There are two bugs in the follow-MAC code:
 * it treats the radiotap header as the 802.11 header
   (therefore it can't possibly work)
 * it doesn't verify that the skb data it accesses is actually
   present in the header, which is mitigated by the first point

Fix this by moving all of this out into a separate function.
This function copies the data it needs using skb_copy_bits()
to make sure it can be accessed if it's paged, and offsets
that by the possibly present vendor radiotap header.

This also makes all those conditions more readable.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Ido Schimmel says:

====================
bridge: Fix kernel oops during bridge creation

First patch adds a missing ndo_uninit() in the bridge driver, which is a
prerequisite for the second patch that actually fixes the oops.

Please consider both patches for 4.4.y, 4.9.y and 4.10.y
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Peter reported a kernel oops when executing the following command:

$ ip link add name test type bridge vlan_default_pvid 1

[13634.939408] BUG: unable to handle kernel NULL pointer dereference at
0000000000000190
[13634.939436] IP: __vlan_add+0x73/0x5f0
[...]
[13634.939783] Call Trace:
[13634.939791]  ? pcpu_next_unpop+0x3b/0x50
[13634.939801]  ? pcpu_alloc+0x3d2/0x680
[13634.939810]  ? br_vlan_add+0x135/0x1b0
[13634.939820]  ? __br_vlan_set_default_pvid.part.28+0x204/0x2b0
[13634.939834]  ? br_changelink+0x120/0x4e0
[13634.939844]  ? br_dev_newlink+0x50/0x70
[13634.939854]  ? rtnl_newlink+0x5f5/0x8a0
[13634.939864]  ? rtnl_newlink+0x176/0x8a0
[13634.939874]  ? mem_cgroup_commit_charge+0x7c/0x4e0
[13634.939886]  ? rtnetlink_rcv_msg+0xe1/0x220
[13634.939896]  ? lookup_fast+0x52/0x370
[13634.939905]  ? rtnl_newlink+0x8a0/0x8a0
[13634.939915]  ? netlink_rcv_skb+0xa1/0xc0
[13634.939925]  ? rtnetlink_rcv+0x24/0x30
[13634.939934]  ? netlink_unicast+0x177/0x220
[13634.939944]  ? netlink_sendmsg+0x2fe/0x3b0
[13634.939954]  ? _copy_from_user+0x39/0x40
[13634.939964]  ? sock_sendmsg+0x30/0x40
[13634.940159]  ? ___sys_sendmsg+0x29d/0x2b0
[13634.940326]  ? __alloc_pages_nodemask+0xdf/0x230
[13634.940478]  ? mem_cgroup_commit_charge+0x7c/0x4e0
[13634.940592]  ? mem_cgroup_try_charge+0x76/0x1a0
[13634.940701]  ? __handle_mm_fault+0xdb9/0x10b0
[13634.940809]  ? __sys_sendmsg+0x51/0x90
[13634.940917]  ? entry_SYSCALL_64_fastpath+0x1e/0xad

The problem is that the bridge's VLAN group is created after setting the
default PVID, when registering the netdevice and executing its
ndo_init().

Fix this by changing the order of both operations, so that
br_changelink() is only processed after the netdevice is registered,
when the VLAN group is already initialized.

Fixes: b6677449

 ("bridge: netlink: call br_changelink() during br_dev_newlink()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Peter V. Saveliev <peter@svinota.eu>
Tested-by: Peter V. Saveliev <peter@svinota.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

While the bridge driver implements an ndo_init(), it was missing a
symmetric ndo_uninit(), causing the different de-initialization
operations to be scattered around its dellink() and destructor().

Implement a symmetric ndo_uninit() and remove the overlapping operations
from its dellink() and destructor().

This is a prerequisite for the next patch, as it allows us to have a
proper cleanup upon changelink() failure during the bridge's newlink().

Fixes: b6677449

 ("bridge: netlink: call br_changelink() during br_dev_newlink()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It took me quite some time to figure out how this was linked,
so in order to save the next person the effort of finding it
add a comment in __bpf_prog_run() that indicates what exactly
determines that a program can access the ctx == skb.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the (very unlikely) case a passive socket becomes a listener,
we do not want to duplicate its saved SYN headers.

This would lead to double frees, use after free, and please hackers and
various fuzzers

Tested:
    0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, IPPROTO_TCP, TCP_SAVE_SYN, [1], 4) = 0
   +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0

   +0 bind(3, ..., ...) = 0
   +0 listen(3, 5) = 0

   +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7>
   +0 > S. 0:0(0) ack 1 <...>
  +.1 < . 1:1(0) ack 1 win 257
   +0 accept(3, ..., ...) = 4

   +0 connect(4, AF_UNSPEC, ...) = 0
   +0 close(3) = 0
   +0 bind(4, ..., ...) = 0
   +0 listen(4, 5) = 0

   +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7>
   +0 > S. 0:0(0) ack 1 <...>
  +.1 < . 1:1(0) ack 1 win 257

Fixes: cd8ae852

 ("tcp: provide SYN headers for passive connections")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.12-20170404' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can



Marc Kleine-Budde says:

====================
pull-request: can 2017-04-04

this is a pull request of two patches for net/master.

The first patch by Markus Marb fixes a register read access in the ifi driver.
The second patch by Geert Uytterhoeven for the rcar driver remove the printing
of a kernel virtual address.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Because TCP_MIB_OUTRSTS is an important count, so always increase it
whatever send it successfully or not.

Now move the increment of TCP_MIB_OUTRSTS to the top of
tcp_send_active_reset to make sure it is increased always even though
fail to alloc skb.

Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guillaume Nault says:

====================
l2tp: fix error handling of PPPoL2TP socket options

Fix pppol2tp_[gs]etsockopt() so that they don't ignore errors returned
by their helper functions.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

pppol2tp_getsockopt() doesn't take into account the error code returned
by pppol2tp_tunnel_getsockopt() or pppol2tp_session_getsockopt(). If
error occurs there, pppol2tp_getsockopt() continues unconditionally and
reports erroneous values.

Fixes: fd558d18

 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

pppol2tp_setsockopt() unconditionally overwrites the error value
returned by pppol2tp_tunnel_setsockopt() or
pppol2tp_session_setsockopt(), thus hiding errors from userspace.

Fixes: fd558d18

 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recent extension of F-RTO 89fe18e4 ("tcp: extend F-RTO
to catch more spurious timeouts") interacts badly with certain
broken middle-boxes.  These broken boxes modify and falsely raise
the receive window on the ACKs. During a timeout induced recovery,
F-RTO would send new data packets to probe if the timeout is false
or not. Since the receive window is falsely raised, the receiver
would silently drop these F-RTO packets. The recovery would take N
(exponentially backoff) timeouts to repair N packet losses.  A TCP
performance killer.

Due to this unfortunate situation, this patch removes this extension
to revert F-RTO back to the RFC specification.

Fixes: 89fe18e4

 ("tcp: extend F-RTO to catch more spurious timeouts")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f6988cb6

 ("team: don't call netdev_change_features under
team->lock") fixed the issue calling netdev_change_features under
team->lock for team_compute_features.

But there are still two places where it calls netdev_change_features
under team->lock, team_port_add and team_port_del. It may cause a
dead lock when the slave port with LRO enabled is added.

This patch is to fix this dead lock by moving netdev_change_features
out of team_port_add and team_port_del, and call it after unlocking
the team lock.

Reported-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now sctp doesn't check sock's state before listening on it. It could
even cause changing a sock with any state to become a listening sock
when doing sctp_listen.

This patch is to fix it by checking sock's state in sctp_listen, so
that it will listen on the sock with right state.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Coverity reports:

** CID 751368:  Null pointer dereferences  (FORWARD_NULL)
/drivers/net/usb/usbnet.c: 1925 in __usbnet_read_cmd()

________________________________________________________________________________________________________
*** CID 751368:  Null pointer dereferences  (FORWARD_NULL)
/drivers/net/usb/usbnet.c: 1925 in __usbnet_read_cmd()
1919     EXPORT_SYMBOL(usbnet_link_change);
1920
1921     /*-------------------------------------------------------------------------*/
1922     static int __usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1923                                 u16 value, u16 index, void *data, u16 size)
1924     {
>>>     CID 751368:  Null pointer dereferences  (FORWARD_NULL)
>>>     Assigning: "buf" = "NULL".
1925            void *buf = NULL;
1926            int err = -ENOMEM;
1927
1928            netdev_dbg(dev->net, "usbnet_read_cmd cmd=0x%02x reqtype=%02x"
1929                       " value=0x%04x index=0x%04x size=%d\n",
1930                       cmd, reqtype, value, index, size);

** CID 751370:  Null pointer dereferences  (FORWARD_NULL)
/drivers/net/usb/usbnet.c: 1952 in __usbnet_write_cmd()

________________________________________________________________________________________________________
*** CID 751370:  Null pointer dereferences  (FORWARD_NULL)
/drivers/net/usb/usbnet.c: 1952 in __usbnet_write_cmd()
1946     }
1947
1948     static int __usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1949                                  u16 value, u16 index, const void *data,
1950                                  u16 size)
1951     {
>>>     CID 751370:  Null pointer dereferences  (FORWARD_NULL)
>>>     Assigning: "buf" = "NULL".
1952            void *buf = NULL;
1953            int err = -ENOMEM;
1954
1955            netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
1956                       " value=0x%04x index=0x%04x size=%d\n",
1957                       cmd, reqtype, value, index, size);

** CID 1325026:  Null pointer dereferences  (FORWARD_NULL)
/drivers/net/usb/ch9200.c: 143 in control_write()

It is valid to offer commands without a buffer, but then you need a size
of zero. This should actually be checked.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dmitry reported a crash when injecting faults in
attach_one_default_qdisc() and dev->qdisc is still
a noop_disc, the check before qdisc_hash_add() fails
to catch it because it tests NULL. We should test
against noop_qdisc since it is the default qdisc
at this point.

Fixes: 59cc1f61

 ("net: sched: convert qdisc linked list to hashtable")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to
ip_route_input when iif is given. If a multipath route is present for
the designated destination, ip_multipath_icmp_hash ends up being called,
which uses the source/destination addresses within the skb to calculate
a hash. However, those are not set in the synthetic skb, causing it to
return an arbitrary and incorrect result.

Instead, use UDP, which gets no such special treatment.

Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Reject invalid updates to netfilter expectation policies, from Pablo
    Neira Ayuso.

 2) Fix memory leak in nfnl_cthelper, from Jeffy Chen.

 3) Don't do stupid things if we get a neigh_probe() on a neigh entry
    whose ops lack a solicit method. From Eric Dumazet.

 4) Don't transmit packets in r8152 driver when the carrier is off, from
    Hayes Wang.

 5) Fix ipv6 packet type detection in aquantia driver, from Pavel
    Belous.

 6) Don't write uninitialized data into hw registers in bna driver, from
    Arnd Bergmann.

 7) Fix locking in ping_unhash(), from Eric Dumazet.

 8) Make BPF verifier range checks able to understand certain sequences
    emitted by LLVM, from Alexei Starovoitov.

 9) Fix use after free in ipconfig, from Mark Rutland.

10) Fix refcount leak on force commit in openvswitch, from Jarno
    Rajahalme.

11) Fix various overflow checks in AF_PACKET, from Andrey Konovalov.

...

We should unregister the net_device first, before we give back
our reference on xdp_prog.  Otherwise xdp_prog may be freed
before .ndo_stop() disabled the datapath.  Found by code inspection.

Fixes: ecd63a02

 ("nfp: add XDP support in the driver")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the reordering SNMP counters only increase if a connection
sees a higher degree then it has previously seen. It ignores if the
reordering degree is not greater than the default system threshold.
This significantly under-counts the number of reordering events
and falsely convey that reordering is rare on the network.

This patch properly and faithfully records the number of reordering
events detected by the TCP stack, just like the comment says "this
exciting event is worth to be remembered". Note that even so TCP
still under-estimate the actual reordering events because TCP
requires TS options or certain packet sequences to detect reordering
(i.e. ACKing never-retransmitted sequence in recovery or disordered
 state).

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lost retransmit SNMP stat is under-counting retransmission
that uses segment offloading. This patch fixes that so all
retransmission related SNMP counters are consistent.

Fixes: 10d3be56

 ("tcp-tso: do not split TSO packets at retransmit time")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MFD bug fix from Lee Jones:
 "Increase buffer size om cros-ec to allow for SPI messages"

* tag 'mfd-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: cros-ec: Fix host command buffer size

Merge tag 'kbuild-fixes-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - hand-off primary maintainership of Kbuild

 - fix build warnings

 - fix build error when GCOV is enabled with old compiler

 - fix HAVE_ASM_GOTO check when GCC plugin is enabled

* tag 'kbuild-fixes-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  gconfig: remove misleading parentheses around a condition
  jump label: fix passing kbuild_cflags when checking for asm goto support
  Kbuild: use cc-disable-warning consistently for maybe-uninitialized
  kbuild: external module build warnings when KBUILD_OUTPUT set and W=1
  MAINTAINERS: add Masahiro Yamada as a Kbuild maintainer

This patch is almost to revert commit 02f3d4ce

 ("sctp: Adjust PMTU
updates to accomodate route invalidation."). As t->asoc can't be NULL
in sctp_transport_update_pmtu, it could get sk from asoc, and no need
to pass sk into that function.

It is also to remove some duplicated codes from that function.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For SPI, we can get up to 32 additional bytes for response preamble.
The current overhead (2 bytes) may cause problems when we try to receive
a big response. Update it to 32 bytes.

Without this fix we could see a kernel BUG when we receive a big response
from the Chrome EC when is connected via SPI.

Signed-off-by: Vic Yang <victoryang@google.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo.collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Pull late GPIO fixes from Linus Walleij:
 "Some late coming ACPI fixes for GPIO.

  We're dealing with ACPI issues here. The first is related to wake IRQs
  on Bay Trail/Cherry Trail CPUs which are common in laptops. The second
  is about proper probe deferral when reading _CRS properties.

  For my untrained eye it seems there was some quarrel between the BIOS
  and the kernel about who is supposed to deal with wakeups from GPIO
  lines"

* tag 'gpio-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  ACPI / gpio: do not fall back to parsing _CRS when we get a deferral
  gpio: acpi: Call enable_irq_wake for _IAE GpioInts with Wake set

Merge tag 'wireless-drivers-for-davem-2017-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers



Kalle Valo says:

====================
wireless-drivers fixes for 4.11

iwlwifi

* an RCU fix
* a fix for a potential out-of-bounds access crash
* a fix for IBSS which has been broken since DQA was enabled

rtlwifi

* fix scheduling while atomic regression

brcmfmac

* fix use-after-free bug found by KASAN
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Pull nios2 fix from Ley Foon Tan:

 - nios2: reserve boot memory for device tree

* tag 'nios2-v4.11-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: reserve boot memory for device tree

TI's cpsw driver handles both OF and non-OF case for phy
connect. Unfortunately of_phy_connect() returns NULL on
error while phy_connect() returns ERR_PTR().

To handle this, cpsw_slave_open() overrides the return value
from phy_connect() to make it NULL or error.

This leaves a small window, where cpsw_adjust_link() may be
invoked for a slave while slave->phy pointer is temporarily
set to -ENODEV (or some other error) before it is finally set
to NULL.

_cpsw_adjust_link() only handles the NULL case, and an oops
results when ERR_PTR() is seen by it.

Note that cpsw_adjust_link() checks PHY status for each
slave whenever it is invoked. It can so happen that even
though phy_connect() for a given slave returns error,
_cpsw_adjust_link() is still called for that slave because
the link status of another slave changed.

Fix this by using a temporary pointer to store return value
of {of_}phy_connect() and do a one-time write to slave->phy.

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reported-by: Yan Liu <yan-liu@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "This is just mostly stuff that missed rc5, from vmwgfx and msm
  drivers"

* tag 'drm-fixes-for-v4.11-rc6' of git://people.freedesktop.org/~airlied/linux:
  drm/msm: Make sure to detach the MMU during GPU cleanup
  drm/msm/hdmi: redefinitions of macros not required
  drm/msm/mdp5: Update SSPP_MAX value
  drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
  drm/msm: Don't allow zero sized buffer objects
  drm/msm: Fix wrong pointer check in a5xx_destroy
  drm/msm: adreno: fix build error without debugfs
  drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
  drm/vmwgfx: Remove getparam error message
  drm/ttm: Avoid calling drm_ht_remove from atomic context
  drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
  drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
  drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
  drm/vmwgfx: Type-check lookups of fence objects

PPP pseudo-wire type is 7 (11 is L2TP_PWTYPE_IP).

Fixes: f1f39f91

 ("l2tp: auto load type modules")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trival fix, rename HW_INTERRUT_ASSERT_SET_* to HW_INTERRUPT_ASSERT_SET_*

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Take a reference on the sessions returned by l2tp_session_find_nth()
(and rename it l2tp_session_get_nth() to reflect this change), so that
caller is assured that the session isn't going to disappear while
processing it.

For procfs and debugfs handlers, the session is held in the .start()
callback and dropped in .show(). Given that pppol2tp_seq_session_show()
dereferences the associated PPPoL2TP socket and that
l2tp_dfs_seq_session_show() might call pppol2tp_show(), we also need to
call the session's .ref() callback to prevent the socket from going
away from under us.

Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Fixes: 0ad66140 ("l2tp: Add debugfs files for dumping l2tp debug info")
Fixes: 309795f4

 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

During probe, the rcar_can driver prints:

    rcar_can e6e80000.can: device registered (regs @ e08bc000, IRQ76)

The "regs" value is a virtual address, exposing internal information,
hence stop printing it.  The (useful) physical address is already
printed as part of the device name.

Fixes: fd115931

 ("can: add Renesas R-Car CAN driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The incorrect offset was used when trying to read the RXSTCMD register.

Signed-off-by: Markus Marb <markus@marb.org>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Markus Trippelsdorf reported that after commit dcb17d22

 ("tcp: warn
on bogus MSS and try to amend it") the kernel started logging the
warning for a NIC driver that doesn't even support GRO.

It was diagnosed that it was possibly caused on connections that were
using TCP Timestamps but some packets lacked the Timestamps option. As
we reduce rcv_mss when timestamps are used, the lack of them would cause
the packets to be bigger than expected, although this is a valid case.

As this warning is more as a hint, getting a clean-cut on the
threshold is probably not worth the execution time spent on it. This
patch thus alleviates the false-positives with 2 quick checks: by
accounting for the entire TCP option space and also checking against the
interface MTU if it's available.

These changes, specially the MTU one, might mask some real positives,
though if they are really happening, it's possible that sooner or later
it will be triggered anyway.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull Xtensa fixes from Max Filippov:

 - make __pa work with uncached KSEG addresses, it fixes DMA memory
   mmapping and DMA debug

 - fix torn stack dump output

 - wire up statx syscall

* tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: wire up statx system call
  xtensa: fix stack dump output
  xtensa: make __pa work with uncached KSEG addresses

misc msm fixes.

* 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Make sure to detach the MMU during GPU cleanup
  drm/msm/hdmi: redefinitions of macros not required
  drm/msm/mdp5: Update SSPP_MAX value
  drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
  drm/msm: Don't allow zero sized buffer objects
  drm/msm: Fix wrong pointer check in a5xx_destroy
  drm/msm: adreno: fix build error without debugfs

This patch is to move sctp_transport_dst_check into sctp_packet_config
from sctp_packet_transmit and add pathmtu check in sctp_packet_config.

With this fix, sctp can update dst or pathmtu before appending chunks,
which can void dropping packets in sctp_packet_transmit when dst is
obsolete or dst's mtu is changed.

This patch is also to improve some other codes in sctp_packet_config.
It updates packet max_size with gso_max_size, checks for dst and
pathmtu, and appends ecne chunk only when packet is empty and asoc
is not NULL.

It makes sctp flush work better, as we only need to set up them once
for one flush schedule. It's also safe, since asoc is NULL only when
the packet is created by sctp_ootb_pkt_new in which it just gets the
new dst, no need to do more things for it other than set packet with
transport's pathmtu.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>