diff options
Diffstat (limited to 'gdb/testsuite/gdb.base/setshow.exp')
| -rw-r--r-- | gdb/testsuite/gdb.base/setshow.exp | 237 |
1 files changed, 0 insertions, 237 deletions
diff --git a/gdb/testsuite/gdb.base/setshow.exp b/gdb/testsuite/gdb.base/setshow.exp deleted file mode 100644 index 60736f3..0000000 --- a/gdb/testsuite/gdb.base/setshow.exp +++ /dev/null @@ -1,237 +0,0 @@ -# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu - -# This file was written by Michael Snyder (msnyder@cygnus.com) - -if $tracelevel then { - strace $tracelevel -} - -set prms_id 0 -set bug_id 0 - -set testfile "setshow" -set srcfile ${srcdir}/${subdir}/${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} -if { [gdb_compile ${srcfile} ${binfile} executable {debug}] != "" } { - perror "Couldn't compile ${srcfile}" - return -1 -} - -# Start with a fresh gdb - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# -# Test gdb set and show commands. -# Add tests here for show and set that don't fit neatly elsewhere. -# FIXME: many rudimentary tests for set and show commands have been -# added below, but most do nothing more than check that a -# variable has been set successfully, ie. they do not test -# whether setting the variable has had the desired effect. -# - -#test default annotation_level is 0 -gdb_test "show annotate" "Annotation_level is 0..*" "default annotation_level is zero" - -#test set annotate 2 -send_gdb "set annotate 2\n" -gdb_expect { - -re ".*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \ - { pass "set annotate 2" } - -re ".*$gdb_prompt $" { fail "set annotate 2" } - timeout { fail "(timeout) set annotate 2" } - } - -send_gdb "show annotate\n" -gdb_expect { - -re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \ - { pass "show annotate (2)" } - -re ".*$gdb_prompt $" { fail "show annotate (2)" } - timeout { fail "(timeout) show annotate (2)" } - } - -#test annotation_level 2 -send_gdb "info line 1\n" -gdb_expect { - -re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \ - { pass "annotation_level 2" } - -re ".*$gdb_prompt $" { fail "annotation_level 2" } - timeout { fail "(timeout) annotation_level 2" } - } - -#test set annotate 1 -gdb_test "set annotate 1" ".*post-prompt.*" "set annotate 1" -gdb_test "show annotate" "Annotation_level is 1..*" "show annotate (1)" -#test annotation_level 1 -gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*" "annotation_level 1" -#test set annotate 0 -gdb_test "set annotate 0" "" "set annotate 0" -gdb_test "show annotate" "Annotation_level is 0..*" "show annotate (0)" -#test annotation_level 0 -gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*" "annotation_level 0" -#test set args -gdb_test "set args foo bar blup baz bubble" "" "set args" -#test show args -gdb_test "show args" "Arguments to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args" - -# Don't test if we can't pass args or if we're using a stub. -if { ![target_info exists gdb,use_stub] && ![target_info exists noargs] } { - #test passing args - gdb_test "run" "Starting program:.*foo bar blup baz bubble.*" "passing args" -} -#test set check range on -gdb_test "set check range on" "" "set check range on" -#test show check range on -gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)" -#test set check range auto -gdb_test "set check range auto" "" "set check range auto" -#test show check range auto -gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)" -#test set check type on -gdb_test "set check type on" "" "set check type on" -#test show check type on -gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)" -#test set check type auto -gdb_test "set check type auto" "" "set check type auto" -#test show check type -gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)" -#test set complaints 100 -gdb_test "set complaints 100" "" "set complaints 100" -#test show complaints 100 -gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)" -#test set complaints 0 -gdb_test "set complaints 0" "" "set complaints 0" -#test show complaints 0 -gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)" -#test set confirm off -gdb_test "set confirm off" "" "set confirm off" -#test show confirm off -gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)" -#test set confirm on -gdb_test "set confirm on" "" "set confirm on" -#test show confirm on -gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)" -#test set editing off -gdb_test "set editing off" "" "set editing off" -#test show editing off -gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)" -#test set editing on -#gdb_test "set editing on" "" "set editing on" -#test show editing on -#gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)" -#test set environment FOOBARBAZ -gdb_test "set environment FOOBARBAZ = grbxgrbxgrbx" "" "set environment FOOBARBAZ" -#test show environment FOOBARBAZ -gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*" "show environment FOOBARBAZ" -#test set height 100 -gdb_test "set height 100" "" "set height 100" -#test show height 100 -gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height" -#test set history expansion on -gdb_test "set history expansion on" "" "set history expansion on" -#test show history expansion on -gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion" -#test set history filename foobar.baz -gdb_test "set history filename foobar.baz" "" "set history filename foobar.baz" -#test show history filename foobar.baz -gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*" "show history filename (foobar.baz)" -#test set history save on -gdb_test "set history save on" "" "set history save on" -#test show history save on -gdb_test "show history save" "Saving of the history record on exit is on..*" "show history save (on)" -#test set history size 100 -gdb_test "set history size 100" "" "set history size 100" -#test show history size 100 -gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)" -#test set language asm -gdb_test "set language asm" "" "set language asm" -#test show language asm -gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)" -#test set language auto -gdb_test "set language auto" "" "set language auto" -#test show language -gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)" -#test set listsize 100 -gdb_test "set listsize 100" "" "set listsize 100" -#test show listsize 100 -gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)" - -if ![board_info target exists gdb_prompt] { - #test set prompt (FooBarBaz) - set newprompt "\\(FooBarBaz\\)" - send_gdb "set prompt (FooBarBaz) \n" - gdb_expect { - -re "$newprompt $" { pass "set prompt (FooBarBaz) " } - timeout { fail "(timeout) set prompt (FooBarBaz) " } - } - - #test show prompt (FooBarBaz) - send_gdb "show prompt\n" - gdb_expect { - -re "Gdb's prompt is \"$newprompt \"..* $" \ - { pass "show prompt (FooBarBaz) " } - timeout { fail "(timeout) show prompt (FooBarBaz) " } - } - - #test set prompt (gdb) - send_gdb "set prompt (gdb) \n" - gdb_expect { - -re "$gdb_prompt $" { pass "set prompt (gdb) " } - timeout { fail "(timeout) set prompt (gdb) " } - } -} - -#test set radix 11 -gdb_test "set radix 11" "Unsupported output radix ``decimal 11''; output radix unchanged..*" "set radix 11" -#test set radix 16 -gdb_test "set radix 16" "Input and output radices now set to decimal 16, hex 10, octal 20..*" "set radix 16" -#test show radix 16 -gdb_test "show radix" "Input and output radices set to decimal 16, hex 10, octal 20..*" "show radix (16)" -#test set radix 10 -gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12..*" "set radix 10" -#test show radix 10 -gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)" -#test set width 90 -gdb_test "set width 90" "" "set width 90" -#test show width 90 -gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)" -#test set write on -# This is only supported on targets which use exec.o. -gdb_test "set write on" "" "set write on" -#test show write on -# This is only supported on targets which use exec.o. -gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)" -#test set symbol-reloading on -gdb_test "set symbol-reloading on" "" "set symbol-reloading on" -#test show symbol-reloading on -gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)" -#test show user -gdb_test "show user" "" "show user" -#test set verbose on -gdb_test "set verbose on" "" "set verbose on" -#test show verbose on -gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)" -#test set verbose off -gdb_test "set verbose off" "" "set verbose off" -#test show verbose off -gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)" |