aboutsummaryrefslogtreecommitdiff
path: root/gnulib/import/m4/signal_h.m4
diff options
context:
space:
mode:
authorTom Tromey <tom@tromey.com>2019-05-05 17:35:20 -0600
committerTom Tromey <tom@tromey.com>2019-06-14 12:40:02 -0600
commit73cc72729a184f00bf6fc4d74684a8516ba6b683 (patch)
treee6887d2f33a00c23c4ec054d02b9be9f892da571 /gnulib/import/m4/signal_h.m4
parentf568655424ad268c8c5df3f56e4e19a86b16623d (diff)
downloadfsf-binutils-gdb-73cc72729a184f00bf6fc4d74684a8516ba6b683.zip
fsf-binutils-gdb-73cc72729a184f00bf6fc4d74684a8516ba6b683.tar.gz
fsf-binutils-gdb-73cc72729a184f00bf6fc4d74684a8516ba6b683.tar.bz2
Move gnulib to top level
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild.
Diffstat (limited to 'gnulib/import/m4/signal_h.m4')
-rw-r--r--gnulib/import/m4/signal_h.m483
1 files changed, 83 insertions, 0 deletions
diff --git a/gnulib/import/m4/signal_h.m4 b/gnulib/import/m4/signal_h.m4
new file mode 100644
index 0000000..bcfd7b4
--- /dev/null
+++ b/gnulib/import/m4/signal_h.m4
@@ -0,0 +1,83 @@
+# signal_h.m4 serial 18
+dnl Copyright (C) 2007-2016 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_SIGNAL_H],
+[
+ AC_REQUIRE([gl_SIGNAL_H_DEFAULTS])
+ AC_REQUIRE([gl_CHECK_TYPE_SIGSET_T])
+ gl_NEXT_HEADERS([signal.h])
+
+# AIX declares sig_atomic_t to already include volatile, and C89 compilers
+# then choke on 'volatile sig_atomic_t'. C99 requires that it compile.
+ AC_CHECK_TYPE([volatile sig_atomic_t], [],
+ [HAVE_TYPE_VOLATILE_SIG_ATOMIC_T=0], [[
+#include <signal.h>
+ ]])
+
+ dnl Ensure the type pid_t gets defined.
+ AC_REQUIRE([AC_TYPE_PID_T])
+
+ AC_REQUIRE([AC_TYPE_UID_T])
+
+ dnl Persuade glibc <signal.h> to define sighandler_t.
+ AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])
+ AC_CHECK_TYPE([sighandler_t], [], [HAVE_SIGHANDLER_T=0], [[
+#include <signal.h>
+ ]])
+
+ dnl Check for declarations of anything we want to poison if the
+ dnl corresponding gnulib module is not in use.
+ gl_WARN_ON_USE_PREPARE([[#include <signal.h>
+ ]], [pthread_sigmask sigaction
+ sigaddset sigdelset sigemptyset sigfillset sigismember
+ sigpending sigprocmask])
+])
+
+AC_DEFUN([gl_CHECK_TYPE_SIGSET_T],
+[
+ AC_CHECK_TYPES([sigset_t],
+ [gl_cv_type_sigset_t=yes], [gl_cv_type_sigset_t=no],
+ [[
+ #include <signal.h>
+ /* Mingw defines sigset_t not in <signal.h>, but in <sys/types.h>. */
+ #include <sys/types.h>
+ ]])
+ if test $gl_cv_type_sigset_t != yes; then
+ HAVE_SIGSET_T=0
+ fi
+])
+
+AC_DEFUN([gl_SIGNAL_MODULE_INDICATOR],
+[
+ dnl Use AC_REQUIRE here, so that the default settings are expanded once only.
+ AC_REQUIRE([gl_SIGNAL_H_DEFAULTS])
+ gl_MODULE_INDICATOR_SET_VARIABLE([$1])
+ dnl Define it also as a C macro, for the benefit of the unit tests.
+ gl_MODULE_INDICATOR_FOR_TESTS([$1])
+])
+
+AC_DEFUN([gl_SIGNAL_H_DEFAULTS],
+[
+ GNULIB_PTHREAD_SIGMASK=0; AC_SUBST([GNULIB_PTHREAD_SIGMASK])
+ GNULIB_RAISE=0; AC_SUBST([GNULIB_RAISE])
+ GNULIB_SIGNAL_H_SIGPIPE=0; AC_SUBST([GNULIB_SIGNAL_H_SIGPIPE])
+ GNULIB_SIGPROCMASK=0; AC_SUBST([GNULIB_SIGPROCMASK])
+ GNULIB_SIGACTION=0; AC_SUBST([GNULIB_SIGACTION])
+ dnl Assume proper GNU behavior unless another module says otherwise.
+ HAVE_POSIX_SIGNALBLOCKING=1; AC_SUBST([HAVE_POSIX_SIGNALBLOCKING])
+ HAVE_PTHREAD_SIGMASK=1; AC_SUBST([HAVE_PTHREAD_SIGMASK])
+ HAVE_RAISE=1; AC_SUBST([HAVE_RAISE])
+ HAVE_SIGSET_T=1; AC_SUBST([HAVE_SIGSET_T])
+ HAVE_SIGINFO_T=1; AC_SUBST([HAVE_SIGINFO_T])
+ HAVE_SIGACTION=1; AC_SUBST([HAVE_SIGACTION])
+ HAVE_STRUCT_SIGACTION_SA_SIGACTION=1;
+ AC_SUBST([HAVE_STRUCT_SIGACTION_SA_SIGACTION])
+ HAVE_TYPE_VOLATILE_SIG_ATOMIC_T=1;
+ AC_SUBST([HAVE_TYPE_VOLATILE_SIG_ATOMIC_T])
+ HAVE_SIGHANDLER_T=1; AC_SUBST([HAVE_SIGHANDLER_T])
+ REPLACE_PTHREAD_SIGMASK=0; AC_SUBST([REPLACE_PTHREAD_SIGMASK])
+ REPLACE_RAISE=0; AC_SUBST([REPLACE_RAISE])
+])