_property (const struct dynamic_prop *prop, + const frame_info_ptr &frame, + const property_addr_info *addr_stack, + CORE_ADDR *value, + gdb::array_view<CORE_ADDR> push_values = {}); + extern struct value *value_of_dwarf_reg_entry (struct type *type, const frame_info_ptr &frame, enum call_site_parameter_kind kind, union call_site_parameter_u kind_u); + +#else /* DWARF_FORMAT_AVAILABLE */ + +static inline bool +dwarf2_evaluate_property (const struct dynamic_prop *, const frame_info_ptr &, + const property_addr_info *, CORE_ADDR *, + gdb::array_view<CORE_ADDR> = {}) +{ + return false; +} + +static inline struct value * +value_of_dwarf_reg_entry (struct type *type, const frame_info_ptr &frame, + enum call_site_parameter_kind kind, + union call_site_parameter_u kind_u) +{ + error (_("No dwarf support available.")); +} + +#endif /* DWARF_FORMAT_AVAILABLE */ + #endif /* GDB_DWARF2_LOC_H */ diff --git a/gdb/dwarf2/public.h b/gdb/dwarf2/public.h index ed504c6..f9e7488 100644 --- a/gdb/dwarf2/public.h +++ b/gdb/dwarf2/public.h @@ -30,6 +30,8 @@ enum class dw_index_kind DEBUG_NAMES, }; +#if defined(DWARF_FORMAT_AVAILABLE) + /* Try to locate the sections we need for DWARF 2 debugging information. If these are found, begin reading the DWARF and return true. Otherwise, return false. NAMES points to the dwarf2 @@ -44,4 +46,27 @@ extern bool dwarf2_initialize_objfile extern void dwarf2_build_frame_info (struct objfile *); +/* Append the DWARF-2 frame unwinders to GDBARCH's list. */ + +void dwarf2_append_unwinders (struct gdbarch *gdbarch); + +#else /* DWARF_FORMAT_AVAILABLE */ + +static inline bool +dwarf2_initialize_objfile (struct objfile *, + const struct dwarf2_debug_sections * = nullptr, + bool = false) +{ + warning (_("No dwarf support available.")); + return false; +} + +static inline void +dwarf2_build_frame_info (struct objfile *) +{ + warning (_("No dwarf support available.")); +} + +#endif /* DWARF_FORMAT_AVAILABLE */ + #endif /* GDB_DWARF2_PUBLIC_H */ diff --git a/gdb/dwarf2/read-debug-names.c b/gdb/dwarf2/read-debug-names.c index 11de986..ddf4935 100644 --- a/gdb/dwarf2/read-debug-names.c +++ b/gdb/dwarf2/read-debug-names.c @@ -114,6 +114,14 @@ struct mapped_debug_names_reader gdb::unordered_map<ULONGEST, index_val> abbrev_map; + /* List of CUs in the same order as found in the index header (DWARF 5 section + 6.1.1.4.2). */ + std::vector<dwarf2_per_cu *> comp_units; + + /* List of local TUs in the same order as found in the index (DWARF 5 section + 6.1.1.4.3). */ + std::vector<dwarf2_per_cu *> type_units; + /* Even though the scanning of .debug_names and creation of the cooked index entries is done serially, we create multiple shards so that the finalization step can be parallelized. The shards @@ -232,7 +240,7 @@ mapped_debug_names_reader::scan_one_entry (const char *name, case DW_IDX_compile_unit: { /* Don't crash on bad data. */ - if (ull >= per_objfile->per_bfd->all_comp_units.size ()) + if (ull >= this->comp_units.size ()) { complaint (_(".debug_names entry has bad CU index %s" " [in module %s]"), @@ -240,30 +248,31 @@ mapped_debug_names_reader::scan_one_entry (const char *name, bfd_get_filename (abfd)); continue; } + + per_cu = this->comp_units[ull]; + break; } - per_cu = per_objfile->per_bfd->get_cu (ull); - break; case DW_IDX_type_unit: - /* Don't crash on bad data. */ - if (ull >= per_objfile->per_bfd->all_type_units.size ()) - { - complaint (_(".debug_names entry has bad TU index %s" - " [in module %s]"), - pulongest (ull), - bfd_get_filename (abfd)); - continue; - } { - int nr_cus = per_objfile->per_bfd->all_comp_units.size (); - per_cu = per_objfile->per_bfd->get_cu (nr_cus + ull); + /* Don't crash on bad data. */ + if (ull >= this->type_units.size ()) + { + complaint (_(".debug_names entry has bad TU index %s" + " [in module %s]"), + pulongest (ull), + bfd_get_filename (abfd)); + continue; + } + + per_cu = this->type_units[ull]; + break; } - break; case DW_IDX_die_offset: die_offset = sect_offset (ull); /* In a per-CU index (as opposed to a per-module index), index entries without CU attribute implicitly refer to the single CU. */ - if (per_cu == NULL) - per_cu = per_objfile->per_bfd->get_cu (0); + if (per_cu == nullptr) + per_cu = this->comp_units[0]; break; case DW_IDX_parent: parent = ull; @@ -416,15 +425,11 @@ cooked_index_worker_debug_names::do_reading () { complaint_interceptor complaint_handler; - try + /* Arbitrarily put all exceptions into the first result. */ + m_map.indices[0].catch_error ([&] () { m_map.scan_all_names (); - } - catch (gdb_exception &exc) - { - /* Arbitrarily put all exceptions into the first result. */ - m_map.indices[0].note_error (std::move (exc)); - } + }); bool first = true; for (auto &iter : m_map.indices) @@ -444,45 +449,45 @@ cooked_index_worker_debug_names::do_reading () bfd_thread_cleanup (); } -/* Check the signatured type hash table from .debug_names. */ +/* Build the list of TUs (mapped_debug_names_reader::type_units) from the index + header and verify that it matches the list of TUs read from the DIEs in + `.debug_info`. + + Return true if they match, false otherwise. */ static bool -check_signatured_type_table_from_debug_names - (dwarf2_per_objfile *per_objfile, - const mapped_debug_names_reader &map, - struct dwarf2_section_info *section) +build_and_check_tu_list_from_debug_names (dwarf2_per_objfile *per_objfile, + mapped_debug_names_reader &map, + dwarf2_section_info *section) { struct objfile *objfile = per_objfile->objfile; dwarf2_per_bfd *per_bfd = per_objfile->per_bfd; - int nr_cus = per_bfd->all_comp_units.size (); - int nr_cus_tus = per_bfd->all_units.size (); section->read (objfile); - uint32_t j = nr_cus; for (uint32_t i = 0; i < map.tu_count; ++i) { + /* Read one entry from the TU list. */ sect_offset sect_off = (sect_offset) (extract_unsigned_integer (map.tu_table_reordered + i * map.offset_size, map.offset_size, map.dwarf5_byte_order)); - bool found = false; - for (; j < nr_cus_tus; j++) - if (per_bfd->get_cu (j)->sect_off == sect_off) - { - found = true; - break; - } - if (!found) + /* Find the matching dwarf2_per_cu. */ + dwarf2_per_cu *per_cu = dwarf2_find_unit ({ section, sect_off }, + per_bfd); + + if (per_cu == nullptr || !per_cu->is_debug_types) { warning (_("Section .debug_names has incorrect entry in TU table," " ignoring .debug_names.")); return false; } - per_bfd->all_comp_units_index_tus.push_back (per_bfd->get_cu (j)); + + map.type_units.emplace_back (per_cu); } + return true; } @@ -704,40 +709,11 @@ read_debug_names_from_section (dwarf2_per_objfile *per_objfile, list. */ static bool -check_cus_from_debug_names_list (dwarf2_per_bfd *per_bfd, - const mapped_debug_names_reader &map, - dwarf2_section_info §ion, - bool is_dwz) +build_and_check_cu_list_from_debug_names (dwarf2_per_bfd *per_bfd, + mapped_debug_names_reader &map, + dwarf2_section_info §ion) { - int nr_cus = per_bfd->all_comp_units.size (); - - if (!map.augmentation_is_gdb) - { - uint32_t j = 0; - for (uint32_t i = 0; i < map.cu_count; ++i) - { - sect_offset sect_off - = (sect_offset) (extract_unsigned_integer - (map.cu_table_reordered + i * map.offset_size, - map.offset_size, - map.dwarf5_byte_order)); - bool found = false; - for (; j < nr_cus; j++) - if (per_bfd->get_cu (j)->sect_off == sect_off) - { - found = true; - break; - } - if (!found) - { - warning (_("Section .debug_names has incorrect entry in CU table," - " ignoring .debug_names.")); - return false; - } - per_bfd->all_comp_units_index_cus.push_back (per_bfd->get_cu (j)); - } - return true; - } + int nr_cus = per_bfd->num_comp_units; if (map.cu_count != nr_cus) { @@ -753,43 +729,51 @@ check_cus_from_debug_names_list (dwarf2_per_bfd *per_bfd, (map.cu_table_reordered + i * map.offset_size, map.offset_size, map.dwarf5_byte_order)); - if (sect_off != per_bfd->get_cu (i)->sect_off) + + /* Find the matching dwarf2_per_cu. */ + dwarf2_per_cu *per_cu = dwarf2_find_unit ({ §ion, sect_off }, per_bfd); + + if (per_cu == nullptr || per_cu->is_debug_types) { warning (_("Section .debug_names has incorrect entry in CU table," " ignoring .debug_names.")); return false; } + + map.comp_units.emplace_back (per_cu); } return true; } -/* Read the CU list from the mapped index, and use it to create all - the CU objects for this dwarf2_per_objfile. */ +/* Build the list of CUs (mapped_debug_names_reader::compile_units) from the + index header and verify that it matches the list of CUs read from the DIEs in + `.debug_info`. + + Return true if they match, false otherwise. */ static bool -check_cus_from_debug_names (dwarf2_per_bfd *per_bfd, - const mapped_debug_names_reader &map, - const mapped_debug_names_reader &dwz_map) +build_and_check_cu_lists_from_debug_names (dwarf2_per_bfd *per_bfd, + mapped_debug_names_reader &map, + mapped_debug_names_reader &dwz_map) { - if (!check_cus_from_debug_names_list (per_bfd, map, per_bfd->infos[0], - false /* is_dwz */)) + if (!build_and_check_cu_list_from_debug_names (per_bfd, map, + per_bfd->infos[0])) return false; if (dwz_map.cu_count == 0) return true; dwz_file *dwz = per_bfd->get_dwz_file (); - return check_cus_from_debug_names_list (per_bfd, dwz_map, dwz->info, - true /* is_dwz */); + return build_and_check_cu_list_from_debug_names (per_bfd, dwz_map, dwz->info); } -/* This does all the work for dwarf2_read_debug_names, but putting it - into a separate function makes some cleanup a bit simpler. */ +/* See read-debug-names.h. */ -static bool -do_dwarf2_read_debug_names (dwarf2_per_objfile *per_objfile) +bool +dwarf2_read_debug_names (dwarf2_per_objfile *per_objfile) { + scoped_remove_all_units remove_all_units (*per_objfile->per_bfd); mapped_debug_names_reader map; mapped_debug_names_reader dwz_map; struct objfile *objfile = per_objfile->objfile; @@ -819,7 +803,7 @@ do_dwarf2_read_debug_names (dwarf2_per_objfile *per_objfile) } create_all_units (per_objfile); - if (!check_cus_from_debug_names (per_bfd, map, dwz_map)) + if (!build_and_check_cu_lists_from_debug_names (per_bfd, map, dwz_map)) return false; if (map.tu_count != 0) @@ -835,8 +819,8 @@ do_dwarf2_read_debug_names (dwarf2_per_objfile *per_objfile) ? &per_bfd->types[0] : &per_bfd->infos[0]); - if (!check_signatured_type_table_from_debug_names (per_objfile, - map, section)) + if (!build_and_check_tu_list_from_debug_names (per_objfile, map, + section)) return false; } @@ -866,17 +850,7 @@ do_dwarf2_read_debug_names (dwarf2_per_objfile *per_objfile) (per_objfile, std::move (map))); auto idx = std::make_unique<debug_names_index> (std::move (cidn)); per_bfd->start_reading (std::move (idx)); + remove_all_units.disable (); return true; } - -/* See read-debug-names.h. */ - -bool -dwarf2_read_debug_names (dwarf2_per_objfile *per_objfile) -{ - bool result = do_dwarf2_read_debug_names (per_objfile); - if (!result) - per_objfile->per_bfd->all_units.clear (); - return result; -} diff --git a/gdb/dwarf2/read-gdb-index.c b/gdb/dwarf2/read-gdb-index.c index 2029c3e..fc7b654 100644 --- a/gdb/dwarf2/read-gdb-index.c +++ b/gdb/dwarf2/read-gdb-index.c @@ -117,6 +117,10 @@ struct mapped_gdb_index : public dwarf_scanner_base /* Index data format version. */ int version = 0; + /* Compile units followed by type units, in the order as found in the + index. Indices found in index entries can index directly into this. */ + std::vector<dwarf2_per_cu *> units; + /* The address table data. */ gdb::array_view<const gdb_byte> address_table; @@ -1106,14 +1110,14 @@ dw2_expand_marked_cus (dwarf2_per_objfile *per_objfile, offset_type idx, } /* Don't crash on bad data. */ - if (cu_index >= per_objfile->per_bfd->all_units.size ()) + if (cu_index >= index.units.size ()) { complaint (_(".gdb_index entry has bad CU index" " [in module %s]"), objfile_name (per_objfile->objfile)); continue; } - dwarf2_per_cu *per_cu = per_objfile->per_bfd->get_cu (cu_index); + dwarf2_per_cu *per_cu = index.units[cu_index]; if (!dw2_expand_symtabs_matching_one (per_cu, per_objfile, file_matcher, expansion_notify, lang_matcher)) @@ -1313,7 +1317,7 @@ static void create_cus_from_gdb_index_list (dwarf2_per_bfd *per_bfd, const gdb_byte *cu_list, offset_type n_elements, struct dwarf2_section_info *section, - int is_dwz) + int is_dwz, std::vector<dwarf2_per_cu *> &units) { for (offset_type i = 0; i < n_elements; i += 2) { @@ -1324,10 +1328,10 @@ create_cus_from_gdb_index_list (dwarf2_per_bfd *per_bfd, ULONGEST length = extract_unsigned_integer (cu_list + 8, 8, BFD_ENDIAN_LITTLE); cu_list += 2 * 8; - per_bfd->all_units.emplace_back (per_bfd->allocate_per_cu (section, - sect_off, - length, - is_dwz)); + dwarf2_per_cu_up per_cu = per_bfd->allocate_per_cu (section, sect_off, + length, is_dwz); + units.emplace_back (per_cu.get ()); + per_bfd->all_units.emplace_back (std::move (per_cu)); } } @@ -1337,20 +1341,21 @@ create_cus_from_gdb_index_list (dwarf2_per_bfd *per_bfd, static void create_cus_from_gdb_index (dwarf2_per_bfd *per_bfd, const gdb_byte *cu_list, offset_type cu_list_elements, + std::vector<dwarf2_per_cu *> &units, const gdb_byte *dwz_list, offset_type dwz_elements) { gdb_assert (per_bfd->all_units.empty ()); per_bfd->all_units.reserve ((cu_list_elements + dwz_elements) / 2); create_cus_from_gdb_index_list (per_bfd, cu_list, cu_list_elements, - &per_bfd->infos[0], 0); + &per_bfd->infos[0], 0, units); if (dwz_elements == 0) return; dwz_file *dwz = per_bfd->get_dwz_file (); create_cus_from_gdb_index_list (per_bfd, dwz_list, dwz_elements, - &dwz->info, 1); + &dwz->info, 1, units); } /* Create the signatured type hash table from the index. */ @@ -1358,7 +1363,8 @@ create_cus_from_gdb_index (dwarf2_per_bfd *per_bfd, static void create_signatured_type_table_from_gdb_index (dwarf2_per_bfd *per_bfd, struct dwarf2_section_info *section, - const gdb_byte *bytes, offset_type elements) + const gdb_byte *bytes, offset_type elements, + std::vector<dwarf2_per_cu *> &units) { signatured_type_set sig_types_hash; @@ -1382,6 +1388,7 @@ create_signatured_type_table_from_gdb_index sig_type->type_offset_in_tu = type_offset_in_tu; sig_types_hash.emplace (sig_type.get ()); + units.emplace_back (sig_type.get ()); per_bfd->all_units.emplace_back (sig_type.release ()); } @@ -1412,21 +1419,21 @@ create_addrmap_from_gdb_index (dwarf2_per_objfile *per_objfile, cu_index = extract_unsigned_integer (iter, 4, BFD_ENDIAN_LITTLE); iter += 4; - if (lo > hi) + if (lo >= hi) { complaint (_(".gdb_index address table has invalid range (%s - %s)"), hex_string (lo), hex_string (hi)); continue; } - if (cu_index >= per_bfd->all_units.size ()) + if (cu_index >= index->units.size ()) { complaint (_(".gdb_index address table has invalid CU number %u"), (unsigned) cu_index); continue; } - mutable_map.set_empty (lo, hi - 1, per_bfd->get_cu (cu_index)); + mutable_map.set_empty (lo, hi - 1, index->units[cu_index]); } index->index_addrmap @@ -1482,6 +1489,7 @@ dwarf2_read_gdb_index offset_type cu_list_elements, types_list_elements, dwz_list_elements = 0; struct objfile *objfile = per_objfile->objfile; dwarf2_per_bfd *per_bfd = per_objfile->per_bfd; + scoped_remove_all_units remove_all_units (*per_bfd); gdb::array_view<const gdb_byte> main_index_contents = get_gdb_index_contents (objfile, per_bfd); @@ -1528,8 +1536,8 @@ dwarf2_read_gdb_index } } - create_cus_from_gdb_index (per_bfd, cu_list, cu_list_elements, dwz_list, - dwz_list_elements); + create_cus_from_gdb_index (per_bfd, cu_list, cu_list_elements, map->units, + dwz_list, dwz_list_elements); if (types_list_elements) { @@ -1537,10 +1545,7 @@ dwarf2_read_gdb_index an index. */ if (per_bfd->infos.size () > 1 || per_bfd->types.size () > 1) - { - per_bfd->all_units.clear (); - return false; - } + return false; dwarf2_section_info *section = (per_bfd->types.size () == 1 @@ -1548,7 +1553,8 @@ dwarf2_read_gdb_index : &per_bfd->infos[0]); create_signatured_type_table_from_gdb_index (per_bfd, section, types_list, - types_list_elements); + types_list_elements, + map->units); } finalize_all_units (per_bfd); @@ -1558,14 +1564,12 @@ dwarf2_read_gdb_index set_main_name_from_gdb_index (per_objfile, map.get ()); per_bfd->index_table = std::move (map); + remove_all_units.disable (); return true; } -void _initialize_read_gdb_index (); - -void -_initialize_read_gdb_index () +INIT_GDB_FILE (read_gdb_index) { add_setshow_boolean_cmd ("use-deprecated-index-sections", no_class, &use_deprecated_index_sections, _("\ diff --git a/gdb/dwarf2/read.c b/gdb/dwarf2/read.c index 71fa793..29650c5 100644 --- a/gdb/dwarf2/read.c +++ b/gdb/dwarf2/read.c @@ -147,7 +147,7 @@ static const registry<bfd>::key<dwarf2_per_bfd> dwarf2_per_bfd_bfd_data_key; static const registry<objfile>::key<dwarf2_per_bfd> dwarf2_per_bfd_objfile_data_key; -/* The "aclass" indices for various kinds of computed DWARF symbols. */ +/* The "loc_class" indices for various kinds of computed DWARF symbols. */ static int dwarf2_locexpr_index; static int dwarf2_loclist_index; @@ -289,24 +289,29 @@ struct dwo_sections struct dwo_unit { /* Backlink to the containing struct dwo_file. */ - struct dwo_file *dwo_file; + struct dwo_file *dwo_file = nullptr; /* The "id" that distinguishes this CU/TU. .debug_info calls this "dwo_id", .debug_types calls this "signature". Since signatures came first, we stick with it for consistency. */ - ULONGEST signature; + ULONGEST signature = 0; /* The section this CU/TU lives in, in the DWO file. */ - struct dwarf2_section_info *section; + dwarf2_section_info *section = nullptr; + + /* This is set if SECTION is owned by this dwo_unit. */ + dwarf2_section_info_up section_holder; /* Same as dwarf2_per_cu::{sect_off,length} but in the DWO section. */ - sect_offset sect_off; - unsigned int length; + sect_offset sect_off {}; + unsigned int length = 0; /* For types, offset in the type's DIE of the type defined by this TU. */ cu_offset type_offset_in_tu; }; +using dwo_unit_up = std::unique_ptr<dwo_unit>; + /* Hash function for dwo_unit objects, based on the signature. */ struct dwo_unit_hash @@ -316,7 +321,7 @@ struct dwo_unit_hash std::size_t operator() (ULONGEST signature) const noexcept { return signature; } - std::size_t operator() (const dwo_unit *unit) const noexcept + std::size_t operator() (const dwo_unit_up &unit) const noexcept { return (*this) (unit->signature); } }; @@ -330,16 +335,16 @@ struct dwo_unit_eq { using is_transparent = void; - bool operator() (ULONGEST sig, const dwo_unit *unit) const noexcept + bool operator() (ULONGEST sig, const dwo_unit_up &unit) const noexcept { return sig == unit->signature; } - bool operator() (const dwo_unit *a, const dwo_unit *b) const noexcept + bool operator() (const dwo_unit_up &a, const dwo_unit_up &b) const noexcept { return (*this) (a->signature, b); } }; /* Set of dwo_unit object, using their signature as identity. */ -using dwo_unit_set = gdb::unordered_set<dwo_unit *, dwo_unit_hash, dwo_unit_eq>; +using dwo_unit_set = gdb::unordered_set<dwo_unit_up, dwo_unit_hash, dwo_unit_eq>; /* include/dwarf2.h defines the DWP section codes. It defines a max value but it doesn't define a min value, which we @@ -599,6 +604,11 @@ struct dwp_file dwo_unit_set loaded_cus; dwo_unit_set loaded_tus; +#if CXX_STD_THREAD + /* Mutex to synchronize access to LOADED_CUS and LOADED_TUS. */ + std::mutex loaded_cutus_lock; +#endif + /* Table to map ELF section numbers to their sections. This is only needed for the DWP V1 file format. */ unsigned int num_sections = 0; @@ -698,12 +708,6 @@ struct field_info we're reading. */ std::vector<variant_part_builder> variant_parts; - /* All the field batons that must be updated. This is only used - when a type's property depends on a field of this structure; for - example in Ada when an array's length may come from a field of an - enclosing record. */ - gdb::unordered_map<dwarf2_property_baton *, sect_offset> field_batons; - /* Return the total number of fields (including baseclasses). */ int nfields () const { @@ -1686,6 +1690,7 @@ dwarf2_per_bfd::allocate_per_cu (dwarf2_section_info *section, dwarf2_per_cu_up result (new dwarf2_per_cu (this, section, sect_off, length, is_dwz)); result->index = all_units.size (); + this->num_comp_units++; return result; } @@ -1702,7 +1707,7 @@ dwarf2_per_bfd::allocate_signatured_type (dwarf2_section_info *section, = std::make_unique<signatured_type> (this, section, sect_off, length, is_dwz, signature); result->index = all_units.size (); - tu_stats.nr_tus++; + this->num_type_units++; return result; } @@ -1897,13 +1902,13 @@ dwarf2_base_index_functions::print_stats (struct objfile *objfile, for (int i = 0; i < total; ++i) { - dwarf2_per_cu *per_cu = per_objfile->per_bfd->get_cu (i); + dwarf2_per_cu *per_cu = per_objfile->per_bfd->get_unit (i); if (!per_objfile->symtab_set_p (per_cu)) ++count; } - gdb_printf (_(" Number of read CUs: %d\n"), total - count); - gdb_printf (_(" Number of unread CUs: %d\n"), count); + gdb_printf (_(" Number of read units: %d\n"), total - count); + gdb_printf (_(" Number of unread units: %d\n"), count); } void @@ -2366,6 +2371,24 @@ get_abbrev_section_for_cu (dwarf2_per_cu *this_cu) return abbrev; } +/* "less than" function used to both sort and bisect units in the + `dwarf2_per_bfd::all_units` vector. Return true if the LHS CU comes before + (is "less" than) the section and offset in RHS. + + For simplicity, sort sections by their pointer. This is not ideal, because + it can cause the behavior to change across runs, making some bugs harder to + investigate. An improvement would be for sections to be sorted by their + properties. */ + +static bool +all_units_less_than (const dwarf2_per_cu &lhs, const section_and_offset &rhs) +{ + if (lhs.section != rhs.section) + return lhs.section < rhs.section; + + return lhs.sect_off < rhs.offset; +} + /* Fetch the abbreviation table offset from a comp or type unit header. */ static sect_offset @@ -2409,7 +2432,17 @@ add_type_unit (dwarf2_per_bfd *per_bfd, dwarf2_section_info *section, false /* is_dwz */, sig); signatured_type *sig_type = sig_type_holder.get (); - per_bfd->all_units.emplace_back (sig_type_holder.release ()); + /* Preserve the ordering of per_bfd->all_units. */ + auto insert_it + = std::lower_bound (per_bfd->all_units.begin (), per_bfd->all_units.end (), + sig_type, + [] (const dwarf2_per_cu_up &lhs, + const signatured_type *rhs) { + return all_units_less_than (*lhs, { rhs->section, + rhs->sect_off }); + }); + + per_bfd->all_units.emplace (insert_it, sig_type_holder.release ()); auto emplace_ret = per_bfd->signatured_types.emplace (sig_type); /* Assert that an insertion took place - that there wasn't a type unit with @@ -2493,7 +2526,7 @@ lookup_dwo_signatured_type (struct dwarf2_cu *cu, ULONGEST sig) if (it == dwo_file->tus.end ()) return nullptr; - dwo_unit *dwo_entry = *it; + dwo_unit *dwo_entry = it->get (); /* If the global table doesn't have an entry for this TU, add one. */ if (sig_type_it == per_bfd->signatured_types.end ()) @@ -2783,13 +2816,6 @@ dwo_unit * cutu_reader::lookup_dwo_unit (dwarf2_cu *cu, die_info *comp_unit_die, const char *dwo_name) { -#if CXX_STD_THREAD - /* We need a lock here to handle the DWO hash table. */ - static std::mutex dwo_lock; - - std::lock_guard<std::mutex> guard (dwo_lock); -#endif - dwarf2_per_cu *per_cu = cu->per_cu; struct dwo_unit *dwo_unit; const char *comp_dir; @@ -3215,10 +3241,11 @@ private: void print_tu_stats (dwarf2_per_objfile *per_objfile) { - struct tu_stats *tu_stats = &per_objfile->per_bfd->tu_stats; + dwarf2_per_bfd *per_bfd = per_objfile->per_bfd; + tu_stats *tu_stats = &per_bfd->tu_stats; dwarf_read_debug_printf ("Type unit statistics:"); - dwarf_read_debug_printf (" %d TUs", tu_stats->nr_tus); + dwarf_read_debug_printf (" %d TUs", per_bfd->num_type_units); dwarf_read_debug_printf (" %d uniq abbrev tables", tu_stats->nr_uniq_abbrev_tables); dwarf_read_debug_printf (" %d symtabs from stmt_list entries", @@ -3368,7 +3395,7 @@ cooked_index_worker_debug_info::process_type_units abbrev_table_up abbrev_table; sect_offset abbrev_offset; - if (per_objfile->per_bfd->all_type_units.size () == 0) + if (per_objfile->per_bfd->num_type_units == 0) return; /* TUs typically share abbrev tables, and there can be way more TUs than @@ -3395,7 +3422,7 @@ cooked_index_worker_debug_info::process_type_units /* Sort in a separate table to maintain the order of all_units for .gdb_index: TU indices directly index all_type_units. */ std::vector<tu_abbrev_offset> sorted_by_abbrev; - sorted_by_abbrev.reserve (per_objfile->per_bfd->all_type_units.size ()); + sorted_by_abbrev.reserve (per_objfile->per_bfd->num_type_units); for (const auto &cu : per_objfile->per_bfd->all_units) if (cu->is_debug_types) @@ -3428,7 +3455,10 @@ cooked_index_worker_debug_info::process_type_units abbrev_table.get (), nullptr, false, language_minimal); if (!reader.is_dummy ()) - process_type_unit (&reader, storage); + storage->catch_error ([&] () + { + process_type_unit (&reader, storage); + }); } } @@ -3464,13 +3494,16 @@ void cooked_index_worker_debug_info::process_skeletonless_type_units (dwarf2_per_objfile *per_objfile, cooked_index_worker_result *storage) { - scoped_time_it time_it ("DWARF skeletonless type units"); + scoped_time_it time_it ("DWARF skeletonless type units", m_per_command_time); /* Skeletonless TUs in DWP files without .gdb_index is not supported yet. */ if (per_objfile->per_bfd->dwp_file == nullptr) for (const dwo_file_up &file : per_objfile->per_bfd->dwo_files) - for (dwo_unit *unit : file->tus) - process_skeletonless_type_unit (unit, per_objfile, storage); + for (const dwo_unit_up &unit : file->tus) + storage->catch_error ([&] () + { + process_skeletonless_type_unit (unit.get (), per_objfile, storage); + }); } void @@ -3489,14 +3522,10 @@ cooked_index_worker_debug_info::process_units (size_t task_number, { dwarf2_per_cu *per_cu = inner->get (); - try + thread_storage.catch_error ([&] () { process_unit (per_cu, m_per_objfile, &thread_storage); - } - catch (gdb_exception &except) - { - thread_storage.note_error (std::move (except)); - } + }); } thread_storage.done_reading (complaint_handler.release ()); @@ -3574,7 +3603,7 @@ cooked_index_worker_debug_info::do_reading () gdb_assert (iter != last); workers.add_task ([this, task_count, iter, last] () { - scoped_time_it time_it ("DWARF indexing worker"); + scoped_time_it time_it ("DWARF indexing worker", m_per_command_time); process_units (task_count, iter, last); }); @@ -3645,16 +3674,22 @@ read_comp_units_from_section (dwarf2_per_objfile *per_objfile, } } -/* Initialize the views on all_units. */ +/* See read.h. */ void finalize_all_units (dwarf2_per_bfd *per_bfd) { - size_t nr_tus = per_bfd->tu_stats.nr_tus; - size_t nr_cus = per_bfd->all_units.size () - nr_tus; - gdb::array_view<dwarf2_per_cu_up> tmp = per_bfd->all_units; - per_bfd->all_comp_units = tmp.slice (0, nr_cus); - per_bfd->all_type_units = tmp.slice (nr_cus, nr_tus); + /* Sanity check. */ + gdb_assert (per_bfd->all_units.size () + == per_bfd->num_comp_units + per_bfd->num_type_units); + + /* Ensure that the all_units vector is in the expected order for + dwarf2_find_containing_unit to be able to perform a binary search. */ + std::sort (per_bfd->all_units.begin (), per_bfd->all_units.end (), + [] (const dwarf2_per_cu_up &a, const dwarf2_per_cu_up &b) + { + return all_units_less_than (*a, { b->section, b->sect_off }); + }); } /* See read.h. */ @@ -3663,6 +3698,7 @@ void create_all_units (dwarf2_per_objfile *per_objfile) { gdb_assert (per_objfile->per_bfd->all_units.empty ()); + scoped_remove_all_units remove_all_units (*per_objfile->per_bfd); signatured_type_set sig_types; @@ -3683,8 +3719,6 @@ create_all_units (dwarf2_per_objfile *per_objfile) if (!dwz->types.empty ()) { - per_objfile->per_bfd->all_units.clear (); - /* See enhancement PR symtab/30838. */ error (_(DWARF_ERROR_PREFIX ".debug_types section not supported in dwz file")); @@ -3694,6 +3728,7 @@ create_all_units (dwarf2_per_objfile *per_objfile) per_objfile->per_bfd->signatured_types = std::move (sig_types); finalize_all_units (per_objfile->per_bfd); + remove_all_units.disable (); } /* Return the initial uleb128 in the die at INFO_PTR. */ @@ -4226,7 +4261,7 @@ fixup_go_packaging (struct dwarf2_cu *cu) struct symbol *sym = list->symbol[i]; if (sym->language () == language_go - && sym->aclass () == LOC_BLOCK) + && sym->loc_class () == LOC_BLOCK) { gdb::unique_xmalloc_ptr<char> this_package_name = go_symbol_package_name (sym); @@ -4263,7 +4298,7 @@ fixup_go_packaging (struct dwarf2_cu *cu) sym->set_language (language_go, &objfile->objfile_obstack); sym->compute_and_set_names (saved_package_name, false, objfile->per_bfd); sym->set_domain (TYPE_DOMAIN); - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_type (type); add_symbol_to_list (sym, cu->get_builder ()->get_global_symbols ()); @@ -4473,9 +4508,9 @@ quirk_rust_enum (struct type *type, struct objfile *objfile) else { struct type *disr_type = nullptr; - for (int i = 0; i < type->num_fields (); ++i) + for (const auto &field : type->fields ()) { - disr_type = type->field (i).type (); + disr_type = field.type (); if (disr_type->code () != TYPE_CODE_STRUCT) { @@ -4514,7 +4549,7 @@ quirk_rust_enum (struct type *type, struct objfile *objfile) field *new_fields = (struct field *) TYPE_ZALLOC (type, ((type->num_fields () + 1) * sizeof (struct field))); - memcpy (new_fields + 1, type->fields (), + memcpy (new_fields + 1, type->fields ().data (), type->num_fields () * sizeof (struct field)); type->set_fields (new_fields); type->set_num_fields (type->num_fields () + 1); @@ -4528,13 +4563,12 @@ quirk_rust_enum (struct type *type, struct objfile *objfile) variant name. For convenience we build a map here. */ struct type *enum_type = disr_field->type (); gdb::unordered_map<std::string_view, ULONGEST> discriminant_map; - for (int i = 0; i < enum_type->num_fields (); ++i) + for (const auto &field : enum_type->fields ()) { - if (enum_type->field (i).loc_kind () == FIELD_LOC_KIND_ENUMVAL) + if (field.loc_kind () == FIELD_LOC_KIND_ENUMVAL) { - const char *name - = rust_last_path_segment (enum_type->field (i).name ()); - discriminant_map[name] = enum_type->field (i).loc_enumval (); + const char *name = rust_last_path_segment (field.name ()); + discriminant_map[name] = field.loc_enumval (); } } @@ -4570,7 +4604,7 @@ quirk_rust_enum (struct type *type, struct objfile *objfile) if (sub_type->num_fields () > 0) { sub_type->set_num_fields (sub_type->num_fields () - 1); - sub_type->set_fields (sub_type->fields () + 1); + sub_type->set_fields (sub_type->fields ().data () + 1); } type->field (i).set_name (variant_name); sub_type->set_name @@ -4910,6 +4944,21 @@ process_full_type_unit (dwarf2_cu *cu) cu->reset_builder (); } +/* See read.h. */ + +const dwarf2_section_info & +get_section_for_ref (const attribute &attr, dwarf2_cu *cu) +{ + gdb_assert (attr.form_is_ref ()); + + if (attr.form_is_alt ()) + return cu->per_cu->per_bfd->get_dwz_file (true)->info; + + /* If the source is already in the supplementary (dwz) file, then CU->SECTION + already represents the section in the supplementary file. */ + return cu->section (); +} + /* Process an imported unit DIE. */ static void @@ -4929,12 +4978,11 @@ process_imported_unit_die (struct die_info *die, struct dwarf2_cu *cu) attr = dwarf2_attr (die, DW_AT_import, cu); if (attr != NULL) { + const dwarf2_section_info §ion = get_section_for_ref (*attr, cu); sect_offset sect_off = attr->get_ref_die_offset (); - bool is_dwz = attr->form_is_alt () || cu->per_cu->is_dwz; dwarf2_per_objfile *per_objfile = cu->per_objfile; dwarf2_per_cu *per_cu - = dwarf2_find_containing_comp_unit (sect_off, is_dwz, - per_objfile->per_bfd); + = dwarf2_find_containing_unit ({ §ion, sect_off }, per_objfile); /* We're importing a C++ compilation unit with tag DW_TAG_compile_unit into another compilation unit, at root level. Regard this as a hint, @@ -5636,7 +5684,7 @@ read_alias (struct die_info *die, struct dwarf2_cu *cu) type = die_type (d, imported_cu); struct symbol *sym = new_symbol (die, type, cu); attr = dwarf2_attr (d, DW_AT_location, imported_cu); - sym->set_aclass_index (LOC_UNRESOLVED); + sym->set_loc_class_index (LOC_UNRESOLVED); if (attr != nullptr) var_decode_location (attr, sym, cu); return true; @@ -5859,7 +5907,7 @@ find_file_and_directory (struct die_info *die, struct dwarf2_cu *cu) && res.get_name () != nullptr && IS_ABSOLUTE_PATH (res.get_name ())) { - res.set_comp_dir (ldirname (res.get_name ())); + res.set_comp_dir (gdb_ldirname (res.get_name ())); res.set_name (make_unique_xstrdup (lbasename (res.get_name ()))); } @@ -6055,6 +6103,20 @@ read_file_scope (struct die_info *die, struct dwarf2_cu *cu) } } +/* See cu.h. + + This function is defined in this file (instead of cu.c) because it needs + to see the definition of struct dwo_unit. */ + +const dwarf2_section_info & +dwarf2_cu::section () const +{ + if (this->dwo_unit != nullptr) + return *this->dwo_unit->section; + else + return *this->per_cu->section; +} + void dwarf2_cu::setup_type_unit_groups (struct die_info *die) { @@ -6206,11 +6268,33 @@ static dwo_file * lookup_dwo_file (dwarf2_per_bfd *per_bfd, const char *dwo_name, const char *comp_dir) { +#if CXX_STD_THREAD + std::lock_guard<std::mutex> guard (per_bfd->dwo_files_lock); +#endif + auto it = per_bfd->dwo_files.find (dwo_file_search {dwo_name, comp_dir}); return it != per_bfd->dwo_files.end () ? it->get() : nullptr; } +/* Add DWO_FILE to the per-BFD DWO file hash table. + + Return the dwo_file actually kept in the hash table. + + If another thread raced with this one, opening the exact same DWO file and + inserting it first in the hash table, then keep that other thread's copy + and DWO_FILE gets freed. */ + +static dwo_file * +add_dwo_file (dwarf2_per_bfd *per_bfd, dwo_file_up dwo_file) +{ +#if CXX_STD_THREAD + std::lock_guard<std::mutex> lock (per_bfd->dwo_files_lock); +#endif + + return per_bfd->dwo_files.emplace (std::move (dwo_file)).first->get (); +} + void cutu_reader::create_dwo_unit_hash_tables (dwo_file &dwo_file, dwarf2_cu &skeleton_cu, @@ -6289,7 +6373,7 @@ cutu_reader::create_dwo_unit_hash_tables (dwo_file &dwo_file, else signature = header.signature; - dwo_unit *dwo_unit = OBSTACK_ZALLOC (&per_bfd.obstack, struct dwo_unit); + auto dwo_unit = std::make_unique<struct dwo_unit> (); /* Set the fields common to compile and type units. */ dwo_unit->dwo_file = &dwo_file; @@ -6307,7 +6391,7 @@ cutu_reader::create_dwo_unit_hash_tables (dwo_file &dwo_file, sect_offset_str (sect_off), hex_string (dwo_unit->signature)); - auto [it, inserted] = dwo_file.cus.emplace (dwo_unit); + auto [it, inserted] = dwo_file.cus.emplace (std::move (dwo_unit)); if (!inserted) complaint (_("debug cu entry at offset %s is duplicate to" " the entry at offset %s, signature %s"), @@ -6326,7 +6410,7 @@ cutu_reader::create_dwo_unit_hash_tables (dwo_file &dwo_file, sect_offset_str (sect_off), hex_string (dwo_unit->signature)); - auto [it, inserted] = dwo_file.tus.emplace (dwo_unit); + auto [it, inserted] = dwo_file.tus.emplace (std::move (dwo_unit)); if (!inserted) complaint (_("debug type entry at offset %s is duplicate to" " the entry at offset %s, signature %s"), @@ -6807,7 +6891,7 @@ locate_v1_virtual_dwo_sections (asection *sectp, COMP_DIR is the DW_AT_comp_dir attribute of the referencing CU. This is for DWP version 1 files. */ -static struct dwo_unit * +static dwo_unit_up create_dwo_unit_in_dwp_v1 (dwarf2_per_bfd *per_bfd, struct dwp_file *dwp_file, uint32_t unit_index, @@ -6930,19 +7014,17 @@ create_dwo_unit_in_dwp_v1 (dwarf2_per_bfd *per_bfd, types we'll grow the vector and eventually have to reallocate space for it, invalidating all copies of pointers into the previous contents. */ - auto [it, inserted] - = per_bfd->dwo_files.emplace (std::move (new_dwo_file)); - gdb_assert (inserted); - dwo_file = it->get (); + dwo_file = add_dwo_file (per_bfd, std::move (new_dwo_file)); } else dwarf_read_debug_printf ("Using existing virtual DWO: %s", virtual_dwo_name.c_str ()); - dwo_unit *dwo_unit = OBSTACK_ZALLOC (&per_bfd->obstack, struct dwo_unit); + auto dwo_unit = std::make_unique<struct dwo_unit> (); dwo_unit->dwo_file = dwo_file; dwo_unit->signature = signature; - dwo_unit->section = XOBNEW (&per_bfd->obstack, struct dwarf2_section_info); + dwo_unit->section_holder = std::make_unique<dwarf2_section_info> (); + dwo_unit->section = dwo_unit->section_holder.get (); *dwo_unit->section = sections.info_or_types; /* dwo_unit->{offset,length,type_offset_in_tu} are set later. */ @@ -7000,7 +7082,7 @@ create_dwp_v2_or_v5_section (dwarf2_per_bfd *per_bfd, COMP_DIR is the DW_AT_comp_dir attribute of the referencing CU. This is for DWP version 2 files. */ -static struct dwo_unit * +static dwo_unit_up create_dwo_unit_in_dwp_v2 (dwarf2_per_bfd *per_bfd, struct dwp_file *dwp_file, uint32_t unit_index, @@ -7135,19 +7217,17 @@ create_dwo_unit_in_dwp_v2 (dwarf2_per_bfd *per_bfd, types we'll grow the vector and eventually have to reallocate space for it, invalidating all copies of pointers into the previous contents. */ - auto [it, inserted] - = per_bfd->dwo_files.emplace (std::move (new_dwo_file)); - gdb_assert (inserted); - dwo_file = it->get (); + dwo_file = add_dwo_file (per_bfd, std::move (new_dwo_file)); } else dwarf_read_debug_printf ("Using existing virtual DWO: %s", virtual_dwo_name.c_str ()); - dwo_unit *dwo_unit = OBSTACK_ZALLOC (&per_bfd->obstack, struct dwo_unit); + auto dwo_unit = std::make_unique<struct dwo_unit> (); dwo_unit->dwo_file = dwo_file; dwo_unit->signature = signature; - dwo_unit->section = XOBNEW (&per_bfd->obstack, struct dwarf2_section_info); + dwo_unit->section_holder = std::make_unique<dwarf2_section_info> (); + dwo_unit->section = dwo_unit->section_holder.get (); *dwo_unit->section = create_dwp_v2_or_v5_section (per_bfd, is_debug_types @@ -7165,7 +7245,7 @@ create_dwo_unit_in_dwp_v2 (dwarf2_per_bfd *per_bfd, COMP_DIR is the DW_AT_comp_dir attribute of the referencing CU. This is for DWP version 5 files. */ -static struct dwo_unit * +static dwo_unit_up create_dwo_unit_in_dwp_v5 (dwarf2_per_bfd *per_bfd, struct dwp_file *dwp_file, uint32_t unit_index, @@ -7305,16 +7385,13 @@ create_dwo_unit_in_dwp_v5 (dwarf2_per_bfd *per_bfd, types we'll grow the vector and eventually have to reallocate space for it, invalidating all copies of pointers into the previous contents. */ - auto [it, inserted] - = per_bfd->dwo_files.emplace (std::move (new_dwo_file)); - gdb_assert (inserted); - dwo_file = it->get (); + dwo_file = add_dwo_file (per_bfd, std::move (new_dwo_file)); } else dwarf_read_debug_printf ("Using existing virtual DWO: %s", virtual_dwo_name.c_str ()); - dwo_unit *dwo_unit = OBSTACK_ZALLOC (&per_bfd->obstack, struct dwo_unit); + auto dwo_unit = std::make_unique<struct dwo_unit> (); dwo_unit->dwo_file = dwo_file; dwo_unit->signature = signature; dwo_unit->section @@ -7345,9 +7422,15 @@ lookup_dwo_unit_in_dwp (dwarf2_per_bfd *per_bfd, auto &dwo_unit_set = is_debug_types ? dwp_file->loaded_tus : dwp_file->loaded_cus; - if (auto it = dwo_unit_set.find (signature); - it != dwo_unit_set.end ()) - return *it; + { +#if CXX_STD_THREAD + std::lock_guard<std::mutex> guard (dwp_file->loaded_cutus_lock); +#endif + + if (auto it = dwo_unit_set.find (signature); + it != dwo_unit_set.end ()) + return it->get (); + } /* Use a for loop so that we don't loop forever on bad debug info. */ for (unsigned int i = 0; i < dwp_htab->nr_slots; ++i) @@ -7361,7 +7444,7 @@ lookup_dwo_unit_in_dwp (dwarf2_per_bfd *per_bfd, uint32_t unit_index = read_4_bytes (dbfd, dwp_htab->unit_table + hash * sizeof (uint32_t)); - dwo_unit *dwo_unit; + dwo_unit_up dwo_unit; if (dwp_file->version == 1) dwo_unit @@ -7376,9 +7459,14 @@ lookup_dwo_unit_in_dwp (dwarf2_per_bfd *per_bfd, = create_dwo_unit_in_dwp_v5 (per_bfd, dwp_file, unit_index, comp_dir, signature, is_debug_types); - auto [it, inserted] = dwo_unit_set.emplace (dwo_unit); - gdb_assert (inserted); - return *it; + /* If another thread raced with this one, opening the exact same + DWO unit, then we'll keep that other thread's copy. */ +#if CXX_STD_THREAD + std::lock_guard<std::mutex> guard (dwp_file->loaded_cutus_lock); +#endif + + auto it = dwo_unit_set.emplace (std::move (dwo_unit)).first; + return it->get (); } if (signature_in_table == 0) @@ -7434,7 +7522,7 @@ try_open_dwop_file (dwarf2_per_bfd *per_bfd, const char *file_name, int is_dwp, search_path = per_bfd->captured_debug_dir.c_str (); /* Add the path for the executable binary to the list of search paths. */ - std::string objfile_dir = ldirname (per_bfd->filename ()); + std::string objfile_dir = gdb_ldirname (per_bfd->filename ()); search_path_holder.reset (concat (objfile_dir.c_str (), dirname_separator_string, search_path, nullptr)); @@ -7455,14 +7543,23 @@ try_open_dwop_file (dwarf2_per_bfd *per_bfd, const char *file_name, int is_dwp, if (sym_bfd == NULL) return NULL; - if (!bfd_check_format (sym_bfd.get (), bfd_object)) - return NULL; + { +#if CXX_STD_THREAD + /* The operations below are not thread-safe, use a lock to synchronize + concurrent accesses. */ + static std::mutex mutex; + std::lock_guard<std::mutex> lock (mutex); +#endif - /* Success. Record the bfd as having been included by the objfile's bfd. + if (!bfd_check_format (sym_bfd.get (), bfd_object)) + return NULL; + + /* Success. Record the bfd as having been included by the objfile's bfd. This is important because things like demangled_names_hash lives in the objfile's per_bfd space and may have references to things like symbol names that live in the DWO/DWP file's per_bfd space. PR 16426. */ - gdb_bfd_record_inclusion (per_bfd->obfd, sym_bfd.get ()); + gdb_bfd_record_inclusion (per_bfd->obfd, sym_bfd.get ()); + } return sym_bfd; } @@ -7512,45 +7609,66 @@ cutu_reader::open_dwo_file (dwarf2_per_bfd *per_bfd, const char *file_name, size of each of the DWO debugging sections we are interested in. */ void -cutu_reader::locate_dwo_sections (struct objfile *objfile, bfd *abfd, - asection *sectp, dwo_sections *dwo_sections) +cutu_reader::locate_dwo_sections (objfile *objfile, dwo_file &dwo_file) { const struct dwop_section_names *names = &dwop_section_names; + dwo_sections &dwo_sections = dwo_file.sections; + bool complained_about_macro_already = false; + + for (asection *sec : gdb_bfd_sections (dwo_file.dbfd)) + { + struct dwarf2_section_info *dw_sect = nullptr; + + if (names->abbrev_dwo.matches (sec->name)) + dw_sect = &dwo_sections.abbrev; + else if (names->info_dwo.matches (sec->name)) + dw_sect = &dwo_sections.infos.emplace_back (dwarf2_section_info {}); + else if (names->line_dwo.matches (sec->name)) + dw_sect = &dwo_sections.line; + else if (names->loc_dwo.matches (sec->name)) + dw_sect = &dwo_sections.loc; + else if (names->loclists_dwo.matches (sec->name)) + dw_sect = &dwo_sections.loclists; + else if (names->macinfo_dwo.matches (sec->name)) + dw_sect = &dwo_sections.macinfo; + else if (names->macro_dwo.matches (sec->name)) + { + /* gcc versions <= 13 generate multiple .debug_macro.dwo sections with + some unresolved links between them. It's not usable, so do as if + there were not there. */ + if (!complained_about_macro_already) + { + if (dwo_sections.macro.s.section == nullptr) + dw_sect = &dwo_sections.macro; + else + { + warning (_("Multiple .debug_macro.dwo sections found in " + "%s, ignoring them."), dwo_file.dbfd->filename); - struct dwarf2_section_info *dw_sect = nullptr; - - if (names->abbrev_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->abbrev; - else if (names->info_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->infos.emplace_back (dwarf2_section_info {}); - else if (names->line_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->line; - else if (names->loc_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->loc; - else if (names->loclists_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->loclists; - else if (names->macinfo_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->macinfo; - else if (names->macro_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->macro; - else if (names->rnglists_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->rnglists; - else if (names->str_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->str; - else if (names->str_offsets_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->str_offsets; - else if (names->types_dwo.matches (sectp->name)) - dw_sect = &dwo_sections->types.emplace_back (dwarf2_section_info {}); - - if (dw_sect != nullptr) - { - /* Make sure we don't overwrite a section info that has been filled in + dwo_sections.macro = dwarf2_section_info {}; + complained_about_macro_already = true; + } + } + } + else if (names->rnglists_dwo.matches (sec->name)) + dw_sect = &dwo_sections.rnglists; + else if (names->str_dwo.matches (sec->name)) + dw_sect = &dwo_sections.str; + else if (names->str_offsets_dwo.matches (sec->name)) + dw_sect = &dwo_sections.str_offsets; + else if (names->types_dwo.matches (sec->name)) + dw_sect = &dwo_sections.types.emplace_back (dwarf2_section_info {}); + + if (dw_sect != nullptr) + { + /* Make sure we don't overwrite a section info that has been filled in already. */ - gdb_assert (!dw_sect->readin); + gdb_assert (!dw_sect->readin); - dw_sect->s.section = sectp; - dw_sect->size = bfd_section_size (sectp); - dw_sect->read (objfile); + dw_sect->s.section = sec; + dw_sect->size = bfd_section_size (sec); + dw_sect->read (objfile); + } } } @@ -7578,15 +7696,8 @@ cutu_reader::open_and_init_dwo_file (dwarf2_cu *cu, const char *dwo_name, dwo_file->comp_dir = comp_dir; dwo_file->dbfd = std::move (dbfd); - for (asection *sec : gdb_bfd_sections (dwo_file->dbfd)) - this->locate_dwo_sections (per_objfile->objfile, dwo_file->dbfd.get (), sec, - &dwo_file->sections); + this->locate_dwo_sections (per_objfile->objfile, *dwo_file); - /* There is normally just one .debug_info.dwo section in a DWO file. But when - building with -fdebug-types-section, gcc produces multiple .debug_info.dwo - sections. One for each produced type unit and one for the compile unit. - This is not expected, but we can easily enough deal with what gcc - produces. This behavior has been observed with gcc 14.2.1. */ for (dwarf2_section_info §ion : dwo_file->sections.infos) create_dwo_unit_hash_tables (*dwo_file, *cu, section, ruh_kind::COMPILE); @@ -7788,7 +7899,7 @@ open_and_init_dwp_file (dwarf2_per_objfile *per_objfile) struct objfile *backlink = objfile->separate_debug_objfile_backlink; const char *backlink_basename = lbasename (backlink->original_name); - dwp_name = ldirname (objfile->original_name) + SLASH_STRING + backlink_basename; + dwp_name = gdb_ldirname (objfile->original_name) + SLASH_STRING + backlink_basename; } else dwp_name = objfile->original_name; @@ -7938,12 +8049,7 @@ cutu_reader::lookup_dwo_cutu (dwarf2_cu *cu, const char *dwo_name, = open_and_init_dwo_file (cu, dwo_name, comp_dir); if (new_dwo_file != nullptr) - { - auto [it, inserted] - = per_bfd->dwo_files.emplace (std::move (new_dwo_file)); - gdb_assert (inserted); - dwo_file = (*it).get (); - } + dwo_file = add_dwo_file (per_bfd, std::move (new_dwo_file)); } if (dwo_file != NULL) @@ -7954,13 +8060,13 @@ cutu_reader::lookup_dwo_cutu (dwarf2_cu *cu, const char *dwo_name, { if (auto it = dwo_file->tus.find (signature); it != dwo_file->tus.end ()) - dwo_cutu = *it; + dwo_cutu = it->get (); } else if (!is_debug_types && !dwo_file->cus.empty ()) { if (auto it = dwo_file->cus.find (signature); it != dwo_file->cus.end ()) - dwo_cutu = *it; + dwo_cutu = it->get (); } if (dwo_cutu != NULL) @@ -8067,8 +8173,8 @@ queue_and_load_all_dwo_tus (dwarf2_cu *cu) dwo_file = dwo_unit->dwo_file; - for (struct dwo_unit *unit : dwo_file->tus) - queue_and_load_dwo_tu (unit, cu); + for (const dwo_unit_up &unit : dwo_file->tus) + queue_and_load_dwo_tu (unit.get (), cu); } /* Read in various DIEs. */ @@ -9875,33 +9981,37 @@ static void handle_member_location (struct die_info *die, struct dwarf2_cu *cu, struct field *field) { - struct attribute *attr; + const auto data_member_location_attr + = dwarf2_attr (die, DW_AT_data_member_location, cu); - attr = dwarf2_attr (die, DW_AT_data_member_location, cu); - if (attr != NULL) + if (data_member_location_attr != nullptr) { bool has_bit_offset = false; LONGEST bit_offset = 0; LONGEST anonymous_size = 0; + const auto bit_offset_attr = dwarf2_attr (die, DW_AT_bit_offset, cu); - attribute *attr2 = dwarf2_attr (die, DW_AT_bit_offset, cu); - if (attr2 != nullptr && attr2->form_is_constant ()) + if (bit_offset_attr != nullptr && bit_offset_attr->form_is_constant ()) { has_bit_offset = true; - bit_offset = attr2->unsigned_constant ().value_or (0); - attr2 = dwarf2_attr (die, DW_AT_byte_size, cu); - if (attr2 != nullptr && attr2->form_is_constant ()) + bit_offset = bit_offset_attr->confused_constant ().value_or (0); + + const auto byte_size_attr = dwarf2_attr (die, DW_AT_byte_size, cu); + + if (byte_size_attr != nullptr && byte_size_attr->form_is_constant ()) { /* The size of the anonymous object containing the bit field is explicit, so use the indicated size (in bytes). */ - anonymous_size = attr2->unsigned_constant ().value_or (0); + anonymous_size + = byte_size_attr->unsigned_constant ().value_or (0); } } - if (attr->form_is_constant ()) + if (data_member_location_attr->form_is_constant ()) { - LONGEST offset = attr->unsigned_constant ().value_or (0); + LONGEST offset + = data_member_location_attr->confused_constant ().value_or (0); /* Work around this GCC 11 bug, where it would erroneously use -1 data member locations, instead of 0: @@ -9919,11 +10029,17 @@ handle_member_location (struct die_info *die, struct dwarf2_cu *cu, if (has_bit_offset) apply_bit_offset_to_field (*field, bit_offset, anonymous_size); } - else if (attr->form_is_block ()) + else if (data_member_location_attr->form_is_block ()) { CORE_ADDR offset; - if (decode_locdesc (attr->as_block (), cu, &offset)) - field->set_loc_bitpos (offset * bits_per_byte); + if (decode_locdesc (data_member_location_attr->as_block (), cu, + &offset)) + { + field->set_loc_bitpos (offset * bits_per_byte); + + if (has_bit_offset) + apply_bit_offset_to_field (*field, bit_offset, anonymous_size); + } else { dwarf2_per_objfile *per_objfile = cu->per_objfile; @@ -9942,8 +10058,8 @@ handle_member_location (struct die_info *die, struct dwarf2_cu *cu, else dlbaton = OBSTACK_ZALLOC (&objfile->objfile_obstack, struct dwarf2_locexpr_baton); - dlbaton->data = attr->as_block ()->data; - dlbaton->size = attr->as_block ()->size; + dlbaton->data = data_member_location_attr->as_block ()->data; + dlbaton->size = data_member_location_attr->as_block ()->size; /* When using this baton, we want to compute the address of the field, not the value. This is why is_reference is set to false here. */ @@ -9951,21 +10067,68 @@ handle_member_location (struct die_info *die, struct dwarf2_cu *cu, dlbaton->per_objfile = per_objfile; dlbaton->per_cu = cu->per_cu; - field->set_loc_dwarf_block (dlbaton); + field->set_loc_dwarf_block_addr (dlbaton); } } else complaint (_("Unsupported form %s for DW_AT_data_member_location"), - dwarf_form_name (attr->form)); + dwarf_form_name (data_member_location_attr->form)); } else { - attr = dwarf2_attr (die, DW_AT_data_bit_offset, cu); - if (attr != nullptr) - field->set_loc_bitpos (attr->unsigned_constant ().value_or (0)); + const auto data_bit_offset_attr + = dwarf2_attr (die, DW_AT_data_bit_offset, cu); + + if (data_bit_offset_attr != nullptr) + { + if (data_bit_offset_attr->form_is_constant ()) + field->set_loc_bitpos (data_bit_offset_attr->unsigned_constant () + .value_or (0)); + else if (data_bit_offset_attr->form_is_block ()) + { + /* This is a DWARF extension. See + https://dwarfstd.org/issues/250501.1.html. */ + dwarf2_per_objfile *per_objfile = cu->per_objfile; + dwarf2_locexpr_baton *dlbaton + = OBSTACK_ZALLOC (&per_objfile->objfile->objfile_obstack, + dwarf2_locexpr_baton); + dlbaton->data = data_bit_offset_attr->as_block ()->data; + dlbaton->size = data_bit_offset_attr->as_block ()->size; + dlbaton->per_objfile = per_objfile; + dlbaton->per_cu = cu->per_cu; + + field->set_loc_dwarf_block_bitpos (dlbaton); + } + else + complaint (_("Unsupported form %s for DW_AT_data_bit_offset"), + dwarf_form_name (data_bit_offset_attr->form)); + } } } +/* A helper that computes the location of a field. The CU and the + DW_TAG_member DIE are passed in. The results are stored in + *FP. */ + +static void +compute_field_location (dwarf2_cu *cu, die_info *die, field *fp) +{ + /* Get type of field. */ + fp->set_type (die_type (die, cu)); + + fp->set_loc_bitpos (0); + + /* Get bit size of field (zero if none). */ + attribute *attr = dwarf2_attr (die, DW_AT_bit_size, cu); + if (attr != nullptr) + fp->set_bitsize (attr->unsigned_constant ().value_or (0)); + else + fp->set_bitsize (0); + + /* Get bit offset of field. */ + handle_member_location (die, cu, fp); +} + /* Add an aggregate field to the field list. */ static void @@ -10021,20 +10184,7 @@ dwarf2_add_field (struct field_info *fip, struct die_info *die, } /* Data member other than a C++ static data member. */ - /* Get type of field. */ - fp->set_type (die_type (die, cu)); - - fp->set_loc_bitpos (0); - - /* Get bit size of field (zero if none). */ - attr = dwarf2_attr (die, DW_AT_bit_size, cu); - if (attr != nullptr) - fp->set_bitsize (attr->unsigned_constant ().value_or (0)); - else - fp->set_bitsize (0); - - /* Get bit offset of field. */ - handle_member_location (die, cu, fp); + compute_field_location (cu, die, fp); /* Get name of field. */ fieldname = dwarf2_name (die, cu); @@ -10482,7 +10632,6 @@ dwarf2_add_member_fn (struct field_info *fip, struct die_info *die, smash_to_method_type (fnp->type, type, this_type->target_type (), this_type->fields (), - this_type->num_fields (), this_type->has_varargs ()); /* Handle static member functions. @@ -10704,8 +10853,7 @@ quirk_gcc_member_function_pointer (struct type *type, struct objfile *objfile) self_type = pfn_type->field (0).type ()->target_type (); new_type = type_allocator (type).new_type (); smash_to_method_type (new_type, self_type, pfn_type->target_type (), - pfn_type->fields (), pfn_type->num_fields (), - pfn_type->has_varargs ()); + pfn_type->fields (), pfn_type->has_varargs ()); smash_to_methodptr_type (type, new_type); } @@ -11213,54 +11361,19 @@ handle_struct_member_die (struct die_info *child_die, struct type *type, handle_variant (child_die, type, fi, template_args, cu); } -/* Create a property baton for a field of the struct type currently - being processed. OFFSET is the DIE offset of the field in the - structure. If OFFSET is found among the fields that have already - been seen, then a new property baton is allocated on the objfile - obstack and returned. The baton isn't fully filled in -- it will - be post-processed once the fields are finally created; see - update_field_batons. If OFFSET is not found, NULL is returned. */ +/* Create a property baton for a field. DIE is the field's DIE. The + baton's "field" member is filled in, but the other members of the + baton are not. The new property baton is returned. */ static dwarf2_property_baton * -find_field_create_baton (dwarf2_cu *cu, sect_offset offset) +find_field_create_baton (dwarf2_cu *cu, die_info *die) { - field_info *fi = cu->field_info; - /* Defensive programming in case we see unusual DWARF. */ - if (fi == nullptr) - return nullptr; - for (const auto &fld : fi->fields) - if (fld.offset == offset) - { - dwarf2_property_baton *result - = XOBNEW (&cu->per_objfile->objfile->objfile_obstack, - struct dwarf2_property_baton); - fi->field_batons[result] = offset; - return result; - } - return nullptr; -} - -/* Update all the stored field property batons. FI is the field info - for the structure being created. TYPE is the corresponding struct - type with its fields already filled in. This fills in the correct - field for each baton that was stored while processing this - type. */ - -static void -update_field_batons (field_info *fi, struct type *type) -{ - int n_bases = fi->baseclasses.size (); - for (auto &[baton, offset] : fi->field_batons) - { - for (int i = 0; i < fi->fields.size (); ++i) - { - if (fi->fields[i].offset == offset) - { - baton->field = &type->field (n_bases + i); - break; - } - } - } + dwarf2_property_baton *result + = XOBNEW (&cu->per_objfile->objfile->objfile_obstack, + struct dwarf2_property_baton); + memset (&result->field, 0, sizeof (result->field)); + compute_field_location (cu, die, &result->field); + return result; } /* Finish creating a structure or union type, including filling in its @@ -11284,9 +11397,6 @@ process_structure_scope (struct die_info *die, struct dwarf2_cu *cu) struct field_info fi; std::vector<struct symbol *> template_args; - scoped_restore save_field_info - = make_scoped_restore (&cu->field_info, &fi); - for (die_info *child_die : die->children ()) handle_struct_member_die (child_die, type, &fi, &template_args, cu); @@ -11308,11 +11418,7 @@ process_structure_scope (struct die_info *die, struct dwarf2_cu *cu) /* Attach fields and member functions to the type. */ if (fi.nfields () > 0) - { - dwarf2_attach_fields_to_type (&fi, type, cu); - update_field_batons (&fi, type); - } - + dwarf2_attach_fields_to_type (&fi, type, cu); if (!fi.fnfieldlists.empty ()) { dwarf2_attach_fn_fields_to_type (&fi, type, cu); @@ -12306,7 +12412,7 @@ mark_common_block_symbol_computed (struct symbol *sym, gdb_assert (ptr - baton->data == baton->size); SYMBOL_LOCATION_BATON (sym) = baton; - sym->set_aclass_index (dwarf2_locexpr_index); + sym->set_loc_class_index (dwarf2_locexpr_index); } /* Create appropriate locally-scoped variables for all the @@ -12668,8 +12774,7 @@ read_tag_ptr_to_member_type (struct die_info *die, struct dwarf2_cu *cu) = type_allocator (cu->per_objfile->objfile, cu->lang ()).new_type (); smash_to_method_type (new_type, domain, to_type->target_type (), - to_type->fields (), to_type->num_fields (), - to_type->has_varargs ()); + to_type->fields (), to_type->has_varargs ()); type = lookup_methodptr_type (new_type); } else @@ -13927,13 +14032,12 @@ attr_to_dynamic_prop (const struct attribute *attr, struct die_info *die, case DW_AT_data_member_location: case DW_AT_data_bit_offset: { - baton = find_field_create_baton (cu, target_die->sect_off); + baton = find_field_create_baton (cu, target_die); if (baton == nullptr) return 0; baton->property_type = read_type_die (target_die->parent, target_cu); - baton->field = nullptr; prop->set_field (baton); break; } @@ -16555,7 +16659,7 @@ var_decode_location (struct attribute *attr, struct symbol *sym, variable has been optimized away. */ if (attr->form_is_block () && attr->as_block ()->size == 0) { - sym->set_aclass_index (LOC_OPTIMIZED_OUT); + sym->set_loc_class_index (LOC_OPTIMIZED_OUT); return; } @@ -16585,7 +16689,7 @@ var_decode_location (struct attribute *attr, struct symbol *sym, else tem = read_addr_index_from_leb128 (cu, block->data + 1, &dummy); sym->set_value_address ((CORE_ADDR) tem); - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); fixup_symbol_section (sym, objfile); sym->set_value_address (sym->value_address () @@ -16622,7 +16726,7 @@ add_ada_export_symbol (struct symbol *orig, const char *new_name, = new (&cu->per_objfile->objfile->objfile_obstack) symbol (*orig); copy->set_linkage_name (new_name); SYMBOL_LOCATION_BATON (copy) = (void *) orig_name; - copy->set_aclass_index (copy->aclass () == LOC_BLOCK + copy->set_loc_class_index (copy->loc_class () == LOC_BLOCK ? ada_block_index : ada_imported_index); add_symbol_to_list (copy, list_to_add); @@ -16722,7 +16826,7 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, /* Default assumptions. Use the passed type or decode it from the die. */ sym->set_domain (UNDEF_DOMAIN); - sym->set_aclass_index (LOC_OPTIMIZED_OUT); + sym->set_loc_class_index (LOC_OPTIMIZED_OUT); if (type != NULL) sym->set_type (type); else @@ -16772,10 +16876,10 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, CORE_ADDR addr = per_objfile->relocate (attr->as_address ()); sym->set_section_index (SECT_OFF_TEXT (objfile)); sym->set_value_address (addr); - sym->set_aclass_index (LOC_LABEL); + sym->set_loc_class_index (LOC_LABEL); } else - sym->set_aclass_index (LOC_OPTIMIZED_OUT); + sym->set_loc_class_index (LOC_OPTIMIZED_OUT); sym->set_type (builtin_type (objfile)->builtin_core_addr); sym->set_domain (LABEL_DOMAIN); list_to_add = cu->list_in_scope; @@ -16784,7 +16888,7 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, /* SYMBOL_BLOCK_VALUE (sym) will be filled in later by finish_block. */ sym->set_domain (FUNCTION_DOMAIN); - sym->set_aclass_index (LOC_BLOCK); + sym->set_loc_class_index (LOC_BLOCK); /* DW_TAG_entry_point provides an additional entry_point to an existing sub_program. Therefore, we inherit the "external" attribute from the sub_program to which the entry_point @@ -16799,7 +16903,7 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, /* SYMBOL_BLOCK_VALUE (sym) will be filled in later by finish_block. */ sym->set_domain (FUNCTION_DOMAIN); - sym->set_aclass_index (LOC_BLOCK); + sym->set_loc_class_index (LOC_BLOCK); attr2 = dwarf2_attr (die, DW_AT_external, cu); if ((attr2 != nullptr && attr2->as_boolean ()) || cu->lang () == language_ada @@ -16828,7 +16932,7 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, /* For Import, create a symbol using the source name, and have it refer to the linkage name. */ SYMBOL_LOCATION_BATON (sym) = (void *) linkagename; - sym->set_aclass_index (ada_block_index); + sym->set_loc_class_index (ada_block_index); } else { @@ -16844,7 +16948,7 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, /* SYMBOL_BLOCK_VALUE (sym) will be filled in later by finish_block. */ sym->set_domain (FUNCTION_DOMAIN); - sym->set_aclass_index (LOC_BLOCK); + sym->set_loc_class_index (LOC_BLOCK); sym->set_is_inlined (1); list_to_add = cu->list_in_scope; break; @@ -16896,7 +17000,7 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, && die->parent->tag == DW_TAG_common_block) attr2 = NULL; - if (sym->aclass () == LOC_STATIC + if (sym->loc_class () == LOC_STATIC && sym->value_address () == 0 && !per_objfile->per_bfd->has_section_at_zero) { @@ -16907,7 +17011,7 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, } else if (attr2 != nullptr && attr2->as_boolean ()) { - if (sym->aclass () == LOC_STATIC + if (sym->loc_class () == LOC_STATIC && (objfile->flags & OBJF_MAINLINE) == 0 && per_objfile->per_bfd->can_copy) { @@ -16976,7 +17080,7 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, ? cu->get_builder ()->get_global_symbols () : cu->list_in_scope); SYMBOL_LOCATION_BATON (sym) = (void *) linkagename; - sym->set_aclass_index (ada_imported_index); + sym->set_loc_class_index (ada_imported_index); } else if (attr2 != nullptr && attr2->as_boolean () && dwarf2_attr (die, DW_AT_type, cu) != NULL) @@ -16989,12 +17093,12 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, ? cu->get_builder ()->get_global_symbols () : cu->list_in_scope); - sym->set_aclass_index (LOC_UNRESOLVED); + sym->set_loc_class_index (LOC_UNRESOLVED); } else if (!die_is_declaration (die, cu)) { /* Use the default LOC_OPTIMIZED_OUT class. */ - gdb_assert (sym->aclass () == LOC_OPTIMIZED_OUT); + gdb_assert (sym->loc_class () == LOC_OPTIMIZED_OUT); if (!suppress_add) list_to_add = cu->list_in_scope; } @@ -17050,13 +17154,13 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, there's a special hack for C++ in the matching code, so we don't need to enter a separate typedef for the tag. */ - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_domain (STRUCT_DOMAIN); } else { /* Other languages don't have a tag namespace. */ - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_domain (TYPE_DOMAIN); } @@ -17101,7 +17205,7 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, case DW_TAG_base_type: case DW_TAG_subrange_type: case DW_TAG_generic_subrange: - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_domain (TYPE_DOMAIN); list_to_add = cu->list_in_scope; break; @@ -17125,21 +17229,21 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, case DW_TAG_imported_declaration: case DW_TAG_namespace: sym->set_domain (TYPE_DOMAIN); - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); list_to_add = cu->get_builder ()->get_global_symbols (); break; case DW_TAG_module: - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_domain (MODULE_DOMAIN); list_to_add = cu->get_builder ()->get_global_symbols (); break; case DW_TAG_common_block: - sym->set_aclass_index (LOC_COMMON_BLOCK); + sym->set_loc_class_index (LOC_COMMON_BLOCK); sym->set_domain (COMMON_BLOCK_DOMAIN); list_to_add = cu->list_in_scope; break; case DW_TAG_namelist: - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); sym->set_domain (VAR_DOMAIN); list_to_add = cu->list_in_scope; break; @@ -17172,29 +17276,6 @@ new_symbol (struct die_info *die, struct type *type, struct dwarf2_cu *cu, return (sym); } -/* Given an attr with a DW_FORM_dataN value in host byte order, - zero-extend it as appropriate for the symbol's type. The DWARF - standard (v4) is not entirely clear about the meaning of using - DW_FORM_dataN for a constant with a signed type, where the type is - wider than the data. The conclusion of a discussion on the DWARF - list was that this is unspecified. We choose to always zero-extend - because that is the interpretation long in use by GCC. */ - -static void -dwarf2_const_value_data (const struct attribute *attr, LONGEST *value, - int bits) -{ - LONGEST l = attr->constant_value (0); - - if (bits < sizeof (*value) * 8) - { - l &= ((LONGEST) 1 << bits) - 1; - *value = l; - } - else - *value = l; -} - /* Read a constant value from an attribute. Either set *VALUE, or if the value does not fit in *VALUE, set *BYTES - either already allocated on the objfile obstack, or newly allocated on OBSTACK, @@ -17278,25 +17359,13 @@ dwarf2_const_value_attr (const struct attribute *attr, struct type *type, converted to host endianness, so we just need to sign- or zero-extend it as appropriate. */ case DW_FORM_data1: - dwarf2_const_value_data (attr, value, 8); - break; case DW_FORM_data2: - dwarf2_const_value_data (attr, value, 16); - break; case DW_FORM_data4: - dwarf2_const_value_data (attr, value, 32); - break; case DW_FORM_data8: - dwarf2_const_value_data (attr, value, 64); - break; - case DW_FORM_sdata: case DW_FORM_implicit_const: - *value = attr->as_signed (); - break; - case DW_FORM_udata: - *value = attr->as_unsigned (); + *value = attr->confused_constant ().value_or (0); break; default: @@ -17327,17 +17396,17 @@ dwarf2_const_value (const struct attribute *attr, struct symbol *sym, if (baton != NULL) { SYMBOL_LOCATION_BATON (sym) = baton; - sym->set_aclass_index (dwarf2_locexpr_index); + sym->set_loc_class_index (dwarf2_locexpr_index); } else if (bytes != NULL) { sym->set_value_bytes (bytes); - sym->set_aclass_index (LOC_CONST_BYTES); + sym->set_loc_class_index (LOC_CONST_BYTES); } else { sym->set_value_longest (value); - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); } } @@ -17463,9 +17532,10 @@ lookup_die_type (struct die_info *die, const struct attribute *attr, if (attr->form_is_alt ()) { + const auto §ion = get_section_for_ref (*attr, cu); sect_offset sect_off = attr->get_ref_die_offset (); dwarf2_per_cu *per_cu - = dwarf2_find_containing_comp_unit (sect_off, 1, per_objfile->per_bfd); + = dwarf2_find_containing_unit ({ §ion, sect_off }, per_objfile); this_type = get_die_type_at_offset (sect_off, per_cu, per_objfile); } @@ -18166,14 +18236,13 @@ follow_die_ref_or_sig (struct die_info *src_die, const struct attribute *attr, return die; } -/* Follow reference OFFSET. - On entry *REF_CU is the CU of the source die referencing OFFSET. +/* Follow reference TARGET. + On entry *REF_CU is the CU of the source die referencing TARGET. On exit *REF_CU is the CU of the result. - Returns NULL if OFFSET is invalid. */ + Returns nullptr if TARGET is invalid. */ -static struct die_info * -follow_die_offset (sect_offset sect_off, int offset_in_dwz, - struct dwarf2_cu **ref_cu) +static die_info * +follow_die_offset (const section_and_offset &target, dwarf2_cu **ref_cu) { dwarf2_cu *source_cu = *ref_cu; dwarf2_cu *target_cu = source_cu; @@ -18185,23 +18254,23 @@ follow_die_offset (sect_offset sect_off, int offset_in_dwz, dwarf_read_debug_printf_v ("source CU offset: %s, target offset: %s, " "source CU contains target offset: %d", sect_offset_str (source_cu->per_cu->sect_off), - sect_offset_str (sect_off), - source_cu->header.offset_in_unit_p (sect_off)); + sect_offset_str (target.offset), + (target.section == &source_cu->section () + && source_cu->header.offset_in_unit_p (target.offset))); if (source_cu->per_cu->is_debug_types) { /* .debug_types CUs cannot reference anything outside their CU. If they need to, they have to reference a signatured type via DW_FORM_ref_sig8. */ - if (!source_cu->header.offset_in_unit_p (sect_off)) + if (!source_cu->header.offset_in_unit_p (target.offset)) return NULL; } - else if (offset_in_dwz != source_cu->per_cu->is_dwz - || !source_cu->header.offset_in_unit_p (sect_off)) + else if (target.section != &source_cu->section () + || !source_cu->header.offset_in_unit_p (target.offset)) { dwarf2_per_cu *target_per_cu - = dwarf2_find_containing_comp_unit (sect_off, offset_in_dwz, - per_objfile->per_bfd); + = dwarf2_find_containing_unit (target, per_objfile); dwarf_read_debug_printf_v ("target CU offset: %s, " "target CU DIEs loaded: %d", @@ -18223,13 +18292,13 @@ follow_die_offset (sect_offset sect_off, int offset_in_dwz, error (_(DWARF_ERROR_PREFIX "cannot follow reference to DIE at %s" " [in module %s]"), - sect_offset_str (sect_off), + sect_offset_str (target.offset), objfile_name (per_objfile->objfile)); } *ref_cu = target_cu; - return target_cu->find_die (sect_off); + return target_cu->find_die (target.offset); } /* Follow reference attribute ATTR of SRC_DIE. @@ -18241,8 +18310,7 @@ follow_die_ref (struct die_info *src_die, const struct attribute *attr, struct dwarf2_cu **ref_cu) { sect_offset sect_off = attr->get_ref_die_offset (); - struct dwarf2_cu *cu = *ref_cu; - struct die_info *die; + struct dwarf2_cu *src_cu = *ref_cu; if (!attr->form_is_alt () && src_die->sect_off == sect_off) { @@ -18250,14 +18318,13 @@ follow_die_ref (struct die_info *src_die, const struct attribute *attr, return src_die; } - die = follow_die_offset (sect_off, - attr->form_is_alt () || cu->per_cu->is_dwz, - ref_cu); - if (!die) + const dwarf2_section_info §ion = get_section_for_ref (*attr, src_cu); + die_info *die = follow_die_offset ({ §ion, sect_off }, ref_cu); + if (die == nullptr) error (_(DWARF_ERROR_PREFIX "Cannot find DIE at %s referenced from DIE at %s [in module %s]"), sect_offset_str (sect_off), sect_offset_str (src_die->sect_off), - objfile_name (cu->per_objfile->objfile)); + objfile_name (src_cu->per_objfile->objfile)); return die; } @@ -18270,7 +18337,6 @@ dwarf2_fetch_die_loc_sect_off (sect_offset sect_off, dwarf2_per_cu *per_cu, gdb::function_view<CORE_ADDR ()> get_frame_pc, bool resolve_abstract_p) { - struct die_info *die; struct attribute *attr; struct dwarf2_locexpr_baton retval; struct objfile *objfile = per_objfile->objfile; @@ -18288,8 +18354,8 @@ dwarf2_fetch_die_loc_sect_off (sect_offset sect_off, dwarf2_per_cu *per_cu, sect_offset_str (sect_off), objfile_name (objfile)); } - die = follow_die_offset (sect_off, per_cu->is_dwz, &cu); - if (!die) + die_info *die = follow_die_offset ({ &cu->section (), sect_off }, &cu); + if (die == nullptr) error (_(DWARF_ERROR_PREFIX "Cannot find DIE at %s referenced [in module %s]"), sect_offset_str (sect_off), objfile_name (objfile)); @@ -18305,8 +18371,8 @@ dwarf2_fetch_die_loc_sect_off (sect_offset sect_off, dwarf2_per_cu *per_cu, : per_objfile->per_bfd->abstract_to_concrete[die->sect_off]) { struct dwarf2_cu *cand_cu = cu; - struct die_info *cand - = follow_die_offset (cand_off, per_cu->is_dwz, &cand_cu); + die_info *cand + = follow_die_offset ({ &cu->section (), cand_off }, &cand_cu); if (!cand || !cand->parent || cand->parent->tag != DW_TAG_subprogram) @@ -18408,7 +18474,6 @@ dwarf2_fetch_constant_bytes (sect_offset sect_off, obstack *obstack, LONGEST *len) { - struct die_info *die; struct attribute *attr; const gdb_byte *result = NULL; struct type *type; @@ -18429,7 +18494,7 @@ dwarf2_fetch_constant_bytes (sect_offset sect_off, sect_offset_str (sect_off), objfile_name (objfile)); } - die = follow_die_offset (sect_off, per_cu->is_dwz, &cu); + die_info *die = follow_die_offset ({ &cu->section (), sect_off }, &cu); if (!die) error (_(DWARF_ERROR_PREFIX "Cannot find DIE at %s referenced [in module %s]"), @@ -18488,39 +18553,19 @@ dwarf2_fetch_constant_bytes (sect_offset sect_off, symbol's value "represented as it would be on the target architecture." By the time we get here, it's already been converted to host endianness, so we just need to sign- or - zero-extend it as appropriate. */ + zero-extend it as appropriate. + + Both GCC and LLVM agree that these are always signed, though. */ case DW_FORM_data1: - type = die_type (die, cu); - dwarf2_const_value_data (attr, &value, 8); - result = write_constant_as_bytes (obstack, byte_order, type, value, len); - break; case DW_FORM_data2: - type = die_type (die, cu); - dwarf2_const_value_data (attr, &value, 16); - result = write_constant_as_bytes (obstack, byte_order, type, value, len); - break; case DW_FORM_data4: - type = die_type (die, cu); - dwarf2_const_value_data (attr, &value, 32); - result = write_constant_as_bytes (obstack, byte_order, type, value, len); - break; case DW_FORM_data8: - type = die_type (die, cu); - dwarf2_const_value_data (attr, &value, 64); - result = write_constant_as_bytes (obstack, byte_order, type, value, len); - break; - case DW_FORM_sdata: case DW_FORM_implicit_const: - type = die_type (die, cu); - result = write_constant_as_bytes (obstack, byte_order, - type, attr->as_signed (), len); - break; - case DW_FORM_udata: type = die_type (die, cu); - result = write_constant_as_bytes (obstack, byte_order, - type, attr->as_unsigned (), len); + value = attr->confused_constant ().value_or (0); + result = write_constant_as_bytes (obstack, byte_order, type, value, len); break; default: @@ -18539,8 +18584,6 @@ dwarf2_fetch_die_type_sect_off (sect_offset sect_off, dwarf2_per_cu *per_cu, dwarf2_per_objfile *per_objfile, const char **var_name) { - struct die_info *die; - dwarf2_cu *cu = per_objfile->get_cu (per_cu); if (cu == nullptr) cu = load_cu (per_cu, per_objfile, false); @@ -18548,7 +18591,7 @@ dwarf2_fetch_die_type_sect_off (sect_offset sect_off, dwarf2_per_cu *per_cu, if (cu == nullptr) return nullptr; - die = follow_die_offset (sect_off, per_cu->is_dwz, &cu); + die_info *die = follow_die_offset ({ &cu->section (), sect_off }, &cu); if (!die) return NULL; @@ -18934,7 +18977,7 @@ decode_locdesc (struct dwarf_block *blk, struct dwarf2_cu *cu, case DW_OP_deref: /* If we're not the last op, then we definitely can't encode - this using GDB's address_class enum. This is valid for partial + this using GDB's location_class enum. This is valid for partial global symbols, although the variable's address will be bogus in the psymtab. */ if (i < size) @@ -19176,7 +19219,7 @@ dwarf2_symbol_mark_computed (const struct attribute *attr, struct symbol *sym, complaint (_("Location list used without " "specifying the CU base address.")); - sym->set_aclass_index ((is_block + sym->set_loc_class_index ((is_block ? dwarf2_loclist_block_index : dwarf2_loclist_index)); SYMBOL_LOCATION_BATON (sym) = baton; @@ -19209,7 +19252,7 @@ dwarf2_symbol_mark_computed (const struct attribute *attr, struct symbol *sym, baton->size = 0; } - sym->set_aclass_index ((is_block + sym->set_loc_class_index ((is_block ? dwarf2_locexpr_block_index : dwarf2_locexpr_index)); SYMBOL_LOCATION_BATON (sym) = baton; @@ -19298,69 +19341,115 @@ dwarf2_per_cu::ensure_lang (dwarf2_per_objfile *per_objfile) true, language_minimal, nullptr); } -/* A helper function for dwarf2_find_containing_comp_unit that returns - the index of the result, and that searches a vector. It will - return a result even if the offset in question does not actually - occur in any CU. This is separate so that it can be unit - tested. */ +/* Return the unit from ALL_UNITS that potentially contains TARGET. -static int -dwarf2_find_containing_comp_unit - (sect_offset sect_off, - unsigned int offset_in_dwz, - const std::vector<dwarf2_per_cu_up> &all_units) + Since the unit lengths may not be known yet, this function doesn't check that + TARGET.OFFSET actually falls within the range of the returned unit. The + caller is responsible for this. + + If no units possibly match TARGET, return nullptr. */ + +static dwarf2_per_cu * +dwarf2_find_containing_unit (const section_and_offset &target, + const std::vector<dwarf2_per_cu_up> &all_units) { - int low, high; + auto it = std::lower_bound (all_units.begin (), all_units.end (), target, + [] (const dwarf2_per_cu_up &per_cu, + const section_and_offset &key) + { + return all_units_less_than (*per_cu, key); + }); - low = 0; - high = all_units.size () - 1; - while (high > low) + if (it == all_units.begin ()) { - int mid = low + (high - low) / 2; - dwarf2_per_cu *mid_cu = all_units[mid].get (); - - if (mid_cu->is_dwz > offset_in_dwz - || (mid_cu->is_dwz == offset_in_dwz - && mid_cu->sect_off + mid_cu->length () > sect_off)) - high = mid; + /* TARGET falls before the first unit of the first section, or is an + exact match with the first. */ + if ((*it)->section == target.section && (*it)->sect_off == target.offset) + return it->get (); else - low = mid + 1; + return nullptr; + } + + if (it != all_units.end () + && (*it)->section == target.section + && (*it)->sect_off == target.offset) + { + /* TARGET is an exact match with the start of *IT, so *IT is what we're + looking for. */ + return it->get (); } - gdb_assert (low == high); - return low; + + /* Otherwise, the match is the one just before, as long as it matches the + section we're looking for. */ + --it; + + if ((*it)->section == target.section) + return it->get (); + + return nullptr; } /* See read.h. */ dwarf2_per_cu * -dwarf2_find_containing_comp_unit (sect_offset sect_off, - unsigned int offset_in_dwz, - dwarf2_per_bfd *per_bfd) +dwarf2_find_containing_unit (const section_and_offset &target, + dwarf2_per_objfile *per_objfile) { - int low = dwarf2_find_containing_comp_unit - (sect_off, offset_in_dwz, per_bfd->all_units); - dwarf2_per_cu *this_cu = per_bfd->all_units[low].get (); - - if (this_cu->is_dwz != offset_in_dwz || this_cu->sect_off > sect_off) + dwarf2_per_bfd *per_bfd = per_objfile->per_bfd; + dwarf2_per_cu *per_cu + = dwarf2_find_containing_unit (target, per_bfd->all_units); + auto error_out = [&target, per_bfd] () { - if (low == 0 || this_cu->is_dwz != offset_in_dwz) - error (_(DWARF_ERROR_PREFIX - "could not find CU containing offset %s [in module %s]"), - sect_offset_str (sect_off), - per_bfd->filename ()); + error (_(DWARF_ERROR_PREFIX + "could not find unit containing offset %s [in module %s]"), + sect_offset_str (target.offset), per_bfd->filename ()); + }; - gdb_assert (per_bfd->all_units[low-1]->sect_off - <= sect_off); - return per_bfd->all_units[low - 1].get (); - } - else - { - if (low == per_bfd->all_units.size () - 1 - && sect_off >= this_cu->sect_off + this_cu->length ()) - error (_("invalid dwarf2 offset %s"), sect_offset_str (sect_off)); - gdb_assert (sect_off < this_cu->sect_off + this_cu->length ()); - return this_cu; - } + if (per_cu == nullptr) + error_out (); + + gdb_assert (per_cu->section == target.section); + + /* Some producers of dwarf2_per_cu objects (thinking of the .gdb_index reader) + do not set the length ahead of time. The length is needed to check if + the target is truly within PER_CU's range, so compute it now. Constructing + the cutu_reader object has the side-effect of setting PER_CU's length. + Even though it should happen too often, it could be replaced with + something more lightweight that has the same effect. */ + if (!per_cu->length_is_set ()) + cutu_reader (*per_cu, *per_objfile, nullptr, nullptr, false, + language_minimal); + + /* Now we can check if the target section offset is within PER_CU's range. */ + if (target.offset < per_cu->sect_off + || target.offset >= per_cu->sect_off + per_cu->length ()) + error_out (); + + return per_cu; +} + +/* See read.h. */ + +dwarf2_per_cu * +dwarf2_find_unit (const section_and_offset &start, dwarf2_per_bfd *per_bfd) +{ + auto it = std::lower_bound (per_bfd->all_units.begin (), + per_bfd->all_units.end (), start, + [] (const dwarf2_per_cu_up &per_cu, + const section_and_offset &key) + { + return all_units_less_than (*per_cu, key); + }); + + if (it == per_bfd->all_units.end ()) + return nullptr; + + dwarf2_per_cu *per_cu = it->get (); + + if (per_cu->section != start.section || per_cu->sect_off != start.offset) + return nullptr; + + return per_cu; } #if GDB_SELF_TEST @@ -19371,59 +19460,55 @@ namespace find_containing_comp_unit { static void run_test () { - char dummy_per_bfd; - char dummy_section; - - const auto create_dummy_per_cu = [&] (sect_offset sect_off, - unsigned int length, - bool is_dwz) - { - auto per_bfd = reinterpret_cast<dwarf2_per_bfd *> (&dummy_per_bfd); - auto section = reinterpret_cast<dwarf2_section_info *> (&dummy_section); + auto dummy_per_bfd = reinterpret_cast<dwarf2_per_bfd *> (0x3000); + auto &main_section = *reinterpret_cast<dwarf2_section_info *> (0x4000); + auto &dwz_section = *reinterpret_cast<dwarf2_section_info *> (0x5000); + std::vector<dwarf2_per_cu_up> units; - return dwarf2_per_cu_up (new dwarf2_per_cu (per_bfd, section, sect_off, - length, is_dwz)); + /* Create one dummy unit, append it to UNITS, return a non-owning + reference. */ + auto create_dummy_per_unit = [&] (dwarf2_section_info §ion, + unsigned int sect_off, bool is_dwz) + -> dwarf2_per_cu & + { + /* Omit the length, because dwarf2_find_containing_unit does not consider + it. */ + return *units.emplace_back (new dwarf2_per_cu (dummy_per_bfd, §ion, + sect_offset (sect_off), + 0, is_dwz)); }; - /* Units in the main file. */ - dwarf2_per_cu_up one = create_dummy_per_cu (sect_offset (0), 5, false); - dwarf2_per_cu *one_ptr = one.get (); - dwarf2_per_cu_up two - = create_dummy_per_cu (sect_offset (one->length ()), 7, false); - dwarf2_per_cu *two_ptr = two.get (); - - /* Units in the supplementary (dwz) file. */ - dwarf2_per_cu_up three = create_dummy_per_cu (sect_offset (0), 5, true); - dwarf2_per_cu *three_ptr = three.get (); - dwarf2_per_cu_up four - = create_dummy_per_cu (sect_offset (three->length ()), 7, true); - dwarf2_per_cu *four_ptr = four.get (); - - std::vector<dwarf2_per_cu_up> units; - units.push_back (std::move (one)); - units.push_back (std::move (two)); - units.push_back (std::move (three)); - units.push_back (std::move (four)); - - int result; + /* Create 2 units in the main file and 2 units in the supplementary (dwz) + file. */ + auto &main1 = create_dummy_per_unit (main_section, 10, false); + auto &main2 = create_dummy_per_unit (main_section, 20, false); + auto &dwz1 = create_dummy_per_unit (dwz_section, 10, false); + auto &dwz2 = create_dummy_per_unit (dwz_section, 20, false); + + /* Check that looking up a unit at all offsets in the range [START,END[ in + section SECTION finds EXPECTED. */ + auto check_range = [&units] (dwarf2_section_info §ion, unsigned int start, + unsigned int end, dwarf2_per_cu *expected) + { + for (unsigned int sect_off = start; sect_off < end; ++sect_off) + { + section_and_offset target { §ion, sect_offset (sect_off) }; + dwarf2_per_cu *result = dwarf2_find_containing_unit (target, units); - result = dwarf2_find_containing_comp_unit (sect_offset (0), 0, units); - SELF_CHECK (units[result].get () == one_ptr); - result = dwarf2_find_containing_comp_unit (sect_offset (3), 0, units); - SELF_CHECK (units[result].get () == one_ptr); - result = dwarf2_find_containing_comp_unit (sect_offset (5), 0, units); - SELF_CHECK (units[result].get () == two_ptr); + SELF_CHECK (result == expected); + } + }; - result = dwarf2_find_containing_comp_unit (sect_offset (0), 1, units); - SELF_CHECK (units[result].get () == three_ptr); - result = dwarf2_find_containing_comp_unit (sect_offset (3), 1, units); - SELF_CHECK (units[result].get () == three_ptr); - result = dwarf2_find_containing_comp_unit (sect_offset (5), 1, units); - SELF_CHECK (units[result].get () == four_ptr); -} + check_range (main_section, 0, 10, nullptr); + check_range (main_section, 10, 20, &main1); + check_range (main_section, 20, 30, &main2); + check_range (dwz_section, 0, 10, nullptr); + check_range (dwz_section, 10, 20, &dwz1); + check_range (dwz_section, 20, 30, &dwz2); } -} +} /* namespace find_containing_comp_unit */ +} /* namespace selftests */ #endif /* GDB_SELF_TEST */ @@ -19718,9 +19803,7 @@ show_check_physname (struct ui_file *file, int from_tty, value); } -void _initialize_dwarf2_read (); -void -_initialize_dwarf2_read () +INIT_GDB_FILE (dwarf2_read) { add_setshow_prefix_cmd ("dwarf", class_maintenance, _("\ diff --git a/gdb/dwarf2/read.h b/gdb/dwarf2/read.h index 5b4c8f6..74ec420 100644 --- a/gdb/dwarf2/read.h +++ b/gdb/dwarf2/read.h @@ -20,6 +20,9 @@ #ifndef GDB_DWARF2_READ_H #define GDB_DWARF2_READ_H +#if CXX_STD_THREAD +#include <mutex> +#endif #include <queue> #include "dwarf2/abbrev.h" #include "dwarf2/unit-head.h" @@ -44,7 +47,6 @@ struct tu_stats int nr_symtab_sharers = 0; int nr_stmt_less_type_units = 0; int nr_all_type_units_reallocs = 0; - int nr_tus = 0; }; struct abbrev_table_cache; @@ -293,6 +295,10 @@ public: return m_length; } + /* Return true if the length of this CU has been set. */ + bool length_is_set () const + { return m_length != 0; } + void set_length (unsigned int length, bool strict_p = true) { if (m_length == 0) @@ -512,26 +518,12 @@ struct dwarf2_per_bfd const char *filename () const { return bfd_get_filename (this->obfd); } - /* Return the CU given its index. */ - dwarf2_per_cu *get_cu (int index) const + /* Return the unit given its index. */ + dwarf2_per_cu *get_unit (int index) const { return this->all_units[index].get (); } - /* Return the CU given its index in the CU table in the index. */ - dwarf2_per_cu *get_index_cu (int index) const - { - if (this->all_comp_units_index_cus.empty ()) - return get_cu (index); - - return this->all_comp_units_index_cus[index]; - } - - dwarf2_per_cu *get_index_tu (int index) const - { - return this->all_comp_units_index_tus[index]; - } - /* Return the separate '.dwz' debug file. If there is no .gnu_debugaltlink or .debug_sup section in the file, then the result depends on REQUIRE: if REQUIRE is true, error out; if @@ -616,13 +608,9 @@ public: the target compilation unit of a particular reference. */ std::vector<dwarf2_per_cu_up> all_units; - /* The all_units vector contains both CUs and TUs. Provide views on the - vector that are limited to either the CU part or the TU part. */ - gdb::array_view<dwarf2_per_cu_up> all_comp_units; - gdb::array_view<dwarf2_per_cu_up> all_type_units; - - std::vector<dwarf2_per_cu *> all_comp_units_index_cus; - std::vector<dwarf2_per_cu *> all_comp_units_index_tus; + /* Number of compilation and type units in the ALL_UNITS vector. */ + unsigned int num_comp_units = 0; + unsigned int num_type_units = 0; /* Set of signatured_types, used to look up by signature. */ signatured_type_set signatured_types; @@ -634,6 +622,11 @@ public: /* Set of dwo_file objects. */ dwo_file_up_set dwo_files; +#if CXX_STD_THREAD + /* Mutex to synchronize access to DWO_FILES. */ + std::mutex dwo_files_lock; +#endif + /* The DWP file if there is one, or NULL. */ dwp_file_up dwp_file; @@ -680,6 +673,36 @@ public: std::string captured_debug_dir; }; +/* Scoped object to remove all units from PER_BFD and clear other associated + fields in case of failure. */ + +struct scoped_remove_all_units +{ + explicit scoped_remove_all_units (dwarf2_per_bfd &per_bfd) + : m_per_bfd (&per_bfd) + {} + + DISABLE_COPY_AND_ASSIGN (scoped_remove_all_units); + + ~scoped_remove_all_units () + { + if (m_per_bfd == nullptr) + return; + + m_per_bfd->all_units.clear (); + m_per_bfd->num_comp_units = 0; + m_per_bfd->num_type_units = 0; + } + + /* Disable this object. Call this to keep the units of M_PER_BFD on the + success path. */ + void disable () { m_per_bfd = nullptr; } + +private: + /* This is nullptr if the object is disabled. */ + dwarf2_per_bfd *m_per_bfd; +}; + /* An iterator for all_units that is based on index. This approach makes it possible to iterate over all_units safely, when some caller in the loop may add new units. */ @@ -702,7 +725,7 @@ public: dwarf2_per_cu *operator* () const { - return m_per_bfd->get_cu (m_index); + return m_per_bfd->get_unit (m_index); } bool operator== (const all_units_iterator &other) const @@ -1029,8 +1052,7 @@ private: dwo_file_up open_and_init_dwo_file (dwarf2_cu *cu, const char *dwo_name, const char *comp_dir); - void locate_dwo_sections (struct objfile *objfile, bfd *abfd, asection *sectp, - struct dwo_sections *dwo_sections); + void locate_dwo_sections (objfile *objfile, dwo_file &dwo_file); void create_dwo_unit_hash_tables (dwo_file &dwo_file, dwarf2_cu &skeleton_cu, dwarf2_section_info §ion, @@ -1225,7 +1247,7 @@ extern void dw_expand_symtabs_matching_file_matcher extern const char *read_indirect_string_at_offset (dwarf2_per_objfile *per_objfile, LONGEST str_offset); -/* Initialize the views on all_units. */ +/* Finalize the all_units vector. */ extern void finalize_all_units (dwarf2_per_bfd *per_bfd); @@ -1270,14 +1292,17 @@ extern pc_bounds_kind dwarf2_get_pc_bounds (die_info *die, dwarf2_cu *cu, addrmap_mutable *map, void *datum); -/* Locate the .debug_info compilation unit from CU's objfile which contains - the DIE at OFFSET. Raises an error on failure. */ +/* Locate the unit in PER_OBJFILE which contains the DIE at TARGET. Raises an + error on failure. */ + +extern dwarf2_per_cu *dwarf2_find_containing_unit + (const section_and_offset &target, dwarf2_per_objfile *per_objfile); + +/* Locate the unit starting at START in PER_BFD. Return nullptr if not + found. */ -extern dwarf2_per_cu *dwarf2_find_containing_comp_unit (sect_offset sect_off, - unsigned int - offset_in_dwz, - dwarf2_per_bfd - *per_bfd); +extern dwarf2_per_cu *dwarf2_find_unit (const section_and_offset &start, + dwarf2_per_bfd *per_bfd); /* Decode simple location descriptions. @@ -1320,4 +1345,10 @@ extern int dwarf2_ranges_read (unsigned offset, unrelocated_addr *low_return, extern file_and_directory &find_file_and_directory (die_info *die, dwarf2_cu *cu); + +/* Return the section that ATTR, an attribute with ref form, references. */ + +extern const dwarf2_section_info &get_section_for_ref + (const attribute &attr, dwarf2_cu *cu); + #endif /* GDB_DWARF2_READ_H */ diff --git a/gdb/dwarf2/section.h b/gdb/dwarf2/section.h index b9d3c31..fbdb025 100644 --- a/gdb/dwarf2/section.h +++ b/gdb/dwarf2/section.h @@ -43,6 +43,8 @@ the real section this "virtual" section is contained in, and BUFFER,SIZE describe the virtual section. */ +#include "dwarf2/types.h" + struct dwarf2_section_info { /* Return the name of this section. */ @@ -112,4 +114,14 @@ struct dwarf2_section_info bool is_virtual; }; +using dwarf2_section_info_up = std::unique_ptr<dwarf2_section_info>; + +/* A pair-like structure to represent an offset into a section. */ + +struct section_and_offset +{ + const dwarf2_section_info *section; + sect_offset offset; +}; + #endif /* GDB_DWARF2_SECTION_H */ diff --git a/gdb/elfread.c b/gdb/elfread.c index 7dd8fc7..ae74978 100644 --- a/gdb/elfread.c +++ b/gdb/elfread.c @@ -1513,9 +1513,7 @@ static const struct gnu_ifunc_fns elf_gnu_ifunc_fns = elf_gnu_ifunc_resolver_return_stop }; -void _initialize_elfread (); -void -_initialize_elfread () +INIT_GDB_FILE (elfread) { add_symtab_fns (bfd_target_elf_flavour, &elf_sym_fns); @@ -492,7 +492,7 @@ fake_method::fake_method (type_instance_flags flags, fake_method::~fake_method () { - xfree (m_type.fields ()); + xfree (m_type.fields ().data ()); } namespace expr @@ -2558,27 +2558,26 @@ unop_extract_operation::evaluate (struct type *expect_type, } - /* Helper for evaluate_subexp_for_address. */ static value * -evaluate_subexp_for_address_base (struct expression *exp, enum noside noside, - value *x) +evaluate_subexp_for_address_base (enum noside noside, value *x) { if (noside == EVAL_AVOID_SIDE_EFFECTS) { struct type *type = check_typedef (x->type ()); + enum type_code typecode = type->code (); if (TYPE_IS_REFERENCE (type)) return value::zero (lookup_pointer_type (type->target_type ()), - not_lval); - else if (x->lval () == lval_memory || value_must_coerce_to_target (x)) - return value::zero (lookup_pointer_type (x->type ()), - not_lval); + not_lval); + else if (x->lval () == lval_memory || value_must_coerce_to_target (x) + || typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION) + return value::zero (lookup_pointer_type (x->type ()), not_lval); else - error (_("Attempt to take address of " - "value not located in memory.")); + error (_("Attempt to take address of value not located in memory.")); } + return value_addr (x); } @@ -2598,7 +2597,7 @@ value * operation::evaluate_for_address (struct expression *exp, enum noside noside) { value *val = evaluate (nullptr, exp, noside); - return evaluate_subexp_for_address_base (exp, noside, val); + return evaluate_subexp_for_address_base (noside, val); } value * @@ -2625,7 +2624,7 @@ unop_ind_base_operation::evaluate_for_address (struct expression *exp, if (unop_user_defined_p (UNOP_IND, x)) { x = value_x_unop (x, UNOP_IND, noside); - return evaluate_subexp_for_address_base (exp, noside, x); + return evaluate_subexp_for_address_base (noside, x); } return coerce_array (x); @@ -2679,11 +2678,11 @@ var_value_operation::evaluate_for_address (struct expression *exp, if (noside == EVAL_AVOID_SIDE_EFFECTS) { struct type *type = lookup_pointer_type (var->type ()); - enum address_class sym_class = var->aclass (); + location_class loc_class = var->loc_class (); - if (sym_class == LOC_CONST - || sym_class == LOC_CONST_BYTES - || sym_class == LOC_REGISTER) + if (loc_class == LOC_CONST + || loc_class == LOC_CONST_BYTES + || loc_class == LOC_REGISTER) error (_("Attempt to take address of register or constant.")); return value::zero (type, not_lval); diff --git a/gdb/event-top.c b/gdb/event-top.c index 968117c..3138e8c 100644 --- a/gdb/event-top.c +++ b/gdb/event-top.c @@ -1180,6 +1180,9 @@ quit (void) throw_forced_quit ("SIGTERM"); } + /* Pressing ^C cancels i-search. Tell readline that a ^C happened. */ + rl_callback_sigcleanup (); + #ifdef __MSDOS__ /* No steenking SIGINT will ever be coming our way when the program is resumed. Don't lie. */ @@ -1650,9 +1653,7 @@ show_debug_event_loop_command (struct ui_file *file, int from_tty, gdb_printf (file, _("Event loop debugging is %s.\n"), value); } -void _initialize_event_top (); -void -_initialize_event_top () +INIT_GDB_FILE (event_top) { add_setshow_enum_cmd ("event-loop", class_maintenance, debug_event_loop_enum, @@ -44,7 +44,7 @@ #include <ctype.h> #include <sys/stat.h> -#include "solist.h" +#include "solib.h" #include <algorithm> #include "gdbsupport/pathstuff.h" #include "cli/cli-style.h" @@ -218,28 +218,32 @@ validate_exec_file (int from_tty) if (exec_file_mismatch_mode == exec_file_mismatch_off) return; + /* If there's no current executable, then there's nothing to + validate against, so we're done. */ const char *current_exec_file = current_program_space->exec_filename (); - struct inferior *inf = current_inferior (); - /* Try to determine a filename from the process itself. */ - const char *pid_exec_file = target_pid_to_exec_file (inf->pid); - bool build_id_mismatch = false; - - /* If we cannot validate the exec file, return. */ - if (current_exec_file == NULL || pid_exec_file == NULL) + if (current_exec_file == nullptr) return; - /* Try validating via build-id, if available. This is the most - reliable check. */ + /* Try to determine a filename from the process itself. If we + cannot get an executable from the process, then no validation is + possible. */ + const char *pid_exec_file + = target_pid_to_exec_file (current_inferior ()->pid); + if (pid_exec_file == nullptr) + return; - /* In case current_exec_file was changed, reopen_exec_file ensures - an up to date build_id (will do nothing if the file timestamp - did not change). If exec file changed, reopen_exec_file has - allocated another file name, so get_exec_file again. */ + /* In case current_exec_file was changed, reopen_exec_file ensures an up + to date build_id (will do nothing if the file timestamp did not + change). If exec file changed, reopen_exec_file has allocated another + file name, so get_exec_file again. */ reopen_exec_file (); current_exec_file = current_program_space->exec_filename (); + /* Try validating via build-id, if available. This is the most reliable + check. */ const bfd_build_id *exec_file_build_id = build_id_bfd_get (current_program_space->exec_bfd ()); + bool build_id_mismatch = false; if (exec_file_build_id != nullptr) { /* Prepend the target prefix, to force gdb_bfd_open to open the @@ -334,6 +338,14 @@ exec_file_locate_attach (int pid, int defer_bp_reset, int from_tty) gdb::unique_xmalloc_ptr<char> exec_file_host = exec_file_find (exec_file_target, NULL); + if (exec_file_host == nullptr) + { + warning (_("No executable has been specified, and target executable " + "%ps could not be found. Try using the \"%ps\" command."), + styled_string (file_name_style.style (), exec_file_target), + styled_string (command_style.style (), "file")); + return; + } if (defer_bp_reset) add_flags |= SYMFILE_DEFER_BP_RESET; @@ -1065,9 +1077,7 @@ exec_target::find_memory_regions (find_memory_region_ftype func, void *data) return objfile_find_memory_regions (this, func, data); } -void _initialize_exec (); -void -_initialize_exec () +INIT_GDB_FILE (exec) { struct cmd_list_element *c; diff --git a/gdb/expop.h b/gdb/expop.h index a3541d4..6f509da 100644 --- a/gdb/expop.h +++ b/gdb/expop.h @@ -476,11 +476,11 @@ check_constant (const gdb_mpz &cst) static inline bool check_constant (struct symbol *sym) { - enum address_class sc = sym->aclass (); - return (sc == LOC_BLOCK - || sc == LOC_CONST - || sc == LOC_CONST_BYTES - || sc == LOC_LABEL); + location_class lc = sym->loc_class (); + return (lc == LOC_BLOCK + || lc == LOC_CONST + || lc == LOC_CONST_BYTES + || lc == LOC_LABEL); } static inline bool diff --git a/gdb/extension.c b/gdb/extension.c index 6d14a20..d34dbcd 100644 --- a/gdb/extension.c +++ b/gdb/extension.c @@ -1102,9 +1102,7 @@ ext_lang_before_prompt (const char *current_gdb_prompt) } } -void _initialize_extension (); -void -_initialize_extension () +INIT_GDB_FILE (extension) { gdb::observers::before_prompt.attach (ext_lang_before_prompt, "extension"); } diff --git a/gdb/extract-store-integer.c b/gdb/extract-store-integer.c index 4f20092..d73040b 100644 --- a/gdb/extract-store-integer.c +++ b/gdb/extract-store-integer.c @@ -337,9 +337,7 @@ extract_integer_test () #endif -void _initialize_extract_store_integer (); -void -_initialize_extract_store_integer () +INIT_GDB_FILE (extract_store_integer) { #if GDB_SELF_TEST selftests::register_test ("copy_integer_to_size", diff --git a/gdb/f-exp.y b/gdb/f-exp.y index 44ea11b..afcdc41 100644 --- a/gdb/f-exp.y +++ b/gdb/f-exp.y @@ -1663,7 +1663,7 @@ yylex (void) { result = lookup_symbol (tmp.c_str (), pstate->expression_context_block, domain, NULL); - if (result.symbol && result.symbol->aclass () == LOC_TYPEDEF) + if (result.symbol && result.symbol->loc_class () == LOC_TYPEDEF) { yylval.tsym.type = result.symbol->type (); return TYPENAME; diff --git a/gdb/f-lang.c b/gdb/f-lang.c index 3e31dce..1aa9fc4 100644 --- a/gdb/f-lang.c +++ b/gdb/f-lang.c @@ -1836,9 +1836,7 @@ builtin_f_type (struct gdbarch *gdbarch) static struct cmd_list_element *set_fortran_list; static struct cmd_list_element *show_fortran_list; -void _initialize_f_language (); -void -_initialize_f_language () +INIT_GDB_FILE (f_language) { add_setshow_prefix_cmd ("fortran", no_class, diff --git a/gdb/f-typeprint.c b/gdb/f-typeprint.c index 7d0cdc0..e96d27c 100644 --- a/gdb/f-typeprint.c +++ b/gdb/f-typeprint.c @@ -299,8 +299,6 @@ void f_language::f_type_print_base (struct type *type, struct ui_file *stream, int show, int level) const { - int index; - QUIT; stream->wrap_here (4); @@ -423,14 +421,13 @@ f_language::f_type_print_base (struct type *type, struct ui_file *stream, if (show > 0) { gdb_puts ("\n", stream); - for (index = 0; index < type->num_fields (); index++) + for (const auto &field : type->fields ()) { - f_type_print_base (type->field (index).type (), stream, - show - 1, level + 4); + f_type_print_base (field.type (), stream, show - 1, level + 4); gdb_puts (" :: ", stream); - fputs_styled (type->field (index).name (), + fputs_styled (field.name (), variable_name_style.style (), stream); - f_type_print_varspec_suffix (type->field (index).type (), + f_type_print_varspec_suffix (field.type (), stream, show - 1, 0, 0, 0, false); gdb_puts ("\n", stream); } diff --git a/gdb/f-valprint.c b/gdb/f-valprint.c index 0f3b2a6..935bf02 100644 --- a/gdb/f-valprint.c +++ b/gdb/f-valprint.c @@ -631,7 +631,7 @@ info_common_command_for_block (const struct block *block, const char *comname, const struct common_block *common = sym->value_common_block (); size_t index; - gdb_assert (sym->aclass () == LOC_COMMON_BLOCK); + gdb_assert (sym->loc_class () == LOC_COMMON_BLOCK); if (comname && (!sym->linkage_name () || strcmp (comname, sym->linkage_name ()) != 0)) @@ -719,9 +719,7 @@ info_common_command (const char *comname, int from_tty) } } -void _initialize_f_valprint (); -void -_initialize_f_valprint () +INIT_GDB_FILE (f_valprint) { add_info ("common", info_common_command, _("Print out the values contained in a Fortran COMMON block.")); diff --git a/gdb/fbsd-nat.c b/gdb/fbsd-nat.c index 71a8386..935b947 100644 --- a/gdb/fbsd-nat.c +++ b/gdb/fbsd-nat.c @@ -2465,14 +2465,12 @@ fbsd_nat_get_siginfo (ptid_t ptid, siginfo_t *siginfo) if (ptrace (PT_LWPINFO, pid, (caddr_t) &pl, sizeof pl) == -1) return false; if (!(pl.pl_flags & PL_FLAG_SI)) - return false;; + return false; *siginfo = pl.pl_siginfo; return (true); } -void _initialize_fbsd_nat (); -void -_initialize_fbsd_nat () +INIT_GDB_FILE (fbsd_nat) { add_setshow_boolean_cmd ("fbsd-lwp", class_maintenance, &debug_fbsd_lwp, _("\ diff --git a/gdb/features/Makefile b/gdb/features/Makefile index 7a8c799..750508a 100644 --- a/gdb/features/Makefile +++ b/gdb/features/Makefile @@ -100,6 +100,7 @@ OUTPUTS = $(patsubst %,$(outdir)/%.dat,$(WHICH)) # --enable-targets=all GDB. You can override this by passing XMLTOC # to make on the command line. XMLTOC = \ + alpha.xml \ microblaze-with-stack-protect.xml \ microblaze.xml \ mips-dsp-linux.xml \ diff --git a/gdb/features/alpha-core.xml b/gdb/features/alpha-core.xml new file mode 100644 index 0000000..c9e12f4 --- /dev/null +++ b/gdb/features/alpha-core.xml @@ -0,0 +1,136 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2025 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<feature name="org.gnu.gdb.alpha.core"> + <!-- IEEE rounding mode values --> + <enum id="dyn_rm_enum" size="8"> + <!-- Chopped rounding mode --> + <evalue name="chop" value="0"/> + <!-- Minus infinity --> + <evalue name="-inf" value="1"/> + <!-- Normal rounding --> + <evalue name="norm" value="2"/> + <!-- Plus infinity --> + <evalue name="+inf" value="3"/> + </enum> + + <!-- Floating-Point Control Register Flags --> + <flags id="fpcr_flags" size="8"> + <!-- Denormal Operand Exception Disable --> + <field name="DNOD" start="47" end="47"/> + <!-- Denormal Operands to Zero --> + <field name="DNZ" start="48" end="48"/> + <!-- Invalid Operation Disable --> + <field name="INVD" start="49" end="49"/> + <!-- Division by Zero Disable --> + <field name="DZED" start="50" end="50"/> + <!-- Overflow Disable --> + <field name="OVFD" start="51" end="51"/> + <!-- Invalid Operation --> + <field name="INV" start="52" end="52"/> + <!-- Division by Zero --> + <field name="DZE" start="53" end="53"/> + <!-- Overflow --> + <field name="OVF" start="54" end="54"/> + <!-- Underflow --> + <field name="UNF" start="55" end="55"/> + <!-- Inexact Result --> + <field name="INE" start="56" end="56"/> + <!-- Integer Overflow --> + <field name="IOV" start="57" end="57"/> + <!-- Dynamic Rounding Mode --> + <field name="DYN_RM" start="58" end="59" type="dyn_rm_enum"/> + <!-- Underflow to Zero --> + <field name="UNDZ" start="60" end="60"/> + <!-- Underflow Disable --> + <field name="UNFD" start="61" end="61"/> + <!-- Inexact Disable --> + <field name="INED" start="62" end="62"/> + <!-- Summary Bit --> + <field name="SUM" start="63" end="63"/> + </flags> + + <!-- Integer Registers --> + <reg name="v0" bitsize="64" type="int64"/> + <reg name="t0" bitsize="64" type="int64"/> + <reg name="t1" bitsize="64" type="int64"/> + <reg name="t2" bitsize="64" type="int64"/> + <reg name="t3" bitsize="64" type="int64"/> + <reg name="t4" bitsize="64" type="int64"/> + <reg name="t5" bitsize="64" type="int64"/> + <reg name="t6" bitsize="64" type="int64"/> + <reg name="t7" bitsize="64" type="int64"/> + <reg name="s0" bitsize="64" type="int64"/> + <reg name="s1" bitsize="64" type="int64"/> + <reg name="s2" bitsize="64" type="int64"/> + <reg name="s3" bitsize="64" type="int64"/> + <reg name="s4" bitsize="64" type="int64"/> + <reg name="s5" bitsize="64" type="int64"/> + <reg name="fp" bitsize="64" type="int64"/> + <reg name="a0" bitsize="64" type="int64"/> + <reg name="a1" bitsize="64" type="int64"/> + <reg name="a2" bitsize="64" type="int64"/> + <reg name="a3" bitsize="64" type="int64"/> + <reg name="a4" bitsize="64" type="int64"/> + <reg name="a5" bitsize="64" type="int64"/> + <reg name="t8" bitsize="64" type="int64"/> + <reg name="t9" bitsize="64" type="int64"/> + <reg name="t10" bitsize="64" type="int64"/> + <reg name="t11" bitsize="64" type="int64"/> + <reg name="ra" bitsize="64" type="int64"/> + <reg name="t12" bitsize="64" type="int64"/> + <reg name="at" bitsize="64" type="int64"/> + <reg name="gp" bitsize="64" type="data_ptr"/> + <reg name="sp" bitsize="64" type="data_ptr"/> + <reg name="zero" bitsize="64" type="int64" save-restore="no"/> + + <!-- Floating-Point Registers --> + <reg name="f0" bitsize="64" type="float" group="float"/> + <reg name="f1" bitsize="64" type="float" group="float"/> + <reg name="f2" bitsize="64" type="float" group="float"/> + <reg name="f3" bitsize="64" type="float" group="float"/> + <reg name="f4" bitsize="64" type="float" group="float"/> + <reg name="f5" bitsize="64" type="float" group="float"/> + <reg name="f6" bitsize="64" type="float" group="float"/> + <reg name="f7" bitsize="64" type="float" group="float"/> + <reg name="f8" bitsize="64" type="float" group="float"/> + <reg name="f9" bitsize="64" type="float" group="float"/> + <reg name="f10" bitsize="64" type="float" group="float"/> + <reg name="f11" bitsize="64" type="float" group="float"/> + <reg name="f12" bitsize="64" type="float" group="float"/> + <reg name="f13" bitsize="64" type="float" group="float"/> + <reg name="f14" bitsize="64" type="float" group="float"/> + <reg name="f15" bitsize="64" type="float" group="float"/> + <reg name="f16" bitsize="64" type="float" group="float"/> + <reg name="f17" bitsize="64" type="float" group="float"/> + <reg name="f18" bitsize="64" type="float" group="float"/> + <reg name="f19" bitsize="64" type="float" group="float"/> + <reg name="f20" bitsize="64" type="float" group="float"/> + <reg name="f21" bitsize="64" type="float" group="float"/> + <reg name="f22" bitsize="64" type="float" group="float"/> + <reg name="f23" bitsize="64" type="float" group="float"/> + <reg name="f24" bitsize="64" type="float" group="float"/> + <reg name="f25" bitsize="64" type="float" group="float"/> + <reg name="f26" bitsize="64" type="float" group="float"/> + <reg name="f27" bitsize="64" type="float" group="float"/> + <reg name="f28" bitsize="64" type="float" group="float"/> + <reg name="f29" bitsize="64" type="float" group="float"/> + <reg name="f30" bitsize="64" type="float" group="float"/> + + <!-- Floating-Point Control Register --> + <reg name="fpcr" bitsize="64" type="fpcr_flags" group="float"/> + + <!-- Program Counter --> + <reg name="pc" bitsize="64" type="code_ptr"/> + + <!-- Reserved Index for Former Virtual Register --> + <reg name="" bitsize="64" type="int64" save-restore="no"/> + + <!-- PALcode Memory Slot --> + <reg name="unique" bitsize="64" type="int64" group="system"/> +</feature> diff --git a/gdb/features/alpha.c b/gdb/features/alpha.c new file mode 100644 index 0000000..35f12fc --- /dev/null +++ b/gdb/features/alpha.c @@ -0,0 +1,111 @@ +/* THIS FILE IS GENERATED. -*- buffer-read-only: t -*- vi:set ro: + Original: alpha.xml */ + +#include "osabi.h" +#include "target-descriptions.h" + +const struct target_desc *tdesc_alpha; +static void +initialize_tdesc_alpha (void) +{ + target_desc_up result = allocate_target_description (); + struct tdesc_feature *feature; + + feature = tdesc_create_feature (result.get (), "org.gnu.gdb.alpha.core"); + tdesc_type_with_fields *type_with_fields; + type_with_fields = tdesc_create_enum (feature, "dyn_rm_enum", 8); + tdesc_add_enum_value (type_with_fields, 0, "chop"); + tdesc_add_enum_value (type_with_fields, 1, "-inf"); + tdesc_add_enum_value (type_with_fields, 2, "norm"); + tdesc_add_enum_value (type_with_fields, 3, "+inf"); + + type_with_fields = tdesc_create_flags (feature, "fpcr_flags", 8); + tdesc_add_flag (type_with_fields, 47, "DNOD"); + tdesc_add_flag (type_with_fields, 48, "DNZ"); + tdesc_add_flag (type_with_fields, 49, "INVD"); + tdesc_add_flag (type_with_fields, 50, "DZED"); + tdesc_add_flag (type_with_fields, 51, "OVFD"); + tdesc_add_flag (type_with_fields, 52, "INV"); + tdesc_add_flag (type_with_fields, 53, "DZE"); + tdesc_add_flag (type_with_fields, 54, "OVF"); + tdesc_add_flag (type_with_fields, 55, "UNF"); + tdesc_add_flag (type_with_fields, 56, "INE"); + tdesc_add_flag (type_with_fields, 57, "IOV"); + tdesc_type *field_type; + field_type = tdesc_named_type (feature, "dyn_rm_enum"); + tdesc_add_typed_bitfield (type_with_fields, "DYN_RM", 58, 59, field_type); + tdesc_add_flag (type_with_fields, 60, "UNDZ"); + tdesc_add_flag (type_with_fields, 61, "UNFD"); + tdesc_add_flag (type_with_fields, 62, "INED"); + tdesc_add_flag (type_with_fields, 63, "SUM"); + + tdesc_create_reg (feature, "v0", 0, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t0", 1, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t1", 2, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t2", 3, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t3", 4, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t4", 5, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t5", 6, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t6", 7, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t7", 8, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "s0", 9, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "s1", 10, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "s2", 11, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "s3", 12, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "s4", 13, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "s5", 14, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "fp", 15, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "a0", 16, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "a1", 17, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "a2", 18, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "a3", 19, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "a4", 20, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "a5", 21, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t8", 22, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t9", 23, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t10", 24, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t11", 25, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "ra", 26, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "t12", 27, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "at", 28, 1, NULL, 64, "int64"); + tdesc_create_reg (feature, "gp", 29, 1, NULL, 64, "data_ptr"); + tdesc_create_reg (feature, "sp", 30, 1, NULL, 64, "data_ptr"); + tdesc_create_reg (feature, "zero", 31, 0, NULL, 64, "int64"); + tdesc_create_reg (feature, "f0", 32, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f1", 33, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f2", 34, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f3", 35, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f4", 36, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f5", 37, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f6", 38, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f7", 39, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f8", 40, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f9", 41, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f10", 42, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f11", 43, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f12", 44, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f13", 45, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f14", 46, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f15", 47, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f16", 48, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f17", 49, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f18", 50, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f19", 51, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f20", 52, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f21", 53, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f22", 54, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f23", 55, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f24", 56, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f25", 57, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f26", 58, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f27", 59, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f28", 60, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f29", 61, 1, "float", 64, "float"); + tdesc_create_reg (feature, "f30", 62, 1, "float", 64, "float"); + tdesc_create_reg (feature, "fpcr", 63, 1, "float", 64, "fpcr_flags"); + tdesc_create_reg (feature, "pc", 64, 1, NULL, 64, "code_ptr"); + tdesc_create_reg (feature, "", 65, 0, NULL, 64, "int64"); + tdesc_create_reg (feature, "unique", 66, 1, "system", 64, "int64"); + + tdesc_alpha = result.release (); +} diff --git a/gdb/features/alpha.xml b/gdb/features/alpha.xml new file mode 100644 index 0000000..3ae0ab8 --- /dev/null +++ b/gdb/features/alpha.xml @@ -0,0 +1,11 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2025 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<target version="1.0"> + <xi:include href="alpha-core.xml"/> +</target> diff --git a/gdb/filesystem.c b/gdb/filesystem.c index 51e1c3f..a272c13 100644 --- a/gdb/filesystem.c +++ b/gdb/filesystem.c @@ -76,9 +76,7 @@ is \"%s\".\n"), value); } -void _initialize_filesystem (); -void -_initialize_filesystem () +INIT_GDB_FILE (filesystem) { add_setshow_enum_cmd ("target-file-system-kind", class_files, diff --git a/gdb/findcmd.c b/gdb/findcmd.c index 993c487..4e47877 100644 --- a/gdb/findcmd.c +++ b/gdb/findcmd.c @@ -279,9 +279,7 @@ find_command (const char *args, int from_tty) found_count > 1 ? "s" : ""); } -void _initialize_mem_search (); -void -_initialize_mem_search () +INIT_GDB_FILE (mem_search) { add_cmd ("find", class_vars, find_command, _("\ Search memory for a sequence of bytes.\n\ diff --git a/gdb/findvar.c b/gdb/findvar.c index 9da5c48..c5294fe 100644 --- a/gdb/findvar.c +++ b/gdb/findvar.c @@ -124,7 +124,7 @@ symbol_read_needs (struct symbol *sym) computed_ops != nullptr) return computed_ops->get_symbol_read_needs (sym); - switch (sym->aclass ()) + switch (sym->loc_class ()) { /* All cases listed explicitly so that gcc -Wall will detect it if we failed to consider one. */ @@ -306,7 +306,7 @@ language_defn::read_var_value (struct symbol *var, if (const symbol_computed_ops *computed_ops = var->computed_ops ()) return computed_ops->read_variable (var, frame); - switch (var->aclass ()) + switch (var->loc_class ()) { case LOC_CONST: if (is_dynamic_type (type)) @@ -429,7 +429,7 @@ language_defn::read_var_value (struct symbol *var, const symbol_register_ops *reg_ops = var->register_ops (); int regno = reg_ops->register_number (var, get_frame_arch (frame)); - if (var->aclass () == LOC_REGPARM_ADDR) + if (var->loc_class () == LOC_REGPARM_ADDR) addr = value_as_address (value_from_register (lookup_pointer_type (type), regno, frame)); else diff --git a/gdb/fork-child.c b/gdb/fork-child.c index 8abfbda..fd7f1e0 100644 --- a/gdb/fork-child.c +++ b/gdb/fork-child.c @@ -153,9 +153,7 @@ show_startup_with_shell (struct ui_file *file, int from_tty, value); } -void _initialize_fork_child (); -void -_initialize_fork_child () +INIT_GDB_FILE (fork_child) { add_setshow_filename_cmd ("exec-wrapper", class_run, &exec_wrapper, _("\ Set a wrapper for running programs.\n\ diff --git a/gdb/frame-unwind.c b/gdb/frame-unwind.c index 9ed2dee..95768fa 100644 --- a/gdb/frame-unwind.c +++ b/gdb/frame-unwind.c @@ -49,6 +49,7 @@ static constexpr std::initializer_list<const frame_unwind *> standard_unwinders = { &dummy_frame_unwind, +#if defined(DWARF_FORMAT_AVAILABLE) /* The DWARF tailcall sniffer must come before the inline sniffer. Otherwise, we can end up in a situation where a DWARF frame finds tailcall information, but then the inline sniffer claims a frame @@ -57,6 +58,7 @@ static constexpr std::initializer_list<const frame_unwind *> activated if the newer frame was created using the DWARF unwinder, and it also found tailcall information. */ &dwarf2_tailcall_frame_unwind, +#endif &inline_frame_unwind, }; @@ -612,9 +614,7 @@ maintenance_enable_frame_unwinders (const char *args, int from_tty) enable_disable_frame_unwinders (args, from_tty, true); } -void _initialize_frame_unwind (); -void -_initialize_frame_unwind () +INIT_GDB_FILE (frame_unwind) { /* Add "maint info frame-unwinders". */ add_cmd ("frame-unwinders", diff --git a/gdb/frame.c b/gdb/frame.c index fe5336f..5c41dcd 100644 --- a/gdb/frame.c +++ b/gdb/frame.c @@ -2617,7 +2617,7 @@ inside_main_func (const frame_info_ptr &this_frame) SEARCH_FUNCTION_DOMAIN, nullptr); /* This lookup should always yield a block-valued symbol. */ - if (bs.symbol != nullptr && bs.symbol->aclass () == LOC_BLOCK) + if (bs.symbol != nullptr && bs.symbol->loc_class () == LOC_BLOCK) { const struct block *block = bs.symbol->value_block (); gdb_assert (block != nullptr); @@ -2663,15 +2663,14 @@ get_prev_frame (const frame_info_ptr &this_frame) { FRAME_SCOPED_DEBUG_ENTER_EXIT; - CORE_ADDR frame_pc; - int frame_pc_p; + std::optional<CORE_ADDR> frame_pc; /* There is always a frame. If this assertion fails, suspect that something should be calling get_selected_frame() or get_current_frame(). */ gdb_assert (this_frame != NULL); - frame_pc_p = get_frame_pc_if_available (this_frame, &frame_pc); + frame_pc = get_frame_pc_if_available (this_frame); /* tausq/2004-12-07: Dummy frames are skipped because it doesn't make much sense to stop unwinding at a dummy frame. One place where a dummy @@ -2686,7 +2685,7 @@ get_prev_frame (const frame_info_ptr &this_frame) if (this_frame->level >= 0 && get_frame_type (this_frame) == NORMAL_FRAME && !user_set_backtrace_options.backtrace_past_main - && frame_pc_p + && frame_pc.has_value () && inside_main_func (this_frame)) /* Don't unwind past main(). Note, this is done _before_ the frame has been marked as previously unwound. That way if the @@ -2733,7 +2732,7 @@ get_prev_frame (const frame_info_ptr &this_frame) if (this_frame->level >= 0 && get_frame_type (this_frame) == NORMAL_FRAME && !user_set_backtrace_options.backtrace_past_entry - && frame_pc_p + && frame_pc.has_value () && inside_entry_func (this_frame)) { frame_debug_got_null_frame (this_frame, "inside entry func"); @@ -2747,7 +2746,7 @@ get_prev_frame (const frame_info_ptr &this_frame) && (get_frame_type (this_frame) == NORMAL_FRAME || get_frame_type (this_frame) == INLINE_FRAME) && get_frame_type (get_next_frame (this_frame)) == NORMAL_FRAME - && frame_pc_p && frame_pc == 0) + && frame_pc.has_value () && *frame_pc == 0) { frame_debug_got_null_frame (this_frame, "zero PC"); return NULL; @@ -2763,25 +2762,24 @@ get_frame_pc (const frame_info_ptr &frame) return frame_unwind_pc (frame_info_ptr (frame->next)); } -bool -get_frame_pc_if_available (const frame_info_ptr &frame, CORE_ADDR *pc) +std::optional<CORE_ADDR> +get_frame_pc_if_available (const frame_info_ptr &frame) { + std::optional<CORE_ADDR> pc; gdb_assert (frame->next != NULL); try { - *pc = frame_unwind_pc (frame_info_ptr (frame->next)); + pc = frame_unwind_pc (frame_info_ptr (frame->next)); } catch (const gdb_exception_error &ex) { - if (ex.error == NOT_AVAILABLE_ERROR) - return false; - else + if (ex.error != NOT_AVAILABLE_ERROR) throw; } - return true; + return pc; } /* Return an address that falls within THIS_FRAME's code block. */ @@ -2870,7 +2868,7 @@ find_frame_sal (const frame_info_ptr &frame) { frame_info_ptr next_frame; int notcurrent; - CORE_ADDR pc; + std::optional<CORE_ADDR> pc; if (frame_inlined_callees (frame) > 0) { @@ -2914,11 +2912,11 @@ find_frame_sal (const frame_info_ptr &frame) PC and such a PC indicates the current (rather than next) instruction/line, consequently, for such cases, want to get the line containing fi->pc. */ - if (!get_frame_pc_if_available (frame, &pc)) + if (!(pc = get_frame_pc_if_available (frame))) return {}; - notcurrent = (pc != get_frame_address_in_block (frame)); - return find_pc_line (pc, notcurrent); + notcurrent = (*pc != get_frame_address_in_block (frame)); + return find_pc_line (*pc, notcurrent); } /* Per "frame.h", return the ``address'' of the frame. Code should @@ -3424,9 +3422,7 @@ frame_info_ptr::reinflate () const return m_ptr; } -void _initialize_frame (); -void -_initialize_frame () +INIT_GDB_FILE (frame) { obstack_init (&frame_cache_obstack); diff --git a/gdb/frame.h b/gdb/frame.h index b240662..99a7983 100644 --- a/gdb/frame.h +++ b/gdb/frame.h @@ -504,7 +504,8 @@ extern CORE_ADDR get_frame_pc (const frame_info_ptr &); /* Same as get_frame_pc, but return a boolean indication of whether the PC is actually available, instead of throwing an error. */ -extern bool get_frame_pc_if_available (const frame_info_ptr &frame, CORE_ADDR *pc); +extern std::optional<CORE_ADDR> get_frame_pc_if_available + (const frame_info_ptr &frame); /* An address (not necessarily aligned to an instruction boundary) that falls within THIS frame's code block. diff --git a/gdb/frv-linux-tdep.c b/gdb/frv-linux-tdep.c index 067b983..2a0fe1b 100644 --- a/gdb/frv-linux-tdep.c +++ b/gdb/frv-linux-tdep.c @@ -482,9 +482,7 @@ frv_linux_elf_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_frv_linux_tdep (); -void -_initialize_frv_linux_tdep () +INIT_GDB_FILE (frv_linux_tdep) { gdbarch_register_osabi (bfd_arch_frv, 0, GDB_OSABI_LINUX, frv_linux_init_abi); diff --git a/gdb/frv-tdep.c b/gdb/frv-tdep.c index 3608872..b2d6e1a 100644 --- a/gdb/frv-tdep.c +++ b/gdb/frv-tdep.c @@ -25,6 +25,7 @@ #include "frame.h" #include "frame-unwind.h" #include "frame-base.h" +#include "solib-frv.h" #include "trad-frame.h" #include "dis-asm.h" #include "sim-regno.h" @@ -1554,7 +1555,7 @@ frv_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_convert_from_func_ptr_addr (gdbarch, frv_convert_from_func_ptr_addr); - set_gdbarch_so_ops (gdbarch, &frv_so_ops); + set_gdbarch_make_solib_ops (gdbarch, make_frv_solib_ops); /* Hook in ABI-specific overrides, if they have been registered. */ gdbarch_init_osabi (info, gdbarch); @@ -1569,9 +1570,7 @@ frv_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_frv_tdep (); -void -_initialize_frv_tdep () +INIT_GDB_FILE (frv_tdep) { gdbarch_register (bfd_arch_frv, frv_gdbarch_init); } diff --git a/gdb/frv-tdep.h b/gdb/frv-tdep.h index 07982b4..7b51b42 100644 --- a/gdb/frv-tdep.h +++ b/gdb/frv-tdep.h @@ -118,7 +118,4 @@ CORE_ADDR frv_fdpic_find_canonical_descriptor (CORE_ADDR entry_point); needed for TLS support. */ CORE_ADDR frv_fetch_objfile_link_map (struct objfile *objfile); -struct solib_ops; -extern const solib_ops frv_so_ops; - #endif /* GDB_FRV_TDEP_H */ diff --git a/gdb/ft32-tdep.c b/gdb/ft32-tdep.c index f84e225..3384929 100644 --- a/gdb/ft32-tdep.c +++ b/gdb/ft32-tdep.c @@ -621,9 +621,7 @@ ft32_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) /* Register this machine's init routine. */ -void _initialize_ft32_tdep (); -void -_initialize_ft32_tdep () +INIT_GDB_FILE (ft32_tdep) { gdbarch_register (bfd_arch_ft32, ft32_gdbarch_init); } diff --git a/gdb/gcore-1.in b/gdb/gcore-1.in index 1220f4a..2f6eb02 100644 --- a/gdb/gcore-1.in +++ b/gdb/gcore-1.in @@ -34,11 +34,11 @@ data_directory_opt=() function print_usage() { prefix="Usage: $0" - paddin=$(printf '%*s' ${#prefix}) + padding=$(printf '%*s' ${#prefix}) echo "$prefix [-h|--help] [-v|--version]" - echo "$paddin [-a] [-o prefix] [-d data-directory]" - echo "$paddin pid1 [pid2...pidN]" + echo "$padding [-a] [-o prefix] [-d data-directory]" + echo "$padding pid1 [pid2...pidN]" } function print_try_help() { diff --git a/gdb/gcore.c b/gdb/gcore.c index fa15d06..d532652 100644 --- a/gdb/gcore.c +++ b/gdb/gcore.c @@ -861,9 +861,7 @@ gcore_find_signalled_thread () return nullptr; } -void _initialize_gcore (); -void -_initialize_gcore () +INIT_GDB_FILE (gcore) { cmd_list_element *generate_core_file_cmd = add_com ("generate-core-file", class_files, gcore_command, _("\ diff --git a/gdb/gdb-demangle.c b/gdb/gdb-demangle.c index 239306a..c285788 100644 --- a/gdb/gdb-demangle.c +++ b/gdb/gdb-demangle.c @@ -208,9 +208,7 @@ demangle_command (const char *args, int from_tty) error (_("Can't demangle \"%s\""), name); } -void _initialize_gdb_demangle (); -void -_initialize_gdb_demangle () +INIT_GDB_FILE (gdb_demangle) { int i, ndems; diff --git a/gdb/gdb-gdb.py.in b/gdb/gdb-gdb.py.in index 4d96235..7388c6f 100644 --- a/gdb/gdb-gdb.py.in +++ b/gdb/gdb-gdb.py.in @@ -122,7 +122,7 @@ class StructTypePrettyPrinter: class StructMainTypePrettyPrinter: - """Pretty-print an objet of type main_type""" + """Pretty-print an object of type main_type""" def __init__(self, val): self.val = val @@ -164,8 +164,10 @@ class StructMainTypePrettyPrinter: return "physaddr = 0x%x" % loc_val["physaddr"] elif loc_kind == "FIELD_LOC_KIND_PHYSNAME": return "physname = %s" % loc_val["physname"] - elif loc_kind == "FIELD_LOC_KIND_DWARF_BLOCK": - return "dwarf_block = %s" % loc_val["dwarf_block"] + elif loc_kind == "FIELD_LOC_KIND_DWARF_BLOCK_ADDR": + return "dwarf_block_addr = %s" % loc_val["dwarf_block"] + elif loc_kind == "FIELD_LOC_KIND_DWARF_BLOCK_BITPOS": + return "dwarf_block_bitpos = %s" % loc_val["dwarf_block"] else: return "m_loc = ??? (unsupported m_loc_kind value)" diff --git a/gdb/gdb-stabs.h b/gdb/gdb-stabs.h index 2f3a0a5..9909129 100644 --- a/gdb/gdb-stabs.h +++ b/gdb/gdb-stabs.h @@ -20,9 +20,9 @@ #ifndef GDB_GDB_STABS_H #define GDB_GDB_STABS_H -/* During initial symbol readin, we need to have a structure to keep +/* During initial symbol reading, we need to have a structure to keep track of which psymtabs have which bincls in them. This structure - is used during readin to setup the list of dependencies within each + is used during reading to setup the list of dependencies within each partial symbol table. */ struct legacy_psymtab; diff --git a/gdb/gdb_bfd.c b/gdb/gdb_bfd.c index 06d6f5c..2e477eb 100644 --- a/gdb/gdb_bfd.c +++ b/gdb/gdb_bfd.c @@ -1346,9 +1346,7 @@ gdb_bfd_init () error (_("fatal error: libbfd ABI mismatch")); } -void _initialize_gdb_bfd (); -void -_initialize_gdb_bfd () +INIT_GDB_FILE (gdb_bfd) { add_cmd ("bfds", class_maintenance, maintenance_info_bfds, _("\ List the BFDs that are currently open."), diff --git a/gdb/gdb_buildall.sh b/gdb/gdb_buildall.sh index 430aae4..2053333 100644 --- a/gdb/gdb_buildall.sh +++ b/gdb/gdb_buildall.sh @@ -261,7 +261,7 @@ echo "done." # Clean up build directory if necessary. if ${clean} then - echo "cleanning up $dir" + echo "cleaning up $dir" rm -rf ${dir} fi diff --git a/gdb/gdbarch-gen.c b/gdb/gdbarch-gen.c index 32d1659..8f7d359 100644 --- a/gdb/gdbarch-gen.c +++ b/gdb/gdbarch-gen.c @@ -153,11 +153,11 @@ struct gdbarch gdbarch_set_memtags_ftype *set_memtags = default_set_memtags; gdbarch_get_memtag_ftype *get_memtag = default_get_memtag; CORE_ADDR memtag_granule_size = 0; - gdbarch_software_single_step_ftype *software_single_step = nullptr; + gdbarch_get_next_pcs_ftype *get_next_pcs = nullptr; gdbarch_single_step_through_delay_ftype *single_step_through_delay = nullptr; gdbarch_print_insn_ftype *print_insn = default_print_insn; gdbarch_skip_trampoline_code_ftype *skip_trampoline_code = generic_skip_trampoline_code; - const solib_ops * so_ops = &solib_target_so_ops; + gdbarch_make_solib_ops_ftype *make_solib_ops = make_target_solib_ops; gdbarch_skip_solib_resolver_ftype *skip_solib_resolver = generic_skip_solib_resolver; gdbarch_in_solib_return_trampoline_ftype *in_solib_return_trampoline = generic_in_solib_return_trampoline; gdbarch_in_indirect_branch_thunk_ftype *in_indirect_branch_thunk = default_in_indirect_branch_thunk; @@ -421,11 +421,11 @@ verify_gdbarch (struct gdbarch *gdbarch) /* Skip verify of set_memtags, invalid_p == 0. */ /* Skip verify of get_memtag, invalid_p == 0. */ /* Skip verify of memtag_granule_size, invalid_p == 0. */ - /* Skip verify of software_single_step, has predicate. */ + /* Skip verify of get_next_pcs, has predicate. */ /* Skip verify of single_step_through_delay, has predicate. */ /* Skip verify of print_insn, invalid_p == 0. */ /* Skip verify of skip_trampoline_code, invalid_p == 0. */ - /* Skip verify of so_ops, invalid_p == 0. */ + /* Skip verify of make_solib_ops, invalid_p == 0. */ /* Skip verify of skip_solib_resolver, invalid_p == 0. */ /* Skip verify of in_solib_return_trampoline, invalid_p == 0. */ /* Skip verify of in_indirect_branch_thunk, invalid_p == 0. */ @@ -948,11 +948,11 @@ gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file) "gdbarch_dump: memtag_granule_size = %s\n", core_addr_to_string_nz (gdbarch->memtag_granule_size)); gdb_printf (file, - "gdbarch_dump: gdbarch_software_single_step_p() = %d\n", - gdbarch_software_single_step_p (gdbarch)); + "gdbarch_dump: gdbarch_get_next_pcs_p() = %d\n", + gdbarch_get_next_pcs_p (gdbarch)); gdb_printf (file, - "gdbarch_dump: software_single_step = <%s>\n", - host_address_to_string (gdbarch->software_single_step)); + "gdbarch_dump: get_next_pcs = <%s>\n", + host_address_to_string (gdbarch->get_next_pcs)); gdb_printf (file, "gdbarch_dump: gdbarch_single_step_through_delay_p() = %d\n", gdbarch_single_step_through_delay_p (gdbarch)); @@ -966,8 +966,8 @@ gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file) "gdbarch_dump: skip_trampoline_code = <%s>\n", host_address_to_string (gdbarch->skip_trampoline_code)); gdb_printf (file, - "gdbarch_dump: so_ops = %s\n", - host_address_to_string (gdbarch->so_ops)); + "gdbarch_dump: make_solib_ops = <%s>\n", + host_address_to_string (gdbarch->make_solib_ops)); gdb_printf (file, "gdbarch_dump: skip_solib_resolver = <%s>\n", host_address_to_string (gdbarch->skip_solib_resolver)); @@ -3388,27 +3388,27 @@ set_gdbarch_memtag_granule_size (struct gdbarch *gdbarch, } bool -gdbarch_software_single_step_p (struct gdbarch *gdbarch) +gdbarch_get_next_pcs_p (struct gdbarch *gdbarch) { gdb_assert (gdbarch != NULL); - return gdbarch->software_single_step != NULL; + return gdbarch->get_next_pcs != NULL; } std::vector<CORE_ADDR> -gdbarch_software_single_step (struct gdbarch *gdbarch, struct regcache *regcache) +gdbarch_get_next_pcs (struct gdbarch *gdbarch, struct regcache *regcache) { gdb_assert (gdbarch != NULL); - gdb_assert (gdbarch->software_single_step != NULL); + gdb_assert (gdbarch->get_next_pcs != NULL); if (gdbarch_debug >= 2) - gdb_printf (gdb_stdlog, "gdbarch_software_single_step called\n"); - return gdbarch->software_single_step (regcache); + gdb_printf (gdb_stdlog, "gdbarch_get_next_pcs called\n"); + return gdbarch->get_next_pcs (regcache); } void -set_gdbarch_software_single_step (struct gdbarch *gdbarch, - gdbarch_software_single_step_ftype software_single_step) +set_gdbarch_get_next_pcs (struct gdbarch *gdbarch, + gdbarch_get_next_pcs_ftype get_next_pcs) { - gdbarch->software_single_step = software_single_step; + gdbarch->get_next_pcs = get_next_pcs; } bool @@ -3469,21 +3469,21 @@ set_gdbarch_skip_trampoline_code (struct gdbarch *gdbarch, gdbarch->skip_trampoline_code = skip_trampoline_code; } -const solib_ops * -gdbarch_so_ops (struct gdbarch *gdbarch) +solib_ops_up +gdbarch_make_solib_ops (struct gdbarch *gdbarch) { gdb_assert (gdbarch != NULL); - /* Skip verify of so_ops, invalid_p == 0. */ + gdb_assert (gdbarch->make_solib_ops != NULL); if (gdbarch_debug >= 2) - gdb_printf (gdb_stdlog, "gdbarch_so_ops called\n"); - return gdbarch->so_ops; + gdb_printf (gdb_stdlog, "gdbarch_make_solib_ops called\n"); + return gdbarch->make_solib_ops (); } void -set_gdbarch_so_ops (struct gdbarch *gdbarch, - const solib_ops * so_ops) +set_gdbarch_make_solib_ops (struct gdbarch *gdbarch, + gdbarch_make_solib_ops_ftype make_solib_ops) { - gdbarch->so_ops = so_ops; + gdbarch->make_solib_ops = make_solib_ops; } CORE_ADDR diff --git a/gdb/gdbarch-gen.h b/gdb/gdbarch-gen.h index 313a8f1..148abfa 100644 --- a/gdb/gdbarch-gen.h +++ b/gdb/gdbarch-gen.h @@ -792,11 +792,11 @@ extern void set_gdbarch_memtag_granule_size (struct gdbarch *gdbarch, CORE_ADDR the condition is true, so that we ensure forward progress when stepping past a conditional branch to self. */ -extern bool gdbarch_software_single_step_p (struct gdbarch *gdbarch); +extern bool gdbarch_get_next_pcs_p (struct gdbarch *gdbarch); -typedef std::vector<CORE_ADDR> (gdbarch_software_single_step_ftype) (struct regcache *regcache); -extern std::vector<CORE_ADDR> gdbarch_software_single_step (struct gdbarch *gdbarch, struct regcache *regcache); -extern void set_gdbarch_software_single_step (struct gdbarch *gdbarch, gdbarch_software_single_step_ftype *software_single_step); +typedef std::vector<CORE_ADDR> (gdbarch_get_next_pcs_ftype) (struct regcache *regcache); +extern std::vector<CORE_ADDR> gdbarch_get_next_pcs (struct gdbarch *gdbarch, struct regcache *regcache); +extern void set_gdbarch_get_next_pcs (struct gdbarch *gdbarch, gdbarch_get_next_pcs_ftype *get_next_pcs); /* Return non-zero if the processor is executing a delay slot and a further single-step is needed before the instruction finishes. */ @@ -818,10 +818,11 @@ typedef CORE_ADDR (gdbarch_skip_trampoline_code_ftype) (const frame_info_ptr &fr extern CORE_ADDR gdbarch_skip_trampoline_code (struct gdbarch *gdbarch, const frame_info_ptr &frame, CORE_ADDR pc); extern void set_gdbarch_skip_trampoline_code (struct gdbarch *gdbarch, gdbarch_skip_trampoline_code_ftype *skip_trampoline_code); -/* Vtable of solib operations functions. */ +/* Return a newly-allocated solib_ops object capable of providing the solibs for this architecture. */ -extern const solib_ops * gdbarch_so_ops (struct gdbarch *gdbarch); -extern void set_gdbarch_so_ops (struct gdbarch *gdbarch, const solib_ops * so_ops); +typedef solib_ops_up (gdbarch_make_solib_ops_ftype) (); +extern solib_ops_up gdbarch_make_solib_ops (struct gdbarch *gdbarch); +extern void set_gdbarch_make_solib_ops (struct gdbarch *gdbarch, gdbarch_make_solib_ops_ftype *make_solib_ops); /* If in_solib_dynsym_resolve_code() returns true, and SKIP_SOLIB_RESOLVER evaluates non-zero, this is the address where the debugger will place @@ -1147,7 +1148,7 @@ extern void set_gdbarch_displaced_step_copy_insn (struct gdbarch *gdbarch, gdbar the displaced instruction buffer). The default implementation returns false on all targets that provide a - gdbarch_software_single_step routine, and true otherwise. */ + gdbarch_get_next_pcs routine, and true otherwise. */ typedef bool (gdbarch_displaced_step_hw_singlestep_ftype) (struct gdbarch *gdbarch); extern bool gdbarch_displaced_step_hw_singlestep (struct gdbarch *gdbarch); diff --git a/gdb/gdbarch-selftests.c b/gdb/gdbarch-selftests.c index c370204..5c94f60 100644 --- a/gdb/gdbarch-selftests.c +++ b/gdb/gdbarch-selftests.c @@ -183,9 +183,7 @@ check_stack_growth (struct gdbarch *gdbarch) } /* namespace selftests */ -void _initialize_gdbarch_selftests (); -void -_initialize_gdbarch_selftests () +INIT_GDB_FILE (gdbarch_selftests) { selftests::register_test_foreach_arch ("register_to_value", selftests::register_to_value_test); diff --git a/gdb/gdbarch.h b/gdb/gdbarch.h index 9feb2cc..6accbd2 100644 --- a/gdb/gdbarch.h +++ b/gdb/gdbarch.h @@ -30,6 +30,7 @@ #include "displaced-stepping.h" #include "gdbsupport/gdb-checked-static-cast.h" #include "registry.h" +#include "solib.h" struct floatformat; struct ui_file; diff --git a/gdb/gdbarch_components.py b/gdb/gdbarch_components.py index ec09d95..ae9e14a 100644 --- a/gdb/gdbarch_components.py +++ b/gdb/gdbarch_components.py @@ -1395,7 +1395,7 @@ the condition is true, so that we ensure forward progress when stepping past a conditional branch to self. """, type="std::vector<CORE_ADDR>", - name="software_single_step", + name="get_next_pcs", params=[("struct regcache *", "regcache")], predicate=True, ) @@ -1431,12 +1431,12 @@ Function( invalid=False, ) -Value( - comment="Vtable of solib operations functions.", - type="const solib_ops *", - name="so_ops", - predefault="&solib_target_so_ops", - printer="host_address_to_string (gdbarch->so_ops)", +Function( + comment="Return a newly-allocated solib_ops object capable of providing the solibs for this architecture.", + type="solib_ops_up", + name="make_solib_ops", + params=[], + predefault="make_target_solib_ops", invalid=False, ) @@ -1891,7 +1891,7 @@ receive control again (e.g. by placing a software breakpoint instruction into the displaced instruction buffer). The default implementation returns false on all targets that provide a -gdbarch_software_single_step routine, and true otherwise. +gdbarch_get_next_pcs routine, and true otherwise. """, type="bool", name="displaced_step_hw_singlestep", diff --git a/gdb/gdbtypes.c b/gdb/gdbtypes.c index a241223..24e6d0b 100644 --- a/gdb/gdbtypes.c +++ b/gdb/gdbtypes.c @@ -1080,10 +1080,10 @@ get_discrete_low_bound (struct type *type) entries. */ LONGEST low = type->field (0).loc_enumval (); - for (int i = 0; i < type->num_fields (); i++) + for (const auto &field : type->fields ()) { - if (type->field (i).loc_enumval () < low) - low = type->field (i).loc_enumval (); + if (field.loc_enumval () < low) + low = field.loc_enumval (); } return low; @@ -1147,10 +1147,10 @@ get_discrete_high_bound (struct type *type) entries. */ LONGEST high = type->field (0).loc_enumval (); - for (int i = 0; i < type->num_fields (); i++) + for (const auto &field : type->fields ()) { - if (type->field (i).loc_enumval () > high) - high = type->field (i).loc_enumval (); + if (field.loc_enumval () > high) + high = field.loc_enumval (); } return high; @@ -1602,15 +1602,15 @@ smash_to_methodptr_type (struct type *type, struct type *to_type) void smash_to_method_type (struct type *type, struct type *self_type, - struct type *to_type, struct field *args, - int nargs, int varargs) + struct type *to_type, gdb::array_view<struct field> args, + int varargs) { smash_type (type); type->set_code (TYPE_CODE_METHOD); type->set_target_type (to_type); set_type_self_type (type, self_type); - type->set_fields (args); - type->set_num_fields (nargs); + type->set_fields (args.data ()); + type->set_num_fields (args.size ()); if (varargs) type->set_has_varargs (true); @@ -2121,7 +2121,7 @@ is_dynamic_type_internal (struct type *type, bool top_level) return true; /* If the field is at a fixed offset, then it is not dynamic. */ - if (type->field (i).loc_kind () != FIELD_LOC_KIND_DWARF_BLOCK) + if (!type->field (i).loc_is_dwarf_block ()) continue; /* Do not consider C++ virtual base types to be dynamic due to the field's offset being dynamic; these are @@ -2494,23 +2494,22 @@ resolve_dynamic_union (struct type *type, const frame_info_ptr &frame) { struct type *resolved_type; - int i; unsigned int max_len = 0; gdb_assert (type->code () == TYPE_CODE_UNION); resolved_type = copy_type (type); resolved_type->copy_fields (type); - for (i = 0; i < resolved_type->num_fields (); ++i) + for (auto &field : resolved_type->fields ()) { struct type *t; - if (type->field (i).is_static ()) + if (field.is_static ()) continue; - t = resolve_dynamic_type_internal (resolved_type->field (i).type (), - addr_stack, frame, false); - resolved_type->field (i).set_type (t); + t = resolve_dynamic_type_internal (field.type (), addr_stack, + frame, false); + field.set_type (t); struct type *real_type = check_typedef (t); if (real_type->length () > max_len) @@ -2723,7 +2722,7 @@ resolve_dynamic_field (struct field &field, { gdb_assert (!field.is_static ()); - if (field.loc_kind () == FIELD_LOC_KIND_DWARF_BLOCK) + if (field.loc_is_dwarf_block ()) { dwarf2_locexpr_baton *field_loc = field.loc_dwarf_block (); @@ -2736,10 +2735,15 @@ resolve_dynamic_field (struct field &field, prop.set_locexpr (&baton); CORE_ADDR vals[1] = {addr_stack->addr}; - CORE_ADDR addr; - if (dwarf2_evaluate_property (&prop, frame, addr_stack, &addr, vals)) + CORE_ADDR addr_or_bitpos; + if (dwarf2_evaluate_property (&prop, frame, addr_stack, + &addr_or_bitpos, vals)) { - field.set_loc_bitpos (TARGET_CHAR_BIT * (addr - addr_stack->addr)); + if (field.loc_kind () == FIELD_LOC_KIND_DWARF_BLOCK_ADDR) + field.set_loc_bitpos (TARGET_CHAR_BIT + * (addr_or_bitpos - addr_stack->addr)); + else + field.set_loc_bitpos (addr_or_bitpos); if (field_loc->is_field_location) { @@ -2786,7 +2790,6 @@ resolve_dynamic_struct (struct type *type, const frame_info_ptr &frame) { struct type *resolved_type; - int i; unsigned resolved_type_bit_length = 0; gdb_assert (type->code () == TYPE_CODE_STRUCT); @@ -2807,22 +2810,21 @@ resolve_dynamic_struct (struct type *type, resolved_type->copy_fields (type); } - for (i = 0; i < resolved_type->num_fields (); ++i) + for (auto &field : resolved_type->fields ()) { unsigned new_bit_length; - if (resolved_type->field (i).is_static ()) + if (field.is_static ()) continue; - resolve_dynamic_field (resolved_type->field (i), addr_stack, frame); + resolve_dynamic_field (field, addr_stack, frame); - new_bit_length = resolved_type->field (i).loc_bitpos (); - if (resolved_type->field (i).bitsize () != 0) - new_bit_length += resolved_type->field (i).bitsize (); + new_bit_length = field.loc_bitpos (); + if (field.bitsize () != 0) + new_bit_length += field.bitsize (); else { - struct type *real_type - = check_typedef (resolved_type->field (i).type ()); + struct type *real_type = check_typedef (field.type ()); new_bit_length += (real_type->length () * TARGET_CHAR_BIT); } @@ -3389,7 +3391,8 @@ check_stub_method (struct type *type, int method_id, int signature_id) /* MTYPE may currently be a function (TYPE_CODE_FUNC). We want a method (TYPE_CODE_METHOD). */ smash_to_method_type (mtype, type, mtype->target_type (), - argtypes, argcount, p[-2] == '.'); + gdb::make_array_view (argtypes, argcount), + p[-2] == '.'); mtype->set_is_stub (false); TYPE_FN_FIELD_STUB (f, signature_id) = 0; } @@ -3693,12 +3696,12 @@ type_align (struct type *type) case TYPE_CODE_UNION: { int number_of_non_static_fields = 0; - for (unsigned i = 0; i < type->num_fields (); ++i) + for (const auto &field : type->fields ()) { - if (!type->field (i).is_static ()) + if (!field.is_static ()) { number_of_non_static_fields++; - ULONGEST f_align = type_align (type->field (i).type ()); + ULONGEST f_align = type_align (field.type ()); if (f_align == 0) { /* Don't pretend we know something we don't. */ @@ -4415,7 +4418,8 @@ check_types_equal (struct type *type1, struct type *type2, field2->loc_physname ())) return false; break; - case FIELD_LOC_KIND_DWARF_BLOCK: + case FIELD_LOC_KIND_DWARF_BLOCK_ADDR: + case FIELD_LOC_KIND_DWARF_BLOCK_BITPOS: { struct dwarf2_locexpr_baton *block1, *block2; @@ -5032,19 +5036,14 @@ rank_one_type (struct type *parm, struct type *arg, struct value *value) situation. */ static void -print_args (struct field *args, int nargs, int spaces) +print_args (gdb::array_view<struct field> args, int spaces) { - if (args != NULL) + for (int i = 0; i < args.size (); i++) { - int i; - - for (i = 0; i < nargs; i++) - { - gdb_printf - ("%*s[%d] name '%s'\n", spaces, "", i, - args[i].name () != NULL ? args[i].name () : "<NULL>"); - recursive_dump_type (args[i].type (), spaces + 2); - } + gdb_printf + ("%*s[%d] name '%s'\n", spaces, "", i, + args[i].name () != NULL ? args[i].name () : "<NULL>"); + recursive_dump_type (args[i].type (), spaces + 2); } } @@ -5085,9 +5084,8 @@ dump_fn_fieldlists (struct type *type, int spaces) gdb_printf ("%*sargs %s\n", spaces + 8, "", - host_address_to_string (TYPE_FN_FIELD_ARGS (f, overload_idx))); + host_address_to_string (TYPE_FN_FIELD_ARGS (f, overload_idx).data ())); print_args (TYPE_FN_FIELD_ARGS (f, overload_idx), - TYPE_FN_FIELD_TYPE (f, overload_idx)->num_fields (), spaces + 8 + 2); gdb_printf ("%*sfcontext %s\n", spaces + 8, "", @@ -5369,7 +5367,7 @@ recursive_dump_type (struct type *type, int spaces) } gdb_printf ("\n"); } - gdb_printf ("%s\n", host_address_to_string (type->fields ())); + gdb_printf ("%s\n", host_address_to_string (type->fields ().data ())); for (idx = 0; idx < type->num_fields (); idx++) { field &fld = type->field (idx); @@ -5560,8 +5558,12 @@ copy_type_recursive (struct type *type, copied_types_hash_t &copied_types) new_type->field (i).set_loc_physname (xstrdup (type->field (i).loc_physname ())); break; - case FIELD_LOC_KIND_DWARF_BLOCK: - new_type->field (i).set_loc_dwarf_block + case FIELD_LOC_KIND_DWARF_BLOCK_ADDR: + new_type->field (i).set_loc_dwarf_block_addr + (type->field (i).loc_dwarf_block ()); + break; + case FIELD_LOC_KIND_DWARF_BLOCK_BITPOS: + new_type->field (i).set_loc_dwarf_block_bitpos (type->field (i).loc_dwarf_block ()); break; default: @@ -5746,7 +5748,7 @@ append_composite_type_field_raw (struct type *t, const char *name, struct field *f; t->set_num_fields (t->num_fields () + 1); - t->set_fields (XRESIZEVEC (struct field, t->fields (), + t->set_fields (XRESIZEVEC (struct field, t->fields ().data (), t->num_fields ())); f = &t->field (t->num_fields () - 1); memset (f, 0, sizeof f[0]); @@ -5897,7 +5899,7 @@ type::alloc_fields (unsigned int nfields, bool init) return; } - size_t size = nfields * sizeof (*this->fields ()); + size_t size = nfields * sizeof (struct field); struct field *fields = (struct field *) (init ? TYPE_ZALLOC (this, size) @@ -5916,8 +5918,8 @@ type::copy_fields (struct type *src) if (nfields == 0) return; - size_t size = nfields * sizeof (*this->fields ()); - memcpy (this->fields (), src->fields (), size); + size_t size = nfields * sizeof (struct field); + memcpy (this->fields ().data (), src->fields ().data (), size); } /* See gdbtypes.h. */ @@ -5930,8 +5932,8 @@ type::copy_fields (std::vector<struct field> &src) if (nfields == 0) return; - size_t size = nfields * sizeof (*this->fields ()); - memcpy (this->fields (), src.data (), size); + size_t size = nfields * sizeof (struct field); + memcpy (this->fields ().data (), src.data (), size); } /* See gdbtypes.h. */ @@ -6174,17 +6176,25 @@ builtin_type (struct objfile *objfile) return builtin_type (objfile->arch ()); } -/* See gdbtypes.h. */ +/* See dwarf2/call-site.h. */ CORE_ADDR call_site::pc () const { + /* dwarf2_per_objfile is defined in dwarf/read.c, so if that is disabled + at configure time, we won't be able to use this relocate function. + This is dwarf-specific, and would ideally be in call-site.h, but + including dwarf2/read.h in dwarf2/call-site.h will lead to things being + included in the wrong order and many compilation errors will happen. + This is the next best thing. */ +#if defined(DWARF_FORMAT_AVAILABLE) return per_objfile->relocate (m_unrelocated_pc); +#else + gdb_assert_not_reached ("unexpected call_site object found"); +#endif } -void _initialize_gdbtypes (); -void -_initialize_gdbtypes () +INIT_GDB_FILE (gdbtypes) { add_setshow_zuinteger_cmd ("overload", no_class, &overload_debug, _("Set debugging of C++ overloading."), diff --git a/gdb/gdbtypes.h b/gdb/gdbtypes.h index 67b4bf0..75c77b3 100644 --- a/gdb/gdbtypes.h +++ b/gdb/gdbtypes.h @@ -480,7 +480,10 @@ enum field_loc_kind FIELD_LOC_KIND_ENUMVAL, /**< enumval */ FIELD_LOC_KIND_PHYSADDR, /**< physaddr */ FIELD_LOC_KIND_PHYSNAME, /**< physname */ - FIELD_LOC_KIND_DWARF_BLOCK /**< dwarf_block */ + /* A DWARF block that computes the address of the field. */ + FIELD_LOC_KIND_DWARF_BLOCK_ADDR, /**< dwarf_block */ + /* A DWARF block that computes the bit offset of the field. */ + FIELD_LOC_KIND_DWARF_BLOCK_BITPOS, }; /* * A discriminant to determine which field in the @@ -616,6 +619,13 @@ struct field return m_loc_kind; } + /* Return true if this location has either "DWARF block" kind. */ + bool loc_is_dwarf_block () const + { + return (m_loc_kind == FIELD_LOC_KIND_DWARF_BLOCK_ADDR + || m_loc_kind == FIELD_LOC_KIND_DWARF_BLOCK_BITPOS); + } + LONGEST loc_bitpos () const { gdb_assert (m_loc_kind == FIELD_LOC_KIND_BITPOS); @@ -666,13 +676,19 @@ struct field dwarf2_locexpr_baton *loc_dwarf_block () const { - gdb_assert (m_loc_kind == FIELD_LOC_KIND_DWARF_BLOCK); + gdb_assert (loc_is_dwarf_block ()); return m_loc.dwarf_block; } - void set_loc_dwarf_block (dwarf2_locexpr_baton *dwarf_block) + void set_loc_dwarf_block_addr (dwarf2_locexpr_baton *dwarf_block) + { + m_loc_kind = FIELD_LOC_KIND_DWARF_BLOCK_ADDR; + m_loc.dwarf_block = dwarf_block; + } + + void set_loc_dwarf_block_bitpos (dwarf2_locexpr_baton *dwarf_block) { - m_loc_kind = FIELD_LOC_KIND_DWARF_BLOCK; + m_loc_kind = FIELD_LOC_KIND_DWARF_BLOCK_BITPOS; m_loc.dwarf_block = dwarf_block; } @@ -1064,12 +1080,6 @@ struct type this->main_type->m_nfields = num_fields; } - /* Get the fields array of this type. */ - struct field *fields () const - { - return this->main_type->flds_bnds.fields; - } - /* Get the field at index IDX. */ struct field &field (int idx) const { @@ -1077,6 +1087,13 @@ struct type return this->fields ()[idx]; } + /* Return an array view of the fields. */ + gdb::array_view<struct field> fields () const + { + return gdb::make_array_view (this->main_type->flds_bnds.fields, + num_fields ()); + } + /* Set the fields array of this type. */ void set_fields (struct field *fields) { @@ -2454,8 +2471,9 @@ extern struct type *lookup_memberptr_type (struct type *, struct type *); extern struct type *lookup_methodptr_type (struct type *); extern void smash_to_method_type (struct type *type, struct type *self_type, - struct type *to_type, struct field *args, - int nargs, int varargs); + struct type *to_type, + gdb::array_view<struct field> args, + int varargs); extern void smash_to_memberptr_type (struct type *, struct type *, struct type *); diff --git a/gdb/gmp-utils.c b/gdb/gmp-utils.c index b48e97c..5c5423a 100644 --- a/gdb/gmp-utils.c +++ b/gdb/gmp-utils.c @@ -250,10 +250,7 @@ xfree_for_gmp (void *ptr, size_t size) xfree (ptr); } -void _initialize_gmp_utils (); - -void -_initialize_gmp_utils () +INIT_GDB_FILE (gmp_utils) { /* Tell GMP to use GDB's memory management routines. */ mp_set_memory_functions (xmalloc, xrealloc_for_gmp, xfree_for_gmp); diff --git a/gdb/gnu-nat.c b/gdb/gnu-nat.c index ea07dd6..dd639fe 100644 --- a/gdb/gnu-nat.c +++ b/gdb/gnu-nat.c @@ -3434,9 +3434,7 @@ to the thread's initial suspend-count when gdb notices the threads."), &thread_cmd_list); } -void _initialize_gnu_nat (); -void -_initialize_gnu_nat () +INIT_GDB_FILE (gnu_nat) { proc_server = getproc (); diff --git a/gdb/gnu-v2-abi.c b/gdb/gnu-v2-abi.c index ab9f53b..9246788 100644 --- a/gdb/gnu-v2-abi.c +++ b/gdb/gnu-v2-abi.c @@ -265,15 +265,9 @@ gnuv2_value_rtti_type (struct value *v, int *full, LONGEST *top, int *using_enc) if (top && ((*top) >0)) { if (rtti_type->length () > known_type->length ()) - { - if (full) - *full=0; - } + *full = 0; else - { - if (full) - *full=1; - } + *full = 1; } } else @@ -411,9 +405,7 @@ init_gnuv2_ops (void) gnu_v2_abi_ops.baseclass_offset = gnuv2_baseclass_offset; } -void _initialize_gnu_v2_abi (); -void -_initialize_gnu_v2_abi () +INIT_GDB_FILE (gnu_v2_abi) { init_gnuv2_ops (); register_cp_abi (&gnu_v2_abi_ops); diff --git a/gdb/gnu-v3-abi.c b/gdb/gnu-v3-abi.c index 4f53e9f..e3818d9 100644 --- a/gdb/gnu-v3-abi.c +++ b/gdb/gnu-v3-abi.c @@ -476,7 +476,7 @@ gnuv3_baseclass_offset (struct type *type, int index, return TYPE_BASECLASS_BITPOS (type, index) / 8; /* If we have a DWARF expression for the offset, evaluate it. */ - if (type->field (index).loc_kind () == FIELD_LOC_KIND_DWARF_BLOCK) + if (type->field (index).loc_kind () == FIELD_LOC_KIND_DWARF_BLOCK_ADDR) { struct dwarf2_property_baton baton; baton.property_type @@ -1570,9 +1570,7 @@ init_gnuv3_ops (void) gnu_v3_abi_ops.pass_by_reference = gnuv3_pass_by_reference; } -void _initialize_gnu_v3_abi (); -void -_initialize_gnu_v3_abi () +INIT_GDB_FILE (gnu_v3_abi) { init_gnuv3_ops (); diff --git a/gdb/go-exp.y b/gdb/go-exp.y index 8823503..a617242 100644 --- a/gdb/go-exp.y +++ b/gdb/go-exp.y @@ -1290,7 +1290,7 @@ package_name_p (const char *name, const struct block *block) &is_a_field_of_this).symbol; if (sym - && sym->aclass () == LOC_TYPEDEF + && sym->loc_class () == LOC_TYPEDEF && sym->type ()->code () == TYPE_CODE_MODULE) return 1; diff --git a/gdb/go32-nat.c b/gdb/go32-nat.c index 8dcb22d..4d8e6c9 100644 --- a/gdb/go32-nat.c +++ b/gdb/go32-nat.c @@ -2057,9 +2057,7 @@ go32_pte_for_address (const char *arg, int from_tty) static struct cmd_list_element *info_dos_cmdlist = NULL; -void _initialize_go32_nat (); -void -_initialize_go32_nat () +INIT_GDB_FILE (go32_nat) { x86_dr_low.set_control = go32_set_dr7; x86_dr_low.set_addr = go32_set_dr; diff --git a/gdb/guile/guile-internal.h b/gdb/guile/guile-internal.h index 3101882..60a8bf3 100644 --- a/gdb/guile/guile-internal.h +++ b/gdb/guile/guile-internal.h @@ -449,10 +449,11 @@ extern const struct block *bkscm_scm_to_block /* scm-cmd.c */ -extern char *gdbscm_parse_command_name (const char *name, - const char *func_name, int arg_pos, - struct cmd_list_element ***base_list, - struct cmd_list_element **start_list); +extern char *gdbscm_parse_command_name + (const char *name, const char *func_name, int arg_pos, + struct cmd_list_element ***base_list, + struct cmd_list_element **start_list, + struct cmd_list_element **prefix_cmd = nullptr); extern int gdbscm_valid_command_class_p (int command_class); diff --git a/gdb/guile/guile.c b/gdb/guile/guile.c index 1803df0..66a74b3 100644 --- a/gdb/guile/guile.c +++ b/gdb/guile/guile.c @@ -827,9 +827,7 @@ message == an error message without a stack will be printed."), &set_guile_list, &show_guile_list); } -void _initialize_guile (); -void -_initialize_guile () +INIT_GDB_FILE (guile) { install_gdb_commands (); } diff --git a/gdb/guile/scm-cmd.c b/gdb/guile/scm-cmd.c index 4757872..19fb742 100644 --- a/gdb/guile/scm-cmd.c +++ b/gdb/guile/scm-cmd.c @@ -457,11 +457,13 @@ cmdscm_completer (struct cmd_list_element *command, name of the new command. All earlier words must be existing prefix commands. - *BASE_LIST is set to the final prefix command's list of - *sub-commands. + *BASE_LIST is set to the final prefix command's list of sub-commands. START_LIST is the list in which the search starts. + When PREFIX_CMD is not NULL then *PREFIX_CMD is set to the prefix + command itself, or NULL, if there is no prefix command. + This function returns the xmalloc()d name of the new command. On error a Scheme exception is thrown. */ @@ -469,13 +471,17 @@ char * gdbscm_parse_command_name (const char *name, const char *func_name, int arg_pos, struct cmd_list_element ***base_list, - struct cmd_list_element **start_list) + struct cmd_list_element **start_list, + struct cmd_list_element **prefix_cmd) { struct cmd_list_element *elt; int len = strlen (name); int i, lastchar; char *msg; + if (prefix_cmd != nullptr) + *prefix_cmd = nullptr; + /* Skip trailing whitespace. */ for (i = len - 1; i >= 0 && (name[i] == ' ' || name[i] == '\t'); --i) ; @@ -490,9 +496,9 @@ gdbscm_parse_command_name (const char *name, /* Find first character of the final word. */ for (; i > 0 && valid_cmd_char_p (name[i - 1]); --i) ; - gdb::unique_xmalloc_ptr<char> result ((char *) xmalloc (lastchar - i + 2)); - memcpy (result.get (), &name[i], lastchar - i + 1); - result.get ()[lastchar - i + 1] = '\0'; + + gdb::unique_xmalloc_ptr<char> result + = make_unique_xstrndup (&name[i], lastchar - i + 1); /* Skip whitespace again. */ for (--i; i >= 0 && (name[i] == ' ' || name[i] == '\t'); --i) @@ -503,18 +509,21 @@ gdbscm_parse_command_name (const char *name, return result.release (); } - gdb::unique_xmalloc_ptr<char> prefix_text ((char *) xmalloc (i + 2)); - memcpy (prefix_text.get (), name, i + 1); - prefix_text.get ()[i + 1] = '\0'; + gdb::unique_xmalloc_ptr<char> prefix_text + = make_unique_xstrndup (name, i + 1); const char *prefix_text2 = prefix_text.get (); elt = lookup_cmd_1 (&prefix_text2, *start_list, NULL, NULL, 1); - if (elt == NULL || elt == CMD_LIST_AMBIGUOUS) + if (elt == nullptr || elt == CMD_LIST_AMBIGUOUS || *prefix_text2 != '\0') { msg = xstrprintf (_("could not find command prefix '%s'"), prefix_text.get ()).release (); scm_dynwind_begin ((scm_t_dynwind_flags) 0); gdbscm_dynwind_xfree (msg); + /* Release memory now as the destructors will not be run when the + guile exception is thrown. */ + result = nullptr; + prefix_text = nullptr; gdbscm_out_of_range_error (func_name, arg_pos, gdbscm_scm_from_c_string (name), msg); } @@ -522,6 +531,8 @@ gdbscm_parse_command_name (const char *name, if (elt->is_prefix ()) { *base_list = elt->subcommands; + if (prefix_cmd != nullptr) + *prefix_cmd = elt; return result.release (); } @@ -529,6 +540,10 @@ gdbscm_parse_command_name (const char *name, prefix_text.get ()).release (); scm_dynwind_begin ((scm_t_dynwind_flags) 0); gdbscm_dynwind_xfree (msg); + /* Release memory now as the destructors will not be run when the guile + exception is thrown. */ + result = nullptr; + prefix_text = nullptr; gdbscm_out_of_range_error (func_name, arg_pos, gdbscm_scm_from_c_string (name), msg); /* NOTREACHED */ @@ -743,8 +758,9 @@ gdbscm_register_command_x (SCM self) if (cmdscm_is_valid (c_smob)) scm_misc_error (FUNC_NAME, _("command is already registered"), SCM_EOL); + struct cmd_list_element *prefix_cmd = nullptr; cmd_name = gdbscm_parse_command_name (c_smob->name, FUNC_NAME, SCM_ARG1, - &cmd_list, &cmdlist); + &cmd_list, &cmdlist, &prefix_cmd); c_smob->cmd_name = gdbscm_gc_xstrdup (cmd_name); xfree (cmd_name); @@ -753,18 +769,50 @@ gdbscm_register_command_x (SCM self) { if (c_smob->is_prefix) { - /* If we have our own "invoke" method, then allow unknown - sub-commands. */ - int allow_unknown = gdbscm_is_true (c_smob->invoke); + bool has_invoke = gdbscm_is_true (c_smob->invoke) == 1; - cmd = add_prefix_cmd (c_smob->cmd_name, c_smob->cmd_class, - NULL, c_smob->doc, &c_smob->sub_list, - allow_unknown, cmd_list); + if (has_invoke) + { + cmd = add_prefix_cmd (c_smob->cmd_name, c_smob->cmd_class, + NULL, c_smob->doc, &c_smob->sub_list, + 1 /* allow_unknown */, cmd_list); + cmd->func = cmdscm_function; + } + else + { + /* If there is no 'invoke' method, then create the prefix + using the standard prefix callbacks. This means that for + 'set prefix' the user will get the help text listing all + of the sub-commands, and for 'show prefix', the user will + see all of the sub-command values. */ + if (prefix_cmd != nullptr) + { + while (prefix_cmd->prefix != nullptr) + prefix_cmd = prefix_cmd->prefix; + } + + bool is_show = (prefix_cmd != nullptr + && prefix_cmd->subcommands == &showlist); + + if (is_show) + cmd = add_show_prefix_cmd (c_smob->cmd_name, + c_smob->cmd_class, + c_smob->doc, + &c_smob->sub_list, + 0 /* allow_unknown */, cmd_list); + else + cmd = add_basic_prefix_cmd (c_smob->cmd_name, + c_smob->cmd_class, + c_smob->doc, + &c_smob->sub_list, + 0 /* allow_unknown */, cmd_list); + } } else { cmd = add_cmd (c_smob->cmd_name, c_smob->cmd_class, c_smob->doc, cmd_list); + cmd->func = cmdscm_function; } } catch (const gdb_exception &except) @@ -777,7 +825,6 @@ gdbscm_register_command_x (SCM self) So no more errors after this point. */ /* There appears to be no API to set this. */ - cmd->func = cmdscm_function; cmd->destroyer = cmdscm_destroyer; c_smob->command = cmd; diff --git a/gdb/guile/scm-param.c b/gdb/guile/scm-param.c index 65226ec..5137847 100644 --- a/gdb/guile/scm-param.c +++ b/gdb/guile/scm-param.c @@ -308,13 +308,37 @@ pascm_is_valid (param_smob *p_smob) return p_smob->commands.set != nullptr; } -/* A helper function which return the default documentation string for - a parameter (which is to say that it's undocumented). */ + +/* The different types of documentation string. */ + +enum doc_string_type +{ + doc_string_set, + doc_string_show, + doc_string_description +}; + +/* A helper function which returns the default documentation string for + a parameter CMD_NAME. The DOC_TYPE indicates which type of + documentation string is needed. The returned string is dynamically + allocated. */ static char * -get_doc_string (void) +get_doc_string (doc_string_type doc_type, const char *cmd_name) { - return xstrdup (_("This command is not documented.")); + if (doc_type == doc_string_description) + return xstrdup (_("This command is not documented.")); + else + { + gdb_assert (cmd_name != nullptr); + + if (doc_type == doc_string_show) + return xstrprintf (_("Show the current value of '%s'."), + cmd_name).release (); + else + return xstrprintf (_("Set the current value of '%s'."), + cmd_name).release (); + } } /* Subroutine of pascm_set_func, pascm_show_func to simplify them. @@ -990,11 +1014,14 @@ gdbscm_make_parameter (SCM name_scm, SCM rest) &show_doc_arg_pos, &show_doc, &initial_value_arg_pos, &initial_value_scm); - /* If doc is NULL, leave it NULL. See add_setshow_cmd_full. */ + if (doc == nullptr) + doc = get_doc_string (doc_string_description, nullptr); + else if (*doc == '\0') + doc = nullptr; if (set_doc == NULL) - set_doc = get_doc_string (); + set_doc = get_doc_string (doc_string_set, name); if (show_doc == NULL) - show_doc = get_doc_string (); + show_doc = get_doc_string (doc_string_show, name); s = name; name = gdbscm_canonicalize_command_name (s, 0); diff --git a/gdb/guile/scm-symbol.c b/gdb/guile/scm-symbol.c index 8c2ae24..1d3fb29 100644 --- a/gdb/guile/scm-symbol.c +++ b/gdb/guile/scm-symbol.c @@ -405,7 +405,7 @@ gdbscm_symbol_addr_class (SCM self) = syscm_get_valid_symbol_smob_arg_unsafe (self, SCM_ARG1, FUNC_NAME); const struct symbol *symbol = s_smob->symbol; - return scm_from_int (symbol->aclass ()); + return scm_from_int (symbol->loc_class ()); } /* (symbol-argument? <gdb:symbol>) -> boolean */ @@ -428,11 +428,9 @@ gdbscm_symbol_constant_p (SCM self) symbol_smob *s_smob = syscm_get_valid_symbol_smob_arg_unsafe (self, SCM_ARG1, FUNC_NAME); const struct symbol *symbol = s_smob->symbol; - enum address_class theclass; + location_class loc_class = symbol->loc_class (); - theclass = symbol->aclass (); - - return scm_from_bool (theclass == LOC_CONST || theclass == LOC_CONST_BYTES); + return scm_from_bool (loc_class == LOC_CONST || loc_class == LOC_CONST_BYTES); } /* (symbol-function? <gdb:symbol>) -> boolean */ @@ -443,11 +441,9 @@ gdbscm_symbol_function_p (SCM self) symbol_smob *s_smob = syscm_get_valid_symbol_smob_arg_unsafe (self, SCM_ARG1, FUNC_NAME); const struct symbol *symbol = s_smob->symbol; - enum address_class theclass; - - theclass = symbol->aclass (); + location_class loc_class = symbol->loc_class (); - return scm_from_bool (theclass == LOC_BLOCK); + return scm_from_bool (loc_class == LOC_BLOCK); } /* (symbol-variable? <gdb:symbol>) -> boolean */ @@ -458,14 +454,12 @@ gdbscm_symbol_variable_p (SCM self) symbol_smob *s_smob = syscm_get_valid_symbol_smob_arg_unsafe (self, SCM_ARG1, FUNC_NAME); const struct symbol *symbol = s_smob->symbol; - enum address_class theclass; - - theclass = symbol->aclass (); + location_class loc_class = symbol->loc_class (); return scm_from_bool (!symbol->is_argument () - && (theclass == LOC_LOCAL || theclass == LOC_REGISTER - || theclass == LOC_STATIC || theclass == LOC_COMPUTED - || theclass == LOC_OPTIMIZED_OUT)); + && (loc_class == LOC_LOCAL || loc_class == LOC_REGISTER + || loc_class == LOC_STATIC || loc_class == LOC_COMPUTED + || loc_class == LOC_OPTIMIZED_OUT)); } /* (symbol-needs-frame? <gdb:symbol>) -> boolean @@ -526,7 +520,7 @@ gdbscm_symbol_value (SCM self, SCM rest) if (!gdbscm_is_false (frame_scm)) f_smob = frscm_get_frame_smob_arg_unsafe (frame_scm, frame_pos, FUNC_NAME); - if (symbol->aclass () == LOC_TYPEDEF) + if (symbol->loc_class () == LOC_TYPEDEF) { gdbscm_out_of_range_error (FUNC_NAME, SCM_ARG1, self, _("cannot get the value of a typedef")); diff --git a/gdb/guile/scm-type.c b/gdb/guile/scm-type.c index 5114579..13676ce 100644 --- a/gdb/guile/scm-type.c +++ b/gdb/guile/scm-type.c @@ -510,7 +510,7 @@ tyscm_field_smob_to_field (field_smob *f_smob) struct type *type = tyscm_field_smob_containing_type (f_smob); /* This should be non-NULL by construction. */ - gdb_assert (type->fields () != NULL); + gdb_assert (type->fields ().data () != nullptr); return &type->field (f_smob->field_num); } diff --git a/gdb/h8300-tdep.c b/gdb/h8300-tdep.c index db54438..15b0002 100644 --- a/gdb/h8300-tdep.c +++ b/gdb/h8300-tdep.c @@ -1374,9 +1374,7 @@ h8300_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) } -void _initialize_h8300_tdep (); -void -_initialize_h8300_tdep () +INIT_GDB_FILE (h8300_tdep) { gdbarch_register (bfd_arch_h8300, h8300_gdbarch_init); } diff --git a/gdb/hppa-bsd-tdep.c b/gdb/hppa-bsd-tdep.c index db6c92f..715e794 100644 --- a/gdb/hppa-bsd-tdep.c +++ b/gdb/hppa-bsd-tdep.c @@ -128,8 +128,7 @@ hppabsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_skip_trampoline_code (gdbarch, hppa_skip_trampoline_code); /* OpenBSD and NetBSD use SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); /* Hook in the DWARF CFI frame unwinder. */ dwarf2_frame_set_init_reg (gdbarch, hppabsd_dwarf2_frame_init_reg); diff --git a/gdb/hppa-linux-nat.c b/gdb/hppa-linux-nat.c index 62b3294..5e63e7f 100644 --- a/gdb/hppa-linux-nat.c +++ b/gdb/hppa-linux-nat.c @@ -383,9 +383,7 @@ fill_fpregset (const struct regcache *regcache, } } -void _initialize_hppa_linux_nat (); -void -_initialize_hppa_linux_nat () +INIT_GDB_FILE (hppa_linux_nat) { /* Register the target. */ linux_target = &the_hppa_linux_nat_target; diff --git a/gdb/hppa-linux-tdep.c b/gdb/hppa-linux-tdep.c index 16cdd45..2eb8d46 100644 --- a/gdb/hppa-linux-tdep.c +++ b/gdb/hppa-linux-tdep.c @@ -32,6 +32,7 @@ #include "regcache.h" #include "hppa-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "elf/common.h" /* Map DWARF DBX register numbers to GDB register numbers. */ @@ -499,8 +500,7 @@ hppa_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) frame_unwind_append_unwinder (gdbarch, &hppa_linux_sigtramp_frame_unwind); /* GNU/Linux uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); tdep->in_solib_call_trampoline = hppa_in_solib_call_trampoline; set_gdbarch_skip_trampoline_code (gdbarch, hppa_skip_trampoline_code); @@ -524,9 +524,7 @@ hppa_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) svr4_fetch_objfile_link_map); } -void _initialize_hppa_linux_tdep (); -void -_initialize_hppa_linux_tdep () +INIT_GDB_FILE (hppa_linux_tdep) { gdbarch_register_osabi (bfd_arch_hppa, 0, GDB_OSABI_LINUX, hppa_linux_init_abi); diff --git a/gdb/hppa-netbsd-nat.c b/gdb/hppa-netbsd-nat.c index f57d650..1ebf205 100644 --- a/gdb/hppa-netbsd-nat.c +++ b/gdb/hppa-netbsd-nat.c @@ -229,9 +229,7 @@ hppa_nbsd_nat_target::store_registers (struct regcache *regcache, int regnum) } } -void _initialize_hppanbsd_nat (); -void -_initialize_hppanbsd_nat () +INIT_GDB_FILE (hppanbsd_nat) { add_inf_child_target (&the_hppa_nbsd_nat_target); } diff --git a/gdb/hppa-netbsd-tdep.c b/gdb/hppa-netbsd-tdep.c index e52e181..90d8eb8 100644 --- a/gdb/hppa-netbsd-tdep.c +++ b/gdb/hppa-netbsd-tdep.c @@ -210,9 +210,7 @@ hppanbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tramp_frame_prepend_unwinder (gdbarch, &hppanbsd_sigtramp_si4); } -void _initialize_hppanbsd_tdep (); -void -_initialize_hppanbsd_tdep () +INIT_GDB_FILE (hppanbsd_tdep) { gdbarch_register_osabi (bfd_arch_hppa, 0, GDB_OSABI_NETBSD, hppanbsd_init_abi); diff --git a/gdb/hppa-obsd-nat.c b/gdb/hppa-obsd-nat.c index d879835..322b6f9 100644 --- a/gdb/hppa-obsd-nat.c +++ b/gdb/hppa-obsd-nat.c @@ -250,9 +250,7 @@ hppa_obsd_nat_target::store_registers (struct regcache *regcache, int regnum) } } -void _initialize_hppaobsd_nat (); -void -_initialize_hppaobsd_nat () +INIT_GDB_FILE (hppaobsd_nat) { add_inf_child_target (&the_hppa_obsd_nat_target); } diff --git a/gdb/hppa-obsd-tdep.c b/gdb/hppa-obsd-tdep.c index d2144f9..a511fa8 100644 --- a/gdb/hppa-obsd-tdep.c +++ b/gdb/hppa-obsd-tdep.c @@ -166,9 +166,7 @@ hppaobsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) (gdbarch, hppaobsd_iterate_over_regset_sections); } -void _initialize_hppabsd_tdep (); -void -_initialize_hppabsd_tdep () +INIT_GDB_FILE (hppabsd_tdep) { gdbarch_register_osabi (bfd_arch_hppa, 0, GDB_OSABI_OPENBSD, hppaobsd_init_abi); diff --git a/gdb/hppa-tdep.c b/gdb/hppa-tdep.c index 3c9dde2..61e6cb2 100644 --- a/gdb/hppa-tdep.c +++ b/gdb/hppa-tdep.c @@ -3119,9 +3119,7 @@ hppa_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file) gdb_printf (file, "elf = %s\n", tdep->is_elf ? "yes" : "no"); } -void _initialize_hppa_tdep (); -void -_initialize_hppa_tdep () +INIT_GDB_FILE (hppa_tdep) { gdbarch_register (bfd_arch_hppa, hppa_gdbarch_init, hppa_dump_tdep); diff --git a/gdb/i386-bsd-nat.c b/gdb/i386-bsd-nat.c index ae9e090..c5eda86 100644 --- a/gdb/i386-bsd-nat.c +++ b/gdb/i386-bsd-nat.c @@ -237,9 +237,7 @@ i386bsd_store_inferior_registers (struct regcache *regcache, int regnum) } } -void _initialize_i386bsd_nat (); -void -_initialize_i386bsd_nat () +INIT_GDB_FILE (i386bsd_nat) { /* To support the recognition of signal handlers, i386-bsd-tdep.c hardcodes some constants. Inclusion of this file means that we diff --git a/gdb/i386-darwin-nat.c b/gdb/i386-darwin-nat.c index 08d3a71..09d6ba6 100644 --- a/gdb/i386-darwin-nat.c +++ b/gdb/i386-darwin-nat.c @@ -631,9 +631,7 @@ darwin_set_sstep (thread_t thread, int enable) } } -void _initialize_i386_darwin_nat (); -void -_initialize_i386_darwin_nat () +INIT_GDB_FILE (i386_darwin_nat) { #ifdef BFD64 amd64_native_gregset64_reg_offset = amd64_darwin_thread_state_reg_offset; diff --git a/gdb/i386-darwin-tdep.c b/gdb/i386-darwin-tdep.c index 6180e02..a91afa2 100644 --- a/gdb/i386-darwin-tdep.c +++ b/gdb/i386-darwin-tdep.c @@ -271,7 +271,7 @@ i386_darwin_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) alignment. */ set_gdbarch_long_double_bit (gdbarch, 128); - set_gdbarch_so_ops (gdbarch, &darwin_so_ops); + set_gdbarch_make_solib_ops (gdbarch, make_darwin_solib_ops); } static enum gdb_osabi @@ -286,9 +286,7 @@ i386_mach_o_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_i386_darwin_tdep (); -void -_initialize_i386_darwin_tdep () +INIT_GDB_FILE (i386_darwin_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_unknown, bfd_target_mach_o_flavour, i386_mach_o_osabi_sniffer); diff --git a/gdb/i386-dicos-tdep.c b/gdb/i386-dicos-tdep.c index d3f19e2..50570c9 100644 --- a/gdb/i386-dicos-tdep.c +++ b/gdb/i386-dicos-tdep.c @@ -40,9 +40,7 @@ i386_dicos_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_i386_dicos_tdep (); -void -_initialize_i386_dicos_tdep () +INIT_GDB_FILE (i386_dicos_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_elf_flavour, i386_dicos_osabi_sniffer); diff --git a/gdb/i386-fbsd-nat.c b/gdb/i386-fbsd-nat.c index 77f0edd..f4088a3 100644 --- a/gdb/i386-fbsd-nat.c +++ b/gdb/i386-fbsd-nat.c @@ -330,9 +330,7 @@ i386_fbsd_nat_target::read_description () return i386_target_description (X86_XSTATE_X87_MASK, true); } -void _initialize_i386fbsd_nat (); -void -_initialize_i386fbsd_nat () +INIT_GDB_FILE (i386fbsd_nat) { add_inf_child_target (&the_i386_fbsd_nat_target); diff --git a/gdb/i386-fbsd-tdep.c b/gdb/i386-fbsd-tdep.c index 72237d8..827d53c 100644 --- a/gdb/i386-fbsd-tdep.c +++ b/gdb/i386-fbsd-tdep.c @@ -402,8 +402,7 @@ i386fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) i386fbsd_core_read_description); /* FreeBSD uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); set_gdbarch_fetch_tls_load_module_address (gdbarch, svr4_fetch_objfile_link_map); @@ -411,9 +410,7 @@ i386fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) i386fbsd_get_thread_local_address); } -void _initialize_i386fbsd_tdep (); -void -_initialize_i386fbsd_tdep () +INIT_GDB_FILE (i386fbsd_tdep) { gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_FREEBSD, i386fbsd_init_abi); diff --git a/gdb/i386-gnu-tdep.c b/gdb/i386-gnu-tdep.c index 97fbc69..f944fa5 100644 --- a/gdb/i386-gnu-tdep.c +++ b/gdb/i386-gnu-tdep.c @@ -180,8 +180,7 @@ i386gnu_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Hurd uses SVR4-style shared libraries. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); /* Hurd uses the dynamic linker included in the GNU C Library. */ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); @@ -202,9 +201,7 @@ i386gnu_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->sc_num_regs = ARRAY_SIZE (i386_gnu_sc_reg_offset); } -void _initialize_i386gnu_tdep (); -void -_initialize_i386gnu_tdep () +INIT_GDB_FILE (i386gnu_tdep) { gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_HURD, i386gnu_init_abi); } diff --git a/gdb/i386-go32-tdep.c b/gdb/i386-go32-tdep.c index 4db09b3..e6a1721 100644 --- a/gdb/i386-go32-tdep.c +++ b/gdb/i386-go32-tdep.c @@ -61,9 +61,7 @@ i386_coff_osabi_sniffer (bfd *abfd) } -void _initialize_i386_go32_tdep (); -void -_initialize_i386_go32_tdep () +INIT_GDB_FILE (i386_go32_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_coff_flavour, i386_coff_osabi_sniffer); diff --git a/gdb/i386-linux-nat.c b/gdb/i386-linux-nat.c index a5d5582..f5112d2 100644 --- a/gdb/i386-linux-nat.c +++ b/gdb/i386-linux-nat.c @@ -696,9 +696,7 @@ i386_linux_nat_target::low_resume (ptid_t ptid, int step, enum gdb_signal signal perror_with_name (("ptrace")); } -void _initialize_i386_linux_nat (); -void -_initialize_i386_linux_nat () +INIT_GDB_FILE (i386_linux_nat) { linux_target = &the_i386_linux_nat_target; diff --git a/gdb/i386-linux-tdep.c b/gdb/i386-linux-tdep.c index 4b05cc6..efbde6a 100644 --- a/gdb/i386-linux-tdep.c +++ b/gdb/i386-linux-tdep.c @@ -30,6 +30,7 @@ #include "i386-tdep.h" #include "i386-linux-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "utils.h" #include "glibc-tdep.h" #include "solib-svr4.h" @@ -1461,8 +1462,7 @@ i386_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* GNU/Linux uses SVR4-style shared libraries. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); /* GNU/Linux uses the dynamic linker included in the GNU C Library. */ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); @@ -1490,9 +1490,7 @@ i386_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) i386_linux_get_syscall_number); } -void _initialize_i386_linux_tdep (); -void -_initialize_i386_linux_tdep () +INIT_GDB_FILE (i386_linux_tdep) { gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_LINUX, i386_linux_init_abi); diff --git a/gdb/i386-netbsd-nat.c b/gdb/i386-netbsd-nat.c index 0f39fe1..efbf361 100644 --- a/gdb/i386-netbsd-nat.c +++ b/gdb/i386-netbsd-nat.c @@ -72,9 +72,7 @@ i386nbsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) static i386_bsd_nat_target<nbsd_nat_target> the_i386_nbsd_nat_target; -void _initialize_i386nbsd_nat (); -void -_initialize_i386nbsd_nat () +INIT_GDB_FILE (i386nbsd_nat) { add_inf_child_target (&the_i386_nbsd_nat_target); diff --git a/gdb/i386-netbsd-tdep.c b/gdb/i386-netbsd-tdep.c index 701ce04..a1124d0 100644 --- a/gdb/i386-netbsd-tdep.c +++ b/gdb/i386-netbsd-tdep.c @@ -415,16 +415,13 @@ i386nbsdelf_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) i386_elf_init_abi (info, gdbarch); /* NetBSD ELF uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); /* NetBSD ELF uses -fpcc-struct-return by default. */ tdep->struct_return = pcc_struct_return; } -void _initialize_i386nbsd_tdep (); -void -_initialize_i386nbsd_tdep () +INIT_GDB_FILE (i386nbsd_tdep) { gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_NETBSD, i386nbsdelf_init_abi); diff --git a/gdb/i386-obsd-nat.c b/gdb/i386-obsd-nat.c index 323acdb..f478e73 100644 --- a/gdb/i386-obsd-nat.c +++ b/gdb/i386-obsd-nat.c @@ -89,9 +89,7 @@ i386obsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) static i386_bsd_nat_target<obsd_nat_target> the_i386_obsd_nat_target; -void _initialize_i386obsd_nat (); -void -_initialize_i386obsd_nat () +INIT_GDB_FILE (i386obsd_nat) { add_inf_child_target (&i386_obsd_nat_target); diff --git a/gdb/i386-obsd-tdep.c b/gdb/i386-obsd-tdep.c index be65668..1126597 100644 --- a/gdb/i386-obsd-tdep.c +++ b/gdb/i386-obsd-tdep.c @@ -441,13 +441,10 @@ i386obsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) frame_unwind_prepend_unwinder (gdbarch, &i386obsd_trapframe_unwind); /* OpenBSD ELF uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); } -void _initialize_i386obsd_tdep (); -void -_initialize_i386obsd_tdep () +INIT_GDB_FILE (i386obsd_tdep) { gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_OPENBSD, i386obsd_init_abi); diff --git a/gdb/i386-sol2-nat.c b/gdb/i386-sol2-nat.c index d0fb836..1e87007 100644 --- a/gdb/i386-sol2-nat.c +++ b/gdb/i386-sol2-nat.c @@ -252,9 +252,7 @@ fill_fpregset (const struct regcache *regcache, #endif -void _initialize_amd64_sol2_nat (); -void -_initialize_amd64_sol2_nat () +INIT_GDB_FILE (amd64_sol2_nat) { #if PR_MODEL_NATIVE == PR_MODEL_LP64 amd64_native_gregset32_reg_offset = amd64_sol2_gregset32_reg_offset; diff --git a/gdb/i386-sol2-tdep.c b/gdb/i386-sol2-tdep.c index e842236..4ff08d2 100644 --- a/gdb/i386-sol2-tdep.c +++ b/gdb/i386-sol2-tdep.c @@ -86,8 +86,7 @@ i386_sol2_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->sc_num_regs = tdep->gregset_num_regs; /* Solaris has SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); } @@ -102,9 +101,7 @@ i386_sol2_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_i386_sol2_tdep (); -void -_initialize_i386_sol2_tdep () +INIT_GDB_FILE (i386_sol2_tdep) { /* Register an ELF OS ABI sniffer for Solaris 2 binaries. */ gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_elf_flavour, diff --git a/gdb/i386-tdep.c b/gdb/i386-tdep.c index 23788b4..21a5a28 100644 --- a/gdb/i386-tdep.c +++ b/gdb/i386-tdep.c @@ -60,9 +60,7 @@ #include "stap-probe.h" #include "user-regs.h" -#include "cli/cli-utils.h" #include "expression.h" -#include "parser-defs.h" #include <ctype.h> #include <algorithm> #include <unordered_set> @@ -4800,7 +4798,7 @@ static int i386_record_floats (struct gdbarch *gdbarch, static int i386_record_vex (struct i386_record_s *ir, uint8_t vex_w, uint8_t vex_r, - int opcode, struct gdbarch *gdbarch) + struct gdbarch *gdbarch) { /* We need this to find YMM (and once AVX-512 is supported, ZMM) registers. We should always save the largest available register, since an @@ -4814,6 +4812,11 @@ i386_record_vex (struct i386_record_s *ir, uint8_t vex_w, uint8_t vex_r, SCOPE_EXIT { inferior_thread ()->set_executing (true); }; inferior_thread () -> set_executing (false); + uint8_t opcode; + if (record_read_memory (gdbarch, ir->addr, &opcode, 1)) + return -1; + ir->addr++; + switch (opcode) { case 0x10: /* VMOVS[S|D] XMM, mem. */ @@ -4854,12 +4857,6 @@ i386_record_vex (struct i386_record_s *ir, uint8_t vex_w, uint8_t vex_r, i386_record_lea_modrm (ir); } break; - case 0x14: /* VUNPCKL[PS|PD]. */ - case 0x15: /* VUNPCKH [PS|PD]. */ - i386_record_modrm (ir); - record_full_arch_list_add_reg (ir->regcache, - tdep->ymm0_regnum + ir->reg + vex_r * 8); - break; case 0x6e: /* VMOVD XMM, reg/mem */ /* This is moving from a regular register or memory region into an XMM register. */ @@ -4915,6 +4912,16 @@ i386_record_vex (struct i386_record_s *ir, uint8_t vex_w, uint8_t vex_r, return -1; } break; + case 0xd0: /* VADDSUBPD XMM1, XMM2, reg/mem */ + /* VADDSUBPS XMM1, XMM2, reg/mem */ + i386_record_modrm (ir); + /* The most significant bit of the register offset + is vex_r. */ + record_full_arch_list_add_reg (ir->regcache, + tdep->ymm0_regnum + + ir->reg + vex_r * 8); + break; + case 0xd6: /* VMOVQ reg/mem XMM */ i386_record_modrm (ir); /* This is the vmovq version that stores into a regular register @@ -4979,6 +4986,27 @@ i386_record_vex (struct i386_record_s *ir, uint8_t vex_w, uint8_t vex_r, } break; + case 0x19: /* VBROADCASTSD and VEXTRACTF128. */ + case 0x39: /* VEXTRACTI128. */ + i386_record_modrm (ir); + /* vextract instructions use ModRM.R/M and VEX.B to address the + output register, while vbroadcast use ModRM.Reg and VEX.R. + They are differentiated through map_select. */ + if (ir->map_select == 2) + record_full_arch_list_add_reg (ir->regcache, + tdep->ymm0_regnum + ir->reg + + 8 * vex_r); + else + record_full_arch_list_add_reg (ir->regcache, + tdep->ymm0_regnum + ir->rm + + 8 * ir->rex_b); + break; + + case 0x18: /* VBROADCASTSS and VINSERTI128. */ + case 0x20: /* VPINSRB. */ + case 0x21: /* VINSERTPS. */ + case 0x22: /* VINSR[D|Q]. */ + case 0x38: /* VINSERTF128. */ case 0x60: /* VPUNPCKLBW */ case 0x61: /* VPUNPCKLWD */ case 0x62: /* VPUNPCKLDQ */ @@ -4987,6 +5015,7 @@ i386_record_vex (struct i386_record_s *ir, uint8_t vex_w, uint8_t vex_r, case 0x69: /* VPUNPCKHWD */ case 0x6a: /* VPUNPCKHDQ */ case 0x6d: /* VPUNPCKHQDQ */ + case 0xc4: /* VPINSRW. */ { i386_record_modrm (ir); int reg_offset = ir->reg + vex_r * 8; @@ -4995,6 +5024,61 @@ i386_record_vex (struct i386_record_s *ir, uint8_t vex_w, uint8_t vex_r, } break; + case 0x14: /* VPEXTRB and VUNPCKL[PS|PD]. */ + case 0x15: /* VPEXTRW (to memory) and VUNPCKH [PS|PD]. */ + case 0x16: /* VPEXTR[D|Q], VPERMPS, VMOVLHPS and VMOVHP[S|D] to reg. */ + { + i386_record_modrm (ir); + /* All vpextr instructions in this case use map_select == 3, + while vpermps has map_select == 2 and the other instructions + have map_select == 1. The opcode 0xc5 is for vpextr, but also + uses map_select == 1, but due to other inconsistencies with + the other vpextr instructions, it is in a separate case to + avoid making this even more of a mess. */ + if (ir->map_select == 3) + { + if (ir->mod == 3) + { + /* ModRM.Mod being equal to 3 means this ModRM encodes + a register. */ + record_full_arch_list_add_reg (ir->regcache, + ir->regmap[X86_RECORD_REAX_REGNUM + + ir->rm]); + } + else + { + /* Even though the test only generated ModRM.Mod == 0, + in theory all values != 3 are viable to encode a memory + address, so all of them are passed along. */ + /* Size is mostly based on the opcode, except for + double/quadword difference. */ + ir->ot = opcode - 0x14; + if (opcode == 0x16 && vex_w == 1) + ir->ot ++; + /* I'm not sure if this is the original use, but in here + rip_offset is used to indicate that the RIP pointer will + be 1 byte away from where the instruction expects it to + be, because the immediate will not have been read by the + time the address changed is calculated. */ + ir->rip_offset = 1; + i386_record_lea_modrm (ir); + } + } + else + { + record_full_arch_list_add_reg (ir->regcache, + tdep->ymm0_regnum + ir->reg + + vex_r * 8); + } + break; + } + case 0xc5: /* VPEXTRW to register. */ + i386_record_modrm (ir); + record_full_arch_list_add_reg (ir->regcache, + ir->regmap[X86_RECORD_REAX_REGNUM + + ir->reg]); + break; + case 0x74: /* VPCMPEQB */ case 0x75: /* VPCMPEQB */ case 0x76: /* VPCMPEQB */ @@ -5006,17 +5090,96 @@ i386_record_vex (struct i386_record_s *ir, uint8_t vex_w, uint8_t vex_r, } break; - case 0x78: /* VPBROADCASTB */ - case 0x79: /* VPBROADCASTW */ + case 0x71: /* VPS[LL|RA|RL]W with constant shift. */ + case 0x72: /* VPS[LL|RA|RL]D with constant shift. */ + case 0x73: /* VPS[LL|RL][Q|DQ] with constant shift. */ + { + record_full_arch_list_add_reg (ir->regcache, + tdep->ymm0_regnum + ir->vvvv); + break; + } + + case 0x2c: /* VCVTTSD2SI and VCVTTSS2SI. */ + case 0x2d: /* VCVTSD2SI and VCVTSS2SI. */ + i386_record_modrm (ir); + record_full_arch_list_add_reg (ir->regcache, + ir->regmap[X86_RECORD_REAX_REGNUM + + ir->reg]); + break; + + case 0x17: /* VEXTRACTPS and VMOVHP[S|D] to memory. */ + case 0x13: /* VMOVLPD to memory. */ + i386_record_modrm (ir); + if (ir->map_select == 1) /* This is the VMOV family. */ + { + ir->ot = 3; + i386_record_lea_modrm (ir); + } + else + record_full_arch_list_add_reg (ir->regcache, + ir->regmap[X86_RECORD_REAX_REGNUM + + ir->rm]); + break; + + case 0x00: /* VSHUFB and VPERMQ. */ + case 0x01: /* VPERMPD. */ + case 0x02: /* VPBLENDD. */ + case 0x04: /* VPERMILPS with immediate. */ + case 0x05: /* VPERMILPD with immediate. */ + case 0x06: /* VMPERM2F128. */ + case 0x0c: /* VPERMILPS with register and VBLENDPS. */ + case 0x0d: /* VPERMILPD with register and VBLENDPD. */ + case 0x0e: /* VPBLENDW. */ + case 0x12: /* VMOVDDUP, VMOVHLPS and VMOVLPD to register. */ + case 0x1a: /* VBROADCASTF128. */ + case 0x2a: /* VCVTSI2SS. */ + case 0x2b: /* VPACKUSDW. */ + case 0x36: /* VPERMD. */ + case 0x40: /* VPMULLD */ + case 0x46: /* VPERM2I128. */ + case 0x4a: /* VBLENDVPS. */ + case 0x4b: /* VBLENDVPD. */ + case 0x4c: /* VPBLENDVB. */ + case 0x57: /* VXORP[S|D] */ case 0x58: /* VPBROADCASTD and VADD[P|S][S|D] */ case 0x59: /* VPBROADCASTQ and VMUL[P|S][S|D] */ + case 0x5a: /* VCVTPS2PD, VCVTSD2SS, VCVTSS2SD and VCVTPD2PS. */ + case 0x5b: /* VCVTDQ2PS, VCVTTPS2PD and VCVTPS2DQ. */ case 0x5c: /* VSUB[P|S][S|D] */ case 0x5d: /* VMIN[P|S][S|D] */ case 0x5e: /* VDIV[P|S][S|D] */ case 0x5f: /* VMAX[P|S][S|D] */ + case 0x63: /* VPACKSSWB. */ + case 0X67: /* VPACKUSWB. */ + case 0x6b: /* VPACKSSDW. */ + case 0x70: /* VPSHUF[B|D|HW|LW]. */ + case 0x78: /* VPBROADCASTB */ + case 0x79: /* VPBROADCASTW */ + case 0xc6: /* VSHUFP[S|D]. */ + case 0xd1: /* VPSRLW, dynamic shift. */ + case 0xd2: /* VPSRLD, dynamic shift. */ + case 0xd3: /* VPSRLQ, dynamic shift. */ + case 0xd4: /* VPADDQ */ + case 0xd5: /* VPMULLW */ + case 0xdb: /* VPAND */ + case 0xdf: /* VPANDN */ + case 0xe1: /* VPSRAW, dynamic shift. */ + case 0xe2: /* VPSRAD, dynamic shift. */ + case 0xe4: /* VPMULHUW */ + case 0xe5: /* VPMULHW */ + case 0xe6: /* VCVTDQ2PD, VCVTTPD2DQ and VCVTPD2DQ. */ + case 0xf1: /* VPSLLW, dynamic shift. */ + case 0xf2: /* VPSLLD, dynamic shift. */ + case 0xf3: /* VPSLLQ, dynamic shift. */ + case 0xf4: /* VPMULUDQ */ + case 0xf6: /* VPSADBW. */ + case 0xfc: /* VPADDB */ + case 0xfd: /* VPADDW */ + case 0xfe: /* VPADDD */ { - /* vpbroadcast and arithmetic operations are differentiated - by map_select, but it doesn't change the recording mechanics. */ + /* This set of instructions all share the same exact way to encode + the destination register, so there's no reason to try and + differentiate them. */ i386_record_modrm (ir); int reg_offset = ir->reg + vex_r * 8; gdb_assert (tdep->num_ymm_regs > reg_offset); @@ -5025,6 +5188,17 @@ i386_record_vex (struct i386_record_s *ir, uint8_t vex_w, uint8_t vex_r, } break; + case 0x2e: /* VUCOMIS[S|D]. */ + case 0x2f: /* VCOMIS[S|D]. */ + { + /* Despite what the manual implies, saying that the first register + will be written to, actual testing shows that the only register + changed is EFLAGS. */ + record_full_arch_list_add_reg (ir->regcache, + ir->regmap[X86_RECORD_EFLAGS_REGNUM]); + break; + } + case 0x77:/* VZEROUPPER */ { int num_regs = tdep->num_ymm_regs; @@ -5117,8 +5291,11 @@ i386_process_record (struct gdbarch *gdbarch, struct regcache *regcache, "addr = %s\n", paddress (gdbarch, ir.addr)); - /* prefixes */ - while (1) + /* Process the prefixes. This used to be an infinite loop, but since + a VEX prefix is always the last one before the opcode, according to + Intel's manual anyway, and some AVX opcodes may conflict with + prefixes, it's safe to leave the loop as soon as we see VEX. */ + while (!vex_prefix) { if (record_read_memory (gdbarch, ir.addr, &opcode8, 1)) return -1; @@ -5258,7 +5435,7 @@ i386_process_record (struct gdbarch *gdbarch, struct regcache *regcache, { /* If we found the VEX prefix, i386 will either record or warn that the instruction isn't supported, so we can return the VEX result. */ - return i386_record_vex (&ir, rex_w, rex_r, opcode, gdbarch); + return i386_record_vex (&ir, rex_w, rex_r, gdbarch); } reswitch: switch (opcode) @@ -8800,41 +8977,12 @@ i386_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) tdep->num_core_regs = I386_NUM_GREGS + I387_NUM_REGS; tdep->register_names = i386_register_names; - /* No upper YMM registers. */ - tdep->ymmh_register_names = NULL; - tdep->ymm0h_regnum = -1; - - /* No upper ZMM registers. */ - tdep->zmmh_register_names = NULL; - tdep->zmm0h_regnum = -1; - - /* No high XMM registers. */ - tdep->xmm_avx512_register_names = NULL; - tdep->xmm16_regnum = -1; - - /* No upper YMM16-31 registers. */ - tdep->ymm16h_register_names = NULL; - tdep->ymm16h_regnum = -1; - tdep->num_byte_regs = 8; tdep->num_word_regs = 8; tdep->num_dword_regs = 0; tdep->num_mmx_regs = 8; tdep->num_ymm_regs = 0; - /* No AVX512 registers. */ - tdep->k0_regnum = -1; - tdep->num_zmm_regs = 0; - tdep->num_ymm_avx512_regs = 0; - tdep->num_xmm_avx512_regs = 0; - - /* No PKEYS registers */ - tdep->pkru_regnum = -1; - tdep->num_pkeys_regs = 0; - - /* No segment base registers. */ - tdep->fsbase_regnum = -1; - tdesc_arch_data_up tdesc_data = tdesc_data_alloc (); set_gdbarch_relocate_instruction (gdbarch, i386_relocate_instruction); @@ -8970,9 +9118,7 @@ i386_target_description (uint64_t xcr0, bool segments) return *tdesc; } -void _initialize_i386_tdep (); -void -_initialize_i386_tdep () +INIT_GDB_FILE (i386_tdep) { gdbarch_register (bfd_arch_i386, i386_gdbarch_init); diff --git a/gdb/i386-tdep.h b/gdb/i386-tdep.h index e849b33..e4895b1 100644 --- a/gdb/i386-tdep.h +++ b/gdb/i386-tdep.h @@ -69,56 +69,57 @@ struct i386_gdbarch_tdep : gdbarch_tdep_base size_t sizeof_fpregset = 0; /* Register number for %st(0). The register numbers for the other - registers follow from this one. Set this to -1 to indicate the - absence of an FPU. */ - int st0_regnum = 0; + registers follow from this one. Set this to a value >= 0 if FPU is + present. */ + int st0_regnum = -1; /* Number of MMX registers. */ int num_mmx_regs = 0; - /* Register number for %mm0. Set this to -1 to indicate the absence - of MMX support. */ - int mm0_regnum = 0; + /* Register number for %mm0. Set this to a value >= 0 if MMX is + supported. */ + int mm0_regnum = -1; /* Number of pseudo YMM registers. */ int num_ymm_regs = 0; - /* Register number for %ymm0. Set this to -1 to indicate the absence - of pseudo YMM register support. */ - int ymm0_regnum = 0; + /* Register number for %ymm0. Set this to a value >= 0 if pseudo YMM + registers are supported. */ + int ymm0_regnum = -1; /* Number of AVX512 OpMask registers (K-registers) */ int num_k_regs = 0; - /* Register number for %k0. Set this to -1 to indicate the absence - of AVX512 OpMask register support. */ - int k0_regnum = 0; + /* Register number for %k0. Set this to a value >= 0 if AVX512 OpMask + is supported. */ + int k0_regnum = -1; /* Number of pseudo ZMM registers ($zmm0-$zmm31). */ int num_zmm_regs = 0; - /* Register number for %zmm0. Set this to -1 to indicate the absence - of pseudo ZMM register support. */ - int zmm0_regnum = 0; + /* Register number for %zmm0. Set this to a value >= 0 if pseudo ZMM + registers are supported. */ + int zmm0_regnum = -1; /* Number of byte registers. */ int num_byte_regs = 0; - /* Register pseudo number for %al. */ - int al_regnum = 0; + /* Register pseudo number for %al. If supported, set this to a + value >= 0. */ + int al_regnum = -1; /* Number of pseudo word registers. */ int num_word_regs = 0; - /* Register number for %ax. */ - int ax_regnum = 0; + /* Register number for %ax. If supported, set this to a value >= 0. */ + int ax_regnum = -1; /* Number of pseudo dword registers. */ int num_dword_regs = 0; - /* Register number for %eax. Set this to -1 to indicate the absence - of pseudo dword register support. */ - int eax_regnum = 0; + /* Register number for %eax. Set this to a value >= 0 if pseudo dword + registers are supported. */ + int eax_regnum = -1; /* Number of core registers. */ int num_core_regs = 0; @@ -129,14 +130,16 @@ struct i386_gdbarch_tdep : gdbarch_tdep_base /* Number of SSE registers added in AVX512. */ int num_xmm_avx512_regs = 0; - /* Register number of XMM16, the first XMM register added in AVX512. */ - int xmm16_regnum = 0; + /* Register number of XMM16, the first XMM register added in AVX512. + Set this to a value >= 0 if XMM registers are supported. */ + int xmm16_regnum = -1; /* Number of YMM registers added in AVX512. */ int num_ymm_avx512_regs = 0; - /* Register number of YMM16, the first YMM register added in AVX512. */ - int ymm16_regnum = 0; + /* Register number of YMM16, the first YMM register added in AVX512. + Set this to a value >= 0 if YMM registers are supported. */ + int ymm16_regnum = -1; /* Bits of the extended control register 0 (the XFEATURE_ENABLED_MASK register), excluding the x87 bit, which are supported by this GDB. */ @@ -152,23 +155,23 @@ struct i386_gdbarch_tdep : gdbarch_tdep_base /* Register names. */ const char * const *register_names = nullptr; - /* Register number for %ymm0h. Set this to -1 to indicate the absence - of upper YMM register support. */ - int ymm0h_regnum = 0; + /* Register number for %ymm0h. Set this to a value >= 0 if they are + supported. */ + int ymm0h_regnum = -1; /* Upper YMM register names. Only used for tdesc_numbered_register. */ const char * const *ymmh_register_names = nullptr; - /* Register number for %ymm16h. Set this to -1 to indicate the absence - of support for YMM16-31. */ - int ymm16h_regnum = 0; + /* Register number for %ymm16h. Set this to a value >= 0 if they are + supported. */ + int ymm16h_regnum = -1; /* YMM16-31 register names. Only used for tdesc_numbered_register. */ const char * const *ymm16h_register_names = nullptr; - /* Register number for %zmm0h. Set this to -1 to indicate the absence - of ZMM_HI256 register support. */ - int zmm0h_regnum = 0; + /* Register number for %zmm0h. Set this to a value >= 0 if ZMM_HI256 + registers are supported. */ + int zmm0h_regnum = -1; /* OpMask register names. */ const char * const *k_register_names = nullptr; @@ -185,15 +188,16 @@ struct i386_gdbarch_tdep : gdbarch_tdep_base /* Number of PKEYS registers. */ int num_pkeys_regs = 0; - /* Register number for PKRU register. */ - int pkru_regnum = 0; + /* Register number for PKRU register. If supported, set this to a value + >= 0. */ + int pkru_regnum = -1; /* PKEYS register names. */ const char * const *pkeys_register_names = nullptr; - /* Register number for %fsbase. Set this to -1 to indicate the - absence of segment base registers. */ - int fsbase_regnum = 0; + /* Register number for %fsbase. If supported, set this to a value + >= 0. */ + int fsbase_regnum = -1; /* Target description. */ const struct target_desc *tdesc = nullptr; diff --git a/gdb/i386-windows-nat.c b/gdb/i386-windows-nat.c index 6c1369a..f878727 100644 --- a/gdb/i386-windows-nat.c +++ b/gdb/i386-windows-nat.c @@ -82,9 +82,7 @@ i386_windows_segment_register_p (int regnum) return regnum >= I386_CS_REGNUM && regnum <= I386_GS_REGNUM; } -void _initialize_i386_windows_nat (); -void -_initialize_i386_windows_nat () +INIT_GDB_FILE (i386_windows_nat) { #ifndef __x86_64__ x86_set_debug_register_length (4); diff --git a/gdb/i386-windows-tdep.c b/gdb/i386-windows-tdep.c index 43ae5e4..892ecd4 100644 --- a/gdb/i386-windows-tdep.c +++ b/gdb/i386-windows-tdep.c @@ -229,9 +229,7 @@ i386_cygwin_core_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } -void _initialize_i386_windows_tdep (); -void -_initialize_i386_windows_tdep () +INIT_GDB_FILE (i386_windows_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_coff_flavour, i386_windows_osabi_sniffer); diff --git a/gdb/ia64-libunwind-tdep.c b/gdb/ia64-libunwind-tdep.c index 3ba9cb6..6d3b265 100644 --- a/gdb/ia64-libunwind-tdep.c +++ b/gdb/ia64-libunwind-tdep.c @@ -574,9 +574,7 @@ libunwind_is_initialized (void) return libunwind_initialized; } -void _initialize_libunwind_frame (); -void -_initialize_libunwind_frame () +INIT_GDB_FILE (libunwind_frame) { libunwind_initialized = libunwind_load (); } diff --git a/gdb/ia64-linux-nat.c b/gdb/ia64-linux-nat.c index 964b175..e833f9d 100644 --- a/gdb/ia64-linux-nat.c +++ b/gdb/ia64-linux-nat.c @@ -914,9 +914,7 @@ ia64_linux_nat_target::low_status_is_event (int status) || WSTOPSIG (status) == SIGILL); } -void _initialize_ia64_linux_nat (); -void -_initialize_ia64_linux_nat () +INIT_GDB_FILE (ia64_linux_nat) { /* Register the target. */ linux_target = &the_ia64_linux_nat_target; diff --git a/gdb/ia64-linux-tdep.c b/gdb/ia64-linux-tdep.c index c45b2bb..6afffee 100644 --- a/gdb/ia64-linux-tdep.c +++ b/gdb/ia64-linux-tdep.c @@ -26,6 +26,7 @@ #include "solib-svr4.h" #include "symtab.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "regset.h" #include <ctype.h> @@ -235,8 +236,7 @@ ia64_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_lp64_svr4_solib_ops); /* Enable TLS support. */ set_gdbarch_fetch_tls_load_module_address (gdbarch, @@ -257,9 +257,7 @@ ia64_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) ia64_linux_stap_is_single_operand); } -void _initialize_ia64_linux_tdep (); -void -_initialize_ia64_linux_tdep () +INIT_GDB_FILE (ia64_linux_tdep) { gdbarch_register_osabi (bfd_arch_ia64, 0, GDB_OSABI_LINUX, ia64_linux_init_abi); diff --git a/gdb/ia64-tdep.c b/gdb/ia64-tdep.c index 395b5f7..7c6526a 100644 --- a/gdb/ia64-tdep.c +++ b/gdb/ia64-tdep.c @@ -4014,9 +4014,7 @@ ia64_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_ia64_tdep (); -void -_initialize_ia64_tdep () +INIT_GDB_FILE (ia64_tdep) { gdbarch_register (bfd_arch_ia64, ia64_gdbarch_init, NULL); } diff --git a/gdb/ia64-vms-tdep.c b/gdb/ia64-vms-tdep.c index dcd5598..32fe5d4 100644 --- a/gdb/ia64-vms-tdep.c +++ b/gdb/ia64-vms-tdep.c @@ -153,9 +153,7 @@ ia64_openvms_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) #endif } -void _initialize_ia64_vms_tdep (); -void -_initialize_ia64_vms_tdep () +INIT_GDB_FILE (ia64_vms_tdep) { gdbarch_register_osabi (bfd_arch_ia64, 0, GDB_OSABI_OPENVMS, ia64_openvms_init_abi); diff --git a/gdb/inf-child.c b/gdb/inf-child.c index 016f30a..57ad0b4 100644 --- a/gdb/inf-child.c +++ b/gdb/inf-child.c @@ -322,11 +322,11 @@ inf_child_target::fileio_fstat (int fd, struct stat *sb, fileio_error *target_er return ret; } -/* Implementation of to_fileio_stat. */ +/* Implementation of to_fileio_lstat. */ int -inf_child_target::fileio_stat (struct inferior *inf, const char *filename, - struct stat *sb, fileio_error *target_errno) +inf_child_target::fileio_lstat (struct inferior *inf, const char *filename, + struct stat *sb, fileio_error *target_errno) { int ret; diff --git a/gdb/inf-child.h b/gdb/inf-child.h index 79b5157..70de393 100644 --- a/gdb/inf-child.h +++ b/gdb/inf-child.h @@ -81,8 +81,8 @@ public: int fileio_pread (int fd, gdb_byte *read_buf, int len, ULONGEST offset, fileio_error *target_errno) override; int fileio_fstat (int fd, struct stat *sb, fileio_error *target_errno) override; - int fileio_stat (struct inferior *inf, const char *filename, - struct stat *sb, fileio_error *target_errno) override; + int fileio_lstat (struct inferior *inf, const char *filename, + struct stat *sb, fileio_error *target_errno) override; int fileio_close (int fd, fileio_error *target_errno) override; int fileio_unlink (struct inferior *inf, const char *filename, diff --git a/gdb/infcall.c b/gdb/infcall.c index 098072d..2b5936d 100644 --- a/gdb/infcall.c +++ b/gdb/infcall.c @@ -1870,9 +1870,7 @@ When the function is done executing, GDB will silently stop."), gdb_assert_not_reached ("... should not be here"); } -void _initialize_infcall (); -void -_initialize_infcall () +INIT_GDB_FILE (infcall) { add_setshow_boolean_cmd ("may-call-functions", no_class, &may_call_functions_p, _("\ diff --git a/gdb/infcmd.c b/gdb/infcmd.c index e9b58ce..89f9205 100644 --- a/gdb/infcmd.c +++ b/gdb/infcmd.c @@ -25,6 +25,7 @@ #include "inferior.h" #include "infrun.h" #include "gdbsupport/environ.h" +#include "gdbsupport/common-inferior.h" #include "value.h" #include "cli/cli-cmds.h" #include "cli/cli-style.h" @@ -224,14 +225,11 @@ strip_bg_char (const char *args, int *bg_char_p) return make_unique_xstrdup (args); } -/* Common actions to take after creating any sort of inferior, by any - means (running, attaching, connecting, et cetera). The target - should be stopped. */ +/* See inferior.h. */ void -post_create_inferior (int from_tty) +post_create_inferior (int from_tty, bool set_pspace_solib_ops) { - /* Be sure we own the terminal in case write operations are performed. */ target_terminal::ours_for_output (); @@ -261,6 +259,10 @@ post_create_inferior (int from_tty) throw; } + if (set_pspace_solib_ops) + current_program_space->set_solib_ops + (gdbarch_make_solib_ops (current_inferior ()->arch ())); + if (current_program_space->exec_bfd ()) { const unsigned solib_add_generation @@ -482,7 +484,7 @@ run_command_1 (const char *args, int from_tty, enum run_how run_how) /* Pass zero for FROM_TTY, because at this point the "run" command has done its thing; now we are setting up the running program. */ - post_create_inferior (0); + post_create_inferior (0, true); /* Queue a pending event so that the program stops immediately. */ if (run_how == RUN_STOP_AT_FIRST_INSN) @@ -988,7 +990,7 @@ prepare_one_step (thread_info *tp, struct step_command_fsm *sm) if (inline_skipped_frames (tp) > 0) { const symbol *sym = inline_skipped_symbol (tp); - if (sym->aclass () == LOC_BLOCK) + if (sym->loc_class () == LOC_BLOCK) { const block *block = sym->value_block (); if (block->end () < tp->control.step_range_end) @@ -2506,7 +2508,7 @@ setup_inferior (int from_tty) /* Take any necessary post-attaching actions for this platform. */ target_post_attach (inferior_ptid.pid ()); - post_create_inferior (from_tty); + post_create_inferior (from_tty, true); } /* What to do after the first program stops after attaching. */ @@ -3080,9 +3082,7 @@ use \"set args\" without arguments.\n\ \n\ To start the inferior without using a shell, use \"set startup-with-shell off\"." -void _initialize_infcmd (); -void -_initialize_infcmd () +INIT_GDB_FILE (infcmd) { static struct cmd_list_element *info_proc_cmdlist; struct cmd_list_element *c = nullptr; diff --git a/gdb/inferior.c b/gdb/inferior.c index e8a28cd..eb895f2 100644 --- a/gdb/inferior.c +++ b/gdb/inferior.c @@ -19,6 +19,7 @@ #include "exec.h" #include "inferior.h" +#include "gdbsupport/common-inferior.h" #include "target.h" #include "command.h" #include "completer.h" diff --git a/gdb/inferior.h b/gdb/inferior.h index 54f5229..8455b79 100644 --- a/gdb/inferior.h +++ b/gdb/inferior.h @@ -54,10 +54,8 @@ struct thread_info; #include "symfile-add-flags.h" #include "gdbsupport/refcounted-object.h" #include "gdbsupport/forward-scope-exit.h" -#include "gdbsupport/gdb_unique_ptr.h" #include "gdbsupport/intrusive_list.h" -#include "gdbsupport/common-inferior.h" #include "gdbthread.h" #include "process-stratum-target.h" @@ -213,7 +211,14 @@ extern ptid_t gdb_startup_inferior (pid_t pid, int num_traps); extern void setup_inferior (int from_tty); -extern void post_create_inferior (int from_tty); +/* Common actions to take after creating any sort of inferior, by any + means (running, attaching, connecting, et cetera). The target + should be stopped. + + If SET_PSPACE_SOLIB_OPS is true, initialize the program space's solib + provider using the current inferior's architecture. */ + +extern void post_create_inferior (int from_tty, bool set_pspace_solib_ops); extern void attach_command (const char *, int); diff --git a/gdb/inflow.c b/gdb/inflow.c index f5ae6cd..4f1c8ef 100644 --- a/gdb/inflow.c +++ b/gdb/inflow.c @@ -55,6 +55,20 @@ static void child_terminal_ours_1 (target_terminal_state); static struct serial *stdin_serial; +/* See terminal.h. */ + +scoped_gdb_ttystate::scoped_gdb_ttystate () +{ + m_ttystate = serial_get_tty_state (stdin_serial); +} + +/* See terminal.h. */ + +scoped_gdb_ttystate::~scoped_gdb_ttystate () +{ + serial_set_tty_state (stdin_serial, m_ttystate); +} + /* Terminal related info we need to keep track of. Each inferior holds an instance of this structure --- we save it whenever the corresponding inferior stops, and restore it to the terminal when @@ -163,6 +177,15 @@ set_initial_gdb_ttystate (void) } } +/* See terminal.h. */ + +void +restore_initial_gdb_ttystate () +{ + if (initial_gdb_ttystate != nullptr) + serial_set_tty_state (stdin_serial, initial_gdb_ttystate); +} + /* Does GDB have a terminal (on stdin)? */ static int @@ -944,9 +967,7 @@ initialize_stdin_serial (void) stdin_serial = serial_fdopen (0); } -void _initialize_inflow (); -void -_initialize_inflow () +INIT_GDB_FILE (inflow) { add_info ("terminal", info_terminal_command, _("Print inferior's saved terminal status.")); diff --git a/gdb/infrun.c b/gdb/infrun.c index 0b87287..051236e 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -58,7 +58,6 @@ #include "target-descriptions.h" #include "target-dcache.h" #include "terminal.h" -#include "solist.h" #include "gdbsupport/event-loop.h" #include "thread-fsm.h" #include "gdbsupport/enum-flags.h" @@ -68,7 +67,6 @@ #include "gdbsupport/scope-exit.h" #include "gdbsupport/forward-scope-exit.h" #include "gdbsupport/gdb_select.h" -#include <unordered_map> #include "async-event.h" #include "gdbsupport/selftest.h" #include "scoped-mock-context.h" @@ -473,6 +471,7 @@ holding the child stopped. Try \"set %ps\" or \"%ps\".\n"), inferior *parent_inf = current_inferior (); inferior *child_inf = nullptr; + bool child_has_new_pspace = false; gdb_assert (parent_inf->thread_waiting_for_vfork_done == nullptr); @@ -537,6 +536,7 @@ holding the child stopped. Try \"set %ps\" or \"%ps\".\n"), else { child_inf->pspace = new program_space (new_address_space ()); + child_has_new_pspace = true; child_inf->aspace = child_inf->pspace->aspace; child_inf->removable = true; clone_program_space (child_inf->pspace, parent_inf->pspace); @@ -626,6 +626,7 @@ holding the child stopped. Try \"set %ps\" or \"%ps\".\n"), else { child_inf->pspace = new program_space (new_address_space ()); + child_has_new_pspace = true; child_inf->aspace = child_inf->pspace->aspace; child_inf->removable = true; child_inf->symfile_flags = SYMFILE_NO_READ; @@ -724,7 +725,8 @@ holding the child stopped. Try \"set %ps\" or \"%ps\".\n"), maybe_restore.emplace (); switch_to_thread (*child_inf->threads ().begin ()); - post_create_inferior (0); + + post_create_inferior (0, child_has_new_pspace); } return false; @@ -1322,6 +1324,7 @@ follow_exec (ptid_t ptid, const char *exec_file_target) we don't want those to be satisfied by the libraries of the previous incarnation of this process. */ no_shared_libraries (current_program_space); + current_program_space->unset_solib_ops (); inferior *execing_inferior = current_inferior (); inferior *following_inferior; @@ -1378,6 +1381,8 @@ follow_exec (ptid_t ptid, const char *exec_file_target) registers. */ target_find_description (); + current_program_space->set_solib_ops + (gdbarch_make_solib_ops (following_inferior->arch ())); gdb::observers::inferior_execd.notify (execing_inferior, following_inferior); breakpoint_re_set (); @@ -2365,7 +2370,7 @@ maybe_software_singlestep (struct gdbarch *gdbarch) bool hw_step = true; if (execution_direction == EXEC_FORWARD - && gdbarch_software_single_step_p (gdbarch)) + && gdbarch_get_next_pcs_p (gdbarch)) hw_step = !insert_single_step_breakpoints (gdbarch); return hw_step; @@ -3819,7 +3824,7 @@ start_remote (int from_tty) /* Now that the inferior has stopped, do any bookkeeping like loading shared libraries. We want to do this before normal_stop, so that the displayed frame is up to date. */ - post_create_inferior (from_tty); + post_create_inferior (from_tty, true); normal_stop (); } @@ -10532,9 +10537,7 @@ infrun_thread_ptid_changed () #endif /* GDB_SELF_TEST */ -void _initialize_infrun (); -void -_initialize_infrun () +INIT_GDB_FILE (infrun) { struct cmd_list_element *c; diff --git a/gdb/inline-frame.c b/gdb/inline-frame.c index d724c28..2191282 100644 --- a/gdb/inline-frame.c +++ b/gdb/inline-frame.c @@ -615,9 +615,7 @@ maintenance_info_inline_frames (const char *arg, int from_tty) -void _initialize_inline_frame (); -void -_initialize_inline_frame () +INIT_GDB_FILE (inline_frame) { add_cmd ("inline-frames", class_maintenance, maintenance_info_inline_frames, _("\ diff --git a/gdb/interps.c b/gdb/interps.c index 00796bc..b4de3c7 100644 --- a/gdb/interps.c +++ b/gdb/interps.c @@ -575,9 +575,7 @@ interps_notify_memory_changed (inferior *inf, CORE_ADDR addr, ssize_t len, } /* This just adds the "interpreter-exec" command. */ -void _initialize_interpreter (); -void -_initialize_interpreter () +INIT_GDB_FILE (interpreter) { struct cmd_list_element *c; diff --git a/gdb/interps.h b/gdb/interps.h index 8d35309..c74495b 100644 --- a/gdb/interps.h +++ b/gdb/interps.h @@ -23,6 +23,7 @@ #define GDB_INTERPS_H #include "gdbsupport/intrusive_list.h" +#include "gdbsupport/event-loop.h" struct bpstat; struct ui_out; @@ -78,6 +79,13 @@ public: virtual void pre_command_loop () {} + /* Service one event. + This gives the interpreter a chance to handle its own private + events that cannot be fed into the gdb event mechanism. + In all cases, this should call gdb_do_one_event at some point. */ + virtual int do_one_event (int mstimeout = -1) + { return gdb_do_one_event (mstimeout); } + /* Returns true if this interpreter supports using the readline library; false if it uses GDB's own simplified readline emulation. */ diff --git a/gdb/iq2000-tdep.c b/gdb/iq2000-tdep.c index 49ae744..58a4dfb 100644 --- a/gdb/iq2000-tdep.c +++ b/gdb/iq2000-tdep.c @@ -840,9 +840,7 @@ iq2000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) Initializer function for the iq2000 module. Called by gdb at start-up. */ -void _initialize_iq2000_tdep (); -void -_initialize_iq2000_tdep () +INIT_GDB_FILE (iq2000_tdep) { gdbarch_register (bfd_arch_iq2000, iq2000_gdbarch_init); } @@ -584,7 +584,7 @@ finalize_symtab (struct gdb_symtab *stab, struct objfile *objfile) /* The name. */ block_name->set_domain (FUNCTION_DOMAIN); - block_name->set_aclass_index (LOC_BLOCK); + block_name->set_loc_class_index (LOC_BLOCK); block_name->set_symtab (filetab); block_name->set_type (lookup_function_type (block_type)); block_name->set_value_block (new_block); @@ -1313,9 +1313,7 @@ show_jit_reader_directory (const char *args, int from_tty) jit_reader_dir.c_str ())); } -void _initialize_jit (); -void -_initialize_jit () +INIT_GDB_FILE (jit) { jit_reader_dir = relocate_gdb_directory (JIT_READER_DIR, JIT_READER_DIR_RELOCATABLE); diff --git a/gdb/language.c b/gdb/language.c index 18a7c9c..212a236 100644 --- a/gdb/language.c +++ b/gdb/language.c @@ -976,7 +976,7 @@ language_arch_info::type_and_symbol::alloc_type_symbol symbol->set_section_index (0); symbol->set_type (type); symbol->set_domain (TYPE_DOMAIN); - symbol->set_aclass_index (LOC_TYPEDEF); + symbol->set_loc_class_index (LOC_TYPEDEF); return symbol; } @@ -1095,9 +1095,7 @@ language_lookup_primitive_type_as_symbol (const struct language_defn *la, /* Initialize the language routines. */ -void _initialize_language (); -void -_initialize_language () +INIT_GDB_FILE (language) { static const char *const type_or_range_names[] = { "on", "off", "warn", "auto", NULL }; diff --git a/gdb/linespec.c b/gdb/linespec.c index d42420c..cefee02 100644 --- a/gdb/linespec.c +++ b/gdb/linespec.c @@ -230,7 +230,7 @@ collect_info::add_symbol (block_symbol *bsym) { /* In list mode, add all matching symbols, regardless of class. This allows the user to type "list a_global_variable". */ - if (bsym->symbol->aclass () == LOC_BLOCK || this->state->list_mode) + if (bsym->symbol->loc_class () == LOC_BLOCK || this->state->list_mode) this->result.symbols->push_back (*bsym); /* Continue iterating. */ @@ -1016,7 +1016,7 @@ linespec_lexer_consume_token (linespec_parser *parser) if (*parser->lexer.stream != '\0') { parser->completion_quote_char = '\0'; - parser->completion_quote_end = NULL;; + parser->completion_quote_end = NULL; } } @@ -1074,6 +1074,12 @@ add_sal_to_sals (struct linespec_state *self, struct symtab_and_line *sal, const char *symname, bool literal_canonical) { + /* We don't want two SALs with the same PC from the + same program space. */ + for (const auto &s : *sals) + if (sal->pc == s.pc && sal->pspace == s.pspace) + return; + sals->push_back (*sal); if (self->canonical) @@ -2123,7 +2129,7 @@ create_sals_line_offset (struct linespec_state *self, line 16 will also result in a breakpoint in main, at line 17. */ if (!was_exact && sym != nullptr - && sym->aclass () == LOC_BLOCK + && sym->loc_class () == LOC_BLOCK && sal.pc == sym->value_block ()->entry_pc () && val.line < sym->line ()) continue; @@ -2218,7 +2224,7 @@ convert_linespec_to_sals (struct linespec_state *state, linespec *ls) if (state->funfirstline && !ls->minimal_symbols.empty () - && sym.symbol->aclass () == LOC_BLOCK) + && sym.symbol->loc_class () == LOC_BLOCK) { const CORE_ADDR addr = sym.symbol->value_block ()->entry_pc (); @@ -3355,7 +3361,7 @@ decode_compound_collector::operator () (block_symbol *bsym) struct type *t; struct symbol *sym = bsym->symbol; - if (sym->aclass () != LOC_TYPEDEF) + if (sym->loc_class () != LOC_TYPEDEF) return true; /* Continue iterating. */ t = sym->type (); @@ -3407,30 +3413,52 @@ lookup_prefix_sym (struct linespec_state *state, return collector.release_symbols (); } -/* A std::sort comparison function for symbols. The resulting order does - not actually matter; we just need to be able to sort them so that - symbols with the same program space end up next to each other. */ +/* Compare pspace A and B based on program space ID. Return 0 if equal, + 1 if A->num > B->num, -1 otherwise (modeled on strcmp). */ -static bool -compare_symbols (const block_symbol &a, const block_symbol &b) +static int +compare_pspace (const struct program_space *a, const struct program_space *b) { - uintptr_t uia, uib; + if (a->num > b->num) + return 1; - uia = (uintptr_t) a.symbol->symtab ()->compunit ()->objfile ()->pspace (); - uib = (uintptr_t) b.symbol->symtab ()->compunit ()->objfile ()->pspace (); + if (a->num < b->num) + return -1; - if (uia < uib) - return true; - if (uia > uib) - return false; + return 0; +} + +/* An std::sort comparison function for pointers. Don't use this if stable + sorting results are required. */ + +static bool +compare_pointers (void *a, void *b) +{ + return (uintptr_t)a < (uintptr_t)b; +} - uia = (uintptr_t) a.symbol; - uib = (uintptr_t) b.symbol; +/* An std::sort comparison function for symbols. The requirement is that + symbols with the same program space end up next to each other. This is for + the purpose of iterating over the symbols and doing something once for each + program space. */ - if (uia < uib) +static bool +compare_symbols (const block_symbol &a, const block_symbol &b) +{ + /* To check for same program space, we could just use a pointer comparison, + which gives unstable sorting results. While the assumption is that this + doesn't matter, play it safe and compare program space IDs instead. */ + int cmp + = compare_pspace (a.symbol->symtab ()->compunit ()->objfile ()->pspace (), + b.symbol->symtab ()->compunit ()->objfile ()->pspace ()); + if (cmp == -1) return true; + if (cmp == 1) + return false; - return false; + /* This gives unstable sorting results. We assume that this doesn't + matter. */ + return compare_pointers (a.symbol, b.symbol); } /* Like compare_symbols but for minimal symbols. */ @@ -3438,23 +3466,16 @@ compare_symbols (const block_symbol &a, const block_symbol &b) static bool compare_msymbols (const bound_minimal_symbol &a, const bound_minimal_symbol &b) { - uintptr_t uia, uib; - - uia = (uintptr_t) a.objfile->pspace (); - uib = (uintptr_t) a.objfile->pspace (); - - if (uia < uib) + /* See comment in compare_symbols for use of compare_pspace. */ + int cmp = compare_pspace (a.objfile->pspace (), a.objfile->pspace ()); + if (cmp == -1) return true; - if (uia > uib) + if (cmp == 1) return false; - uia = (uintptr_t) a.minsym; - uib = (uintptr_t) b.minsym; - - if (uia < uib) - return true; - - return false; + /* This gives unstable sorting results. We assume that this doesn't + matter. */ + return compare_pointers (a.minsym, b.minsym); } /* Look for all the matching instances of each symbol in NAMES. Only @@ -4295,14 +4316,14 @@ static bool symbol_to_sal (struct symtab_and_line *result, bool funfirstline, struct symbol *sym) { - if (sym->aclass () == LOC_BLOCK) + if (sym->loc_class () == LOC_BLOCK) { *result = find_function_start_sal (sym, funfirstline); return true; } else { - if (sym->aclass () == LOC_LABEL && sym->value_address () != 0) + if (sym->loc_class () == LOC_LABEL && sym->value_address () != 0) { *result = {}; result->symtab = sym->symtab (); diff --git a/gdb/linux-fork.c b/gdb/linux-fork.c index 338ba03..9e986d8 100644 --- a/gdb/linux-fork.c +++ b/gdb/linux-fork.c @@ -1115,9 +1115,7 @@ restart_command (const char *args, int from_tty) linux_fork_context (fp, from_tty, inf); } -void _initialize_linux_fork (); -void -_initialize_linux_fork () +INIT_GDB_FILE (linux_fork) { /* Checkpoint command: create a fork of the inferior process and set it aside for later debugging. */ diff --git a/gdb/linux-nat.c b/gdb/linux-nat.c index 2f98060..c3c5ddf 100644 --- a/gdb/linux-nat.c +++ b/gdb/linux-nat.c @@ -51,17 +51,13 @@ #include <pwd.h> #include <sys/types.h> #include <dirent.h> -#include "xml-support.h" #include <sys/vfs.h> -#include "solib.h" #include "nat/linux-osdata.h" #include "linux-tdep.h" -#include "symfile.h" #include "gdbsupport/agent.h" #include "tracepoint.h" #include "target-descriptions.h" #include "gdbsupport/filestuff.h" -#include "objfiles.h" #include "nat/linux-namespaces.h" #include "gdbsupport/block-signals.h" #include "gdbsupport/fileio.h" @@ -553,8 +549,8 @@ linux_nat_target::follow_fork (inferior *child_inf, ptid_t child_ptid, /* Note that we consult the parent's architecture instead of the child's because there's no inferior for the child at this point. */ - if (!gdbarch_software_single_step_p (target_thread_architecture - (parent_ptid))) + if (!gdbarch_get_next_pcs_p (target_thread_architecture + (parent_ptid))) { int status; @@ -2129,7 +2125,7 @@ linux_handle_extended_wait (struct lwp_info *lp, int status) open_proc_mem_file (lp->ptid); ourstatus->set_execd - (make_unique_xstrdup (linux_proc_pid_to_exec_file (pid))); + (make_unique_xstrdup (linux_target->pid_to_exec_file (pid))); /* The thread that execed must have been resumed, but, when a thread execs, it changes its tid to the tgid, and the old @@ -4000,7 +3996,14 @@ linux_nat_target::thread_name (struct thread_info *thr) const char * linux_nat_target::pid_to_exec_file (int pid) { - return linux_proc_pid_to_exec_file (pid); + /* If there's no sysroot. Or the sysroot is just 'target:' and the + inferior is in the same mount namespce, then we can consider the + filesystem local. */ + bool local_fs = (gdb_sysroot.empty () + || (gdb_sysroot == TARGET_SYSROOT_PREFIX + && linux_ns_same (pid, LINUX_NS_MNT))); + + return linux_proc_pid_to_exec_file (pid, local_fs); } /* Object representing an /proc/PID/mem open file. We keep one such @@ -4585,6 +4588,20 @@ linux_nat_target::fileio_open (struct inferior *inf, const char *filename, return fd; } +/* Implementation of to_fileio_lstat. */ + +int +linux_nat_target::fileio_lstat (struct inferior *inf, const char *filename, + struct stat *sb, fileio_error *target_errno) +{ + int r = linux_mntns_lstat (linux_nat_fileio_pid_of (inf), filename, sb); + + if (r == -1) + *target_errno = host_to_fileio_error (errno); + + return r; +} + /* Implementation of to_fileio_readlink. */ std::optional<std::string> @@ -4707,9 +4724,7 @@ maintenance_info_lwps (const char *arg, int from_tty) } } -void _initialize_linux_nat (); -void -_initialize_linux_nat () +INIT_GDB_FILE (linux_nat) { add_setshow_boolean_cmd ("linux-nat", class_maintenance, &debug_linux_nat, _("\ diff --git a/gdb/linux-nat.h b/gdb/linux-nat.h index 6e53991..7cbe9a9 100644 --- a/gdb/linux-nat.h +++ b/gdb/linux-nat.h @@ -108,6 +108,9 @@ public: const char *filename, fileio_error *target_errno) override; + int fileio_lstat (struct inferior *inf, const char *filename, + struct stat *sb, fileio_error *target_errno) override; + int fileio_unlink (struct inferior *inf, const char *filename, fileio_error *target_errno) override; @@ -276,12 +279,12 @@ struct lwp_info : intrusive_list_node<lwp_info> will be recorded here, while 'status == 0' is ambiguous. */ struct target_waitstatus waitstatus; - /* Signal whether we are in a SYSCALL_ENTRY or - in a SYSCALL_RETURN event. - Values: - - TARGET_WAITKIND_SYSCALL_ENTRY - - TARGET_WAITKIND_SYSCALL_RETURN */ - enum target_waitkind syscall_state; + /* Signal whether we are in a SYSCALL_ENTRY or SYSCALL_RETURN event. + + Valid values are TARGET_WAITKIND_SYSCALL_ENTRY, + TARGET_WAITKIND_SYSCALL_RETURN, or TARGET_WAITKIND_SYSCALL_IGNORE, when + not stopped at a syscall. */ + target_waitkind syscall_state = TARGET_WAITKIND_IGNORE; /* The processor core this LWP was last seen on. */ int core = -1; diff --git a/gdb/linux-tdep.c b/gdb/linux-tdep.c index bbffb3d..5c4bbf6 100644 --- a/gdb/linux-tdep.c +++ b/gdb/linux-tdep.c @@ -630,9 +630,9 @@ mapping_is_anonymous_p (const char *filename) return 0; } -/* Return 0 if the memory mapping (which is related to FILTERFLAGS, V, - MAYBE_PRIVATE_P, MAPPING_ANONYMOUS_P, ADDR and OFFSET) should not - be dumped, or greater than 0 if it should. +/* Return false if the memory mapping represented by MAP should not be + dumped, or true if it should. FILTERFLAGS guides which mappings + should be dumped. In a nutshell, this is the logic that we follow in order to decide if a mapping should be dumped or not. @@ -677,11 +677,14 @@ mapping_is_anonymous_p (const char *filename) header (of a DSO or an executable, for example). If it is, and if the user is interested in dump it, then we should dump it. */ -static int -dump_mapping_p (filter_flags filterflags, const struct smaps_vmflags *v, - int maybe_private_p, int mapping_anon_p, int mapping_file_p, - const char *filename, ULONGEST addr, ULONGEST offset) +static bool +dump_mapping_p (filter_flags filterflags, const smaps_data &map) { + /* Older Linux kernels did not support the "Anonymous:" counter. + If it is missing, we can't be sure what to dump, so dump everything. */ + if (!map.has_anonymous) + return true; + /* Initially, we trust in what we received from our caller. This value may not be very precise (i.e., it was probably gathered from the permission line in the /proc/PID/smaps list, which @@ -689,41 +692,42 @@ dump_mapping_p (filter_flags filterflags, const struct smaps_vmflags *v, what we have until we take a look at the "VmFlags:" field (assuming that the version of the Linux kernel being used supports it, of course). */ - int private_p = maybe_private_p; - int dump_p; + int private_p = map.priv; /* We always dump vDSO and vsyscall mappings, because it's likely that there'll be no file to read the contents from at core load time. The kernel does the same. */ - if (strcmp ("[vdso]", filename) == 0 - || strcmp ("[vsyscall]", filename) == 0) - return 1; + if (map.filename == "[vdso]" || map.filename == "[vsyscall]") + return true; - if (v->initialized_p) + if (map.vmflags.initialized_p) { /* We never dump I/O mappings. */ - if (v->io_page) - return 0; + if (map.vmflags.io_page) + return false; /* Check if we should exclude this mapping. */ - if (!dump_excluded_mappings && v->exclude_coredump) - return 0; + if (!dump_excluded_mappings && map.vmflags.exclude_coredump) + return false; /* Update our notion of whether this mapping is shared or private based on a trustworthy value. */ - private_p = !v->shared_mapping; + private_p = !map.vmflags.shared_mapping; /* HugeTLB checking. */ - if (v->uses_huge_tlb) + if (map.vmflags.uses_huge_tlb) { if ((private_p && (filterflags & COREFILTER_HUGETLB_PRIVATE)) || (!private_p && (filterflags & COREFILTER_HUGETLB_SHARED))) - return 1; + return true; - return 0; + return false; } } + int mapping_anon_p = map.mapping_anon_p; + int mapping_file_p = map.mapping_file_p; + bool dump_p; if (private_p) { if (mapping_anon_p && mapping_file_p) @@ -763,7 +767,7 @@ dump_mapping_p (filter_flags filterflags, const struct smaps_vmflags *v, A mapping contains an ELF header if it is a private mapping, its offset is zero, and its first word is ELFMAG. */ - if (!dump_p && private_p && offset == 0 + if (!dump_p && private_p && map.offset == 0 && (filterflags & COREFILTER_ELF_HEADERS) != 0) { /* Useful define specifying the size of the ELF magical @@ -774,7 +778,7 @@ dump_mapping_p (filter_flags filterflags, const struct smaps_vmflags *v, /* Let's check if we have an ELF header. */ gdb_byte h[SELFMAG]; - if (target_read_memory (addr, h, SELFMAG) == 0) + if (target_read_memory (map.start_address, h, SELFMAG) == 0) { /* The EI_MAG* and ELFMAG* constants come from <elf/common.h>. */ @@ -783,7 +787,7 @@ dump_mapping_p (filter_flags filterflags, const struct smaps_vmflags *v, { /* This mapping contains an ELF header, so we should dump it. */ - dump_p = 1; + dump_p = true; } } } @@ -794,20 +798,24 @@ dump_mapping_p (filter_flags filterflags, const struct smaps_vmflags *v, /* As above, but return true only when we should dump the NT_FILE entry. */ -static int -dump_note_entry_p (filter_flags filterflags, const struct smaps_vmflags *v, - int maybe_private_p, int mapping_anon_p, int mapping_file_p, - const char *filename, ULONGEST addr, ULONGEST offset) +static bool +dump_note_entry_p (filter_flags filterflags, const smaps_data &map) { - /* vDSO and vsyscall mappings will end up in the core file. Don't - put them in the NT_FILE note. */ - if (strcmp ("[vdso]", filename) == 0 - || strcmp ("[vsyscall]", filename) == 0) - return 0; + /* No NT_FILE entry for mappings with no filename. */ + if (map.filename.length () == 0) + return false; + + /* Special kernel mappings, those with names like '[vdso]' and + '[vsyscall]' will be placed in the core file, but shouldn't get an + NT_FILE entry. These special mappings all have a zero inode. */ + if (map.inode == 0 + && map.filename.front () == '[' + && map.filename.back () == ']') + return false; /* Otherwise, any other file-based mapping should be placed in the note. */ - return 1; + return true; } /* Implement the "info proc" command. */ @@ -1314,21 +1322,15 @@ linux_core_xfer_siginfo (struct gdbarch *gdbarch, gdb_byte *readbuf, } typedef int linux_find_memory_region_ftype (ULONGEST vaddr, ULONGEST size, - ULONGEST offset, ULONGEST inode, + ULONGEST offset, int read, int write, int exec, int modified, bool memory_tagged, - const char *filename, + const std::string &filename, void *data); -typedef int linux_dump_mapping_p_ftype (filter_flags filterflags, - const struct smaps_vmflags *v, - int maybe_private_p, - int mapping_anon_p, - int mapping_file_p, - const char *filename, - ULONGEST addr, - ULONGEST offset); +typedef bool linux_dump_mapping_p_ftype (filter_flags filterflags, + const smaps_data &map); /* Helper function to parse the contents of /proc/<pid>/smaps into a data structure, for easy access. @@ -1590,35 +1592,15 @@ linux_find_memory_regions_full (struct gdbarch *gdbarch, for (const struct smaps_data &map : smaps) { - int should_dump_p = 0; - - if (map.has_anonymous) - { - should_dump_p - = should_dump_mapping_p (filterflags, &map.vmflags, - map.priv, - map.mapping_anon_p, - map.mapping_file_p, - map.filename.c_str (), - map.start_address, - map.offset); - } - else - { - /* Older Linux kernels did not support the "Anonymous:" counter. - If it is missing, we can't be sure - dump all the pages. */ - should_dump_p = 1; - } - /* Invoke the callback function to create the corefile segment. */ - if (should_dump_p) + if (should_dump_mapping_p (filterflags, map)) { func (map.start_address, map.end_address - map.start_address, - map.offset, map.inode, map.read, map.write, map.exec, + map.offset, map.read, map.write, map.exec, 1, /* MODIFIED is true because we want to dump the mapping. */ map.vmflags.memory_tagging != 0, - map.filename.c_str (), obfd); + map.filename, obfd); } } @@ -1644,10 +1626,10 @@ struct linux_find_memory_regions_data static int linux_find_memory_regions_thunk (ULONGEST vaddr, ULONGEST size, - ULONGEST offset, ULONGEST inode, + ULONGEST offset, int read, int write, int exec, int modified, bool memory_tagged, - const char *filename, void *arg) + const std::string &filename, void *arg) { struct linux_find_memory_regions_data *data = (struct linux_find_memory_regions_data *) arg; @@ -1693,8 +1675,6 @@ struct linux_make_mappings_data struct type *long_type; }; -static linux_find_memory_region_ftype linux_make_mappings_callback; - /* A callback for linux_find_memory_regions_full that updates the mappings data for linux_make_mappings_corefile_notes. @@ -1703,17 +1683,16 @@ static linux_find_memory_region_ftype linux_make_mappings_callback; static int linux_make_mappings_callback (ULONGEST vaddr, ULONGEST size, - ULONGEST offset, ULONGEST inode, + ULONGEST offset, int read, int write, int exec, int modified, bool memory_tagged, - const char *filename, void *data) + const std::string &filename, void *data) { struct linux_make_mappings_data *map_data = (struct linux_make_mappings_data *) data; gdb_byte buf[sizeof (ULONGEST)]; - if (*filename == '\0' || inode == 0) - return 0; + gdb_assert (filename.length () > 0); ++map_data->file_count; @@ -1724,7 +1703,7 @@ linux_make_mappings_callback (ULONGEST vaddr, ULONGEST size, pack_long (buf, map_data->long_type, offset); obstack_grow (map_data->data_obstack, buf, map_data->long_type->length ()); - obstack_grow_str0 (map_data->filename_obstack, filename); + obstack_grow_str0 (map_data->filename_obstack, filename.c_str ()); return 0; } @@ -3102,9 +3081,7 @@ linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch, linux_corefile_parse_exec_context); } -void _initialize_linux_tdep (); -void -_initialize_linux_tdep () +INIT_GDB_FILE (linux_tdep) { /* Observers used to invalidate the cache when needed. */ gdb::observers::inferior_exit.attach (invalidate_linux_cache_inf, @@ -3139,64 +3116,3 @@ more information about this file, refer to the manpage of proc(5) and core(5).") &setlist, &showlist); } - -/* Fetch (and possibly build) an appropriate `link_map_offsets' for - ILP32/LP64 Linux systems which don't have the r_ldsomap field. */ - -link_map_offsets * -linux_ilp32_fetch_link_map_offsets () -{ - static link_map_offsets lmo; - static link_map_offsets *lmp = nullptr; - - if (lmp == nullptr) - { - lmp = &lmo; - - lmo.r_version_offset = 0; - lmo.r_version_size = 4; - lmo.r_map_offset = 4; - lmo.r_brk_offset = 8; - lmo.r_ldsomap_offset = -1; - lmo.r_next_offset = 20; - - /* Everything we need is in the first 20 bytes. */ - lmo.link_map_size = 20; - lmo.l_addr_offset = 0; - lmo.l_name_offset = 4; - lmo.l_ld_offset = 8; - lmo.l_next_offset = 12; - lmo.l_prev_offset = 16; - } - - return lmp; -} - -link_map_offsets * -linux_lp64_fetch_link_map_offsets () -{ - static link_map_offsets lmo; - static link_map_offsets *lmp = nullptr; - - if (lmp == nullptr) - { - lmp = &lmo; - - lmo.r_version_offset = 0; - lmo.r_version_size = 4; - lmo.r_map_offset = 8; - lmo.r_brk_offset = 16; - lmo.r_ldsomap_offset = -1; - lmo.r_next_offset = 40; - - /* Everything we need is in the first 40 bytes. */ - lmo.link_map_size = 40; - lmo.l_addr_offset = 0; - lmo.l_name_offset = 8; - lmo.l_ld_offset = 16; - lmo.l_next_offset = 24; - lmo.l_prev_offset = 32; - } - - return lmp; -} diff --git a/gdb/linux-tdep.h b/gdb/linux-tdep.h index 7485fc1..3d82ea5 100644 --- a/gdb/linux-tdep.h +++ b/gdb/linux-tdep.h @@ -22,6 +22,7 @@ #include "bfd.h" #include "displaced-stepping.h" +#include "solib.h" struct inferior; struct regcache; @@ -112,9 +113,4 @@ extern CORE_ADDR linux_get_hwcap2 (const std::optional<gdb::byte_vector> &auxv, extern CORE_ADDR linux_get_hwcap2 (); -/* Fetch (and possibly build) an appropriate `struct link_map_offsets' - for ILP32 and LP64 Linux systems. */ -extern struct link_map_offsets *linux_ilp32_fetch_link_map_offsets (); -extern struct link_map_offsets *linux_lp64_fetch_link_map_offsets (); - #endif /* GDB_LINUX_TDEP_H */ diff --git a/gdb/linux-thread-db.c b/gdb/linux-thread-db.c index f60116a..8d49508 100644 --- a/gdb/linux-thread-db.c +++ b/gdb/linux-thread-db.c @@ -1981,9 +1981,7 @@ maintenance_check_libthread_db (const char *args, int from_tty) check_thread_db (info, true); } -void _initialize_thread_db (); -void -_initialize_thread_db () +INIT_GDB_FILE (thread_db) { /* Defer loading of libthread_db.so until inferior is running. This allows gdb to load correct libthread_db for a given diff --git a/gdb/lm32-tdep.c b/gdb/lm32-tdep.c index ef956b8..cee2e51 100644 --- a/gdb/lm32-tdep.c +++ b/gdb/lm32-tdep.c @@ -536,9 +536,7 @@ lm32_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_lm32_tdep (); -void -_initialize_lm32_tdep () +INIT_GDB_FILE (lm32_tdep) { gdbarch_register (bfd_arch_lm32, lm32_gdbarch_init); } diff --git a/gdb/loongarch-linux-nat.c b/gdb/loongarch-linux-nat.c index 3efaa5f..1360acf 100644 --- a/gdb/loongarch-linux-nat.c +++ b/gdb/loongarch-linux-nat.c @@ -72,8 +72,6 @@ public: struct expression *cond) override; int remove_watchpoint (CORE_ADDR addr, int len, enum target_hw_bp_type type, struct expression *cond) override; - bool watchpoint_addr_within_range (CORE_ADDR addr, CORE_ADDR start, - int length) override; /* Add our hardware breakpoint and watchpoint implementation. */ bool stopped_by_watchpoint () override; @@ -581,15 +579,6 @@ loongarch_linux_nat_target::remove_watchpoint (CORE_ADDR addr, int len, } -bool -loongarch_linux_nat_target::watchpoint_addr_within_range (CORE_ADDR addr, - CORE_ADDR start, - int length) -{ - return start <= addr && start + length - 1 >= addr; -} - - /* Implement the "stopped_data_address" target_ops method. */ bool @@ -751,9 +740,7 @@ loongarch_linux_nat_target::low_forget_process (pid_t pid) /* Initialize LoongArch Linux native support. */ -void _initialize_loongarch_linux_nat (); -void -_initialize_loongarch_linux_nat () +INIT_GDB_FILE (loongarch_linux_nat) { linux_target = &the_loongarch_linux_nat_target; add_inf_child_target (&the_loongarch_linux_nat_target); diff --git a/gdb/loongarch-linux-tdep.c b/gdb/loongarch-linux-tdep.c index 38485e0..3766338 100644 --- a/gdb/loongarch-linux-tdep.c +++ b/gdb/loongarch-linux-tdep.c @@ -25,6 +25,7 @@ #include "inferior.h" #include "linux-record.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "loongarch-tdep.h" #include "record-full.h" #include "regset.h" @@ -1145,10 +1146,9 @@ loongarch_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) linux_init_abi (info, gdbarch, 0); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - info.bfd_arch_info->bits_per_address == 32 - ? linux_ilp32_fetch_link_map_offsets - : linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, (info.bfd_arch_info->bits_per_address == 32 + ? make_linux_ilp32_svr4_solib_ops + : make_linux_lp64_svr4_solib_ops)); /* GNU/Linux uses SVR4-style shared libraries. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); @@ -1183,9 +1183,7 @@ loongarch_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Initialize LoongArch Linux target support. */ -void _initialize_loongarch_linux_tdep (); -void -_initialize_loongarch_linux_tdep () +INIT_GDB_FILE (loongarch_linux_tdep) { gdbarch_register_osabi (bfd_arch_loongarch, bfd_mach_loongarch32, GDB_OSABI_LINUX, loongarch_linux_init_abi); diff --git a/gdb/loongarch-tdep.c b/gdb/loongarch-tdep.c index 092127dd..3bf47d2 100644 --- a/gdb/loongarch-tdep.c +++ b/gdb/loongarch-tdep.c @@ -74,7 +74,9 @@ loongarch_insn_is_cond_branch (insn_t insn) || (insn & 0xfc000000) == 0x68000000 /* bltu */ || (insn & 0xfc000000) == 0x6c000000 /* bgeu */ || (insn & 0xfc000000) == 0x40000000 /* beqz */ - || (insn & 0xfc000000) == 0x44000000) /* bnez */ + || (insn & 0xfc000000) == 0x44000000 /* bnez */ + || (insn & 0xfc000300) == 0x48000000 /* bceqz */ + || (insn & 0xfc000300) == 0x48000100) /* bcnez */ return true; return false; } @@ -314,6 +316,20 @@ loongarch_next_pc (struct regcache *regcache, CORE_ADDR cur_pc) if (rj != 0) next_pc = cur_pc + loongarch_decode_imm ("0:5|10:16<<2", insn, 1); } + else if ((insn & 0xfc000300) == 0x48000000) /* bceqz cj, offs21 */ + { + LONGEST cj = regcache_raw_get_signed (regcache, + loongarch_decode_imm ("5:3", insn, 0) + LOONGARCH_FIRST_FCC_REGNUM); + if (cj == 0) + next_pc = cur_pc + loongarch_decode_imm ("0:5|10:16<<2", insn, 1); + } + else if ((insn & 0xfc000300) == 0x48000100) /* bcnez cj, offs21 */ + { + LONGEST cj = regcache_raw_get_signed (regcache, + loongarch_decode_imm ("5:3", insn, 0) + LOONGARCH_FIRST_FCC_REGNUM); + if (cj != 0) + next_pc = cur_pc + loongarch_decode_imm ("0:5|10:16<<2", insn, 1); + } else if ((insn & 0xffff8000) == 0x002b0000) /* syscall */ { if (tdep->syscall_next_pc != nullptr) @@ -1879,7 +1895,7 @@ loongarch_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_frame_align (gdbarch, loongarch_frame_align); /* Breakpoint manipulation. */ - set_gdbarch_software_single_step (gdbarch, loongarch_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, loongarch_software_single_step); set_gdbarch_breakpoint_kind_from_pc (gdbarch, loongarch_breakpoint::kind_from_pc); set_gdbarch_sw_breakpoint_from_kind (gdbarch, loongarch_breakpoint::bp_from_kind); set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1); @@ -2405,9 +2421,7 @@ loongarch_process_record (struct gdbarch *gdbarch, struct regcache *regcache, return ret; } -void _initialize_loongarch_tdep (); -void -_initialize_loongarch_tdep () +INIT_GDB_FILE (loongarch_tdep) { gdbarch_register (bfd_arch_loongarch, loongarch_gdbarch_init, nullptr); } diff --git a/gdb/m2-exp.y b/gdb/m2-exp.y index 5c31a5e..55d5f2e 100644 --- a/gdb/m2-exp.y +++ b/gdb/m2-exp.y @@ -507,7 +507,7 @@ fblock : block COLONCOLON BLOCKNAME { struct symbol *tem = lookup_symbol (copy_name ($3).c_str (), $1, SEARCH_VFT, 0).symbol; - if (!tem || tem->aclass () != LOC_BLOCK) + if (!tem || tem->loc_class () != LOC_BLOCK) error (_("No function \"%s\" in specified context."), copy_name ($3).c_str ()); $$ = tem; @@ -928,7 +928,7 @@ yylex (void) sym = lookup_symbol (tmp.c_str (), pstate->expression_context_block, SEARCH_VFT, 0).symbol; - if (sym && sym->aclass () == LOC_BLOCK) + if (sym && sym->loc_class () == LOC_BLOCK) return BLOCKNAME; if (lookup_typename (pstate->language (), tmp.c_str (), pstate->expression_context_block, 1)) @@ -936,7 +936,7 @@ yylex (void) if(sym) { - switch(sym->aclass ()) + switch(sym->loc_class ()) { case LOC_STATIC: case LOC_REGISTER: diff --git a/gdb/m32c-tdep.c b/gdb/m32c-tdep.c index f8937a2..8d99839 100644 --- a/gdb/m32c-tdep.c +++ b/gdb/m32c-tdep.c @@ -2653,9 +2653,7 @@ m32c_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_m32c_tdep (); -void -_initialize_m32c_tdep () +INIT_GDB_FILE (m32c_tdep) { gdbarch_register (bfd_arch_m32c, m32c_gdbarch_init); diff --git a/gdb/m32r-linux-nat.c b/gdb/m32r-linux-nat.c index 7607bd2..c186693 100644 --- a/gdb/m32r-linux-nat.c +++ b/gdb/m32r-linux-nat.c @@ -234,9 +234,7 @@ m32r_linux_nat_target::store_registers (struct regcache *regcache, int regno) internal_error (_("Got request to store bad register number %d."), regno); } -void _initialize_m32r_linux_nat (); -void -_initialize_m32r_linux_nat () +INIT_GDB_FILE (m32r_linux_nat) { /* Register the target. */ linux_target = &the_m32r_linux_nat_target; diff --git a/gdb/m32r-linux-tdep.c b/gdb/m32r-linux-tdep.c index 4fbe7d9..03000cc 100644 --- a/gdb/m32r-linux-tdep.c +++ b/gdb/m32r-linux-tdep.c @@ -36,6 +36,7 @@ #include "m32r-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "gdbarch.h" @@ -461,8 +462,7 @@ m32r_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* GNU/Linux uses SVR4-style shared libraries. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); /* Core file support. */ set_gdbarch_iterate_over_regset_sections @@ -473,9 +473,7 @@ m32r_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) svr4_fetch_objfile_link_map); } -void _initialize_m32r_linux_tdep (); -void -_initialize_m32r_linux_tdep () +INIT_GDB_FILE (m32r_linux_tdep) { gdbarch_register_osabi (bfd_arch_m32r, 0, GDB_OSABI_LINUX, m32r_linux_init_abi); diff --git a/gdb/m32r-tdep.c b/gdb/m32r-tdep.c index 6b6ad03..4ac08fd 100644 --- a/gdb/m32r-tdep.c +++ b/gdb/m32r-tdep.c @@ -908,9 +908,7 @@ m32r_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_m32r_tdep (); -void -_initialize_m32r_tdep () +INIT_GDB_FILE (m32r_tdep) { gdbarch_register (bfd_arch_m32r, m32r_gdbarch_init); } diff --git a/gdb/m68hc11-tdep.c b/gdb/m68hc11-tdep.c index dd8cbda..5389fee 100644 --- a/gdb/m68hc11-tdep.c +++ b/gdb/m68hc11-tdep.c @@ -1527,9 +1527,7 @@ m68hc11_gdbarch_init (struct gdbarch_info info, return gdbarch; } -void _initialize_m68hc11_tdep (); -void -_initialize_m68hc11_tdep () +INIT_GDB_FILE (m68hc11_tdep) { gdbarch_register (bfd_arch_m68hc11, m68hc11_gdbarch_init); gdbarch_register (bfd_arch_m68hc12, m68hc11_gdbarch_init); diff --git a/gdb/m68k-bsd-nat.c b/gdb/m68k-bsd-nat.c index 04542fd..ae8fa4d 100644 --- a/gdb/m68k-bsd-nat.c +++ b/gdb/m68k-bsd-nat.c @@ -225,9 +225,7 @@ m68kbsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) return 1; } -void _initialize_m68kbsd_nat (); -void -_initialize_m68kbsd_nat () +INIT_GDB_FILE (m68kbsd_nat) { add_inf_child_target (&the_m68k_bsd_nat_target); diff --git a/gdb/m68k-bsd-tdep.c b/gdb/m68k-bsd-tdep.c index 09c57c6..37c1464 100644 --- a/gdb/m68k-bsd-tdep.c +++ b/gdb/m68k-bsd-tdep.c @@ -147,13 +147,10 @@ m68kbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->struct_return = pcc_struct_return; /* NetBSD ELF uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); } -void _initialize_m68kbsd_tdep (); -void -_initialize_m68kbsd_tdep () +INIT_GDB_FILE (m68kbsd_tdep) { gdbarch_register_osabi (bfd_arch_m68k, 0, GDB_OSABI_NETBSD, m68kbsd_init_abi); diff --git a/gdb/m68k-linux-nat.c b/gdb/m68k-linux-nat.c index d43ed68..02286ff 100644 --- a/gdb/m68k-linux-nat.c +++ b/gdb/m68k-linux-nat.c @@ -508,9 +508,7 @@ ps_get_thread_area (struct ps_prochandle *ph, return PS_OK; } -void _initialize_m68k_linux_nat (); -void -_initialize_m68k_linux_nat () +INIT_GDB_FILE (m68k_linux_nat) { /* Register the target. */ linux_target = &the_m68k_linux_nat_target; diff --git a/gdb/m68k-linux-tdep.c b/gdb/m68k-linux-tdep.c index cfc37ab..bd2a14a 100644 --- a/gdb/m68k-linux-tdep.c +++ b/gdb/m68k-linux-tdep.c @@ -35,6 +35,7 @@ #include "observable.h" #include "elf/common.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "regset.h" /* Offsets (in target ints) into jmp_buf. */ @@ -407,8 +408,7 @@ m68k_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Shared library handling. */ /* GNU/Linux uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); /* GNU/Linux uses the dynamic linker included in the GNU C Library. */ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); @@ -424,9 +424,7 @@ m68k_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) svr4_fetch_objfile_link_map); } -void _initialize_m68k_linux_tdep (); -void -_initialize_m68k_linux_tdep () +INIT_GDB_FILE (m68k_linux_tdep) { gdbarch_register_osabi (bfd_arch_m68k, 0, GDB_OSABI_LINUX, m68k_linux_init_abi); diff --git a/gdb/m68k-tdep.c b/gdb/m68k-tdep.c index 4e25518..94bfddb 100644 --- a/gdb/m68k-tdep.c +++ b/gdb/m68k-tdep.c @@ -1365,9 +1365,7 @@ m68k_osabi_sniffer (bfd *abfd) return osabi; } -void _initialize_m68k_tdep (); -void -_initialize_m68k_tdep () +INIT_GDB_FILE (m68k_tdep) { gdbarch_register (bfd_arch_m68k, m68k_gdbarch_init, m68k_dump_tdep); diff --git a/gdb/machoread.c b/gdb/machoread.c index cc8aca3..ffee181 100644 --- a/gdb/machoread.c +++ b/gdb/machoread.c @@ -940,9 +940,7 @@ static const struct sym_fns macho_sym_fns = { NULL, /* sym_get_probes */ }; -void _initialize_machoread (); -void -_initialize_machoread () +INIT_GDB_FILE (machoread) { add_symtab_fns (bfd_target_mach_o_flavour, &macho_sym_fns); diff --git a/gdb/macrocmd.c b/gdb/macrocmd.c index 0192a00..d805f3d 100644 --- a/gdb/macrocmd.c +++ b/gdb/macrocmd.c @@ -57,11 +57,11 @@ macro_expand_command (const char *exp, int from_tty) " expression you\n" "want to expand.")); - gdb::unique_xmalloc_ptr<macro_scope> ms = default_macro_scope (); + macro_scope ms = default_macro_scope (); - if (ms != nullptr) + if (ms.is_valid ()) { - gdb::unique_xmalloc_ptr<char> expanded = macro_expand (exp, *ms); + gdb::unique_xmalloc_ptr<char> expanded = macro_expand (exp, ms); gdb_puts ("expands to: "); gdb_puts (expanded.get ()); @@ -85,11 +85,11 @@ macro_expand_once_command (const char *exp, int from_tty) " the expression\n" "you want to expand.")); - gdb::unique_xmalloc_ptr<macro_scope> ms = default_macro_scope (); + macro_scope ms = default_macro_scope (); - if (ms != nullptr) + if (ms.is_valid ()) { - gdb::unique_xmalloc_ptr<char> expanded = macro_expand_once (exp, *ms); + gdb::unique_xmalloc_ptr<char> expanded = macro_expand_once (exp, ms); gdb_puts ("expands to: "); gdb_puts (expanded.get ()); @@ -169,7 +169,6 @@ print_macro_definition (const char *name, static void info_macro_command (const char *args, int from_tty) { - gdb::unique_xmalloc_ptr<struct macro_scope> ms; const char *name; int show_all_macros_named = 0; const char *arg_start = args; @@ -201,15 +200,15 @@ info_macro_command (const char *args, int from_tty) " of the macro\n" "whose definition you want to see.")); - ms = default_macro_scope (); + macro_scope ms = default_macro_scope (); - if (! ms) + if (!ms.is_valid ()) macro_inform_no_debuginfo (); else if (show_all_macros_named) - macro_for_each (ms->file->table, [&] (const char *macro_name, - const macro_definition *macro, - macro_source_file *source, - int line) + macro_for_each (ms.file->table, [&] (const char *macro_name, + const macro_definition *macro, + macro_source_file *source, + int line) { if (strcmp (name, macro_name) == 0) print_macro_definition (name, macro, source, line); @@ -218,12 +217,12 @@ info_macro_command (const char *args, int from_tty) { struct macro_definition *d; - d = macro_lookup_definition (ms->file, ms->line, name); + d = macro_lookup_definition (ms.file, ms.line, name); if (d) { int line; struct macro_source_file *file - = macro_definition_location (ms->file, ms->line, name, &line); + = macro_definition_location (ms.file, ms.line, name, &line); print_macro_definition (name, d, file, line); } @@ -232,7 +231,7 @@ info_macro_command (const char *args, int from_tty) gdb_printf ("The symbol `%s' has no definition as a C/C++" " preprocessor macro\n" "at ", name); - show_pp_source_pos (gdb_stdout, ms->file, ms->line); + show_pp_source_pos (gdb_stdout, ms.file, ms.line); } } } @@ -241,7 +240,7 @@ info_macro_command (const char *args, int from_tty) static void info_macros_command (const char *args, int from_tty) { - gdb::unique_xmalloc_ptr<struct macro_scope> ms; + macro_scope ms; if (args == NULL) ms = default_macro_scope (); @@ -254,10 +253,10 @@ info_macros_command (const char *args, int from_tty) ms = sal_macro_scope (sals[0]); } - if (! ms || ! ms->file || ! ms->file->table) + if (!ms.is_valid () || ms.file->table == nullptr) macro_inform_no_debuginfo (); else - macro_for_each_in_scope (ms->file, ms->line, print_macro_definition); + macro_for_each_in_scope (ms.file, ms.line, print_macro_definition); } @@ -409,9 +408,7 @@ macro_list_command (const char *exp, int from_tty) /* Initializing the `macrocmd' module. */ -void _initialize_macrocmd (); -void -_initialize_macrocmd () +INIT_GDB_FILE (macrocmd) { /* We introduce a new command prefix, `macro', under which we'll put the various commands for working with preprocessor macros. */ diff --git a/gdb/macroscope.c b/gdb/macroscope.c index 97b41b6..a8b78c9 100644 --- a/gdb/macroscope.c +++ b/gdb/macroscope.c @@ -34,28 +34,29 @@ struct macro_table *macro_user_macros; -gdb::unique_xmalloc_ptr<struct macro_scope> +macro_scope sal_macro_scope (struct symtab_and_line sal) { + macro_scope result; struct macro_source_file *main_file, *inclusion; struct compunit_symtab *cust; if (sal.symtab == NULL) - return NULL; + return result; cust = sal.symtab->compunit (); if (cust->macro_table () == NULL) - return NULL; + return result; - gdb::unique_xmalloc_ptr<struct macro_scope> ms (XNEW (struct macro_scope)); + macro_scope ms; main_file = macro_main (cust->macro_table ()); inclusion = macro_lookup_inclusion (main_file, sal.symtab->filename_for_id); if (inclusion) { - ms->file = inclusion; - ms->line = sal.line; + ms.file = inclusion; + ms.line = sal.line; } else { @@ -73,8 +74,8 @@ sal_macro_scope (struct symtab_and_line sal) For the time being, though, we'll just treat these as occurring at the end of the main source file. */ - ms->file = main_file; - ms->line = -1; + ms.file = main_file; + ms.line = -1; complaint (_("symtab found for `%s', but that file\n" "is not covered in the compilation unit's macro information"), @@ -85,27 +86,23 @@ sal_macro_scope (struct symtab_and_line sal) } -gdb::unique_xmalloc_ptr<struct macro_scope> -user_macro_scope (void) +macro_scope +user_macro_scope () { - gdb::unique_xmalloc_ptr<struct macro_scope> ms (XNEW (struct macro_scope)); - ms->file = macro_main (macro_user_macros); - ms->line = -1; - return ms; + return { macro_main (macro_user_macros), -1 }; } -gdb::unique_xmalloc_ptr<struct macro_scope> -default_macro_scope (void) +macro_scope +default_macro_scope () { struct symtab_and_line sal; - gdb::unique_xmalloc_ptr<struct macro_scope> ms; frame_info_ptr frame; - CORE_ADDR pc; + std::optional<CORE_ADDR> pc; /* If there's a selected frame, use its PC. */ frame = deprecated_safe_get_selected_frame (); - if (frame && get_frame_pc_if_available (frame, &pc)) - sal = find_pc_line (pc, 0); + if (frame && (pc = get_frame_pc_if_available (frame))) + sal = find_pc_line (*pc, 0); /* Fall back to the current listing position. */ else @@ -128,8 +125,8 @@ default_macro_scope (void) sal.line = cursal.line; } - ms = sal_macro_scope (sal); - if (! ms) + macro_scope ms = sal_macro_scope (sal); + if (!ms.is_valid ()) ms = user_macro_scope (); return ms; @@ -152,9 +149,7 @@ standard_macro_lookup (const char *name, const macro_scope &ms) return result; } -void _initialize_macroscope (); -void -_initialize_macroscope () +INIT_GDB_FILE (macroscope) { macro_user_macros = new_macro_table (NULL, NULL, NULL); macro_set_main (macro_user_macros, "<user-defined>"); diff --git a/gdb/macroscope.h b/gdb/macroscope.h index de3186d..2cb6a0f 100644 --- a/gdb/macroscope.h +++ b/gdb/macroscope.h @@ -31,21 +31,25 @@ extern struct macro_table *macro_user_macros; in scope: a source file (either a main source file or an #inclusion), and a line number in that file. */ struct macro_scope { - struct macro_source_file *file; - int line; + struct macro_source_file *file = nullptr; + int line = 0; + + /* Return true if this scope is valid. */ + bool is_valid () const + { + return file != nullptr; + } }; /* Return a `struct macro_scope' object corresponding to the symtab and line given in SAL. If we have no macro information for that - location, or if SAL's pc is zero, return zero. */ -gdb::unique_xmalloc_ptr<struct macro_scope> sal_macro_scope - (struct symtab_and_line sal); - + location, or if SAL's pc is zero, return an invalid scope. */ +macro_scope sal_macro_scope (struct symtab_and_line sal); /* Return a `struct macro_scope' object representing just the user-defined macros. */ -gdb::unique_xmalloc_ptr<struct macro_scope> user_macro_scope (void); +macro_scope user_macro_scope (); /* Return a `struct macro_scope' object describing the scope the `macro expand' and `macro expand-once' commands should use for looking up @@ -54,7 +58,7 @@ gdb::unique_xmalloc_ptr<struct macro_scope> user_macro_scope (void); If we have no macro information for the current location, return the user macro scope. */ -gdb::unique_xmalloc_ptr<struct macro_scope> default_macro_scope (void); +macro_scope default_macro_scope (); /* Look up the definition of the macro named NAME in scope at the source location given by MS. */ @@ -19,6 +19,7 @@ #include "annotate.h" #include "exceptions.h" +#include "gdbsupport/common-inferior.h" #include "top.h" #include "ui.h" #include "target.h" @@ -399,7 +400,7 @@ start_event_loop () try { - result = gdb_do_one_event (); + result = current_interpreter ()->do_one_event (); } catch (const gdb_exception_forced_quit &ex) { @@ -420,6 +421,7 @@ start_event_loop () get around to resetting the prompt, which leaves readline in a messed-up state. Reset it here. */ current_ui->prompt_state = PROMPT_NEEDED; + current_ui->line_buffer.clear (); top_level_interpreter ()->on_command_error (); /* This call looks bizarre, but it is required. If the user entered a command that caused an error, @@ -1329,10 +1331,8 @@ captured_main_1 (struct captured_main_args *context) } static void -captured_main (void *data) +captured_main (captured_main_args *context) { - struct captured_main_args *context = (struct captured_main_args *) data; - captured_main_1 (context); /* NOTE: cagney/1999-11-07: There is probably no reason for not diff --git a/gdb/maint-test-options.c b/gdb/maint-test-options.c index 25f609b..97236c9 100644 --- a/gdb/maint-test-options.c +++ b/gdb/maint-test-options.c @@ -429,9 +429,7 @@ maintenance_test_options_unknown_is_operand_command_completer static cmd_list_element *maintenance_test_options_list; -void _initialize_maint_test_options (); -void -_initialize_maint_test_options () +INIT_GDB_FILE (maint_test_options) { cmd_list_element *cmd; diff --git a/gdb/maint-test-settings.c b/gdb/maint-test-settings.c index 663190a..c7b12c6 100644 --- a/gdb/maint-test-settings.c +++ b/gdb/maint-test-settings.c @@ -78,9 +78,7 @@ maintenance_show_test_settings_value_cmd } -void _initialize_maint_test_settings (); -void -_initialize_maint_test_settings () +INIT_GDB_FILE (maint_test_settings) { maintenance_test_settings_filename = "/foo/bar"; diff --git a/gdb/maint.c b/gdb/maint.c index c6f9b32..78dea22 100644 --- a/gdb/maint.c +++ b/gdb/maint.c @@ -920,9 +920,9 @@ maintenance_show_worker_threads (struct ui_file *file, int from_tty, } -/* If true, display time usage both at startup and for each command. */ +/* See maint.h. */ -static bool per_command_time; +bool per_command_time; /* If true, display space usage both at startup and for each command. */ @@ -1151,10 +1151,32 @@ set_per_command_cmd (const char *args, int from_tty) } } +/* Handle "mt set per-command time". Warn if per-thread run time + information is not possible. */ + +static void +maintenance_set_command_time_cmd (const char *args, int from_tty, + cmd_list_element *c) +{ + /* No point warning if this platform can't use multiple threads at + all. */ +#if CXX_STD_THREAD + static bool already_warned = false; + if (per_command_time + && !get_run_time_thread_scope_available () + && !already_warned) + { + warning (_("\ +per-thread run time information not available on this platform")); + already_warned = true; + } +#endif +} + /* See maint.h. */ -scoped_time_it::scoped_time_it (const char *what) - : m_enabled (per_command_time), +scoped_time_it::scoped_time_it (const char *what, bool enabled) + : m_enabled (enabled), m_what (what), m_start_wall (m_enabled ? std::chrono::steady_clock::now () @@ -1279,9 +1301,7 @@ Selftests have been disabled for this build.\n")); } -void _initialize_maint_cmds (); -void -_initialize_maint_cmds () +INIT_GDB_FILE (maint_cmds) { struct cmd_list_element *cmd; @@ -1423,7 +1443,7 @@ Show whether to display per-command execution time."), _("\ If enabled, the execution time for each command will be\n\ displayed following the command's output."), - NULL, NULL, + maintenance_set_command_time_cmd, NULL, &per_command_setlist, &per_command_showlist); add_setshow_boolean_cmd ("space", class_maintenance, diff --git a/gdb/maint.h b/gdb/maint.h index 28e6280..6930018 100644 --- a/gdb/maint.h +++ b/gdb/maint.h @@ -61,7 +61,9 @@ class scoped_command_stats bool m_symtab_enabled : 1; run_time_clock::time_point m_start_cpu_time; std::chrono::steady_clock::time_point m_start_wall_time; +#ifdef HAVE_USEFUL_SBRK long m_start_space; +#endif /* Total number of symtabs (over all objfiles). */ int m_start_nr_symtabs; /* A count of the compunits. */ @@ -70,13 +72,17 @@ class scoped_command_stats int m_start_nr_blocks; }; +/* If true, display time usage both at startup and for each command. */ + +extern bool per_command_time; + /* RAII structure used to measure the time spent by the current thread in a given scope. */ struct scoped_time_it { /* WHAT is the prefix to show when the summary line is printed. */ - scoped_time_it (const char *what); + scoped_time_it (const char *what, bool enabled = per_command_time); DISABLE_COPY_AND_ASSIGN (scoped_time_it); ~scoped_time_it (); diff --git a/gdb/make-init-c b/gdb/make-init-c index 4f0185c..6834b43 100755 --- a/gdb/make-init-c +++ b/gdb/make-init-c @@ -25,12 +25,13 @@ # # Where SOURCE-FILES is the list of source files to extract init functions from. # -# Formatting conventions: The name of the initialization routines must begin -# with `_initialize_`, must start in column zero, and be followed with exactly -# ` ()`. For example: + +# An initialization function is introduced using the "INIT_GDB_FILE" +# macro. In ordinary code this expands to a function declaration (to +# avoid a warning) and then the start of a definition. In the +# generated init.c, though, it is expanded differently. For example: # -# void -# _initialize_foo () +# INIT_GDB_FILE (foo) # { # ... # } @@ -43,19 +44,21 @@ echo "/* Do not modify this file. */" echo "/* It is created automatically by the Makefile. */" echo "#include <algorithm>" echo "" -sed -n -e 's/^\(_initialize_[a-zA-Z0-9_]*\) ()$/\1/p' "$@" | while read -r name; do - echo "extern initialize_file_ftype $name;" -done +echo "#undef INIT_GDB_FILE" +echo "#define INIT_GDB_FILE(NAME) extern void _initialize_ ## NAME ();" +grep -h '^[ ]*INIT_GDB_FILE\b' "$@" echo "" echo "void initialize_all_files ();" echo "void" echo "initialize_all_files ()" echo "{" +echo " typedef void initialize_file_ftype (void);" +echo "" echo " std::vector<initialize_file_ftype *> functions =" echo " {" -sed -n -e 's/^\(_initialize_[a-zA-Z0-9_]*\) ()$/\1/p' "$@" | while read -r name; do - echo " $name," -done +echo "#undef INIT_GDB_FILE" +echo "#define INIT_GDB_FILE(NAME) _initialize_ ## NAME," +grep -h '^[ ]*INIT_GDB_FILE\b' "$@" echo " };" echo "" echo " /* If GDB_REVERSE_INIT_FUNCTIONS is set (any value), reverse the" diff --git a/gdb/mdebugread.c b/gdb/mdebugread.c index 72af117..a7d26c3 100644 --- a/gdb/mdebugread.c +++ b/gdb/mdebugread.c @@ -248,7 +248,7 @@ static struct type *parse_type (int, union aux_ext *, unsigned int, int *, int, const char *); static struct symbol *mylookup_symbol (const char *, const struct block *, - domain_enum, enum address_class); + domain_enum, location_class); static void sort_blocks (struct symtab *); @@ -329,7 +329,7 @@ fdr_name (FDR *f) /* Read in and parse the symtab of the file OBJFILE. Symbols from different sections are relocated via the SECTION_OFFSETS. */ -void +static void mdebug_build_psymtabs (minimal_symbol_reader &reader, struct objfile *objfile, const struct ecoff_debug_swap *swap, @@ -550,7 +550,7 @@ static const struct symbol_register_ops mdebug_register_funcs = { mdebug_reg_to_regnum }; -/* The "aclass" indices for computed symbols. */ +/* The "loc_class" indices for computed symbols. */ static int mdebug_register_index; static int mdebug_regparm_index; @@ -559,11 +559,11 @@ static int mdebug_regparm_index; static void add_data_symbol (SYMR *sh, union aux_ext *ax, int bigend, - struct symbol *s, int aclass_index, struct block *b, + struct symbol *s, int loc_class_index, struct block *b, struct objfile *objfile, const char *name) { s->set_domain (VAR_DOMAIN); - s->set_aclass_index (aclass_index); + s->set_loc_class_index (loc_class_index); add_symbol (s, top_stack->cur_st, b); /* Type could be missing if file is compiled without debugging info. */ @@ -688,19 +688,19 @@ parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend, { case scRegister: /* Pass by value in register. */ - s->set_aclass_index (mdebug_register_index); + s->set_loc_class_index (mdebug_register_index); break; case scVar: /* Pass by reference on stack. */ - s->set_aclass_index (LOC_REF_ARG); + s->set_loc_class_index (LOC_REF_ARG); break; case scVarRegister: /* Pass by reference in register. */ - s->set_aclass_index (mdebug_regparm_index); + s->set_loc_class_index (mdebug_regparm_index); break; default: /* Pass by value on stack. */ - s->set_aclass_index (LOC_ARG); + s->set_loc_class_index (LOC_ARG); break; } s->set_value_longest (svalue); @@ -711,7 +711,7 @@ parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend, case stLabel: /* label, goes into current block. */ s = new_symbol (name); s->set_domain (LABEL_DOMAIN); /* So that it can be used */ - s->set_aclass_index (LOC_LABEL); /* but not misused. */ + s->set_loc_class_index (LOC_LABEL); /* but not misused. */ s->set_section_index (section_index); s->set_value_address (sh->value); s->set_type (builtin_type (objfile)->builtin_int); @@ -753,7 +753,7 @@ parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend, } s = new_symbol (name); s->set_domain (FUNCTION_DOMAIN); - s->set_aclass_index (LOC_BLOCK); + s->set_loc_class_index (LOC_BLOCK); s->set_section_index (section_index); /* Type of the return value. */ if (SC_IS_UNDEF (sh->sc) || sh->sc == scNil) @@ -1034,7 +1034,7 @@ parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend, t->set_code (type_code); t->set_length (sh->value); t->alloc_fields (nfields); - f = t->fields(); + f = t->fields ().data (); if (type_code == TYPE_CODE_ENUM) { @@ -1074,7 +1074,7 @@ parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend, enum_sym->set_linkage_name (obstack_strdup (&mdebugread_objfile->objfile_obstack, f->name ())); - enum_sym->set_aclass_index (LOC_CONST); + enum_sym->set_loc_class_index (LOC_CONST); enum_sym->set_type (t); enum_sym->set_domain (VAR_DOMAIN); enum_sym->set_value_longest (tsym.value); @@ -1107,7 +1107,7 @@ parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend, s = new_symbol (name); s->set_domain (STRUCT_DOMAIN); - s->set_aclass_index (LOC_TYPEDEF); + s->set_loc_class_index (LOC_TYPEDEF); s->set_value_longest (0); s->set_type (t); add_symbol (s, top_stack->cur_st, top_stack->cur_block); @@ -1164,7 +1164,7 @@ parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend, /* Make up special symbol to contain procedure specific info. */ s = new_symbol (MDEBUG_EFI_SYMBOL_NAME); s->set_domain (LABEL_DOMAIN); - s->set_aclass_index (LOC_CONST); + s->set_loc_class_index (LOC_CONST); s->set_type (builtin_type (mdebugread_objfile)->builtin_void); e = OBSTACK_ZALLOC (&mdebugread_objfile->objfile_obstack, mdebug_extra_func_info); @@ -1297,7 +1297,7 @@ parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend, break; s = new_symbol (name); s->set_domain (TYPE_DOMAIN); - s->set_aclass_index (LOC_TYPEDEF); + s->set_loc_class_index (LOC_TYPEDEF); s->set_value_block (top_stack->cur_block); s->set_type (t); add_symbol (s, top_stack->cur_st, top_stack->cur_block); @@ -3369,7 +3369,7 @@ parse_partial_symbols (minimal_symbol_reader &reader, for (cur_sdx = 0; cur_sdx < fh->csym;) { char *sym_name; - enum address_class theclass; + location_class loc_class; unrelocated_addr minsym_value; int section = -1; @@ -3526,7 +3526,7 @@ parse_partial_symbols (minimal_symbol_reader &reader, reader.record_with_info (sym_name, minsym_value, mst_file_bss, SECT_OFF_BSS (objfile)); - theclass = LOC_STATIC; + loc_class = LOC_STATIC; break; case stIndirect: /* Irix5 forward declaration */ @@ -3538,11 +3538,11 @@ parse_partial_symbols (minimal_symbol_reader &reader, structs from alpha and mips cc. */ if (sh.iss == 0 || has_opaque_xref (fh, &sh)) goto skip; - theclass = LOC_TYPEDEF; + loc_class = LOC_TYPEDEF; break; case stConstant: /* Constant decl */ - theclass = LOC_CONST; + loc_class = LOC_CONST; break; case stUnion: @@ -3600,7 +3600,7 @@ parse_partial_symbols (minimal_symbol_reader &reader, } /* Use this gdb symbol. */ pst->add_psymbol (sym_name, true, - VAR_DOMAIN, theclass, section, + VAR_DOMAIN, loc_class, section, psymbol_placement::STATIC, unrelocated_addr (sh.value), psymtab_language, @@ -3616,7 +3616,7 @@ parse_partial_symbols (minimal_symbol_reader &reader, PST_PRIVATE (save_pst)->extern_tab = ext_ptr; for (; --cur_sdx >= 0; ext_ptr++) { - enum address_class theclass; + location_class loc_class; SYMR *psh; CORE_ADDR svalue; int section; @@ -3663,7 +3663,7 @@ parse_partial_symbols (minimal_symbol_reader &reader, Ignore them, as parse_external will ignore them too. */ continue; case stLabel: - theclass = LOC_LABEL; + loc_class = LOC_LABEL; break; default: unknown_ext_complaint (debug_info->ssext + psh->iss); @@ -3675,12 +3675,12 @@ parse_partial_symbols (minimal_symbol_reader &reader, if (SC_IS_COMMON (psh->sc)) continue; - theclass = LOC_STATIC; + loc_class = LOC_STATIC; break; } char *sym_name = debug_info->ssext + psh->iss; pst->add_psymbol (sym_name, true, - VAR_DOMAIN, theclass, + VAR_DOMAIN, loc_class, section, psymbol_placement::GLOBAL, unrelocated_addr (svalue), @@ -3991,7 +3991,7 @@ mdebug_expand_psymtab (legacy_psymtab *pst, struct objfile *objfile) struct symbol *s = new_symbol (MDEBUG_EFI_SYMBOL_NAME); s->set_domain (LABEL_DOMAIN); - s->set_aclass_index (LOC_CONST); + s->set_loc_class_index (LOC_CONST); s->set_type (builtin_type (objfile)->builtin_void); s->set_value_bytes ((gdb_byte *) e); e->pdr.framereg = -1; @@ -4464,7 +4464,7 @@ cross_ref (int fd, union aux_ext *ax, struct type **tpp, static struct symbol * mylookup_symbol (const char *name, const struct block *block, - domain_enum domain, enum address_class theclass) + domain_enum domain, location_class loc_class) { int inc; @@ -4473,14 +4473,14 @@ mylookup_symbol (const char *name, const struct block *block, { if (sym->linkage_name ()[0] == inc && sym->domain () == domain - && sym->aclass () == theclass + && sym->loc_class () == loc_class && strcmp (sym->linkage_name (), name) == 0) return sym; } block = block->superblock (); if (block) - return mylookup_symbol (name, block, domain, theclass); + return mylookup_symbol (name, block, domain, loc_class); return 0; } @@ -4792,9 +4792,28 @@ elfmdebug_build_psymtabs (struct objfile *objfile, reader.install (); } -void _initialize_mdebugread (); +/* see mdebugread.h. */ + void -_initialize_mdebugread () +mipsmdebug_build_psymtabs (struct objfile *objfile, + const struct ecoff_debug_swap *swap, + struct ecoff_debug_info *info) +{ + bfd *abfd = objfile->obfd.get (); + + minimal_symbol_reader reader (objfile); + + if (!(*swap->read_debug_info) (abfd, nullptr, + info)) + error (_("Error reading ECOFF debugging information: %s"), + bfd_errmsg (bfd_get_error ())); + + mdebug_build_psymtabs (reader, objfile, swap, info); + + reader.install (); +} + +INIT_GDB_FILE (mdebugread) { mdebug_register_index = register_symbol_register_impl (LOC_REGISTER, &mdebug_register_funcs); diff --git a/gdb/mdebugread.h b/gdb/mdebugread.h index be26f46..f7e9f98 100644 --- a/gdb/mdebugread.h +++ b/gdb/mdebugread.h @@ -37,13 +37,38 @@ struct mdebug_extra_func_info #define MDEBUG_EFI_SYMBOL_NAME "__GDB_EFI_INFO__" -extern void mdebug_build_psymtabs (minimal_symbol_reader &, - struct objfile *, - const struct ecoff_debug_swap *, - struct ecoff_debug_info *); +#if defined(MDEBUG_FORMAT_AVAILABLE) extern void elfmdebug_build_psymtabs (struct objfile *, const struct ecoff_debug_swap *, asection *); +/* Read ECOFF debugging information from a BFD section. This is + called from mipsread.c. It parses the section into a + ecoff_debug_info struct, and then lets the rest of the file handle + it as normal. */ +extern void mipsmdebug_build_psymtabs (struct objfile *, + const struct ecoff_debug_swap *, + struct ecoff_debug_info *); + +#else /* MDEBUG_FORMAT_AVAILABLE */ + +static inline void +elfmdebug_build_psymtabs (struct objfile *, + const struct ecoff_debug_swap *, + asection *) +{ + warning (_("No mdebug support available")); +} + +static inline void +mipsmdebug_build_psymtabs (struct objfile *, + const struct ecoff_debug_swap *, + struct ecoff_debug_info *) +{ + warning (_("No mdebug support available")); +} + +#endif /* MDEBUG_FORMAT_AVAILABLE */ + #endif /* GDB_MDEBUGREAD_H */ diff --git a/gdb/memattr.c b/gdb/memattr.c index 81d0de0..9d26d31 100644 --- a/gdb/memattr.c +++ b/gdb/memattr.c @@ -592,9 +592,7 @@ delete_mem_command (const char *args, int from_tty) static struct cmd_list_element *mem_set_cmdlist; static struct cmd_list_element *mem_show_cmdlist; -void _initialize_mem (); -void -_initialize_mem () +INIT_GDB_FILE (mem) { add_com ("mem", class_vars, mem_command, _("\ Define or reset attributes for memory regions.\n\ diff --git a/gdb/mep-tdep.c b/gdb/mep-tdep.c index 60bae3a..30a6018 100644 --- a/gdb/mep-tdep.c +++ b/gdb/mep-tdep.c @@ -2459,9 +2459,7 @@ mep_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_mep_tdep (); -void -_initialize_mep_tdep () +INIT_GDB_FILE (mep_tdep) { mep_csr_reggroup = reggroup_new ("csr", USER_REGGROUP); mep_cr_reggroup = reggroup_new ("cr", USER_REGGROUP); diff --git a/gdb/mi/mi-cmd-env.c b/gdb/mi/mi-cmd-env.c index e79af9c..bc2fe77 100644 --- a/gdb/mi/mi-cmd-env.c +++ b/gdb/mi/mi-cmd-env.c @@ -236,9 +236,7 @@ mi_cmd_inferior_tty_show (const char *command, const char *const *argv, current_uiout->field_string ("inferior_tty_terminal", inferior_tty); } -void _initialize_mi_cmd_env (); -void -_initialize_mi_cmd_env () +INIT_GDB_FILE (mi_cmd_env) { const char *env; diff --git a/gdb/mi/mi-cmd-file.c b/gdb/mi/mi-cmd-file.c index 2354012..cf7991f 100644 --- a/gdb/mi/mi-cmd-file.c +++ b/gdb/mi/mi-cmd-file.c @@ -25,7 +25,6 @@ #include "symtab.h" #include "source.h" #include "solib.h" -#include "solist.h" /* Return to the client the absolute path and line number of the current file being executed. */ @@ -163,10 +162,10 @@ mi_cmd_file_list_shared_libraries (const char *command, for (const solib &so : current_program_space->solibs ()) { - if (so.so_name.empty ()) + if (so.name.empty ()) continue; - if (pattern != nullptr && !re_exec (so.so_name.c_str ())) + if (pattern != nullptr && !re_exec (so.name.c_str ())) continue; ui_out_emit_tuple tuple_emitter (uiout, NULL); diff --git a/gdb/mi/mi-cmd-stack.c b/gdb/mi/mi-cmd-stack.c index cc26747..d4a2499 100644 --- a/gdb/mi/mi-cmd-stack.c +++ b/gdb/mi/mi-cmd-stack.c @@ -604,7 +604,7 @@ list_args_or_locals (const frame_print_options &fp_opts, { int print_me = 0; - switch (sym->aclass ()) + switch (sym->loc_class ()) { default: case LOC_UNDEF: /* catches errors */ diff --git a/gdb/mi/mi-cmds.c b/gdb/mi/mi-cmds.c index 53cdcc9..abd3fb9 100644 --- a/gdb/mi/mi-cmds.c +++ b/gdb/mi/mi-cmds.c @@ -369,9 +369,7 @@ mi_cmd_lookup (const char *command) return it->second.get (); } -void _initialize_mi_cmds (); -void -_initialize_mi_cmds () +INIT_GDB_FILE (mi_cmds) { add_builtin_mi_commands (); } diff --git a/gdb/mi/mi-interp.c b/gdb/mi/mi-interp.c index ae1070e..8373e1a 100644 --- a/gdb/mi/mi-interp.c +++ b/gdb/mi/mi-interp.c @@ -34,7 +34,7 @@ #include "mi-common.h" #include "observable.h" #include "gdbthread.h" -#include "solist.h" +#include "solib.h" #include "objfiles.h" #include "tracepoint.h" #include "cli-out.h" @@ -726,9 +726,9 @@ mi_output_solib_attribs_1 (ui_out *uiout, const solib &solib, { gdbarch *gdbarch = current_inferior ()->arch (); - uiout->field_string ("id", solib.so_original_name); - uiout->field_string ("target-name", solib.so_original_name); - uiout->field_string ("host-name", solib.so_name); + uiout->field_string ("id", solib.original_name); + uiout->field_string ("target-name", solib.original_name); + uiout->field_string ("host-name", solib.name); if (include_symbols_loaded_p) uiout->field_signed ("symbols-loaded", solib.symbols_loaded); if (!gdbarch_has_global_solist (current_inferior ()->arch ())) @@ -935,9 +935,7 @@ mi_interp_factory (const char *name) return new mi_interp (name); } -void _initialize_mi_interp (); -void -_initialize_mi_interp () +INIT_GDB_FILE (mi_interp) { /* The various interpreter levels. */ interp_factory_register (INTERP_MI2, mi_interp_factory); diff --git a/gdb/mi/mi-main.c b/gdb/mi/mi-main.c index cda72ca..789e6fa 100644 --- a/gdb/mi/mi-main.c +++ b/gdb/mi/mi-main.c @@ -2768,9 +2768,7 @@ mi_parse_thread_group_id (const char *id) return (int) num; } -void _initialize_mi_main (); -void -_initialize_mi_main () +INIT_GDB_FILE (mi_main) { set_show_commands mi_async_cmds = add_setshow_boolean_cmd ("mi-async", class_run, diff --git a/gdb/microblaze-linux-tdep.c b/gdb/microblaze-linux-tdep.c index 8dcbeaa..0fdda18 100644 --- a/gdb/microblaze-linux-tdep.c +++ b/gdb/microblaze-linux-tdep.c @@ -35,6 +35,7 @@ #include "frame-unwind.h" #include "tramp-frame.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" static int microblaze_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, @@ -125,17 +126,14 @@ microblaze_linux_init_abi (struct gdbarch_info info, microblaze_linux_memory_remove_breakpoint); /* Shared library handling. */ - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); /* Trampolines. */ tramp_frame_prepend_unwinder (gdbarch, µblaze_linux_sighandler_tramp_frame); } -void _initialize_microblaze_linux_tdep (); -void -_initialize_microblaze_linux_tdep () +INIT_GDB_FILE (microblaze_linux_tdep) { gdbarch_register_osabi (bfd_arch_microblaze, 0, GDB_OSABI_LINUX, microblaze_linux_init_abi); diff --git a/gdb/microblaze-tdep.c b/gdb/microblaze-tdep.c index bc728b6..7b58220 100644 --- a/gdb/microblaze-tdep.c +++ b/gdb/microblaze-tdep.c @@ -736,9 +736,7 @@ microblaze_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_microblaze_tdep (); -void -_initialize_microblaze_tdep () +INIT_GDB_FILE (microblaze_tdep) { gdbarch_register (bfd_arch_microblaze, microblaze_gdbarch_init); diff --git a/gdb/mingw-hdep.c b/gdb/mingw-hdep.c index 84a7b9f..a4e9cf5 100644 --- a/gdb/mingw-hdep.c +++ b/gdb/mingw-hdep.c @@ -23,6 +23,8 @@ #include "gdbsupport/gdb_select.h" #include "inferior.h" #include "cli/cli-style.h" +#include "command.h" +#include "cli/cli-cmds.h" #include <windows.h> #include <signal.h> @@ -445,3 +447,62 @@ install_sigint_handler (c_c_handler_ftype *fn) current_handler = fn; return result; } + +/* Set stdout and stderr handles to translation mode MODE. */ + +static void +set_console_translation_mode (int mode) +{ + setmode (fileno (stdout), mode); + setmode (fileno (stderr), mode); +} + +/* Arg in "maint set console-translation-mode <arg>. */ + +static std::string maint_console_translation_mode; + +/* Current value of "maint set/show console-translation-mode". */ + +static std::string console_translation_mode = "unknown"; + +/* Sets the console translation mode. */ + +static void +set_maint_console_translation_mode (const char *args, int from_tty, + struct cmd_list_element *c) +{ + if (maint_console_translation_mode == "binary") + set_console_translation_mode (O_BINARY); + else if (maint_console_translation_mode == "text") + set_console_translation_mode (O_TEXT); + else + error (_("Invalid console translation mode: %s"), + maint_console_translation_mode.c_str ()); + + console_translation_mode = maint_console_translation_mode; +} + +/* Shows the console translation mode. */ + +static void +show_maint_console_translation_mode (struct ui_file *file, int from_tty, + struct cmd_list_element *c, + const char *value) +{ + gdb_printf (file, _("Console translation mode is %s.\n"), + console_translation_mode.c_str ()); +} + +INIT_GDB_FILE (mingw_hdep) +{ + add_setshow_string_cmd ("console-translation-mode", + class_maintenance, + &maint_console_translation_mode, _("\ +Set the translation mode of stdout/stderr."), _("\ +Show the translation mode of stdout/stderr."), _("\ +Use \"binary\", or \"text\""), + set_maint_console_translation_mode, + show_maint_console_translation_mode, + &maintenance_set_cmdlist, + &maintenance_show_cmdlist); +} diff --git a/gdb/minsyms.c b/gdb/minsyms.c index 124d96d..4a6459a 100644 --- a/gdb/minsyms.c +++ b/gdb/minsyms.c @@ -1479,7 +1479,7 @@ minimal_symbol_reader::install () msymbols = m_objfile->per_bfd->msymbols.get (); /* Arbitrarily require at least 10 elements in a thread. */ - gdb::parallel_for_each (10, &msymbols[0], &msymbols[mcount], + gdb::parallel_for_each<10> (&msymbols[0], &msymbols[mcount], [&] (minimal_symbol *start, minimal_symbol *end) { scoped_time_it time_it ("minsyms install worker"); diff --git a/gdb/mips-fbsd-nat.c b/gdb/mips-fbsd-nat.c index 667a4bc..8d97849 100644 --- a/gdb/mips-fbsd-nat.c +++ b/gdb/mips-fbsd-nat.c @@ -125,9 +125,7 @@ mips_fbsd_nat_target::store_registers (struct regcache *regcache, int regnum) } } -void _initialize_mips_fbsd_nat (); -void -_initialize_mips_fbsd_nat () +INIT_GDB_FILE (mips_fbsd_nat) { add_inf_child_target (&the_mips_fbsd_nat_target); } diff --git a/gdb/mips-fbsd-tdep.c b/gdb/mips-fbsd-tdep.c index c280527..879058c 100644 --- a/gdb/mips-fbsd-tdep.c +++ b/gdb/mips-fbsd-tdep.c @@ -476,12 +476,28 @@ mips_fbsd_skip_solib_resolver (struct gdbarch *gdbarch, CORE_ADDR pc) return fbsd_skip_solib_resolver (gdbarch, pc); } -/* FreeBSD/mips uses a slightly different `struct link_map' than the - other FreeBSD platforms as it includes an additional `l_off' - member. */ +/* solib_ops for ILP32 FreeBSD/MIPS systems. */ -static struct link_map_offsets * -mips_fbsd_ilp32_fetch_link_map_offsets (void) +struct mips_fbsd_ilp32_solib_ops : public svr4_solib_ops +{ + /* FreeBSD/MIPS uses a slightly different `struct link_map' than the + other FreeBSD platforms as it includes an additional `l_off' member. */ + + link_map_offsets *fetch_link_map_offsets () const override; +}; + +/* Return a new solib_ops for ILP32 FreeBSD/MIPS systems. */ + +static solib_ops_up +make_mips_fbsd_ilp32_solib_ops () +{ + return std::make_unique<mips_fbsd_ilp32_solib_ops> (); +} + +/* See mips_fbsd_ilp32_solib_ops. */ + +link_map_offsets * +mips_fbsd_ilp32_solib_ops::fetch_link_map_offsets () const { static struct link_map_offsets lmo; static struct link_map_offsets *lmp = NULL; @@ -508,8 +524,28 @@ mips_fbsd_ilp32_fetch_link_map_offsets (void) return lmp; } -static struct link_map_offsets * -mips_fbsd_lp64_fetch_link_map_offsets (void) +/* solib_ops for LP64 FreeBSD/MIPS systems. */ + +struct mips_fbsd_lp64_solib_ops : public svr4_solib_ops +{ + /* FreeBSD/MIPS uses a slightly different `struct link_map' than the + other FreeBSD platforms as it includes an additional `l_off' member. */ + + link_map_offsets *fetch_link_map_offsets () const override; +}; + +/* Return a new solib_ops for LP64 FreeBSD/MIPS systems. */ + +static solib_ops_up +make_mips_fbsd_lp64_solib_ops () +{ + return std::make_unique<mips_fbsd_lp64_solib_ops> (); +} + +/* See mips_fbsd_lp64_solib_ops. */ + +link_map_offsets * +mips_fbsd_lp64_solib_ops::fetch_link_map_offsets () const { static struct link_map_offsets lmo; static struct link_map_offsets *lmp = NULL; @@ -544,7 +580,7 @@ mips_fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Generic FreeBSD support. */ fbsd_init_abi (info, gdbarch); - set_gdbarch_software_single_step (gdbarch, mips_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, mips_software_single_step); switch (abi) { @@ -565,15 +601,12 @@ mips_fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_skip_solib_resolver (gdbarch, mips_fbsd_skip_solib_resolver); /* FreeBSD/mips has SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, (gdbarch_ptr_bit (gdbarch) == 32 ? - mips_fbsd_ilp32_fetch_link_map_offsets : - mips_fbsd_lp64_fetch_link_map_offsets)); + set_solib_svr4_ops (gdbarch, (gdbarch_ptr_bit (gdbarch) == 32 + ? make_mips_fbsd_ilp32_solib_ops + : make_mips_fbsd_lp64_solib_ops)); } -void _initialize_mips_fbsd_tdep (); -void -_initialize_mips_fbsd_tdep () +INIT_GDB_FILE (mips_fbsd_tdep) { gdbarch_register_osabi (bfd_arch_mips, 0, GDB_OSABI_FREEBSD, mips_fbsd_init_abi); diff --git a/gdb/mips-linux-nat.c b/gdb/mips-linux-nat.c index b4b5788..e22e904 100644 --- a/gdb/mips-linux-nat.c +++ b/gdb/mips-linux-nat.c @@ -784,9 +784,7 @@ mips_linux_nat_target::close () linux_nat_trad_target::close (); } -void _initialize_mips_linux_nat (); -void -_initialize_mips_linux_nat () +INIT_GDB_FILE (mips_linux_nat) { add_setshow_boolean_cmd ("show-debug-regs", class_maintenance, &show_debug_regs, _("\ diff --git a/gdb/mips-linux-tdep.c b/gdb/mips-linux-tdep.c index 418892b..08dbd68 100644 --- a/gdb/mips-linux-tdep.c +++ b/gdb/mips-linux-tdep.c @@ -30,13 +30,13 @@ #include "gdbtypes.h" #include "objfiles.h" #include "solib.h" -#include "solist.h" #include "symtab.h" #include "target-descriptions.h" #include "regset.h" #include "mips-linux-tdep.h" #include "glibc-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "xml-syscall.h" #include "gdbsupport/gdb_signals.h" #include "inferior.h" @@ -46,8 +46,6 @@ #include "features/mips64-linux.c" #include "features/mips64-dsp-linux.c" -static solib_ops mips_svr4_so_ops; - /* This enum represents the signals' numbers on the MIPS architecture. It just contains the signal definitions which are different from the generic implementation. @@ -667,24 +665,57 @@ mips_linux_in_dynsym_stub (CORE_ADDR pc) return 1; } -/* Return non-zero iff PC belongs to the dynamic linker resolution - code, a PLT entry, or a lazy binding stub. */ +/* Mix-in class to add Linux/MIPS-specific methods to a base solib_ops + class. */ -static int -mips_linux_in_dynsym_resolve_code (CORE_ADDR pc) +template <typename Base> +struct mips_linux_svr4_solib_ops : public Base +{ + bool in_dynsym_resolve_code (CORE_ADDR pc) const override; +}; + +template <typename Base> +bool +mips_linux_svr4_solib_ops<Base>::in_dynsym_resolve_code (CORE_ADDR pc) const { /* Check whether PC is in the dynamic linker. This also checks whether it is in the .plt section, used by non-PIC executables. */ - if (svr4_in_dynsym_resolve_code (pc)) - return 1; + if (Base::in_dynsym_resolve_code (pc)) + return true; /* Likewise for the stubs. They live in the .MIPS.stubs section these days, so we check if the PC is within, than fall back to a pattern match. */ if (mips_linux_in_dynsym_stub (pc)) - return 1; + return true; - return 0; + return false; +} + +/* solib_ops for ILP32 Linux/MIPS systems. */ + +using mips_linux_ilp32_svr4_solib_ops + = mips_linux_svr4_solib_ops<linux_ilp32_svr4_solib_ops>; + +/* Return a new solib_ops for ILP32 Linux/MIPS systems. */ + +static solib_ops_up +make_mips_linux_ilp32_svr4_solib_ops () +{ + return std::make_unique<mips_linux_ilp32_svr4_solib_ops> (); +} + +/* solib_ops for LP64 Linux/MIPS systems. */ + +using mips_linux_lp64_svr4_solib_ops + = mips_linux_svr4_solib_ops<linux_lp64_svr4_solib_ops>; + +/* Return a new solib_ops for LP64 Linux/MIPS systems. */ + +static solib_ops_up +make_mips_linux_lp64_svr4_solib_ops () +{ + return std::make_unique<mips_linux_lp64_svr4_solib_ops> (); } /* See the comments for SKIP_SOLIB_RESOLVER at the top of infrun.c, @@ -1538,8 +1569,7 @@ mips_linux_init_abi (struct gdbarch_info info, case MIPS_ABI_O32: set_gdbarch_get_longjmp_target (gdbarch, mips_linux_get_longjmp_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_mips_linux_ilp32_svr4_solib_ops); tramp_frame_prepend_unwinder (gdbarch, µmips_linux_o32_sigframe); tramp_frame_prepend_unwinder (gdbarch, µmips_linux_o32_rt_sigframe); @@ -1550,8 +1580,7 @@ mips_linux_init_abi (struct gdbarch_info info, case MIPS_ABI_N32: set_gdbarch_get_longjmp_target (gdbarch, mips_linux_get_longjmp_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_mips_linux_ilp32_svr4_solib_ops); set_gdbarch_long_double_bit (gdbarch, 128); set_gdbarch_long_double_format (gdbarch, floatformats_ieee_quad); tramp_frame_prepend_unwinder (gdbarch, @@ -1562,8 +1591,7 @@ mips_linux_init_abi (struct gdbarch_info info, case MIPS_ABI_N64: set_gdbarch_get_longjmp_target (gdbarch, mips64_linux_get_longjmp_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_mips_linux_lp64_svr4_solib_ops); set_gdbarch_long_double_bit (gdbarch, 128); set_gdbarch_long_double_format (gdbarch, floatformats_ieee_quad); tramp_frame_prepend_unwinder (gdbarch, @@ -1577,22 +1605,12 @@ mips_linux_init_abi (struct gdbarch_info info, set_gdbarch_skip_solib_resolver (gdbarch, mips_linux_skip_resolver); - set_gdbarch_software_single_step (gdbarch, mips_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, mips_software_single_step); /* Enable TLS support. */ set_gdbarch_fetch_tls_load_module_address (gdbarch, svr4_fetch_objfile_link_map); - /* Initialize this lazily, to avoid an initialization order - dependency on solib-svr4.c's _initialize routine. */ - if (mips_svr4_so_ops.in_dynsym_resolve_code == NULL) - { - mips_svr4_so_ops = svr4_so_ops; - mips_svr4_so_ops.in_dynsym_resolve_code - = mips_linux_in_dynsym_resolve_code; - } - set_gdbarch_so_ops (gdbarch, &mips_svr4_so_ops); - set_gdbarch_write_pc (gdbarch, mips_linux_write_pc); set_gdbarch_core_read_description (gdbarch, @@ -1629,9 +1647,7 @@ mips_linux_init_abi (struct gdbarch_info info, } } -void _initialize_mips_linux_tdep (); -void -_initialize_mips_linux_tdep () +INIT_GDB_FILE (mips_linux_tdep) { const struct bfd_arch_info *arch_info; diff --git a/gdb/mips-netbsd-nat.c b/gdb/mips-netbsd-nat.c index 51e3878..91b870b 100644 --- a/gdb/mips-netbsd-nat.c +++ b/gdb/mips-netbsd-nat.c @@ -115,9 +115,7 @@ mips_nbsd_nat_target::store_registers (struct regcache *regcache, int regno) } } -void _initialize_mipsnbsd_nat (); -void -_initialize_mipsnbsd_nat () +INIT_GDB_FILE (mipsnbsd_nat) { add_inf_child_target (&the_mips_nbsd_nat_target); } diff --git a/gdb/mips-netbsd-tdep.c b/gdb/mips-netbsd-tdep.c index c9bdaa6..e72ed7b 100644 --- a/gdb/mips-netbsd-tdep.c +++ b/gdb/mips-netbsd-tdep.c @@ -288,13 +288,27 @@ mipsnbsd_cannot_store_register (struct gdbarch *gdbarch, int regno) || regno == mips_regnum (gdbarch)->fp_implementation_revision); } -/* Shared library support. */ +/* solib_ops for ILP32 NetBSD/MIPS systems. */ -/* NetBSD/mips uses a slightly different `struct link_map' than the - other NetBSD platforms. */ +struct mips_nbsd_ilp32_svr4_solib_ops : public svr4_solib_ops +{ + /* NetBSD/MIPS uses a slightly different `struct link_map' than the + other NetBSD platforms. */ + link_map_offsets *fetch_link_map_offsets () const override; +}; + +/* Return a new solib_ops for ILP32 NetBSD/MIPS systems. */ -static struct link_map_offsets * -mipsnbsd_ilp32_fetch_link_map_offsets (void) +static solib_ops_up +make_mips_nbsd_ilp32_svr4_solib_ops () +{ + return std::make_unique<mips_nbsd_ilp32_svr4_solib_ops> (); +} + +/* See mips_nbsd_ilp32_svr4_solib_ops. */ + +link_map_offsets * +mips_nbsd_ilp32_svr4_solib_ops::fetch_link_map_offsets () const { static struct link_map_offsets lmo; static struct link_map_offsets *lmp = NULL; @@ -322,8 +336,27 @@ mipsnbsd_ilp32_fetch_link_map_offsets (void) return lmp; } -static struct link_map_offsets * -mipsnbsd_lp64_fetch_link_map_offsets (void) +/* solib_ops for LP64 NetBSD/MIPS systems. */ + +struct mips_nbsd_lp64_svr4_solib_ops : public svr4_solib_ops +{ + /* NetBSD/MIPS uses a slightly different `struct link_map' than the + other NetBSD platforms. */ + link_map_offsets *fetch_link_map_offsets () const override; +}; + +/* Return a new solib_ops for LP64 NetBSD/MIPS systems. */ + +static solib_ops_up +make_mips_nbsd_lp64_svr4_solib_ops () +{ + return std::make_unique<mips_nbsd_lp64_svr4_solib_ops> (); +} + +/* See mips_nbsd_lp64_svr4_solib_ops. */ + +link_map_offsets * +mips_nbsd_lp64_svr4_solib_ops::fetch_link_map_offsets () const { static struct link_map_offsets lmo; static struct link_map_offsets *lmp = NULL; @@ -366,18 +399,15 @@ mipsnbsd_init_abi (struct gdbarch_info info, set_gdbarch_cannot_fetch_register (gdbarch, mipsnbsd_cannot_fetch_register); set_gdbarch_cannot_store_register (gdbarch, mipsnbsd_cannot_store_register); - set_gdbarch_software_single_step (gdbarch, mips_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, mips_software_single_step); /* NetBSD/mips has SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, (gdbarch_ptr_bit (gdbarch) == 32 ? - mipsnbsd_ilp32_fetch_link_map_offsets : - mipsnbsd_lp64_fetch_link_map_offsets)); + set_solib_svr4_ops (gdbarch, (gdbarch_ptr_bit (gdbarch) == 32 + ? make_mips_nbsd_ilp32_svr4_solib_ops + : make_mips_nbsd_lp64_svr4_solib_ops)); } -void _initialize_mipsnbsd_tdep (); -void -_initialize_mipsnbsd_tdep () +INIT_GDB_FILE (mipsnbsd_tdep) { gdbarch_register_osabi (bfd_arch_mips, 0, GDB_OSABI_NETBSD, mipsnbsd_init_abi); diff --git a/gdb/mips-sde-tdep.c b/gdb/mips-sde-tdep.c index 1f50ef0..5278afb 100644 --- a/gdb/mips-sde-tdep.c +++ b/gdb/mips-sde-tdep.c @@ -254,9 +254,7 @@ mips_sde_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) frame_base_append_sniffer (gdbarch, mips_sde_frame_base_sniffer); } -void _initialize_mips_sde_tdep (); -void -_initialize_mips_sde_tdep () +INIT_GDB_FILE (mips_sde_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_mips, bfd_target_elf_flavour, diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c index c64cd47..d072b9a 100644 --- a/gdb/mips-tdep.c +++ b/gdb/mips-tdep.c @@ -487,7 +487,7 @@ msymbol_is_micromips (struct minimal_symbol *msym) static void mips_make_symbol_special (struct symbol *sym, struct objfile *objfile) { - if (sym->aclass () == LOC_BLOCK) + if (sym->loc_class () == LOC_BLOCK) { /* We are in symbol reading so it is OK to cast away constness. */ struct block *block = (struct block *) sym->value_block (); @@ -8972,9 +8972,7 @@ mips_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file) mips_fpu_type_str (mips_get_fpu_type (gdbarch))); } -void _initialize_mips_tdep (); -void -_initialize_mips_tdep () +INIT_GDB_FILE (mips_tdep) { static struct cmd_list_element *mipsfpulist = NULL; diff --git a/gdb/mips64-obsd-nat.c b/gdb/mips64-obsd-nat.c index 26fc1b9..d77c77e 100644 --- a/gdb/mips64-obsd-nat.c +++ b/gdb/mips64-obsd-nat.c @@ -114,9 +114,7 @@ mips64_obsd_nat_target::store_registers (struct regcache *regcache, int regnum) perror_with_name (_("Couldn't write registers")); } -void _initialize_mips64obsd_nat (); -void -_initialize_mips64obsd_nat () +INIT_GDB_FILE (mips64obsd_nat) { add_inf_child_target (&the_mips64_obsd_nat_target); } diff --git a/gdb/mips64-obsd-tdep.c b/gdb/mips64-obsd-tdep.c index d0c9a1c..b9a6fe5 100644 --- a/gdb/mips64-obsd-tdep.c +++ b/gdb/mips64-obsd-tdep.c @@ -150,13 +150,10 @@ mips64obsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) obsd_init_abi(info, gdbarch); /* OpenBSD/mips64 has SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); } -void _initialize_mips64obsd_tdep (); -void -_initialize_mips64obsd_tdep () +INIT_GDB_FILE (mips64obsd_tdep) { gdbarch_register_osabi (bfd_arch_mips, 0, GDB_OSABI_OPENBSD, mips64obsd_init_abi); diff --git a/gdb/mipsread.c b/gdb/mipsread.c index 5ffb97f..1d76b8f 100644 --- a/gdb/mipsread.c +++ b/gdb/mipsread.c @@ -66,20 +66,16 @@ mipscoff_symfile_read (struct objfile *objfile, symfile_add_flags symfile_flags) { bfd *abfd = objfile->obfd.get (); - minimal_symbol_reader reader (objfile); - /* Now that the executable file is positioned at symbol table, process it and define symbols accordingly. */ - if (!((*ecoff_backend (abfd)->debug_swap.read_debug_info) - (abfd, NULL, &ecoff_data (abfd)->debug_info))) - error (_("Error reading symbol table: %s"), bfd_errmsg (bfd_get_error ())); - - mdebug_build_psymtabs (reader, objfile, &ecoff_backend (abfd)->debug_swap, - &ecoff_data (abfd)->debug_info); + mipsmdebug_build_psymtabs (objfile, &ecoff_backend (abfd)->debug_swap, + &ecoff_data (abfd)->debug_info); /* Add alpha coff dynamic symbols. */ + minimal_symbol_reader reader (objfile); + read_alphacoff_dynamic_symtab (reader, objfile); /* Install any minimal symbols that have been collected as the current @@ -374,9 +370,7 @@ static const struct sym_fns ecoff_sym_fns = NULL, /* sym_probe_fns */ }; -void _initialize_mipsread (); -void -_initialize_mipsread () +INIT_GDB_FILE (mipsread) { add_symtab_fns (bfd_target_ecoff_flavour, &ecoff_sym_fns); } diff --git a/gdb/mn10300-linux-tdep.c b/gdb/mn10300-linux-tdep.c index 3334ca0..6c31241 100644 --- a/gdb/mn10300-linux-tdep.c +++ b/gdb/mn10300-linux-tdep.c @@ -29,6 +29,7 @@ #include "trad-frame.h" #include "tramp-frame.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "gdbarch.h" /* Transliterated from <asm-mn10300/elf.h>... */ @@ -707,16 +708,13 @@ am33_linux_init_osabi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_iterate_over_regset_sections (gdbarch, am33_iterate_over_regset_sections); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); tramp_frame_prepend_unwinder (gdbarch, &am33_linux_sigframe); tramp_frame_prepend_unwinder (gdbarch, &am33_linux_rt_sigframe); } -void _initialize_mn10300_linux_tdep (); -void -_initialize_mn10300_linux_tdep () +INIT_GDB_FILE (mn10300_linux_tdep) { gdbarch_register_osabi (bfd_arch_mn10300, 0, GDB_OSABI_LINUX, am33_linux_init_osabi); diff --git a/gdb/mn10300-tdep.c b/gdb/mn10300-tdep.c index c82a302..fbaeacf 100644 --- a/gdb/mn10300-tdep.c +++ b/gdb/mn10300-tdep.c @@ -1413,9 +1413,7 @@ mn10300_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file) tdep->am33_mode); } -void _initialize_mn10300_tdep (); -void -_initialize_mn10300_tdep () +INIT_GDB_FILE (mn10300_tdep) { gdbarch_register (bfd_arch_mn10300, mn10300_gdbarch_init, mn10300_dump_tdep); } diff --git a/gdb/moxie-tdep.c b/gdb/moxie-tdep.c index ddb9efb..bb48877 100644 --- a/gdb/moxie-tdep.c +++ b/gdb/moxie-tdep.c @@ -1088,7 +1088,7 @@ moxie_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) frame_unwind_append_unwinder (gdbarch, &moxie_frame_unwind); /* Single stepping. */ - set_gdbarch_software_single_step (gdbarch, moxie_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, moxie_software_single_step); /* Support simple overlay manager. */ set_gdbarch_overlay_update (gdbarch, simple_overlay_update); @@ -1101,9 +1101,7 @@ moxie_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) /* Register this machine's init routine. */ -void _initialize_moxie_tdep (); -void -_initialize_moxie_tdep () +INIT_GDB_FILE (moxie_tdep) { gdbarch_register (bfd_arch_moxie, moxie_gdbarch_init); } diff --git a/gdb/msp430-tdep.c b/gdb/msp430-tdep.c index 441831e..7ac26b9 100644 --- a/gdb/msp430-tdep.c +++ b/gdb/msp430-tdep.c @@ -996,9 +996,7 @@ msp430_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) /* Register the initialization routine. */ -void _initialize_msp430_tdep (); -void -_initialize_msp430_tdep () +INIT_GDB_FILE (msp430_tdep) { gdbarch_register (bfd_arch_msp430, msp430_gdbarch_init); } diff --git a/gdb/nat/aarch64-hw-point.c b/gdb/nat/aarch64-hw-point.c index 6d8dce8..8c0854b 100644 --- a/gdb/nat/aarch64-hw-point.c +++ b/gdb/nat/aarch64-hw-point.c @@ -710,10 +710,8 @@ aarch64_stopped_data_address (const struct aarch64_debug_reg_state *state, itself. For instance, the access size of an stp instruction is 16. So, if we use stp to store to address p, and set a watchpoint on address p + 8, the reported ADDR_TRAP can be p + 8 (observed on - RK3399 SOC). But it also can be p (observed on M1 SOC). Checking - for this situation introduces the possibility of false positives, - so we only do this for hw_write watchpoints. */ - const CORE_ADDR max_access_size = type == hw_write ? 16 : 8; + RK3399 SOC). But it also can be p (observed on M1 SOC). */ + const CORE_ADDR max_access_size = 16; const CORE_ADDR addr_watch_base = addr_watch_aligned - (max_access_size - AARCH64_HWP_MAX_LEN_PER_REG); if (!(addr_trap >= addr_watch_base diff --git a/gdb/nat/linux-namespaces.c b/gdb/nat/linux-namespaces.c index ea94fdd..2a65fb0 100644 --- a/gdb/nat/linux-namespaces.c +++ b/gdb/nat/linux-namespaces.c @@ -233,6 +233,12 @@ enum mnsh_msg_type MNSH_RET_INT. */ MNSH_REQ_SETNS, + /* A request that the helper call lstat. The single + argument (the filename) should be passed in BUF, and + should include a terminating NUL character. The helper + should respond with a MNSH_RET_INTSTR. */ + MNSH_REQ_LSTAT, + /* A request that the helper call open. Arguments should be passed in BUF, INT1 and INT2. The filename (in BUF) should include a terminating NUL character. The helper @@ -265,62 +271,69 @@ enum mnsh_msg_type MNSH_RET_INTSTR, }; -/* Print a string representation of a message using debug_printf. - This function is not async-signal-safe so should never be - called from the helper. */ +/* Return a string representation of a message. This function is not + async-signal-safe so should never be called from the helper. */ -static void +static std::string mnsh_debug_print_message (enum mnsh_msg_type type, int fd, int int1, int int2, const void *buf, int bufsiz) { + std::string res; + gdb_byte *c = (gdb_byte *) buf; gdb_byte *cl = c + bufsiz; switch (type) { case MNSH_MSG_ERROR: - debug_printf ("ERROR"); + res += "ERROR"; + break; + + case MNSH_REQ_LSTAT: + res += "LSTAT"; break; case MNSH_REQ_SETNS: - debug_printf ("SETNS"); + res += "SETNS"; break; case MNSH_REQ_OPEN: - debug_printf ("OPEN"); + res += "OPEN"; break; case MNSH_REQ_UNLINK: - debug_printf ("UNLINK"); + res += "UNLINK"; break; case MNSH_REQ_READLINK: - debug_printf ("READLINK"); + res += "READLINK"; break; case MNSH_RET_INT: - debug_printf ("INT"); + res += "INT"; break; case MNSH_RET_FD: - debug_printf ("FD"); + res += "FD"; break; case MNSH_RET_INTSTR: - debug_printf ("INTSTR"); + res += "INTSTR"; break; default: - debug_printf ("unknown-packet-%d", type); + res += string_printf ("unknown-packet-%d", type); } - debug_printf (" %d %d %d \"", fd, int1, int2); + res += string_printf (" %d %d %d \"", fd, int1, int2); for (; c < cl; c++) - debug_printf (*c >= ' ' && *c <= '~' ? "%c" : "\\%o", *c); + res += string_printf (*c >= ' ' && *c <= '~' ? "%c" : "\\%o", *c); - debug_printf ("\""); + res += "\""; + + return res; } /* Forward declaration. */ @@ -390,12 +403,10 @@ mnsh_send_message (int sock, enum mnsh_msg_type type, if (size < 0) mnsh_maybe_mourn_peer (); - if (debug_linux_namespaces) - { - debug_printf ("mnsh: send: "); - mnsh_debug_print_message (type, fd, int1, int2, buf, bufsiz); - debug_printf (" -> %s\n", pulongest (size)); - } + linux_namespaces_debug_printf + ("send: %s -> %s", + mnsh_debug_print_message (type, fd, int1, int2, buf, bufsiz).c_str (), + pulongest (size)); return size; } @@ -445,9 +456,8 @@ mnsh_recv_message (int sock, enum mnsh_msg_type *type, size = recvmsg (sock, &msg, MSG_CMSG_CLOEXEC); if (size < 0) { - if (debug_linux_namespaces) - debug_printf ("namespace-helper: recv failed (%s)\n", - pulongest (size)); + linux_namespaces_debug_printf + ("namespace-helper: recv failed (%s)", pulongest (size)); mnsh_maybe_mourn_peer (); @@ -457,9 +467,9 @@ mnsh_recv_message (int sock, enum mnsh_msg_type *type, /* Check for truncation. */ if (size < fixed_size || (msg.msg_flags & (MSG_TRUNC | MSG_CTRUNC))) { - if (debug_linux_namespaces) - debug_printf ("namespace-helper: recv truncated (%s 0x%x)\n", - pulongest (size), msg.msg_flags); + linux_namespaces_debug_printf + ("namespace-helper: recv truncated (%s 0x%x)", + pulongest (size), msg.msg_flags); mnsh_maybe_mourn_peer (); @@ -477,13 +487,10 @@ mnsh_recv_message (int sock, enum mnsh_msg_type *type, else *fd = -1; - if (debug_linux_namespaces) - { - debug_printf ("mnsh: recv: "); - mnsh_debug_print_message (*type, *fd, *int1, *int2, buf, - size - fixed_size); - debug_printf ("\n"); - } + linux_namespaces_debug_printf + ("recv: %s", + mnsh_debug_print_message (*type, *fd, *int1, *int2, buf, + size - fixed_size).c_str ()); /* Return the number of bytes of data in BUF. */ return size - fixed_size; @@ -514,6 +521,20 @@ mnsh_handle_setns (int sock, int fd, int nstype) return mnsh_return_int (sock, result, errno); } + +/* Handle a MNSH_REQ_LSTAT message. Must be async-signal-safe. */ + +static ssize_t +mnsh_handle_lstat (int sock, const char *filename) +{ + struct stat sb; + int stat_ok = lstat (filename, &sb); + + return mnsh_return_intstr (sock, stat_ok, &sb, + stat_ok == -1 ? 0 : sizeof (sb), + errno); +} + /* Handle a MNSH_REQ_OPEN message. Must be async-signal-safe. */ static ssize_t @@ -574,6 +595,11 @@ mnsh_main (int sock) response = mnsh_handle_setns (sock, fd, int1); break; + case MNSH_REQ_LSTAT: + if (size > 0 && buf[size - 1] == '\0') + response = mnsh_handle_lstat (sock, buf); + break; + case MNSH_REQ_OPEN: if (size > 0 && buf[size - 1] == '\0') response = mnsh_handle_open (sock, buf, int1, int2); @@ -673,7 +699,7 @@ linux_mntns_get_helper (void) mnsh_creator_pid = helper_creator; /* Debug printing isn't async-signal-safe. */ - debug_linux_namespaces = 0; + debug_linux_namespaces = false; mnsh_main (sv[1]); } @@ -685,9 +711,8 @@ linux_mntns_get_helper (void) helper->sock = sv[0]; helper->nsid = ns->id; - if (debug_linux_namespaces) - debug_printf ("Started mount namespace helper process %d\n", - helper->pid); + linux_namespaces_debug_printf + ("Started mount namespace helper process %d", helper->pid); } return helper; @@ -765,6 +790,10 @@ mnsh_maybe_mourn_peer (void) mnsh_send_message (helper->sock, MNSH_REQ_OPEN, -1, flags, mode, \ filename, strlen (filename) + 1) +#define mnsh_send_lstat(helper, filename) \ + mnsh_send_message (helper->sock, MNSH_REQ_LSTAT, -1, 0, 0, \ + filename, strlen (filename) + 1) + #define mnsh_send_unlink(helper, filename) \ mnsh_send_message (helper->sock, MNSH_REQ_UNLINK, -1, 0, 0, \ filename, strlen (filename) + 1) @@ -884,7 +913,7 @@ linux_mntns_access_fs (pid_t pid) struct stat sb; struct linux_mnsh *helper; ssize_t size; - int fd; + int fd, fd_user = -1; if (pid == getpid ()) return MNSH_FS_DIRECT; @@ -901,6 +930,8 @@ linux_mntns_access_fs (pid_t pid) { int save_errno = errno; close (fd); + if (fd_user >= 0) + close (fd_user); errno = save_errno; }; @@ -910,6 +941,13 @@ linux_mntns_access_fs (pid_t pid) if (sb.st_ino == ns->id) return MNSH_FS_DIRECT; + struct linux_ns *ns_user = linux_ns_get_namespace (LINUX_NS_USER); + if (ns_user != nullptr) + { + const char *ns_filename = linux_ns_filename (ns_user, pid); + fd_user = gdb_open_cloexec (ns_filename, O_RDONLY, 0).release (); + } + helper = linux_mntns_get_helper (); if (helper == NULL) return MNSH_FS_ERROR; @@ -918,6 +956,19 @@ linux_mntns_access_fs (pid_t pid) { int result, error; + /* Try to enter the user namespace first. The current user might + have elevated privileges within the user namespace, which would + then allow the attempt to enter the mount namespace to succeed. */ + if (fd_user >= 0) + { + size = mnsh_send_setns (helper, fd_user, 0); + if (size < 0) + return MNSH_FS_ERROR; + + if (mnsh_recv_int (helper, &result, &error) != 0) + return MNSH_FS_ERROR; + } + size = mnsh_send_setns (helper, fd, 0); if (size < 0) return MNSH_FS_ERROR; @@ -948,6 +999,42 @@ linux_mntns_access_fs (pid_t pid) /* See nat/linux-namespaces.h. */ int +linux_mntns_lstat (pid_t pid, const char *filename, + struct stat *sb) +{ + enum mnsh_fs_code access = linux_mntns_access_fs (pid); + + if (access == MNSH_FS_ERROR) + return -1; + + if (access == MNSH_FS_DIRECT) + return lstat (filename, sb); + + gdb_assert (access == MNSH_FS_HELPER); + + struct linux_mnsh *helper = linux_mntns_get_helper (); + + ssize_t size = mnsh_send_lstat (helper, filename); + if (size < 0) + return -1; + + int stat_ok, error; + size = mnsh_recv_intstr (helper, &stat_ok, &error, sb, sizeof (*sb)); + + if (size < 0) + { + stat_ok = -1; + errno = error; + } + else + gdb_assert (stat_ok == -1 || size == sizeof (*sb)); + + return stat_ok; +} + +/* See nat/linux-namespaces.h. */ + +int linux_mntns_open_cloexec (pid_t pid, const char *filename, int flags, mode_t mode) { diff --git a/gdb/nat/linux-namespaces.h b/gdb/nat/linux-namespaces.h index a548d83..a9a99f1 100644 --- a/gdb/nat/linux-namespaces.h +++ b/gdb/nat/linux-namespaces.h @@ -24,6 +24,12 @@ extern bool debug_linux_namespaces; +/* Print a "linux-namespaces" debug statement. */ + +#define linux_namespaces_debug_printf(fmt, ...) \ + debug_prefixed_printf_cond (debug_linux_namespaces, "linux-namespaces", \ + fmt, ##__VA_ARGS__) + /* Enumeration of Linux namespace types. */ enum linux_ns_type @@ -58,6 +64,11 @@ enum linux_ns_type extern int linux_ns_same (pid_t pid, enum linux_ns_type type); +/* Like lstat(2), but in the mount namespace of process PID. */ + +extern int linux_mntns_lstat (pid_t pid, const char *filename, + struct stat *sb); + /* Like gdb_open_cloexec, but in the mount namespace of process PID. */ diff --git a/gdb/nat/linux-procfs.c b/gdb/nat/linux-procfs.c index a72df2a..d4f9af3 100644 --- a/gdb/nat/linux-procfs.c +++ b/gdb/nat/linux-procfs.c @@ -424,7 +424,7 @@ linux_proc_task_list_dir_exists (pid_t pid) /* See linux-procfs.h. */ const char * -linux_proc_pid_to_exec_file (int pid) +linux_proc_pid_to_exec_file (int pid, bool is_local_fs) { static char buf[PATH_MAX]; char name[PATH_MAX]; @@ -437,9 +437,31 @@ linux_proc_pid_to_exec_file (int pid) else buf[len] = '\0'; - /* Use /proc/PID/exe if the actual file can't be read, but /proc/PID/exe - can be. */ - if (access (buf, R_OK) != 0 && access (name, R_OK) == 0) + /* If the inferior and GDB can see the same filesystem, and NAME + cannot be read, maybe the file has been deleted, then we can + potentially use /proc/PID/exe instead. + + GDB always interprets the results of this function within the + current sysroot (which is 'target:' by default). This means + that, if we return /proc/PID/exe, GDB will try to find this file + within the sysroot. + + This doesn't make sense if GDB is using a sysroot like: + '/some/random/directory/', not only is it possible that NAME + could be found within the sysroot, it is unlikely that + /proc/PID/exe will exist within the sysroot. + + Similarly, if the sysroot is 'target:', but the inferior is + running within a separate MNT namespace, then it is more than + likely that the inferior will also be running in a separate PID + namespace, in this case PID is the pid on the host system, + /proc/PID/exe will not be correct within the inferiors MNT/PID + namespace. + + So, we can fallback to use /proc/PID/exe only if IS_LOCAL_FS is + true, this indicates that GDB and the inferior are using the same + MNT namespace, and GDB's sysroot is either empty, or 'target:'. */ + if (is_local_fs && access (buf, R_OK) != 0 && access (name, R_OK) == 0) strcpy (buf, name); return buf; diff --git a/gdb/nat/linux-procfs.h b/gdb/nat/linux-procfs.h index 0c80622..4b02d31 100644 --- a/gdb/nat/linux-procfs.h +++ b/gdb/nat/linux-procfs.h @@ -87,9 +87,19 @@ extern int linux_proc_task_list_dir_exists (pid_t pid); /* Return the full absolute name of the executable file that was run to create the process PID. The returned value persists until this - function is next called. */ + function is next called. -extern const char *linux_proc_pid_to_exec_file (int pid); + LOCAL_FS should be true if the file returned from the function will + be searched for in the same filesystem as GDB itself is running. + In practice, this means LOCAL_FS should be true if PID and GDB are + running in the same MNT namespace and GDB's sysroot is either the + empty string, or is 'target:'. + + When used from gdbserver, where there is no sysroot, the only check + that matters is that PID and gdbserver are running in the same MNT + namespace. */ + +extern const char *linux_proc_pid_to_exec_file (int pid, bool local_fs); /* Display possible problems on this system. Display them only once per GDB execution. */ diff --git a/gdb/nat/linux-ptrace.c b/gdb/nat/linux-ptrace.c index 0510b39..f73058b 100644 --- a/gdb/nat/linux-ptrace.c +++ b/gdb/nat/linux-ptrace.c @@ -23,6 +23,7 @@ #include <sys/procfs.h> #endif #include "gdbsupport/eintr.h" +#include "gdbsupport/signals-state-save-restore.h" /* Stores the ptrace options supported by the running kernel. A value of -1 means we did not check for features yet. A value @@ -148,6 +149,9 @@ linux_ptrace_test_ret_to_nx (void) return; case 0: + /* Set signal handlers to their default because it doesn't make sense + to call GDB-specific handlers any more in the child process. */ + restore_original_signals_state (); l = ptrace (PTRACE_TRACEME, 0, (PTRACE_TYPE_ARG3) NULL, (PTRACE_TYPE_ARG4) NULL); if (l != 0) diff --git a/gdb/nds32-tdep.c b/gdb/nds32-tdep.c index 7d826fc..9180cd0 100644 --- a/gdb/nds32-tdep.c +++ b/gdb/nds32-tdep.c @@ -2086,9 +2086,7 @@ nds32_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_nds32_tdep (); -void -_initialize_nds32_tdep () +INIT_GDB_FILE (nds32_tdep) { /* Initialize gdbarch. */ gdbarch_register (bfd_arch_nds32, nds32_gdbarch_init); diff --git a/gdb/objc-lang.c b/gdb/objc-lang.c index 5341b05..6bba8d3 100644 --- a/gdb/objc-lang.c +++ b/gdb/objc-lang.c @@ -1327,9 +1327,7 @@ find_objc_msgcall (CORE_ADDR pc, CORE_ADDR *new_pc) return 0; } -void _initialize_objc_language (); -void -_initialize_objc_language () +INIT_GDB_FILE (objc_language) { add_info ("selectors", info_selectors_command, _("All Objective-C selectors, or those matching REGEXP.")); diff --git a/gdb/objfiles.c b/gdb/objfiles.c index 3c5a554..1cd6e8c 100644 --- a/gdb/objfiles.c +++ b/gdb/objfiles.c @@ -521,8 +521,8 @@ relocate_one_symbol (struct symbol *sym, struct objfile *objfile, any symbols in STRUCT_DOMAIN or UNDEF_DOMAIN. But I'm leaving out that test, on the theory that they can't possibly pass the tests below. */ - if ((sym->aclass () == LOC_LABEL - || sym->aclass () == LOC_STATIC) + if ((sym->loc_class () == LOC_LABEL + || sym->loc_class () == LOC_STATIC) && sym->section_index () >= 0) sym->set_value_address (sym->value_address () + delta[sym->section_index ()]); @@ -673,18 +673,18 @@ objfile_rebase (struct objfile *objfile, CORE_ADDR slide) /* See objfiles.h. */ bool -objfile_has_full_symbols (objfile *objfile) +objfile::has_full_symbols () { - return objfile->compunit_symtabs != nullptr; + return this->compunit_symtabs != nullptr; } /* See objfiles.h. */ bool -objfile_has_symbols (objfile *objfile) +objfile::has_symbols () { - for (::objfile *o : objfile->separate_debug_objfiles ()) - if (o->has_partial_symbols () || objfile_has_full_symbols (o)) + for (::objfile *o : this->separate_debug_objfiles ()) + if (o->has_partial_symbols () || o->has_full_symbols ()) return true; return false; @@ -708,7 +708,7 @@ bool have_full_symbols (program_space *pspace) { for (objfile *ofp : pspace->objfiles ()) - if (objfile_has_full_symbols (ofp)) + if (ofp->has_full_symbols ()) return true; return false; diff --git a/gdb/objfiles.h b/gdb/objfiles.h index bb2f05d..4a34758 100644 --- a/gdb/objfiles.h +++ b/gdb/objfiles.h @@ -515,10 +515,16 @@ public: return per_bfd->gdbarch; } - /* Return true if OBJFILE has partial symbols. */ - + /* Return true if this objfile has partial symbols. */ bool has_partial_symbols (); + /* Return true if this objfile has full symbols. */ + bool has_full_symbols (); + + /* Return true if this objfile has full or partial symbols, either directly + or through a separate debug file. */ + bool has_symbols (); + /* Look for a separate debug symbol file for this objfile, make use of build-id, debug-link, and debuginfod as necessary. If a suitable separate debug symbol file is found then it is loaded using a call to @@ -938,15 +944,6 @@ extern void free_objfile_separate_debug (struct objfile *); extern void objfile_relocate (struct objfile *, const section_offsets &); extern void objfile_rebase (struct objfile *, CORE_ADDR); -/* Return true if OBJFILE has full symbols. */ - -extern bool objfile_has_full_symbols (objfile *objfile); - -/* Return true if OBJFILE has full or partial symbols, either directly - or through a separate debug file. */ - -extern bool objfile_has_symbols (objfile *objfile); - /* Return true if any objfile of PSPACE has partial symbols. */ extern bool have_partial_symbols (program_space *pspace); @@ -992,10 +989,10 @@ extern struct obj_section *find_pc_section (CORE_ADDR pc); /* Return true if PC is in a section called NAME. */ extern bool pc_in_section (CORE_ADDR, const char *); -/* Return non-zero if PC is in a SVR4-style procedure linkage table +/* Return true if PC is in a SVR4-style procedure linkage table section. */ -static inline int +static inline bool in_plt_section (CORE_ADDR pc) { return (pc_in_section (pc, ".plt") diff --git a/gdb/observable.c b/gdb/observable.c index 734a5f6..1233a19 100644 --- a/gdb/observable.c +++ b/gdb/observable.c @@ -87,9 +87,7 @@ show_observer_debug (struct ui_file *file, int from_tty, gdb_printf (file, _("Observer debugging is %s.\n"), value); } -void _initialize_observer (); -void -_initialize_observer () +INIT_GDB_FILE (observer) { add_setshow_boolean_cmd ("observer", class_maintenance, &gdb::observers::observer_debug, _("\ diff --git a/gdb/or1k-linux-nat.c b/gdb/or1k-linux-nat.c index 3a80dc9..cc682ea 100644 --- a/gdb/or1k-linux-nat.c +++ b/gdb/or1k-linux-nat.c @@ -199,9 +199,7 @@ or1k_linux_nat_target::store_registers (struct regcache *regcache, int regnum) /* Initialize OpenRISC Linux native support. */ -void _initialize_or1k_linux_nat (); -void -_initialize_or1k_linux_nat () +INIT_GDB_FILE (or1k_linux_nat) { /* Register the target. */ linux_target = &the_or1k_linux_nat_target; diff --git a/gdb/or1k-linux-tdep.c b/gdb/or1k-linux-tdep.c index 4784e0b..9fbf75f 100644 --- a/gdb/or1k-linux-tdep.c +++ b/gdb/or1k-linux-tdep.c @@ -20,6 +20,7 @@ #include "osabi.h" #include "glibc-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "solib-svr4.h" #include "regset.h" #include "tramp-frame.h" @@ -144,8 +145,7 @@ or1k_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) { linux_init_abi (info, gdbarch, 0); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); /* GNU/Linux uses SVR4-style shared libraries. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); @@ -153,7 +153,7 @@ or1k_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* GNU/Linux uses the dynamic linker included in the GNU C Library. */ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); - set_gdbarch_software_single_step (gdbarch, or1k_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, or1k_software_single_step); /* Enable TLS support. */ set_gdbarch_fetch_tls_load_module_address (gdbarch, @@ -167,9 +167,7 @@ or1k_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Initialize OpenRISC Linux target support. */ -void _initialize_or1k_linux_tdep (); -void -_initialize_or1k_linux_tdep () +INIT_GDB_FILE (or1k_linux_tdep) { gdbarch_register_osabi (bfd_arch_or1k, 0, GDB_OSABI_LINUX, or1k_linux_init_abi); diff --git a/gdb/or1k-tdep.c b/gdb/or1k-tdep.c index 8e76419..2774840 100644 --- a/gdb/or1k-tdep.c +++ b/gdb/or1k-tdep.c @@ -1286,9 +1286,7 @@ or1k_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file) } -void _initialize_or1k_tdep (); -void -_initialize_or1k_tdep () +INIT_GDB_FILE (or1k_tdep) { /* Register this architecture. */ gdbarch_register (bfd_arch_or1k, or1k_gdbarch_init, or1k_dump_tdep); diff --git a/gdb/osabi.c b/gdb/osabi.c index ae14f74..1459368 100644 --- a/gdb/osabi.c +++ b/gdb/osabi.c @@ -609,9 +609,7 @@ show_osabi (struct ui_file *file, int from_tty, struct cmd_list_element *c, gdbarch_osabi_name (GDB_OSABI_DEFAULT)); } -void _initialize_gdb_osabi (); -void -_initialize_gdb_osabi () +INIT_GDB_FILE (gdb_osabi) { /* Register a generic sniffer for ELF flavoured files. */ gdbarch_register_osabi_sniffer (bfd_arch_unknown, diff --git a/gdb/osdata.c b/gdb/osdata.c index 5cc584d..788dd2a 100644 --- a/gdb/osdata.c +++ b/gdb/osdata.c @@ -287,9 +287,7 @@ info_osdata_command (const char *arg, int from_tty) info_osdata (arg); } -void _initialize_osdata (); -void -_initialize_osdata () +INIT_GDB_FILE (osdata) { add_info ("os", info_osdata_command, _("Show OS data ARG.")); diff --git a/gdb/p-exp.y b/gdb/p-exp.y index cbf6b44..2b923ab 100644 --- a/gdb/p-exp.y +++ b/gdb/p-exp.y @@ -1519,7 +1519,7 @@ yylex (void) /* Call lookup_symtab, not lookup_partial_symtab, in case there are no psymtabs (coff, xcoff, or some future change to blow away the psymtabs once once symbols are read). */ - if ((sym && sym->aclass () == LOC_BLOCK) + if ((sym && sym->loc_class () == LOC_BLOCK) || lookup_symtab (current_program_space, tmp.c_str ())) { yylval.ssym.sym.symbol = sym; @@ -1528,7 +1528,7 @@ yylex (void) free (uptokstart); return BLOCKNAME; } - if (sym && sym->aclass () == LOC_TYPEDEF) + if (sym && sym->loc_class () == LOC_TYPEDEF) { #if 1 /* Despite the following flaw, we need to keep this code enabled. @@ -1597,7 +1597,7 @@ yylex (void) SEARCH_VFT, NULL).symbol; if (cur_sym) { - if (cur_sym->aclass () == LOC_TYPEDEF) + if (cur_sym->loc_class () == LOC_TYPEDEF) { best_sym = cur_sym; pstate->lexptr = p; diff --git a/gdb/p-valprint.c b/gdb/p-valprint.c index 5dcdbcd..8228ca0 100644 --- a/gdb/p-valprint.c +++ b/gdb/p-valprint.c @@ -860,9 +860,7 @@ pascal_object_print_static_field (struct value *val, common_val_print (val, stream, recurse, &opts, current_language); } -void _initialize_pascal_valprint (); -void -_initialize_pascal_valprint () +INIT_GDB_FILE (pascal_valprint) { add_setshow_boolean_cmd ("pascal_static-members", class_support, &user_print_options.pascal_static_field_print, _("\ diff --git a/gdb/pager.h b/gdb/pager.h index 052337d..b5425d4 100644 --- a/gdb/pager.h +++ b/gdb/pager.h @@ -68,6 +68,16 @@ private: /* Flush the wrap buffer to STREAM, if necessary. */ void flush_wrap_buffer (); + /* Set the style of m_stream to STYLE. */ + void set_stream_style (const ui_file_style &style) + { + if (m_stream->can_emit_style_escape () && m_stream_style != style) + { + m_stream->puts (style.to_ansi ().c_str ()); + m_stream_style = style; + } + } + /* Contains characters which are waiting to be output (they have already been counted in chars_printed). */ std::string m_wrap_buffer; @@ -82,6 +92,12 @@ private: /* The style applied at the time that wrap_here was called. */ ui_file_style m_wrap_style; + /* The style currently applied to m_stream. While m_applied_style is the + style that is applied to new content added to m_wrap_buffer, the + m_stream_style reflects changes that have been flushed to the managed + stream. */ + ui_file_style m_stream_style; + /* This is temporarily set when paging. This will cause some methods to change their behavior to ignore the wrap buffer. */ bool m_paging = false; diff --git a/gdb/parse.c b/gdb/parse.c index 64653c8..6ad4e71 100644 --- a/gdb/parse.c +++ b/gdb/parse.c @@ -617,9 +617,7 @@ parser_fprintf (FILE *x, const char *y, ...) va_end (args); } -void _initialize_parse (); -void -_initialize_parse () +INIT_GDB_FILE (parse) { add_setshow_zuinteger_cmd ("expression", class_maintenance, &expressiondebug, diff --git a/gdb/ppc-fbsd-nat.c b/gdb/ppc-fbsd-nat.c index e8853cf..e59791d 100644 --- a/gdb/ppc-fbsd-nat.c +++ b/gdb/ppc-fbsd-nat.c @@ -200,9 +200,7 @@ ppcfbsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) return 1; } -void _initialize_ppcfbsd_nat (); -void -_initialize_ppcfbsd_nat () +INIT_GDB_FILE (ppcfbsd_nat) { add_inf_child_target (&the_ppc_fbsd_nat_target); diff --git a/gdb/ppc-fbsd-tdep.c b/gdb/ppc-fbsd-tdep.c index 3bab031..a666509 100644 --- a/gdb/ppc-fbsd-tdep.c +++ b/gdb/ppc-fbsd-tdep.c @@ -332,8 +332,7 @@ ppcfbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_return_value (gdbarch, ppcfbsd_return_value); set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); frame_unwind_append_unwinder (gdbarch, &ppcfbsd_sigtramp_frame_unwind); set_gdbarch_gcore_bfd_target (gdbarch, "elf32-powerpc"); @@ -347,8 +346,7 @@ ppcfbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) ppc64_elf_make_msymbol_special); set_gdbarch_skip_trampoline_code (gdbarch, ppc64_skip_trampoline_code); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); set_gdbarch_gcore_bfd_target (gdbarch, "elf64-powerpc"); } @@ -361,9 +359,7 @@ ppcfbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) ppcfbsd_get_thread_local_address); } -void _initialize_ppcfbsd_tdep (); -void -_initialize_ppcfbsd_tdep () +INIT_GDB_FILE (ppcfbsd_tdep) { gdbarch_register_osabi (bfd_arch_powerpc, bfd_mach_ppc, GDB_OSABI_FREEBSD, ppcfbsd_init_abi); diff --git a/gdb/ppc-linux-nat.c b/gdb/ppc-linux-nat.c index 0397ccb..568202a 100644 --- a/gdb/ppc-linux-nat.c +++ b/gdb/ppc-linux-nat.c @@ -3232,9 +3232,7 @@ ppc_linux_nat_target::get_arch_lwp_info (struct lwp_info *lp) return lwp_arch_private_info (lp); } -void _initialize_ppc_linux_nat (); -void -_initialize_ppc_linux_nat () +INIT_GDB_FILE (ppc_linux_nat) { linux_target = &the_ppc_linux_nat_target; diff --git a/gdb/ppc-linux-tdep.c b/gdb/ppc-linux-tdep.c index 441f317..5067b89 100644 --- a/gdb/ppc-linux-tdep.c +++ b/gdb/ppc-linux-tdep.c @@ -32,7 +32,6 @@ #include "regset.h" #include "solib-svr4.h" #include "solib.h" -#include "solist.h" #include "ppc-tdep.h" #include "ppc64-tdep.h" #include "ppc-linux-tdep.h" @@ -49,6 +48,7 @@ #include "arch-utils.h" #include "xml-syscall.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "svr4-tls-tdep.h" #include "linux-record.h" #include "record-full.h" @@ -87,8 +87,6 @@ #include "features/rs6000/powerpc-e500l.c" #include "dwarf2/frame.h" -/* Shared library operations for PowerPC-Linux. */ -static solib_ops powerpc_so_ops; /* The syscall's XML filename for PPC and PPC64. */ #define XML_SYSCALL_FILENAME_PPC "syscalls/ppc-linux.xml" @@ -307,26 +305,43 @@ static const struct ppc_insn_pattern powerpc32_plt_stub_so_2[] = /* The max number of insns we check using ppc_insns_match_pattern. */ #define POWERPC32_PLT_CHECK_LEN (ARRAY_SIZE (powerpc32_plt_stub) - 1) -/* Check if PC is in PLT stub. For non-secure PLT, stub is in .plt - section. For secure PLT, stub is in .text and we need to check - instruction patterns. */ +/* solib_ops for ILP32 PowerPC/Linux systems. */ -static int -powerpc_linux_in_dynsym_resolve_code (CORE_ADDR pc) +struct ppc_linux_ilp32_svr4_solib_ops : public linux_ilp32_svr4_solib_ops +{ + /* Check if PC is in PLT stub. For non-secure PLT, stub is in .plt + section. For secure PLT, stub is in .text and we need to check + instruction patterns. */ + + bool in_dynsym_resolve_code (CORE_ADDR pc) const override; +}; + +/* Return a new solib_ops for ILP32 PowerPC/Linux systems. */ + +static solib_ops_up +make_ppc_linux_ilp32_svr4_solib_ops () +{ + return std::make_unique<ppc_linux_ilp32_svr4_solib_ops> (); +} + +/* See ppc_linux_ilp32_svr4_solib_ops. */ + +bool +ppc_linux_ilp32_svr4_solib_ops::in_dynsym_resolve_code (CORE_ADDR pc) const { /* Check whether PC is in the dynamic linker. This also checks whether it is in the .plt section, used by non-PIC executables. */ - if (svr4_in_dynsym_resolve_code (pc)) - return 1; + if (linux_ilp32_svr4_solib_ops::in_dynsym_resolve_code (pc)) + return true; /* Check if we are in the resolver. */ bound_minimal_symbol sym = lookup_minimal_symbol_by_pc (pc); - if (sym.minsym != NULL - && (strcmp (sym.minsym->linkage_name (), "__glink") == 0 - || strcmp (sym.minsym->linkage_name (), "__glink_PLTresolve") == 0)) - return 1; - return 0; + if (sym.minsym == nullptr) + return false; + + return (strcmp (sym.minsym->linkage_name (), "__glink") == 0 + || strcmp (sym.minsym->linkage_name (), "__glink_PLTresolve") == 0); } /* Follow PLT stub to actual routine. @@ -2266,8 +2281,6 @@ ppc_linux_init_abi (struct gdbarch_info info, /* Shared library handling. */ set_gdbarch_skip_trampoline_code (gdbarch, ppc_skip_trampoline_code); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); /* Setting the correct XML syscall filename. */ set_xml_syscall_file_name (gdbarch, XML_SYSCALL_FILENAME_PPC); @@ -2284,14 +2297,7 @@ ppc_linux_init_abi (struct gdbarch_info info, else set_gdbarch_gcore_bfd_target (gdbarch, "elf32-powerpc"); - if (powerpc_so_ops.in_dynsym_resolve_code == NULL) - { - powerpc_so_ops = svr4_so_ops; - /* Override dynamic resolve function. */ - powerpc_so_ops.in_dynsym_resolve_code = - powerpc_linux_in_dynsym_resolve_code; - } - set_gdbarch_so_ops (gdbarch, &powerpc_so_ops); + set_solib_svr4_ops (gdbarch, make_ppc_linux_ilp32_svr4_solib_ops); set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); } @@ -2318,8 +2324,7 @@ ppc_linux_init_abi (struct gdbarch_info info, /* Shared library handling. */ set_gdbarch_skip_trampoline_code (gdbarch, ppc64_skip_trampoline_code); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_lp64_svr4_solib_ops); /* Setting the correct XML syscall filename. */ set_xml_syscall_file_name (gdbarch, XML_SYSCALL_FILENAME_PPC64); @@ -2393,9 +2398,7 @@ ppc_linux_init_abi (struct gdbarch_info info, } -void _initialize_ppc_linux_tdep (); -void -_initialize_ppc_linux_tdep () +INIT_GDB_FILE (ppc_linux_tdep) { /* Register for all sub-families of the POWER/PowerPC: 32-bit and 64-bit PowerPC, and the older rs6k. */ diff --git a/gdb/ppc-netbsd-nat.c b/gdb/ppc-netbsd-nat.c index a8e65bb..dfb855a 100644 --- a/gdb/ppc-netbsd-nat.c +++ b/gdb/ppc-netbsd-nat.c @@ -183,9 +183,7 @@ ppcnbsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) return 1; } -void _initialize_ppcnbsd_nat (); -void -_initialize_ppcnbsd_nat () +INIT_GDB_FILE (ppcnbsd_nat) { /* Support debugging kernel virtual memory images. */ bsd_kvm_add_target (ppcnbsd_supply_pcb); diff --git a/gdb/ppc-netbsd-tdep.c b/gdb/ppc-netbsd-tdep.c index 911c012..9913592 100644 --- a/gdb/ppc-netbsd-tdep.c +++ b/gdb/ppc-netbsd-tdep.c @@ -179,8 +179,7 @@ ppcnbsd_init_abi (struct gdbarch_info info, set_gdbarch_return_value (gdbarch, ppcnbsd_return_value); /* NetBSD uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); set_gdbarch_iterate_over_regset_sections (gdbarch, ppcnbsd_iterate_over_regset_sections); @@ -189,9 +188,7 @@ ppcnbsd_init_abi (struct gdbarch_info info, tramp_frame_prepend_unwinder (gdbarch, &ppcnbsd2_sigtramp); } -void _initialize_ppcnbsd_tdep (); -void -_initialize_ppcnbsd_tdep () +INIT_GDB_FILE (ppcnbsd_tdep) { gdbarch_register_osabi (bfd_arch_powerpc, 0, GDB_OSABI_NETBSD, ppcnbsd_init_abi); diff --git a/gdb/ppc-obsd-nat.c b/gdb/ppc-obsd-nat.c index 1431aa6..48df9d7 100644 --- a/gdb/ppc-obsd-nat.c +++ b/gdb/ppc-obsd-nat.c @@ -186,9 +186,7 @@ ppcobsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) return 1; } -void _initialize_ppcobsd_nat (); -void -_initialize_ppcobsd_nat () +INIT_GDB_FILE (ppcobsd_nat) { add_inf_child_target (&the_ppc_obsd_nat_target); diff --git a/gdb/ppc-obsd-tdep.c b/gdb/ppc-obsd-tdep.c index 5e271c1..18f4d79 100644 --- a/gdb/ppc-obsd-tdep.c +++ b/gdb/ppc-obsd-tdep.c @@ -254,8 +254,7 @@ ppcobsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_return_value (gdbarch, ppc_sysv_abi_broken_return_value); /* OpenBSD uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); set_gdbarch_iterate_over_regset_sections (gdbarch, ppcobsd_iterate_over_regset_sections); @@ -263,9 +262,7 @@ ppcobsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) frame_unwind_append_unwinder (gdbarch, &ppcobsd_sigtramp_frame_unwind); } -void _initialize_ppcobsd_tdep (); -void -_initialize_ppcobsd_tdep () +INIT_GDB_FILE (ppcobsd_tdep) { gdbarch_register_osabi (bfd_arch_rs6000, 0, GDB_OSABI_OPENBSD, ppcobsd_init_abi); diff --git a/gdb/ppc-sysv-tdep.c b/gdb/ppc-sysv-tdep.c index bcf4e2a..f872f73 100644 --- a/gdb/ppc-sysv-tdep.c +++ b/gdb/ppc-sysv-tdep.c @@ -2060,10 +2060,12 @@ ppc64_sysv_abi_return_value (struct gdbarch *gdbarch, struct value *function, } /* Small character arrays are returned, right justified, in r3. */ - if (valtype->code () == TYPE_CODE_ARRAY + if (tdep->elf_abi == POWERPC_ELF_V1 + && valtype->code () == TYPE_CODE_ARRAY && !valtype->is_vector () && valtype->length () <= 8 - && valtype->target_type ()->code () == TYPE_CODE_INT + && (valtype->target_type ()->code () == TYPE_CODE_INT + || valtype->target_type ()->code () == TYPE_CODE_CHAR) && valtype->target_type ()->length () == 1) { int regnum = tdep->ppc_gp0_regnum + 3; @@ -2112,6 +2114,7 @@ ppc64_sysv_abi_return_value (struct gdbarch *gdbarch, struct value *function, /* In the ELFv2 ABI, aggregate types of up to 16 bytes are returned in registers r3:r4. */ if (tdep->elf_abi == POWERPC_ELF_V2 + && !TYPE_HAS_DYNAMIC_LENGTH (valtype) && valtype->length () <= 16 && (valtype->code () == TYPE_CODE_STRUCT || valtype->code () == TYPE_CODE_UNION diff --git a/gdb/printcmd.c b/gdb/printcmd.c index 6659c5a..1c50b6c 100644 --- a/gdb/printcmd.c +++ b/gdb/printcmd.c @@ -753,10 +753,10 @@ pc_prefix (CORE_ADDR addr) if (has_stack_frames ()) { frame_info_ptr frame; - CORE_ADDR pc; + std::optional<CORE_ADDR> pc; frame = get_selected_frame (NULL); - if (get_frame_pc_if_available (frame, &pc) && pc == addr) + if ((pc = get_frame_pc_if_available (frame)) && *pc == addr) return "=> "; } return " "; @@ -1290,7 +1290,9 @@ should_validate_memtags (gdbarch *gdbarch, struct value *value) return false; /* We do. Check whether it includes any tags. */ - return target_is_address_tagged (gdbarch, value_as_address (value)); + struct type *val_type = value->type (); + const gdb_byte *data = value->contents ().data (); + return target_is_address_tagged (gdbarch, unpack_pointer (val_type, data)); } /* Helper for parsing arguments for print_command_1. */ @@ -1653,7 +1655,7 @@ info_address_command (const char *exp, int from_tty) return; } - switch (sym->aclass ()) + switch (sym->loc_class ()) { case LOC_CONST: case LOC_CONST_BYTES: @@ -2394,7 +2396,7 @@ printf_c_string (struct ui_file *stream, const char *format, } else { - CORE_ADDR tem = value_as_address (value);; + CORE_ADDR tem = value_as_address (value); if (tem == 0) { @@ -3183,9 +3185,7 @@ memory_tag_check_command (const char *args, int from_tty) } } -void _initialize_printcmd (); -void -_initialize_printcmd () +INIT_GDB_FILE (printcmd) { struct cmd_list_element *c; diff --git a/gdb/probe.c b/gdb/probe.c index e6788ff..6679f39 100644 --- a/gdb/probe.c +++ b/gdb/probe.c @@ -973,9 +973,7 @@ static const struct internalvar_funcs probe_funcs = std::vector<const static_probe_ops *> all_static_probe_ops; -void _initialize_probe (); -void -_initialize_probe () +INIT_GDB_FILE (probe) { all_static_probe_ops.push_back (&any_static_probe_ops); diff --git a/gdb/proc-api.c b/gdb/proc-api.c index 7a45ba9..f3d4e14 100644 --- a/gdb/proc-api.c +++ b/gdb/proc-api.c @@ -413,9 +413,7 @@ proc_prettyfprint_status (long flags, int why, int what, int thread) } } -void _initialize_proc_api (); -void -_initialize_proc_api () +INIT_GDB_FILE (proc_api) { add_setshow_boolean_cmd ("procfs-trace", no_class, &procfs_trace, _("\ Set tracing for /proc api calls."), _("\ diff --git a/gdb/proc-events.c b/gdb/proc-events.c index 23af639..c6ed1f4 100644 --- a/gdb/proc-events.c +++ b/gdb/proc-events.c @@ -759,9 +759,7 @@ proc_prettyprint_actionset (struct sigaction *actions, int verbose) { } -void _initialize_proc_events (); -void -_initialize_proc_events () +INIT_GDB_FILE (proc_events) { init_syscall_table (); } diff --git a/gdb/proc-service.c b/gdb/proc-service.c index af92335..4f2be0f 100644 --- a/gdb/proc-service.c +++ b/gdb/proc-service.c @@ -206,9 +206,7 @@ ps_getpid (struct ps_prochandle *ph) return ph->thread->ptid.pid (); } -void _initialize_proc_service (); -void -_initialize_proc_service () +INIT_GDB_FILE (proc_service) { /* This function solely exists to make sure this module is linked into the final binary. */ diff --git a/gdb/procfs.c b/gdb/procfs.c index 76a6168..a10574a 100644 --- a/gdb/procfs.c +++ b/gdb/procfs.c @@ -3447,9 +3447,7 @@ proc_untrace_sysexit_cmd (const char *args, int from_tty) proc_trace_syscalls (args, from_tty, PR_SYSEXIT, FLAG_RESET); } -void _initialize_procfs (); -void -_initialize_procfs () +INIT_GDB_FILE (procfs) { add_com ("proc-trace-entry", no_class, proc_trace_sysentry_cmd, _("Give a trace of entries into the syscall.")); @@ -3550,21 +3548,17 @@ procfs_corefile_thread_callback (procinfo *pi, procinfo *thread, void *data) return 0; } -static int -find_signalled_thread (struct thread_info *info, void *data) +static bool +find_signalled_thread (struct thread_info *info) { - if (info->stop_signal () != GDB_SIGNAL_0 - && info->ptid.pid () == inferior_ptid.pid ()) - return 1; - - return 0; + return (info->stop_signal () != GDB_SIGNAL_0 + && info->ptid.pid () == inferior_ptid.pid ()); } static enum gdb_signal find_stop_signal (void) { - struct thread_info *info = - iterate_over_threads (find_signalled_thread, NULL); + struct thread_info *info = iterate_over_threads (find_signalled_thread); if (info) return info->stop_signal (); diff --git a/gdb/producer.c b/gdb/producer.c index d8cbded..5d754fa 100644 --- a/gdb/producer.c +++ b/gdb/producer.c @@ -335,9 +335,7 @@ Version 18.0 Beta"; } #endif -void _initialize_producer (); -void -_initialize_producer () +INIT_GDB_FILE (producer) { #if defined GDB_SELF_TEST selftests::register_test diff --git a/gdb/progspace.c b/gdb/progspace.c index eda6379..1c27165 100644 --- a/gdb/progspace.c +++ b/gdb/progspace.c @@ -21,7 +21,6 @@ #include "objfiles.h" #include "gdbcore.h" #include "solib.h" -#include "solist.h" #include "gdbthread.h" #include "inferior.h" #include <algorithm> diff --git a/gdb/progspace.h b/gdb/progspace.h index 1ae826d..a761e62 100644 --- a/gdb/progspace.h +++ b/gdb/progspace.h @@ -21,12 +21,13 @@ #ifndef GDB_PROGSPACE_H #define GDB_PROGSPACE_H +#include "solib.h" #include "target.h" #include "gdb_bfd.h" #include "registry.h" -#include "solist.h" #include "gdbsupport/safe-iterator.h" #include "gdbsupport/intrusive_list.h" +#include "gdbsupport/owning_intrusive_list.h" #include "gdbsupport/refcounted-object.h" #include "gdbsupport/gdb_ref_ptr.h" #include <vector> @@ -231,9 +232,30 @@ struct program_space is outside all objfiles in this progspace. */ struct objfile *objfile_for_address (CORE_ADDR address); - /* Return the list of all the solibs in this program space. */ + /* Set this program space's solib provider. + + The solib provider must be unset prior to calling this method. */ + void set_solib_ops (solib_ops_up ops) + { + gdb_assert (m_solib_ops == nullptr); + m_solib_ops = std::move (ops); + }; + + /* Unset and free this program space's solib provider. */ + void unset_solib_ops () + { m_solib_ops = nullptr; } + + /* Unset and return this program space's solib provider. */ + solib_ops_up release_solib_ops () + { return std::move (m_solib_ops); } + + /* Get this program space's solib provider. */ + const struct solib_ops *solib_ops () const + { return m_solib_ops.get (); } + + /* Return the list of all the solibs in this program space. */ owning_intrusive_list<solib> &solibs () - { return so_list; } + { return m_solib_list; } /* Similar to `bfd_get_filename (exec_bfd ())` but in original form given by user, without symbolic links and pathname resolved. It is not nullptr @@ -337,10 +359,6 @@ struct program_space (e.g. the argument to the "symbol-file" or "file" command). */ struct objfile *symfile_object_file = NULL; - /* List of shared objects mapped into this space. Managed by - solib.c. */ - owning_intrusive_list<solib> so_list; - /* Number of calls to solib_add. */ unsigned int solib_add_generation = 0; @@ -359,6 +377,13 @@ private: /* All known objfiles are kept in a linked list. */ owning_intrusive_list<objfile> m_objfiles_list; + /* solib_ops implementation used to provide solibs in this program space. */ + solib_ops_up m_solib_ops; + + /* List of shared objects mapped into this space. Managed by + solib.c. */ + owning_intrusive_list<solib> m_solib_list; + /* The set of target sections matching the sections mapped into this program space. Managed by both exec_ops and solib.c. */ std::vector<target_section> m_target_sections; diff --git a/gdb/psymtab.c b/gdb/psymtab.c index 986ef44..c19e4f2 100644 --- a/gdb/psymtab.c +++ b/gdb/psymtab.c @@ -228,7 +228,7 @@ find_pc_sect_psymbol (struct objfile *objfile, for (const partial_symbol *p : psymtab->global_psymbols) { if (p->domain == VAR_DOMAIN - && p->aclass == LOC_BLOCK + && p->loc_class == LOC_BLOCK && pc >= p->address (objfile) && (p->address (objfile) > best_pc || (psymtab->text_low (objfile) == 0 @@ -248,7 +248,7 @@ find_pc_sect_psymbol (struct objfile *objfile, for (const partial_symbol *p : psymtab->static_psymbols) { if (p->domain == VAR_DOMAIN - && p->aclass == LOC_BLOCK + && p->loc_class == LOC_BLOCK && pc >= p->address (objfile) && (p->address (objfile) > best_pc || (psymtab->text_low (objfile) == 0 @@ -537,7 +537,7 @@ print_partial_symbols (struct gdbarch *gdbarch, struct objfile *objfile, gdb_puts ("<invalid domain>, ", outfile); break; } - switch (p->aclass) + switch (p->loc_class) { case LOC_UNDEF: gdb_puts ("undefined", outfile); @@ -1022,12 +1022,12 @@ psymbol_bcache::hash (const void *addr, int length) struct partial_symbol *psymbol = (struct partial_symbol *) addr; unsigned int lang = psymbol->ginfo.language (); unsigned int domain = psymbol->domain; - unsigned int theclass = psymbol->aclass; + unsigned int loc_class = psymbol->loc_class; h = fast_hash (&psymbol->ginfo.m_value, sizeof (psymbol->ginfo.m_value), h); h = fast_hash (&lang, sizeof (unsigned int), h); h = fast_hash (&domain, sizeof (unsigned int), h); - h = fast_hash (&theclass, sizeof (unsigned int), h); + h = fast_hash (&loc_class, sizeof (unsigned int), h); /* Note that psymbol names are interned via compute_and_set_names, so there's no need to hash the contents of the name here. */ h = fast_hash (&psymbol->ginfo.m_name, sizeof (psymbol->ginfo.m_name), h); @@ -1047,7 +1047,7 @@ psymbol_bcache::compare (const void *addr1, const void *addr2, int length) sizeof (sym1->ginfo.m_value)) == 0 && sym1->ginfo.language () == sym2->ginfo.language () && sym1->domain == sym2->domain - && sym1->aclass == sym2->aclass + && sym1->loc_class == sym2->loc_class /* Note that psymbol names are interned via compute_and_set_names, so there's no need to compare the contents of the name here. */ @@ -1085,7 +1085,7 @@ partial_symtab::add_psymbol (const partial_symbol &psymbol, void partial_symtab::add_psymbol (std::string_view name, bool copy_name, domain_enum domain, - enum address_class theclass, + location_class loc_class, int section, psymbol_placement where, unrelocated_addr coreaddr, @@ -1099,7 +1099,7 @@ partial_symtab::add_psymbol (std::string_view name, bool copy_name, psymbol.set_unrelocated_address (coreaddr); psymbol.ginfo.set_section_index (section); psymbol.domain = domain; - psymbol.aclass = theclass; + psymbol.loc_class = loc_class; psymbol.ginfo.set_language (language, partial_symtabs->obstack ()); psymbol.ginfo.compute_and_set_names (name, copy_name, objfile->per_bfd); @@ -1498,7 +1498,7 @@ maintenance_check_psymtabs (const char *ignore, int from_tty) { /* Skip symbols for inlined functions without address. These may or may not have a match in the full symtab. */ - if (psym->aclass == LOC_BLOCK + if (psym->loc_class == LOC_BLOCK && psym->ginfo.value_address () == 0) continue; @@ -1552,9 +1552,7 @@ maintenance_check_psymtabs (const char *ignore, int from_tty) } } -void _initialize_psymtab (); -void -_initialize_psymtab () +INIT_GDB_FILE (psymtab) { add_cmd ("psymbols", class_maintenance, maintenance_print_psymbols, _("\ Print dump of current partial symbol definitions.\n\ diff --git a/gdb/psymtab.h b/gdb/psymtab.h index ad0b2ff..6e1a019 100644 --- a/gdb/psymtab.h +++ b/gdb/psymtab.h @@ -184,10 +184,10 @@ struct partial_symbol ENUM_BITFIELD(domain_enum) domain : SYMBOL_DOMAIN_BITS; /* Address class (for info_symbols). Note that we don't allow - synthetic "aclass" values here at present, simply because there's + synthetic "loc_class" values here at present, simply because there's no need. */ - ENUM_BITFIELD(address_class) aclass : SYMBOL_ACLASS_BITS; + ENUM_BITFIELD(location_class) loc_class : SYMBOL_LOC_CLASS_BITS; }; /* A convenience enum to give names to some constants used when @@ -333,7 +333,7 @@ struct partial_symtab If COPY_NAME is true, make a copy of NAME, otherwise use the passed reference. - THECLASS is the type of symbol. + LOC_CLASS is the type of symbol. SECTION is the index of the section of OBJFILE in which the symbol is found. @@ -348,7 +348,7 @@ struct partial_symtab void add_psymbol (std::string_view name, bool copy_name, domain_enum domain, - enum address_class theclass, + location_class loc_class, int section, psymbol_placement where, unrelocated_addr coreaddr, diff --git a/gdb/python/lib/gdb/__init__.py b/gdb/python/lib/gdb/__init__.py index 4ea5d06..cedd897 100644 --- a/gdb/python/lib/gdb/__init__.py +++ b/gdb/python/lib/gdb/__init__.py @@ -19,17 +19,22 @@ import sys import threading import traceback from contextlib import contextmanager +from importlib import reload -# Python 3 moved "reload" -if sys.version_info >= (3, 4): - from importlib import reload -else: - from imp import reload - -import _gdb - +# The star import imports _gdb names. When the names are used locally, they +# trigger F405 warnings unless added to the explicit import list. # Note that two indicators are needed here to silence flake8. from _gdb import * # noqa: F401,F403 +from _gdb import ( + STDERR, + STDOUT, + Command, + execute, + flush, + parameter, + selected_inferior, + write, +) # isort: split @@ -60,14 +65,14 @@ class _GdbFile(object): self.write(line) def flush(self): - _gdb.flush(stream=self.stream) + flush(stream=self.stream) def write(self, s): - _gdb.write(s, stream=self.stream) + write(s, stream=self.stream) -sys.stdout = _GdbFile(_gdb.STDOUT) -sys.stderr = _GdbFile(_gdb.STDERR) +sys.stdout = _GdbFile(STDOUT) +sys.stderr = _GdbFile(STDERR) # Default prompt hook does nothing. prompt_hook = None @@ -189,7 +194,7 @@ def GdbSetPythonDirectory(dir): def current_progspace(): "Return the current Progspace." - return _gdb.selected_inferior().progspace + return selected_inferior().progspace def objfiles(): @@ -226,14 +231,14 @@ def set_parameter(name, value): value = "on" else: value = "off" - _gdb.execute("set " + name + " " + str(value), to_string=True) + execute("set " + name + " " + str(value), to_string=True) @contextmanager def with_parameter(name, value): """Temporarily set the GDB parameter NAME to VALUE. Note that this is a context manager.""" - old_value = _gdb.parameter(name) + old_value = parameter(name) set_parameter(name, value) try: # Nothing that useful to return. @@ -392,3 +397,121 @@ def _handle_missing_objfile(pspace, buildid, filename): return _handle_missing_files( pspace, "objfile", lambda h: h(pspace, buildid, filename) ) + + +class ParameterPrefix: + # A wrapper around gdb.Command for creating set/show prefixes. + # + # When creating a gdb.Parameter sub-classes, it is sometimes necessary + # to first create a gdb.Command object in order to create the needed + # command prefix. However, for parameters, we actually need two + # prefixes, a 'set' prefix, and a 'show' prefix. With this helper + # class, a single instance of this class will create both prefixes at + # once. + # + # It is important that this class-level documentation not be a __doc__ + # string. Users are expected to sub-class this ParameterPrefix class + # and add their own documentation. If they don't, then GDB will + # generate a suitable doc string. But, if this (parent) class has a + # __doc__ string of its own, then sub-classes will inherit that __doc__ + # string, and GDB will not understand that it needs to generate one. + + class _PrefixCommand(Command): + """A gdb.Command used to implement both the set and show prefixes. + + This documentation string is not used as the prefix command + documentation as it is overridden in the __init__ method below.""" + + # This private method is connected to the 'invoke' attribute within + # this _PrefixCommand object if the containing ParameterPrefix + # object has an invoke_set or invoke_show method. + # + # This method records within self.__delegate which _PrefixCommand + # object is currently active, and then calls the correct invoke + # method on the delegat object (the ParameterPrefix sub-class + # object). + # + # Recording the currently active _PrefixCommand object is important; + # if from the invoke method the user calls dont_repeat, then this is + # forwarded to the currently active _PrefixCommand object. + def __invoke(self, args, from_tty): + + # A helper class for use as part of a Python 'with' block. + # Records which gdb.Command object is currently running its + # invoke method. + class MarkActiveCallback: + # The CMD is a _PrefixCommand object, and the DELEGATE is + # the ParameterPrefix class, or sub-class object. At this + # point we simple record both of these within the + # MarkActiveCallback object. + def __init__(self, cmd, delegate): + self.__cmd = cmd + self.__delegate = delegate + + # Record the currently active _PrefixCommand object within + # the outer ParameterPrefix sub-class object. + def __enter__(self): + self.__delegate.active_prefix = self.__cmd + + # Once the invoke method has completed, then clear the + # _PrefixCommand object that was stored into the outer + # ParameterPrefix sub-class object. + def __exit__(self, exception_type, exception_value, traceback): + self.__delegate.active_prefix = None + + # The self.__cb attribute is set when the _PrefixCommand object + # is created, and is either invoke_set or invoke_show within the + # ParameterPrefix sub-class object. + assert callable(self.__cb) + + # Record the currently active _PrefixCommand object within the + # ParameterPrefix sub-class object, then call the relevant + # invoke method within the ParameterPrefix sub-class object. + with MarkActiveCallback(self, self.__delegate): + self.__cb(args, from_tty) + + @staticmethod + def __find_callback(delegate, mode): + """The MODE is either 'set' or 'show'. Look for an invoke_MODE method + on DELEGATE, if a suitable method is found, then return it, otherwise, + return None. + """ + cb = getattr(delegate, "invoke_" + mode, None) + if callable(cb): + return cb + return None + + def __init__(self, mode, name, cmd_class, delegate, doc=None): + """Setup this gdb.Command. Mode is a string, either 'set' or 'show'. + NAME is the name for this prefix command, that is, the + words that appear after both 'set' and 'show' in the + command name. CMD_CLASS is the usual enum. And DELEGATE + is the gdb.ParameterPrefix object this prefix is part of. + """ + assert mode == "set" or mode == "show" + if doc is None: + self.__doc__ = delegate.__doc__ + else: + self.__doc__ = doc + self.__cb = self.__find_callback(delegate, mode) + self.__delegate = delegate + if self.__cb is not None: + self.invoke = self.__invoke + super().__init__(mode + " " + name, cmd_class, prefix=True) + + def __init__(self, name, cmd_class, doc=None): + """Create a _PrefixCommand for both the set and show prefix commands. + NAME is the command name without either the leading 'set ' or + 'show ' strings, and CMD_CLASS is the usual enum value. + """ + self.active_prefix = None + self._set_prefix_cmd = self._PrefixCommand("set", name, cmd_class, self, doc) + self._show_prefix_cmd = self._PrefixCommand("show", name, cmd_class, self, doc) + + # When called from within an invoke method the self.active_prefix + # attribute should be set to a gdb.Command sub-class (a _PrefixCommand + # object, see above). Forward the dont_repeat call to this object to + # register the actual command as none repeating. + def dont_repeat(self): + if self.active_prefix is not None: + self.active_prefix.dont_repeat() diff --git a/gdb/python/lib/gdb/dap/breakpoint.py b/gdb/python/lib/gdb/dap/breakpoint.py index 59da120..4d4ca18 100644 --- a/gdb/python/lib/gdb/dap/breakpoint.py +++ b/gdb/python/lib/gdb/dap/breakpoint.py @@ -326,7 +326,7 @@ def _rewrite_fn_breakpoint( } -@request("setFunctionBreakpoints") +@request("setFunctionBreakpoints", expect_stopped=False) @capability("supportsFunctionBreakpoints") def set_fn_breakpoint(*, breakpoints: Sequence, **args): specs = [_rewrite_fn_breakpoint(**bp) for bp in breakpoints] @@ -359,7 +359,7 @@ def _rewrite_insn_breakpoint( } -@request("setInstructionBreakpoints") +@request("setInstructionBreakpoints", expect_stopped=False) @capability("supportsInstructionBreakpoints") def set_insn_breakpoints( *, breakpoints: Sequence, offset: Optional[int] = None, **args @@ -410,7 +410,7 @@ def _rewrite_exception_breakpoint( } -@request("setExceptionBreakpoints") +@request("setExceptionBreakpoints", expect_stopped=False) @capability("supportsExceptionFilterOptions") @capability( "exceptionBreakpointFilters", diff --git a/gdb/python/lib/gdb/dap/completions.py b/gdb/python/lib/gdb/dap/completions.py index 85acc43..e5003ff 100644 --- a/gdb/python/lib/gdb/dap/completions.py +++ b/gdb/python/lib/gdb/dap/completions.py @@ -39,8 +39,11 @@ def completions( line = 1 else: line = import_line(line) - text = text.splitlines()[line - 1] - text = text[: column - 1] + if text: + text = text.splitlines()[line - 1] + text = text[: column - 1] + else: + text = "" mi_result = exec_mi_and_log("-complete", text) result = [] completion = None diff --git a/gdb/python/lib/gdb/dap/evaluate.py b/gdb/python/lib/gdb/dap/evaluate.py index 55538e6..fcbcc99 100644 --- a/gdb/python/lib/gdb/dap/evaluate.py +++ b/gdb/python/lib/gdb/dap/evaluate.py @@ -69,7 +69,7 @@ def _repl(command, frame_id): } -@request("evaluate") +@request("evaluate", defer_events=False) @capability("supportsEvaluateForHovers") @capability("supportsValueFormattingOptions") def eval_request( @@ -110,7 +110,7 @@ def variables( @capability("supportsSetExpression") -@request("setExpression") +@request("setExpression", defer_events=False) def set_expression( *, expression: str, value: str, frameId: Optional[int] = None, format=None, **args ): @@ -126,7 +126,7 @@ def set_expression( @capability("supportsSetVariable") -@request("setVariable") +@request("setVariable", defer_events=False) def set_variable( *, variablesReference: int, name: str, value: str, format=None, **args ): diff --git a/gdb/python/lib/gdb/dap/events.py b/gdb/python/lib/gdb/dap/events.py index 4dc9d65..e8f2655 100644 --- a/gdb/python/lib/gdb/dap/events.py +++ b/gdb/python/lib/gdb/dap/events.py @@ -17,12 +17,12 @@ import gdb from .modules import is_module, make_module from .scopes import set_finish_value -from .server import send_event, send_event_maybe_later +from .server import send_event from .startup import exec_and_log, in_gdb_thread, log # True when the inferior is thought to be running, False otherwise. # This may be accessed from any thread, which can be racy. However, -# this unimportant because this global is only used for the +# this is unimportant because this global is only used for the # 'notStopped' response, which itself is inherently racy. inferior_running = False @@ -240,7 +240,7 @@ def _on_stop(event): else: obj["reason"] = stop_reason_map[event.details["reason"]] _expected_pause = False - send_event_maybe_later("stopped", obj) + send_event("stopped", obj) # This keeps a bit of state between the start of an inferior call and diff --git a/gdb/python/lib/gdb/dap/next.py b/gdb/python/lib/gdb/dap/next.py index ddf4e05..898fff1 100644 --- a/gdb/python/lib/gdb/dap/next.py +++ b/gdb/python/lib/gdb/dap/next.py @@ -16,7 +16,7 @@ import gdb from .events import exec_and_expect_stop -from .server import capability, request, send_gdb, send_gdb_with_response +from .server import capability, request from .startup import in_gdb_thread from .state import set_thread @@ -73,19 +73,14 @@ def step_in( exec_and_expect_stop(cmd) -@request("stepOut", defer_stop_events=True) +@request("stepOut") def step_out(*, threadId: int, singleThread: bool = False, **args): _handle_thread_step(threadId, singleThread, True) exec_and_expect_stop("finish &", propagate_exception=True) -# This is a server-side request because it is funny: it wants to -# 'continue' but also return a result, which precludes using -# response=False. Using 'continue &' would mostly work ok, but this -# yields races when a stop occurs before the response is sent back to -# the client. -@request("continue", on_dap_thread=True) +@request("continue") def continue_request(*, threadId: int, singleThread: bool = False, **args): - locked = send_gdb_with_response(lambda: _handle_thread_step(threadId, singleThread)) - send_gdb(lambda: exec_and_expect_stop("continue")) + locked = _handle_thread_step(threadId, singleThread) + exec_and_expect_stop("continue &") return {"allThreadsContinued": not locked} diff --git a/gdb/python/lib/gdb/dap/server.py b/gdb/python/lib/gdb/dap/server.py index c4fa781..7dab582 100644 --- a/gdb/python/lib/gdb/dap/server.py +++ b/gdb/python/lib/gdb/dap/server.py @@ -74,6 +74,13 @@ class DeferredRequest: self._result = result @in_dap_thread + def defer_events(self): + """Return True if events should be deferred during execution. + + This may be overridden by subclasses.""" + return True + + @in_dap_thread def invoke(self): """Implement the deferred request. @@ -95,7 +102,10 @@ class DeferredRequest: """ with _server.canceller.current_request(self._req): + if self.defer_events(): + _server.set_defer_events() _server.invoke_request(self._req, self._result, self.invoke) + _server.emit_pending_events() # A subclass of Exception that is used solely for reporting that a @@ -230,7 +240,7 @@ class Server: self._out_stream = out_stream self._child_stream = child_stream self._delayed_fns_lock = threading.Lock() - self.defer_stop_events = False + self._defer_events = False self._delayed_fns = [] # This queue accepts JSON objects that are then sent to the # DAP client. Writing is done in a separate thread to avoid @@ -316,7 +326,7 @@ class Server: def _read_inferior_output(self): while True: line = self._child_stream.readline() - self.send_event( + self.send_event_maybe_later( "output", { "category": "stdout", @@ -356,6 +366,17 @@ class Server: self._read_queue.put(None) @in_dap_thread + def emit_pending_events(self): + """Emit any pending events.""" + fns = None + with self._delayed_fns_lock: + fns = self._delayed_fns + self._delayed_fns = [] + self._defer_events = False + for fn in fns: + fn() + + @in_dap_thread def main_loop(self): """The main loop of the DAP server.""" # Before looping, start the thread that writes JSON to the @@ -371,13 +392,7 @@ class Server: req = cmd["seq"] with self.canceller.current_request(req): self._handle_command(cmd) - fns = None - with self._delayed_fns_lock: - fns = self._delayed_fns - self._delayed_fns = [] - self.defer_stop_events = False - for fn in fns: - fn() + self.emit_pending_events() # Got the terminate request. This is handled by the # JSON-writing thread, so that we can ensure that all # responses are flushed to the client before exiting. @@ -386,13 +401,13 @@ class Server: send_gdb("quit") @in_dap_thread - def send_event_later(self, event, body=None): - """Send a DAP event back to the client, but only after the - current request has completed.""" + def set_defer_events(self): + """Defer any events until the current request has completed.""" with self._delayed_fns_lock: - self._delayed_fns.append(lambda: self.send_event(event, body)) + self._defer_events = True - @in_gdb_thread + # Note that this does not need to be run in any particular thread, + # because it uses locks for thread-safety. def send_event_maybe_later(self, event, body=None): """Send a DAP event back to the client, but if a request is in-flight within the dap thread and that request is configured to delay the event, @@ -401,10 +416,10 @@ class Server: with self.canceller.lock: if self.canceller.in_flight_dap_thread: with self._delayed_fns_lock: - if self.defer_stop_events: - self._delayed_fns.append(lambda: self.send_event(event, body)) + if self._defer_events: + self._delayed_fns.append(lambda: self._send_event(event, body)) return - self.send_event(event, body) + self._send_event(event, body) @in_dap_thread def call_function_later(self, fn): @@ -415,7 +430,7 @@ class Server: # Note that this does not need to be run in any particular thread, # because it just creates an object and writes it to a thread-safe # queue. - def send_event(self, event, body=None): + def _send_event(self, event, body=None): """Send an event to the DAP client. EVENT is the name of the event, a string. BODY is the body of the event, an arbitrary object.""" @@ -439,14 +454,6 @@ def send_event(event, body=None): """Send an event to the DAP client. EVENT is the name of the event, a string. BODY is the body of the event, an arbitrary object.""" - _server.send_event(event, body) - - -def send_event_maybe_later(event, body=None): - """Send a DAP event back to the client, but if a request is in-flight - within the dap thread and that request is configured to delay the event, - wait until the response has been sent until the event is sent back to - the client.""" _server.send_event_maybe_later(event, body) @@ -476,7 +483,7 @@ def request( response: bool = True, on_dap_thread: bool = False, expect_stopped: bool = True, - defer_stop_events: bool = False + defer_events: bool = True ): """A decorator for DAP requests. @@ -498,9 +505,9 @@ def request( inferior is running. When EXPECT_STOPPED is False, the request will proceed regardless of the inferior's state. - If DEFER_STOP_EVENTS is True, then make sure any stop events sent - during the request processing are not sent to the client until the - response has been sent. + If DEFER_EVENTS is True, then make sure any events sent during the + request processing are not sent to the client until the response + has been sent. """ # Validate the parameters. @@ -523,26 +530,33 @@ def request( # Verify that the function is run on the correct thread. if on_dap_thread: - cmd = in_dap_thread(func) + check_cmd = in_dap_thread(func) else: func = in_gdb_thread(func) if response: - if defer_stop_events: - if _server is not None: - with _server.delayed_events_lock: - _server.defer_stop_events = True def sync_call(**args): return send_gdb_with_response(lambda: func(**args)) - cmd = sync_call + check_cmd = sync_call else: def non_sync_call(**args): return send_gdb(lambda: func(**args)) - cmd = non_sync_call + check_cmd = non_sync_call + + if defer_events: + + def deferring(**args): + _server.set_defer_events() + return check_cmd(**args) + + cmd = deferring + + else: + cmd = check_cmd # If needed, check that the inferior is not running. This # wrapping is done last, so the check is done first, before @@ -582,7 +596,7 @@ def client_bool_capability(name, default=False): @request("initialize", on_dap_thread=True) def initialize(**args): _server.config = args - _server.send_event_later("initialized") + _server.send_event_maybe_later("initialized") global _lines_start_at_1 _lines_start_at_1 = client_bool_capability("linesStartAt1", True) global _columns_start_at_1 diff --git a/gdb/python/lib/gdb/dap/sources.py b/gdb/python/lib/gdb/dap/sources.py index 625c01f..efcd799 100644 --- a/gdb/python/lib/gdb/dap/sources.py +++ b/gdb/python/lib/gdb/dap/sources.py @@ -64,9 +64,9 @@ def decode_source(source): """Decode a Source object. Finds and returns the filename of a given Source object.""" - if "path" in source: - return source["path"] - if "sourceReference" not in source: + if "sourceReference" not in source or source["sourceReference"] <= 0: + if "path" in source: + return source["path"] raise DAPException("either 'path' or 'sourceReference' must appear in Source") ref = source["sourceReference"] if ref not in _id_map: diff --git a/gdb/python/lib/gdb/dap/threads.py b/gdb/python/lib/gdb/dap/threads.py index c271961..89046a8 100644 --- a/gdb/python/lib/gdb/dap/threads.py +++ b/gdb/python/lib/gdb/dap/threads.py @@ -16,27 +16,32 @@ import gdb from .server import request +from .startup import in_gdb_thread +@in_gdb_thread def _thread_name(thr): if thr.name is not None: return thr.name if thr.details is not None: return thr.details - return None + # Always return a name, as the protocol doesn't allow for nameless + # threads. Use the local thread number here... it doesn't matter + # without multi-inferior but in that case it might make more + # sense. + return f"Thread #{thr.num}" -@request("threads") +@request("threads", expect_stopped=False) def threads(**args): result = [] for thr in gdb.selected_inferior().threads(): - one_result = { - "id": thr.global_num, - } - name = _thread_name(thr) - if name is not None: - one_result["name"] = name - result.append(one_result) + result.append( + { + "id": thr.global_num, + "name": _thread_name(thr), + } + ) return { "threads": result, } diff --git a/gdb/python/lib/gdb/dap/varref.py b/gdb/python/lib/gdb/dap/varref.py index 8a13c51..1b54fe7 100644 --- a/gdb/python/lib/gdb/dap/varref.py +++ b/gdb/python/lib/gdb/dap/varref.py @@ -146,6 +146,10 @@ class BaseReference(ABC): if self._children is None: self._children = [None] * self.child_count() for idx in range(start, start + count): + if idx >= len(self._children): + raise DAPException( + f"requested child {idx} outside range of variable {self._ref}" + ) if self._children[idx] is None: (name, value) = self.fetch_one_child(idx) name = self._compute_name(name) diff --git a/gdb/python/lib/gdb/printing.py b/gdb/python/lib/gdb/printing.py index cba27d2..cda033f 100644 --- a/gdb/python/lib/gdb/printing.py +++ b/gdb/python/lib/gdb/printing.py @@ -415,11 +415,17 @@ def make_visualizer(value): result = NoOpArrayPrinter(ty, value) elif ty.code in (gdb.TYPE_CODE_STRUCT, gdb.TYPE_CODE_UNION): result = NoOpStructPrinter(ty, value) - elif ty.code in ( - gdb.TYPE_CODE_PTR, - gdb.TYPE_CODE_REF, - gdb.TYPE_CODE_RVALUE_REF, + elif ( + ty.code + in ( + gdb.TYPE_CODE_PTR, + gdb.TYPE_CODE_REF, + gdb.TYPE_CODE_RVALUE_REF, + ) + and ty.target().code != gdb.TYPE_CODE_VOID ): + # Note we avoid "void *" here because those pointers can't + # be dereferenced without a cast. result = NoOpPointerReferencePrinter(value) else: result = NoOpScalarPrinter(value) diff --git a/gdb/python/py-breakpoint.c b/gdb/python/py-breakpoint.c index 58998f5..9ce8671 100644 --- a/gdb/python/py-breakpoint.c +++ b/gdb/python/py-breakpoint.c @@ -1537,9 +1537,7 @@ PyTypeObject breakpoint_object_type = 0, /* tp_alloc */ }; -void _initialize_py_breakpoint (); -void -_initialize_py_breakpoint () +INIT_GDB_FILE (py_breakpoint) { add_setshow_boolean_cmd ("py-breakpoint", class_maintenance, &pybp_debug, diff --git a/gdb/python/py-cmd.c b/gdb/python/py-cmd.c index 5d98d03..dc5e270 100644 --- a/gdb/python/py-cmd.c +++ b/gdb/python/py-cmd.c @@ -105,19 +105,17 @@ cmdpy_function (const char *args, int from_tty, cmd_list_element *command) gdbpy_enter enter_py; - if (! obj) + if (obj == nullptr) error (_("Invalid invocation of Python command object.")); - if (! PyObject_HasAttr ((PyObject *) obj, invoke_cst)) - { - if (obj->command->is_prefix ()) - { - /* A prefix command does not need an invoke method. */ - return; - } - error (_("Python command object missing 'invoke' method.")); - } - if (! args) + /* If we get here for a prefix command then the prefix command had an + 'invoke' method when it was created. If the 'invoke' method is now + missing, then the user has done something weird (like deleting the + invoke method, yuck!). */ + if (!PyObject_HasAttr ((PyObject *) obj, invoke_cst)) + error (_("Python command object missing 'invoke' method.")); + + if (args == nullptr) args = ""; gdbpy_ref<> argobj (PyUnicode_Decode (args, strlen (args), host_charset (), NULL)); @@ -336,24 +334,30 @@ cmdpy_completer (struct cmd_list_element *command, name of the new command. All earlier words must be existing prefix commands. - *BASE_LIST is set to the final prefix command's list of - *sub-commands. + *BASE_LIST is set to the final prefix command's list of sub-commands. START_LIST is the list in which the search starts. + When PREFIX_CMD is not NULL then *PREFIX_CMD is set to the prefix + command itself, or NULL, if there is no prefix command. + This function returns the name of the new command. On error sets the Python error and returns NULL. */ gdb::unique_xmalloc_ptr<char> gdbpy_parse_command_name (const char *name, struct cmd_list_element ***base_list, - struct cmd_list_element **start_list) + struct cmd_list_element **start_list, + struct cmd_list_element **prefix_cmd) { struct cmd_list_element *elt; int len = strlen (name); int i, lastchar; const char *prefix_text2; + if (prefix_cmd != nullptr) + *prefix_cmd = nullptr; + /* Skip trailing whitespace. */ for (i = len - 1; i >= 0 && (name[i] == ' ' || name[i] == '\t'); --i) ; @@ -368,9 +372,8 @@ gdbpy_parse_command_name (const char *name, for (; i > 0 && valid_cmd_char_p (name[i - 1]); --i) ; - gdb::unique_xmalloc_ptr<char> result ((char *) xmalloc (lastchar - i + 2)); - memcpy (result.get (), &name[i], lastchar - i + 1); - result.get ()[lastchar - i + 1] = '\0'; + gdb::unique_xmalloc_ptr<char> result + = make_unique_xstrndup (&name[i], lastchar - i + 1); /* Skip whitespace again. */ for (--i; i >= 0 && (name[i] == ' ' || name[i] == '\t'); --i) @@ -385,7 +388,7 @@ gdbpy_parse_command_name (const char *name, prefix_text2 = prefix_text.c_str (); elt = lookup_cmd_1 (&prefix_text2, *start_list, NULL, NULL, 1); - if (elt == NULL || elt == CMD_LIST_AMBIGUOUS) + if (elt == nullptr || elt == CMD_LIST_AMBIGUOUS || *prefix_text2 != '\0') { PyErr_Format (PyExc_RuntimeError, _("Could not find command prefix %s."), prefix_text.c_str ()); @@ -395,6 +398,8 @@ gdbpy_parse_command_name (const char *name, if (elt->is_prefix ()) { *base_list = elt->subcommands; + if (prefix_cmd != nullptr) + *prefix_cmd = elt; return result; } @@ -469,8 +474,9 @@ cmdpy_init (PyObject *self, PyObject *args, PyObject *kw) return -1; } + cmd_list_element *prefix_cmd = nullptr; gdb::unique_xmalloc_ptr<char> cmd_name - = gdbpy_parse_command_name (name, &cmd_list, &cmdlist); + = gdbpy_parse_command_name (name, &cmd_list, &cmdlist, &prefix_cmd); if (cmd_name == nullptr) return -1; @@ -507,26 +513,64 @@ cmdpy_init (PyObject *self, PyObject *args, PyObject *kw) if (is_prefix) { - int allow_unknown; - - /* If we have our own "invoke" method, then allow unknown - sub-commands. */ - allow_unknown = PyObject_HasAttr (self, invoke_cst); - cmd = add_prefix_cmd (cmd_name.get (), - (enum command_class) cmdtype, - NULL, docstring.release (), &obj->sub_list, - allow_unknown, cmd_list); + bool has_invoke = PyObject_HasAttr (self, invoke_cst) == 1; + if (has_invoke) + { + /* If there's an 'invoke' method, then create the prefix + command, but call cmdpy_function to dispatch to the invoke + method when the user runs the prefix with no sub-command. */ + cmd = add_prefix_cmd (cmd_name.get (), + (enum command_class) cmdtype, + nullptr, + docstring.release (), &obj->sub_list, + 1 /* allow_unknown */, cmd_list); + cmd->func = cmdpy_function; + } + else + { + /* If there is no 'invoke' method, then create the prefix + using the standard prefix callbacks. This means that for + 'set prefix' the user will get the help text listing all + of the sub-commands, and for 'show prefix', the user will + see all of the sub-command values. */ + if (prefix_cmd != nullptr) + { + while (prefix_cmd->prefix != nullptr) + prefix_cmd = prefix_cmd->prefix; + } + + bool is_show = (prefix_cmd != nullptr + && prefix_cmd->subcommands == &showlist); + + if (is_show) + cmd = add_show_prefix_cmd (cmd_name.get (), + (enum command_class) cmdtype, + docstring.release (), + &obj->sub_list, + 0 /* allow_unknown */, cmd_list); + else + cmd = add_basic_prefix_cmd (cmd_name.get (), + (enum command_class) cmdtype, + docstring.release (), + &obj->sub_list, + 0 /* allow_unknown */, cmd_list); + } } else - cmd = add_cmd (cmd_name.get (), (enum command_class) cmdtype, - docstring.release (), cmd_list); + { + /* For non-prefix commands, arrange to call cmdpy_function, which + invokes the Python 'invoke' method, or raises an exception if + the 'invoke' method is missing. */ + cmd = add_cmd (cmd_name.get (), (enum command_class) cmdtype, + docstring.release (), cmd_list); + cmd->func = cmdpy_function; + } /* If successful, the above takes ownership of the name, since we set name_allocated, so release it. */ cmd_name.release (); - /* There appears to be no API to set this. */ - cmd->func = cmdpy_function; + /* There appears to be no API to set these member variables. */ cmd->destroyer = cmdpy_destroyer; cmd->doc_allocated = 1; cmd->name_allocated = 1; diff --git a/gdb/python/py-connection.c b/gdb/python/py-connection.c index 93757ac..a6d9ad0 100644 --- a/gdb/python/py-connection.c +++ b/gdb/python/py-connection.c @@ -428,9 +428,7 @@ connpy_send_packet (PyObject *self, PyObject *args, PyObject *kw) /* Global initialization for this file. */ -void _initialize_py_connection (); -void -_initialize_py_connection () +INIT_GDB_FILE (py_connection) { gdb::observers::connection_removed.attach (connpy_connection_removed, "py-connection"); diff --git a/gdb/python/py-dap.c b/gdb/python/py-dap.c index 7196d6c..9a9875a 100644 --- a/gdb/python/py-dap.c +++ b/gdb/python/py-dap.c @@ -110,9 +110,7 @@ dap_interp::pre_command_loop () call_dap_fn ("pre_command_loop"); } -void _initialize_py_interp (); -void -_initialize_py_interp () +INIT_GDB_FILE (py_interp) { /* The dap code uses module typing, available starting python 3.5. */ #if PY_VERSION_HEX >= 0x03050000 diff --git a/gdb/python/py-finishbreakpoint.c b/gdb/python/py-finishbreakpoint.c index 0ea629f..70e1684 100644 --- a/gdb/python/py-finishbreakpoint.c +++ b/gdb/python/py-finishbreakpoint.c @@ -175,7 +175,7 @@ bpfinishpy_init (PyObject *self, PyObject *args, PyObject *kwargs) struct frame_id frame_id; PyObject *internal = NULL; int internal_bp = 0; - CORE_ADDR pc; + std::optional<CORE_ADDR> pc; if (!gdb_PyArg_ParseTupleAndKeywords (args, kwargs, "|OO", keywords, &frame_obj, &internal)) @@ -249,9 +249,9 @@ bpfinishpy_init (PyObject *self, PyObject *args, PyObject *kwargs) try { - if (get_frame_pc_if_available (frame, &pc)) + if ((pc = get_frame_pc_if_available (frame))) { - struct symbol *function = find_pc_function (pc); + struct symbol *function = find_pc_function (*pc); if (function != nullptr) { struct type *ret_type = diff --git a/gdb/python/py-framefilter.c b/gdb/python/py-framefilter.c index adf4233..db8c274 100644 --- a/gdb/python/py-framefilter.c +++ b/gdb/python/py-framefilter.c @@ -168,7 +168,7 @@ mi_should_print (struct symbol *sym, enum mi_print_types type) { int print_me = 0; - switch (sym->aclass ()) + switch (sym->loc_class ()) { default: case LOC_UNDEF: /* catches errors */ diff --git a/gdb/python/py-gdb-readline.c b/gdb/python/py-gdb-readline.c index ea3a385..70ceebb 100644 --- a/gdb/python/py-gdb-readline.c +++ b/gdb/python/py-gdb-readline.c @@ -29,11 +29,7 @@ static char * gdbpy_readline_wrapper (FILE *sys_stdin, FILE *sys_stdout, -#if PY_MAJOR_VERSION == 3 && PY_MINOR_VERSION >= 4 const char *prompt) -#else - char *prompt) -#endif { int n; const char *p = NULL; diff --git a/gdb/python/py-micmd.c b/gdb/python/py-micmd.c index e4f07c9..72f427f 100644 --- a/gdb/python/py-micmd.c +++ b/gdb/python/py-micmd.c @@ -578,9 +578,7 @@ PyTypeObject micmdpy_object_type = { 0, /* tp_alloc */ }; -void _initialize_py_micmd (); -void -_initialize_py_micmd () +INIT_GDB_FILE (py_micmd) { add_setshow_boolean_cmd ("py-micmd", class_maintenance, &pymicmd_debug, diff --git a/gdb/python/py-param.c b/gdb/python/py-param.c index 763680e..06237b6 100644 --- a/gdb/python/py-param.c +++ b/gdb/python/py-param.c @@ -495,7 +495,11 @@ get_doc_string (PyObject *object, enum doc_string_type doc_type, } } - if (result == nullptr) + /* For the set/show docs, if these strings are empty then we set then to + a non-empty string. This ensures that the command has some sane + documentation for its 'help' text. */ + if (result == nullptr + || (doc_type != doc_string_description && *result == '\0')) { if (doc_type == doc_string_description) result.reset (xstrdup (_("This command is not documented."))); @@ -904,6 +908,18 @@ parmpy_init (PyObject *self, PyObject *args, PyObject *kwds) show_doc = get_doc_string (self, doc_string_show, name); doc = get_doc_string (self, doc_string_description, cmd_name.get ()); + /* The set/show docs should always be a non-empty string. */ + gdb_assert (set_doc != nullptr && *set_doc != '\0'); + gdb_assert (show_doc != nullptr && *show_doc != '\0'); + + /* For the DOC string only, if it is the empty string, then we convert it + to NULL. This means GDB will not even display a blank line for this + part of the help text, instead the set/show line is all the user will + get. */ + gdb_assert (doc != nullptr); + if (*doc == '\0') + doc = nullptr; + Py_INCREF (self); try diff --git a/gdb/python/py-symbol.c b/gdb/python/py-symbol.c index 3028a30..69062f2 100644 --- a/gdb/python/py-symbol.c +++ b/gdb/python/py-symbol.c @@ -126,7 +126,7 @@ sympy_get_addr_class (PyObject *self, void *closure) SYMPY_REQUIRE_VALID (self, symbol); - return gdb_py_object_from_longest (symbol->aclass ()).release (); + return gdb_py_object_from_longest (symbol->loc_class ()).release (); } /* Implement gdb.Symbol.domain attribute. Return the domain as an @@ -156,42 +156,39 @@ static PyObject * sympy_is_constant (PyObject *self, void *closure) { struct symbol *symbol = NULL; - enum address_class theclass; SYMPY_REQUIRE_VALID (self, symbol); - theclass = symbol->aclass (); + location_class loc_class = symbol->loc_class (); - return PyBool_FromLong (theclass == LOC_CONST || theclass == LOC_CONST_BYTES); + return PyBool_FromLong (loc_class == LOC_CONST || loc_class == LOC_CONST_BYTES); } static PyObject * sympy_is_function (PyObject *self, void *closure) { struct symbol *symbol = NULL; - enum address_class theclass; SYMPY_REQUIRE_VALID (self, symbol); - theclass = symbol->aclass (); + location_class loc_class = symbol->loc_class (); - return PyBool_FromLong (theclass == LOC_BLOCK); + return PyBool_FromLong (loc_class == LOC_BLOCK); } static PyObject * sympy_is_variable (PyObject *self, void *closure) { struct symbol *symbol = NULL; - enum address_class theclass; SYMPY_REQUIRE_VALID (self, symbol); - theclass = symbol->aclass (); + location_class loc_class = symbol->loc_class (); return PyBool_FromLong (!symbol->is_argument () - && (theclass == LOC_LOCAL || theclass == LOC_REGISTER - || theclass == LOC_STATIC || theclass == LOC_COMPUTED - || theclass == LOC_OPTIMIZED_OUT)); + && (loc_class == LOC_LOCAL || loc_class == LOC_REGISTER + || loc_class == LOC_STATIC || loc_class == LOC_COMPUTED + || loc_class == LOC_OPTIMIZED_OUT)); } /* Implementation of Symbol.is_artificial. */ @@ -279,7 +276,7 @@ sympy_value (PyObject *self, PyObject *args) } SYMPY_REQUIRE_VALID (self, symbol); - if (symbol->aclass () == LOC_TYPEDEF) + if (symbol->loc_class () == LOC_TYPEDEF) { PyErr_SetString (PyExc_TypeError, "cannot get the value of a typedef"); return NULL; diff --git a/gdb/python/py-type.c b/gdb/python/py-type.c index f37afde..a2c5939 100644 --- a/gdb/python/py-type.c +++ b/gdb/python/py-type.c @@ -158,7 +158,7 @@ convert_field (struct type *type, int field) } else { - if (type->field (field).loc_kind () == FIELD_LOC_KIND_DWARF_BLOCK) + if (type->field (field).loc_is_dwarf_block ()) arg = gdbpy_ref<>::new_reference (Py_None); else arg = gdb_py_object_from_longest (type->field (field).loc_bitpos ()); @@ -1045,9 +1045,9 @@ typy_template_argument (PyObject *self, PyObject *args) } sym = TYPE_TEMPLATE_ARGUMENT (type, argno); - if (sym->aclass () == LOC_TYPEDEF) + if (sym->loc_class () == LOC_TYPEDEF) return type_to_type_object (sym->type ()); - else if (sym->aclass () == LOC_OPTIMIZED_OUT) + else if (sym->loc_class () == LOC_OPTIMIZED_OUT) { PyErr_Format (PyExc_RuntimeError, _("Template argument is optimized out")); @@ -1312,10 +1312,9 @@ static PyObject * typy_has_key (PyObject *self, PyObject *args) { struct type *type = ((type_object *) self)->type; - const char *field; - int i; + const char *field_name; - if (!PyArg_ParseTuple (args, "s", &field)) + if (!PyArg_ParseTuple (args, "s", &field_name)) return NULL; /* We want just fields of this type, not of base types, so instead of @@ -1326,11 +1325,11 @@ typy_has_key (PyObject *self, PyObject *args) if (type == NULL) return NULL; - for (i = 0; i < type->num_fields (); i++) + for (const auto &field : type->fields ()) { - const char *t_field_name = type->field (i).name (); + const char *t_field_name = field.name (); - if (t_field_name && (strcmp_iw (t_field_name, field) == 0)) + if (t_field_name && (strcmp_iw (t_field_name, field_name) == 0)) Py_RETURN_TRUE; } Py_RETURN_FALSE; diff --git a/gdb/python/py-unwind.c b/gdb/python/py-unwind.c index d43d7e9..dc078ec 100644 --- a/gdb/python/py-unwind.c +++ b/gdb/python/py-unwind.c @@ -1029,9 +1029,7 @@ gdbpy_initialize_unwind (void) return 0; } -void _initialize_py_unwind (); -void -_initialize_py_unwind () +INIT_GDB_FILE (py_unwind) { add_setshow_boolean_cmd ("py-unwind", class_maintenance, &pyuw_debug, diff --git a/gdb/python/python-internal.h b/gdb/python/python-internal.h index 5262d76..7f4237e 100644 --- a/gdb/python/python-internal.h +++ b/gdb/python/python-internal.h @@ -88,6 +88,8 @@ #include <frameobject.h> #include "py-ref.h" +static_assert (PY_VERSION_HEX >= 0x03040000); + #define Py_TPFLAGS_CHECKTYPES 0 /* If Python.h does not define WITH_THREAD, then the various @@ -135,17 +137,6 @@ typedef unsigned long gdb_py_ulongest; #endif /* HAVE_LONG_LONG */ -#if PY_VERSION_HEX < 0x03020000 -typedef long Py_hash_t; -#endif - -/* PyMem_RawMalloc appeared in Python 3.4. For earlier versions, we can just - fall back to PyMem_Malloc. */ - -#if PY_VERSION_HEX < 0x03040000 -#define PyMem_RawMalloc PyMem_Malloc -#endif - /* A template variable holding the format character (as for Py_BuildValue) for a given type. */ template<typename T> @@ -519,7 +510,8 @@ PyObject *gdbpy_string_to_argv (PyObject *self, PyObject *args); PyObject *gdbpy_parameter_value (const setting &var); gdb::unique_xmalloc_ptr<char> gdbpy_parse_command_name (const char *name, struct cmd_list_element ***base_list, - struct cmd_list_element **start_list); + struct cmd_list_element **start_list, + struct cmd_list_element **prefix_cmd = nullptr); PyObject *gdbpy_register_tui_window (PyObject *self, PyObject *args, PyObject *kw); diff --git a/gdb/python/python.c b/gdb/python/python.c index 24cb511..cb0d642 100644 --- a/gdb/python/python.c +++ b/gdb/python/python.c @@ -1630,6 +1630,40 @@ gdbpy_flush (PyObject *self, PyObject *args, PyObject *kw) Py_RETURN_NONE; } +/* Implement gdb.warning(). Takes a single text string argument and emit a + warning using GDB's 'warning' function. The input text string must not + be empty. */ + +static PyObject * +gdbpy_warning (PyObject *self, PyObject *args, PyObject *kw) +{ + const char *text; + static const char *keywords[] = { "text", nullptr }; + + if (!gdb_PyArg_ParseTupleAndKeywords (args, kw, "s", keywords, &text)) + return nullptr; + + if (strlen (text) == 0) + { + PyErr_SetString (PyExc_ValueError, + _("Empty text string passed to gdb.warning")); + return nullptr; + } + + try + { + warning ("%s", text); + } + catch (const gdb_exception &ex) + { + /* The warning() call probably cannot throw an exception. But just + in case it ever does. */ + return gdbpy_handle_gdb_exception (nullptr, ex); + } + + Py_RETURN_NONE; +} + /* Return non-zero if print-stack is not "none". */ int @@ -2446,7 +2480,7 @@ py_initialize () /foo/lib/pythonX.Y/... This must be done before calling Py_Initialize. */ gdb::unique_xmalloc_ptr<char> progname - (concat (ldirname (python_libdir.c_str ()).c_str (), SLASH_STRING, "bin", + (concat (gdb_ldirname (python_libdir.c_str ()).c_str (), SLASH_STRING, "bin", SLASH_STRING, "python", (char *) NULL)); { @@ -2683,9 +2717,7 @@ test_python () /* See python.h. */ cmd_list_element *python_cmd_element = nullptr; -void _initialize_python (); -void -_initialize_python () +INIT_GDB_FILE (python) { cmd_list_element *python_interactive_cmd = add_com ("python-interactive", class_obscure, @@ -3124,6 +3156,12 @@ Return the current print options." }, METH_VARARGS | METH_KEYWORDS, "notify_mi (name, data) -> None\n\ Output async record to MI channels if any." }, + + { "warning", (PyCFunction) gdbpy_warning, + METH_VARARGS | METH_KEYWORDS, + "warning (text) -> None\n\ +Print a warning." }, + {NULL, NULL, 0, NULL} }; diff --git a/gdb/ravenscar-thread.c b/gdb/ravenscar-thread.c index 45205a0..4d79b3d 100644 --- a/gdb/ravenscar-thread.c +++ b/gdb/ravenscar-thread.c @@ -921,9 +921,7 @@ Support for Ravenscar task/thread switching is disabled\n")); /* Module startup initialization function, automagically called by init.c. */ -void _initialize_ravenscar (); -void -_initialize_ravenscar () +INIT_GDB_FILE (ravenscar) { /* Notice when the inferior is created in order to push the ravenscar ops if needed. */ diff --git a/gdb/record-btrace.c b/gdb/record-btrace.c index 2d71b72..d789992 100644 --- a/gdb/record-btrace.c +++ b/gdb/record-btrace.c @@ -132,10 +132,7 @@ public: bool can_execute_reverse () override; bool stopped_by_sw_breakpoint () override; - bool supports_stopped_by_sw_breakpoint () override; - bool stopped_by_hw_breakpoint () override; - bool supports_stopped_by_hw_breakpoint () override; enum exec_direction_kind execution_direction () override; void prepare_to_generate_core () override; @@ -2581,7 +2578,7 @@ record_btrace_maybe_mark_async_event const std::vector<thread_info *> &no_history) { bool more_moving = !moving.empty (); - bool more_no_history = !no_history.empty ();; + bool more_no_history = !no_history.empty (); if (!more_moving && !more_no_history) return; @@ -2773,18 +2770,6 @@ record_btrace_target::stopped_by_sw_breakpoint () return this->beneath ()->stopped_by_sw_breakpoint (); } -/* The supports_stopped_by_sw_breakpoint method of target - record-btrace. */ - -bool -record_btrace_target::supports_stopped_by_sw_breakpoint () -{ - if (record_is_replaying (minus_one_ptid)) - return true; - - return this->beneath ()->supports_stopped_by_sw_breakpoint (); -} - /* The stopped_by_sw_breakpoint method of target record-btrace. */ bool @@ -2800,18 +2785,6 @@ record_btrace_target::stopped_by_hw_breakpoint () return this->beneath ()->stopped_by_hw_breakpoint (); } -/* The supports_stopped_by_hw_breakpoint method of target - record-btrace. */ - -bool -record_btrace_target::supports_stopped_by_hw_breakpoint () -{ - if (record_is_replaying (minus_one_ptid)) - return true; - - return this->beneath ()->supports_stopped_by_hw_breakpoint (); -} - /* The update_thread_list method of target record-btrace. */ void @@ -3213,9 +3186,7 @@ set_record_pt_event_tracing_value (const char *args, int from_tty, /* Initialize btrace commands. */ -void _initialize_record_btrace (); -void -_initialize_record_btrace () +INIT_GDB_FILE (record_btrace) { cmd_list_element *record_btrace_cmd = add_prefix_cmd ("btrace", class_obscure, cmd_record_btrace_start, diff --git a/gdb/record-full.c b/gdb/record-full.c index b52fb06..c55e3b9 100644 --- a/gdb/record-full.c +++ b/gdb/record-full.c @@ -1091,7 +1091,7 @@ record_full_target::resume (ptid_t ptid, int step, enum gdb_signal signal) if (!step) { /* This is not hard single step. */ - if (!gdbarch_software_single_step_p (gdbarch)) + if (!gdbarch_get_next_pcs_p (gdbarch)) { /* This is a normal continue. */ step = 1; @@ -1266,7 +1266,7 @@ record_full_wait_1 (struct target_ops *ops, process_stratum_target *proc_target = current_inferior ()->process_target (); - if (gdbarch_software_single_step_p (gdbarch)) + if (gdbarch_get_next_pcs_p (gdbarch)) { /* Try to insert the software single step breakpoint. If insert success, set step to 0. */ @@ -2877,9 +2877,7 @@ maintenance_print_record_instruction (const char *args, int from_tty) } } -void _initialize_record_full (); -void -_initialize_record_full () +INIT_GDB_FILE (record_full) { struct cmd_list_element *c; diff --git a/gdb/record.c b/gdb/record.c index 440c5e9..248cfaa 100644 --- a/gdb/record.c +++ b/gdb/record.c @@ -769,9 +769,7 @@ set_record_call_history_size (const char *args, int from_tty, &record_call_history_size); } -void _initialize_record (); -void -_initialize_record () +INIT_GDB_FILE (record) { struct cmd_list_element *c; diff --git a/gdb/regcache-dump.c b/gdb/regcache-dump.c index 39dd8c5..c6ef552 100644 --- a/gdb/regcache-dump.c +++ b/gdb/regcache-dump.c @@ -346,9 +346,7 @@ maintenance_print_remote_registers (const char *args, int from_tty) "maintenance print remote-registers"); } -void _initialize_regcache_dump (); -void -_initialize_regcache_dump () +INIT_GDB_FILE (regcache_dump) { add_cmd ("registers", class_maintenance, maintenance_print_registers, _("Print the internal register configuration.\n" diff --git a/gdb/regcache.c b/gdb/regcache.c index e3d435f..9892c54 100644 --- a/gdb/regcache.c +++ b/gdb/regcache.c @@ -2213,9 +2213,7 @@ regcache_thread_ptid_changed () } /* namespace selftests */ #endif /* GDB_SELF_TEST */ -void _initialize_regcache (); -void -_initialize_regcache () +INIT_GDB_FILE (regcache) { struct cmd_list_element *c; diff --git a/gdb/reggroups.c b/gdb/reggroups.c index c931434..596b336 100644 --- a/gdb/reggroups.c +++ b/gdb/reggroups.c @@ -259,9 +259,7 @@ const reggroup *const all_reggroup = &all_group; const reggroup *const save_reggroup = &save_group; const reggroup *const restore_reggroup = &restore_group; -void _initialize_reggroup (); -void -_initialize_reggroup () +INIT_GDB_FILE (reggroup) { add_cmd ("reggroups", class_maintenance, maintenance_print_reggroups, _("\ diff --git a/gdb/remote-notif.c b/gdb/remote-notif.c index 053591c..da1b578 100644 --- a/gdb/remote-notif.c +++ b/gdb/remote-notif.c @@ -234,9 +234,7 @@ remote_notif_state::~remote_notif_state () delete_async_event_handler (&get_pending_events_token); } -void _initialize_notif (); -void -_initialize_notif () +INIT_GDB_FILE (notif) { add_setshow_boolean_cmd ("notification", no_class, ¬if_debug, _("\ diff --git a/gdb/remote-sim.c b/gdb/remote-sim.c index fc2c900..425e50d 100644 --- a/gdb/remote-sim.c +++ b/gdb/remote-sim.c @@ -1284,9 +1284,7 @@ gdbsim_target::memory_map () return result; } -void _initialize_remote_sim (); -void -_initialize_remote_sim () +INIT_GDB_FILE (remote_sim) { struct cmd_list_element *c; diff --git a/gdb/remote.c b/gdb/remote.c index 1c49cdf..7c9950c 100644 --- a/gdb/remote.c +++ b/gdb/remote.c @@ -22,6 +22,7 @@ #include <ctype.h> #include <fcntl.h> #include "exceptions.h" +#include "gdbsupport/common-inferior.h" #include "inferior.h" #include "infrun.h" #include "bfd.h" @@ -251,6 +252,7 @@ enum { PACKET_vFile_readlink, PACKET_vFile_fstat, PACKET_vFile_stat, + PACKET_vFile_lstat, PACKET_qXfer_auxv, PACKET_qXfer_features, PACKET_qXfer_exec_file, @@ -1023,8 +1025,8 @@ public: int fileio_fstat (int fd, struct stat *sb, fileio_error *target_errno) override; - int fileio_stat (struct inferior *inf, const char *filename, - struct stat *sb, fileio_error *target_errno) override; + int fileio_lstat (struct inferior *inf, const char *filename, + struct stat *sb, fileio_error *target_errno) override; int fileio_close (int fd, fileio_error *target_errno) override; @@ -13149,7 +13151,7 @@ remote_target::fileio_readlink (struct inferior *inf, const char *filename, return ret; } -/* Helper function to handle ::fileio_fstat and ::fileio_stat result +/* Helper function to handle ::fileio_fstat and ::fileio_lstat result processing. When this function is called the remote syscall has been performed and we know we didn't get an error back. @@ -13160,10 +13162,10 @@ remote_target::fileio_readlink (struct inferior *inf, const char *filename, data) is to be placed in ST. */ static int -fileio_process_fstat_and_stat_reply (const char *attachment, - int attachment_len, - int expected_len, - struct stat *st) +fileio_process_fstat_and_lstat_reply (const char *attachment, + int attachment_len, + int expected_len, + struct stat *st) { struct fio_stat fst; @@ -13225,15 +13227,15 @@ remote_target::fileio_fstat (int fd, struct stat *st, fileio_error *remote_errno return 0; } - return fileio_process_fstat_and_stat_reply (attachment, attachment_len, - ret, st); + return fileio_process_fstat_and_lstat_reply (attachment, attachment_len, + ret, st); } -/* Implementation of to_fileio_stat. */ +/* Implementation of to_fileio_lstat. */ int -remote_target::fileio_stat (struct inferior *inf, const char *filename, - struct stat *st, fileio_error *remote_errno) +remote_target::fileio_lstat (struct inferior *inf, const char *filename, + struct stat *st, fileio_error *remote_errno) { struct remote_state *rs = get_remote_state (); char *p = rs->buf.data (); @@ -13242,14 +13244,14 @@ remote_target::fileio_stat (struct inferior *inf, const char *filename, if (remote_hostio_set_filesystem (inf, remote_errno) != 0) return {}; - remote_buffer_add_string (&p, &left, "vFile:stat:"); + remote_buffer_add_string (&p, &left, "vFile:lstat:"); remote_buffer_add_bytes (&p, &left, (const gdb_byte *) filename, strlen (filename)); int attachment_len; const char *attachment; - int ret = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_stat, + int ret = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_lstat, remote_errno, &attachment, &attachment_len); @@ -13258,8 +13260,8 @@ remote_target::fileio_stat (struct inferior *inf, const char *filename, if (ret < 0) return ret; - return fileio_process_fstat_and_stat_reply (attachment, attachment_len, - ret, st); + return fileio_process_fstat_and_lstat_reply (attachment, attachment_len, + ret, st); } /* Implementation of to_filesystem_is_local. */ @@ -16161,9 +16163,7 @@ test_packet_check_result () } /* namespace selftests */ #endif /* GDB_SELF_TEST */ -void _initialize_remote (); -void -_initialize_remote () +INIT_GDB_FILE (remote) { add_target (remote_target_info, remote_target::open); add_target (extended_remote_target_info, extended_remote_target::open); @@ -16422,6 +16422,8 @@ Show the maximum size of the address (in bits) in a memory packet."), NULL, add_packet_config_cmd (PACKET_vFile_stat, "vFile:stat", "hostio-stat", 0); + add_packet_config_cmd (PACKET_vFile_lstat, "vFile:lstat", "hostio-lstat", 0); + add_packet_config_cmd (PACKET_vAttach, "vAttach", "attach", 0); add_packet_config_cmd (PACKET_vRun, "vRun", "run", 0); diff --git a/gdb/reverse.c b/gdb/reverse.c index 2c9ed72..dc35bca 100644 --- a/gdb/reverse.c +++ b/gdb/reverse.c @@ -277,9 +277,7 @@ info_bookmarks_command (const char *args, int from_tty) } } -void _initialize_reverse (); -void -_initialize_reverse () +INIT_GDB_FILE (reverse) { cmd_list_element *reverse_step_cmd = add_com ("reverse-step", class_run, reverse_step, _("\ diff --git a/gdb/riscv-fbsd-nat.c b/gdb/riscv-fbsd-nat.c index df7cc6a..2908d9f 100644 --- a/gdb/riscv-fbsd-nat.c +++ b/gdb/riscv-fbsd-nat.c @@ -65,9 +65,7 @@ riscv_fbsd_nat_target::store_registers (struct regcache *regcache, PT_SETFPREGS, &riscv_fbsd_fpregset); } -void _initialize_riscv_fbsd_nat (); -void -_initialize_riscv_fbsd_nat () +INIT_GDB_FILE (riscv_fbsd_nat) { add_inf_child_target (&the_riscv_fbsd_nat_target); } diff --git a/gdb/riscv-fbsd-tdep.c b/gdb/riscv-fbsd-tdep.c index fcb91ca..7999bd3 100644 --- a/gdb/riscv-fbsd-tdep.c +++ b/gdb/riscv-fbsd-tdep.c @@ -189,12 +189,11 @@ riscv_fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Generic FreeBSD support. */ fbsd_init_abi (info, gdbarch); - set_gdbarch_software_single_step (gdbarch, riscv_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, riscv_software_single_step); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - (riscv_isa_xlen (gdbarch) == 4 - ? svr4_ilp32_fetch_link_map_offsets - : svr4_lp64_fetch_link_map_offsets)); + set_solib_svr4_ops (gdbarch, (riscv_isa_xlen (gdbarch) == 4 + ? make_svr4_ilp32_solib_ops + : make_svr4_lp64_solib_ops)); tramp_frame_prepend_unwinder (gdbarch, &riscv_fbsd_sigframe); @@ -207,9 +206,7 @@ riscv_fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) riscv_fbsd_get_thread_local_address); } -void _initialize_riscv_fbsd_tdep (); -void -_initialize_riscv_fbsd_tdep () +INIT_GDB_FILE (riscv_fbsd_tdep) { gdbarch_register_osabi (bfd_arch_riscv, 0, GDB_OSABI_FREEBSD, riscv_fbsd_init_abi); diff --git a/gdb/riscv-linux-nat.c b/gdb/riscv-linux-nat.c index 8846329..89f1ddc 100644 --- a/gdb/riscv-linux-nat.c +++ b/gdb/riscv-linux-nat.c @@ -329,9 +329,7 @@ riscv_linux_nat_target::store_registers (struct regcache *regcache, int regnum) /* Initialize RISC-V Linux native support. */ -void _initialize_riscv_linux_nat (); -void -_initialize_riscv_linux_nat () +INIT_GDB_FILE (riscv_linux_nat) { /* Register the target. */ linux_target = &the_riscv_linux_nat_target; diff --git a/gdb/riscv-linux-tdep.c b/gdb/riscv-linux-tdep.c index e1ea615..982273a 100644 --- a/gdb/riscv-linux-tdep.c +++ b/gdb/riscv-linux-tdep.c @@ -20,6 +20,7 @@ #include "osabi.h" #include "glibc-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "svr4-tls-tdep.h" #include "solib-svr4.h" #include "regset.h" @@ -510,12 +511,11 @@ riscv_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) linux_init_abi (info, gdbarch, 0); - set_gdbarch_software_single_step (gdbarch, riscv_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, riscv_software_single_step); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - (riscv_isa_xlen (gdbarch) == 4 - ? linux_ilp32_fetch_link_map_offsets - : linux_lp64_fetch_link_map_offsets)); + set_solib_svr4_ops (gdbarch, (riscv_isa_xlen (gdbarch) == 4 + ? make_linux_ilp32_svr4_solib_ops + : make_linux_lp64_svr4_solib_ops)); /* GNU/Linux uses SVR4-style shared libraries. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); @@ -544,9 +544,7 @@ riscv_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Initialize RISC-V Linux target support. */ -void _initialize_riscv_linux_tdep (); -void -_initialize_riscv_linux_tdep () +INIT_GDB_FILE (riscv_linux_tdep) { gdbarch_register_osabi (bfd_arch_riscv, 0, GDB_OSABI_LINUX, riscv_linux_init_abi); diff --git a/gdb/riscv-none-tdep.c b/gdb/riscv-none-tdep.c index 7303f54..ad32057 100644 --- a/gdb/riscv-none-tdep.c +++ b/gdb/riscv-none-tdep.c @@ -163,9 +163,7 @@ riscv_none_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Initialize RISC-V bare-metal target support. */ -void _initialize_riscv_none_tdep (); -void -_initialize_riscv_none_tdep () +INIT_GDB_FILE (riscv_none_tdep) { gdbarch_register_osabi (bfd_arch_riscv, 0, GDB_OSABI_NONE, riscv_none_init_abi); diff --git a/gdb/riscv-tdep.c b/gdb/riscv-tdep.c index 8998a29..f5b8523 100644 --- a/gdb/riscv-tdep.c +++ b/gdb/riscv-tdep.c @@ -4163,6 +4163,20 @@ riscv_gnu_triplet_regexp (struct gdbarch *gdbarch) return "riscv(32|64)?"; } +/* Implement the "print_insn" gdbarch method. */ + +static int +riscv_print_insn (bfd_vma addr, struct disassemble_info *info) +{ + /* Initialize the BFD section to enable ISA string detection depending on the + object in scope. */ + struct obj_section *s = find_pc_section (addr); + if (s != nullptr) + info->section = s->the_bfd_section; + + return default_print_insn (addr, info); +} + /* Implementation of `gdbarch_stap_is_single_operand', as defined in gdbarch.h. */ @@ -4429,6 +4443,9 @@ riscv_gdbarch_init (struct gdbarch_info info, disassembler_options_riscv ()); set_gdbarch_disassembler_options (gdbarch, &riscv_disassembler_options); + /* Disassembler print_insn. */ + set_gdbarch_print_insn (gdbarch, riscv_print_insn); + /* SystemTap Support. */ set_gdbarch_stap_is_single_operand (gdbarch, riscv_stap_is_single_operand); set_gdbarch_stap_register_indirection_prefixes @@ -4778,9 +4795,7 @@ riscv_supply_regset (const struct regset *regset, } } -void _initialize_riscv_tdep (); -void -_initialize_riscv_tdep () +INIT_GDB_FILE (riscv_tdep) { riscv_init_reggroups (); @@ -5158,7 +5173,7 @@ private: { return (is_csrrw_insn (ival) || is_csrrs_insn (ival) || is_csrrc_insn (ival) || is_csrrwi_insn (ival) || is_csrrsi_insn (ival) - || is_csrrc_insn (ival)); + || is_csrrci_insn (ival)); } /* Returns true if instruction is classified. This function can set diff --git a/gdb/rl78-tdep.c b/gdb/rl78-tdep.c index f325f41..5c49d1f 100644 --- a/gdb/rl78-tdep.c +++ b/gdb/rl78-tdep.c @@ -1488,9 +1488,7 @@ rl78_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) /* Register the above initialization routine. */ -void _initialize_rl78_tdep (); -void -_initialize_rl78_tdep () +INIT_GDB_FILE (rl78_tdep) { gdbarch_register (bfd_arch_rl78, rl78_gdbarch_init); } diff --git a/gdb/rs6000-aix-nat.c b/gdb/rs6000-aix-nat.c index 225d1b8..213f197 100644 --- a/gdb/rs6000-aix-nat.c +++ b/gdb/rs6000-aix-nat.c @@ -1062,9 +1062,7 @@ rs6000_nat_target::xfer_shared_libraries } } -void _initialize_rs6000_nat (); -void -_initialize_rs6000_nat () +INIT_GDB_FILE (rs6000_nat) { add_inf_child_target (&the_rs6000_nat_target); } diff --git a/gdb/rs6000-aix-tdep.c b/gdb/rs6000-aix-tdep.c index ab9feb3..6322bbc 100644 --- a/gdb/rs6000-aix-tdep.c +++ b/gdb/rs6000-aix-tdep.c @@ -1362,7 +1362,7 @@ rs6000_aix_init_osabi (struct gdbarch_info info, struct gdbarch *gdbarch) ppc_gdbarch_tdep *tdep = gdbarch_tdep<ppc_gdbarch_tdep> (gdbarch); /* RS6000/AIX does not support PT_STEP. Has to be simulated. */ - set_gdbarch_software_single_step (gdbarch, rs6000_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, rs6000_software_single_step); /* Displaced stepping is currently not supported in combination with software single-stepping. These override the values set by @@ -1411,13 +1411,11 @@ rs6000_aix_init_osabi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_wchar_signed (gdbarch, 0); set_gdbarch_auto_wide_charset (gdbarch, rs6000_aix_auto_wide_charset); - set_gdbarch_so_ops (gdbarch, &solib_aix_so_ops); + set_gdbarch_make_solib_ops (gdbarch, make_aix_solib_ops); frame_unwind_append_unwinder (gdbarch, &aix_sighandle_frame_unwind); } -void _initialize_rs6000_aix_tdep (); -void -_initialize_rs6000_aix_tdep () +INIT_GDB_FILE (rs6000_aix_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_rs6000, bfd_target_xcoff_flavour, diff --git a/gdb/rs6000-lynx178-tdep.c b/gdb/rs6000-lynx178-tdep.c index 38af2ac..d0d9a53 100644 --- a/gdb/rs6000-lynx178-tdep.c +++ b/gdb/rs6000-lynx178-tdep.c @@ -407,9 +407,7 @@ rs6000_lynx178_init_osabi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT); } -void _initialize_rs6000_lynx178_tdep (); -void -_initialize_rs6000_lynx178_tdep () +INIT_GDB_FILE (rs6000_lynx178_tdep) { gdbarch_register_osabi_sniffer (bfd_arch_rs6000, bfd_target_xcoff_flavour, diff --git a/gdb/rs6000-tdep.c b/gdb/rs6000-tdep.c index 23ccd92..75079b9 100644 --- a/gdb/rs6000-tdep.c +++ b/gdb/rs6000-tdep.c @@ -8458,7 +8458,7 @@ rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_sofun_address_maybe_missing (gdbarch, 1); /* Handles single stepping of atomic sequences. */ - set_gdbarch_software_single_step (gdbarch, ppc_deal_with_atomic_sequence); + set_gdbarch_get_next_pcs (gdbarch, ppc_deal_with_atomic_sequence); /* Not sure on this. FIXMEmgo */ set_gdbarch_frame_args_skip (gdbarch, 8); @@ -8722,9 +8722,7 @@ ppc_insn_prefix_dform (unsigned int insn1, unsigned int insn2) /* Initialization code. */ -void _initialize_rs6000_tdep (); -void -_initialize_rs6000_tdep () +INIT_GDB_FILE (rs6000_tdep) { gdbarch_register (bfd_arch_rs6000, rs6000_gdbarch_init, rs6000_dump_tdep); gdbarch_register (bfd_arch_powerpc, rs6000_gdbarch_init, rs6000_dump_tdep); diff --git a/gdb/run-on-main-thread.c b/gdb/run-on-main-thread.c index edaab08..bf53163 100644 --- a/gdb/run-on-main-thread.c +++ b/gdb/run-on-main-thread.c @@ -22,6 +22,7 @@ #include <thread> #include <mutex> #endif +#include "gdbsupport/cleanups.h" #include "gdbsupport/event-loop.h" /* The serial event used when posting runnables. */ @@ -130,9 +131,7 @@ is_main_thread () #endif } -void _initialize_run_on_main_thread (); -void -_initialize_run_on_main_thread () +INIT_GDB_FILE (run_on_main_thread) { #if CXX_STD_THREAD /* The variable main_thread_id should be initialized when entering main, or diff --git a/gdb/rust-exp.h b/gdb/rust-exp.h index 73654f6..3185242 100644 --- a/gdb/rust-exp.h +++ b/gdb/rust-exp.h @@ -33,14 +33,6 @@ extern struct value *eval_op_rust_array (struct type *expect_type, enum exp_opcode opcode, struct value *ncopies, struct value *elt); -extern struct value *rust_subscript (struct type *expect_type, - struct expression *exp, - enum noside noside, bool for_addr, - struct value *lhs, struct value *rhs); -extern struct value *rust_range (struct type *expect_type, - struct expression *exp, - enum noside noside, enum range_flag kind, - struct value *low, struct value *high); namespace expr { @@ -75,22 +67,26 @@ public: struct expression *exp, enum noside noside) override { - value *arg1 = std::get<0> (m_storage)->evaluate (nullptr, exp, noside); - value *arg2 = std::get<1> (m_storage)->evaluate (nullptr, exp, noside); - return rust_subscript (expect_type, exp, noside, false, arg1, arg2); + return subscript (exp, noside, false); } value *slice (struct type *expect_type, struct expression *exp, enum noside noside) { - value *arg1 = std::get<0> (m_storage)->evaluate (nullptr, exp, noside); - value *arg2 = std::get<1> (m_storage)->evaluate (nullptr, exp, noside); - return rust_subscript (expect_type, exp, noside, true, arg1, arg2); + return subscript (exp, noside, true); } enum exp_opcode opcode () const override { return BINOP_SUBSCRIPT; } + +private: + + /* Helper function that does the work of evaluation. FOR_ADDR is + true if we're evaluating a slice. */ + value *subscript (struct expression *exp, enum noside noside, + bool for_addr); + }; class rust_unop_addr_operation @@ -126,17 +122,7 @@ public: value *evaluate (struct type *expect_type, struct expression *exp, - enum noside noside) override - { - auto kind = std::get<0> (m_storage); - value *low = nullptr; - if (std::get<1> (m_storage) != nullptr) - low = std::get<1> (m_storage)->evaluate (nullptr, exp, noside); - value *high = nullptr; - if (std::get<2> (m_storage) != nullptr) - high = std::get<2> (m_storage)->evaluate (nullptr, exp, noside); - return rust_range (expect_type, exp, noside, kind, low, high); - } + enum noside noside) override; enum exp_opcode opcode () const override { return OP_RANGE; } diff --git a/gdb/rust-lang.c b/gdb/rust-lang.c index 1bb14db..3605552 100644 --- a/gdb/rust-lang.c +++ b/gdb/rust-lang.c @@ -126,15 +126,15 @@ rust_underscore_fields (struct type *type) if (type->code () != TYPE_CODE_STRUCT) return false; - for (int i = 0; i < type->num_fields (); ++i) + for (const auto &field : type->fields ()) { - if (!type->field (i).is_static ()) + if (!field.is_static ()) { char buf[20]; xsnprintf (buf, sizeof (buf), "%d", field_number); - const char *field_name = type->field (i).name (); + const char *field_name = field.name (); if (startswith (field_name, "__")) field_name += 2; if (strcmp (buf, field_name) != 0) @@ -376,11 +376,11 @@ rust_array_like_element_type (struct type *type) { /* Caller must check this. */ gdb_assert (rust_slice_type_p (type)); - for (int i = 0; i < type->num_fields (); ++i) + for (const auto &field : type->fields ()) { - if (strcmp (type->field (i).name (), "data_ptr") == 0) + if (strcmp (field.name (), "data_ptr") == 0) { - struct type *base_type = type->field (i).type ()->target_type (); + struct type *base_type = field.type ()->target_type (); if (rewrite_slice_type (base_type, nullptr, 0, nullptr)) return nullptr; return base_type; @@ -1017,9 +1017,9 @@ rust_internal_print_type (struct type *type, const char *varstring, } gdb_puts ("{\n", stream); - for (int i = 0; i < type->num_fields (); ++i) + for (const auto &field : type->fields ()) { - const char *name = type->field (i).name (); + const char *name = field.name (); QUIT; @@ -1142,13 +1142,22 @@ rust_slice_type (const char *name, struct type *elt_type, -/* A helper for rust_evaluate_subexp that handles OP_RANGE. */ +namespace expr +{ struct value * -rust_range (struct type *expect_type, struct expression *exp, - enum noside noside, enum range_flag kind, - struct value *low, struct value *high) +rust_range_operation::evaluate (struct type *expect_type, + struct expression *exp, + enum noside noside) { + auto kind = std::get<0> (m_storage); + value *low = nullptr; + if (std::get<1> (m_storage) != nullptr) + low = std::get<1> (m_storage)->evaluate (nullptr, exp, noside); + value *high = nullptr; + if (std::get<2> (m_storage) != nullptr) + high = std::get<2> (m_storage)->evaluate (nullptr, exp, noside); + struct value *addrval, *result; CORE_ADDR addr; struct type *range_type; @@ -1225,6 +1234,8 @@ rust_range (struct type *expect_type, struct expression *exp, return result; } +} /* namespace expr */ + /* A helper function to compute the range and kind given a range value. TYPE is the type of the range value. RANGE is the range value. LOW, HIGH, and KIND are out parameters. The LOW and HIGH @@ -1266,13 +1277,16 @@ rust_compute_range (struct type *type, struct value *range, } } -/* A helper for rust_evaluate_subexp that handles BINOP_SUBSCRIPT. */ +namespace expr +{ struct value * -rust_subscript (struct type *expect_type, struct expression *exp, - enum noside noside, bool for_addr, - struct value *lhs, struct value *rhs) +rust_subscript_operation::subscript (struct expression *exp, + enum noside noside, bool for_addr) { + value *lhs = std::get<0> (m_storage)->evaluate (nullptr, exp, noside); + value *rhs = std::get<1> (m_storage)->evaluate (nullptr, exp, noside); + struct value *result; struct type *rhstype; LONGEST low, high_bound; @@ -1413,9 +1427,6 @@ rust_subscript (struct type *expect_type, struct expression *exp, return result; } -namespace expr -{ - struct value * rust_unop_ind_operation::evaluate (struct type *expect_type, struct expression *exp, diff --git a/gdb/rust-parse.c b/gdb/rust-parse.c index ef64005..7fad148 100644 --- a/gdb/rust-parse.c +++ b/gdb/rust-parse.c @@ -1232,14 +1232,14 @@ rust_parser::name_to_operation (const std::string &name) struct block_symbol sym = lookup_symbol (name.c_str (), pstate->expression_context_block, SEARCH_VFT); - if (sym.symbol != nullptr && sym.symbol->aclass () != LOC_TYPEDEF) + if (sym.symbol != nullptr && sym.symbol->loc_class () != LOC_TYPEDEF) return make_operation<var_value_operation> (sym); struct type *type = nullptr; if (sym.symbol != nullptr) { - gdb_assert (sym.symbol->aclass () == LOC_TYPEDEF); + gdb_assert (sym.symbol->loc_class () == LOC_TYPEDEF); type = sym.symbol->type (); } if (type == nullptr) @@ -2421,9 +2421,7 @@ rust_lex_tests (void) -void _initialize_rust_exp (); -void -_initialize_rust_exp () +INIT_GDB_FILE (rust_exp) { int code = regcomp (&number_regex, number_regex_text, REG_EXTENDED); /* If the regular expression was incorrect, it was a programming diff --git a/gdb/rx-tdep.c b/gdb/rx-tdep.c index f767666..7b110ce 100644 --- a/gdb/rx-tdep.c +++ b/gdb/rx-tdep.c @@ -1063,9 +1063,7 @@ rx_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) /* Register the above initialization routine. */ -void _initialize_rx_tdep (); -void -_initialize_rx_tdep () +INIT_GDB_FILE (rx_tdep) { gdbarch_register (bfd_arch_rx, rx_gdbarch_init); initialize_tdesc_rx (); diff --git a/gdb/s12z-tdep.c b/gdb/s12z-tdep.c index 70f8598..28d5635 100644 --- a/gdb/s12z-tdep.c +++ b/gdb/s12z-tdep.c @@ -662,9 +662,7 @@ s12z_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_s12z_tdep (); -void -_initialize_s12z_tdep () +INIT_GDB_FILE (s12z_tdep) { gdbarch_register (bfd_arch_s12z, s12z_gdbarch_init, NULL); } diff --git a/gdb/s390-linux-nat.c b/gdb/s390-linux-nat.c index d5964e2..5b723b1 100644 --- a/gdb/s390-linux-nat.c +++ b/gdb/s390-linux-nat.c @@ -1051,9 +1051,7 @@ s390_linux_nat_target::read_description () tdesc_s390_linux32); } -void _initialize_s390_nat (); -void -_initialize_s390_nat () +INIT_GDB_FILE (s390_nat) { /* Register the target. */ linux_target = &the_s390_linux_nat_target; diff --git a/gdb/s390-linux-tdep.c b/gdb/s390-linux-tdep.c index bd1f42c..66e571d 100644 --- a/gdb/s390-linux-tdep.c +++ b/gdb/s390-linux-tdep.c @@ -29,6 +29,7 @@ #include "gdbcore.h" #include "linux-record.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "svr4-tls-tdep.h" #include "objfiles.h" #include "osabi.h" @@ -1214,8 +1215,7 @@ s390_linux_init_abi_31 (struct gdbarch_info info, struct gdbarch *gdbarch) s390_linux_init_abi_any (info, gdbarch); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); set_xml_syscall_file_name (gdbarch, XML_SYSCALL_FILENAME_S390); } @@ -1230,14 +1230,11 @@ s390_linux_init_abi_64 (struct gdbarch_info info, struct gdbarch *gdbarch) s390_linux_init_abi_any (info, gdbarch); - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_lp64_svr4_solib_ops); set_xml_syscall_file_name (gdbarch, XML_SYSCALL_FILENAME_S390X); } -void _initialize_s390_linux_tdep (); -void -_initialize_s390_linux_tdep () +INIT_GDB_FILE (s390_linux_tdep) { /* Hook us into the OSABI mechanism. */ gdbarch_register_osabi (bfd_arch_s390, bfd_mach_s390_31, GDB_OSABI_LINUX, diff --git a/gdb/s390-tdep.c b/gdb/s390-tdep.c index a3b7658..c5fa24e 100644 --- a/gdb/s390-tdep.c +++ b/gdb/s390-tdep.c @@ -7300,7 +7300,7 @@ s390_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) s390_displaced_step_copy_insn); set_gdbarch_displaced_step_fixup (gdbarch, s390_displaced_step_fixup); set_gdbarch_displaced_step_hw_singlestep (gdbarch, s390_displaced_step_hw_singlestep); - set_gdbarch_software_single_step (gdbarch, s390_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, s390_software_single_step); set_gdbarch_max_insn_length (gdbarch, S390_MAX_INSTR_SIZE); /* Prologue analysis. */ @@ -7515,9 +7515,7 @@ disassemble_s390x () #endif /* GDB_SELF_TEST */ -void _initialize_s390_tdep (); -void -_initialize_s390_tdep () +INIT_GDB_FILE (s390_tdep) { /* Hook us into the gdbarch mechanism. */ gdbarch_register (bfd_arch_s390, s390_gdbarch_init); diff --git a/gdb/ser-go32.c b/gdb/ser-go32.c index c6b34ab..6e60569 100644 --- a/gdb/ser-go32.c +++ b/gdb/ser-go32.c @@ -914,9 +914,7 @@ info_serial_command (const char *arg, int from_tty) #endif } -void _initialize_ser_dos (); -void -_initialize_ser_dos () +INIT_GDB_FILE (ser_dos) { serial_add_interface (&dos_ops); diff --git a/gdb/ser-mingw.c b/gdb/ser-mingw.c index db733c3..086919a 100644 --- a/gdb/ser-mingw.c +++ b/gdb/ser-mingw.c @@ -1338,9 +1338,7 @@ static const struct serial_ops tcp_ops = net_windows_done_wait_handle }; -void _initialize_ser_windows (); -void -_initialize_ser_windows () +INIT_GDB_FILE (ser_windows) { WSADATA wsa_data; diff --git a/gdb/ser-pipe.c b/gdb/ser-pipe.c index 16f7419..bdf3602 100644 --- a/gdb/ser-pipe.c +++ b/gdb/ser-pipe.c @@ -236,9 +236,7 @@ static const struct serial_ops pipe_ops = ser_unix_write_prim }; -void _initialize_ser_pipe (); -void -_initialize_ser_pipe () +INIT_GDB_FILE (ser_pipe) { serial_add_interface (&pipe_ops); } diff --git a/gdb/ser-tcp.c b/gdb/ser-tcp.c index 122b913..589b23d 100644 --- a/gdb/ser-tcp.c +++ b/gdb/ser-tcp.c @@ -465,9 +465,7 @@ static const struct serial_ops tcp_ops = #endif /* USE_WIN32API */ -void _initialize_ser_tcp (); -void -_initialize_ser_tcp () +INIT_GDB_FILE (ser_tcp) { #ifdef USE_WIN32API /* Do nothing; the TCP serial operations will be initialized in diff --git a/gdb/ser-uds.c b/gdb/ser-uds.c index 64e1599..2a45a90 100644 --- a/gdb/ser-uds.c +++ b/gdb/ser-uds.c @@ -110,9 +110,7 @@ static const struct serial_ops uds_ops = uds_write_prim }; -void _initialize_ser_socket (); -void -_initialize_ser_socket () +INIT_GDB_FILE (ser_socket) { serial_add_interface (&uds_ops); } diff --git a/gdb/ser-unix.c b/gdb/ser-unix.c index cb803a5..553220e 100644 --- a/gdb/ser-unix.c +++ b/gdb/ser-unix.c @@ -30,9 +30,33 @@ #include "gdbsupport/gdb_select.h" #include "cli/cli-cmds.h" #include "gdbsupport/filestuff.h" -#include <termios.h> + +#ifdef HAVE_SYS_IOCTL_H +# include <sys/ioctl.h> +#endif + +#if HAVE_IOKIT_SERIAL_IOSS_H +# include <IOKit/serial/ioss.h> +#endif + +#if HAVE_ASM_TERMIOS_H +/* Workaround to resolve conflicting declarations of termios + in <asm/termbits.h> and <termios.h>. */ +# define termios asmtermios +# include <asm/termbits.h> +# undef termios +#endif + +#ifdef HAVE_TERMIOS_H +# include <termios.h> +#endif + #include "gdbsupport/scoped_ignore_sigttou.h" +#if defined(HAVE_SYS_IOCTL_H) && (defined(BOTHER) || defined(IOSSIOSPEED)) +# define HAVE_CUSTOM_BAUDRATE_SUPPORT 1 +#endif + struct hardwire_ttystate { struct termios termios; @@ -289,14 +313,32 @@ baudtab[] = 4800, B4800 } , +#ifdef B7200 + { + 7200, B7200 + } + , +#endif { 9600, B9600 } , +#ifdef B14400 + { + 14400, B14400 + } + , +#endif { 19200, B19200 } , +#ifdef B28800 + { + 28800, B28800 + } + , +#endif { 38400, B38400 } @@ -307,6 +349,12 @@ baudtab[] = } , #endif +#ifdef B76800 + { + 76800, B76800 + } + , +#endif #ifdef B115200 { 115200, B115200 @@ -412,6 +460,7 @@ rate_to_code (int rate) /* check if it is in between valid values. */ if (rate < baudtab[i].rate) { +#if !HAVE_CUSTOM_BAUDRATE_SUPPORT if (i) { error (_("Invalid baud rate %d. " @@ -423,29 +472,126 @@ rate_to_code (int rate) error (_("Invalid baud rate %d. Minimum value is %d."), rate, baudtab[0].rate); } +#else + return -1; +#endif } } } - + +#if !HAVE_CUSTOM_BAUDRATE_SUPPORT /* The requested speed was too large. */ error (_("Invalid baud rate %d. Maximum value is %d."), rate, baudtab[i - 1].rate); +#else + return -1; +#endif } +/* Set baud rate using B_code from termios.h. */ + static void -hardwire_setbaudrate (struct serial *scb, int rate) +set_baudcode_baudrate (struct serial *scb, int baud_code) { struct hardwire_ttystate state; - int baud_code = rate_to_code (rate); - + if (get_tty_state (scb, &state)) - perror_with_name ("could not get tty state"); + perror_with_name (_("could not get tty state")); cfsetospeed (&state.termios, baud_code); cfsetispeed (&state.termios, baud_code); if (set_tty_state (scb, &state)) - perror_with_name ("could not set tty state"); + perror_with_name (_("could not set tty state")); +} + +#if HAVE_CUSTOM_BAUDRATE_SUPPORT && defined(BOTHER) + +/* Set a custom baud rate using the termios BOTHER. */ + +static void +set_custom_baudrate_linux (int fd, int rate) +{ +#ifdef TCGETS2 + struct termios2 tio; + const unsigned long req_get = TCGETS2; + const unsigned long req_set = TCSETS2; +#else + struct termios tio; + const unsigned long req_get = TCGETS; + const unsigned long req_set = TCSETS; +#endif + + if (ioctl (fd, req_get, &tio) < 0) + perror_with_name (_("Can not get current baud rate")); + + /* Clear the current output baud rate and fill a new value. */ + tio.c_cflag &= ~CBAUD; + tio.c_cflag |= BOTHER; + tio.c_ospeed = rate; + + /* Clear the current input baud rate and fill a new value. */ + tio.c_cflag &= ~(CBAUD << IBSHIFT); + tio.c_cflag |= BOTHER << IBSHIFT; + tio.c_ispeed = rate; + + if (ioctl (fd, req_set, &tio) < 0) + perror_with_name (_("Can not set custom baud rate")); +} + +#elif HAVE_CUSTOM_BAUDRATE_SUPPORT && defined(IOSSIOSPEED) + +/* Set a custom baud rate using the IOSSIOSPEED ioctl call. */ + +static void +set_custom_baudrate_darwin (int fd, int rate) +{ + + if (ioctl (fd, IOSSIOSPEED, &rate) < 0) + perror_with_name (_("Can not set custom baud rate")); +} + +#endif /* HAVE_CUSTOM_BAUDRATE_SUPPORT + && (defined(BOTHER) || defined(IOSSIOSPEED)) */ + +#if HAVE_CUSTOM_BAUDRATE_SUPPORT + +/* Set a baud rate that differs from the OS B_codes. + This is possible if one of the following macros is available: + - BOTHER (Linux). + - IOSSIOSPEED (Darwin). */ + +static void +set_custom_baudrate (int fd, int rate) +{ +#if defined(BOTHER) + set_custom_baudrate_linux (fd, rate); +#elif defined(IOSSIOSPEED) + set_custom_baudrate_darwin (fd, rate); +#endif +} + +#endif /* HAVE_CUSTOM_BAUDRATE_SUPPORT */ + +/* Set the baud rate for the serial communication. */ + +static void +hardwire_setbaudrate (struct serial *scb, int rate) +{ + int baud_code = rate_to_code (rate); + + if (baud_code < 0) + { +#if HAVE_CUSTOM_BAUDRATE_SUPPORT + set_custom_baudrate (scb->fd, rate); +#else + /* An error should already have been thrown by rate_to_code(). + Add an additional error in case execution somehow reaches this line. */ + gdb_assert_not_reached ("Serial baud rate was not found in B_codes"); +#endif + } + else + set_baudcode_baudrate (scb, baud_code); } static int @@ -551,9 +697,7 @@ static const struct serial_ops hardwire_ops = ser_unix_write_prim }; -void _initialize_ser_hardwire (); -void -_initialize_ser_hardwire () +INIT_GDB_FILE (ser_hardwire) { serial_add_interface (&hardwire_ops); diff --git a/gdb/serial.c b/gdb/serial.c index bab8480..d66c637 100644 --- a/gdb/serial.c +++ b/gdb/serial.c @@ -642,9 +642,7 @@ set_parity (const char *ignore_args, int from_tty, struct cmd_list_element *c) serial_parity = GDBPARITY_NONE; } -void _initialize_serial (); -void -_initialize_serial () +INIT_GDB_FILE (serial) { #if 0 add_com ("connect", class_obscure, connect_command, _("\ diff --git a/gdb/sh-linux-tdep.c b/gdb/sh-linux-tdep.c index f0b35d3..2578192 100644 --- a/gdb/sh-linux-tdep.c +++ b/gdb/sh-linux-tdep.c @@ -28,6 +28,7 @@ #include "glibc-tdep.h" #include "sh-tdep.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "gdbarch.h" #define REGSx16(base) \ @@ -187,8 +188,7 @@ sh_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* GNU/Linux uses SVR4-style shared libraries. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); set_gdbarch_fetch_tls_load_module_address (gdbarch, @@ -207,9 +207,7 @@ sh_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tramp_frame_prepend_unwinder (gdbarch, &sh_linux_rt_sigreturn_tramp_frame); } -void _initialize_sh_linux_tdep (); -void -_initialize_sh_linux_tdep () +INIT_GDB_FILE (sh_linux_tdep) { gdbarch_register_osabi (bfd_arch_sh, 0, GDB_OSABI_LINUX, sh_linux_init_abi); } diff --git a/gdb/sh-netbsd-nat.c b/gdb/sh-netbsd-nat.c index 25aafe1..d36dba5 100644 --- a/gdb/sh-netbsd-nat.c +++ b/gdb/sh-netbsd-nat.c @@ -98,9 +98,7 @@ sh_nbsd_nat_target::store_registers (struct regcache *regcache, int regno) } } -void _initialize_shnbsd_nat (); -void -_initialize_shnbsd_nat () +INIT_GDB_FILE (shnbsd_nat) { add_inf_child_target (&the_sh_nbsd_nat_target); } diff --git a/gdb/sh-netbsd-tdep.c b/gdb/sh-netbsd-tdep.c index f99566f..4b0181b 100644 --- a/gdb/sh-netbsd-tdep.c +++ b/gdb/sh-netbsd-tdep.c @@ -68,13 +68,10 @@ shnbsd_init_abi (struct gdbarch_info info, tdep->core_gregmap = (struct sh_corefile_regmap *)regmap; tdep->sizeof_gregset = 84; - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); } -void _initialize_shnbsd_tdep (); -void -_initialize_shnbsd_tdep () +INIT_GDB_FILE (shnbsd_tdep) { gdbarch_register_osabi (bfd_arch_sh, 0, GDB_OSABI_NETBSD, shnbsd_init_abi); diff --git a/gdb/sh-tdep.c b/gdb/sh-tdep.c index 59a67bf..6bd4fd3 100644 --- a/gdb/sh-tdep.c +++ b/gdb/sh-tdep.c @@ -2394,9 +2394,7 @@ sh_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_sh_tdep (); -void -_initialize_sh_tdep () +INIT_GDB_FILE (sh_tdep) { gdbarch_register (bfd_arch_sh, sh_gdbarch_init, NULL); @@ -657,9 +657,7 @@ complete_skip_number (cmd_list_element *cmd, } } -void _initialize_step_skip (); -void -_initialize_step_skip () +INIT_GDB_FILE (step_skip) { static struct cmd_list_element *skiplist = NULL; struct cmd_list_element *c; diff --git a/gdb/sol-thread.c b/gdb/sol-thread.c index ae1e5c0..55e1d3e 100644 --- a/gdb/sol-thread.c +++ b/gdb/sol-thread.c @@ -1111,19 +1111,21 @@ info_solthreads (const char *args, int from_tty) ptid_t sol_thread_target::get_ada_task_ptid (long lwp, ULONGEST thread) { - struct thread_info *thread_info - = iterate_over_threads ([&] (struct thread_info *thread) + auto thread_db_find_thread_from_tid + = [&] (struct thread_info *iter) { - return thread->ptid.tid () == thread; - }); + return iter->ptid.tid () == thread; + }; + + struct thread_info *thread_info + = iterate_over_threads (thread_db_find_thread_from_tid); if (thread_info == NULL) { /* The list of threads is probably not up to date. Find any thread that is missing from the list, and try again. */ update_thread_list (); - thread_info = iterate_over_threads (thread_db_find_thread_from_tid, - &thread); + thread_info = iterate_over_threads (thread_db_find_thread_from_tid); } gdb_assert (thread_info != NULL); @@ -1131,9 +1133,7 @@ sol_thread_target::get_ada_task_ptid (long lwp, ULONGEST thread) return (thread_info->ptid); } -void _initialize_sol_thread (); -void -_initialize_sol_thread () +INIT_GDB_FILE (sol_thread) { void *dlhandle; diff --git a/gdb/solib-aix.c b/gdb/solib-aix.c index 0ad25f1..b246df8 100644 --- a/gdb/solib-aix.c +++ b/gdb/solib-aix.c @@ -17,7 +17,6 @@ #include "solib-aix.h" #include "solib.h" -#include "solist.h" #include "inferior.h" #include "gdb_bfd.h" #include "objfiles.h" @@ -25,6 +24,24 @@ #include "xcoffread.h" #include "observable.h" +/* solib_ops for AIX systems. */ + +struct aix_solib_ops : public solib_ops +{ + void relocate_section_addresses (solib &so, target_section *) const override; + void create_inferior_hook (int from_tty) const override; + owning_intrusive_list<solib> current_sos () const override; + gdb_bfd_ref_ptr bfd_open (const char *pathname) const override; +}; + +/* See solib-aix.h. */ + +solib_ops_up +make_aix_solib_ops () +{ + return std::make_unique<aix_solib_ops> (); +} + /* Our private data in struct solib. */ struct lm_info_aix final : public lm_info @@ -307,10 +324,9 @@ solib_aix_bss_data_overlap (bfd *abfd) return 0; } -/* Implement the "relocate_section_addresses" solib_ops method. */ - -static void -solib_aix_relocate_section_addresses (solib &so, target_section *sec) +void +aix_solib_ops::relocate_section_addresses (solib &so, + target_section *sec) const { struct bfd_section *bfd_sect = sec->the_bfd_section; bfd *abfd = bfd_sect->owner; @@ -411,10 +427,8 @@ solib_aix_get_section_offsets (struct objfile *objfile, return offsets; } -/* Implement the "solib_create_inferior_hook" solib_ops method. */ - -static void -solib_aix_solib_create_inferior_hook (int from_tty) +void +aix_solib_ops::create_inferior_hook (int from_tty) const { const char *warning_msg = "unable to relocate main executable"; @@ -442,10 +456,8 @@ solib_aix_solib_create_inferior_hook (int from_tty) } } -/* Implement the "current_sos" solib_ops method. */ - -static owning_intrusive_list<solib> -solib_aix_current_sos () +owning_intrusive_list<solib> +aix_solib_ops::current_sos () const { std::optional<std::vector<lm_info_aix>> &library_list = solib_aix_get_library_list (current_inferior (), NULL); @@ -481,35 +493,17 @@ solib_aix_current_sos () } /* Add it to the list. */ - auto &new_solib = sos.emplace_back (); - new_solib.so_original_name = so_name; - new_solib.so_name = so_name; + auto &new_solib = sos.emplace_back (*this); + new_solib.original_name = so_name; + new_solib.name = so_name; new_solib.lm_info = std::make_unique<lm_info_aix> (info); } return sos; } -/* Implement the "open_symbol_file_object" solib_ops method. */ - -static int -solib_aix_open_symbol_file_object (int from_tty) -{ - return 0; -} - -/* Implement the "in_dynsym_resolve_code" solib_ops method. */ - -static int -solib_aix_in_dynsym_resolve_code (CORE_ADDR pc) -{ - return 0; -} - -/* Implement the "bfd_open" solib_ops method. */ - -static gdb_bfd_ref_ptr -solib_aix_bfd_open (const char *pathname) +gdb_bfd_ref_ptr +aix_solib_ops::bfd_open (const char *pathname) const { /* The pathname is actually a synthetic filename with the following form: "/path/to/sharedlib(member.o)" (double-quotes excluded). @@ -523,7 +517,7 @@ solib_aix_bfd_open (const char *pathname) int found_file; if (pathname[path_len - 1] != ')') - return solib_bfd_open (pathname); + return solib_ops::bfd_open (pathname); /* Search for the associated parens. */ sep = strrchr (pathname, '('); @@ -533,7 +527,7 @@ solib_aix_bfd_open (const char *pathname) to open pathname without decoding, possibly leading to a failure), rather than triggering an assert failure). */ warning (_("missing '(' in shared object pathname: %s"), pathname); - return solib_bfd_open (pathname); + return solib_ops::bfd_open (pathname); } filename_len = sep - pathname; @@ -676,27 +670,7 @@ solib_aix_normal_stop_observer (struct bpstat *unused_1, int unused_2) data->library_list.reset (); } -/* The solib_ops for AIX targets. */ -const solib_ops solib_aix_so_ops = -{ - solib_aix_relocate_section_addresses, - nullptr, - nullptr, - solib_aix_solib_create_inferior_hook, - solib_aix_current_sos, - solib_aix_open_symbol_file_object, - solib_aix_in_dynsym_resolve_code, - solib_aix_bfd_open, - nullptr, - nullptr, - nullptr, - nullptr, - default_find_solib_addr, -}; - -void _initialize_solib_aix (); -void -_initialize_solib_aix () +INIT_GDB_FILE (solib_aix) { gdb::observers::normal_stop.attach (solib_aix_normal_stop_observer, "solib-aix"); diff --git a/gdb/solib-aix.h b/gdb/solib-aix.h index 7a1bc7b..628b7c8 100644 --- a/gdb/solib-aix.h +++ b/gdb/solib-aix.h @@ -18,9 +18,12 @@ #ifndef GDB_SOLIB_AIX_H #define GDB_SOLIB_AIX_H -struct solib_ops; -extern const solib_ops solib_aix_so_ops; +#include "solib.h" extern CORE_ADDR solib_aix_get_toc_value (CORE_ADDR pc); +/* Return a new solib_ops for AIX systems. */ + +solib_ops_up make_aix_solib_ops (); + #endif /* GDB_SOLIB_AIX_H */ diff --git a/gdb/solib-darwin.c b/gdb/solib-darwin.c index 368f401..aac8ab2 100644 --- a/gdb/solib-darwin.c +++ b/gdb/solib-darwin.c @@ -27,12 +27,31 @@ #include "regcache.h" #include "gdb_bfd.h" -#include "solist.h" +#include "solib.h" #include "solib-darwin.h" #include "mach-o.h" #include "mach-o/external.h" +/* solib_ops for Darwin systems. */ + +struct darwin_solib_ops : public solib_ops +{ + void relocate_section_addresses (solib &so, target_section *) const override; + void clear_solib (program_space *pspace) const override; + void create_inferior_hook (int from_tty) const override; + owning_intrusive_list<solib> current_sos () const override; + gdb_bfd_ref_ptr bfd_open (const char *pathname) const override; +}; + +/* See solib-darwin.h. */ + +solib_ops_up +make_darwin_solib_ops () +{ + return std::make_unique<darwin_solib_ops> (); +} + struct gdb_dyld_image_info { /* Base address (which corresponds to the Mach-O header). */ @@ -133,7 +152,7 @@ darwin_load_image_infos (struct darwin_info *info) (buf + 8 + ptr_type->length (), ptr_type); } -/* Link map info to include in an allocated so_list entry. */ +/* Link map info to include in an allocated solib entry. */ struct lm_info_darwin final : public lm_info { @@ -188,20 +207,8 @@ find_program_interpreter (void) return buf; } -/* Not used. I don't see how the main symbol file can be found: the - interpreter name is needed and it is known from the executable file. - Note that darwin-nat.c implements pid_to_exec_file. */ - -static int -open_symbol_file_object (int from_tty) -{ - return 0; -} - -/* Build a list of currently loaded shared objects. See solib-svr4.c. */ - -static owning_intrusive_list<solib> -darwin_current_sos () +owning_intrusive_list<solib> +darwin_solib_ops::current_sos () const { type *ptr_type = builtin_type (current_inferior ()->arch ())->builtin_data_ptr; @@ -260,12 +267,12 @@ darwin_current_sos () break; /* Create and fill the new struct solib element. */ - auto &newobj = sos.emplace_back (); + auto &newobj = sos.emplace_back (*this); auto li = std::make_unique<lm_info_darwin> (); - newobj.so_name = file_path.get (); - newobj.so_original_name = newobj.so_name; + newobj.name = file_path.get (); + newobj.original_name = newobj.name; li->lm_addr = load_addr; newobj.lm_info = std::move (li); @@ -363,15 +370,6 @@ darwin_read_exec_load_addr_at_init (struct darwin_info *info) return darwin_validate_exec_header (load_addr); } -/* Return 1 if PC lies in the dynamic symbol resolution code of the - run time loader. */ - -static int -darwin_in_dynsym_resolve_code (CORE_ADDR pc) -{ - return 0; -} - /* A wrapper for bfd_mach_o_fat_extract that handles reference counting properly. This will either return NULL, or return a new reference to a BFD. */ @@ -476,10 +474,8 @@ darwin_solib_read_all_image_info_addr (struct darwin_info *info) info->all_image_addr = extract_unsigned_integer (buf, len, BFD_ENDIAN_BIG); } -/* Shared library startup support. See documentation in solib-svr4.c. */ - -static void -darwin_solib_create_inferior_hook (int from_tty) +void +darwin_solib_ops::create_inferior_hook (int from_tty) const { /* Everything below only makes sense if we have a running inferior. */ if (!target_has_execution ()) @@ -579,8 +575,8 @@ darwin_solib_create_inferior_hook (int from_tty) create_solib_event_breakpoint (current_inferior ()->arch (), notifier); } -static void -darwin_clear_solib (program_space *pspace) +void +darwin_solib_ops::clear_solib (program_space *pspace) const { darwin_info *info = get_darwin_info (pspace); @@ -591,8 +587,9 @@ darwin_clear_solib (program_space *pspace) /* The section table is built from bfd sections using bfd VMAs. Relocate these VMAs according to solib info. */ -static void -darwin_relocate_section_addresses (solib &so, target_section *sec) +void +darwin_solib_ops::relocate_section_addresses (solib &so, + target_section *sec) const { auto *li = gdb::checked_static_cast<lm_info_darwin *> (so.lm_info.get ()); @@ -611,9 +608,9 @@ darwin_relocate_section_addresses (solib &so, target_section *sec) if (sec->addr < so.addr_low) so.addr_low = sec->addr; } - -static gdb_bfd_ref_ptr -darwin_bfd_open (const char *pathname) + +gdb_bfd_ref_ptr +darwin_solib_ops::bfd_open (const char *pathname) const { int found_file; @@ -641,20 +638,3 @@ darwin_bfd_open (const char *pathname) return res; } - -const solib_ops darwin_so_ops = -{ - darwin_relocate_section_addresses, - nullptr, - darwin_clear_solib, - darwin_solib_create_inferior_hook, - darwin_current_sos, - open_symbol_file_object, - darwin_in_dynsym_resolve_code, - darwin_bfd_open, - nullptr, - nullptr, - nullptr, - nullptr, - default_find_solib_addr, -}; diff --git a/gdb/solib-darwin.h b/gdb/solib-darwin.h index b96e744..f5bcdd1 100644 --- a/gdb/solib-darwin.h +++ b/gdb/solib-darwin.h @@ -20,8 +20,10 @@ #ifndef GDB_SOLIB_DARWIN_H #define GDB_SOLIB_DARWIN_H -struct solib_ops; +#include "solib.h" -extern const solib_ops darwin_so_ops; +/* Return a new solib_ops for Darwin systems. */ + +extern solib_ops_up make_darwin_solib_ops (); #endif /* GDB_SOLIB_DARWIN_H */ diff --git a/gdb/solib-dsbt.c b/gdb/solib-dsbt.c index 3832a7a..13623fc 100644 --- a/gdb/solib-dsbt.c +++ b/gdb/solib-dsbt.c @@ -19,9 +19,7 @@ #include "extract-store-integer.h" #include "inferior.h" -#include "gdbcore.h" #include "solib.h" -#include "solist.h" #include "objfiles.h" #include "symtab.h" #include "command.h" @@ -121,7 +119,26 @@ struct dbst_ext_link_map ext_ptr l_next, l_prev; /* struct link_map *l_next, *l_prev; */ }; -/* Link map info to include in an allocated so_list entry */ +/* solib_ops for DSBT systems. */ + +struct dsbt_solib_ops : public solib_ops +{ + void relocate_section_addresses (solib &so, target_section *) const override; + void clear_solib (program_space *pspace) const override; + void create_inferior_hook (int from_tty) const override; + owning_intrusive_list<solib> current_sos () const override; + bool in_dynsym_resolve_code (CORE_ADDR pc) const override; +}; + +/* See solib-dsbt.h. */ + +solib_ops_up +make_dsbt_solib_ops () +{ + return std::make_unique<dsbt_solib_ops> (); +} + +/* Link map info to include in an allocated solib entry */ struct lm_info_dsbt final : public lm_info { @@ -393,15 +410,6 @@ fetch_loadmap (CORE_ADDR ldmaddr) static void dsbt_relocate_main_executable (void); static int enable_break (void); -/* See solist.h. */ - -static int -open_symbol_file_object (int from_tty) -{ - /* Unimplemented. */ - return 0; -} - /* Given a loadmap and an address, return the displacement needed to relocate the address. */ @@ -512,8 +520,8 @@ lm_base (void) themselves. The declaration of `struct solib' says which fields we provide values for. */ -static owning_intrusive_list<solib> -dsbt_current_sos (void) +owning_intrusive_list<solib> +dsbt_solib_ops::current_sos () const { bfd_endian byte_order = gdbarch_byte_order (current_inferior ()->arch ()); CORE_ADDR lm_addr; @@ -594,7 +602,7 @@ dsbt_current_sos (void) break; } - auto &sop = sos.emplace_back (); + auto &sop = sos.emplace_back (*this); auto li = std::make_unique<lm_info_dsbt> (); li->map = loadmap; /* Fetch the name. */ @@ -612,8 +620,8 @@ dsbt_current_sos (void) gdb_printf (gdb_stdlog, "current_sos: name = %s\n", name_buf.get ()); - sop.so_name = name_buf.get (); - sop.so_original_name = sop.so_name; + sop.name = name_buf.get (); + sop.original_name = sop.name; } sop.lm_info = std::move (li); @@ -630,11 +638,11 @@ dsbt_current_sos (void) return sos; } -/* Return 1 if PC lies in the dynamic symbol resolution code of the +/* Return true if PC lies in the dynamic symbol resolution code of the run time loader. */ -static int -dsbt_in_dynsym_resolve_code (CORE_ADDR pc) +bool +dsbt_solib_ops::in_dynsym_resolve_code (CORE_ADDR pc) const { dsbt_info *info = get_dsbt_info (current_program_space); @@ -850,8 +858,8 @@ dsbt_relocate_main_executable (void) For the DSBT shared library, the main executable needs to be relocated. The shared library breakpoints also need to be enabled. */ -static void -dsbt_solib_create_inferior_hook (int from_tty) +void +dsbt_solib_ops::create_inferior_hook (int from_tty) const { /* Relocate main executable. */ dsbt_relocate_main_executable (); @@ -864,8 +872,8 @@ dsbt_solib_create_inferior_hook (int from_tty) } } -static void -dsbt_clear_solib (program_space *pspace) +void +dsbt_solib_ops::clear_solib (program_space *pspace) const { dsbt_info *info = get_dsbt_info (pspace); @@ -876,8 +884,9 @@ dsbt_clear_solib (program_space *pspace) info->main_executable_lm_info = NULL; } -static void -dsbt_relocate_section_addresses (solib &so, target_section *sec) +void +dsbt_solib_ops::relocate_section_addresses (solib &so, + target_section *sec) const { int seg; auto *li = gdb::checked_static_cast<lm_info_dsbt *> (so.lm_info.get ()); @@ -903,26 +912,7 @@ show_dsbt_debug (struct ui_file *file, int from_tty, gdb_printf (file, _("solib-dsbt debugging is %s.\n"), value); } -const solib_ops dsbt_so_ops = -{ - dsbt_relocate_section_addresses, - nullptr, - dsbt_clear_solib, - dsbt_solib_create_inferior_hook, - dsbt_current_sos, - open_symbol_file_object, - dsbt_in_dynsym_resolve_code, - solib_bfd_open, - nullptr, - nullptr, - nullptr, - nullptr, - default_find_solib_addr, -}; - -void _initialize_dsbt_solib (); -void -_initialize_dsbt_solib () +INIT_GDB_FILE (dsbt_solib) { /* Debug this file's internals. */ add_setshow_zuinteger_cmd ("solib-dsbt", class_maintenance, diff --git a/gdb/solib-dsbt.h b/gdb/solib-dsbt.h index d5c52c6..d44613c 100644 --- a/gdb/solib-dsbt.h +++ b/gdb/solib-dsbt.h @@ -20,8 +20,10 @@ #ifndef GDB_SOLIB_DSBT_H #define GDB_SOLIB_DSBT_H -struct solib_ops; +#include "solib.h" -extern const solib_ops dsbt_so_ops; +/* Return a new solib_ops for DSBT systems. */ + +solib_ops_up make_dsbt_solib_ops (); #endif /* GDB_SOLIB_DSBT_H */ diff --git a/gdb/solib-frv.c b/gdb/solib-frv.c index bf13d36..b48efe5 100644 --- a/gdb/solib-frv.c +++ b/gdb/solib-frv.c @@ -18,15 +18,33 @@ #include "extract-store-integer.h" -#include "gdbcore.h" #include "solib.h" -#include "solist.h" #include "frv-tdep.h" #include "objfiles.h" #include "symtab.h" #include "elf/frv.h" #include "gdb_bfd.h" #include "inferior.h" +#include "solib-frv.h" + +/* solib_ops for FR-V systems. */ + +struct frv_solib_ops : public solib_ops +{ + void relocate_section_addresses (solib &so, target_section *) const override; + void clear_solib (program_space *pspace) const override; + void create_inferior_hook (int from_tty) const override; + owning_intrusive_list<solib> current_sos () const override; + bool in_dynsym_resolve_code (CORE_ADDR pc) const override; +}; + +/* See solib-frv.h. */ + +solib_ops_up +make_frv_solib_ops () +{ + return std::make_unique<frv_solib_ops> (); +} /* FR-V pointers are four bytes wide. */ enum { FRV_PTR_SIZE = 4 }; @@ -194,7 +212,7 @@ struct ext_link_map ext_ptr l_next, l_prev; /* struct link_map *l_next, *l_prev; */ }; -/* Link map info to include in an allocated so_list entry. */ +/* Link map info to include in an allocated solib entry. */ struct lm_info_frv final : public lm_info { @@ -237,15 +255,6 @@ static void frv_relocate_main_executable (void); static CORE_ADDR main_got (void); static int enable_break2 (void); -/* Implement the "open_symbol_file_object" solib_ops method. */ - -static int -open_symbol_file_object (int from_tty) -{ - /* Unimplemented. */ - return 0; -} - /* Cached value for lm_base(), below. */ static CORE_ADDR lm_base_cache = 0; @@ -303,11 +312,8 @@ lm_base (void) return lm_base_cache; } - -/* Implement the "current_sos" solib_ops method. */ - -static owning_intrusive_list<solib> -frv_current_sos () +owning_intrusive_list<solib> +frv_solib_ops::current_sos () const { bfd_endian byte_order = gdbarch_byte_order (current_inferior ()->arch ()); CORE_ADDR lm_addr, mgot; @@ -377,7 +383,7 @@ frv_current_sos () break; } - auto &sop = sos.emplace_back (); + auto &sop = sos.emplace_back (*this); auto li = std::make_unique<lm_info_frv> (); li->map = loadmap; li->got_value = got_addr; @@ -397,8 +403,8 @@ frv_current_sos () warning (_("Can't read pathname for link map entry.")); else { - sop.so_name = name_buf.get (); - sop.so_original_name = sop.so_name; + sop.name = name_buf.get (); + sop.original_name = sop.name; } } else @@ -424,8 +430,8 @@ static CORE_ADDR interp_text_sect_high; static CORE_ADDR interp_plt_sect_low; static CORE_ADDR interp_plt_sect_high; -static int -frv_in_dynsym_resolve_code (CORE_ADDR pc) +bool +frv_solib_ops::in_dynsym_resolve_code (CORE_ADDR pc) const { return ((pc >= interp_text_sect_low && pc < interp_text_sect_high) || (pc >= interp_plt_sect_low && pc < interp_plt_sect_high) @@ -786,8 +792,8 @@ frv_relocate_main_executable (void) to be relocated. The shared library breakpoints also need to be enabled. */ -static void -frv_solib_create_inferior_hook (int from_tty) +void +frv_solib_ops::create_inferior_hook (int from_tty) const { /* Relocate main executable. */ frv_relocate_main_executable (); @@ -800,8 +806,8 @@ frv_solib_create_inferior_hook (int from_tty) } } -static void -frv_clear_solib (program_space *pspace) +void +frv_solib_ops::clear_solib (program_space *pspace) const { lm_base_cache = 0; enable_break2_done = 0; @@ -811,8 +817,9 @@ frv_clear_solib (program_space *pspace) main_executable_lm_info = NULL; } -static void -frv_relocate_section_addresses (solib &so, target_section *sec) +void +frv_solib_ops::relocate_section_addresses (solib &so, + target_section *sec) const { int seg; auto *li = gdb::checked_static_cast<lm_info_frv *> (so.lm_info.get ()); @@ -1073,20 +1080,3 @@ frv_fetch_objfile_link_map (struct objfile *objfile) /* Not found! */ return 0; } - -const solib_ops frv_so_ops = -{ - frv_relocate_section_addresses, - nullptr, - frv_clear_solib, - frv_solib_create_inferior_hook, - frv_current_sos, - open_symbol_file_object, - frv_in_dynsym_resolve_code, - solib_bfd_open, - nullptr, - nullptr, - nullptr, - nullptr, - default_find_solib_addr, -}; diff --git a/gdb/solib-frv.h b/gdb/solib-frv.h new file mode 100644 index 0000000..a2f3558 --- /dev/null +++ b/gdb/solib-frv.h @@ -0,0 +1,28 @@ +/* Handle FR-V (FDPIC) shared libraries for GDB, the GNU Debugger. + Copyright (C) 2025 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#ifndef GDB_SOLIB_FRV_H +#define GDB_SOLIB_FRV_H + +#include "solib.h" + +/* Return a new solib_ops for FR-V systems. */ + +solib_ops_up make_frv_solib_ops (); + +#endif /* GDB_SOLIB_FRV_H */ diff --git a/gdb/solib-rocm.c b/gdb/solib-rocm.c index 27b404c..2d26c3c 100644 --- a/gdb/solib-rocm.c +++ b/gdb/solib-rocm.c @@ -26,10 +26,10 @@ #include "event-top.h" #include "gdbsupport/fileio.h" #include "inferior.h" +#include "linux-tdep.h" #include "observable.h" #include "solib.h" #include "solib-svr4.h" -#include "solist.h" #include "symfile.h" #include <unordered_map> @@ -154,7 +154,69 @@ struct solib_info /* Per-inferior data key. */ static const registry<inferior>::key<solib_info> rocm_solib_data; -static solib_ops rocm_solib_ops; +/* solib_ops for ROCm systems. */ + +struct rocm_solib_ops : public solib_ops +{ + /* HOST_OPS is the host solib_ops that rocm_solib_ops hijacks / wraps, + in order to provide support for ROCm code objects. */ + explicit rocm_solib_ops (solib_ops_up host_ops) + : m_host_ops (std::move (host_ops)) + { + } + + /* The methods implemented by rocm_solib_ops. */ + owning_intrusive_list<solib> current_sos () const override; + void create_inferior_hook (int from_tty) const override; + gdb_bfd_ref_ptr bfd_open (const char *pathname) const override; + void relocate_section_addresses (solib &so, target_section *) const override; + void handle_event () const override; + + /* Implement the following methods just to forward the calls to the host + solib_ops. We currently need to implement all the methods that + svr4_solib_ops implements. */ + void clear_so (const solib &so) const override + { return m_host_ops->clear_so (so); } + + void clear_solib (program_space *pspace) const override + { return m_host_ops->clear_solib (pspace); } + + bool open_symbol_file_object (int from_tty) const override + { return m_host_ops->open_symbol_file_object (from_tty); } + + bool in_dynsym_resolve_code (CORE_ADDR pc) const override + { return m_host_ops->in_dynsym_resolve_code (pc); } + + bool same (const solib &gdb, const solib &inferior) const override + { return m_host_ops->same (gdb, inferior); } + + bool keep_data_in_core (CORE_ADDR vaddr, unsigned long size) const override + { return m_host_ops->keep_data_in_core (vaddr, size); } + + void update_breakpoints () const override + { return m_host_ops->update_breakpoints (); } + + std::optional<CORE_ADDR> find_solib_addr (solib &so) const override + { return m_host_ops->find_solib_addr (so); } + + bool supports_namespaces () const override + { return true; } + + int find_solib_ns (const solib &so) const override + { return m_host_ops->find_solib_ns (so); } + + int num_active_namespaces () const override + { return m_host_ops->num_active_namespaces (); } + + std::vector<const solib *> get_solibs_in_ns (int nsid) const override + { return m_host_ops->get_solibs_in_ns (nsid); } + +private: + owning_intrusive_list<solib> + solibs_from_rocm_sos (const std::vector<rocm_so> &sos) const; + + solib_ops_up m_host_ops; +}; /* Fetch the solib_info data for INF. */ @@ -171,13 +233,13 @@ get_solib_info (inferior *inf) /* Relocate section addresses. */ -static void -rocm_solib_relocate_section_addresses (solib &so, - struct target_section *sec) +void +rocm_solib_ops::relocate_section_addresses (solib &so, + struct target_section *sec) const { if (!is_amdgpu_arch (gdbarch_from_bfd (so.abfd.get ()))) { - svr4_so_ops.relocate_section_addresses (so, sec); + m_host_ops->relocate_section_addresses (so, sec); return; } @@ -188,34 +250,34 @@ rocm_solib_relocate_section_addresses (solib &so, static void rocm_update_solib_list (); -static void -rocm_solib_handle_event () +void +rocm_solib_ops::handle_event () const { - /* Since we sit on top of svr4_so_ops, we might get called following an event - concerning host libraries. We must therefore forward the call. If the - event was for a ROCm code object, it will be a no-op. On the other hand, + /* Since we sit on top of a host solib_ops, we might get called following an + event concerning host libraries. We must therefore forward the call. If + the event was for a ROCm code object, it will be a no-op. On the other hand if the event was for host libraries, rocm_update_solib_list will be essentially be a no-op (it will reload the same code object list as was previously loaded). */ - svr4_so_ops.handle_event (); + m_host_ops->handle_event (); rocm_update_solib_list (); } -/* Create so_list objects from rocm_so objects in SOS. */ +/* Create solib objects from rocm_so objects in SOS. */ -static owning_intrusive_list<solib> -so_list_from_rocm_sos (const std::vector<rocm_so> &sos) +owning_intrusive_list<solib> +rocm_solib_ops::solibs_from_rocm_sos (const std::vector<rocm_so> &sos) const { owning_intrusive_list<solib> dst; for (const rocm_so &so : sos) { - auto &newobj = dst.emplace_back (); + auto &newobj = dst.emplace_back (*this); newobj.lm_info = std::make_unique<lm_info_svr4> (*so.lm_info); - newobj.so_name = so.name; - newobj.so_original_name = so.unique_name; + newobj.name = so.name; + newobj.original_name = so.unique_name; } return dst; @@ -224,11 +286,11 @@ so_list_from_rocm_sos (const std::vector<rocm_so> &sos) /* Build a list of `struct solib' objects describing the shared objects currently loaded in the inferior. */ -static owning_intrusive_list<solib> -rocm_solib_current_sos () +owning_intrusive_list<solib> +rocm_solib_ops::current_sos () const { /* First, retrieve the host-side shared library list. */ - owning_intrusive_list<solib> sos = svr4_so_ops.current_sos (); + owning_intrusive_list<solib> sos = m_host_ops->current_sos (); /* Then, the device-side shared library list. */ std::vector<rocm_so> &dev_sos = get_solib_info (current_inferior ())->solib_list; @@ -236,13 +298,13 @@ rocm_solib_current_sos () if (dev_sos.empty ()) return sos; - owning_intrusive_list<solib> dev_so_list = so_list_from_rocm_sos (dev_sos); + owning_intrusive_list<solib> dev_solibs = solibs_from_rocm_sos (dev_sos); if (sos.empty ()) - return dev_so_list; + return dev_solibs; /* Append our libraries to the end of the list. */ - sos.splice (std::move (dev_so_list)); + sos.splice (std::move (dev_solibs)); return sos; } @@ -580,12 +642,12 @@ rocm_bfd_iovec_open (bfd *abfd, inferior *inferior) } } -static gdb_bfd_ref_ptr -rocm_solib_bfd_open (const char *pathname) +gdb_bfd_ref_ptr +rocm_solib_ops::bfd_open (const char *pathname) const { /* Handle regular files with SVR4 open. */ if (strstr (pathname, "://") == nullptr) - return svr4_so_ops.bfd_open (pathname); + return m_host_ops->bfd_open (pathname); auto open = [] (bfd *nbfd) -> gdb_bfd_iovec_base * { @@ -669,12 +731,12 @@ rocm_solib_bfd_open (const char *pathname) return abfd; } -static void -rocm_solib_create_inferior_hook (int from_tty) +void +rocm_solib_ops::create_inferior_hook (int from_tty) const { get_solib_info (current_inferior ())->solib_list.clear (); - svr4_so_ops.solib_create_inferior_hook (from_tty); + m_host_ops->create_inferior_hook (from_tty); } static void @@ -704,6 +766,9 @@ rocm_update_solib_list () return; } + gdb::unique_xmalloc_ptr<amd_dbgapi_code_object_id_t> code_object_list_holder + (code_object_list); + for (size_t i = 0; i < count; ++i) { CORE_ADDR l_addr; @@ -734,24 +799,6 @@ rocm_update_solib_list () sos.emplace_back (uri_bytes, std::move (unique_name), std::move (li)); } - - xfree (code_object_list); - - if (rocm_solib_ops.current_sos == NULL) - { - /* Override what we need to. */ - rocm_solib_ops = svr4_so_ops; - rocm_solib_ops.current_sos = rocm_solib_current_sos; - rocm_solib_ops.solib_create_inferior_hook - = rocm_solib_create_inferior_hook; - rocm_solib_ops.bfd_open = rocm_solib_bfd_open; - rocm_solib_ops.relocate_section_addresses - = rocm_solib_relocate_section_addresses; - rocm_solib_ops.handle_event = rocm_solib_handle_event; - - /* Engage the ROCm so_ops. */ - set_gdbarch_so_ops (current_inferior ()->arch (), &rocm_solib_ops); - } } static void @@ -759,6 +806,10 @@ rocm_solib_target_inferior_created (inferior *inf) { get_solib_info (inf)->solib_list.clear (); + auto prev_ops = inf->pspace->release_solib_ops (); + auto rocm_ops = std::make_unique<rocm_solib_ops> (std::move (prev_ops)); + inf->pspace->set_solib_ops (std::move (rocm_ops)); + rocm_update_solib_list (); /* Force GDB to reload the solibs. */ @@ -766,11 +817,22 @@ rocm_solib_target_inferior_created (inferior *inf) solib_add (nullptr, 0, auto_solib_add); } -/* -Wmissing-prototypes */ -extern initialize_file_ftype _initialize_rocm_solib; +static void +rocm_solib_target_inferior_execd (inferior *exec_inf, inferior *follow_inf) +{ + /* Engage the ROCm so_ops, but only if dbgapi is attached to the inferior + (avoiding remote inferiors and core file debugging). */ + if (get_amd_dbgapi_process_id (follow_inf) == AMD_DBGAPI_PROCESS_NONE) + return; + + auto prev_ops = follow_inf->pspace->release_solib_ops (); + auto rocm_ops = std::make_unique<rocm_solib_ops> (std::move (prev_ops)); + follow_inf->pspace->set_solib_ops (std::move (rocm_ops)); -void -_initialize_rocm_solib () + get_solib_info (exec_inf)->solib_list.clear (); +} + +INIT_GDB_FILE (rocm_solib) { /* The dependency on the amd-dbgapi exists because solib-rocm's inferior_created observer needs amd-dbgapi to have attached the process, @@ -779,4 +841,8 @@ _initialize_rocm_solib () (rocm_solib_target_inferior_created, "solib-rocm", { &get_amd_dbgapi_target_inferior_created_observer_token () }); + + gdb::observers::inferior_execd.attach + (rocm_solib_target_inferior_execd, "solib-rocm", + { &get_amd_dbgapi_target_inferior_execd_observer_token () }); } diff --git a/gdb/solib-svr4-linux.c b/gdb/solib-svr4-linux.c new file mode 100644 index 0000000..fd86cf0 --- /dev/null +++ b/gdb/solib-svr4-linux.c @@ -0,0 +1,98 @@ +/* Target-dependent code for GNU/Linux using SVR4-style libraries. + + Copyright (C) 2025 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include "solib-svr4-linux.h" + +/* See solib-svr4-linux.h. */ + +solib_ops_up +make_linux_ilp32_svr4_solib_ops () +{ + return std::make_unique<linux_ilp32_svr4_solib_ops> (); +} + +/* See solib-svr4-linux.h. */ + +link_map_offsets * +linux_ilp32_svr4_solib_ops::fetch_link_map_offsets () const +{ + static link_map_offsets lmo; + static link_map_offsets *lmp = nullptr; + + if (lmp == nullptr) + { + lmp = &lmo; + + lmo.r_version_offset = 0; + lmo.r_version_size = 4; + lmo.r_map_offset = 4; + lmo.r_brk_offset = 8; + lmo.r_ldsomap_offset = -1; + lmo.r_next_offset = 20; + + /* Everything we need is in the first 20 bytes. */ + lmo.link_map_size = 20; + lmo.l_addr_offset = 0; + lmo.l_name_offset = 4; + lmo.l_ld_offset = 8; + lmo.l_next_offset = 12; + lmo.l_prev_offset = 16; + } + + return lmp; +} + +/* See solib-svr4-linux.h. */ + +solib_ops_up +make_linux_lp64_svr4_solib_ops () +{ + return std::make_unique<linux_lp64_svr4_solib_ops> (); +} + +/* See linux-tdep.h. */ + +link_map_offsets * +linux_lp64_svr4_solib_ops::fetch_link_map_offsets () const +{ + static link_map_offsets lmo; + static link_map_offsets *lmp = nullptr; + + if (lmp == nullptr) + { + lmp = &lmo; + + lmo.r_version_offset = 0; + lmo.r_version_size = 4; + lmo.r_map_offset = 8; + lmo.r_brk_offset = 16; + lmo.r_ldsomap_offset = -1; + lmo.r_next_offset = 40; + + /* Everything we need is in the first 40 bytes. */ + lmo.link_map_size = 40; + lmo.l_addr_offset = 0; + lmo.l_name_offset = 8; + lmo.l_ld_offset = 16; + lmo.l_next_offset = 24; + lmo.l_prev_offset = 32; + } + + return lmp; +} diff --git a/gdb/solib-svr4-linux.h b/gdb/solib-svr4-linux.h new file mode 100644 index 0000000..623013c --- /dev/null +++ b/gdb/solib-svr4-linux.h @@ -0,0 +1,47 @@ +/* Target-dependent code for GNU/Linux using SVR4-style libraries. + + Copyright (C) 2025 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#ifndef GDB_SOLIB_SVR4_LINUX_H +#define GDB_SOLIB_SVR4_LINUX_H + +#include "solib-svr4.h" + +/* solib_ops for ILP32 Linux systems. */ + +struct linux_ilp32_svr4_solib_ops : public svr4_solib_ops +{ + link_map_offsets *fetch_link_map_offsets () const override; +}; + +/* solib_ops for LP64 Linux systems. */ + +struct linux_lp64_svr4_solib_ops : public svr4_solib_ops +{ + link_map_offsets *fetch_link_map_offsets () const override; +}; + +/* Return a new solib_ops for ILP32 Linux systems. */ + +extern solib_ops_up make_linux_ilp32_svr4_solib_ops (); + +/* Return a new solib_ops for LP64 Linux systems. */ + +extern solib_ops_up make_linux_lp64_svr4_solib_ops (); + +#endif /* GDB_SOLIB_SVR4_LINUX_H */ diff --git a/gdb/solib-svr4.c b/gdb/solib-svr4.c index 9f56d86..af08b75 100644 --- a/gdb/solib-svr4.c +++ b/gdb/solib-svr4.c @@ -35,7 +35,6 @@ #include "regcache.h" #include "observable.h" -#include "solist.h" #include "solib.h" #include "solib-svr4.h" @@ -48,8 +47,6 @@ #include <map> -static struct link_map_offsets *svr4_fetch_link_map_offsets (void); -static int svr4_have_link_map_offsets (void); static void svr4_relocate_main_executable (void); static void probes_table_remove_objfile_probes (struct objfile *objfile); static void svr4_iterate_over_objfiles_in_search_order @@ -91,27 +88,6 @@ static const char * const main_name_list[] = NULL }; -/* What to do when a probe stop occurs. */ - -enum probe_action -{ - /* Something went seriously wrong. Stop using probes and - revert to using the older interface. */ - PROBES_INTERFACE_FAILED, - - /* No action is required. The shared object list is still - valid. */ - DO_NOTHING, - - /* The shared object list should be reloaded entirely. */ - FULL_RELOAD, - - /* Attempt to incrementally update the shared object list. If - the update fails or is not possible, fall back to reloading - the list in full. */ - UPDATE_OR_RELOAD, -}; - /* A probe's name and its associated action. */ struct probe_info @@ -186,22 +162,22 @@ svr4_same (const char *gdb_name, const char *inferior_name, return gdb_lm_info.l_addr_inferior == inferior_lm_info.l_addr_inferior; } -static int -svr4_same (const solib &gdb, const solib &inferior) +bool +svr4_solib_ops::same (const solib &gdb, const solib &inferior) const { auto *lmg = gdb::checked_static_cast<const lm_info_svr4 *> (gdb.lm_info.get ()); auto *lmi = gdb::checked_static_cast<const lm_info_svr4 *> (inferior.lm_info.get ()); - return svr4_same (gdb.so_original_name.c_str (), - inferior.so_original_name.c_str (), *lmg, *lmi); + return svr4_same (gdb.original_name.c_str (), + inferior.original_name.c_str (), *lmg, *lmi); } -static lm_info_svr4_up -lm_info_read (CORE_ADDR lm_addr) +lm_info_svr4_up +svr4_solib_ops::read_lm_info (CORE_ADDR lm_addr) const { - struct link_map_offsets *lmo = svr4_fetch_link_map_offsets (); + link_map_offsets *lmo = this->fetch_link_map_offsets (); lm_info_svr4_up lm_info; gdb::byte_vector lm (lmo->link_map_size); @@ -231,16 +207,16 @@ lm_info_read (CORE_ADDR lm_addr) return lm_info; } -static int -has_lm_dynamic_from_link_map (void) +int +svr4_solib_ops::has_lm_dynamic_from_link_map () const { - struct link_map_offsets *lmo = svr4_fetch_link_map_offsets (); + link_map_offsets *lmo = this->fetch_link_map_offsets (); return lmo->l_ld_offset >= 0; } -static CORE_ADDR -lm_addr_check (const solib &so, bfd *abfd) +CORE_ADDR +svr4_solib_ops::lm_addr_check (const solib &so, bfd *abfd) const { auto *li = gdb::checked_static_cast<lm_info_svr4 *> (so.lm_info.get ()); @@ -251,7 +227,7 @@ lm_addr_check (const solib &so, bfd *abfd) l_addr = li->l_addr_inferior; - if (! abfd || ! has_lm_dynamic_from_link_map ()) + if (!abfd || !this->has_lm_dynamic_from_link_map ()) goto set_addr; l_dynaddr = li->l_ld; @@ -317,7 +293,7 @@ lm_addr_check (const solib &so, bfd *abfd) gdb_printf (_("Using PIC (Position Independent Code) " "prelink displacement %s for \"%s\".\n"), paddress (current_inferior ()->arch (), l_addr), - so.so_name.c_str ()); + so.name.c_str ()); } else { @@ -333,7 +309,7 @@ lm_addr_check (const solib &so, bfd *abfd) warning (_(".dynamic section for \"%s\" " "is not at the expected address " "(wrong library or version mismatch?)"), - so.so_name.c_str ()); + so.name.c_str ()); } } @@ -369,7 +345,7 @@ struct svr4_info CORE_ADDR debug_loader_offset = 0; /* Name of the dynamic linker, valid if debug_loader_offset_p. */ - char *debug_loader_name = nullptr; + std::string debug_loader_name; /* Load map address for the main executable in default namespace. */ CORE_ADDR main_lm_addr = 0; @@ -477,8 +453,8 @@ svr4_is_default_namespace (const svr4_info *info, CORE_ADDR debug_base) /* Free the probes table. */ -static void -free_probes_table (struct svr4_info *info) +void +svr4_solib_ops::free_probes_table (svr4_info *info) const { info->probes_table.reset (nullptr); } @@ -754,9 +730,6 @@ elf_locate_base (void) { CORE_ADDR dyn_ptr, dyn_ptr_addr; - if (!svr4_have_link_map_offsets ()) - return 0; - /* Look for DT_MIPS_RLD_MAP first. MIPS executables use this instead of DT_DEBUG, although they sometimes contain an unused DT_DEBUG. */ @@ -825,10 +798,10 @@ elf_locate_base (void) checking r_version for a known version number, or r_state for RT_CONSISTENT. */ -static CORE_ADDR -solib_svr4_r_map (CORE_ADDR debug_base) +CORE_ADDR +svr4_solib_ops::read_r_map (CORE_ADDR debug_base) const { - struct link_map_offsets *lmo = svr4_fetch_link_map_offsets (); + link_map_offsets *lmo = this->fetch_link_map_offsets (); type *ptr_type = builtin_type (current_inferior ()->arch ())->builtin_data_ptr; CORE_ADDR addr = 0; @@ -848,10 +821,10 @@ solib_svr4_r_map (CORE_ADDR debug_base) /* Find r_brk from the inferior's debug base. */ -static CORE_ADDR -solib_svr4_r_brk (struct svr4_info *info) +CORE_ADDR +svr4_solib_ops::find_r_brk (svr4_info *info) const { - struct link_map_offsets *lmo = svr4_fetch_link_map_offsets (); + link_map_offsets *lmo = this->fetch_link_map_offsets (); type *ptr_type = builtin_type (current_inferior ()->arch ())->builtin_data_ptr; @@ -862,10 +835,10 @@ solib_svr4_r_brk (struct svr4_info *info) /* Find the link map for the dynamic linker (if it is not in the normal list of loaded shared objects). */ -static CORE_ADDR -solib_svr4_r_ldsomap (struct svr4_info *info) +CORE_ADDR +svr4_solib_ops::find_r_ldsomap (svr4_info *info) const { - struct link_map_offsets *lmo = svr4_fetch_link_map_offsets (); + link_map_offsets *lmo = this->fetch_link_map_offsets (); type *ptr_type = builtin_type (current_inferior ()->arch ())->builtin_data_ptr; enum bfd_endian byte_order = type_byte_order (ptr_type); @@ -893,10 +866,10 @@ solib_svr4_r_ldsomap (struct svr4_info *info) /* Find the next namespace from the r_next field. */ -static CORE_ADDR -solib_svr4_r_next (CORE_ADDR debug_base) +CORE_ADDR +svr4_solib_ops::read_r_next (CORE_ADDR debug_base) const { - link_map_offsets *lmo = svr4_fetch_link_map_offsets (); + link_map_offsets *lmo = this->fetch_link_map_offsets (); type *ptr_type = builtin_type (current_inferior ()->arch ())->builtin_data_ptr; bfd_endian byte_order = type_byte_order (ptr_type); @@ -928,8 +901,8 @@ solib_svr4_r_next (CORE_ADDR debug_base) memory areas containing the l_name string are saved in the core file. */ -static int -svr4_keep_data_in_core (CORE_ADDR vaddr, unsigned long size) +bool +svr4_solib_ops::keep_data_in_core (CORE_ADDR vaddr, unsigned long size) const { struct svr4_info *info; CORE_ADDR ldsomap; @@ -939,25 +912,25 @@ svr4_keep_data_in_core (CORE_ADDR vaddr, unsigned long size) info->debug_base = elf_locate_base (); if (info->debug_base == 0) - return 0; + return false; - ldsomap = solib_svr4_r_ldsomap (info); + ldsomap = this->find_r_ldsomap (info); if (!ldsomap) - return 0; + return false; - std::unique_ptr<lm_info_svr4> li = lm_info_read (ldsomap); + std::unique_ptr<lm_info_svr4> li = this->read_lm_info (ldsomap); name_lm = li != NULL ? li->l_name : 0; return (name_lm >= vaddr && name_lm < vaddr + size); } -/* See solist.h. */ +/* See solib.h. */ -static int -open_symbol_file_object (int from_tty) +bool +svr4_solib_ops::open_symbol_file_object (int from_tty) const { CORE_ADDR lm, l_name; - struct link_map_offsets *lmo = svr4_fetch_link_map_offsets (); + link_map_offsets *lmo = this->fetch_link_map_offsets (); type *ptr_type = builtin_type (current_inferior ()->arch ())->builtin_data_ptr; int l_name_size = ptr_type->length (); @@ -970,17 +943,17 @@ open_symbol_file_object (int from_tty) if (current_program_space->symfile_object_file) if (!query (_("Attempt to reload symbols from process? "))) - return 0; + return false; /* Always locate the debug struct, in case it has moved. */ info->debug_base = elf_locate_base (); if (info->debug_base == 0) - return 0; /* failed somehow... */ + return false; /* failed somehow... */ /* First link map member should be the executable. */ - lm = solib_svr4_r_map (info->debug_base); + lm = this->read_r_map (info->debug_base); if (lm == 0) - return 0; /* failed somehow... */ + return false; /* failed somehow... */ /* Read address of name from target memory to GDB. */ read_memory (lm + lmo->l_name_offset, l_name_buf.data (), l_name_size); @@ -989,7 +962,7 @@ open_symbol_file_object (int from_tty) l_name = extract_typed_address (l_name_buf.data (), ptr_type); if (l_name == 0) - return 0; /* No filename. */ + return false; /* No filename. */ /* Now fetch the filename from target memory. */ gdb::unique_xmalloc_ptr<char> filename @@ -998,13 +971,13 @@ open_symbol_file_object (int from_tty) if (filename == nullptr) { warning (_("failed to read exec filename from attached file")); - return 0; + return false; } /* Have a pathname: read the symbol file. */ symbol_file_add_main (filename.get (), add_flags); - return 1; + return true; } /* Data exchange structure for the XML parser as returned by @@ -1037,8 +1010,8 @@ svr4_free_objfile_observer (struct objfile *objfile) /* Implement solib_ops.clear_so. */ -static void -svr4_clear_so (const solib &so) +void +svr4_solib_ops::clear_so (const solib &so) const { auto *li = gdb::checked_static_cast<lm_info_svr4 *> (so.lm_info.get ()); @@ -1046,19 +1019,19 @@ svr4_clear_so (const solib &so) li->l_addr_p = 0; } -/* Create the so_list objects equivalent to the svr4_sos in SOS. */ +/* Create the solib objects equivalent to the svr4_sos in SOS. */ -static owning_intrusive_list<solib> -so_list_from_svr4_sos (const std::vector<svr4_so> &sos) +owning_intrusive_list<solib> +svr4_solib_ops::solibs_from_svr4_sos (const std::vector<svr4_so> &sos) const { owning_intrusive_list<solib> dst; for (const svr4_so &so : sos) { - auto &newobj = dst.emplace_back (); + auto &newobj = dst.emplace_back (*this); - newobj.so_name = so.name; - newobj.so_original_name = so.name; + newobj.name = so.name; + newobj.original_name = so.name; newobj.lm_info = std::make_unique<lm_info_svr4> (*so.lm_info); } @@ -1176,11 +1149,10 @@ static const struct gdb_xml_element svr4_library_list_elements[] = { NULL, NULL, NULL, GDB_XML_EF_NONE, NULL, NULL } }; -/* Parse qXfer:libraries:read packet into *SO_LIST_RETURN. Return 1 if +/* Parse qXfer:libraries:read packet into *LIST. - Return 0 if packet not supported, *SO_LIST_RETURN is not modified in such - case. Return 1 if *SO_LIST_RETURN contains the library list, it may be - empty, caller is responsible for freeing all its entries. */ + Return 0 if packet not supported, *LIST is not modified in such case. + Return 1 if *LIST contains the library list. */ static int svr4_parse_libraries (const char *document, struct svr4_library_list *list) @@ -1202,11 +1174,11 @@ svr4_parse_libraries (const char *document, struct svr4_library_list *list) return 0; } -/* Attempt to get so_list from target via qXfer:libraries-svr4:read packet. +/* Attempt to get the shared object list from target via + qXfer:libraries-svr4:read packet. - Return 0 if packet not supported, *SO_LIST_RETURN is not modified in such - case. Return 1 if *SO_LIST_RETURN contains the library list, it may be - empty, caller is responsible for freeing all its entries. + Return 0 if packet not supported, *LIST is not modified in such case. + Return 1 if *LIST contains the library list. Note that ANNEX must be NULL if the remote does not explicitly allow qXfer:libraries-svr4:read packets with non-empty annexes. Support for @@ -1243,8 +1215,8 @@ svr4_current_sos_via_xfer_libraries (struct svr4_library_list *list, /* If no shared library information is available from the dynamic linker, build a fallback list from other sources. */ -static owning_intrusive_list<solib> -svr4_default_sos (svr4_info *info) +owning_intrusive_list<solib> +svr4_solib_ops::default_sos (svr4_info *info) const { if (!info->debug_loader_offset_p) return {}; @@ -1256,11 +1228,11 @@ svr4_default_sos (svr4_info *info) li->l_addr_p = 1; owning_intrusive_list<solib> sos; - auto &newobj = sos.emplace_back (); + auto &newobj = sos.emplace_back (*this); newobj.lm_info = std::move (li); - newobj.so_name = info->debug_loader_name; - newobj.so_original_name = newobj.so_name; + newobj.name = info->debug_loader_name; + newobj.original_name = newobj.name; return sos; } @@ -1272,16 +1244,16 @@ svr4_default_sos (svr4_info *info) is returned the entries stored to LINK_PTR_PTR are still valid although they may represent only part of the inferior library list. */ -static int -svr4_read_so_list (svr4_info *info, CORE_ADDR lm, CORE_ADDR prev_lm, - std::vector<svr4_so> &sos, int ignore_first) +int +svr4_solib_ops::read_so_list (svr4_info *info, CORE_ADDR lm, CORE_ADDR prev_lm, + std::vector<svr4_so> &sos, int ignore_first) const { CORE_ADDR first_l_name = 0; CORE_ADDR next_lm; for (; lm != 0; prev_lm = lm, lm = next_lm) { - lm_info_svr4_up li = lm_info_read (lm); + lm_info_svr4_up li = this->read_lm_info (lm); if (li == NULL) return 0; @@ -1337,8 +1309,8 @@ svr4_read_so_list (svr4_info *info, CORE_ADDR lm, CORE_ADDR prev_lm, stored by the probes interface. Handle special cases relating to the first elements of the list in default namespace. */ -static void -svr4_current_sos_direct (struct svr4_info *info) +void +svr4_solib_ops::current_sos_direct (svr4_info *info) const { CORE_ADDR lm; bool ignore_first; @@ -1404,15 +1376,15 @@ svr4_current_sos_direct (struct svr4_info *info) /* Collect the sos in each namespace. */ CORE_ADDR debug_base = info->debug_base; for (; debug_base != 0; - ignore_first = false, debug_base = solib_svr4_r_next (debug_base)) + ignore_first = false, debug_base = this->read_r_next (debug_base)) { /* Walk the inferior's link map list, and build our so_list list. */ - lm = solib_svr4_r_map (debug_base); + lm = this->read_r_map (debug_base); if (lm != 0) { svr4_maybe_add_namespace (info, debug_base); - svr4_read_so_list (info, lm, 0, info->solib_lists[debug_base], - ignore_first); + this->read_so_list (info, lm, 0, info->solib_lists[debug_base], + ignore_first); } } @@ -1425,15 +1397,15 @@ svr4_current_sos_direct (struct svr4_info *info) r_debug object. If we added it to the default namespace (as it was), we would probably run into inconsistencies with the load map's prev/next links (I wonder if we did). */ - debug_base = solib_svr4_r_ldsomap (info); + debug_base = this->find_r_ldsomap (info); if (debug_base != 0) { /* Add the dynamic linker's namespace unless we already did. */ if (info->solib_lists.find (debug_base) == info->solib_lists.end ()) { svr4_maybe_add_namespace (info, debug_base); - svr4_read_so_list (info, debug_base, 0, info->solib_lists[debug_base], - 0); + this->read_so_list (info, debug_base, 0, + info->solib_lists[debug_base], 0); } } @@ -1442,15 +1414,15 @@ svr4_current_sos_direct (struct svr4_info *info) /* Collect sos read and stored by the probes interface. */ -static owning_intrusive_list<solib> -svr4_collect_probes_sos (svr4_info *info) +owning_intrusive_list<solib> +svr4_solib_ops::collect_probes_sos (svr4_info *info) const { owning_intrusive_list<solib> res; for (const auto &tuple : info->solib_lists) { const std::vector<svr4_so> &sos = tuple.second; - res.splice (so_list_from_svr4_sos (sos)); + res.splice (this->solibs_from_svr4_sos (sos)); } return res; @@ -1459,26 +1431,26 @@ svr4_collect_probes_sos (svr4_info *info) /* Implement the main part of the "current_sos" solib_ops method. */ -static owning_intrusive_list<solib> -svr4_current_sos_1 (svr4_info *info) +owning_intrusive_list<solib> +svr4_solib_ops::current_sos_1 (svr4_info *info) const { owning_intrusive_list<solib> sos; /* If we're using the probes interface, we can use the cache as it will be maintained by probe update/reload actions. */ if (info->probes_table != nullptr) - sos = svr4_collect_probes_sos (info); + sos = this->collect_probes_sos (info); /* If we're not using the probes interface or if we didn't cache anything, read the sos to fill the cache, then collect them from the cache. */ if (sos.empty ()) { - svr4_current_sos_direct (info); + this->current_sos_direct (info); - sos = svr4_collect_probes_sos (info); + sos = this->collect_probes_sos (info); if (sos.empty ()) - sos = svr4_default_sos (info); + sos = this->default_sos (info); } return sos; @@ -1486,11 +1458,11 @@ svr4_current_sos_1 (svr4_info *info) /* Implement the "current_sos" solib_ops method. */ -static owning_intrusive_list<solib> -svr4_current_sos () +owning_intrusive_list<solib> +svr4_solib_ops::current_sos () const { svr4_info *info = get_svr4_info (current_program_space); - owning_intrusive_list<solib> sos = svr4_current_sos_1 (info); + owning_intrusive_list<solib> sos = this->current_sos_1 (info); struct mem_range vsyscall_range; /* Filter out the vDSO module, if present. Its symbol file would @@ -1728,12 +1700,20 @@ glibc_link_map_to_tls_module_id (CORE_ADDR lm_addr) static void tls_maybe_fill_slot (solib &so) { + auto *li = dynamic_cast<lm_info_svr4 *> (so.lm_info.get ()); + if (li == nullptr) + return; + struct svr4_info *info = get_svr4_info (current_program_space); if (!info->glibc_tls_slots_inited) { /* Cause svr4_current_sos() to be run if it hasn't been already. */ if (info->main_lm_addr == 0) - svr4_current_sos_direct (info); + { + auto &ops + = gdb::checked_static_cast<const svr4_solib_ops &> (so.ops ()); + ops.current_sos_direct (info); + } /* Quit early when main_lm_addr is still 0. */ if (info->main_lm_addr == 0) @@ -1753,7 +1733,6 @@ tls_maybe_fill_slot (solib &so) auto it = std::find (info->glibc_tls_slots.begin (), info->glibc_tls_slots.end (), 0); - auto *li = gdb::checked_static_cast<lm_info_svr4 *> (so.lm_info.get ()); if (it == info->glibc_tls_slots.end ()) info->glibc_tls_slots.push_back (li->lm_addr); else @@ -1771,8 +1750,11 @@ tls_maybe_erase_slot (program_space *pspace, const solib &so, if (still_in_use) return; + auto *li = dynamic_cast<lm_info_svr4 *> (so.lm_info.get ()); + if (li == nullptr) + return; + struct svr4_info *info = get_svr4_info (pspace); - auto *li = gdb::checked_static_cast<lm_info_svr4 *> (so.lm_info.get ()); auto it = std::find (info->glibc_tls_slots.begin (), info->glibc_tls_slots.end (), li->lm_addr); @@ -1798,11 +1780,11 @@ match_main (const char *soname) return (0); } -/* Return 1 if PC lies in the dynamic symbol resolution code of the +/* Return true if PC lies in the dynamic symbol resolution code of the SVR4 run time loader. */ -int -svr4_in_dynsym_resolve_code (CORE_ADDR pc) +bool +svr4_solib_ops::in_dynsym_resolve_code (CORE_ADDR pc) const { struct svr4_info *info = get_svr4_info (current_program_space); @@ -2001,12 +1983,10 @@ solib_event_probe_action (struct probe_and_action *pa) shared objects from the inferior. Handle special cases relating to the first elements of the list. Returns nonzero on success. */ -static int -solist_update_full (struct svr4_info *info) +void +svr4_solib_ops::update_full (svr4_info *info) const { - svr4_current_sos_direct (info); - - return 1; + this->current_sos_direct (info); } /* Update the shared object list starting from the link-map entry @@ -2014,9 +1994,9 @@ solist_update_full (struct svr4_info *info) nonzero if the list was successfully updated, or zero to indicate failure. */ -static int -solist_update_incremental (svr4_info *info, CORE_ADDR debug_base, - CORE_ADDR lm) +int +svr4_solib_ops::update_incremental (svr4_info *info, CORE_ADDR debug_base, + CORE_ADDR lm) const { /* Fall back to a full update if we are using a remote target that does not support incremental transfers. */ @@ -2094,7 +2074,7 @@ solist_update_incremental (svr4_info *info, CORE_ADDR debug_base, above check and deferral to solist_update_full ensures that this call to svr4_read_so_list will never see the first element. */ - if (!svr4_read_so_list (info, lm, prev_lm, solist, 0)) + if (!this->read_so_list (info, lm, prev_lm, solist, 0)) return 0; } @@ -2105,8 +2085,8 @@ solist_update_incremental (svr4_info *info, CORE_ADDR debug_base, original interface. We don't reset the breakpoints as the ones set up for the probes-based interface are adequate. */ -static void -disable_probes_interface (svr4_info *info) +void +svr4_solib_ops::disable_probes_interface (svr4_info *info) const { warning (_("Probes-based dynamic linker interface failed.\n" "Reverting to original interface.")); @@ -2121,8 +2101,8 @@ disable_probes_interface (svr4_info *info) probes-based linker interface. Do nothing if using the standard interface. */ -static void -svr4_handle_solib_event (void) +void +svr4_solib_ops::handle_event () const { struct svr4_info *info = get_svr4_info (current_program_space); struct probe_and_action *pa; @@ -2147,9 +2127,9 @@ svr4_handle_solib_event (void) /* If anything goes wrong we revert to the original linker interface. */ - auto cleanup = make_scope_exit ([info] () + auto cleanup = make_scope_exit ([this, info] () { - disable_probes_interface (info); + this->disable_probes_interface (info); }); action = solib_event_probe_action (pa); @@ -2251,15 +2231,12 @@ svr4_handle_solib_event (void) if (action == UPDATE_OR_RELOAD) { - if (!solist_update_incremental (info, debug_base, lm)) + if (!this->update_incremental (info, debug_base, lm)) action = FULL_RELOAD; } if (action == FULL_RELOAD) - { - if (!solist_update_full (info)) - return; - } + this->update_full (info); cleanup.release (); } @@ -2306,8 +2283,8 @@ svr4_update_solib_event_breakpoint (struct breakpoint *b) /* Enable or disable optional solib event breakpoints as appropriate. Called whenever stop_on_solib_events is changed. */ -static void -svr4_update_solib_event_breakpoints (void) +void +svr4_solib_ops::update_breakpoints () const { for (breakpoint &bp : all_breakpoints_safe ()) svr4_update_solib_event_breakpoint (&bp); @@ -2318,10 +2295,10 @@ svr4_update_solib_event_breakpoints (void) solib event breakpoint will be created and registered for each probe. */ -static void -svr4_create_probe_breakpoints (svr4_info *info, struct gdbarch *gdbarch, - const std::vector<probe *> *probes, - struct objfile *objfile) +void +svr4_solib_ops::create_probe_breakpoints (svr4_info *info, gdbarch *gdbarch, + const std::vector<probe *> *probes, + objfile *objfile) const { for (int i = 0; i < NUM_PROBES; i++) { @@ -2339,17 +2316,17 @@ svr4_create_probe_breakpoints (svr4_info *info, struct gdbarch *gdbarch, } } - svr4_update_solib_event_breakpoints (); + this->update_breakpoints (); } /* Find all the glibc named probes. Only if all of the probes are found, then create them and return true. Otherwise return false. If WITH_PREFIX is set then add "rtld" to the front of the probe names. */ -static bool -svr4_find_and_create_probe_breakpoints (svr4_info *info, - struct gdbarch *gdbarch, - struct obj_section *os, - bool with_prefix) +bool +svr4_solib_ops::find_and_create_probe_breakpoints (svr4_info *info, + gdbarch *gdbarch, + obj_section *os, + bool with_prefix) const { SOLIB_SCOPED_DEBUG_START_END ("objfile=%s, with_prefix=%d", os->objfile->original_name, with_prefix); @@ -2427,7 +2404,7 @@ svr4_find_and_create_probe_breakpoints (svr4_info *info, /* All probes found. Now create them. */ solib_debug_printf ("using probes interface"); - svr4_create_probe_breakpoints (info, gdbarch, probes, os->objfile); + this->create_probe_breakpoints (info, gdbarch, probes, os->objfile); return true; } @@ -2443,15 +2420,16 @@ svr4_find_and_create_probe_breakpoints (svr4_info *info, probes aren't found, a single breakpoint is set on the original marker function. */ -static void -svr4_create_solib_event_breakpoints (svr4_info *info, struct gdbarch *gdbarch, - CORE_ADDR address) +void +svr4_solib_ops::create_event_breakpoints (svr4_info *info, gdbarch *gdbarch, + CORE_ADDR address) const { struct obj_section *os = find_pc_section (address); if (os == nullptr - || (!svr4_find_and_create_probe_breakpoints (info, gdbarch, os, false) - && !svr4_find_and_create_probe_breakpoints (info, gdbarch, os, true))) + || (!this->find_and_create_probe_breakpoints (info, gdbarch, os, false) + && !this->find_and_create_probe_breakpoints (info, gdbarch, os, + true))) { solib_debug_printf ("falling back to r_brk breakpoint: addr=%s", paddress (gdbarch, address)); @@ -2491,8 +2469,8 @@ svr4_create_solib_event_breakpoints (svr4_info *info, struct gdbarch *gdbarch, depending upon whether or not the library is being mapped or unmapped, and then set to RT_CONSISTENT after the library is mapped/unmapped. */ -static int -enable_break (struct svr4_info *info, int from_tty) +int +svr4_solib_ops::enable_break (svr4_info *info, int from_tty) const { const char * const *bkpt_namep; asection *interp_sect; @@ -2508,8 +2486,8 @@ enable_break (struct svr4_info *info, int from_tty) solib_add (NULL, from_tty, auto_solib_add); sym_addr = 0; - if (info->debug_base && solib_svr4_r_map (info->debug_base) != 0) - sym_addr = solib_svr4_r_brk (info); + if (info->debug_base && this->read_r_map (info->debug_base) != 0) + sym_addr = this->find_r_brk (info); if (sym_addr != 0) { @@ -2568,8 +2546,8 @@ enable_break (struct svr4_info *info, int from_tty) = info->interp_plt_sect_low + bfd_section_size (interp_sect); } - svr4_create_solib_event_breakpoints - (info, current_inferior ()->arch (), sym_addr); + this->create_event_breakpoints (info, current_inferior ()->arch (), + sym_addr); return 1; } } @@ -2617,11 +2595,11 @@ enable_break (struct svr4_info *info, int from_tty) address from the shared library table. */ for (const solib &so : current_program_space->solibs ()) { - if (svr4_same_1 (interp_name, so.so_original_name.c_str ())) + if (svr4_same_1 (interp_name, so.original_name.c_str ())) { load_addr_found = 1; loader_found_in_list = 1; - load_addr = lm_addr_check (so, tmp_bfd.get ()); + load_addr = this->lm_addr_check (so, tmp_bfd.get ()); break; } } @@ -2677,7 +2655,7 @@ enable_break (struct svr4_info *info, int from_tty) if (!loader_found_in_list) { - info->debug_loader_name = xstrdup (interp_name); + info->debug_loader_name = interp_name; info->debug_loader_offset_p = 1; info->debug_loader_offset = load_addr; solib_add (NULL, from_tty, auto_solib_add); @@ -2728,9 +2706,8 @@ enable_break (struct svr4_info *info, int from_tty) if (sym_addr != 0) { - svr4_create_solib_event_breakpoints (info, - current_inferior ()->arch (), - load_addr + sym_addr); + this->create_event_breakpoints (info, current_inferior ()->arch (), + load_addr + sym_addr); return 1; } @@ -2738,8 +2715,8 @@ enable_break (struct svr4_info *info, int from_tty) linker. Warn and drop into the old code. */ bkpt_at_symbol: warning (_("Unable to find dynamic linker breakpoint function.\n" - "GDB will be unable to debug shared library initializers\n" - "and track explicitly loaded dynamic code.")); + "GDB will be unable to debug shared library initializers\n" + "and track explicitly loaded dynamic code.")); } /* Scan through the lists of symbols, trying to look up the symbol and @@ -2757,9 +2734,8 @@ enable_break (struct svr4_info *info, int from_tty) sym_addr = gdbarch_convert_from_func_ptr_addr (current_inferior ()->arch (), sym_addr, current_inferior ()->top_target ()); - svr4_create_solib_event_breakpoints (info, - current_inferior ()->arch (), - sym_addr); + this->create_event_breakpoints (info, current_inferior ()->arch (), + sym_addr); return 1; } } @@ -2777,8 +2753,9 @@ enable_break (struct svr4_info *info, int from_tty) sym_addr = gdbarch_convert_from_func_ptr_addr (current_inferior ()->arch (), sym_addr, current_inferior ()->top_target ()); - svr4_create_solib_event_breakpoints - (info, current_inferior ()->arch (), sym_addr); + this->create_event_breakpoints (info, + current_inferior ()->arch (), + sym_addr); return 1; } } @@ -3302,15 +3279,15 @@ svr4_relocate_main_executable (void) addresses, and saving sufficient information about them to allow their symbols to be read at a later time. */ -static void -svr4_solib_create_inferior_hook (int from_tty) +void +svr4_solib_ops::create_inferior_hook (int from_tty) const { struct svr4_info *info; info = get_svr4_info (current_program_space); /* Clear the probes-based interface's state. */ - free_probes_table (info); + this->free_probes_table (info); info->solib_lists.clear (); info->namespace_id.clear (); info->active_namespaces.clear (); @@ -3323,22 +3300,18 @@ svr4_solib_create_inferior_hook (int from_tty) if (!target_has_execution ()) return; - if (!svr4_have_link_map_offsets ()) - return; - - if (!enable_break (info, from_tty)) + if (!this->enable_break (info, from_tty)) return; } -static void -svr4_clear_solib (program_space *pspace) +void +svr4_solib_ops::clear_solib (program_space *pspace) const { svr4_info *info = get_svr4_info (pspace); info->debug_base = 0; info->debug_loader_offset_p = 0; info->debug_loader_offset = 0; - xfree (info->debug_loader_name); - info->debug_loader_name = NULL; + info->debug_loader_name.clear (); } /* Clear any bits of ADDR that wouldn't fit in a target-format @@ -3395,15 +3368,15 @@ find_loadable_elf_internal_phdr (bfd *abfd, bfd_section *asect) return nullptr; } -/* Implement solib_ops::relocate_section_addresses() for svr4 targets. */ - -static void -svr4_relocate_section_addresses (solib &so, target_section *sec) +void +svr4_solib_ops::relocate_section_addresses (solib &so, + target_section *sec) const { bfd *abfd = sec->the_bfd_section->owner; - sec->addr = svr4_truncate_ptr (sec->addr + lm_addr_check (so, abfd)); - sec->endaddr = svr4_truncate_ptr (sec->endaddr + lm_addr_check (so, abfd)); + sec->addr = svr4_truncate_ptr (sec->addr + this->lm_addr_check (so, abfd)); + sec->endaddr + = svr4_truncate_ptr (sec->endaddr + this->lm_addr_check (so, abfd)); struct bfd_section *asect = sec->the_bfd_section; gdb_assert (asect != nullptr); @@ -3473,68 +3446,24 @@ svr4_relocate_section_addresses (solib &so, target_section *sec) } } } - -/* Architecture-specific operations. */ - -struct solib_svr4_ops -{ - /* Return a description of the layout of `struct link_map'. */ - struct link_map_offsets *(*fetch_link_map_offsets)(void) = nullptr; -}; - -/* Per-architecture data key. */ -static const registry<gdbarch>::key<struct solib_svr4_ops> solib_svr4_data; - -/* Return a default for the architecture-specific operations. */ - -static struct solib_svr4_ops * -get_ops (struct gdbarch *gdbarch) -{ - struct solib_svr4_ops *ops = solib_svr4_data.get (gdbarch); - if (ops == nullptr) - ops = solib_svr4_data.emplace (gdbarch); - return ops; -} - -/* Set the architecture-specific `struct link_map_offsets' fetcher for - GDBARCH to FLMO. Also, install SVR4 solib_ops into GDBARCH. */ +/* See solib-svr4.h. */ void -set_solib_svr4_fetch_link_map_offsets (struct gdbarch *gdbarch, - struct link_map_offsets *(*flmo) (void)) +set_solib_svr4_ops (gdbarch *gdbarch, gdbarch_make_solib_ops_ftype make_solib_ops) { - struct solib_svr4_ops *ops = get_ops (gdbarch); - - ops->fetch_link_map_offsets = flmo; - - set_gdbarch_so_ops (gdbarch, &svr4_so_ops); + set_gdbarch_make_solib_ops (gdbarch, make_solib_ops); set_gdbarch_iterate_over_objfiles_in_search_order (gdbarch, svr4_iterate_over_objfiles_in_search_order); } -/* Fetch a link_map_offsets structure using the architecture-specific - `struct link_map_offsets' fetcher. */ - -static struct link_map_offsets * -svr4_fetch_link_map_offsets (void) -{ - struct solib_svr4_ops *ops = get_ops (current_inferior ()->arch ()); - - gdb_assert (ops->fetch_link_map_offsets); - return ops->fetch_link_map_offsets (); -} - -/* Return 1 if a link map offset fetcher has been defined, 0 otherwise. */ +/* See solib-svr4.h. */ -static int -svr4_have_link_map_offsets (void) +solib_ops_up +make_svr4_ilp32_solib_ops () { - struct solib_svr4_ops *ops = get_ops (current_inferior ()->arch ()); - - return (ops->fetch_link_map_offsets != NULL); + return std::make_unique<ilp32_svr4_solib_ops> (); } - /* Most OS'es that have SVR4-style ELF dynamic libraries define a `struct r_debug' and a `struct link_map' that are binary compatible @@ -3543,8 +3472,8 @@ svr4_have_link_map_offsets (void) /* Fetch (and possibly build) an appropriate `struct link_map_offsets' for an ILP32 SVR4 system. */ -struct link_map_offsets * -svr4_ilp32_fetch_link_map_offsets (void) +link_map_offsets * +ilp32_svr4_solib_ops::fetch_link_map_offsets () const { static struct link_map_offsets lmo; static struct link_map_offsets *lmp = NULL; @@ -3572,11 +3501,26 @@ svr4_ilp32_fetch_link_map_offsets (void) return lmp; } +/* solib_ops for LP64 SVR4 systems. */ + +struct lp64_svr4_solib_ops : public svr4_solib_ops +{ + link_map_offsets *fetch_link_map_offsets () const override; +}; + +/* See solib-svr4.h. */ + +solib_ops_up +make_svr4_lp64_solib_ops () +{ + return std::make_unique<lp64_svr4_solib_ops> (); +} + /* Fetch (and possibly build) an appropriate `struct link_map_offsets' for an LP64 SVR4 system. */ -struct link_map_offsets * -svr4_lp64_fetch_link_map_offsets (void) +link_map_offsets * +lp64_svr4_solib_ops::fetch_link_map_offsets () const { static struct link_map_offsets lmo; static struct link_map_offsets *lmp = NULL; @@ -3638,22 +3582,20 @@ find_debug_base_for_solib (const solib *solib) if (solib == nullptr) return 0; - svr4_info *info = get_svr4_info (current_program_space); + /* This is always called for solibs with an associated objfile. */ + gdb_assert (solib->objfile != nullptr); + + svr4_info *info = get_svr4_info (solib->objfile->pspace ()); gdb_assert (info != nullptr); auto *lm_info = gdb::checked_static_cast<const lm_info_svr4 *> (solib->lm_info.get ()); - for (const auto &tuple : info->solib_lists) - { - CORE_ADDR debug_base = tuple.first; - const std::vector<svr4_so> &sos = tuple.second; - - for (const svr4_so &so : sos) - if (svr4_same (solib->so_original_name.c_str (), so.name.c_str (), - *lm_info, *so.lm_info)) - return debug_base; - } + for (const auto &[debug_base, sos] : info->solib_lists) + for (const svr4_so &so : sos) + if (svr4_same (solib->original_name.c_str (), so.name.c_str (), *lm_info, + *so.lm_info)) + return debug_base; return 0; } @@ -3723,19 +3665,15 @@ svr4_iterate_over_objfiles_in_search_order } } -/* See solib_ops::find_solib_addr in solist.h. */ - -static std::optional<CORE_ADDR> -svr4_find_solib_addr (solib &so) +std::optional<CORE_ADDR> +svr4_solib_ops::find_solib_addr (solib &so) const { auto *li = gdb::checked_static_cast<lm_info_svr4 *> (so.lm_info.get ()); return li->l_addr_inferior; } -/* See solib_ops::find_solib_ns in solist.h. */ - -static int -svr4_find_solib_ns (const solib &so) +int +svr4_solib_ops::find_solib_ns (const solib &so) const { CORE_ADDR debug_base = find_debug_base_for_solib (&so); svr4_info *info = get_svr4_info (current_program_space); @@ -3750,17 +3688,15 @@ svr4_find_solib_ns (const solib &so) error (_("No namespace found")); } -/* see solib_ops::num_active_namespaces in solist.h. */ -static int -svr4_num_active_namespaces () +int +svr4_solib_ops::num_active_namespaces () const { svr4_info *info = get_svr4_info (current_program_space); return info->active_namespaces.size (); } -/* See solib_ops::get_solibs_in_ns in solist.h. */ -static std::vector<const solib *> -svr4_get_solibs_in_ns (int nsid) +std::vector<const solib *> +svr4_solib_ops::get_solibs_in_ns (int nsid) const { std::vector<const solib*> ns_solibs; svr4_info *info = get_svr4_info (current_program_space); @@ -3779,11 +3715,8 @@ svr4_get_solibs_in_ns (int nsid) CORE_ADDR debug_base = info->namespace_id[nsid]; std::unordered_map<std::string, const lm_info_svr4 *> namespace_solibs; for (svr4_so &so : info->solib_lists[debug_base]) - { - namespace_solibs[so.name] - = gdb::checked_static_cast<const lm_info_svr4 *> - (so.lm_info.get ()); - } + namespace_solibs[so.name] = so.lm_info.get (); + for (const solib &so: current_program_space->solibs ()) { auto *lm_inferior @@ -3792,43 +3725,21 @@ svr4_get_solibs_in_ns (int nsid) /* This is inspired by the svr4_same, by finding the svr4_so object in the map, and then double checking if the lm_info is considered the same. */ - if (namespace_solibs.count (so.so_original_name) > 0 - && namespace_solibs[so.so_original_name]->l_addr_inferior + if (namespace_solibs.count (so.original_name) > 0 + && namespace_solibs[so.original_name]->l_addr_inferior == lm_inferior->l_addr_inferior) { ns_solibs.push_back (&so); /* Remove the SO from the map, so that we don't end up printing the dynamic linker multiple times. */ - namespace_solibs.erase (so.so_original_name); + namespace_solibs.erase (so.original_name); } } return ns_solibs; } -const struct solib_ops svr4_so_ops = -{ - svr4_relocate_section_addresses, - svr4_clear_so, - svr4_clear_solib, - svr4_solib_create_inferior_hook, - svr4_current_sos, - open_symbol_file_object, - svr4_in_dynsym_resolve_code, - solib_bfd_open, - svr4_same, - svr4_keep_data_in_core, - svr4_update_solib_event_breakpoints, - svr4_handle_solib_event, - svr4_find_solib_addr, - svr4_find_solib_ns, - svr4_num_active_namespaces, - svr4_get_solibs_in_ns, -}; - -void _initialize_svr4_solib (); -void -_initialize_svr4_solib () +INIT_GDB_FILE (svr4_solib) { gdb::observers::free_objfile.attach (svr4_free_objfile_observer, "solib-svr4"); diff --git a/gdb/solib-svr4.h b/gdb/solib-svr4.h index e59c8e4..7235fd9 100644 --- a/gdb/solib-svr4.h +++ b/gdb/solib-svr4.h @@ -20,14 +20,17 @@ #ifndef GDB_SOLIB_SVR4_H #define GDB_SOLIB_SVR4_H -#include "solist.h" +#include "gdbarch.h" +#include "solib.h" struct objfile; -struct solib_ops; +struct link_map_offsets; +struct probe_and_action; +struct svr4_info; +struct svr4_library_list; +struct svr4_so; -extern const solib_ops svr4_so_ops; - -/* Link map info to include in an allocated so_list entry. */ +/* Link map info to include in an allocated solib entry. */ struct lm_info_svr4 final : public lm_info { @@ -50,6 +53,93 @@ struct lm_info_svr4 final : public lm_info using lm_info_svr4_up = std::unique_ptr<lm_info_svr4>; +/* What to do when a probe stop occurs. */ + +enum probe_action +{ + /* Something went seriously wrong. Stop using probes and + revert to using the older interface. */ + PROBES_INTERFACE_FAILED, + + /* No action is required. The shared object list is still + valid. */ + DO_NOTHING, + + /* The shared object list should be reloaded entirely. */ + FULL_RELOAD, + + /* Attempt to incrementally update the shared object list. If + the update fails or is not possible, fall back to reloading + the list in full. */ + UPDATE_OR_RELOAD, +}; + +/* solib_ops for SVR4 systems. */ + +struct svr4_solib_ops : public solib_ops +{ + void relocate_section_addresses (solib &so, target_section *) const override; + void clear_so (const solib &so) const override; + void clear_solib (program_space *pspace) const override; + void create_inferior_hook (int from_tty) const override; + owning_intrusive_list<solib> current_sos () const override; + bool open_symbol_file_object (int from_tty) const override; + bool in_dynsym_resolve_code (CORE_ADDR pc) const override; + bool same (const solib &gdb, const solib &inferior) const override; + bool keep_data_in_core (CORE_ADDR vaddr, unsigned long size) const override; + void update_breakpoints () const override; + void handle_event () const override; + std::optional<CORE_ADDR> find_solib_addr (solib &so) const override; + bool supports_namespaces () const override { return true; } + int find_solib_ns (const solib &so) const override; + int num_active_namespaces () const override; + std::vector<const solib *> get_solibs_in_ns (int nsid) const override; + + /* Return the appropriate link map offsets table for the architecture. */ + virtual link_map_offsets *fetch_link_map_offsets () const = 0; + + /* This needs to be public because it's accessed from an observer. */ + void current_sos_direct (svr4_info *info) const; + +private: + void create_probe_breakpoints (svr4_info *info, gdbarch *gdbarch, + const std::vector<probe *> *probes, + objfile *objfile) const; + bool find_and_create_probe_breakpoints (svr4_info *info, gdbarch *gdbarch, + obj_section *os, + bool with_prefix) const; + void create_event_breakpoints (svr4_info *info, gdbarch *gdbarch, + CORE_ADDR address) const; + int enable_break (svr4_info *info, int from_tty) const; + void free_probes_table (svr4_info *info) const; + CORE_ADDR find_r_brk (svr4_info *info) const; + CORE_ADDR find_r_ldsomap (svr4_info *info) const; + owning_intrusive_list<solib> default_sos (svr4_info *info) const; + int read_so_list (svr4_info *info, CORE_ADDR lm, CORE_ADDR prev_lm, + std::vector<svr4_so> &sos, int ignore_first) const; + lm_info_svr4_up read_lm_info (CORE_ADDR lm_addr) const; + int has_lm_dynamic_from_link_map () const; + CORE_ADDR lm_addr_check (const solib &so, bfd *abfd) const; + CORE_ADDR read_r_next (CORE_ADDR debug_base) const; + CORE_ADDR read_r_map (CORE_ADDR debug_base) const; + owning_intrusive_list<solib> collect_probes_sos (svr4_info *info) const; + owning_intrusive_list<solib> current_sos_1 (svr4_info *info) const; + owning_intrusive_list<solib> solibs_from_svr4_sos + (const std::vector<svr4_so> &sos) const; + void disable_probes_interface (svr4_info *info) const; + void update_full (svr4_info *info) const; + int update_incremental (svr4_info *info, CORE_ADDR debug_base, + CORE_ADDR lm) const; + bool update_event_breakpoint (breakpoint *b) const; +}; + +/* solib_ops for ILP32 SVR4 systems. */ + +struct ilp32_svr4_solib_ops : public svr4_solib_ops +{ + link_map_offsets *fetch_link_map_offsets () const override; +}; + /* Critical offsets and sizes which describe struct r_debug and struct link_map on SVR4-like targets. All offsets and sizes are in bytes unless otherwise specified. */ @@ -91,26 +181,22 @@ struct link_map_offsets int l_name_offset; }; -/* set_solib_svr4_fetch_link_map_offsets() is intended to be called by - a <arch>_gdbarch_init() function. It is used to establish an - architecture specific link_map_offsets fetcher for the architecture - being defined. */ +/* Set the gdbarch methods for SVR4 systems. */ -extern void set_solib_svr4_fetch_link_map_offsets - (struct gdbarch *gdbarch, struct link_map_offsets *(*func) (void)); +extern void set_solib_svr4_ops (gdbarch *gdbarch, + gdbarch_make_solib_ops_ftype make_solib_ops); /* This function is called by thread_db.c. Return the address of the link map for the given objfile. */ extern CORE_ADDR svr4_fetch_objfile_link_map (struct objfile *objfile); -/* Fetch (and possibly build) an appropriate `struct link_map_offsets' - for ILP32 and LP64 SVR4 systems. */ -extern struct link_map_offsets *svr4_ilp32_fetch_link_map_offsets (void); -extern struct link_map_offsets *svr4_lp64_fetch_link_map_offsets (void); +/* Return a new solib_ops for ILP32 SVR4 systems. */ + +extern solib_ops_up make_svr4_ilp32_solib_ops (); + +/* Return a new solib_ops for LP64 SVR4 systems. */ -/* Return 1 if PC lies in the dynamic symbol resolution code of the - SVR4 run time loader. */ -int svr4_in_dynsym_resolve_code (CORE_ADDR pc); +extern solib_ops_up make_svr4_lp64_solib_ops (); /* For the MUSL C library, given link map address LM_ADDR, return the corresponding TLS module id, or 0 if not found. */ diff --git a/gdb/solib-target.c b/gdb/solib-target.c index f304431..770028d 100644 --- a/gdb/solib-target.c +++ b/gdb/solib-target.c @@ -18,7 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "objfiles.h" -#include "solist.h" +#include "solib.h" #include "symtab.h" #include "symfile.h" #include "target.h" @@ -30,7 +30,7 @@ struct lm_info_target final : public lm_info { /* The library's name. The name is normally kept in the struct - so_list; it is only here during XML parsing. */ + solib; it is only here during XML parsing. */ std::string name; /* The target can either specify segment bases or section bases, not @@ -226,8 +226,8 @@ solib_target_parse_libraries (const char *library) } #endif -static owning_intrusive_list<solib> -solib_target_current_sos (void) +owning_intrusive_list<solib> +target_solib_ops::current_sos () const { owning_intrusive_list<solib> sos; @@ -245,25 +245,20 @@ solib_target_current_sos (void) /* Build a struct solib for each entry on the list. */ for (lm_info_target_up &info : library_list) { - auto &new_solib = sos.emplace_back (); + auto &new_solib = sos.emplace_back (*this); /* We don't need a copy of the name in INFO anymore. */ - new_solib.so_name = std::move (info->name); - new_solib.so_original_name = new_solib.so_name; + new_solib.name = std::move (info->name); + new_solib.original_name = new_solib.name; new_solib.lm_info = std::move (info); } return sos; } -static void -solib_target_solib_create_inferior_hook (int from_tty) -{ - /* Nothing needed. */ -} - -static void -solib_target_relocate_section_addresses (solib &so, target_section *sec) +void +target_solib_ops::relocate_section_addresses (solib &so, + target_section *sec) const { CORE_ADDR offset; auto *li = gdb::checked_static_cast<lm_info_target *> (so.lm_info.get ()); @@ -291,7 +286,7 @@ solib_target_relocate_section_addresses (solib &so, target_section *sec) if (num_alloc_sections != li->section_bases.size ()) warning (_("\ Could not relocate shared library \"%s\": wrong number of ALLOC sections"), - so.so_name.c_str ()); + so.name.c_str ()); else { int bases_index = 0; @@ -334,7 +329,7 @@ Could not relocate shared library \"%s\": wrong number of ALLOC sections"), if (data == NULL) warning (_("\ -Could not relocate shared library \"%s\": no segments"), so.so_name.c_str ()); +Could not relocate shared library \"%s\": no segments"), so.name.c_str ()); else { ULONGEST orig_delta; @@ -345,7 +340,7 @@ Could not relocate shared library \"%s\": no segments"), so.so_name.c_str ()); li->segment_bases.size (), li->segment_bases.data ())) warning (_("\ -Could not relocate shared library \"%s\": bad offsets"), so.so_name.c_str ()); +Could not relocate shared library \"%s\": bad offsets"), so.name.c_str ()); /* Find the range of addresses to report for this library in "info sharedlibrary". Report any consecutive segments @@ -382,16 +377,8 @@ Could not relocate shared library \"%s\": bad offsets"), so.so_name.c_str ()); sec->endaddr += offset; } -static int -solib_target_open_symbol_file_object (int from_tty) -{ - /* We can't locate the main symbol file based on the target's - knowledge; the user has to specify it. */ - return 0; -} - -static int -solib_target_in_dynsym_resolve_code (CORE_ADDR pc) +bool +target_solib_ops::in_dynsym_resolve_code (CORE_ADDR pc) const { /* We don't have a range of addresses for the dynamic linker; there may not be one in the program's address space. So only report @@ -399,19 +386,10 @@ solib_target_in_dynsym_resolve_code (CORE_ADDR pc) return in_plt_section (pc); } -const solib_ops solib_target_so_ops = +/* See solib-target.h. */ + +solib_ops_up +make_target_solib_ops () { - solib_target_relocate_section_addresses, - nullptr, - nullptr, - solib_target_solib_create_inferior_hook, - solib_target_current_sos, - solib_target_open_symbol_file_object, - solib_target_in_dynsym_resolve_code, - solib_bfd_open, - nullptr, - nullptr, - nullptr, - nullptr, - default_find_solib_addr, -}; + return std::make_unique<target_solib_ops> (); +} diff --git a/gdb/solib-target.h b/gdb/solib-target.h index f8a22fd..89ae2bc 100644 --- a/gdb/solib-target.h +++ b/gdb/solib-target.h @@ -20,7 +20,19 @@ #ifndef GDB_SOLIB_TARGET_H #define GDB_SOLIB_TARGET_H -struct solib_ops; -extern const solib_ops solib_target_so_ops; +#include "solib.h" + +/* solib_ops for systems fetching solibs from the target. */ + +struct target_solib_ops : solib_ops +{ + void relocate_section_addresses (solib &so, target_section *) const override; + owning_intrusive_list<solib> current_sos () const override; + bool in_dynsym_resolve_code (CORE_ADDR pc) const override; +}; + +/* Return a new solib_ops for systems fetching solibs from the target. */ + +solib_ops_up make_target_solib_ops (); #endif /* GDB_SOLIB_TARGET_H */ diff --git a/gdb/solib.c b/gdb/solib.c index 85ec6bb..3ec2032 100644 --- a/gdb/solib.c +++ b/gdb/solib.c @@ -37,7 +37,6 @@ #include "elf/common.h" #include "filenames.h" #include "exec.h" -#include "solist.h" #include "observable.h" #include "readline/tilde.h" #include "solib.h" @@ -63,8 +62,8 @@ show_solib_search_path (struct ui_file *file, int from_tty, struct cmd_list_element *c, const char *value) { gdb_printf (file, - _ ("The search path for loading non-absolute " - "shared library symbol files is %s.\n"), + _("The search path for loading non-absolute " + "shared library symbol files is %s.\n"), value); } @@ -421,7 +420,7 @@ solib_bfd_fopen (const char *pathname, int fd) if (abfd == NULL) { /* Arrange to free PATHNAME when the error is thrown. */ - error (_ ("Could not open `%s' as an executable file: %s"), pathname, + error (_("Could not open `%s' as an executable file: %s"), pathname, bfd_errmsg (bfd_get_error ())); } @@ -454,20 +453,26 @@ solib_bfd_open (const char *pathname) /* Check bfd format. */ if (!bfd_check_format (abfd.get (), bfd_object)) - error (_ ("`%s': not in executable format: %s"), + error (_("`%s': not in executable format: %s"), bfd_get_filename (abfd.get ()), bfd_errmsg (bfd_get_error ())); /* Check bfd arch. */ b = gdbarch_bfd_arch_info (current_inferior ()->arch ()); if (!b->compatible (b, bfd_get_arch_info (abfd.get ()))) - error (_ ("`%s': Shared library architecture %s is not compatible " - "with target architecture %s."), + error (_("`%s': Shared library architecture %s is not compatible " + "with target architecture %s."), bfd_get_filename (abfd.get ()), bfd_get_arch_info (abfd.get ())->printable_name, b->printable_name); return abfd; } +gdb_bfd_ref_ptr +solib_ops::bfd_open (const char *pathname) const +{ + return solib_bfd_open (pathname); +} + /* Given a pointer to one of the shared objects in our list of mapped objects, use the recorded name to open a bfd descriptor for the object, build a section table, relocate all the section addresses @@ -483,10 +488,8 @@ solib_bfd_open (const char *pathname) static int solib_map_sections (solib &so) { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); - - gdb::unique_xmalloc_ptr<char> filename (tilde_expand (so.so_name.c_str ())); - gdb_bfd_ref_ptr abfd (ops->bfd_open (filename.get ())); + gdb::unique_xmalloc_ptr<char> filename (tilde_expand (so.name.c_str ())); + gdb_bfd_ref_ptr abfd (so.ops ().bfd_open (filename.get ())); /* If we have a core target then the core target might have some helpful information (i.e. build-ids) about the shared libraries we are trying @@ -496,9 +499,9 @@ solib_map_sections (solib &so) If we don't have a core target then this will return an empty struct with no hint information, we then lookup the shared library based on its filename. */ - std::optional<CORE_ADDR> solib_addr = ops->find_solib_addr (so); + std::optional<CORE_ADDR> solib_addr = so.ops ().find_solib_addr (so); std::optional <const core_target_mapped_file_info> mapped_file_info - = core_target_find_mapped_file (so.so_name.c_str (), solib_addr); + = core_target_find_mapped_file (so.name.c_str (), solib_addr); /* If we already know the build-id of this solib from a core file, verify it matches ABFD's build-id. If there is a mismatch or the solib wasn't @@ -520,18 +523,18 @@ solib_map_sections (solib &so) However, if it was good enough during the mapped file processing, we assume it's good enough now. */ if (!mapped_file_info->filename ().empty ()) - abfd = ops->bfd_open (mapped_file_info->filename ().c_str ()); + abfd = so.ops ().bfd_open (mapped_file_info->filename ().c_str ()); else abfd = nullptr; if (abfd == nullptr) abfd = find_objfile_by_build_id (current_program_space, mapped_file_info->build_id (), - so.so_name.c_str ()); + so.name.c_str ()); if (abfd == nullptr && mismatch) { - warning (_ ("Build-id of %ps does not match core file."), + warning (_("Build-id of %ps does not match core file."), styled_string (file_name_style.style (), filename.get ())); abfd = nullptr; @@ -545,14 +548,14 @@ solib_map_sections (solib &so) /* Leave bfd open, core_xfer_memory and "info files" need it. */ so.abfd = std::move (abfd); - /* Copy the full path name into so_name, allowing symbol_file_add + /* Copy the full path name into `so.name`, allowing symbol_file_add to find it later. This also affects the =library-loaded GDB/MI event, and in particular the part of that notification providing the library's host-side path. If we let the target dictate that objfile's path, and the target is different from the host, GDB/MI will not provide the correct host-side path. */ - so.so_name = bfd_get_filename (so.abfd.get ()); + so.name = bfd_get_filename (so.abfd.get ()); so.sections = build_section_table (so.abfd.get ()); for (target_section &p : so.sections) @@ -560,7 +563,7 @@ solib_map_sections (solib &so) /* Relocate the section binding addresses as recorded in the shared object's file by the base address to which the object was actually mapped. */ - ops->relocate_section_addresses (so, &p); + so.ops ().relocate_section_addresses (so, &p); /* If the target didn't provide information about the address range of the shared object, assume we want the location of @@ -582,13 +585,11 @@ solib_map_sections (solib &so) return 1; } -/* See solist.h. */ +/* See solib.h. */ void solib::clear () { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); - this->sections.clear (); this->abfd = nullptr; @@ -600,11 +601,10 @@ solib::clear () /* Restore the target-supplied file name. SO_NAME may be the path of the symbol file. */ - this->so_name = this->so_original_name; + this->name = this->original_name; /* Do the same for target-specific data. */ - if (ops->clear_so != NULL) - ops->clear_so (*this); + this->ops ().clear_so (*this); } lm_info::~lm_info () = default; @@ -634,7 +634,7 @@ solib_read_symbols (solib &so, symfile_add_flags flags) so.objfile = nullptr; for (objfile *objfile : current_program_space->objfiles ()) { - if (filename_cmp (objfile_name (objfile), so.so_name.c_str ()) + if (filename_cmp (objfile_name (objfile), so.name.c_str ()) == 0 && objfile->addr_low == so.addr_low) { @@ -648,7 +648,7 @@ solib_read_symbols (solib &so, symfile_add_flags flags) = build_section_addr_info_from_section_table (so.sections); gdb_bfd_ref_ptr tmp_bfd = so.abfd; so.objfile - = symbol_file_add_from_bfd (tmp_bfd, so.so_name.c_str (), + = symbol_file_add_from_bfd (tmp_bfd, so.name.c_str (), flags, &sap, OBJF_SHARED, nullptr); so.objfile->addr_low = so.addr_low; } @@ -658,9 +658,9 @@ solib_read_symbols (solib &so, symfile_add_flags flags) catch (const gdb_exception_error &e) { exception_fprintf (gdb_stderr, e, - _ ("Error while reading shared" - " library symbols for %s:\n"), - so.so_name.c_str ()); + _("Error while reading shared" + " library symbols for %s:\n"), + so.name.c_str ()); } return true; @@ -712,7 +712,10 @@ notify_solib_unloaded (program_space *pspace, const solib &so, void update_solib_list (int from_tty) { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); + const solib_ops *ops = current_program_space->solib_ops (); + + if (ops == nullptr) + return; /* We can reach here due to changing solib-search-path or the sysroot, before having any inferior. */ @@ -724,7 +727,7 @@ update_solib_list (int from_tty) have not opened a symbol file, we may be able to get its symbols now! */ if (inf->attach_flag - && current_program_space->symfile_object_file == NULL) + && current_program_space->symfile_object_file == nullptr) { try { @@ -765,27 +768,16 @@ update_solib_list (int from_tty) owning_intrusive_list<solib> inferior = ops->current_sos (); owning_intrusive_list<solib>::iterator gdb_iter - = current_program_space->so_list.begin (); - while (gdb_iter != current_program_space->so_list.end ()) + = current_program_space->solibs ().begin (); + while (gdb_iter != current_program_space->solibs ().end ()) { intrusive_list<solib>::iterator inferior_iter = inferior.begin (); /* Check to see whether the shared object *gdb also appears in the inferior's current list. */ for (; inferior_iter != inferior.end (); ++inferior_iter) - { - if (ops->same) - { - if (ops->same (*gdb_iter, *inferior_iter)) - break; - } - else - { - if (!filename_cmp (gdb_iter->so_original_name.c_str (), - inferior_iter->so_original_name.c_str ())) - break; - } - } + if (ops->same (*gdb_iter, *inferior_iter)) + break; /* If the shared object appears on the inferior's list too, then it's still loaded, so we don't need to do anything. Delete @@ -814,13 +806,13 @@ update_solib_list (int from_tty) && !still_in_use) gdb_iter->objfile->unlink (); - current_program_space->deleted_solibs.push_back (gdb_iter->so_name); + current_program_space->deleted_solibs.push_back (gdb_iter->name); /* Some targets' section tables might be referring to sections from so.abfd; remove them. */ current_program_space->remove_target_sections (&*gdb_iter); - gdb_iter = current_program_space->so_list.erase (gdb_iter); + gdb_iter = current_program_space->solibs ().erase (gdb_iter); } } @@ -844,15 +836,15 @@ update_solib_list (int from_tty) { not_found++; if (not_found_filename == NULL) - not_found_filename = new_so.so_original_name.c_str (); + not_found_filename = new_so.original_name.c_str (); } } catch (const gdb_exception_error &e) { exception_fprintf (gdb_stderr, e, - _ ("Error while mapping shared " - "library sections:\n")); + _("Error while mapping shared " + "library sections:\n")); } /* Notify any observer that the shared object has been @@ -861,7 +853,7 @@ update_solib_list (int from_tty) } /* Add the new shared objects to GDB's list. */ - current_program_space->so_list.splice (std::move (inferior)); + current_program_space->solibs ().splice (std::move (inferior)); /* If a library was not found, issue an appropriate warning message. We have to use a single call to warning in case the @@ -871,15 +863,15 @@ update_solib_list (int from_tty) stand out well. */ if (not_found == 1) - warning (_ ("Could not load shared library symbols for %ps.\n" - "Do you need \"%ps\" or \"%ps\"?"), + warning (_("Could not load shared library symbols for %ps.\n" + "Do you need \"%ps\" or \"%ps\"?"), styled_string (file_name_style.style (), not_found_filename), styled_string (command_style.style (), "set solib-search-path"), styled_string (command_style.style (), "set sysroot")); else if (not_found > 1) - warning (_ ("\ + warning (_("\ Could not load shared library symbols for %d libraries, e.g. %ps.\n\ Use the \"%ps\" command to see the complete listing.\n\ Do you need \"%ps\" or \"%ps\"?"), @@ -918,7 +910,7 @@ libpthread_name_p (const char *name) static bool libpthread_solib_p (const solib &so) { - return libpthread_name_p (so.so_name.c_str ()); + return libpthread_name_p (so.name.c_str ()); } /* Read in symbolic information for any shared objects whose names @@ -937,11 +929,11 @@ solib_add (const char *pattern, int from_tty, int readsyms) { if (pattern != NULL) { - gdb_printf (_ ("Loading symbols for shared libraries: %s\n"), + gdb_printf (_("Loading symbols for shared libraries: %s\n"), pattern); } else - gdb_printf (_ ("Loading symbols for shared libraries.\n")); + gdb_printf (_("Loading symbols for shared libraries.\n")); } current_program_space->solib_add_generation++; @@ -951,7 +943,7 @@ solib_add (const char *pattern, int from_tty, int readsyms) char *re_err = re_comp (pattern); if (re_err) - error (_ ("Invalid regexp: %s"), re_err); + error (_("Invalid regexp: %s"), re_err); } update_solib_list (from_tty); @@ -968,7 +960,7 @@ solib_add (const char *pattern, int from_tty, int readsyms) add_flags |= SYMFILE_VERBOSE; for (solib &gdb : current_program_space->solibs ()) - if (!pattern || re_exec (gdb.so_name.c_str ())) + if (!pattern || re_exec (gdb.name.c_str ())) { /* Normally, we would read the symbols from that library only if READSYMS is set. However, we're making a small @@ -985,9 +977,9 @@ solib_add (const char *pattern, int from_tty, int readsyms) /* If no pattern was given, be quiet for shared libraries we have already loaded. */ if (pattern && (from_tty || info_verbose)) - gdb_printf (_ ("Symbols already loaded for %ps\n"), + gdb_printf (_("Symbols already loaded for %ps\n"), styled_string (file_name_style.style (), - gdb.so_name.c_str ())); + gdb.name.c_str ())); } else if (solib_read_symbols (gdb, add_flags)) loaded_any_symbols = true; @@ -1025,16 +1017,21 @@ print_solib_list_table (std::vector<const solib *> solib_list, gdbarch *gdbarch = current_inferior ()->arch (); /* "0x", a little whitespace, and two hex digits per byte of pointers. */ int addr_width = 4 + (gdbarch_ptr_bit (gdbarch) / 4); - const solib_ops *ops = gdbarch_so_ops (gdbarch); + const solib_ops *ops = current_program_space->solib_ops (); struct ui_out *uiout = current_uiout; bool so_missing_debug_info = false; + if (ops == nullptr) + return; + /* There are 3 conditions for this command to print solib namespaces, first PRINT_NAMESPACE has to be true, second the solib_ops has to support multiple namespaces, and third there must be more than one active namespace. Fold all these into the PRINT_NAMESPACE condition. */ - print_namespace = print_namespace && ops->num_active_namespaces != nullptr - && ops->num_active_namespaces () > 1; + print_namespace = (print_namespace + && ops != nullptr + && ops->supports_namespaces () + && ops->num_active_namespaces () > 1); int num_cols = 4; if (print_namespace) @@ -1056,7 +1053,7 @@ print_solib_list_table (std::vector<const solib *> solib_list, for (const solib *so : solib_list) { - if (so->so_name.empty ()) + if (so->name.empty ()) continue; ui_out_emit_tuple tuple_emitter (uiout, "lib"); @@ -1085,7 +1082,7 @@ print_solib_list_table (std::vector<const solib *> solib_list, } if (!top_level_interpreter ()->interp_ui_out ()->is_mi_like_p () - && so->symbols_loaded && !objfile_has_symbols (so->objfile)) + && so->symbols_loaded && !so->objfile->has_symbols ()) { so_missing_debug_info = true; uiout->field_string ("syms-read", "Yes (*)"); @@ -1093,15 +1090,15 @@ print_solib_list_table (std::vector<const solib *> solib_list, else uiout->field_string ("syms-read", so->symbols_loaded ? "Yes" : "No"); - uiout->field_string ("name", so->so_name, file_name_style.style ()); + uiout->field_string ("name", so->name, file_name_style.style ()); uiout->text ("\n"); } } if (so_missing_debug_info) - uiout->message (_ ("(*): Shared library is missing " - "debugging information.\n")); + uiout->message (_("(*): Shared library is missing " + "debugging information.\n")); } /* Implement the "info sharedlibrary" command. Walk through the @@ -1119,7 +1116,7 @@ info_sharedlibrary_command (const char *pattern, int from_tty) char *re_err = re_comp (pattern); if (re_err) - error (_ ("Invalid regexp: %s"), re_err); + error (_("Invalid regexp: %s"), re_err); } update_solib_list (from_tty); @@ -1130,9 +1127,9 @@ info_sharedlibrary_command (const char *pattern, int from_tty) std::vector<const solib *> print_libs; for (const solib &so : current_program_space->solibs ()) { - if (!so.so_name.empty ()) + if (!so.name.empty ()) { - if (pattern && !re_exec (so.so_name.c_str ())) + if (pattern && !re_exec (so.name.c_str ())) continue; print_libs.push_back (&so); } @@ -1143,9 +1140,9 @@ info_sharedlibrary_command (const char *pattern, int from_tty) if (print_libs.size () == 0) { if (pattern) - uiout->message (_ ("No shared libraries matched.\n")); + uiout->message (_("No shared libraries matched.\n")); else - uiout->message (_ ("No shared libraries loaded at this time.\n")); + uiout->message (_("No shared libraries loaded at this time.\n")); } } @@ -1159,23 +1156,22 @@ info_sharedlibrary_command (const char *pattern, int from_tty) static void info_linker_namespace_command (const char *pattern, int from_tty) { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); + const solib_ops *ops = current_program_space->solib_ops (); + /* This command only really makes sense for inferiors that support linker namespaces, so we can leave early. */ - if (ops->num_active_namespaces == nullptr) - error (_("Current inferior does not support linker namespaces." \ - "Use \"info sharedlibrary\" instead")); + if (ops == nullptr || !ops->supports_namespaces ()) + error (_("Current inferior does not support linker namespaces. " + "Use \"info sharedlibrary\" instead.")); struct ui_out *uiout = current_uiout; std::vector<std::pair<int, std::vector<const solib *>>> all_solibs_to_print; - if (pattern != nullptr) - while (*pattern == ' ') - pattern++; + pattern = skip_spaces (pattern); if (pattern == nullptr || pattern[0] == '\0') { - uiout->message (_ ("There are %d linker namespaces loaded\n"), + uiout->message (_("There are %d linker namespaces loaded\n"), ops->num_active_namespaces ()); int printed = 0; @@ -1199,13 +1195,13 @@ info_linker_namespace_command (const char *pattern, int from_tty) escape sequence must be doubled to survive the compiler pass. */ re_comp ("^\\[\\[[0-9]\\+\\]\\]$"); if (re_exec (pattern)) - ns = strtol (pattern+2, nullptr, 10); + ns = strtol (pattern + 2, nullptr, 10); else { - char * end = nullptr; + char *end = nullptr; ns = strtol (pattern, &end, 10); if (end[0] != '\0') - error (_ ("Invalid linker namespace identifier: %s"), pattern); + error (_("Invalid linker namespace identifier: %s"), pattern); } all_solibs_to_print.push_back @@ -1214,14 +1210,13 @@ info_linker_namespace_command (const char *pattern, int from_tty) bool ns_separator = false; - for (auto &solibs_pair : all_solibs_to_print) + for (const auto &[ns, solibs_to_print] : all_solibs_to_print) { if (ns_separator) uiout->message ("\n\n"); else ns_separator = true; - int ns = solibs_pair.first; - std::vector<const solib *> solibs_to_print = solibs_pair.second; + if (solibs_to_print.size () == 0) { uiout->message (_("Linker namespace [[%d]] is not active.\n"), ns); @@ -1230,10 +1225,10 @@ info_linker_namespace_command (const char *pattern, int from_tty) break; } uiout->message - (_ ("There are %zu libraries loaded in linker namespace [[%d]]\n"), + (_("There are %zu libraries loaded in linker namespace [[%d]]\n"), solibs_to_print.size (), ns); uiout->message - (_ ("Displaying libraries for linker namespace [[%d]]:\n"), ns); + (_("Displaying libraries for linker namespace [[%d]]:\n"), ns); print_solib_list_table (solibs_to_print, false); } @@ -1265,24 +1260,28 @@ solib_contains_address_p (const solib &solib, CORE_ADDR address) const char * solib_name_from_address (struct program_space *pspace, CORE_ADDR address) { - for (const solib &so : pspace->so_list) + for (const solib &so : pspace->solibs ()) if (solib_contains_address_p (so, address)) - return so.so_name.c_str (); + return so.name.c_str (); return nullptr; } +bool +solib_ops::same (const solib &a, const solib &b) const +{ + return (filename_cmp (a.original_name.c_str (), b.original_name.c_str ()) + == 0); +} + /* See solib.h. */ bool solib_keep_data_in_core (CORE_ADDR vaddr, unsigned long size) { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); + const solib_ops *ops = current_program_space->solib_ops (); - if (ops->keep_data_in_core) - return ops->keep_data_in_core (vaddr, size) != 0; - else - return false; + return ops != nullptr && ops->keep_data_in_core (vaddr, size); } /* See solib.h. */ @@ -1290,9 +1289,7 @@ solib_keep_data_in_core (CORE_ADDR vaddr, unsigned long size) void clear_solib (program_space *pspace) { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); - - for (solib &so : pspace->so_list) + for (solib &so : pspace->solibs ()) { bool still_in_use = (so.objfile != nullptr && solib_used (pspace, so)); @@ -1301,9 +1298,10 @@ clear_solib (program_space *pspace) pspace->remove_target_sections (&so); }; - pspace->so_list.clear (); + pspace->solibs ().clear (); - if (ops->clear_solib != nullptr) + if (const solib_ops *ops = pspace->solib_ops (); + ops != nullptr) ops->clear_solib (pspace); } @@ -1315,9 +1313,9 @@ clear_solib (program_space *pspace) void solib_create_inferior_hook (int from_tty) { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); - - ops->solib_create_inferior_hook (from_tty); + if (const solib_ops *ops = current_program_space->solib_ops (); + ops != nullptr) + ops->create_inferior_hook (from_tty); } /* See solib.h. */ @@ -1325,9 +1323,9 @@ solib_create_inferior_hook (int from_tty) bool in_solib_dynsym_resolve_code (CORE_ADDR pc) { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); + const solib_ops *ops = current_program_space->solib_ops (); - return ops->in_dynsym_resolve_code (pc) != 0; + return ops != nullptr && ops->in_dynsym_resolve_code (pc); } /* Implements the "sharedlibrary" command. */ @@ -1369,9 +1367,9 @@ no_shared_libraries_command (const char *ignored, int from_tty) void update_solib_breakpoints (void) { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); + const solib_ops *ops = current_program_space->solib_ops (); - if (ops->update_breakpoints != NULL) + if (ops != nullptr) ops->update_breakpoints (); } @@ -1380,9 +1378,8 @@ update_solib_breakpoints (void) void handle_solib_event (void) { - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); - - if (ops->handle_event != NULL) + if (const solib_ops *ops = current_program_space->solib_ops (); + ops != nullptr) ops->handle_event (); current_inferior ()->pspace->clear_solib_cache (); @@ -1402,7 +1399,7 @@ static void reload_shared_libraries_1 (int from_tty) { if (print_symbol_loading_p (from_tty, 0, 0)) - gdb_printf (_ ("Loading symbols for shared libraries.\n")); + gdb_printf (_("Loading symbols for shared libraries.\n")); for (solib &so : current_program_space->solibs ()) { @@ -1414,8 +1411,9 @@ reload_shared_libraries_1 (int from_tty) add_flags |= SYMFILE_VERBOSE; gdb::unique_xmalloc_ptr<char> filename ( - tilde_expand (so.so_original_name.c_str ())); - gdb_bfd_ref_ptr abfd (solib_bfd_open (filename.get ())); + tilde_expand (so.original_name.c_str ())); + + gdb_bfd_ref_ptr abfd = so.ops ().bfd_open (filename.get ()); if (abfd != NULL) found_pathname = bfd_get_filename (abfd.get ()); @@ -1423,7 +1421,7 @@ reload_shared_libraries_1 (int from_tty) symbol file, close that. */ if ((found_pathname == NULL && was_loaded) || (found_pathname != NULL - && filename_cmp (found_pathname, so.so_name.c_str ()) != 0)) + && filename_cmp (found_pathname, so.name.c_str ()) != 0)) { if (so.objfile && !(so.objfile->flags & OBJF_USERLOADED) && !solib_used (current_program_space, so)) @@ -1436,7 +1434,7 @@ reload_shared_libraries_1 (int from_tty) file, open it. */ if (found_pathname != NULL && (!was_loaded - || filename_cmp (found_pathname, so.so_name.c_str ()) != 0)) + || filename_cmp (found_pathname, so.name.c_str ()) != 0)) { bool got_error = false; @@ -1448,8 +1446,8 @@ reload_shared_libraries_1 (int from_tty) catch (const gdb_exception_error &e) { exception_fprintf (gdb_stderr, e, - _ ("Error while mapping " - "shared library sections:\n")); + _("Error while mapping " + "shared library sections:\n")); got_error = true; } @@ -1466,8 +1464,6 @@ reload_shared_libraries (const char *ignored, int from_tty, { reload_shared_libraries_1 (from_tty); - const solib_ops *ops = gdbarch_so_ops (current_inferior ()->arch ()); - /* Creating inferior hooks here has two purposes. First, if we reload shared libraries then the address of solib breakpoint we've computed previously might be no longer valid. For example, if we forgot to set @@ -1480,8 +1476,9 @@ reload_shared_libraries (const char *ignored, int from_tty, if (target_has_execution ()) { /* Reset or free private data structures not associated with - so_list entries. */ - if (ops->clear_solib != nullptr) + solib entries. */ + if (const solib_ops *ops = current_program_space->solib_ops (); + ops != nullptr) ops->clear_solib (current_program_space); /* Remove any previous solib event breakpoint. This is usually @@ -1530,9 +1527,9 @@ gdb_sysroot_changed (const char *ignored, int from_tty, if (!warning_issued) { - warning (_ ("\"%s\" is deprecated, use \"%s\" instead."), old_prefix, + warning (_("\"%s\" is deprecated, use \"%s\" instead."), old_prefix, new_prefix); - warning (_ ("sysroot set to \"%s\"."), gdb_sysroot.c_str ()); + warning (_("sysroot set to \"%s\"."), gdb_sysroot.c_str ()); warning_issued = true; } @@ -1545,7 +1542,7 @@ static void show_auto_solib_add (struct ui_file *file, int from_tty, struct cmd_list_element *c, const char *value) { - gdb_printf (file, _ ("Autoloading of shared library symbols is %s.\n"), + gdb_printf (file, _("Autoloading of shared library symbols is %s.\n"), value); } @@ -1743,8 +1740,8 @@ gdb_bfd_read_elf_soname (const char *filename) if symbol is not found. */ static CORE_ADDR -bfd_lookup_symbol_from_dyn_symtab ( - bfd *abfd, gdb::function_view<bool (const asymbol *)> match_sym) +bfd_lookup_symbol_from_dyn_symtab + (bfd *abfd, gdb::function_view<bool (const asymbol *)> match_sym) { long storage_needed = bfd_get_dynamic_symtab_upper_bound (abfd); CORE_ADDR symaddr = 0; @@ -1808,56 +1805,42 @@ remove_user_added_objfile (struct objfile *objfile) } } -/* See solist.h. */ - -std::optional<CORE_ADDR> -default_find_solib_addr (solib &so) -{ - return {}; -} +/* Implementation of the linker_namespace convenience variable. -/* Implementation of the current_linker_namespace convenience variable. This returns the GDB internal identifier of the linker namespace, - for the current frame, in the form '[[<number>]]'. If the inferior - doesn't support linker namespaces, this always returns [[0]]. */ + for the selected frame, as an integer. If the inferior doesn't support + linker namespaces, this always returns 0. */ static value * -current_linker_namespace_make_value (gdbarch *gdbarch, internalvar *var, +linker_namespace_make_value (gdbarch *gdbarch, internalvar *var, void *ignore) { - const solib_ops *ops = gdbarch_so_ops (gdbarch); - const language_defn *lang = language_def (get_frame_language - (get_current_frame ())); - std::string nsid = "[[0]]"; - if (ops->find_solib_ns != nullptr) - { - CORE_ADDR curr_pc = get_frame_pc (get_current_frame ()); - for (const solib &so : current_program_space->solibs ()) - if (solib_contains_address_p (so, curr_pc)) - { - nsid = string_printf ("[[%d]]", ops->find_solib_ns (so)); - break; - } - } + int nsid = 0; + CORE_ADDR curr_pc = get_frame_pc (get_selected_frame ()); + for (const solib &so : current_program_space->solibs ()) + if (solib_contains_address_p (so, curr_pc)) + { + if (so.ops ().supports_namespaces ()) + nsid = so.ops ().find_solib_ns (so); + + break; + } /* If the PC is not in an SO, or the solib_ops doesn't support linker namespaces, the inferior is in the default namespace. */ - return lang->value_string (gdbarch, nsid.c_str (), nsid.length ()); + return value_from_longest (builtin_type (gdbarch)->builtin_int, nsid); } -/* Implementation of `$_current_linker_namespace' variable. */ +/* Implementation of `$_linker_namespace' variable. */ -static const struct internalvar_funcs current_linker_namespace_funcs = +static const struct internalvar_funcs linker_namespace_funcs = { - current_linker_namespace_make_value, + linker_namespace_make_value, nullptr, }; -void _initialize_solib (); - -void -_initialize_solib () +INIT_GDB_FILE (solib) { gdb::observers::free_objfile.attach (remove_user_added_objfile, "solib"); gdb::observers::inferior_execd.attach ( @@ -1869,29 +1852,29 @@ _initialize_solib () /* Convenience variables for debugging linker namespaces. These are set here, even if the solib_ops doesn't support them, for consistency. */ - create_internalvar_type_lazy ("_current_linker_namespace", - ¤t_linker_namespace_funcs, nullptr); + create_internalvar_type_lazy ("_linker_namespace", + &linker_namespace_funcs, nullptr); set_internalvar_integer (lookup_internalvar ("_active_linker_namespaces"), 1); add_com ( "sharedlibrary", class_files, sharedlibrary_command, - _ ("Load shared object library symbols for files matching REGEXP.")); + _("Load shared object library symbols for files matching REGEXP.")); cmd_list_element *info_sharedlibrary_cmd = add_info ("sharedlibrary", info_sharedlibrary_command, - _ ("Status of loaded shared object libraries.")); + _("Status of loaded shared object libraries.")); add_info_alias ("dll", info_sharedlibrary_cmd, 1); add_com ("nosharedlibrary", class_files, no_shared_libraries_command, - _ ("Unload all shared object library symbols.")); + _("Unload all shared object library symbols.")); add_info ("linker-namespaces", info_linker_namespace_command, - _ ("Get information about linker namespaces in the inferior.")); + _("Get information about linker namespaces in the inferior.")); add_setshow_boolean_cmd ("auto-solib-add", class_support, &auto_solib_add, - _ ("\ + _("\ Set autoloading of shared library symbols."), - _ ("\ + _("\ Show autoloading of shared library symbols."), - _ ("\ + _("\ If \"on\", symbols from all shared object libraries will be loaded\n\ automatically when the inferior begins execution, when the dynamic linker\n\ informs gdb that a new library has been loaded, or when attaching to the\n\ @@ -1901,11 +1884,11 @@ inferior. Otherwise, symbols must be loaded manually, using \ set_show_commands sysroot_cmds = add_setshow_optional_filename_cmd ("sysroot", class_support, - &gdb_sysroot, _ ("\ + &gdb_sysroot, _("\ Set an alternate system root."), - _ ("\ + _("\ Show the current system root."), - _ ("\ + _("\ The system root is used to load absolute shared library symbol files.\n\ For other (relative) files, you can add directories using\n\ `set solib-search-path'."), @@ -1918,22 +1901,22 @@ For other (relative) files, you can add directories using\n\ &showlist); add_setshow_optional_filename_cmd ("solib-search-path", class_support, - &solib_search_path, _ ("\ + &solib_search_path, _("\ Set the search path for loading non-absolute shared library symbol files."), - _ ("\ + _("\ Show the search path for loading non-absolute shared library symbol files."), - _ ("\ + _("\ This takes precedence over the environment variables \ PATH and LD_LIBRARY_PATH."), reload_shared_libraries, show_solib_search_path, &setlist, &showlist); - add_setshow_boolean_cmd ("solib", class_maintenance, &debug_solib, _ ("\ + add_setshow_boolean_cmd ("solib", class_maintenance, &debug_solib, _("\ Set solib debugging."), - _ ("\ + _("\ Show solib debugging."), - _ ("\ + _("\ When true, solib-related debugging output is enabled."), nullptr, nullptr, &setdebuglist, &showdebuglist); } diff --git a/gdb/solib.h b/gdb/solib.h index 360b6ef..b9465e1 100644 --- a/gdb/solib.h +++ b/gdb/solib.h @@ -20,15 +20,14 @@ #ifndef GDB_SOLIB_H #define GDB_SOLIB_H -/* Forward decl's for prototypes */ -struct solib; -struct target_ops; -struct solib_ops; -struct program_space; - #include "gdb_bfd.h" -#include "symfile-add-flags.h" #include "gdbsupport/function-view.h" +#include "gdbsupport/intrusive_list.h" +#include "gdbsupport/owning_intrusive_list.h" +#include "symfile-add-flags.h" +#include "target-section.h" + +struct program_space; /* Value of the 'set debug solib' configuration variable. */ @@ -42,6 +41,243 @@ extern bool debug_solib; #define SOLIB_SCOPED_DEBUG_START_END(fmt, ...) \ scoped_debug_start_end (debug_solib, "solib", fmt, ##__VA_ARGS__) +#define SO_NAME_MAX_PATH_SIZE 512 /* FIXME: Should be dynamic */ + +/* Base class for target-specific link map information. */ + +struct lm_info +{ + lm_info () = default; + lm_info (const lm_info &) = default; + virtual ~lm_info () = 0; +}; + +using lm_info_up = std::unique_ptr<lm_info>; + +struct solib_ops; + +struct solib : intrusive_list_node<solib> +{ + /* Constructor + + OPS is the solib_ops implementation providing this solib. */ + explicit solib (const solib_ops &ops) : m_ops (&ops) {} + + /* Return the solib_ops implementation providing this solib. */ + const solib_ops &ops () const + { return *m_ops; } + + /* Free symbol-file related contents of SO and reset for possible reloading + of SO. If we have opened a BFD for SO, close it. If we have placed SO's + sections in some target's section table, the caller is responsible for + removing them. + + This function doesn't mess with objfiles at all. If there is an + objfile associated with SO that needs to be removed, the caller is + responsible for taking care of that. */ + void clear () ; + + /* The following fields of the structure come directly from the + dynamic linker's tables in the inferior, and are initialized by + current_sos. */ + + /* A pointer to target specific link map information. Often this + will be a copy of struct link_map from the user process, but + it need not be; it can be any collection of data needed to + traverse the dynamic linker's data structures. */ + lm_info_up lm_info; + + /* Shared object file name, exactly as it appears in the + inferior's link map. This may be a relative path, or something + which needs to be looked up in LD_LIBRARY_PATH, etc. We use it + to tell which entries in the inferior's dynamic linker's link + map we've already loaded. */ + std::string original_name; + + /* Shared object file name, expanded to something GDB can open. */ + std::string name; + + /* The following fields of the structure are built from + information gathered from the shared object file itself, and + are set when we actually add it to our symbol tables. + + current_sos must initialize these fields to 0. */ + + gdb_bfd_ref_ptr abfd; + + /* True if symbols have been read in. */ + bool symbols_loaded = false; + + /* objfile with symbols for a loaded library. Target memory is read from + ABFD. OBJFILE may be NULL either before symbols have been loaded, if + the file cannot be found or after the command "nosharedlibrary". */ + struct objfile *objfile = nullptr; + + std::vector<target_section> sections; + + /* Record the range of addresses belonging to this shared library. + There may not be just one (e.g. if two segments are relocated + differently). This is used for "info sharedlibrary" and + the MI command "-file-list-shared-libraries". The latter has a format + that supports outputting multiple segments once the related code + supports them. */ + CORE_ADDR addr_low = 0, addr_high = 0; + +private: + /* The solib_ops responsible for this solib. */ + const solib_ops *m_ops; +}; + +/* A unique pointer to an solib. */ +using solib_up = std::unique_ptr<solib>; + +struct solib_ops +{ + virtual ~solib_ops () = default; + + /* Adjust the section binding addresses by the base address at + which the object was actually mapped. */ + virtual void relocate_section_addresses (solib &so, target_section *) const + = 0; + + /* Reset private data structures associated with SO. + This is called when SO is about to be reloaded. + It is also called when SO is about to be freed. + + Defaults to no-op. */ + virtual void clear_so (const solib &so) const {} + + /* Free private data structures associated to PSPACE. This method + should not free resources associated to individual solib entries, + those are cleared by the clear_so method. + + Defaults to no-op. */ + virtual void clear_solib (program_space *pspace) const {} + + /* Target dependent code to run after child process fork. + + Defaults to no-op. */ + virtual void create_inferior_hook (int from_tty) const {}; + + /* Construct a list of the currently loaded shared objects. This + list does not include an entry for the main executable file. + + Note that we only gather information directly available from the + inferior --- we don't examine any of the shared library files + themselves. The declaration of `struct solib' says which fields + we provide values for. */ + virtual owning_intrusive_list<solib> current_sos () const = 0; + + /* Find, open, and read the symbols for the main executable. If + FROM_TTY is non-zero, allow messages to be printed. + + Return true if this was done successfully. Defaults to false. */ + virtual bool open_symbol_file_object (int from_tty) const { return false; } + + /* Determine if PC lies in the dynamic symbol resolution code of + the run time loader. + + Defaults to false. */ + virtual bool in_dynsym_resolve_code (CORE_ADDR pc) const + { return false; }; + + /* Find and open shared library binary file. */ + virtual gdb_bfd_ref_ptr bfd_open (const char *pathname) const; + + /* Given two solib objects, GDB from the GDB thread list and INFERIOR from the + list returned by current_sos, return true if they represent the same library. + + Defaults to comparing the solib original names using filename_cmp. */ + virtual bool same (const solib &gdb, const solib &inferior) const; + + /* Return whether a region of memory must be kept in a core file + for shared libraries loaded before "gcore" is used to be + handled correctly when the core file is loaded. This only + applies when the section would otherwise not be kept in the + core file (in particular, for readonly sections). + + Defaults to false. */ + virtual bool keep_data_in_core (CORE_ADDR vaddr, unsigned long size) const + { return false; }; + + /* Enable or disable optional solib event breakpoints as appropriate. This + should be called whenever stop_on_solib_events is changed. + + Defaults to no-op. */ + virtual void update_breakpoints () const {}; + + /* Target-specific processing of solib events that will be performed before + solib_add is called. + + Defaults to no-op. */ + virtual void handle_event () const {}; + + /* Return an address within the inferior's address space which is known + to be part of SO. If there is no such address, or GDB doesn't know + how to figure out such an address then an empty optional is + returned. + + The returned address can be used when loading the shared libraries + for a core file. GDB knows the build-ids for (some) files mapped + into the inferior's address space, and knows the address ranges which + those mapped files cover. If GDB can figure out a representative + address for the library then this can be used to match a library to a + mapped file, and thus to a build-id. GDB can then use this + information to help locate the shared library objfile, if the objfile + is not in the expected place (as defined by the shared libraries file + name). + + The default implementation of returns an empty option, indicating GDB is + unable to find an address within the library SO. */ + virtual std::optional<CORE_ADDR> find_solib_addr (solib &so) const + { return {}; }; + + /* Return true if the linker or libc supports linkage namespaces. + + Defaults to false. */ + virtual bool supports_namespaces () const { return false; } + + /* Return which linker namespace contains SO. + + The supports_namespaces method must return true for this to be + called. + + Throw an error if the namespace can not be determined (such as when we're + stepping though the dynamic linker). */ + virtual int find_solib_ns (const solib &so) const + { gdb_assert_not_reached ("namespaces not supported"); } + + /* Returns the number of active namespaces in the inferior. + + The supports_namespaces method must return true for this to be called. */ + virtual int num_active_namespaces () const + { gdb_assert_not_reached ("namespaces not supported"); } + + /* Returns all solibs for a given namespace. If the namespace is not + active, returns an empty vector. + + The supports_namespaces method must return true for this to be called. */ + virtual std::vector<const solib *> get_solibs_in_ns (int ns) const + { gdb_assert_not_reached ("namespaces not supported"); } +}; + +/* A unique pointer to an solib_ops. */ +using solib_ops_up = std::unique_ptr<solib_ops>; + +/* Find main executable binary file. */ +extern gdb::unique_xmalloc_ptr<char> exec_file_find (const char *in_pathname, + int *fd); + +/* Find shared library binary file. */ +extern gdb::unique_xmalloc_ptr<char> solib_find (const char *in_pathname, + int *fd); + +/* Open BFD for shared library file. */ +extern gdb_bfd_ref_ptr solib_bfd_fopen (const char *pathname, int fd); + +/* Find solib binary file and open it. */ +extern gdb_bfd_ref_ptr solib_bfd_open (const char *in_pathname); + /* Called when we free all symtabs of PSPACE, to free the shared library information as well. */ @@ -89,7 +325,8 @@ extern void no_shared_libraries (program_space *pspace); Extract the list of currently loaded shared objects from the inferior, and compare it with the list of shared objects in the current program space's list of shared libraries. Edit - so_list_head to bring it in sync with the inferior's new list. + the current program space's solib list to bring it in sync with the + inferior's new list. If we notice that the inferior has unloaded some shared objects, free any symbolic info GDB had read about those shared objects. diff --git a/gdb/solist.h b/gdb/solist.h deleted file mode 100644 index 6ab5a06..0000000 --- a/gdb/solist.h +++ /dev/null @@ -1,225 +0,0 @@ -/* Shared library declarations for GDB, the GNU Debugger. - Copyright (C) 1990-2025 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. */ - -#ifndef GDB_SOLIST_H -#define GDB_SOLIST_H - -#define SO_NAME_MAX_PATH_SIZE 512 /* FIXME: Should be dynamic */ - -/* For domain_enum domain. */ -#include "symtab.h" -#include "gdb_bfd.h" -#include "gdbsupport/owning_intrusive_list.h" -#include "target-section.h" - -/* Base class for target-specific link map information. */ - -struct lm_info -{ - lm_info () = default; - lm_info (const lm_info &) = default; - virtual ~lm_info () = 0; -}; - -using lm_info_up = std::unique_ptr<lm_info>; - -struct solib : intrusive_list_node<solib> -{ - /* Free symbol-file related contents of SO and reset for possible reloading - of SO. If we have opened a BFD for SO, close it. If we have placed SO's - sections in some target's section table, the caller is responsible for - removing them. - - This function doesn't mess with objfiles at all. If there is an - objfile associated with SO that needs to be removed, the caller is - responsible for taking care of that. */ - void clear () ; - - /* The following fields of the structure come directly from the - dynamic linker's tables in the inferior, and are initialized by - current_sos. */ - - /* A pointer to target specific link map information. Often this - will be a copy of struct link_map from the user process, but - it need not be; it can be any collection of data needed to - traverse the dynamic linker's data structures. */ - lm_info_up lm_info; - - /* Shared object file name, exactly as it appears in the - inferior's link map. This may be a relative path, or something - which needs to be looked up in LD_LIBRARY_PATH, etc. We use it - to tell which entries in the inferior's dynamic linker's link - map we've already loaded. */ - std::string so_original_name; - - /* Shared object file name, expanded to something GDB can open. */ - std::string so_name; - - /* The following fields of the structure are built from - information gathered from the shared object file itself, and - are set when we actually add it to our symbol tables. - - current_sos must initialize these fields to 0. */ - - gdb_bfd_ref_ptr abfd; - - /* True if symbols have been read in. */ - bool symbols_loaded = false; - - /* objfile with symbols for a loaded library. Target memory is read from - ABFD. OBJFILE may be NULL either before symbols have been loaded, if - the file cannot be found or after the command "nosharedlibrary". */ - struct objfile *objfile = nullptr; - - std::vector<target_section> sections; - - /* Record the range of addresses belonging to this shared library. - There may not be just one (e.g. if two segments are relocated - differently). This is used for "info sharedlibrary" and - the MI command "-file-list-shared-libraries". The latter has a format - that supports outputting multiple segments once the related code - supports them. */ - CORE_ADDR addr_low = 0, addr_high = 0; -}; - -struct solib_ops -{ - /* Adjust the section binding addresses by the base address at - which the object was actually mapped. */ - void (*relocate_section_addresses) (solib &so, target_section *); - - /* Reset private data structures associated with SO. - This is called when SO is about to be reloaded. - It is also called when SO is about to be freed. */ - void (*clear_so) (const solib &so); - - /* Free private data structures associated to PSPACE. This method - should not free resources associated to individual so_list entries, - those are cleared by the clear_so method. */ - void (*clear_solib) (program_space *pspace); - - /* Target dependent code to run after child process fork. */ - void (*solib_create_inferior_hook) (int from_tty); - - /* Construct a list of the currently loaded shared objects. This - list does not include an entry for the main executable file. - - Note that we only gather information directly available from the - inferior --- we don't examine any of the shared library files - themselves. The declaration of `struct solib' says which fields - we provide values for. */ - owning_intrusive_list<solib> (*current_sos) (); - - /* Find, open, and read the symbols for the main executable. If - FROM_TTY is non-zero, allow messages to be printed. */ - int (*open_symbol_file_object) (int from_ttyp); - - /* Determine if PC lies in the dynamic symbol resolution code of - the run time loader. */ - int (*in_dynsym_resolve_code) (CORE_ADDR pc); - - /* Find and open shared library binary file. */ - gdb_bfd_ref_ptr (*bfd_open) (const char *pathname); - - /* Given two so_list objects, one from the GDB thread list - and another from the list returned by current_sos, return 1 - if they represent the same library. - Falls back to using strcmp on so_original_name field when set - to NULL. */ - int (*same) (const solib &gdb, const solib &inferior); - - /* Return whether a region of memory must be kept in a core file - for shared libraries loaded before "gcore" is used to be - handled correctly when the core file is loaded. This only - applies when the section would otherwise not be kept in the - core file (in particular, for readonly sections). */ - int (*keep_data_in_core) (CORE_ADDR vaddr, - unsigned long size); - - /* Enable or disable optional solib event breakpoints as - appropriate. This should be called whenever - stop_on_solib_events is changed. This pointer can be - NULL, in which case no enabling or disabling is necessary - for this target. */ - void (*update_breakpoints) (void); - - /* Target-specific processing of solib events that will be - performed before solib_add is called. This pointer can be - NULL, in which case no specific preprocessing is necessary - for this target. */ - void (*handle_event) (void); - - /* Return an address within the inferior's address space which is known - to be part of SO. If there is no such address, or GDB doesn't know - how to figure out such an address then an empty optional is - returned. - - The returned address can be used when loading the shared libraries - for a core file. GDB knows the build-ids for (some) files mapped - into the inferior's address space, and knows the address ranges which - those mapped files cover. If GDB can figure out a representative - address for the library then this can be used to match a library to a - mapped file, and thus to a build-id. GDB can then use this - information to help locate the shared library objfile, if the objfile - is not in the expected place (as defined by the shared libraries file - name). */ - - std::optional<CORE_ADDR> (*find_solib_addr) (solib &so); - - /* Return which linker namespace contains the current so. - If the linker or libc does not support linkage namespaces at all - (which is basically all of them but solib-svr4), this function should - be set to nullptr, so that "info shared" won't add an unnecessary - column. - - If the namespace can not be determined (such as when we're stepping - though the dynamic linker), this function should throw a - gdb_exception_error. */ - int (*find_solib_ns) (const solib &so); - - /* Returns the number of active namespaces in the inferior. */ - int (*num_active_namespaces) (); - - /* Returns all solibs for a given namespace. If the namespace is not - active, returns an empty vector. */ - std::vector<const solib *> (*get_solibs_in_ns) (int ns); -}; - -/* A unique pointer to a so_list. */ -using solib_up = std::unique_ptr<solib>; - -/* Find main executable binary file. */ -extern gdb::unique_xmalloc_ptr<char> exec_file_find (const char *in_pathname, - int *fd); - -/* Find shared library binary file. */ -extern gdb::unique_xmalloc_ptr<char> solib_find (const char *in_pathname, - int *fd); - -/* Open BFD for shared library file. */ -extern gdb_bfd_ref_ptr solib_bfd_fopen (const char *pathname, int fd); - -/* Find solib binary file and open it. */ -extern gdb_bfd_ref_ptr solib_bfd_open (const char *in_pathname); - -/* A default implementation of the solib_ops::find_solib_addr callback. - This just returns an empty std::optional<CORE_ADDR> indicating GDB is - unable to find an address within the library SO. */ -extern std::optional<CORE_ADDR> default_find_solib_addr (solib &so); - -#endif /* GDB_SOLIST_H */ diff --git a/gdb/source-cache.c b/gdb/source-cache.c index ebe451d..9d5151a 100644 --- a/gdb/source-cache.c +++ b/gdb/source-cache.c @@ -511,9 +511,7 @@ static void extract_lines_test () } #endif -void _initialize_source_cache (); -void -_initialize_source_cache () +INIT_GDB_FILE (source_cache) { add_cmd ("source-cache", class_maintenance, source_cache_flush_command, _("Force gdb to flush its source code cache."), diff --git a/gdb/source.c b/gdb/source.c index 13cb8d6..8cb5c36 100644 --- a/gdb/source.c +++ b/gdb/source.c @@ -1312,14 +1312,12 @@ print_source_lines_base (struct symtab *s, int line, int stopline, int nlines = stopline - line; struct ui_out *uiout = current_uiout; - /* Regardless of whether we can open the file, set current_source_symtab. */ + /* Regardless of whether we can open the file, we'll want to set + current_source_symtab, but not if throw an error, or return without + printing any source lines. */ current_source_location *loc = get_source_location (current_program_space); - loc->set (s, line); - first_line_listed = line; - last_line_listed = line; - /* If printing of source lines is disabled, just print file and line number. */ if (uiout->test_flags (ui_source_list) && source_open) @@ -1380,6 +1378,10 @@ print_source_lines_base (struct symtab *s, int line, int stopline, uiout->text ("\n"); } + loc->set (s, line); + first_line_listed = line; + last_line_listed = line; + return; } @@ -1399,12 +1401,9 @@ print_source_lines_base (struct symtab *s, int line, int stopline, } const char *iter = lines.c_str (); - int new_lineno = loc->line (); - while (nlines-- > 0 && *iter != '\0') + int new_lineno = line; + for (; nlines-- > 0 && *iter != '\0'; ++new_lineno) { - char buf[20]; - - last_line_listed = loc->line (); if (flags & PRINT_SOURCE_LINES_FILENAME) { uiout->message ("%ps", @@ -1415,7 +1414,6 @@ print_source_lines_base (struct symtab *s, int line, int stopline, uiout->message ("%ps\t", styled_string (line_number_style.style (), pulongest (new_lineno))); - ++new_lineno; while (*iter != '\0') { @@ -1457,6 +1455,8 @@ print_source_lines_base (struct symtab *s, int line, int stopline, } else if (*iter > 0 && *iter < 040) { + char buf[20]; + xsnprintf (buf, sizeof (buf), "^%c", *iter + 0100); uiout->text (buf); ++iter; @@ -1470,7 +1470,11 @@ print_source_lines_base (struct symtab *s, int line, int stopline, uiout->text ("\n"); } - loc->set (loc->symtab (), new_lineno); + /* As NEW_LINENO was incremented after displaying the last source line, + the last line shown was the one before NEW_LINENO. */ + first_line_listed = line; + last_line_listed = new_lineno - 1; + loc->set (s, new_lineno); } @@ -1910,9 +1914,7 @@ source_lines_range::source_lines_range (int startline, } -void _initialize_source (); -void -_initialize_source () +INIT_GDB_FILE (source) { init_source_path (); diff --git a/gdb/sparc-linux-nat.c b/gdb/sparc-linux-nat.c index 8dccce9..18db599 100644 --- a/gdb/sparc-linux-nat.c +++ b/gdb/sparc-linux-nat.c @@ -65,9 +65,7 @@ fill_fpregset (const struct regcache *regcache, sparc32_collect_fpregset (sparc_fpregmap, regcache, regnum, fpregs); } -void _initialize_sparc_linux_nat (); -void -_initialize_sparc_linux_nat () +INIT_GDB_FILE (sparc_linux_nat) { sparc_fpregmap = &sparc32_bsd_fpregmap; diff --git a/gdb/sparc-linux-tdep.c b/gdb/sparc-linux-tdep.c index 27706b7..6e23fdd 100644 --- a/gdb/sparc-linux-tdep.c +++ b/gdb/sparc-linux-tdep.c @@ -33,6 +33,7 @@ #include "tramp-frame.h" #include "xml-syscall.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" /* The syscall's XML filename for sparc 32-bit. */ #define XML_SYSCALL_FILENAME_SPARC32 "syscalls/sparc-linux.xml" @@ -436,8 +437,7 @@ sparc32_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* GNU/Linux has SVR4-style shared libraries... */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); /* ...which means that we need some special handling when doing prologue analysis. */ @@ -466,9 +466,7 @@ sparc32_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) sparc32_linux_gdb_signal_to_target); } -void _initialize_sparc_linux_tdep (); -void -_initialize_sparc_linux_tdep () +INIT_GDB_FILE (sparc_linux_tdep) { gdbarch_register_osabi (bfd_arch_sparc, 0, GDB_OSABI_LINUX, sparc32_linux_init_abi); diff --git a/gdb/sparc-nat.c b/gdb/sparc-nat.c index c2d3833..1219612 100644 --- a/gdb/sparc-nat.c +++ b/gdb/sparc-nat.c @@ -309,9 +309,7 @@ sparc_xfer_wcookie (enum target_object object, } -void _initialize_sparc_nat (); -void -_initialize_sparc_nat () +INIT_GDB_FILE (sparc_nat) { /* Default to using SunOS 4 register sets. */ if (sparc_gregmap == NULL) diff --git a/gdb/sparc-netbsd-nat.c b/gdb/sparc-netbsd-nat.c index 8eee741..54cba0b 100644 --- a/gdb/sparc-netbsd-nat.c +++ b/gdb/sparc-netbsd-nat.c @@ -56,9 +56,7 @@ sparc32nbsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) static sparc_target<inf_ptrace_target> the_sparc_nbsd_nat_target; -void _initialize_sparcnbsd_nat (); -void -_initialize_sparcnbsd_nat () +INIT_GDB_FILE (sparcnbsd_nat) { sparc_gregmap = &sparc32nbsd_gregmap; sparc_fpregmap = &sparc32_bsd_fpregmap; diff --git a/gdb/sparc-netbsd-tdep.c b/gdb/sparc-netbsd-tdep.c index 84e3a97..8e8a1ba 100644 --- a/gdb/sparc-netbsd-tdep.c +++ b/gdb/sparc-netbsd-tdep.c @@ -313,13 +313,10 @@ sparc32nbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) frame_unwind_append_unwinder (gdbarch, &sparc32nbsd_sigcontext_frame_unwind); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); } -void _initialize_sparcnbsd_tdep (); -void -_initialize_sparcnbsd_tdep () +INIT_GDB_FILE (sparcnbsd_tdep) { gdbarch_register_osabi (bfd_arch_sparc, 0, GDB_OSABI_NETBSD, sparc32nbsd_init_abi); diff --git a/gdb/sparc-obsd-tdep.c b/gdb/sparc-obsd-tdep.c index 3486799..ff6e915 100644 --- a/gdb/sparc-obsd-tdep.c +++ b/gdb/sparc-obsd-tdep.c @@ -254,9 +254,7 @@ sparc32obsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) bsd_uthread_set_collect_uthread (gdbarch, sparc32obsd_collect_uthread); } -void _initialize_sparc32obsd_tdep (); -void -_initialize_sparc32obsd_tdep () +INIT_GDB_FILE (sparc32obsd_tdep) { gdbarch_register_osabi (bfd_arch_sparc, 0, GDB_OSABI_OPENBSD, sparc32obsd_init_abi); diff --git a/gdb/sparc-sol2-tdep.c b/gdb/sparc-sol2-tdep.c index 5c6085a..8de7439 100644 --- a/gdb/sparc-sol2-tdep.c +++ b/gdb/sparc-sol2-tdep.c @@ -207,22 +207,19 @@ sparc32_sol2_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Solaris has SVR4-style shared libraries... */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); /* ...which means that we need some special handling when doing prologue analysis. */ tdep->plt_entry_size = 12; /* Solaris has kernel-assisted single-stepping support. */ - set_gdbarch_software_single_step (gdbarch, NULL); + set_gdbarch_get_next_pcs (gdbarch, NULL); frame_unwind_append_unwinder (gdbarch, &sparc32_sol2_sigtramp_frame_unwind); } -void _initialize_sparc_sol2_tdep (); -void -_initialize_sparc_sol2_tdep () +INIT_GDB_FILE (sparc_sol2_tdep) { gdbarch_register_osabi (bfd_arch_sparc, 0, GDB_OSABI_SOLARIS, sparc32_sol2_init_abi); diff --git a/gdb/sparc-tdep.c b/gdb/sparc-tdep.c index 80914d9..914a568 100644 --- a/gdb/sparc-tdep.c +++ b/gdb/sparc-tdep.c @@ -1874,7 +1874,7 @@ sparc32_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_frame_args_skip (gdbarch, 8); - set_gdbarch_software_single_step (gdbarch, sparc_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, sparc_software_single_step); set_gdbarch_write_pc (gdbarch, sparc_write_pc); set_gdbarch_dummy_id (gdbarch, sparc_dummy_id); @@ -2264,9 +2264,7 @@ const struct sparc_fpregmap sparc32_bsd_fpregmap = 32 * 4, /* %fsr */ }; -void _initialize_sparc_tdep (); -void -_initialize_sparc_tdep () +INIT_GDB_FILE (sparc_tdep) { gdbarch_register (bfd_arch_sparc, sparc32_gdbarch_init); } diff --git a/gdb/sparc64-fbsd-nat.c b/gdb/sparc64-fbsd-nat.c index 4848c77..d697841 100644 --- a/gdb/sparc64-fbsd-nat.c +++ b/gdb/sparc64-fbsd-nat.c @@ -61,9 +61,7 @@ sparc64fbsd_kvm_supply_pcb (struct regcache *regcache, struct pcb *pcb) /* Add some extra features to the generic SPARC target. */ static sparc_target<fbsd_nat_target> the_sparc64_fbsd_nat_target; -void _initialize_sparc64fbsd_nat (); -void -_initialize_sparc64fbsd_nat () +INIT_GDB_FILE (sparc64fbsd_nat) { add_inf_child_target (&the_sparc64_fbsd_nat_target); diff --git a/gdb/sparc64-fbsd-tdep.c b/gdb/sparc64-fbsd-tdep.c index 738c3d1..ba04a71 100644 --- a/gdb/sparc64-fbsd-tdep.c +++ b/gdb/sparc64-fbsd-tdep.c @@ -238,13 +238,10 @@ sparc64fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* FreeBSD/sparc64 has SVR4-style shared libraries. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); } -void _initialize_sparc64fbsd_tdep (); -void -_initialize_sparc64fbsd_tdep () +INIT_GDB_FILE (sparc64fbsd_tdep) { gdbarch_register_osabi (bfd_arch_sparc, bfd_mach_sparc_v9, GDB_OSABI_FREEBSD, sparc64fbsd_init_abi); diff --git a/gdb/sparc64-linux-nat.c b/gdb/sparc64-linux-nat.c index 9a4b228..2884faa 100644 --- a/gdb/sparc64-linux-nat.c +++ b/gdb/sparc64-linux-nat.c @@ -87,9 +87,7 @@ fill_fpregset (const struct regcache *regcache, sparc64_collect_fpregset (&sparc64_bsd_fpregmap, regcache, regnum, fpregs); } -void _initialize_sparc64_linux_nat (); -void -_initialize_sparc64_linux_nat () +INIT_GDB_FILE (sparc64_linux_nat) { sparc_fpregmap = &sparc64_bsd_fpregmap; diff --git a/gdb/sparc64-linux-tdep.c b/gdb/sparc64-linux-tdep.c index 6e7281c..373dfb6 100644 --- a/gdb/sparc64-linux-tdep.c +++ b/gdb/sparc64-linux-tdep.c @@ -32,6 +32,7 @@ #include "tramp-frame.h" #include "xml-syscall.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" /* ADI specific si_code */ #ifndef SEGV_ACCADI @@ -383,8 +384,7 @@ sparc64_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* GNU/Linux has SVR4-style shared libraries... */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_lp64_svr4_solib_ops); /* ...which means that we need some special handling when doing prologue analysis. */ @@ -409,9 +409,7 @@ sparc64_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_report_signal_info (gdbarch, sparc64_linux_report_signal_info); } -void _initialize_sparc64_linux_tdep (); -void -_initialize_sparc64_linux_tdep () +INIT_GDB_FILE (sparc64_linux_tdep) { gdbarch_register_osabi (bfd_arch_sparc, bfd_mach_sparc_v9, GDB_OSABI_LINUX, sparc64_linux_init_abi); diff --git a/gdb/sparc64-nat.c b/gdb/sparc64-nat.c index 6bb37d8..66451a0 100644 --- a/gdb/sparc64-nat.c +++ b/gdb/sparc64-nat.c @@ -68,9 +68,7 @@ sparc64_fpregset_supplies_p (struct gdbarch *gdbarch, int regnum) return 0; } -void _initialize_sparc64_nat (); -void -_initialize_sparc64_nat () +INIT_GDB_FILE (sparc64_nat) { sparc_supply_gregset = sparc64_supply_gregset; sparc_collect_gregset = sparc64_collect_gregset; diff --git a/gdb/sparc64-netbsd-nat.c b/gdb/sparc64-netbsd-nat.c index c4bec4c..1036160 100644 --- a/gdb/sparc64-netbsd-nat.c +++ b/gdb/sparc64-netbsd-nat.c @@ -169,9 +169,7 @@ sparc64nbsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) /* We've got nothing to add to the generic SPARC target. */ static sparc_target<inf_ptrace_target> the_sparc64_nbsd_nat_target; -void _initialize_sparc64nbsd_nat (); -void -_initialize_sparc64nbsd_nat () +INIT_GDB_FILE (sparc64nbsd_nat) { sparc_supply_gregset = sparc64nbsd_supply_gregset; sparc_collect_gregset = sparc64nbsd_collect_gregset; diff --git a/gdb/sparc64-netbsd-tdep.c b/gdb/sparc64-netbsd-tdep.c index 1919598..0227ec4 100644 --- a/gdb/sparc64-netbsd-tdep.c +++ b/gdb/sparc64-netbsd-tdep.c @@ -266,13 +266,10 @@ sparc64nbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* NetBSD/sparc64 has SVR4-style shared libraries. */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); } -void _initialize_sparc64nbsd_tdep (); -void -_initialize_sparc64nbsd_tdep () +INIT_GDB_FILE (sparc64nbsd_tdep) { gdbarch_register_osabi (bfd_arch_sparc, bfd_mach_sparc_v9, GDB_OSABI_NETBSD, sparc64nbsd_init_abi); diff --git a/gdb/sparc64-obsd-nat.c b/gdb/sparc64-obsd-nat.c index 5f9bd46..60dd188 100644 --- a/gdb/sparc64-obsd-nat.c +++ b/gdb/sparc64-obsd-nat.c @@ -108,9 +108,7 @@ sparc64obsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) /* Add some extra features to the generic SPARC target. */ static sparc_target<obsd_nat_target> the_sparc64_obsd_nat_target; -void _initialize_sparc64obsd_nat (); -void -_initialize_sparc64obsd_nat () +INIT_GDB_FILE (sparc64obsd_nat) { sparc_supply_gregset = sparc64_supply_gregset; sparc_collect_gregset = sparc64_collect_gregset; diff --git a/gdb/sparc64-obsd-tdep.c b/gdb/sparc64-obsd-tdep.c index 657f548..83cc9c0 100644 --- a/gdb/sparc64-obsd-tdep.c +++ b/gdb/sparc64-obsd-tdep.c @@ -440,8 +440,7 @@ sparc64obsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) obsd_init_abi (info, gdbarch); /* OpenBSD/sparc64 has SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); set_gdbarch_skip_solib_resolver (gdbarch, obsd_skip_solib_resolver); /* OpenBSD provides a user-level threads implementation. */ @@ -449,9 +448,7 @@ sparc64obsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) bsd_uthread_set_collect_uthread (gdbarch, sparc64obsd_collect_uthread); } -void _initialize_sparc64obsd_tdep (); -void -_initialize_sparc64obsd_tdep () +INIT_GDB_FILE (sparc64obsd_tdep) { gdbarch_register_osabi (bfd_arch_sparc, bfd_mach_sparc_v9, GDB_OSABI_OPENBSD, sparc64obsd_init_abi); diff --git a/gdb/sparc64-sol2-tdep.c b/gdb/sparc64-sol2-tdep.c index 72a07ec..cb3ba6b 100644 --- a/gdb/sparc64-sol2-tdep.c +++ b/gdb/sparc64-sol2-tdep.c @@ -214,20 +214,17 @@ sparc64_sol2_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* Solaris has SVR4-style shared libraries... */ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_lp64_solib_ops); /* ...which means that we need some special handling when doing prologue analysis. */ tdep->plt_entry_size = 16; /* Solaris has kernel-assisted single-stepping support. */ - set_gdbarch_software_single_step (gdbarch, NULL); + set_gdbarch_get_next_pcs (gdbarch, NULL); } -void _initialize_sparc64_sol2_tdep (); -void -_initialize_sparc64_sol2_tdep () +INIT_GDB_FILE (sparc64_sol2_tdep) { gdbarch_register_osabi (bfd_arch_sparc, bfd_mach_sparc_v9, GDB_OSABI_SOLARIS, sparc64_sol2_init_abi); diff --git a/gdb/sparc64-tdep.c b/gdb/sparc64-tdep.c index ee7d7ed..6846421 100644 --- a/gdb/sparc64-tdep.c +++ b/gdb/sparc64-tdep.c @@ -529,9 +529,7 @@ adi_assign_command (const char *args, int from_tty) do_assign (next_address, cnt, version); } -void _initialize_sparc64_adi_tdep (); -void -_initialize_sparc64_adi_tdep () +INIT_GDB_FILE (sparc64_adi_tdep) { add_basic_prefix_cmd ("adi", class_support, _("ADI version related commands."), diff --git a/gdb/stabsread.c b/gdb/stabsread.c index 409f303..2d1411e 100644 --- a/gdb/stabsread.c +++ b/gdb/stabsread.c @@ -472,7 +472,7 @@ patch_block_stabs (struct pending *symbols, struct pending_stabs *stabs, a N_GSYM stab for it, but no regular (C_EXT) symbol. */ sym = new (&objfile->objfile_obstack) symbol; sym->set_domain (VAR_DOMAIN); - sym->set_aclass_index (LOC_OPTIMIZED_OUT); + sym->set_loc_class_index (LOC_OPTIMIZED_OUT); sym->set_linkage_name (obstack_strndup (&objfile->objfile_obstack, name, pp - name)); pp += 2; @@ -3123,7 +3123,7 @@ static const struct symbol_register_ops stab_register_funcs = { stab_reg_to_regnum }; -/* The "aclass" indices for computed symbols. */ +/* The "loc_class" indices for computed symbols. */ static int stab_register_index; static int stab_regparm_index; @@ -3268,7 +3268,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, (where type 6 is defined by "blobs:t6=eblob1:0,blob2:1,;"). */ if (*p != '=') { - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); sym->set_type (error_type (&p, objfile)); sym->set_domain (VAR_DOMAIN); add_symbol_to_list (sym, get_file_symbols ()); @@ -3291,7 +3291,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, sym->set_type (dbl_type); sym->set_value_bytes (dbl_valu); - sym->set_aclass_index (LOC_CONST_BYTES); + sym->set_loc_class_index (LOC_CONST_BYTES); } break; case 'i': @@ -3305,7 +3305,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, sym->set_type (builtin_type (objfile)->builtin_long); sym->set_value_longest (atoi (p)); - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); } break; @@ -3313,7 +3313,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, { sym->set_type (builtin_type (objfile)->builtin_char); sym->set_value_longest (atoi (p)); - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); } break; @@ -3327,7 +3327,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, if (quote != '\'' && quote != '"') { - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); sym->set_type (error_type (&p, objfile)); sym->set_domain (VAR_DOMAIN); add_symbol_to_list (sym, get_file_symbols ()); @@ -3352,7 +3352,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, } if (*p != quote) { - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); sym->set_type (error_type (&p, objfile)); sym->set_domain (VAR_DOMAIN); add_symbol_to_list (sym, get_file_symbols ()); @@ -3375,7 +3375,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, p++; sym->set_value_bytes (string_value); - sym->set_aclass_index (LOC_CONST_BYTES); + sym->set_loc_class_index (LOC_CONST_BYTES); } break; @@ -3385,7 +3385,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, e.g. "b:c=e6,0" for "const b = blob1" (where type 6 is defined by "blobs:t6=eblob1:0,blob2:1,;"). */ { - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); sym->set_type (read_type (&p, objfile)); if (*p != ',') @@ -3406,7 +3406,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, break; default: { - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); sym->set_type (error_type (&p, objfile)); } } @@ -3417,7 +3417,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 'C': /* The name of a caught exception. */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_LABEL); + sym->set_loc_class_index (LOC_LABEL); sym->set_domain (VAR_DOMAIN); sym->set_value_address (valu); add_symbol_to_list (sym, get_local_symbols ()); @@ -3426,7 +3426,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 'f': /* A static function definition. */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_BLOCK); + sym->set_loc_class_index (LOC_BLOCK); sym->set_domain (FUNCTION_DOMAIN); add_symbol_to_list (sym, get_file_symbols ()); /* fall into process_function_types. */ @@ -3497,7 +3497,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 'F': /* A global function definition. */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_BLOCK); + sym->set_loc_class_index (LOC_BLOCK); sym->set_domain (FUNCTION_DOMAIN); add_symbol_to_list (sym, get_global_symbols ()); goto process_function_types; @@ -3508,7 +3508,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, corresponding linker definition to find the value. These definitions appear at the end of the namelist. */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); sym->set_domain (VAR_DOMAIN); /* Don't add symbol references to global_sym_chain. Symbol references don't have valid names and won't match up with @@ -3529,7 +3529,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 's': case 'l': sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_LOCAL); + sym->set_loc_class_index (LOC_LOCAL); sym->set_value_longest (valu); sym->set_domain (VAR_DOMAIN); add_symbol_to_list (sym, get_local_symbols ()); @@ -3549,7 +3549,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, else sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_ARG); + sym->set_loc_class_index (LOC_ARG); sym->set_value_longest (valu); sym->set_domain (VAR_DOMAIN); sym->set_is_argument (1); @@ -3598,7 +3598,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 'R': /* Parameter which is in a register. */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (stab_register_index); + sym->set_loc_class_index (stab_register_index); sym->set_is_argument (1); sym->set_value_longest (valu); sym->set_domain (VAR_DOMAIN); @@ -3608,7 +3608,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 'r': /* Register variable (either global or local). */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (stab_register_index); + sym->set_loc_class_index (stab_register_index); sym->set_value_longest (valu); sym->set_domain (VAR_DOMAIN); if (within_function) @@ -3640,12 +3640,12 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, struct symbol *prev_sym; prev_sym = local_symbols->symbol[local_symbols->nsyms - 1]; - if ((prev_sym->aclass () == LOC_REF_ARG - || prev_sym->aclass () == LOC_ARG) + if ((prev_sym->loc_class () == LOC_REF_ARG + || prev_sym->loc_class () == LOC_ARG) && strcmp (prev_sym->linkage_name (), sym->linkage_name ()) == 0) { - prev_sym->set_aclass_index (stab_register_index); + prev_sym->set_loc_class_index (stab_register_index); /* Use the type from the LOC_REGISTER; that is the type that is actually in that register. */ prev_sym->set_type (sym->type ()); @@ -3663,7 +3663,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 'S': /* Static symbol at top level of file. */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); sym->set_value_address (valu); sym->set_domain (VAR_DOMAIN); add_symbol_to_list (sym, get_file_symbols ()); @@ -3694,7 +3694,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, if (nameless) return NULL; - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_value_longest (valu); sym->set_domain (TYPE_DOMAIN); /* C++ vagaries: we may have a type which is derived from @@ -3771,7 +3771,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, struct symbol *struct_sym = new (&objfile->objfile_obstack) symbol; *struct_sym = *sym; - struct_sym->set_aclass_index (LOC_TYPEDEF); + struct_sym->set_loc_class_index (LOC_TYPEDEF); struct_sym->set_value_longest (valu); struct_sym->set_domain (STRUCT_DOMAIN); if (sym->type ()->name () == 0) @@ -3798,7 +3798,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, if (nameless) return NULL; - sym->set_aclass_index (LOC_TYPEDEF); + sym->set_loc_class_index (LOC_TYPEDEF); sym->set_value_longest (valu); sym->set_domain (STRUCT_DOMAIN); if (sym->type ()->name () == 0) @@ -3813,7 +3813,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, struct symbol *typedef_sym = new (&objfile->objfile_obstack) symbol; *typedef_sym = *sym; - typedef_sym->set_aclass_index (LOC_TYPEDEF); + typedef_sym->set_loc_class_index (LOC_TYPEDEF); typedef_sym->set_value_longest (valu); typedef_sym->set_domain (TYPE_DOMAIN); if (sym->type ()->name () == 0) @@ -3827,7 +3827,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 'V': /* Static symbol of local scope. */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_STATIC); + sym->set_loc_class_index (LOC_STATIC); sym->set_value_address (valu); sym->set_domain (VAR_DOMAIN); add_symbol_to_list (sym, get_local_symbols ()); @@ -3836,7 +3836,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 'v': /* Reference parameter */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_REF_ARG); + sym->set_loc_class_index (LOC_REF_ARG); sym->set_is_argument (1); sym->set_value_longest (valu); sym->set_domain (VAR_DOMAIN); @@ -3846,7 +3846,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, case 'a': /* Reference parameter which is in a register. */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (stab_regparm_index); + sym->set_loc_class_index (stab_regparm_index); sym->set_is_argument (1); sym->set_value_longest (valu); sym->set_domain (VAR_DOMAIN); @@ -3859,7 +3859,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, that Pascal uses it too, but when I tried it Pascal used "x:3" (local symbol) instead. */ sym->set_type (read_type (&p, objfile)); - sym->set_aclass_index (LOC_LOCAL); + sym->set_loc_class_index (LOC_LOCAL); sym->set_value_longest (valu); sym->set_domain (VAR_DOMAIN); add_symbol_to_list (sym, get_local_symbols ()); @@ -3867,7 +3867,7 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, default: sym->set_type (error_type (&p, objfile)); - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); sym->set_value_longest (0); sym->set_domain (VAR_DOMAIN); add_symbol_to_list (sym, get_file_symbols ()); @@ -3883,12 +3883,12 @@ define_symbol (CORE_ADDR valu, const char *string, int desc, int type, { /* We have to convert LOC_REGISTER to LOC_REGPARM_ADDR (for variables passed in a register). */ - if (sym->aclass () == LOC_REGISTER) - sym->set_aclass_index (LOC_REGPARM_ADDR); + if (sym->loc_class () == LOC_REGISTER) + sym->set_loc_class_index (LOC_REGPARM_ADDR); /* Likewise for converting LOC_ARG to LOC_REF_ARG (for the 7th and subsequent arguments on SPARC, for example). */ - else if (sym->aclass () == LOC_ARG) - sym->set_aclass_index (LOC_REF_ARG); + else if (sym->loc_class () == LOC_ARG) + sym->set_loc_class_index (LOC_REF_ARG); } return sym; @@ -4139,7 +4139,7 @@ again: { struct symbol *sym = ppt->symbol[i]; - if (sym->aclass () == LOC_TYPEDEF + if (sym->loc_class () == LOC_TYPEDEF && sym->domain () == STRUCT_DOMAIN && (sym->type ()->code () == code) && strcmp (sym->linkage_name (), type_name) == 0) @@ -4431,8 +4431,9 @@ again: if (args == NULL) return error_type (pp, objfile); type = dbx_alloc_type (typenums, objfile); - smash_to_method_type (type, domain, return_type, args, - nargs, varargs); + smash_to_method_type (type, domain, return_type, + gdb::make_array_view (args, nargs), + varargs); } break; @@ -6059,7 +6060,7 @@ read_enum_type (const char **pp, struct type *type, sym->set_linkage_name (name); sym->set_language (get_current_subfile ()->language, &objfile->objfile_obstack); - sym->set_aclass_index (LOC_CONST); + sym->set_loc_class_index (LOC_CONST); sym->set_domain (VAR_DOMAIN); sym->set_value_longest (n); if (n < 0) @@ -6726,7 +6727,7 @@ common_block_end (struct objfile *objfile) sym = new (&objfile->objfile_obstack) symbol; /* Note: common_block_name already saved on objfile_obstack. */ sym->set_linkage_name (common_block_name); - sym->set_aclass_index (LOC_BLOCK); + sym->set_loc_class_index (LOC_BLOCK); /* Now we copy all the symbols which have been defined since the BCOMM. */ @@ -6934,7 +6935,7 @@ cleanup_undefined_types_1 (void) { struct symbol *sym = ppt->symbol[i]; - if (sym->aclass () == LOC_TYPEDEF + if (sym->loc_class () == LOC_TYPEDEF && sym->domain () == STRUCT_DOMAIN && (sym->type ()->code () == (*type)->code ()) && ((*type)->instance_flags () @@ -7044,7 +7045,7 @@ scan_file_globals (struct objfile *objfile) the same symbol if there are multiple references. */ if (sym) { - if (sym->aclass () == LOC_BLOCK) + if (sym->loc_class () == LOC_BLOCK) fix_common_block (sym, msymbol->value_address (resolve_objfile), msymbol->section_index ()); @@ -7090,8 +7091,8 @@ scan_file_globals (struct objfile *objfile) prev->set_value_address (0); /* Complain about unresolved common block symbols. */ - if (prev->aclass () == LOC_STATIC) - prev->set_aclass_index (LOC_UNRESOLVED); + if (prev->loc_class () == LOC_STATIC) + prev->set_loc_class_index (LOC_UNRESOLVED); else complaint (_("%s: common block `%s' from " "global_sym_chain unresolved"), @@ -7200,9 +7201,7 @@ hashname (const char *name) /* Initializer for this module. */ -void _initialize_stabsread (); -void -_initialize_stabsread () +INIT_GDB_FILE (stabsread) { undef_types_allocated = 20; undef_types_length = 0; diff --git a/gdb/stack.c b/gdb/stack.c index 6542840..c0af030 100644 --- a/gdb/stack.c +++ b/gdb/stack.c @@ -758,7 +758,7 @@ print_frame_args (const frame_print_options &fp_opts, break; } - switch (sym->aclass ()) + switch (sym->loc_class ()) { case LOC_ARG: case LOC_REF_ARG: @@ -813,7 +813,7 @@ print_frame_args (const frame_print_options &fp_opts, nsym = lookup_symbol_search_name (sym->search_name (), b, SEARCH_VAR_DOMAIN).symbol; gdb_assert (nsym != NULL); - if (nsym->aclass () == LOC_REGISTER + if (nsym->loc_class () == LOC_REGISTER && !nsym->is_argument ()) { /* There is a LOC_ARG/LOC_REGISTER pair. This means @@ -1165,10 +1165,10 @@ do_print_frame_info (struct ui_out *uiout, const frame_print_options &fp_opts, if (set_current_sal) { - CORE_ADDR pc; + std::optional<CORE_ADDR> pc; - if (get_frame_pc_if_available (frame, &pc)) - last_displayed_symtab_info.set (sal.pspace, pc, sal.symtab, sal.line); + if ((pc = get_frame_pc_if_available (frame))) + last_displayed_symtab_info.set (sal.pspace, *pc, sal.symtab, sal.line); else last_displayed_symtab_info.invalidate (); } @@ -1325,16 +1325,15 @@ print_frame (struct ui_out *uiout, enum language funlang = language_unknown; struct value_print_options opts; struct symbol *func; - CORE_ADDR pc = 0; - int pc_p; + std::optional <CORE_ADDR> pc; - pc_p = get_frame_pc_if_available (frame, &pc); + pc = get_frame_pc_if_available (frame); gdb::unique_xmalloc_ptr<char> funname = find_frame_funname (frame, &funlang, &func); annotate_frame_begin (print_level ? frame_relative_level (frame) : 0, - gdbarch, pc); + gdbarch, pc.value_or (0)); { ui_out_emit_tuple tuple_emitter (uiout, "frame"); @@ -1352,8 +1351,8 @@ print_frame (struct ui_out *uiout, || print_what == LOC_AND_ADDRESS) { annotate_frame_address (); - if (pc_p) - print_pc (uiout, gdbarch, frame, pc); + if (pc.has_value ()) + print_pc (uiout, gdbarch, frame, *pc); else uiout->field_string ("addr", "<unavailable>", metadata_style.style ()); @@ -1422,7 +1421,7 @@ print_frame (struct ui_out *uiout, } if (print_what != SHORT_LOCATION - && pc_p && (funname == NULL || sal.symtab == NULL)) + && pc.has_value () && (funname == NULL || sal.symtab == NULL)) { const char *lib = solib_name_from_address (get_frame_program_space (frame), @@ -1481,8 +1480,7 @@ info_frame_command_core (const frame_info_ptr &fi, bool selected_frame_p) enum language funlang = language_unknown; const char *pc_regname; struct gdbarch *gdbarch; - CORE_ADDR frame_pc; - int frame_pc_p; + std::optional<CORE_ADDR> frame_pc; /* Initialize it to avoid "may be used uninitialized" warning. */ CORE_ADDR caller_pc = 0; int caller_pc_p = 0; @@ -1503,7 +1501,7 @@ info_frame_command_core (const frame_info_ptr &fi, bool selected_frame_p) get_frame_pc(). */ pc_regname = "pc"; - frame_pc_p = get_frame_pc_if_available (fi, &frame_pc); + frame_pc = get_frame_pc_if_available (fi); func = get_frame_function (fi); symtab_and_line sal = find_frame_sal (fi); s = sal.symtab; @@ -1525,9 +1523,9 @@ info_frame_command_core (const frame_info_ptr &fi, bool selected_frame_p) funname = func_only.get (); } } - else if (frame_pc_p) + else if (frame_pc.has_value ()) { - bound_minimal_symbol msymbol = lookup_minimal_symbol_by_pc (frame_pc); + bound_minimal_symbol msymbol = lookup_minimal_symbol_by_pc (*frame_pc); if (msymbol.minsym != NULL) { funname = msymbol.minsym->print_name (); @@ -1548,7 +1546,7 @@ info_frame_command_core (const frame_info_ptr &fi, bool selected_frame_p) gdb_puts (paddress (gdbarch, get_frame_base (fi))); gdb_printf (":\n"); gdb_printf (" %s = ", pc_regname); - if (frame_pc_p) + if (frame_pc.has_value ()) gdb_puts (paddress (gdbarch, get_frame_pc (fi))); else fputs_styled ("<unavailable>", metadata_style.style (), gdb_stdout); @@ -2218,7 +2216,7 @@ iterate_over_block_locals (const struct block *b, { for (struct symbol *sym : block_iterator_range (b)) { - switch (sym->aclass ()) + switch (sym->loc_class ()) { case LOC_CONST: case LOC_CONST_BYTES: @@ -2337,9 +2335,9 @@ print_frame_local_vars (const frame_info_ptr &frame, { struct print_variable_and_value_data cb_data; const struct block *block; - CORE_ADDR pc; + std::optional<CORE_ADDR> pc; - if (!get_frame_pc_if_available (frame, &pc)) + if (!(pc = get_frame_pc_if_available (frame))) { if (!quiet) gdb_printf (stream, @@ -2499,11 +2497,11 @@ print_frame_arg_vars (const frame_info_ptr &frame, { struct print_variable_and_value_data cb_data; struct symbol *func; - CORE_ADDR pc; + std::optional<CORE_ADDR> pc; std::optional<compiled_regex> preg; std::optional<compiled_regex> treg; - if (!get_frame_pc_if_available (frame, &pc)) + if (!(pc = get_frame_pc_if_available (frame))) { if (!quiet) gdb_printf (stream, @@ -3262,9 +3260,7 @@ static struct cmd_list_element *select_frame_cmd_list = NULL; /* Commands with a prefix of `info frame'. */ static struct cmd_list_element *info_frame_cmd_list = NULL; -void _initialize_stack (); -void -_initialize_stack () +INIT_GDB_FILE (stack) { struct cmd_list_element *cmd; diff --git a/gdb/stap-probe.c b/gdb/stap-probe.c index 8cc7599..3b692e2 100644 --- a/gdb/stap-probe.c +++ b/gdb/stap-probe.c @@ -1748,9 +1748,7 @@ info_probes_stap_command (const char *arg, int from_tty) info_probes_for_spops (arg, from_tty, &stap_static_probe_ops); } -void _initialize_stap_probe (); -void -_initialize_stap_probe () +INIT_GDB_FILE (stap_probe) { all_static_probe_ops.push_back (&stap_static_probe_ops); diff --git a/gdb/std-regs.c b/gdb/std-regs.c index 2a3f93d..9940cb0 100644 --- a/gdb/std-regs.c +++ b/gdb/std-regs.c @@ -93,9 +93,7 @@ value_of_builtin_frame_ps_reg (const frame_info_ptr &frame, const void *baton) error (_("Standard register ``$ps'' is not available for this target")); } -void _initialize_frame_reg (); -void -_initialize_frame_reg () +INIT_GDB_FILE (frame_reg) { /* Frame based $fp, $pc, $sp and $ps. These only come into play when the target does not define its own version of these diff --git a/gdb/svr4-tls-tdep.c b/gdb/svr4-tls-tdep.c index 56e1470..1f36d57 100644 --- a/gdb/svr4-tls-tdep.c +++ b/gdb/svr4-tls-tdep.c @@ -1,6 +1,6 @@ /* Target-dependent code for GNU/Linux, architecture independent. - Copyright (C) 2009-2024 Free Software Foundation, Inc. + Copyright (C) 2009-2025 Free Software Foundation, Inc. This file is part of GDB. @@ -233,9 +233,7 @@ svr4_tls_register_tls_methods (struct gdbarch_info info, struct gdbarch *gdbarch gdbarch_data->get_tls_dtp_offset = get_tls_dtp_offset; } -void _initialize_svr4_tls_tdep (); -void -_initialize_svr4_tls_tdep () +INIT_GDB_FILE (svr4_tls_tdep) { add_setshow_boolean_cmd ("force-internal-tls-address-lookup", class_obscure, &force_internal_tls_address_lookup, _("\ diff --git a/gdb/symfile-debug.c b/gdb/symfile-debug.c index 9c5ce85..a5ff21e 100644 --- a/gdb/symfile-debug.c +++ b/gdb/symfile-debug.c @@ -895,9 +895,7 @@ show_debug_symfile (struct ui_file *file, int from_tty, gdb_printf (file, _("Symfile debugging is %s.\n"), value); } -void _initialize_symfile_debug (); -void -_initialize_symfile_debug () +INIT_GDB_FILE (symfile_debug) { add_setshow_boolean_cmd ("symfile", no_class, &debug_symfile, _("\ Set debugging of the symfile functions."), _("\ diff --git a/gdb/symfile-mem.c b/gdb/symfile-mem.c index 92672d7..274dc0f 100644 --- a/gdb/symfile-mem.c +++ b/gdb/symfile-mem.c @@ -204,9 +204,7 @@ add_vsyscall_page (inferior *inf) } } -void _initialize_symfile_mem (); -void -_initialize_symfile_mem () +INIT_GDB_FILE (symfile_mem) { add_cmd ("add-symbol-file-from-memory", class_files, add_symbol_file_from_memory_command, diff --git a/gdb/symfile.c b/gdb/symfile.c index 9a6322d..0e47f50 100644 --- a/gdb/symfile.c +++ b/gdb/symfile.c @@ -1101,7 +1101,7 @@ symbol_file_add_with_addrs (const gdb_bfd_ref_ptr &abfd, const char *name, no separate debug file. If there is a separate debug file which does not have symbols, we'll have emitted this message for that file, and so printing it twice is just redundant. */ - if (should_print && !objfile_has_symbols (objfile) + if (should_print && !objfile->has_symbols () && objfile->separate_debug_objfile == nullptr) gdb_printf (_("(No debugging symbols found in %ps)\n"), styled_string (file_name_style.style (), name)); @@ -2323,7 +2323,7 @@ add_symbol_file_command (const char *args, int from_tty) objf = symbol_file_add (filename.get (), add_flags, §ion_addrs, flags); - if (!objfile_has_symbols (objf) && objf->per_bfd->minimal_symbol_count <= 0) + if (!objf->has_symbols () && objf->per_bfd->minimal_symbol_count <= 0) warning (_("newly-added symbol file \"%ps\" does not provide any symbols"), styled_string (file_name_style.style (), filename.get ())); @@ -2662,7 +2662,7 @@ reread_symbols (int from_tty) objfile->expand_all_symtabs (); } - if (!objfile_has_symbols (objfile)) + if (!objfile->has_symbols ()) { gdb_stdout->wrap_here (0); gdb_printf (_("(no debugging symbols found)\n")); @@ -3849,9 +3849,7 @@ test_set_ext_lang_command () #endif /* GDB_SELF_TEST */ -void _initialize_symfile (); -void -_initialize_symfile () +INIT_GDB_FILE (symfile) { struct cmd_list_element *c; diff --git a/gdb/symmisc.c b/gdb/symmisc.c index 8a95958..a352e06 100644 --- a/gdb/symmisc.c +++ b/gdb/symmisc.c @@ -537,7 +537,7 @@ print_symbol (struct gdbarch *gdbarch, struct symbol *symbol, } else { - if (symbol->aclass () == LOC_TYPEDEF) + if (symbol->loc_class () == LOC_TYPEDEF) gdb_printf (outfile, "typedef "); if (symbol->type ()) { @@ -552,7 +552,7 @@ print_symbol (struct gdbarch *gdbarch, struct symbol *symbol, else gdb_printf (outfile, "%s ", symbol->print_name ()); - switch (symbol->aclass ()) + switch (symbol->loc_class ()) { case LOC_CONST: gdb_printf (outfile, "const %s (%s)", @@ -646,7 +646,7 @@ print_symbol (struct gdbarch *gdbarch, struct symbol *symbol, default: gdb_printf (outfile, "botched symbol class %x", - symbol->aclass ()); + symbol->loc_class ()); break; } } @@ -1051,9 +1051,7 @@ maintenance_info_line_tables (const char *regexp, int from_tty) /* Do early runtime initializations. */ -void _initialize_symmisc (); -void -_initialize_symmisc () +INIT_GDB_FILE (symmisc) { add_cmd ("symbols", class_maintenance, maintenance_print_symbols, _("\ Print dump of current symbol definitions.\n\ diff --git a/gdb/symtab.c b/gdb/symtab.c index 5147aee..0d110e4 100644 --- a/gdb/symtab.c +++ b/gdb/symtab.c @@ -60,7 +60,6 @@ #include "cp-abi.h" #include "cp-support.h" #include "observable.h" -#include "solist.h" #include "macrotab.h" #include "macroscope.h" @@ -1781,7 +1780,7 @@ fixup_symbol_section (struct symbol *sym, struct objfile *objfile) index without doing the check that is done by the wrapper macros like SECT_OFF_TEXT. */ int fallback; - switch (sym->aclass ()) + switch (sym->loc_class ()) { case LOC_STATIC: fallback = objfile->sect_index_data; @@ -2163,13 +2162,6 @@ lookup_symbol_aux (const char *name, symbol_name_match_type match_type, domain_name (domain).c_str (), language_str (language)); } - /* Make sure we do something sensible with is_a_field_of_this, since - the callers that set this parameter to some non-null value will - certainly use it later. If we don't set it, the contents of - is_a_field_of_this are undefined. */ - if (is_a_field_of_this != NULL) - memset (is_a_field_of_this, 0, sizeof (*is_a_field_of_this)); - langdef = language_def (language); /* Search specified block and its superiors. Don't search @@ -3046,7 +3038,7 @@ find_symbol_at_address (CORE_ADDR address) for (struct symbol *sym : block_iterator_range (b)) { - if (sym->aclass () == LOC_STATIC + if (sym->loc_class () == LOC_STATIC && sym->value_address () == addr) return sym; } @@ -4318,7 +4310,7 @@ find_function_alias_target (bound_minimal_symbol msymbol) symbol *sym = find_pc_function (func_addr); if (sym != NULL - && sym->aclass () == LOC_BLOCK + && sym->loc_class () == LOC_BLOCK && sym->value_block ()->entry_pc () == func_addr) return sym; @@ -4499,7 +4491,7 @@ info_sources_filter::matches (const char *fullname) const switch (m_match_type) { case match_on::DIRNAME: - dirname = ldirname (fullname); + dirname = gdb_ldirname (fullname); to_match = dirname.c_str (); break; case match_on::BASENAME: @@ -4714,7 +4706,7 @@ info_sources_worker (struct ui_out *uiout, if (uiout->is_mi_like_p ()) { const char *debug_info_state; - if (objfile_has_symbols (objfile)) + if (objfile->has_symbols ()) { if (debug_fully_readin) debug_info_state = "fully-read"; @@ -4730,7 +4722,7 @@ info_sources_worker (struct ui_out *uiout, if (!debug_fully_readin) uiout->text ("(Full debug information has not yet been read " "for this file.)\n"); - if (!objfile_has_symbols (objfile)) + if (!objfile->has_symbols ()) uiout->text ("(Objfile has no debug information.)\n"); uiout->text ("\n"); } @@ -5029,12 +5021,12 @@ global_symbol_searcher::add_matching_symbols if ((kind & SEARCH_VAR_DOMAIN) != 0) { - if (sym->aclass () == LOC_UNRESOLVED + if (sym->loc_class () == LOC_UNRESOLVED /* LOC_CONST can be used for more than just enums, e.g., c++ static const members. We only want to skip enums here. */ - || (sym->aclass () == LOC_CONST + || (sym->loc_class () == LOC_CONST && (sym->type ()->code () == TYPE_CODE_ENUM))) continue; } @@ -5242,7 +5234,7 @@ symbol_to_info_string (struct symbol *sym, int block) string_file tmp_stream; type_print (sym->type (), - (sym->aclass () == LOC_TYPEDEF + (sym->loc_class () == LOC_TYPEDEF ? "" : sym->print_name ()), &tmp_stream, 0); @@ -5761,7 +5753,7 @@ completion_list_add_symbol (completion_tracker &tracker, the msymbol name and removes the msymbol name from the completion tracker. */ if (sym->language () == language_cplus - && sym->aclass () == LOC_BLOCK) + && sym->loc_class () == LOC_BLOCK) { /* The call to canonicalize returns the empty string if the input string is already in canonical form, thanks to this we don't @@ -5906,7 +5898,7 @@ completion_list_add_fields (completion_tracker &tracker, const lookup_name_info &lookup_name, const char *text, const char *word) { - if (sym->aclass () == LOC_TYPEDEF) + if (sym->loc_class () == LOC_TYPEDEF) { struct type *t = sym->type (); enum type_code c = t->code (); @@ -5958,7 +5950,7 @@ symbol_is_function_or_method (minimal_symbol *msymbol) bound_minimal_symbol find_gnu_ifunc (const symbol *sym) { - if (sym->aclass () != LOC_BLOCK) + if (sym->loc_class () != LOC_BLOCK) return {}; lookup_name_info lookup_name (sym->search_name (), @@ -6206,8 +6198,6 @@ default_collect_symbol_completion_matches_break_on if (current_language->macro_expansion () == macro_expansion_c && code == TYPE_CODE_UNDEF) { - gdb::unique_xmalloc_ptr<struct macro_scope> scope; - /* This adds a macro's name to the current completion list. */ auto add_macro_name = [&] (const char *macro_name, const macro_definition *, @@ -6225,10 +6215,9 @@ default_collect_symbol_completion_matches_break_on resulting expression will be evaluated at "file:line" -- but at there does not seem to be a way to detect this at completion time. */ - scope = default_macro_scope (); - if (scope) - macro_for_each_in_scope (scope->file, scope->line, - add_macro_name); + macro_scope scope = default_macro_scope (); + if (scope.is_valid ()) + macro_for_each_in_scope (scope.file, scope.line, add_macro_name); /* User-defined macros are always visible. */ macro_for_each (macro_user_macros, add_macro_name); @@ -6413,7 +6402,7 @@ add_partial_filename_data::operator() (const char *filename, program. */ completion_list -make_source_files_completion_list (const char *text, const char *word) +make_source_files_completion_list (const char *text) { size_t text_len = strlen (text); completion_list list; @@ -6439,7 +6428,7 @@ make_source_files_completion_list (const char *text, const char *word) { /* This file matches for a completion; add it to the current list of matches. */ - add_filename_to_list (s->filename, text, word, &list); + add_filename_to_list (s->filename, text, text, &list); } else { @@ -6451,7 +6440,7 @@ make_source_files_completion_list (const char *text, const char *word) if (base_name != s->filename && !filenames_seen.seen (base_name) && filename_ncmp (base_name, text, text_len) == 0) - add_filename_to_list (base_name, text, word, &list); + add_filename_to_list (base_name, text, text, &list); } } } @@ -6459,7 +6448,7 @@ make_source_files_completion_list (const char *text, const char *word) datum.filename_seen_cache = &filenames_seen; datum.text = text; - datum.word = word; + datum.word = text; datum.text_len = text_len; datum.list = &list; map_symbol_filenames (datum, false /*need_fullname*/); @@ -6640,13 +6629,13 @@ main_language (void) /* The next index to hand out in response to a registration request. */ -static int next_aclass_value = LOC_FINAL_VALUE; +static int next_loc_class_value = LOC_FINAL_VALUE; -/* The maximum number of "aclass" registrations we support. This is +/* The maximum number of "loc_class" registrations we support. This is constant for convenience. */ #define MAX_SYMBOL_IMPLS (LOC_FINAL_VALUE + 11) -/* The objects representing the various "aclass" values. The elements +/* The objects representing the various "loc_class" values. The elements from 0 up to LOC_FINAL_VALUE-1 represent themselves, and subsequent elements are those registered at gdb initialization time. */ @@ -6659,22 +6648,22 @@ gdb::array_view<const struct symbol_impl> symbol_impls (symbol_impl); /* Make sure we saved enough room in struct symbol. */ -static_assert (MAX_SYMBOL_IMPLS <= (1 << SYMBOL_ACLASS_BITS)); +static_assert (MAX_SYMBOL_IMPLS <= (1 << SYMBOL_LOC_CLASS_BITS)); -/* Register a computed symbol type. ACLASS must be LOC_COMPUTED. OPS +/* Register a computed symbol type. LOC_CLASS must be LOC_COMPUTED. OPS is the ops vector associated with this index. This returns the new - index, which should be used as the aclass_index field for symbols + index, which should be used as the loc_class_index field for symbols of this type. */ int -register_symbol_computed_impl (enum address_class aclass, +register_symbol_computed_impl (location_class loc_class, const struct symbol_computed_ops *ops) { - int result = next_aclass_value++; + int result = next_loc_class_value++; - gdb_assert (aclass == LOC_COMPUTED); + gdb_assert (loc_class == LOC_COMPUTED); gdb_assert (result < MAX_SYMBOL_IMPLS); - symbol_impl[result].aclass = aclass; + symbol_impl[result].loc_class = loc_class; symbol_impl[result].ops_computed = ops; /* Sanity check OPS. */ @@ -6687,20 +6676,20 @@ register_symbol_computed_impl (enum address_class aclass, return result; } -/* Register a function with frame base type. ACLASS must be LOC_BLOCK. +/* Register a function with frame base type. LOC_CLASS must be LOC_BLOCK. OPS is the ops vector associated with this index. This returns the - new index, which should be used as the aclass_index field for symbols + new index, which should be used as the loc_class_index field for symbols of this type. */ int -register_symbol_block_impl (enum address_class aclass, +register_symbol_block_impl (location_class loc_class, const struct symbol_block_ops *ops) { - int result = next_aclass_value++; + int result = next_loc_class_value++; - gdb_assert (aclass == LOC_BLOCK); + gdb_assert (loc_class == LOC_BLOCK); gdb_assert (result < MAX_SYMBOL_IMPLS); - symbol_impl[result].aclass = aclass; + symbol_impl[result].loc_class = loc_class; symbol_impl[result].ops_block = ops; /* Sanity check OPS. */ @@ -6711,35 +6700,33 @@ register_symbol_block_impl (enum address_class aclass, return result; } -/* Register a register symbol type. ACLASS must be LOC_REGISTER or +/* Register a register symbol type. LOC_CLASS must be LOC_REGISTER or LOC_REGPARM_ADDR. OPS is the register ops vector associated with this index. This returns the new index, which should be used as - the aclass_index field for symbols of this type. */ + the loc_class_index field for symbols of this type. */ int -register_symbol_register_impl (enum address_class aclass, +register_symbol_register_impl (location_class loc_class, const struct symbol_register_ops *ops) { - int result = next_aclass_value++; + int result = next_loc_class_value++; - gdb_assert (aclass == LOC_REGISTER || aclass == LOC_REGPARM_ADDR); + gdb_assert (loc_class == LOC_REGISTER || loc_class == LOC_REGPARM_ADDR); gdb_assert (result < MAX_SYMBOL_IMPLS); - symbol_impl[result].aclass = aclass; + symbol_impl[result].loc_class = loc_class; symbol_impl[result].ops_register = ops; return result; } /* Initialize elements of 'symbol_impl' for the constants in enum - address_class. */ + location_class. */ static void initialize_ordinary_address_classes (void) { - int i; - - for (i = 0; i < LOC_FINAL_VALUE; ++i) - symbol_impl[i].aclass = (enum address_class) i; + for (int i = 0; i < LOC_FINAL_VALUE; ++i) + symbol_impl[i].loc_class = static_cast<location_class> (i); } @@ -6787,7 +6774,7 @@ CORE_ADDR symbol::get_maybe_copied_address () const { gdb_assert (this->maybe_copied); - gdb_assert (this->aclass () == LOC_STATIC); + gdb_assert (this->loc_class () == LOC_STATIC); const char *linkage_name = this->linkage_name (); bound_minimal_symbol minsym @@ -6997,11 +6984,8 @@ info_module_subcommand (bool quiet, const char *module_regexp, const char *last_filename = ""; const symbol *last_module_symbol = nullptr; - for (const module_symbol_search &ms : module_symbols) + for (const auto &[p, q] : module_symbols) { - const symbol_search &p = ms.first; - const symbol_search &q = ms.second; - gdb_assert (q.symbol != nullptr); if (last_module_symbol != p.symbol) @@ -7120,9 +7104,7 @@ info_module_var_func_command_completer (struct cmd_list_element *ignore, -void _initialize_symtab (); -void -_initialize_symtab () +INIT_GDB_FILE (symtab) { cmd_list_element *c; diff --git a/gdb/symtab.h b/gdb/symtab.h index e547d10..25f2aaf 100644 --- a/gdb/symtab.h +++ b/gdb/symtab.h @@ -967,9 +967,9 @@ to_scripting_domain (domain_search_flags val) Throws an exception if VAL is not one of the allowable values. */ extern domain_search_flags from_scripting_domain (int val); -/* An address-class says where to find the value of a symbol. */ +/* A location class says where to find the value of a symbol. */ -enum address_class +enum location_class { /* Not used; catches errors. */ @@ -1078,14 +1078,14 @@ enum address_class LOC_FINAL_VALUE }; -/* The number of bits needed for values in enum address_class, with some +/* The number of bits needed for values in enum location_class, with some padding for reasonable growth, and room for run-time registered address classes. See symtab.c:MAX_SYMBOL_IMPLS. This is a #define so that we can have a assertion elsewhere to verify that we have reserved enough space for synthetic address classes. */ -#define SYMBOL_ACLASS_BITS 5 -static_assert (LOC_FINAL_VALUE <= (1 << SYMBOL_ACLASS_BITS)); +#define SYMBOL_LOC_CLASS_BITS 5 +static_assert (LOC_FINAL_VALUE <= (1 << SYMBOL_LOC_CLASS_BITS)); /* The methods needed to implement LOC_COMPUTED. These methods can use the symbol's .aux_value for additional per-symbol information. @@ -1202,7 +1202,7 @@ struct symbol_register_ops struct symbol_impl { - enum address_class aclass; + location_class loc_class; /* Used with LOC_COMPUTED. */ const struct symbol_computed_ops *ops_computed; @@ -1238,7 +1238,7 @@ struct symbol : public general_symbol_info, public allocate_on_obstack<symbol> symbol () /* Class-initialization of bitfields is only allowed in C++20. */ : m_domain (UNDEF_DOMAIN), - m_aclass_index (0), + m_loc_class_index (0), m_is_objfile_owned (1), m_is_argument (0), m_is_inlined (0), @@ -1262,14 +1262,14 @@ struct symbol : public general_symbol_info, public allocate_on_obstack<symbol> symbol (const symbol &) = default; symbol &operator= (const symbol &) = default; - void set_aclass_index (unsigned int aclass_index) + void set_loc_class_index (unsigned int loc_class_index) { - m_aclass_index = aclass_index; + m_loc_class_index = loc_class_index; } const symbol_impl &impl () const { - return symbol_impls[this->m_aclass_index]; + return symbol_impls[this->m_loc_class_index]; } const symbol_block_ops *block_ops () const @@ -1287,9 +1287,9 @@ struct symbol : public general_symbol_info, public allocate_on_obstack<symbol> return this->impl ().ops_register; } - address_class aclass () const + location_class loc_class () const { - return this->impl ().aclass; + return this->impl ().loc_class; } /* Return true if this symbol's domain matches FLAGS. */ @@ -1480,11 +1480,11 @@ struct symbol : public general_symbol_info, public allocate_on_obstack<symbol> ENUM_BITFIELD(domain_enum) m_domain : SYMBOL_DOMAIN_BITS; - /* Address class. This holds an index into the 'symbol_impls' - table. The actual enum address_class value is stored there, + /* Location class. This holds an index into the 'symbol_impls' + table. The actual location_class value is stored there, alongside any per-class ops vectors. */ - unsigned int m_aclass_index : SYMBOL_ACLASS_BITS; + unsigned int m_loc_class_index : SYMBOL_LOC_CLASS_BITS; /* If non-zero then symbol is objfile-owned, use owner.symtab. Otherwise symbol is arch-owned, use owner.arch. */ @@ -1575,13 +1575,13 @@ symbol::value_block () const return m_value.block; } -extern int register_symbol_computed_impl (enum address_class, +extern int register_symbol_computed_impl (location_class, const struct symbol_computed_ops *); -extern int register_symbol_block_impl (enum address_class aclass, +extern int register_symbol_block_impl (location_class loc_class, const struct symbol_block_ops *ops); -extern int register_symbol_register_impl (enum address_class, +extern int register_symbol_register_impl (location_class, const struct symbol_register_ops *); /* An instance of this type is used to represent a C++ template @@ -2101,17 +2101,17 @@ struct field_of_this_result symbol was not found in 'this'. If non-NULL, then one of the other fields will be non-NULL as well. */ - struct type *type; + struct type *type = nullptr; /* If the symbol was found as an ordinary field of 'this', then this is non-NULL and points to the particular field. */ - struct field *field; + struct field *field = nullptr; /* If the symbol was found as a function field of 'this', then this is non-NULL and points to the particular field. */ - struct fn_fieldlist *fn_field; + struct fn_fieldlist *fn_field = nullptr; }; /* Find the definition for a specified symbol name NAME @@ -2482,8 +2482,7 @@ extern void collect_file_symbol_completion_matches symbol_name_match_type name_match_type, const char *, const char *, const char *); -extern completion_list - make_source_files_completion_list (const char *, const char *); +extern completion_list make_source_files_completion_list (const char *); /* Return whether SYM is a function/method, as opposed to a data symbol. */ diff --git a/gdb/syscalls/riscv-canonicalize-syscall-gen.py b/gdb/syscalls/riscv-canonicalize-syscall-gen.py index c7dda93..40039bb 100755 --- a/gdb/syscalls/riscv-canonicalize-syscall-gen.py +++ b/gdb/syscalls/riscv-canonicalize-syscall-gen.py @@ -111,7 +111,7 @@ class Generator: canon_syscalls[syscall_num] = value # this is a place for corner cases elif syscall_name == "mmap": - gdb_old_syscall_name = "gdb_old_mmap" + gdb_old_syscall_name = "gdb_sys_old_mmap" value = ( f" case {syscall_num}: return {gdb_old_syscall_name};\n" ) diff --git a/gdb/target-connection.c b/gdb/target-connection.c index 60d7732..02eea05 100644 --- a/gdb/target-connection.c +++ b/gdb/target-connection.c @@ -149,10 +149,7 @@ info_connections_command (const char *args, int from_tty) print_connection (current_uiout, args); } -void _initialize_target_connection (); - -void -_initialize_target_connection () +INIT_GDB_FILE (target_connection) { add_info ("connections", info_connections_command, _("\ diff --git a/gdb/target-dcache.c b/gdb/target-dcache.c index 9fcdd1e..6be1224 100644 --- a/gdb/target-dcache.c +++ b/gdb/target-dcache.c @@ -161,9 +161,7 @@ maint_flush_dcache_command (const char *command, int from_tty) gdb_printf (_("The dcache was flushed.\n")); } -void _initialize_target_dcache (); -void -_initialize_target_dcache () +INIT_GDB_FILE (target_dcache) { add_setshow_boolean_cmd ("stack-cache", class_support, &stack_cache_enabled_1, _("\ diff --git a/gdb/target-descriptions.c b/gdb/target-descriptions.c index 8042d25..dc5fbac 100644 --- a/gdb/target-descriptions.c +++ b/gdb/target-descriptions.c @@ -1880,9 +1880,7 @@ maintenance_check_xml_descriptions (const char *dir, int from_tty) (long) selftests::xml_tdesc.size (), failed); } -void _initialize_target_descriptions (); -void -_initialize_target_descriptions () +INIT_GDB_FILE (target_descriptions) { cmd_list_element *cmd; diff --git a/gdb/target.c b/gdb/target.c index 522bed8..f7c43f6 100644 --- a/gdb/target.c +++ b/gdb/target.c @@ -2464,6 +2464,7 @@ target_pre_inferior () if (!gdbarch_has_global_solist (current_inferior ()->arch ())) { no_shared_libraries (current_program_space); + current_program_space->unset_solib_ops (); invalidate_target_mem_regions (); @@ -3204,8 +3205,8 @@ target_ops::fileio_fstat (int fd, struct stat *sb, fileio_error *target_errno) } int -target_ops::fileio_stat (struct inferior *inf, const char *filename, - struct stat *sb, fileio_error *target_errno) +target_ops::fileio_lstat (struct inferior *inf, const char *filename, + struct stat *sb, fileio_error *target_errno) { *target_errno = FILEIO_ENOSYS; return -1; @@ -3331,17 +3332,17 @@ target_fileio_fstat (int fd, struct stat *sb, fileio_error *target_errno) /* See target.h. */ int -target_fileio_stat (struct inferior *inf, const char *filename, - struct stat *sb, fileio_error *target_errno) +target_fileio_lstat (struct inferior *inf, const char *filename, + struct stat *sb, fileio_error *target_errno) { for (target_ops *t = default_fileio_target (); t != NULL; t = t->beneath ()) { - int ret = t->fileio_stat (inf, filename, sb, target_errno); + int ret = t->fileio_lstat (inf, filename, sb, target_errno); if (ret == -1 && *target_errno == FILEIO_ENOSYS) continue; - target_debug_printf_nofunc ("target_fileio_stat (%s) = %d (%d)", + target_debug_printf_nofunc ("target_fileio_lstat (%s) = %d (%d)", filename, ret, ret != -1 ? 0 : *target_errno); return ret; @@ -4502,10 +4503,7 @@ set_write_memory_registers_permission (const char *args, int from_tty, update_observer_mode (); } -void _initialize_target (); - -void -_initialize_target () +INIT_GDB_FILE (target) { the_debug_target = new debug_target (); diff --git a/gdb/target.h b/gdb/target.h index 2d3bac7..365e894 100644 --- a/gdb/target.h +++ b/gdb/target.h @@ -1016,8 +1016,8 @@ struct target_ops filesystem seen by the debugger (GDB or, for remote targets, the remote stub). Return 0 on success, or -1 if an error occurs (and set *TARGET_ERRNO). */ - virtual int fileio_stat (struct inferior *inf, const char *filename, - struct stat *sb, fileio_error *target_errno); + virtual int fileio_lstat (struct inferior *inf, const char *filename, + struct stat *sb, fileio_error *target_errno); /* Close FD on the target. Return 0, or -1 if an error occurs (and set *TARGET_ERRNO). */ @@ -2256,8 +2256,8 @@ extern int target_fileio_fstat (int fd, struct stat *sb, filesystem seen by the debugger (GDB or, for remote targets, the remote stub). Return 0 on success, or -1 if an error occurs (and set *TARGET_ERRNO). */ -extern int target_fileio_stat (struct inferior *inf, const char *filename, - struct stat *sb, fileio_error *target_errno); +extern int target_fileio_lstat (struct inferior *inf, const char *filename, + struct stat *sb, fileio_error *target_errno); /* Close FD on the target. Return 0, or -1 if an error occurs (and set *TARGET_ERRNO). */ diff --git a/gdb/terminal.h b/gdb/terminal.h index 54e5e98..720fd4a 100644 --- a/gdb/terminal.h +++ b/gdb/terminal.h @@ -19,6 +19,8 @@ #ifndef GDB_TERMINAL_H #define GDB_TERMINAL_H +#include "serial.h" + struct inferior; extern void new_tty_prefork (std::string ttyname); @@ -43,4 +45,17 @@ extern void gdb_save_tty_state (void); have had a chance to alter it. */ extern void set_initial_gdb_ttystate (void); +/* Restore initial tty state. */ +extern void restore_initial_gdb_ttystate (void); + +/* An RAII-based object that saves the tty state, and then restores it again + when this object is destroyed. */ +class scoped_gdb_ttystate +{ +public: + scoped_gdb_ttystate (); + ~scoped_gdb_ttystate (); +private: + serial_ttystate m_ttystate; +}; #endif /* GDB_TERMINAL_H */ diff --git a/gdb/testsuite/Makefile.in b/gdb/testsuite/Makefile.in index 4a6665d..fa2d9eb 100644 --- a/gdb/testsuite/Makefile.in +++ b/gdb/testsuite/Makefile.in @@ -386,7 +386,17 @@ check-all-boards: all $(abs_builddir)/site.exp ${abs_srcdir}/make-check-all.sh --keep-results \ --host-user "$(GDB_HOST_USERNAME)" \ --target-user "$(GDB_TARGET_USERNAME)" \ - "$(TESTS)" + "$(TESTS)" \ + result=$$?; \ + if test -d check-all; then \ + $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \ + `find check-all -name gdb.sum -print` > check-all/gdb.sum; \ + $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \ + `find check-all -name gdb.log -print` > check-all/gdb.log; \ + sed -n '/=== gdb Summary ===/,$$ p' check-all/gdb.sum; \ + fi; \ + exit $$result + force:; diff --git a/gdb/testsuite/gdb.ada/dyn-bit-offset.exp b/gdb/testsuite/gdb.ada/dyn-bit-offset.exp index 19d16b1..f8a4363 100644 --- a/gdb/testsuite/gdb.ada/dyn-bit-offset.exp +++ b/gdb/testsuite/gdb.ada/dyn-bit-offset.exp @@ -28,19 +28,52 @@ if {[gdb_compile_ada "${srcfile}" "${binfile}" executable $flags] != ""} { return -1 } +# GCC needs to have fixes: +# - 809b46d2ccc ("Partially lift restriction from loc_list_from_tree_1") +# - d7f24e37d4b ("Fix oversight about big-endian targets in latest change") +set have_xfail [gnat_version_compare <= {16 1}] + clean_restart ${testfile} set bp_location [gdb_get_line_number "STOP" ${testdir}/exam.adb] runto "exam.adb:$bp_location" +set re_pass \ + [string_to_regexp \ + " = (discr => 3, array_field => (-5, -6, -7), field => -5, another_field => -6)"] +set re_xfail_le \ + [string_to_regexp \ + " = (discr => 3, array_field => (-5, -6, -7), field => -4, another_field => -4)"] +set re_xfail_be \ + [string_to_regexp \ + " = (discr => 3, array_field => (-5, -6, -7), field => -6, another_field => -6)"] + gdb_test_multiple "print spr" "" { - -re -wrap " = \\(discr => 3, array_field => \\(-5, -6, -7\\), field => -4, another_field => -6\\)" { + -re -wrap $re_pass { pass $gdb_test_name } - -re -wrap " = \\(discr => 3, array_field => \\(-5, -6, -7\\), field => -4, another_field => -4\\)" { - # A known GCC bug. - xfail $gdb_test_name + -re -wrap $re_xfail_le|$re_xfail_be { + if { $have_xfail } { + xfail $gdb_test_name + } else { + fail $gdb_test_name + } } } -gdb_test "print spr.field" " = -4" +set re_pass " = -5" +set re_xfail_le " = -4" +set re_xfail_be " = -6" + +gdb_test_multiple "print spr.field" "" { + -re -wrap $re_pass { + pass $gdb_test_name + } + -re -wrap $re_xfail_le|$re_xfail_be { + if { $have_xfail } { + xfail $gdb_test_name + } else { + fail $gdb_test_name + } + } +} diff --git a/gdb/testsuite/gdb.ada/dyn-bit-offset/exam.adb b/gdb/testsuite/gdb.ada/dyn-bit-offset/exam.adb index a882afd..5c7f70b 100644 --- a/gdb/testsuite/gdb.ada/dyn-bit-offset/exam.adb +++ b/gdb/testsuite/gdb.ada/dyn-bit-offset/exam.adb @@ -36,7 +36,7 @@ procedure Exam is pragma No_Component_Reordering (Some_Packed_Record); SPR : Some_Packed_Record := (Discr => 3, - Field => -4, + Field => -5, Another_Field => -6, Array_Field => (-5, -6, -7)); diff --git a/gdb/testsuite/gdb.ada/finish-var-size.exp b/gdb/testsuite/gdb.ada/finish-var-size.exp index e038ed4..ae30086 100644 --- a/gdb/testsuite/gdb.ada/finish-var-size.exp +++ b/gdb/testsuite/gdb.ada/finish-var-size.exp @@ -22,7 +22,13 @@ require {expr [gcc_major_version] >= 12} standard_ada_testfile p -if {[gdb_compile_ada "${srcfile}" "${binfile}" executable debug] != ""} { +set opts {} +lappend opts debug +if { [have_fvar_tracking] } { + lappend opts additional_flags=-fvar-tracking +} + +if {[gdb_compile_ada "${srcfile}" "${binfile}" executable $opts] != ""} { return -1 } diff --git a/gdb/testsuite/gdb.ada/negative-bit-offset.exp b/gdb/testsuite/gdb.ada/negative-bit-offset.exp new file mode 100644 index 0000000..c5fcae1 --- /dev/null +++ b/gdb/testsuite/gdb.ada/negative-bit-offset.exp @@ -0,0 +1,36 @@ +# Copyright 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test negative DW_AT_bit_offset. + +load_lib "ada.exp" + +require allow_ada_tests + +standard_ada_testfile prog + +# This particular output is only generated with -gdwarf-4. +if {[gdb_compile_ada "${srcfile}" "${binfile}" executable \ + {debug additional_flags=-gdwarf-4}] != ""} { + return +} + +clean_restart ${testfile} + +set bp_location [gdb_get_line_number "STOP" ${testdir}/prog.adb] +runto "prog.adb:$bp_location" + +gdb_test "print xp" \ + [string_to_regexp "(x => 21, y => (-1, -2, -3, -4, -5, -6, -7, -8, -9, -10))"] diff --git a/gdb/testsuite/gdb.ada/negative-bit-offset/prog.adb b/gdb/testsuite/gdb.ada/negative-bit-offset/prog.adb new file mode 100644 index 0000000..e3c1775 --- /dev/null +++ b/gdb/testsuite/gdb.ada/negative-bit-offset/prog.adb @@ -0,0 +1,36 @@ +-- Copyright 2025 Free Software Foundation, Inc. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 3 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License +-- along with this program. If not, see <http://www.gnu.org/licenses/>. + +procedure Prog is + + type Small is range -32 .. 31; + for Small'Size use 6; + + type SomeArray is array (POSITIVE range <>) of Small; + + type SomePackedArray is array (POSITIVE range <>) of Small; + pragma Pack (SomePackedArray); + + type SomePackedRecord is record + X: Small; + Y: SomePackedArray (1 .. 10); + end record; + pragma Pack (SomePackedRecord); + + XP: SomePackedRecord := (21, (-1, -2, -3, -4, -5, -6, -7, -8, -9, -10)); + +begin + null; -- STOP +end; diff --git a/gdb/testsuite/gdb.ada/operator_call.exp b/gdb/testsuite/gdb.ada/operator_call.exp index e96107b..dc7f679 100644 --- a/gdb/testsuite/gdb.ada/operator_call.exp +++ b/gdb/testsuite/gdb.ada/operator_call.exp @@ -71,6 +71,12 @@ proc test_with_menu {command result} { fail $command } } + "Argument to arithmetic operation not a number or boolean." { + fail $command + } + -re "No definition of \".*\" in current context." { + fail $command + } timeout { fail "$command (timeout)" } diff --git a/gdb/testsuite/gdb.ada/return-small-char-array.exp b/gdb/testsuite/gdb.ada/return-small-char-array.exp new file mode 100644 index 0000000..75c781e --- /dev/null +++ b/gdb/testsuite/gdb.ada/return-small-char-array.exp @@ -0,0 +1,40 @@ +# Copyright 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +load_lib "ada.exp" + +require allow_ada_tests + +standard_ada_testfile proc + +if { [gdb_compile_ada $srcfile $binfile executable debug] != "" } { + return -1 +} + +clean_restart $testfile + +set bp_location [gdb_get_line_number "STOP" $testdir/proc.adb] +runto "proc.adb:$bp_location" + +gdb_test "print Value.Name(My_Value)" \ + { = "abcd"} + +# Step into the function. +gdb_test "step 2" \ + "return Of_Value;" + +# and finish. +gdb_test "finish" \ + { = "abcd"} diff --git a/gdb/testsuite/gdb.ada/return-small-char-array/proc.adb b/gdb/testsuite/gdb.ada/return-small-char-array/proc.adb new file mode 100644 index 0000000..b18d9fe --- /dev/null +++ b/gdb/testsuite/gdb.ada/return-small-char-array/proc.adb @@ -0,0 +1,22 @@ +-- Copyright 2025 Free Software Foundation, Inc. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 3 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License +-- along with this program. If not, see <http://www.gnu.org/licenses/>. + +with Value; +procedure Proc is + My_Value : Value.T := "abcd"; +begin + null; -- STOP + My_Value := Value.Name(My_Value); +end; diff --git a/gdb/testsuite/gdb.ada/return-small-char-array/value.adb b/gdb/testsuite/gdb.ada/return-small-char-array/value.adb new file mode 100644 index 0000000..2dd9faa --- /dev/null +++ b/gdb/testsuite/gdb.ada/return-small-char-array/value.adb @@ -0,0 +1,21 @@ +-- Copyright 2025 Free Software Foundation, Inc. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 3 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License +-- along with this program. If not, see <http://www.gnu.org/licenses/>. + +package body Value is + function Name (Of_Value : T) return T is + begin + return Of_Value; + end Name; +end Value; diff --git a/gdb/testsuite/gdb.ada/return-small-char-array/value.ads b/gdb/testsuite/gdb.ada/return-small-char-array/value.ads new file mode 100644 index 0000000..16b171e --- /dev/null +++ b/gdb/testsuite/gdb.ada/return-small-char-array/value.ads @@ -0,0 +1,20 @@ +-- Copyright 2025 Free Software Foundation, Inc. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 3 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License +-- along with this program. If not, see <http://www.gnu.org/licenses/>. + +package Value is + type T is new String (1 .. 4); + + function Name (Of_Value : T) return T; +end; diff --git a/gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp b/gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp index 08d73d8..b11efa7 100644 --- a/gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp +++ b/gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp @@ -19,6 +19,7 @@ # instructions. require is_x86_64_m64_target have_avx +require support_displaced_stepping standard_testfile .S diff --git a/gdb/testsuite/gdb.arch/amd64-disp-step-self-call-alarm.c b/gdb/testsuite/gdb.arch/amd64-disp-step-self-call-alarm.c index 03b868c..0fb2904 100644 --- a/gdb/testsuite/gdb.arch/amd64-disp-step-self-call-alarm.c +++ b/gdb/testsuite/gdb.arch/amd64-disp-step-self-call-alarm.c @@ -16,9 +16,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <unistd.h> +#include <stdlib.h> + +extern void test_call (void); + +void +unreachable (void) +{ + abort (); +} void setup_alarm (void) { alarm (300); } + +int +main () +{ + setup_alarm (); + test_call (); + unreachable (); + return 0; +} diff --git a/gdb/testsuite/gdb.arch/amd64-disp-step-self-call.S b/gdb/testsuite/gdb.arch/amd64-disp-step-self-call.S index 78a6859..20a8eb7 100644 --- a/gdb/testsuite/gdb.arch/amd64-disp-step-self-call.S +++ b/gdb/testsuite/gdb.arch/amd64-disp-step-self-call.S @@ -18,33 +18,12 @@ handling. */ .text - - .global main -main: - nop - - callq setup_alarm - - nop - -/***********************************************/ - -/* test call/ret */ - .global test_call test_call: call test_call - nop + call unreachable .global test_ret_end test_ret_end: nop -/***********************************************/ - -/* all done */ - -done: - mov $0,%rdi - call exit - hlt .section .note.GNU-stack,"",@progbits diff --git a/gdb/testsuite/gdb.arch/amd64-watchpoint-downgrade.exp b/gdb/testsuite/gdb.arch/amd64-watchpoint-downgrade.exp index dcee040..5663b0d 100644 --- a/gdb/testsuite/gdb.arch/amd64-watchpoint-downgrade.exp +++ b/gdb/testsuite/gdb.arch/amd64-watchpoint-downgrade.exp @@ -58,7 +58,7 @@ gdb_test "starti" \ [multi_line \ "warning: watchpoint $num downgraded to software watchpoint" \ "" \ - "Program stopped\\." \ + "(Program|Thread \[^\r\n\]) stopped\\." \ ".*"] # Watchpoint should now have downgraded to a s/w watchpoint. diff --git a/gdb/testsuite/gdb.arch/i386-disp-step-self-call-alarm.c b/gdb/testsuite/gdb.arch/i386-disp-step-self-call-alarm.c index 03b868c..0fb2904 100644 --- a/gdb/testsuite/gdb.arch/i386-disp-step-self-call-alarm.c +++ b/gdb/testsuite/gdb.arch/i386-disp-step-self-call-alarm.c @@ -16,9 +16,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <unistd.h> +#include <stdlib.h> + +extern void test_call (void); + +void +unreachable (void) +{ + abort (); +} void setup_alarm (void) { alarm (300); } + +int +main () +{ + setup_alarm (); + test_call (); + unreachable (); + return 0; +} diff --git a/gdb/testsuite/gdb.arch/i386-disp-step-self-call.S b/gdb/testsuite/gdb.arch/i386-disp-step-self-call.S index 466e50c..20a8eb7 100644 --- a/gdb/testsuite/gdb.arch/i386-disp-step-self-call.S +++ b/gdb/testsuite/gdb.arch/i386-disp-step-self-call.S @@ -18,33 +18,12 @@ handling. */ .text - - .global main -main: - nop - - call setup_alarm - - nop - -/***********************************************/ - -/* test call/ret */ - .global test_call test_call: call test_call - nop + call unreachable .global test_ret_end test_ret_end: nop -/***********************************************/ - -/* all done */ - -done: - pushl $0 - call exit - hlt .section .note.GNU-stack,"",@progbits diff --git a/gdb/testsuite/gdb.arch/i386-prologue-skip-cf-protection-stackalign.c b/gdb/testsuite/gdb.arch/i386-prologue-skip-cf-protection-stackalign.c new file mode 100644 index 0000000..f55cee5 --- /dev/null +++ b/gdb/testsuite/gdb.arch/i386-prologue-skip-cf-protection-stackalign.c @@ -0,0 +1,27 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include <alloca.h> + +int +main (int argc, char **argv) +{ + volatile __attribute__ ((__aligned__ (64))) int a; + volatile char *p = (char *) alloca (argc * 12); + p[2] = 'b'; + return 1; +} diff --git a/gdb/testsuite/gdb.arch/i386-prologue-skip-cf-protection.exp b/gdb/testsuite/gdb.arch/i386-prologue-skip-cf-protection.exp index eb93127..06285ce 100644 --- a/gdb/testsuite/gdb.arch/i386-prologue-skip-cf-protection.exp +++ b/gdb/testsuite/gdb.arch/i386-prologue-skip-cf-protection.exp @@ -19,41 +19,65 @@ # This option places an `endbr32`/`endbr64` instruction at the start of # all functions, which can interfere with prologue analysis. -standard_testfile .c -set binfile ${binfile} +standard_testfile .c -stackalign.c require {is_any_target x86_64-*-* i?86-*-*} - require supports_fcf_protection -set opts {debug additional_flags=-fcf-protection=full} +# Tests if breakpoint set on main is placed past main's entry. +proc test_run {} { + # Get start address of function main. + set main_addr [get_integer_valueof &main -1] + gdb_assert {$main_addr != -1} -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $opts] != "" } { - untested "failed to compile" - return -} + set bp_addr -1 -clean_restart ${binfile} + # Put breakpoint on main, get the address where the breakpoint was installed. + gdb_test_multiple "break -q main" "break on main, get address" { + -re -wrap "Breakpoint $::decimal at ($::hex).*" { + set bp_addr $expect_out(1,string) -# Get start address of function main. -set main_addr [get_integer_valueof &main -1] -gdb_assert {$main_addr != -1} + # Convert to decimal. + set bp_addr [expr $bp_addr] -set bp_addr -1 + pass $gdb_test_name + } + } -# Put breakpoint on main, get the address where the breakpoint was installed. -gdb_test_multiple "break -q main" "break on main, get address" { - -re -wrap "Breakpoint $decimal at ($hex).*" { - set bp_addr $expect_out(1,string) + # Make sure some prologue was skipped. + gdb_assert {$bp_addr != -1 && $bp_addr > $main_addr} \ + "breakpoint placed past main's entry" +} - # Convert to decimal. - set bp_addr [expr $bp_addr] +with_test_prefix "skip-cf-protection" { + set opts {debug additional_flags=-fcf-protection=full} - pass $gdb_test_name + if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable \ + $opts] != "" } { + untested "failed to compile" + return } + + clean_restart ${binfile} + + test_run } -if { $bp_addr != -1 } { - # Make sure some prologue was skipped. - gdb_assert {$bp_addr > $main_addr} +# Now, make sure that the prologue analysis does not end up at function's entry +# when stack alignment sequence is generated right after 'endbr64'/'endbr32'. +# That could happen if GDB handled those incorrectly - there was a bug that +# checked for those two in incorrect order, which caused such issue. +with_test_prefix "skip-cf-protection-stackalign" { + # gcc is easier to make it produce the sequence of interest. + if { ![is_c_compiler_gcc] } { + unsupported "stackalign test part requires gcc compiler" + return + } + + if { [prepare_for_testing "failed to prepare" "${testfile}-stackalign" \ + $srcfile2 [list optimize=-O0 additional_flags=-fcf-protection=full]] } { + return + } + + test_run } diff --git a/gdb/testsuite/gdb.base/attach-deleted-exec.exp b/gdb/testsuite/gdb.base/attach-deleted-exec.exp index 82a7bb4..45fac0d 100644 --- a/gdb/testsuite/gdb.base/attach-deleted-exec.exp +++ b/gdb/testsuite/gdb.base/attach-deleted-exec.exp @@ -67,5 +67,49 @@ if { [regexp $re_nfs $filename] } { gdb_assert { [string equal $filename /proc/${testpid}/exe] } $test } +# Restart GDB. +clean_restart + +# Setup an empty sysroot. GDB will fail to find the executable within +# the sysroot. Additionally, the presence of a sysroot should prevent +# GDB from trying to load the executable from /proc/PID/exe. +set sysroot [standard_output_file "sysroot"] +gdb_test_no_output "set sysroot $sysroot" \ + "setup sysroot" + +# Attach to the inferior. GDB should complain about failing to find +# the executable. It is the name of the executable that GDB doesn't +# find that we're interesting in here. For native targets GDB should +# be looking for BINFILE, not /proc/PID/exe. +# +# For extended-remote targets things are unfortunately harder. Native +# GDB looks for BINFILE because it understands that GDB will be +# looking in the sysroot. But remote GDB doesn't know if GDB is using +# a sysroot or not. As such, gdbserver will return /proc/PID/exe if +# it knows that the file has been deleted locally. This isn't great +# if GDB then plans to look in a sysroot, but equally, if the remote +# file has been deleted, then the name GDB will return, will have had +# " (deleted" appended, so we're unlikely to get a hit in the sysroot +# either way. +if { [target_info gdb_protocol] == "extended-remote" } { + set filename_re "/proc/$testpid/exe" +} else { + set filename_re "\[^\r\n\]+/${testfile} \\(deleted\\)" +} + +verbose -log "APB: warning: No executable has been specified, and target executable $filename_re could not be found\\. Try using the \"file\" command\\." + +gdb_test "attach $testpid" \ + [multi_line \ + "Attaching to process $decimal" \ + "warning: No executable has been specified, and target executable $filename_re could not be found\\. Try using the \"file\" command\\." \ + ".*"] \ + "attach to inferior" + +# Check GDB hasn't managed to load an executable. +gdb_test "info inferior" \ + "\\*\[^)\]+\\)\\s*" \ + "confirm no executable is loaded." + # Cleanup. kill_wait_spawned_process $test_spawn_id diff --git a/gdb/testsuite/gdb.base/backtrace-through-cu-nodebug.exp b/gdb/testsuite/gdb.base/backtrace-through-cu-nodebug.exp index 53bf642..fce6d67 100644 --- a/gdb/testsuite/gdb.base/backtrace-through-cu-nodebug.exp +++ b/gdb/testsuite/gdb.base/backtrace-through-cu-nodebug.exp @@ -31,7 +31,7 @@ proc prepare_test {has_cfi} { "${objcallerfile}" \ object [list {additional_flags=-fomit-frame-pointer \ -funwind-tables -fasynchronous-unwind-tables}]] != "" } { - untested "couldn't compile with cfi" + untested "couldn't compile" return false } } else { @@ -41,7 +41,7 @@ proc prepare_test {has_cfi} { object [list {additional_flags=-fomit-frame-pointer \ -fno-unwind-tables \ -fno-asynchronous-unwind-tables}]] != "" } { - untested "couldn't compile without cfi" + untested "couldn't compile" return false } } @@ -54,15 +54,12 @@ proc prepare_test {has_cfi} { clean_restart "$binfile-${extension}" - with_test_prefix "${extension}" { - - if ![runto callback] then { - fail "has_cfi=$has_cfi: Can't run to callback" - return false - } - gdb_test_no_output "maint frame-unwinder disable ARCH" - return true + if ![runto callback] then { + fail "has_cfi=$has_cfi: Can't run to callback" + return false } + gdb_test_no_output "maint frame-unwinder disable ARCH" + return true } if {[gdb_compile "${srcdir}/${subdir}/${srcfile2}" \ @@ -72,15 +69,45 @@ if {[gdb_compile "${srcdir}/${subdir}/${srcfile2}" \ return } -if { [prepare_test false] } { - gdb_test "bt" \ +proc_with_prefix no-cfi {} { + if { ![prepare_test false] } { + return + } + + set re_msg \ + [string_list_to_regexp \ + "Required frame unwinder may have been disabled," \ + " see 'maint info frame-unwinders'"] + set hs {[^\r\n]} + set re_bt_line "#0\\s+[string_to_regexp {callback ()}] $hs+" + set re_bt_no_filters \ [multi_line \ - "\[^\r\n\]+Required frame unwinder may have been disabled, \[^\r\n\]+" \ - "#0\\s+callback \\(\\) \[^\r\n\]+"] \ - "verify unwind fail without CFI" + $re_bt_line \ + $re_msg] + gdb_test "bt -no-filters" \ + $re_bt_no_filters \ + "verify no-filters unwind fail" + + # Flush frame cache to retrigger the message. + gdb_test "maint flush register-cache" \ + [string_to_regexp "Register cache flushed."] + + # This output may occur when we run into the message while applying the + # frame filters. + set re_bt \ + [multi_line \ + $hs+$re_msg \ + $re_bt_line] + gdb_test "bt" \ + "($re_bt|$re_bt_no_filters)" \ + "verify unwind fail" } -if { [prepare_test true] } { +proc_with_prefix cfi {} { + if { ![prepare_test true] } { + return + } + if { [istarget "arm*-*-*"] } { setup_kfail backtrace/31950 *-*-* } @@ -89,6 +116,12 @@ if { [prepare_test true] } { # #1 0x00000000004004e9 in caller () # #2 0x00000000004004cd in main () at ... gdb_test "bt" \ - "#0 +callback $text\r\n#1 $text in caller $text\r\n#2 $text in main $text" \ - "Verify unwinding works based only on CFI information" + [multi_line \ + "#0 +callback $text" \ + "#1 $text in caller $text" \ + "#2 $text in main $text"] \ + "Verify unwinding works" } + +no-cfi +cfi diff --git a/gdb/testsuite/gdb.base/bp-cond-failure.exp b/gdb/testsuite/gdb.base/bp-cond-failure.exp index d645454..4d03e7b 100644 --- a/gdb/testsuite/gdb.base/bp-cond-failure.exp +++ b/gdb/testsuite/gdb.base/bp-cond-failure.exp @@ -75,7 +75,7 @@ proc run_test { cond_eval access_type bpexpr nloc } { "Error in testing condition for breakpoint ${bp_num}.2:" \ "Cannot access memory at address 0x0" \ "" \ - "Breakpoint ${bp_num}.2, foo \\(c=49 ...\\) at \[^\r\n\]+:\[0-9\]+" \ + "(Thread \[^\r\n\]+ hit )?Breakpoint ${bp_num}.2, foo \\(c=49 ...\\) at \[^\r\n\]+:\[0-9\]+" \ "${::decimal}\\s+\[^\r\n\]+ breakpoint here\\. \[^\r\n\]+"] } else { gdb_test "continue" \ @@ -84,7 +84,7 @@ proc run_test { cond_eval access_type bpexpr nloc } { "Error in testing condition for breakpoint ${bp_num}:" \ "Cannot access memory at address 0x0" \ "" \ - "Breakpoint ${bp_num}, bar \\(\\) at \[^\r\n\]+:\[0-9\]+" \ + "(Thread \[^\r\n\]+ hit )?Breakpoint ${bp_num}, bar \\(\\) at \[^\r\n\]+:\[0-9\]+" \ "${::decimal}\\s+\[^\r\n\]+ breakpoint here\\. \[^\r\n\]+"] } } diff --git a/gdb/testsuite/gdb.base/bp-permanent.c b/gdb/testsuite/gdb.base/bp-permanent.c index d586acc..72e5e8a 100644 --- a/gdb/testsuite/gdb.base/bp-permanent.c +++ b/gdb/testsuite/gdb.base/bp-permanent.c @@ -101,7 +101,7 @@ test_signal_no_handler (void) } static void -test_signal_nested_handler () +test_signal_nested_handler (int sig) { test (); } diff --git a/gdb/testsuite/gdb.base/bp-permanent.exp b/gdb/testsuite/gdb.base/bp-permanent.exp index 62ce3f6..c6c6269 100644 --- a/gdb/testsuite/gdb.base/bp-permanent.exp +++ b/gdb/testsuite/gdb.base/bp-permanent.exp @@ -134,7 +134,7 @@ proc test {always_inserted sw_watchpoint} { unsupported "failed to stop at permanent breakpoint" return } - -re "Program received signal SIGTRAP.*$gdb_prompt $" { + -re "received signal SIGTRAP.*$gdb_prompt $" { pass $test } } @@ -174,7 +174,7 @@ proc test {always_inserted sw_watchpoint} { # disabled, it should act as if we hadn't created it in the first # place. IOW, we should get a random signal, and, the breakpoint's # command should not run. - gdb_test "continue" "Program received signal SIGTRAP.*" \ + gdb_test "continue" "received signal SIGTRAP.*" \ "disabled permanent breakpoint doesn't explain stop" gdb_test "info breakpoints" \ diff --git a/gdb/testsuite/gdb.base/break-dbg.cc b/gdb/testsuite/gdb.base/break-dbg.cc new file mode 100644 index 0000000..642ded0 --- /dev/null +++ b/gdb/testsuite/gdb.base/break-dbg.cc @@ -0,0 +1,31 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +volatile int global_var = 0; + +int +foo () +{ + return global_var; +} + +int +main () +{ + int res = foo (); + return res; +} diff --git a/gdb/testsuite/gdb.base/break-dbg.exp b/gdb/testsuite/gdb.base/break-dbg.exp new file mode 100644 index 0000000..a7c7d92 --- /dev/null +++ b/gdb/testsuite/gdb.base/break-dbg.exp @@ -0,0 +1,80 @@ +# Copyright 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +# Some basic testing of 'set debug breakpoint on'. At one point a bug +# meant that some breakpoints would immediately trigger a segfault if +# GDB tried to run with breakpoint debugging turned on. +# +# Test is compiled as C++ only so 'catch catch/throw/rethrow' have a +# something to do. The original bug would trigger for any 'catch' +# style breakpoint, so C++ isn't really a hard requirement. + +standard_testfile .cc + +require allow_cplus_tests + +if { [prepare_for_testing "failed to prepare" ${testfile} ${srcfile} \ + {debug c++}] } { + return +} + +if {![runto_main]} { + return +} + +gdb_test "catch catch" "^Catchpoint $decimal \\(catch\\)" +gdb_test "catch throw" "^Catchpoint $decimal \\(throw\\)" +gdb_test "catch rethrow" "^Catchpoint $decimal \\(rethrow\\)" + +gdb_test "catch exec" "^Catchpoint $decimal \\(exec\\)" +gdb_test "catch fork" "^Catchpoint $decimal \\(fork\\)" +gdb_test "catch vfork" "^Catchpoint $decimal \\(vfork\\)" + +gdb_test "catch load" "^Catchpoint $decimal \\(load\\)" +gdb_test "catch unload" "^Catchpoint $decimal \\(unload\\)" + +gdb_test "catch signal" "^Catchpoint $decimal \\(standard signals\\)" + +set re_warning_xml_disabled \ + [string_to_regexp \ + [join \ + [list \ + "warning: Can not parse XML syscalls information;" \ + "XML support was disabled at compile time."]]] +gdb_test "catch syscall" \ + [multi_line \ + "^($re_warning_xml_disabled" \ + ")?Catchpoint $decimal [string_to_regexp {(any syscall)}]"] + +gdb_test "watch -l global_var" "\[Ww]atchpoint $decimal: -location global_var" + +gdb_test_no_output "set debug breakpoint on" + +set saw_bp_debug_line false +gdb_test_multiple "step" "" { + -re "^step\r\n" { + exp_continue + } + -re "^\\\[breakpoint\\\] \[^\r\n\]+\r\n" { + set saw_bp_debug_line true + exp_continue + } + -re "^$gdb_prompt $" { + gdb_assert { $saw_bp_debug_line } $gdb_test_name + } + -re "^\[^\r\n\]*\r\n" { + exp_continue + } +} diff --git a/gdb/testsuite/gdb.base/catch-fork-kill.exp b/gdb/testsuite/gdb.base/catch-fork-kill.exp index 0fd853b..224a8df 100644 --- a/gdb/testsuite/gdb.base/catch-fork-kill.exp +++ b/gdb/testsuite/gdb.base/catch-fork-kill.exp @@ -32,6 +32,8 @@ standard_testfile +require allow_fork_tests + # Build two programs -- one for fork, and another for vfork. set testfile_fork "${testfile}-fork" set testfile_vfork "${testfile}-vfork" diff --git a/gdb/testsuite/gdb.base/catch-fork-static.exp b/gdb/testsuite/gdb.base/catch-fork-static.exp index b171a6d..9d50d5d 100644 --- a/gdb/testsuite/gdb.base/catch-fork-static.exp +++ b/gdb/testsuite/gdb.base/catch-fork-static.exp @@ -21,9 +21,7 @@ # ld.so probes before reaching main, and ptrace flags were set then. But a # static executable would just keep running and never catch the fork. -# Until "catch fork" is implemented on other targets... -# -require {is_any_target "*-*-linux*" "*-*-openbsd*"} +require allow_fork_tests # Reusing foll-fork.c since it's a simple forking program. standard_testfile foll-fork.c diff --git a/gdb/testsuite/gdb.base/catch-signal-fork.exp b/gdb/testsuite/gdb.base/catch-signal-fork.exp index dea0cc4..2a33ee1 100644 --- a/gdb/testsuite/gdb.base/catch-signal-fork.exp +++ b/gdb/testsuite/gdb.base/catch-signal-fork.exp @@ -14,6 +14,7 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. require {!target_info exists gdb,nosignals} +require allow_fork_tests standard_testfile diff --git a/gdb/testsuite/gdb.base/color-prompt.exp b/gdb/testsuite/gdb.base/color-prompt.exp new file mode 100644 index 0000000..c037185 --- /dev/null +++ b/gdb/testsuite/gdb.base/color-prompt.exp @@ -0,0 +1,29 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Check using a prompt with color in CLI. + +# Using tuiterm requires setting TERM on host. +require {!is_remote host} + +# We use a tuiterm, which allows us to determine cursor position. +tuiterm_env +Term::clean_restart 8 80 + +# We start with an empty screen, to generate a visible prompt. +Term::gen_prompt + +set tui 0 +source $srcdir/$subdir/../gdb.tui/color-prompt.exp.tcl diff --git a/gdb/testsuite/gdb.base/command-line-input.exp b/gdb/testsuite/gdb.base/command-line-input.exp index af228dc..9760f1a 100644 --- a/gdb/testsuite/gdb.base/command-line-input.exp +++ b/gdb/testsuite/gdb.base/command-line-input.exp @@ -18,19 +18,59 @@ # Test issuing a command split in multiple lines with continuation # characters. -gdb_exit -gdb_start +clean_restart -set test "print 1\\\\n + 2" -gdb_test_multiple "print 1\\\n + 2" $test { - -re "^print 1\\\\\r\n \\+ 2\r\n\\\$$decimal = 3\r\n$gdb_prompt $" { - pass $test +set bs "\\" +set re_bs [string_to_regexp $bs] +set re_dollar [string_to_regexp $] + +set re \ + [multi_line \ + ^[string_to_regexp "print 1$bs"] \ + [string_to_regexp " + 2"] \ + "$re_dollar$decimal = 3" \ + "$gdb_prompt $"] +gdb_test_multiple "print 1$bs\n + 2" "print 1$bs${bs}n + 2" { + -re $re { + pass $gdb_test_name + } +} + +set re \ + [multi_line \ + ^[string_to_regexp "print 1$bs"] \ + "2" \ + "$re_dollar$decimal = 12" \ + "$gdb_prompt $"] +gdb_test_multiple "print 1$bs\n2" "print 1$bs${bs}n2" { + -re $re { + pass $gdb_test_name } } -set test "print 1\\\\n2" -gdb_test_multiple "print 1\\\n2" $test { - -re "^print 1\\\\\r\n2\r\n\\\$$decimal = 12\r\n$gdb_prompt $" { - pass $test +with_test_prefix "cancel multiline" { + send_gdb "print$bs\n 1" + gdb_test_multiple "" "setup" { + -re "print$re_bs\r\n 1" { + pass $gdb_test_name + } + } + + send_gdb "\003" + gdb_test_multiple "" "cancel" { + -re -wrap "" { + pass $gdb_test_name + } + } + + # Regression test for PR cli/33063. + gdb_test_multiple "print 2" "command after cancel" { + -re -wrap " = 2" { + pass $gdb_test_name + } + -re -wrap "" { + # Avoid undefined command error. + fail $gdb_test_name + } } } diff --git a/gdb/testsuite/gdb.base/corefile-shmem-zero-id-lib.c b/gdb/testsuite/gdb.base/corefile-shmem-zero-id-lib.c new file mode 100644 index 0000000..58fdec6 --- /dev/null +++ b/gdb/testsuite/gdb.base/corefile-shmem-zero-id-lib.c @@ -0,0 +1,522 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +/* This file contains a library that can be preloaded into GDB on Linux + using the LD_PRELOAD technique. + + The library intercepts calls to OPEN, CLOSE, READ, and PREAD in order to + fake the inode number of a shared memory mapping. + + When GDB creates a core file (e.g. with the 'gcore' command), then + shared memory mappings should be included in the generated core file. + + The 'id' for the shared memory mapping shares the inode slot in the + /proc/PID/smaps file, which is what GDB consults to decide which + mappings should be included in the core file. + + It is possible for a shared memory mapping to have an 'id' of zero. + + At one point there was a bug in GDB where mappings with an inode of zero + would not be included in the generated core file. This meant that most + shared memory mappings would be included in the generated core file, + but, if a shared memory mapping happened to get an 'id' of zero, then, + because this would appear as a zero inode in the smaps file, this shared + memory mapping would be excluded from the generated core file. + + This preload library spots when GDB opens a /proc/PID/smaps file and + immediately copies the contents of this file into an internal buffer. + The buffer is then scanned looking for a shared memory mapping, and, if + a shared memory mapping is found, its 'id' (in the inode position) is + changed to zero. + + Calls to read/pread are intercepted, and attempts to read from the smaps + file are then served from the modified buffer contents. + + The close calls are monitored and, when the smaps file is closed, the + internal buffer is released. + + This works with GDB (currently) because the requirements for access to + the smaps file are pretty simple. GDB opens the file and grabs the + entire contents with a single pread call and a large buffer. There's no + seeking within the file or anything like that. + + The intention is that this library is preloaded into a GDB session which + is then used to start an inferior and generate a core file. GDB will + then see the zero inode for the shared memory mapping and should, if the + bug is correctly fixed, still add the shared memory mapping to the + generated core file. */ + +#define _GNU_SOURCE + +#include <stdio.h> +#include <stdlib.h> +#include <dlfcn.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <stdarg.h> +#include <errno.h> +#include <ctype.h> +#include <string.h> +#include <stdbool.h> +#include <assert.h> + +/* Logging. */ + +static void +log_msg (const char *fmt, ...) +{ +#ifdef LOGGING + va_list ap; + + va_start (ap, fmt); + vfprintf (stderr, fmt, ap); + va_end (ap); +#endif /* LOGGING */ +} + +/* Error handling, message and exit. */ + +static void +error (const char *fmt, ...) +{ + va_list ap; + + va_start (ap, fmt); + vfprintf (stderr, fmt, ap); + va_end (ap); + + exit (EXIT_FAILURE); +} + +/* The type of the open() function. */ +typedef int (*open_func_type)(const char *pathname, int flags, ...); + +/* The type of the close() function. */ +typedef int (*close_func_type)(int fd); + +/* The type of the read() function. */ +typedef ssize_t (*read_func_type)(int fd, void *buf, size_t count); + +/* The type of the pread() function. */ +typedef ssize_t (*pread_func_type) (int fd, void *buf, size_t count, off_t offset); + +/* Structure that holds information about a /proc/PID/smaps file that has + been opened. */ +struct interesting_file +{ + /* The file descriptor for the opened file. */ + int fd; + + /* The read offset within the file. Set to zero when the file is + opened. Any 'read' calls will update this offset. */ + size_t offset; + + /* The size of the contents within the buffer. This is not the total + buffer size (which might be larger). Attempts to read beyond SIZE + indicate an attempt to read beyond the end of the file. */ + size_t size; + + /* The (possibly modified) contents of the file. */ + char *content; +}; + +/* We only track a single interesting file. Currently, for the use case + we imagine, GDB will only ever open one /proc/PID/smaps file at once. */ +struct interesting_file the_file = { -1, 0, 0, NULL }; + +/* Update the contents of the global THE_FILE buffer. It is assumed that + the file contents have already been loaded into THE_FILE's content + buffer. + + Look for any lines that represent a shared memory mapping and modify + the inode field (which holds the shared memory id) to be zero. */ +static void +update_file_content_buffer (void) +{ + assert (the_file.content != NULL); + + char *start = the_file.content; + do + { + /* Every line, even the last one, ends with a newline. */ + char *end = strchrnul (start, '\n'); + assert (end != NULL); + assert (*end != '\0'); + + /* Attribute lines start with an uppercase letter. The lines we want + to modify should start with a lower case hex character, + i.e. [0-9a-f]. Also, every line that we want to consider should + be long enough, but just in case, check the longest possible + filename that we care about. */ + if (isxdigit (*start) && (isdigit (*start) || islower (*start)) + && (end - start) > 23) + { + /* There are two possible filenames that we look for: + /SYSV%08x + /SYSV%08x (deleted) + The END pointer is pointing to the first character after the + filename. + + Setup OFFSET to be the offset from END to the start of the + filename. As we check the filename we set OFFSET to 0 if the + filename doesn't match one of the expected patterns. */ + size_t offset; + if (strncmp ((end - 13), "/SYSV", 5) == 0) + offset = 13; + else if (strncmp ((end - 23), "/SYSV", 5) == 0) + { + if (strncmp ((end - 10), " (deleted)", 10) == 0) + offset = 23; + else + offset = 0; + } + else + offset = 0; + + for (int i = 0; i < 8 && offset != 0; ++i) + { + if (!isdigit (*(end - offset + 5 + i))) + offset = 0; + } + + /* If OFFSET is non-zero then the filename on this line looks + like a shared memory mapping, and OFFSET is the offset from + END to the first character of the filename. */ + if (offset != 0) + { + log_msg ("[LD_PRELOAD] shared memory entry: %.*s\n", + offset, (end - offset)); + + /* Set PTR to the first character before the filename. This + should be a white space character. */ + char *ptr = end - offset - 1; + assert (isspace (*ptr)); + + /* Walk backwards until we find the inode field. */ + while (isspace (*ptr)) + --ptr; + + /* Now replace every character in the inode field, except the + first one, with a space character. */ + while (!isspace (*(ptr - 1))) + { + assert (isdigit (*ptr)); + *ptr = ' '; + --ptr; + } + + /* Replace the first character with '0'. */ + assert (isdigit (*ptr)); + *ptr = '0'; + + /* This print is checked for from GDB. */ + printf ("[LD_PRELOAD] updated a shared memory mapping\n"); + } + } + + /* Update START to point to the next line. The last line of the + file will be empty. */ + assert (*end == '\n'); + start = end; + while (*start == '\n') + ++start; + } + while (*start != '\0'); +} + +/* Return true if PATHNAME has for form "/proc/PID/smaps" (without the + quotes). Otherwise, return false. */ + +static bool +is_smaps_file (const char *pathname) +{ + if (strncmp (pathname, "/proc/", 6) == 0) + { + int idx = 6; + while (isdigit (pathname[idx])) + idx++; + if (idx > 6 && strcmp (&pathname[idx], "/smaps") == 0) + return true; + } + + return false; +} + +/* Return true if PATHNAME should be considered interesting. PATHNAME is + interesting if it has the form /proc/PID/smaps, and there is no + interesting file already opened. */ + +static bool +is_interesting_pathname (const char *pathname) +{ + return the_file.fd == -1 && is_smaps_file (pathname); +} + +/* Read the contents of an interesting file from FD (and open file + descriptor) into the global THE_FILE variable, making the file FD the + current interesting file. There should be no already open interesting + file when this function is called. + + The contents of the file FD are read into a memory buffer and updated so + that any shared memory mappings listed within FD (which will be an smaps + file) will have the id zero. */ + +static void +read_interesting_file_contents (int fd) +{ +#define BLOCK_SIZE 1024 + /* Slurp contents into a local buffer. */ + size_t buffer_size = 1024; + size_t offset = 0; + + assert (the_file.size == 0); + assert (the_file.content == NULL); + assert (the_file.fd == -1); + assert (the_file.offset == 0); + + do + { + the_file.content = (char *) realloc (the_file.content, buffer_size); + if (the_file.content == NULL) + error ("[LD_PRELOAD] Failed allocating memory: %s\n", strerror (errno)); + + ssize_t bytes_read = read (fd, the_file.content + offset, BLOCK_SIZE); + if (bytes_read == -1) + error ("[LD_PRELOAD] Failed reading file: %s\n", strerror (errno)); + + the_file.size += bytes_read; + + if (bytes_read < BLOCK_SIZE) + break; + + offset += BLOCK_SIZE; + buffer_size += BLOCK_SIZE; + } + while (true); + + /* Add a null terminator. This makes the update easier. We know + there will be space because we only break out of the loop above + when the last read returns less than BLOCK_SIZE bytes. This means + we allocated an extra BLOCK_SIZE bytes, but didn't fill them all. + This means there must be at least 1 byte available for the null. */ + the_file.content[the_file.size] = '\0'; + + /* Reset the seek pointer. */ + if (lseek (fd, 0, SEEK_SET) == (off_t) -1) + error ("[LD_PRELOAD] Failed to lseek in file: %s\n", strerror (errno)); + + /* Record the file descriptor, this is used in read, pread, and close + in order to spot when we need to intercept the call. */ + the_file.fd = fd; + + update_file_content_buffer (); +#undef BLOCK_SIZE +} + +/* Intercept calls to 'open'. If this is an attempt to open a + /proc/PID/smaps file then intercept it, load the file contents into a + buffer and update the file contents. For all other open requests, just + forward to the real open function. */ +int +open (const char *pathname, int flags, ...) +{ + /* Pointer to the real open function. */ + static open_func_type real_open = NULL; + + /* Mode is only used if the O_CREAT flag is set in FLAGS. */ + mode_t mode = 0; + + /* Set true if this is a /proc/PID/smaps file. */ + bool is_interesting = is_interesting_pathname (pathname); + + /* Check if O_CREAT is in flags. If it is, get the mode. */ + if (flags & O_CREAT) + { + va_list args; + va_start (args, flags); + mode = va_arg (args, mode_t); + va_end (args); + } + + /* Debug. */ + if (is_interesting) + log_msg ("[LD_PRELOAD] Opening file: %s\n", pathname); + + /* Make sure we have a pointer to the real open() function. */ + if (real_open == NULL) + { + /* Get the address of the real open() function. */ + real_open = (open_func_type) dlsym (RTLD_NEXT, "open"); + if (real_open == NULL) + error ("[LD_PRELOAD] dlsym() error for 'open': %s\n", dlerror ()); + } + + /* Call the original open() function with the provided arguments. */ + int res = -1; + if (flags & O_CREAT) + res = real_open (pathname, flags, mode); + else + res = real_open (pathname, flags); + + if (res != -1 && is_interesting) + read_interesting_file_contents (res); + + return res; +} + +/* Like above, but for open64. */ + +int +open64 (const char *pathname, int flags, ...) +{ + /* Pointer to the real open64 function. */ + static open_func_type real_open64 = NULL; + + /* Mode is only used if the O_CREAT flag is set in FLAGS. */ + mode_t mode = 0; + + /* Set true if this is a /proc/PID/smaps file. */ + bool is_interesting = is_interesting_pathname (pathname); + + /* Check if O_CREAT is in flags. If it is, get the mode. */ + if (flags & O_CREAT) + { + va_list args; + va_start (args, flags); + mode = va_arg (args, mode_t); + va_end (args); + } + + /* Debug. */ + if (is_interesting) + log_msg ("[LD_PRELOAD] Opening file: %s\n", pathname); + + /* Make sure we have a pointer to the real open64() function. */ + if (real_open64 == NULL) + { + /* Get the address of the real open64() function. */ + real_open64 = (open_func_type) dlsym (RTLD_NEXT, "open64"); + if (real_open64 == NULL) + error ("[LD_PRELOAD] dlsym() error for 'open64': %s\n", dlerror ()); + } + + /* Call the original open64() function with the provided arguments. */ + int res = -1; + if (flags & O_CREAT) + res = real_open64 (pathname, flags, mode); + else + res = real_open64 (pathname, flags); + + if (res != -1 && is_interesting) + read_interesting_file_contents (res); + + return res; +} + +/* Intercept the 'close' function. If this is a previously opened + interesting file then clean up. Otherwise, forward to the normal close + function. */ +int +close (int fd) +{ + static close_func_type real_close = NULL; + + if (fd == the_file.fd) + { + the_file.fd = -1; + free (the_file.content); + the_file.content = NULL; + the_file.offset = 0; + the_file.size = 0; + log_msg ("[LD_PRELOAD] Closing file.\n"); + } + + /* Make sure we have a pointer to the real open() function. */ + if (real_close == NULL) + { + /* Get the address of the real open() function. */ + real_close = (close_func_type) dlsym (RTLD_NEXT, "close"); + if (real_close == NULL) + error ("[LD_PRELOAD] dlsym() error for 'close': %s\n", dlerror ()); + } + + return real_close (fd); +} + +/* Intercept 'pread' calls. If this is a pread from a previously opened + interesting file, then read from the in memory buffer. Otherwise, + forward to the real pread function. */ +ssize_t +pread (int fd, void *buf, size_t count, off_t offset) +{ + static pread_func_type real_pread = NULL; + + if (fd == the_file.fd) + { + size_t max; + + if (offset > the_file.size) + max = 0; + else + max = the_file.size - offset; + if (count > max) + count = max; + + memcpy (buf, the_file.content + offset, count); + log_msg ("[LD_PRELOAD] Read from file.\n"); + return count; + } + + if (real_pread == NULL) + { + /* Get the address of the real read() function. */ + real_pread = (pread_func_type) dlsym (RTLD_NEXT, "pread"); + if (real_pread == NULL) + error ("[LD_PRELOAD] dlsym() error for 'pread': %s\n", dlerror ()); + } + + return real_pread (fd, buf, count, offset); +} + +/* Intercept 'read' calls. If this is a read from a previously opened + interesting file, then read from the in memory buffer. Otherwise, + forward to the real read function. */ +ssize_t +read (int fd, void *buf, size_t count) +{ + static read_func_type real_read = NULL; + + if (fd == the_file.fd) + { + ssize_t bytes_read = pread (fd, buf, count, the_file.offset); + if (bytes_read > 0) + the_file.offset += bytes_read; + return bytes_read; + } + + if (real_read == NULL) + { + /* Get the address of the real read() function. */ + real_read = (read_func_type) dlsym (RTLD_NEXT, "read"); + if (real_read == NULL) + error ("[LD_PRELOAD] dlsym() error for 'read': %s\n", dlerror ()); + } + + return real_read (fd, buf, count); +} diff --git a/gdb/testsuite/gdb.base/corefile-shmem-zero-id.c b/gdb/testsuite/gdb.base/corefile-shmem-zero-id.c new file mode 100644 index 0000000..92d2edf --- /dev/null +++ b/gdb/testsuite/gdb.base/corefile-shmem-zero-id.c @@ -0,0 +1,63 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include <sys/ipc.h> +#include <sys/shm.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <unistd.h> +#include <assert.h> +#include <time.h> + +void +breakpt (void) +{ + /* Nothing. */ +} + +int +main (void) +{ + /* Create a shared memory mapping. */ + int sid = shmget (IPC_PRIVATE, 0x1000, IPC_CREAT | IPC_EXCL | 0777); + if (sid == -1) + { + perror ("shmget"); + exit (1); + } + + /* Attach the shared memory mapping. */ + void *addr = shmat (sid, NULL, SHM_RND); + if (addr == (void *) -1L) + { + perror ("shmat"); + exit (1); + } + + breakpt (); + + /* Mark the shared memory mapping as deleted -- once the last user + has finished with it. */ + if (shmctl (sid, IPC_RMID, NULL) != 0) + { + perror ("shmctl"); + exit (1); + } + + return 0; +} diff --git a/gdb/testsuite/gdb.base/corefile-shmem-zero-id.exp b/gdb/testsuite/gdb.base/corefile-shmem-zero-id.exp new file mode 100644 index 0000000..57c665e --- /dev/null +++ b/gdb/testsuite/gdb.base/corefile-shmem-zero-id.exp @@ -0,0 +1,228 @@ +# Copyright 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# This test script tries to check GDB's ability to create a core file +# (e.g. with 'gcore' command) when there's a shared memory mapping +# with the id zero. +# +# Testing this case is hard. Older kernels don't even seem to give +# out the shared memory id zero. And on new kernels you still cannot +# guarantee to grab the zero id for testing; the id might be in use by +# some other process, or the kernel might just not give out that id +# for some other reason. +# +# To figure out which mappings to include in the core file, GDB reads +# the /proc/PID/smaps file. There is a field in this file which for +# file backed mappings, holds the inode of the file. But for shared +# memory mappings this field holds the shared memory id. The problem +# was that GDB would ignore any entry in /proc/PID/smaps with an inode +# entry of zero, which would catch the shared memory mapping with a +# zero id. +# +# There was an attempt to write a test which spammed out requests for +# shared memory mappings and tried to find the one with id zero, but +# this was still really unreliable. +# +# This test takes a different approach. We compile a library which we +# preload into the GDB process. This library intercepts calls to +# open, close, read, and pread, and watches for an attempt to open the +# /proc/PID/smaps file. +# +# When we see that file being opened, we copy the file contents into a +# memory buffer and modify the buffer so that the inode field for any +# shared memory mappings is set to zero. We then intercept calls to +# read and pread and return results from that in memory buffer. +# +# The test executable itself create a shared memory mapping (which +# might have any id). +# +# GDB, with the pre-load library in place, start the inferior and then +# uses the 'gcore' command to dump a core file. When GDB opens the +# smaps file and reads from it, the preload library ensures that GDB +# sees an inode of zero. +# + +# This test only works on Linux +require isnative +require {!is_remote host} +require {!is_remote target} +require {istarget *-linux*} +require gcore_cmd_available + +standard_testfile .c -lib.c + +set libfile ${testfile}-lib +set libobj [standard_output_file ${libfile}.so] + +# Compile the preload library. We only get away with this as we +# limit this test to running when ISNATIVE is true. +if { [build_executable "build preload lib" $libobj $srcfile2 \ + {debug shlib libs=-ldl}] == -1 } { + return +} + +# Now compile the inferior executable. +if {[build_executable "build executable" $testfile $srcfile] == -1} { + return +} + +# Spawn GDB with LIBOBJ preloaded using LD_PRELOAD. +save_vars { env(LD_PRELOAD) env(ASAN_OPTIONS) } { + if { ![info exists env(LD_PRELOAD) ] + || $env(LD_PRELOAD) == "" } { + set env(LD_PRELOAD) "$libobj" + } else { + append env(LD_PRELOAD) ":$libobj" + } + + # Prevent address sanitizer error: + # ASan runtime does not come first in initial library list; you should + # either link runtime to your application or manually preload it with + # LD_PRELOAD. + append_environment_default ASAN_OPTIONS verify_asan_link_order 0 + + clean_restart $binfile + + # Start GDB with the modified environment, this means that, when + # using remote targets, gdbserver will also use the preload + # library. + if {![runto_main]} { + return + } +} + +gdb_breakpoint breakpt +gdb_continue_to_breakpoint "run to breakpt" + +# Check the /proc/PID/smaps file itself. The call to 'cat' should +# inherit the preload library, so should see the modified file +# contents. Check that the shared memory mapping line has an id of +# zero. This confirms that the preload library is working. If the +# preload library breaks then we'll start seeing non-zero shared +# memory ids, which always worked, so we'd never know that this test +# is broken! +# +# This check ensures the test is working as expected. +set shmem_line_count 0 +set fixup_line_count 0 +set inf_pid [get_inferior_pid] +gdb_test_multiple "shell cat /proc/${inf_pid}/smaps" "check smaps" { + -re "^\\\[LD_PRELOAD\\\] updated a shared memory mapping\r\n" { + incr fixup_line_count + exp_continue + } + -re "^\[^\r\n\]+($decimal)\\s+/SYSV\[0-9\]{8}(?: \\(deleted\\))?\r\n" { + set id $expect_out(1,string) + if { $id == 0 } { + incr shmem_line_count + } + exp_continue + } + -re "^$gdb_prompt $" { + with_test_prefix $gdb_test_name { + gdb_assert { $shmem_line_count == 1 } \ + "single shared memory mapping found" + gdb_assert { $fixup_line_count == 1 } \ + "single fixup line found" + } + } + -re "^\[^\r\n\]+\r\n" { + exp_continue + } +} + +# Now generate a core file. This will use the preload library to read +# the smaps file. The code below is copied from 'proc gdb_gcore_cmd', +# but we don't use that as we also look for a message that is printed +# by the LD_PRELOAD library. This is an extra level of check that the +# preload library is triggering when needed. +set corefile [standard_output_file ${testfile}.core] +set saw_ld_preload_msg false +set saw_saved_msg false +with_timeout_factor 3 { + gdb_test_multiple "gcore $corefile" "save core file" { + -re "^\\\[LD_PRELOAD\\\] updated a shared memory mapping\r\n" { + # GDB actually reads the smaps file multiple times when + # creating a core file, so we'll see multiple of these + # fixup lines. + set saw_ld_preload_msg true + exp_continue + } + -re "^Saved corefile \[^\r\n\]+\r\n" { + set saw_saved_msg true + exp_continue + } + -re "^$gdb_prompt $" { + with_test_prefix $gdb_test_name { + gdb_assert { $saw_saved_msg } \ + "saw 'Saved corefile' message" + + # If we're using a remote target then the message from + # the preload library will go to gdbservers stdout, + # not GDB's, so don't check for it. + if { [gdb_protocol_is_native] } { + gdb_assert { $saw_ld_preload_msg } \ + "saw LD_PRELOAD message from library" + } + } + } + -re "^\[^\r\n\]*\r\n" { + exp_continue + } + } +} + +# Restart GDB. This time we are _not_ using the preload library. We +# no longer need it as we are only analysing the core file now. +clean_restart $binfile + +# Load the core file. +gdb_test "core-file $corefile" \ + "Program terminated with signal SIGTRAP, Trace/breakpoint trap\\..*" \ + "load core file" + +# Look through the mappings. We _should_ see the shared memory +# mapping. We _should_not_ see any of the special '[blah]' style +# mappings, e.g. [vdso], [vstack], [vsyscalls], etc. +set saw_special_mapping false +set saw_shmem_mapping false +gdb_test_multiple "info proc mappings" "" { + -re "\r\nStart Addr\[^\r\n\]+File\\s*\r\n" { + exp_continue + } + + -re "^$hex\\s+$hex\\s+$hex\\s+$hex\\s+\\\[\\S+\\\]\\s*\r\n" { + set saw_special_mapping true + exp_continue + } + + -re "^$hex\\s+$hex\\s+$hex\\s+$hex\\s+/SYSV\[0-9\]+ \\(deleted\\)\\s*\r\n" { + set saw_shmem_mapping true + exp_continue + } + + -re "^$hex\\s+$hex\\s+$hex\\s+$hex\[^\r\n\]*\r\n" { + exp_continue + } + + -re "^$gdb_prompt $" { + with_test_prefix $gdb_test_name { + gdb_assert { $saw_shmem_mapping } \ + "check shared memory mapping exists" + gdb_assert { !$saw_special_mapping } \ + "check no special mappings added" + } + } +} diff --git a/gdb/testsuite/gdb.base/default.exp b/gdb/testsuite/gdb.base/default.exp index 3abd049..d857165 100644 --- a/gdb/testsuite/gdb.base/default.exp +++ b/gdb/testsuite/gdb.base/default.exp @@ -253,10 +253,39 @@ gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- User-d gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- User-defined aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." #test handle gdb_test "handle" "Argument required .signal to handle.*" -#test info "i" abbreviation -gdb_test "i" "List of \"info\" subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation" + +proc test_info_command { command message } { + set saw_info_header 0 + set saw_help_info 0 + set saw_command_abbrev 0 + gdb_test_multiple $command $message -lbl { + -re "\r\nList of \"info\" subcommands:" { + verbose "Info header displayed" + set saw_info_header 1 + exp_continue + } + -re "Type \"help info\" followed by subcommand name for full documentation\\." { + verbose "Help info displayed" + set saw_help_info 1 + exp_continue + } + -re "\r\nCommand name abbreviations are allowed if unambiguous\\." { + verbose "Command name abbreviations displayed" + set saw_command_abbrev 1 + exp_continue + } + -re -wrap "" { + gdb_assert { $saw_info_header && $saw_help_info + && $saw_command_abbrev } $gdb_test_name + } + } +} + +#test info "i" abbreviation +test_info_command "i" "info \"i\" abbreviation" #test info -gdb_test "info" "List of \"info\" subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." +test_info_command "info" "info" + #test ignore gdb_test "ignore" "Argument required .a breakpoint number.*" #test info address @@ -379,38 +408,52 @@ gdb_test "info registers" "The program has no registers now." gdb_test "info s" "No stack." "info stack \"s\" abbreviation" #test info stack gdb_test "info stack" "No stack." -#test info set -# Test improved to check three parts: -# 1) confirm -# 2) prompt -# 3) write -# And only succeed if all three are matched. -# This should fix an old problem on native solaris 2.8, -# where this test fails due to this line: + +#test "info set" and "show" commands +# The test needs to match the "prompt: ..." part to fix an old problem on native +# Solaris 2.8, where this test fails due to this line: # prompt: Gdb's prompt is "(gdb) ".^M -set set_confirm_seen 0 -set set_prompt_seen 0 -gdb_test_multiple "info set" "info set" { - -re "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename: The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize: Number of source lines gdb will list by default is 10" { - verbose "Confirm dislayed" - set set_confirm_seen 1 - exp_continue - } - -re "Gdb's prompt is \"$gdb_prompt \"" { - verbose "GDB prompt displayed" - set set_prompt_seen 1 - exp_continue - } - -re "Writing into executable.*$gdb_prompt $" { - verbose "write displayed" - if { $set_prompt_seen && $set_confirm_seen } { - pass "info set" - } else { - verbose "prompt $set_prompt_seen confirm $set_confirm_seen" - fail "info set (incomplete output)" +proc test_info_set_show { command } { + set set_confirm_seen 0 + set set_history_filename_seen 0 + set set_listsize_seen 0 + set set_prompt_seen 0 + set set_write_seen 0 + gdb_test_multiple $command $command -lbl { + -re "\r\nconfirm: Whether to confirm potentially dangerous operations is o\[a-z\]+\\." { + verbose "Confirm displayed" + set set_confirm_seen 1 + exp_continue + } + -re "\r\nhistory filename: The filename in which to record the command history is \[^\r\n\]+\\." { + verbose "History filename displayed" + set set_history_filename_seen 1 + exp_continue + } + -re "\r\nlistsize: Number of source lines gdb will list by default is 10\\." { + verbose "Listsize displayed" + set set_listsize_seen 1 + exp_continue + } + -re "\r\nprompt: Gdb's prompt is \"$::gdb_prompt \"" { + verbose "GDB prompt displayed" + set set_prompt_seen 1 + exp_continue + } + -re "write: Writing into executable and core files is o\[a-z\]+\\." { + verbose "Write displayed" + set set_write_seen 1 + exp_continue + } + -re -wrap "" { + gdb_assert { $set_confirm_seen && $set_history_filename_seen + && $set_listsize_seen && $set_prompt_seen + && $set_write_seen } $gdb_test_name } } } +test_info_set_show "info set" + gdb_test "info symbol" "Argument required .address.." #test info source gdb_test "info source" "No current source file..*" @@ -591,12 +634,41 @@ gdb_test "set history" "List of \"set history\" subcommands:(\[^\r\n\]*\[\r\n\]) gdb_test "set language" "Requires an argument. Valid arguments are auto, local, unknown, ada, asm, c, c.., d, fortran, go, minimal, modula-2, objective-c, opencl, pascal, rust." #test set listsize gdb_test "set listsize" "Argument required .integer to set it to.*" + +proc test_set_print { command message } { + set saw_info_header 0 + set saw_help_info 0 + set saw_command_abbrev 0 + gdb_test_multiple $command $message -lbl { + -re "\r\nList of \"set print\" subcommands:" { + verbose "Info header displayed" + set saw_info_header 1 + exp_continue + } + -re "Type \"help set print\" followed by subcommand name for full documentation\\." { + verbose "Help info displayed" + set saw_help_info 1 + exp_continue + } + -re "\r\nCommand name abbreviations are allowed if unambiguous\\." { + verbose "Command name abbreviations displayed" + set saw_command_abbrev 1 + exp_continue + } + -re -wrap "" { + gdb_assert { $saw_info_header && $saw_help_info + && $saw_command_abbrev } $gdb_test_name + } + } +} + #test set print "p" abbreviation -gdb_test "set p" "List of \"set print\" subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation" +test_set_print "set p" "set print \"p\" abbreviation" #test set print "pr" abbreviation -gdb_test "set pr" "List of \"set print\" subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation" +test_set_print "set pr" "set print \"pr\" abbreviation" #test set print -gdb_test "set print" "List of \"set print\" subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." +test_set_print "set print" "set print" + #test set print address gdb_test_no_output "set print address" "set print address" #test set print array @@ -687,7 +759,6 @@ set show_conv_list \ {$_probe_arg10 = <error: No frame selected>} \ {$_probe_arg11 = <error: No frame selected>} \ {$_cimag = <internal function _cimag>} \ - {$_colorsupport = "monochrome"} \ {$_creal = <internal function _creal>} \ {$_isvoid = <internal function _isvoid>} \ {$_shell = <internal function _shell>} \ @@ -695,12 +766,10 @@ set show_conv_list \ {$_gdb_maint_setting = <internal function _gdb_maint_setting>} \ {$_gdb_setting_str = <internal function _gdb_setting_str>} \ {$_gdb_setting = <internal function _gdb_setting>} \ - {$_gdb_major = 17} \ - {$_gdb_minor = 1} \ {$_shell_exitsignal = void} \ {$_shell_exitcode = 0} \ {$_active_linker_namespaces = 1} \ - {$_current_linker_namespace = <error: No registers.>}\ + {$_linker_namespace = <error: No registers.>}\ } if [allow_python_tests] { append show_conv_list \ @@ -716,10 +785,52 @@ if [allow_python_tests] { {$_any_caller_matches = <internal function _any_caller_matches>} \ } } -gdb_test_list_exact "show convenience" "show convenience" \ - "\[^\r\n\]+\[\r\n\]+" \ - "\[^\r\n\]+" \ - $show_conv_list + +set lines [gdb_get_lines_no_pass "show convenience"] +set matches 0 +set all_found 1 +foreach s $show_conv_list { + if {  $lines] } { + verbose -log "didn't match: '$s'" + set all_found 0 + break + } + incr matches +} + +set re_var [string_to_regexp {$_colorsupport}] +if { [is_remote host] } { + set re_val {[^\r\n]+} +} else { + set re_val [string_to_regexp {"monochrome"}] +} +if { [regexp "$re_var = $re_val" $lines] } { + incr matches +} else { + set all_found 0 +} + +set re_vars \ + [list \ + [string_to_regexp {$_gdb_major}] \ + [string_to_regexp {$_gdb_minor}]] +foreach re_var $re_vars { + if { [regexp "$re_var = $decimal" $lines] } { + incr matches + } else { + set all_found 0 + } +} + +if { [regexp [string_to_regexp {$_tlb = void}] $lines] } { + incr matches +} else { + # Convenience variable _tlb is added only if support for windows targets + # is enabled. Don't complain if it's missing. +} + +gdb_assert { $all_found && $matches == [count_newlines $lines] } \ + "show convenience" #test show directories gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" @@ -741,12 +852,47 @@ gdb_test "show history" "history expansion: *History expansion on command input gdb_test "show language" "The current source language is \"auto; currently c\"." #test show listsize gdb_test "show listsize" "Number of source lines gdb will list by default is 10." + +proc test_show_print { command } { + set saw_print_address 0 + set saw_print_frame_args 0 + set saw_print_symbol 0 + set saw_print_vtbl 0 + gdb_test_multiple $command $command -lbl { + -re "\r\nprint address: Printing of addresses is o\[a-z\]+\\." { + verbose "Print address displayed" + set saw_print_address 1 + exp_continue + } + -re "\r\nprint frame-arguments: Printing of non-scalar frame arguments is \[^\r\n\]+\\." { + verbose "Print frame-arguments displayed" + set saw_print_frame_args 1 + exp_continue + } + -re "\r\nprint symbol: Printing of symbols when printing pointers is o\[a-z\]+\\." { + verbose "Print symbol displayed" + set saw_print_symbol 1 + exp_continue + } + -re "\r\nprint vtbl: Printing of C\\+\\+ virtual function tables is o\[a-z\]+\\." { + verbose "Print vtbl displayed" + set saw_print_vtbl 1 + exp_continue + } + -re -wrap "" { + gdb_assert { $saw_print_address && $saw_print_frame_args + && $saw_print_symbol && $saw_print_vtbl } $gdb_test_name + } + } +} + #test show print "p" abbreviation -gdb_test "show p" ".*" +test_show_print "show p" #test show print "pr" abbreviation -gdb_test "show pr" ".*" +test_show_print "show pr" #test show print -gdb_test "show print" ".*" +test_show_print "show print" + #test show paths gdb_test "show paths" "Executable and object file path:.*" #test show print address @@ -792,30 +938,10 @@ gdb_test "show width" "Number of characters gdb thinks are in a line is.*" #test show write # This is only supported on targets which use exec.o. gdb_test "show write" "Writing into executable and core files is o.*" + #test show -set show_confirm_seen 0 -set show_prompt_seen 0 -gdb_test_multiple "show" "show" { - -re "confirm: *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size: *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize: *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements: *Limit on string chars or array elements to print is 200." { - verbose "Confirm displayed" - set show_confirm_seen 1 - exp_continue - } - -re "Gdb's prompt is \"$gdb_prompt \"" { - verbose "GDB prompt displayed" - set show_prompt_seen 1 - exp_continue - } - -re "Writing into executable.*$gdb_prompt $" { - verbose "write displayed" - if { $show_prompt_seen && $show_confirm_seen } { - pass "show" - } else { - verbose "prompt $show_prompt_seen confirm $show_confirm_seen" - fail "show (incomplete output)" - } - } -} +test_info_set_show "show" + #history saving should stay disabled gdb_test_no_output "set history save off" "set history save off" #test stepi "si" abbreviation diff --git a/gdb/testsuite/gdb.base/dlmopen-ns-ids.exp b/gdb/testsuite/gdb.base/dlmopen-ns-ids.exp index 8f52199..4d3e8eb 100644 --- a/gdb/testsuite/gdb.base/dlmopen-ns-ids.exp +++ b/gdb/testsuite/gdb.base/dlmopen-ns-ids.exp @@ -112,7 +112,7 @@ proc_with_prefix test_conv_vars {} { gdb_test "print \$_active_linker_namespaces" "1" \ "1 namespace before starting inferior" - gdb_test "print \$_current_linker_namespace" "No registers." \ + gdb_test "print \$_linker_namespace" "No registers." \ "No current namespace before starting inferior" if { ![runto_main] } { @@ -121,7 +121,7 @@ proc_with_prefix test_conv_vars {} { gdb_test "print \$_active_linker_namespaces" "1" \ "Before activating namespaces" - gdb_test "print \$_current_linker_namespace" ".*\"\\\[\\\[0\\\]\\\]\"" \ + gdb_test "print \$_linker_namespace" ".* = 0" \ "Still in the default namespace" gdb_breakpoint "inc" allow-pending @@ -130,10 +130,16 @@ proc_with_prefix test_conv_vars {} { foreach_with_prefix dl {3 2 1} { gdb_continue_to_breakpoint "inc" - gdb_test "print \$_current_linker_namespace" ".*\"\\\[\\\[$dl\\\]\\\]\"" \ + gdb_test "print \$_linker_namespace" ".* = $dl" \ "Verify we're in namespace $dl" } + # Check that we display the namespace of the selected + # frame, not the lowermost one. + gdb_test "up" "\#1.*in main.*" + gdb_test "print \$_linker_namespace" ".* = 0" \ + "print namespace of selected frame" + gdb_continue_to_breakpoint "first dlclose" gdb_test "print \$_active_linker_namespaces" "4" "all SOs loaded" @@ -154,7 +160,7 @@ proc_with_prefix test_conv_vars {} { # breakpoints and pending breakpoints at the same time with # gdb_breakpoint. gdb_test "next" ".*assert.*" "load the first SO" - gdb_breakpoint "inc if \$_streq(\$_current_linker_namespace, \"\[\[2\]\]\")" + gdb_breakpoint "inc if \$_linker_namespace == 2" gdb_continue_to_breakpoint "inc" gdb_continue_to_end "" continue 1 } @@ -163,6 +169,12 @@ proc_with_prefix test_conv_vars {} { proc test_info_linker_namespaces {} { clean_restart $::binfile + # Check that "info linker-namespaces" while the inferior is not running + # doesn't crash. + gdb_test "info linker-namespaces" \ + "Current inferior does not support linker namespaces\\. Use \"info sharedlibrary\" instead\\." \ + "info linker-namespaces before running" + if { ![runto_main] } { return } diff --git a/gdb/testsuite/gdb.base/dlmopen.exp b/gdb/testsuite/gdb.base/dlmopen.exp index da17002..e7bf6f3 100644 --- a/gdb/testsuite/gdb.base/dlmopen.exp +++ b/gdb/testsuite/gdb.base/dlmopen.exp @@ -358,15 +358,19 @@ proc_with_prefix test_solib_unmap_events { } { # dynamic linker as pending when some instances of the library were # unloaded, despite there really only being one copy of the dynamic # linker actually loaded into the inferior's address space. - gdb_test_multiple "info breakpoints $bpnum" "check b/p status" { - -re -wrap "$bpnum\\s+breakpoint\\s+keep\\s+y\\s+<PENDING>\\s+\\*$::hex\\s*\r\n\\s+stop only if \\(0\\)" { - fail $gdb_test_name - } - - -re -wrap "$bpnum\\s+breakpoint\\s+keep\\s+y\\s+$::hex\\s*\[^\r\n\]+\r\n\\s+stop only if \\(0\\)" { - pass $gdb_test_name - } - } + set hs {[^\r\n]} + set re_pass \ + [multi_line \ + "" \ + [join \ + [list \ + "$bpnum" "breakpoint" "keep" "y" "$::hex$hs+"] \ + {\s+}] \ + [string cat \ + {\s+} \ + [string_to_regexp "stop only if (0)"] \ + ([string_to_regexp " (target evals)"])?]] + gdb_test "info breakpoints $bpnum" $re_pass "check b/p status" # With all the dlclose calls now complete, we should be back to a # single copy of the dynamic linker. diff --git a/gdb/testsuite/gdb.base/exprs.exp b/gdb/testsuite/gdb.base/exprs.exp index f703c18..81f6f19 100644 --- a/gdb/testsuite/gdb.base/exprs.exp +++ b/gdb/testsuite/gdb.base/exprs.exp @@ -285,11 +285,14 @@ gdb_test "print v_short + " \ gdb_test "print v_short =}{= 3" \ "A syntax error in expression, near `\\}\\{= 3'\\." +set hs {[^\r\n]} +set re_debug [string cat $hs* {[Ss]hift} $hs*] + gdb_test_no_output "set debug parse 1" set saw_start 0 set saw_val 0 gdb_test_multiple "print 23" "print with debugging" -lbl { - -re "\r\nStarting parse(?=\r\n)" { + -re "\r\n${re_debug}(?=\r\n)" { set saw_start 1 exp_continue } diff --git a/gdb/testsuite/gdb.base/filename-completion.exp b/gdb/testsuite/gdb.base/filename-completion.exp index cb3fc90..c10941c 100644 --- a/gdb/testsuite/gdb.base/filename-completion.exp +++ b/gdb/testsuite/gdb.base/filename-completion.exp @@ -385,7 +385,7 @@ proc run_quoting_and_escaping_tests { root } { remove-symbol-file \ "target core" "target exec" "target tfile" \ "maint print c-tdesc" "save gdb-index" - "save gdb-index -dwarf-5" } + "save gdb-index -dwarf-5" "shell ls"} if { [allow_compile_tests] } { lappend all_cmds "compile file" } @@ -408,6 +408,31 @@ proc run_quoting_and_escaping_tests { root } { run_quoting_and_escaping_tests_1 $root $cmd } } + + # Some additional testing of shell command. Test 'shell' and '!' + # when there are multiple filenames on the command line. This + # focuses on completion of the final filename. There is also some + # testing of the shell command above, this tests completion within + # the line. + foreach_with_prefix shell_cmd { "shell " "!" "pipe print 1 | " } { + foreach suffix { "aaa/aa bb" "bb2/dir 1/unique file" } { + set dir $root/$suffix + + regsub -all " " "$dir" "\\ " dir_with_backslash + + with_test_prefix "suffix='$suffix'" { + with_test_prefix "with_backslash" { + run_quoting_and_escaping_tests_1 $root "${shell_cmd}ls $dir_with_backslash" + } + with_test_prefix "with double quotes" { + run_quoting_and_escaping_tests_1 $root "${shell_cmd}ls \"$dir\"" + } + with_test_prefix "with single quotes" { + run_quoting_and_escaping_tests_1 $root "${shell_cmd}ls '$dir'" + } + } + } + } } # Helper for run_unquoted_tests. ROOT is the root directory as setup diff --git a/gdb/testsuite/gdb.base/foll-exec-c++.exp b/gdb/testsuite/gdb.base/foll-exec-c++.exp new file mode 100644 index 0000000..d96310b --- /dev/null +++ b/gdb/testsuite/gdb.base/foll-exec-c++.exp @@ -0,0 +1,24 @@ +# Copyright 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# This file is part of the gdb testsuite + +# See foll-exec.exp.tcl for test details. This file runs the test +# using the C++ compiler. + +require allow_cplus_tests +set lang c++ + +source $srcdir/$subdir/foll-exec.exp.tcl diff --git a/gdb/testsuite/gdb.base/foll-exec-c.exp b/gdb/testsuite/gdb.base/foll-exec-c.exp new file mode 100644 index 0000000..67f62cc --- /dev/null +++ b/gdb/testsuite/gdb.base/foll-exec-c.exp @@ -0,0 +1,23 @@ +# Copyright 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# This file is part of the gdb testsuite + +# See foll-exec.exp.tcl for test details. This file runs the test +# using the C compiler. + +set lang c + +source $srcdir/$subdir/foll-exec.exp.tcl diff --git a/gdb/testsuite/gdb.base/foll-exec.c b/gdb/testsuite/gdb.base/foll-exec.c index a1c9b70..291f803 100644 --- a/gdb/testsuite/gdb.base/foll-exec.c +++ b/gdb/testsuite/gdb.base/foll-exec.c @@ -19,25 +19,38 @@ #include <stdlib.h> #include <unistd.h> #include <string.h> - +#include <libgen.h> +#include <assert.h> #include <limits.h> int global_i = 100; +#ifndef EXECD_PROG +#define EXECD_PROG "execd-prog" +#endif + int main (int argc, char ** argv) { int local_j = global_i + 1; int local_k = local_j + 1; char prog[PATH_MAX]; - int len; + size_t len = PATH_MAX - 1; + + printf ("foll-exec is about to execlp(%s)...\n", EXECD_PROG); + + prog [len] = '\0'; + + strncpy (prog, dirname (argv[0]), len); + len -= strlen (prog); + assert (len > 0); - printf ("foll-exec is about to execlp(execd-prog)...\n"); + strncat (prog, "/", len); + len -= 1; + assert (len > 0); - strcpy (prog, argv[0]); - len = strlen (prog); - /* Replace "foll-exec" with "execd-prog". */ - memcpy (prog + len - 9, "execd-prog", 10); - prog[len + 1] = 0; + strncat (prog, EXECD_PROG, len); + len -= strlen (EXECD_PROG); + assert (len > 0); /* In the following function call, maximum line length exceed the limit 80. This is intentional and required for clang compiler such that complete @@ -45,7 +58,7 @@ int main (int argc, char ** argv) multi-line. */ execlp (prog, /* tbreak-execlp */ prog, "execlp arg1 from foll-exec", (char *) 0); - printf ("foll-exec is about to execl(execd-prog)...\n"); + printf ("foll-exec is about to execl(%s)...\n", EXECD_PROG); /* In the following function call, maximum line length exceed the limit 80. This is intentional and required for clang compiler such that complete @@ -61,7 +74,7 @@ int main (int argc, char ** argv) argv[0] = prog; - printf ("foll-exec is about to execv(execd-prog)...\n"); + printf ("foll-exec is about to execv(%s)...\n", EXECD_PROG); execv (prog, argv); /* tbreak-execv */ } diff --git a/gdb/testsuite/gdb.base/foll-exec.exp b/gdb/testsuite/gdb.base/foll-exec.exp.tcl index ad4c3516..8f96a55 100644 --- a/gdb/testsuite/gdb.base/foll-exec.exp +++ b/gdb/testsuite/gdb.base/foll-exec.exp.tcl @@ -22,33 +22,55 @@ require {istarget "*-linux*"} standard_testfile foll-exec.c -set testfile2 "execd-prog" -set srcfile2 ${testfile2}.c -set binfile2 [standard_output_file ${testfile2}] +# Compile a program that performs an exec as EXECER_LANG, and a +# program that will be exec'd as EXECEE_LANG. Either language can be +# 'c' or 'c++'. Then run various test associated with 'catch exec' +# using the compiled programs. +proc do_exec_tests { execer_lang execee_lang } { + global srcfile testfile + global gdb_prompt -set compile_options debug + # First compile the program to be exec'd, the execee. + set execee_base_filename "execd-prog" + set srcfile2 ${execee_base_filename}.c + set execee_testfile "execd-prog-${execee_lang}" + set execee_testfile_re [string_to_regexp $execee_testfile] + set execee_binfile [standard_output_file $execee_testfile] -# build the first test case -if { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable $compile_options] != "" } { - untested "failed to compile" - return -1 -} + set execee_flags debug + if { $execee_lang == "c++" } { + lappend execee_flags "c++" + } -if { [is_remote target] } { - gdb_remote_download target $binfile2 -} + if { [build_executable "failed to build $execee_testfile" $execee_testfile \ + $srcfile2 $execee_flags] == -1 } { + return + } -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $compile_options] != "" } { - untested "failed to compile" - return -1 -} + if { [is_remote target] } { + gdb_remote_download target $execee_binfile + } -proc do_exec_tests {} { - global binfile srcfile srcfile2 testfile testfile2 - global gdb_prompt + + # Now compile the program to do the exec, the execer. + set execer_testfile "$testfile-${execee_lang}" + set execer_binfile [standard_output_file $execer_testfile] + + set execer_flags debug + if { $execer_lang == "c++" } { + lappend execer_flags "c++" + } + lappend execer_flags "additional_flags=-DEXECD_PROG=\"${execee_testfile}\"" + + if { [build_executable "failed to build $execer_testfile" $execer_testfile \ + $srcfile $execer_flags] == -1 } { + return + } + + # Now we can start running the tests. + clean_restart $execer_binfile # Start the program running, and stop at main. - # if {![runto_main]} { return } @@ -71,7 +93,7 @@ proc do_exec_tests {} { return } - clean_restart $binfile + clean_restart $execer_binfile # Start the program running, and stop at main. # @@ -120,7 +142,7 @@ proc do_exec_tests {} { set execd_line [gdb_get_line_number "after-exec" $srcfile2] send_gdb "next\n" gdb_expect { - -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\ + -re ".*xecuting new program: .*${execee_testfile_re}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\ {pass "step through execlp call"} -re "$gdb_prompt $" {fail "step through execlp call"} timeout {fail "(timeout) step through execlp call"} @@ -160,7 +182,7 @@ proc do_exec_tests {} { # Explicitly kill this program, or a subsequent rerun actually runs # the exec'd program, not the original program... - clean_restart $binfile + clean_restart $execer_binfile # Start the program running, and stop at main. # @@ -193,7 +215,7 @@ proc do_exec_tests {} { send_gdb "continue\n" gdb_expect { - -re ".*xecuting new program:.*${testfile2}.*Catchpoint .*(exec\'d .*${testfile2}).*$gdb_prompt $"\ + -re ".*xecuting new program:.*${execee_testfile_re}.*Catchpoint .*(exec\'d .*${execee_testfile_re}).*$gdb_prompt $"\ {pass "hit catch exec"} -re "$gdb_prompt $" {fail "hit catch exec"} timeout {fail "(timeout) hit catch exec"} @@ -210,7 +232,7 @@ proc do_exec_tests {} { # set msg "info shows catchpoint exec pathname" gdb_test_multiple "info breakpoints" $msg { - -re ".*catchpoint.*keep y.*exec, program \".*${testfile2}\".*$gdb_prompt $" { + -re ".*catchpoint.*keep y.*exec, program \".*${execee_testfile_re}\".*$gdb_prompt $" { pass $msg } } @@ -228,7 +250,7 @@ proc do_exec_tests {} { # Explicitly kill this program, or a subsequent rerun actually runs # the exec'd program, not the original program... - clean_restart $binfile + clean_restart $execer_binfile # Start the program running, and stop at main. # @@ -269,7 +291,7 @@ proc do_exec_tests {} { # send_gdb "next 2\n" gdb_expect { - -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\ + -re ".*xecuting new program: .*${execee_testfile_re}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\ {pass "step through execl call"} -re "$gdb_prompt $" {fail "step through execl call"} timeout {fail "(timeout) step through execl call"} @@ -295,7 +317,7 @@ proc do_exec_tests {} { # Explicitly kill this program, or a subsequent rerun actually runs # the exec'd program, not the original program... - clean_restart $binfile + clean_restart $execer_binfile # Start the program running, and stop at main. # @@ -330,7 +352,7 @@ proc do_exec_tests {} { } send_gdb "next\n" gdb_expect { - -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\ + -re ".*xecuting new program: .*${execee_testfile_re}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\ {pass "step through execv call"} -re "$gdb_prompt $" {fail "step through execv call"} timeout {fail "(timeout) step through execv call"} @@ -356,7 +378,7 @@ proc do_exec_tests {} { # Explicitly kill this program, or a subsequent rerun actually runs # the exec'd program, not the original program... - clean_restart $binfile + clean_restart $execer_binfile # Start the program running, and stop at main. # @@ -370,13 +392,13 @@ proc do_exec_tests {} { # send_gdb "continue\n" gdb_expect { - -re ".*xecuting new program: .*${testfile2}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\ + -re ".*xecuting new program: .*${execee_testfile_re}.*${srcfile2}:${execd_line}.*int local_j = argc;.*$gdb_prompt $"\ {pass "continue through exec"} -re "$gdb_prompt $" {fail "continue through exec"} timeout {fail "(timeout) continue through exec"} } } -clean_restart $binfile - -do_exec_tests +foreach_with_prefix execee_lang { c c++ } { + do_exec_tests $lang $execee_lang +} diff --git a/gdb/testsuite/gdb.base/foll-fork-syscall.c b/gdb/testsuite/gdb.base/foll-fork-syscall.c new file mode 100644 index 0000000..ef695f5 --- /dev/null +++ b/gdb/testsuite/gdb.base/foll-fork-syscall.c @@ -0,0 +1,35 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include <unistd.h> +#include <stdio.h> + +int +main (int argc, char **argv) +{ + int pid, x = 0; + + pid = fork (); + if (pid == 0) /* set breakpoint here */ + printf ("I am the child\n"); + else + printf ("I am the parent\n"); + + chdir ("."); + ++x; /* set exit breakpoint here */ + return 0; +} diff --git a/gdb/testsuite/gdb.base/foll-fork-syscall.exp b/gdb/testsuite/gdb.base/foll-fork-syscall.exp new file mode 100644 index 0000000..21ef334 --- /dev/null +++ b/gdb/testsuite/gdb.base/foll-fork-syscall.exp @@ -0,0 +1,143 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test catching syscalls with all permutations of follow-fork parent/child +# and detach-on-fork on/off. + +# Test relies on checking follow-fork output. Do not run if gdb debug is +# enabled because it will be redirected to the log. +require !gdb_debug_enabled +require {is_any_target "i?86-*-*" "x86_64-*-*"} +require allow_fork_tests + +standard_testfile + +if {[build_executable "failed to prepare" $testfile $srcfile debug]} { + return -1 +} + +proc setup_gdb {} { + global testfile + + clean_restart $testfile + + if {![runto_main]} { + return false + } + + # Set a breakpoint after the fork is "complete." + if {![gdb_breakpoint [gdb_get_line_number "set breakpoint here"]]} { + return false + } + + # Set exit breakpoint (to prevent inferior from exiting). + if {![gdb_breakpoint [gdb_get_line_number "set exit breakpoint here"]]} { + return false + } + return true +} + +# Check that fork catchpoints are supported, as an indicator for whether +# fork-following is supported. Return 1 if they are, else 0. + +proc_with_prefix check_fork_catchpoints {} { + global gdb_prompt + + if { ![setup_gdb] } { + return false + } + + # Verify that the system supports "catch fork". + gdb_test "catch fork" "Catchpoint \[0-9\]* \\(fork\\)" "insert first fork catchpoint" + set has_fork_catchpoints false + gdb_test_multiple "continue" "continue to first fork catchpoint" { + -re ".*Your system does not support this type\r\nof catchpoint.*$gdb_prompt $" { + unsupported "continue to first fork catchpoint" + } + -re ".*Catchpoint.*$gdb_prompt $" { + set has_fork_catchpoints true + pass "continue to first fork catchpoint" + } + } + + return $has_fork_catchpoints +} + +proc_with_prefix test_catch_syscall {follow-fork-mode detach-on-fork} { + # Start with shiny new gdb instance. + if {![setup_gdb]} { + return + } + + # The "Detaching..." and "Attaching..." messages may be hidden by + # default. + gdb_test_no_output "set verbose" + + # Setup modes to test. + gdb_test_no_output "set follow-fork-mode ${follow-fork-mode}" + gdb_test_no_output "set detach-on-fork ${detach-on-fork}" + + gdb_test "catch fork" "Catchpoint . \\(fork\\)" + gdb_test "catch syscall chdir" "Catchpoint . \\(syscall 'chdir'.*\\)" + + # Which inferior we're expecting to follow. Assuming the parent + # will be inferior #1, and the child will be inferior #2. + if {${follow-fork-mode} == "parent"} { + set following_inf 1 + } else { + set followin_inf 2 + } + # Next stop should be the fork catchpoint. + set expected_re "" + append expected_re "Catchpoint . \\(forked process.*" + gdb_test "continue" $expected_re "continue to fork catchpoint" + + # Next stop should be the breakpoint after the fork. + set expected_re ".*" + if {${follow-fork-mode} == "child" || ${detach-on-fork} == "off"} { + append expected_re "\\\[New inferior.*" + } + if {${detach-on-fork} == "on"} { + append expected_re "\\\[Detaching after fork from " + if {${follow-fork-mode} == "parent"} { + append expected_re "child" + } else { + append expected_re "parent" + } + append expected_re " process.*" + } + append expected_re "Breakpoint .*set breakpoint here.*" + gdb_test "continue" $expected_re "continue to breakpoint after fork" + + # Next stop should be the syscall catchpoint. + set expected_re ".*Catchpoint . \\(call to syscall chdir\\).*" + gdb_test continue $expected_re "continue to chdir syscall" +} + +# Check for follow-fork support. +if {![check_fork_catchpoints]} { + untested "follow-fork not supported" + return +} + +# Test all permutations. +foreach_with_prefix follow-fork-mode {"parent" "child"} { + + # Do not run tests when not detaching from the parent. + # See breakpoints/13457 for discussion. + foreach_with_prefix detach-on-fork {"on"} { + test_catch_syscall ${follow-fork-mode} ${detach-on-fork} + } +} diff --git a/gdb/testsuite/gdb.base/foll-fork.exp b/gdb/testsuite/gdb.base/foll-fork.exp index 94755c6..12db516 100644 --- a/gdb/testsuite/gdb.base/foll-fork.exp +++ b/gdb/testsuite/gdb.base/foll-fork.exp @@ -17,6 +17,8 @@ # enabled as it will be redirected to the log. require !gdb_debug_enabled +require allow_fork_tests + standard_testfile if {[build_executable "failed to prepare" $testfile $srcfile debug]} { diff --git a/gdb/testsuite/gdb.base/foll-vfork.exp b/gdb/testsuite/gdb.base/foll-vfork.exp index 266df46..6ca7711 100644 --- a/gdb/testsuite/gdb.base/foll-vfork.exp +++ b/gdb/testsuite/gdb.base/foll-vfork.exp @@ -18,12 +18,7 @@ # either execs or exits --- since those events take somewhat different # code paths in GDB, both variants are exercised. -# Until "set follow-fork-mode" and "catch vfork" are implemented on -# other targets... -# -if {![istarget "*-linux*"]} { - continue -} +require allow_fork_tests standard_testfile .c -exit.c vforked-prog.c diff --git a/gdb/testsuite/gdb.base/fork-no-detach-follow-child-dlopen.exp b/gdb/testsuite/gdb.base/fork-no-detach-follow-child-dlopen.exp index 311d7ba..2d47d5d 100644 --- a/gdb/testsuite/gdb.base/fork-no-detach-follow-child-dlopen.exp +++ b/gdb/testsuite/gdb.base/fork-no-detach-follow-child-dlopen.exp @@ -23,6 +23,7 @@ # in the source of the shlib, and "list" should display the source where # the program stopped. +require allow_fork_tests require allow_shlib_tests standard_testfile .c -shlib.c diff --git a/gdb/testsuite/gdb.base/fork-print-inferior-events.exp b/gdb/testsuite/gdb.base/fork-print-inferior-events.exp index 26ed2f9..19ace00 100644 --- a/gdb/testsuite/gdb.base/fork-print-inferior-events.exp +++ b/gdb/testsuite/gdb.base/fork-print-inferior-events.exp @@ -19,6 +19,8 @@ # inferior-events [on,off]', 'set follow-fork-mode [child,parent]' and # 'set detach-on-fork [on,off]' are the correct ones. +require allow_fork_tests + # This test relies on "run", so it cannot run on target remote stubs. require !use_gdb_stub diff --git a/gdb/testsuite/gdb.base/fork-running-state.exp b/gdb/testsuite/gdb.base/fork-running-state.exp index 4b810a6..c446800 100644 --- a/gdb/testsuite/gdb.base/fork-running-state.exp +++ b/gdb/testsuite/gdb.base/fork-running-state.exp @@ -17,6 +17,8 @@ # in non-stop). GDB used to miss updating the parent/child running # states after a fork. +require allow_fork_tests + standard_testfile # The test proper. diff --git a/gdb/testsuite/gdb.base/infcall-failure.exp b/gdb/testsuite/gdb.base/infcall-failure.exp index 66bccd1..e7aeac1 100644 --- a/gdb/testsuite/gdb.base/infcall-failure.exp +++ b/gdb/testsuite/gdb.base/infcall-failure.exp @@ -131,7 +131,13 @@ proc_with_prefix run_cond_hits_segfault_test { async_p non_stop_p } { [multi_line \ "Continuing\\." \ "" \ - "Program received signal SIGSEGV, Segmentation fault\\." \ + [string cat \ + [string_to_regexp \ + "Program received signal SIGSEGV, Segmentation fault."] \ + "("] \ + [string cat \ + [string_to_regexp "Address not mapped to object."] \ + ")?"] \ "${::hex} in func_segfault \\(\\) at \[^\r\n\]+:${::segv_line}" \ "${::decimal}\\s+\[^\r\n\]+Segfault here\[^\r\n\]+" \ "Error in testing condition for breakpoint ${bp_1_num}:" \ @@ -161,7 +167,13 @@ proc_with_prefix run_call_hits_segfault_test { async_p non_stop_p } { gdb_test "call func_segfault ()" \ [multi_line \ "" \ - "Program received signal SIGSEGV, Segmentation fault\\." \ + [string cat \ + [string_to_regexp \ + "Program received signal SIGSEGV, Segmentation fault."] \ + "("] \ + [string cat \ + [string_to_regexp "Address not mapped to object."] \ + ")?"] \ "${::hex} in func_segfault \\(\\) at \[^\r\n\]+:${::segv_line}" \ "${::decimal}\\s+\[^\r\n\]+Segfault here\[^\r\n\]+" \ "The program being debugged was signaled while in a function called from GDB\\." \ diff --git a/gdb/testsuite/gdb.base/inferior-died.exp b/gdb/testsuite/gdb.base/inferior-died.exp index 3992561..764a88d 100644 --- a/gdb/testsuite/gdb.base/inferior-died.exp +++ b/gdb/testsuite/gdb.base/inferior-died.exp @@ -13,10 +13,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -# Until "set follow-fork-mode" and "catch fork" are implemented on -# other targets... -# -require {istarget "*-*-linux*"} +require allow_fork_tests require support_displaced_stepping diff --git a/gdb/testsuite/gdb.base/info-shared.exp b/gdb/testsuite/gdb.base/info-shared.exp index 6f1b2d6..e81b28e 100644 --- a/gdb/testsuite/gdb.base/info-shared.exp +++ b/gdb/testsuite/gdb.base/info-shared.exp @@ -79,6 +79,9 @@ proc check_info_shared { test expect1 expect2 } { } } +# Check that "info shared" before running doesn't crash. +check_info_shared "info sharedlibrary before running" 0 0 + # Start the inferior, and check neither of the libraries are loaded at # the start. if ![runto_main] { diff --git a/gdb/testsuite/gdb.base/interrupt-daemon.exp b/gdb/testsuite/gdb.base/interrupt-daemon.exp index 161f854..8b8c61d 100644 --- a/gdb/testsuite/gdb.base/interrupt-daemon.exp +++ b/gdb/testsuite/gdb.base/interrupt-daemon.exp @@ -16,6 +16,8 @@ # Make sure that we can interrupt an inferior that forks and moves to # its own session. +require allow_fork_tests + standard_testfile if {[build_executable "failed to build" $testfile $srcfile {debug}]} { diff --git a/gdb/testsuite/gdb.base/jit-elf-fork.exp b/gdb/testsuite/gdb.base/jit-elf-fork.exp index 81d3350..c1fa428 100644 --- a/gdb/testsuite/gdb.base/jit-elf-fork.exp +++ b/gdb/testsuite/gdb.base/jit-elf-fork.exp @@ -15,6 +15,7 @@ # Test fork handling of an inferior that has JIT-ed objfiles. +require allow_fork_tests require allow_shlib_tests load_lib jit-elf-helpers.exp diff --git a/gdb/testsuite/gdb.base/kill-detach-inferiors-cmd.exp b/gdb/testsuite/gdb.base/kill-detach-inferiors-cmd.exp index ef4bb88..57ec330 100644 --- a/gdb/testsuite/gdb.base/kill-detach-inferiors-cmd.exp +++ b/gdb/testsuite/gdb.base/kill-detach-inferiors-cmd.exp @@ -19,6 +19,7 @@ # commands. require can_spawn_for_attach +require allow_multi_inferior_tests standard_testfile set executable $testfile diff --git a/gdb/testsuite/gdb.base/maint.exp b/gdb/testsuite/gdb.base/maint.exp index 52282bc..7936e53 100644 --- a/gdb/testsuite/gdb.base/maint.exp +++ b/gdb/testsuite/gdb.base/maint.exp @@ -52,6 +52,40 @@ if {[prepare_for_testing "failed to prepare" $testfile \ return -1 } +# Check "maint set per-command" warnings. We do this early so that +# the following tests don't need to expect them, as GDB only warns +# once. + +with_test_prefix "warnings" { + # Potential warning given by "maint set per-command time". + set maybe_per_command_warning \ + "(?:warning: per-thread run time information not available on this platform)?" + + # This one should not issue the "per-command time" warning. + with_test_prefix "per-command space" { + gdb_test_no_output "mt set per-command space on" + gdb_test_no_output "mt set per-command space off" + } + + # These might warn. "per-command on" enables all sub commands, so + # might trigger the "per-command time" warning. + foreach cmd {"per-command" "per-command time"} { + with_test_prefix $cmd { + # GDB only warns once, so restart between commands. + clean_restart $binfile + gdb_test "mt set $cmd on" "$maybe_per_command_warning" + gdb_test "mt set $cmd off" "command started" + gdb_test_no_output "mt set $cmd on" \ + "mt set $cmd on, again" + gdb_test "mt set $cmd off" "command started" \ + "mt set $cmd off, again" + } + } + + # We've already warned once above, so the following tests don't + # need to expect the warning. +} + set readnow_p [readnow] # The commands we test here produce many lines of output; disable "press @@ -205,8 +239,8 @@ set re \ "( Number of \"partial\" symbols read: $decimal" \ ")?( Number of psym tables \\(not yet expanded\\): $decimal" \ ")?( Total memory used for psymbol cache: $decimal" \ - ")?( Number of read CUs: $decimal" \ - " Number of unread CUs: $decimal" \ + ")?( Number of read units: $decimal" \ + " Number of unread units: $decimal" \ ")? Total memory used for objfile obstack: $decimal" \ " Total memory used for BFD obstack: $decimal" \ " Total memory used for string cache: $decimal" \ diff --git a/gdb/testsuite/gdb.base/multi-forks.exp b/gdb/testsuite/gdb.base/multi-forks.exp index 61a240f..3facccb 100644 --- a/gdb/testsuite/gdb.base/multi-forks.exp +++ b/gdb/testsuite/gdb.base/multi-forks.exp @@ -13,11 +13,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -# Until "set follow-fork-mode" and "catch fork" are implemented on -# other targets... -# -require {istarget "*-*-linux*"} - +require allow_fork_tests standard_testfile .c diff --git a/gdb/testsuite/gdb.base/options.exp b/gdb/testsuite/gdb.base/options.exp index 7822e4a..a0947e2 100644 --- a/gdb/testsuite/gdb.base/options.exp +++ b/gdb/testsuite/gdb.base/options.exp @@ -508,12 +508,26 @@ proc_with_prefix test-thread-apply {} { proc_with_prefix test-info-threads {} { test_gdb_complete_multiple "info threads " "" "" { "-gid" + "-running" + "-stopped" "ID" } + test_gdb_complete_multiple "info threads " "-" "" { + "-gid" + "-running" + "-stopped" + } + test_gdb_complete_unique \ - "info threads -" \ + "info threads -g" \ "info threads -gid" + test_gdb_complete_unique \ + "info threads -r" \ + "info threads -running" + test_gdb_complete_unique \ + "info threads -s" \ + "info threads -stopped" # "ID" isn't really something the user can type. test_gdb_complete_none "info threads I" diff --git a/gdb/testsuite/gdb.base/pie-fork.exp b/gdb/testsuite/gdb.base/pie-fork.exp index 48c01d9..86407b4 100644 --- a/gdb/testsuite/gdb.base/pie-fork.exp +++ b/gdb/testsuite/gdb.base/pie-fork.exp @@ -16,6 +16,8 @@ # Test that we can follow forks properly when the executable is # position-independent. +require allow_fork_tests + standard_testfile set opts [list debug pie] diff --git a/gdb/testsuite/gdb.base/readline-ask.exp b/gdb/testsuite/gdb.base/readline-ask.exp index 3f98e13..2948970 100644 --- a/gdb/testsuite/gdb.base/readline-ask.exp +++ b/gdb/testsuite/gdb.base/readline-ask.exp @@ -13,6 +13,8 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +require {!is_remote host} + standard_testfile .c set inputrc ${srcdir}/${subdir}/${testfile}.inputrc diff --git a/gdb/testsuite/gdb.base/readline.exp b/gdb/testsuite/gdb.base/readline.exp index 198d686..9b87790 100644 --- a/gdb/testsuite/gdb.base/readline.exp +++ b/gdb/testsuite/gdb.base/readline.exp @@ -21,6 +21,8 @@ # Tests for readline operations. # +require {!is_remote host} + # This function is used to test operate-and-get-next. # NAME is the name of the test. # ARGS is a list of alternating commands and expected results. diff --git a/gdb/testsuite/gdb.base/run-control-while-bg-execution.exp b/gdb/testsuite/gdb.base/run-control-while-bg-execution.exp index 22913ca..eaee010 100644 --- a/gdb/testsuite/gdb.base/run-control-while-bg-execution.exp +++ b/gdb/testsuite/gdb.base/run-control-while-bg-execution.exp @@ -49,6 +49,11 @@ if {[build_executable "failed to prepare" $testfile $srcfile]} { # - run: use the run command # - attach: start a process outside of GDB and attach it proc do_test { action1 action2 } { + + if {$action1 == "add" && ![allow_multi_inferior_tests]} { + return + } + save_vars { ::GDBFLAGS } { append ::GDBFLAGS " -ex \"maintenance set target-non-stop on\"" clean_restart $::binfile diff --git a/gdb/testsuite/gdb.base/sigall.exp b/gdb/testsuite/gdb.base/sigall.exp index b23e3c5..461a92b 100644 --- a/gdb/testsuite/gdb.base/sigall.exp +++ b/gdb/testsuite/gdb.base/sigall.exp @@ -41,13 +41,14 @@ proc test_one_sig {nextsig} { setup_xfail "i*86-pc-linuxoldld-gnu" "i*86-pc-linuxaout-gnu" } # On Linux SPARC64 systems SIGLOST==SIGPWR and gdb identifies - # the raised signal as PWR. - if {$thissig == "LOST" && [istarget "sparc64-*-linux*"]} { + # the raised signal as PWR. Same for Cygwin. + if {$thissig == "LOST" + && ([istarget "sparc64-*-linux*"] || [istarget "*-*-cygwin*"])} { set esig "PWR" } gdb_test "continue" \ - "Continuing.*Program received signal SIG$esig.*" \ + "Continuing.* received signal SIG$esig.*" \ "get signal $esig" } @@ -177,7 +178,7 @@ gdb_test "handle SIGTERM stop print" \ "SIGTERM\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes.*" gdb_test "b handle_TERM" "Breakpoint \[0-9\]+ .*" gdb_test "continue" \ - "Continuing.*Program received signal SIGTERM.*" \ + "Continuing.* received signal SIGTERM.*" \ "get signal TERM" gdb_test "continue" "Breakpoint.*handle_TERM.*" "send signal TERM" gdb_continue_to_end "continue to sigall exit" diff --git a/gdb/testsuite/gdb.base/source-search.c b/gdb/testsuite/gdb.base/source-search.c new file mode 100644 index 0000000..2320c5c --- /dev/null +++ b/gdb/testsuite/gdb.base/source-search.c @@ -0,0 +1,127 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +int +main (void) +{ + /* Line 21 */ + /* Line 22 */ + /* Line 23 */ + /* Line 24 */ + /* Line 25 */ + /* Line 26 */ + /* Line 27 */ + /* Line 28 */ + /* Line 29 */ + /* Line 30 */ + /* Line 31 */ + /* Line 32 */ + /* Line 33 */ + /* Line 34 */ + /* Line 35 */ + /* Line 36 */ + /* Line 37 */ + /* Line 38 */ + /* Line 39 */ + /* Line 40 */ + /* Line 41 */ + /* Line 42 */ + /* Line 43 */ + /* Line 44 */ + /* Line 45 */ + /* Line 46 */ + /* Line 47 */ + /* Line 48 */ + /* Line 49 */ + /* Line 50 */ + /* Line 51 */ + /* Line 52 */ + /* Line 53 */ + /* Line 54 */ + /* Line 55 */ + /* Line 56 */ + /* Line 57 */ + /* Line 58 */ + /* Line 59 */ + /* Line 60 */ + /* Line 61 */ + /* Line 62 */ + /* Line 63 */ + /* Line 64 */ + /* Line 65 */ + /* Line 66 */ + /* Line 67 */ + /* Line 68 */ + /* Line 69 */ + /* Line 70 */ + /* Line 71 */ + /* Line 72 */ + /* Line 73 */ + /* Line 74 */ + /* Line 75 */ + /* Line 76 */ + /* Line 77 */ + /* Line 78 */ + /* Line 79 */ + /* Line 80 */ + /* Line 81 */ + /* Line 82 */ + /* Line 83 */ + /* Line 84 */ + /* Line 85 */ + /* Line 86 */ + /* Line 87 */ + /* Line 88 */ + /* Line 89 */ + /* Line 90 */ + /* Line 91 */ + /* Line 92 */ + /* Line 93 */ + /* Line 94 */ + /* Line 95 */ + /* Line 96 */ + /* Line 97 */ + /* Line 98 */ + /* Line 99 */ + /* Line 100 */ + /* Line 101 */ + /* Line 102 */ + /* Line 103 */ + /* Line 104 */ + /* Line 105 */ + /* Line 106 */ + /* Line 107 */ + /* Line 108 */ + /* Line 109 */ + /* Line 110 */ + /* Line 111 */ + /* Line 112 */ + /* Line 113 */ + /* Line 114 */ + /* Line 115 */ + /* Line 116 */ + /* Line 117 */ + /* Line 118 */ + /* Line 119 */ + /* Line 120 */ + /* Line 121 */ + /* Line 122 */ + /* Line 123 */ + /* Line 124 */ + /* Line 125 */ + return 0; +} /* Last line. */ diff --git a/gdb/testsuite/gdb.base/source-search.exp b/gdb/testsuite/gdb.base/source-search.exp new file mode 100644 index 0000000..559c500 --- /dev/null +++ b/gdb/testsuite/gdb.base/source-search.exp @@ -0,0 +1,106 @@ +# Copyright 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test 'forward-search' and 'reverse-search' commands. This test +# relies on some hard-coded line numbers relating to the source file. +# We could switch to using gdb_get_line_number, but it doesn't feel +# like that would add much value; just don't change the source file. + +standard_testfile + +if { [prepare_for_testing "failed to prepare" $testfile $srcfile] } { + return +} + +gdb_test "forward-search This testcase is part" \ + "1\\s+/\\* This testcase is part of GDB, the GNU debugger\\." \ + "search for first line of the file" + +gdb_test "forward-search This testcase is part" \ + "Expression not found" \ + "repeated search doesn't find the same first line" + +# The 'reverse-search' command starts searching from the line before +# the last line displayed. So in this case, the reverse search starts +# from line 0, i.e. nothing is searched. +gdb_test "reverse-search This testcase is part" \ + "Expression not found" \ + "reverse search doesn't find the first line either" + +# List some source lines, and then perform some forward-searches. The +# searches start from the first line after the last line displayed. +gdb_test "list 20" ".*" \ + "list source code ahead of a forward-search" +gdb_test "forward-search Line 2" \ + "25\\s+/\\* Line 25 \\*/" \ + "first forward-search after a list" +gdb_test "forward-search Line 2" \ + "26\\s+/\\* Line 26 \\*/" \ + "second forward-search after a list" +gdb_test "forward-search Line 2" \ + "27\\s+/\\* Line 27 \\*/" \ + "third forward-search after a list" + +# Now reverse-search from where we got too. +gdb_test "reverse-search Line 2" \ + "26\\s+/\\* Line 26 \\*/" \ + "first reverse-search for 'Line 2'" +gdb_test "reverse-search Line 2" \ + "25\\s+/\\* Line 25 \\*/" \ + "second reverse-search for 'Line 2'" +gdb_test "reverse-search Line 2" \ + "24\\s+/\\* Line 24 \\*/" \ + "third reverse-search for 'Line 2'" + +# List some source lines, and then perform a reverse-search. The +# search starts frm the first line before the last line displayed. +gdb_test "list 20" ".*" \ + "list source code ahead of a reverse-search" +gdb_test "reverse-search Line 2" \ + "23\\s+/\\* Line 23 \\*/" \ + "reverse-search after a list" + +# List the last lines of the file, then reverse search for the last +# line. As reverse-search starts on the line before the last line +# displayed, this will fail to find the last line. +gdb_test "list 127" +gdb_test "reverse-search Last line" \ + "Expression not found" \ + "reverse search for the last line fails" + +# List some lines from the middle of the file. Then try an invalid +# 'list' command. Finally, check searches pick up from the middle of +# the file where the first 'list' successfully completed. +foreach_with_prefix search_direction { forward reverse } { + foreach_with_prefix bad_list { out-of-range backwards } { + gdb_test "list 50" + + if { $bad_list eq "out-of-range" } { + gdb_test "list 1000" \ + "Line number 995 out of range; \[^\r\n\]+ has 127 lines\\." + } else { + gdb_test_no_output "list 60,50" + } + + if { $search_direction eq "forward" } { + set line 55 + } else { + set line 53 + } + + gdb_test "${search_direction}-search Line" \ + "$line\\s+/\\* Line $line \\*/" + } +} diff --git a/gdb/testsuite/gdb.base/step-over-exit.exp b/gdb/testsuite/gdb.base/step-over-exit.exp index 2370f97..6dfa7bb 100644 --- a/gdb/testsuite/gdb.base/step-over-exit.exp +++ b/gdb/testsuite/gdb.base/step-over-exit.exp @@ -13,11 +13,14 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -standard_testfile - # Test a thread is doing step-over a syscall instruction which is exit, # and GDBserver should cleanup its state of step-over properly. +# The testcase relies on follow-fork-mode child. +require allow_fork_tests + +standard_testfile + set syscall_insn "" # Define the syscall instruction for each target. diff --git a/gdb/testsuite/gdb.base/style.exp b/gdb/testsuite/gdb.base/style.exp index c10be3b..6b1b08e 100644 --- a/gdb/testsuite/gdb.base/style.exp +++ b/gdb/testsuite/gdb.base/style.exp @@ -13,6 +13,8 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +require {!is_remote host} + load_lib gdb-python.exp # Test CLI output styling. @@ -323,10 +325,10 @@ proc run_style_tests { } { gdb_test_no_output "set style version background 255" gdb_test_no_output "set style version foreground #FED210" gdb_test "show style version background" \ - "The \033\\\[38;2;254;210;16;48;5;255;22;27m.*\".*version.*\".*style.*\033\\\[m background color is: 255" \ + "The \033\\\[38;2;254;210;16;48;5;255;22;23;24;27m.*\".*version.*\".*style.*\033\\\[m background color is: 255" \ "Version's 256-color background style" gdb_test "show style version foreground" \ - "The \033\\\[38;2;254;210;16;48;5;255;22;27m.*\".*version.*\".*style.*\033\\\[m foreground color is: #FED210" \ + "The \033\\\[38;2;254;210;16;48;5;255;22;23;24;27m.*\".*version.*\".*style.*\033\\\[m foreground color is: #FED210" \ "Version's TrueColor foreground style" } @@ -751,6 +753,286 @@ proc test_enable_styling_warning { } { } } +# Run an 'apropos' command. Each line of output starts with a +# non-default style (command style). Ensure that pagination triggers +# during the 'apropos' output such that, at the point pagination kicks +# in, a non-default style is in effect. +# +# Then, at the pagination prompt, quit the command. +# +# Next, run a command which switches to a different style, and then +# back to the current style. +# +# At one point, a bug in the pagination code would leave the +# non-default style from the 'apropos' command recorded as the current +# style, such that the second command would switch back to the earlier +# style. +proc test_pagination_cmd_after_quit_styling {} { + with_ansi_styling_terminal { + clean_restart + } + + # We're going to use 'apropos time'. Check that with a height of + # 12 lines, each line starts with a non-default style, and that we + # do see the pagination prompt. This means that there are more + # than 12 lines for this command. + with_test_prefix "validate apropos output" { + gdb_test_no_output "set height 12" + + set saw_pagination_prompt false + gdb_test_multiple "apropos time" "" { + -re "^apropos time\r\n" { + exp_continue + } + -re "^\033\\\[39;49;1;23;24;27m\[^\r\n\]+\r\n" { + exp_continue + } + -re "^$::pagination_prompt$" { + set saw_pagination_prompt true + send_gdb "q\n" + exp_continue + } + -re "^q\r\n" { + exp_continue + } + -re "^Quit\r\n" { + exp_continue + } + -re "^$::gdb_prompt $" { + gdb_assert { $saw_pagination_prompt } $gdb_test_name + } + -re "^\[^\r\n\]+\r\n" { + exp_continue + } + } + } + + # Now reduce the height to 10 and re-run 'apropos time'. Based on + # the previous check, we know that this is going to present the + # pagination prompt when a non-default style is in use. + gdb_test_no_output "set height 10" + + set saw_pagination_prompt false + gdb_test_multiple "apropos time" "" { + -re "$::pagination_prompt" { + set saw_pagination_prompt true + send_gdb "q\n" + exp_continue + } + -re "\r\n$::gdb_prompt $" { + gdb_assert { $saw_pagination_prompt } $gdb_test_name + } + } + + # The help output for this maintenance command switches to a + # different style, and then back to the default. If the + # pagination bug still exists, then this would switch back to the + # non-default style that was in use when pagination kicked in + # above. + gdb_test "maintenance time" \ + "^\"\033\\\[39;49;1;23;24;27mmaintenance time\033\\\[m\" takes a numeric argument\\." +} + +# Helper for test_pagination_prompt_styling. Return false if STR, a +# line that appears immediately before a pagination prompt, matches +# the pattern for needing a style reset at the end, but does not have +# the style reset. +# +# In all other cases, return true. So lines that don't match the +# known pattern for neededing a style reset will always return true, +# as will lines that match the pattern, and do have the style reset. +proc previous_line_is_ok { str } { + + # Create a copy of STR with all the '\033' characters removed. + # Then compare string lengths to get a count of the '\033' + # charactes present in STR. + regsub -all "\033" $str {} stripped + set count [expr [string length $str] - [string length $stripped]] + + # If STR switched styles, then it _must_ switch back again, + # otherwise the pagination prompt will be in the wrong style. + # This means that there _must_ be an even number of '\033' + # characters in STR. If there is not then we switched style, but + # failed to switch back. + if { [expr $count % 2] != 0 } { + return false + } + + # For lines that don't match this pattern, we cannot comment on + # where the style reset should occur, so lets just claim the line + # is fine. + if { ![regexp "\\s+$::hex - $::hex is \[^\r\n\]+ in \033" $str] } { + return true + } + + # This line did match the above pattern, so we know that a style + # reset _must_ occur at the end of the line. If it doesn't then + # this line is not OK. + if { ![regexp "\033\\\[m$" $str] } { + return false + } + + # All tests passed, this line looks OK. + return true +} + +# Test that the pagination prompt is displayed unstyled. This is done +# by looking at the 'info files' output and selecting a width that +# will mean we should get a pagination prompt part way through a +# styled filename. +# +# Then, re-run 'info files' and check that for every pagination +# prompt, the previous line disables styling as expected. +proc test_pagination_prompt_styling {} { + with_ansi_styling_terminal { + clean_restart $::binfile + } + + if {![runto_main]} { + return + } + + # Set height so we actually get a pagination prompt. + gdb_test_no_output "set height 3" + + # Scan the 'info files' output and set DESIRED_WIDTH such that it + # will trigger pagination part-way through a styled filename. + set desired_width 0 + gdb_test_multiple "info files" "find good test width" { + -re "^info files\r\n" { + exp_continue + } + + -re "^$::pagination_prompt$" { + send_gdb "\n" + exp_continue + } + + -re "^$::gdb_prompt $" { + } + + -re "^((\\s+$::hex - $::hex is \[^\r\n\]+ in )\[^\r\n\]+)\r\n" { + if { $desired_width == 0 } { + set full_line $expect_out(1,string) + set inner_line $expect_out(2,string) + set desired_width [expr [string length $inner_line] + ([string length $full_line] - [string length $inner_line]) / 2] + } + exp_continue + } + + -re "^\[^\r\n\]*\r\n" { + exp_continue + } + } + + if { $desired_width < [string length $::pagination_prompt_str] + 2 } { + # Avoid readline wrapping after printing the pagination prompt. + return + } + + # Now setup the screen width. + gdb_test_no_output "set width $desired_width" \ + "set width to desired width" + + # Re-run 'info files'. Check that the content before any + # pagination prompt correctly disables styling. + set saw_bad_line false + set prev_line "" + gdb_test_multiple "info files" "check pagination prompt styling" { + -re "^info files\r\n" { + exp_continue + } + + -re "^$::pagination_prompt$" { + if { ![previous_line_is_ok $prev_line] } { + set saw_bad_line true + } + send_gdb "\n" + exp_continue + } + + -re "^(\[^\r\n\]+)$::pagination_prompt$" { + set prev_line $expect_out(1,string) + if { ![previous_line_is_ok $prev_line] } { + set saw_bad_line true + } + send_gdb "\n" + exp_continue + } + + -re "^$::gdb_prompt $" { + gdb_assert { !$saw_bad_line } $gdb_test_name + } + + -re "^(\[^\r\n\]*)\r\n" { + set prev_line $expect_out(1,string) + exp_continue + } + } +} + +# Test that GDB can correctly restore the current style after a +# pagination prompt. +# +# Set the logging file to a garbage string based on LENGTH (is +# actually 2x LENGTH), then 'show logging file'. Press return at the +# pagination prompt, and check that the reset of the filename is +# styled correctly, and that GDB correctly switches back to the +# default style once the logging file has finished. +proc test_pagination_continue_styling_1 { length } { + with_ansi_styling_terminal { + clean_restart $::binfile + } + + set filename [string repeat "ax" $length] + + gdb_test_no_output "set logging file $filename" + + gdb_test_no_output "set height 3" + gdb_test_no_output "set width 80" + + set saw_bad_styling false + gdb_test_multiple "show logging file" "" { + -re "^show logging file\r\n" { + exp_continue + } + + -re "^The current logfile is \"\033\\\[32;49;22;23;24;27m(?:ax)+\033\\\[m" { + exp_continue + } + + -re "^\r\n\033\\\[32;49;22;23;24;27m(?:ax)+\033\\\[m(?=--)" { + exp_continue + } + + -re "^\r\n\033\\\[32;49;22;23;24;27m(?:ax)+(?=--)" { + set saw_bad_styling true + exp_continue + } + + -re "^\r\n\033\\\[32;49;22;23;24;27m(?:ax)+\033\\\[m\"\\.\r\n" { + exp_continue + } + + -re "^$::gdb_prompt $" { + gdb_assert { !$saw_bad_styling } $gdb_test_name + } + + -re "^$::pagination_prompt$$" { + send_gdb "\n" + exp_continue + } + } +} + +# Wrapper around test_pagination_continue_styling_1, calls that +# function with different lengths. +proc test_pagination_continue_styling { } { + foreach_with_prefix length { 80 160 } { + test_pagination_continue_styling_1 $length + } +} + # Check to see if the Python styling of disassembler output is # expected or not, this styling requires Python support in GDB, and # the Python pygments module to be available. @@ -793,3 +1075,6 @@ test_colorsupport_truecolor test_colorsupport_truecolor_only test_enable_styling_warning +test_pagination_cmd_after_quit_styling +test_pagination_prompt_styling +test_pagination_continue_styling diff --git a/gdb/testsuite/gdb.base/tls-common.exp.tcl b/gdb/testsuite/gdb.base/tls-common.exp.tcl index 7aa7f46..fc212a9 100644 --- a/gdb/testsuite/gdb.base/tls-common.exp.tcl +++ b/gdb/testsuite/gdb.base/tls-common.exp.tcl @@ -1,4 +1,4 @@ -# Copyright 2024 Free Software Foundation, Inc. +# Copyright 2024-2025 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or diff --git a/gdb/testsuite/gdb.base/tls-dlobj-lib.c b/gdb/testsuite/gdb.base/tls-dlobj-lib.c index c69bab7..e82a064 100644 --- a/gdb/testsuite/gdb.base/tls-dlobj-lib.c +++ b/gdb/testsuite/gdb.base/tls-dlobj-lib.c @@ -1,6 +1,6 @@ /* This testcase is part of GDB, the GNU debugger. - Copyright 2024 Free Software Foundation, Inc. + Copyright 2024-2025 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/gdb/testsuite/gdb.base/tls-dlobj.c b/gdb/testsuite/gdb.base/tls-dlobj.c index 322bdda..a93f4a7 100644 --- a/gdb/testsuite/gdb.base/tls-dlobj.c +++ b/gdb/testsuite/gdb.base/tls-dlobj.c @@ -1,6 +1,6 @@ /* This testcase is part of GDB, the GNU debugger. - Copyright 2024 Free Software Foundation, Inc. + Copyright 2024-2025 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/gdb/testsuite/gdb.base/tls-dlobj.exp b/gdb/testsuite/gdb.base/tls-dlobj.exp index 02f2ff8..32e869e 100644 --- a/gdb/testsuite/gdb.base/tls-dlobj.exp +++ b/gdb/testsuite/gdb.base/tls-dlobj.exp @@ -1,4 +1,4 @@ -# Copyright 2024 Free Software Foundation, Inc. +# Copyright 2024-2025 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or diff --git a/gdb/testsuite/gdb.base/tls-multiobj.c b/gdb/testsuite/gdb.base/tls-multiobj.c index 10e67da..dd4aadb 100644 --- a/gdb/testsuite/gdb.base/tls-multiobj.c +++ b/gdb/testsuite/gdb.base/tls-multiobj.c @@ -1,6 +1,6 @@ /* This testcase is part of GDB, the GNU debugger. - Copyright 2024 Free Software Foundation, Inc. + Copyright 2024-2025 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/gdb/testsuite/gdb.base/tls-multiobj.exp b/gdb/testsuite/gdb.base/tls-multiobj.exp index 97acb33..2a52610 100644 --- a/gdb/testsuite/gdb.base/tls-multiobj.exp +++ b/gdb/testsuite/gdb.base/tls-multiobj.exp @@ -1,4 +1,4 @@ -# Copyright 2024 Free Software Foundation, Inc. +# Copyright 2024-2025 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or diff --git a/gdb/testsuite/gdb.base/tls-multiobj1.c b/gdb/testsuite/gdb.base/tls-multiobj1.c index 86e7222..6207173 100644 --- a/gdb/testsuite/gdb.base/tls-multiobj1.c +++ b/gdb/testsuite/gdb.base/tls-multiobj1.c @@ -1,6 +1,6 @@ /* This testcase is part of GDB, the GNU debugger. - Copyright 2024 Free Software Foundation, Inc. + Copyright 2024-2025 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/gdb/testsuite/gdb.base/tls-multiobj2.c b/gdb/testsuite/gdb.base/tls-multiobj2.c index cea0709..9ff8b67 100644 --- a/gdb/testsuite/gdb.base/tls-multiobj2.c +++ b/gdb/testsuite/gdb.base/tls-multiobj2.c @@ -1,6 +1,6 @@ /* This testcase is part of GDB, the GNU debugger. - Copyright 2024 Free Software Foundation, Inc. + Copyright 2024-2025 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/gdb/testsuite/gdb.base/tls-multiobj3.c b/gdb/testsuite/gdb.base/tls-multiobj3.c index bb0f239..3594eba0 100644 --- a/gdb/testsuite/gdb.base/tls-multiobj3.c +++ b/gdb/testsuite/gdb.base/tls-multiobj3.c @@ -1,6 +1,6 @@ /* This testcase is part of GDB, the GNU debugger. - Copyright 2024 Free Software Foundation, Inc. + Copyright 2024-2025 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/gdb/testsuite/gdb.base/tls-nothreads.c b/gdb/testsuite/gdb.base/tls-nothreads.c index b3aaa33..cac20f8 100644 --- a/gdb/testsuite/gdb.base/tls-nothreads.c +++ b/gdb/testsuite/gdb.base/tls-nothreads.c @@ -1,6 +1,6 @@ /* This testcase is part of GDB, the GNU debugger. - Copyright 2024 Free Software Foundation, Inc. + Copyright 2024-2025 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/gdb/testsuite/gdb.base/tls-nothreads.exp b/gdb/testsuite/gdb.base/tls-nothreads.exp index 92a5cd9..105e686 100644 --- a/gdb/testsuite/gdb.base/tls-nothreads.exp +++ b/gdb/testsuite/gdb.base/tls-nothreads.exp @@ -1,4 +1,4 @@ -# Copyright 2024 Free Software Foundation, Inc. +# Copyright 2024-2025 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or diff --git a/gdb/testsuite/gdb.base/user-namespace-attach.c b/gdb/testsuite/gdb.base/user-namespace-attach.c new file mode 100644 index 0000000..684ce1c --- /dev/null +++ b/gdb/testsuite/gdb.base/user-namespace-attach.c @@ -0,0 +1,35 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include <sys/types.h> +#include <unistd.h> +#include <stdio.h> + +volatile int spin_p = 1; + +int +main () +{ + alarm (60); + + printf ("pid = %lld\n", ((long long) getpid ())); + + while (spin_p) + sleep (1); + + return 0; +} diff --git a/gdb/testsuite/gdb.base/user-namespace-attach.exp b/gdb/testsuite/gdb.base/user-namespace-attach.exp new file mode 100644 index 0000000..741093c --- /dev/null +++ b/gdb/testsuite/gdb.base/user-namespace-attach.exp @@ -0,0 +1,148 @@ +# Copyright 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Check that GDB can attach to a process started using 'unshare'. The +# inferior is started in a separate mnt namespace. + +require can_spawn_for_attach + +standard_testfile + +if {[prepare_for_testing "failed to prepare" $testfile $srcfile] == -1} { + return +} + +# This test relies (at least in some parts) on the sysroot being +# 'target:'. Grab the current sysroot now so we can skip those tests +# if the board file has changed the sysroot. +set sysroot "" +set test "show sysroot" +gdb_test_multiple $test $test { + -re -wrap "The current system root is \"(.*)\"\\." { + set sysroot $expect_out(1,string) + } +} + +# Start a process using 'unshare FLAGS', then attach to the process +# from GDB. Check that the attach worked as expected. +proc run_test { flags } { + + # If FLAGS contains '--mount' then a separate mnt namespace will + # be created, in which case the executable will have been read + # from the 'target:'. Otherwise, the executable will have been + # read from the local filesystem, and there will be no prefix. + # + # Of course, this only applies if the sysroot is 'target:', some + # boards change this, so skip these tests on those boards. + if { [lsearch -exact [split $flags " "] "--mount"] != -1 } { + if { $::sysroot ne "target:" } { + return + } + + set prefix "target:" + } else { + set prefix "" + } + + set unshare_cmd "unshare $flags" + + # Run '/bin/true' using UNSHARE_CMD. If the flags in UNSHARE_CMD + # aren't supported then this will fail, this means we shouldn't + # spawn the command with our test executable and try attaching. + # + # This will also fail if /bin/true isn't present, or doesn't work + # as we expect. But this should be fine for many targets. + set res [remote_exec target "$unshare_cmd /bin/true"] + if { [lindex $res 0] != 0 } { + unsupported "unshare flags not supported" + return + } + + set inferior_spawn_id \ + [spawn_wait_for_attach [list "$unshare_cmd $::binfile"]] + if { $inferior_spawn_id == -1 } { + unsupported "failed to spawn for attach" + return + } + + set inferior_pid [spawn_id_get_pid $inferior_spawn_id] + + clean_restart + + set saw_bad_warning false + gdb_test_multiple "attach $inferior_pid" "attach to inferior" { + -re "^attach $::decimal\r\n" { + exp_continue + } + + -re "^warning: \[^\r\n\]+: could not open as an executable file: \[^\r\n\]+\r\n" { + set saw_bad_warning true + exp_continue + } + + -re "^warning: \[^\r\n\]+: can't open to read symbols: \[^\r\n\]+\r\n" { + set saw_bad_warning true + exp_continue + } + + -re "^warning: Could not load vsyscall page because no executable was specified\r\n" { + # This warning is a secondary consequence of the above bad + # warnings, so don't count this as a bad warnings, ignore + # it instead. + exp_continue + } + + -re "^warning:\\s+$::decimal\\s*\[^\r\n\]+: No such file or directory\r\n" { + # This unrelated warning is seen when GDB stops in libc, + # and the source code for libc is not available. + exp_continue + } + + -re "^warning: \[^\r\n\]+\r\n" { + # If we ignore "other" warnings then, should the above + # warnings strings change we'll start ignoring the bad + # warnings, and the test will appear to pass. + # + # If you are seeing a warning here that really has nothing + # to do with the test failing, then the correct solution + # is to add a new regexp to specifically match _that_ + # warning, and ignore it. + set saw_bad_warning true + exp_continue + } + + -re "^$::gdb_prompt $" { + gdb_assert { !$saw_bad_warning } $gdb_test_name + } + + -re "^\[^\r\n\]*\r\n" { + exp_continue + } + } + + # Ensure GDB could access the executable. + set binfile_re [string_to_regexp $::binfile] + gdb_test "info inferiors" \ + "\r\n\\*\\s+$::decimal\\s+\[^\r\n\]+\\s+${prefix}${binfile_re}\\s*" +} + +set test_flags [list \ + "--mount --map-root-user" \ + "--user" \ + "--user --map-root-user"] + +foreach_with_prefix flags $test_flags { + run_test $flags +} diff --git a/gdb/testsuite/gdb.base/vfork-follow-parent.exp b/gdb/testsuite/gdb.base/vfork-follow-parent.exp index fca2993..8cb785d 100644 --- a/gdb/testsuite/gdb.base/vfork-follow-parent.exp +++ b/gdb/testsuite/gdb.base/vfork-follow-parent.exp @@ -19,6 +19,8 @@ # schedule-multiple on" or "set detach-on-fork on". Test these two resolution # methods. +require allow_fork_tests + standard_testfile .c vforked-prog.c set binfile ${testfile}-exit diff --git a/gdb/testsuite/gdb.base/watch-before-fork.exp b/gdb/testsuite/gdb.base/watch-before-fork.exp index 074cfbd..509561e 100644 --- a/gdb/testsuite/gdb.base/watch-before-fork.exp +++ b/gdb/testsuite/gdb.base/watch-before-fork.exp @@ -20,6 +20,8 @@ # This test uses "awatch". require allow_hw_watchpoint_access_tests +require allow_fork_tests + standard_testfile if {[build_executable "failed to prepare" $testfile $srcfile debug]} { diff --git a/gdb/testsuite/gdb.base/watch-vfork.exp b/gdb/testsuite/gdb.base/watch-vfork.exp index 1bc61bc..503727d 100644 --- a/gdb/testsuite/gdb.base/watch-vfork.exp +++ b/gdb/testsuite/gdb.base/watch-vfork.exp @@ -17,6 +17,8 @@ standard_testfile .c +require allow_fork_tests + if { [build_executable ${testfile}.exp ${testfile} $srcfile {debug}] } { untested "failed to compile" return -1 diff --git a/gdb/testsuite/gdb.base/watchpoint-hw-attach.exp b/gdb/testsuite/gdb.base/watchpoint-hw-attach.exp index b3892f3..fa63edb 100644 --- a/gdb/testsuite/gdb.base/watchpoint-hw-attach.exp +++ b/gdb/testsuite/gdb.base/watchpoint-hw-attach.exp @@ -26,29 +26,18 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} { return -1 } -if ![runto_main] { - return -1 -} +set test_spawn_id [spawn_wait_for_attach $binfile] +set testpid [spawn_id_get_pid $test_spawn_id] -# Run to the point where mypid in the test program has been -# populated. -gdb_breakpoint [gdb_get_line_number "pidacquired"] -gdb_continue_to_breakpoint "pidacquired" - -# Get the PID of the test process. -set testpid [get_integer_valueof "mypid" 0] +gdb_test "attach $testpid" "Attaching to program: .*, process $testpid.*" "attach once" gdb_test "detach" "Detaching from program: .*, process $testpid\r\n\\\[Inferior $decimal \\(process $testpid\\) detached\\\]" -if {$testpid == ""} { - return -1 -} - # A clean restart is needed to force the hardware watchpoint setup # logic to run post attach rather than post inferior launch. clean_restart $binfile -gdb_test "attach $testpid" "Attaching to program: .*, process $testpid.*" "attach" +gdb_test "attach $testpid" "Attaching to program: .*, process $testpid.*" "attach twice" # Ensure the test program is in the top frame so the required # variables are in scope. @@ -62,3 +51,5 @@ gdb_test "watch watched_variable" \ gdb_test "continue" \ "continue.*Continuing.*\.Hardware watchpoint $decimal: watched_variable.*Old value = 0.*New value = 4.*watched_variable\\);" + +kill_wait_spawned_process $test_spawn_id diff --git a/gdb/testsuite/gdb.base/watchpoint-unaligned.c b/gdb/testsuite/gdb.base/watchpoint-unaligned.c index d3c1349..ca2fa45 100644 --- a/gdb/testsuite/gdb.base/watchpoint-unaligned.c +++ b/gdb/testsuite/gdb.base/watchpoint-unaligned.c @@ -18,6 +18,8 @@ #include <stdint.h> #include <assert.h> +static volatile int volatile_dummy; + static int again; static volatile struct @@ -53,6 +55,40 @@ write_size8twice (void) data.u.size8twice[offset] = first; data.u.size8twice[offset + 1] = second; #endif + + /* Setting a breakpoint on an instruction after an instruction triggering a + watchpoint makes it ambiguous which one will be reported. + Insert a dummy instruction in between to make sure the watchpoint gets + reported. */ + volatile_dummy = 1; + + return; /* write_size8twice_return */ +} + +static void +read_size8twice (void) +{ + static uint64_t volatile first; + static uint64_t volatile second; + +#ifdef __aarch64__ + volatile void *p = &data.u.size8twice[offset]; + asm volatile ("ldp %0, %1, [%2]" + : "=r" (first), "=r" (second) /* output */ + : "r" (p) /* input */ + : /* clobber */); +#else + first = data.u.size8twice[offset]; + second = data.u.size8twice[offset + 1]; +#endif + + /* Setting a breakpoint on an instruction after an instruction triggering a + watchpoint makes it ambiguous which one will be reported. + Insert a dummy instruction inbetween to make sure the watchpoint gets + reported. */ + volatile_dummy = 1; + + return; /* read_size8twice_return */ } int @@ -63,6 +99,7 @@ main (void) assert (sizeof (data) == 8 + 3 * 8); write_size8twice (); + read_size8twice (); while (size) { diff --git a/gdb/testsuite/gdb.base/watchpoint-unaligned.exp b/gdb/testsuite/gdb.base/watchpoint-unaligned.exp index 9220402..85b1eb7 100644 --- a/gdb/testsuite/gdb.base/watchpoint-unaligned.exp +++ b/gdb/testsuite/gdb.base/watchpoint-unaligned.exp @@ -151,6 +151,63 @@ foreach_with_prefix wpcount {4 7} { gdb_assert $got_hit $test } +proc size8twice { function cmd offset index } { + clean_restart $::testfile + + if { ![runto $function] } { + return -1 + } + + # Set offset in the inferior. + gdb_test_no_output "set var offset = $offset" + + # Set a breakpoint. + set bp_src_string "${function}_return" + set bp_loc [gdb_get_line_number $bp_src_string] + gdb_breakpoint $bp_loc \ + "Breakpoint $::decimal at $::hex" "$bp_src_string" + + # Set a hardware watchpoint. + set watch_index [expr $offset + $index] + set test "$cmd data.u.size8twice\[$watch_index\]" + set wpnum 0 + gdb_test_multiple $test "" { + -re -wrap "Hardware (read )?watchpoint ($::decimal): .*" { + set wpnum $expect_out(2,string) + pass $gdb_test_name + } + -re -wrap "Watchpoint ($::decimal): .*" { + if {[istarget "arm*-*-*"]} { + untested $gdb_test_name + } else { + fail $gdb_test_name + } + } + } + + if { ! $wpnum } { + # No hardware watchpoint, we're done. + return 0 + } + + # Try to trigger the hardware watchpoint. + set got_hit 0 + gdb_test_multiple "continue" "" { + -re -wrap "\r\nCould not insert hardware watchpoint .*" { + } + -re -wrap "Hardware (read )?watchpoint $wpnum:.*(New value|Value) = .*" { + set got_hit 1 + send_gdb "continue\n" + exp_continue + } + -re -wrap " $bp_src_string .*" { + } + } + gdb_assert { $got_hit } + + return $got_hit +} + # We've got an array with 3 8-byte elements. Do a store of 16 bytes, # to: # - elements 0 and 1 (offset == 0), and @@ -158,49 +215,21 @@ foreach_with_prefix wpcount {4 7} { # For each case, check setting a watchpoint at: # - the first written element (index == 0), and # - the second element (index == 1). -foreach_with_prefix offset { 0 1 } { - foreach_with_prefix index { 0 1 } { - - clean_restart $binfile - - if ![runto_main] { - return -1 - } - - gdb_test_no_output "set var offset = $offset" - gdb_breakpoint [gdb_get_line_number "final_return"] \ - "Breakpoint $decimal at $hex" "final_return" - set watch_index [expr $offset + $index] - set test "watch data.u.size8twice\[$watch_index\]" - set wpnum 0 - gdb_test_multiple $test $test { - -re "Hardware watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" { - set wpnum $expect_out(1,string) - pass $gdb_test_name - } - -re "Watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" { - if {[istarget "arm*-*-*"]} { - untested $gdb_test_name - } else { - fail $gdb_test_name - } +foreach_with_prefix fun { write_size8twice read_size8twice } { + if { $fun == "write_size8twice" } { + set cmd "watch" + } else { + set cmd "rwatch" + } + foreach_with_prefix offset { 0 1 } { + foreach_with_prefix index { 0 1 } { + set res [size8twice $fun $cmd $offset $index] + if { $res != 1 } { + break } } - if {$wpnum} { - set test "continue" - set got_hit 0 - gdb_test_multiple $test $test { - -re "\r\nCould not insert hardware watchpoint .*\r\n$gdb_prompt $" { - } - -re "Hardware watchpoint $wpnum:.*New value = .*\r\n$gdb_prompt $" { - set got_hit 1 - send_gdb "continue\n" - exp_continue - } - -re " final_return .*\r\n$gdb_prompt $" { - } - } - gdb_assert $got_hit "size8twice write" + if { $res != 1 } { + break } } } diff --git a/gdb/testsuite/gdb.base/wchar.exp b/gdb/testsuite/gdb.base/wchar.exp index 70f738c..f0e4777 100644 --- a/gdb/testsuite/gdb.base/wchar.exp +++ b/gdb/testsuite/gdb.base/wchar.exp @@ -72,3 +72,7 @@ gdb_test "print repeat_p" "= $hex L\"A$cent$cent\"\.\.\." \ # From PR cli/14977, but here because it requires wchar_t. gdb_test "printf \"%ls\\n\", 0" "\\(null\\)" + +# From PR exp/33124 - a bug when converting escapes. +set wbs {L'\\'} +gdb_test "print $wbs" " = $decimal [string_to_regexp $wbs]" diff --git a/gdb/testsuite/gdb.btrace/multi-inferior.exp b/gdb/testsuite/gdb.btrace/multi-inferior.exp index ed2acb2..d87a941 100644 --- a/gdb/testsuite/gdb.btrace/multi-inferior.exp +++ b/gdb/testsuite/gdb.btrace/multi-inferior.exp @@ -24,6 +24,8 @@ require allow_btrace_tests +require allow_multi_inferior_tests + require !use_gdb_stub standard_testfile diff --git a/gdb/testsuite/gdb.cp/chained-calls.cc b/gdb/testsuite/gdb.cp/chained-calls.cc index 9d12c98..9358c71 100644 --- a/gdb/testsuite/gdb.cp/chained-calls.cc +++ b/gdb/testsuite/gdb.cp/chained-calls.cc @@ -23,6 +23,8 @@ public: S operator+ (const S &s); + int get (); + int a; }; @@ -41,6 +43,12 @@ S::operator+ (const S &s) return res; } +int +S::get () +{ + return a; +} + S f (int i) { @@ -162,6 +170,8 @@ public: U (type t); type get_type (); + int get (); + int a; char c; type tp[2]; @@ -191,6 +201,12 @@ U::get_type () } int +U::get () +{ + return a; +} + +int main () { int i = g(f(0)); @@ -198,6 +214,7 @@ main () B b = makeb (); C c; + int z = f (42).get (); return i + getb(b, 0); /* Break here */ } diff --git a/gdb/testsuite/gdb.cp/chained-calls.exp b/gdb/testsuite/gdb.cp/chained-calls.exp index 4f0597a..d34162c 100644 --- a/gdb/testsuite/gdb.cp/chained-calls.exp +++ b/gdb/testsuite/gdb.cp/chained-calls.exp @@ -42,3 +42,6 @@ gdb_test "p *c" ".* = {a = 5678}" "*c" gdb_test "p *c + *c" ".* = {a = 11356}" "*c + *c" gdb_test "p q(*c + *c)" ".* = {a = 11356}" "q(*c + *c)" gdb_test "p make_int().get_type ()" ".* = INT" "make_int().get_type ()" +gdb_test "p f(42).get()" " = 42" "f().get()" +gdb_test "ptype f(42).get()" "type = int" "ptype f().get()" +gdb_test "ptype make_int().get()" "type = int" "make_int().get()" diff --git a/gdb/testsuite/gdb.cp/cpexprs.exp.tcl b/gdb/testsuite/gdb.cp/cpexprs.exp.tcl index 1ac35af..5c3dfd6 100644 --- a/gdb/testsuite/gdb.cp/cpexprs.exp.tcl +++ b/gdb/testsuite/gdb.cp/cpexprs.exp.tcl @@ -28,17 +28,33 @@ proc test_breakpoint {func} { delete_breakpoints if { ! [gdb_breakpoint test_function] } { fail "set test_function breakpoint for $func" - } elseif { [gdb_test "continue" \ - "Continuing.\r\n\r\nBreakpoint $DEC+,.*test_function.*" \ - "continue to test_function for $func"] != 0 } { - } else { - gdb_breakpoint "$func" - set i [expr {[string last : $func] + 1}] - set efunc [string_to_regexp [string range $func $i end]] - gdb_test "continue" \ - "Continuing.\r\n\r\nBreakpoint $DEC+,.*$efunc.*" \ - "continue to $func" + return + } + + # Accept any input between "Continuing" and the breakpoint hit, as + # on Cygwin, we may see a "New Thread" notification. This is the + # Cygwin runtime spawning its own internal threads. + if { [gdb_test "continue" \ + "Continuing.\r\n.*Breakpoint $DEC+,.*test_function.*" \ + "continue to test_function for $func"] != 0 } { + return } + + # On some systems, the in-charge and not-in-charge dtors of a + # class may end up with the same address, so setting a breakpoint + # at a dtor like base::~base only finds one location. On other + # systems (e.g. Cygwin), the two dtors for the same class may have + # different addresses, so we find two locations for the + # breakpoint. Thus, expect that the breakpoint hit may or may not + # report a location number. + set bp_re "$DEC+(\.$DEC+)?" + + gdb_breakpoint "$func" + set i [expr {[string last : $func] + 1}] + set efunc [string_to_regexp [string range $func $i end]] + gdb_test "continue" \ + "Continuing.\r\n.*Breakpoint $bp_re,.*$efunc.*" \ + "continue to $func" } # Add a function to the list of tested functions diff --git a/gdb/testsuite/gdb.cp/method-ref-return.cc b/gdb/testsuite/gdb.cp/method-ref-return.cc new file mode 100644 index 0000000..4169bfe --- /dev/null +++ b/gdb/testsuite/gdb.cp/method-ref-return.cc @@ -0,0 +1,42 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +/* Test that we can access class method/data member via reference. */ + +struct foo +{ + foo () : m_a (42) {} + int get_a () const { return m_a; } + int m_a; +}; + +struct bar +{ + bar () : m_foo () {} + const foo &get_foo () const { return m_foo; } + foo m_foo; +}; + +int +main (int argc, char *argv[]) +{ + bar b; + const foo &ref = b.get_foo (); + int ret = ref.m_a; // breakpoint here + ret += ref.get_a (); + return ret; +}
\ No newline at end of file diff --git a/gdb/testsuite/gdb.cp/method-ref-return.exp b/gdb/testsuite/gdb.cp/method-ref-return.exp new file mode 100644 index 0000000..1ac5ac9 --- /dev/null +++ b/gdb/testsuite/gdb.cp/method-ref-return.exp @@ -0,0 +1,70 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test calling methods and accessing members via reference. + +require allow_cplus_tests + +standard_testfile .cc + +if {[prepare_for_testing "failed to prepare" $testfile $srcfile {debug c++}]} { + return -1 +} + +if {![runto_main]} { + return -1 +} + +# Set a breakpoint after the bar object is created and the reference is obtained. +gdb_breakpoint [gdb_get_line_number "breakpoint here"] +gdb_continue_to_breakpoint "after reference assignment" + +# Test that we can call the method through reference and get the expected result. +gdb_test_multiple "print b.get_foo()" "print method call returning reference" { + -re "\\$\[0-9\]+ = \\(const foo &\\) @$hex: \\{m_a = 42\\}\r\n$gdb_prompt $" { + pass $gdb_test_name + } + -re "Could not validate memory tag: Value can't be converted to integer\\." { + fail "$gdb_test_name" + } +} + +# Test accessing the member through the reference. +gdb_test "print b.get_foo ().m_a" \ + "\\$\[0-9\]+ = 42" \ + "print member access through reference" + +# Test calling method on the referenced object. +gdb_test "print b.get_foo ().get_a()" \ + "\\$\[0-9\]+ = 42" \ + "print method call on referenced object" + +# Test that the stored reference works correctly. +gdb_test_multiple "print ref" "print stored reference" { + -re "\\$\[0-9\]+ = \\(const foo &\\) @$hex: \\{m_a = 42\\}\r\n$gdb_prompt $" { + pass $gdb_test_name + } + -re "Could not validate memory tag: Value can't be converted to integer\\." { + fail "$gdb_test_name" + } +} + +gdb_test "print ref.m_a" \ + "\\$\[0-9\]+ = 42" \ + "print member through stored reference" + +gdb_test "print ref.get_a()" \ + "\\$\[0-9\]+ = 42" \ + "print method call through stored reference"
\ No newline at end of file diff --git a/gdb/testsuite/gdb.cp/static-print-quit.exp b/gdb/testsuite/gdb.cp/static-print-quit.exp index 8e0b61d..e4bce7f 100644 --- a/gdb/testsuite/gdb.cp/static-print-quit.exp +++ b/gdb/testsuite/gdb.cp/static-print-quit.exp @@ -27,32 +27,17 @@ clean_restart $testfile.o gdb_test_no_output "set width 80" gdb_test_no_output "set height 2" -set test "print c - <return>" -gdb_test_multiple "print c" $test { - -re "\\$\[0-9\]+ = \{loooooooooooooooooooooooooooooooooooooooooooooong = 0, static field = \{\r\n--Type <RET>" { - pass $test +gdb_test_multiple "print c" "" { + -re "\\$\[0-9\]+ = \{loooooooooooooooooooooooooooooooooooooooooooooong = 0, static field = \{\r\n$pagination_prompt$" { + pass $gdb_test_name } - -re "\r\n--Type <RET>" { + -re "\r\n$pagination_prompt$" { # gdb-7.1 did not crash with this testcase but it had the same bug. untested "bug does not reproduce" return 0 } } -set test "print c - q <return>" -gdb_test_multiple "" $test { - -re " for more, q to quit, " { - pass $test - } -} - -set test "print c - remainder" -gdb_test_multiple "" $test { - -re "c to continue without paging--$" { - pass $test - } -} - gdb_test "q" ".*" # Now the obstack is uninitialized. Exercise it. diff --git a/gdb/testsuite/gdb.dap/attach.exp b/gdb/testsuite/gdb.dap/attach.exp index 37e867c..5e1f634 100644 --- a/gdb/testsuite/gdb.dap/attach.exp +++ b/gdb/testsuite/gdb.dap/attach.exp @@ -33,11 +33,11 @@ set attach_id [dap_attach $testpid $binfile] dap_check_request_and_response "configurationDone" configurationDone +dap_check_response "attach response" attach $attach_id + dap_wait_for_event_and_check "stopped" stopped \ "body reason" attach -dap_check_response "attach response" attach $attach_id - dap_shutdown true kill_wait_spawned_process $test_spawn_id diff --git a/gdb/testsuite/gdb.dap/log-message.exp b/gdb/testsuite/gdb.dap/log-message.exp index 421df14..cce367d 100644 --- a/gdb/testsuite/gdb.dap/log-message.exp +++ b/gdb/testsuite/gdb.dap/log-message.exp @@ -40,6 +40,15 @@ set obj [dap_check_request_and_response "set breakpoint" \ [list s $srcfile] $line]] set fn_bpno [dap_get_breakpoint_number $obj] +set eol {\n} +dap_wait_for_event_and_check "set breakpoint output, part 1" output \ + {body category} stdout \ + {body output} "No source file named log-message.c.$eol" + +dap_wait_for_event_and_check "set breakpoint output, part 2" output \ + {body category} stdout \ + {body output} "Breakpoint 1 (-source log-message.c -line $line) pending.$eol" + dap_check_request_and_response "configurationDone" configurationDone dap_check_response "launch response" launch $launch_id diff --git a/gdb/testsuite/gdb.dap/scopes.c b/gdb/testsuite/gdb.dap/scopes.c index d8929f1..2a1d76c 100644 --- a/gdb/testsuite/gdb.dap/scopes.c +++ b/gdb/testsuite/gdb.dap/scopes.c @@ -27,6 +27,8 @@ int main () static int scalar = 23; + void *ptr = (void *) &scalar; + { const char *inner = "inner block"; diff --git a/gdb/testsuite/gdb.dap/scopes.exp b/gdb/testsuite/gdb.dap/scopes.exp index 59d344b..52efa68 100644 --- a/gdb/testsuite/gdb.dap/scopes.exp +++ b/gdb/testsuite/gdb.dap/scopes.exp @@ -70,7 +70,8 @@ lassign $scopes scope reg_scope gdb_assert {[dict get $scope name] == "Locals"} "scope is locals" gdb_assert {[dict get $scope presentationHint] == "locals"} \ "locals presentation hint" -gdb_assert {[dict get $scope namedVariables] == 3} "three vars in scope" +set count [dict get $scope namedVariables] +gdb_assert {$count == 4} "four vars in scope" gdb_assert {[dict get $reg_scope name] == "Registers"} \ "second scope is registers" @@ -89,8 +90,8 @@ set refs1 [lindex [dap_check_request_and_response "fetch variables 0,1" \ set refs2 [lindex [dap_check_request_and_response "fetch variables 2" \ "variables" \ [format {o variablesReference [i %d] \ - start [i 2] count [i 1]} \ - $num]] \ + start [i 2] count [i %d]} \ + $num [expr {$count - 2}]]] \ 0] set vars [concat [dict get $refs1 body variables] \ @@ -115,6 +116,10 @@ foreach var $vars { "scalar" { gdb_assert {[dict get $var value] == 23} "check value of scalar" } + "ptr" { + gdb_assert {[dict get $var memoryReference] != ""} \ + "check memoryReference of ptr" + } default { fail "unknown variable $name" } @@ -128,11 +133,38 @@ set refs [lindex [dap_check_request_and_response "fetch contents of dei" \ set deivals [dict get $refs body variables] gdb_assert {[llength $deivals] == 2} "dei has two members" +# Request more children than exist. See PR dap/33228. +set seq [dap_send_request variables \ + [format {o variablesReference [i %d] count [i 100]} $dei_ref]] +lassign [dap_read_response variables $seq] response ignore +gdb_assert {[dict get $response success] == "false"} \ + "variables with invalid count" + set num [dict get $reg_scope variablesReference] -# The request succeeding is sufficient. -set val [dap_check_request_and_response "fetch first register" \ +lassign [dap_check_request_and_response "fetch all registers" \ "variables" \ - [format {o variablesReference [i %d] count [i 1]} $num]] + [format {o variablesReference [i %d] count [i %d]} $num\ + [dict get $reg_scope namedVariables]]] \ + val events + +# If any register has children, try to fetch those as well. This is a +# regression test for part of PR dap/33228. +foreach var [dict get $val body variables] { + set regvar [dict get $var variablesReference] + if {$regvar > 0} { + # If variablesReference is non-zero, then there must be either + # named or indexed children. + if {[dict exists $var namedVariables]} { + set n [dict get $var namedVariables] + } else { + set n [dict get $var indexedVariables] + } + + dap_check_request_and_response "fetch register children for $regvar" \ + "variables" \ + [format {o variablesReference [i %d] count [i %d]} $regvar $n] + } +} set num [dict get $scope variablesReference] set refs [lindex [dap_check_request_and_response "set variable scalar" \ diff --git a/gdb/testsuite/gdb.dap/threads.c b/gdb/testsuite/gdb.dap/threads.c new file mode 100644 index 0000000..168f044 --- /dev/null +++ b/gdb/testsuite/gdb.dap/threads.c @@ -0,0 +1,67 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2019-2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <pthread.h> + +#define NUM 2 + +static pthread_barrier_t threads_started_barrier; + +static void * +thread_function (void *arg) +{ + pthread_barrier_wait (&threads_started_barrier); + + while (1) + sleep (1); + + pthread_exit (NULL); +} + +static void +all_started (void) +{ +} + +int +main () +{ + pthread_t threads[NUM]; + long i; + + pthread_barrier_init (&threads_started_barrier, NULL, NUM + 1); + + for (i = 1; i <= NUM; i++) + { + int res; + + res = pthread_create (&threads[i - 1], NULL, thread_function, NULL); + } + + pthread_barrier_wait (&threads_started_barrier); + + all_started (); + + printf ("sleeping\n"); + fflush (stdout); + sleep (180); + + exit (EXIT_SUCCESS); +} diff --git a/gdb/testsuite/gdb.dap/threads.exp b/gdb/testsuite/gdb.dap/threads.exp new file mode 100644 index 0000000..c91d107 --- /dev/null +++ b/gdb/testsuite/gdb.dap/threads.exp @@ -0,0 +1,81 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test DAP "threads" request. + +require allow_shlib_tests allow_dap_tests + +load_lib dap-support.exp + +standard_testfile + +set libname $testfile-solib +set srcfile_lib $srcdir/$subdir/$libname.c +set binfile_lib [standard_output_file $libname.so] + +if {[build_executable "failed to prepare" $testfile $srcfile \ + {debug pthreads}] == -1} { + return +} + +if {[dap_initialize] == ""} { + return +} + +set launch_id [dap_launch $testfile] + +set obj [dap_check_request_and_response "set breakpoint on all_started function" \ + setFunctionBreakpoints \ + {o breakpoints [a [o name [s all_started]]]}] +set fn_bpno [dap_get_breakpoint_number $obj] + +dap_check_request_and_response "configurationDone" configurationDone + +dap_check_response "launch response" launch $launch_id + +lassign [dap_wait_for_event_and_check "stopped at function breakpoint" \ + stopped \ + "body reason" breakpoint \ + "body hitBreakpointIds" $fn_bpno] \ + ignore \ + all_events + +# Verify that we saw the correct number of thread events. +set count 0 +foreach event $all_events { + if {[dict get $event type] == "event" + && [dict get $event event] == "thread" + && [dict get $event body reason] == "started"} { + incr count + } +} +gdb_assert {$count == 3} "correct number of thread events" + +dap_check_request_and_response "continue" continue \ + {o threadId [i 1]} + +# Make sure that the inferior has really re-started -- note that there +# is no "continue" event, because the "continue" request suppresses +# those. +dap_wait_for_event_and_check "output from inferior" output \ + {body output} "sleeping\\n" + +lassign [dap_check_request_and_response "threads request" threads] \ + response ignore + +gdb_assert {[llength [dict get $response body threads]] == 3} \ + "correct number of threads" + +dap_shutdown true diff --git a/gdb/testsuite/gdb.debuginfod/build-id-no-debug-warning.exp b/gdb/testsuite/gdb.debuginfod/build-id-no-debug-warning.exp index 93f8f92..35bb401 100644 --- a/gdb/testsuite/gdb.debuginfod/build-id-no-debug-warning.exp +++ b/gdb/testsuite/gdb.debuginfod/build-id-no-debug-warning.exp @@ -46,7 +46,7 @@ set build_id_debug_file \ [standard_output_file [build_id_debug_filename_get $binfile]] # Get the BINFILE.debug filename. This is the file we should be -# moving to the BUILD_ID_DEBUG_FILE location, but we wont, we're going +# moving to the BUILD_ID_DEBUG_FILE location, but we won't, we're going # to move something else there instead. set debugfile [standard_output_file "${binfile}.debug"] diff --git a/gdb/testsuite/gdb.debuginfod/corefile-mapped-file.exp b/gdb/testsuite/gdb.debuginfod/corefile-mapped-file.exp index 78fa252..dac4e6c 100644 --- a/gdb/testsuite/gdb.debuginfod/corefile-mapped-file.exp +++ b/gdb/testsuite/gdb.debuginfod/corefile-mapped-file.exp @@ -49,7 +49,7 @@ # # This obviously needs fixing, but is a separate problem from the one being # tested here, so this test deliberately checks the mapping using a file that -# is mmaped rather than loaded as a shared library, as such the file is in the +# is mmapped rather than loaded as a shared library, as such the file is in the # core-files list of mapped files, but is not in the shared library list. # # Despite this test living in the gdb.debuginfod/ directory, only the last @@ -260,7 +260,7 @@ proc load_core_file { testname { line_re "" } } { # We expect RES to be 2 (TCL_RETURN) or 1 (TCL_ERROR). If we get # here then somehow the 'catch' above finished without hitting # either of those cases, which is .... weird. - perror "unexepcted return value, code = $res, value = $string" + perror "unexpected return value, code = $res, value = $string" return -1 } } diff --git a/gdb/testsuite/gdb.debuginfod/solib-with-soname.exp b/gdb/testsuite/gdb.debuginfod/solib-with-soname.exp index 9f1842c..1008e46 100644 --- a/gdb/testsuite/gdb.debuginfod/solib-with-soname.exp +++ b/gdb/testsuite/gdb.debuginfod/solib-with-soname.exp @@ -89,7 +89,7 @@ if {[lindex $status 0] != 0} { } # Build the executable. This links against libfoo.so, which is -# poining at libfoo_1.so. Just to confuse things even more, this +# pointing at libfoo_1.so. Just to confuse things even more, this # executable uses dlopen to load libfoo_2.so. Weird! if { [build_executable "build executable" ${binfile} ${srcfile2} \ [list debug shlib=${library_filename} shlib_load]] == -1 } { diff --git a/gdb/testsuite/gdb.dwarf2/ada-array-bound.c b/gdb/testsuite/gdb.dwarf2/ada-array-bound.c new file mode 100644 index 0000000..5a7d397 --- /dev/null +++ b/gdb/testsuite/gdb.dwarf2/ada-array-bound.c @@ -0,0 +1,29 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +/* The data used for the structure. */ + +unsigned char our_data[] = { 3, 7, 11, 13 }; + +/* Dummy main function. */ + +int +main() +{ + asm ("main_label: .globl main_label"); + return 0; +} diff --git a/gdb/testsuite/gdb.dwarf2/ada-array-bound.exp b/gdb/testsuite/gdb.dwarf2/ada-array-bound.exp new file mode 100644 index 0000000..f48df7b --- /dev/null +++ b/gdb/testsuite/gdb.dwarf2/ada-array-bound.exp @@ -0,0 +1,89 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test handling of an array type whose bound comes from the field of a +# structure. + +load_lib dwarf.exp + +# This test can only be run on targets which support DWARF-2 and use gas. +require dwarf2_support + +standard_testfile .c -debug.S + +# Set up the DWARF for the test. + +set asm_file [standard_output_file $srcfile2] +Dwarf::assemble $asm_file { + global srcdir subdir srcfile + + cu {} { + DW_TAG_compile_unit { + {DW_AT_language @DW_LANG_Ada95} + {DW_AT_name $srcfile} + } { + declare_labels byte array disc struct + + byte: DW_TAG_base_type { + {DW_AT_byte_size 1 DW_FORM_sdata} + {DW_AT_encoding @DW_ATE_unsigned} + {DW_AT_name byte} + } + + array: DW_TAG_array_type { + {DW_AT_name array_type} + {DW_AT_type :$byte} + } { + DW_TAG_subrange_type { + {DW_AT_type :$byte} + {DW_AT_upper_bound :$disc} + } + } + + struct: DW_TAG_structure_type { + {DW_AT_name discriminated} + {DW_AT_byte_size 4 DW_FORM_sdata} + } { + disc: DW_TAG_member { + {DW_AT_name disc} + {DW_AT_type :$byte} + {DW_AT_data_member_location 0 DW_FORM_sdata} + } + DW_TAG_member { + {DW_AT_name nums} + {DW_AT_type :$array} + {DW_AT_data_member_location 1 DW_FORM_sdata} + } + } + + DW_TAG_variable { + {DW_AT_name "value"} + {DW_AT_type :$struct} + {DW_AT_external 1 DW_FORM_flag} + {DW_AT_location {DW_OP_addr [gdb_target_symbol "our_data"]} + SPECIAL_expr} + } + } + } +} + +if { [prepare_for_testing "failed to prepare" ${testfile} \ + [list $srcfile $asm_file] {nodebug}] } { + return -1 +} + +gdb_test_no_output "set language ada" +gdb_test "print value" \ + [string_to_regexp " = (disc => 3, nums => (7, 11, 13))"] diff --git a/gdb/testsuite/gdb.dwarf2/debug-names-non-ascending-cu.exp b/gdb/testsuite/gdb.dwarf2/debug-names-non-ascending-cu.exp deleted file mode 100644 index d86b5c4..0000000 --- a/gdb/testsuite/gdb.dwarf2/debug-names-non-ascending-cu.exp +++ /dev/null @@ -1,81 +0,0 @@ -# Copyright 2022-2025 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -load_lib dwarf.exp - -# This test can only be run on targets which support DWARF-2 and use gas. -require dwarf2_support - -standard_testfile _start.c debug-names.S - -set func_info_vars \ - [get_func_info _start [list debug additional_flags=-nostartfiles]] - -# Create the DWARF. -set asm_file [standard_output_file $srcfile2] -Dwarf::assemble { - filename $asm_file - add_dummy_cus 0 -} { - global func_info_vars - foreach var $func_info_vars { - global $var - } - - cu { label cu_label } { - compile_unit {{language @DW_LANG_C}} { - subprogram { - {DW_AT_name _start} - {DW_AT_low_pc $_start_start DW_FORM_addr} - {DW_AT_high_pc $_start_end DW_FORM_addr} - } - } - } - - cu { label cu_label_2 } { - compile_unit {{language @DW_LANG_C}} { - base_type { - {name int} - {byte_size 4 sdata} - {encoding @DW_ATE_signed} - } - } - } - - debug_names {} { - cu cu_label_2 - cu cu_label - name _start subprogram cu_label 0xEDDB6232 - name int base_type cu_label 0xB888030 - } -} - -if [prepare_for_testing "failed to prepare" $testfile "${asm_file} ${srcfile}" \ - [list additional_flags=-nostartfiles]] { - return -1 -} - -# Check for warning. -set re \ - [list \ - "warning:" \ - "Section .debug_names has incorrect entry in CU table," \ - "ignoring .debug_names."] -set re [join $re] -gdb_assert {[regexp $re $gdb_file_cmd_msg]} "warning" - -# Verify that .debug_names section is ignored. -set index [have_index $binfile] -gdb_assert { [string equal $index ""] } ".debug_names not used" diff --git a/gdb/testsuite/gdb.dwarf2/dw-form-ref-addr-with-type-units.exp b/gdb/testsuite/gdb.dwarf2/dw-form-ref-addr-with-type-units.exp new file mode 100644 index 0000000..6253629 --- /dev/null +++ b/gdb/testsuite/gdb.dwarf2/dw-form-ref-addr-with-type-units.exp @@ -0,0 +1,109 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# This is a reproducer for PR 29518: +# +# https://sourceware.org/bugzilla/show_bug.cgi?id=29518 +# +# The root cause for the problem was that function +# dwarf2_find_containing_comp_unit was searching the whole "all_units" vector, +# containing both compile units and type units, causing it to sometimes +# erroneously return a type unit. It should have been restricted to searching +# compile units. +# +# To get dwarf2_find_containing_comp_unit to be called and reproduce the +# original bug, we need a value with form DW_FORM_ref_addr pointing to a +# different compile unit. This is produced by `%$int_type` below. + +load_lib dwarf.exp +require dwarf2_support +standard_testfile main.c .S + +set asm_file [standard_output_file $srcfile2] + +Dwarf::assemble $asm_file { + global srcfile + declare_labels int_type + + # The source CU. + cu {version 4} { + compile_unit { + } { + subprogram { + {MACRO_AT_func {main}} + {type %$int_type} + } + } + } + + # Create a bunch of empty / dummy CUs, to make the offset of int_type a bit + # higher. + for {set i 1} {$i < 10} {incr i} { + cu {version 4} { + compile_unit {} {} + } + } + + # The target CU. + cu {version 4} { + compile_unit { + } { + int_type: DW_TAG_base_type { + {DW_AT_byte_size 4 DW_FORM_sdata} + {DW_AT_encoding @DW_ATE_signed} + {DW_AT_name int} + } + } + } + + # Create many TUs. + # + # We need enough type units in the "all_units" vector in order to steer the + # binary search in dwarf2_find_containing_comp_unit towards the type units + # region of the array. + for {set i 1} {$i < 20} {incr i} { + tu {version 4} $i the_type_i { + type_unit {} { + declare_labels dummy_int_type + + the_type_i: structure_type { + {name s} + {byte_size 4 sdata} + } { + member { + {name i} + {type :$dummy_int_type} + } + } + + dummy_int_type: base_type { + {name int} + {encoding @DW_ATE_signed} + {byte_size 4 sdata} + } + } + } + } +} + +if { [prepare_for_testing "failed to prepare" ${testfile} \ + [list $srcfile $asm_file] {nodebug}] } { + return -1 +} + +# Without the corresponding fix, we get an internal error: +# +# gdb/dwarf2/read.c:3940: internal-error: load_full_comp_unit: Assertion `! this_cu->is_debug_types' failed. +gdb_test "p main" " = {int \\(void\\)} $hex <main>" diff --git a/gdb/testsuite/gdb.dwarf2/dw-form-strx-out-of-bounds.exp b/gdb/testsuite/gdb.dwarf2/dw-form-strx-out-of-bounds.exp index f2123fa..cb24b19 100644 --- a/gdb/testsuite/gdb.dwarf2/dw-form-strx-out-of-bounds.exp +++ b/gdb/testsuite/gdb.dwarf2/dw-form-strx-out-of-bounds.exp @@ -18,7 +18,13 @@ # Out of bounds index. set int_str_idx 1 +# With readnow, the dwarf error is printed during the file command, so skip +# the test. +require !readnow + +set prepare_for_testing_done 0 source $srcdir/$subdir/dw-form-strx.exp.tcl +require {expr $prepare_for_testing_done == 1} set re_dwarf_error \ [string_list_to_regexp \ diff --git a/gdb/testsuite/gdb.dwarf2/dw-form-strx.exp b/gdb/testsuite/gdb.dwarf2/dw-form-strx.exp index 9b62edf..3f739c4 100644 --- a/gdb/testsuite/gdb.dwarf2/dw-form-strx.exp +++ b/gdb/testsuite/gdb.dwarf2/dw-form-strx.exp @@ -18,6 +18,8 @@ # Correct index. set int_str_idx 0 +set prepare_for_testing_done 0 source $srcdir/$subdir/dw-form-strx.exp.tcl +require {expr $prepare_for_testing_done == 1} gdb_test "ptype global_var" "type = int" diff --git a/gdb/testsuite/gdb.dwarf2/dw-form-strx.exp.tcl b/gdb/testsuite/gdb.dwarf2/dw-form-strx.exp.tcl index 15cfe27..bc5a654 100644 --- a/gdb/testsuite/gdb.dwarf2/dw-form-strx.exp.tcl +++ b/gdb/testsuite/gdb.dwarf2/dw-form-strx.exp.tcl @@ -24,15 +24,15 @@ set asm_file [standard_output_file $srcfile2] # Debug info in the main file. Dwarf::assemble $asm_file { - declare_labels base_offset + declare_labels base_offset_cu1 - debug_str_offsets base_offset int + debug_str_offsets { base_offset base_offset_cu1 } int cu { version 5 } { DW_TAG_compile_unit { - {DW_AT_str_offsets_base $base_offset sec_offset} + {DW_AT_str_offsets_base $base_offset_cu1 sec_offset} } { declare_labels int4_type @@ -56,5 +56,9 @@ Dwarf::assemble $asm_file { if { [prepare_for_testing "failed to prepare" ${testfile} \ [list $srcfile $asm_file] {nodebug}] } { - return -1 + return } + +# Let includers know prepare_for_testing was done, without having to check +# source return status. +set prepare_for_testing_done 1 diff --git a/gdb/testsuite/gdb.dwarf2/dw2-modula2-self-type.S b/gdb/testsuite/gdb.dwarf2/dw2-modula2-self-type.S index c09c6db..06a93ac 100644 --- a/gdb/testsuite/gdb.dwarf2/dw2-modula2-self-type.S +++ b/gdb/testsuite/gdb.dwarf2/dw2-modula2-self-type.S @@ -114,7 +114,11 @@ die221: .byte 0x0 - .section .debug_str +#ifdef __arm__ + .section .debug_str,"MS",%progbits,1 +#else + .section .debug_str,"MS",@progbits,1 +#endif .LASF1: .string "2.mod" .LASF0: diff --git a/gdb/testsuite/gdb.dwarf2/dw2-ranges-psym-warning.exp b/gdb/testsuite/gdb.dwarf2/dw2-ranges-psym-warning.exp index ea0fc03..6120878 100644 --- a/gdb/testsuite/gdb.dwarf2/dw2-ranges-psym-warning.exp +++ b/gdb/testsuite/gdb.dwarf2/dw2-ranges-psym-warning.exp @@ -117,7 +117,7 @@ if ![runto_main] { # the hole is there in the symbol table, but not the partial symbol table, # we run into: # (gdb) bt -# warning: (Internal error: pc 0x555555554619 in read in psymtab, \ +# warning: (Internal error: pc 0x555555554619 in read in psymtab, # but not in symtab.) # ... # (gdb) diff --git a/gdb/testsuite/gdb.dwarf2/dw2-simple-locdesc.S b/gdb/testsuite/gdb.dwarf2/dw2-simple-locdesc.S index cd999f4..551dda7 100644 --- a/gdb/testsuite/gdb.dwarf2/dw2-simple-locdesc.S +++ b/gdb/testsuite/gdb.dwarf2/dw2-simple-locdesc.S @@ -160,7 +160,11 @@ d: .byte 0 .byte 0 .byte 0 - .section .debug_str +#ifdef __arm__ + .section .debug_str,"MS",%progbits,1 +#else + .section .debug_str,"MS",@progbits,1 +#endif .LASF2: .string "GNU C 4.7.0 20110727 (experimental)" .LASF0: diff --git a/gdb/testsuite/gdb.dwarf2/dw2-strp.S b/gdb/testsuite/gdb.dwarf2/dw2-strp.S index c7ede95..db3e64f 100644 --- a/gdb/testsuite/gdb.dwarf2/dw2-strp.S +++ b/gdb/testsuite/gdb.dwarf2/dw2-strp.S @@ -163,7 +163,11 @@ .byte 0x0 /* Terminator */ /* String table */ - .section .debug_str +#ifdef __arm__ + .section .debug_str,"MS",%progbits,1 +#else + .section .debug_str,"MS",@progbits,1 +#endif .Lproducer: .string "GNU C 3.3.3" .Lchar_str: diff --git a/gdb/testsuite/gdb.dwarf2/dynamic-bit-offset.exp b/gdb/testsuite/gdb.dwarf2/dynamic-bit-offset.exp new file mode 100644 index 0000000..f4e02da --- /dev/null +++ b/gdb/testsuite/gdb.dwarf2/dynamic-bit-offset.exp @@ -0,0 +1,95 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test DW_AT_data_bit_offset with an expression. This is a DWARF +# extension, but expected to be in DWARF 6. See +# https://dwarfstd.org/issues/250501.1.html + +load_lib dwarf.exp + +# This test can only be run on targets which support DWARF-2 and use gas. +require dwarf2_support + +standard_testfile ada-array-bound.c -debug.S + +# Set up the DWARF for the test. + +set asm_file [standard_output_file $srcfile2] +Dwarf::assemble $asm_file { + global srcdir subdir srcfile + + cu {} { + DW_TAG_compile_unit { + {DW_AT_language @DW_LANG_Ada95} + {DW_AT_name $srcfile} + } { + declare_labels byte array struct + + byte: DW_TAG_base_type { + {DW_AT_byte_size 1 DW_FORM_sdata} + {DW_AT_encoding @DW_ATE_unsigned} + {DW_AT_name byte} + } + + array: DW_TAG_array_type { + {DW_AT_name array_type} + {DW_AT_type :$byte} + } { + DW_TAG_subrange_type { + {DW_AT_type :$byte} + {DW_AT_upper_bound 3 DW_FORM_sdata} + } + } + + struct: DW_TAG_structure_type { + {DW_AT_name discriminated} + {DW_AT_byte_size 4 DW_FORM_sdata} + } { + DW_TAG_member { + {DW_AT_name disc} + {DW_AT_type :$byte} + {DW_AT_data_member_location 0 DW_FORM_sdata} + } + + # We know this is always at offset 1 but use an + # expression just to test this code path. This is a + # DWARF extension. See + # https://dwarfstd.org/issues/250501.1.html. + DW_TAG_member { + {DW_AT_name nums} + {DW_AT_type :$array} + {DW_AT_data_bit_offset {DW_OP_lit8} SPECIAL_expr} + } + } + + DW_TAG_variable { + {DW_AT_name "value"} + {DW_AT_type :$struct} + {DW_AT_external 1 DW_FORM_flag} + {DW_AT_location {DW_OP_addr [gdb_target_symbol "our_data"]} + SPECIAL_expr} + } + } + } +} + +if {[prepare_for_testing "failed to prepare" ${testfile} \ + [list $srcfile $asm_file] {nodebug}]} { + return -1 +} + +gdb_test_no_output "set language ada" +gdb_test "print value" \ + [string_to_regexp " = (disc => 3, nums => (7, 11, 13))"] diff --git a/gdb/testsuite/gdb.dwarf2/fission-dw-form-strx.exp b/gdb/testsuite/gdb.dwarf2/fission-dw-form-strx.exp new file mode 100644 index 0000000..4f5867c --- /dev/null +++ b/gdb/testsuite/gdb.dwarf2/fission-dw-form-strx.exp @@ -0,0 +1,88 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Check support for a DW_FORM_strx attribute in a dwo file. + +load_lib dwarf.exp + +# This test can only be run on targets which support DWARF-2 and use gas. +require dwarf2_support + +standard_testfile main.c -dw.S -dwo.S + +set main_asm_file [standard_output_file $srcfile2] +set dwo_asm_file [standard_output_file $srcfile3] + +# Debug info in the main file. +Dwarf::assemble $main_asm_file { + cu { + version 5 + dwo_id 0xF00D + } { + compile_unit { + {DW_AT_dwo_name ${::gdb_test_file_name}.dwo DW_FORM_strp} + } {} + } +} + +# Debug info in the DWO file. +Dwarf::assemble $dwo_asm_file { + debug_str_offsets { dwo 1 } int + + cu { + fission 1 + version 5 + dwo_id 0xF00D + } { + compile_unit {} { + declare_labels int4_type + + int4_type: DW_TAG_base_type { + {DW_AT_byte_size 4 DW_FORM_sdata} + {DW_AT_encoding @DW_ATE_signed} + {DW_AT_name 0 DW_FORM_strx_id} + } + + DW_TAG_variable { + {DW_AT_name global_var} + {DW_AT_type :$int4_type} + {DW_AT_location { + DW_OP_const1u 12 + DW_OP_stack_value + } SPECIAL_expr} + } + } + } +} + +# Build main file. +if { [build_executable "${testfile}.exp" $binfile \ + [list ${srcfile} ${main_asm_file}] {nodebug}] } { + return +} + +# Build DWO file. +set dwo_file [standard_output_file ${testfile}.dwo] +if { [gdb_compile_shlib $dwo_asm_file $dwo_file nodebug] != "" } { + return +} + +if { [is_remote host] } { + gdb_remote_download host $dwo_file +} + +clean_restart $binfile + +gdb_test "ptype global_var" "type = int" diff --git a/gdb/testsuite/gdb.dwarf2/pr11465.S b/gdb/testsuite/gdb.dwarf2/pr11465.S index fed98bc..f3f2c57 100644 --- a/gdb/testsuite/gdb.dwarf2/pr11465.S +++ b/gdb/testsuite/gdb.dwarf2/pr11465.S @@ -344,7 +344,11 @@ die149: .uleb128 0x16 /* DW_TAG_variable */ .byte 0x0 .byte 0x0 .byte 0x0 - .section .debug_str +#ifdef __arm__ + .section .debug_str,"MS",%progbits,1 +#else + .section .debug_str,"MS",@progbits,1 +#endif .LASF0: .string "_ZN1N1fE" .LASF7: diff --git a/gdb/testsuite/gdb.dwarf2/varval.exp b/gdb/testsuite/gdb.dwarf2/varval.exp index 0693f43..6846ecb 100644 --- a/gdb/testsuite/gdb.dwarf2/varval.exp +++ b/gdb/testsuite/gdb.dwarf2/varval.exp @@ -348,6 +348,6 @@ if ![runto_main] { } gdb_test "print badval" "value has been optimized out" gdb_test "print bad_die_val1" \ - "invalid dwarf2 offset 0xabcdef11" + {DWARF Error: could not find unit containing offset 0xabcdef11 \[in module .*/varval\]} gdb_test "print bad_die_val2" \ "Bad DW_OP_GNU_variable_value DIE\\." diff --git a/gdb/testsuite/gdb.gdb/python-helper.exp b/gdb/testsuite/gdb.gdb/python-helper.exp index 4b9adb0..7f91278 100644 --- a/gdb/testsuite/gdb.gdb/python-helper.exp +++ b/gdb/testsuite/gdb.gdb/python-helper.exp @@ -264,13 +264,31 @@ proc test_python_helper {} { gdb_test -prompt $outer_prompt_re "print varobj_table" \ "htab_t with ${::decimal} elements" + set inferior_list_supported 1 + set inferior_list_unsupported_re "type = intrusive_list" + gdb_test_multiple "what inferior_list" "" -prompt $outer_prompt_re { + -re -wrap $inferior_list_unsupported_re { + set inferior_list_supported 0 + pass $gdb_test_name + } + -re -wrap "" { + pass $gdb_test_name + } + } + # Test the intrusive_list pretty-printer. A bug occurred in the # pretty-printer for lists with more than one element. Verify that # we see both elements of the inferior_list list being printed. - gdb_test -prompt $outer_prompt_re "print inferior_list" "intrusive list of inferior = {.*, num = 1,.*, num = 2,.*}" + set test "print inferior_list" + if { $inferior_list_supported } { + gdb_test -prompt $outer_prompt_re $test \ + "intrusive list of inferior = {.*, num = 1,.*, num = 2,.*}" + } else { + unsupported $test + } return 0 } # Use the self-test framework to run the test. -do_self_tests captured_main test_python_helper +do_self_tests main test_python_helper diff --git a/gdb/testsuite/gdb.gdb/selftest.exp b/gdb/testsuite/gdb.gdb/selftest.exp index 1cf9265..3948fce 100644 --- a/gdb/testsuite/gdb.gdb/selftest.exp +++ b/gdb/testsuite/gdb.gdb/selftest.exp @@ -167,5 +167,5 @@ proc test_with_self { } { save_vars { INTERNAL_GDBFLAGS } { set INTERNAL_GDBFLAGS [string map {"-q" ""} $INTERNAL_GDBFLAGS] - do_self_tests captured_main test_with_self + do_self_tests main test_with_self } diff --git a/gdb/testsuite/gdb.guile/scm-cmd.exp b/gdb/testsuite/gdb.guile/scm-cmd.exp index 9caca24..3709cb1 100644 --- a/gdb/testsuite/gdb.guile/scm-cmd.exp +++ b/gdb/testsuite/gdb.guile/scm-cmd.exp @@ -71,6 +71,65 @@ gdb_test_multiline "input subcommand" \ gdb_test "prefix-cmd subcmd ugh" "subcmd output, arg = ugh" "call subcmd" +# Create a sub-command using a partial, but still unique, prefix. + +gdb_test_multiline "sub-command using partial prefix" \ + "guile" "" \ + "(register-command! (make-command \"prefix subcmd2\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:invoke (lambda (self arg from-tty)" "" \ + " (display (format #f \"subcmd2 output, arg = ~a\\n\" arg)))))" "" \ + "end" "" + +gdb_test "prefix-cmd subcmd2 ugh" "subcmd2 output, arg = ugh" "call subcmd2" + +# Now create a second prefix, similar to the first. + +gdb_test_multiline "create prefix-xxx prefix command" \ + "guile" "" \ + "(register-command! (make-command \"prefix-xxx\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:completer-class COMPLETE_NONE" "" \ + " #:prefix? #t))" "" \ + "end" "" + +# Now create a sub-command using an ambiguous prefix. + +gdb_test_multiline "sub-command using ambiguous partial prefix" \ + "guile" "" \ + "(register-command! (make-command \"prefix subcmd3\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:invoke (lambda (self arg from-tty)" "" \ + " (display (format #f \"subcmd3 output, arg = ~a\\n\" arg)))))" "" \ + "end" \ + [multi_line \ + "Out of range: could not find command prefix 'prefix' in position 1: \"prefix subcmd3\"" \ + "Error while executing Scheme code\\."] + +# Check for errors when creating a command with an unknown prefix. + +gdb_test_multiline "try to create 'unknown-prefix subcmd'" \ + "guile" "" \ + "(register-command! (make-command \"unknown-prefix subcmd\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:invoke (lambda (self arg from-tty)" "" \ + " (display \"called unknown-prefix subcmd\"))))" "" \ + "end" \ + [multi_line \ + "Out of range: could not find command prefix 'unknown-prefix' in position 1: \"unknown-prefix subcmd\"" \ + "Error while executing Scheme code\\."] + +gdb_test_multiline "try to create 'prefix-cmd unknown-prefix subcmd'" \ + "guile" "" \ + "(register-command! (make-command \"prefix-cmd unknown-prefix subcmd\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:invoke (lambda (self arg from-tty)" "" \ + " (display \"called prefix-cmd unknown-prefix subcmd\"))))" "" \ + "end" \ + [multi_line \ + "Out of range: could not find command prefix 'prefix-cmd unknown-prefix' in position 1: \"prefix-cmd unknown-prefix subcmd\"" \ + "Error while executing Scheme code\\."] + # Test a subcommand in an existing GDB prefix. gdb_test_multiline "input new subcommand" \ diff --git a/gdb/testsuite/gdb.guile/scm-frame.exp b/gdb/testsuite/gdb.guile/scm-frame.exp index b5ec73f..9a27c42 100644 --- a/gdb/testsuite/gdb.guile/scm-frame.exp +++ b/gdb/testsuite/gdb.guile/scm-frame.exp @@ -52,7 +52,7 @@ gdb_test "guile (print (frame-read-var bf1 \"b\"))" \ "\"bar\"" "test b" # Test the read-var function in another block other than the current -# block (in this case, the super block). Test thar read-var is reading +# block (in this case, the super block). Test that read-var is reading # the correct variables of i and f but they are the correct value and type. gdb_scm_test_silent_cmd "guile (define sb (block-superblock (frame-block bf1)))" \ "get superblock" diff --git a/gdb/testsuite/gdb.guile/scm-parameter.exp b/gdb/testsuite/gdb.guile/scm-parameter.exp index 8ab5d93..0ee11e6 100644 --- a/gdb/testsuite/gdb.guile/scm-parameter.exp +++ b/gdb/testsuite/gdb.guile/scm-parameter.exp @@ -67,9 +67,19 @@ with_test_prefix "test-param" { gdb_test_no_output "set print test-param off" gdb_test "show print test-param" "The state of the Test Parameter is off." "show parameter off" gdb_test "guile (print (parameter-value test-param))" "= #f" "parameter value, false" - gdb_test "help show print test-param" "Show the state of the boolean test-param.*" "show help" - gdb_test "help set print test-param" "Set the state of the boolean test-param.*" "set help" - gdb_test "help set print" "set print test-param -- Set the state of the boolean test-param.*" "general help" + gdb_test "help show print test-param" \ + [multi_line \ + "^Show the state of the boolean test-param\\." \ + "When enabled, test param does something useful\\. When disabled, does nothing\\."] \ + "show help" + gdb_test "help set print test-param" \ + [multi_line \ + "^Set the state of the boolean test-param\\." \ + "When enabled, test param does something useful\\. When disabled, does nothing\\."] \ + "set help" + gdb_test "help set print" \ + "set print test-param -- Set the state of the boolean test-param.*" \ + "general help" gdb_test "guile (print (parameter? test-param))" "= #t" gdb_test "guile (print (parameter? 42))" "= #f" @@ -314,9 +324,17 @@ with_test_prefix "test-undocumented-param" { gdb_test "show print test-undoc-param" "The state of the Test Parameter is on." "show parameter on" gdb_test_no_output "set print test-undoc-param off" gdb_test "show print test-undoc-param" "The state of the Test Parameter is off." "show parameter off" - gdb_test "help show print test-undoc-param" "This command is not documented." "show help" - gdb_test "help set print test-undoc-param" "This command is not documented." "set help" - gdb_test "help set print" "set print test-undoc-param -- This command is not documented.*" "general help" + gdb_test "help show print test-undoc-param" \ + [multi_line \ + "^Show the current value of 'print test-undoc-param'\\." \ + "This command is not documented\\."] \ + "show help" + gdb_test "help set print test-undoc-param" \ + [multi_line \ + "Set the current value of 'print test-undoc-param'\\." \ + "This command is not documented\\."] \ + "set help" + gdb_test "help set print" "set print test-undoc-param -- Set the current value of 'print test-undoc-param'\\..*" "general help" } # Test a parameter with a restricted range, where we need to notify the user @@ -379,60 +397,218 @@ gdb_test_no_output "guile (register-parameter! prev-ambig)" with_test_prefix "previously-ambiguous" { gdb_test "guile (print (parameter-value prev-ambig))" "= #f" "parameter value, false" - gdb_test "show print s" "Command is not documented is off." "show parameter off" + gdb_test "show print s" \ + "The current value of 'print s' is off\\." "show parameter off" gdb_test_no_output "set print s on" - gdb_test "show print s" "Command is not documented is on." "show parameter on" + gdb_test "show print s" \ + "The current value of 'print s' is on\\." "show parameter on" gdb_test "guile (print (parameter-value prev-ambig))" "= #t" "parameter value, true" - gdb_test "help show print s" "This command is not documented." "show help" - gdb_test "help set print s" "This command is not documented." "set help" - gdb_test "help set print" "set print s -- This command is not documented.*" "general help" + gdb_test "help show print s" \ + [multi_line \ + "^Show the current value of 'print s'\\." \ + "This command is not documented\\."] \ + "show help" + gdb_test "help set print s" \ + [multi_line \ + "Set the current value of 'print s'\\." \ + "This command is not documented\\."] \ + "set help" + gdb_test "help set print" \ + "set print s -- Set the current value of 'print s'\\..*" \ + "general help" } -rename scm_param_test_maybe_no_output "" - -# Test a color parameter. +gdb_test_multiline "create set/show foo1 prefix commands" \ + "guile" "" \ + "(register-command! (make-command \"set foo1\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:prefix? #t))" "" \ + "(register-command! (make-command \"show foo1\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:prefix? #t))" "" \ + "end" -with_ansi_styling_terminal { - # This enables 256 colors support and disables colors approximation. - setenv TERM xterm-256color - setenv COLORTERM truecolor +gdb_test_multiline "create set/show foo1 baz1 prefix commands" \ + "guile" "" \ + "(register-command! (make-command \"set foo1 baz1\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:prefix? #t))" "" \ + "(register-command! (make-command \"show foo1 baz1\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:prefix? #t))" "" \ + "end" - # Start with a fresh gdb. - gdb_exit - gdb_start - gdb_reinitialize_dir $srcdir/$subdir +gdb_test_multiline "create 'foo bar' parameter" \ + "guile" "" \ + "(register-parameter! (make-parameter \"foo bar\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:parameter-type PARAM_BOOLEAN" "" \ + " #:show-func (lambda (self value)" "" \ + " (format #f \"The state of 'foo bar' is ~a.\" value))" "" \ + " #:initial-value #t))" "" \ + "end" - gdb_install_guile_utils - gdb_install_guile_module +gdb_test "show foo1 bar" "^The state of 'foo bar' is on\\." "show parameter 'foo bar'" - # We use "." here instead of ":" so that this works on win32 too. - set escaped_directory [string_to_regexp "$srcdir/$subdir"] +gdb_test_multiline "create set/show foo2 prefix commands" \ + "guile" "" \ + "(register-command! (make-command \"set foo2\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:prefix? #t))" "" \ + "(register-command! (make-command \"show foo2\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:prefix? #t))" "" \ + "end" "" + +gdb_test_multiline "create ambiguous 'foo baz' parameter" \ + "guile" "" \ + "(register-parameter! (make-parameter \"foo baz\"" "" \ + " #:command-class COMMAND_OBSCURE" "" \ + " #:parameter-type PARAM_BOOLEAN" "" \ + " #:show-func (lambda (self value)" "" \ + " (format #f \"The state of 'foo baz' is ~a.\" value))" "" \ + " #:initial-value #t))" "" \ + "end" \ + [multi_line \ + "Out of range: could not find command prefix 'foo' in position 1: \"foo baz\"" \ + "Error while executing Scheme code."] - gdb_test_multiline "color gdb parameter" \ +with_test_prefix "empty doc string" { + gdb_test_multiline "empty doc string parameter" \ "guile" "" \ - "(define test-color-param" "" \ - " (make-parameter \"print test-color-param\"" "" \ - " #:command-class COMMAND_DATA" "" \ - " #:parameter-type PARAM_COLOR" "" \ - " #:doc \"When set, test param does something useful. When disabled, does nothing.\"" "" \ - " #:show-doc \"Show the state of the test-color-param.\"" "" \ - " #:set-doc \"Set the state of the test-color-param.\"" "" \ - " #:show-func (lambda (self value)" "" \ - " (format #f \"The state of the test-color-param is ~a.\" value))" "" \ - " #:initial-value (make-color \"green\")))" "" \ - "(register-parameter! test-color-param)" "" \ + "(register-parameter! (make-parameter \"empty-doc-string\"" "" \ + " #:command-class COMMAND_NONE" "" \ + " #:parameter-type PARAM_ZINTEGER" "" \ + " #:doc \"\"" "" \ + " #:set-doc \"Set doc string.\"" "" \ + " #:show-doc \"Show doc string.\"))" "" \ "end" - with_test_prefix "test-color-param" { - with_test_prefix "initial-value" { - gdb_test "guile (print (parameter-value test-color-param))" "= #<gdb:color green COLORSPACE_ANSI_8COLOR>" "color parameter value (green)" - gdb_test "show print test-color-param" "The state of the test-color-param is green." "show initial value" - gdb_test_no_output "set print test-color-param 255" - } - with_test_prefix "new-value" { - gdb_test "show print test-color-param" "The state of the test-color-param is 255." "show new value" - gdb_test "guile (print (parameter-value test-color-param))" "= #<gdb:color 255 COLORSPACE_XTERM_256COLOR>" "color parameter value (255)" - gdb_test "set print test-color-param 256" "integer 256 out of range.*" "set invalid color parameter" + gdb_test "help set empty-doc-string" "^Set doc string\\." + gdb_test "help show empty-doc-string" "^Show doc string\\." +} + +with_test_prefix "set/show parameter" { + # This first set/show prefix command doesn't have an invoke + # method. As such, GDB installs the default invoke behaviour; set + # prints the full list of sub-commands, and show prints all the + # sub-command values. + gdb_test_multiline "Setup set/show parameter prefix with no invoke" \ + "guile" "" \ + "(register-command! (make-command \"set test-prefix\"" "" \ + " #:prefix? #t" "" \ + " #:command-class COMMAND_NONE))" ""\ + "(register-command! (make-command \"show test-prefix\"" "" \ + " #:prefix? #t" "" \ + " #:command-class COMMAND_NONE))" ""\ + "(register-parameter! (make-parameter \"test-prefix param-1\"" "" \ + " #:command-class COMMAND_NONE" "" \ + " #:parameter-type PARAM_BOOLEAN))" "" \ + "(register-parameter! (make-parameter \"test-prefix param-2\"" "" \ + " #:command-class COMMAND_NONE" "" \ + " #:parameter-type PARAM_UINTEGER))" "" \ + "(register-parameter! (make-parameter \"test-prefix param-3\"" "" \ + " #:command-class COMMAND_NONE" "" \ + " #:parameter-type PARAM_STRING))" "" \ + "end" "" + + gdb_test "set test-prefix" \ + [multi_line \ + "List of \"set test-prefix\" subcommands:" \ + "" \ + "set test-prefix param-1 -- Set the current value of 'test-prefix param-1'." \ + "set test-prefix param-2 -- Set the current value of 'test-prefix param-2'." \ + "set test-prefix param-3 -- Set the current value of 'test-prefix param-3'." \ + "" \ + "Type \"help set test-prefix\" followed by subcommand name for full documentation\\." \ + "Type \"apropos word\" to search for commands related to \"word\"\\." \ + "Type \"apropos -v word\" for full documentation of commands related to \"word\"\\." \ + "Command name abbreviations are allowed if unambiguous\\."] + + gdb_test "show test-prefix" \ + [multi_line \ + "test-prefix param-1: The current value of 'test-prefix param-1' is off\\." \ + "test-prefix param-2: The current value of 'test-prefix param-2' is 0\\." \ + "test-prefix param-3: The current value of 'test-prefix param-3' is \"\"\\."] + + # This next set/show prefix has an invoke method, which will be + # called instead of the default behaviour tested above. + gdb_test_multiline "Setup set/show parameter prefix with invoke" \ + "guile" "" \ + "(register-command! (make-command \"set test-prefix-2\"" "" \ + " #:prefix? #t" "" \ + " #:command-class COMMAND_NONE" ""\ + " #:invoke (lambda (self arg from-tty)" "" \ + " (display \"invoke -- set\\n\"))))" "" \ + "(register-command! (make-command \"show test-prefix-2\"" "" \ + " #:prefix? #t" "" \ + " #:command-class COMMAND_NONE" ""\ + " #:invoke (lambda (self arg from-tty)" "" \ + " (display \"invoke -- show\\n\"))))" "" \ + "(register-parameter! (make-parameter \"test-prefix-2 param-1\"" "" \ + " #:command-class COMMAND_NONE" "" \ + " #:parameter-type PARAM_BOOLEAN))" "" \ + "(register-parameter! (make-parameter \"test-prefix-2 param-2\"" "" \ + " #:command-class COMMAND_NONE" "" \ + " #:parameter-type PARAM_UINTEGER))" "" \ + "(register-parameter! (make-parameter \"test-prefix-2 param-3\"" "" \ + " #:command-class COMMAND_NONE" "" \ + " #:parameter-type PARAM_STRING))" "" \ + "end" "" + + gdb_test "set test-prefix-2" "^invoke -- set" + + gdb_test "show test-prefix-2" "^invoke -- show" +} + +rename scm_param_test_maybe_no_output "" + +# Test a color parameter. + +if { ![is_remote host] } { + with_ansi_styling_terminal { + + # This enables 256 colors support and disables colors approximation. + setenv TERM xterm-256color + setenv COLORTERM truecolor + + # Start with a fresh gdb. + gdb_exit + gdb_start + gdb_reinitialize_dir $srcdir/$subdir + + gdb_install_guile_utils + gdb_install_guile_module + + # We use "." here instead of ":" so that this works on win32 too. + set escaped_directory [string_to_regexp "$srcdir/$subdir"] + + gdb_test_multiline "color gdb parameter" \ + "guile" "" \ + "(define test-color-param" "" \ + " (make-parameter \"print test-color-param\"" "" \ + " #:command-class COMMAND_DATA" "" \ + " #:parameter-type PARAM_COLOR" "" \ + " #:doc \"When set, test param does something useful. When disabled, does nothing.\"" "" \ + " #:show-doc \"Show the state of the test-color-param.\"" "" \ + " #:set-doc \"Set the state of the test-color-param.\"" "" \ + " #:show-func (lambda (self value)" "" \ + " (format #f \"The state of the test-color-param is ~a.\" value))" "" \ + " #:initial-value (make-color \"green\")))" "" \ + "(register-parameter! test-color-param)" "" \ + "end" + + with_test_prefix "test-color-param" { + with_test_prefix "initial-value" { + gdb_test "guile (print (parameter-value test-color-param))" "= #<gdb:color green COLORSPACE_ANSI_8COLOR>" "color parameter value (green)" + gdb_test "show print test-color-param" "The state of the test-color-param is green." "show initial value" + gdb_test_no_output "set print test-color-param 255" + } + with_test_prefix "new-value" { + gdb_test "show print test-color-param" "The state of the test-color-param is 255." "show new value" + gdb_test "guile (print (parameter-value test-color-param))" "= #<gdb:color 255 COLORSPACE_XTERM_256COLOR>" "color parameter value (255)" + gdb_test "set print test-color-param 256" "integer 256 out of range.*" "set invalid color parameter" + } } } } diff --git a/gdb/testsuite/gdb.linespec/linespec.exp b/gdb/testsuite/gdb.linespec/linespec.exp index 69744dd..86b55bb 100644 --- a/gdb/testsuite/gdb.linespec/linespec.exp +++ b/gdb/testsuite/gdb.linespec/linespec.exp @@ -194,6 +194,12 @@ gdb_test "break lspec.h:$line" \ "Breakpoint \[0-9\]+ at $hex: file .*lspec.h, line $line." \ "set breakpoint in f1" +# This should only have a single location -- in no_multi_locs. +set line [gdb_get_line_number no_multi_locs] +gdb_test "break $line" \ + "Breakpoint \[0-9\]+ at $hex: file .*$srcfile, line $line." \ + "set breakpoint at no_multi_locs" + # # Multi-inferior tests. # diff --git a/gdb/testsuite/gdb.linespec/lspec.cc b/gdb/testsuite/gdb.linespec/lspec.cc index bb660fb..ab0a193 100644 --- a/gdb/testsuite/gdb.linespec/lspec.cc +++ b/gdb/testsuite/gdb.linespec/lspec.cc @@ -13,6 +13,8 @@ int body_elsewhere() #include "body.h" } +void no_multi_locs () { {int var = 0;} } + int main() { return dupname(0) + m(0) + n(0) + f1() + f2() + body_elsewhere(); diff --git a/gdb/testsuite/gdb.mi/interrupt-thread-group.exp b/gdb/testsuite/gdb.mi/interrupt-thread-group.exp index ff35109..869fb1c 100644 --- a/gdb/testsuite/gdb.mi/interrupt-thread-group.exp +++ b/gdb/testsuite/gdb.mi/interrupt-thread-group.exp @@ -54,7 +54,7 @@ mi_send_resuming_command "exec-continue --thread-group i1" \ # We can't run a second inferior on stub targets. We can still test with one # inferior and ensure that the command has the desired effect. -set use_second_inferior [expr {![use_gdb_stub]}] +set use_second_inferior [expr {![use_gdb_stub] && [allow_multi_inferior_tests]}] if { $use_second_inferior } { mi_gdb_test "-add-inferior" \ diff --git a/gdb/testsuite/gdb.mi/mi-condbreak-throw.exp b/gdb/testsuite/gdb.mi/mi-condbreak-throw.exp index 9897b2b..0a89a8a 100644 --- a/gdb/testsuite/gdb.mi/mi-condbreak-throw.exp +++ b/gdb/testsuite/gdb.mi/mi-condbreak-throw.exp @@ -16,7 +16,7 @@ # Check that when GDB fails to evaluate the condition of a conditional # breakpoint we only get one *stopped notification. In this test case # the breakpoint condition fails due to throwing an uncaught C++ -# excpetion. +# exception. require allow_cplus_tests diff --git a/gdb/testsuite/gdb.mi/mi-multi-commands.exp b/gdb/testsuite/gdb.mi/mi-multi-commands.exp index 20b8d46..3bc63eb 100644 --- a/gdb/testsuite/gdb.mi/mi-multi-commands.exp +++ b/gdb/testsuite/gdb.mi/mi-multi-commands.exp @@ -90,7 +90,7 @@ proc run_test { args } { # looking for. However, due to the unpredictable # intermingling, it's much easier if we drop the ^ anchor. # However, with this gone dejagnu would sometimes match the - # second comand output before the first commands output. + # second command output before the first commands output. # # This approach just looks for the first command output, then, # once that has been found, we start looking for the second diff --git a/gdb/testsuite/gdb.mi/mi-var-display.exp b/gdb/testsuite/gdb.mi/mi-var-display.exp index 61b3894..5535368 100644 --- a/gdb/testsuite/gdb.mi/mi-var-display.exp +++ b/gdb/testsuite/gdb.mi/mi-var-display.exp @@ -96,7 +96,7 @@ mi_gdb_test "-var-evaluate-expression bar" \ # Desc: change value of bar mi_gdb_test "-var-assign bar 3" \ "\\^done,value=\"0x3\"" \ - "assing to variable bar" + "assign to variable bar" mi_gdb_test "-var-set-format bar decimal" \ "\\^done,format=\"decimal\",value=\"3\"" \ @@ -152,7 +152,7 @@ mi_gdb_test "-var-evaluate-expression foo" \ # Desc: change value of foo mi_gdb_test "-var-assign foo 3" \ "\\^done,value=\"03\"" \ - "assing to variable foo" + "assign to variable foo" mi_gdb_test "-var-set-format foo decimal" \ "\\^done,format=\"decimal\",value=\"3\"" \ diff --git a/gdb/testsuite/gdb.mi/user-selected-context-sync.exp b/gdb/testsuite/gdb.mi/user-selected-context-sync.exp index 9198cfb..f85e108 100644 --- a/gdb/testsuite/gdb.mi/user-selected-context-sync.exp +++ b/gdb/testsuite/gdb.mi/user-selected-context-sync.exp @@ -40,6 +40,8 @@ standard_testfile # gdbserver modes are supported. require !use_gdb_stub +require allow_multi_inferior_tests + set compile_options "debug pthreads" if {[build_executable $testfile.exp $testfile ${srcfile} ${compile_options}] == -1} { untested "failed to compile" @@ -985,7 +987,7 @@ proc_with_prefix test_mi_stack_select_frame { mode } { # Now use the '-stack-select-frame' command with the --frame # option, this verifies that even when the frame GDB would - # swith to is the same as the frame specified with --frame, an + # switch to is the same as the frame specified with --frame, an # event is still sent to the CLI. set cli_re [make_cli_re $mode -1 -1 0] diff --git a/gdb/testsuite/gdb.multi/attach-no-multi-process.exp b/gdb/testsuite/gdb.multi/attach-no-multi-process.exp index 28aabaf..502f309 100644 --- a/gdb/testsuite/gdb.multi/attach-no-multi-process.exp +++ b/gdb/testsuite/gdb.multi/attach-no-multi-process.exp @@ -59,7 +59,10 @@ proc test {target_non_stop} { "switch to inferior 2" set res [gdbserver_start "--multi" ""] set gdbserver_gdbport [lindex $res 1] - gdb_target_cmd "extended-remote" $gdbserver_gdbport + if { [gdb_target_cmd_ext "extended-remote" $gdbserver_gdbport] == 2 } { + unsupported "non-stop RSP" + return + } # Start a program, then attach to it. set spawn_id_list [spawn_wait_for_attach [list $binfile]] diff --git a/gdb/testsuite/gdb.multi/attach-while-running.exp b/gdb/testsuite/gdb.multi/attach-while-running.exp index 5b63030..723ebb2 100644 --- a/gdb/testsuite/gdb.multi/attach-while-running.exp +++ b/gdb/testsuite/gdb.multi/attach-while-running.exp @@ -37,6 +37,7 @@ standard_testfile require can_spawn_for_attach +require allow_multi_inferior_tests if { [build_executable "failed to prepare" ${testfile} ${srcfile}] } { return @@ -49,7 +50,7 @@ proc do_test {} { } gdb_test -no-prompt-anchor "run &" - gdb_test "add-inferior" "Added inferior 2 on connection 1 .*" + gdb_test -no-prompt-anchor "add-inferior" "Added inferior 2 on connection 1 .*" gdb_test "inferior 2" "Switching to inferior 2 .*" set spawn_id [spawn_wait_for_attach $::binfile] diff --git a/gdb/testsuite/gdb.multi/bp-thread-specific.exp b/gdb/testsuite/gdb.multi/bp-thread-specific.exp index 32b7602..3fe4c20 100644 --- a/gdb/testsuite/gdb.multi/bp-thread-specific.exp +++ b/gdb/testsuite/gdb.multi/bp-thread-specific.exp @@ -19,6 +19,8 @@ # Also check that the correct thread-ids are used in the saved # breakpoints file. +require allow_multi_inferior_tests + # The plain remote target can't do multiple inferiors. require !use_gdb_stub diff --git a/gdb/testsuite/gdb.multi/dummy-frame-restore.exp b/gdb/testsuite/gdb.multi/dummy-frame-restore.exp index 1a9d413..4119e3f 100644 --- a/gdb/testsuite/gdb.multi/dummy-frame-restore.exp +++ b/gdb/testsuite/gdb.multi/dummy-frame-restore.exp @@ -19,6 +19,8 @@ set executable ${testfile} # The plain remote target can't do multiple inferiors. require !use_gdb_stub +require allow_multi_inferior_tests + if {[prepare_for_testing "failed to prepare" $testfile $srcfile {debug}]} { return -1 } diff --git a/gdb/testsuite/gdb.multi/multi-arch.exp b/gdb/testsuite/gdb.multi/multi-arch.exp index d0ae511..1d41ba5 100644 --- a/gdb/testsuite/gdb.multi/multi-arch.exp +++ b/gdb/testsuite/gdb.multi/multi-arch.exp @@ -18,6 +18,8 @@ set testfile "multi-arch" +require allow_multi_inferior_tests + # The plain remote target can't do multiple inferiors. require !use_gdb_stub diff --git a/gdb/testsuite/gdb.multi/multi-attach.exp b/gdb/testsuite/gdb.multi/multi-attach.exp index 2d702ee..210c8ca 100644 --- a/gdb/testsuite/gdb.multi/multi-attach.exp +++ b/gdb/testsuite/gdb.multi/multi-attach.exp @@ -17,6 +17,8 @@ # Test attaching to multiple threaded programs. +require allow_multi_inferior_tests + standard_testfile require can_spawn_for_attach diff --git a/gdb/testsuite/gdb.multi/multi-exit.exp b/gdb/testsuite/gdb.multi/multi-exit.exp index 71236c1..8393067 100644 --- a/gdb/testsuite/gdb.multi/multi-exit.exp +++ b/gdb/testsuite/gdb.multi/multi-exit.exp @@ -24,6 +24,8 @@ standard_testfile +require allow_multi_inferior_tests + require !use_gdb_stub if {[build_executable "failed to prepare" $testfile $srcfile]} { diff --git a/gdb/testsuite/gdb.multi/multi-kill.exp b/gdb/testsuite/gdb.multi/multi-kill.exp index 48a2534..7d66ab0 100644 --- a/gdb/testsuite/gdb.multi/multi-kill.exp +++ b/gdb/testsuite/gdb.multi/multi-kill.exp @@ -24,6 +24,8 @@ standard_testfile +require allow_multi_inferior_tests + require !use_gdb_stub if {[build_executable "failed to prepare" $testfile $srcfile {debug}]} { diff --git a/gdb/testsuite/gdb.multi/multi-re-run.exp b/gdb/testsuite/gdb.multi/multi-re-run.exp index 002de57..4caadea 100644 --- a/gdb/testsuite/gdb.multi/multi-re-run.exp +++ b/gdb/testsuite/gdb.multi/multi-re-run.exp @@ -20,6 +20,8 @@ # misbehave, including failing to load libthread_db.so. See PR # gdb/25410. +require allow_multi_inferior_tests + # Build two executables, with different symbols. set exec1 "multi-re-run-1" diff --git a/gdb/testsuite/gdb.multi/multi-target.exp.tcl b/gdb/testsuite/gdb.multi/multi-target.exp.tcl index 8c24602..dc88ca4 100644 --- a/gdb/testsuite/gdb.multi/multi-target.exp.tcl +++ b/gdb/testsuite/gdb.multi/multi-target.exp.tcl @@ -175,6 +175,10 @@ proc multi_target_prepare {} { return 0 } + if {![allow_multi_inferior_tests]} { + return 0 + } + # The plain remote target can't do multiple inferiors. if {[target_info gdb_protocol] != ""} { return 0 diff --git a/gdb/testsuite/gdb.multi/multi-term-settings.exp b/gdb/testsuite/gdb.multi/multi-term-settings.exp index 2f8b3b8..38322be 100644 --- a/gdb/testsuite/gdb.multi/multi-term-settings.exp +++ b/gdb/testsuite/gdb.multi/multi-term-settings.exp @@ -25,6 +25,8 @@ standard_testfile +require allow_multi_inferior_tests + require can_spawn_for_attach if [build_executable "failed to prepare" $testfile $srcfile {debug}] { diff --git a/gdb/testsuite/gdb.multi/pending-bp.exp b/gdb/testsuite/gdb.multi/pending-bp.exp index 1cd1cfb..2458cd7 100644 --- a/gdb/testsuite/gdb.multi/pending-bp.exp +++ b/gdb/testsuite/gdb.multi/pending-bp.exp @@ -328,5 +328,7 @@ proc_with_prefix py_test_clear_thread {} { # Run all the tests. test_no_inf_display test_pending_toggle -py_test_toggle_thread -py_test_clear_thread +if { [allow_python_tests] } { + py_test_toggle_thread + py_test_clear_thread +} diff --git a/gdb/testsuite/gdb.multi/start-inferior-specific.exp b/gdb/testsuite/gdb.multi/start-inferior-specific.exp index 819c1c3..74f984c 100644 --- a/gdb/testsuite/gdb.multi/start-inferior-specific.exp +++ b/gdb/testsuite/gdb.multi/start-inferior-specific.exp @@ -25,6 +25,8 @@ standard_testfile .c -other.c +require allow_multi_inferior_tests + require !use_gdb_stub set srcfile_other ${srcfile2} diff --git a/gdb/testsuite/gdb.multi/stop-all-on-exit.exp b/gdb/testsuite/gdb.multi/stop-all-on-exit.exp index b4ff09c..47071f3 100644 --- a/gdb/testsuite/gdb.multi/stop-all-on-exit.exp +++ b/gdb/testsuite/gdb.multi/stop-all-on-exit.exp @@ -18,6 +18,8 @@ # Test that in all-stop mode with multiple inferiors, GDB stops all # threads upon receiving an exit event from one of the inferiors. +require allow_multi_inferior_tests + # This is a test specific for a native target, where we use the # "-exec" argument to "add-inferior" and we explicitly don't do # "maint set target-non-stop on". diff --git a/gdb/testsuite/gdb.multi/tids-gid-reset.exp b/gdb/testsuite/gdb.multi/tids-gid-reset.exp index 6cc27eb..1785ac2 100644 --- a/gdb/testsuite/gdb.multi/tids-gid-reset.exp +++ b/gdb/testsuite/gdb.multi/tids-gid-reset.exp @@ -54,6 +54,8 @@ with_test_prefix "single-inferior" { # non-extended gdbserver is not supported. require !use_gdb_stub +require allow_multi_inferior_tests + # Test with multiple inferiors. This time, since we restart inferior # 1 while inferior 2 still has threads, then the new thread 1.1 should # end up with GID == 3, since we won't be able to reset the global diff --git a/gdb/testsuite/gdb.multi/tids.exp b/gdb/testsuite/gdb.multi/tids.exp index b84f908..436a38a 100644 --- a/gdb/testsuite/gdb.multi/tids.exp +++ b/gdb/testsuite/gdb.multi/tids.exp @@ -124,6 +124,9 @@ with_test_prefix "single inferior" { gdb_test "print \$_inferior_thread_count" " = 1" } +# The rest of the tests require running multiple inferiors. +require allow_multi_inferior_tests + # "info threads" while there are multiple inferiors should show # qualified thread IDs. with_test_prefix "two inferiors" { @@ -290,7 +293,7 @@ with_test_prefix "two inferiors" { # Try both the convenience variable and the literal number. foreach thr {"\$thr" "20" "1.20" "\$inf.1" "30.1" } { set expected [string_to_regexp $thr] - gdb_test "info threads $thr" "No threads match '${expected}'." + gdb_test "info threads $thr" "No threads matched\\." # "info threads" works like a filter. If there's any other # valid thread in the list, there's no error. info_threads "$thr 1.1" "1.1" @@ -412,7 +415,7 @@ with_test_prefix "two inferiors" { # Check that we do parse the inferior number and don't confuse it. gdb_test "info threads 3.1" \ - "No threads match '3.1'\." + "No threads matched\\." } if { [allow_python_tests] } { diff --git a/gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp b/gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp index 70c3da9..3446296 100644 --- a/gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp +++ b/gdb/testsuite/gdb.multi/watchpoint-multi-exit.exp @@ -17,6 +17,8 @@ # watchpoints don't end up with stale locations, preventing resumption # of other inferiors. +require allow_fork_tests + standard_testfile if {[build_executable "failed to build" $testfile $srcfile {debug}]} { diff --git a/gdb/testsuite/gdb.multi/watchpoint-multi.exp b/gdb/testsuite/gdb.multi/watchpoint-multi.exp index f448689..b0c8731 100644 --- a/gdb/testsuite/gdb.multi/watchpoint-multi.exp +++ b/gdb/testsuite/gdb.multi/watchpoint-multi.exp @@ -16,6 +16,8 @@ standard_testfile set executable ${testfile} +require allow_multi_inferior_tests + # Multiple inferiors are needed, therefore both native and extended gdbserver # modes are supported. Only non-extended gdbserver is not supported. require !use_gdb_stub diff --git a/gdb/testsuite/gdb.opt/break-on-_exit.exp b/gdb/testsuite/gdb.opt/break-on-_exit.exp index 2b94be8..9295fea 100644 --- a/gdb/testsuite/gdb.opt/break-on-_exit.exp +++ b/gdb/testsuite/gdb.opt/break-on-_exit.exp @@ -25,7 +25,7 @@ # for libc, then the breakpoint is set on the exec-local _exit@plt instead, # and that functionality will also not be used. # -# We may get the required setup in case of a libc with misssing separate +# We may get the required setup in case of a libc with missing separate # debuginfo, but we want the same effect if that debuginfo is installed. # # So, we use -readnever to read minimal symbols, but not non-miminal symbols. diff --git a/gdb/testsuite/gdb.pascal/integers.exp b/gdb/testsuite/gdb.pascal/integers.exp index 5c878c5..c9974a1 100644 --- a/gdb/testsuite/gdb.pascal/integers.exp +++ b/gdb/testsuite/gdb.pascal/integers.exp @@ -59,7 +59,7 @@ gdb_test "next" "l := k;" "next to 'l := k' line" gdb_test "print j" " = 2" # k should be equal to 3 gdb_test "print k" " = 3" -# But l shoud still be zero +# But l should still be zero if { $pascal_compiler_is_gpc } { setup_xfail *-*-* } diff --git a/gdb/testsuite/gdb.python/py-cmd.exp b/gdb/testsuite/gdb.python/py-cmd.exp index f76c176..1fa3c73 100644 --- a/gdb/testsuite/gdb.python/py-cmd.exp +++ b/gdb/testsuite/gdb.python/py-cmd.exp @@ -278,13 +278,7 @@ gdb_test_multiline "input multi-line-output command" \ set test "verify pagination from test_multiline" gdb_test_multiple "test_multiline" $test { - -re "--Type <RET>" { - exp_continue - } - -re " for more, q to quit" { - exp_continue - } - -re ", c to continue without paging--$" { + -re "$pagination_prompt$" { pass $test } } @@ -328,4 +322,89 @@ proc_with_prefix test_command_redefining_itself {} { "call command redefining itself 2" } +# Try to create commands using unknown prefixes and check GDB gives an +# error. There's also a test in here for an ambiguous prefix, which +# gives the same error. +proc_with_prefix test_unknown_prefix {} { + clean_restart + + gdb_test_no_output "python gdb.Command('foo1', gdb.COMMAND_NONE, prefix=True)" + gdb_test_no_output "python gdb.Command('foo cmd', gdb.COMMAND_NONE)" + + foreach prefix { "xxx" "foo xxx" "foo1 xxx" } { + gdb_test "python gdb.Command('$prefix cmd', gdb.COMMAND_NONE)" \ + [multi_line \ + "Python Exception <class 'RuntimeError'>: Could not find command prefix $prefix\\." \ + "Error occurred in Python: Could not find command prefix $prefix\\."] + } + + gdb_test_no_output "python gdb.Command('foo2', gdb.COMMAND_NONE, prefix=True)" + + foreach prefix { "foo" "foo xxx" "foo1 xxx" "foo2 xxx" } { + gdb_test "python gdb.Command('$prefix cmd2', gdb.COMMAND_NONE)" \ + [multi_line \ + "Python Exception <class 'RuntimeError'>: Could not find command prefix $prefix\\." \ + "Error occurred in Python: Could not find command prefix $prefix\\."] + } +} + +# Check what happens if a command object is called without an 'invoke' +# method. +proc_with_prefix test_deleting_invoke_methods {} { + clean_restart + + gdb_test_multiline "create 'foo' prefix command" \ + "python" "" \ + "class test_prefix(gdb.Command):" "" \ + " def __init__ (self):" "" \ + " super().__init__ (\"foo\", gdb.COMMAND_USER, prefix=True)" "" \ + " def invoke (self, arg, from_tty):" "" \ + " print(\"In 'foo' invoke: %s\" % arg)" "" \ + "foo = test_prefix()" "" \ + "end" "" + + gdb_test_multiline "create 'foo bar' command" \ + "python" "" \ + "class test_cmd(gdb.Command):" "" \ + " def __init__ (self):" "" \ + " super().__init__ (\"foo bar\", gdb.COMMAND_USER)" "" \ + " def invoke (self, arg, from_tty):" "" \ + " print(\"In 'foo bar' invoke: %s\" % arg)" "" \ + "foo_bar = test_cmd()" "" \ + "end" "" + + gdb_test "foo def" "In 'foo' invoke: def" \ + "call 'foo' with an unknown sub-command" + + gdb_test "foo bar def" "In 'foo bar' invoke: def" \ + "call 'foo bar' with arguments" + + gdb_test_no_output "python del(foo_bar.__class__.invoke)" \ + "delete invoke from test_cmd class" + + with_test_prefix "after deleting test_cmd.invoke" { + gdb_test "foo def" "In 'foo' invoke: def" \ + "call 'foo' with an unknown sub-command" + + gdb_test "foo bar def" \ + "^Python command object missing 'invoke' method\\." \ + "call 'foo bar' with arguments" + } + + gdb_test_no_output "python del(foo.__class__.invoke)" \ + "delete invoke from test_prefix class" + + with_test_prefix "after deleting test_prefix.invoke" { + gdb_test "foo def" \ + "^Python command object missing 'invoke' method\\." \ + "call 'foo' with an unknown sub-command" + + gdb_test "foo bar def" \ + "^Python command object missing 'invoke' method\\." \ + "call 'foo bar' with arguments" + } +} + test_command_redefining_itself +test_unknown_prefix +test_deleting_invoke_methods diff --git a/gdb/testsuite/gdb.python/py-parameter-prefix.exp b/gdb/testsuite/gdb.python/py-parameter-prefix.exp new file mode 100644 index 0000000..eb09fe7 --- /dev/null +++ b/gdb/testsuite/gdb.python/py-parameter-prefix.exp @@ -0,0 +1,382 @@ +# Copyright (C) 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# This file is part of the GDB testsuite. It tests +# gdb.ParameterPrefix. See each of the test procs for a full +# description of what is being tested. + +load_lib gdb-python.exp + +require allow_python_tests + +clean_restart + +# Helper proc to generate the output of 'show PREFIX' commands for the +# case where the prefix command doesn't handle unknown sub-commands. +# In this case GDB will list the value of every sub-command under +# PREFIX. +proc make_show_prefix_re { prefix } { + return "$prefix param-1:\\s+The current value of '$prefix param-1' is \"off\"\\." +} + +# Helper proc to generate the help text that describes all of the sub +# commands under PREFIX. The MODE is either 'set' or 'show'. This +# output will appear for 'help MODE PREFIX' and also for 'set PREFIX'. +proc make_sub_cmd_help_re { mode prefix } { + if { $mode == "set" } { + set word "Set" + } else { + set word "Show" + } + + return \ + [multi_line \ + "List of \"$mode $prefix\" subcommands:" \ + "" \ + "$mode $prefix param-1 -- $word the current value of '$prefix param-1'\\." \ + "" \ + "Type \"help $mode $prefix\" followed by subcommand name for full documentation\\." \ + "Type \"apropos word\" to search for commands related to \"word\"\\." \ + "Type \"apropos -v word\" for full documentation of commands related to \"word\"\\." \ + "Command name abbreviations are allowed if unambiguous\\."] +} + +# Helper proc to generate the output of 'help MODE PREFIX', where MODE +# will be either 'set' or 'show'. The HELP_TEXT is the expected help +# text for this prefix command, this should not be a regexp, as this +# proc converts the text to a regexp. +# +# Return a single regexp which should match the output. +proc make_help_re { mode prefix help_text } { + set help_re [string_to_regexp $help_text] + + return \ + [multi_line \ + "$help_re" \ + "" \ + [make_sub_cmd_help_re $mode $prefix]] +} + +# Create gdb.ParameterPrefix without using a sub-class, both with, and +# without a doc string. For the doc string case, test single line, +# and multi-line doc strings. +proc_with_prefix test_basic_usage {} { + gdb_test_multiline "some basic ParameterPrefix usage" \ + "python" "" \ + "gdb.ParameterPrefix('prefix-1', gdb.COMMAND_NONE)" "" \ + "gdb.Parameter('prefix-1 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "gdb.Parameter('prefix-1 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "gdb.ParameterPrefix('prefix-2', gdb.COMMAND_NONE," "" \ + " \"\"\"This is prefix-2 help string.\"\"\")" "" \ + "gdb.Parameter('prefix-2 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "gdb.ParameterPrefix('prefix-3', gdb.COMMAND_NONE," "" \ + " \"\"\"This is prefix-3 help string." "" \ + " " "" \ + " This help text spans multiple lines.\"\"\")" "" \ + "gdb.Parameter('prefix-3 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "end" + + foreach mode { "set" "show" } { + gdb_test "help $mode prefix-1" \ + [make_help_re $mode "prefix-1" \ + "This command is not documented."] + + gdb_test "help $mode prefix-2" \ + [make_help_re $mode "prefix-2" \ + "This is prefix-2 help string."] + + gdb_test "help $mode prefix-3" \ + [make_help_re $mode "prefix-3" \ + [multi_line \ + "This is prefix-3 help string." \ + "" \ + "This help text spans multiple lines."]] + + foreach prefix { prefix-1 prefix-2 prefix-3 } { + gdb_test "$mode $prefix xxx" \ + "^Undefined $mode $prefix command: \"xxx\"\\. Try \"help $mode $prefix\"\\." + } + } + + foreach prefix { prefix-1 prefix-2 prefix-3 } { + gdb_test "set $prefix" \ + [make_sub_cmd_help_re "set" $prefix] + + gdb_test "show $prefix" \ + [make_show_prefix_re $prefix] + } +} + +# Create a sub-class of gdb.ParameterPrefix, but don't do anything +# particularly interesting. Again test the with and without +# documentation string cases. +proc_with_prefix test_simple_sub_class {} { + gdb_test_multiline "some basic ParameterPrefix usage" \ + "python" "" \ + "class BasicParamPrefix(gdb.ParameterPrefix):" "" \ + " def __init__(self, name):" "" \ + " super().__init__(name, gdb.COMMAND_NONE)" "" \ + "BasicParamPrefix('prefix-4')" "" \ + "gdb.Parameter('prefix-4 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "class BasicParamPrefixWithSingleLineDoc(gdb.ParameterPrefix):" "" \ + " \"\"\"This is a single line doc string.\"\"\"" "" \ + " def __init__(self, name):" "" \ + " super().__init__(name, gdb.COMMAND_NONE)" "" \ + "BasicParamPrefixWithSingleLineDoc('prefix-5')" "" \ + "gdb.Parameter('prefix-5 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "class BasicParamPrefixWithMultiLineDoc(gdb.ParameterPrefix):" "" \ + " \"\"\"This is a multi line doc string." "" \ + " " "" \ + " The rest of the doc string is here.\"\"\"" "" \ + " def __init__(self, name):" "" \ + " super().__init__(name, gdb.COMMAND_NONE)" "" \ + "BasicParamPrefixWithMultiLineDoc('prefix-6')" "" \ + "gdb.Parameter('prefix-6 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "class BasicParamPrefixWithDocParameter(gdb.ParameterPrefix):" "" \ + " \"\"\"This is an unsused doc string.\"\"\"" "" \ + " def __init__(self, name, doc):" "" \ + " super().__init__(name, gdb.COMMAND_NONE, doc)" "" \ + "BasicParamPrefixWithDocParameter('prefix-7'," "" \ + " \"\"\"The doc string text is here.\"\"\")" "" \ + "gdb.Parameter('prefix-7 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "end" + + foreach mode { "set" "show" } { + gdb_test "help $mode prefix-4" \ + [make_help_re $mode "prefix-4" \ + "This command is not documented."] + + gdb_test "help $mode prefix-5" \ + [make_help_re $mode "prefix-5" \ + "This is a single line doc string."] + + gdb_test "help $mode prefix-6" \ + [make_help_re $mode "prefix-6" \ + [multi_line \ + "This is a multi line doc string." \ + "" \ + "The rest of the doc string is here."]] + + gdb_test "help $mode prefix-7" \ + [make_help_re $mode "prefix-7" \ + "The doc string text is here."] + + foreach prefix { prefix-4 prefix-5 prefix-6 prefix-7 } { + gdb_test "$mode $prefix xxx" \ + "^Undefined $mode $prefix command: \"xxx\"\\. Try \"help $mode $prefix\"\\." + } + } + + foreach prefix { prefix-4 prefix-5 prefix-6 prefix-7 } { + gdb_test "set $prefix" \ + [make_sub_cmd_help_re "set" $prefix] + + gdb_test "show $prefix" \ + [make_show_prefix_re $prefix] + } +} + +# Create a sub-class of gdb.ParameterPrefix, and make use of +# 'invoke_set' and 'invoke_show'. Test that the invoke method is +# executed when expected, and that, by default, these invoke methods +# repeat when the user issues an empty command. +proc_with_prefix test_prefix_with_invoke {} { + gdb_test_multiline "ParameterPrefix with invoke_set" \ + "python" "" \ + "class PrefixWithInvokeSet(gdb.ParameterPrefix):" "" \ + " def __init__(self, name):" "" \ + " super().__init__(name, gdb.COMMAND_NONE)" "" \ + " def invoke_set(self, args, from_tty):" "" \ + " print(f\"invoke_set (a): \\\"{args}\\\" {from_tty}\")" "" \ + "PrefixWithInvokeSet('prefix-8')" "" \ + "gdb.Parameter('prefix-8 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "class PrefixWithInvokeShow(gdb.ParameterPrefix):" "" \ + " def __init__(self, name):" "" \ + " super().__init__(name, gdb.COMMAND_NONE)" "" \ + " def invoke_show(self, args, from_tty):" "" \ + " print(f\"invoke_show (b): \\\"{args}\\\" {from_tty}\")" "" \ + "PrefixWithInvokeShow('prefix-9')" "" \ + "gdb.Parameter('prefix-9 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "class PrefixWithBothInvoke(gdb.ParameterPrefix):" "" \ + " def __init__(self, name):" "" \ + " super().__init__(name, gdb.COMMAND_NONE)" "" \ + " def invoke_set(self, args, from_tty):" "" \ + " print(f\"invoke_set (c): \\\"{args}\\\" {from_tty}\")" "" \ + " def invoke_show(self, args, from_tty):" "" \ + " print(f\"invoke_show (d): \\\"{args}\\\" {from_tty}\")" "" \ + "PrefixWithBothInvoke('prefix-10')" "" \ + "gdb.Parameter('prefix-10 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "end" + + gdb_test "set prefix-8 xxx yyy" \ + "^invoke_set \\(a\\): \"xxx yyy\" True" + + send_gdb "\n" + gdb_test "" "^\r\ninvoke_set \\(a\\): \"xxx yyy\" True" \ + "repeat set prefix-8 xxx yyy" + + gdb_test "show prefix-8 xxx yyy" \ + "^Undefined show prefix-8 command: \"xxx yyy\"\\. Try \"help show prefix-8\"\\." + + gdb_test "set prefix-9 xxx yyy" \ + "^Undefined set prefix-9 command: \"xxx yyy\"\\. Try \"help set prefix-9\"\\." + + gdb_test "show prefix-9 xxx yyy" \ + "^invoke_show \\(b\\): \"xxx yyy\" True" + + send_gdb "\n" + gdb_test "" "^\r\ninvoke_show \\(b\\): \"xxx yyy\" True" \ + "repeat show prefix-9 xxx yyy" + + gdb_test "set prefix-10 xxx yyy" \ + "^invoke_set \\(c\\): \"xxx yyy\" True" + + send_gdb "\n" + gdb_test "" "^\r\ninvoke_set \\(c\\): \"xxx yyy\" True" \ + "repeat set prefix-10 xxx yyy" + + gdb_test "show prefix-10 xxx yyy" \ + "^invoke_show \\(d\\): \"xxx yyy\" True" + + send_gdb "\n" + gdb_test "" "^\r\ninvoke_show \\(d\\): \"xxx yyy\" True" \ + "repeat show prefix-10 xxx yyy" + + gdb_test "set prefix-8" \ + "^invoke_set \\(a\\): \"\" True" + + gdb_test "show prefix-8" \ + [make_show_prefix_re "prefix-8"] + + gdb_test "set prefix-9" \ + [make_sub_cmd_help_re "set" "prefix-9"] + + gdb_test "show prefix-9" \ + "^invoke_show \\(b\\): \"\" True" + + gdb_test "set prefix-10" \ + "^invoke_set \\(c\\): \"\" True" + + gdb_test "show prefix-10" \ + "^invoke_show \\(d\\): \"\" True" +} + +# Create ParameterPrefix sub-classes that make use of the +# dont_repeat() method. Check that the relevant set/show invoke +# callback doesn't repeat when an empty command is used. +proc_with_prefix test_dont_repeat {} { + gdb_test_multiline "ParameterPrefix with invoke_set and dont_repeat" \ + "python" "" \ + "class PrefixWithInvokeAndDoNotRepeatSet(gdb.ParameterPrefix):" "" \ + " def __init__(self, name):" "" \ + " super().__init__(name, gdb.COMMAND_NONE)" "" \ + " def invoke_set(self, args, from_tty):" "" \ + " self.dont_repeat()" "" \ + " print(f\"invoke_set: \\\"{args}\\\" {from_tty}\")" "" \ + " def invoke_show(self, args, from_tty):" "" \ + " print(f\"invoke_show: \\\"{args}\\\" {from_tty}\")" "" \ + "PrefixWithInvokeAndDoNotRepeatSet('prefix-11')" "" \ + "gdb.Parameter('prefix-11 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "class PrefixWithInvokeAndDoNotRepeatShow(gdb.ParameterPrefix):" "" \ + " def __init__(self, name):" "" \ + " super().__init__(name, gdb.COMMAND_NONE)" "" \ + " def invoke_set(self, args, from_tty):" "" \ + " print(f\"invoke_set: \\\"{args}\\\" {from_tty}\")" "" \ + " def invoke_show(self, args, from_tty):" "" \ + " self.dont_repeat()" "" \ + " print(f\"invoke_show: \\\"{args}\\\" {from_tty}\")" "" \ + "PrefixWithInvokeAndDoNotRepeatShow('prefix-12')" "" \ + "gdb.Parameter('prefix-12 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "end" + + gdb_test "set prefix-11 xxx yyy" \ + "^invoke_set: \"xxx yyy\" True" + + send_gdb "\n" + gdb_test "" "^" \ + "repeat set prefix-11 xxx yyy" + + gdb_test "show prefix-11 xxx yyy" \ + "^invoke_show: \"xxx yyy\" True" + + send_gdb "\n" + gdb_test "" "invoke_show: \"xxx yyy\" True" \ + "repeat show prefix-11 xxx yyy" + + gdb_test "set prefix-12 xxx yyy" \ + "^invoke_set: \"xxx yyy\" True" + + send_gdb "\n" + gdb_test "" "^\r\ninvoke_set: \"xxx yyy\" True" \ + "repeat set prefix-12 xxx yyy" + + gdb_test "show prefix-12 xxx yyy" \ + "^invoke_show: \"xxx yyy\" True" + + send_gdb "\n" + gdb_test "" "^" \ + "repeat show prefix-12 xxx yyy" +} + +# Create a parameter prefixm, and immediately add another prefix under +# the first. The important thing here is that the second prefix is +# created into an otherwise empty prefix as this triggered a bug at +# one point. +proc_with_prefix test_nested {} { + gdb_test_multiline "Create nested parameter prefixes" \ + "python" "" \ + "gdb.ParameterPrefix('prefix-13', gdb.COMMAND_NONE)" "" \ + "gdb.ParameterPrefix('prefix-13 prefix-14', gdb.COMMAND_NONE)" "" \ + "gdb.Parameter('prefix-13 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "gdb.Parameter('prefix-13 param-2', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "gdb.Parameter('prefix-13 prefix-14 param-3', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "gdb.Parameter('prefix-13 prefix-14 param-4', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "end" "" + + gdb_test "show prefix-13 prefix-14" \ + [multi_line \ + "^prefix-13 prefix-14 param-3: The current value of 'prefix-13 prefix-14 param-3' is \"off\"\\." \ + "prefix-13 prefix-14 param-4: The current value of 'prefix-13 prefix-14 param-4' is \"off\"\\."] + + gdb_test "show prefix-13" \ + [multi_line \ + "^prefix-13 param-1: The current value of 'prefix-13 param-1' is \"off\"\\." \ + "prefix-13 param-2: The current value of 'prefix-13 param-2' is \"off\"\\." \ + "prefix-13 prefix-14 param-3: The current value of 'prefix-13 prefix-14 param-3' is \"off\"\\." \ + "prefix-13 prefix-14 param-4: The current value of 'prefix-13 prefix-14 param-4' is \"off\"\\."] + + gdb_test "set prefix-13 prefix-14" \ + [multi_line \ + "" \ + "set prefix-13 prefix-14 param-3 -- Set the current value of 'prefix-13 prefix-14 param-3'\\." \ + "set prefix-13 prefix-14 param-4 -- Set the current value of 'prefix-13 prefix-14 param-4'\\." \ + "" \ + ".*"] + + gdb_test "set prefix-13" \ + [multi_line \ + "" \ + "set prefix-13 param-1 -- Set the current value of 'prefix-13 param-1'\\." \ + "set prefix-13 param-2 -- Set the current value of 'prefix-13 param-2'\\." \ + "set prefix-13 prefix-14 -- This command is not documented\\." \ + "" \ + ".*"] +} + +test_basic_usage +test_simple_sub_class +test_prefix_with_invoke +test_dont_repeat +test_nested diff --git a/gdb/testsuite/gdb.python/py-parameter.exp b/gdb/testsuite/gdb.python/py-parameter.exp index c15bef1..e676925 100644 --- a/gdb/testsuite/gdb.python/py-parameter.exp +++ b/gdb/testsuite/gdb.python/py-parameter.exp @@ -45,6 +45,9 @@ proc_with_prefix test_directories { } { } proc_with_prefix test_data_directory { } { + # Proc assumes local host. + require {!is_remote host} + clean_restart # Check we can correctly read the data-directory parameter. First, @@ -187,6 +190,8 @@ proc_with_prefix test_enum_parameter { } { # Test an color parameter. proc_with_prefix test_color_parameter { } { + require {!is_remote host} + global env with_ansi_styling_terminal { # This enables 256 colors support and disables colors approximation. @@ -346,6 +351,91 @@ proc_with_prefix test_really_undocumented_parameter { } { "test general help" } +# Test a parameter in which the __doc__ string is empty or None. +proc_with_prefix test_empty_doc_parameter {} { + gdb_test_multiline "empty __doc__ parameter" \ + "python" "" \ + "class EmptyDocParam(gdb.Parameter):" "" \ + " __doc__ = \"\"" "" \ + " def __init__(self, name):" "" \ + " super ().__init__(name, gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + " self.value = True" "" \ + "test_empty_doc_param = EmptyDocParam('print test-empty-doc-param')" ""\ + "end" + + # Setting the __doc__ string to empty means GDB will completely + # elide it from the output. + gdb_test "help set print test-empty-doc-param" \ + "^Set the current value of 'print test-empty-doc-param'\\." + + gdb_test_multiline "None __doc__ parameter" \ + "python" "" \ + "class NoneDocParam(gdb.Parameter):" "" \ + " __doc__ = None" "" \ + " def __init__(self, name):" "" \ + " super ().__init__(name, gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + " self.value = True" "" \ + "test_none_doc_param = NoneDocParam('print test-none-doc-param')" ""\ + "end" + + # Setting the __doc__ string to None, or anything else that isn't + # a string, causes GDB to use a default string instead. + gdb_test "help set print test-none-doc-param" \ + [multi_line \ + "^Set the current value of 'print test-none-doc-param'\\." \ + "This command is not documented\\."] +} + +# Test a parameter in which the set_doc/show_doc strings are either +# empty, or None. +proc_with_prefix test_empty_set_show_doc_parameter {} { + gdb_test_multiline "empty set/show doc parameter" \ + "python" "" \ + "class EmptySetShowParam(gdb.Parameter):" "" \ + " set_doc = \"\"" "" \ + " show_doc = \"\"" "" \ + " def __init__(self, name):" "" \ + " super ().__init__(name, gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + " self.value = True" "" \ + "test_empty_set_show_param = EmptySetShowParam('print test-empty-set-show-param')" ""\ + "end" + + # Setting the set_doc/show_doc string to empty means GDB will use + # a suitable default string. + gdb_test "help set print test-empty-set-show-param" \ + [multi_line \ + "^Set the current value of 'print test-empty-set-show-param'\\." \ + "This command is not documented\\."] + + gdb_test "help show print test-empty-set-show-param" \ + [multi_line \ + "^Show the current value of 'print test-empty-set-show-param'\\." \ + "This command is not documented\\."] + + gdb_test_multiline "None set/show doc parameter" \ + "python" "" \ + "class NoneSetShowParam(gdb.Parameter):" "" \ + " set_doc = None" "" \ + " show_doc = None" "" \ + " def __init__(self, name):" "" \ + " super ().__init__(name, gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + " self.value = True" "" \ + "test_none_set_show_param = NoneSetShowParam('print test-none-set-show-param')" ""\ + "end" + + # Setting the set_doc/show_doc string to None (or any non-string + # value) means GDB will use a suitable default string. + gdb_test "help set print test-none-set-show-param" \ + [multi_line \ + "^Set the current value of 'print test-none-set-show-param'\\." \ + "This command is not documented\\."] + + gdb_test "help show print test-none-set-show-param" \ + [multi_line \ + "^Show the current value of 'print test-none-set-show-param'\\." \ + "This command is not documented\\."] +} + # Test deprecated API. Do not use in your own implementations. proc_with_prefix test_deprecated_api_parameter { } { clean_restart @@ -669,6 +759,104 @@ proc_with_prefix test_ambiguous_parameter {} { "Parameter .* is ambiguous.*Error occurred in Python.*" gdb_test "python print(gdb.parameter('test-ambiguous-value-1a'))" \ "Could not find parameter.*Error occurred in Python.*" + + # Create command prefixs 'set foo1' and 'show foo1'. + gdb_test_no_output "python gdb.Command('set foo1', gdb.COMMAND_NONE, prefix=True)" + gdb_test_no_output "python gdb.Command('show foo1', gdb.COMMAND_NONE, prefix=True)" + + # Create a parameter under 'foo1', but use a truncated prefix. At + # this point though, the prefix is not ambiguous. + gdb_test_no_output "python gdb.Parameter('foo bar', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" + gdb_test "python print(gdb.parameter('foo1 bar'))" "False" + + # Create another prefix command, similar in name to the first. + gdb_test_no_output "python gdb.Command('set foo2', gdb.COMMAND_NONE, prefix=True)" + gdb_test_no_output "python gdb.Command('show foo2', gdb.COMMAND_NONE, prefix=True)" + + # An attempt to create a parameter using an ambiguous prefix will give an error. + gdb_test "python gdb.Parameter('foo baz', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" \ + [multi_line \ + "Python Exception <class 'RuntimeError'>: Could not find command prefix foo\\." \ + "Error occurred in Python: Could not find command prefix foo\\."] +} + +# Check that creating a gdb.Parameter with an unknown command prefix results in an error. +proc_with_prefix test_unknown_prefix {} { + gdb_test_multiline "create parameter" \ + "python" "" \ + "class UnknownPrefixParam(gdb.Parameter):" "" \ + " def __init__ (self, name):" "" \ + " super().__init__ (name, gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + " self.value = True" "" \ + "end" + + foreach prefix { "unknown-prefix" "style unknown-prefix" "style disassembler unknown-prefix"} { + gdb_test "python UnknownPrefixParam('$prefix new-param')" \ + [multi_line \ + "Python Exception <class 'RuntimeError'>: Could not find command prefix $prefix\\." \ + "Error occurred in Python: Could not find command prefix $prefix\\."] + } +} + +# Test the default behaviour of a set/show parameter prefix command. +proc_with_prefix test_set_show_parameters {} { + # This first set/show prefix command doesn't have an invoke + # method. As such, GDB installs the default invoke behaviour; set + # prints the full list of sub-commands, and show prints all the + # sub-command values. + gdb_test_multiline "Setup set/show parameter prefix with no invoke" \ + "python" "" \ + "class TestParamPrefix(gdb.Command):" "" \ + " \"\"\"TestParamPrefix documentation string.\"\"\"" "" \ + " def __init__(self, name):" "" \ + " super().__init__(name, gdb.COMMAND_NONE, prefix = True)" "" \ + "TestParamPrefix('set test-prefix')" "" \ + "TestParamPrefix('show test-prefix')" "" \ + "gdb.Parameter('test-prefix param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "gdb.Parameter('test-prefix param-2', gdb.COMMAND_NONE, gdb.PARAM_INTEGER)" "" \ + "gdb.Parameter('test-prefix param-3', gdb.COMMAND_NONE, gdb.PARAM_STRING)" "" \ + "end" + + gdb_test "set test-prefix" \ + [multi_line \ + "List of \"set test-prefix\" subcommands:" \ + "" \ + "set test-prefix param-1 -- Set the current value of 'test-prefix param-1'." \ + "set test-prefix param-2 -- Set the current value of 'test-prefix param-2'." \ + "set test-prefix param-3 -- Set the current value of 'test-prefix param-3'." \ + "" \ + "Type \"help set test-prefix\" followed by subcommand name for full documentation\\." \ + "Type \"apropos word\" to search for commands related to \"word\"\\." \ + "Type \"apropos -v word\" for full documentation of commands related to \"word\"\\." \ + "Command name abbreviations are allowed if unambiguous\\."] + + gdb_test "show test-prefix" \ + [multi_line \ + "test-prefix param-1: The current value of 'test-prefix param-1' is \"off\"\\." \ + "test-prefix param-2: The current value of 'test-prefix param-2' is \"0\"\\." \ + "test-prefix param-3: The current value of 'test-prefix param-3' is \"\"\\."] + + # This next set/show prefix has an invoke method, which will be + # called instead of the default behaviour tested above. + gdb_test_multiline "Setup set/show parameter prefix with invoke" \ + "python" "" \ + "class TestParamPrefix(gdb.Command):" "" \ + " \"\"\"TestParamPrefix documentation string.\"\"\"" "" \ + " def __init__(self, name, mode):" "" \ + " self._mode = mode" "" \ + " super().__init__(self._mode + ' ' + name, gdb.COMMAND_NONE, prefix = True)" "" \ + " def invoke(self, args, from_tty):" "" \ + " print('invoke -- ' + self._mode)" "" \ + "TestParamPrefix('test-prefix-2', 'set')" "" \ + "TestParamPrefix('test-prefix-2', 'show')" "" \ + "gdb.Parameter('test-prefix-2 param-1', gdb.COMMAND_NONE, gdb.PARAM_BOOLEAN)" "" \ + "gdb.Parameter('test-prefix-2 param-2', gdb.COMMAND_NONE, gdb.PARAM_INTEGER)" "" \ + "gdb.Parameter('test-prefix-2 param-3', gdb.COMMAND_NONE, gdb.PARAM_STRING)" "" \ + "end" + + gdb_test "set test-prefix-2" "^invoke -- set" + + gdb_test "show test-prefix-2" "^invoke -- show" } test_directories @@ -679,11 +867,15 @@ test_color_parameter test_file_parameter test_undocumented_parameter test_really_undocumented_parameter +test_empty_doc_parameter +test_empty_set_show_doc_parameter test_deprecated_api_parameter test_gdb_parameter test_integer_parameter test_throwing_parameter test_language test_ambiguous_parameter +test_unknown_prefix +test_set_show_parameters rename py_param_test_maybe_no_output "" diff --git a/gdb/testsuite/gdb.python/py-source-styling-2.exp b/gdb/testsuite/gdb.python/py-source-styling-2.exp index b13ee1f..ebf7f32 100644 --- a/gdb/testsuite/gdb.python/py-source-styling-2.exp +++ b/gdb/testsuite/gdb.python/py-source-styling-2.exp @@ -32,7 +32,9 @@ if { [build_executable "failed to build" $testfile $srcfile $opts] == -1 } { return } -clean_restart +with_ansi_styling_terminal { + clean_restart +} gdb_test_no_output "maint set gnu-source-highlight enabled off" @@ -40,16 +42,14 @@ gdb_load $binfile require {gdb_py_module_available pygments} -with_ansi_styling_terminal { - gdb_test_no_output "set style enabled on" - - gdb_test_multiple "list $line_number" "Styling of c++ keyword try" { - -re -wrap " try\r\n.*" { - # Unstyled. - fail $gdb_test_name - } - -re -wrap "" { - pass $gdb_test_name - } +gdb_test_no_output "set style enabled on" + +gdb_test_multiple "list $line_number" "Styling of c++ keyword try" { + -re -wrap " try\r\n.*" { + # Unstyled. + fail $gdb_test_name + } + -re -wrap "" { + pass $gdb_test_name } } diff --git a/gdb/testsuite/gdb.python/py-symbol.exp b/gdb/testsuite/gdb.python/py-symbol.exp index 55cdebe..dfc435e 100644 --- a/gdb/testsuite/gdb.python/py-symbol.exp +++ b/gdb/testsuite/gdb.python/py-symbol.exp @@ -100,7 +100,6 @@ gdb_test_multiple $cmd "print value of rr" { fail $gdb_test_name } } - gdb_test "python print (gdb.lookup_static_symbol ('rr').needs_frame)" \ "False" \ diff --git a/gdb/testsuite/gdb.python/py-warning.exp b/gdb/testsuite/gdb.python/py-warning.exp new file mode 100644 index 0000000..6b26a4e --- /dev/null +++ b/gdb/testsuite/gdb.python/py-warning.exp @@ -0,0 +1,63 @@ +# Copyright (C) 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test the gdb.warning() function. + +load_lib gdb-python.exp + +require allow_python_tests + +clean_restart + +# Basic usage. +gdb_test "python gdb.warning(\"some text\")" \ + "warning: some text" + +# Basic usage with named argument. +gdb_test "python gdb.warning(text=\"a warning message\")" \ + "warning: a warning message" + +# Make sure GDB prints format specifiers correctly. +gdb_test "python gdb.warning(\"%s %d %p\")" \ + "warning: %s %d %p" + +# Empty string gives an error. +gdb_test "python gdb.warning(\"\")" \ + [multi_line \ + "Python Exception <class 'ValueError'>: Empty text string passed to gdb\\.warning" \ + "Error occurred in Python: Empty text string passed to gdb\\.warning"] + +# Missing argument gives an error. +set re1 \ + [multi_line \ + [string_to_regexp \ + [concat \ + "Python Exception <class 'TypeError'>:" \ + "function missing required argument 'text' (pos 1)"]] \ + [string_to_regexp \ + [concat \ + "Error occurred in Python:" \ + "function missing required argument 'text' (pos 1)"]]] +set re2 \ + [multi_line \ + [string_to_regexp \ + [concat \ + "Python Exception <class 'TypeError'>:" \ + "Required argument 'text' (pos 1) not found"]] \ + [string_to_regexp \ + [concat \ + "Error occurred in Python:" \ + "Required argument 'text' (pos 1) not found"]]] +gdb_test "python gdb.warning()" $re1|$re2 diff --git a/gdb/testsuite/gdb.python/python.exp b/gdb/testsuite/gdb.python/python.exp index 6b2f671..96977df 100644 --- a/gdb/testsuite/gdb.python/python.exp +++ b/gdb/testsuite/gdb.python/python.exp @@ -152,13 +152,7 @@ gdb_test_no_output "set height $lines" set test "verify pagination beforehand" gdb_test_multiple "python print (\"\\n\" * $lines)" $test { - -re "--Type <RET>" { - exp_continue - } - -re " for more, q to quit" { - exp_continue - } - -re ", c to continue without paging--$" { + -re "$pagination_prompt$" { pass $test } } @@ -168,13 +162,7 @@ gdb_test "python if gdb.execute('python print (\"\\\\n\" * $lines)', to_string=T set test "verify pagination afterwards" gdb_test_multiple "python print (\"\\n\" * $lines)" $test { - -re "--Type <RET>" { - exp_continue - } - -re " for more, q to quit" { - exp_continue - } - -re ", c to continue without paging--$" { + -re "$pagination_prompt$" { pass $test } } diff --git a/gdb/testsuite/gdb.replay/connect.exp b/gdb/testsuite/gdb.replay/connect.exp index 5790d38..26b7aa3 100644 --- a/gdb/testsuite/gdb.replay/connect.exp +++ b/gdb/testsuite/gdb.replay/connect.exp @@ -13,7 +13,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. */ # -# Starts a communication with gdbsever setting the remotelog file. +# Starts a communication with gdbserver setting the remotelog file. # Modifies the remotelog with update_log proc, injects an error message # instead of the expected replay to the vMustReplyEmpty packet in order # to test GDB reacts to the error response properly. After the remotelog diff --git a/gdb/testsuite/gdb.reverse/i386-avx-reverse.c b/gdb/testsuite/gdb.reverse/i386-avx-reverse.c index a37b65a..bf6cb77 100644 --- a/gdb/testsuite/gdb.reverse/i386-avx-reverse.c +++ b/gdb/testsuite/gdb.reverse/i386-avx-reverse.c @@ -30,6 +30,18 @@ char global_buf1[] = {0, 0, 0, 0, 0, 0, 0, 0, char *dyn_buf0; char *dyn_buf1; + /* Zero memory regions again, so that future tests can update them + without worry. */ +void +reset_buffers () +{ + for (int i = 0; i < 32; i++) + { + global_buf1[i] = 0; + dyn_buf1[i] = 0; + } +} + int vmov_test () { @@ -168,6 +180,22 @@ vmov_test () asm volatile ("vmovapd %%xmm0, %0" : : "m"(*dyn_buf1)); asm volatile ("vmovaps %%ymm15, %0" : : "m"(*dyn_buf1)); + /* Testing vmov[hl|lh]ps and vmov[h|l]pd. */ + asm volatile ("vmovhlps %xmm1, %xmm8, %xmm0"); + asm volatile ("vmovhlps %xmm1, %xmm2, %xmm15"); + asm volatile ("vmovlhps %xmm1, %xmm8, %xmm0"); + asm volatile ("vmovlhps %xmm1, %xmm2, %xmm15"); + + asm volatile ("vmovhps %0, %%xmm1, %%xmm0" : : "m"(buf0)); + asm volatile ("vmovhps %%xmm0, %0" : "=m" (buf1)); + asm volatile ("vmovhpd %0, %%xmm1, %%xmm15" : : "m"(global_buf0)); + asm volatile ("vmovhpd %%xmm15, %0" : "=m" (global_buf1)); + asm volatile ("vmovlpd %0, %%xmm1, %%xmm15" : : "m"(*dyn_buf0)); + asm volatile ("vmovlpd %%xmm15, %0" : "=m" (*dyn_buf1)); + + asm volatile ("vmovddup %xmm1, %xmm15"); + asm volatile ("vmovddup %ymm2, %ymm0"); + /* We have a return statement to deal with epilogue in different compilers. */ return 0; /* end vmov_test */ @@ -245,7 +273,7 @@ vpunpck_test () return 0; /* end vpunpck_test */ } -/* Test if we can record vpbroadcast instructions. */ +/* Test if we can record vpbroadcast and vbroadcast instructions. */ int vpbroadcast_test () { @@ -268,6 +296,14 @@ vpbroadcast_test () asm volatile ("vpbroadcastq %xmm1, %ymm0"); asm volatile ("vpbroadcastq %xmm1, %ymm15"); + asm volatile ("vbroadcastss %xmm1, %xmm0"); + asm volatile ("vbroadcastss %xmm1, %ymm15"); + asm volatile ("vbroadcastss %0, %%ymm0" : : "m" (global_buf0)); + asm volatile ("vbroadcastss %0, %%xmm15": : "m" (*dyn_buf0)); + asm volatile ("vbroadcastsd %xmm1, %ymm0"); + asm volatile ("vbroadcastsd %0, %%ymm15": : "m" (global_buf0)); + asm volatile ("vbroadcastf128 %0, %%ymm0" : : "m" (*dyn_buf0)); + /* We have a return statement to deal with epilogue in different compilers. */ return 0; /* end vpbroadcast_test */ @@ -372,6 +408,7 @@ arith_test () /* Using GDB, load these values onto registers for testing. ymm0.v8_float = {0.5, 1.5, 2.5, 3.5, 4.5, 5.5, 6.5, 7.5} ymm1.v8_float = {0.5, 1.5, 2.5, 3.5, 4.5, 5.5, 6.5, 7.5} + ymm2.v2_int128 = {0x0, 0x0} ymm15.v2_int128 = {0x0, 0x0} this way it's easy to confirm we're undoing things correctly. */ asm volatile ("vaddps %xmm0, %xmm1, %xmm15"); @@ -416,9 +453,318 @@ arith_test () asm volatile ("vmaxss %xmm0, %xmm1, %xmm15"); asm volatile ("vmaxsd %xmm0, %xmm1, %xmm15"); + /* Some sanity checks for other arithmetic instructions. */ + asm volatile ("vpaddb %xmm0, %xmm1, %xmm2"); + asm volatile ("vpaddw %xmm0, %xmm1, %xmm15"); + asm volatile ("vpaddd %ymm0, %ymm1, %ymm2"); + asm volatile ("vpaddq %ymm0, %ymm1, %ymm15"); + + asm volatile ("vpmullw %xmm0, %xmm1, %xmm2"); + asm volatile ("vpmulld %xmm0, %xmm1, %xmm15"); + asm volatile ("vpmulhw %ymm0, %ymm1, %ymm2"); + asm volatile ("vpmulhuw %ymm0, %ymm1, %ymm15"); + asm volatile ("vpmuludq %ymm0, %ymm1, %ymm15"); + + asm volatile ("vxorps %xmm0, %xmm1, %xmm2"); + asm volatile ("vxorpd %ymm0, %ymm1, %ymm2"); + asm volatile ("vpand %xmm0, %xmm1, %xmm15"); + asm volatile ("vpandn %ymm0, %ymm1, %ymm15"); + + asm volatile ("vpsadbw %xmm0, %xmm1, %xmm2"); + asm volatile ("vpsadbw %ymm0, %ymm1, %ymm15"); + return 0; /* end arith_test */ } +int +vaddsubpd_test () +{ + /* start vaddsubpd_test */ + /* YMM test. */ + asm volatile ("vaddsubpd %ymm15,%ymm1,%ymm0"); + asm volatile ("vaddsubpd %ymm0,%ymm1,%ymm15"); + asm volatile ("vaddsubpd %ymm2,%ymm3,%ymm4"); + + /* XMM test. */ + asm volatile ("vaddsubpd %xmm15,%xmm1,%xmm2"); + asm volatile ("vaddsubpd %xmm0,%xmm1,%xmm10"); + return 0; /* end vaddsubpd_test */ +} + +int +vaddsubps_test () +{ + /* start vaddsubps_test */ + /* YMM test. */ + asm volatile ("vaddsubps %ymm15,%ymm1,%ymm2"); + asm volatile ("vaddsubps %ymm0,%ymm1,%ymm10"); + asm volatile ("vaddsubps %ymm2,%ymm3,%ymm4"); + + /* XMM test. */ + asm volatile ("vaddsubps %xmm0,%xmm1,%xmm15"); + asm volatile ("vaddsubps %xmm15,%xmm1,%xmm0"); + return 0; /* end vaddsubps_test */ +} + + +/* Test record shifting instructions. */ +int +shift_test () +{ + /* start shift_test. */ + /* Using GDB, load these values onto registers for testing. + ymm0.v2_int128 = {0, 0} + ymm1.v16_int16 = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16} + xmm2.uint128 = 1 + ymm15.v2_int128 = {0x0, 0x0} + this way it's easy to confirm we're undoing things correctly. */ + + asm volatile ("vpsllw $1, %xmm1, %xmm0"); + asm volatile ("vpsllw %xmm2, %ymm1, %ymm0"); + asm volatile ("vpslld $3, %ymm1, %ymm15"); + asm volatile ("vpslld %xmm2, %xmm1, %xmm15"); + asm volatile ("vpsllq $5, %xmm1, %xmm15"); + asm volatile ("vpsllq %xmm2, %ymm1, %ymm15"); + + asm volatile ("vpsraw $1, %xmm1, %xmm0"); + asm volatile ("vpsraw %xmm2, %ymm1, %ymm0"); + asm volatile ("vpsrad $3, %ymm1, %ymm15"); + asm volatile ("vpsrad %xmm2, %xmm1, %xmm15"); + + asm volatile ("vpsrlw $1, %xmm1, %xmm0"); + asm volatile ("vpsrlw %xmm2, %ymm1, %ymm0"); + asm volatile ("vpsrld $3, %ymm1, %ymm15"); + asm volatile ("vpsrld %xmm2, %xmm1, %xmm15"); + asm volatile ("vpsrlq $5, %xmm1, %xmm15"); + asm volatile ("vpsrlq %xmm2, %ymm1, %ymm15"); + + /* The dq version is treated separately in the manual, so + we test it separately just to be sure. */ + asm volatile ("vpslldq $1, %xmm1, %xmm0"); + asm volatile ("vpslldq $2, %ymm1, %ymm0"); + asm volatile ("vpslldq $3, %xmm1, %xmm15"); + asm volatile ("vpslldq $4, %ymm1, %ymm15"); + + asm volatile ("vpsrldq $1, %xmm1, %xmm0"); + asm volatile ("vpsrldq $2, %ymm1, %ymm0"); + asm volatile ("vpsrldq $3, %xmm1, %xmm15"); + asm volatile ("vpsrldq $4, %ymm1, %ymm15"); + + return 0; /* end shift_test */ +} + +int +shuffle_test () +{ + /* start shuffle_test. */ + /* Using GDB, load these values onto registers for testing. + ymm0.v2_int128 = {0, 0} + ymm1.v16_int16 = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16} + ymm2.v16_int15 = {17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32} + ymm15.v2_int128 = {0x0, 0x0} + this way it's easy to confirm we're undoing things correctly. */ + + asm volatile ("vpshufb %xmm1, %xmm2, %xmm0"); + asm volatile ("vpshufb %ymm1, %ymm2, %ymm15"); + asm volatile ("vpshufd $1, %ymm2, %ymm0"); + asm volatile ("vpshufd $2, %xmm2, %xmm15"); + + asm volatile ("vpshufhw $3, %xmm2, %xmm0"); + asm volatile ("vpshufhw $4, %ymm2, %ymm15"); + asm volatile ("vpshuflw $5, %ymm2, %ymm0"); + asm volatile ("vpshuflw $6, %xmm2, %xmm15"); + + asm volatile ("vshufps $1, %xmm1, %xmm2, %xmm0"); + asm volatile ("vshufps $2, %ymm1, %ymm2, %ymm15"); + asm volatile ("vshufpd $4, %ymm1, %ymm2, %ymm0"); + asm volatile ("vshufpd $8, %xmm1, %xmm2, %xmm15"); + + return 0; /* end shuffle_test */ +} + +int +permute_test () +{ + /* start permute_test. */ + /* Using GDB, load these values onto registers for testing. + ymm0.v2_int128 = {0, 0} + ymm1.v16_int16 = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16} + ymm2.v16_int16 = {17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32} + ymm15.v2_int128 = {0x0, 0x0} + eax = 0 + this way it's easy to confirm we're undoing things correctly. */ + asm volatile ("vperm2f128 $1, %ymm1, %ymm2, %ymm0"); + asm volatile ("vperm2f128 $0, %ymm1, %ymm2, %ymm15"); + asm volatile ("vperm2i128 $1, %ymm2, %ymm1, %ymm0"); + asm volatile ("vperm2i128 $0, %ymm2, %ymm1, %ymm15"); + + asm volatile ("vpermd %ymm1, %ymm2, %ymm0"); + asm volatile ("vpermd %ymm1, %ymm2, %ymm15"); + asm volatile ("vpermq $1, %ymm1, %ymm0"); + asm volatile ("vpermq $0, %ymm2, %ymm15"); + + asm volatile ("vpermilpd %ymm1, %ymm2, %ymm0"); + asm volatile ("vpermilpd %xmm1, %xmm2, %xmm15"); + asm volatile ("vpermilpd $1, %ymm2, %ymm15"); + asm volatile ("vpermilpd $0, %xmm2, %xmm0"); + asm volatile ("vpermilps %ymm1, %ymm2, %ymm0"); + asm volatile ("vpermilps %xmm1, %xmm2, %xmm15"); + asm volatile ("vpermilps $1, %ymm2, %ymm15"); + asm volatile ("vpermilps $0, %xmm2, %xmm0"); + + asm volatile ("vpermpd $0, %ymm1, %ymm15"); + asm volatile ("vpermpd $0, %ymm2, %ymm0"); + asm volatile ("vpermps %ymm1, %ymm2, %ymm0"); + asm volatile ("vpermps %ymm1, %ymm2, %ymm15"); + + return 0; /* end permute_test */ +} + +int +extract_insert_test () +{ + /* start extract_insert_test. */ + /* Using GDB, load these values onto registers for testing. + ymm0.v2_int128 = {0, 0} + ymm1.v16_int16 = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16} + xmm2.uint128 = 0xcafe + ymm15.v2_int128 = {0x0, 0x0} + eax = 0 + this way it's easy to confirm we're undoing things correctly. */ + + asm volatile ("vinserti128 $1, %xmm2, %ymm1, %ymm0"); + asm volatile ("vinsertf128 $0, %xmm2, %ymm1, %ymm15"); + asm volatile ("vextracti128 $1, %ymm1, %xmm0"); + asm volatile ("vextractf128 $0, %ymm1, %xmm15"); + asm volatile ("vinsertps $16, %xmm2, %xmm1, %xmm0"); + asm volatile ("vextractps $0, %xmm2, %rax"); + + asm volatile ("vpextrb $5, %xmm1, %rax"); + asm volatile ("vpextrb $4, %%xmm1, %0" : "=m" (global_buf1)); + asm volatile ("vpextrd $3, %xmm1, %eax"); + asm volatile ("vpextrd $2, %%xmm1, %0" : "=m" (global_buf1)); + asm volatile ("vpextrq $1, %xmm1, %rax"); + asm volatile ("vpextrq $0, %%xmm1, %0" : "=m" (global_buf1)); + + asm volatile ("vpinsrb $3, %rax, %xmm2, %xmm0"); + asm volatile ("vpinsrw $2, %eax, %xmm2, %xmm15"); + asm volatile ("vpinsrd $1, %eax, %xmm2, %xmm0"); + asm volatile ("vpinsrq $0, %rax, %xmm2, %xmm15"); + + /* vpextrw has completely different mechanics to other vpextr + instructions, so separate them for ease of testing later. */ + asm volatile ("vpextrw $1, %xmm1, %eax"); + asm volatile ("vpextrw $1, %%xmm1, %0" : "=m" (global_buf1)); + + return 0; /* end extract_insert_test */ +} + +int +blend_test () +{ + /* start blend_test. */ + /* Using GDB, load these values onto registers for testing. + ymm0.v2_int128 = {0, 0} + ymm1.v16_int16 = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16} + ymm2.v16_int16 = {17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32} + ymm15.v2_int128 = {0x0, 0x0} + this way it's easy to confirm we're undoing things correctly. */ + + asm volatile ("vblendps $5, %xmm1, %xmm2, %xmm0"); + asm volatile ("vblendpd $10, %ymm1, %ymm2, %ymm15"); + asm volatile ("vblendvps %ymm15, %ymm1, %ymm2, %ymm0"); + asm volatile ("vblendvpd %xmm0, %xmm1, %xmm2, %xmm15"); + + asm volatile ("vpblendw $94, %ymm1, %ymm2, %ymm15"); + asm volatile ("vpblendw $47, %xmm1, %xmm2, %xmm0"); + asm volatile ("vpblendd $22, %ymm1, %ymm2, %ymm0"); + asm volatile ("vpblendd $11, %xmm1, %xmm2, %xmm15"); + asm volatile ("vpblendvb %xmm0, %xmm1, %xmm2, %xmm15"); + asm volatile ("vpblendvb %ymm0, %ymm1, %ymm2, %ymm0"); + + return 0; /* end blend_test */ +} + +int +compare_test () +{ + /* start compare_test. */ + /* Using GDB, load these values onto registers for testing. + xmm0.v4_float = {0, 1.5, 2, 0} + xmm1.v4_float = {0, 1, 2.5, -1} + xmm15.v4_float = {-1, -2, 10, 100} + eflags = 2 + eflags can't be set to some values, if we set it to 0, it'll + be reset to 2, so set it to that directly to make results less + confusing. + this way it's easy to confirm we're undoing things correctly. */ + + asm volatile ("vcomisd %xmm0, %xmm1"); + asm volatile ("vcomiss %xmm15, %xmm1"); + asm volatile ("vucomiss %xmm1, %xmm15"); + asm volatile ("vucomisd %xmm15, %xmm0"); + + return 0; /* end compare_test */ +} + +int +pack_test () +{ + /* start pack_test. */ + /* Using GDB, load these values onto registers for testing. + xmm0.v4_float = {0, 1.5, 2, 0} + xmm1.v4_float = {0, 1, 2.5, -1} + xmm2.v4_float = {0, 1, 2.5, -1} + xmm15.v4_float = {-1, -2, 10, 100} + this way it's easy to confirm we're undoing things correctly. */ + + asm volatile ("vpacksswb %xmm1, %xmm2, %xmm0"); + asm volatile ("vpacksswb %ymm1, %ymm2, %ymm15"); + asm volatile ("vpackssdw %xmm1, %xmm2, %xmm15"); + asm volatile ("vpackssdw %ymm1, %ymm2, %ymm0"); + asm volatile ("vpackuswb %xmm1, %xmm2, %xmm0"); + asm volatile ("vpackuswb %ymm1, %ymm2, %ymm15"); + asm volatile ("vpackusdw %xmm1, %xmm2, %xmm15"); + asm volatile ("vpackusdw %ymm1, %ymm2, %ymm0"); + + return 0; /* end pack_test */ +} + +int +convert_test () +{ + /* start convert_test. */ + /* Using GDB, load these values onto registers for testing. + xmm0.v2_int128 = {0, 0} + xmm1.v4_float = {0, 1, 2.5, 10} + xmm15.v2_int128 = {0, 0} + ecx = -1 + ebx = 0 + this way it's easy to confirm we're undoing things correctly. */ + + asm volatile ("vcvtdq2ps %xmm1, %xmm0"); + asm volatile ("vcvtdq2pd %xmm1, %xmm15"); + + asm volatile ("vcvtps2dq %xmm1, %xmm15"); + asm volatile ("vcvtps2pd %xmm1, %xmm0"); + asm volatile ("vcvtpd2ps %xmm1, %xmm15"); + asm volatile ("vcvtpd2dq %xmm1, %xmm0"); + + asm volatile ("vcvtsd2si %xmm1, %rbx"); + asm volatile ("vcvtsd2ss %xmm0, %xmm1, %xmm15"); + asm volatile ("vcvtsi2sd %rcx, %xmm1, %xmm0"); + asm volatile ("vcvtsi2ss %rcx, %xmm1, %xmm15"); + asm volatile ("vcvtss2sd %xmm15, %xmm1, %xmm0"); + asm volatile ("vcvtss2si %xmm1, %rbx"); + + asm volatile ("vcvttpd2dq %xmm1, %xmm0"); + asm volatile ("vcvttps2dq %xmm1, %xmm15"); + asm volatile ("vcvttsd2si %xmm0, %rbx"); + asm volatile ("vcvttss2si %xmm1, %ecx"); + + return 0; /* end convert_test */ +} + /* This include is used to allocate the dynamic buffer and have the pointers aligned to a 32-bit boundary, so we can test instructions that require aligned memory. */ @@ -442,6 +788,7 @@ main () asm volatile ("vmovq %0, %%xmm15": : "m" (global_buf1)); vmov_test (); + reset_buffers (); vpunpck_test (); vpbroadcast_test (); vzeroupper_test (); @@ -449,5 +796,15 @@ main () vpcmpeq_test (); vpmovmskb_test (); arith_test (); + vaddsubpd_test (); + vaddsubps_test (); + shift_test (); + shuffle_test (); + permute_test (); + extract_insert_test (); + blend_test (); + compare_test (); + pack_test (); + convert_test (); return 0; /* end of main */ } diff --git a/gdb/testsuite/gdb.reverse/i386-avx-reverse.exp b/gdb/testsuite/gdb.reverse/i386-avx-reverse.exp index 0ff56dd..fb04260 100644 --- a/gdb/testsuite/gdb.reverse/i386-avx-reverse.exp +++ b/gdb/testsuite/gdb.reverse/i386-avx-reverse.exp @@ -149,6 +149,33 @@ global decimal if {[record_full_function "vmov"] == true} { # Now execute backwards, checking all instructions. + test_one_register "vmovddup" "ymm0" \ + "0x3736353433323130c004000000000000, 0x0" + test_one_register "vmovddup" "ymm15" \ + "0x2726252423222120, 0x0" + test_one_memory "vmovlpd" "dyn_buf1" \ + "\\\{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x28" \ + true + test_one_register "vmovlpd" "ymm15" \ + "0x1716151413121110c004000000000000, 0x0" + test_one_memory "vmovhpd" "global_buf1" \ + "\\\{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x18" + test_one_register "vmovhpd" "ymm15" \ + "0xc004000000000000c004000000000000, 0x0" + test_one_memory "vmovhps" "buf1" \ + "\\\{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x38" + test_one_register "vmovhps" "ymm0" \ + "0xc004000000000000c004000000000000, 0x0" + + test_one_register "vmovlhps" "ymm15" \ + "0x0, 0x0" + test_one_register "vmovlhps" "ymm0" \ + "0x0, 0x0" + test_one_register "vmovhlps" "ymm15" \ + "0x2f2e2d2c2b2a29280000000000000000, 0x2f2e2d2c2b2a29282726252423222120" + test_one_register "vmovhlps" "ymm0" \ + "0x2f2e2d2c2b2a29282726252423222120, 0x0" + # Explicitly test for the start of the array, since the value repeats. test_one_memory "vmovaps" "dyn_buf1" \ "\\\{0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28" true @@ -365,6 +392,24 @@ gdb_test_no_output "set \$xmm1.v2_int64 = {0x1716151413121110, 0x1f1e1d1c1b1a191 "set xmm1 for vpbroadcast" gdb_test_no_output "set \$ymm15.v2_int128 = {0x0, 0x0}" "set xmm15 for vpbroadcast" if {[record_full_function "vpbroadcast"] == true} { + test_one_register "vbroadcastf128" "ymm0" \ + "0x17161514131211101716151413121110, 0x17161514131211101716151413121110" + test_one_register "vbroadcastsd" "ymm15" \ + "0x23222120232221202322212023222120, 0x0" + test_one_register "vbroadcastsd" "ymm0" \ + "0x13121110131211101312111013121110, 0x13121110131211101312111013121110" + + test_one_register "vbroadcastss" "ymm15" \ + "0x13121110131211101312111013121110, 0x13121110131211101312111013121110" \ + "broadcast from memory" + test_one_register "vbroadcastss" "ymm0" \ + "0x13121110131211101312111013121110, 0x0" \ + "broadcast from memory" + test_one_register "vbroadcastss" "ymm15" \ + "0x17161514131211101716151413121110, 0x17161514131211101716151413121110" + test_one_register "vbroadcastss" "ymm0" \ + "0x17161514131211101716151413121110, 0x17161514131211101716151413121110" + test_one_register "vpbroadcastq" "ymm15" "0x13121110131211101312111013121110, 0x0" test_one_register "vpbroadcastq" "ymm0" "0x13121110131211101312111013121110, 0x0" @@ -397,7 +442,7 @@ gdb_test_no_output "set \$ymm15.v2_int128 = {0x0, 0xcafeface}" "set ymm15 for vp if {[record_full_function "vzeroupper"] == true} { # Since vzeroupper needs to save 8 or 16 registers, let's check what was # actually recorded, instead of just undoing an instruction. Only - # really check the values of egisters 0, 1, 2 and 15 because those are + # really check the values of registers 0, 1, 2 and 15 because those are # the only ones we're setting. gdb_test "maint print record-instruction" \ [multi_line "Register ymm0h changed: 74565" \ @@ -527,9 +572,43 @@ gdb_test_no_output \ "set \$ymm0.v8_float = {0.5, 1.5, 2.5, 3.5, 4.5, 5.5, 6.5, 7.5}" gdb_test_no_output \ "set \$ymm1.v8_float = {0, 1, 2, 3, 4, 5, 6, 7}" +gdb_test_no_output "set \$ymm2.v2_int128 = {0,0}" gdb_test_no_output "set \$ymm15.v2_int128 = {0,0}" if {[record_full_function "arith"] == true} { + test_one_register "vpsadbw" "ymm15" \ + "0x20000000200000004000003f000000, 0x100000001000000010000000100000" + test_one_register "vpsadbw" "ymm2" \ + "0x20000000200000004000003f000000, 0x100000001000000010000000100000" + test_one_register "vpandn" "ymm15" \ + "0x40400000400000003f80000000000000, 0x0" + test_one_register "vpand" "ymm15" \ + "0x10080000000000000000000000000000, 0x10649c00000000001044480000000000" + test_one_register "vxorpd" "ymm2" \ + "0x20000000200000004000003f000000, 0x0" + test_one_register "vxorps" "ymm2" \ + "0x10280000100800000fd0000000000000, 0x10740000106400001054000010440000" + + test_one_register "vpmuludq" "ymm15" \ + "0x10280000100800000fd0000000000000, 0x10740000106400001054000010440000" + test_one_register "vpmulhuw" "ymm15" \ + "0x0, 0x0" + test_one_register "vpmulhw" "ymm2" \ + "0x18000000000000002000000000000000, 0x0" + test_one_register "vpmulld" "ymm15" \ + "0x80a00000802000007f4000003f000000, 0x81d00000819000008150000081100000" + test_one_register "vpmullw" "ymm2" \ + "0x80a00000802000007f4000003f000000, 0x81d00000819000008150000081100000" + + test_one_register "vpaddq" "ymm15" \ + "0x80a00000802000007f4000003f000000, 0x0" + test_one_register "vpaddd" "ymm2" \ + "0x80a00000802000007e4000003f000000, 0x0" + test_one_register "vpaddw" "ymm15" \ + "0x40400000400000003fc000003f000000, 0x0" + test_one_register "vpaddb" "ymm2" \ + "0x0, 0x0" + test_one_register "vmaxsd" "ymm15" \ "0x40400000400000003f8000003f000000, 0x0" "ymm operation: " test_one_register "vmaxss" "ymm15" \ @@ -626,3 +705,493 @@ if {[record_full_function "arith"] == true} { } gdb_test "finish" "Run till exit from.*arith_test.*" \ "leaving arith" + +# Preparation and testing vaddsubpd instructions + +gdb_test_no_output "set \$ymm15.v2_int128 = {0xcafeface, 0xcafeface}" \ + "set ymm15 for vaddsubpd" +gdb_test_no_output "set \$ymm0.v2_int128 = {0xcafeface, 0xcafeface}" \ + "set ymm0 for vaddsubpd" +gdb_test_no_output "set \$xmm2.uint128 = 0xbeef" \ + "set xmm2 for vaddsubpd" +gdb_test_no_output "set \$xmm10.uint128 = 0xbeef" \ + "set xmm10 for vaddsubpd" +gdb_test_no_output "set \$ymm3.v2_int128 = {0xcafeface, 0xcafeface}" \ + "set ymm3 for vaddsubpd" +gdb_test_no_output "set \$ymm4.v2_int128 = {0xcafeface, 0xcafeface}" \ + "set ymm4 for vaddsubpd" + +if {[record_full_function "vaddsubpd"] == true} { + test_one_register "vaddsubpd" "xmm10" \ + "0xbeef" "xmm10:" + test_one_register "vaddsubpd" "xmm2" \ + "0xbeef" "xmm2:" + test_one_register "vaddsubpd" "ymm4" \ + "0xcafeface, 0xcafeface" "ymm4: " + test_one_register "vaddsubpd" "ymm15" \ + "0xcafeface, 0xcafeface" "ymm15: " + test_one_register "vaddsubpd" "ymm0" \ + "0xcafeface, 0xcafeface" "ymm0: " + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for vaddsubpd_test" +} else { + untested "couldn't run vaddsubpd tests" +} +gdb_test "finish" "Run till exit from.*vaddsubpd_test.*" \ + "leaving vaddsubpd" + +# Preparation and testing vaddsubps instruction + +gdb_test_no_output "set \$ymm10.v2_int128 = {0xcafeface, 0xcafeface}" \ + "set ymm10 for vaddsubps" +gdb_test_no_output "set \$ymm2.v2_int128 = {0xcafeface, 0xcafeface}" \ + "set ymm2 for vaddsubps" +gdb_test_no_output "set \$xmm15.uint128 = 0xbeef" \ + "set xmm15 for vaddsubps" +gdb_test_no_output "set \$xmm0.uint128 = 0xbeef" \ + "set xmm0 for vaddsubps" +gdb_test_no_output "set \$ymm3.v2_int128 = {0xcafeface, 0xcafeface}" \ + "set ymm3 for vaddsubps" +gdb_test_no_output "set \$ymm4.v2_int128 = {0xcafeface, 0xcafeface}" \ + "set ymm4 for vaddsubps" + +if {[record_full_function "vaddsubps"] == true} { + test_one_register "vaddsubps" "xmm0" \ + "0xbeef" "xmm0: " + test_one_register "vaddsubps" "xmm15" \ + "0xbeef" "xmm15: " + test_one_register "vaddsubps" "ymm4" \ + "0xcafeface, 0xcafeface" "ymm4: " + test_one_register "vaddsubps" "ymm10" \ + "0xcafeface, 0xcafeface" "ymm10: " + test_one_register "vaddsubps" "ymm2" \ + "0xcafeface, 0xcafeface" "ymm2: " + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for vaddsubps_test" +} else { + untested "couldn't run vaddsubps tests" +} +gdb_test "finish" "Run till exit from.*vaddsubps_test.*" \ + "leaving vaddsubps" + +# Preparation and testing shifting instructions. +gdb_test_no_output \ + "set \$ymm0.v2_int128 = {0, 0}" "set ymm0 for shift" +gdb_test_no_output \ + "set \$ymm1.v16_int16 = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}" \ + "set ymm1 for shift" +gdb_test_no_output "set \$xmm2.uint128 = 1" "set ymm2 for shift" +gdb_test_no_output "set \$ymm15.v2_int128 = {0,0}" "set ymm15 for shift" + +if {[record_full_function "shift"] == true} { + test_one_register "vpsrldq" "ymm15" \ + "0x80007000600050004000300, 0x0" \ + "High ymm register: " + test_one_register "vpsrldq" "ymm15" \ + "0x60005000400030002000100000000, 0xe000d000c000b000a000900000000" \ + "High xmm register: " + test_one_register "vpsrldq" "ymm0" \ + "0x800070006000500040003000200, 0x0" \ + "Low ymm register: " + test_one_register "vpsrldq" "ymm0" \ + "0x70006000500040003000200010000, 0xf000e000d000c000b000a00090000" \ + "Low xmm register: " + + test_one_register "vpslldq" "ymm15" \ + "0x7000600050004000300020001000000, 0x0" \ + "High ymm register: " + test_one_register "vpslldq" "ymm15" \ + "0x40003800300020002000180010000, 0x80007800700060006000580050004" \ + "High xmm register: " + test_one_register "vpslldq" "ymm0" \ + "0x8000700060005000400030002000100, 0x0" \ + "Low ymm register: " + test_one_register "vpslldq" "ymm0" \ + "0x40003000300020002000100010000, 0x80007000700060006000500050004" \ + "Low xmm register: " + + test_one_register "vpsrlq" "ymm15" \ + "0x4000380030000000200018001000, 0x0" \ + "from register: " + test_one_register "vpsrlq" "ymm15" \ + "0x40003000300020002000100010000, 0x0" \ + "from constant: " + test_one_register "vpsrld" "ymm15" \ + "0x100000000c0000000800000004000, 0x200010001c0010001800100014001" \ + "from register: " + test_one_register "vpsrld" "ymm15" \ + "0x40003000300020002000100010000, 0x0" \ + "from constant: " + test_one_register "vpsrlw" "ymm0" \ + "0x40003000300020002000100010000, 0x0" \ + "from register: " + test_one_register "vpsrlw" "ymm0" \ + "0x40003000300020002000100010000, 0x80007000700060006000500050004" \ + "from constant: " + + test_one_register "vpsrad" "ymm15" \ + "0x100000000c0000000800000004000, 0x200010001c0010001800100014001" \ + "from register: " + test_one_register "vpsrad" "ymm15" \ + "0x10000e000c000a0008000600040002, 0x20001e001c001a0018001600140012" \ + "from constant: " + test_one_register "vpsraw" "ymm0" \ + "0x40003000300020002000100010000, 0x0" \ + "from register: " + test_one_register "vpsraw" "ymm0" \ + "0x10000e000c000a0008000600040002, 0x20001e001c001a0018001600140012" \ + "from constant: " + + test_one_register "vpsllq" "ymm15" \ + "0x10000e000c000a00080006000400020, 0x0" \ + "from register: " + test_one_register "vpsllq" "ymm15" \ + "0x10000e000c000a0008000600040002, 0x0" \ + "from constant: " + test_one_register "vpslld" "ymm15" \ + "0x400038003000280020001800100008, 0x800078007000680060005800500048" \ + "from register: " + test_one_register "vpslld" "ymm15" "0x0, 0x0" "from constant: " + test_one_register "vpsllw" "ymm0" \ + "0x10000e000c000a0008000600040002, 0x0" \ + "from register: " + test_one_register "vpsllw" "ymm0" "0x0, 0x0" "from constant: " + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for shift_test" +} else { + untested "couldn't run shift tests" +} +gdb_test "finish" "Run till exit from.*shift_test.*" \ + "leaving shift" + +# Preparation and testing shuffling instructions. +gdb_test_no_output \ + "set \$ymm0.v2_int128 = {0, 0}" "set ymm0 for shuffle" +gdb_test_no_output \ + "set \$ymm1.v16_int16 = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}" \ + "set ymm1 for shuffle" +gdb_test_no_output "set \$ymm2.v16_int16 = {17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32}" \ + "set ymm2 for shuffle" +gdb_test_no_output "set \$ymm15.v2_int128 = {0,0}" "set ymm15 for shuffle" + +if {[record_full_function "shuffle"] == true} { + test_one_register "vshufpd" "ymm15" \ + "0x20001000200010012001100160015, 0xa0009000a0009001a0019001e001d" \ + "high register: " + test_one_register "vshufpd" "ymm0" \ + "0x20001000200010012001100140013, 0x0" \ + "low register: " + test_one_register "vshufps" "ymm15" \ + "0x180017001600150011001100120013, 0x0" \ + "high register: " + test_one_register "vshufps" "ymm0" \ + "0x180017001600150011001100120012, 0x20001f001e001d00190019001a001a" \ + "low register: " + + test_one_register "vpshuflw" "ymm15" \ + "0x150015001600150014001300120011, 0x1d001d001e001d001c001b001a0019" \ + "high register: " + test_one_register "vpshuflw" "ymm0" \ + "0x150015001500180014001300120011, 0x0" \ + "low register: " + test_one_register "vpshufhw" "ymm15" \ + "0x120011001200110012001100160015, 0x0" \ + "high register: " + test_one_register "vpshufhw" "ymm0" \ + "0x120011001200110012001100140013, 0x1a0019001a0019001a0019001c001b" \ + "low register: " + + test_one_register "vpshufd" "ymm15" \ + "0x11151100111411001113110011121100, 0x1919190019201900191f1900191e1900" \ + "high register: " + test_one_register "vpshufd" "ymm0" \ + "0x11151100111411001113110011121100, 0x0" \ + "low register: " + test_one_register "vpshufb" "ymm15" "0x0, 0x0" "high register: " + test_one_register "vpshufb" "ymm0" "0x0, 0x0" "low register: " + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for shuffle_test" +} else { + untested "couldn't run shuffle tests" +} +gdb_test "finish" "Run till exit from.*shuffle_test.*" \ + "leaving shuffle" + +# Preparation and testing permute instructions. +gdb_test_no_output \ + "set \$ymm0.v2_int128 = {0, 0}" "set ymm0 for permute" +gdb_test_no_output \ + "set \$ymm1.v16_int16 = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}" \ + "set ymm1 for permute" +gdb_test_no_output "set \$ymm2.v16_int16 = {17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32}" \ + "set ymm2 for permute" +gdb_test_no_output "set \$ymm15.v2_int128 = {0,0}" "set ymm15 for permute" + +if {[record_full_function "permute"] == true} { + test_one_register "vpermps" "ymm15" \ + "0x40003000200010004000300020001, 0x40003000200010004000300020001" + test_one_register "vpermps" "ymm0" \ + "0x140013001200110014001300120011, 0x140013001200110014001300120011" + test_one_register "vpermpd" "ymm0" \ + "0x120011001200110012001100120011, 0x0" + test_one_register "vpermpd" "ymm15" \ + "0x120011001200110012001100140013, 0x1a0019001a0019001a0019001c001b" + + test_one_register "vpermilps" "ymm0" \ + "0x180017001400130018001700140013, 0x20001f001c001b0020001f001c001b" \ + "register version" + test_one_register "vpermilps" "ymm15" \ + "0x180017001400130018001700140013, 0x0" \ + "register version" + test_one_register "vpermilps" "ymm15" \ + "0x140013001200110018001700160015, 0x1c001b001a0019001c001b001a0019" \ + "immediate version" + test_one_register "vpermilps" "ymm0" \ + "0x140013001200110014001300120011, 0x0" \ + "immediate version" + + test_one_register "vpermilpd" "ymm0" \ + "0x140013001200110014001300120011, 0x1c001b001a0019001c001b001a0019" \ + "register version" + test_one_register "vpermilpd" "ymm15" \ + "0x140013001200110014001300120011, 0x0" \ + "register version" + test_one_register "vpermilpd" "ymm15" \ + "0x140013001200110014001300120011, 0x140013001200110014001300120011" \ + "immediate version" + test_one_register "vpermilpd" "ymm0" \ + "0x40003000200010008000700060005, 0x40003000200010004000300020001" \ + "immediate version" + + test_one_register "vpermq" "ymm15" \ + "0x10000f000c000b0008000700040003, 0x10000f000c000b0008000700040003" + test_one_register "vpermq" "ymm0" \ + "0x10000f000c000b0008000700040003, 0x10000f000c000b0008000700040003" + test_one_register "vpermd" "ymm15" \ + "0x80007000600050004000300020001, 0x80007000600050004000300020001" + test_one_register "vpermd" "ymm0" \ + "0x10000f000e000d000c000b000a0009, 0x80007000600050004000300020001" + + test_one_register "vperm2i128" "ymm15" \ + "0x180017001600150014001300120011, 0x180017001600150014001300120011" + test_one_register "vperm2i128" "ymm0" \ + "0x20001f001e001d001c001b001a0019, 0x180017001600150014001300120011" + test_one_register "vperm2f128" "ymm15" "0x0, 0x0" + test_one_register "vperm2f128" "ymm0" "0x0, 0x0" + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for permute_test" +} else { + untested "couldn't run permute tests" +} +gdb_test "finish" "Run till exit from.*permute_test.*" \ + "leaving permute" + +# Preparation and testing extract_insert instructions. +gdb_test_no_output \ + "set \$ymm0.v2_int128 = {0, 0}" "set ymm0 for extract_insert" +gdb_test_no_output \ + "set \$ymm1.v16_int16 = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}" \ + "set ymm1 for extract_insert" +gdb_test_no_output "set \$xmm2.uint128 = 0xcafe" \ + "set ymm2 for extract_insert" +gdb_test_no_output "set \$ymm15.v2_int128 = {0,0}" "set ymm15 for extract_insert" +gdb_test_no_output "set \$rax = 0" "set eax for extract_insert" + +if {[record_full_function "extract_insert"] == true} { + test_one_memory "vpextrw" "global_buf1" \ + "\\\{0x1, 0x0, 0x2, 0x0, 0x3, 0x0, 0x4, 0x0 <repeats 25 times>" + test_one_general_register "vpextrw" "rax" "0x8000700060005" + + test_one_register "vpinsrq" "ymm15" \ + "0x50000cafe, 0x0" + test_one_register "vpinsrd" "ymm0" \ + "0x500cafe, 0x0" + test_one_register "vpinsrw" "ymm15" \ + "0x80007000600050004000300020001, 0x0" + test_one_register "vpinsrb" "ymm0" \ + "0x80007000600050000cafe00020001, 0x0" + + test_one_memory "vpextrq" "global_buf1" \ + "\\\{0x5, 0x0, 0x6, 0x0 <repeats 29 times>" + test_one_general_register "vpextrq" "rax" "0x80007" + test_one_memory "vpextrd" "global_buf1" \ + "\\\{0x3, 0x0 <repeats 31 times>" + test_one_general_register "vpextrd" "rax" "0x0" + test_one_memory "vpextrb" "global_buf1" \ + "\\\{0x0 <repeats 32 times>" + test_one_general_register "vpextrb" "rax" "0xcafe" + + test_one_general_register "vextractps" "eax" "0x0" + test_one_register "vinsertps" "ymm0" \ + "0x10000f000e000d000c000b000a0009, 0x0" + test_one_register "vextractf128" "ymm15" \ + "0xcafe, 0x10000f000e000d000c000b000a0009" + test_one_register "vextracti128" "ymm0" \ + "0x80007000600050004000300020001, 0xcafe" + test_one_register "vinsertf128" "ymm15" \ + "0x0, 0x0" + test_one_register "vinserti128" "ymm0" \ + "0x0, 0x0" + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for extract_insert_test" +} else { + untested "couldn't run extract_insert tests" +} +gdb_test "finish" "Run till exit from.*extract_insert_test.*" \ + "leaving extract_insert" + +# Preparation and testing blend instructions. +gdb_test_no_output \ + "set \$ymm0.v2_int128 = {0, 0}" "set ymm0 for blend" +gdb_test_no_output \ + "set \$ymm1.v16_int16 = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}" \ + "set ymm1 for blend" +gdb_test_no_output \ + "set \$ymm2.v16_int16 = {17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32}" \ + "set ymm2 for blend" +gdb_test_no_output "set \$ymm15.v2_int128 = {0,0}" "set ymm15 for blend" + +if {[record_full_function "blend"] == true} { + test_one_register "vpblendvb" "ymm0" \ + "0x180017000600050004000300120011, 0x20001f001e001d001c001b000a0009" + test_one_register "vpblendvb" "ymm15" \ + "0x80007001600150004000300020001, 0x0" + test_one_register "vpblendd" "ymm15" \ + "0x180007001600050004000300020011, 0x20000f001e000d000c000b000a0019" + test_one_register "vpblendd" "ymm0" \ + "0x180017000600150004000300020001, 0x0" + test_one_register "vpblendw" "ymm0" \ + "0x180017001600150014001300120011, 0x20001f001e001d001c001b001a0019" + test_one_register "vpblendw" "ymm15" \ + "0x180017001600150014001300120011, 0x0" + + test_one_register "vblendvpd" "ymm15" \ + "0x80007000600050014001300120011, 0x10000f000e000d001c001b001a0019" + test_one_register "vblendvps" "ymm0" \ + "0x180017000600050014001300020001, 0x0" + test_one_register "vblendpd" "ymm15" "0x0, 0x0" + test_one_register "vblendps" "ymm0" "0x0, 0x0" + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for blend_test" +} else { + untested "couldn't run blend tests" +} +gdb_test "finish" "Run till exit from.*blend_test.*" \ + "leaving blend" + +# Preparation and testing compare instructions. +gdb_test_no_output \ + "set \$xmm0.v4_float = {0, 1.5, 2, 0}" "set ymm0 for compare" +gdb_test_no_output \ + "set \$xmm1.v4_float = {0, 1, 2.5, -1}" "set ymm1 for compare" +gdb_test_no_output \ + "set \$xmm15.v4_float = {-1, -2, 10, 100}" "set ymm15 for compare" +gdb_test_no_output "set \$eflags = 2" + +if {[record_full_function "compare"] == true} { + test_one_general_register "vucomisd" "eflags" "0x203" + test_one_general_register "vucomiss" "eflags" "0x202" + test_one_general_register "vcomiss" "eflags" "0x203" + test_one_general_register "vcomisd" "eflags" "0x202" + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for compare_test" +} else { + untested "couldn't run compare tests" +} +gdb_test "finish" "Run till exit from.*compare_test.*" \ + "leaving compare" + +# Preparation and testing pack instructions. +gdb_test_no_output \ + "set \$ymm0.v2_int128 = {0, 0}" "set ymm0 for pack" +gdb_test_no_output \ + "set \$ymm1.v16_int16 = {0x1020, 0x1121, 0x1222, 0x1323, 0x1424, 0x1525, 0x1626, 0x1727, 0x1828, 0x1929, 0x1a2a, 0x1b2b, 0x1c2c, 0x1d2d, 0x1e2e, 0x1f2f}" \ + "set ymm1 for pack" +gdb_test_no_output \ + "set \$ymm2.v16_int16 = {0x3040, 0x3141, 0x3242, 0x3343, 0x3444, 0x3545, 0x3646, 0x3747, 0x3848, 0x3949, 0x3a4a, 0x3b4b, 0x3c4c, 0x3d4d, 0x3e4e, 0x3f4f}" \ + "set ymm2 for pack" +gdb_test_no_output \ + "set \$ymm15.v2_int128 = {0, 0}" "set ymm15 for pack" + +if {[record_full_function "pack"] == true} { + test_one_register "vpackusdw" "ymm0" \ + "0xffffffffffffffffffffffffffffffff, 0x0" + test_one_register "vpackusdw" "ymm15" \ + "0xffffffffffffffffffffffffffffffff, 0xffffffffffffffffffffffffffffffff" + test_one_register "vpackuswb" "ymm15" \ + "0x7fff7fff7fff7fff7fff7fff7fff7fff, 0x0" + test_one_register "vpackuswb" "ymm0" \ + "0x7fff7fff7fff7fff7fff7fff7fff7fff, 0x7fff7fff7fff7fff7fff7fff7fff7fff" + test_one_register "vpackssdw" "ymm0" \ + "0x7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f, 0x0" + test_one_register "vpackssdw" "ymm15" \ + "0x7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f, 0x7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" + test_one_register "vpacksswb" "ymm15" "0x0, 0x0" + test_one_register "vpacksswb" "ymm0" "0x0, 0x0" + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for pack_test" +} else { + untested "couldn't run pack tests" +} +gdb_test "finish" "Run till exit from.*pack_test.*" \ + "leaving pack" + +# Preparation and testing converting instructions. +gdb_test_no_output \ + "set \$ymm0.v2_int128 = {0,0}" \ + "set ymm0 for convert test" +gdb_test_no_output \ + "set \$ymm1.v8_float = {0, 1, 2.5, 10, -1, -2.5, 0}" \ + "set ymm1 for convert test" +gdb_test_no_output "set \$ymm15.v2_int128 = {0,0}" \ + "set ymm15 for convert test" +gdb_test_no_output "set \$ecx = -1" "set ecx for convert test" +gdb_test_no_output "set \$ebx = 1" "set ebx for convert test" + +if {[record_full_function "convert"] == true} { + gdb_test "maint print record-instruction" ".*" + test_one_general_register "vcvttss2si" "ecx" "0xffffffff" + test_one_general_register "vcvttsd2si" "ebx" "0x0" + test_one_register "vcvttps2dq" "ymm15" \ + "0x41200000402000003f8000004f800000, 0x0" + test_one_register "vcvttpd2dq" "ymm0" \ + "0x412000004020000041f0000000000000, 0x0" + test_one_general_register "vcvtss2si" "ebx" "0x0" + + test_one_register "vcvtss2sd" "ymm0" \ + "0x412000004020000041efffffffe00000, 0x0" + test_one_register "vcvtsi2ss" "ymm15" \ + "0x41200000402000003f80000000000000, 0x0" + test_one_register "vcvtsi2sd" "ymm0" \ + "0x8000000000000, 0x0" + test_one_register "vcvtsd2ss" "ymm15" \ + "0x490000023c000000, 0x0" + test_one_general_register "vcvtsd2si" "ebx" "0x1" + + test_one_register "vcvtpd2dq" "ymm0" \ + "0x3ff00000000000000000000000000000, 0x0" + test_one_register "vcvtpd2ps" "ymm15" \ + "0xa000000020000000100000000, 0x0" + test_one_register "vcvtps2pd" "ymm0" \ + "0x4e8240004e8040004e7e000000000000, 0x0" + test_one_register "vcvtps2dq" "ymm15" \ + "0x41cfc000000000000000000000000000, 0x0" + test_one_register "vcvtdq2pd" "ymm15" "0x0, 0x0" + test_one_register "vcvtdq2ps" "ymm0" "0x0, 0x0" + + gdb_test "record stop" "Process record is stopped.*" \ + "delete history for convert_test" +} else { + untested "couldn't run convert tests" +} +gdb_test "finish" "Run till exit from.*convert_test.*" \ + "leaving convert" diff --git a/gdb/testsuite/gdb.reverse/solib-precsave.exp b/gdb/testsuite/gdb.reverse/solib-precsave.exp index 277e33c..82b08cd 100644 --- a/gdb/testsuite/gdb.reverse/solib-precsave.exp +++ b/gdb/testsuite/gdb.reverse/solib-precsave.exp @@ -140,7 +140,7 @@ gdb_test_multiple "reverse-step" "reverse-step into solib function one" { pass $gdb_test_name } } -# Depending on wether the closing } has a line associated, we might have +# Depending on whether the closing } has a line associated, we might have # different acceptable results here gdb_test_multiple "reverse-step" "reverse-step within solib function one" { -re -wrap "return y;.*" { diff --git a/gdb/testsuite/gdb.reverse/solib-reverse.exp b/gdb/testsuite/gdb.reverse/solib-reverse.exp index 1e22e91..b2ef9b0 100644 --- a/gdb/testsuite/gdb.reverse/solib-reverse.exp +++ b/gdb/testsuite/gdb.reverse/solib-reverse.exp @@ -116,7 +116,7 @@ gdb_test_multiple "reverse-step" "reverse-step into solib function one" { pass $gdb_test_name } } -# Depending on wether the closing } has a line associated, we might have +# Depending on whether the closing } has a line associated, we might have # different acceptable results here gdb_test_multiple "reverse-step" "reverse-step within solib function one" { -re -wrap "return y;.*" { diff --git a/gdb/testsuite/gdb.rocm/code-object-load-while-breakpoint-hit.cpp b/gdb/testsuite/gdb.rocm/code-object-load-while-breakpoint-hit.cpp new file mode 100644 index 0000000..d75bc76 --- /dev/null +++ b/gdb/testsuite/gdb.rocm/code-object-load-while-breakpoint-hit.cpp @@ -0,0 +1,86 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#ifdef DEVICE + +#include <hip/hip_runtime.h> + +constexpr unsigned int NUM_BREAKPOINT_HITS = 5; + +static __device__ void +break_here () +{ +} + +extern "C" __global__ void +kernel () +{ + for (int n = 0; n < NUM_BREAKPOINT_HITS; ++n) + break_here (); +} + +#else + +#include <hip/hip_runtime.h> +#include <unistd.h> + +constexpr unsigned int NUM_ITEMS_PER_BLOCK = 256; +constexpr unsigned int NUM_BLOCKS = 128; +constexpr unsigned int NUM_ITEMS = NUM_ITEMS_PER_BLOCK * NUM_BLOCKS; +constexpr unsigned int NUM_LOAD_UNLOADS = 5; + +#define CHECK(cmd) \ + { \ + hipError_t error = cmd; \ + if (error != hipSuccess) \ + { \ + fprintf (stderr, "error: '%s'(%d) at %s:%d\n", \ + hipGetErrorString (error), error, __FILE__, __LINE__); \ + exit (EXIT_FAILURE); \ + } \ + } + +int +main (int argc, const char **argv) +{ + if (argc != 2) + { + fprintf (stderr, "Usage: %s <hip_module_path>\n", argv[0]); + return 1; + } + + const auto module_path = argv[1]; + hipModule_t module; + CHECK (hipModuleLoad (&module, module_path)); + + /* Launch the kernel. */ + hipFunction_t function; + CHECK (hipModuleGetFunction (&function, module, "kernel")); + CHECK (hipModuleLaunchKernel (function, NUM_BLOCKS, 1, 1, + NUM_ITEMS_PER_BLOCK, 1, 1, 0, nullptr, nullptr, + nullptr)); + + /* Load and unload the module many times. */ + for (int i = 0; i < NUM_LOAD_UNLOADS; ++i) + { + hipModule_t dummy_module; + CHECK (hipModuleLoad (&dummy_module, module_path)); + CHECK (hipModuleUnload (dummy_module)); + } +} + +#endif diff --git a/gdb/testsuite/gdb.rocm/code-object-load-while-breakpoint-hit.exp b/gdb/testsuite/gdb.rocm/code-object-load-while-breakpoint-hit.exp new file mode 100644 index 0000000..3fe6a95 --- /dev/null +++ b/gdb/testsuite/gdb.rocm/code-object-load-while-breakpoint-hit.exp @@ -0,0 +1,68 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This file is part of GDB. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# This test verifies what happens when a code object list update happens at the +# same time as some wave stop events are reported. It was added following a +# performance bug fix, where forward progress requirement disabled when +# pulling events from amd-dbgapi in amd_dbgapi_target_breakpoint::check_status. +# +# The test launches a kernel that hits a breakpoint with an always false +# condition a certain number of times. Meanwhile, the host loads and unloads +# a code object in a loop, causing check_status to be called. The hope is that +# check_status, when calling process_event_queue, will pull many WAVE_STOP +# events from the kernel hitting the breakpoint. +# +# Without the appropriate fix (of disabling forward progress requirement in +# check_status), GDB would hit the newly-added assert in process_event_queue, +# which verifies that forward progress requirement is disabled. Even without +# this assert, the test would likely time out (depending on the actual timeout +# value). + +load_lib rocm.exp +standard_testfile .cpp +require allow_hipcc_tests + +# Build the host executable. +if { [build_executable "failed to prepare" \ + $testfile $srcfile {debug hip}] == -1 } { + return -1 +} + +set hipmodule_path [standard_output_file ${testfile}.co] + +# Build the kernel object file. +if { [gdb_compile $srcdir/$subdir/$srcfile \ + $hipmodule_path object \ + { debug hip additional_flags=--genco additional_flags=-DDEVICE } ] != "" } { + return -1 +} + +proc do_test { } { + with_rocm_gpu_lock { + clean_restart $::binfile + gdb_test_no_output "set args $::hipmodule_path" "set args" + + if { ![runto_main] } { + return + } + + gdb_test "with breakpoint pending on -- break break_here if 0" + gdb_continue_to_end "continue to end" "continue" 1 + } +} + +do_test diff --git a/gdb/testsuite/gdb.rocm/fork-exec-gpu-to-non-gpu.exp b/gdb/testsuite/gdb.rocm/fork-exec-gpu-to-non-gpu.exp index 7588525..22d4b75 100644 --- a/gdb/testsuite/gdb.rocm/fork-exec-gpu-to-non-gpu.exp +++ b/gdb/testsuite/gdb.rocm/fork-exec-gpu-to-non-gpu.exp @@ -21,6 +21,7 @@ load_lib rocm.exp require allow_hipcc_tests +require allow_fork_tests standard_testfile -execer.cpp -execee.cpp diff --git a/gdb/testsuite/gdb.rocm/fork-exec-non-gpu-to-gpu.exp b/gdb/testsuite/gdb.rocm/fork-exec-non-gpu-to-gpu.exp index a6bcf69..1386099 100644 --- a/gdb/testsuite/gdb.rocm/fork-exec-non-gpu-to-gpu.exp +++ b/gdb/testsuite/gdb.rocm/fork-exec-non-gpu-to-gpu.exp @@ -20,6 +20,7 @@ load_lib rocm.exp require allow_hipcc_tests +require allow_fork_tests standard_testfile -execer.cpp -execee.cpp diff --git a/gdb/testsuite/gdb.rocm/precise-memory-fork.exp b/gdb/testsuite/gdb.rocm/precise-memory-fork.exp index d326c2e..23c1ebe 100644 --- a/gdb/testsuite/gdb.rocm/precise-memory-fork.exp +++ b/gdb/testsuite/gdb.rocm/precise-memory-fork.exp @@ -21,6 +21,7 @@ load_lib rocm.exp require allow_hipcc_tests +require allow_fork_tests standard_testfile .c diff --git a/gdb/testsuite/gdb.rocm/precise-memory.exp b/gdb/testsuite/gdb.rocm/precise-memory.exp index fbcb451..6711d80 100644 --- a/gdb/testsuite/gdb.rocm/precise-memory.exp +++ b/gdb/testsuite/gdb.rocm/precise-memory.exp @@ -59,7 +59,7 @@ proc do_test { } { return } - # Get to the begining of the GPU kernel without precise memory enabled. + # Get to the beginning of the GPU kernel without precise memory enabled. with_test_prefix "goto gpu code" { gdb_test_no_output "set amdgpu precise-memory off" gdb_breakpoint "kernel" allow-pending diff --git a/gdb/testsuite/gdb.server/build-id-seqno.exp b/gdb/testsuite/gdb.server/build-id-seqno.exp index a508a44..8475ccc 100644 --- a/gdb/testsuite/gdb.server/build-id-seqno.exp +++ b/gdb/testsuite/gdb.server/build-id-seqno.exp @@ -90,13 +90,13 @@ proc load_binfile_check_debug_is_found { debuginfo_file testname } { with_test_prefix "$testname" { with_timeout_factor 5 { # Probing for .build-id based debug files on remote - # targets uses the vFile:stat packet by default, though + # targets uses the vFile:lstat packet by default, though # there is a work around that avoids this which can be # used if GDB is connected to an older gdbserver without # 'stat' support. # # Check the work around works by disabling use of the - # vFile:stat packet. + # vFile:lstat packet. foreach_with_prefix stat_pkt {auto off} { clean_restart @@ -105,7 +105,7 @@ proc load_binfile_check_debug_is_found { debuginfo_file testname } { gdb_test_no_output "set sysroot target:" - gdb_test "set remote hostio-stat-packet $stat_pkt" + gdb_test "set remote hostio-lstat-packet $stat_pkt" # Make sure we're disconnected, in case we're testing with an # extended-remote board, therefore already connected. diff --git a/gdb/testsuite/gdb.server/fileio-packets.exp b/gdb/testsuite/gdb.server/fileio-packets.exp new file mode 100644 index 0000000..9435efd --- /dev/null +++ b/gdb/testsuite/gdb.server/fileio-packets.exp @@ -0,0 +1,66 @@ +# Copyright 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test some remote file I/O. The associated Python script uses the +# Python API to create and send vFile:* packets to gdbserver to +# perform actions like 'stat'. The same action is then performed +# directly from Python (e.g. a 'stat' is performed), and the results, +# from gdbserver, and from the local syscall, are compared. + +load_lib gdb-python.exp +load_lib gdbserver-support.exp + +require allow_python_tests +require allow_gdbserver_tests +require {!is_remote host} +require {!is_remote target} + +standard_testfile + +clean_restart + +# Make sure we're disconnected, in case we're testing with an +# extended-remote board, therefore already connected. +gdb_test "disconnect" ".*" + +set pyfile [gdb_remote_download host ${srcdir}/${subdir}/${testfile}.py] +gdb_test_no_output "source $pyfile" "source the script" + +# Start gdbserver, but always in extended-remote mode, and then +# connect to it from GDB. +set res [gdbserver_start "--multi --once" ""] +set gdbserver_protocol "extended-remote" +set gdbserver_gdbport [lindex $res 1] +gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport + +gdb_test_no_output "set python print-stack full" + +set test_file_1 [standard_output_file "test_file_1"] +remote_exec host "touch $test_file_1" + +set test_file_2 [standard_output_file "test_file_2"] +remote_exec host "ln -s $test_file_1 $test_file_2" + +gdb_test "python check_lstat(\"$test_file_1\")" "PASS" \ + "check remote lstat works on a normal file" + +gdb_test "python check_lstat(\"$test_file_2\")" "PASS" \ + "check remote lstat works on a symbolic link" + +gdb_test "python check_stat(\"$test_file_1\")" "PASS" \ + "check remote stat works on a normal file" + +gdb_test "python check_stat(\"$test_file_2\")" "PASS" \ + "check remote stat works on a symbolic link" diff --git a/gdb/testsuite/gdb.server/fileio-packets.py b/gdb/testsuite/gdb.server/fileio-packets.py new file mode 100644 index 0000000..f132e91 --- /dev/null +++ b/gdb/testsuite/gdb.server/fileio-packets.py @@ -0,0 +1,208 @@ +# Copyright (C) 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import os +import stat + + +# Hex encode INPUT_STRING in the same way that GDB does. Each +# character in INPUT_STRING is expanded to its two digit hex +# representation in the returned string. +# +# Only ASCII characters may appear in INPUT_STRING, this is more +# restrictive than GDB, but is good enough for testing. +def hex_encode(input_string): + byte_string = input_string.encode("ascii") + hex_string = byte_string.hex() + return hex_string + + +# Binary remote data packets can contain some escaped bytes. Decode +# the packet now. +def unescape_remote_data(buf): + escaped = False + res = bytearray() + for b in buf: + if escaped: + res.append(b ^ 0x20) + escaped = False + elif b == ord("}"): + escaped = True + else: + res.append(b) + res = bytes(res) + return res + + +# Decode the results of a remote stat like command from BUF. Returns +# None if BUF is not a valid stat result (e.g. if it indicates an +# error, or the buffer is too short). If BUF is valid then the fields +# are decoded according to the GDB remote protocol and placed into a +# dictionary, this dictionary is then returned. +def decode_stat_reply(buf, byteorder="big"): + + buf = unescape_remote_data(buf) + + if ( + buf[0] != ord("F") + or buf[1] != ord("4") + or buf[2] != ord("0") + or buf[3] != ord(";") + or len(buf) != 68 + ): + l = len(buf) + print(f"decode_stat_reply failed: {buf}\t(length = {l})") + return None + + # Discard the 'F40;' prefix. The rest is the 64 bytes of data to + # be decoded. + buf = buf[4:] + + st_dev = int.from_bytes(buf[0:4], byteorder=byteorder) + st_ino = int.from_bytes(buf[4:8], byteorder=byteorder) + st_mode = int.from_bytes(buf[8:12], byteorder=byteorder) + st_nlink = int.from_bytes(buf[12:16], byteorder=byteorder) + st_uid = int.from_bytes(buf[16:20], byteorder=byteorder) + st_gid = int.from_bytes(buf[20:24], byteorder=byteorder) + st_rdev = int.from_bytes(buf[24:28], byteorder=byteorder) + st_size = int.from_bytes(buf[28:36], byteorder=byteorder) + st_blksize = int.from_bytes(buf[36:44], byteorder=byteorder) + st_blocks = int.from_bytes(buf[44:52], byteorder=byteorder) + st_atime = int.from_bytes(buf[52:56], byteorder=byteorder) + st_mtime = int.from_bytes(buf[56:60], byteorder=byteorder) + st_ctime = int.from_bytes(buf[60:64], byteorder=byteorder) + + return { + "st_dev": st_dev, + "st_ino": st_ino, + "st_mode": st_mode, + "st_nlink": st_nlink, + "st_uid": st_uid, + "st_gid": st_gid, + "st_rdev": st_rdev, + "st_size": st_size, + "st_blksize": st_blksize, + "st_blocks": st_blocks, + "st_atime": st_atime, + "st_mtime": st_mtime, + "st_ctime": st_ctime, + } + + +# Perform an lstat of remote file FILENAME, and create a dictionary of +# the results, the keys are the fields of the stat structure. +def remote_lstat(filename): + conn = gdb.selected_inferior().connection + if not isinstance(conn, gdb.RemoteTargetConnection): + raise gdb.GdbError("connection is the wrong type") + + filename_hex = hex_encode(filename) + reply = conn.send_packet("vFile:lstat:%s" % filename_hex) + + stat = decode_stat_reply(reply) + return stat + + +# Perform a stat of remote file FILENAME, and create a dictionary of +# the results, the keys are the fields of the stat structure. +def remote_stat(filename): + conn = gdb.selected_inferior().connection + if not isinstance(conn, gdb.RemoteTargetConnection): + raise gdb.GdbError("connection is the wrong type") + + filename_hex = hex_encode(filename) + reply = conn.send_packet("vFile:stat:%s" % filename_hex) + + stat = decode_stat_reply(reply) + return stat + + +# Convert a stat_result object to a dictionary that should match the +# dictionary built from the remote protocol reply. +def stat_result_to_dict(res): + # GDB doesn't support the S_IFLNK flag for the remote protocol, so + # clear that flag in the local results. + if stat.S_ISLNK(res.st_mode): + st_mode = stat.S_IMODE(res.st_mode) + else: + st_mode = res.st_mode + + # GDB returns an integer for these fields, while Python returns a + # floating point value. Convert back to an integer to match GDB. + st_atime = int(res.st_atime) + st_mtime = int(res.st_mtime) + st_ctime = int(res.st_ctime) + + return { + "st_dev": res.st_dev, + "st_ino": res.st_ino, + "st_mode": st_mode, + "st_nlink": res.st_nlink, + "st_uid": res.st_uid, + "st_gid": res.st_gid, + "st_rdev": res.st_rdev, + "st_size": res.st_size, + "st_blksize": res.st_blksize, + "st_blocks": res.st_blocks, + "st_atime": st_atime, + "st_mtime": st_mtime, + "st_ctime": st_ctime, + } + + +# Perform an lstat of local file FILENAME, and create a dictionary of +# the results, the keys are the fields of the stat structure. +def local_lstat(filename): + res = os.lstat(filename) + return stat_result_to_dict(res) + + +# Perform an lstat of local file FILENAME, and create a dictionary of +# the results, the keys are the fields of the stat structure. +def local_stat(filename): + res = os.stat(filename) + return stat_result_to_dict(res) + + +# Perform a remote lstat using GDB, and a local lstat using os.lstat. +# Compare the results to check they are the same. +# +# For this test to work correctly, gdbserver, and GDB (where this +# Python script is running), must see the same filesystem. +def check_lstat(filename): + s1 = remote_lstat(filename) + s2 = local_lstat(filename) + + print(f"remote = {s1}") + print(f"local = {s2}") + + assert s1 == s2 + print("PASS") + + +# Perform a remote stat using GDB, and a local stat using os.stat. +# Compare the results to check they are the same. +# +# For this test to work correctly, gdbserver, and GDB (where this +# Python script is running), must see the same filesystem. +def check_stat(filename): + s1 = remote_stat(filename) + s2 = local_stat(filename) + + print(f"remote = {s1}") + print(f"local = {s2}") + + assert s1 == s2 + print("PASS") diff --git a/gdb/testsuite/gdb.server/pread-offset-size.S b/gdb/testsuite/gdb.server/pread-offset-size.S new file mode 100644 index 0000000..6ca8cf0 --- /dev/null +++ b/gdb/testsuite/gdb.server/pread-offset-size.S @@ -0,0 +1,29 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +/* Here we are trying to create a large binary (> 2 GB), + 3742415472 bytes is about 3.5 gigabytes. */ + + .text + .globl _start +_start: + .skip 3742415472 + ret + .globl f + .type f, @function +f: + ret diff --git a/gdb/testsuite/gdb.server/pread-offset-size.exp b/gdb/testsuite/gdb.server/pread-offset-size.exp new file mode 100644 index 0000000..54e67c5 --- /dev/null +++ b/gdb/testsuite/gdb.server/pread-offset-size.exp @@ -0,0 +1,49 @@ +# Copyright (C) 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +# Check that GDBserver's vFile::pread implementation is able to access +# large files (> 2GB). + +load_lib gdbserver-support.exp + +require allow_gdbserver_tests + +standard_testfile .S + +if { [prepare_for_testing ${testfile}.exp $testfile \ + $srcfile {debug additional_flags=-nostdlib} ] } { + return -1 +} + +clean_restart + +gdb_test_no_output "set remote exec-file $binfile" \ + "set remote exec-file" + +# Make sure we're disconnected, in case we're testing with an +# extended-remote board, therefore already connected. +gdb_test "disconnect" ".*" + +set res [gdbserver_spawn ""] +set gdbserver_protocol [lindex $res 0] +set gdbserver_gdbport [lindex $res 1] + +gdb_test "target $gdbserver_protocol $gdbserver_gdbport" \ + "Remote debugging using .*" \ + "target $gdbserver_protocol" + +# If loading the large binary was successful, we should be able to +# place a breakpoint on f. +gdb_test "break f" "Breakpoint 1.*" diff --git a/gdb/testsuite/gdb.stabs/weird.def b/gdb/testsuite/gdb.stabs/weird.def index 179b126..f809963 100644 --- a/gdb/testsuite/gdb.stabs/weird.def +++ b/gdb/testsuite/gdb.stabs/weird.def @@ -294,7 +294,7 @@ attr69: # Using double quotes requires an escaping, as the stabs string # is a double quote delimited string. .stabs "constString2:c=s\"Double quote String2\"", N_LSYM,0,0, 0 -# Escaping sinlge quote with is easy +# Escaping single quote with is easy .stabs "constString3:c=s'String3 with embedded quote \' in the middle'", N_LSYM,0,0, 0 # Esaping double quotes is less clear... .stabs "constString4:c=s\"String4 with embedded quote \\" in the middle\"", N_LSYM,0,0, 0 diff --git a/gdb/testsuite/gdb.testsuite/gdb_test_multiple-lbl.exp b/gdb/testsuite/gdb.testsuite/gdb_test_multiple-lbl.exp new file mode 100644 index 0000000..a05ce61 --- /dev/null +++ b/gdb/testsuite/gdb.testsuite/gdb_test_multiple-lbl.exp @@ -0,0 +1,84 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test gdb_test_multiple -lbl, particularly with patterns that share a +# common prefix. + +standard_testfile + +clean_restart + +gdb_test_no_output "source ${srcdir}/${subdir}/$testfile.gdb" \ + "source gdb test script" + +set saw_prompt 0 +set saw_prefix 0 +set saw_command 0 +set saw_prefix_foo 0 +set saw_prefix_bar 0 + +# #1 - We need anchors so that the "prefix foo" pattern below does not +# match when the expect output buffer contains: +# +# "\r\nprefix xxx\r\n\prefix foo\r\n" +# +# #2 - We need an anchor on the prompt match as otherwise the prompt +# regexp would match: +# +# "\r\nmeant-to-be-matched-by-lbl-2\r\nprefix xxx\r\n(gdb) " +# +# This test would fail if -lbl did not force the built-in prompt match +# regexp to have an anchor as well, as without it, the built-in prompt +# regexp would have the exact same issue as #2 above. + +gdb_test_multiple "command" "" -lbl { + -re "^command(?=\r\n)" { + verbose -log <COMMAND> + incr saw_command + exp_continue + } + -re "^\r\nprefix foo(?=\r\n)" { + verbose -log <PREFIX-FOO> + incr saw_prefix_foo + exp_continue + } + -re "^\r\nprefix bar(?=\r\n)" { + verbose -log <PREFIX-BAR> + incr saw_prefix_bar + exp_continue + } + -re "^\r\nprefix \[^\r\n\]*(?=\r\n)" { + verbose -log <PREFIX> + incr saw_prefix + exp_continue + } + -re "^\r\n$gdb_prompt $" { + verbose -log <PROMPT> + incr saw_prompt + pass $gdb_test_name + } +} + +verbose -log "saw_command: $saw_command" +verbose -log "saw_prefix_foo: $saw_prefix_foo" +verbose -log "saw_prefix_bar: $saw_prefix_bar" +verbose -log "saw_prefix: $saw_prefix" +verbose -log "saw_prompt: $saw_prompt" + +gdb_assert {$saw_command == 1} +gdb_assert {$saw_prefix_foo == 1} +gdb_assert {$saw_prefix_bar == 1} +gdb_assert {$saw_prefix == 3} +gdb_assert {$saw_prompt == 1} diff --git a/gdb/testsuite/gdb.testsuite/gdb_test_multiple-lbl.gdb b/gdb/testsuite/gdb.testsuite/gdb_test_multiple-lbl.gdb new file mode 100755 index 0000000..8c94dfa --- /dev/null +++ b/gdb/testsuite/gdb.testsuite/gdb_test_multiple-lbl.gdb @@ -0,0 +1,25 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +define command + echo prefix xxx\n + echo meant-to-be-matched-by-lbl-1\n + echo prefix foo\n + echo prefix bar\n + echo meant-to-be-matched-by-lbl-2\n + echo prefix xxx\n + echo prefix xxx\n + echo meant-to-be-matched-by-lbl-3\n +end diff --git a/gdb/testsuite/gdb.threads/access-mem-running-thread-exit.exp b/gdb/testsuite/gdb.threads/access-mem-running-thread-exit.exp index b41e3b2..fec31c3 100644 --- a/gdb/testsuite/gdb.threads/access-mem-running-thread-exit.exp +++ b/gdb/testsuite/gdb.threads/access-mem-running-thread-exit.exp @@ -74,42 +74,45 @@ proc test { non_stop } { delete_breakpoints # Start the second inferior. - with_test_prefix "second inferior" { - # With stub targets that do reload on run, if we let the new - # inferior share inferior 1's connection, runto would - # fail because GDB is already connected to something, like - # e.g. with --target_board=native-gdbserver: - # - # (gdb) kill - # ... - # (gdb) target remote localhost:2348 - # Already connected to a remote target. Disconnect? (y or n) - # - # Instead, start the inferior with no connection, and let - # gdb_load/runto spawn a new remote connection/gdbserver. - # - # OTOH, with extended-remote, we must let the new inferior - # reuse the current connection, so that runto below can - # issue the "run" command, and have the inferior run on the - # remote target. If we forced no connection, then "run" would - # either fail if "set auto-connect-native-target" is on, like - # the native-extended-gdbserver board enforces, or it would - # run the inferior on the native target, which isn't what is - # being tested. - # - # Since it's reload_on_run targets that need special care, we - # default to reusing the connection on most targets. - if [target_info exists gdb,do_reload_on_run] { - gdb_test "add-inferior -no-connection" "New inferior 2.*" - } else { - gdb_test "add-inferior" "New inferior 2.*" - } - gdb_test "inferior 2" "Switching to inferior 2 .*" - - gdb_load $binfile - - if ![runto setup_done] { - return -1 + if {[allow_multi_inferior_tests]} { + with_test_prefix "second inferior" { + # With stub targets that do reload on run, if we let the + # new inferior share inferior 1's connection, runto would + # fail because GDB is already connected to something, like + # e.g. with --target_board=native-gdbserver: + # + # (gdb) kill + # ... + # (gdb) target remote localhost:2348 + # Already connected to a remote target. Disconnect? (y or n) + # + # Instead, start the inferior with no connection, and let + # gdb_load/runto spawn a new remote connection/gdbserver. + # + # OTOH, with extended-remote, we must let the new inferior + # reuse the current connection, so that runto below can + # issue the "run" command, and have the inferior run on + # the remote target. If we forced no connection, then + # "run" would either fail if "set + # auto-connect-native-target" is on, like the + # native-extended-gdbserver board enforces, or it would + # run the inferior on the native target, which isn't what + # is being tested. + # + # Since it's reload_on_run targets that need special care, + # we default to reusing the connection on most targets. + if [target_info exists gdb,do_reload_on_run] { + gdb_test "add-inferior -no-connection" "New inferior 2.*" + } else { + gdb_test "add-inferior" "New inferior 2.*" + } + gdb_test "inferior 2" "Switching to inferior 2 .*" + + gdb_load $binfile + + if ![runto setup_done] { + return -1 + } } } @@ -158,13 +161,15 @@ proc test { non_stop } { verbose -log "xxxxx: iteration $iter" gdb_test -nopass "info threads" - if {$inf == 1} { - set inf 2 - } else { - set inf 1 - } + if {[allow_multi_inferior_tests]} { + if {$inf == 1} { + set inf 2 + } else { + set inf 1 + } - my_gdb_test "inferior $inf" ".*" "inferior $inf" + my_gdb_test "inferior $inf" ".*" "inferior $inf" + } my_gdb_test "print global_var = 555" " = 555" \ "write to global_var" diff --git a/gdb/testsuite/gdb.threads/current-lwp-dead.exp b/gdb/testsuite/gdb.threads/current-lwp-dead.exp index 7aa7ab9..c8364df 100644 --- a/gdb/testsuite/gdb.threads/current-lwp-dead.exp +++ b/gdb/testsuite/gdb.threads/current-lwp-dead.exp @@ -47,6 +47,6 @@ gdb_breakpoint $line gdb_continue_to_breakpoint "fn_return" ".*at-fn_return.*" # Confirm thread 2 is really gone. -gdb_test "info threads 2" "No threads match '2'\\." +gdb_test "info threads 2" "No threads matched\\." gdb_continue_to_end "" continue 1 diff --git a/gdb/testsuite/gdb.threads/detach-step-over.exp b/gdb/testsuite/gdb.threads/detach-step-over.exp index e48b83c..8a1cb29 100644 --- a/gdb/testsuite/gdb.threads/detach-step-over.exp +++ b/gdb/testsuite/gdb.threads/detach-step-over.exp @@ -50,6 +50,8 @@ require can_spawn_for_attach +require allow_multi_inferior_tests + standard_testfile set bp_lineno [gdb_get_line_number "Set breakpoint here"] diff --git a/gdb/testsuite/gdb.threads/foll-fork-other-thread.exp b/gdb/testsuite/gdb.threads/foll-fork-other-thread.exp index 5245988..8ab540c 100644 --- a/gdb/testsuite/gdb.threads/foll-fork-other-thread.exp +++ b/gdb/testsuite/gdb.threads/foll-fork-other-thread.exp @@ -17,6 +17,8 @@ # another thread, in different combinations of "set follow-fork # parent/child", and other execution modes. +require allow_fork_tests + standard_testfile # Line where to stop the main thread. diff --git a/gdb/testsuite/gdb.threads/fork-child-threads.exp b/gdb/testsuite/gdb.threads/fork-child-threads.exp index abe9769..ba9dfc2 100644 --- a/gdb/testsuite/gdb.threads/fork-child-threads.exp +++ b/gdb/testsuite/gdb.threads/fork-child-threads.exp @@ -13,10 +13,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -# Only GNU/Linux is known to support `set follow-fork-mode child'. -if { ! [istarget "*-*-linux*"] } { - return 0 -} +require allow_fork_tests standard_testfile diff --git a/gdb/testsuite/gdb.threads/fork-plus-threads.exp b/gdb/testsuite/gdb.threads/fork-plus-threads.exp index 3a5e66a..4ce88d3 100644 --- a/gdb/testsuite/gdb.threads/fork-plus-threads.exp +++ b/gdb/testsuite/gdb.threads/fork-plus-threads.exp @@ -20,6 +20,8 @@ # # See https://sourceware.org/bugzilla/show_bug.cgi?id=18600 +require allow_fork_tests + # In remote mode, we cannot continue debugging after all # inferiors have terminated, and this test requires that. if { [target_info exists gdb_protocol] diff --git a/gdb/testsuite/gdb.threads/fork-thread-pending.exp b/gdb/testsuite/gdb.threads/fork-thread-pending.exp index d0a1ca1..538e1ca 100644 --- a/gdb/testsuite/gdb.threads/fork-thread-pending.exp +++ b/gdb/testsuite/gdb.threads/fork-thread-pending.exp @@ -13,11 +13,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -# Only GNU/Linux is known to support `set follow-fork-mode child'. -# -if { ! [istarget "*-*-linux*"] } { - return 0 -} +require allow_fork_tests standard_testfile diff --git a/gdb/testsuite/gdb.threads/forking-threads-plus-breakpoint.exp b/gdb/testsuite/gdb.threads/forking-threads-plus-breakpoint.exp index 1f76898..c668a65 100644 --- a/gdb/testsuite/gdb.threads/forking-threads-plus-breakpoint.exp +++ b/gdb/testsuite/gdb.threads/forking-threads-plus-breakpoint.exp @@ -16,6 +16,8 @@ # This test verifies that several threads forking while another thread # is constantly stepping over a breakpoint is properly handled. +require allow_fork_tests + standard_testfile set linenum [gdb_get_line_number "set break here"] diff --git a/gdb/testsuite/gdb.threads/info-threads-options.c b/gdb/testsuite/gdb.threads/info-threads-options.c new file mode 100644 index 0000000..2c4cd85 --- /dev/null +++ b/gdb/testsuite/gdb.threads/info-threads-options.c @@ -0,0 +1,77 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2022-2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <pthread.h> + +#define NUM 4 + +static pthread_barrier_t threads_started_barrier; + +static void +stop_here () +{ +} + +static void +spin () +{ + while (1) + usleep (1); +} + +static void * +work (void *arg) +{ + int id = *(int *) arg; + + pthread_barrier_wait (&threads_started_barrier); + + if (id % 2 == 0) + stop_here (); + else + spin (); + + pthread_exit (NULL); +} + +int +main () +{ + /* Ensure we stop if GDB crashes and DejaGNU fails to kill us. */ + alarm (10); + + pthread_t threads[NUM]; + int ids[NUM]; + + pthread_barrier_init (&threads_started_barrier, NULL, NUM + 1); + + for (int i = 0; i < NUM; i++) + { + ids[i] = i; + pthread_create (&threads[i], NULL, work, &ids[i]); + } + + /* Wait until all threads are seen running. */ + pthread_barrier_wait (&threads_started_barrier); + + stop_here (); + + return 0; +} diff --git a/gdb/testsuite/gdb.threads/info-threads-options.exp b/gdb/testsuite/gdb.threads/info-threads-options.exp new file mode 100644 index 0000000..38e4e67 --- /dev/null +++ b/gdb/testsuite/gdb.threads/info-threads-options.exp @@ -0,0 +1,131 @@ +# Copyright (C) 2022-2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test the filter flags of the "info threads" command. + +standard_testfile + +if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" \ + executable debug] != "" } { + return -1 +} + +save_vars { GDBFLAGS } { + append GDBFLAGS " -ex \"set non-stop on\"" + clean_restart $binfile +} + +if ![runto_main] { + return -1 +} + +gdb_breakpoint "stop_here" +gdb_test_multiple "continue -a&" "" { + -re "Continuing.\r\n$gdb_prompt " { + pass $gdb_test_name + } +} + +set expected_hits 3 +set fill "\[^\r\n\]+" +set num_hits 0 +gdb_test_multiple "" "hit the breakpoint" -lbl { + -re "\r\nThread ${fill} hit Breakpoint ${decimal}," { + incr num_hits + if {$num_hits < $expected_hits} { + exp_continue + } + } +} +gdb_assert {$num_hits == $expected_hits} "expected threads hit the bp" + +# Count the number of running/stopped threads reported +# by the "info threads" command. We also capture thread ids +# for additional tests. +set running_tid "invalid" +set stopped_tid "invalid" + +set eol "(?=\r\n)" + +foreach_with_prefix flag {"" "-running" "-stopped" "-running -stopped"} { + set num_running 0 + set num_stopped 0 + gdb_test_multiple "info threads $flag" "info threads $flag" -lbl { + -re "Id${fill}Target Id${fill}Frame${fill}${eol}" { + exp_continue + } + -re "^\r\n. (${decimal})${fill}Thread ${fill}.running.${eol}" { + incr num_running + set running_tid $expect_out(1,string) + exp_continue + } + -re "^\r\n. (${decimal})${fill}Thread ${fill}stop_here ${fill}${eol}" { + incr num_stopped + set stopped_tid $expect_out(1,string) + exp_continue + } + -re "^\r\n$gdb_prompt $" { + pass $gdb_test_name + } + } + + if {$flag eq "-running"} { + gdb_assert {$num_running == 2} "num running" + gdb_assert {$num_stopped == 0} "num stopped" + } elseif {$flag eq "-stopped"} { + gdb_assert {$num_running == 0} "num running" + gdb_assert {$num_stopped == 3} "num stopped" + } else { + gdb_assert {$num_running == 2} "num running" + gdb_assert {$num_stopped == 3} "num stopped" + } +} + +verbose -log "running_tid=$running_tid, stopped_tid=$stopped_tid" + +# Test specifying thread ids. +gdb_test "info threads -running $stopped_tid" \ + "No threads matched\\." \ + "info thread -running for a stopped thread" +gdb_test "info threads -stopped $running_tid" \ + "No threads matched\\." \ + "info thread -stopped for a running thread" + +set ws "\[ \t\]+" +foreach tid "\"$running_tid\" \"$running_tid $stopped_tid\"" { + gdb_test "info threads -running $tid" \ + [multi_line \ + "${ws}Id${ws}Target Id${ws}Frame${ws}" \ + "${ws}${running_tid}${ws}Thread ${fill}.running."] \ + "info thread -running with [llength $tid] thread ids" +} + +foreach tid "\"$stopped_tid\" \"$stopped_tid $running_tid\"" { + gdb_test "info threads -stopped $tid" \ + [multi_line \ + "${ws}Id${ws}Target Id${ws}Frame${ws}" \ + "${ws}${stopped_tid}${ws}Thread ${fill} stop_here ${fill}"] \ + "info thread -stopped with [llength $tid] thread ids" +} + +gdb_test_multiple "info threads -stopped -running $stopped_tid $running_tid" \ + "filter flags and tids combined" { + -re -wrap ".*stop_here.*running.*" { + pass $gdb_test_name + } + -re -wrap ".*running.*stop_here.*" { + pass $gdb_test_name + } +} diff --git a/gdb/testsuite/gdb.threads/next-fork-exec-other-thread.exp b/gdb/testsuite/gdb.threads/next-fork-exec-other-thread.exp index bd81438..3a97127 100644 --- a/gdb/testsuite/gdb.threads/next-fork-exec-other-thread.exp +++ b/gdb/testsuite/gdb.threads/next-fork-exec-other-thread.exp @@ -25,6 +25,8 @@ # 20.04.5 LTS with 32-bit kernel + 32-bit userland. It was NOT reproducible # using a circa 2023 Raspberry Pi OS w/ 64-bit kernel and 32-bit userland. +require allow_fork_tests + standard_testfile # Line where to stop the main thread. diff --git a/gdb/testsuite/gdb.threads/next-fork-other-thread.exp b/gdb/testsuite/gdb.threads/next-fork-other-thread.exp index 183fda6..1cd6685 100644 --- a/gdb/testsuite/gdb.threads/next-fork-other-thread.exp +++ b/gdb/testsuite/gdb.threads/next-fork-other-thread.exp @@ -16,6 +16,8 @@ # Test doing a "next" on a thread during which forks or vforks happen in other # threads. +require allow_fork_tests + standard_testfile # Line where to stop the main thread. diff --git a/gdb/testsuite/gdb.threads/pending-fork-event-detach-ns.exp b/gdb/testsuite/gdb.threads/pending-fork-event-detach-ns.exp index e6e311e..29a011e 100644 --- a/gdb/testsuite/gdb.threads/pending-fork-event-detach-ns.exp +++ b/gdb/testsuite/gdb.threads/pending-fork-event-detach-ns.exp @@ -29,6 +29,8 @@ # parent thread from waitpid'ing it, preventing the main thread from joining # it, prevent it from writing the flag file, failing the test. +require allow_fork_tests + standard_testfile if { [is_remote target] } { diff --git a/gdb/testsuite/gdb.threads/pending-fork-event-detach.exp b/gdb/testsuite/gdb.threads/pending-fork-event-detach.exp index 8e77ab0..e627241 100644 --- a/gdb/testsuite/gdb.threads/pending-fork-event-detach.exp +++ b/gdb/testsuite/gdb.threads/pending-fork-event-detach.exp @@ -34,6 +34,8 @@ # event, and erroneously create a new inferior for it. Once fixed, the child # process' thread is hidden by whoever holds the pending fork event. +require allow_fork_tests + standard_testfile .c -touch-file.c set touch_file_bin $binfile-touch-file diff --git a/gdb/testsuite/gdb.threads/thread-bp-deleted.exp b/gdb/testsuite/gdb.threads/thread-bp-deleted.exp index 2eadd38..8cabb70 100644 --- a/gdb/testsuite/gdb.threads/thread-bp-deleted.exp +++ b/gdb/testsuite/gdb.threads/thread-bp-deleted.exp @@ -147,7 +147,7 @@ if {$is_remote} { exp_continue } - -re "No threads match '99'\\.\r\n$gdb_prompt $" { + -re "No threads matched\\.\r\n$gdb_prompt $" { if {!$saw_thread_exited && !$saw_bp_deleted && $attempt_count > 0} { sleep 1 incr attempt_count -1 diff --git a/gdb/testsuite/gdb.threads/thread-execl.c b/gdb/testsuite/gdb.threads/thread-execl.c index 403aa31..2d312d4 100644 --- a/gdb/testsuite/gdb.threads/thread-execl.c +++ b/gdb/testsuite/gdb.threads/thread-execl.c @@ -25,8 +25,9 @@ static const char *image; void * thread_execler (void *arg) { - /* Exec ourselves again. */ - if (execl (image, image, NULL) == -1) + /* Exec ourselves again. Pass an extra argument so that the + post-exec image knows to not re-exec yet again. */ + if (execl (image, image, "1", NULL) == -1) { perror ("execl"); abort (); @@ -40,6 +41,11 @@ main (int argc, char **argv) { pthread_t thread; + /* An extra argument means we're in the post-exec image, so we're + done. Don't re-exec again. */ + if (argc > 1) + exit (0); + image = argv[0]; pthread_create (&thread, NULL, thread_execler, NULL); diff --git a/gdb/testsuite/gdb.threads/threadapply.exp b/gdb/testsuite/gdb.threads/threadapply.exp index c53db79..9110617 100644 --- a/gdb/testsuite/gdb.threads/threadapply.exp +++ b/gdb/testsuite/gdb.threads/threadapply.exp @@ -224,6 +224,8 @@ proc kill_and_remove_inferior {thread_set} { # Test both "all" and a thread list, because those are implemented as # different commands in GDB. -foreach_with_prefix thread_set {"all" "1.1"} { - kill_and_remove_inferior $thread_set +if {[allow_multi_inferior_tests]} { + foreach_with_prefix thread_set {"all" "1.1"} { + kill_and_remove_inferior $thread_set + } } diff --git a/gdb/testsuite/gdb.threads/vfork-follow-child-exec.exp b/gdb/testsuite/gdb.threads/vfork-follow-child-exec.exp index e23db0a..0b95a75 100644 --- a/gdb/testsuite/gdb.threads/vfork-follow-child-exec.exp +++ b/gdb/testsuite/gdb.threads/vfork-follow-child-exec.exp @@ -16,6 +16,8 @@ # Test following a vfork child that execs, when the vfork parent is a # threaded program, and it's a non-main thread that vforks. +require allow_fork_tests + standard_testfile if {[build_executable "failed to prepare" $testfile $srcfile {debug pthreads}]} { diff --git a/gdb/testsuite/gdb.threads/vfork-follow-child-exit.exp b/gdb/testsuite/gdb.threads/vfork-follow-child-exit.exp index a6b7f49..ced52df 100644 --- a/gdb/testsuite/gdb.threads/vfork-follow-child-exit.exp +++ b/gdb/testsuite/gdb.threads/vfork-follow-child-exit.exp @@ -16,6 +16,8 @@ # Test following a vfork child that exits, when the vfork parent is a # threaded program, and it's a non-main thread that vforks. +require allow_fork_tests + standard_testfile if {[build_executable "failed to prepare" $testfile $srcfile {debug pthreads}]} { diff --git a/gdb/testsuite/gdb.threads/vfork-multi-inferior.exp b/gdb/testsuite/gdb.threads/vfork-multi-inferior.exp index fd081b3..1f87427 100644 --- a/gdb/testsuite/gdb.threads/vfork-multi-inferior.exp +++ b/gdb/testsuite/gdb.threads/vfork-multi-inferior.exp @@ -25,6 +25,10 @@ # To catch the bug, this test verifies that we can hit a breakpoint after a # vfork call, while a second inferior runs in the background. +require allow_fork_tests + +require allow_multi_inferior_tests + require !use_gdb_stub standard_testfile .c -sleep.c diff --git a/gdb/testsuite/gdb.threads/vfork-multi-thread.exp b/gdb/testsuite/gdb.threads/vfork-multi-thread.exp index 2b9294d..61811ae 100644 --- a/gdb/testsuite/gdb.threads/vfork-multi-thread.exp +++ b/gdb/testsuite/gdb.threads/vfork-multi-thread.exp @@ -30,6 +30,8 @@ # breakpoints are removed, so the main thread would miss the breakpoint and run # until exit. +require allow_fork_tests + standard_testfile if { [build_executable "failed to prepare" ${testfile} ${srcfile} {debug pthreads}] } { diff --git a/gdb/testsuite/gdb.threads/watchpoint-fork.exp b/gdb/testsuite/gdb.threads/watchpoint-fork.exp index 376ca2a..8e9b1c3 100644 --- a/gdb/testsuite/gdb.threads/watchpoint-fork.exp +++ b/gdb/testsuite/gdb.threads/watchpoint-fork.exp @@ -21,6 +21,8 @@ # must be done before starting the test so as to not disrupt the execution # of the actual test. +require allow_fork_tests + set allow_hw_watchpoint_tests_p [allow_hw_watchpoint_tests] set testfile watchpoint-fork diff --git a/gdb/testsuite/gdb.trace/tspeed.exp b/gdb/testsuite/gdb.trace/tspeed.exp index 25862bf..be7f37e 100644 --- a/gdb/testsuite/gdb.trace/tspeed.exp +++ b/gdb/testsuite/gdb.trace/tspeed.exp @@ -17,7 +17,7 @@ load_lib "trace-support.exp" require allow_shlib_tests -# Do not run if gdbsever debug is enabled - the output file is many Gb. +# Do not run if gdbserver debug is enabled - the output file is many Gb. if [gdbserver_debug_enabled] { return 0 } diff --git a/gdb/testsuite/gdb.tui/basic.exp b/gdb/testsuite/gdb.tui/basic.exp index 35c99bd..8ecc91a 100644 --- a/gdb/testsuite/gdb.tui/basic.exp +++ b/gdb/testsuite/gdb.tui/basic.exp @@ -112,5 +112,9 @@ set re_noattr "\[^<\]" set status_window_line 15 set status [Term::get_line_with_attrs $status_window_line] -gdb_assert { [regexp "^<reverse:1>$re_noattr*<reverse:0>$" $status] == 1} \ +verbose -log "status line: '$status'" + +# The status line uses standout, which may translate to different attributes +# depending on the terminal settings. Just check for at least one attribute. +gdb_assert { [regexp "^<.*>(exec|extended-r)" $status] == 1 } \ "status window: reverse" diff --git a/gdb/testsuite/gdb.tui/color-prompt.exp b/gdb/testsuite/gdb.tui/color-prompt.exp index a95b24a..af6e467 100644 --- a/gdb/testsuite/gdb.tui/color-prompt.exp +++ b/gdb/testsuite/gdb.tui/color-prompt.exp @@ -15,18 +15,16 @@ # Check using a prompt with color in TUI. +require allow_tui_tests + tuiterm_env Term::clean_restart 24 80 -# Set colored prompt. if {![Term::enter_tui]} { unsupported "TUI not supported" return } -Term::command "set prompt \\033\[31m(gdb) \\033\[0m" - -set line [Term::get_line_with_attrs $Term::_cur_row] -gdb_assert { [regexp "^<fg:red>$gdb_prompt <fg:default> *$" $line] } \ - "prompt with color" +set tui 1 +source $srcdir/$subdir/color-prompt.exp.tcl diff --git a/gdb/testsuite/gdb.tui/color-prompt.exp.tcl b/gdb/testsuite/gdb.tui/color-prompt.exp.tcl new file mode 100644 index 0000000..e6f4d3b --- /dev/null +++ b/gdb/testsuite/gdb.tui/color-prompt.exp.tcl @@ -0,0 +1,80 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Check using a prompt with color in TUI ($tui == 0) or CLI ($tui == 0). + +set csi [string cat {\033} "\["] +set rl_prompt_start_ignore {\001} +set rl_prompt_end_ignore {\002} + +foreach_with_prefix rl_prompt_start_end_ignore { 0 1 } { + set color_on [string cat $csi 31m] + set color_off [string cat $csi 0m] + + if { $rl_prompt_start_end_ignore } { + set color_on \ + [string cat \ + $rl_prompt_start_ignore \ + $color_on \ + $rl_prompt_end_ignore] + set color_off \ + [string cat \ + $rl_prompt_start_ignore \ + $color_off \ + $rl_prompt_end_ignore] + } + + # Set prompt with color. + set prompt "${color_on}(gdb) $color_off" + Term::command "set prompt $prompt" + + # Check the color. + set line [Term::get_line_with_attrs $Term::_cur_row] + gdb_assert { [regexp "^<fg:red>$gdb_prompt <fg:default> *$" $line] } \ + "prompt with color" + + # Type a string. + set cmd "some long command" + send_gdb $cmd + Term::wait_for_line ^[string_to_regexp "(gdb) $cmd"] 23 + + # Send ^A, aka C-a, trigger beginning-of-line. + send_gdb "\001" + if { $tui || $rl_prompt_start_end_ignore } { + Term::wait_for_line ^[string_to_regexp "(gdb) $cmd"] 6 + } else { + # Without the markers, readline may get the cursor position wrong, so + # match less strict. + Term::wait_for_line ^[string_to_regexp "(gdb) $cmd"] + } + Term::dump_screen + + # Type something else to flush out the effect of the ^A. + set prefix "A" + send_gdb $prefix + if { $tui || $rl_prompt_start_end_ignore } { + Term::wait_for_line ^[string_to_regexp "(gdb) $prefix$cmd"] 7 + } else { + # Without the markers, readline may get the cursor position wrong, so + # match less strict. + Term::wait_for_line [string_to_regexp "$prefix"] + } + + # Abort command line editing, and regenerate prompt. + send_gdb "\003" + + # Reset prompt to default prompt. + Term::command "set prompt (gdb) " +} diff --git a/gdb/testsuite/gdb.tui/esc-match.exp b/gdb/testsuite/gdb.tui/esc-match.exp new file mode 100644 index 0000000..db78ebe --- /dev/null +++ b/gdb/testsuite/gdb.tui/esc-match.exp @@ -0,0 +1,48 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test that the ANSI escape sequence matcher works +# character-by-character. + +load_lib gdb-python.exp +require allow_python_tests allow_tui_tests + +tuiterm_env + +Term::clean_restart 24 80 + +set remote_python_file [gdb_remote_download host \ + ${srcdir}/${subdir}/esc-match.py] +gdb_test_no_output "source ${remote_python_file}" \ + "source esc-match.py" + +if {![Term::enter_tui]} { + unsupported "TUI not supported" + return +} + +Term::command "python print_it()" + +Term::dump_screen + +set text [Term::get_all_lines] +# We should not see the control sequence here. +gdb_assert {![regexp -- "\\\[35;1mOUTPUT\\\[m" $text]} \ + "output visible without control sequences" + +# Also check the styling. +set text [Term::get_region 0 1 78 23 "\n" true] +gdb_assert {[regexp -- "<fg:magenta>.*OUTPUT" $text]} \ + "output is magenta" diff --git a/gdb/testsuite/gdb.tui/esc-match.py b/gdb/testsuite/gdb.tui/esc-match.py new file mode 100644 index 0000000..7816002 --- /dev/null +++ b/gdb/testsuite/gdb.tui/esc-match.py @@ -0,0 +1,26 @@ +# Copyright (C) 2025 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import sys + +# Some text to print that includes styling. +OUT = "\033[35;1mOUTPUT\033[m" + + +def print_it(): + # Print to stderr avoids any buffering, showing the bug. + for c in OUT: + print(c, end="", file=sys.stderr) + print(file=sys.stderr) diff --git a/gdb/testsuite/gdb.tui/gdb.tcl b/gdb/testsuite/gdb.tui/gdb.tcl new file mode 100755 index 0000000..ca207ed --- /dev/null +++ b/gdb/testsuite/gdb.tui/gdb.tcl @@ -0,0 +1,20 @@ +#!/usr/bin/env tclsh + +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +puts "foo\033(%5" + +gets stdin diff --git a/gdb/testsuite/gdb.tui/main-2.exp b/gdb/testsuite/gdb.tui/main-2.exp index 2b0fb6b..14a7cb1 100644 --- a/gdb/testsuite/gdb.tui/main-2.exp +++ b/gdb/testsuite/gdb.tui/main-2.exp @@ -41,7 +41,7 @@ if {![Term::enter_tui]} { set line " return 0;" set nr [gdb_get_line_number $line] -set screen_line [Term::get_line_with_attrs 6] +set screen_line [Term::get_string_with_attrs 6 11 79] verbose -log "screen line 6: '$screen_line'" -gdb_assert { [regexp "$nr <reverse:1>$line<reverse:0>" $screen_line] } \ +gdb_assert { [regexp "<reverse:1>$line<reverse:0>" $screen_line] } \ "highlighted line in middle of source window" diff --git a/gdb/testsuite/gdb.tui/main.exp b/gdb/testsuite/gdb.tui/main.exp index d6960c7..e49da35 100644 --- a/gdb/testsuite/gdb.tui/main.exp +++ b/gdb/testsuite/gdb.tui/main.exp @@ -43,7 +43,10 @@ if {![Term::enter_tui]} { } send_gdb "file [standard_output_file $testfile]\n" -gdb_assert { [Term::wait_for "Reading symbols from"] } "file command" +# Matching the output is difficult because it may or may not wrap. Simply +# match the resulting prompt. +gdb_assert { [Term::wait_for ""] } "file command" + Term::check_contents "show main after file" \ [string_to_regexp "|___[format %06d $nr]_$line"] diff --git a/gdb/testsuite/gdb.tui/new-layout.exp b/gdb/testsuite/gdb.tui/new-layout.exp index f517997..914e10c 100644 --- a/gdb/testsuite/gdb.tui/new-layout.exp +++ b/gdb/testsuite/gdb.tui/new-layout.exp @@ -150,4 +150,7 @@ Term::check_box "before cmd_only: src box in src layout" 0 0 80 15 Term::command "layout cmd_only" Term::command "layout src" + +# Flush out and check the resulting src box. +Term::command "print 1" Term::check_box "after cmd_only: src box in src layout" 0 0 80 15 diff --git a/gdb/testsuite/gdb.tui/pr30056.exp b/gdb/testsuite/gdb.tui/pr30056.exp index 1123593..dd3b25c 100644 --- a/gdb/testsuite/gdb.tui/pr30056.exp +++ b/gdb/testsuite/gdb.tui/pr30056.exp @@ -72,16 +72,15 @@ save_vars { env(LC_ALL) } { # Send ^C to clear the command line. send_gdb "\003" } else { - # Sending ^C currently doesn't abort the i-search. PR cli/30498 is - # open about this. - kfail cli/30498 $test + # Sending ^C currently doesn't abort the i-search. + fail $test - # At this point we don't have a reponsive prompt. Send ^G to abort + # At this point we don't have a responsive prompt. Send ^G to abort # the i-search. send_gdb "\007" } - # We need a reponsive prompt here, to deal with the "monitor exit" + # We need a responsive prompt here, to deal with the "monitor exit" # that native-extended-gdbserver will send. Check that we have a # responsive prompt. Term::command "echo \\n" diff --git a/gdb/testsuite/gdb.tui/source-search.c b/gdb/testsuite/gdb.tui/source-search.c new file mode 100644 index 0000000..2320c5c --- /dev/null +++ b/gdb/testsuite/gdb.tui/source-search.c @@ -0,0 +1,127 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2025 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +int +main (void) +{ + /* Line 21 */ + /* Line 22 */ + /* Line 23 */ + /* Line 24 */ + /* Line 25 */ + /* Line 26 */ + /* Line 27 */ + /* Line 28 */ + /* Line 29 */ + /* Line 30 */ + /* Line 31 */ + /* Line 32 */ + /* Line 33 */ + /* Line 34 */ + /* Line 35 */ + /* Line 36 */ + /* Line 37 */ + /* Line 38 */ + /* Line 39 */ + /* Line 40 */ + /* Line 41 */ + /* Line 42 */ + /* Line 43 */ + /* Line 44 */ + /* Line 45 */ + /* Line 46 */ + /* Line 47 */ + /* Line 48 */ + /* Line 49 */ + /* Line 50 */ + /* Line 51 */ + /* Line 52 */ + /* Line 53 */ + /* Line 54 */ + /* Line 55 */ + /* Line 56 */ + /* Line 57 */ + /* Line 58 */ + /* Line 59 */ + /* Line 60 */ + /* Line 61 */ + /* Line 62 */ + /* Line 63 */ + /* Line 64 */ + /* Line 65 */ + /* Line 66 */ + /* Line 67 */ + /* Line 68 */ + /* Line 69 */ + /* Line 70 */ + /* Line 71 */ + /* Line 72 */ + /* Line 73 */ + /* Line 74 */ + /* Line 75 */ + /* Line 76 */ + /* Line 77 */ + /* Line 78 */ + /* Line 79 */ + /* Line 80 */ + /* Line 81 */ + /* Line 82 */ + /* Line 83 */ + /* Line 84 */ + /* Line 85 */ + /* Line 86 */ + /* Line 87 */ + /* Line 88 */ + /* Line 89 */ + /* Line 90 */ + /* Line 91 */ + /* Line 92 */ + /* Line 93 */ + /* Line 94 */ + /* Line 95 */ + /* Line 96 */ + /* Line 97 */ + /* Line 98 */ + /* Line 99 */ + /* Line 100 */ + /* Line 101 */ + /* Line 102 */ + /* Line 103 */ + /* Line 104 */ + /* Line 105 */ + /* Line 106 */ + /* Line 107 */ + /* Line 108 */ + /* Line 109 */ + /* Line 110 */ + /* Line 111 */ + /* Line 112 */ + /* Line 113 */ + /* Line 114 */ + /* Line 115 */ + /* Line 116 */ + /* Line 117 */ + /* Line 118 */ + /* Line 119 */ + /* Line 120 */ + /* Line 121 */ + /* Line 122 */ + /* Line 123 */ + /* Line 124 */ + /* Line 125 */ + return 0; +} /* Last line. */ diff --git a/gdb/testsuite/gdb.tui/source-search.exp b/gdb/testsuite/gdb.tui/source-search.exp new file mode 100644 index 0000000..41bf121 --- /dev/null +++ b/gdb/testsuite/gdb.tui/source-search.exp @@ -0,0 +1,72 @@ +# Copyright 2025 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Test forward-search and reverse-search within the TUI src window. + +tuiterm_env + +standard_testfile .c + +if {[build_executable "failed to build" ${testfile} ${srcfile}] == -1} { + return +} + +Term::clean_restart 24 80 $testfile +if {![Term::enter_tui]} { + unsupported "TUI not supported" + return +} + +proc check_src_window { testname first_line } { + set last_line [expr $first_line + 12] + Term::check_box_contents $testname 0 0 80 15 \ + "^\\s+${first_line}\\s+.*\\s+${last_line}\\s+/\\* Line ${last_line} \\*/\\s+$" + +} + +# Initialise the src window so that it is displaying known contents. +# Check that the expected contents are displayed. +Term::command "list 20" +set first_line 15 +check_src_window "initial src contents" $first_line + +# Search forward. Searches are from the last line displayed, so this +# will move the next source line onto the screen each time. +for { set i 1 } { $i < 4 } { incr i } { + incr first_line + Term::command "forward-search Line" + check_src_window "src windows after forward-search $i" $first_line +} + +# Reverse search. Like forward-search, but move backward through the +# source. +for { set i 1 } { $i < 3 } { incr i } { + incr first_line -1 + Term::command "reverse-search Line" + check_src_window "src windows after reverse-search $i" $first_line +} + +# Until there are no matching lines left. +Term::command "reverse-search Line" +gdb_assert {[regexp -- "^Expression not found\\s+$" [Term::get_line 22]]} \ + "check start of source was reached" + +Term::command "forward-search Last line" +Term::check_box_contents "forward-search to end of file" 0 0 80 15 \ + "^\\s+122\\s+.*/\\* Last line\\. \\*/\\s+$" + +Term::command "reverse-search This testcase is part" +Term::check_box_contents "reverse-search to start of file" 0 0 80 15 \ + "^\\s+1\\s+.*\\s+13\\s+GNU General Public License for more details\\.\\s+$" diff --git a/gdb/testsuite/gdb.tui/tui-disasm-styling.exp b/gdb/testsuite/gdb.tui/tui-disasm-styling.exp index 513d787..43b8ecf 100644 --- a/gdb/testsuite/gdb.tui/tui-disasm-styling.exp +++ b/gdb/testsuite/gdb.tui/tui-disasm-styling.exp @@ -43,6 +43,9 @@ if {![Term::enter_tui]} { return } +# Proc enter_tui switches off styling, re-enable it. +Term::command "set style enabled on" + Term::command "layout asm" Term::check_box "asm box" 0 0 80 15 diff --git a/gdb/testsuite/gdb.tui/tui-focus.exp b/gdb/testsuite/gdb.tui/tui-focus.exp index 4c9d2a0..26e5060 100644 --- a/gdb/testsuite/gdb.tui/tui-focus.exp +++ b/gdb/testsuite/gdb.tui/tui-focus.exp @@ -73,7 +73,7 @@ foreach spec {{src true} {cmd true} {status true} {regs false} \ } } -# Use the Python TUI API to exercise some of the ambigous window name +# Use the Python TUI API to exercise some of the ambiguous window name # handling parts of the 'focus' command. Term::clean_restart 24 80 $binfile if {[allow_python_tests]} { diff --git a/gdb/testsuite/gdb.tui/tui-layout-asm-short-prog.exp b/gdb/testsuite/gdb.tui/tui-layout-asm-short-prog.exp index 51623e8..47482a2 100644 --- a/gdb/testsuite/gdb.tui/tui-layout-asm-short-prog.exp +++ b/gdb/testsuite/gdb.tui/tui-layout-asm-short-prog.exp @@ -20,9 +20,13 @@ tuiterm_env standard_testfile tui-layout-asm-short-prog.S -if {[build_executable "failed to prepare" ${testfile} ${srcfile} \ - {debug additional_flags=-nostdlib \ - additional_flags=-nostartfiles}] == -1} { +set opts {} +lappend opts debug +lappend opts additional_flags=-static +lappend opts additional_flags=-nostdlib +lappend opts additional_flags=-nostartfiles + +if { [build_executable "failed to prepare" $testfile $srcfile $opts] == -1 } { return -1 } diff --git a/gdb/testsuite/gdb.tui/tui-mode-switch.exp b/gdb/testsuite/gdb.tui/tui-mode-switch.exp new file mode 100644 index 0000000..c605962 --- /dev/null +++ b/gdb/testsuite/gdb.tui/tui-mode-switch.exp @@ -0,0 +1,57 @@ +require allow_tui_tests + +tuiterm_env + +if { [ishost *-*-*bsd*] } { + # We need support for alternate screen, and xterm doesn't have it. + set term xterm-clear +} else { + set term xterm +} + +Term::with_term $term { + Term::clean_restart 12 40 +} + +if {![Term::prepare_for_tui]} { + unsupported "TUI not supported" + return 0 +} + +# Generate prompt. +Term::gen_prompt + +# Move to last line. +for { set i 1 } { $i <= 11 } { incr i } { + send_gdb "\n" + Term::wait_for "" +} + +# Type "foo". +send_gdb "foo" +set line { 0 11 40 1 } +gdb_assert { [Term::wait_for_region_contents {*}$line "^$gdb_prompt foo"] } \ + "type foo" + +# Enter TUI. +send_gdb "\030\001" +gdb_assert { [Term::wait_for ""] } "enter TUI" + +# Exit TUI. +send_gdb "\030\001" +gdb_assert { [Term::wait_for ""] } "exit TUI" + +# Type b. +send_gdb "b" +gdb_assert { [Term::wait_for_region_contents {*}$line "^$gdb_prompt b"] } \ + "type b" + +# Check that we don't see "boo". +gdb_assert { ![Term::check_region_contents_p {*}$line "^$gdb_prompt boo"] } \ + "no boo" +Term::dump_screen + +# We need an empty prompt here, to deal with the "monitor exit" that +# native-extended-gdbserver will send. Send a backspace. +send_gdb "\010" +Term::wait_for "" diff --git a/gdb/testsuite/gdb.tui/tuiterm-2.exp b/gdb/testsuite/gdb.tui/tuiterm-2.exp index 5992271..a451834 100644 --- a/gdb/testsuite/gdb.tui/tuiterm-2.exp +++ b/gdb/testsuite/gdb.tui/tuiterm-2.exp @@ -106,6 +106,76 @@ with_override Term::accept_gdb_output test_accept_gdb_output { } gdb_assert { [Term::wait_for ""] } } + + with_test_prefix "Term::wait_for 2" { + Term::_setup 4 20 + set send_cnt 0 + set expect_send {} + set action_cnt 0 + set actions { + { + Term::_move_cursor 0 0 + + Term::_insert "${::border}(gdb) " + set pos $Term::_cur_col + + Term::_insert "foo" + + Term::_move_cursor 19 0 + Term::_insert "$::border" + + Term::_move_cursor $pos 0 + } + { + Term::_move_cursor 0 1 + + Term::_insert "${::border}(gdb) " + set pos $Term::_cur_col + + Term::_move_cursor 19 1 + Term::_insert "$::border" + + Term::_move_cursor $pos 1 + } + } + + # Wait for a prompt. + gdb_assert { [Term::wait_for ""] } + + # The first action sets the cursor after the prompt on the + # first line. The second action sets the cursor after the + # prompt on the second line. Check that wait_for returns + # after the second action, not the first. + gdb_assert { $Term::_cur_row == 1 } + } } } } + +with_test_prefix "Unrecognized escape sequence" { + spawn $srcdir/$subdir/gdb.tcl + switch_gdb_spawn_id $spawn_id + + Term::_setup 4 20 + + save_vars timeout { + set timeout 1 + + set line { 0 0 20 1 } + + # Parse "foo". + gdb_assert { [Term::wait_for_region_contents \ + {*}$line \ + [string_to_regexp "foo"]] } \ + "foo" + + # Parse "\033(%5". + gdb_assert { ![Term::accept_gdb_output 0] } \ + "fail to parse escape sequence" + gdb_assert { [Term::wait_for_region_contents \ + {*}$line \ + [string_to_regexp "^\[(%5"]] } \ + "echoed escape sequence" + } + Term::dump_screen +} diff --git a/gdb/testsuite/gdb.tui/tuiterm.exp b/gdb/testsuite/gdb.tui/tuiterm.exp index 9dc2402..ed9478a 100644 --- a/gdb/testsuite/gdb.tui/tuiterm.exp +++ b/gdb/testsuite/gdb.tui/tuiterm.exp @@ -102,7 +102,7 @@ proc test_backspace {} { Term::_move_cursor 1 2 - Term::_ctl_0x08 + Term::_ctl_0x08 0 check "backspace one" { "abcdefgh" "ijklmnop" @@ -111,13 +111,22 @@ proc test_backspace {} { } 0 2 # Cursor should not move if it is already at column 0. - Term::_ctl_0x08 + Term::_ctl_0x08 0 check "backspace 2" { "abcdefgh" "ijklmnop" "qrstuvwx" "yz01234 " } 0 2 + + # Cursor should wrap to previous line. + Term::_ctl_0x08 1 + check "backspace 3" { + "abcdefgh" + "ijklmnop" + "qrstuvwx" + "yz01234 " + } 7 1 } proc test_linefeed { } { @@ -435,6 +444,30 @@ proc test_horizontal_absolute { } { "qrstuvwx" "yz01234 " } 3 2 + + Term::_csi_G 8 + check "cursor horizontal absolute 3" { + "abcdefgh" + "ijklmnop" + "qrstuvwx" + "yz01234 " + } 7 2 + + Term::_csi_G 9 + check "cursor horizontal absolute 4" { + "abcdefgh" + "ijklmnop" + "qrstuvwx" + "yz01234 " + } 7 2 + + Term::_csi_` + check "horizontal position absolute 1" { + "abcdefgh" + "ijklmnop" + "qrstuvwx" + "yz01234 " + } 0 2 } proc test_cursor_position { } { @@ -620,13 +653,21 @@ proc test_cursor_backward_tabulation { } { } proc test_repeat { } { - Term::_move_cursor 2 1 - set Term::_last_char X + Term::_move_cursor 0 1 - Term::_csi_b 3 + Term::_insert "xxX" + gdb_assert { $Term::_last_char == "X" } + check "insert" { + "abcdefgh" + "xxXlmnop" + "qrstuvwx" + "yz01234 " + } 3 1 + + Term::_csi_b 2 check "repeat" { "abcdefgh" - "ijXXXnop" + "xxXXXnop" "qrstuvwx" "yz01234 " } 5 1 @@ -750,6 +791,15 @@ proc test_attrs {} { set line [Term::get_line_with_attrs 0] gdb_assert { [regexp $re $line] } "attribute: $attr" } + + # Regression test: Check that _csi_m works without arguments. + setup_terminal 4 1 + Term::_csi_m 7 + Term::_insert "a" + Term::_csi_m + Term::_insert "a" + set line [Term::get_line_with_attrs 0] + gdb_assert { [string equal $line "<reverse:1>a<reverse:0>a "] } } # Run proc TEST_PROC_NAME with a "small" terminal. diff --git a/gdb/testsuite/gdb.xml/bad-include.xml b/gdb/testsuite/gdb.xml/bad-include.xml index f7a2b72..cd9cce3 100644 --- a/gdb/testsuite/gdb.xml/bad-include.xml +++ b/gdb/testsuite/gdb.xml/bad-include.xml @@ -1 +1 @@ -<xi:include href="nonexistant.xml"/> +<xi:include href="nonexistent.xml"/> diff --git a/gdb/testsuite/gdb.xml/tdesc-xinclude.exp b/gdb/testsuite/gdb.xml/tdesc-xinclude.exp index 885d217..b934c80 100644 --- a/gdb/testsuite/gdb.xml/tdesc-xinclude.exp +++ b/gdb/testsuite/gdb.xml/tdesc-xinclude.exp @@ -43,7 +43,7 @@ set_arch "includes.xml" \ # This file contains a missing include. We should warn the user about # it. set_arch "bad-include.xml" \ - "warning:.*Could not load XML document \"nonexistant.xml\"$common_warn" + "warning:.*Could not load XML document \"nonexistent.xml\"$common_warn" # Make sure we detect infinite loops, eventually. set_arch "loop.xml" \ diff --git a/gdb/testsuite/lib/dwarf.exp b/gdb/testsuite/lib/dwarf.exp index b347437..3a182c2 100644 --- a/gdb/testsuite/lib/dwarf.exp +++ b/gdb/testsuite/lib/dwarf.exp @@ -1072,7 +1072,10 @@ namespace eval Dwarf { } proc _section {name {flags ""} {type ""}} { - if {$flags == "" && $type == ""} { + if {$name == ".debug_str"} { + # Hard-code this because it's always desirable. + _emit " .section $name, \"MS\", %progbits, 1" + } elseif {$flags == "" && $type == ""} { _emit " .section $name" } elseif {$type == ""} { _emit " .section $name, \"$flags\"" @@ -3398,9 +3401,24 @@ namespace eval Dwarf { # Add the strings in ARGS to the .debug_str section, and create a # .debug_str_offsets section pointing to those strings. - # BASE_OFFSET is the label for DW_AT_str_offsets_base. - proc debug_str_offsets { base_offset args } { - _section .debug_str + # Current options are: + # dwo 0|1 - boolean indicating if the sections have the dwo suffix. + # default = 0 (no .dwo suffix) + # base_offset label + # - generate label, to be used in DW_AT_str_offsets_base. + # default = "" (don't generate a label). + proc debug_str_offsets { options args } { + parse_options { + { dwo 0 } + { base_offset "" } + } + + if { $dwo } { + _section .debug_str.dwo + } else { + _section .debug_str + } + set num 0 foreach arg $args { set str_label [_compute_label "str_${num}"] @@ -3412,12 +3430,18 @@ namespace eval Dwarf { declare_labels debug_str_offsets_start debug_str_offsets_end set initial_length "$debug_str_offsets_end - $debug_str_offsets_start" - _section .debug_str_offsets + if { $dwo } { + _section .debug_str_offsets.dwo + } else { + _section .debug_str_offsets + } _op .4byte $initial_length "Initial_length" debug_str_offsets_start: _op .2byte 0x5 "version" _op .2byte 0x0 "padding" - $base_offset: + if { $base_offset != "" } { + $base_offset: + } set num 0 foreach arg $args { set str_label [_compute_label "str_${num}"] diff --git a/gdb/testsuite/lib/gdb-utils.exp b/gdb/testsuite/lib/gdb-utils.exp index fe2cfca..c24e7ed 100644 --- a/gdb/testsuite/lib/gdb-utils.exp +++ b/gdb/testsuite/lib/gdb-utils.exp @@ -70,6 +70,8 @@ proc style {str style} { set fg 39 set bg 49 set intensity 22 + set italic 23 + set underline 24 set reverse 27 switch -exact -- $style { title { set intensity 1 } @@ -84,7 +86,7 @@ proc style {str style} { line-number { set intensity 2 } none { return $str } } - return "\033\\\[${fg};${bg};${intensity};${reverse}m${str}\033\\\[m" + return "\033\\\[${fg};${bg};${intensity};${italic};${underline};${reverse}m${str}\033\\\[m" } # gdb_get_bp_addr num diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp index 2a5d37c..98691df 100644 --- a/gdb/testsuite/lib/gdb.exp +++ b/gdb/testsuite/lib/gdb.exp @@ -269,6 +269,13 @@ if ![info exists INTERNAL_GDBFLAGS] { } set INTERNAL_GDBFLAGS [append_gdb_data_directory_option $INTERNAL_GDBFLAGS] + + # Handle the case that "interactive-mode auto" reports off. + append INTERNAL_GDBFLAGS { -iex "set interactive-mode on"} + + if { [ishost "*-*-mingw*"] } { + append INTERNAL_GDBFLAGS { -iex "maint set console-translation-mode binary"} + } } # The variable gdb_prompt is a regexp which matches the gdb prompt. @@ -280,10 +287,13 @@ if {![info exists gdb_prompt]} { set gdb_prompt "\\(gdb\\)" } -# A regexp that matches the pagination prompt. -set pagination_prompt \ +# The pagination prompt. +set pagination_prompt_str \ "--Type <RET> for more, q to quit, c to continue without paging--" +# A regexp that matches the pagination prompt. +set pagination_prompt [string_to_regexp $pagination_prompt_str] + # The variable fullname_syntax_POSIX is a regexp which matches a POSIX # absolute path ie. /foo/ set fullname_syntax_POSIX {/[^\n]*/} @@ -1026,7 +1036,10 @@ proc command_to_message { command } { # should not be anchored at the end of the buffer. This means that the # pattern can match even if there is stuff output after the prompt. Does not # have any effect if -prompt is specified. -# -lbl specifies that line-by-line matching will be used. +# -lbl specifies that line-by-line matching will be used. This means +# that lines from GDB not matched by any pattern will be consumed from +# the output buffer. This helps avoid buffer overflows and timeouts +# when testing verbose commands. # EXPECT_ARGUMENTS will be fed to expect in addition to the standard # patterns. Pattern elements will be evaluated in the caller's # context; action elements will be executed in the caller's context. @@ -1124,6 +1137,7 @@ proc gdb_test_multiple { command message args } { global any_spawn_id set line_by_line 0 + set lbl_anchor_re "" set prompt_regexp "" set prompt_anchor 1 for {set i 0} {$i < [llength $args]} {incr i} { @@ -1133,6 +1147,7 @@ proc gdb_test_multiple { command message args } { set prompt_regexp [lindex $args $i] } elseif { $arg == "-lbl" } { set line_by_line 1 + set lbl_anchor_re "^" } elseif { $arg == "-no-prompt-anchor" } { set prompt_anchor 0 } else { @@ -1391,7 +1406,7 @@ proc gdb_test_multiple { command message args } { fail "$errmsg" set result -1 } - -re "\r\n$prompt_regexp" { + -re "${lbl_anchor_re}\r\n$prompt_regexp" { if {![string match "" $message]} { fail "$message" } @@ -2301,7 +2316,8 @@ proc default_gdb_exit {} { } } - if { [is_remote host] && [board_info host exists fileid] } { + if { ([is_remote host] && [board_info host exists fileid]) + || [istarget *-*-mingw*] } { send_gdb "quit\n" gdb_expect 10 { -re "y or n" { @@ -2314,7 +2330,9 @@ proc default_gdb_exit {} { } if ![is_remote host] { - remote_close host + if {[catch { remote_close host } message]} { + warning "closing gdb failed with: $message" + } } unset gdb_spawn_id unset ::gdb_tty_name @@ -2577,6 +2595,17 @@ proc default_gdb_start { } { # Output with -q, and bracketed paste mode enabled, see above. verbose "GDB initialized." } + -re "^\033\\\[6n$gdb_prompt $" { + # With MSYS2 and TERM={xterm,ansi}, I get: + # + # builtin_spawn gdb -q ... + # ^[[6n(gdb) + # + # We set TERM to dumb by default to avoid this, but some + # test-cases set TERM to xterm or ansi, in which case we get this + # output. + verbose "GDB initialized." + } -re "$gdb_prompt $" { perror "GDB never initialized." unset gdb_spawn_id @@ -5087,6 +5116,40 @@ proc skip_inline_var_tests {} { return 0 } +# Return whether we allow running fork-related testcases. Targets +# that don't even have any concept of fork will just fail to compile +# the testcases and skip the tests that way if this returns true for +# them. Unix targets that do have a fork system call, but don't +# support intercepting forks will want to return false here, otherwise +# the testcases that exercise fork may hit a number of long cascading +# time out sequences. + +proc allow_fork_tests {} { + if {[istarget "*-*-cygwin*"] || [istarget "*-*-mingw*"]} { + return 0 + } + + return 1 +} + +# Return whether we allow running testcases that want to debug +# multiple inferiors with the same target. Not all targets support +# this. Note that some tests add a second inferior but never start +# it. Those tests should not be skipped due to this proc returning +# false. + +proc allow_multi_inferior_tests {} { + if {[istarget "*-*-cygwin*"] || [istarget "*-*-mingw*"]} { + return 0 + } + + if {[use_gdb_stub]} { + return 0 + } + + return 1 +} + # Return a 1 if we should run tests that require hardware breakpoints proc allow_hw_breakpoint_tests {} { @@ -5666,6 +5729,10 @@ proc gdb_simple_compile {name code {type object} {compile_flags {}} {object obj} set ext "d" break } + if { "$flag" eq "rust" } { + set ext "rs" + break + } } set src [standard_temp_file $name.$ext] set obj [standard_temp_file $name.$postfix] @@ -6920,7 +6987,7 @@ proc kill_wait_spawned_process { proc_spawn_id } { proc spawn_id_get_pid { spawn_id } { set testpid [exp_pid -i $spawn_id] - if { [istarget "*-*-cygwin*"] } { + if { [istarget "*-*-cygwin*"] || [istarget "*-*-mingw*"] } { # testpid is the Cygwin PID, GDB uses the Windows PID, which # might be different due to the way fork/exec works. set testpid [ exec ps -e | gawk "{ if (\$1 == $testpid) print \$4; }" ] @@ -7489,6 +7556,22 @@ proc default_gdb_init { test_file_name } { setenv LC_CTYPE C setenv LANG C + # With MSYS2 and TERM={xterm,ansi}, I get: + # + # builtin_spawn gdb -q ... + # ^[[6n(gdb) + # + # While we're addressing this in default_gdb_start, this is not specific + # to gdb, other tools produce the same CSI sequence, and consequently we + # run into trouble in other places (like get_compiler_info). + # + # Set TERM to dumb to prevent the '^[[6n' from occurring. + # + # We could do this only for ishost *-*-mingw*, but that introduces + # inconsistency between platforms, with test-cases passing on one platform + # but failing on the other. So, we do this for all platforms. + setenv TERM dumb + # Don't let a .inputrc file or an existing setting of INPUTRC mess # up the test results. Certain tests (style tests and TUI tests) # want to set the terminal to a non-"dumb" value, and for those we @@ -9304,7 +9387,12 @@ proc core_find {binfile {deletefiles {}} {arg ""}} { file mkdir $coredir catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile} ${arg}; true) >/dev/null 2>&1\"" # remote_exec host "${binfile}" - foreach i "${coredir}/core ${coredir}/core.coremaker.c ${binfile}.core" { + set binfile_basename [file tail $binfile] + foreach i [list \ + ${coredir}/core \ + ${coredir}/core.coremaker.c \ + ${coredir}/${binfile_basename}.core \ + ${coredir}/${binfile_basename}.exe.core] { if [remote_file build exists $i] { remote_exec build "mv $i $destcore" set found 1 @@ -9909,6 +9997,10 @@ proc gdb_stdin_log_init { } { set logfile [standard_output_file_with_gdb_instance gdb.in] set in_file [open $logfile w] + + verbose -log "" + verbose -log "Starting logfile: $logfile" + verbose -log "" } # Write to the file for logging gdb input. @@ -10342,7 +10434,11 @@ proc with_override { name override body } { proc with_ansi_styling_terminal { body } { save_vars { ::env(TERM) ::env(NO_COLOR) ::env(COLORTERM) } { # Set environment variables to allow styling. - setenv TERM ansi + if { [ishost *-*-*bsd*] } { + setenv TERM ansiw + } else { + setenv TERM ansi + } unset -nocomplain ::env(NO_COLOR) unset -nocomplain ::env(COLORTERM) diff --git a/gdb/testsuite/lib/gdbserver-support.exp b/gdb/testsuite/lib/gdbserver-support.exp index c285072..2389206 100644 --- a/gdb/testsuite/lib/gdbserver-support.exp +++ b/gdb/testsuite/lib/gdbserver-support.exp @@ -69,7 +69,7 @@ proc gdb_target_cmd_ext { targetname serialport {additional_text ""} } { } -re "Non-stop mode requested, but remote does not support non-stop.*$gdb_prompt $" { verbose "remote does not support non-stop" - return 1 + return 2 } -re "Remote MIPS debugging.*$additional_text.*$gdb_prompt" { verbose "Set target to $targetname" diff --git a/gdb/testsuite/lib/selftest-support.exp b/gdb/testsuite/lib/selftest-support.exp index e037664..97be023 100644 --- a/gdb/testsuite/lib/selftest-support.exp +++ b/gdb/testsuite/lib/selftest-support.exp @@ -72,21 +72,39 @@ proc selftest_setup { executable function } { # run yourself set description "run until breakpoint at $function" + set re_hs {[^\r\n]+} + set re_args [string cat \ + [string_to_regexp "("] \ + $re_hs \ + [string_to_regexp ")"]] + set re_pass \ + [multi_line \ + "Starting program: $re_hs" \ + ".*" \ + [string cat "Breakpoint $::decimal, $function $re_args at" \ + " ${re_hs}gdb.c:$re_hs"] \ + ".*"] + set re_xfail \ + [multi_line \ + "Starting program: $re_hs" \ + ".*" \ + "Breakpoint $::decimal, $function $re_args$re_hs" \ + ".*"] gdb_test_multiple "run $INTERNAL_GDBFLAGS" "$description" { - -re "Starting program.*Breakpoint \[0-9\]+,.*$function \\(.*\\).* at .*main.c:.*$gdb_prompt $" { - pass "$description" - } - -re "Starting program.*Breakpoint \[0-9\]+,.*$function \\(.*\\).*$gdb_prompt $" { - xfail "$description (line numbers scrambled?)" - } - -re "vfork: No more processes.*$gdb_prompt $" { - fail "$description (out of virtual memory)" - return -1 - } - -re ".*$gdb_prompt $" { - fail "$description" - return -1 - } + -re -wrap $re_pass { + pass $description + } + -re -wrap $re_xfail { + xfail "$description (line numbers scrambled?)" + } + -re -wrap "vfork: No more processes.*" { + fail "$description (out of virtual memory)" + return -1 + } + -re -wrap "" { + fail $description + return -1 + } } return 0 diff --git a/gdb/testsuite/lib/tuiterm.exp b/gdb/testsuite/lib/tuiterm.exp index a0cd199..e1af223 100644 --- a/gdb/testsuite/lib/tuiterm.exp +++ b/gdb/testsuite/lib/tuiterm.exp @@ -33,1264 +33,1690 @@ namespace eval Term { variable _resize_count - proc _log { what } { - verbose "+++ $what" - } + variable _TERM + set _TERM "" - # Call BODY, then log WHAT along with the original and new cursor position. - proc _log_cur { what body } { - variable _cur_row - variable _cur_col + variable _alternate + variable _alternate_setup + set _alternate 0 + set _alternate_setup 0 +} + +proc Term::_log { what } { + verbose "+++ $what" +} - set orig_cur_row $_cur_row - set orig_cur_col $_cur_col +# Call BODY, then log WHAT along with the original and new cursor position. +proc Term::_log_cur { what body } { + variable _cur_row + variable _cur_col - uplevel $body + set orig_cur_row $_cur_row + set orig_cur_col $_cur_col + + set code [catch {uplevel $body} result] - _log "$what, cursor: ($orig_cur_row, $orig_cur_col) -> ($_cur_row, $_cur_col)" + _log "$what, cursor: ($orig_cur_row, $orig_cur_col) -> ($_cur_row, $_cur_col)" + + if { $code == 1 } { + global errorInfo errorCode + return -code $code -errorinfo $errorInfo -errorcode $errorCode $result + } else { + return -code $code $result } +} - # If ARG is empty, return DEF: otherwise ARG. This is useful for - # defaulting arguments in CSIs. - proc _default {arg def} { - if {$arg == ""} { - return $def - } - return $arg +# If ARG is empty, return DEF: otherwise ARG. This is useful for +# defaulting arguments in CSIs. +proc Term::_default {arg def} { + if {$arg == ""} { + return $def } + return $arg +} - # Erase in the line Y from SX to just before EX. - proc _clear_in_line {sx ex y} { - variable _attrs - variable _chars - set lattr [array get _attrs] - while {$sx < $ex} { - set _chars($sx,$y) [list " " $lattr] - incr sx - } +# Erase in the line Y from SX to just before EX. +proc Term::_clear_in_line {sx ex y} { + variable _attrs + variable _chars + set lattr [array get _attrs] + while {$sx < $ex} { + set _chars($sx,$y) [list " " $lattr] + incr sx } +} - # Erase the lines from SY to just before EY. - proc _clear_lines {sy ey} { - variable _cols - while {$sy < $ey} { - _clear_in_line 0 $_cols $sy - incr sy - } +# Erase the lines from SY to just before EY. +proc Term::_clear_lines {sy ey} { + variable _cols + while {$sy < $ey} { + _clear_in_line 0 $_cols $sy + incr sy } +} + +# Beep. +proc Term::_ctl_0x07 {} { +} + +# Return 1 if tuiterm has the bw/auto_left_margin enabled. +proc Term::_have_bw {} { + return [expr \ + [string equal $Term::_TERM "ansiw"] \ + || [string equal $Term::_TERM "ansis"]] +} - # Beep. - proc _ctl_0x07 {} { +# Backspace. +proc Term::_ctl_0x08 { {bw -1} } { + if { $bw == -1 } { + set bw [_have_bw] } + _log_cur "Backspace, bw == $bw" { + variable _cur_col + variable _cur_row + variable _cols - # Backspace. - proc _ctl_0x08 {} { - _log_cur "Backspace" { - variable _cur_col + if { $_cur_col > 0 } { + # No wrapping needed. + incr _cur_col -1 + return + } - if {$_cur_col > 0} { - incr _cur_col -1 - } + if { ! $bw } { + # Wrapping not enabled. + return } + + if { $_cur_row == 0 } { + # Can't wrap. + return + } + + # Wrap to previous line. + set _cur_col [expr $_cols - 1] + incr _cur_row -1 } +} - # Linefeed. - proc _ctl_0x0a {} { - _log_cur "Line feed" { - variable _cur_row - variable _rows - variable _cols - variable _chars - - incr _cur_row 1 - while {$_cur_row >= $_rows} { - # Scroll the display contents. We scroll one line at - # a time here; as _cur_row was only increased by one, - # a single line scroll should be enough to put the - # cursor back on the screen. But we wrap the - # scrolling inside a while loop just to be on the safe - # side. - for {set y 0} {$y < [expr $_rows - 1]} {incr y} { - set next_y [expr $y + 1] - for {set x 0} {$x < $_cols} {incr x} { - set _chars($x,$y) $_chars($x,$next_y) - } - } +# Linefeed. +proc Term::_ctl_0x0a {} { + _log_cur "Line feed" { + variable _cur_row + variable _rows + variable _cols + variable _chars - incr _cur_row -1 + incr _cur_row 1 + while {$_cur_row >= $_rows} { + # Scroll the display contents. We scroll one line at + # a time here; as _cur_row was only increased by one, + # a single line scroll should be enough to put the + # cursor back on the screen. But we wrap the + # scrolling inside a while loop just to be on the safe + # side. + for {set y 0} {$y < [expr $_rows - 1]} {incr y} { + set next_y [expr $y + 1] + for {set x 0} {$x < $_cols} {incr x} { + set _chars($x,$y) $_chars($x,$next_y) + } } + + incr _cur_row -1 } } +} - # Carriage return. - proc _ctl_0x0d {} { - _log_cur "Carriage return" { - variable _cur_col +# Carriage return. +proc Term::_ctl_0x0d {} { + _log_cur "Carriage return" { + variable _cur_col - set _cur_col 0 - } + set _cur_col 0 } +} - # Insert Character. - # - # https://vt100.net/docs/vt510-rm/ICH.html - proc _csi_@ {args} { - set n [_default [lindex $args 0] 1] +# Designate G0 Character Set, USASCII (ESC ( B) +# +# https://invisible-island.net/xterm/ctlseqs/ctlseqs.html (see "ESC ( C", case C = B) +proc Term::_esc_0x28_B {} { + _log "ignored: G0: USASCII" +} - _log_cur "Insert Character ($n)" { - variable _cur_col - variable _cur_row - variable _cols - variable _chars +# Designate G0 Character Set, DEC Special Character and Line Drawing Set (ESC ( 0) +# +# https://invisible-island.net/xterm/ctlseqs/ctlseqs.html (see "ESC ( C", case C = 0) +proc Term::_esc_0x28_0 {} { + _log "ignored: G0: DEC Special Character and Line Drawing Set" +} - # Move characters right of the cursor right by N positions, - # starting with the rightmost one. - for {set in_col [expr $_cols - $n - 1]} {$in_col >= $_cur_col} {incr in_col -1} { - set out_col [expr $in_col + $n] - set _chars($out_col,$_cur_row) $_chars($in_col,$_cur_row) - } +# DECKPAM (Application Keypad, ESC =) +# +# https://vt100.net/docs/vt510-rm/DECKPAM.html +proc Term::_esc_0x3d {} { + _log "ignored: Application Keypad" +} + +# DECKPNM (Normal Keypad, ESC >) +# +# https://vt100.net/docs/vt510-rm/DECKPNM.html +proc Term::_esc_0x3e {} { + _log "ignored: Normal Keypad" +} - # Write N blank spaces starting from the cursor. - _clear_in_line $_cur_col [expr $_cur_col + $n] $_cur_row +# Insert Character. +# +# https://vt100.net/docs/vt510-rm/ICH.html +proc Term::_csi_@ {args} { + set n [_default [lindex $args 0] 1] + + _log_cur "Insert Character ($n)" { + variable _cur_col + variable _cur_row + variable _cols + variable _chars + + # Move characters right of the cursor right by N positions, + # starting with the rightmost one. + for {set in_col [expr $_cols - $n - 1]} {$in_col >= $_cur_col} {incr in_col -1} { + set out_col [expr $in_col + $n] + set _chars($out_col,$_cur_row) $_chars($in_col,$_cur_row) } + + # Write N blank spaces starting from the cursor. + _clear_in_line $_cur_col [expr $_cur_col + $n] $_cur_row } +} - # Cursor Up. - # - # https://vt100.net/docs/vt510-rm/CUU.html - proc _csi_A {args} { - set arg [_default [lindex $args 0] 1] +# Horizontal Position Absolute. +# +# https://vt100.net/docs/vt510-rm/HPA.html +proc Term::_csi_` {args} { + # Same as Cursor Horizontal Absolute. + return [Term::_csi_G {*}$args] +} - _log_cur "Cursor Up ($arg)" { - variable _cur_row +# Cursor Up. +# +# https://vt100.net/docs/vt510-rm/CUU.html +proc Term::_csi_A {args} { + set arg [_default [lindex $args 0] 1] - set _cur_row [expr {max ($_cur_row - $arg, 0)}] - } + _log_cur "Cursor Up ($arg)" { + variable _cur_row + + set _cur_row [expr {max ($_cur_row - $arg, 0)}] } +} - # Cursor Down. - # - # https://vt100.net/docs/vt510-rm/CUD.html - proc _csi_B {args} { - set arg [_default [lindex $args 0] 1] +# Cursor Down. +# +# https://vt100.net/docs/vt510-rm/CUD.html +proc Term::_csi_B {args} { + set arg [_default [lindex $args 0] 1] - _log_cur "Cursor Down ($arg)" { - variable _cur_row - variable _rows + _log_cur "Cursor Down ($arg)" { + variable _cur_row + variable _rows - set _cur_row [expr {min ($_cur_row + $arg, $_rows - 1)}] - } + set _cur_row [expr {min ($_cur_row + $arg, $_rows - 1)}] } +} - # Cursor Forward. - # - # https://vt100.net/docs/vt510-rm/CUF.html - proc _csi_C {args} { - set arg [_default [lindex $args 0] 1] +# Cursor Forward. +# +# https://vt100.net/docs/vt510-rm/CUF.html +proc Term::_csi_C {args} { + set arg [_default [lindex $args 0] 1] - _log_cur "Cursor Forward ($arg)" { - variable _cur_col - variable _cols + _log_cur "Cursor Forward ($arg)" { + variable _cur_col + variable _cols - set _cur_col [expr {min ($_cur_col + $arg, $_cols - 1)}] - } + set _cur_col [expr {min ($_cur_col + $arg, $_cols - 1)}] } +} - # Cursor Backward. - # - # https://vt100.net/docs/vt510-rm/CUB.html - proc _csi_D {args} { - set arg [_default [lindex $args 0] 1] +# Cursor Backward. +# +# https://vt100.net/docs/vt510-rm/CUB.html +proc Term::_csi_D {args} { + set arg [_default [lindex $args 0] 1] - _log_cur "Cursor Backward ($arg)" { - variable _cur_col + _log_cur "Cursor Backward ($arg)" { + variable _cur_col - set _cur_col [expr {max ($_cur_col - $arg, 0)}] - } + set _cur_col [expr {max ($_cur_col - $arg, 0)}] } +} - # Cursor Next Line. - # - # https://vt100.net/docs/vt510-rm/CNL.html - proc _csi_E {args} { - set arg [_default [lindex $args 0] 1] +# Cursor Next Line. +# +# https://vt100.net/docs/vt510-rm/CNL.html +proc Term::_csi_E {args} { + set arg [_default [lindex $args 0] 1] - _log_cur "Cursor Next Line ($arg)" { - variable _cur_col - variable _cur_row - variable _rows + _log_cur "Cursor Next Line ($arg)" { + variable _cur_col + variable _cur_row + variable _rows - set _cur_col 0 - set _cur_row [expr {min ($_cur_row + $arg, $_rows - 1)}] - } + set _cur_col 0 + set _cur_row [expr {min ($_cur_row + $arg, $_rows - 1)}] } +} - # Cursor Previous Line. - # - # https://vt100.net/docs/vt510-rm/CPL.html - proc _csi_F {args} { - set arg [_default [lindex $args 0] 1] +# Cursor Previous Line. +# +# https://vt100.net/docs/vt510-rm/CPL.html +proc Term::_csi_F {args} { + set arg [_default [lindex $args 0] 1] - _log_cur "Cursor Previous Line ($arg)" { - variable _cur_col - variable _cur_row - variable _rows + _log_cur "Cursor Previous Line ($arg)" { + variable _cur_col + variable _cur_row + variable _rows - set _cur_col 0 - set _cur_row [expr {max ($_cur_row - $arg, 0)}] - } + set _cur_col 0 + set _cur_row [expr {max ($_cur_row - $arg, 0)}] } +} - # Cursor Horizontal Absolute. - # - # https://vt100.net/docs/vt510-rm/CHA.html - proc _csi_G {args} { - set arg [_default [lindex $args 0] 1] +# Cursor Horizontal Absolute. +# +# https://vt100.net/docs/vt510-rm/CHA.html +proc Term::_csi_G {args} { + set arg [_default [lindex $args 0] 1] - _log_cur "Cursor Horizontal Absolute ($arg)" { - variable _cur_col - variable _cols + _log_cur "Cursor Horizontal Absolute ($arg)" { + variable _cur_col + variable _cols - set _cur_col [expr {min ($arg - 1, $_cols)}] - } + set _cur_col [expr {min ($arg, $_cols)} - 1] } +} - # Cursor Position. - # - # https://vt100.net/docs/vt510-rm/CUP.html - proc _csi_H {args} { - set row [_default [lindex $args 0] 1] - set col [_default [lindex $args 1] 1] +# Cursor Position. +# +# https://vt100.net/docs/vt510-rm/CUP.html +proc Term::_csi_H {args} { + set row [_default [lindex $args 0] 1] + set col [_default [lindex $args 1] 1] - _log_cur "Cursor Position ($row, $col)" { - variable _cur_col - variable _cur_row + _log_cur "Cursor Position ($row, $col)" { + variable _cur_col + variable _cur_row - set _cur_row [expr {$row - 1}] - set _cur_col [expr {$col - 1}] - } + set _cur_row [expr {$row - 1}] + set _cur_col [expr {$col - 1}] } +} - # Cursor Horizontal Forward Tabulation. - # - # https://vt100.net/docs/vt510-rm/CHT.html - proc _csi_I {args} { - set n [_default [lindex $args 0] 1] +# Cursor Horizontal Forward Tabulation. +# +# https://vt100.net/docs/vt510-rm/CHT.html +proc Term::_csi_I {args} { + set n [_default [lindex $args 0] 1] - _log_cur "Cursor Horizontal Forward Tabulation ($n)" { - variable _cur_col - variable _cols + _log_cur "Cursor Horizontal Forward Tabulation ($n)" { + variable _cur_col + variable _cols - incr _cur_col [expr {$n * 8 - $_cur_col % 8}] - if {$_cur_col >= $_cols} { - set _cur_col [expr {$_cols - 1}] - } + incr _cur_col [expr {$n * 8 - $_cur_col % 8}] + if {$_cur_col >= $_cols} { + set _cur_col [expr {$_cols - 1}] } } +} - # Erase in Display. - # - # https://vt100.net/docs/vt510-rm/ED.html - proc _csi_J {args} { - set arg [_default [lindex $args 0] 0] - - _log_cur "Erase in Display ($arg)" { - variable _cur_col - variable _cur_row - variable _rows - variable _cols - - if {$arg == 0} { - # Cursor (inclusive) to end of display. - _clear_in_line $_cur_col $_cols $_cur_row - _clear_lines [expr {$_cur_row + 1}] $_rows - } elseif {$arg == 1} { - # Beginning of display to cursor (inclusive). - _clear_lines 0 $_cur_row - _clear_in_line 0 [expr $_cur_col + 1] $_cur_row - } elseif {$arg == 2} { - # Entire display. - _clear_lines 0 $_rows - } +# Erase in Display. +# +# https://vt100.net/docs/vt510-rm/ED.html +proc Term::_csi_J {args} { + set arg [_default [lindex $args 0] 0] + + _log_cur "Erase in Display ($arg)" { + variable _cur_col + variable _cur_row + variable _rows + variable _cols + + if {$arg == 0} { + # Cursor (inclusive) to end of display. + _clear_in_line $_cur_col $_cols $_cur_row + _clear_lines [expr {$_cur_row + 1}] $_rows + } elseif {$arg == 1} { + # Beginning of display to cursor (inclusive). + _clear_lines 0 $_cur_row + _clear_in_line 0 [expr $_cur_col + 1] $_cur_row + } elseif {$arg == 2} { + # Entire display. + _clear_lines 0 $_rows } } +} - # Erase in Line. - # - # https://vt100.net/docs/vt510-rm/EL.html - proc _csi_K {args} { - set arg [_default [lindex $args 0] 0] +# Erase in Line. +# +# https://vt100.net/docs/vt510-rm/EL.html +proc Term::_csi_K {args} { + set arg [_default [lindex $args 0] 0] - _log_cur "Erase in Line ($arg)" { - variable _cur_col - variable _cur_row - variable _cols + _log_cur "Erase in Line ($arg)" { + variable _cur_col + variable _cur_row + variable _cols - if {$arg == 0} { - # Cursor (inclusive) to end of line. - _clear_in_line $_cur_col $_cols $_cur_row - } elseif {$arg == 1} { - # Beginning of line to cursor (inclusive). - _clear_in_line 0 [expr $_cur_col + 1] $_cur_row - } elseif {$arg == 2} { - # Entire line. - _clear_in_line 0 $_cols $_cur_row - } + if {$arg == 0} { + # Cursor (inclusive) to end of line. + _clear_in_line $_cur_col $_cols $_cur_row + } elseif {$arg == 1} { + # Beginning of line to cursor (inclusive). + _clear_in_line 0 [expr $_cur_col + 1] $_cur_row + } elseif {$arg == 2} { + # Entire line. + _clear_in_line 0 $_cols $_cur_row } } +} - # Insert Line - # - # https://vt100.net/docs/vt510-rm/IL.html - proc _csi_L {args} { - set arg [_default [lindex $args 0] 1] +# Insert Line +# +# https://vt100.net/docs/vt510-rm/IL.html +proc Term::_csi_L {args} { + set arg [_default [lindex $args 0] 1] - _log_cur "Insert Line ($arg)" { - variable _cur_col - variable _cur_row - variable _rows - variable _cols - variable _chars + _log_cur "Insert Line ($arg)" { + variable _cur_col + variable _cur_row + variable _rows + variable _cols + variable _chars - set y [expr $_rows - 2] - set next_y [expr $y + $arg] - while {$y >= $_cur_row} { - for {set x 0} {$x < $_cols} {incr x} { - set _chars($x,$next_y) $_chars($x,$y) - } - incr y -1 - incr next_y -1 + set y [expr $_rows - 2] + set next_y [expr $y + $arg] + while {$y >= $_cur_row} { + for {set x 0} {$x < $_cols} {incr x} { + set _chars($x,$next_y) $_chars($x,$y) } - - _clear_lines $_cur_row [expr $_cur_row + $arg] + incr y -1 + incr next_y -1 } + + _clear_lines $_cur_row [expr $_cur_row + $arg] } +} - # Delete line. - # - # https://vt100.net/docs/vt510-rm/DL.html - proc _csi_M {args} { - set count [_default [lindex $args 0] 1] +# Delete line. +# +# https://vt100.net/docs/vt510-rm/DL.html +proc Term::_csi_M {args} { + set count [_default [lindex $args 0] 1] - _log_cur "Delete line ($count)" { - variable _cur_row - variable _rows - variable _cols - variable _chars + _log_cur "Delete line ($count)" { + variable _cur_row + variable _rows + variable _cols + variable _chars - set y $_cur_row - set next_y [expr {$y + $count}] - while {$next_y < $_rows} { - for {set x 0} {$x < $_cols} {incr x} { - set _chars($x,$y) $_chars($x,$next_y) - } - incr y - incr next_y + set y $_cur_row + set next_y [expr {$y + $count}] + while {$next_y < $_rows} { + for {set x 0} {$x < $_cols} {incr x} { + set _chars($x,$y) $_chars($x,$next_y) } - _clear_lines $y $_rows + incr y + incr next_y } + _clear_lines $y $_rows } +} - # Delete Character. - # - # https://vt100.net/docs/vt510-rm/DCH.html - proc _csi_P {args} { - set count [_default [lindex $args 0] 1] - - _log_cur "Delete character ($count)" { - variable _cur_row - variable _cur_col - variable _chars - variable _cols +# Delete Character. +# +# https://vt100.net/docs/vt510-rm/DCH.html +proc Term::_csi_P {args} { + set count [_default [lindex $args 0] 1] - # Move all characters right of the cursor N positions left. - set out_col [expr $_cur_col] - set in_col [expr $_cur_col + $count] + _log_cur "Delete character ($count)" { + variable _cur_row + variable _cur_col + variable _chars + variable _cols - while {$in_col < $_cols} { - set _chars($out_col,$_cur_row) $_chars($in_col,$_cur_row) - incr in_col - incr out_col - } + # Move all characters right of the cursor N positions left. + set out_col [expr $_cur_col] + set in_col [expr $_cur_col + $count] - # Clear the rest of the line. - _clear_in_line $out_col $_cols $_cur_row + while {$in_col < $_cols} { + set _chars($out_col,$_cur_row) $_chars($in_col,$_cur_row) + incr in_col + incr out_col } + + # Clear the rest of the line. + _clear_in_line $out_col $_cols $_cur_row } +} - # Pan Down - # - # https://vt100.net/docs/vt510-rm/SU.html - proc _csi_S {args} { - set count [_default [lindex $args 0] 1] +# Pan Down +# +# https://vt100.net/docs/vt510-rm/SU.html +proc Term::_csi_S {args} { + set count [_default [lindex $args 0] 1] - _log_cur "Pan Down ($count)" { - variable _cur_col - variable _cur_row - variable _cols - variable _rows - variable _chars + _log_cur "Pan Down ($count)" { + variable _cur_col + variable _cur_row + variable _cols + variable _rows + variable _chars - # The following code is written without consideration for - # the scroll margins. At this time this comment was - # written the tuiterm library doesn't support the scroll - # margins. If/when that changes, then the following will - # need to be updated. + # The following code is written without consideration for + # the scroll margins. At this time this comment was + # written the tuiterm library doesn't support the scroll + # margins. If/when that changes, then the following will + # need to be updated. - set dy 0 - set y $count + set dy 0 + set y $count - while {$y < $_rows} { - for {set x 0} {$x < $_cols} {incr x} { - set _chars($x,$dy) $_chars($x,$y) - } - incr y 1 - incr dy 1 + while {$y < $_rows} { + for {set x 0} {$x < $_cols} {incr x} { + set _chars($x,$dy) $_chars($x,$y) } - - _clear_lines $dy $_rows + incr y 1 + incr dy 1 } + + _clear_lines $dy $_rows } +} - # Pan Up - # - # https://vt100.net/docs/vt510-rm/SD.html - proc _csi_T {args} { - set count [_default [lindex $args 0] 1] +# Pan Up +# +# https://vt100.net/docs/vt510-rm/SD.html +proc Term::_csi_T {args} { + set count [_default [lindex $args 0] 1] - _log_cur "Pan Up ($count)" { - variable _cur_col - variable _cur_row - variable _cols - variable _rows - variable _chars + _log_cur "Pan Up ($count)" { + variable _cur_col + variable _cur_row + variable _cols + variable _rows + variable _chars - # The following code is written without consideration for - # the scroll margins. At this time this comment was - # written the tuiterm library doesn't support the scroll - # margins. If/when that changes, then the following will - # need to be updated. + # The following code is written without consideration for + # the scroll margins. At this time this comment was + # written the tuiterm library doesn't support the scroll + # margins. If/when that changes, then the following will + # need to be updated. - set y [expr $_rows - $count] - set dy $_rows + set y [expr $_rows - $count] + set dy $_rows - while {$dy >= $count} { - for {set x 0} {$x < $_cols} {incr x} { - set _chars($x,$dy) $_chars($x,$y) - } - incr y -1 - incr dy -1 + while {$dy >= $count} { + for {set x 0} {$x < $_cols} {incr x} { + set _chars($x,$dy) $_chars($x,$y) } - - _clear_lines 0 $count + incr y -1 + incr dy -1 } + + _clear_lines 0 $count } +} - # Erase chars. - # - # https://vt100.net/docs/vt510-rm/ECH.html - proc _csi_X {args} { - set n [_default [lindex $args 0] 1] +# Erase chars. +# +# https://vt100.net/docs/vt510-rm/ECH.html +proc Term::_csi_X {args} { + set n [_default [lindex $args 0] 1] - _log_cur "Erase chars ($n)" { - # Erase characters but don't move cursor. - variable _cur_col - variable _cur_row - variable _attrs - variable _chars + _log_cur "Erase chars ($n)" { + # Erase characters but don't move cursor. + variable _cur_col + variable _cur_row + variable _attrs + variable _chars - set lattr [array get _attrs] - set x $_cur_col - for {set i 0} {$i < $n} {incr i} { - set _chars($x,$_cur_row) [list " " $lattr] - incr x - } + set lattr [array get _attrs] + set x $_cur_col + for {set i 0} {$i < $n} {incr i} { + set _chars($x,$_cur_row) [list " " $lattr] + incr x } } +} - # Cursor Backward Tabulation. - # - # https://vt100.net/docs/vt510-rm/CBT.html - proc _csi_Z {args} { - set n [_default [lindex $args 0] 1] +# Cursor Backward Tabulation. +# +# https://vt100.net/docs/vt510-rm/CBT.html +proc Term::_csi_Z {args} { + set n [_default [lindex $args 0] 1] - _log_cur "Cursor Backward Tabulation ($n)" { - variable _cur_col + _log_cur "Cursor Backward Tabulation ($n)" { + variable _cur_col - set _cur_col [expr {max (int (($_cur_col - 1) / 8) * 8 - ($n - 1) * 8, 0)}] - } + set _cur_col [expr {max (int (($_cur_col - 1) / 8) * 8 - ($n - 1) * 8, 0)}] } +} - # Repeat. - # - # https://www.xfree86.org/current/ctlseqs.html (See `(REP)`) - proc _csi_b {args} { - set n [_default [lindex $args 0] 1] +# Repeat. +# +# https://www.xfree86.org/current/ctlseqs.html (See `(REP)`) +proc Term::_csi_b {args} { + set n [_default [lindex $args 0] 1] - _log_cur "Repeat ($n)" { - variable _last_char + _log_cur "Repeat ($n)" { + variable _last_char - _insert [string repeat $_last_char $n] - } + _insert [string repeat $_last_char $n] } +} - # Vertical Line Position Absolute. - # - # https://vt100.net/docs/vt510-rm/VPA.html - proc _csi_d {args} { - set row [_default [lindex $args 0] 1] +# Vertical Line Position Absolute. +# +# https://vt100.net/docs/vt510-rm/VPA.html +proc Term::_csi_d {args} { + set row [_default [lindex $args 0] 1] - _log_cur "Vertical Line Position Absolute ($row)" { - variable _cur_row - variable _rows + _log_cur "Vertical Line Position Absolute ($row)" { + variable _cur_row + variable _rows - set _cur_row [expr min ($row - 1, $_rows - 1)] - } + set _cur_row [expr min ($row - 1, $_rows - 1)] } +} - # Reset the attributes in attributes array UPVAR_NAME to the default values. - proc _reset_attrs { upvar_name } { - upvar $upvar_name var - array set var { - intensity normal - fg default - bg default - underline 0 - reverse 0 - invisible 0 - blinking 0 +# Set Mode (SM, CSI h) +# +# https://invisible-island.net/xterm/ctlseqs/ctlseqs.html +proc Term::_csi_h { args } { + foreach item $args { + switch -exact -- $item { + 4 { + # Insert Mode (IRM) + _log "ignored: insert mode" + } + default { + error unsupported + } } } +} - # Translate the color numbers as used in proc _csi_m to a name. - proc _color_attr { n } { - switch -exact -- $n { - 0 { - return black +# Reset Mode (RM, CSI l) +# +# https://invisible-island.net/xterm/ctlseqs/ctlseqs.html +proc Term::_csi_l { args } { + foreach item $args { + switch -exact -- $item { + 4 { + # Replace Mode (IRM) + _log "ignored: replace mode" + } + default { + error unsupported } + } + } +} + +# Set Scrolling Region (DECSTBM, CSI Ps ; Ps r) +# +# https://invisible-island.net/xterm/ctlseqs/ctlseqs.html +proc Term::_csi_r { top bottom } { + _log "ignored: set scrolling region" +} + +# Window manipulation (XTWINOPS, CSI Ps ; Ps ; Ps t) +# +# https://invisible-island.net/xterm/ctlseqs/ctlseqs.html +proc Term::_csi_t { arg1 arg2 arg3 } { + if { $arg1 == 22 && $arg2 == 0 && $arg3 == 0 } { + _log "ignored: Save xterm icon and window title on stack" + return + } + + if { $arg1 == 23 && $arg2 == 0 && $arg3 == 0 } { + _log "ignored: Restore xterm icon and window title from stack" + return + } + + error unsupported +} + +# DECSET (CSI ? h) +# +# https://invisible-island.net/xterm/ctlseqs/ctlseqs.html#h2-Mouse-Tracking +proc Term::_csi_0x3f_h { args } { + foreach item $args { + switch -exact -- $item { 1 { - return red + _log "ignored: Application Cursor Keys" } - 2 { - return green + 7 { + _log "ignored: autowrap mode" } - 3 { - return yellow + 1000 { + _log "ignored: Send Mouse X & Y on button press and release" } - 4 { - return blue + 1006 { + _log "ignored: Enable SGR Mouse Mode" } - 5 { - return magenta + 1049 { + _log "switch to alternate screen" + _set_alternate 1 } - 6 { - return cyan + default { + error unsupported + } + } + } +} + +# DECRST (CSI ? l) +# +# https://invisible-island.net/xterm/ctlseqs/ctlseqs.html#h2-Mouse-Tracking +proc Term::_csi_0x3f_l { args } { + foreach item $args { + switch -exact -- $item { + 1 { + _log "ignored: Normal Cursor Keys" } 7 { - return white + _log "ignored: no autowrap mode" + } + 1000 { + _log "ignored: Don't send Mouse X & Y on button press and release" + } + 1006 { + _log "ignored: Disable SGR Mouse Mode" + } + 1049 { + _log "switch from alternate screen" + _set_alternate 0 + } + default { + error "unsupported" } - default { error "unsupported color number: $n" } } } +} - # Select Graphic Rendition. - # - # https://vt100.net/docs/vt510-rm/SGR.html - proc _csi_m {args} { - _log_cur "Select Graphic Rendition ([join $args {, }])" { - variable _attrs +# Reset the attributes in attributes array UPVAR_NAME to the default values. +proc Term::_reset_attrs { upvar_name } { + upvar $upvar_name var + array set var { + intensity normal + fg default + bg default + underline 0 + reverse 0 + invisible 0 + blinking 0 + } +} - foreach item $args { - switch -exact -- $item { - "" - 0 { - _reset_attrs _attrs - } - 1 { - set _attrs(intensity) bold - } - 2 { - set _attrs(intensity) dim - } - 4 { - set _attrs(underline) 1 - } - 5 { - set _attrs(blinking) 1 - } - 7 { - set _attrs(reverse) 1 - } - 8 { - set _attrs(invisible) 1 - } - 22 { - set _attrs(intensity) normal - } - 24 { - set _attrs(underline) 0 - } - 25 { - set _attrs(blinking) 0 - } - 27 { - set _attrs(reverse) 0 - } - 28 { - set _attrs(invisible) 0 - } - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 { - set _attrs(fg) [_color_attr [expr $item - 30]] - } - 39 { - set _attrs(fg) default - } - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 { - set _attrs(bg) [_color_attr [expr $item - 40]] - } - 49 { - set _attrs(bg) default - } +# Translate the color numbers as used in proc _csi_m to a name. +proc Term::_color_attr { n } { + switch -exact -- $n { + 0 { + return black + } + 1 { + return red + } + 2 { + return green + } + 3 { + return yellow + } + 4 { + return blue + } + 5 { + return magenta + } + 6 { + return cyan + } + 7 { + return white + } + default { error "unsupported color number: $n" } + } +} + +# Select Graphic Rendition. +# +# https://vt100.net/docs/vt510-rm/SGR.html +proc Term::_csi_m {args} { + if { [llength $args] == 0 } { + # Apply default. + set args [list 0] + } + + _log_cur "Select Graphic Rendition ([join $args {, }])" { + variable _attrs + + foreach item $args { + switch -exact -- $item { + "" - 0 { + _reset_attrs _attrs + } + 1 { + set _attrs(intensity) bold + } + 2 { + set _attrs(intensity) dim + } + 4 { + set _attrs(underline) 1 + } + 5 { + set _attrs(blinking) 1 + } + 7 { + set _attrs(reverse) 1 + } + 8 { + set _attrs(invisible) 1 + } + 22 { + set _attrs(intensity) normal + } + 24 { + set _attrs(underline) 0 + } + 25 { + set _attrs(blinking) 0 + } + 27 { + set _attrs(reverse) 0 + } + 28 { + set _attrs(invisible) 0 + } + 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 { + set _attrs(fg) [_color_attr [expr $item - 30]] + } + 39 { + set _attrs(fg) default + } + 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 { + set _attrs(bg) [_color_attr [expr $item - 40]] + } + 49 { + set _attrs(bg) default } } } } +} - # Insert string at the cursor location. - proc _insert {str} { - _log_cur "Inserted string '$str'" { - _log "Inserting string '$str'" - - variable _cur_col - variable _cur_row - variable _rows - variable _cols - variable _attrs - variable _chars - set lattr [array get _attrs] - foreach char [split $str {}] { - _log_cur " Inserted char '$char'" { - set _chars($_cur_col,$_cur_row) [list $char $lattr] - incr _cur_col - if {$_cur_col >= $_cols} { - set _cur_col 0 - incr _cur_row - if {$_cur_row >= $_rows} { - error "FIXME scroll" - } +# Request Terminal Parameters (DECREQTPARM) +# +# https://invisible-island.net/xterm/ctlseqs/ctlseqs.html +# https://vt100.net/docs/vt100-ug/chapter3.html +proc Term::_csi_x {} { + # Ignore. +} + +# Insert string at the cursor location. +proc Term::_insert {str} { + _log_cur "Inserted string '$str'" { + _log "Inserting string '$str'" + + variable _cur_col + variable _cur_row + variable _rows + variable _cols + variable _attrs + variable _chars + set lattr [array get _attrs] + foreach char [split $str {}] { + _log_cur " Inserted char '$char'" { + set _chars($_cur_col,$_cur_row) [list $char $lattr] + incr _cur_col + if {$_cur_col >= $_cols} { + set _cur_col 0 + incr _cur_row + if {$_cur_row >= $_rows} { + error "FIXME scroll" } } } } + + variable _last_char + set _last_char [string index $str end] } +} - # Move the cursor to the (0-based) COL and ROW positions. - proc _move_cursor { col row } { - variable _cols - variable _rows - variable _cur_col - variable _cur_row +# Move the cursor to the (0-based) COL and ROW positions. +proc Term::_move_cursor { col row } { + variable _cols + variable _rows + variable _cur_col + variable _cur_row - if { $col < 0 || $col >= $_cols } { - error "_move_cursor: invalid col value: $col" - } + if { $col < 0 || $col >= $_cols } { + error "_move_cursor: invalid col value: $col" + } + + if { $row < 0 || $row >= $_rows } { + error "_move_cursor: invalid row value: $row" + } - if { $row < 0 || $row >= $_rows } { - error "_move_cursor: invalid row value: $row" - } + set _cur_col $col + set _cur_row $row +} - set _cur_col $col - set _cur_row $row +# Enable or disable alternate screen. +proc Term::_set_alternate { enable } { + variable _alternate + if { $enable == $_alternate } { + return } + set _alternate $enable - # Initialize. - proc _setup {rows cols} { - global stty_init - set stty_init "rows $rows columns $cols" + variable _attrs + variable _chars + variable _cur_col + variable _cur_row - variable _rows - variable _cols - variable _cur_col - variable _cur_row - variable _attrs - variable _resize_count + variable _save_attrs + variable _save_chars + variable _save_cur_col + variable _save_cur_row - set _rows $rows - set _cols $cols - set _cur_col 0 - set _cur_row 0 - set _resize_count 0 - _reset_attrs _attrs - - _clear_lines 0 $_rows - } - - # Accept some output from gdb and update the screen. - # Return 1 if successful, or 0 if a timeout occurred. - proc accept_gdb_output { } { - global expect_out - gdb_expect { - -re "^\[\x07\x08\x0a\x0d\]" { - scan $expect_out(0,string) %c val - set hexval [format "%02x" $val] - _log "wait_for: _ctl_0x${hexval}" - _ctl_0x${hexval} - } - -re "^\x1b(\[0-9a-zA-Z\])" { - _log "wait_for: unsupported escape" - error "unsupported escape" - } - -re "^\x1b\\\[(\[0-9;\]*)(\[a-zA-Z@\])" { - set cmd $expect_out(2,string) - set params [split $expect_out(1,string) ";"] - _log "wait_for: _csi_$cmd <<<$expect_out(1,string)>>>" - eval _csi_$cmd $params - } - -re "^\[^\x07\x08\x0a\x0d\x1b\]+" { - _insert $expect_out(0,string) - variable _last_char - set _last_char [string index $expect_out(0,string) end] - } + variable _alternate_setup - timeout { - # Assume a timeout means we somehow missed the - # expected result, and carry on. - warning "timeout in accept_gdb_output" - dump_screen - return 0 - } - } + if { $_alternate_setup } { + set tmp $_save_chars + } + set _save_chars [array get _chars] + if { $_alternate_setup } { + array set _chars $tmp + } - return 1 + if { $_alternate_setup } { + set tmp $_save_attrs + } + set _save_attrs [array get _attrs] + if { $_alternate_setup } { + array set _attrs $tmp } - # Print arg using "verbose -log" if DEBUG_TUI_MATCHING == 1. - proc debug_tui_matching { arg } { - set debug 0 - if { [info exists ::DEBUG_TUI_MATCHING] } { - set debug $::DEBUG_TUI_MATCHING - } + if { $_alternate_setup } { + set tmp $_save_cur_col + } + set _save_cur_col $_cur_col + if { $_alternate_setup } { + set _cur_col $tmp + } - if { ! $debug } { - return - } + if { $_alternate_setup } { + set tmp $_save_cur_row + } + set _save_cur_row $_cur_row + if { $_alternate_setup } { + set _cur_row $tmp + } - verbose -log "$arg" + if { ! $_alternate_setup } { + variable _rows + variable _cols + _setup $_rows $_cols + set _alternate_setup 1 } +} - # Accept some output from gdb and update the screen. WAIT_FOR is - # a regexp matching the line to wait for. Return 0 on timeout, 1 - # on success. - proc wait_for {wait_for} { - global gdb_prompt - variable _cur_col - variable _cur_row +# Initialize. +proc Term::_setup {rows cols} { + global stty_init + set stty_init "rows $rows columns $cols" + + variable _rows + variable _cols + variable _cur_col + variable _cur_row + variable _attrs + variable _resize_count + + set _rows $rows + set _cols $cols + set _cur_col 0 + set _cur_row 0 + set _resize_count 0 + _reset_attrs _attrs - set fn "wait_for" + _clear_lines 0 $_rows +} - set prompt_wait_for "(^|\\|)$gdb_prompt \$" - if { $wait_for == "" } { - set wait_for $prompt_wait_for +# Accept some output from gdb and update the screen. +# Return 1 if successful, or 0 if a timeout occurred. +proc Term::accept_gdb_output { {warn 1} } { + global expect_out + + set ctls "\x07\x08\x0a\x0d" + set esc "\x1b" + set re_ctls "\[$ctls\]" + set re_others "\[^$esc$ctls\]" + set have_esc 0 + gdb_expect { + -re ^$re_ctls { + scan $expect_out(0,string) %c val + set hexval [format "%02x" $val] + _log "wait_for: _ctl_0x${hexval}" + _ctl_0x${hexval} + } + -re "^$esc" { + _log "wait_for: ESC" + set have_esc 1 + } + -re "^$re_others+" { + _insert $expect_out(0,string) + } + + timeout { + # Assume a timeout means we somehow missed the + # expected result, and carry on. + warning "timeout in accept_gdb_output" + dump_screen + return 0 } + } - debug_tui_matching "$fn: regexp: '$wait_for'" + if { !$have_esc } { + return 1 + } - while 1 { - if { [accept_gdb_output] == 0 } { - return 0 - } + set re_csi [string_to_regexp "\["] + set have_csi 0 + gdb_expect { + -re "^(\[0-9a-zA-Z\])" { + _log "wait_for: unsupported escape" + error "unsupported escape" + } + -re "^(\[\\(\])(\[a-zA-Z\])" { + scan $expect_out(1,string) %c val + set hexval [format "%02x" $val] + set cmd $expect_out(2,string) + eval _esc_0x${hexval}_$cmd + } + -re "^(\[=>\])" { + scan $expect_out(1,string) %c val + set hexval [format "%02x" $val] + _esc_0x$hexval + } + -re "^$re_csi" { + _log "wait_for: CSI" + set have_csi 1 + } - # If the cursor appears just after the prompt, return. It - # isn't reliable to check this only after an insertion, - # because curses may make "unusual" redrawing decisions. - if {$wait_for == "$prompt_wait_for"} { - set prev [get_line $_cur_row $_cur_col] - } else { - set prev [get_line $_cur_row] - } - if {[regexp -- $wait_for $prev]} { - debug_tui_matching "$fn: match: '$prev'" - if {$wait_for == "$prompt_wait_for"} { - break - } - set wait_for $prompt_wait_for - debug_tui_matching "$fn: regexp prompt: '$wait_for'" - } else { - debug_tui_matching "$fn: mismatch: '$prev'" + timeout { + # Assume a timeout means we somehow missed the + # expected result, and carry on. + if { $warn } { + warning "timeout in accept_gdb_output following ESC" + dump_screen } + _insert "^\[" + return 0 } + } + if { !$have_csi } { return 1 } - # Accept some output from gdb and update the screen. Wait for the screen - # region X/Y/WIDTH/HEIGTH to matches REGEXP. Return 0 on timeout, 1 on - # success. - proc wait_for_region_contents {x y width height regexp} { - while 1 { - if { [accept_gdb_output] == 0 } { - return 0 - } - - if { [check_region_contents_p $x $y $width $height $regexp] } { - break + set re_csi_prefix {[?]} + set re_csi_args {[0-9;]} + set re_csi_cmd {[a-zA-Z@`]} + gdb_expect { + -re "^($re_csi_cmd)" { + set cmd $expect_out(1,string) + _log "wait_for: _csi_$cmd" + eval _csi_$cmd + } + -re "^($re_csi_args*)($re_csi_cmd)" { + set params [split $expect_out(1,string) ";"] + set cmd $expect_out(2,string) + _log "wait_for: _csi_$cmd <<<$params>>>" + eval _csi_$cmd $params + } + -re "^($re_csi_prefix?)($re_csi_args*)($re_csi_cmd)" { + set prefix $expect_out(1,string) + set params [split $expect_out(2,string) ";"] + set cmd $expect_out(3,string) + scan $prefix %c val + set hexval [format "%02x" $val] + _log "wait_for: _csi_0x${hexval}_$cmd <<<$expect_out(1,string)>>>" + eval _csi_0x${hexval}_$cmd $params + } + + timeout { + # Assume a timeout means we somehow missed the + # expected result, and carry on. + if { $warn } { + warning "timeout in accept_gdb_output following CSI" + dump_screen } + _insert "^\[\[" + return 0 } + } - return 1 + return 1 +} + +# Print arg using "verbose -log" if DEBUG_TUI_MATCHING == 1. +proc Term::debug_tui_matching { arg } { + set debug 0 + if { [info exists ::DEBUG_TUI_MATCHING] } { + set debug $::DEBUG_TUI_MATCHING } - # Setup the terminal with dimensions ROWSxCOLS, TERM=ansi, and execute - # BODY. - proc with_tuiterm {rows cols body} { - global env stty_init - save_vars {env(TERM) env(NO_COLOR) stty_init} { - setenv TERM ansi - setenv NO_COLOR "" - _setup $rows $cols + if { ! $debug } { + return + } - uplevel $body - } + verbose -log "$arg" +} + +# Accept some output from gdb and update the screen. WAIT_FOR is +# a regexp matching the line to wait for. Return 0 on timeout, 1 +# on success. +proc Term::wait_for {wait_for} { + global gdb_prompt + variable _cur_col + variable _cur_row + + set fn "wait_for" + + set prompt_wait_for "(^|\\|)$gdb_prompt \$" + if { $wait_for == "" } { + set wait_for $prompt_wait_for } - # Like ::clean_restart, but ensures that gdb starts in an - # environment where the TUI can work. ROWS and COLS are the size - # of the terminal. EXECUTABLE, if given, is passed to - # clean_restart. - proc clean_restart {rows cols {executable {}}} { - with_tuiterm $rows $cols { - save_vars { ::GDBFLAGS } { - # Make GDB not print the directory names. Use this setting to - # remove the differences in test runs due to varying directory - # names. - append ::GDBFLAGS " -ex \"set filename-display basename\"" + debug_tui_matching "$fn: regexp: '$wait_for'" - if {$executable == ""} { - ::clean_restart - } else { - ::clean_restart $executable - } - } + while 1 { + if { [accept_gdb_output] == 0 } { + return 0 + } - ::gdb_test_no_output "set pagination off" + # If the cursor appears just after the prompt, return. It + # isn't reliable to check this only after an insertion, + # because curses may make "unusual" redrawing decisions. + if {$wait_for == "$prompt_wait_for"} { + set prev [get_line $_cur_row $_cur_col] + } else { + set prev [get_line $_cur_row] } - } - # Generate prompt on TUIterm. - proc gen_prompt {} { - # Generate a prompt. - send_gdb "echo\n" + if { ![regexp -- $wait_for $prev] } { + debug_tui_matching "$fn: mismatch: '$prev'" + continue + } - # Drain the output before the prompt. - gdb_expect { - -re "echo\r\n" { + if {$wait_for == "$prompt_wait_for"} { + # We've detected that the cursor is just after the prompt. + # Now check that there's nothing else on the line. + set prev [get_line $_cur_row] + if { ![regexp -- "(^|\\|)$gdb_prompt +($|\\||\\+)" $prev] } { + debug_tui_matching "$fn: mismatch: '$prev'" + continue } } - # Interpret prompt using TUIterm. - wait_for "" - } + debug_tui_matching "$fn: match: '$prev'" - # Setup ready for starting the tui, but don't actually start it. - # Returns 1 on success, 0 if TUI tests should be skipped. - proc prepare_for_tui {} { - if { [is_remote host] } { - # In clean_restart, we're using "setenv TERM ansi", which has - # effect on build. If we have [is_remote host] == 0, so - # build == host, then it also has effect on host. But for - # [is_remote host] == 1, it has no effect on host. - return 0 + if {$wait_for == "$prompt_wait_for"} { + # Matched the prompt, we're done. + break } - if {![allow_tui_tests]} { + # Now try to match the prompt. + set wait_for $prompt_wait_for + debug_tui_matching "$fn: regexp prompt: '$wait_for'" + } + + return 1 +} + +# Accept some output from gdb and update the screen. Wait for the screen +# region X/Y/WIDTH/HEIGTH to matches REGEXP. Return 0 on timeout, 1 on +# success. +proc Term::wait_for_region_contents {x y width height regexp} { + while 1 { + if { [accept_gdb_output] == 0 } { return 0 } - gdb_test_no_output "set tui border-kind ascii" - gdb_test_no_output "maint set tui-resize-message on" - return 1 + if { [check_region_contents_p $x $y $width $height $regexp] } { + break + } } - # Start the TUI. Returns 1 on success, 0 if TUI tests should be - # skipped. - proc enter_tui {} { - if {![prepare_for_tui]} { + return 1 +} + +# Accept some output from gdb and update the screen. Wait for the current +# screen line to match REGEXP and cursor position POS, unless POS is empty. +# Return 0 on timeout, 1 on success. +proc Term::wait_for_line { regexp {pos ""} } { + variable _cur_row + variable _cur_col + variable _cols + + while 1 { + if { [accept_gdb_output] == 0 } { return 0 } - command_no_prompt_prefix "tui enable" - return 1 - } + if { ![check_region_contents_p 0 $_cur_row $_cols 1 $regexp] } { + continue + } - # Send the command CMD to gdb, then wait for a gdb prompt to be - # seen in the TUI. CMD should not end with a newline -- that will - # be supplied by this function. - proc command {cmd} { - global gdb_prompt - send_gdb "$cmd\n" - set str [string_to_regexp $cmd] - set str "(^|\\|)$gdb_prompt $str" - wait_for $str - } - - # As proc command, but don't wait for an initial prompt. This is used for - # initial terminal commands, where there's no prompt yet. - proc command_no_prompt_prefix {cmd} { - gen_prompt - command $cmd - } - - # Apply the attribute list in ATTRS to attributes array UPVAR_NAME. - # Return a string annotating the changed attributes. - proc apply_attrs { upvar_name attrs } { - set res "" - upvar $upvar_name var - foreach { attr val } $attrs { - if { $var($attr) != $val } { - append res "<$attr:$val>" - set var($attr) $val - } + if { $pos == "" || $_cur_col == $pos } { + break } + } - return $res + return 1 +} + +# In BODY, when using Term::with_tuiterm, use TERM instead of the default. + +proc Term::with_term { term body } { + save_vars { Term::_TERM } { + set Term::_TERM $term + uplevel $body } +} - # Return the text of screen line N. Lines are 0-based. If C is given, - # stop before column C. Columns are also zero-based. If ATTRS, annotate - # with attributes. - proc get_line_1 {n c attrs} { - variable _rows - # This can happen during resizing, if the cursor seems to - # temporarily be off-screen. - if {$n >= $_rows} { - return "" +# Setup the terminal with dimensions ROWSxCOLS, TERM=ansi, and execute +# BODY. +proc Term::with_tuiterm {rows cols body} { + global env stty_init + variable _TERM + save_vars {env(TERM) env(NO_COLOR) stty_init} { + if { $Term::_TERM != "" } { + setenv TERM $Term::_TERM + } elseif { [ishost *-*-*bsd*] } { + setenv TERM ansiw + } else { + setenv TERM ansi } + # Save active TERM variable. + set Term::_TERM $env(TERM) - set result "" - variable _cols - variable _chars - set c [_default $c $_cols] - set x 0 - if { $attrs } { - _reset_attrs line_attrs - } - while {$x < $c} { - if { $attrs } { - set char_attrs [lindex $_chars($x,$n) 1] - append result [apply_attrs line_attrs $char_attrs] + setenv NO_COLOR "" + _setup $rows $cols + + uplevel $body + } +} + +# Like ::clean_restart, but ensures that gdb starts in an +# environment where the TUI can work. ROWS and COLS are the size +# of the terminal. EXECUTABLE, if given, is passed to +# clean_restart. +proc Term::clean_restart {rows cols {executable {}}} { + with_tuiterm $rows $cols { + save_vars { ::GDBFLAGS } { + # Make GDB not print the directory names. Use this setting to + # remove the differences in test runs due to varying directory + # names. + append ::GDBFLAGS " -ex \"set filename-display basename\"" + + if {$executable == ""} { + ::clean_restart + } else { + ::clean_restart $executable } - append result [lindex $_chars($x,$n) 0] - incr x } - if { $attrs } { - _reset_attrs zero_attrs - set char_attrs [array get zero_attrs] - append result [apply_attrs line_attrs $char_attrs] + + ::gdb_test_no_output "set pagination off" + } +} + +# Generate prompt on TUIterm. +proc Term::gen_prompt {} { + # Generate a prompt. + send_gdb "echo\n" + + # Drain the output before the prompt. + gdb_expect { + -re "echo\r\n" { } - return $result } - # Return the text of screen line N, without attributes. Lines are - # 0-based. If C is given, stop before column C. Columns are also - # zero-based. - proc get_line {n {c ""} } { - return [get_line_1 $n $c 0] + # Interpret prompt using TUIterm. + wait_for "" +} + +# Setup ready for starting the tui, but don't actually start it. +# Returns 1 on success, 0 if TUI tests should be skipped. +proc Term::prepare_for_tui {} { + if { [is_remote host] } { + # In clean_restart, we're using "setenv TERM ansi", which has + # effect on build. If we have [is_remote host] == 0, so + # build == host, then it also has effect on host. But for + # [is_remote host] == 1, it has no effect on host. + return 0 } - # As get_line, but annotate with attributes. - proc get_line_with_attrs {n {c ""}} { - return [get_line_1 $n $c 1] + if {![allow_tui_tests]} { + return 0 } - # Get just the character at (X, Y). - proc get_char {x y} { - variable _chars - return [lindex $_chars($x,$y) 0] + gdb_test_no_output "set tui border-kind ascii" + gdb_test_no_output "maint set tui-resize-message on" + # When matching GDB output using Term::wait_for, the number of + # matching attempts in wait_for can be influenced by CLI styling. + # Disable it by default to avoid this. + gdb_test_no_output "set style enabled off" + return 1 +} + +# Start the TUI. Returns 1 on success, 0 if TUI tests should be +# skipped. +proc Term::enter_tui {} { + if {![prepare_for_tui]} { + return 0 } - # Get the entire screen as a string. - proc get_all_lines {} { - variable _rows - variable _cols - variable _chars + command_no_prompt_prefix "tui enable" + return 1 +} - set result "" - for {set y 0} {$y < $_rows} {incr y} { - for {set x 0} {$x < $_cols} {incr x} { - append result [lindex $_chars($x,$y) 0] - } - append result "\n" +# Send the command CMD to gdb, then wait for a gdb prompt to be +# seen in the TUI. CMD should not end with a newline -- that will +# be supplied by this function. +proc Term::command {cmd} { + global gdb_prompt + send_gdb "$cmd\n" + set str [string_to_regexp $cmd] + set str "(^|\\|)$gdb_prompt $str" + wait_for $str +} + +# As proc command, but don't wait for an initial prompt. This is used for +# initial terminal commands, where there's no prompt yet. +proc Term::command_no_prompt_prefix {cmd} { + gen_prompt + command $cmd +} + +# Apply the attribute list in ATTRS to attributes array UPVAR_NAME. +# Return a string annotating the changed attributes. +proc Term::apply_attrs { upvar_name attrs } { + set res "" + upvar $upvar_name var + foreach { attr val } $attrs { + if { $var($attr) != $val } { + append res "<$attr:$val>" + set var($attr) $val } + } - return $result + return $res +} + +# Return the text of screen line N. Lines are 0-based. Start at column +# X. If C is non-empty, stop before column C. Columns are also +# zero-based. If ATTRS, annotate with attributes. +proc Term::get_string {n x c {attrs 0}} { + variable _rows + # This can happen during resizing, if the cursor seems to + # temporarily be off-screen. + if {$n >= $_rows} { + return "" } - # Get the text just before the cursor. - proc get_current_line {} { - variable _cur_col - variable _cur_row - return [get_line $_cur_row $_cur_col] + set result "" + variable _cols + variable _chars + set c [_default $c $_cols] + if { $attrs } { + _reset_attrs line_attrs } + while {$x < $c} { + if { $attrs } { + set char_attrs [lindex $_chars($x,$n) 1] + append result [apply_attrs line_attrs $char_attrs] + } + append result [lindex $_chars($x,$n) 0] + incr x + } + if { $attrs } { + _reset_attrs zero_attrs + set char_attrs [array get zero_attrs] + append result [apply_attrs line_attrs $char_attrs] + } + return $result +} - # Helper function for check_box. Returns empty string if the box - # is found, description of why not otherwise. - proc _check_box {x y width height} { - set x2 [expr {$x + $width - 1}] - set y2 [expr {$y + $height - 1}] +# Return the text of screen line N. Lines are 0-based. Start at column +# X. If C is non-empty, stop before column C. Columns are also +# zero-based. Annotate with attributes. +proc Term::get_string_with_attrs { n x c } { + return [get_string $n $x $c 1] +} - verbose -log "_check_box x=$x, y=$y, x2=$x2, y2=$y2, width=$width, height=$height" +# Return the text of screen line N. Lines are 0-based. If C is +# non-empty, stop before column C. Columns are also zero-based. If +# ATTRS, annotate with attributes. +proc Term::get_line_1 {n c attrs} { + return [get_string $n 0 $c $attrs] +} - set c [get_char $x $y] - if {$c != "+"} { - return "ul corner is $c, not +" - } +# Return the text of screen line N, without attributes. Lines are +# 0-based. If C is given, stop before column C. Columns are also +# zero-based. +proc Term::get_line {n {c ""} } { + return [get_line_1 $n $c 0] +} - set c [get_char $x $y2] - if {$c != "+"} { - return "ll corner is $c, not +" - } +# As get_line, but annotate with attributes. +proc Term::get_line_with_attrs {n {c ""}} { + return [get_line_1 $n $c 1] +} - set c [get_char $x2 $y] - if {$c != "+"} { - return "ur corner is $c, not +" - } +# Get just the character at (X, Y). +proc Term::get_char {x y} { + variable _chars + return [lindex $_chars($x,$y) 0] +} - set c [get_char $x2 $y2] - if {$c != "+"} { - return "lr corner is $c, not +" - } +# Get the entire screen as a string. +proc Term::get_all_lines {} { + variable _rows + variable _cols + variable _chars - # Note we do not check the full horizonal borders of the box. - # The top will contain a title, and the bottom may as well, if - # it is overlapped by some other border. However, at most a - # title should appear as '+-VERY LONG TITLE-+', so we can - # check for the '+-' on the left, and '-+' on the right. - set c [get_char [expr {$x + 1}] $y] - if {$c != "-"} { - return "ul title padding is $c, not -" + set result "" + for {set y 0} {$y < $_rows} {incr y} { + for {set x 0} {$x < $_cols} {incr x} { + append result [lindex $_chars($x,$y) 0] } + append result "\n" + } - set c [get_char [expr {$x2 - 1}] $y] - if {$c != "-"} { - return "ul title padding is $c, not -" - } + return $result +} - # Now check the vertical borders. - for {set i [expr {$y + 1}]} {$i < $y2 - 1} {incr i} { - set c [get_char $x $i] - if {$c != "|"} { - return "left side $i is $c, not |" - } +# Get the text just before the cursor. +proc Term::get_current_line {} { + variable _cur_col + variable _cur_row + return [get_line $_cur_row $_cur_col] +} - set c [get_char $x2 $i] - if {$c != "|"} { - return "right side $i is $c, not |" - } - } +# Helper function for check_box. Returns empty string if the box +# is found, description of why not otherwise. +proc Term::_check_box {x y width height} { + set x2 [expr {$x + $width - 1}] + set y2 [expr {$y + $height - 1}] - return "" + verbose -log "_check_box x=$x, y=$y, x2=$x2, y2=$y2, width=$width, height=$height" + + set c [get_char $x $y] + if {$c != "+"} { + return "ul corner is $c, not +" } - # Check for a box at the given coordinates. - proc check_box {test_name x y width height} { - dump_box $x $y $width $height - set why [_check_box $x $y $width $height] - if {$why == ""} { - pass $test_name - } else { - fail "$test_name ($why)" - } + set c [get_char $x $y2] + if {$c != "+"} { + return "ll corner is $c, not +" } - # Wait until a box appears at the given coordinates. - proc wait_for_box {test_name x y width height} { - while 1 { - if { [accept_gdb_output] == 0 } { - return 0 - } + set c [get_char $x2 $y] + if {$c != "+"} { + return "ur corner is $c, not +" + } - set why [_check_box $x $y $width $height] - if {$why == ""} { - pass $test_name - break - } - } + set c [get_char $x2 $y2] + if {$c != "+"} { + return "lr corner is $c, not +" } - # Check whether the text contents of the terminal match the - # regular expression. Note that text styling is not considered. - proc check_contents {test_name regexp} { - dump_screen - set contents [get_all_lines] - gdb_assert {[regexp -- $regexp $contents]} $test_name + # Note we do not check the full horizonal borders of the box. + # The top will contain a title, and the bottom may as well, if + # it is overlapped by some other border. However, at most a + # title should appear as '+-VERY LONG TITLE-+', so we can + # check for the '+-' on the left, and '-+' on the right. + set c [get_char [expr {$x + 1}] $y] + if {$c != "-"} { + return "ul title padding is $c, not -" } - # As check_contents, but check that the text contents of the terminal does - # not match the regular expression. - proc check_contents_not {test_name regexp} { - dump_screen - set contents [get_all_lines] - gdb_assert {![regexp -- $regexp $contents]} $test_name + set c [get_char [expr {$x2 - 1}] $y] + if {$c != "-"} { + return "ul title padding is $c, not -" } - # Get the region of the screen described by X, Y, WIDTH, and - # HEIGHT, and separate the lines using SEP. If ATTRS is true then - # include attribute information in the output. - proc get_region { x y width height sep { attrs false } } { - variable _chars + # Now check the vertical borders. + for {set i [expr {$y + 1}]} {$i < $y2 - 1} {incr i} { + set c [get_char $x $i] + if {$c != "|"} { + return "left side $i is $c, not |" + } - if { $attrs } { - _reset_attrs region_attrs + set c [get_char $x2 $i] + if {$c != "|"} { + return "right side $i is $c, not |" } + } - # Grab the contents of the box, join each line together - # using $sep. - set result "" - for {set yy $y} {$yy < [expr {$y + $height}]} {incr yy} { - if {$yy > $y} { - # Add the end of line sequence only if this isn't the - # first line. - append result $sep - } - for {set xx $x} {$xx < [expr {$x + $width}]} {incr xx} { - if { $attrs } { - set char_attrs [lindex $_chars($xx,$yy) 1] - append result [apply_attrs region_attrs $char_attrs] - } + return "" +} - append result [get_char $xx $yy] - } +# Check for a box at the given coordinates. +proc Term::check_box {test_name x y width height} { + dump_box $x $y $width $height + set why [_check_box $x $y $width $height] + if {$why == ""} { + pass $test_name + } else { + fail "$test_name ($why)" + } +} + +# Wait until a box appears at the given coordinates. +proc Term::wait_for_box {test_name x y width height} { + while 1 { + if { [accept_gdb_output] == 0 } { + return 0 } - if { $attrs } { - _reset_attrs zero_attrs - set char_attrs [array get zero_attrs] - append result [apply_attrs region_attrs $char_attrs] + + set why [_check_box $x $y $width $height] + if {$why == ""} { + pass $test_name + break } - return $result } +} - # Check that the region of the screen described by X, Y, WIDTH, - # and HEIGHT match REGEXP. This is like check_contents except - # only part of the screen is checked. This can be used to check - # the contents within a box (though check_box_contents is a better - # choice for boxes with a border). Return 1 if check succeeded. - proc check_region_contents_p { x y width height regexp } { - variable _chars - dump_box $x $y $width $height +# Check whether the text contents of the terminal match the +# regular expression. Note that text styling is not considered. +proc Term::check_contents {test_name regexp} { + dump_screen + set contents [get_all_lines] + gdb_assert {[regexp -- $regexp $contents]} $test_name +} - # Now grab the contents of the box, join each line together - # with a '\r\n' sequence and match against REGEXP. - set result [get_region $x $y $width $height "\r\n"] - return [regexp -- $regexp $result] - } +# As check_contents, but check that the text contents of the terminal does +# not match the regular expression. +proc Term::check_contents_not {test_name regexp} { + dump_screen + set contents [get_all_lines] + gdb_assert {![regexp -- $regexp $contents]} $test_name +} - # Check that the region of the screen described by X, Y, WIDTH, - # and HEIGHT match REGEXP. As check_region_contents_p, but produce - # a pass/fail message. - proc check_region_contents { test_name x y width height regexp } { - set ok [check_region_contents_p $x $y $width $height $regexp] - gdb_assert {$ok} $test_name - } +# Get the region of the screen described by X, Y, WIDTH, and +# HEIGHT, and separate the lines using SEP. If ATTRS is true then +# include attribute information in the output. +proc Term::get_region { x y width height sep { attrs false } } { + variable _chars - # Check the contents of a box on the screen. This is a little - # like check_contents, but doesn't check the whole screen - # contents, only the contents of a single box. This procedure - # includes (effectively) a call to check_box to ensure there is a - # box where expected, if there is then the contents of the box are - # matched against REGEXP. - proc check_box_contents {test_name x y width height regexp} { - variable _chars + if { $attrs } { + _reset_attrs region_attrs + } - dump_box $x $y $width $height - set why [_check_box $x $y $width $height] - if {$why != ""} { - fail "$test_name (box check: $why)" - return + # Grab the contents of the box, join each line together + # using $sep. + set result "" + for {set yy $y} {$yy < [expr {$y + $height}]} {incr yy} { + if {$yy > $y} { + # Add the end of line sequence only if this isn't the + # first line. + append result $sep } + for {set xx $x} {$xx < [expr {$x + $width}]} {incr xx} { + if { $attrs } { + set char_attrs [lindex $_chars($xx,$yy) 1] + append result [apply_attrs region_attrs $char_attrs] + } - check_region_contents $test_name [expr {$x + 1}] [expr {$y + 1}] \ - [expr {$width - 2}] [expr {$height - 2}] $regexp + append result [get_char $xx $yy] + } + } + if { $attrs } { + _reset_attrs zero_attrs + set char_attrs [array get zero_attrs] + append result [apply_attrs region_attrs $char_attrs] } + return $result +} - # A debugging function to dump the current screen, with line - # numbers. If ATTRS, annotate with attributes. - proc dump_screen { {attrs 0} } { - variable _rows - variable _cols - variable _cur_row - variable _cur_col +# Check that the region of the screen described by X, Y, WIDTH, +# and HEIGHT match REGEXP. This is like check_contents except +# only part of the screen is checked. This can be used to check +# the contents within a box (though check_box_contents is a better +# choice for boxes with a border). Return 1 if check succeeded. +proc Term::check_region_contents_p { x y width height regexp } { + variable _chars + dump_box $x $y $width $height - verbose -log "Screen Dump (size $_cols columns x $_rows rows, cursor at column $_cur_col, row $_cur_row):" + # Now grab the contents of the box, join each line together + # with a '\r\n' sequence and match against REGEXP. + set result [get_region $x $y $width $height "\r\n"] + return [regexp -- $regexp $result] +} - for {set y 0} {$y < $_rows} {incr y} { - set fmt [format %5d $y] - verbose -log "$fmt [get_line_1 $y "" $attrs]" - } +# Check that the region of the screen described by X, Y, WIDTH, +# and HEIGHT match REGEXP. As check_region_contents_p, but produce +# a pass/fail message. +proc Term::check_region_contents { test_name x y width height regexp } { + set ok [check_region_contents_p $x $y $width $height $regexp] + gdb_assert {$ok} $test_name +} + +# Check the contents of a box on the screen. This is a little +# like check_contents, but doesn't check the whole screen +# contents, only the contents of a single box. This procedure +# includes (effectively) a call to check_box to ensure there is a +# box where expected, if there is then the contents of the box are +# matched against REGEXP. +proc Term::check_box_contents {test_name x y width height regexp} { + variable _chars + + dump_box $x $y $width $height + set why [_check_box $x $y $width $height] + if {$why != ""} { + fail "$test_name (box check: $why)" + return } - # As dump_screen, but with attributes annotation. - proc dump_screen_with_attrs {} { - return [dump_screen 1] + check_region_contents $test_name [expr {$x + 1}] [expr {$y + 1}] \ + [expr {$width - 2}] [expr {$height - 2}] $regexp +} + +# A debugging function to dump the current screen, with line +# numbers. If ATTRS, annotate with attributes. +proc Term::dump_screen { {attrs 0} } { + variable _rows + variable _cols + variable _cur_row + variable _cur_col + + verbose -log "Screen Dump (size $_cols columns x $_rows rows, cursor at column $_cur_col, row $_cur_row):" + + for {set y 0} {$y < $_rows} {incr y} { + set fmt [format %5d $y] + verbose -log "$fmt [get_line_1 $y {} $attrs]" } +} - # A debugging function to dump a box from the current screen, with line - # numbers. - proc dump_box { x y width height } { - verbose -log "Box Dump ($width x $height) @ ($x, $y):" - set region [get_region $x $y $width $height "\n"] - set lines [split $region "\n"] - set nr $y - foreach line $lines { - set fmt [format %5d $nr] - verbose -log "$fmt $line" - incr nr - } +# As dump_screen, but with attributes annotation. +proc Term::dump_screen_with_attrs {} { + return [dump_screen 1] +} + +# A debugging function to dump a box from the current screen, with line +# numbers. +proc Term::dump_box { x y width height } { + verbose -log "Box Dump ($width x $height) @ ($x, $y):" + set region [get_region $x $y $width $height "\n"] + set lines [split $region "\n"] + set nr $y + foreach line $lines { + set fmt [format %5d $nr] + verbose -log "$fmt $line" + incr nr } +} - # Resize the terminal. - proc _do_resize {rows cols} { - variable _chars - variable _rows - variable _cols +# Resize the terminal. +proc Term::_do_resize {rows cols} { + variable _chars + variable _rows + variable _cols - set old_rows [expr {min ($_rows, $rows)}] - set old_cols [expr {min ($_cols, $cols)}] + set old_rows [expr {min ($_rows, $rows)}] + set old_cols [expr {min ($_cols, $cols)}] - # Copy locally. - array set local_chars [array get _chars] - unset _chars + # Copy locally. + array set local_chars [array get _chars] + unset _chars - set _rows $rows - set _cols $cols - _clear_lines 0 $_rows + set _rows $rows + set _cols $cols + _clear_lines 0 $_rows - for {set x 0} {$x < $old_cols} {incr x} { - for {set y 0} {$y < $old_rows} {incr y} { - set _chars($x,$y) $local_chars($x,$y) - } + for {set x 0} {$x < $old_cols} {incr x} { + for {set y 0} {$y < $old_rows} {incr y} { + set _chars($x,$y) $local_chars($x,$y) } } +} - proc resize {rows cols {wait_for_msg 1}} { - variable _rows - variable _cols - variable _resize_count +proc Term::resize {rows cols {wait_for_msg 1}} { + variable _rows + variable _cols + variable _resize_count - # expect handles each argument to stty separately. This means - # that gdb will see SIGWINCH twice. Rather than rely on this - # behavior (which, after all, could be changed), we make it - # explicit here. This also simplifies waiting for the redraw. - _do_resize $rows $_cols - stty rows $_rows < $::gdb_tty_name - if { $wait_for_msg } { - wait_for "@@ resize done $_resize_count, size = ${_cols}x${rows}" - } - incr _resize_count - _do_resize $_rows $cols - stty columns $_cols < $::gdb_tty_name - if { $wait_for_msg } { - wait_for "@@ resize done $_resize_count, size = ${_cols}x${rows}" - } - incr _resize_count - } + # expect handles each argument to stty separately. This means + # that gdb will see SIGWINCH twice. Rather than rely on this + # behavior (which, after all, could be changed), we make it + # explicit here. This also simplifies waiting for the redraw. + _do_resize $rows $_cols + stty rows $_rows < $::gdb_tty_name + if { $wait_for_msg } { + wait_for "@@ resize done $_resize_count, size = ${_cols}x${rows}" + } + incr _resize_count + _do_resize $_rows $cols + stty columns $_cols < $::gdb_tty_name + if { $wait_for_msg } { + wait_for "@@ resize done $_resize_count, size = ${_cols}x${rows}" + } + incr _resize_count } diff --git a/gdb/testsuite/make-check-all.sh b/gdb/testsuite/make-check-all.sh index c2fbadb..ab72574 100755 --- a/gdb/testsuite/make-check-all.sh +++ b/gdb/testsuite/make-check-all.sh @@ -192,7 +192,7 @@ do_tests () # Run make check. make $maketarget \ - RUNTESTFLAGS="${rtf[*]} ${tests[*]}" \ + RUNTESTFLAGS="${rtf[*]}" TESTS="${tests[*]}" \ 2>&1 \ | summary @@ -216,7 +216,7 @@ do_tests () cp gdb.sum gdb.log "$dir" # Record the 'make check' command to enable easy re-running. - echo "make $maketarget RUNTESTFLAGS=\"${rtf[*]} ${tests[*]}\"" \ + echo "make $maketarget RUNTESTFLAGS=\"${rtf[*]}\" TESTS=\"${tests[*]}\"" \ > "$dir/make-check.sh" fi } diff --git a/gdb/thread.c b/gdb/thread.c index b659463..920d8dc 100644 --- a/gdb/thread.c +++ b/gdb/thread.c @@ -1038,6 +1038,37 @@ pc_in_thread_step_range (CORE_ADDR pc, struct thread_info *thread) && pc < thread->control.step_range_end); } +/* The options for the "info threads" command. */ + +struct info_threads_opts +{ + /* For "-gid". */ + bool show_global_ids = false; + /* For "-running". */ + bool show_running_threads = false; + /* For "-stopped". */ + bool show_stopped_threads = false; +}; + +static const gdb::option::option_def info_threads_option_defs[] = { + + gdb::option::flag_option_def<info_threads_opts> { + "gid", + [] (info_threads_opts *opts) { return &opts->show_global_ids; }, + N_("Show global thread IDs."), + }, + gdb::option::flag_option_def<info_threads_opts> { + "running", + [] (info_threads_opts *opts) { return &opts->show_running_threads; }, + N_("Show running threads only."), + }, + gdb::option::flag_option_def<info_threads_opts> { + "stopped", + [] (info_threads_opts *opts) { return &opts->show_stopped_threads; }, + N_("Show stopped threads only."), + }, +}; + /* Helper for print_thread_info. Returns true if THR should be printed. If REQUESTED_THREADS, a list of GDB ids/ranges, is not NULL, only print THR if its ID is included in the list. GLOBAL_IDS @@ -1046,11 +1077,13 @@ pc_in_thread_step_range (CORE_ADDR pc, struct thread_info *thread) is a thread from the process PID. Otherwise, threads from all attached PIDs are printed. If both REQUESTED_THREADS is not NULL and PID is not -1, then the thread is printed if it belongs to the - specified process. Otherwise, an error is raised. */ + specified process. Otherwise, an error is raised. OPTS is the + options of the "info threads" command. */ static bool -should_print_thread (const char *requested_threads, int default_inf_num, - int global_ids, int pid, struct thread_info *thr) +should_print_thread (const char *requested_threads, + const info_threads_opts &opts, int default_inf_num, + int global_ids, int pid, thread_info *thr) { if (requested_threads != NULL && *requested_threads != '\0') { @@ -1075,7 +1108,17 @@ should_print_thread (const char *requested_threads, int default_inf_num, if (thr->state == THREAD_EXITED) return false; - return true; + bool is_stopped = (thr->state == THREAD_STOPPED); + if (opts.show_stopped_threads && is_stopped) + return true; + + bool is_running = (thr->state == THREAD_RUNNING); + if (opts.show_running_threads && is_running) + return true; + + /* If the user did not pass a filter flag, show the thread. */ + return (!opts.show_stopped_threads + && !opts.show_running_threads); } /* Return the string to display in "info threads"'s "Target Id" @@ -1104,8 +1147,8 @@ thread_target_id_str (thread_info *tp) static void do_print_thread (ui_out *uiout, const char *requested_threads, - int global_ids, int pid, int show_global_ids, - int default_inf_num, thread_info *tp, + const info_threads_opts &opts, int global_ids, + int pid, int default_inf_num, thread_info *tp, thread_info *current_thread) { int core; @@ -1114,7 +1157,7 @@ do_print_thread (ui_out *uiout, const char *requested_threads, if (current_thread != nullptr) switch_to_thread (current_thread); - if (!should_print_thread (requested_threads, default_inf_num, + if (!should_print_thread (requested_threads, opts, default_inf_num, global_ids, pid, tp)) return; @@ -1130,7 +1173,7 @@ do_print_thread (ui_out *uiout, const char *requested_threads, uiout->field_string ("id-in-tg", print_thread_id (tp)); } - if (show_global_ids || uiout->is_mi_like_p ()) + if (opts.show_global_ids || uiout->is_mi_like_p ()) uiout->field_signed ("id", tp->global_num); /* Switch to the thread (and inferior / target). */ @@ -1191,23 +1234,22 @@ do_print_thread (ui_out *uiout, const char *requested_threads, static void print_thread (ui_out *uiout, const char *requested_threads, - int global_ids, int pid, int show_global_ids, + const info_threads_opts &opts, int global_ids, int pid, int default_inf_num, thread_info *tp, thread_info *current_thread) { do_with_buffered_output (do_print_thread, uiout, requested_threads, - global_ids, pid, show_global_ids, - default_inf_num, tp, current_thread); + opts, global_ids, pid, default_inf_num, tp, + current_thread); } /* Like print_thread_info, but in addition, GLOBAL_IDS indicates whether REQUESTED_THREADS is a list of global or per-inferior - thread ids. */ + thread ids. OPTS is the options of the "info threads" command. */ static void print_thread_info_1 (struct ui_out *uiout, const char *requested_threads, - int global_ids, int pid, - int show_global_ids) + const info_threads_opts &opts, int global_ids, int pid) { int default_inf_num = current_inferior ()->num; @@ -1235,19 +1277,21 @@ print_thread_info_1 (struct ui_out *uiout, const char *requested_threads, list_emitter.emplace (uiout, "threads"); else { - int n_threads = 0; + int n_matching_threads = 0; /* The width of the "Target Id" column. Grown below to accommodate the largest entry. */ size_t target_id_col_width = 17; for (thread_info *tp : all_threads ()) { + any_thread = true; + /* In case REQUESTED_THREADS contains $_thread. */ if (current_thread != nullptr) switch_to_thread (current_thread); - if (!should_print_thread (requested_threads, default_inf_num, - global_ids, pid, tp)) + if (!should_print_thread (requested_threads, opts, + default_inf_num, global_ids, pid, tp)) continue; /* Switch inferiors so we're looking at the right @@ -1258,25 +1302,24 @@ print_thread_info_1 (struct ui_out *uiout, const char *requested_threads, = std::max (target_id_col_width, thread_target_id_str (tp).size ()); - ++n_threads; + ++n_matching_threads; } - if (n_threads == 0) + if (n_matching_threads == 0) { - if (requested_threads == NULL || *requested_threads == '\0') + if (!any_thread) uiout->message (_("No threads.\n")); else - uiout->message (_("No threads match '%s'.\n"), - requested_threads); + uiout->message (_("No threads matched.\n")); return; } - table_emitter.emplace (uiout, show_global_ids ? 5 : 4, - n_threads, "threads"); + table_emitter.emplace (uiout, opts.show_global_ids ? 5 : 4, + n_matching_threads, "threads"); uiout->table_header (1, ui_left, "current", ""); uiout->table_header (4, ui_left, "id-in-tg", "Id"); - if (show_global_ids) + if (opts.show_global_ids) uiout->table_header (4, ui_left, "id", "GId"); uiout->table_header (target_id_col_width, ui_left, "target-id", "Target Id"); @@ -1287,13 +1330,11 @@ print_thread_info_1 (struct ui_out *uiout, const char *requested_threads, for (inferior *inf : all_inferiors ()) for (thread_info *tp : inf->threads ()) { - any_thread = true; - if (tp == current_thread && tp->state == THREAD_EXITED) current_exited = true; - print_thread (uiout, requested_threads, global_ids, pid, - show_global_ids, default_inf_num, tp, current_thread); + print_thread (uiout, requested_threads, opts, global_ids, pid, + default_inf_num, tp, current_thread); } /* This end scope restores the current thread and the frame @@ -1322,27 +1363,10 @@ void print_thread_info (struct ui_out *uiout, const char *requested_threads, int pid) { - print_thread_info_1 (uiout, requested_threads, 1, pid, 0); + info_threads_opts opts; + print_thread_info_1 (uiout, requested_threads, opts, 1, pid); } -/* The options for the "info threads" command. */ - -struct info_threads_opts -{ - /* For "-gid". */ - bool show_global_ids = false; -}; - -static const gdb::option::option_def info_threads_option_defs[] = { - - gdb::option::flag_option_def<info_threads_opts> { - "gid", - [] (info_threads_opts *opts) { return &opts->show_global_ids; }, - N_("Show global thread IDs."), - }, - -}; - /* Create an option_def_group for the "info threads" options, with IT_OPTS as context. */ @@ -1367,7 +1391,7 @@ info_threads_command (const char *arg, int from_tty) gdb::option::process_options (&arg, gdb::option::PROCESS_OPTIONS_UNKNOWN_IS_ERROR, grp); - print_thread_info_1 (current_uiout, arg, 0, -1, it_opts.show_global_ids); + print_thread_info_1 (current_uiout, arg, it_opts, 0, -1); } /* Completer for the "info threads" command. */ @@ -2287,9 +2311,7 @@ static const struct internalvar_funcs inferior_thread_count_funcs = NULL, }; -void _initialize_thread (); -void -_initialize_thread () +INIT_GDB_FILE (thread) { static struct cmd_list_element *thread_apply_list = NULL; cmd_list_element *c; diff --git a/gdb/tic6x-linux-tdep.c b/gdb/tic6x-linux-tdep.c index 280d46d..5b3d402 100644 --- a/gdb/tic6x-linux-tdep.c +++ b/gdb/tic6x-linux-tdep.c @@ -169,7 +169,7 @@ tic6x_uclinux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) linux_init_abi (info, gdbarch, 0); /* Shared library handling. */ - set_gdbarch_so_ops (gdbarch, &dsbt_so_ops); + set_gdbarch_make_solib_ops (gdbarch, make_dsbt_solib_ops); tdep->syscall_next_pc = tic6x_linux_syscall_next_pc; @@ -203,9 +203,7 @@ tic6x_uclinux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) &tic6x_linux_rt_sigreturn_tramp_frame); } -void _initialize_tic6x_linux_tdep (); -void -_initialize_tic6x_linux_tdep () +INIT_GDB_FILE (tic6x_linux_tdep) { gdbarch_register_osabi (bfd_arch_tic6x, 0, GDB_OSABI_LINUX, tic6x_uclinux_init_abi); diff --git a/gdb/tic6x-tdep.c b/gdb/tic6x-tdep.c index 062a974..56d3098 100644 --- a/gdb/tic6x-tdep.c +++ b/gdb/tic6x-tdep.c @@ -1267,7 +1267,7 @@ tic6x_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) dwarf2_frame_set_init_reg (gdbarch, tic6x_dwarf2_frame_init_reg); /* Single stepping. */ - set_gdbarch_software_single_step (gdbarch, tic6x_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, tic6x_software_single_step); /* Call dummy code. */ set_gdbarch_frame_align (gdbarch, tic6x_frame_align); @@ -1293,9 +1293,7 @@ tic6x_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_tic6x_tdep (); -void -_initialize_tic6x_tdep () +INIT_GDB_FILE (tic6x_tdep) { gdbarch_register (bfd_arch_tic6x, tic6x_gdbarch_init); } diff --git a/gdb/tilegx-linux-nat.c b/gdb/tilegx-linux-nat.c index bd077b2..99f2cc4 100644 --- a/gdb/tilegx-linux-nat.c +++ b/gdb/tilegx-linux-nat.c @@ -163,9 +163,7 @@ tilegx_linux_nat_target::store_registers (struct regcache *regcache, perror_with_name (_("Couldn't write registers")); } -void _initialize_tile_linux_nat (); -void -_initialize_tile_linux_nat () +INIT_GDB_FILE (tile_linux_nat) { linux_target = &the_tilegx_linux_nat_target; add_inf_child_target (&the_tilegx_linux_nat_target); diff --git a/gdb/tilegx-linux-tdep.c b/gdb/tilegx-linux-tdep.c index a0e6954..f54e280 100644 --- a/gdb/tilegx-linux-tdep.c +++ b/gdb/tilegx-linux-tdep.c @@ -19,6 +19,7 @@ #include "osabi.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "glibc-tdep.h" #include "solib-svr4.h" #include "symtab.h" @@ -119,11 +120,9 @@ tilegx_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) /* GNU/Linux uses SVR4-style shared libraries. */ if (arch_size == 32) - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); else - set_solib_svr4_fetch_link_map_offsets (gdbarch, - linux_lp64_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_lp64_svr4_solib_ops); /* Enable TLS support. */ set_gdbarch_fetch_tls_load_module_address (gdbarch, @@ -134,9 +133,7 @@ tilegx_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); } -void _initialize_tilegx_linux_tdep (); -void -_initialize_tilegx_linux_tdep () +INIT_GDB_FILE (tilegx_linux_tdep) { gdbarch_register_osabi (bfd_arch_tilegx, bfd_mach_tilegx, GDB_OSABI_LINUX, tilegx_linux_init_abi); diff --git a/gdb/tilegx-tdep.c b/gdb/tilegx-tdep.c index 4922fff..a153f65 100644 --- a/gdb/tilegx-tdep.c +++ b/gdb/tilegx-tdep.c @@ -1021,9 +1021,7 @@ tilegx_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_tilegx_tdep (); -void -_initialize_tilegx_tdep () +INIT_GDB_FILE (tilegx_tdep) { gdbarch_register (bfd_arch_tilegx, tilegx_gdbarch_init); } @@ -34,6 +34,7 @@ #include "value.h" #include "language.h" #include "terminal.h" +#include "gdbsupport/cleanups.h" #include "gdbsupport/job-control.h" #include "annotate.h" #include "completer.h" @@ -415,7 +416,7 @@ wait_sync_command_done (void) point. */ scoped_enable_commit_resumed enable ("sync wait"); - while (gdb_do_one_event () >= 0) + while (current_interpreter ()->do_one_event () >= 0) if (ui->prompt_state != PROMPT_BLOCKED) break; } @@ -1031,7 +1032,7 @@ gdb_readline_wrapper (const char *prompt) (*after_char_processing_hook) (); gdb_assert (after_char_processing_hook == NULL); - while (gdb_do_one_event () >= 0) + while (current_interpreter ()->do_one_event () >= 0) if (gdb_readline_wrapper_done) break; @@ -1311,7 +1312,7 @@ print_gdb_version (struct ui_file *stream, bool interactive) /* Second line is a copyright notice. */ gdb_printf (stream, - "Copyright (C) 2024 Free Software Foundation, Inc.\n"); + "Copyright (C) 2025 Free Software Foundation, Inc.\n"); /* Following the copyright is a brief statement that the program is free software, that users are free to copy and change it on @@ -1595,6 +1596,11 @@ This GDB was configured as follows:\n\ --with-system-gdbinit-dir=%s%s\n\ "), SYSTEM_GDBINIT_DIR, SYSTEM_GDBINIT_DIR_RELOCATABLE ? " (relocatable)" : ""); +#ifdef SUPPORTED_BINARY_FILE_FORMATS + gdb_printf (stream, _("\ + --enable-binary-file-formats=%s\n"), SUPPORTED_BINARY_FILE_FORMATS); +#endif + /* We assume "relocatable" will be printed at least once, thus we always print this text. It's a reasonably safe assumption for now. */ gdb_printf (stream, _("\n\ @@ -2347,9 +2353,7 @@ gdb_init () init_colorsupport_var (); } -void _initialize_top (); -void -_initialize_top () +INIT_GDB_FILE (top) { /* Determine a default value for the history filename. */ const char *tmpenv = getenv ("GDBHISTFILE"); diff --git a/gdb/tracectf.c b/gdb/tracectf.c index 1650e67..0f80d08 100644 --- a/gdb/tracectf.c +++ b/gdb/tracectf.c @@ -1174,7 +1174,7 @@ ctf_target_open (const char *args, int from_tty) merge_uploaded_trace_state_variables (&uploaded_tsvs); merge_uploaded_tracepoints (&uploaded_tps); - post_create_inferior (from_tty); + post_create_inferior (from_tty, true); } /* This is the implementation of target_ops method to_close. Destroy @@ -1717,9 +1717,7 @@ ctf_target::traceframe_info () /* module initialization */ -void _initialize_ctf (); -void -_initialize_ctf () +INIT_GDB_FILE (ctf) { #if HAVE_LIBBABELTRACE add_target (ctf_target_info, ctf_target_open, diff --git a/gdb/tracefile-tfile.c b/gdb/tracefile-tfile.c index 5f8b338..a45001c 100644 --- a/gdb/tracefile-tfile.c +++ b/gdb/tracefile-tfile.c @@ -567,7 +567,7 @@ tfile_target_open (const char *arg, int from_tty) merge_uploaded_tracepoints (&uploaded_tps); - post_create_inferior (from_tty); + post_create_inferior (from_tty, true); } /* Interpret the given line from the definitions part of the trace @@ -1116,9 +1116,7 @@ tfile_append_tdesc_line (const char *line) trace_tdesc += "\n"; } -void _initialize_tracefile_tfile (); -void -_initialize_tracefile_tfile () +INIT_GDB_FILE (tracefile_tfile) { add_target (tfile_target_info, tfile_target_open, filename_maybe_quoted_completer); diff --git a/gdb/tracefile.c b/gdb/tracefile.c index dac2eb7..19b4d1e 100644 --- a/gdb/tracefile.c +++ b/gdb/tracefile.c @@ -473,9 +473,7 @@ tracefile_target::get_trace_status (struct trace_status *ts) return -1; } -void _initialize_tracefile (); -void -_initialize_tracefile () +INIT_GDB_FILE (tracefile) { add_com ("tsave", class_trace, tsave_command, _("\ Save the trace data to a file.\n\ diff --git a/gdb/tracepoint.c b/gdb/tracepoint.c index b431468..58aad44 100644 --- a/gdb/tracepoint.c +++ b/gdb/tracepoint.c @@ -208,16 +208,16 @@ set_tracepoint_num (int num) static void set_traceframe_context (const frame_info_ptr &trace_frame) { - CORE_ADDR trace_pc; + std::optional<CORE_ADDR> trace_pc; struct symbol *traceframe_fun; symtab_and_line traceframe_sal; /* Save as globals for internal use. */ if (trace_frame != NULL - && get_frame_pc_if_available (trace_frame, &trace_pc)) + && (trace_pc = get_frame_pc_if_available (trace_frame))) { - traceframe_sal = find_pc_line (trace_pc, 0); - traceframe_fun = find_pc_function (trace_pc); + traceframe_sal = find_pc_line (*trace_pc, 0); + traceframe_fun = find_pc_function (*trace_pc); /* Save linenumber as "$trace_line", a debugger variable visible to users. */ @@ -689,14 +689,14 @@ validate_actionline (const char *line, tracepoint *t) (exp->op.get ())); sym = vvop->get_symbol (); - if (sym->aclass () == LOC_CONST) + if (sym->loc_class () == LOC_CONST) { error (_("constant `%s' (value %s) " "will not be collected."), sym->print_name (), plongest (sym->value_longest ())); } - else if (sym->aclass () == LOC_OPTIMIZED_OUT) + else if (sym->loc_class () == LOC_OPTIMIZED_OUT) { error (_("`%s' is optimized away " "and cannot be collected."), @@ -916,11 +916,11 @@ collection_list::collect_symbol (struct symbol *sym, int treat_as_expr = 0; len = check_typedef (sym->type ())->length (); - switch (sym->aclass ()) + switch (sym->loc_class ()) { default: gdb_printf ("%s: don't know symbol class %d\n", - sym->print_name (), sym->aclass ()); + sym->print_name (), sym->loc_class ()); break; case LOC_CONST: gdb_printf ("constant %s (value %s) will not be collected.\n", @@ -2508,12 +2508,12 @@ info_scope_command (const char *args_in, int from_tty) gdb_stdout); else { - switch (sym->aclass ()) + switch (sym->loc_class ()) { default: case LOC_UNDEF: /* Messed up symbol? */ gdb_printf ("a bogus symbol, class %d.\n", - sym->aclass ()); + sym->loc_class ()); count--; /* Don't count this one. */ continue; case LOC_CONST: @@ -3919,9 +3919,7 @@ static const struct internalvar_funcs sdata_funcs = cmd_list_element *while_stepping_cmd_element = nullptr; /* module initialization */ -void _initialize_tracepoint (); -void -_initialize_tracepoint () +INIT_GDB_FILE (tracepoint) { struct cmd_list_element *c; diff --git a/gdb/tui/tui-disasm.c b/gdb/tui/tui-disasm.c index 5488760..07453b4 100644 --- a/gdb/tui/tui-disasm.c +++ b/gdb/tui/tui-disasm.c @@ -100,6 +100,9 @@ tui_disassemble (struct gdbarch *gdbarch, { bool term_out = disassembler_styling && gdb_stdout->can_emit_style_escape (); string_file gdb_dis_out (term_out); + struct ui_file *stream = (addr_size == nullptr + ? (decltype (stream))&null_stream + : (decltype (stream))&gdb_dis_out); /* Must start with an empty list. */ asm_lines.clear (); @@ -108,11 +111,13 @@ tui_disassemble (struct gdbarch *gdbarch, for (int i = 0; i < count; ++i) { tui_asm_line tal; - CORE_ADDR orig_pc = pc; + + /* Save the instruction address. */ + tal.addr = pc; try { - pc = pc + gdb_print_insn (gdbarch, pc, &gdb_dis_out, NULL); + pc += gdb_print_insn (gdbarch, pc, stream, NULL); } catch (const gdb_exception_error &except) { @@ -124,25 +129,24 @@ tui_disassemble (struct gdbarch *gdbarch, return pc; } + /* If that's all we need, continue. */ + if (addr_size == nullptr) + { + asm_lines.push_back (std::move (tal)); + continue; + } + /* Capture the disassembled instruction. */ tal.insn = gdb_dis_out.release (); /* And capture the address the instruction is at. */ - tal.addr = orig_pc; - print_address (gdbarch, orig_pc, &gdb_dis_out); + print_address (gdbarch, tal.addr, &gdb_dis_out); tal.addr_string = gdb_dis_out.release (); + tal.addr_size = (term_out + ? len_without_escapes (tal.addr_string) + : tal.addr_string.size ()); - if (addr_size != nullptr) - { - size_t new_size; - - if (term_out) - new_size = len_without_escapes (tal.addr_string); - else - new_size = tal.addr_string.size (); - *addr_size = std::max (*addr_size, new_size); - tal.addr_size = new_size; - } + *addr_size = std::max (*addr_size, tal.addr_size); asm_lines.push_back (std::move (tal)); } @@ -546,9 +550,7 @@ run_tests () } /* namespace selftests */ #endif /* GDB_SELF_TEST */ -void _initialize_tui_disasm (); -void -_initialize_tui_disasm () +INIT_GDB_FILE (tui_disasm) { #if GDB_SELF_TEST selftests::register_test ("tui-disasm", selftests::tui::disasm::run_tests); diff --git a/gdb/tui/tui-file.c b/gdb/tui/tui-file.c index 39aee9f..df6f503 100644 --- a/gdb/tui/tui-file.c +++ b/gdb/tui/tui-file.c @@ -21,7 +21,7 @@ #include "tui/tui-command.h" void -tui_file::puts (const char *linebuffer) +tui_file::do_puts (const char *linebuffer) { tui_puts (linebuffer); if (!m_buffered) @@ -29,7 +29,7 @@ tui_file::puts (const char *linebuffer) } void -tui_file::write (const char *buf, long length_buf) +tui_file::do_write (const char *buf, long length_buf) { tui_write (buf, length_buf); if (!m_buffered) @@ -41,5 +41,5 @@ tui_file::flush () { if (m_buffered) tui_cmd_win ()->refresh_window (); - stdio_file::flush (); + escape_buffering_file::flush (); } diff --git a/gdb/tui/tui-file.h b/gdb/tui/tui-file.h index dbd6fa9..b6dc058 100644 --- a/gdb/tui/tui-file.h +++ b/gdb/tui/tui-file.h @@ -23,18 +23,21 @@ /* A STDIO-like output stream for the TUI. */ -class tui_file : public stdio_file +class tui_file : public escape_buffering_file { public: tui_file (FILE *stream, bool buffered) - : stdio_file (stream), + : escape_buffering_file (stream), m_buffered (buffered) {} - void write (const char *buf, long length_buf) override; - void puts (const char *) override; void flush () override; +protected: + + void do_write (const char *buf, long length_buf) override; + void do_puts (const char *) override; + private: /* True if this stream is buffered. */ diff --git a/gdb/tui/tui-hooks.c b/gdb/tui/tui-hooks.c index 814ddac..024fedd 100644 --- a/gdb/tui/tui-hooks.c +++ b/gdb/tui/tui-hooks.c @@ -262,9 +262,7 @@ tui_remove_hooks (void) tui_attach_detach_observers (false); } -void _initialize_tui_hooks (); -void -_initialize_tui_hooks () +INIT_GDB_FILE (tui_hooks) { /* Install the permanent hooks. */ gdb::observers::new_objfile.attach (tui_new_objfile_hook, "tui-hooks"); diff --git a/gdb/tui/tui-interp.c b/gdb/tui/tui-interp.c index 53acf82..3d0e152 100644 --- a/gdb/tui/tui-interp.c +++ b/gdb/tui/tui-interp.c @@ -161,9 +161,7 @@ tui_interp_factory (const char *name) return new tui_interp (name); } -void _initialize_tui_interp (); -void -_initialize_tui_interp () +INIT_GDB_FILE (tui_interp) { interp_factory_register (INTERP_TUI, tui_interp_factory); diff --git a/gdb/tui/tui-io.c b/gdb/tui/tui-io.c index 1b4cc82..c97e8fd 100644 --- a/gdb/tui/tui-io.c +++ b/gdb/tui/tui-io.c @@ -319,6 +319,8 @@ tui_apply_style (WINDOW *w, ui_file_style style) wattron (w, A_NORMAL); wattroff (w, A_BOLD); wattroff (w, A_DIM); + wattroff (w, A_ITALIC); + wattroff (w, A_UNDERLINE); wattroff (w, A_REVERSE); if (last_color_pair != -1) wattroff (w, COLOR_PAIR (last_color_pair)); @@ -366,6 +368,12 @@ tui_apply_style (WINDOW *w, ui_file_style style) gdb_assert_not_reached ("invalid intensity"); } + if (style.is_italic ()) + wattron (w, A_ITALIC); + + if (style.is_underline ()) + wattron (w, A_UNDERLINE); + if (style.is_reverse ()) wattron (w, A_REVERSE); diff --git a/gdb/tui/tui-layout.c b/gdb/tui/tui-layout.c index 73ba0c6..558055d 100644 --- a/gdb/tui/tui-layout.c +++ b/gdb/tui/tui-layout.c @@ -1294,9 +1294,7 @@ tui_new_layout_command (const char *spec, int from_tty) /* Function to initialize gdb commands, for tui window layout manipulation. */ -void _initialize_tui_layout (); -void -_initialize_tui_layout () +INIT_GDB_FILE (tui_layout) { struct cmd_list_element *layout_cmd = add_basic_prefix_cmd ("layout", class_tui, _("\ diff --git a/gdb/tui/tui-regs.c b/gdb/tui/tui-regs.c index 0b8cb85..ac2757a 100644 --- a/gdb/tui/tui-regs.c +++ b/gdb/tui/tui-regs.c @@ -566,9 +566,7 @@ tui_reggroup_completer (struct cmd_list_element *ignore, complete_on_enum (tracker, extra, text, word); } -void _initialize_tui_regs (); -void -_initialize_tui_regs () +INIT_GDB_FILE (tui_regs) { struct cmd_list_element **tuicmd, *cmd; diff --git a/gdb/tui/tui-status.c b/gdb/tui/tui-status.c index 484f4e5..1e09975 100644 --- a/gdb/tui/tui-status.c +++ b/gdb/tui/tui-status.c @@ -271,10 +271,14 @@ tui_show_frame_info (const frame_info_ptr &fi) symtab_and_line sal = find_frame_sal (fi); const char *func_name; + std::optional<CORE_ADDR> tmp_pc = get_frame_pc_if_available (fi); /* find_frame_sal does not always set PC, but we want to ensure that it is available in the SAL. */ - if (get_frame_pc_if_available (fi, &sal.pc)) - func_name = tui_get_function_from_frame (fi); + if (tmp_pc.has_value ()) + { + sal.pc = *tmp_pc; + func_name = tui_get_function_from_frame (fi); + } else func_name = _("<unavailable>"); @@ -325,9 +329,7 @@ tui_update_command (const char *arg, int from_tty) /* Function to initialize gdb commands, for tui window stack manipulation. */ -void _initialize_tui_stack (); -void -_initialize_tui_stack () +INIT_GDB_FILE (tui_stack) { add_com ("update", class_tui, tui_update_command, _("\ diff --git a/gdb/tui/tui-win.c b/gdb/tui/tui-win.c index f44600d..d4fbbf1 100644 --- a/gdb/tui/tui-win.c +++ b/gdb/tui/tui-win.c @@ -1091,9 +1091,7 @@ bool tui_left_margin_verbose = false; /* Function to initialize gdb commands, for tui window manipulation. */ -void _initialize_tui_win (); -void -_initialize_tui_win () +INIT_GDB_FILE (tui_win) { static struct cmd_list_element *tui_setlist; static struct cmd_list_element *tui_showlist; diff --git a/gdb/tui/tui-winsource.c b/gdb/tui/tui-winsource.c index a545c48..618d72b 100644 --- a/gdb/tui/tui-winsource.c +++ b/gdb/tui/tui-winsource.c @@ -461,7 +461,9 @@ tui_source_window_base::rerender () /* find_frame_sal does not always set SAL.PC, but we want to ensure that it is available in the SAL before updating the window. */ - get_frame_pc_if_available (frame, &sal.pc); + std::optional<CORE_ADDR> tmp_pc = get_frame_pc_if_available (frame); + if (tmp_pc.has_value ()) + sal.pc = *tmp_pc; maybe_update (get_frame_arch (frame), sal); update_exec_info (false); diff --git a/gdb/tui/tui.c b/gdb/tui/tui.c index 2c7a6a0..01aee2f 100644 --- a/gdb/tui/tui.c +++ b/gdb/tui/tui.c @@ -125,6 +125,19 @@ tui_rl_switch_mode (int notused1, int notused2) } else { + /* If we type "foo", entering it into the readline buffer + + (gdb) foo + ^ + and then switch to TUI and back, we may get back + + (gdb) foo + ^ + which is confusing because "foo" is no longer part of the + readline buffer. Fix this by clearing it before switching to + TUI. */ + rl_clear_visible_line (); + /* If tui_enable throws, we'll re-prep below. */ rl_deprep_terminal (); tui_enable (); @@ -618,9 +631,7 @@ tui_get_command_dimension (unsigned int *width, return true; } -void _initialize_tui (); -void -_initialize_tui () +INIT_GDB_FILE (tui) { struct cmd_list_element **tuicmd; diff --git a/gdb/typeprint.c b/gdb/typeprint.c index 4bc5947..8f2836a 100644 --- a/gdb/typeprint.c +++ b/gdb/typeprint.c @@ -219,7 +219,7 @@ typedef_hash_table::add_template_parameters (struct type *t) struct decl_field *tf; /* We only want type-valued template parameters in the hash. */ - if (TYPE_TEMPLATE_ARGUMENT (t, i)->aclass () != LOC_TYPEDEF) + if (TYPE_TEMPLATE_ARGUMENT (t, i)->loc_class () != LOC_TYPEDEF) continue; tf = XOBNEW (&m_storage, struct decl_field); @@ -735,9 +735,7 @@ Display of struct members offsets and sizes in hexadecimal is %s\n"), value); } -void _initialize_typeprint (); -void -_initialize_typeprint () +INIT_GDB_FILE (typeprint) { struct cmd_list_element *c; diff --git a/gdb/ui-file.c b/gdb/ui-file.c index f86b6b1..2e5c06f 100644 --- a/gdb/ui-file.c +++ b/gdb/ui-file.c @@ -408,7 +408,7 @@ tee_file::can_emit_style_escape () /* See ui-file.h. */ void -no_terminal_escape_file::write (const char *buf, long length_buf) +escape_buffering_file::write (const char *buf, long length_buf) { std::string copy (buf, length_buf); this->puts (copy.c_str ()); @@ -417,7 +417,60 @@ no_terminal_escape_file::write (const char *buf, long length_buf) /* See ui-file.h. */ void -no_terminal_escape_file::puts (const char *buf) +escape_buffering_file::puts (const char *buf) +{ + std::string local_buffer; + if (!m_buffer.empty ()) + { + gdb_assert (m_buffer[0] == '\033'); + m_buffer += buf; + /* If we need to keep buffering, we'll handle that below. */ + local_buffer = std::move (m_buffer); + buf = local_buffer.c_str (); + } + + while (*buf != '\0') + { + const char *esc = strchr (buf, '\033'); + if (esc == nullptr) + break; + + /* First, write out any prefix. */ + if (esc > buf) + { + do_write (buf, esc - buf); + buf = esc; + } + + int n_read = 0; + ansi_escape_result seen = examine_ansi_escape (esc, &n_read); + if (seen == ansi_escape_result::INCOMPLETE) + { + /* Start buffering. */ + m_buffer = buf; + return; + } + else if (seen == ansi_escape_result::NO_MATCH) + { + /* Just emit the ESC . */ + n_read = 1; + } + else + gdb_assert (seen == ansi_escape_result::MATCHED); + + do_write (esc, n_read); + buf += n_read; + } + + /* If there is any data remaining in BUF, we can flush it now. */ + if (*buf != '\0') + do_puts (buf); +} + +/* See ui-file.h. */ + +void +no_terminal_escape_file::do_puts (const char *buf) { while (*buf != '\0') { @@ -438,6 +491,13 @@ no_terminal_escape_file::puts (const char *buf) } void +no_terminal_escape_file::do_write (const char *buf, long len) +{ + std::string copy (buf, len); + do_puts (copy.c_str ()); +} + +void timestamped_file::write (const char *buf, long len) { if (debug_timestamp) diff --git a/gdb/ui-file.h b/gdb/ui-file.h index 3919e52..1219bde 100644 --- a/gdb/ui-file.h +++ b/gdb/ui-file.h @@ -362,24 +362,58 @@ private: ui_file *m_two; }; +/* A ui_file implementation that buffers terminal escape sequences. + Note that this does not buffer in general -- it only buffers when + an incomplete but potentially recognizable escape sequence is + started. */ + +class escape_buffering_file : public stdio_file +{ +public: + using stdio_file::stdio_file; + + /* Like the stdio_file methods but these forward to do_write and + do_puts, respectively. */ + void write (const char *buf, long length_buf) override final; + void puts (const char *linebuffer) override final; + + /* This class does not override 'flush'. While it does have an + internal buffer, it does not really make sense to flush the + buffer until an escape sequence has been fully processed. */ + +protected: + + /* Called to output some text. If the text contains a recognizable + terminal escape sequence, then it is guaranteed to be complete. + "Recognizable" here means that examine_ansi_escape did not return + INCOMPLETE. */ + virtual void do_puts (const char *buf) = 0; + virtual void do_write (const char *buf, long len) = 0; + +private: + + /* Buffer used only for incomplete escape sequences. */ + std::string m_buffer; +}; + /* A ui_file implementation that filters out terminal escape sequences. */ -class no_terminal_escape_file : public stdio_file +class no_terminal_escape_file : public escape_buffering_file { public: no_terminal_escape_file () { } - /* Like the stdio_file methods, but these filter out terminal escape - sequences. */ - void write (const char *buf, long length_buf) override; - void puts (const char *linebuffer) override; - void emit_style_escape (const ui_file_style &style) override { } + +protected: + + void do_puts (const char *linebuffer) override; + void do_write (const char *buf, long len) override; }; /* A base class for ui_file types that wrap another ui_file. */ diff --git a/gdb/ui-style.c b/gdb/ui-style.c index b8d73ab..9a58e4d 100644 --- a/gdb/ui-style.c +++ b/gdb/ui-style.c @@ -21,12 +21,14 @@ #include "gdbsupport/gdb_regex.h" /* A regular expression that is used for matching ANSI terminal escape - sequences. */ + sequences. Note that this will actually match any prefix of such a + sequence. This property is used so that other code can buffer + incomplete sequences as needed. */ static const char ansi_regex_text[] = - /* Introduction. */ - "^\033\\[" -#define DATA_SUBEXP 1 + /* Introduction. Only the escape character is truly required. */ + "^\033(\\[" +#define DATA_SUBEXP 2 /* Capture parameter and intermediate bytes. */ "(" /* Parameter bytes. */ @@ -36,12 +38,12 @@ static const char ansi_regex_text[] = /* End the first capture. */ ")" /* The final byte. */ -#define FINAL_SUBEXP 2 - "([\x40-\x7e])"; +#define FINAL_SUBEXP 3 + "([\x40-\x7e]))?"; /* The number of subexpressions to allocate space for, including the "0th" whole match subexpression. */ -#define NUM_SUBEXPRESSIONS 3 +#define NUM_SUBEXPRESSIONS 4 /* The compiled form of ansi_regex_text. */ @@ -288,6 +290,16 @@ ui_file_style::to_ansi () const else result.append (std::to_string (m_intensity)); result.push_back (';'); + if (m_italic) + result.append ("3"); + else + result.append ("23"); + result.push_back (';'); + if (m_underline) + result.append ("4"); + else + result.append ("24"); + result.push_back (';'); if (m_reverse) result.push_back ('7'); else @@ -371,6 +383,15 @@ ui_file_style::parse (const char *buf, size_t *n_read) *n_read = 0; return false; } + + /* If the final subexpression did not match, then that means there + was an incomplete sequence. These are ignored here. */ + if (subexps[FINAL_SUBEXP].rm_so == -1) + { + *n_read = 0; + return false; + } + /* Other failures mean the regexp is broken. */ gdb_assert (match == 0); /* The regexp is anchored. */ @@ -424,6 +445,14 @@ ui_file_style::parse (const char *buf, size_t *n_read) /* Dim. */ m_intensity = DIM; break; + case 3: + /* Italic. */ + m_italic = true; + break; + case 4: + /* Underline. */ + m_underline = true; + break; case 7: /* Reverse. */ m_reverse = true; @@ -435,6 +464,14 @@ ui_file_style::parse (const char *buf, size_t *n_read) /* Normal. */ m_intensity = NORMAL; break; + case 23: + /* Non-italic. */ + m_italic = false; + break; + case 24: + /* Non-underline. */ + m_underline = false; + break; case 27: /* Inverse off. */ m_reverse = false; @@ -527,17 +564,25 @@ ui_file_style::parse (const char *buf, size_t *n_read) /* See ui-style.h. */ -bool -skip_ansi_escape (const char *buf, int *n_read) +ansi_escape_result +examine_ansi_escape (const char *buf, int *n_read) { + gdb_assert (*buf == '\033'); + regmatch_t subexps[NUM_SUBEXPRESSIONS]; int match = ansi_regex.exec (buf, ARRAY_SIZE (subexps), subexps, 0); - if (match == REG_NOMATCH || buf[subexps[FINAL_SUBEXP].rm_so] != 'm') - return false; + if (match == REG_NOMATCH) + return ansi_escape_result::NO_MATCH; + + if (subexps[FINAL_SUBEXP].rm_so == -1) + return ansi_escape_result::INCOMPLETE; + + if (buf[subexps[FINAL_SUBEXP].rm_so] != 'm') + return ansi_escape_result::NO_MATCH; *n_read = subexps[FINAL_SUBEXP].rm_eo; - return true; + return ansi_escape_result::MATCHED; } /* See ui-style.h. */ diff --git a/gdb/ui-style.h b/gdb/ui-style.h index 77a175d..1ea3556 100644 --- a/gdb/ui-style.h +++ b/gdb/ui-style.h @@ -266,7 +266,9 @@ struct ui_file_style return (m_foreground == other.m_foreground && m_background == other.m_background && m_intensity == other.m_intensity - && m_reverse == other.m_reverse); + && m_reverse == other.m_reverse + && m_italic == other.m_italic + && m_underline == other.m_underline); } bool operator!= (const ui_file_style &other) const @@ -284,7 +286,9 @@ struct ui_file_style return (m_foreground == NONE && m_background == NONE && m_intensity == NORMAL - && !m_reverse); + && !m_reverse + && !m_italic + && !m_underline); } /* Return true if this style specified reverse display; false @@ -330,6 +334,32 @@ struct ui_file_style return m_intensity; } + /* Return true if this style specified italic display; false + otherwise. */ + bool is_italic () const + { + return m_italic; + } + + /* Set/clear the italic display flag. */ + void set_italic (bool italic) + { + m_italic = italic; + } + + /* Return true if this style specified underline display; false + otherwise. */ + bool is_underline () const + { + return m_underline; + } + + /* Set/clear the underline display flag. */ + void set_underline (bool underline) + { + m_underline = underline; + } + /* Parse an ANSI escape sequence in BUF, modifying this style. BUF must begin with an ESC character. Return true if an escape sequence was successfully parsed; false otherwise. In either @@ -351,14 +381,40 @@ private: color m_foreground = NONE; color m_background = NONE; intensity m_intensity = NORMAL; + bool m_italic = false; + bool m_underline = false; bool m_reverse = false; }; +/* Possible results for checking an ANSI escape sequence. */ +enum class ansi_escape_result +{ + /* The escape sequence is definitely not recognizable. */ + NO_MATCH, + + /* The escape sequence might be recognizable with more input. */ + INCOMPLETE, + + /* The escape sequence is definitely recognizable. */ + MATCHED, +}; + +/* Examine an ANSI escape sequence in BUF. BUF must begin with an ESC + character. Return a value indicating whether the sequence was + recognizable. If MATCHED is returned, then N_READ is updated to + reflect the number of chars read from BUF. */ + +extern ansi_escape_result examine_ansi_escape (const char *buf, int *n_read); + /* Skip an ANSI escape sequence in BUF. BUF must begin with an ESC character. Return true if an escape sequence was successfully skipped; false otherwise. If an escape sequence was skipped, N_READ is updated to reflect the number of chars read from BUF. */ -extern bool skip_ansi_escape (const char *buf, int *n_read); +static inline bool +skip_ansi_escape (const char *buf, int *n_read) +{ + return examine_ansi_escape (buf, n_read) == ansi_escape_result::MATCHED; +} #endif /* GDB_UI_STYLE_H */ @@ -237,9 +237,7 @@ new_ui_command (const char *args, int from_tty) gdb_printf ("New UI allocated\n"); } -void _initialize_ui (); -void -_initialize_ui () +INIT_GDB_FILE (ui) { cmd_list_element *c = add_cmd ("new-ui", class_support, new_ui_command, _("\ Create a new UI.\n\ diff --git a/gdb/unittests/array-view-selftests.c b/gdb/unittests/array-view-selftests.c index fa96d3b..914800a 100644 --- a/gdb/unittests/array-view-selftests.c +++ b/gdb/unittests/array-view-selftests.c @@ -695,9 +695,7 @@ run_copy_tests () } /* namespace array_view_tests */ } /* namespace selftests */ -void _initialize_array_view_selftests (); -void -_initialize_array_view_selftests () +INIT_GDB_FILE (array_view_selftests) { selftests::register_test ("array_view", selftests::array_view_tests::run_tests); diff --git a/gdb/unittests/child-path-selftests.c b/gdb/unittests/child-path-selftests.c index 0f29f7d..95b2c34 100644 --- a/gdb/unittests/child-path-selftests.c +++ b/gdb/unittests/child-path-selftests.c @@ -58,9 +58,7 @@ test () } } -void _initialize_child_path_selftests (); -void -_initialize_child_path_selftests () +INIT_GDB_FILE (child_path_selftests) { selftests::register_test ("child_path", selftests::child_path::test); diff --git a/gdb/unittests/cli-utils-selftests.c b/gdb/unittests/cli-utils-selftests.c index e6c64a9..1382ca6 100644 --- a/gdb/unittests/cli-utils-selftests.c +++ b/gdb/unittests/cli-utils-selftests.c @@ -109,9 +109,7 @@ test_cli_utils () } } -void _initialize_cli_utils_selftests (); -void -_initialize_cli_utils_selftests () +INIT_GDB_FILE (cli_utils_selftests) { selftests::register_test ("cli_utils", selftests::cli_utils::test_cli_utils); diff --git a/gdb/unittests/command-def-selftests.c b/gdb/unittests/command-def-selftests.c index 6f169f5..0a54d31 100644 --- a/gdb/unittests/command-def-selftests.c +++ b/gdb/unittests/command-def-selftests.c @@ -219,9 +219,7 @@ command_structure_invariants_tests () } /* namespace selftests */ -void _initialize_command_def_selftests (); -void -_initialize_command_def_selftests () +INIT_GDB_FILE (command_def_selftests) { selftests::register_test ("help_doc_invariants", diff --git a/gdb/unittests/common-utils-selftests.c b/gdb/unittests/common-utils-selftests.c index fab9cd1..ecc4769 100644 --- a/gdb/unittests/common-utils-selftests.c +++ b/gdb/unittests/common-utils-selftests.c @@ -127,9 +127,7 @@ string_vappendf_tests () } /* namespace selftests */ -void _initialize_common_utils_selftests (); -void -_initialize_common_utils_selftests () +INIT_GDB_FILE (common_utils_selftests) { selftests::register_test ("string_printf", selftests::string_printf_tests); selftests::register_test ("string_vprintf", selftests::string_vprintf_tests); diff --git a/gdb/unittests/copy_bitwise-selftests.c b/gdb/unittests/copy_bitwise-selftests.c index 8798cbd..6fcdcd7 100644 --- a/gdb/unittests/copy_bitwise-selftests.c +++ b/gdb/unittests/copy_bitwise-selftests.c @@ -151,9 +151,7 @@ copy_bitwise_tests (void) } /* namespace selftests */ -void _initialize_copy_bitwise_utils_selftests (); -void -_initialize_copy_bitwise_utils_selftests () +INIT_GDB_FILE (copy_bitwise_utils_selftests) { selftests::register_test ("copy_bitwise", selftests::copy_bitwise_tests); } diff --git a/gdb/unittests/enum-flags-selftests.c b/gdb/unittests/enum-flags-selftests.c index bb55019..3eb0f52 100644 --- a/gdb/unittests/enum-flags-selftests.c +++ b/gdb/unittests/enum-flags-selftests.c @@ -607,10 +607,7 @@ self_test () } /* namespace enum_flags_tests */ } /* namespace selftests */ -void _initialize_enum_flags_selftests (); - -void -_initialize_enum_flags_selftests () +INIT_GDB_FILE (enum_flags_selftests) { selftests::register_test ("enum-flags", selftests::enum_flags_tests::self_test); diff --git a/gdb/unittests/environ-selftests.c b/gdb/unittests/environ-selftests.c index 79bffed..5ac3384 100644 --- a/gdb/unittests/environ-selftests.c +++ b/gdb/unittests/environ-selftests.c @@ -297,9 +297,7 @@ run_tests () } /* namespace gdb_environ */ } /* namespace selftests */ -void _initialize_environ_selftests (); -void -_initialize_environ_selftests () +INIT_GDB_FILE (environ_selftests) { selftests::register_test ("gdb_environ", selftests::gdb_environ_tests::run_tests); diff --git a/gdb/unittests/filtered_iterator-selftests.c b/gdb/unittests/filtered_iterator-selftests.c index b3ec70b..49c95cb 100644 --- a/gdb/unittests/filtered_iterator-selftests.c +++ b/gdb/unittests/filtered_iterator-selftests.c @@ -154,9 +154,7 @@ test_filtered_iterator_eq () } /* namespace selftests */ -void _initialize_filtered_iterator_selftests (); -void -_initialize_filtered_iterator_selftests () +INIT_GDB_FILE (filtered_iterator_selftests) { selftests::register_test ("filtered_iterator", selftests::test_filtered_iterator); diff --git a/gdb/unittests/format_pieces-selftests.c b/gdb/unittests/format_pieces-selftests.c index 473d690..c7d8ff0 100644 --- a/gdb/unittests/format_pieces-selftests.c +++ b/gdb/unittests/format_pieces-selftests.c @@ -147,9 +147,7 @@ run_tests () } /* namespace format_pieces */ } /* namespace selftests */ -void _initialize_format_pieces_selftests (); -void -_initialize_format_pieces_selftests () +INIT_GDB_FILE (format_pieces_selftests) { selftests::register_test ("format_pieces", selftests::format_pieces::run_tests); diff --git a/gdb/unittests/frame_info_ptr-selftests.c b/gdb/unittests/frame_info_ptr-selftests.c index c9eb4f4..d518482 100644 --- a/gdb/unittests/frame_info_ptr-selftests.c +++ b/gdb/unittests/frame_info_ptr-selftests.c @@ -66,9 +66,7 @@ test_user_created_frame () } /* namespace selftests */ -void _initialize_frame_info_ptr_selftests (); -void -_initialize_frame_info_ptr_selftests () +INIT_GDB_FILE (frame_info_ptr_selftests) { selftests::register_test ("frame_info_ptr_user", selftests::test_user_created_frame); diff --git a/gdb/unittests/function-view-selftests.c b/gdb/unittests/function-view-selftests.c index 036c7f9..21838f1 100644 --- a/gdb/unittests/function-view-selftests.c +++ b/gdb/unittests/function-view-selftests.c @@ -250,9 +250,7 @@ run_tests () } /* namespace function_view */ } /* namespace selftests */ -void _initialize_function_view_selftests (); -void -_initialize_function_view_selftests () +INIT_GDB_FILE (function_view_selftests) { selftests::register_test ("function_view", selftests::function_view::run_tests); diff --git a/gdb/unittests/gdb_tilde_expand-selftests.c b/gdb/unittests/gdb_tilde_expand-selftests.c index b0b7027..28c759f 100644 --- a/gdb/unittests/gdb_tilde_expand-selftests.c +++ b/gdb/unittests/gdb_tilde_expand-selftests.c @@ -84,9 +84,7 @@ do_test () } /* namespace gdb_tilde_expand_tests */ } /* namespace selftests */ -void _initialize_gdb_tilde_expand_selftests (); -void -_initialize_gdb_tilde_expand_selftests () +INIT_GDB_FILE (gdb_tilde_expand_selftests) { selftests::register_test ("gdb_tilde_expand", selftests::gdb_tilde_expand_tests::do_test); diff --git a/gdb/unittests/gmp-utils-selftests.c b/gdb/unittests/gmp-utils-selftests.c index 495947af..9843fcb 100644 --- a/gdb/unittests/gmp-utils-selftests.c +++ b/gdb/unittests/gmp-utils-selftests.c @@ -498,10 +498,7 @@ gdb_mpq_write_fixed_point () } -void _initialize_gmp_utils_selftests (); - -void -_initialize_gmp_utils_selftests () +INIT_GDB_FILE (gmp_utils_selftests) { selftests::register_test ("gdb_mpz_as_integer", selftests::gdb_mpz_as_integer); diff --git a/gdb/unittests/intrusive_list-selftests.c b/gdb/unittests/intrusive_list-selftests.c index eaffbba..2dd1298 100644 --- a/gdb/unittests/intrusive_list-selftests.c +++ b/gdb/unittests/intrusive_list-selftests.c @@ -1648,10 +1648,7 @@ test_intrusive_list () test_node_is_linked (); } -void _initialize_intrusive_list_selftests (); - -void -_initialize_intrusive_list_selftests () +INIT_GDB_FILE (intrusive_list_selftests) { selftests::register_test ("intrusive_list", test_intrusive_list); } diff --git a/gdb/unittests/lookup_name_info-selftests.c b/gdb/unittests/lookup_name_info-selftests.c index 3e8440b..dc0d307 100644 --- a/gdb/unittests/lookup_name_info-selftests.c +++ b/gdb/unittests/lookup_name_info-selftests.c @@ -105,9 +105,7 @@ run_tests () }} /* namespace selftests::lookup_name */ -void _initialize_lookup_name_info_selftests (); -void -_initialize_lookup_name_info_selftests () +INIT_GDB_FILE (lookup_name_info_selftests) { selftests::register_test ("lookup_name_info", selftests::lookup_name::run_tests); diff --git a/gdb/unittests/main-thread-selftests.c b/gdb/unittests/main-thread-selftests.c index 5f3d790..77adf47 100644 --- a/gdb/unittests/main-thread-selftests.c +++ b/gdb/unittests/main-thread-selftests.c @@ -73,9 +73,7 @@ run_tests () } } -void _initialize_main_thread_selftests (); -void -_initialize_main_thread_selftests () +INIT_GDB_FILE (main_thread_selftests) { #if CXX_STD_THREAD selftests::register_test ("run_on_main_thread", diff --git a/gdb/unittests/memory-map-selftests.c b/gdb/unittests/memory-map-selftests.c index 6872d5a..c014c4d 100644 --- a/gdb/unittests/memory-map-selftests.c +++ b/gdb/unittests/memory-map-selftests.c @@ -75,9 +75,7 @@ parse_memory_map_tests () #endif /* HAVE_LIBEXPAT */ -void _initialize_memory_map_selftests (); -void -_initialize_memory_map_selftests () +INIT_GDB_FILE (memory_map_selftests) { #if defined(HAVE_LIBEXPAT) selftests::register_test diff --git a/gdb/unittests/memrange-selftests.c b/gdb/unittests/memrange-selftests.c index 1433105..17e08e8 100644 --- a/gdb/unittests/memrange-selftests.c +++ b/gdb/unittests/memrange-selftests.c @@ -105,9 +105,7 @@ normalize_mem_ranges_tests () } /* namespace memrange_tests */ } /* namespace selftests */ -void _initialize_memrange_selftests (); -void -_initialize_memrange_selftests () +INIT_GDB_FILE (memrange_selftests) { selftests::register_test ("normalize_mem_ranges", diff --git a/gdb/unittests/mkdir-recursive-selftests.c b/gdb/unittests/mkdir-recursive-selftests.c index 764fe1a..b2ae383 100644 --- a/gdb/unittests/mkdir-recursive-selftests.c +++ b/gdb/unittests/mkdir-recursive-selftests.c @@ -80,9 +80,7 @@ test () } } -void _initialize_mkdir_recursive_selftests (); -void -_initialize_mkdir_recursive_selftests () +INIT_GDB_FILE (mkdir_recursive_selftests) { selftests::register_test ("mkdir_recursive", selftests::mkdir_recursive::test); diff --git a/gdb/unittests/observable-selftests.c b/gdb/unittests/observable-selftests.c index 90d7392..0934249 100644 --- a/gdb/unittests/observable-selftests.c +++ b/gdb/unittests/observable-selftests.c @@ -237,9 +237,7 @@ run_tests () } /* namespace observers */ } /* namespace selftests */ -void _initialize_observer_selftest (); -void -_initialize_observer_selftest () +INIT_GDB_FILE (observer_selftest) { selftests::register_test ("gdb::observers", selftests::observers::run_tests); diff --git a/gdb/unittests/offset-type-selftests.c b/gdb/unittests/offset-type-selftests.c index 1623f0d..2cba4e1 100644 --- a/gdb/unittests/offset-type-selftests.c +++ b/gdb/unittests/offset-type-selftests.c @@ -170,9 +170,7 @@ run_tests () } /* namespace offset_type */ } /* namespace selftests */ -void _initialize_offset_type_selftests (); -void -_initialize_offset_type_selftests () +INIT_GDB_FILE (offset_type_selftests) { selftests::register_test ("offset_type", selftests::offset_type::run_tests); } diff --git a/gdb/unittests/packed-selftests.c b/gdb/unittests/packed-selftests.c index daa8036..5a91b29 100644 --- a/gdb/unittests/packed-selftests.c +++ b/gdb/unittests/packed-selftests.c @@ -119,9 +119,7 @@ run_tests () } /* namespace packed_tests */ } /* namespace selftests */ -void _initialize_packed_selftests (); -void -_initialize_packed_selftests () +INIT_GDB_FILE (packed_selftests) { selftests::register_test ("packed", selftests::packed_tests::run_tests); } diff --git a/gdb/unittests/parallel-for-selftests.c b/gdb/unittests/parallel-for-selftests.c index 841d914..f545614 100644 --- a/gdb/unittests/parallel-for-selftests.c +++ b/gdb/unittests/parallel-for-selftests.c @@ -17,13 +17,6 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/* This file is divided in two parts: - - FOR_EACH-undefined, and - - FOR_EACH-defined. - The former includes the latter, more than once, with different values for - FOR_EACH. The FOR_EACH-defined part reads like a regular function. */ -#ifndef FOR_EACH - #include "gdbsupport/selftest.h" #include "gdbsupport/parallel-for.h" @@ -49,97 +42,77 @@ struct save_restore_n_threads int n_threads; }; -/* Define test_par using TEST in the FOR_EACH-defined part. */ -#define TEST test_par -#define FOR_EACH gdb::parallel_for_each -#include "parallel-for-selftests.c" -#undef FOR_EACH -#undef TEST - -/* Define test_seq using TEST in the FOR_EACH-defined part. */ -#define TEST test_seq -#define FOR_EACH gdb::sequential_for_each -#include "parallel-for-selftests.c" -#undef FOR_EACH -#undef TEST +using foreach_callback_t = gdb::function_view<void (int first, int last)>; +using do_foreach_t = gdb::function_view<void (int first, int last, + foreach_callback_t)>; static void -test (int n_threads) +test_one (int n_threads, do_foreach_t do_foreach) { - test_par (n_threads); - test_seq (n_threads); + save_restore_n_threads saver; + gdb::thread_pool::g_thread_pool->set_thread_count (n_threads); + + { + constexpr int upper_bound = 1000; + std::atomic<int> counter (0); + do_foreach (0, upper_bound, + [&] (int start, int end) { counter += end - start; }); + SELF_CHECK (counter == upper_bound); + } + + { + std::atomic<int> counter (0); + do_foreach (0, 0, [&] (int start, int end) { counter += end - start; }); + SELF_CHECK (counter == 0); + } + + { + /* Check that if there are fewer tasks than threads, then we won't + end up with a null result. */ + std::vector<std::unique_ptr<int>> intresults; + std::atomic<bool> any_empty_tasks (false); + + do_foreach (0, 1, + [&] (int start, int end) + { + if (start == end) + any_empty_tasks = true; + + return std::make_unique<int> (end - start); + }); + + SELF_CHECK (!any_empty_tasks); + SELF_CHECK (std::all_of (intresults.begin (), intresults.end (), + [] (const std::unique_ptr<int> &entry) + { return entry != nullptr; })); + } } static void -test_n_threads () +test_parallel_for_each () { - test (0); - test (1); - test (3); + const std::vector<do_foreach_t> for_each_functions + { + [] (int start, int end, foreach_callback_t callback) + { gdb::parallel_for_each<1> (start, end, callback); }, + [] (int start, int end, foreach_callback_t callback) + { gdb::sequential_for_each (start, end, callback);} + }; + + for (int n_threads : { 0, 1, 3 }) + for (const auto &for_each_function : for_each_functions) + test_one (n_threads, for_each_function); } -} -} +} /* namespace parallel_for */ +} /* namespace selftests */ #endif /* CXX_STD_THREAD */ -void _initialize_parallel_for_selftests (); -void -_initialize_parallel_for_selftests () +INIT_GDB_FILE (parallel_for_selftests) { #ifdef CXX_STD_THREAD selftests::register_test ("parallel_for", - selftests::parallel_for::test_n_threads); + selftests::parallel_for::test_parallel_for_each); #endif /* CXX_STD_THREAD */ } - -#else /* FOR_EACH */ - -static void -TEST (int n_threads) -{ - save_restore_n_threads saver; - gdb::thread_pool::g_thread_pool->set_thread_count (n_threads); - -#define NUMBER 10000 - - std::atomic<int> counter (0); - FOR_EACH (1, 0, NUMBER, - [&] (int start, int end) - { - counter += end - start; - }); - SELF_CHECK (counter == NUMBER); - - counter = 0; - FOR_EACH (1, 0, 0, - [&] (int start, int end) - { - counter += end - start; - }); - SELF_CHECK (counter == 0); - -#undef NUMBER - - /* Check that if there are fewer tasks than threads, then we won't - end up with a null result. */ - std::vector<std::unique_ptr<int>> intresults; - std::atomic<bool> any_empty_tasks (false); - - FOR_EACH (1, 0, 1, - [&] (int start, int end) - { - if (start == end) - any_empty_tasks = true; - return std::make_unique<int> (end - start); - }); - SELF_CHECK (!any_empty_tasks); - SELF_CHECK (std::all_of (intresults.begin (), - intresults.end (), - [] (const std::unique_ptr<int> &entry) - { - return entry != nullptr; - })); -} - -#endif /* FOR_EACH */ diff --git a/gdb/unittests/parse-connection-spec-selftests.c b/gdb/unittests/parse-connection-spec-selftests.c index 7104272..ce2da35 100644 --- a/gdb/unittests/parse-connection-spec-selftests.c +++ b/gdb/unittests/parse-connection-spec-selftests.c @@ -238,9 +238,7 @@ run_tests () } /* namespace parse_connection_spec_tests */ } /* namespace selftests */ -void _initialize_parse_connection_spec_selftests (); -void -_initialize_parse_connection_spec_selftests () +INIT_GDB_FILE (parse_connection_spec_selftests) { selftests::register_test ("parse_connection_spec", selftests::parse_connection_spec_tests::run_tests); diff --git a/gdb/unittests/path-join-selftests.c b/gdb/unittests/path-join-selftests.c index a4003f0..8bc5a91 100644 --- a/gdb/unittests/path-join-selftests.c +++ b/gdb/unittests/path-join-selftests.c @@ -63,9 +63,7 @@ test () } } -void _initialize_path_join_selftests (); -void -_initialize_path_join_selftests () +INIT_GDB_FILE (path_join_selftests) { selftests::register_test ("path_join", selftests::path_join::test); diff --git a/gdb/unittests/remote-arg-selftests.c b/gdb/unittests/remote-arg-selftests.c index 70f8a39..17b8d1d 100644 --- a/gdb/unittests/remote-arg-selftests.c +++ b/gdb/unittests/remote-arg-selftests.c @@ -156,10 +156,7 @@ self_test () } /* namespace remote_args_tests */ } /* namespace selftests */ -void _initialize_remote_arg_selftests (); - -void -_initialize_remote_arg_selftests () +INIT_GDB_FILE (remote_arg_selftests) { selftests::register_test ("remote-args", selftests::remote_args_tests::self_test); diff --git a/gdb/unittests/rsp-low-selftests.c b/gdb/unittests/rsp-low-selftests.c index 7a1b2de..d0002ae 100644 --- a/gdb/unittests/rsp-low-selftests.c +++ b/gdb/unittests/rsp-low-selftests.c @@ -60,9 +60,7 @@ static void test_hex2str () } /* namespace rsp_low */ } /* namespace selftests */ -void _initialize_rsp_low_selftests (); -void -_initialize_rsp_low_selftests () +INIT_GDB_FILE (rsp_low_selftests) { selftests::register_test ("hex2bin_byte_vector", selftests::rsp_low::test_hex2bin_byte_vector); diff --git a/gdb/unittests/scoped_fd-selftests.c b/gdb/unittests/scoped_fd-selftests.c index 7abbbd8..da59a18 100644 --- a/gdb/unittests/scoped_fd-selftests.c +++ b/gdb/unittests/scoped_fd-selftests.c @@ -92,9 +92,7 @@ run_tests () } /* namespace scoped_fd */ } /* namespace selftests */ -void _initialize_scoped_fd_selftests (); -void -_initialize_scoped_fd_selftests () +INIT_GDB_FILE (scoped_fd_selftests) { selftests::register_test ("scoped_fd", selftests::scoped_fd::run_tests); diff --git a/gdb/unittests/scoped_ignore_signal-selftests.c b/gdb/unittests/scoped_ignore_signal-selftests.c index fdfaca3..86c5031 100644 --- a/gdb/unittests/scoped_ignore_signal-selftests.c +++ b/gdb/unittests/scoped_ignore_signal-selftests.c @@ -114,9 +114,7 @@ test_sigpipe () } /* namespace scoped_ignore_sig */ } /* namespace selftests */ -void _initialize_scoped_ignore_signal_selftests (); -void -_initialize_scoped_ignore_signal_selftests () +INIT_GDB_FILE (scoped_ignore_signal_selftests) { #ifdef SIGPIPE selftests::register_test ("scoped_ignore_sigpipe", diff --git a/gdb/unittests/scoped_mmap-selftests.c b/gdb/unittests/scoped_mmap-selftests.c index 695ed1e..f752b9a 100644 --- a/gdb/unittests/scoped_mmap-selftests.c +++ b/gdb/unittests/scoped_mmap-selftests.c @@ -41,7 +41,7 @@ test_destroy () errno = 0; { ::scoped_mmap smmap (nullptr, sysconf (_SC_PAGESIZE), PROT_WRITE, - MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); + MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); mem = smmap.get (); SELF_CHECK (mem != nullptr); @@ -59,7 +59,7 @@ test_release () errno = 0; { ::scoped_mmap smmap (nullptr, sysconf (_SC_PAGESIZE), PROT_WRITE, - MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); + MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); mem = smmap.release (); SELF_CHECK (mem != nullptr); @@ -135,9 +135,7 @@ run_tests () #endif /* !defined(HAVE_SYS_MMAN_H) */ -void _initialize_scoped_mmap_selftests (); -void -_initialize_scoped_mmap_selftests () +INIT_GDB_FILE (scoped_mmap_selftests) { #if defined(HAVE_SYS_MMAN_H) selftests::register_test ("scoped_mmap", diff --git a/gdb/unittests/scoped_restore-selftests.c b/gdb/unittests/scoped_restore-selftests.c index 18d898b..4396046 100644 --- a/gdb/unittests/scoped_restore-selftests.c +++ b/gdb/unittests/scoped_restore-selftests.c @@ -102,9 +102,7 @@ run_tests () } /* namespace scoped_restore_tests */ } /* namespace selftests */ -void _initialize_scoped_restore_selftests (); -void -_initialize_scoped_restore_selftests () +INIT_GDB_FILE (scoped_restore_selftests) { selftests::register_test ("scoped_restore", selftests::scoped_restore_tests::run_tests); diff --git a/gdb/unittests/search-memory-selftests.c b/gdb/unittests/search-memory-selftests.c index 0e82d6c..c1942fc 100644 --- a/gdb/unittests/search-memory-selftests.c +++ b/gdb/unittests/search-memory-selftests.c @@ -89,9 +89,7 @@ run_tests () } /* namespace selftests */ -void _initialize_search_memory_selftests (); -void -_initialize_search_memory_selftests () +INIT_GDB_FILE (search_memory_selftests) { selftests::register_test ("search_memory", selftests::search_memory_tests::run_tests); diff --git a/gdb/unittests/style-selftests.c b/gdb/unittests/style-selftests.c index 2cbe194..7cb42a1 100644 --- a/gdb/unittests/style-selftests.c +++ b/gdb/unittests/style-selftests.c @@ -38,6 +38,8 @@ run_tests () SELF_CHECK (style.get_foreground ().is_none ()); SELF_CHECK (style.get_background ().is_none ()); SELF_CHECK (style.get_intensity () == ui_file_style::NORMAL); + SELF_CHECK (!style.is_italic ()); + SELF_CHECK (!style.is_underline ()); SELF_CHECK (!style.is_reverse ()); SELF_CHECK (style.to_ansi () == "\033[m"); @@ -47,6 +49,8 @@ run_tests () SELF_CHECK (style.get_foreground ().is_none ()); SELF_CHECK (style.get_background ().is_none ()); SELF_CHECK (style.get_intensity () == ui_file_style::NORMAL); + SELF_CHECK (!style.is_italic ()); + SELF_CHECK (!style.is_underline ()); SELF_CHECK (!style.is_reverse ()); /* This particular case does not round-trip identically, but the difference is unimportant. */ @@ -57,8 +61,10 @@ run_tests () SELF_CHECK (style.get_foreground ().is_none ()); SELF_CHECK (style.get_background ().is_none ()); SELF_CHECK (style.get_intensity () == ui_file_style::NORMAL); + SELF_CHECK (!style.is_italic ()); + SELF_CHECK (!style.is_underline ()); SELF_CHECK (style.is_reverse ()); - SELF_CHECK (style.to_ansi () == "\033[39;49;22;7m"); + SELF_CHECK (style.to_ansi () == "\033[39;49;22;23;24;7m"); style = ui_file_style (); SELF_CHECK (style.parse ("\033[32;1m", &n_read)); @@ -67,8 +73,22 @@ run_tests () SELF_CHECK (style.get_foreground ().get_value () == ui_file_style::GREEN); SELF_CHECK (style.get_background ().is_none ()); SELF_CHECK (style.get_intensity () == ui_file_style::BOLD); + SELF_CHECK (!style.is_italic ()); + SELF_CHECK (!style.is_underline ()); SELF_CHECK (!style.is_reverse ()); - SELF_CHECK (style.to_ansi () == "\033[32;49;1;27m"); + SELF_CHECK (style.to_ansi () == "\033[32;49;1;23;24;27m"); + + style = ui_file_style (); + SELF_CHECK (style.parse ("\033[32;2;3;4m", &n_read)); + SELF_CHECK (n_read == 11); + SELF_CHECK (style.get_foreground ().is_basic ()); + SELF_CHECK (style.get_foreground ().get_value () == ui_file_style::GREEN); + SELF_CHECK (style.get_background ().is_none ()); + SELF_CHECK (style.get_intensity () == ui_file_style::DIM); + SELF_CHECK (style.is_italic ()); + SELF_CHECK (style.is_underline ()); + SELF_CHECK (!style.is_reverse ()); + SELF_CHECK (style.to_ansi () == "\033[32;49;2;3;4;27m"); style = ui_file_style (); SELF_CHECK (style.parse ("\033[38;5;112;48;5;249m", &n_read)); @@ -80,8 +100,10 @@ run_tests () style.get_background ().get_rgb (rgb); CHECK_RGB (0xb2, 0xb2, 0xb2); SELF_CHECK (style.get_intensity () == ui_file_style::NORMAL); + SELF_CHECK (!style.is_italic ()); + SELF_CHECK (!style.is_underline ()); SELF_CHECK (!style.is_reverse ()); - SELF_CHECK (style.to_ansi () == "\033[38;5;112;48;5;249;22;27m"); + SELF_CHECK (style.to_ansi () == "\033[38;5;112;48;5;249;22;23;24;27m"); style = ui_file_style (); SELF_CHECK (style.parse ("\033[38;2;83;84;85;48;2;0;1;254;2;7m", &n_read)); @@ -93,16 +115,16 @@ run_tests () style.get_background ().get_rgb (rgb); CHECK_RGB (0, 1, 254); SELF_CHECK (style.get_intensity () == ui_file_style::DIM); + SELF_CHECK (!style.is_italic ()); + SELF_CHECK (!style.is_underline ()); SELF_CHECK (style.is_reverse ()); - SELF_CHECK (style.to_ansi () == "\033[38;2;83;84;85;48;2;0;1;254;2;7m"); + SELF_CHECK (style.to_ansi () == "\033[38;2;83;84;85;48;2;0;1;254;2;23;24;7m"); } } /* namespace style */ } /* namespace selftests */ -void _initialize_style_selftest (); -void -_initialize_style_selftest () +INIT_GDB_FILE (style_selftest) { selftests::register_test ("style", selftests::style::run_tests); diff --git a/gdb/unittests/tracepoint-selftests.c b/gdb/unittests/tracepoint-selftests.c index 235dd1e..bef51ae 100644 --- a/gdb/unittests/tracepoint-selftests.c +++ b/gdb/unittests/tracepoint-selftests.c @@ -60,9 +60,7 @@ test_parse_static_tracepoint_marker_definition () } /* namespace tracepoint_tests */ } /* namespace selftests */ -void _initialize_tracepoint_selftests (); -void -_initialize_tracepoint_selftests () +INIT_GDB_FILE (tracepoint_selftests) { selftests::register_test ("parse_static_tracepoint_marker_definition", diff --git a/gdb/unittests/tui-selftests.c b/gdb/unittests/tui-selftests.c index e61b0db..5235a07 100644 --- a/gdb/unittests/tui-selftests.c +++ b/gdb/unittests/tui-selftests.c @@ -45,9 +45,7 @@ run_tests () #endif /* TUI */ -void _initialize_tui_selftest (); -void -_initialize_tui_selftest () +INIT_GDB_FILE (tui_selftest) { #ifdef TUI selftests::register_test ("tui", selftests::tui::run_tests); diff --git a/gdb/unittests/ui-file-selftests.c b/gdb/unittests/ui-file-selftests.c index b62fd4f..d78c6b0 100644 --- a/gdb/unittests/ui-file-selftests.c +++ b/gdb/unittests/ui-file-selftests.c @@ -53,9 +53,7 @@ run_tests () } /* namespace file*/ } /* namespace selftests */ -void _initialize_ui_file_selftest (); -void -_initialize_ui_file_selftest () +INIT_GDB_FILE (ui_file_selftest) { selftests::register_test ("ui-file", selftests::file::run_tests); diff --git a/gdb/unittests/unique_xmalloc_ptr_char.c b/gdb/unittests/unique_xmalloc_ptr_char.c index 984f692..7f61c06 100644 --- a/gdb/unittests/unique_xmalloc_ptr_char.c +++ b/gdb/unittests/unique_xmalloc_ptr_char.c @@ -47,9 +47,7 @@ unique_xmalloc_ptr_char () } } -void _initialize_unique_xmalloc_ptr_char (); -void -_initialize_unique_xmalloc_ptr_char () +INIT_GDB_FILE (unique_xmalloc_ptr_char) { selftests::register_test ("unique_xmalloc_ptr_char", selftests::unpack::unique_xmalloc_ptr_char); diff --git a/gdb/unittests/unpack-selftests.c b/gdb/unittests/unpack-selftests.c index 54af777..fccf7a2 100644 --- a/gdb/unittests/unpack-selftests.c +++ b/gdb/unittests/unpack-selftests.c @@ -52,9 +52,7 @@ unpack_field_as_long_tests (struct gdbarch *arch) } } -void _initialize_unpack_selftests (); -void -_initialize_unpack_selftests () +INIT_GDB_FILE (unpack_selftests) { selftests::register_test_foreach_arch ("unpack_field_as_long", selftests::unpack::unpack_field_as_long_tests); diff --git a/gdb/unittests/utils-selftests.c b/gdb/unittests/utils-selftests.c deleted file mode 100644 index b1c457c..0000000 --- a/gdb/unittests/utils-selftests.c +++ /dev/null @@ -1,59 +0,0 @@ -/* Unit tests for the utils.c file. - - Copyright (C) 2018-2025 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. */ - -#include "utils.h" -#include "gdbsupport/selftest.h" - -namespace selftests { -namespace utils { - -static void -test_substitute_path_component () -{ - auto test = [] (std::string s, const char *from, const char *to, - const char *expected) - { - char *temp = xstrdup (s.c_str ()); - substitute_path_component (&temp, from, to); - SELF_CHECK (strcmp (temp, expected) == 0); - xfree (temp); - }; - - test ("/abc/$def/g", "abc", "xyz", "/xyz/$def/g"); - test ("abc/$def/g", "abc", "xyz", "xyz/$def/g"); - test ("/abc/$def/g", "$def", "xyz", "/abc/xyz/g"); - test ("/abc/$def/g", "g", "xyz", "/abc/$def/xyz"); - test ("/abc/$def/g", "ab", "xyz", "/abc/$def/g"); - test ("/abc/$def/g", "def", "xyz", "/abc/$def/g"); - test ("/abc/$def/g", "abc", "abc", "/abc/$def/g"); - test ("/abc/$def/g", "abc", "", "//$def/g"); - test ("/abc/$def/g", "abc/$def", "xyz", "/xyz/g"); - test ("/abc/$def/abc", "abc", "xyz", "/xyz/$def/xyz"); -} - -} -} - -void _initialize_utils_selftests (); -void -_initialize_utils_selftests () -{ - selftests::register_test ("substitute_path_component", - selftests::utils::test_substitute_path_component); -} diff --git a/gdb/unittests/vec-utils-selftests.c b/gdb/unittests/vec-utils-selftests.c index 4be0b86..11fad31 100644 --- a/gdb/unittests/vec-utils-selftests.c +++ b/gdb/unittests/vec-utils-selftests.c @@ -65,9 +65,7 @@ unordered_remove_tests () } /* namespace vector_utils_tests */ } /* namespace selftests */ -void _initialize_vec_utils_selftests (); -void -_initialize_vec_utils_selftests () +INIT_GDB_FILE (vec_utils_selftests) { selftests::register_test ("unordered_remove", diff --git a/gdb/unittests/xml-utils-selftests.c b/gdb/unittests/xml-utils-selftests.c index 5884faa..f4a637b 100644 --- a/gdb/unittests/xml-utils-selftests.c +++ b/gdb/unittests/xml-utils-selftests.c @@ -47,9 +47,7 @@ static void test_xml_escape_text_append () } } -void _initialize_xml_utils (); -void -_initialize_xml_utils () +INIT_GDB_FILE (xml_utils) { selftests::register_test ("xml_escape_text", selftests::xml_utils::test_xml_escape_text); diff --git a/gdb/user-regs.c b/gdb/user-regs.c index 5860d7d..7170cda 100644 --- a/gdb/user-regs.c +++ b/gdb/user-regs.c @@ -237,9 +237,7 @@ maintenance_print_user_registers (const char *args, int from_tty) } } -void _initialize_user_regs (); -void -_initialize_user_regs () +INIT_GDB_FILE (user_regs) { add_cmd ("user-registers", class_maintenance, maintenance_print_user_registers, diff --git a/gdb/utils.c b/gdb/utils.c index 6cdc3f4..10d3d51 100644 --- a/gdb/utils.c +++ b/gdb/utils.c @@ -54,7 +54,6 @@ #include "top.h" #include "ui.h" #include "main.h" -#include "solist.h" #include "inferior.h" @@ -1402,7 +1401,26 @@ pager_file::emit_style_escape (const ui_file_style &style) { m_applied_style = style; if (m_paging) - m_stream->emit_style_escape (style); + { + /* Previous style changes will have been sent to m_stream via + escape sequences encoded in the m_wrap_buffer. As a result, + the m_stream->m_applied_style will not have been updated. + + If we now use m_stream->emit_style_escape, then the required + style might not actually be emitted as the requested style + might happen to match the out of date value in + m_stream->m_applied_style. + + Instead, send the style change directly using m_stream->puts. + + However, we track what style is currently applied to the + underlying stream in m_stream_style, this is updated whenever + m_wrap_buffer is flushed to the underlying stream. And so, if + the style we are applying matches what we know is currently + applied to the underlying stream, then we can skip sending + this style to the stream. */ + this->set_stream_style (m_applied_style); + } else m_wrap_buffer.append (style.to_ansi ()); } @@ -1425,8 +1443,8 @@ pager_file::prompt_for_continue () scoped_restore save_paging = make_scoped_restore (&m_paging, true); - /* Clear the current styling. */ - m_stream->emit_style_escape (ui_file_style ()); + /* Clear the current styling on ourselves and the managed stream. */ + this->emit_style_escape (ui_file_style ()); if (annotation_level > 1) m_stream->puts (("\n\032\032pre-prompt-for-continue\n")); @@ -1509,6 +1527,7 @@ pager_file::flush_wrap_buffer () if (!m_paging && !m_wrap_buffer.empty ()) { m_stream->puts (m_wrap_buffer.c_str ()); + m_stream_style = m_applied_style; m_wrap_buffer.clear (); } } @@ -1725,7 +1744,8 @@ pager_file::puts (const char *linebuffer) current applied style to how it was at the WRAP_COLUMN location. */ m_applied_style = m_wrap_style; - m_stream->emit_style_escape (ui_file_style ()); + this->set_stream_style (ui_file_style ()); + /* If we aren't actually wrapping, don't output newline -- if chars_per_line is right, we probably just overflowed anyway; if it's wrong, @@ -1753,7 +1773,7 @@ pager_file::puts (const char *linebuffer) /* Having finished inserting the wrapping we should restore the style as it was at the WRAP_COLUMN. */ - m_stream->emit_style_escape (m_wrap_style); + this->set_stream_style (m_wrap_style); /* The WRAP_BUFFER will still contain content, and that content might set some alternative style. Restore @@ -1768,7 +1788,7 @@ pager_file::puts (const char *linebuffer) m_wrap_column = 0; /* And disable fancy wrap */ } else if (did_paginate) - m_stream->emit_style_escape (save_style); + this->emit_style_escape (save_style); } } @@ -1789,7 +1809,7 @@ void pager_file::write (const char *buf, long length_buf) { /* We have to make a string here because the pager uses - skip_ansi_escape, which requires NUL-termination. */ + examine_ansi_escape, which requires NUL-termination. */ std::string str (buf, length_buf); this->puts (str.c_str ()); } @@ -3333,7 +3353,7 @@ gdb_argv_as_array_view_test () argument. */ std::string -ldirname (const char *filename) +gdb_ldirname (const char *filename) { std::string dirname; const char *base = lbasename (filename); @@ -3375,51 +3395,6 @@ parse_pid_to_attach (const char *args) return pid; } -/* Substitute all occurrences of string FROM by string TO in *STRINGP. *STRINGP - must come from xrealloc-compatible allocator and it may be updated. FROM - needs to be delimited by IS_DIR_SEPARATOR or DIRNAME_SEPARATOR (or be - located at the start or end of *STRINGP. */ - -void -substitute_path_component (char **stringp, const char *from, const char *to) -{ - char *string = *stringp, *s; - const size_t from_len = strlen (from); - const size_t to_len = strlen (to); - - for (s = string;;) - { - s = strstr (s, from); - if (s == NULL) - break; - - if ((s == string || IS_DIR_SEPARATOR (s[-1]) - || s[-1] == DIRNAME_SEPARATOR) - && (s[from_len] == '\0' || IS_DIR_SEPARATOR (s[from_len]) - || s[from_len] == DIRNAME_SEPARATOR)) - { - char *string_new; - - string_new - = (char *) xrealloc (string, (strlen (string) + to_len + 1)); - - /* Relocate the current S pointer. */ - s = s - string + string_new; - string = string_new; - - /* Replace from by to. */ - memmove (&s[to_len], &s[from_len], strlen (&s[from_len]) + 1); - memcpy (s, to, to_len); - - s += to_len; - } - else - s++; - } - - *stringp = string; -} - #ifdef HAVE_WAITPID #ifdef SIGALRM @@ -3741,9 +3716,7 @@ test_assign_set_return_if_changed () } #endif -void _initialize_utils (); -void -_initialize_utils () +INIT_GDB_FILE (utils) { add_setshow_uinteger_cmd ("width", class_support, &chars_per_line, _("\ Set number of characters where GDB should wrap lines of its output."), _("\ diff --git a/gdb/utils.h b/gdb/utils.h index bc8c2ef..b37e8f7 100644 --- a/gdb/utils.h +++ b/gdb/utils.h @@ -133,10 +133,7 @@ private: extern int gdb_filename_fnmatch (const char *pattern, const char *string, int flags); -extern void substitute_path_component (char **stringp, const char *from, - const char *to); - -std::string ldirname (const char *filename); +std::string gdb_ldirname (const char *filename); extern int count_path_elements (const char *path); diff --git a/gdb/v850-tdep.c b/gdb/v850-tdep.c index e9ec858..d592344 100644 --- a/gdb/v850-tdep.c +++ b/gdb/v850-tdep.c @@ -1461,9 +1461,7 @@ v850_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return gdbarch; } -void _initialize_v850_tdep (); -void -_initialize_v850_tdep () +INIT_GDB_FILE (v850_tdep) { gdbarch_register (bfd_arch_v850, v850_gdbarch_init); gdbarch_register (bfd_arch_v850_rh850, v850_gdbarch_init); diff --git a/gdb/valops.c b/gdb/valops.c index 94f908d..85d69fb 100644 --- a/gdb/valops.c +++ b/gdb/valops.c @@ -45,9 +45,6 @@ /* Local functions. */ -static int typecmp (bool staticp, bool varargs, int nargs, - struct field t1[], const gdb::array_view<value *> t2); - static struct value *search_struct_field (const char *, struct value *, struct type *, int); @@ -1766,7 +1763,7 @@ value_string (const gdb_byte *ptr, ssize_t count, struct type *char_type) /* See if we can pass arguments in T2 to a function which takes arguments - of types T1. T1 is a list of NARGS arguments, and T2 is an array_view + of types T1. T1 is an array_view of arguments, and T2 is an array_view of the values we're trying to pass. If some arguments need coercion of some sort, then the coerced values are written into T2. Return value is 0 if the arguments could be matched, or the position at which they @@ -1783,8 +1780,8 @@ value_string (const gdb_byte *ptr, ssize_t count, struct type *char_type) requested operation is type secure, shouldn't we? FIXME. */ static int -typecmp (bool staticp, bool varargs, int nargs, - struct field t1[], gdb::array_view<value *> t2) +typecmp (bool staticp, bool varargs, + gdb::array_view<struct field> t1, gdb::array_view<value *> t2) { int i; @@ -1794,7 +1791,7 @@ typecmp (bool staticp, bool varargs, int nargs, t2 = t2.slice (1); for (i = 0; - (i < nargs) && t1[i].type ()->code () != TYPE_CODE_VOID; + (i < t1.size ()) && t1[i].type ()->code () != TYPE_CODE_VOID; i++) { struct type *tt1, *tt2; @@ -2227,7 +2224,6 @@ search_struct_method (const char *name, struct value **arg1p, gdb_assert (args.has_value ()); if (!typecmp (TYPE_FN_FIELD_STATIC_P (f, j), TYPE_FN_FIELD_TYPE (f, j)->has_varargs (), - TYPE_FN_FIELD_TYPE (f, j)->num_fields (), TYPE_FN_FIELD_ARGS (f, j), *args)) { if (TYPE_FN_FIELD_VIRTUAL_P (f, j)) @@ -3826,7 +3822,7 @@ value_maybe_namespace_elt (const struct type *curtype, if (sym.symbol == NULL) return NULL; else if ((noside == EVAL_AVOID_SIDE_EFFECTS) - && (sym.symbol->aclass () == LOC_TYPEDEF)) + && (sym.symbol->loc_class () == LOC_TYPEDEF)) result = value::allocate (sym.symbol->type ()); else result = value_of_variable (sym.symbol, sym.block); @@ -4162,9 +4158,7 @@ cast_into_complex (struct type *type, struct value *val) error (_("cannot cast non-number to complex")); } -void _initialize_valops (); -void -_initialize_valops () +INIT_GDB_FILE (valops) { add_setshow_boolean_cmd ("overload-resolution", class_support, &overload_resolution, _("\ diff --git a/gdb/valprint.c b/gdb/valprint.c index ed03f6d..305faf7 100644 --- a/gdb/valprint.c +++ b/gdb/valprint.c @@ -3194,9 +3194,7 @@ test_print_flags (gdbarch *arch) #endif -void _initialize_valprint (); -void -_initialize_valprint () +INIT_GDB_FILE (valprint) { #if GDB_SELF_TEST selftests::register_test_foreach_arch ("print-flags", test_print_flags); diff --git a/gdb/value.c b/gdb/value.c index 41dce77..82d9a86 100644 --- a/gdb/value.c +++ b/gdb/value.c @@ -45,6 +45,7 @@ #include <utility> #include <vector> #include "completer.h" +#include "gdbsupport/cleanups.h" #include "gdbsupport/selftest.h" #include "gdbsupport/array-view.h" #include "cli/cli-style.h" @@ -4496,9 +4497,7 @@ test_value_copy () } /* namespace selftests */ #endif /* GDB_SELF_TEST */ -void _initialize_values (); -void -_initialize_values () +INIT_GDB_FILE (values) { cmd_list_element *show_convenience_cmd = add_cmd ("convenience", no_class, show_convenience, _("\ diff --git a/gdb/varobj.c b/gdb/varobj.c index 8dc7a30..4dc986a 100644 --- a/gdb/varobj.c +++ b/gdb/varobj.c @@ -2424,9 +2424,7 @@ eq_varobj_and_string (const void *a, const void *b) return obj->obj_name == name; } -void _initialize_varobj (); -void -_initialize_varobj () +INIT_GDB_FILE (varobj) { varobj_table = htab_create_alloc (5, hash_varobj, eq_varobj_and_string, nullptr, xcalloc, xfree); diff --git a/gdb/vax-bsd-nat.c b/gdb/vax-bsd-nat.c index 6d8bb54..717314e 100644 --- a/gdb/vax-bsd-nat.c +++ b/gdb/vax-bsd-nat.c @@ -136,9 +136,7 @@ vaxbsd_supply_pcb (struct regcache *regcache, struct pcb *pcb) return 1; } -void _initialize_vaxbsd_nat (); -void -_initialize_vaxbsd_nat () +INIT_GDB_FILE (vaxbsd_nat) { add_inf_child_target (&the_vax_bsd_nat_target); diff --git a/gdb/vax-netbsd-tdep.c b/gdb/vax-netbsd-tdep.c index 34a9150..7781264 100644 --- a/gdb/vax-netbsd-tdep.c +++ b/gdb/vax-netbsd-tdep.c @@ -32,13 +32,10 @@ vaxnbsd_elf_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) nbsd_init_abi (info, gdbarch); /* NetBSD ELF uses SVR4-style shared libraries. */ - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); } -void _initialize_vaxnbsd_tdep (); -void -_initialize_vaxnbsd_tdep () +INIT_GDB_FILE (vaxnbsd_tdep) { gdbarch_register_osabi (bfd_arch_vax, 0, GDB_OSABI_NETBSD, vaxnbsd_elf_init_abi); diff --git a/gdb/vax-tdep.c b/gdb/vax-tdep.c index 94dc308..0a83f4f 100644 --- a/gdb/vax-tdep.c +++ b/gdb/vax-tdep.c @@ -506,9 +506,7 @@ vax_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) return (gdbarch); } -void _initialize_vax_tdep (); -void -_initialize_vax_tdep () +INIT_GDB_FILE (vax_tdep) { gdbarch_register (bfd_arch_vax, vax_gdbarch_init, NULL); } diff --git a/gdb/windows-nat.c b/gdb/windows-nat.c index 0fee4ad..c001d38 100644 --- a/gdb/windows-nat.c +++ b/gdb/windows-nat.c @@ -56,7 +56,6 @@ #include "cli/cli-style.h" #include <unistd.h> #include "exec.h" -#include "solist.h" #include "solib.h" #include "xml-support.h" #include "inttypes.h" @@ -433,7 +432,12 @@ wait_for_single (HANDLE handle, DWORD howlong) { while (true) { - DWORD r = WaitForSingleObject (handle, howlong); + /* Using an INFINITE argument to WaitForSingleObject may cause a system + deadlock. Avoid it by waiting for a bit in a loop instead. */ + DWORD milliseconds = howlong == INFINITE ? 100 : howlong; + DWORD r = WaitForSingleObject (handle, milliseconds); + if (howlong == INFINITE && r == WAIT_TIMEOUT) + continue; if (r == WAIT_OBJECT_0) return; if (r == WAIT_FAILED) @@ -3089,9 +3093,7 @@ windows_nat_target::thread_name (struct thread_info *thr) } -void _initialize_windows_nat (); -void -_initialize_windows_nat () +INIT_GDB_FILE (windows_nat) { x86_dr_low.set_control = cygwin_set_dr7; x86_dr_low.set_addr = cygwin_set_dr; @@ -3265,9 +3267,7 @@ windows_nat_target::thread_alive (ptid_t ptid) return WaitForSingleObject (th->h, 0) != WAIT_OBJECT_0; } -void _initialize_check_for_gdb_ini (); -void -_initialize_check_for_gdb_ini () +INIT_GDB_FILE (check_for_gdb_ini) { char *homedir; if (inhibit_gdbinit) diff --git a/gdb/windows-tdep.c b/gdb/windows-tdep.c index 0ba1472..05335d2 100644 --- a/gdb/windows-tdep.c +++ b/gdb/windows-tdep.c @@ -36,7 +36,6 @@ #include "gdbcore.h" #include "coff/internal.h" #include "libcoff.h" -#include "solist.h" #define CYGWIN_DLL_NAME "cygwin1.dll" @@ -863,10 +862,25 @@ windows_get_siginfo_type (struct gdbarch *gdbarch) return siginfo_type; } +/* solib_ops for Windows systems. */ + +struct windows_solib_ops : target_solib_ops +{ + void create_inferior_hook (int from_tty) const override; +}; + +/* Return a new solib_ops for Windows systems. */ + +static solib_ops_up +make_windows_solib_ops () +{ + return std::make_unique<windows_solib_ops> (); +} + /* Implement the "solib_create_inferior_hook" solib_ops method. */ -static void -windows_solib_create_inferior_hook (int from_tty) +void +windows_solib_ops::create_inferior_hook (int from_tty) const { CORE_ADDR exec_base = 0; @@ -911,8 +925,6 @@ windows_solib_create_inferior_hook (int from_tty) } } -static solib_ops windows_so_ops; - /* Common parts for gdbarch initialization for the Windows and Cygwin OS ABIs. */ @@ -929,10 +941,7 @@ windows_init_abi_common (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_iterate_over_objfiles_in_search_order (gdbarch, windows_iterate_over_objfiles_in_search_order); - windows_so_ops = solib_target_so_ops; - windows_so_ops.solib_create_inferior_hook - = windows_solib_create_inferior_hook; - set_gdbarch_so_ops (gdbarch, &windows_so_ops); + set_gdbarch_make_solib_ops (gdbarch, make_windows_solib_ops); set_gdbarch_get_siginfo_type (gdbarch, windows_get_siginfo_type); } @@ -1183,9 +1192,7 @@ windows_core_pid_to_str (struct gdbarch *gdbarch, ptid_t ptid) return normal_pid_to_str (ptid); } -void _initialize_windows_tdep (); -void -_initialize_windows_tdep () +INIT_GDB_FILE (windows_tdep) { init_w32_command_list (); cmd_list_element *info_w32_thread_information_block_cmd diff --git a/gdb/x86-bsd-nat.c b/gdb/x86-bsd-nat.c index 0c9ddfd..37376bb 100644 --- a/gdb/x86-bsd-nat.c +++ b/gdb/x86-bsd-nat.c @@ -128,9 +128,7 @@ x86bsd_dr_get_control (void) #endif /* PT_GETDBREGS */ -void _initialize_x86_bsd_nat (); -void -_initialize_x86_bsd_nat () +INIT_GDB_FILE (x86_bsd_nat) { #ifdef HAVE_PT_GETDBREGS x86_dr_low.set_control = x86bsd_dr_set_control; diff --git a/gdb/x86-gnu-nat.c b/gdb/x86-gnu-nat.c index b9ba95b..e088189 100644 --- a/gdb/x86-gnu-nat.c +++ b/gdb/x86-gnu-nat.c @@ -491,9 +491,7 @@ x86_gnu_dr_get_control (void) } #endif /* i386_DEBUG_STATE */ -void _initialize_x86_gnu_nat (); -void -_initialize_x86_gnu_nat () +INIT_GDB_FILE (x86_gnu_nat) { #ifdef i386_DEBUG_STATE x86_dr_low.set_control = x86_gnu_dr_set_control; diff --git a/gdb/x86-linux-nat.c b/gdb/x86-linux-nat.c index fc7c5f6..81db5d8 100644 --- a/gdb/x86-linux-nat.c +++ b/gdb/x86-linux-nat.c @@ -210,9 +210,7 @@ x86_linux_get_thread_area (pid_t pid, void *addr, unsigned int *base_addr) } -void _initialize_x86_linux_nat (); -void -_initialize_x86_linux_nat () +INIT_GDB_FILE (x86_linux_nat) { /* Initialize the debug register function vectors. */ x86_dr_low.set_control = x86_linux_dr_set_control; diff --git a/gdb/xcoffread.c b/gdb/xcoffread.c index e91c64c..6528cab 100644 --- a/gdb/xcoffread.c +++ b/gdb/xcoffread.c @@ -1491,7 +1491,7 @@ process_xcoff_symbol (struct xcoff_symbol *cs, struct objfile *objfile) sym->set_type (builtin_type (objfile)->nodebug_text_symbol); sym->set_domain (FUNCTION_DOMAIN); - sym->set_aclass_index (LOC_BLOCK); + sym->set_loc_class_index (LOC_BLOCK); sym2 = new (&objfile->objfile_obstack) symbol (*sym); if (cs->c_sclass == C_EXT || C_WEAKEXT) @@ -2999,9 +2999,7 @@ xcoff_get_n_import_files (bfd *abfd) return l_nimpid - 1; } -void _initialize_xcoffread (); -void -_initialize_xcoffread () +INIT_GDB_FILE (xcoffread) { add_symtab_fns (bfd_target_xcoff_flavour, &xcoff_sym_fns); } diff --git a/gdb/xml-support.c b/gdb/xml-support.c index fb8b612..08524f8 100644 --- a/gdb/xml-support.c +++ b/gdb/xml-support.c @@ -999,10 +999,7 @@ xml_fetch_content_from_file (const char *filename, const char *dirname) return text; } -void _initialize_xml_support (); -void _initialize_xml_support (); -void -_initialize_xml_support () +INIT_GDB_FILE (xml_support) { add_setshow_boolean_cmd ("xml", class_maintenance, &debug_xml, _("Set XML parser debugging."), diff --git a/gdb/xml-syscall.c b/gdb/xml-syscall.c index fe0ea2b..b58fe5d0 100644 --- a/gdb/xml-syscall.c +++ b/gdb/xml-syscall.c @@ -319,7 +319,7 @@ xml_init_syscalls_info (const char *filename) if (!full_file) return NULL; - const std::string dirname = ldirname (filename); + const std::string dirname = gdb_ldirname (filename); auto fetch_another = [&dirname] (const char *name) { return xml_fetch_content_from_file (name, dirname.c_str ()); diff --git a/gdb/xml-tdesc.c b/gdb/xml-tdesc.c index 6c095af..2f213dc 100644 --- a/gdb/xml-tdesc.c +++ b/gdb/xml-tdesc.c @@ -670,7 +670,7 @@ file_read_description_xml (const char *filename) return NULL; } - const std::string dirname = ldirname (filename); + const std::string dirname = gdb_ldirname (filename); auto fetch_another = [&dirname] (const char *name) { return xml_fetch_content_from_file (name, dirname.c_str ()); diff --git a/gdb/xstormy16-tdep.c b/gdb/xstormy16-tdep.c index 8482461..b4042f1 100644 --- a/gdb/xstormy16-tdep.c +++ b/gdb/xstormy16-tdep.c @@ -828,9 +828,7 @@ xstormy16_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) Initializer function for the Sanyo Xstormy16a module. Called by gdb at start-up. */ -void _initialize_xstormy16_tdep (); -void -_initialize_xstormy16_tdep () +INIT_GDB_FILE (xstormy16_tdep) { gdbarch_register (bfd_arch_xstormy16, xstormy16_gdbarch_init); } diff --git a/gdb/xtensa-linux-nat.c b/gdb/xtensa-linux-nat.c index 11fbf55..4a50f38 100644 --- a/gdb/xtensa-linux-nat.c +++ b/gdb/xtensa-linux-nat.c @@ -327,9 +327,7 @@ ps_get_thread_area (struct ps_prochandle *ph, return PS_OK; } -void _initialize_xtensa_linux_nat (); -void -_initialize_xtensa_linux_nat () +INIT_GDB_FILE (xtensa_linux_nat) { const xtensa_regtable_t *ptr; diff --git a/gdb/xtensa-linux-tdep.c b/gdb/xtensa-linux-tdep.c index b72d683..7792408 100644 --- a/gdb/xtensa-linux-tdep.c +++ b/gdb/xtensa-linux-tdep.c @@ -20,6 +20,7 @@ #include "xtensa-tdep.h" #include "osabi.h" #include "linux-tdep.h" +#include "solib-svr4-linux.h" #include "solib-svr4.h" #include "symtab.h" #include "gdbarch.h" @@ -111,8 +112,7 @@ xtensa_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) linux_init_abi (info, gdbarch, 0); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, linux_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_linux_ilp32_svr4_solib_ops); set_gdbarch_gdb_signal_from_target (gdbarch, xtensa_linux_gdb_signal_from_target); @@ -124,9 +124,7 @@ xtensa_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) svr4_fetch_objfile_link_map); } -void _initialize_xtensa_linux_tdep (); -void -_initialize_xtensa_linux_tdep () +INIT_GDB_FILE (xtensa_linux_tdep) { gdbarch_register_osabi (bfd_arch_xtensa, bfd_mach_xtensa, GDB_OSABI_LINUX, xtensa_linux_init_abi); diff --git a/gdb/xtensa-tdep.c b/gdb/xtensa-tdep.c index a4bbffb..8a2f129 100644 --- a/gdb/xtensa-tdep.c +++ b/gdb/xtensa-tdep.c @@ -3238,8 +3238,7 @@ xtensa_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_iterate_over_regset_sections (gdbarch, xtensa_iterate_over_regset_sections); - set_solib_svr4_fetch_link_map_offsets - (gdbarch, svr4_ilp32_fetch_link_map_offsets); + set_solib_svr4_ops (gdbarch, make_svr4_ilp32_solib_ops); /* Hook in the ABI-specific overrides, if they have been registered. */ gdbarch_init_osabi (info, gdbarch); @@ -3253,9 +3252,7 @@ xtensa_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file) error (_("xtensa_dump_tdep(): not implemented")); } -void _initialize_xtensa_tdep (); -void -_initialize_xtensa_tdep () +INIT_GDB_FILE (xtensa_tdep) { gdbarch_register (bfd_arch_xtensa, xtensa_gdbarch_init, xtensa_dump_tdep); xtensa_init_reggroups (); diff --git a/gdb/z80-tdep.c b/gdb/z80-tdep.c index bfa52dd..8f3924d 100644 --- a/gdb/z80-tdep.c +++ b/gdb/z80-tdep.c @@ -1173,7 +1173,7 @@ z80_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) set_gdbarch_skip_prologue (gdbarch, z80_skip_prologue); set_gdbarch_inner_than (gdbarch, core_addr_lessthan); // falling stack - set_gdbarch_software_single_step (gdbarch, z80_software_single_step); + set_gdbarch_get_next_pcs (gdbarch, z80_software_single_step); set_gdbarch_breakpoint_kind_from_pc (gdbarch, z80_breakpoint_kind_from_pc); set_gdbarch_sw_breakpoint_from_kind (gdbarch, z80_sw_breakpoint_from_kind); set_gdbarch_insn_is_call (gdbarch, z80_insn_is_call); @@ -1331,14 +1331,14 @@ ez80_ddfd_insn_table[] = { 0007, 0307, 2, insn_default }, //"ld rr,(ii+d)" { 0061, 0377, 2, insn_default }, //"ld ii,(ii+d)" /* common instructions */ - { 0011, 0367, 2, insn_default }, //"add ii,rr" + { 0011, 0317, 1, insn_default }, //"add ii,rr" { 0041, 0377, 3, insn_default }, //"ld ii,nn" { 0042, 0367, 3, insn_default }, //"ld (nn),ii", "ld ii,(nn)" { 0043, 0367, 1, insn_default }, //"inc ii", "dec ii" { 0044, 0366, 1, insn_default }, //"inc/dec iih/iil" { 0046, 0367, 2, insn_default }, //"ld iih,n", "ld iil,n" { 0064, 0376, 2, insn_default }, //"inc (ii+d)", "dec (ii+d)" - { 0066, 0377, 2, insn_default }, //"ld (ii+d),n" + { 0066, 0377, 3, insn_default }, //"ld (ii+d),n" { 0166, 0377, 0, insn_default }, //not an instruction { 0160, 0370, 2, insn_default }, //"ld (ii+d),r" { 0104, 0306, 1, insn_default }, //"ld r,iih", "ld r,iil" @@ -1360,7 +1360,7 @@ ez80_adl_ddfd_insn_table[] = { { 0007, 0307, 2, insn_default }, //"ld rr,(ii+d)" { 0061, 0377, 2, insn_default }, //"ld ii,(ii+d)" - { 0011, 0367, 1, insn_default }, //"add ii,rr" + { 0011, 0317, 1, insn_default }, //"add ii,rr" { 0041, 0377, 4, insn_default }, //"ld ii,nn" { 0042, 0367, 4, insn_default }, //"ld (nn),ii", "ld ii,(nn)" { 0043, 0367, 1, insn_default }, //"inc ii", "dec ii" @@ -1455,10 +1455,7 @@ z80_get_insn_info (struct gdbarch *gdbarch, const gdb_byte *buf, int *size) while (1); } -extern initialize_file_ftype _initialize_z80_tdep; - -void -_initialize_z80_tdep () +INIT_GDB_FILE (z80_tdep) { gdbarch_register (bfd_arch_z80, z80_gdbarch_init); initialize_tdesc_z80 (); |