aboutsummaryrefslogtreecommitdiff
path: root/gdb/testsuite/gdb.dwarf2/fission-base.exp
AgeCommit message (Collapse)AuthorFilesLines
2024-01-12Update copyright year range in header of all files managed by GDBAndrew Burgess1-1/+1
This commit is the result of the following actions: - Running gdb/copyright.py to update all of the copyright headers to include 2024, - Manually updating a few files the copyright.py script told me to update, these files had copyright headers embedded within the file, - Regenerating gdbsupport/Makefile.in to refresh it's copyright date, - Using grep to find other files that still mentioned 2023. If these files were updated last year from 2022 to 2023 then I've updated them this year to 2024. I'm sure I've probably missed some dates. Feel free to fix them up as you spot them.
2023-01-26[gdb/testsuite] Add and use is_x86_64_m64_targetTom de Vries1-3/+1
Add new proc is_x86_64_m64_target and use it where appropriate. Tested on x86_64-linux.
2023-01-25Use require with is_remoteTom Tromey1-3/+1
This changes some tests to use require with 'is_remote', rather than an explicit test. This adds uniformity helps clean up more spots where a test might exit early without any notification.
2023-01-13Use require dwarf2_supportTom Tromey1-3/+1
This changes some tests to use "require dwarf2_support".
2023-01-01Update copyright year range in header of all files managed by GDBJoel Brobecker1-1/+1
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023.
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-09-01[gdb/testsuite] Fix dwo path in fission-*.STom de Vries1-1/+1
[ Using $build for /home/vries/gdb_versions/devel/build to make things a bit more readable. ] When using make check// to run test-case gdb.dwarf2/fission-base.exp: ... ( cd $build/gdb; make check//unix RUNTESTFLAGS="fission-base.exp" ) ... we run into: ... (gdb) file \ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base^M Reading symbols from \ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base...^M warning: Could not find DWO CU \ $build/gdb/testsuite.1/outputs/gdb.dwarf2/fission-base/fission-base.dwo \ (0x807060504030201) referenced by CU at offset 0xc7 [in module \ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base]^M ... The problem is that the executable refers to the dwo file using path name $build/gdb/testsuite.1/outputs/gdb.dwarf2/fission-base/fission-base.dwo, while the actual dwo file is at $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base.dwo. This is caused by this trick in fission-base.S: ... #define XSTR(s) STR(s) #define STR(s) #s ... .asciz XSTR(DWO) # DW_AT_GNU_dwo_name ... and: ... $ echo | gcc -E -dD - | grep "define unix" ... I used this trick to avoid doing additional_flags=-DDWO=\"$dwo\", since I was concerned that there could be quoting issues. However, I've found other uses of this pattern, f.i. in gdb/testsuite/gdb.base/corefile-buildid.exp: ... additional_flags=-DSHLIB_NAME=\"$dlopen_lib\"] ... So, fix this by: - using additional_flags=-DDWO=\"$dwo\" and - using plain DWO instead of XSTR(DWO) Likewise in other gdb.dwarf2/fission*.exp test-cases. Tested on x86_64-linux, using make check//unix. gdb/testsuite/ChangeLog: 2021-09-01 Tom de Vries <tdevries@suse.de> PR testsuite/28298 * gdb.dwarf2/fission-base.S: Use DWO instead of XSTR(DWO). * gdb.dwarf2/fission-loclists-pie.S: Same. * gdb.dwarf2/fission-loclists.S: Same. * gdb.dwarf2/fission-reread.S: Same. * gdb.dwarf2/fission-base.exp: Use additional_flags=-DDWO=\"$dwo\". * gdb.dwarf2/fission-loclists-pie.exp: Same. * gdb.dwarf2/fission-loclists.exp: Same. * gdb.dwarf2/fission-reread.exp: Same.
2021-04-07gdb/testsuite: fix fission support in the Dwarf assemblerAndrew Burgess1-5/+6
This commit fixes fission support in the Dwarf assembler. I added the new test gdb.dwarf2/fission-absolute-dwo.exp which is a simple example of using the fission support. I also rewrote the existing test gdb.dwarf2/fission-multi-cu.exp to use the new functionality (instead of using an x86-64 only assembler file). To better support compiling the assembler files produced by the Dwarf assembler I have added the new proc build_executable_and_dwo_files in lib/dwarf.exp, this replaces build_executable_from_fission_assembler, all the tests that used the old proc have been updated. Where the old proc assumed a single .S source file which contained the entire test, the new proc allows for multiple source files. The Dwarf assembler already had some fission support, however, this was not actually used in any tests, and when I tried using it there were a few issues. The biggest change is that we now generate DW_FORM_GNU_addr_index instead of DW_FORM_addr for the low and high pc in _handle_macro_at_range, support for the DW_FORM_GNU_addr_index is new in this commit. gdb/testsuite/ChangeLog: * gdb.dwarf2/fission-absolute-dwo.c: New file. * gdb.dwarf2/fission-absolute-dwo.exp: New file. * gdb.dwarf2/fission-base.exp: Use build_executable_and_dwo_files instead of build_executable_from_fission_assembler. * gdb.dwarf2/fission-loclists-pie.exp: Likewise. * gdb.dwarf2/fission-loclists.exp: Likewise.
2021-02-01[gdb/testsuite] Fix gdb.dwarf2/fission-reread.exp with .gdb_indexTom de Vries1-9/+5
When running test-case gdb.dwarf2/fission-reread.exp with target board cc-with-gdb-index, we run into: ... gdb compile failed, warning: Could not find DWO TU \ fission-reread.dwo(0x9022f1ceac7e8b19) referenced by TU at offset 0x0 \ [in module outputs/gdb.dwarf2/fission-reread/fission-reread] ... The problem is that the .dwo file is not found. There's code added in the .exp file to make sure the .dwo can be found: ... # Make sure we can find the .dwo file, regardless of whether we're # running in parallel mode. gdb_test_no_output "set debug-file-directory [file dirname $binfile]" \ "set debug-file-directory" ... This works normally, but not for the gdb invocation done by cc-with-tweaks.sh for target board cc-with-gdb-index. Fix this by finding the full path to the .dwo file and passing it to the compilation. Tested on x86_64-linux with native and target boards cc-with-gdb-index, cc-with-debug-names and readnow. gdb/testsuite/ChangeLog: 2021-02-01 Tom de Vries <tdevries@suse.de> * gdb.dwarf2/fission-base.S: Pass -DDWO=$dwo. * gdb.dwarf2/fission-loclists-pie.S: Same. * gdb.dwarf2/fission-loclists.S: Same. * gdb.dwarf2/fission-multi-cu.S: Same. * gdb.dwarf2/fission-reread.S: Same. * gdb.dwarf2/fission-base.exp: Use DWO. * gdb.dwarf2/fission-loclists-pie.exp: Same. * gdb.dwarf2/fission-loclists.exp: Same. * gdb.dwarf2/fission-multi-cu.exp: Same. * gdb.dwarf2/fission-reread.exp: Same.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-11-04fix some fission testsTom Tromey1-1/+8
A couple of Fission tests rely on the current directory layout. This assumption is not valid in parallel mode. This patch fixes the problem by removing the relative directory from the .S files and instead having the tests set debug-file-directory before opening the main file. 2013-11-04 Tom Tromey <tromey@redhat.com> * gdb.dwarf2/fission-base.S: Remove "gdb.dwarf/". * gdb.dwarf2/fission-base.exp: Set debug-file-directory before loading binfile. * gdb.dwarf2/fission-loclists.S: Remove "gdb.dwarf/". * gdb.dwarf2/fission-loclists.exp: Set debug-file-directory before loading binfile.
2013-09-20 * lib/dwarf.exp (build_executable_from_fission_assembler): New proc.Doug Evans1-11/+8
* gdb.dwarf2/fission-base.S: Update. Split out .dwo into separate file. * gdb.dwarf2/fission-loclists.S: Ditto. * gdb.dwarf2/fission-reread.S: Ditto. * gdb.dwarf2/fission-base.exp: Skip of remote host. Compile with build_executable_from_fission_assembler. * gdb.dwarf2/fission-loclists.exp: Ditto. * gdb.dwarf2/fission-reread.exp: Ditto.
2013-08-22fix some gdb.dwarf2 tests for parallel safetyTom Tromey1-1/+10
This fixes a few gdb.dwarf2 tests to be more parallel-safe. This mostly amounts to changing them to write their files into the directory designated by standard_output_file. Built and regtested on x86-64 Fedora 18. * gdb.dwarf2/clztest.exp: Use standard_testfile. * gdb.dwarf2/dw2-minsym-in-cu.exp: Use standard_testfile. * gdb.dwarf2/fission-base.S: Remove directory from DW_AT_GNU_dwo_name. * gdb.dwarf2/fission-base.exp: Use build_executable. Set debug-file-directory. * gdb.dwarf2/fission-reread.S: Remove directory from DW_AT_GNU_dwo_name. * gdb.dwarf2/fission-reread.exp: Use build_executable. Set debug-file-directory.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-09-11 * gdb.dwarf2/fission-base.S: Include gdb.dwarf2/ in dwo_name.Doug Evans1-11/+1
* gdb.dwarf2/fission-reread.S: Ditto. * gdb.dwarf2/fission-base.exp: Remove setting of debug-file-directory. * gdb.dwarf2/fission-reread.exp: Ditto.
2012-06-28 * dwarf2read.c (dwarf2_cu): Add ranges_base.Doug Evans1-0/+64
Delete have_addr_base, unused. All uses updated. (init_cutu_and_read_dies): Process DW_AT_GNU_ranges_base. (dwarf2_get_pc_bounds): Add ranges_base. (dwarf2_record_block_ranges): Ditto. testsuite/ * gdb.dwarf2/fission-base.c: New file. * gdb.dwarf2/fission-base.S: New file. * gdb.dwarf2/fission-base.exp: New file.
generated by cgit v1.1 at 2025-02-22 20:44:18 +0000