| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is a single declaration of set_tdesc_osabi that is shared
between gdbserver/ and gdb/, this declaration takes a 'const char *'
argument which is the string representing an osabi.
Then in gdb/ we have an overload of set_tdesc_osabi which takes an
'enum gdb_osabi'.
In this commit I change the shared set_tdesc_osabi to be the version
which takes an 'enum gdb_osabi', and I remove the version which takes
a 'const char *'. All users of set_tdesc_osabi are updated to pass an
'enum gdb_osabi'.
The features/ code, which is generated from the xml files, requires a
new function to be added to osabi.{c,h} which can return a string
representation of an 'enum gdb_osabi'. With that new function in
place the features/ code is regenerated.
This change is being made to support the next commit. In the next
commit gdbserver will be updated to call set_tdesc_osabi in more
cases. The problem is that gdbserver stores the osabi as a string.
The issue here is that a typo in the gdbserver/ code might go
unnoticed and result in gdbserver sending back an invalid osabi
string.
To fix this we want gdbserver to pass an 'enum gdb_osabi' to the
set_tdesc_osabi function. With that requirement in place it seems to
make sense if all calls to set_tdesc_osabi pass an 'enum gdb_osabi'.
There should be no user visible changes after this commit.
Approved-By: Luis Machado <luis.machado@arm.com>
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
GDB deprecated the commands "show/set mpx bound" in GDB 15.1, as Intel
listed Intel(R) Memory Protection Extensions (MPX) as removed in 2019.
MPX is also deprecated in gcc (since v9.1), the linux kernel (since v5.6)
and glibc (since v2.35). Let's now remove MPX support in GDB completely.
This includes the removal of:
- MPX functionality including register support
- deprecated mpx commands
- i386 and amd64 implementation of the hooks report_signal_info and
get_siginfo_type
- tests
- and pretty printer.
We keep MPX register numbers to not break compatibility with old gdbservers.
Approved-By: Felix Willgerodt <felix.willgerodt@intel.com>
|
|
This commit moves aarch64_linux_memtag_matches_p,
aarch64_linux_set_memtags, aarch64_linux_get_memtag, and
aarch64_linux_memtag_to_string hooks (plus the aarch64_mte_get_atag
function used by them), along with the setting of the memtag granule
size, from aarch64-linux-tdep.c to aarch64-tdep.c, making MTE available
on baremetal targets. Since the aarch64-linux-tdep.c layer inherits
these hooks from aarch64-tdep.c, there is no effective change for
aarch64-linux targets.
Helpers used both by aarch64-tdep.c and by aarch64-linux-tdep.c were
moved from arch/aarch64-mte-linux.{c,h} to new arch/aarch64-mte.{c,h}
files.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Tested-By: Luis Machado <luis.machado@arm.com>
Approved-By: Luis Machado <luis.machado@arm.com>
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
|
|
This commit builds on the previous series of commits to share the
target description caching code between GDB and gdbserver for
x86/Linux targets.
The objective of this commit is to move the four functions (2 each of)
i386_linux_read_description and amd64_linux_read_description into the
gdb/arch/ directory and combine them so we have just a single copy of
each. Then GDB, gdbserver, and the in-process-agent (IPA) will link
against these shared functions.
One curiosity with this patch is the function
x86_linux_post_init_tdesc. On the gdbserver side the two functions
amd64_linux_read_description and i386_linux_read_description have some
functionality that is not present on the GDB side, there is some
additional configuration that is performed as each target description
is created, to setup the expedited registers.
To support this I've added the function x86_linux_post_init_tdesc.
This function is called from the two *_linux_read_description
functions, but is implemented separately for GDB and gdbserver.
An alternative approach that avoids adding x86_linux_post_init_tdesc
would be to have x86_linux_tdesc_for_tid return a non-const target
description, then in x86_target::low_arch_setup we could inspect the
target description to figure out if it is 64-bit or not, and modify
the target description as needed. In the end I think that adding the
x86_linux_post_init_tdesc function is the simpler solution.
The contents of gdbserver/linux-x86-low.cc have moved to
gdb/arch/x86-linux-tdesc-features.c, and gdbserver/linux-x86-tdesc.h
has moved to gdb/arch/x86-linux-tdesc-features.h, this change leads to
some updates in the #includes in the gdbserver/ directory.
This commit also changes how target descriptions are cached.
Previously both GDB and gdbserver used static C-style arrays to act as
the tdesc cache. This was fine, except for two problems. Either the
C-style arrays would need to be placed in x86-linux-tdesc-features.c,
which would allow us to use the x86_linux_*_tdesc_count_1() functions
to size the arrays for us, or we'd need to hard code the array sizes
using separate #defines, which we'd then have to keep in sync with the
rest of the code in x86-linux-tdesc-features.c.
Given both of these problems I decided a better solution would be to
just switch to using a std::unordered_map to act as the cache. This
will resize automatically, and we can use the xcr0 value as the key.
At first inspection, using xcr0 might seem to be a problem; after all
the {i386,amd64}_create_target_description functions take more than
just the xcr0 value. However, this patch is only for x86/Linux
targets, and for x86/Linux all of the other flags passed to the tdesc
creation functions have constant values and so are irrelevant when we
consider tdesc caching.
For testing I've done the following:
- Built on x86-64 GNU/Linux for all targets, and just for the native
target,
- Build on i386 GNU/Linux for all targets, and just for the native
target,
- Build on a 64-bit, non-x86 GNU/Linux for all targets, just for the
native target, and for targets x86_64-*-linux and i386-*-linux.
Approved-By: Felix Willgerodt <felix.willgerodt@intel.com>
|
|
This commit is part of a series to share more of the x86 target
description creation code between GDB and gdbserver.
Unlike previous commits which were mostly refactoring, this commit is
the first that makes a real change, though that change should mostly
be for gdbserver; I've largely adopted the "GDB" way of doing things
for gdbserver, and this fixes a real gdbserver bug.
On a x86-64 Linux target, running the test:
gdb.server/connect-with-no-symbol-file.exp
results in two core files being created. Both of these core files are
from the inferior process, created after gdbserver has detached.
In this test a gdbserver process is started and then, after gdbserver
has started, but before GDB attaches, we either delete the inferior
executable, or change its permissions so it can't be read. Only after
doing this do we attempt to connect with GDB.
As GDB connects to gdbserver, gdbserver attempts to figure out the
target description so that it can send the description to GDB, this
involves a call to x86_linux_read_description.
In x86_linux_read_description one of the first things we do is try to
figure out if the process is 32-bit or 64-bit. To do this we look up
the executable via the thread-id, and then attempt to read the
architecture size from the executable. This isn't going to work if
the executable has been deleted, or is no longer readable.
And so, as we can't read the executable, we default to an i386 target
and use an i386 target description.
A consequence of using an i386 target description is that addresses
are assumed to be 32-bits. Here's an example session that shows the
problems this causes. This is run on an x86-64 machine, and the test
binary (xx.x) is a standard 64-bit x86-64 binary:
shell_1$ gdbserver --once localhost :54321 /tmp/xx.x
shell_2$ gdb -q
(gdb) set sysroot
(gdb) shell chmod 000 /tmp/xx.x
(gdb) target remote :54321
Remote debugging using :54321
warning: /tmp/xx.x: Permission denied.
0xf7fd3110 in ?? ()
(gdb) show architecture
The target architecture is set to "auto" (currently "i386").
(gdb) p/x $pc
$1 = 0xf7fd3110
(gdb) info proc mappings
process 2412639
Mapped address spaces:
Start Addr End Addr Size Offset Perms objfile
0x400000 0x401000 0x1000 0x0 r--p /tmp/xx.x
0x401000 0x402000 0x1000 0x1000 r-xp /tmp/xx.x
0x402000 0x403000 0x1000 0x2000 r--p /tmp/xx.x
0x403000 0x405000 0x2000 0x2000 rw-p /tmp/xx.x
0xf7fcb000 0xf7fcf000 0x4000 0x0 r--p [vvar]
0xf7fcf000 0xf7fd1000 0x2000 0x0 r-xp [vdso]
0xf7fd1000 0xf7fd3000 0x2000 0x0 r--p /usr/lib64/ld-2.30.so
0xf7fd3000 0xf7ff3000 0x20000 0x2000 r-xp /usr/lib64/ld-2.30.so
0xf7ff3000 0xf7ffb000 0x8000 0x22000 r--p /usr/lib64/ld-2.30.so
0xf7ffc000 0xf7ffe000 0x2000 0x2a000 rw-p /usr/lib64/ld-2.30.so
0xf7ffe000 0xf7fff000 0x1000 0x0 rw-p
0xfffda000 0xfffff000 0x25000 0x0 rw-p [stack]
0xff600000 0xff601000 0x1000 0x0 r-xp [vsyscall]
(gdb) info inferiors
Num Description Connection Executable
* 1 process 2412639 1 (remote :54321)
(gdb) shell cat /proc/2412639/maps
00400000-00401000 r--p 00000000 fd:03 45907133 /tmp/xx.x
00401000-00402000 r-xp 00001000 fd:03 45907133 /tmp/xx.x
00402000-00403000 r--p 00002000 fd:03 45907133 /tmp/xx.x
00403000-00405000 rw-p 00002000 fd:03 45907133 /tmp/xx.x
7ffff7fcb000-7ffff7fcf000 r--p 00000000 00:00 0 [vvar]
7ffff7fcf000-7ffff7fd1000 r-xp 00000000 00:00 0 [vdso]
7ffff7fd1000-7ffff7fd3000 r--p 00000000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7fd3000-7ffff7ff3000 r-xp 00002000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ff3000-7ffff7ffb000 r--p 00022000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffc000-7ffff7ffe000 rw-p 0002a000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffe000-7ffff7fff000 rw-p 00000000 00:00 0
7ffffffda000-7ffffffff000 rw-p 00000000 00:00 0 [stack]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
(gdb)
Notice the difference between the mappings reported via GDB and those
reported directly from the kernel via /proc/PID/maps, the addresses of
every mapping is clamped to 32-bits for GDB, while the kernel reports
real 64-bit addresses.
Notice also that the $pc value is a 32-bit value. It appears to be
within one of the mappings reported by GDB, but is outside any of the
mappings reported from the kernel.
And this is where the problem arises. When gdbserver detaches from
the inferior we pass the inferior the address from which it should
resume. Due to the 32/64 bit confusion we tell the inferior to resume
from the 32-bit $pc value, which is not within any valid mapping, and
so, as soon as the inferior resumes, it segfaults.
If we look at how GDB (not gdbserver) figures out its target
description then we see an interesting difference. GDB doesn't try to
read the executable. Instead GDB uses ptrace to query the thread's
state, and uses this to figure out the if the thread is 32 or 64 bit.
If we update gdbserver to do it the "GDB" way then the above problem
is resolved, gdbserver now sees the process as 64-bit, and when we
detach from the inferior we give it the correct 64-bit address, and
the inferior no longer segfaults.
Now, I could just update the gdbserver code, but better, I think, to
share one copy of the code between GDB and gdbserver in gdb/nat/.
That is what this commit does.
The cores of x86_linux_read_description from gdbserver and
x86_linux_nat_target::read_description from GDB are moved into a new
file gdb/nat/x86-linux-tdesc.c and combined into a single function
x86_linux_tdesc_for_tid which is called from each location.
This new function does things mostly the GDB way, some changes are
needed to allow for the sharing; we now take some pointers for where
the shared code can cache the xcr0 and xsave layout values.
Another thing to note about this commit is how the functions
i386_linux_read_description and amd64_linux_read_description are
handled. For now I've left these function as implemented separately
in GDB and gdbserver. I've moved the declarations of these functions
into gdb/arch/{i386,amd64}-linux-tdesc.h, but the implementations are
left where they are.
A later commit in this series will make these functions shared too,
but doing this is not trivial, so I've left that for a separate
commit. Merging the declarations as I've done here ensures that
everyone implements the function to the same API, and once these
functions are shared (in a later commit) we'll want a shared
declaration anyway.
Reviewed-By: Felix Willgerodt <felix.willgerodt@intel.com>
Acked-By: John Baldwin <jhb@FreeBSD.org>
|
|
While rebasing this series[1] past this commit:
commit 4bb20a6244b7091a9a7a2ae35dfbd7e8db27550a
Date: Wed Mar 20 04:13:18 2024 -0700
gdbserver: Clear X86_XSTATE_MPX bits in xcr0 on x32
I worried that there could be other paths that might result in an xcr0
value which has X86_XSTATE_MPX set in x32 mode. As everyone
eventually calls amd64_create_target_description to build their target
description, I figured we could assert in here that if X86_XSTATE_MPX
is set then we should not be an x32 target, this will uncover any
other bugs in this area.
I'm not currently able to build/run any x32 binaries, so I have no way
to test this, but the author of commit 4bb20a6244b7091 did test this
series with that assert in place and didn't see any problems.
[1] https://inbox.sourceware.org/gdb-patches/cover.1714143669.git.aburgess@redhat.com
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31511
Approved-By: Felix Willgerodt <felix.willgerodt@intel.com>
|
|
Signed-off-by: Matt Wozniski <godlygeek@gmail.com>
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31645
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Now that defs.h, server.h and common-defs.h are included via the
`-include` option, it is no longer necessary for source files to include
them. Remove all the inclusions of these files I could find. Update
the generation scripts where relevant.
Change-Id: Ia026cff269c1b7ae7386dd3619bc9bb6a5332837
Approved-By: Pedro Alves <pedro@palves.net>
|
|
This reverts commit efba976d9713a92b4507ccfef2257e4589da2798.
|
|
While trying to merge this commit:
commit 4bb20a6244b7091a9a7a2ae35dfbd7e8db27550a
Date: Wed Mar 20 04:13:18 2024 -0700
gdbserver: Clear X86_XSTATE_MPX bits in xcr0 on x32
With this patch series of mine:
https://inbox.sourceware.org/gdb-patches/cover.1706801009.git.aburgess@redhat.com
I worried that there could be other paths that could result in an xcr0
value that has X86_XSTATE_MPX set in x32 mode. As everyone eventually
calls amd64_create_target_description to build their target
description, I figured we could assert in here that if X86_XSTATE_MPX
is set then we should not be an x32 target, this should uncover any
other bugs in this area.
I'm not currently able to build/run any x32 binaries, so I have no way
to test this.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31511
|
|
There is an assertion error "gdb_assert (n < tdesc->reg_defs.size ())"
in find_register_by_number() when gdb connects to gdbserver, this
is because the value of LOONGARCH_LINUX_NUM_GREGSET (45, which contains
10 reserved regs) is different with the number of regs (35, which not
contains 10 reserved regs) in file gdb/features/loongarch/base64.xml.
Add a new macro LOONGARCH_USED_NUM_GREGSET which is defined as 35 to
keep consistent with the gdb/features/loongarch/base64.xml, and then
define LOONGARCH_FIRST_FP_REGNUM as LOONGARCH_USED_NUM_GREGSET so that
all the reg numbers in regcache are consistent with tdesc reg numbers.
without this patch:
Execute on the target machine:
$ gdbserver 192.168.1.123:5678 ./test
Execute on the host machine:
$ gdb ./test
(gdb) target remote 192.168.1.123:5678
Output on the target machine:
Process ./test created; pid = 67683
Listening on port 5678
Remote debugging from host 192.168.1.136, port 6789
gdbserver/regcache.cc:205: A problem internal to GDBserver has been detected.
find_register_by_number: Assertion 'n < tdesc->reg_defs.size ()' failed.
Output on the host machine:
Remote debugging using 192.168.1.123:5678
Remote connection closed
Signed-off-by: Hui Li <lihui@loongson.cn>
Approved-By: John Baldwin <jhb@FreeBSD.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
Commit 92d48a1e4eac ("Add an arm-tls feature which includes the tpidruro
register from CP15.") introduced the org.gnu.gdb.arm.tls feature, which
adds the tpidruro register, and unconditionally enabled it in
aarch32_create_target_description.
In Linux, the tpidruro register isn't available via ptrace in the 32-bit
kernel but it is available for an aarch32 program running under an arm64
kernel via the ptrace compat interface. This isn't currently implemented
however, which causes GDB on arm-linux with 64-bit kernel to list the
register but show it as unavailable, as reported by Tom de Vries:
$ gdb -q -batch a.out -ex start -ex 'p $tpidruro'
Temporary breakpoint 1 at 0x512
Temporary breakpoint 1, 0xaaaaa512 in main ()
$1 = <unavailable>
Simon Marchi then clarified:
> The only time we should be seeing some "unavailable" registers or memory
> is in the context of tracepoints, for things that are not collected.
> Seeing an unavailable register here is a sign that something is not
> right.
Therefore, disable the TLS feature in aarch32 target descriptions for Linux
and NetBSD targets (the latter also doesn't seem to support accessing
tpidruro either, based on a quick look at arm-netbsd-nat.c).
This patch fixes the following tests:
Running gdb.base/inline-frame-cycle-unwind.exp ...
FAIL: gdb.base/inline-frame-cycle-unwind.exp: cycle at level 3: backtrace when the unwind is broken at frame 3
FAIL: gdb.base/inline-frame-cycle-unwind.exp: cycle at level 5: backtrace when the unwind is broken at frame 5
FAIL: gdb.base/inline-frame-cycle-unwind.exp: cycle at level 1: backtrace when the unwind is broken at frame 1
Tested with Ubuntu 22.04.3 on armv8l-linux-gnueabihf in native,
native-gdbserver and native-extended-gdbserver targets with no regressions.
PR tdep/31418
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31418
Approved-By: John Baldwin <jhb@FreeBSD.org>
|
|
No functional change
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
Loongson Binary Translation (LBT) is used to accelerate binary
translation, which contains 4 scratch registers (scr0 to scr3),
x86/ARM eflags (eflags) and x87 fpu stack pointer (ftop). This
patch support gdb to fetch/store these registers.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> # Framework
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> # Detail Optimizes
Signed-off-by: Hui Li <lihui@loongson.cn> # Error Fixes
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
Add LoongArch's vector extensions support, which including
128bit LSX (i.e., Loongson SIMD eXtension) and 256bit LASX
(i.e., Loongson Advanced SIMD eXtension). This patch support
gdb to fetch/store vector registers.
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
|
|
Right now, gdbsupport/common-regcache.h contains two abstractons for a
regcache. An opaque type `regcache` (gdb and gdbserver both have their
own regcache that is the concrete version of this) and an abstract base
class `reg_buffer_common`, that is the base of regcaches on both sides.
These abstractions allow code to be written for both gdb and gdbserver,
for instance in the gdb/arch sub-directory.
However, having two
different abstractions is impractical. If some common code has a regcache,
and wants to use an operation defined on reg_buffer_common, it can't.
It would be better to have just one. Change all instances of `regcache
*` in gdbsupport/common-regcache.h to be `reg_buffer_common *`, then fix
fallouts.
Implementations in gdb and gdbserver now need to down-cast (using
gdb::checked_static_cast) from reg_buffer_common to their concrete
regcache type. Some of them could be avoided by changing free functions
(like regcache_register_size) to be virtual methods on
reg_buffer_common. I tried it, it seems to work, but I did not include
it in this series to avoid adding unnecessary changes.
Change-Id: Ia5503adb6b5509a0f4604bd2a68b4642cc5283fd
Reviewed-by: John Baldwin <jhb@FreeBSD.org>
|
|
This changes gdb to use the C++17 [[fallthrough]] attribute rather
than special comments.
This was mostly done by script, but I neglected a few spellings and so
also fixed it up by hand.
I suspect this fixes the bug mentioned below, by switching to a
standard approach that, presumably, clang supports.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23159
Approved-By: John Baldwin <jhb@FreeBSD.org>
Approved-By: Luis Machado <luis.machado@arm.com>
Approved-By: Pedro Alves <pedro@palves.net>
|
|
SME2 defines a new 512-bit register named ZT0, and it is only available
if SME is also supported. The ZT0 state is valid only if the SVCR ZA bit
is enabled. Otherwise its contents are empty (0).
The target description is dynamic and gets generated at runtime based on the
availability of the feature.
Validated under Fast Models.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
|
|
This patch enables dumping SME state via gdb's gcore command and also
enables gdb to read SME state from a core file generated by the Linux
Kernel.
Regression-tested on aarch64-linux Ubuntu 22.04/20.04.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
|
|
The SME (Scalable Matrix Extension) [1] exposes a new matrix register ZA with
variable sizes. It also exposes a new mode called streaming mode.
Similarly to SVE, the ZA register size is dictated by a vector length, but the
SME vector length is called streaming vetor length. The total size for
ZA in a given moment is svl x svl.
In streaming mode, the SVE registers have their sizes based on svl rather than
the regular vector length (vl).
The feature detection is controlled by the HWCAP2_SME bit, but actual support
should be validated by attempting a ptrace call for one of the new register
sets: NT_ARM_ZA and NT_ARM_SSVE.
Due to its large size, the ZA register is exposed as a vector of bytes, but we
introduce a number of pseudo-registers that gives various different views
into the ZA contents. These can be arranged in a couple categories: tiles and
tile slices.
Tiles are matrices the same size or smaller than ZA. Tile slices are vectors
which map to ZA's rows/columns in different ways.
A new dynamic target description is provided containing the ZA register, the SVG
register and the SVCR register. The size of ZA, like the SVE vector registers,
is based on the vector length register SVG (VG for SVE).
This patch enables SME register support for gdb.
[1] https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/scalable-matrix-extension-armv9-a-architecture
Co-Authored-By: Ezra Sitorus <ezra.sitorus@arm.com>
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
|
|
Before actual vlen handling, fix the riscv_gdbarch_features hashing
function based on the actual valid range of vlen. In bytes, vlen is 0,
or 4 <= xlen <= 8192.
|
|
Before actual vlen handling, this commit fixes its description to allow vlen
less than 16 (but 4 or greater), to support vector subset extensions for
embedded environment ('Zve32*').
|
|
metal/kernel mode addresses
At the moment GDB only handles pointer authentication (pauth) for userspace
addresses and if we're debugging a Linux-hosted program.
The Linux Kernel can be configured to use pauth instructions for some
additional security hardening, but GDB doesn't handle this well.
To overcome this limitation, GDB needs a couple things:
1 - The target needs to advertise pauth support.
2 - The hook to remove non-address bits from a pointer needs to be registered
in aarch64-tdep.c as opposed to aarch64-linux-tdep.c.
There is a patch for QEMU that addresses the first point, and it makes
QEMU's gdbstub expose a couple more pauth mask registers, so overall we will
have up to 4 pauth masks (2 masks or 4 masks):
pauth_dmask
pauth_cmask
pauth_dmask_high
pauth_cmask_high
pauth_dmask and pauth_cmask are the masks used to remove pauth signatures
from userspace addresses. pauth_dmask_high and pauth_cmask_high masks are used
to remove pauth signatures from kernel addresses.
The second point is easily addressed by moving code around.
When debugging a Linux Kernel built with pauth with an unpatched GDB, we get
the following backtrace:
#0 __fput (file=0xffff0000c17a6400) at /repos/linux/fs/file_table.c:296
#1 0xffff8000082bd1f0 in ____fput (work=<optimized out>) at /repos/linux/fs/file_table.c:348
#2 0x30008000080ade30 [PAC] in ?? ()
#3 0x30d48000080ade30 in ?? ()
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
With a patched GDB, we get something a lot more meaningful:
#0 __fput (file=0xffff0000c1bcfa00) at /repos/linux/fs/file_table.c:296
#1 0xffff8000082bd1f0 in ____fput (work=<optimized out>) at /repos/linux/fs/file_table.c:348
#2 0xffff8000080ade30 [PAC] in task_work_run () at /repos/linux/kernel/task_work.c:179
#3 0xffff80000801db90 [PAC] in resume_user_mode_work (regs=0xffff80000a96beb0) at /repos/linux/include/linux/resume_user_mode.h:49
#4 do_notify_resume (regs=regs@entry=0xffff80000a96beb0, thread_flags=4) at /repos/linux/arch/arm64/kernel/signal.c:1127
#5 0xffff800008fb9974 [PAC] in prepare_exit_to_user_mode (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:137
#6 exit_to_user_mode (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:142
#7 el0_svc (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:638
#8 0xffff800008fb9d34 [PAC] in el0t_64_sync_handler (regs=<optimized out>) at /repos/linux/arch/arm64/kernel/entry-common.c:655
#9 0xffff800008011548 [PAC] in el0t_64_sync () at /repos/linux/arch/arm64/kernel/entry.S:586
Backtrace stopped: Cannot access memory at address 0xffff80000a96c0c8
|
|
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
|
|
PR gdb/28947
The address_significant gdbarch setting was introduced as a way to remove
non-address bits from pointers, and it is specified by a constant. This
constant represents the number of address bits in a pointer.
Right now AArch64 is the only architecture that uses it, and 56 was a
correct option so far.
But if we are using Pointer Authentication (PAuth), we might use up to 2 bytes
from the address space to store the required information. We could also have
cases where we're using both PAuth and MTE.
We could adjust the constant to 48 to cover those cases, but this doesn't
cover the case where GDB needs to sign-extend kernel addresses after removal
of the non-address bits.
This has worked so far because bit 55 is used to select between kernel-space
and user-space addresses. But trying to clear a range of bits crossing the
bit 55 boundary requires the hook to be smarter.
The following patch renames the gdbarch hook from significant_addr_bit to
remove_non_address_bits and passes a pointer as opposed to the number of
bits. The hook is now responsible for removing the required non-address bits
and sign-extending the address if needed.
While at it, make GDB and GDBServer share some more code for aarch64 and add a
new arch-specific testcase gdb.arch/aarch64-non-address-bits.exp.
Bug-url: https://sourceware.org/bugzilla/show_bug.cgi?id=28947
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
With the AArch64 Scalable Matrix Extension we have a new TPIDR2 register, and
it will be added to the existing NT_ARM_TLS register set. Kernel patches are
being reviewed here:
https://lore.kernel.org/linux-arm-kernel/20220818170111.351889-1-broonie@kernel.org/
From GDB's perspective, we handle it in a similar way to the existing TPIDR
register. But we need to consider cases of systems that only have TPIDR and
systems that have both TPIDR and TPIDR2.
With that in mind, the following patch adds the required code to support
TPIDR2 and turns the org.gnu.gdb.aarch64.tls feature into a
dynamically-generated target description as opposed to a static target
description containing only TPIDR.
That means we can remove the gdb/features/aarch64-tls.xml file and replace the
existing gdb/features/aarch64-tls.c auto-generated file with a new file that
dynamically generates the target description containing either TPIDR alone or
TPIDR and TPIDR2.
In the future, when *BSD's start to support this register, they can just
enable it as is being done for the AArch64 Linux target.
The core file read/write code has been updated to support TPIDR2 as well.
On GDBserver's side, there is a small change to the find_regno function to
expose a non-throwing version of it.
It always seemed strange to me how find_regno causes the whole operation to
abort if it doesn't find a particular register name. The patch moves code
from find_regno into find_regno_no_throw and makes find_regno call
find_regno_no_throw instead.
This allows us to do register name lookups to find a particular register
number without risking erroring out if nothing is found.
The patch also adjusts the feature detection code for aarch64-fbsd, since
the infrastructure is shared amongst all aarch64 targets. I haven't added
code to support TPIDR2 in aarch64-fbsd though, as I'm not sure when/if
that will happen.
|
|
Currently, every internal_error call must be passed __FILE__/__LINE__
explicitly, like:
internal_error (__FILE__, __LINE__, "foo %d", var);
The need to pass in explicit __FILE__/__LINE__ is there probably
because the function predates widespread and portable variadic macros
availability. We can use variadic macros nowadays, and in fact, we
already use them in several places, including the related
gdb_assert_not_reached.
So this patch renames the internal_error function to something else,
and then reimplements internal_error as a variadic macro that expands
__FILE__/__LINE__ itself.
The result is that we now should call internal_error like so:
internal_error ("foo %d", var);
Likewise for internal_warning.
The patch adjusts all calls sites. 99% of the adjustments were done
with a perl/sed script.
The non-mechanical changes are in gdbsupport/errors.h,
gdbsupport/gdb_assert.h, and gdb/gdbarch.py.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06
|
|
Read LSPEN, ASPEN and LSPACT bits from FPCCR and use them together
with FPCAR to identify if lazy FPU state preservation is active for
the current frame. See "Lazy context save of FP state", in B1.5.7,
also ARM AN298, supported by Cortex-M4F architecture for details on
lazy FPU register stacking. The same conditions are valid for other
Cortex-M cores with FPU.
This patch has been verified on a STM32F4-Discovery board by:
a) writing a non-zero value (lets use 0x1122334455667788 as an
example) to all the D-registers in the main function
b) configured the SysTick to fire
c) in the SysTick_Handler, write some other value (lets use
0x0022446688aaccee as an example) to one of the D-registers (D0 as
an example) and then do "SVC #0"
d) in the SVC_Handler, write some other value (lets use
0x0099aabbccddeeff) to one of the D-registers (D0 as an example)
In GDB, suspend the execution in the SVC_Handler function and compare
the value of the D-registers for the SVC_handler frame and the
SysTick_Handler frame. With the patch, the value of the modified
D-register (D0) should be the new value (0x009..eff) on the
SVC_Handler frame, and the intermediate value (0x002..cee) for the
SysTick_Handler frame. Now compare the D-register value for the
SysTick_Handler frame and the main frame. The main frame should
have the initial value (0x112..788).
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
Signed-off-by: Yvan ROUX <yvan.roux@foss.st.com>
|
|
This patch changes various global target_desc declarations to const, thereby
correcting a prominent source of ODR violations in PowerPC-related target code.
The majority of files/changes are mechanical const-ifications accomplished by
regenerating the C files in features/.
This also required manually updating mips-linux-tdep.h, s390-linux-tdep.h,
nios2-tdep.h, s390-tdep.h, arch/ppc-linux-tdesc.h, arch/ppc-linux-common.c,
and rs6000-tdep.c.
Patch tested against the sourceware trybot, and fully regression tested against
our (Red Hat's) internal test infrastructure on Rawhide aarch64, s390x, x86_64,
and powerpcle.
With this patch, I can finally enable LTO in our GDB package builds. [Tested
with a rawhide scratch build containing this patch.]
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24835
|
|
Add cskyv2-linux.xml for re-generating cskyv2-linux.c if needed.
Also update cskyv2-linux.c.
|
|
Add new files:
gdb/arch/csky.c
gdb/arch/csky.h
gdb/features/cskyv2-linux.c
gdbserver/linux-csky-low.cc
1. In gdb/arch/csky.c file, add function "csky_create_target_description()"
for csky_target::low_arch_setup(). later, it can be used for csky native gdb.
2. In gdb/features/cskyv2-linux.c file, create target_tdesc for csky, include
gprs, pc, hi, lo, float, vector and float control registers.
3. In gdbserver/linux-csky-low.cc file, using PTRACE_GET/SET_RGESET to
get/set registers. The main data structures in asm/ptrace.h are:
struct pt_regs {
unsigned long tls;
unsigned long lr;
unsigned long pc;
unsigned long sr;
unsigned long usp;
/*
* a0, a1, a2, a3:
* r0, r1, r2, r3
*/
unsigned long orig_a0;
unsigned long a0;
unsigned long a1;
unsigned long a2;
unsigned long a3;
/*
* r4 ~ r13
*/
unsigned long regs[10];
/* r16 ~ r30 */
unsigned long exregs[15];
unsigned long rhi;
unsigned long rlo;
unsigned long dcsr;
};
struct user_fp {
unsigned long vr[96];
unsigned long fcr;
unsigned long fesr;
unsigned long fid;
unsigned long reserved;
};
|
|
First, some background on the RISC-V registers fflags, frm, and fcsr.
These three registers all relate to the floating-point status and
control mechanism on RISC-V. The fcsr is the floatint-point control
status register, and consists of two parts, the flags (bits 0 to 4)
and the rounding-mode (bits 5 to 7).
The fcsr register is just one of many control/status registers (or
CSRs) available on RISC-V. The fflags and frm registers are also
CSRs. These CSRs are aliases for the relevant parts of the fcsr
register. So fflags is an alias for bits 0 to 4 of fcsr, and frm is
an alias for bits 5 to 7 of fcsr.
This means that a user can change the floating-point rounding mode
either, by writing a complete new value into fcsr, or by writing just
the rounding mode into frm.
How this impacts on GDB is like this: a target description could,
legitimately include all three registers, fcsr, fflags, and frm. The
QEMU target currently does this, and this makes sense. The target is
emulating the complete system, and has all three CSRs available, so
why not tell GDB about this.
In contrast, the RISC-V native Linux target only has access to the
fcsr. This is because the ptrace data structure that the kernel uses
for reading and writing floating point state only contains a copy of
the fcsr, after all, this one field really contains both the fflags
and frm fields, so why carry around duplicate data.
So, we might expect that the target description for the RISC-V native
Linux GDB would only contain the fcsr register. Unfortunately, this
is not the case. The RISC-V native Linux target uses GDB's builtin
target descriptions by calling riscv_lookup_target_description, this
will then add an fpu feature from gdb/features/riscv, either
32bit-fpu.xml or 64bit-fpu.xml. The problem, is that these features
include an entry for fcsr, fflags, and frm. This means that GDB
expects the target to handle reading and writing these registers. And
the RISC-V native Linux target currently doesn't.
In riscv_linux_nat_target::store_registers and
riscv_linux_nat_target::fetch_registers only the fcsr register is
handled, this means that, for RISC-V native Linux, the fflags and frm
registers always show up as <unavailable> - they are present in the
target description, but the target doesn't know how to access the
registers.
A final complication relating to these floating pointer CSRs is which
target description feature the registers appear in.
These registers are CSRs, so it would seem sensible that these
registers should appear in the CSR target description feature.
However, when I first added RISC-V target description support, I was
using a RISC-V simulator that didn't support any CSRs other than the
floating point related ones. This simulator bundled all the float
related CSRs into the fpu target feature. This didn't feel completely
unreasonable to me, and so I had GDB check for these registers in
either target feature.
In this commit I make some changes relating to how GDB handles the
three floating point CSR:
1. Remove fflags and frm from 32bit-fpu.xml and 64bit-fpu.xml. This
means that the default RISC-V target description (which RISC-V native
FreeBSD), and the target descriptions created for RISC-V native Linux,
will not include these registers. There's nothing stopping some other
target (e.g. QEMU) from continuing to include all three of these CSRs,
the code in riscv-tdep.c continues to check for all three of these
registers, and will handle them correctly if they are present.
2. If a target supplied fcsr, but does not supply fflags and/or frm,
then RISC-V GDB will now create two pseudo registers in order to
emulate the two missing CSRs. These new pseudo-registers do the
obvious thing of just reading and writing the fcsr register.
3. With the new pseudo-registers we can no longer make use of the GDB
register numbers RISCV_CSR_FFLAGS_REGNUM and RISCV_CSR_FRM_REGNUM.
These will be the numbers used if the target supplies the registers in
its target description, but, if GDB falls back to using
pseudo-registers, then new, unique numbers will be used. To handle
this I've added riscv_gdbarch_tdep::fflags_regnum and
riscv_gdbarch_tdep::frm_regnum, I've then updated the RISC-V code to
compare against these fields.
When adding the pseudo-register support, it is important that the
pseudo-register numbers are calculated after the call to
tdesc_use_registers. This is because we don't know the total number
of physical registers until after this call, and the psuedo-register
numbers must follow on from the real (target supplied) registers.
I've updated some tests to include more testing of the fflags and frm
registers, as well as adding a new test.
|
|
The current implementation of the fcc register is referenced to the
user_fp_state structure of the kernel uapi [1].
struct user_fp_state {
uint64_t fpr[32];
uint64_t fcc;
uint32_t fcsr;
};
But it is mistakenly defined as a 64-bit fputype register, resulting
in a confusing output of "info register".
(gdb) info register
...
fcc {f = 0x0, d = 0x0} {f = 0, d = 0}
...
According to "Condition Flag Register" in "LoongArch Reference Manual"
[2], there are 8 condition flag registers of size 1. Use 8 registers of
uint8 to make it easier for users to view the fcc register groups.
(gdb) info register
...
fcc0 0x1 1
fcc1 0x0 0
fcc2 0x0 0
fcc3 0x0 0
fcc4 0x0 0
fcc5 0x0 0
fcc6 0x0 0
fcc7 0x0 0
...
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/loongarch/include/uapi/asm/ptrace.h
[2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_condition_flag_register
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
Teach GDB how to dump memory tags for AArch64 when using the gcore command
and how to read memory tag data back from a core file generated by GDB
(via gcore) or by the Linux kernel.
The format is documented in the Linux Kernel documentation [1].
Each tagged memory range (listed in /proc/<pid>/smaps) gets dumped to its
own PT_AARCH64_MEMTAG_MTE segment. A section named ".memtag" is created for each
of those segments when reading the core file back.
To save a little bit of space, given MTE tags only take 4 bits, the memory tags
are stored packed as 2 tags per byte.
When reading the data back, the tags are unpacked.
I've added a new testcase to exercise the feature.
Build-tested with --enable-targets=all and regression tested on aarch64-linux
Ubuntu 20.04.
[1] Documentation/arm64/memory-tagging-extension.rst (Core Dump Support)
|
|
This commit adds floating-point support for LoongArch gdb.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
It should be ARCH_AARCH64_MTE_LINUX_H as opposed to ARCH_AARCH64_LINUX_H.
|
|
Move "enum loongarch_regnum" to gdb/arch/loongarch.h so that the
macro definitions can be used in gdbserver/linux-loongarch-low.cc
to simplify the code.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
The FPCCR.TS bit is used to identify if FPU registers are considered
non-secure or secure. If they are secure, then callee saved registers
(S16 to S31) are stacked on exception entry or otherwise skipped.
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
Signed-off-by: Yvan Roux <yvan.roux@foss.st.com>
|
|
Implement LoongArch/Linux support, including XML target description
handling based on features determined, GPR regset support, and software
breakpoint handling.
In the Linux kernel code of LoongArch, ptrace implements PTRACE_POKEUSR
and PTRACE_PEEKUSR in the arch_ptrace function, so srv_linux_usrregs is
set to yes.
With this patch on LoongArch:
$ make check-gdb TESTS="gdb.server/server-connect.exp"
[...]
# of expected passes 18
[...]
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
Move the specialization into an explicit std namespace to workaround a
bug in older compilers. GCC 6.4.1 at least fails to compile the previous
version with the following error:
gdb/arch/aarch64.h:48:13: error: specialization of 'template<class _Tp> struct std::hash' in different namespace [-fpermissive]
struct std::hash<aarch64_features>
|
|
Replace the sve bool member of aarch64_features with a vq member that
holds the vector quotient. It is zero if SVE is not present.
Add std::hash<> specialization and operator== so that aarch64_features
can be used as a key with std::unordered_map<>.
Change the various functions that create or lookup aarch64 target
descriptions to accept a const aarch64_features object rather than a
growing number of arguments.
Replace the multi-dimension tdesc_aarch64_list arrays used to cache
target descriptions with unordered_maps indexed by aarch64_feature.
|
|
|
|
|
|
This patch removes the hardcoded access to PSP in
arm_m_exception_cache() and relies on the definition with the XML
descriptions.
Signed-off-by: Christophe Lyon <christophe.lyon@foss.st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@arm.com>
|
|
This set of changes enable support for the ARMv8.1-m PACBTI extensions [1].
The goal of the PACBTI extensions is similar in scope to that of a-profile
PAC/BTI (aarch64 only), but the underlying implementation is different.
One important difference is that the pointer authentication code is stored
in a separate register, thus we don't need to mask/unmask the return address
from a function in order to produce a correct backtrace.
The patch introduces the following modifications:
- Extend the prologue analyser for 32-bit ARM to handle some instructions
from ARMv8.1-m PACBTI: pac, aut, pacg, autg and bti. Also keep track of
return address signing/authentication instructions.
- Adds code to identify object file attributes that indicate the presence of
ARMv8.1-m PACBTI (Tag_PAC_extension, Tag_BTI_extension, Tag_PACRET_use and
Tag_BTI_use).
- Adds support for DWARF pseudo-register RA_AUTH_CODE, as described in the
aadwarf32 [2].
- Extends the dwarf unwinder to track the value of RA_AUTH_CODE.
- Decorates backtraces with the "[PAC]" identifier when a frame has signed
the return address.
- Makes GDB aware of a new XML feature "org.gnu.gdb.arm.m-profile-pacbti". This
feature is not included as an XML file on GDB's side because it is only
supported for bare metal targets.
- Additional documentation.
[1] https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/armv8-1-m-pointer-authentication-and-branch-target-identification-extension
[2] https://github.com/ARM-software/abi-aa/blob/main/aadwarf32/aadwarf32.rst
|
|
1. Since 32bit-pkeys.xml and 64bit-pkeys.xml are identical, consolidate
them into a single keys.xml.
2. Enable PKU for x32 to fix:
$ gdbserver :123456 x32-program
...
.../gdbserver/regcache.cc:255: A problem internal to GDBserver has been detected
.
Unknown register pkru requested
on Tiger Lake.
|
|
This commit adds initial target description support for LoongArch.
Signed-off-by: Zhensong Liu <liuzhensong@loongson.cn>
Signed-off-by: Qing zhang <zhangqing@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
Change gdb_assert_not_reached to accept a format string plus
corresponding arguments. This allows giving more precise messages.
Because the format string passed by the caller is prepended with a "%s:"
to add the function name, the callers can no longer pass a translated
string (`_(...)`). Make the gdb_assert_not_reached include the _(),
just like the gdb_assert_fail macro just above.
Change-Id: Id0cfda5a57979df6cdaacaba0d55dd91ae9efee7
|
