diff options
Diffstat (limited to 'gdb/testsuite/gdb.trace/report.exp')
| -rw-r--r-- | gdb/testsuite/gdb.trace/report.exp | 421 |
1 files changed, 0 insertions, 421 deletions
diff --git a/gdb/testsuite/gdb.trace/report.exp b/gdb/testsuite/gdb.trace/report.exp deleted file mode 100644 index 4df17e1..0000000 --- a/gdb/testsuite/gdb.trace/report.exp +++ /dev/null @@ -1,421 +0,0 @@ -# Copyright (C) 1998 Free Software Foundation, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu - -# This file was written by Michael Snyder (msnyder@cygnus.com) - -load_lib "trace-support.exp"; - -if $tracelevel then { - strace $tracelevel -} - -set prms_id 0 -set bug_id 0 - -gdb_exit -gdb_start - -if [istarget "m68k-*-elf"] then { - load_lib "emc-support.exp"; - set srcfile gdb_c_test.c - set binfile [board_info target d490_binfile]; - gdb_test "set remotetimeout 6" "" "" - set timeout 500 - gdb_target_monitor $binfile - # Give a TSTOP and ignore errors, to make sure any previous trace is off - gdb_test "tstop" "" "" - gdb_test "tfind none" "" "" - send_gdb "compare-sections CS\n" - gdb_expect { - -re "MIS-MATCHED.*$gdb_prompt $" { - gdb_suppress_entire_file "Symbol file does not match target! - all tests in this module will fail."; - } - -re ".*$gdb_prompt $" { } - } -} else { - set testfile "actions" - set srcfile ${testfile}.c - set binfile $objdir/$subdir/$testfile - if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \ - executable {debug additional_flags="-gdwarf"}] != "" } { - gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." - } - gdb_load $binfile - gdb_test "tstop" "" "" - gdb_test "tfind none" "" "" - runto_main -} -gdb_reinitialize_dir $srcdir/$subdir - -# We generously give ourselves one "pass" if we successfully -# detect that this test cannot be run on this target! -if { ![gdb_target_supports_trace] } then { - pass "Current target does not supporst trace" - return 1; - -} - -set cr "\[\r\n\]+" - -# If testing on a remote host, download the source file. -remote_download host $srcdir/$subdir/$srcfile - -# -# test general reporting of trace experiment results -# - -set testline1 0 -set testline2 0 -set testline3 0 -set testline4 0 -set testline5 0 -set testline6 0 - -set arg1 1 -set arg2 2 -set arg3 3 -set arg4 4 -set arg5 5 -set arg6 6 - -set gdb_recursion_test_baseline [gdb_find_recursion_test_baseline $srcfile]; -if { $gdb_recursion_test_baseline == -1 } { - fail "Could not find gdb_recursion_test function" - return; -} - -send_gdb "list $gdb_recursion_test_baseline, +12\n" -gdb_expect { - -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 1 " { - set testline1 $expect_out(1,string) - exp_continue - } - -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 2 " { - set testline2 $expect_out(1,string) - exp_continue - } - -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 3 " { - set testline3 $expect_out(1,string) - exp_continue - } - -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 4 " { - set testline4 $expect_out(1,string) - exp_continue - } - -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 5 " { - set testline5 $expect_out(1,string) - exp_continue - } - -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 6 " { - set testline6 $expect_out(1,string) - exp_continue - } - -re ".*$gdb_prompt $" { - if { ($testline1 == 0) || ($testline2 == 0) || ($testline3 == 0) || ($testline4 == 0) || ($testline5 == 0) || ($testline6 == 0) } { - gdb_suppress_entire_file "failed to locate test source lines: -all tests in this module will fail." - } - } - default { - gdb_suppress_entire_file "failed to locate test source lines (def): -all tests in this module will fail." - } -} - -# -# Setup trace experiment. This will involve: -# 1) a tracepoint where nothing is collected -# 2) a tracepoint where only regs are collected -# 3) a tracepoint where only args are collected -# 4) a tracepoint where only locals are collected -# 5) a tracepoint where some amount of stack memory is collected. -# 6) a tracepoint where some expressions are collected. -# - -gdb_delete_tracepoints -set tdp1 [gdb_gettpnum $testline1] -set tdp2 [gdb_gettpnum $testline2] -set tdp3 [gdb_gettpnum $testline3] -set tdp4 [gdb_gettpnum $testline4] -set tdp5 [gdb_gettpnum $testline5] -set tdp6 [gdb_gettpnum $testline6] - -if { $tdp1 <= 0 || $tdp2 <= 0 || $tdp3 <= 0 || \ - $tdp4 <= 0 || $tdp5 <= 0 || $tdp6 <= 0 } then { - fail "setting tracepoints failed" - return; -} - -gdb_trace_setactions "9.x: setup TP to collect regs" \ - "$tdp2" \ - "collect \$regs" "^$" - - -gdb_trace_setactions "9.x: setup TP to collect args" \ - "$tdp3" \ - "collect \$args" "^$" - -gdb_trace_setactions "9.x: setup TP to collect locals" \ - "$tdp4" \ - "collect \$locs" "^$" - -gdb_trace_setactions "9.x: setup TP to collect stack memory" \ - "$tdp5" \ - "collect \$fp, \*\(void \*\*\) \$sp @ 64" "^$" - -gdb_trace_setactions "9.x: setup TP to collect expressions" \ - "$tdp6" \ - "collect gdb_char_test, gdb_short_test, gdb_long_test" "^$" - -gdb_test "tstart" "" "" - -if [istarget "m68k-*-elf"] then { - gdb_emclaptop_command "85,$arg1,$arg2,$arg3,$arg4,$arg5,$arg6" - sleep 5 - -} else { - gdb_test "break end" "" "" - gdb_test "continue" \ - "Continuing.*Breakpoint $decimal, end.*" \ - "run trace experiment" -} - -gdb_test "tstop" "" "" - -# -# 9.1 test the tdump command -# - -set timeout 60 - -gdb_tfind_test "9.1: init: make sure not debugging any trace frame" "none" "-1" - -gdb_tfind_test "9.1: find frame for TP $tdp1" "tracepoint $tdp1" \ - "\$tracepoint" "$tdp1" - -# Nothing was collected at tdp1, so this tdump should be empty. -gdb_test "tdump" \ - "Data collected at tracepoint $tdp1, trace frame $decimal:" \ - "9.1: tdump, nothing collected" - -gdb_tfind_test "9.1: find frame for TP $tdp2" "tracepoint $tdp2" \ - "\$tracepoint" "$tdp2" - -# regs were collected at tdp2. -# How to match for the output of "info registers" on an unknown architecture? -# For now, assume that every architecture has a register called "pc". -gdb_test "tdump" \ - "\[\r\n\]pc .*" \ - "9.1: tdump, regs collected" - -gdb_tfind_test "9.1: find frame for TP $tdp3" "tracepoint $tdp3" \ - "\$tracepoint" "$tdp3" - -# args were collected at tdp3 -gdb_test "tdump" \ - "depth = 3.*q1 = 2.*q2 = 2.*q3 = 3.*q4 = 4.*q5 = 5.*q6 = 6" \ - "9.1: tdump, args collected" - -gdb_tfind_test "9.1: find frame for TP $tdp4" "tracepoint $tdp4" \ - "\$tracepoint" "$tdp4" - -# locals were collected at tdp4 -gdb_test "tdump" \ - "q = 1" \ - "9.1: tdump, locals collected" - -gdb_tfind_test "9.1: find frame for TP $tdp5" "tracepoint $tdp5" \ - "\$tracepoint" "$tdp5" - -# stack was collected at tdp5, plus the frame pointer -gdb_test "tdump" \ - ".fp = .*sp @ 64 = .*" \ - "9.1: tdump, memrange collected" - -gdb_tfind_test "9.1: find frame for TP $tdp6" "tracepoint $tdp6" \ - "\$tracepoint" "$tdp6" - -# globals were collected at tdp6 -gdb_test "tdump" \ - "gdb_char_test = 1.*gdb_short_test = 2.*gdb_long_test = 3" \ - "9.1: tdump, global variables collected" - -# 9.2 test tdump with arguments -# [no go, tdump doesn't have any arguments] - -# 9.3 help tdump - -gdb_test "help tdump" "Print everything collected at the current.*" \ - "9.3: help tdump" - -set linecount1 0 -set linecount2 0 -set linecount3 0 -set linecount4 0 -set linecount5 0 -set linecount6 0 - -gdb_tfind_test "11.x, 12.1: find start frame" "start" "0" - -# -# 11.x test built-in trace variables $trace_frame, $trace_line etc. -# - -gdb_test "printf \"x %d x\\n\", \$trace_frame" "x 0 x" \ - "11.1: test \$trace_frame" - -gdb_test "printf \"x %d x\\n\", \$tracepoint" "x $tdp1 x" \ - "11.2: test \$tracepoint" - -gdb_test "printf \"x %d x\\n\", \$trace_line" "x $testline1 x" \ - "11.3: test \$trace_line" - -send_gdb "print \$trace_file\n" -gdb_expect { - -re "\\$\[0-9\]+ = \"$srcfile\"\[\r\n\]+$gdb_prompt $" { - pass "11.4: test \$trace_file" - } - -re "\\$\[0-9\]+ = \"$srcdir/$subdir/$srcfile\"\[\r\n\]+$gdb_prompt $" { - pass "11.4: test \$trace_file" - } - -re "$gdb_prompt $" { - fail "11.4: test \$trace_file" - } - timeout { - fail "11.4: test \$trace_file (timeout)" - } -} - -#gdb_test "print \$trace_file" "\"$srcdir/$subdir/$srcfile\"" \ -# "11.4: test \$trace_file" - -# -# 12.x test report generation using arbitrary GDB commands, loops etc. -# - -send_gdb "while \$trace_frame != -1\n output \$trace_file\n printf \", line \%d \(tracepoint #\%d\)\\n\", \$trace_line, \$tracepoint\n tfind\n end\n" -gdb_expect { - -re " line $testline1 .tracepoint .$tdp1" { - set linecount1 [expr $linecount1 + 1] - exp_continue - } - -re " line $testline2 .tracepoint .$tdp2" { - set linecount2 [expr $linecount2 + 1] - exp_continue - } - -re " line $testline3 .tracepoint .$tdp3" { - set linecount3 [expr $linecount3 + 1] - exp_continue - } - -re " line $testline4 .tracepoint .$tdp4" { - set linecount4 [expr $linecount4 + 1] - exp_continue - } - -re " line $testline5 .tracepoint .$tdp5" { - set linecount5 [expr $linecount5 + 1] - exp_continue - } - -re " line $testline6 .tracepoint .$tdp6" { - set linecount6 [expr $linecount6 + 1] - exp_continue - } - -re ".*$gdb_prompt $" { - if { ($linecount1 < 4) || ($linecount2 < 4) || ($linecount3 < 4) || ($linecount4 < 4) || ($linecount5 < 4) || ($linecount6 < 4) } { - fail "12.1: trace report #1" - } else { - pass "12.1: trace report #1" - } - } - timeout { - fail "12.1: trace report #1 (timeout)" - } -} - -gdb_tfind_test "12.2: find first TDP #2 frame" "tracepoint $tdp2" \ - "\$tracepoint" "$tdp2" - -set linecount2 0 - -send_gdb "while \$trace_frame != -1\n printf \"tracepoint #\%d, FP 0x\%08x, SP 0x\%08x, PC 0x%08x\\n\", \$tracepoint, \$fp, \$sp, \$pc\n tfind tracepoint\n end\n" -gdb_expect { - -re "tracepoint #$tdp2, FP $hex, SP $hex, PC $hex" { - set linecount2 [expr $linecount2 + 1] - exp_continue - } - -re ".*$gdb_prompt $" { - if { ($linecount2 < 4) } { - fail "12.2: trace report #2" - } else { - pass "12.2: trace report #2" - } - } - timeout { - fail "12.2: trace report #2 (timeout)" - } -} - -gdb_tfind_test "12.3: find first TDP #3 frame" "tracepoint $tdp3" \ - "\$tracepoint" "$tdp3" - -set linecount3 0 - -send_gdb "while \$trace_frame != -1\n printf \"TDP #\%d, frame \%d: depth = \%d, q1 = \%d\\n\", \$tracepoint, \$trace_frame, depth, q1\n tfind tracepoint\n end\n" -gdb_expect { - -re "TDP #$tdp3, frame $decimal: depth = $decimal, q1 = $decimal" { - set linecount3 [expr $linecount3 + 1] - exp_continue - } - -re ".*$gdb_prompt $" { - if { ($linecount3 < 4) } { - fail "12.3: trace report #3" - } else { - pass "12.3: trace report #3" - } - } - timeout { - fail "12.3: trace report #3 (timeout)" - } -} - -gdb_tfind_test "12.4: find first TDP #6 frame" "tracepoint $tdp6" \ - "\$tracepoint" "$tdp6" - -set linecount6 0 - -send_gdb "while \$trace_frame != -1\n printf \"TDP #\%d, frame %d: char_test = \%d, long_test = \%d\\n\", \$tracepoint, \$trace_frame, gdb_char_test, gdb_long_test\n tfind tracepoint\n end\n" -gdb_expect { - -re "TDP #$tdp6, frame $decimal: char_test = $arg1, long_test = $arg3" { - set linecount6 [expr $linecount6 + 1] - exp_continue - } - -re ".*$gdb_prompt $" { - if { ($linecount6 < 4) } { - fail "12.4: trace report #4" - } else { - pass "12.4: trace report #4" - } - } - timeout { - fail "12.4: trace report #4 (timeout)" - } -} - -# Finished! -gdb_tfind_test "finished: make sure not debugging any trace frame" "none" "-1" |