diff options
| author | Mike Frysinger <vapier@gentoo.org> | 2021-02-06 19:46:16 -0500 |
|---|---|---|
| committer | Mike Frysinger <vapier@gentoo.org> | 2021-02-13 00:24:20 -0500 |
| commit | 136da8cd9c32379b6f4b504e62a9d1bebb36587f (patch) | |
| tree | 49f369d45f477616b01033a32802c7603cf66901 /sim/m32r | |
| parent | 652f80e07b267771ed0748966f042bdf3c379ac8 (diff) | |
| download | fsf-binutils-gdb-136da8cd9c32379b6f4b504e62a9d1bebb36587f.zip fsf-binutils-gdb-136da8cd9c32379b6f4b504e62a9d1bebb36587f.tar.gz fsf-binutils-gdb-136da8cd9c32379b6f4b504e62a9d1bebb36587f.tar.bz2 | |
sim: switch to AC_CONFIG_MACRO_DIRS
Rather than hand maintain m4 includes in various autotool files,
use AC_CONFIG_MACRO_DIRS to declare the relevant search paths.
This simplifies the code, makes it more robust, and cleans out
unused logic from configure.
Diffstat (limited to 'sim/m32r')
| -rw-r--r-- | sim/m32r/ChangeLog | 5 | ||||
| -rw-r--r-- | sim/m32r/aclocal.m4 | 32 | ||||
| -rwxr-xr-x | sim/m32r/configure | 1830 | ||||
| -rw-r--r-- | sim/m32r/configure.ac | 2 |
4 files changed, 35 insertions, 1834 deletions
diff --git a/sim/m32r/ChangeLog b/sim/m32r/ChangeLog index 42c3506..b14664c 100644 --- a/sim/m32r/ChangeLog +++ b/sim/m32r/ChangeLog @@ -1,3 +1,8 @@ +2021-02-13 Mike Frysinger <vapier@gentoo.org> + + * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS. + * aclocal.m4, configure: Regenerate. + 2021-02-06 Mike Frysinger <vapier@gentoo.org> * sim-if.c (sim_open): Delete call to STATE_WATCHPOINTS. diff --git a/sim/m32r/aclocal.m4 b/sim/m32r/aclocal.m4 index e9f11c7..1c83b20 100644 --- a/sim/m32r/aclocal.m4 +++ b/sim/m32r/aclocal.m4 @@ -45,25 +45,6 @@ AC_CONFIG_COMMANDS_PRE( Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 2003-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering @@ -117,3 +98,16 @@ AC_DEFUN([_AM_SUBST_NOTMAKE]) # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) +m4_include([../../config/acx.m4]) +m4_include([../../config/depstand.m4]) +m4_include([../../config/gettext-sister.m4]) +m4_include([../../config/lead-dot.m4]) +m4_include([../../config/override.m4]) +m4_include([../../config/plugins.m4]) +m4_include([../../config/zlib.m4]) +m4_include([../../libtool.m4]) +m4_include([../../ltoptions.m4]) +m4_include([../../ltsugar.m4]) +m4_include([../../ltversion.m4]) +m4_include([../../lt~obsolete.m4]) +m4_include([../common/acinclude.m4]) diff --git a/sim/m32r/configure b/sim/m32r/configure index 3f2ddbe..851c0f8 100755 --- a/sim/m32r/configure +++ b/sim/m32r/configure @@ -712,19 +712,6 @@ CPPFLAGS LDFLAGS CFLAGS CC -WERROR_CFLAGS -WARN_CFLAGS -sim_reserved_bits -sim_inline -sim_hw -sim_hw_objs -sim_hw_cflags -sim_default_model -sim_scache -sim_float -sim_endian -sim_bitsize -sim_alignment target_alias host_alias build_alias @@ -762,7 +749,20 @@ PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR -SHELL' +SHELL +WERROR_CFLAGS +WARN_CFLAGS +sim_reserved_bits +sim_inline +sim_hw +sim_hw_objs +sim_hw_cflags +sim_default_model +sim_scache +sim_float +sim_endian +sim_bitsize +sim_alignment' ac_subst_files='' ac_user_opts=' enable_option_checking @@ -2370,1804 +2370,6 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu -# This file contains common code used by all simulators. -# -# SIM_AC_COMMON invokes AC macros used by all simulators and by the common -# directory. It is intended to be invoked before any target specific stuff. -# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile. -# It is intended to be invoked last. -# -# See README-HACKING for more details. - -# Include global overrides and fixes for Autoconf. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - - - -# serial 56 LT_INIT - - -# LT_PREREQ(VERSION) -# ------------------ -# Complain and exit if this libtool version is less that VERSION. - - - -# _LT_CHECK_BUILDDIR -# ------------------ -# Complain if the absolute build directory name contains unusual characters - - - -# LT_INIT([OPTIONS]) -# ------------------ -# LT_INIT - -# Old names: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. - - - -# _LT_FILEUTILS_DEFAULTS -# ---------------------- -# It is okay to use these file commands and assume they have been set -# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. -# _LT_FILEUTILS_DEFAULTS - - -# _LT_SETUP -# --------- -# _LT_SETUP - - -# _LT_PREPARE_SED_QUOTE_VARS -# -------------------------- -# Define a few sed substitution that help us do robust quoting. - - -# _LT_PROG_LTMAIN -# --------------- -# Note that this code is called both from `configure', and `config.status' -# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# `config.status' has no value for ac_aux_dir unless we are using Automake, -# so we pass a copy along to make sure it has a sensible value anyway. -# _LT_PROG_LTMAIN - - -## ------------------------------------- ## -## Accumulate code for creating libtool. ## -## ------------------------------------- ## - -# So that we can recreate a full libtool script including additional -# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the `libtool' -# label. - - -# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -# ---------------------------------------- -# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. - - -# Initialize. - - - -# _LT_CONFIG_LIBTOOL([COMMANDS]) -# ------------------------------ -# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. - - -# Initialize. - - - -# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -# ----------------------------------------------------- - - - -# _LT_FORMAT_COMMENT([COMMENT]) -# ----------------------------- -# Add leading comment marks to the start of each line, and a trailing -# full-stop to the whole comment if one is not present already. - - - - -## ------------------------ ## -## FIXME: Eliminate VARNAME ## -## ------------------------ ## - - -# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -# ------------------------------------------------------------------- -# CONFIGNAME is the name given to the value in the libtool script. -# VARNAME is the (base) name used in the configure script. -# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -# VARNAME. Any other value will be used directly. - - - -# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -# -------------------------------------------------------- - - - -# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ - - - -# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -# --------------------------------------------------------- - - - -# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -# -------------------------------------------------- - - - -# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- - - - -# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- - - - - -# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ - - - - -# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -# ------------------------------------ -# Quote a variable value, and forward it to `config.status' so that its -# declaration there will have the same value as in `configure'. VARNAME -# must have a single quote delimited value for this to work. - - - -# _LT_CONFIG_STATUS_DECLARATIONS -# ------------------------------ -# We delimit libtool config variables with single quotes, so when -# we write them to config.status, we have to be sure to quote all -# embedded single quotes properly. In configure, this macro expands -# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -# -# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`' - - - -# _LT_LIBTOOL_TAGS -# ---------------- -# Output comment and list of tags supported by the script - - - -# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -# ----------------------------------- -# Extract the dictionary values for VARNAME (optionally with TAG) and -# expand to a commented shell variable setting: -# -# # Some comment about what VAR is for. -# visible_name=$lt_internal_name - - - -# _LT_LIBTOOL_CONFIG_VARS -# ----------------------- -# Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' -# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -# section) are produced by _LT_LIBTOOL_TAG_VARS. - - - -# _LT_LIBTOOL_TAG_VARS(TAG) -# ------------------------- - - - -# _LT_TAGVAR(VARNAME, [TAGNAME]) -# ------------------------------ - - - -# _LT_CONFIG_COMMANDS -# ------------------- -# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -# variables for single and double quote escaping we saved from calls -# to _LT_DECL, we can put quote escaped variables declarations -# into `config.status', and then the shell code to quote escape them in -# for loops in `config.status'. Finally, any additional code accumulated -# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -#_LT_CONFIG_COMMANDS - - -# Initialize. - - -# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) -# ------------------------------------ -# Generate a child script FILE with all initialization necessary to -# reuse the environment learned by the parent script, and make the -# file executable. If COMMENT is supplied, it is inserted after the -# `#!' sequence but before initialization text begins. After this -# macro, additional text can be appended to FILE to form the body of -# the child script. The macro ends with non-zero status if the -# file could not be fully written (such as if the disk is full). -# _LT_GENERATED_FILE_INIT - -# LT_OUTPUT -# --------- -# This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), incase it is used in configure for compilation -# tests. -# LT_OUTPUT - - -# _LT_CONFIG(TAG) -# --------------- -# If TAG is the built-in tag, create an initial libtool script with a -# default configuration from the untagged config vars. Otherwise add code -# to config.status for appending the configuration named by TAG from the -# matching tagged config vars. -# _LT_CONFIG - - -# LT_SUPPORTED_TAG(TAG) -# --------------------- -# Trace this macro to discover what tags are supported by the libtool -# --tag option, using: -# autoconf --trace 'LT_SUPPORTED_TAG:$1' - - - -# C support is built-in for now - - - - -# LT_LANG(LANG) -# ------------- -# Enable libtool support for the given language if not already enabled. -# LT_LANG - - -# _LT_LANG(LANGNAME) -# ------------------ -# _LT_LANG - - -# _LT_LANG_DEFAULT_CONFIG -# ----------------------- -# _LT_LANG_DEFAULT_CONFIG - -# Obsolete macros: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_TAG_COMPILER -# ---------------- -# _LT_TAG_COMPILER - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# ------------------------- - - - -# _LT_DARWIN_LINKER_FEATURES -# -------------------------- -# Checks for linker and compiler features on darwin - - -# _LT_SYS_MODULE_PATH_AIX -# ----------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -# _LT_SYS_MODULE_PATH_AIX - - -# _LT_SHELL_INIT(ARG) -# ------------------- -# _LT_SHELL_INIT - - - -# _LT_PROG_ECHO_BACKSLASH -# ----------------------- -# Find how we can fake an echo command that does not interpret backslash. -# In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script which will find a shell with a builtin -# printf (which we can use as an echo command). -# _LT_PROG_ECHO_BACKSLASH - - -# _LT_ENABLE_LOCK -# --------------- -# _LT_ENABLE_LOCK - - -# _LT_CMD_OLD_ARCHIVE -# ------------------- -# _LT_CMD_OLD_ARCHIVE - - -# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -# _LT_COMPILER_OPTION - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------- -# Check whether the given linker option works -# _LT_LINKER_OPTION - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# LT_CMD_MAX_LEN -#--------------- -# LT_CMD_MAX_LEN - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_HEADER_DLFCN -# ---------------- -# _LT_HEADER_DLFCN - - -# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ---------------------------------------------------------------- -# _LT_TRY_DLOPEN_SELF - - -# LT_SYS_DLOPEN_SELF -# ------------------ -# LT_SYS_DLOPEN_SELF - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_COMPILER_C_O([TAGNAME]) -# --------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler. -# This macro does not hard code the compiler like AC_PROG_CC_C_O. -# _LT_COMPILER_C_O - - -# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -# ---------------------------------- -# Check to see if we can do hard links to lock some files if needed -# _LT_COMPILER_FILE_LOCKS - - -# _LT_CHECK_OBJDIR -# ---------------- -# _LT_CHECK_OBJDIR - - -# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -# -------------------------------------- -# Check hardcoding attributes. -# _LT_LINKER_HARDCODE_LIBPATH - - -# _LT_CMD_STRIPLIB -# ---------------- -# _LT_CMD_STRIPLIB - - -# _LT_SYS_DYNAMIC_LINKER([TAG]) -# ----------------------------- -# PORTME Fill in your ld.so characteristics -# _LT_SYS_DYNAMIC_LINKER - - -# _LT_PATH_TOOL_PREFIX(TOOL) -# -------------------------- -# find a file program which can recognize shared library -# _LT_PATH_TOOL_PREFIX - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_PATH_MAGIC -# -------------- -# find a file program which can recognize a shared library -# _LT_PATH_MAGIC - - -# LT_PATH_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -# LT_PATH_LD - -# Old names: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_PATH_LD_GNU -#- -------------- -# _LT_PATH_LD_GNU - - -# _LT_CMD_RELOAD -# -------------- -# find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -# _LT_CMD_RELOAD - - -# _LT_CHECK_MAGIC_METHOD -# ---------------------- -# how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -# _LT_CHECK_MAGIC_METHOD - - -# LT_PATH_NM -# ---------- -# find the pathname to a BSD- or MS-compatible name lister -# LT_PATH_NM - -# Old names: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# LT_LIB_M -# -------- -# check for math library -# LT_LIB_M - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------- -# _LT_COMPILER_NO_RTTI - - -# _LT_CMD_GLOBAL_SYMBOLS -# ---------------------- - # _LT_CMD_GLOBAL_SYMBOLS - - -# _LT_COMPILER_PIC([TAGNAME]) -# --------------------------- -# _LT_COMPILER_PIC - - -# _LT_LINKER_SHLIBS([TAGNAME]) -# ---------------------------- -# See if the linker supports building shared libraries. -# _LT_LINKER_SHLIBS - - -# _LT_LANG_C_CONFIG([TAG]) -# ------------------------ -# Ensure that the configuration variables for a C compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -# _LT_LANG_C_CONFIG - - -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -# _LT_LANG_CXX_CONFIG - - -# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -# --------------------------------- -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -# _LT_SYS_HIDDEN_LIBDEPS - - -# _LT_LANG_F77_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a Fortran 77 compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -# _LT_LANG_F77_CONFIG - - -# _LT_LANG_FC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for a Fortran compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -# _LT_LANG_FC_CONFIG - - -# _LT_LANG_GCJ_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Java Compiler compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -# _LT_LANG_GCJ_CONFIG - - -# _LT_LANG_RC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for the Windows resource compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -# _LT_LANG_RC_CONFIG - - -# LT_PROG_GCJ -# ----------- - - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# LT_PROG_RC -# ---------- - - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_DECL_EGREP -# -------------- -# If we don't have a new enough Autoconf to choose the best grep -# available, choose the one first in the user's PATH. - - - -# _LT_DECL_OBJDUMP -# -------------- -# If we don't have a new enough Autoconf to choose the best objdump -# available, choose the one first in the user's PATH. - - - -# _LT_DECL_SED -# ------------ -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -# _LT_DECL_SED - -#m4_ifndef - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -# _LT_CHECK_SHELL_FEATURES -# ------------------------ -# Find out whether the shell is Bourne or XSI compatible, -# or has some other useful features. -# _LT_CHECK_SHELL_FEATURES - - -# _LT_PROG_XSI_SHELLFNS -# --------------------- -# Bourne and XSI compatible variants of some useful shell functions. - - -# Helper functions for option handling. -*- Autoconf -*- -# -# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltoptions.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. - - - -# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -# ------------------------------------------ - - - -# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -# --------------------------------------- -# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -# matching handler defined, dispatch to it. Other OPTION-NAMEs are -# saved as a flag. - - - -# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -# ------------------------------------------------------------ -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. - - - -# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -# ------------------------------------------------------- -# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -# are set. - - - -# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -# ---------------------------------------- -# OPTION-LIST is a space-separated list of Libtool options associated -# with MACRO-NAME. If any OPTION has a matching handler declared with -# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -# the unknown option and exit. -# _LT_SET_OPTIONS - - -## --------------------------------- ## -## Macros to handle LT_INIT options. ## -## --------------------------------- ## - -# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -# ----------------------------------------- - - - -# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -# ----------------------------------------------- -# LT_OPTION_DEFINE - - -# dlopen -# ------ - - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - - -# win32-dll -# --------- -# Declare package support for building win32 dll's. -# win32-dll - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - - -# _LT_ENABLE_SHARED([DEFAULT]) -# ---------------------------- -# implement the --enable-shared flag, and supports the `shared' and -# `disable-shared' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -# _LT_ENABLE_SHARED - - - - -# Old names: - - - - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - - - -# _LT_ENABLE_STATIC([DEFAULT]) -# ---------------------------- -# implement the --enable-static flag, and support the `static' and -# `disable-static' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -# _LT_ENABLE_STATIC - - - - -# Old names: - - - - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - - - -# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -# ---------------------------------- -# implement the --enable-fast-install flag, and support the `fast-install' -# and `disable-fast-install' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -# _LT_ENABLE_FAST_INSTALL - - - - -# Old names: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - - -# _LT_WITH_PIC([MODE]) -# -------------------- -# implement the --with-pic flag, and support the `pic-only' and `no-pic' -# LT_INIT options. -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -# _LT_WITH_PIC - - - - -# Old name: -# This is what autoupdate's m4 run will expand. It fires -# the warning (with _au_warn_XXX), outputs it into the -# updated configure.ac (with AC_DIAGNOSE), and then outputs -# the replacement expansion. - - -# This is an auxiliary macro that is also run when -# autoupdate runs m4. It simply calls m4_warning, but -# we need a wrapper so that each warning is emitted only -# once. We break the quoting in m4_warning's argument in -# order to expand this macro's arguments, not AU_DEFUN's. - - -# Finally, this is the expansion that is picked up by -# autoconf. It tells the user to run autoupdate, and -# then outputs the replacement expansion. We do not care -# about autoupdate's warning because that contains -# information on what to do *after* running autoupdate. - - - -## ----------------- ## -## LTDL_INIT Options ## -## ----------------- ## - - - - - - - - - - -# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltsugar.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. - - - -# lt_join(SEP, ARG1, [ARG2...]) -# ----------------------------- -# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -# associated separator. -# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -# versions in m4sugar had bugs. - - - - -# lt_car(LIST) -# lt_cdr(LIST) -# ------------ -# Manipulate m4 lists. -# These macros are necessary as long as will still need to support -# Autoconf-2.59 which quotes differently. - - - - - -# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -# ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. -# Note that neither SEPARATOR nor STRING are expanded; they are appended -# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -# No SEPARATOR is output if MACRO-NAME was previously undefined (different -# than defined and empty). -# -# This macro is needed until we can rely on Autoconf 2.62, since earlier -# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. - - - - -# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -# ---------------------------------------------------------- -# Produce a SEP delimited list of all paired combinations of elements of -# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -# has the form PREFIXmINFIXSUFFIXn. -# Needed until we can rely on m4_combine added in Autoconf 2.62. - - - -# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -# ----------------------------------------------------------------------- -# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. - - - -# lt_dict_add(DICT, KEY, VALUE) -# ----------------------------- - - - -# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -# -------------------------------------------- - - - -# lt_dict_fetch(DICT, KEY, [SUBKEY]) -# ---------------------------------- - - - -# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -# ----------------------------------------------------------------- - - - -# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -# -------------------------------------------------------------- - - -# ltversion.m4 -- version numbers -*- Autoconf -*- -# -# Copyright (C) 2004 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# Generated from ltversion.in. - -# serial 3134 ltversion.m4 -# This file is part of GNU Libtool - - - - - - -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 4 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -## -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# Based on depend.m4 from automake 1.9, modified for standalone use in -# an environment where GNU make is required. - -# ZW_PROG_COMPILER_DEPENDENCIES -# ----------------------------- -# Variant of _AM_DEPENDENCIES which just does the dependency probe and -# sets fooDEPMODE accordingly. Cache-variable compatible with -# original; not side-effect compatible. As the users of this macro -# may require accurate dependencies for correct builds, it does *not* -# honor --disable-dependency-checking, and failure to detect a usable -# method is an error. depcomp is assumed to be located in -# $ac_aux_dir. -# -# FIXME: Should use the Autoconf 2.5x language-selection mechanism. - - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. - - -# ZW_CREATE_DEPDIR -# ---------------- -# As AM_SET_DEPDIR, but also create the directory at config.status time. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# intl sister-directory configuration rules. -# - -# The idea behind this macro is that there's no need to repeat all the -# autoconf probes done by the intl directory - it's already done them -# for us. In fact, there's no need even to look at the cache for the -# answers. All we need to do is nab a few pieces of information. -# The intl directory is set up to make this easy, by generating a -# small file which can be sourced as a shell script; then we produce -# the necessary substitutions and definitions for this directory. - - - -# Autoconf M4 include file defining utility macros for complex Canadian -# cross builds. - - - - - - - - - -#### -# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM -# or AC_INIT. -# These demand that AC_CANONICAL_SYSTEM be called beforehand. - -#### -# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path]) -# Like plain AC_CHECK_TOOLS, but require prefix if build!=host. - - -#### -# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path]) -# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target. - - - -# Backported from Autoconf 2.5x; can go away when and if -# we switch. Put the OS path separator in $PATH_SEPARATOR. - - - - - - - - -# ACX_HAVE_GCC_FOR_TARGET -# Check if the variable GCC_FOR_TARGET really points to a GCC binary. - - -# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG) -# Searching for installed target binutils. We need to take extra care, -# else we may find the wrong assembler, linker, etc., and lose. -# -# First try --with-build-time-tools, if specified. -# -# For build != host, we ask the installed GCC for the name of the tool it -# uses, and accept it if it is an absolute path. This is because the -# only good choice for a compiler is the same GCC version that is being -# installed (or we couldn't make target libraries), and we assume that -# on the host system we'll have not only the same GCC version, but also -# the same binutils version. -# -# For build == host, search the same directories that the installed -# compiler will search. We used to do this for the assembler, linker, -# and nm only; for simplicity of configuration, however, we extend this -# criterion to tools (such as ar and ranlib) that are never invoked by -# the compiler, to avoid mismatches. -# -# Also note we have to check MD_EXEC_PREFIX before checking the user's path -# if build == target. This makes the most sense only when bootstrapping, -# but we also do so when build != host. In this case, we hope that the -# build and host systems will have similar contents of MD_EXEC_PREFIX. -# -# If we do not find a suitable binary, then try the user's path. - - -### -# AC_PROG_CPP_WERROR -# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which -# triggers warnings from the preprocessor. Will be in autoconf 2.58. -# For now, using this also overrides header checks to use only the -# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a -# bit harder from here). -# Eventually autoconf will default to checking headers with the compiler -# instead, and we'll have to do this differently. - -# AC_PROG_CPP_WERROR - -# Test for GNAT. -# We require the gnatbind & gnatmake programs, as well as a compiler driver -# that understands Ada. We use the user's CC setting, already found, and -# possibly add $1 to the command-line parameters. -# -# Sets the shell variable have_gnat to yes or no as appropriate, and -# substitutes GNATBIND and GNATMAKE. - - - - - - - - - - - - - - - - - - - - @@ -12950,7 +11152,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12953 "configure" +#line 11155 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13056,7 +11258,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 13059 "configure" +#line 11261 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/m32r/configure.ac b/sim/m32r/configure.ac index e74a8a5..f27135d 100644 --- a/sim/m32r/configure.ac +++ b/sim/m32r/configure.ac @@ -1,6 +1,6 @@ dnl Process this file with autoconf to produce a configure script. AC_INIT(Makefile.in) -sinclude(../common/acinclude.m4) +AC_CONFIG_MACRO_DIRS([../common ../.. ../../config]) SIM_AC_COMMON |