- May 04, 2010
-
-
Wolfram Sang authored
After discovering that a lot of i2c-drivers leave the pointer to their clientdata dangling, it was decided to let the core handle this issue. It is assumed that the core may access the private data after remove() as there are no guarantees for the lifetime of such pointers anyhow (see thread starting at http://lkml.org/lkml/2010/3/21/68 ) Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Jean Delvare <khali@linux-fr.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: remove bad auth_x kmem_cache ceph: fix lockless caps check ceph: clear dir complete, invalidate dentry on replayed rename ceph: fix direct io truncate offset ceph: discard incoming messages with bad seq # ceph: fix seq counting for skipped messages ceph: add missing #includes ceph: fix leaked spinlock during mds reconnect ceph: print more useful version info on module load ceph: fix snap realm splits ceph: clear dir complete on d_move
-
Sage Weil authored
It's useless, since our allocations are already a power of 2. And it was allocated per-instance (not globally), which caused a name collision when we tried to mount a second file system with auth_x enabled. Signed-off-by:Sage Weil <sage@newdream.net>
-
Sage Weil authored
The __ variant requires caller to hold i_lock. Signed-off-by: -
Sage Weil authored
If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by: -
Sage Weil authored
truncate_inode_pages_range wants the end offset to align with the last byte in a page. Signed-off-by: -
Sage Weil authored
We can get old message seq #'s after a tcp reconnect for stateful sessions (i.e., the MDS). If we get a higher seq #, that is an error, and we shouldn't see any bad seq #'s for stateless (mon, osd) connections. Signed-off-by: -
Sage Weil authored
Increment in_seq even when the message is skipped for some reason. Signed-off-by: -
Sage Weil authored
Signed-off-by: -
Sage Weil authored
Signed-off-by: -
Sage Weil authored
Decouple the client version from the server side. Print relevant protocol and map version info instead. Signed-off-by: -
Sage Weil authored
The snap realm split was checking i_snap_realm, not the list_head, to determine if an inode belonged in the new realm. The check always failed, which meant we always moved the inode, corrupting the old realm's list and causing various crashes. Also wait to release old realm reference to avoid possibility of use after free. Signed-off-by: -
Sage Weil authored
d_move() reorders the d_subdirs list, breaking the readdir result caching. Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on rename. Signed-off-by:
-
- May 03, 2010
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.
-
Ryusuke Konishi authored
As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set. And nilfs does not set s_bdi anywhere. I noticed this problem by the warning introduced by the recent commit 5129a469 ("Catch filesystem lacking s_bdi"). WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e() Hardware name: PowerEdge 2850 Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38 Call Trace: [<c1028422>] warn_slowpath_common+0x60/0x90 [<c102845f>] warn_slowpath_null+0xd/0x10 [<c1095936>] vfs_kern_mount+0xc5/0x14e [<c1095a03>] do_kern_mount+0x32/0xbd [<c10a811e>] do_mount+0x671/0x6d0 [<c1073794>] ? __get_free_pages+0x1f/0x21 [<c10a684f>] ? copy_mount_options+0x2b/0xe2 [<c107b634>] ? strndup_user+0x48/0x67 [<c10a81de>] sys_mount+0x61/0x8f [<c100280c>] sysenter_do_call+0x12/0x32 This ensures to set s_bdi for nilfs and fixes the sync silent failure. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wim Van Sebroeck authored
The WATCHDOG_TIMEOUT macro does not exist. The default timeout value is WDT_TIMEOUT. Fix the MODULE_PARM_DESC so that the code can compile again. reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
- May 01, 2010
-
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits) MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jump MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds. MIPS: Loongson 2F: Enable fixups of the latest binutils MIPS: Loongson: Add CPU_LOONGSON2F_WORKAROUNDS MIPS: Kconfig: Make Broadcom SoC support naming consistent MIPS: BCM63xx: Update defconfig MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=m STAGING: octeon-ethernet: Use proper phy addresses for Movidis hardware. NET: mdio-octeon: Enable the hardware before using it. I2C: Fix section mismatch errors in i2c-octeon.c MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro. MIPS: Loongson: Fix phys_mem_access_prot() check MIPS: Loongson: Fix find_vga_mem_init() MIPS: Loongson: Fix typo in gdium mach type string. MIPS: Use CKSEG1ADDR for uncached handler MIPS: Check for accesses beyond the...
-
Wu Zhangjin authored
The -mfix-loongson2f-jump option provided by latest CVS binutils have fixed the out-of-order issue of Loongson-2F described in chapter 15 of the Loongson2F User Manual [1, 2], but introduced some problems. The option changes all of the jump target to "addr & 0xcfffffff" through the at($1) register, but for the reboot address of Loongson 2F 0xbfc00000 this is wrong. Avoids the problem via telling the assembler to not use the $at register. [1] Loongson2F User Manual (Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [2] English Version of Chapter 15: http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Reported-and-tested-by:Liu Shiwei <liushiwei@gmail.com> Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1109/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
Signed-off-by:
-
Wu Zhangjin authored
With the "Fixups of Loongson2F" patch [1] having been applied to binutils for binutils 2.20.1 we now can use it's time to enable the options provided by the patch to compile the kernel. Without these fixups, the system may hang if the erratum is triggered. For more information on these fixups please refer to the following references. [1] "Fixups of Loongson2F" patch for binutils(actually for gas) http://sourceware.org/ml/binutils/2009-11/msg00387.html [2] Chapter 15 of "Loongson2F User Manual"(Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [3] Chapter 15 of the English version Loongson 2F User Manual http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Signed-off-by:Zhang Le <r0bertz@gentoo.org> Signed-off-by:
-
Wu Zhangjin authored
As documented in the Loongson 2F User Manual [2, 3], the old Loongson2F series (2F01 / 2F02) have the NOP & JUMP issues which requires workarounds in the kernel and binutils. This issue has been rectified in Loongson 2F series 2F03 so no workarounds needed. Now that the workarounds [1] adding the the -mfix-loongson2f-nop and -mfix-loongson2f-jump options have been comitted to the binutils the CVS repository), we can add the workarounds in the kernel. The workarounds have no significant side effect on the system but may decrease performance so we control them through a a new CPU_LOONGSON2F_WORKAROUNDS config option allowing the users to only enable it as necessary. [1] "Fixups of Loongson2F" patch for binutils(actually for gas) http://sourceware.org/ml/binutils/2009-11/msg00387.html [2] Chapter 15 of "Loongson2F User Manual"(Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [3] English Version of the above chapter 15 http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Signed-off-by: -
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1082/ Signed-off-by:
-
Florian Fainelli authored
the defconfig was out-of-sync since 2.6.30-rc6, update it with the new symbols and enable BCM6338, 6345, wireless, b43 driver and LEDs support. Signed-off-by:
-
Wu Zhangjin authored
When the oprofile is compiled as a module do_IRQ() is not called in arch/mips/loongson/lemote-2f/irq.c due to a wrong #ifdef there. Signed-off-by:
-
David Daney authored
Signed-off-by:
David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/1091/ Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
David Daney authored
In some cases the mdio bus is not enabled at the time of probing. This prevents anything from working, so we will enable it before trying to use it, and disable it when the driver is removed. Signed-off-by:
-
David Daney authored
Signed-off-by:
-
Arnaud Patard authored
There's a typo in the LOONGSON_ADDRWIN_CFG macro. The cpu window mmap register address should contain the destination parameters not the source one. This has not been noticed because the code is only using source = destination. Signed-off-by:
Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1162/ Signed-off-by:
-
Arnaud Patard authored
The check used to determine if uncached accelerated should be used or not is wrong. The parenthesis are misplaced and making the test fail. Signed-off-by:
-
Richard LIU authored
This allows to use all display device for instance DISPLAY_OTHER like SM501. Signed-off-by:
-
Arnaud Patard authored
It's not "gidum" but "gdium". Signed-off-by:
-
Sebastian Andrzej Siewior authored
"MIPS: Calculate proper ebase value for 64-bit kernels" 9af43ea080dd5d6c7b34f38261780e5dd43537bc (lmo) rsp. f6be75d0 (kernel.org) broke some 64-bit MIPS systems. Before this we were using XKPHYS/cached as ebase and computed the uncached xphsys/unchached address for that area. After that commit ebase became a 32-bit compat address and convert does not work anymore. We now should use CKSEG1 for this. CKSEG1ADDR does just that in 32-bit and 64-bit. Signed-off-by:
Sebastian Andrzej Siewior <sebastian@breakpoint.cc> To: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1149/ Signed-off-by:
-
David Daney authored
For some combinations of PAGE_SIZE and vmbits, it is possible to have userspace access that are beyond what is covered by the PGD, but within vmbits. Such an access would cause the TLB refill handler to load garbage values for PMD and PTE potentially giving userspace access to parts of the physical address space to which it is not entitled. In the TLB refill hot path, we add a single dsrl instruction so we can check if any bits outside of the range covered by the PGD are set. In the vmalloc side we then separate the bad case from the normal vmalloc case and call tlb_do_page_fault_0 if warranted. This slows us down a bit, but has the benefit of yielding deterministic behavior. [Ralf: Fixed build error for 32-bit kernels.] [Ralf: Folded lmo commit c8c0e22b2aa3982852b44279638ef37f9aa31b7d into this commit.] Signed-off-by:
-
David Daney authored
This makes the code somewhat cleaner while reducing the risk of shift amount overflows when various page table related options are changed. Signed-off-by:
-
David Daney authored
This allows us to clean up the code by not having to explicitly code checks for shift amounts greater than 32. Signed-off-by:
-
Yury Polyanskiy authored
The MIPS implementation of die() forgets to call notify_die() and thus notifiers registered via register_die_notifier() are not called. This results in kgdb not being activated on exceptions. The only subtlety is that notify_die declares its regs argument w/o const, so the const had to be removed from mips die() as well. [Ralf: Fixed build error for SGI IP22 and IP28 platforms.] Signed-off-by:
Yury Polyanskiy <ypolyans@princeton.edu> Cc: linux-mips@linux-mips.org Patchworks: http://patchwork.linux-mips.org/patch/1142/ Acked-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
According to include/asm/sibyte/swarm.h both systems provide a platform device for the ide controler. Until now the IDE subsystem was used which is deprecated by now. The same structure can be used with the PATA driver. Signed-off-by:
Sebastian Andrzej Siewior <sebatian@breakpoint.cc> Cc: tbm@cyrius.com Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1127/ Signed-off-by:
-
Manuel Lauss authored
Same issues as SD card detection: One of both is always triggering and the handlers take care to shut it up and enable the other. To avoid messages about "unbalanced interrupt enable/disable" they must not be automatically enabled when initally requested. This was not an issue with the db1200_defconfig due to fortunate timings; on a build without network chip support the warnings appear. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1133/ Signed-off-by:
-
Sebastian Andrzej Siewior authored
| arch/mips/pci/pci-sb1250.c: In function sb1250_pcibios_init: | arch/mips/pci/pci-sb1250.c:257: warning: assignment makes integer from pointer without a cast | arch/mips/pci/pci-sb1250.c:285: error: MAX_NR_CONSOLES undeclared (first use in this function) | arch/mips/pci/pci-sb1250.c:285: error: (Each undeclared identifier is reported only once | arch/mips/pci/pci-sb1250.c:285: error: for each function it appears in.) Signed-off-by:
-
Sebastian Andrzej Siewior authored
|arch/mips/sibyte/swarm/setup.c:153: | warning: large integer implicitly truncated to unsigned type The field was changed in d9b26352 aka ("x86, setup: Store the boot cursor state"). This patch changes the values back they way they were before this extra field got introduced. While here, the other two boards are also converted to C99 initializer. Signed-off-by:
-
