diff options
author | Andrew Burgess <aburgess@redhat.com> | 2023-02-22 12:15:34 +0000 |
---|---|---|
committer | Andrew Burgess <aburgess@redhat.com> | 2023-04-06 14:22:10 +0100 |
commit | cf141dd8ccd36efe833aae3ccdb060b517cc1112 (patch) | |
tree | 1265aef99419f042e91ed4a21490e5eb4a2938dc /gdb/aarch64-tdep.c | |
parent | 11aa9f628e28c077c860480571c152e07e6a4938 (diff) | |
download | binutils-cf141dd8ccd36efe833aae3ccdb060b517cc1112.zip binutils-cf141dd8ccd36efe833aae3ccdb060b517cc1112.tar.gz binutils-cf141dd8ccd36efe833aae3ccdb060b517cc1112.tar.bz2 |
gdb: fix reg corruption from displaced stepping on amd64
This commit aims to address a problem that exists with the current
approach to displaced stepping, and was identified in PR gdb/22921.
Displaced stepping is currently supported on AArch64, ARM, amd64,
i386, rs6000 (ppc), and s390. Of these, I believe there is a problem
with the current approach which will impact amd64 and ARM, and can
lead to random register corruption when the inferior makes use of
asynchronous signals and GDB is using displaced stepping.
The problem can be found in displaced_step_buffers::finish in
displaced-stepping.c, and is this; after GDB tries to perform a
displaced step, and the inferior stops, GDB classifies the stop into
one of two states, either the displaced step succeeded, or the
displaced step failed.
If the displaced step succeeded then gdbarch_displaced_step_fixup is
called, which has the job of fixing up the state of the current
inferior as if the step had not been performed in a displaced manner.
This all seems just fine.
However, if the displaced step is considered to have not completed
then GDB doesn't call gdbarch_displaced_step_fixup, instead GDB
remains in displaced_step_buffers::finish and just performs a minimal
fixup which involves adjusting the program counter back to its
original value.
The problem here is that for amd64 and ARM setting up for a displaced
step can involve changing the values in some temporary registers. If
the displaced step succeeds then this is fine; after the step the
temporary registers are restored to their original values in the
architecture specific code.
But if the displaced step does not succeed then the temporary
registers are never restored, and they retain their modified values.
In this context a temporary register is simply any register that is
not otherwise used by the instruction being stepped that the
architecture specific code considers safe to borrow for the lifetime
of the instruction being stepped.
In the bug PR gdb/22921, the amd64 instruction being stepped is
an rip-relative instruction like this:
jmp *0x2fe2(%rip)
When we displaced step this instruction we borrow a register, and
modify the instruction to something like:
jmp *0x2fe2(%rcx)
with %rcx having its value adjusted to contain the original %rip
value.
Now if the displaced step does not succeed, then %rcx will be left
with a corrupted value. Obviously corrupting any register is bad; in
the bug report this problem was spotted because %rcx is used as a
function argument register.
And finally, why might a displaced step not succeed? Asynchronous
signals provides one reason. GDB sets up for the displaced step and,
at that precise moment, the OS delivers a signal (SIGALRM in the bug
report), the signal stops the inferior at the address of the displaced
instruction. GDB cancels the displaced instruction, handles the
signal, and then tries again with the displaced step. But it is that
first cancellation of the displaced step that causes the problem; in
that case GDB (correctly) sees the displaced step as having not
completed, and so does not perform the architecture specific fixup,
leaving the register corrupted.
The reason why I think AArch64, rs600, i386, and s390 are not effected
by this problem is that I don't believe these architectures make use
of any temporary registers, so when a displaced step is not completed
successfully, the minimal fix up is sufficient.
On amd64 we use at most one temporary register.
On ARM, looking at arm_displaced_step_copy_insn_closure, we could
modify up to 16 temporary registers, and the instruction being
displaced stepped could be expanded to multiple replacement
instructions, which increases the chances of this bug triggering.
This commit only aims to address the issue on amd64 for now, though I
believe that the approach I'm proposing here might be applicable for
ARM too.
What I propose is that we always call gdbarch_displaced_step_fixup.
We will now pass an extra argument to gdbarch_displaced_step_fixup,
this a boolean that indicates whether GDB thinks the displaced step
completed successfully or not.
When this flag is false this indicates that the displaced step halted
for some "other" reason. On ARM GDB can potentially read the
inferior's program counter in order figure out how far through the
sequence of replacement instructions we got, and from that GDB can
figure out what fixup needs to be performed.
On targets like amd64 the problem is slightly easier as displaced
stepping only uses a single replacement instruction. If the displaced
step didn't complete the GDB knows that the single instruction didn't
execute.
The point is that by always calling gdbarch_displaced_step_fixup, each
architecture can now ensure that the inferior state is fixed up
correctly in all cases, not just the success case.
On amd64 this ensures that we always restore the temporary register
value, and so bug PR gdb/22921 is resolved.
In order to move all architectures to this new API, I have moved the
minimal roll-back version of the code inside the architecture specific
fixup functions for AArch64, rs600, s390, and ARM. For all of these
except ARM I think this is good enough, as no temporaries are used all
that's needed is the program counter restore anyway.
For ARM the minimal code is no worse than what we had before, though I
do consider this architecture's displaced-stepping broken.
I've updated the gdb.arch/amd64-disp-step.exp test to cover the
'jmpq*' instruction that was causing problems in the original bug, and
also added support for testing the displaced step in the presence of
asynchronous signal delivery.
I've also added two new tests (for amd64 and i386) that check that GDB
can correctly handle displaced stepping over a single instruction that
branches to itself. I added these tests after a first version of this
patch relied too much on checking the program-counter value in order
to see if the displaced instruction had executed. This works fine in
almost all cases, but when an instruction branches to itself a pure
program counter check is not sufficient. The new tests expose this
problem.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22921
Approved-By: Pedro Alves <pedro@palves.net>
Diffstat (limited to 'gdb/aarch64-tdep.c')
-rw-r--r-- | gdb/aarch64-tdep.c | 17 |
1 files changed, 12 insertions, 5 deletions
diff --git a/gdb/aarch64-tdep.c b/gdb/aarch64-tdep.c index a1daa9a..d8349e4 100644 --- a/gdb/aarch64-tdep.c +++ b/gdb/aarch64-tdep.c @@ -3371,14 +3371,21 @@ void aarch64_displaced_step_fixup (struct gdbarch *gdbarch, struct displaced_step_copy_insn_closure *dsc_, CORE_ADDR from, CORE_ADDR to, - struct regcache *regs) + struct regcache *regs, bool completed_p) { - aarch64_displaced_step_copy_insn_closure *dsc - = (aarch64_displaced_step_copy_insn_closure *) dsc_; + CORE_ADDR pc = regcache_read_pc (regs); - ULONGEST pc; + /* If the displaced instruction didn't complete successfully then all we + need to do is restore the program counter. */ + if (!completed_p) + { + pc = from + (pc - to); + regcache_write_pc (regs, pc); + return; + } - regcache_cooked_read_unsigned (regs, AARCH64_PC_REGNUM, &pc); + aarch64_displaced_step_copy_insn_closure *dsc + = (aarch64_displaced_step_copy_insn_closure *) dsc_; displaced_debug_printf ("PC after stepping: %s (was %s).", paddress (gdbarch, pc), paddress (gdbarch, to)); |