1 files changed, 434 insertions, 0 deletions
diff --git a/gas/Makefile.old b/gas/Makefile.old
new file mode 100644
index 0000000..9cbb532
--- /dev/null
+++ b/gas/Makefile.old
@@ -0,0 +1,434 @@
+# Makefile for GAS.
+# Copyright (C) 1989, Free Software Foundation
+# 
+# This file is part of GAS, the GNU Assembler.
+# 
+# GAS is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 1, or (at your option)
+# any later version.
+# 
+# GAS is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with GAS; see the file COPYING.  If not, write to
+# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+# This makefile may be used to make the VAX, 68020, 80386, 
+# SPARC, AMD 29000, ns32k, or i860 assembler(s).
+ALL = asm29k avax a68 a386 asparc a32k a860 a960
+MDSRC=vax.c m68k.c i386.c sparc.c am29k.c ns32k.c
+
+BINDIR = $(DESTDIR)/bin
+
+# If you are on a BSD system, un-comment the next two lines, and comment out
+# the lines for SystemV and HPUX below
+#G0 = -g  -I. #-O -Wall
+#LDFLAGS = $(CFLAGS)
+#
+# To compile gas on a System Five machine, comment out the two lines above
+# and un-comment out the next three lines
+# Comment out the -lPW on the LOADLIBES line if you are using GCC.
+G0 = -g -I. -DUSG
+LDFLAGS = $(CFLAGS)
+LOADLIBES = # -lmalloc -lPW
+#
+# To compile gas for HPUX, link m-hpux.h to m68k.h , and un-comment the
+# next two lines.  (If you are using GCC, comment out the alloca.o part)
+# (Get alloca from the emacs distribution, or use GCC.)
+# HPUX 7.0 may have a bug in setvbuf.  gas gives an error message like
+# 1:"Unknown operator" -- Statement 'NO_APP' ignored
+# if setvbuf is broken.  Re-compile input-file.c (and only input-file.c
+# with -DVMS and the problem should go away.
+#
+# G0 = -g -I. -DUSG
+# LOADLIBES = alloca.o
+#
+# To compile gas for a Sequent Symmetry, comment out all the above lines,
+# and un-comment the next two lines.
+# G0 = -g -I. -DUSE_SYSTEM_HDR -DEXEC_VERSION=1
+# LOADLIBES = -lc /usr/att/lib/libc.a
+
+# Use these lines to build gas using hc.
+#CC=hc29 -cmdlink.cmd -Dconst= -I../include/msdos
+#CC=gcc29k
+#LOADLIBES= ../binutils/alloca.o
+
+# If you just want to compile the vax assembler, type 'make avax'
+
+# If you just want to compile the i386 assembler, type 'make a386'
+
+# If you just want to compile the ns32k assembler, type 'make a32k'
+
+# If you just want to compile the sparc assembler, type 'make asparc'
+
+# If you just want to compile the AMD 29000 assembler, type 'make asm29k'
+
+# If you just want to compile the a860 assembler, type 'make a860'
+
+# If you just want to compile the a960 assembler, type 'make a960'
+
+# If you just want to compile the mc68020 assembler, make sure m68k.h
+# is correctly set up, and type type 'make a68'  (Except on HPUX machines,
+# where you will have to make the changes marked below before typing
+# 'make a68'
+# m68k.h should be a symbolic or hard-link to one of
+# m-sun3.h , m-hpux.h or m-generic.h
+# depending on which machine you want to compile the 68020 assembler for.
+#
+# If you want the 68k assembler to be completely compatable with the the
+# SUN one, un-comment the -DLOCAL_LABELS_FB and -DLOCAL_LABELS_DOLLAR
+# lines below.
+#
+# Gas prefers STDARG's, but if your machine doesn't have stdarg.h, you
+# should define remove the # from the -DNO_STDARG line below.  In this
+# case gas will try to use VARARGS instead.  (but keep reading).
+#
+# If your machine does not have vfprintf, but does have _doprnt(),
+# remove the # from the -DNO_VARARGS line below.
+#
+# If the return-type of a signal-hander is void (instead of int),
+# remove the # from the -DSIGTY line below.
+#
+# To include the mc68851 mmu coprocessor instructions in the 68020 assembler,
+# remove the # from the -Dm68851 line below.
+#
+# If you want the 68020 assembler use a register prefix character, un-comment
+# the REGISTER_PREFIX line, and (maybe) change the '%' to the appropriate
+# character.
+#
+# If you want the assembler to treat .L* or ..* symbols as local, instead of
+# the usual L* symbols, un-comment the DOT_LABEL_PREFIX line.
+#
+# If you want the 80386 assembler to correctly handle fsub/fsubr and fdiv/fdivr
+# opcodes (unlike most 80386 assemblers), remove the # from
+# the -DNON_BROKEN_WORDS line below.
+#
+# To compile 80386 Gas for the Sequent Symmetry, un-comment the -DEXEC_VERSION
+# and the -DUSE_SYSTEM_HDR lines below.
+#
+# To compile gas for the HP 9000/300 un-comment the -DUSE_HP_HDR line below.
+#
+# For the ns32k, the options are 32532 or 32032 CPU and 32381 or 32081 FPU.
+# To select the NS32532, remove the # from the -DNS32532 line below.
+# To compile in tne NS32381 opcodes in addition to the NS32081 opcodes
+# (the 32381 is a superset of the 32081), remove the # from the -DNS32381
+# line below.
+#
+# For the ns32k on a Sequent, uncomment the SEQUENT_COMPATABILITY line below.
+#
+# If you want character constants to *require* closing single quotes,
+# eg 'c' rather than 'c then use the -DREQUIRE_CHAR_CLOSE_QUOTE lines
+# below.  The default is for the closing quote to be optional.
+#
+# To produce intel's b.out format, use the B_OUT line below.
+#
+# if you want to allow "\v" to mean a control-k, use the BACKSLASH_V
+# line below.
+
+# [Why is there a distinction between "Ox" and "Gx"?  It would seem easier
+#  to not have to figure out that your code isn't working because some
+#  define's are only seen by some modules and you tested it in a module
+#  where it never gets defined...  gnu@cygnus.com]
+
+O1 = -DNO_STDARG
+O2 = # -DNO_VARARGS
+O3 = # -DNON_BROKEN_WORDS
+O4 = # -Dm68851
+O5 = # -DEXEC_VERSION=1
+O6 = # -DSIGTY=void
+O6 = # -DNS32532
+O7 = # -DNS32381
+O8 = # -DDOT_LABEL_PREFIX
+O9 = # -DSEQUENT_COMPATABILITY
+
+G1 = # -DREGISTER_PREFIX=\'%\'
+G2 = # -DUSE_SYSTEM_HDR
+G3 = # -DUSE_HP_HDR
+G4 = # -DLOCAL_LABELS_DOLLAR
+G5 = # -DLOCAL_LABELS_FB
+G6 = #  -DDEBUG
+G7 = # -DREQUIRE_CHAR_CLOSE_QUOTE
+G8 = -DB_OUT
+G9 = -DBACKSLASH_V
+
+OPTIONS = $(O1) $(O2) $(O3) $(O4) $(O5) $(O6) $(O7) $(O8) $(O9)
+
+CFLAGS = $(G0) $(G1) $(G2) $(G3) $(G4) $(G5) $(G6) $(G7) $(G8) $(G9) $(OPTIONS)
+
+#
+# To make the 68020 assembler compile as the default, un-comment the next
+# line, and comment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a68
+#
+# To make the VAX assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=avax
+#
+# To make the 80386 assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a386
+#
+# To make the ns32k assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a32k
+#
+# To make the sparc assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=asparc
+#
+#
+# To make the i860 assembler compile as the default, un-comment the next
+# line and comment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a860
+#
+# To make the asm29k assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=asm29k
+#
+# To make the i960 assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a960
+
+# Global Sources -------------------------------------------------------------
+
+a =\
+as.o		xrealloc.o	xmalloc.o	hash.o		hex-value.o   \
+atof-generic.o	messages.o	expr.o		app.o         \
+frags.o		input-file.o	input-scrub.o	output-file.o	              \
+subsegs.o	symbols.o					version.o     \
+flonum-const.o	flonum-copy.o	flonum-mult.o	strstr.o	bignum-copy.o \
+obstack.o	cond.o
+#gdb.o		gdb-file.o	gdb-symbols.o	gdb-blocks.o	gdb-lines.o
+
+a:	$(DEFAULT_GAS)
+	@rm -f a
+	@ln $(DEFAULT_GAS) a
+
+# i960 GAS ------------------------------------------------------------------
+t = i960.o i960-opcode.o atof-ieee.o ver960.o read-i960.o write-i960.o
+
+T = i960.c i960-opcode.c atof-ieee.c ver960.c
+
+i960.o:	i960.c i960-opcode.h as.h frags.h struc-symbol.h
+i960.o:	flonum.h expr.h hash.h md.h write.h read.h symbols.h
+	$(CC) -c $(CFLAGS) -DI80960 i960.c
+
+write-i960.o:	write.c
+	$(CC) -c $(CFLAGS) write.c
+	mv write.o write-i960.o
+
+read-i960.o: read.c
+	$(CC) -c $(CFLAGS) read.c
+	mv read.o read-i960.o
+
+a960_cheat: $a $t
+	$(CC) -o a960 $(LDFLAGS) $a $t $(LOADLIBES)
+
+a960: force
+	$(MAKE) 'CFLAGS=$(CFLAGS) -DI80960' a960_cheat
+
+force:
+
+# AM29K GAS ------------------------------------------------------------------
+u = am29k.o  atof-ieee.o  write.o  read.o
+
+U = am29k.c  am29k-opcode.h
+
+am29k.o:	am29k.c a.out.gnu.h as.h expr.h flonum.h frags.h hash.h
+am29k.o:	am29k-opcode.h md.h obstack.h struc-symbol.h
+	$(CC) $(CFLAGS) -c am29k.c
+
+asm29k: $a $u
+	$(CC) -o asm29k $(LDFLAGS) $a $u $(LOADLIBES)
+
+# I860 GAS ------------------------------------------------------------------
+u = i860.o  atof-ieee.o  write.o  read.o
+
+U = i860.c i860-opcode.h
+
+i860.o:	i860.c i860-opcode.h as.h frags.h struc-symbol.h
+i860.o:	flonum.h expr.h hash.h md.h write.h read.h symbols.h
+	$(CC) -c $(CFLAGS) i860.c
+
+atof-ieee.o:	flonum.h
+
+a860: $a $u
+	$(CC) -o a860 $(LDFLAGS) $a $u $(LOADLIBES)
+
+# SPARC GAS ------------------------------------------------------------------
+v = sparc.o  atof-ieee.o  write.o  read.o
+
+V = sparc.c  sparc-opcode.h
+
+atof-ieee.o:	flonum.h
+sparc.o:	sparc.c reloc.h sparc-opcode.h as.h frags.h struc-symbol.h
+sparc.o:	flonum.h expr.h hash.h md.h write.h read.h symbols.h
+	$(CC) -c $(CFLAGS) -DSPARC sparc.c
+
+asparc: $a $v
+	$(CC) -o asparc $(LDFLAGS) $a $v $(LOADLIBES)
+
+# NS32K GAS ------------------------------------------------------------------
+w = ns32k.o  atof-ieee.o  write-ns32k.o  read-ns32k.o
+
+W = ns32k.c ns32k-opcode.h
+
+atof-ieee.o:	flonum.h
+ns32k.o:	as.h frags.h struc-symbol.h flonum.h expr.h md.h hash.h
+ns32k.o:	write.h symbols.h ns32k-opcode.h ns32k.c
+	$(CC) $(CFLAGS) $(OPTIONS) -c ns32k.c
+
+write-ns32k.o:	write.c
+	rm -f write-ns32k.c
+	cp write.c write-ns32k.c
+	$(CC) -c -DNS32K $(CFLAGS) write-ns32k.c
+	rm -f write-ns32k.c
+
+read-ns32k.o: read.c
+	rm -f read-ns32k.c
+	cp read.c read-ns32k.c
+	$(CC) -c -DNS32K $(CFLAGS) read-ns32k.c
+	rm -f read-ns32k.c
+
+a32k: $a $w
+	$(CC) -o a32k $(LDFLAGS) $a $w $(LOADLIBES)
+
+# 80386 GAS ------------------------------------------------------------------
+x = i386.o  atof-ieee.o  write.o  read.o
+
+X = i386.c  i386.h  i386-opcode.h
+
+i386.o:		i386.c as.h read.h flonum.h frags.h struc-symbol.h expr.h
+i386.o:		symbols.h hash.h md.h i386.h i386-opcode.h
+	$(CC) $(CFLAGS) $(OPTIONS) -c i386.c
+
+atof-ieee.o:	flonum.h
+
+a386: $a $x
+	$(CC) -o a386 $(LDFLAGS) $a $x $(LOADLIBES)
+
+# 68020 GAS ------------------------------------------------------------------
+y = m68k.o  atof-ieee.o write.o read.o
+
+Y = m68k.c atof-ieee.c m68k-opcode.h m-hpux.h m-sun3.h m-generic.h
+
+atof-ieee.o:	flonum.h
+
+m68k.o:		m68k.c a.out.gnu.h as.h expr.h flonum.h frags.h hash.h
+m68k.o:		m68k-opcode.h m68k.h md.h obstack.h struc-symbol.h
+	$(CC) $(CFLAGS) $(OPTIONS) -c m68k.c
+
+a68: $a $y
+	$(CC) -o a68 $(LDFLAGS) $a $y $(LOADLIBES)
+
+# VAX GAS --------------------------------------------------------------------
+z = vax.o  atof-vax.o  write.o  read.o
+
+Z = vax.c atof-vax.c vax-opcode.h vax-inst.h \
+    make-gas.com objrecdef.h vms.c vms-dbg.c README-vms-dbg
+
+vax.o:		vax.c a.out.gnu.h as.h expr.h flonum.h frags.h md.h obstack.h
+vax.o:		read.h struc-symbol.h symbols.h vax-inst.h vax-opcode.h
+atof-vax.o:	as.h flonum.h read.h
+
+avax:	$a $z
+	$(CC) -o avax $(LDFLAGS) $a $z $(LOADLIBES)
+
+# global files ---------------------------------------------------------------
+
+hash.o:	hash.c
+	$(CC) $(CFLAGS) -Derror=as_fatal -c hash.c
+
+xmalloc.o:	xmalloc.c
+	$(CC) $(CFLAGS) -Derror=as_fatal -c xmalloc.c
+
+xrealloc.o:	xrealloc.c
+	$(CC) $(CFLAGS) -Derror=as_fatal -c xrealloc.c
+
+A =\
+as.c		xrealloc.c	xmalloc.c	hash.c		hex-value.c \
+atof-generic.c	messages.c	expr.c		bignum-copy.c \
+frags.c		input-file.c	input-scrub.c	output-file.c	read.c \
+subsegs.c	symbols.c	write.c				strstr.c \
+flonum-const.c	flonum-copy.c	flonum-mult.c	app.c		version.c \
+obstack.c	cond.c \
+#gdb.c		gdb-file.c	gdb-symbols.c	gdb-blocks.c \
+#gdb-lines.c
+
+H = \
+a.out.gnu.h	as.h		bignum.h	expr.h		flonum.h \
+frags.h		hash.h		input-file.h	md.h	 \
+obstack.h	read.h		reloc.h		struc-symbol.h	subsegs.h \
+symbols.h	write.h
+
+dist: COPYING README ChangeLog $A $H $U $V $W $X $Y $Z Makefile
+	echo gas-`sed -n -e '/ version /s/[^0-9.]*\([0-9.]*\).*/\1/p' < version.c` > .fname
+	mkdir `cat .fname`
+
+	ln COPYING README ChangeLog $A $H $U $V $W $X $Y $Z Makefile `cat .fname`
+	tar cvhZf `cat .fname`.tar.Z `cat .fname`
+	-rm -rf .fname `cat .fname`
+
+clean:
+	rm -f a avax a68 a386 a32k asparc asm29k a860 a960 $a $u $v $w $x $y $z a core gmon.out bugs a.out
+
+all:	$(ALL)
+
+install:  install_tools
+install_tools:	a
+	cp a $(BINDIR)/as
+
+# For things like:  emacs `make mdsrc`
+mdsrc:
+	@ls $(MDSRC)
+
+LINT = /usr/5bin/lint
+LINTFLAGS =
+
+lint:
+	$(LINT) $(LINTFLAGS) $(CFLAGS) $A
+
+# General .o-->.h dependencies
+
+app.o:		as.h
+as.o:		a.out.gnu.h as.h read.h struc-symbol.h write.h
+atof-generic.o:	flonum.h
+bignum-copy.o:	bignum.h
+expr.o:		a.out.gnu.h as.h expr.h flonum.h obstack.h read.h struc-symbol.h
+expr.o:		 symbols.h
+flonum-const.o:	flonum.h
+flonum-copy.o:	flonum.h
+flonum-mult.o:	flonum.h
+flonum-normal.o:flonum.h
+flonum-print.o:	flonum.h
+frags.o:	a.out.gnu.h as.h frags.h obstack.h struc-symbol.h subsegs.h
+#gdb.o:		as.h
+#gdb-blocks.o:	as.h
+#gdb-lines.o:	as.h frags.h obstack.h
+#gdb-symbols.o:	a.out.gnu.h as.h struc-symbol.h
+hash.o:		hash.h
+input-file.o:	input-file.h
+input-scrub.o:	as.h input-file.h read.h
+messages.o:	as.h
+obstack.o:	obstack.h
+read.o:		a.out.gnu.h as.h expr.h flonum.h frags.h hash.h md.h obstack.h
+read.o:		read.h struc-symbol.h symbols.h reloc.h
+subsegs.o:	a.out.gnu.h as.h frags.h obstack.h struc-symbol.h subsegs.h write.h
+symbols.o:	a.out.gnu.h as.h frags.h hash.h obstack.h struc-symbol.h symbols.h
+write.o:	a.out.gnu.h as.h md.h obstack.h struc-symbol.h subsegs.h
+write.o:	symbols.h write.h reloc.h
+
+flonum.h:					bignum.h
+
+etags tags: TAGS
+
+TAGS: force
+	etags Makefile* README* config.gas *.[hc]
+
+force:
+
+# End of Makefile