Trying to fix repository after cvs breakage...

1 files changed, 0 insertions, 1127 deletions

diff --git a/binutils/binutils.info b/binutils/binutils.info
deleted file mode 100644
index 0e38557..0000000
--- a/binutils/binutils.info
+++ /dev/null
@@ -1,1127 +0,0 @@
-This is Info file binutils.info, produced by Makeinfo-1.55 from the
-input file ./binutils.texi.
-
-START-INFO-DIR-ENTRY
-* Binutils::                    The GNU binary utilities "ar", "ld", "objcopy",
-				"objdump", "nm", "size", "strings", "strip", and "ranlib".
-END-INFO-DIR-ENTRY
-
-   Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc.
-
-   Permission is granted to make and distribute verbatim copies of this
-manual provided the copyright notice and this permission notice are
-preserved on all copies.
-
-   Permission is granted to copy and distribute modified versions of
-this manual under the conditions for verbatim copying, provided also
-that the entire resulting derived work is distributed under the terms
-of a permission notice identical to this one.
-
-   Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions.
-
-
-File: binutils.info,  Node: Top,  Next: ar,  Prev: (dir),  Up: (dir)
-
-Introduction
-************
-
-   This brief manual contains preliminary documentation for the GNU
-binary utilities (collectively version 2.2):
-
-* Menu:
-
-* ar::                          Create, modify, and extract from archives
-* ld:(ld)Overview.              Combine object and archive files
-* nm::                          List symbols from object files
-* objcopy::			Copy and translate object files
-* objdump::                     Display information from object files
-* ranlib::                      Generate index to archive contents
-* size::                        List section sizes and total size
-* strings::                     List printable strings from files
-* strip::                       Discard symbols
-* c++filt::			Filter to demangle encoded C++ symbols
-* Index::
-
-
-File: binutils.info,  Node: ar,  Next: nm,  Prev: Top,  Up: Top
-
-ar
-**
-
-     ar [-]P[MOD [RELPOS]] ARCHIVE [MEMBER...]
-     ar -M [ <mri-script ]
-
-   The GNU `ar' program creates, modifies, and extracts from archives.
-An "archive" is a single file holding a collection of other files in a
-structure that makes it possible to retrieve the original individual
-files (called "members" of the archive).
-
-   The original files' contents, mode (permissions), timestamp, owner,
-and group are preserved in the archive, and can be restored on
-extraction.
-
-   GNU `ar' can maintain archives whose members have names of any
-length; however, depending on how `ar' is configured on your system, a
-limit on member-name length may be imposed for compatibility with
-archive formats maintained with other tools.  If it exists, the limit
-is often 15 characters (typical of formats related to a.out) or 16
-characters (typical of formats related to coff).
-
-   `ar' is considered a binary utility because archives of this sort
-are most often used as "libraries" holding commonly needed subroutines.
-
-   `ar' creates an index to the symbols defined in relocatable object
-modules in the archive when you specify the modifier `s'.  Once
-created, this index is updated in the archive whenever `ar' makes a
-change to its contents (save for the `q' update operation).  An archive
-with such an index speeds up linking to the library, and allows
-routines in the library to call each other without regard to their
-placement in the archive.
-
-   You may use `nm -s' or `nm --print-armap' to list this index table.
-If an archive lacks the table, another form of `ar' called `ranlib' can
-be used to add just the table.
-
-   GNU `ar' is designed to be compatible with two different facilities.
-You can control its activity using command-line options, like the
-different varieties of `ar' on Unix systems; or, if you specify the
-single command-line option `-M', you can control it with a script
-supplied via standard input, like the MRI "librarian" program.
-
-* Menu:
-
-* ar-cmdline::                  Controlling `ar' on the command line
-* ar-scripts::                  Controlling `ar' with a script
-
-
-File: binutils.info,  Node: ar-cmdline,  Next: ar-scripts,  Prev: ar,  Up: ar
-
-Controlling `ar' on the command line
-====================================
-
-     ar [-]P[MOD [RELPOS]] ARCHIVE [MEMBER...]
-
-   When you use `ar' in the Unix style, `ar' insists on at least two
-arguments to execute: one keyletter specifying the *operation*
-(optionally accompanied by other keyletters specifying *modifiers*),
-and the archive name to act on.
-
-   Most operations can also accept further MEMBER arguments, specifying
-particular files to operate on.
-
-   GNU `ar' allows you to mix the operation code P and modifier flags
-MOD in any order, within the first command-line argument.
-
-   If you wish, you may begin the first command-line argument with a
-dash.
-
-   The P keyletter specifies what operation to execute; it may be any
-of the following, but you must specify only one of them:
-
-`d'
-     *Delete* modules from the archive.  Specify the names of modules to
-     be deleted as MEMBER...; the archive is untouched if you specify
-     no files to delete.
-
-     If you specify the `v' modifier, `ar' lists each module as it is
-     deleted.
-
-`m'
-     Use this operation to *move* members in an archive.
-
-     The ordering of members in an archive can make a difference in how
-     programs are linked using the library, if a symbol is defined in
-     more than one member.
-
-     If no modifiers are used with `m', any members you name in the
-     MEMBER arguments are moved to the *end* of the archive; you can
-     use the `a', `b', or `i' modifiers to move them to a specified
-     place instead.
-
-`p'
-     *Print* the specified members of the archive, to the standard
-     output file.  If the `v' modifier is specified, show the member
-     name before copying its contents to standard output.
-
-     If you specify no MEMBER arguments, all the files in the archive
-     are printed.
-
-`q'
-     *Quick append*; add the files MEMBER... to the end of ARCHIVE,
-     without checking for replacement.
-
-     The modifiers `a', `b', and `i' do *not* affect this operation;
-     new members are always placed at the end of the archive.
-
-     The modifier `v' makes `ar' list each file as it is appended.
-
-     Since the point of this operation is speed, the archive's symbol
-     table index is not updated, even if it already existed; you can
-     use `ar s' or `ranlib' explicitly to update the symbol table index.
-
-`r'
-     Insert the files MEMBER... into ARCHIVE (with *replacement*). This
-     operation differs from `q' in that any previously existing members
-     are deleted if their names match those being added.
-
-     If one of the files named in MEMBER... does not exist, `ar'
-     displays an error message, and leaves undisturbed any existing
-     members of the archive matching that name.
-
-     By default, new members are added at the end of the file; but you
-     may use one of the modifiers `a', `b', or `i' to request placement
-     relative to some existing member.
-
-     The modifier `v' used with this operation elicits a line of output
-     for each file inserted, along with one of the letters `a' or `r'
-     to indicate whether the file was appended (no old member deleted)
-     or replaced.
-
-`t'
-     Display a *table* listing the contents of ARCHIVE, or those of the
-     files listed in MEMBER... that are present in the archive.
-     Normally only the member name is shown; if you also want to see
-     the modes (permissions), timestamp, owner, group, and size, you can
-     request that by also specifying the `v' modifier.
-
-     If you do not specify a MEMBER, all files in the archive are
-     listed.
-
-     If there is more than one file with the same name (say, `fie') in
-     an archive (say `b.a'), `ar t b.a fie' lists only the first
-     instance; to see them all, you must ask for a complete listing--in
-     our example, `ar t b.a'.
-
-`x'
-     *Extract* members (named MEMBER) from the archive.  You can use
-     the `v' modifier with this operation, to request that `ar' list
-     each name as it extracts it.
-
-     If you do not specify a MEMBER, all files in the archive are
-     extracted.
-
-   A number of modifiers (MOD) may immediately follow the P keyletter,
-to specify variations on an operation's behavior:
-
-`a'
-     Add new files *after* an existing member of the archive.  If you
-     use the modifier `a', the name of an existing archive member must
-     be present as the RELPOS argument, before the ARCHIVE
-     specification.
-
-`b'
-     Add new files *before* an existing member of the archive.  If you
-     use the modifier `b', the name of an existing archive member must
-     be present as the RELPOS argument, before the ARCHIVE
-     specification.  (same as `i').
-
-`c'
-     *Create* the archive.  The specified ARCHIVE is always created if
-     it did not exist, when you request an update.  But a warning is
-     issued unless you specify in advance that you expect to create it,
-     by using this modifier.
-
-`i'
-     Insert new files *before* an existing member of the archive.  If
-     you use the modifier `i', the name of an existing archive member
-     must be present as the RELPOS argument, before the ARCHIVE
-     specification.  (same as `b').
-
-`l'
-     This modifier is accepted but not used.
-
-`o'
-     Preserve the *original* dates of members when extracting them.  If
-     you do not specify this modifier, files extracted from the archive
-     are stamped with the time of extraction.
-
-`s'
-     Write an object-file index into the archive, or update an existing
-     one, even if no other change is made to the archive.  You may use
-     this modifier flag either with any operation, or alone.  Running
-     `ar s' on an archive is equivalent to running `ranlib' on it.
-
-`u'
-     Normally, `ar r'... inserts all files listed into the archive.  If
-     you would like to insert *only* those of the files you list that
-     are newer than existing members of the same names, use this
-     modifier.  The `u' modifier is allowed only for the operation `r'
-     (replace).  In particular, the combination `qu' is not allowed,
-     since checking the timestamps would lose any speed advantage from
-     the operation `q'.
-
-`v'
-     This modifier requests the *verbose* version of an operation.  Many
-     operations display additional information, such as filenames
-     processed, when the modifier `v' is appended.
-
-`V'
-     This modifier shows the version number of `ar'.
-
-
-File: binutils.info,  Node: ar-scripts,  Prev: ar-cmdline,  Up: ar
-
-Controlling `ar' with a script
-==============================
-
-     ar -M [ <SCRIPT ]
-
-   If you use the single command-line option `-M' with `ar', you can
-control its operation with a rudimentary command language.  This form
-of `ar' operates interactively if standard input is coming directly
-from a terminal.  During interactive use, `ar' prompts for input (the
-prompt is `AR >'), and continues executing even after errors.  If you
-redirect standard input to a script file, no prompts are issued, and
-`ar' abandons execution (with a nonzero exit code) on any error.
-
-   The `ar' command language is *not* designed to be equivalent to the
-command-line options; in fact, it provides somewhat less control over
-archives.  The only purpose of the command language is to ease the
-transition to GNU `ar' for developers who already have scripts written
-for the MRI "librarian" program.
-
-   The syntax for the `ar' command language is straightforward:
-   * commands are recognized in upper or lower case; for example, `LIST'
-     is the same as `list'.  In the following descriptions, commands are
-     shown in upper case for clarity.
-
-   * a single command may appear on each line; it is the first word on
-     the line.
-
-   * empty lines are allowed, and have no effect.
-
-   * comments are allowed; text after either of the characters `*' or
-     `;' is ignored.
-
-   * Whenever you use a list of names as part of the argument to an `ar'
-     command, you can separate the individual names with either commas
-     or blanks.  Commas are shown in the explanations below, for
-     clarity.
-
-   * `+' is used as a line continuation character; if `+' appears at
-     the end of a line, the text on the following line is considered
-     part of the current command.
-
-   Here are the commands you can use in `ar' scripts, or when using
-`ar' interactively.  Three of them have special significance:
-
-   `OPEN' or `CREATE' specify a "current archive", which is a temporary
-file required for most of the other commands.
-
-   `SAVE' commits the changes so far specified by the script.  Prior to
-`SAVE', commands affect only the temporary copy of the current archive.
-
-`ADDLIB ARCHIVE'
-`ADDLIB ARCHIVE (MODULE, MODULE, ... MODULE)'
-     Add all the contents of ARCHIVE (or, if specified, each named
-     MODULE from ARCHIVE) to the current archive.
-
-     Requires prior use of `OPEN' or `CREATE'.
-
-`ADDMOD MEMBER, MEMBER, ... MEMBER'
-     Add each named MEMBER as a module in the current archive.
-
-     Requires prior use of `OPEN' or `CREATE'.
-
-`CLEAR'
-     Discard the contents of the current archive, cancelling the effect
-     of any operations since the last `SAVE'.  May be executed (with no
-     effect) even if  no current archive is specified.
-
-`CREATE ARCHIVE'
-     Creates an archive, and makes it the current archive (required for
-     many other commands).  The new archive is created with a temporary
-     name; it is not actually saved as ARCHIVE until you use `SAVE'.
-     You can overwrite existing archives; similarly, the contents of any
-     existing file named ARCHIVE will not be destroyed until `SAVE'.
-
-`DELETE MODULE, MODULE, ... MODULE'
-     Delete each listed MODULE from the current archive; equivalent to
-     `ar -d ARCHIVE MODULE ... MODULE'.
-
-     Requires prior use of `OPEN' or `CREATE'.
-
-`DIRECTORY ARCHIVE (MODULE, ... MODULE)'
-`DIRECTORY ARCHIVE (MODULE, ... MODULE) OUTPUTFILE'
-     List each named MODULE present in ARCHIVE.  The separate command
-     `VERBOSE' specifies the form of the output: when verbose output is
-     off, output is like that of `ar -t ARCHIVE MODULE...'.  When
-     verbose output is on, the listing is like `ar -tv ARCHIVE
-     MODULE...'.
-
-     Output normally goes to the standard output stream; however, if you
-     specify OUTPUTFILE as a final argument, `ar' directs the output to
-     that file.
-
-`END'
-     Exit from `ar', with a `0' exit code to indicate successful
-     completion.  This command does not save the output file; if you
-     have changed the current archive since the last `SAVE' command,
-     those changes are lost.
-
-`EXTRACT MODULE, MODULE, ... MODULE'
-     Extract each named MODULE from the current archive, writing them
-     into the current directory as separate files.  Equivalent to `ar -x
-     ARCHIVE MODULE...'.
-
-     Requires prior use of `OPEN' or `CREATE'.
-
-`LIST'
-     Display full contents of the current archive, in "verbose" style
-     regardless of the state of `VERBOSE'.  The effect is like `ar tv
-     ARCHIVE').  (This single command is a GNU `ld' enhancement, rather
-     than present for MRI compatibility.)
-
-     Requires prior use of `OPEN' or `CREATE'.
-
-`OPEN ARCHIVE'
-     Opens an existing archive for use as the current archive (required
-     for many other commands).  Any changes as the result of subsequent
-     commands will not actually affect ARCHIVE until you next use
-     `SAVE'.
-
-`REPLACE MODULE, MODULE, ... MODULE'
-     In the current archive, replace each existing MODULE (named in the
-     `REPLACE' arguments) from files in the current working directory.
-     To execute this command without errors, both the file, and the
-     module in the current archive, must exist.
-
-     Requires prior use of `OPEN' or `CREATE'.
-
-`VERBOSE'
-     Toggle an internal flag governing the output from `DIRECTORY'.
-     When the flag is on, `DIRECTORY' output matches output from `ar
-     -tv '....
-
-`SAVE'
-     Commit your changes to the current archive, and actually save it
-     as a file with the name specified in the last `CREATE' or `OPEN'
-     command.
-
-     Requires prior use of `OPEN' or `CREATE'.
-
-
-File: binutils.info,  Node: nm,  Next: objcopy,  Prev: ar,  Up: Top
-
-nm
-**
-
-     nm [ -a | --debug-syms ]  [ -g | --extern-only ]
-        [ -B ]  [ -C | --demangle ]
-        [ -s | --print-armap ]  [ -A | -o | --print-file-name ]
-        [ -n | -v | --numeric-sort ]  [ -p | --no-sort ]
-        [ -r | --reverse-sort ]  [ -u | --undefined-only ]
-        [ -t RADIX | --radix=RADIX ] [ -P | --portability ]
-        [ --target=BFDNAME ] [ -f FORMAT | --format=FORMAT ]
-        [ -V | --version ]  [ --help ]  [ OBJFILE... ]
-
-   GNU `nm' lists the symbols from object files OBJFILE....  If no
-object files are listed as arguments, `nm' assumes `a.out'.
-
-   For each symbol, `nm' shows:
-
-   * The symbol value, in the radix selected by options (see below), or
-     hexadecimal by default.
-
-   * The symbol type.  At least the following types are used; others
-     are, as well, depending on the object file format.  If lowercase,
-     the symbol is local; if uppercase, the symbol is global (external).
-
-    `A'
-          Absolute.
-
-    `B'
-          BSS (uninitialized data).
-
-    `C'
-          Common.
-
-    `D'
-          Initialized data.
-
-    `I'
-          Indirect reference.
-
-    `T'
-          Text (program code).
-
-    `U'
-          Undefined.
-
-   * The symbol name.
-
-   The long and short forms of options, shown here as alternatives, are
-equivalent.
-
-`-A'
-`-o'
-`--print-file-name'
-     Precede each symbol by the name of the input file (or archive
-     element) in which it was found, rather than identifying the input
-     file once only, before all of its symbols.
-
-`-a'
-`--debug-syms'
-     Display all symbols, even debugger-only symbols; normally these
-     are not listed.
-
-`-B'
-     The same as `--format=bsd' (for compatibility with the MIPS `nm').
-
-`-C'
-`--demangle'
-     Decode ("demangle") low-level symbol names into user-level names.
-     Besides removing any initial underscore prepended by the system,
-     this makes C++ function names readable.  *Note c++filt::, for more
-     information on demangling.
-
-`-f FORMAT'
-`--format=FORMAT'
-     Use the output format FORMAT, which can be `bsd', `sysv', or
-     `posix'.  The default is `bsd'.  Only the first character of
-     FORMAT is significant; it can be either upper or lower case.
-
-`-g'
-`--extern-only'
-     Display only external symbols.
-
-`-n'
-`-v'
-`--numeric-sort'
-     Sort symbols numerically by their addresses, rather than
-     alphabetically by their names.
-
-`-p'
-`--no-sort'
-     Do not bother to sort the symbols in any order; print them in the
-     order encountered.
-
-`-P'
-`--portability'
-     Use the POSIX.2 standard output format instead of the default
-     format.  Equivalent to `-f posix'.
-
-`-s'
-`--print-armap'
-     When listing symbols from archive members, include the index: a
-     mapping (stored in the archive by `ar' or `ranlib') of which
-     modules contain definitions for which names.
-
-`-r'
-`--reverse-sort'
-     Reverse the order of the sort (whether numeric or alphabetic); let
-     the last come first.
-
-`-t RADIX'
-`--radix=RADIX'
-     Use RADIX as the radix for printing the symbol values.  It must be
-     `d' for decimal, `o' for octal, or `x' for hexadecimal.
-
-`--target=BFDNAME'
-     Specify an object code format other than your system's default
-     format.  *Note objdump::, for information on listing available
-     formats.
-
-`-u'
-`--undefined-only'
-     Display only undefined symbols (those external to each object
-     file).
-
-`-V'
-`--version'
-     Show the version number of `nm' and exit.
-
-`--help'
-     Show a summary of the options to `nm' and exit.
-
-
-File: binutils.info,  Node: objcopy,  Next: objdump,  Prev: nm,  Up: Top
-
-objcopy
-*******
-
-     objcopy [ -F FORMAT | --format=FORMAT ]
-             [ -I FORMAT | --input-format=FORMAT ]
-             [ -O FORMAT | --output-format=FORMAT ]
-             [ -S | --strip-all ]  [ -g | --strip-debug ]
-             [ -x | --discard-all ]  [ -X | --discard-locals ]
-             [ -v | --verbose ]  [ -V | --version ]  [ --help ]
-             INFILE [OUTFILE]
-
-   The GNU `objcopy' utility copies the contents of an object file to
-another.  `objcopy' uses the GNU BFD Library to read and write the
-object files.  It can write the destination object file in a format
-different from that of the source object file.  The exact behavior of
-`objcopy' is controlled by command-line options.
-
-   `objcopy' creates temporary files to do its translations and deletes
-them afterward.  `objcopy' uses BFD to do all its translation work; it
-knows about all the formats BFD knows about, and thus is able to
-recognize most formats without being told explicitly.  *Note BFD:
-(ld.info)BFD the GNU linker.
-
-`INFILE'
-`OUTFILE'
-     The source and output files respectively.  If you do not specify
-     OUTFILE, `objcopy' creates a temporary file and destructively
-     renames the result with the name of the input file.
-
-`-I FORMAT'
-`--input-format=FORMAT'
-     Consider the source file's object format to be FORMAT, rather than
-     attempting to deduce it.
-
-`-O FORMAT'
-`--output-format=FORMAT'
-     Write the output file using the object format FORMAT.
-
-`-F FORMAT'
-`--format=FORMAT'
-     Use FORMAT as the object format for both the input and the output
-     file; i.e. simply transfer data from source to destination with no
-     translation.
-
-`-S'
-`--strip-all'
-     Do not copy relocation and symbol information from the source file.
-
-`-g'
-`--strip-debug'
-     Do not copy debugging symbols from the source file.
-
-`-x'
-`--discard-all'
-     Do not copy non-global symbols from the source file.
-
-`-X'
-`--discard-locals'
-     Do not copy compiler-generated local symbols.  (These usually
-     start with `L' or `.'.)
-
-`-V'
-`--version'
-     Show the version number of `objcopy'.
-
-`-v'
-`--verbose'
-     Verbose output: list all object files modified.  In the case of
-     archives, `objcopy -V' lists all members of the archive.
-
-`--help'
-     Show a summary of the options to `objcopy'.
-
-
-File: binutils.info,  Node: objdump,  Next: ranlib,  Prev: objcopy,  Up: Top
-
-objdump
-*******
-
-     objdump [ -a ]  [ -b BFDNAME ]  [ -d ]  [ -f ]
-             [ -h | --header ]  [ -i ]  [ -j SECTION ]  [ -l ]
-             [ -m MACHINE ]  [ -r | --reloc ]  [ -s ]  [ --stabs ]
-             [ -t | --syms ]  [ -x ]  [ --version ]  [ --help ]
-             OBJFILE...
-
-   `objdump' displays information about one or more object files.  The
-options control what particular information to display.  This
-information is mostly useful to programmers who are working on the
-compilation tools, as opposed to programmers who just want their
-program to compile and work.
-
-   OBJFILE... are the object files to be examined.  When you specify
-archives, `objdump' shows information on each of the member object
-files.
-
-   The long and short forms of options, shown here as alternatives, are
-equivalent.  At least one option besides `-l' must be given.
-
-`-a'
-     If any of the OBJFILE files are archives, display the archive
-     header information (in a format similar to `ls -l').  Besides the
-     information you could list with `ar tv', `objdump -a' shows the
-     object file format of each archive member.
-
-`-b BFDNAME'
-     Specify that the object-code format for the object files is
-     BFDNAME.  This option may not be necessary; OBJDUMP can
-     automatically recognize many formats.
-
-     For example,
-          objdump -b oasys -m vax -h fu.o
-
-     displays summary information from the section headers (`-h') of
-     `fu.o', which is explicitly identified (`-m') as a VAX object file
-     in the format produced by Oasys compilers.  You can list the
-     formats available with the `-i' option.
-
-`-d'
-     Disassemble.  Display the assembler mnemonics for the machine
-     instructions from OBJFILE.
-
-`-f'
-     File header.  Display summary information from the overall header
-     of each of the OBJFILE files.
-
-`-h'
-`--header'
-     Header.  Display summary information from the section headers of
-     the object file.
-
-`--help'
-     Print a summary of the options to `objdump' and exit.
-
-`-i'
-     Display a list showing all architectures and object formats
-     available for specification with `-b' or `-m'.
-
-`-j NAME'
-     Display information only for section NAME.
-
-`-l'
-     Label the display (using debugging information) with the source
-     filename and line numbers corresponding to the object code shown.
-
-`-m MACHINE'
-     Specify that the object files OBJFILE are for architecture
-     MACHINE.  You can list available architectures using the `-i'
-     option.
-
-`-r'
-`--reloc'
-     Relocation.  Print the relocation entries of the file.
-
-`-s'
-     Display the full contents of any sections requested.
-
-`--stabs'
-     Display the full contents of any sections requested.  Display the
-     contents of the .stab and .stab.index and .stab.excl sections from
-     an ELF file.  This is only useful on systems (such as Solaris 2.0)
-     in which `.stab' debugging symbol-table entries are carried in an
-     ELF section.  In most other file formats, debugging symbol-table
-     entries are interleaved with linkage symbols, and are visible in
-     the `--syms' output.
-
-`-t'
-`--syms'
-     Symbol Table.  Print the symbol table entries of the file.  This
-     is similar to the information provided by the `nm' program.
-
-`--version'
-     Print the version number of `objdump' and exit.
-
-`-x'
-     Display all available header information, including the symbol
-     table and relocation entries.  Using `-x' is equivalent to
-     specifying all of `-a -f -h -r -t'.
-
-
-File: binutils.info,  Node: ranlib,  Next: size,  Prev: objdump,  Up: Top
-
-ranlib
-******
-
-     ranlib [-vV] ARCHIVE
-
-   `ranlib' generates an index to the contents of an archive and stores
-it in the archive.  The index lists each symbol defined by a member of
-an archive that is a relocatable object file.
-
-   You may use `nm -s' or `nm --print-armap' to list this index.
-
-   An archive with such an index speeds up linking to the library and
-allows routines in the library to call each other without regard to
-their placement in the archive.
-
-   The GNU `ranlib' program is another form of GNU `ar'; running
-`ranlib' is completely equivalent to executing `ar -s'.  *Note ar::.
-
-`-v'
-`-V'
-     Show the version number of `ranlib'.
-
-
-File: binutils.info,  Node: size,  Next: strings,  Prev: ranlib,  Up: Top
-
-size
-****
-
-     size [ -A | -B | --format=COMPATIBILITY ]
-          [ --help ]  [ -d | -o | -x | --radix=NUMBER ]
-          [ --target=BFDNAME ]  [ -V | --version ]
-          OBJFILE...
-
-   The GNU `size' utility lists the section sizes--and the total
-size--for each of the object or archive files OBJFILE in its argument
-list.  By default, one line of output is generated for each object file
-or each module in an archive.
-
-   OBJFILE... are the object files to be examined.
-
-   The command line options have the following meanings:
-
-`-A'
-`-B'
-`--format=COMPATIBILITY'
-     Using one of these options, you can choose whether the output from
-     GNU `size' resembles output from System V `size' (using `-A', or
-     `--format=sysv'), or Berkeley `size' (using `-B', or
-     `--format=berkeley').  The default is the one-line format similar
-     to Berkeley's.
-
-     Here is an example of the Berkeley (default) format of output from
-     `size':
-          size --format Berkeley ranlib size
-          text    data    bss     dec     hex     filename
-          294880  81920   11592   388392  5ed28   ranlib
-          294880  81920   11888   388688  5ee50   size
-
-     This is the same data, but displayed closer to System V
-     conventions:
-
-          size --format SysV ranlib size
-          ranlib  :
-          section         size         addr
-          .text         294880         8192
-          .data          81920       303104
-          .bss           11592       385024
-          Total         388392
-          
-          
-          size  :
-          section         size         addr
-          .text         294880         8192
-          .data          81920       303104
-          .bss           11888       385024
-          Total         388688
-
-`--help'
-     Show a summary of acceptable arguments and options.
-
-`-d'
-`-o'
-`-x'
-`--radix=NUMBER'
-     Using one of these options, you can control whether the size of
-     each section is given in decimal (`-d', or `--radix=10'); octal
-     (`-o', or `--radix=8'); or hexadecimal (`-x', or `--radix=16').
-     In `--radix=NUMBER', only the three values (8, 10, 16) are
-     supported.  The total size is always given in two radices; decimal
-     and hexadecimal for `-d' or `-x' output, or octal and hexadecimal
-     if you're using `-o'.
-
-`--target=BFDNAME'
-     Specify that the object-code format for OBJFILE is BFDNAME.  This
-     option may not be necessary; `size' can automatically recognize
-     many formats.  *Note objdump::, for information on listing
-     available formats.
-
-`-V'
-`--version'
-     Display the version number of `size'.
-
-
-File: binutils.info,  Node: strings,  Next: strip,  Prev: size,  Up: Top
-
-strings
-*******
-
-     strings [-afov] [-MIN-LEN] [-n MIN-LEN] [-t RADIX] [-]
-             [--all] [--print-file-name] [--bytes=MIN-LEN]
-             [--radix=RADIX] [--help] [--version] FILE...
-
-   For each FILE given, GNU `strings' prints the printable character
-sequences that are at least 4 characters long (or the number given with
-the options below) and are followed by a NUL or newline character.  By
-default, it only prints the strings from the initialized data sections
-of object files; for other types of files, it prints the strings from
-the whole file.
-
-   `strings' is mainly useful for determining the contents of non-text
-files.
-
-`-a'
-`--all'
-`-'
-     Do not scan only the initialized data section of object files; scan
-     the whole files.
-
-`-f'
-`--print-file-name'
-     Print the name of the file before each string.
-
-`--help'
-     Print a summary of the program usage on the standard output and
-     exit.
-
-`-MIN-LEN'
-`-n MIN-LEN'
-`--bytes=MIN-LEN'
-     Print sequences of characters that are at least MIN-LEN characters
-     long, instead of the default 4.
-
-`-o'
-     Like `-t o'.  Some other versions of `strings' have `-o' act like
-     `-t d' instead.  Since we can not be compatible with both ways, we
-     simply chose one.
-
-`-t RADIX'
-`--radix=RADIX'
-     Print the offset within the file before each string.  The single
-     character argument specifies the radix of the offset--`o' for
-     octal, `x' for hexadecimal, or `d' for decimal.
-
-`-v'
-`--version'
-     Print the program version number on the standard output and exit.
-
-
-File: binutils.info,  Node: strip,  Next: c++filt,  Prev: strings,  Up: Top
-
-strip
-*****
-
-     strip [ -F FORMAT | --format=FORMAT | --target=FORMAT ]
-           [ -I FORMAT | --input-format=FORMAT ]
-           [ -O FORMAT | --output-format=FORMAT ]
-           [ -s | --strip-all ] [ -S | -g | --strip-debug ]
-           [ -x | --discard-all ] [ -X | --discard-locals ]
-           [ -v | --verbose ]  [ -V | --version ]  [ --help ]
-           OBJFILE...
-
-   GNU `strip' discards all symbols from object files OBJFILE.  The
-list of object files may include archives.  At least one object file
-must be given.
-
-   `strip' modifies the files named in its argument, rather than
-writing modified copies under different names.
-
-`-F FORMAT'
-`--format=FORMAT'
-`--target=FORMAT'
-     Treat the original OBJFILE as a file with the object code format
-     FORMAT, and rewrite it in the same format.
-
-`--help'
-     Show a summary of the options to `strip' and exit.
-
-`-I FORMAT'
-`--input-format=FORMAT'
-     Treat the original OBJFILE as a file with the object code format
-     FORMAT.
-
-`-O FORMAT'
-`--output-format=FORMAT'
-     Replace OBJFILE with a file in the output format FORMAT.
-
-`-s'
-`--strip-all'
-     Remove all symbols.
-
-`-g'
-`-S'
-`--strip-debug'
-     Remove debugging symbols only.
-
-`-x'
-`--discard-all'
-     Remove non-global symbols.
-
-`-X'
-`--discard-locals'
-     Remove compiler-generated local symbols.  (These usually start
-     with `L' or `.'.)
-
-`-V'
-`--version'
-     Show the version number for `strip'.
-
-`-v'
-`--verbose'
-     Verbose output: list all object files modified.  In the case of
-     archives, `strip -v' lists all members of the archive.
-
-
-File: binutils.info,  Node: c++filt,  Next: Index,  Prev: strip,  Up: Top
-
-c++filt
-*******
-
-     c++filt [ -_ | --strip-underscores ]
-             [ -s FORMAT | --format=FORMAT ]
-             [ --help ]  [ --version ]  [ SYMBOL... ]
-
-   The C++ language provides function overloading, which means that you
-can write many functions with the same name (providing each takes
-parameters of different types).  All C++ function names are encoded
-into a low-level assembly label (this process is known as "mangling").
-The `c++filt' program does the inverse mapping: it decodes
-("demangles") low-level names into user-level names so that the linker
-can keep these overloaded functions from clashing.
-
-   Every alphanumeric word (consisting of letters, digits, underscores,
-dollars, or periods) seen in the input is a potential label.  If the
-label decodes into a C++ name, the C++ name replaces the low-level name
-in the output.
-
-   You can use `c++filt' to decipher individual symbols:
-
-     c++filt SYMBOL
-
-   If no SYMBOL arguments are given, `c++filt' reads symbol names from
-the standard input and writes the demangled names to the standard
-output.  All results are printed on the standard output.
-
-`-_'
-`--strip-underscores'
-     On some systems, both the C and C++ compilers put an underscore in
-     front of every name.  For example, the C name `foo' gets the
-     low-level name `_foo'.  This option removes the initial underscore.
-
-`-s FORMAT'
-`--format=FORMAT'
-     GNU `nm' can decode three different methods of mangling, used by
-     different C++ compilers.  The argument to this option selects which
-     method it uses:
-
-    `gnu'
-          the one used by the GNU compiler (the default method)
-
-    `lucid'
-          the one used by the Lucid compiler
-
-    `arm'
-          the one specified by the C++ Annotated Reference Manual
-
-`--help'
-     Print a summary of the options to `c++filt' and exit.
-
-`--version'
-     Print the version number of `c++filt' and exit.
-
-     *Warning:* `c++filt' is a new utility, and the details of its user
-     interface are subject to change in future releases.  In particular,
-     a command-line option may be required in the the future to decode
-     a name passed as an argument on the command line; in other words,
-
-          c++filt SYMBOL
-
-     may in a future release become
-
-          c++filt OPTION SYMBOL
-
-
-File: binutils.info,  Node: Index,  Prev: c++filt,  Up: Top
-
-Index
-*****
-
-* Menu:
-
-* .stab:                                objdump.
-* ar compatibility:                     ar.
-* nm compatibility:                     nm.
-* nm compatibility:                     nm.
-* nm format:                            nm.
-* nm format:                            nm.
-* size display format:                  size.
-* size number format:                   size.
-* all header information, object file:  objdump.
-* ar:                                   ar.
-* architecture:                         objdump.
-* architectures available:              objdump.
-* archive contents:                     ranlib.
-* archive headers:                      objdump.
-* archives:                             ar.
-* c++filt:                              c++filt.
-* collections of files:                 ar.
-* compatibility, ar:                    ar.
-* contents of archive:                  ar-cmdline.
-* creating archives:                    ar-cmdline.
-* dates in archive:                     ar-cmdline.
-* debug symbols:                        objdump.
-* debugging symbols:                    nm.
-* deleting from archive:                ar-cmdline.
-* demangling C++ symbols:               c++filt.
-* demangling C++ symbols:               nm.
-* disassembling object code:            objdump.
-* discarding symbols:                   strip.
-* ELF object file format:               objdump.
-* external symbols:                     nm.
-* external symbols:                     nm.
-* extract from archive:                 ar-cmdline.
-* file name:                            nm.
-* header information, all:              objdump.
-* input file name:                      nm.
-* libraries:                            ar.
-* listings strings:                     strings.
-* machine instructions:                 objdump.
-* moving in archive:                    ar-cmdline.
-* MRI compatibility, ar:                ar-scripts.
-* name duplication in archive:          ar-cmdline.
-* name length:                          ar.
-* nm:                                   nm.
-* objdump:                              objdump.
-* object code format:                   nm.
-* object code format:                   objdump.
-* object code format:                   size.
-* object file header:                   objdump.
-* object file information:              objdump.
-* object file sections:                 objdump.
-* object formats available:             objdump.
-* operations on archive:                ar-cmdline.
-* printing from archive:                ar-cmdline.
-* printing strings:                     strings.
-* quick append to archive:              ar-cmdline.
-* radix for section sizes:              size.
-* ranlib:                               ranlib.
-* relative placement in archive:        ar-cmdline.
-* relocation entries, in object file:   objdump.
-* removing symbols:                     strip.
-* repeated names in archive:            ar-cmdline.
-* replacement in archive:               ar-cmdline.
-* scripts, ar:                          ar-scripts.
-* section headers:                      objdump.
-* section information:                  objdump.
-* section sizes:                        size.
-* sections, full contents:              objdump.
-* size:                                 size.
-* sorting symbols:                      nm.
-* source file name:                     nm.
-* source filenames for object files:    objdump.
-* stab:                                 objdump.
-* strings:                              strings.
-* strings, printing:                    strings.
-* strip:                                strip.
-* symbol index:                         ranlib.
-* symbol index:                         ar.
-* symbol index, listing:                nm.
-* symbol table entries, printing:       objdump.
-* symbols:                              nm.
-* symbols, discarding:                  strip.
-* undefined symbols:                    nm.
-* Unix compatibility, ar:               ar-cmdline.
-* updating an archive:                  ar-cmdline.
-* version:                              Top.
-* writing archive index:                ar-cmdline.
-
-
-
-Tag Table:
-Node: Top918
-Node: ar1769
-Node: ar-cmdline3935
-Node: ar-scripts10370
-Node: nm16051
-Node: objcopy19624
-Node: objdump21994
-Node: ranlib25572
-Node: size26306
-Node: strings28993
-Node: strip30625
-Node: c++filt32286
-Node: Index34647
-
-End Tag Table