Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

We already have the DEFINE_SHOW_ATTRIBUTE, There is no need to define
such a macro, so remove DBGFS_FUNC_DECL.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Modify documentation to add multi channel testing support.

Signed-off-by: Seraj Alijan <seraj.alijan@sondrel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Existing transfer size "len" is either generated randomly or set to the
size of test_buf_size. In some cases we need to explicitly specify a
transfer size that is different from the buffer size and non aligned to
test the target device's ability to handle unaligned transfers.

This patch adds optional parameter "transfer_size" to allow setting
explicit transfer size for dma transfers.

Signed-off-by: Seraj Alijan <seraj.alijan@sondrel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Add parameter "alignment" to allow setting the address alignment
manually. Having the ability to configure address alignment from
user space adds new testing capabilities where different alignments can
be configured for testing without having to modify the dma device
alignment properties.

If configured, the alignment value will override the device alignment
property of the target device.

Signed-off-by: Seraj Alijan <seraj.alijan@sondrel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Use fixed point division to calculate iops to prevent reporting 0 iops
when operations last for longer than a second.

Signed-off-by: Seraj Alijan <seraj.alijan@sondrel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Add support for running tests on multiple channels simultaneously as the
driver currently limits to 1 channel per test run. This will add support
for stress testing DMA controllers with multi channel capabilities.

This is done by adding a callback function to the "channel" parameter
that registers the requested channel prior to the "run" parameter being
set to 1. Each time the "channel" parameter is populated with a new
dma channel, a new test is appended to the thread queue. Once the "run"
parameter is set to 1, the test will kick start all pending threads.

Signed-off-by: Seraj Alijan <seraj.alijan@sondrel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

All device_prep_dma_* functions and device_issue_pending can be called
from an interrupt context. As this includes hard IRQs, we must use
spin_lock_irqsave() instead of spin_lock_bh() to access chan->lock.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

We recently moved the test size tests around but it means we need to
adjust the error handling as well or we leak the "pq_coefs" memory.  I
updated the label name to reflect that we're freeing coefs.

Fixes: 787d3083

 ("dmaengine: dmatest: move size checks earlier in function")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Commit 627469e4 ("dmaengine: coh901318: Fix a double-lock bug") left
flags variable unused, so remove it to fix the warning.

drivers/dma/coh901318.c: In function 'coh901318_config':
drivers/dma/coh901318.c:1805:16: warning: unused variable 'flags' [-Wunused-variable]
  unsigned long flags;
                ^~~~~

Fixes: 627469e4

 ("dmaengine: coh901318: Fix a double-lock bug")
Reported-By: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed

Signed-off-by: Vinod Koul <vkoul@kernel.org>

dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed

ENBLn bit should be set before any dma request triggered, please
refer to the below information from i.mx6sololite RM. Otherwise,
spi/uart test will be fail because there is dma request from tx
fifo always before dmaengine_prep_slave_sg() in where ENBLn set
and violate the below rule.

https://www.nxp.com/docs/en/reference-manual/IMX6SLRM.pdf

:

40.8.28 Channel Enable RAM (SDMAARM_CHNENBLn)
"It is thus essential for the Arm platform to program them before
any DMA request is triggered to the SDMA, otherwise an unpredictable
combination of channels may be started".

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
[vkoul: sqashed patch from Robin into direction change]
Signed-off-by: Vinod Koul <vkoul@kernel.org>

This patch adds a new device-tree property that allows to
specify the dma protection control bits for the all of the
DMA controller's channel uniformly.

Setting the "correct" bits can have a huge impact on the
PPC460EX and APM82181 that use this DMA engine in combination
with a DesignWare' SATA-II core (sata_dwc_460ex driver).

In the OpenWrt Forum, the user takimata reported that:
|It seems your patch unleashed the full power of the SATA port.
|Where I was previously hitting a really hard limit at around
|82 MB/s for reading and 27 MB/s for writing, I am now getting this:
|
|root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real    0m 13.65s
|user    0m 0.01s
|sys     0m 11.89s
|
|root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real    0m 8.41s
|user    0m 0.01s
|sys     0m 4.70s
|
|This means: 121 MB/s reading and 75 MB/s writing!
|
|The drive is a WD Green WD10EARX taken from an older MBL Single.
|I repeated the test a few times with even larger files to rule out
|any caching, I'm still seeing the same great performance. OpenWrt is
|now completely on par with the original MBL firmware's performance.

Another user And.short reported:
|I can report that your fix worked! Boots up fine with two
|drives even with more partitions, and no more reboot on
|concurrent disk access!

A closer look into the sata_dwc_460ex code revealed that
the driver did initally set the correct protection control
bits. However, this feature was lost when the sata_dwc_460ex
driver was converted to the generic DMA driver framework.

BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55
BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50
Fixes: 8b344485

 ("sata_dwc_460ex: move to generic DMA driver")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

This patch for the DesignWare AHB Central
Direct Memory Access Controller adds the dma
protection control property:
	"snps,dma-protection-control"

as well as the properties specific values defines into
a new include file: include/dt-bindings/dma/dw-dmac.h

Note: The protection control signals are one-to-one
mapped to the AHB HPROT[1:3] signals for this controller.
The HPROT0 (Data Access) is always hardwired to 1.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The function coh901318_alloc_chan_resources() calls spin_lock_irqsave()
before calling coh901318_config().
But coh901318_config() calls spin_lock_irqsave() again in its
definition, which may cause a double-lock bug.

Because coh901318_config() is only called by
coh901318_alloc_chan_resources(), the bug fix is to remove the
calls to spin-lock and -unlock functions in coh901318_config().

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

There's no need to allocate all that memory if these sizes are invalid
anyway.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The `dmaengine_terminate_all()` is marked as deprecated, so update the test
with `dmaengine_terminate_sync()` which is the recommended alternative.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

After the DMA transfer is done, we don't need to call the un-mapping code
in 3 places. One is enough.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Make the call to dma_alloc_coherent() to fit into a single line, which
helps readability.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

MediaTek Command-Queue DMA controller (CQDMA) on MT6765 SoC is dedicated
to memory-to-memory transfer through queue based descriptor management.

There are only 3 physical channels inside CQDMA, while the driver is
extended to support 32 virtual channels for multiple dma users to issue
dma requests onto the CQDMA simultaneously.

Signed-off-by: Shun-Chih Yu <shun-chih.yu@mediatek.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

As we now have no users of sa11x0_dma_filter_fn() in the tree, we can
unexport this function, and remove the now unused header file.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The license text is specifying GPL v2 or later but the MODULE_LICENSE
is set to GPL v2 which means GNU Public License v2 only. So choose the
license text as the correct one.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Florian Kauer <florian.kauer@koalo.de>
Acked-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed

Signed-off-by: Vinod Koul <vkoul@kernel.org>

Pull UBIFS updates from Richard Weinberger:

 - Full filesystem authentication feature, UBIFS is now able to have the
   whole filesystem structure authenticated plus user data encrypted and
   authenticated.

 - Minor cleanups

* tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits)
  ubifs: Remove unneeded semicolon
  Documentation: ubifs: Add authentication whitepaper
  ubifs: Enable authentication support
  ubifs: Do not update inode size in-place in authenticated mode
  ubifs: Add hashes and HMACs to default filesystem
  ubifs: authentication: Authenticate super block node
  ubifs: Create hash for default LPT
  ubfis: authentication: Authenticate master node
  ubifs: authentication: Authenticate LPT
  ubifs: Authenticate replayed journal
  ubifs: Add auth nodes to garbage collector journal head
  ubifs: Add authentication nodes to journal
  ubifs: authentication: Add hashes to index nodes
  ubifs: Add hashes to the tree node cache
  ubifs: Create functions to embed a HMAC in a node
  ubifs: Add helper functions for authentication support
  ubifs: Add separate functions to init/crc a node
  ubifs: Format changes for authentication support
  ubifs: Store read superblock node
  ubifs: Drop write_node
  ...

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Bugfix:
   - Fix build issues on architectures that don't provide 64-bit cmpxchg

  Cleanups:
   - Fix a spelling mistake"

* tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: fix spelling mistake, EACCESS -> EACCES
  SUNRPC: Use atomic(64)_t for seq_send(64)