Instead of splitting probe code into separate USB and input setup, flatten it.
This allows for easier inspection of order of set up steps, since the probe code
is reasonably small.

Move input-related initialization (phys) from USB block to input block.

Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There is no need to store data buffer size, pointer to the buffer, or endpoint
address in pxrc structure, as they are either only needed during setup, or are
available from elsewhere.

Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There is no need to have the device table first in the file.

Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

URB is the only resource that is not managed, and thus is destroyed too early,
before we unregister input device and stop URB in pxrc_close(). To fix it let's
install custom devm handler to free the URB at the right time in devm unwind
sequence.

Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The USB device is only needed during setup, so put it back after
initialization and do not store it in our private struct.

Also, the USB device is a parent of USB interface so our driver
model rules ensure that USB device should not disappear while
interface device is still there; there is no need to take reference
to the USB device.

Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

gpio_keys.h uses 'bool' - type which is defined in linux/types.h.
Include this header.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

iforce_get_id_packet() invokes wait_event_interruptible_timeout() which
means it has to be in non-atomic context at that point, thus we can use
GFP_KERNEL instead of GFP_ATOMIC.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds the device tree binding documentation for common
keyboard.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Variable num_cols is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable ‘num_cols’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Keep the documentation link up-to-date in case anybody need to dive into it
again, and update email address while at it.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The only user of this driver in mainline does not make use of the module
parameters, so let's remove them. All properties for this driver should be
set through DT or pdata.

Use touchscreen_parse_properties() to automatically set some of the common
touchscreen properties and derive the axis inversion through that.

And finally, use touchscreen_report_pos() to handle the DT properties
automatically instead of doing the inversion ourselves.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Provide a match table so that the driver can be used in devicetree setups.
More properties are added in a later patch.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Describe the bindings for EETI touchscreen controllers.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add Rohm BU21029 resistive touch panel controller support with I2C
interface.

Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Bring in xen-kbdfront changes.

Call pm_wakeup_event on every interrupt. This should help us in identifying
if keyboard was a potential wake reason for the last resume.

Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Remove the unnecessary check before calling pm_wakeup_event. If the
device is not wake enabled, this call is no-op anyway.

Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The license text is specifying "GPLv2" but the MODULE_LICENSE is set to
GPL which means GNU Public License v2 or later. When MODULE_LICENSE and
boiler plate does not match, go for boiler plate license.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It is now only possible to control if multi-touch virtual device
is created or not (via the corresponding XenStore entries),
but keyboard and pointer devices are always created.
In some cases this is not desirable. For example, if virtual
keyboard device is exposed to Android then the latter won't
automatically show on-screen keyboard as it expects that a
physical keyboard device can be used for typing.

Utilize keyboard and pointer device XenStore feature fields to
configure which virtual devices are created:
 - set "feature-disable-keyboard" to 1 if no keyboard device
   needs to be created
 - set "feature-disable-pointer" to 1 if no pointer device
   needs to be created
Keep old behavior by default.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Suggested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Tested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

kbdif protocol describes multi-touch device parameters as a
part of frontend's XenBus configuration nodes while they
belong to backend's configuration. Fix this by reading the
parameters as defined by the protocol.

Fixes: 49aac820

 ("Input: xen-kbdfront - add multi-touch support")

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is the sync up with the canonical definitions of the input,
sound and display protocols in Xen.

Changes to kbdif:
1. Add missing string constants for {feature|request}-raw-pointer
   to align with the rest of the interface file.

2. Add new XenStore feature fields, so it is possible to individually
   control set of exposed virtual devices for each guest OS:
     - set feature-disable-keyboard to 1 if no keyboard device needs
       to be created
     - set feature-disable-pointer to 1 if no pointer device needs
       to be created

3. Move multi-touch device parameters to backend nodes: these are
    described as a part of frontend's XenBus configuration nodes
    while they belong to backend's configuration. Fix this by moving
    the parameters to the proper section.

Unique-id field:
1. Add unique-id XenBus entry for virtual input and display.

2. Change type of unique-id field to string for sndif to align with
display and input protocols.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We allow changing tool type (from MT_TOOL_FINGER to MT_TOOL_PALM) so we
should not be forcing new tracking ID for the slot.

Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let's make input_report_slot_state() return boolean representing whether
the contact is active or not. This will allow writing code like:

	if (input_mt_report_slot_state(input, obj->mt_tool,
					obj->type != RMI_2D_OBJECT_NONE) {

		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x);
		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y);
		...
	}

instead of:

	input_mt_report_slot_state(input, obj->mt_tool,
				   obj->type != RMI_2D_OBJECT_NONE);
	if (obj->type != RMI_2D_OBJECT_NONE) {
		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x);
		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y);
		...
	}

Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redaht.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The documentation for the touchscreen-swapped-x-y property states that
swapping is done after inverting if both are used. RMI4 did it the other
way around, leading to inconsistent behavior with regard to other
touchscreens.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The error return code PTR_ERR(data->irqdomain) is always 0 since
data->irqdomain is equal to NULL in this error handling case.

Fixes: 24d28e4f

 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the RMI driver to use the standard mechanism for
distributing IRQs to the various functions.

Tested on:
* S7300 (F11, F34, F54)
* S7817 (F12, F34, F54)

Signed-off-by: Nick Dyer <nick@shmanahar.org>
Acked-by: Christopher Heiny <cheiny@synaptics.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Address issues pointed by checkpatch.pl

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds the Spreadtrum vibrator driver, which embedded in the
Spreadtrum SC27xx series PMICs.

Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp



Tested on a unit from the first production run sent to Indiegogo backers

Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp



Tested on a unit from the first production run sent to Indiegogo backers

Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull vfs fixes from Al Viro.

 - fix io_destroy()/aio_complete() race

 - the vfs_open() change to get rid of open_check_o_direct() boilerplate
   was nice, but buggy. Al has a patch avoiding a revert, but that's
   definitely not a last-day fodder, so for now revert it is...

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Revert "fs: fold open_check_o_direct into do_dentry_open"
  fix io_destroy()/aio_complete() race

This reverts commit cab64df1

.

Having vfs_open() in some cases drop the reference to
struct file combined with

	error = vfs_open(path, f, cred);
	if (error) {
		put_filp(f);
		return ERR_PTR(error);
	}
	return f;

is flat-out wrong.  It used to be

		error = vfs_open(path, f, cred);
		if (!error) {
			/* from now on we need fput() to dispose of f */
			error = open_check_o_direct(f);
			if (error) {
				fput(f);
				f = ERR_PTR(error);
			}
		} else {
			put_filp(f);
			f = ERR_PTR(error);
		}

and sure, having that open_check_o_direct() boilerplate gotten rid of is
nice, but not that way...

Worse, another call chain (via finish_open()) is FUBAR now wrt
FILE_OPENED handling - in that case we get error returned, with file
already hit by fput() *AND* FILE_OPENED not set.  Guess what happens in
path_openat(), when it hits

	if (!(opened & FILE_OPENED)) {
		BUG_ON(!error);
		put_filp(file);
	}

The root cause of all that crap is that the callers of do_dentry_open()
have no way to tell which way did it fail; while that could be fixed up
(by passing something like int *opened to do_dentry_open() and have it
marked if we'd called ->open()), it's probably much too late in the
cycle to do so right now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull scheduler fixes from Thomas Gleixner:

 - two patches addressing the problem that the scheduler allows under
   certain conditions user space tasks to be scheduled on CPUs which are
   not yet fully booted which causes a few subtle and hard to debug
   issue

 - add a missing runqueue clock update in the deadline scheduler which
   triggers a warning under certain circumstances

 - fix a silly typo in the scheduler header file

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/headers: Fix typo
  sched/deadline: Fix missing clock update
  sched/core: Require cpu_active() in select_task_rq(), for user tasks
  sched/core: Fix rules for running on online && !active CPUs