When the underlying device is a 4 KiB logical block size device with a
protection interval exponent of 0, i.e. 4096 bytes data + 8 bytes PI, the
driver miscalculates the pi_bytes{out,in} by a factor of 8x (64 bytes).

This leads to errors on all reads and writes on 4 KiB logical block size
devices when CONFIG_BLK_DEV_INTEGRITY is enabled and the
VIRTIO_SCSI_F_T10_PI feature bit has been negotiated.

Fixes: e6dc783a

 ("virtio-scsi: Enable DIF/DIX modes in SCSI host LLD")
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This allows bio_integrity_bytes() to be called from drivers instead of
open coding it.

Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove some macros not used anywhere.

Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe updates from Christoph:

"Highlights:

 - massively improved tracepoints (Keith Busch)
 - support for larger inline data in the RDMA host and target
   (Steve Wise)
 - RDMA setup/teardown path fixes and refactor (Sagi Grimberg)
 - Command Supported and Effects log support for the NVMe target
   (Chaitanya Kulkarni)
 - buffered I/O support for the NVMe target (Chaitanya Kulkarni)

 plus the usual set of cleanups and small enhancements."

* 'nvme-4.19' of git://git.infradead.org/nvme:
  nvmet: don't use uuid_le type
  nvmet: check fileio lba range access boundaries
  nvmet: fix file discard return status
  nvme-rdma: centralize admin/io queue teardown sequence
  nvme-rdma: centralize controller setup sequence
  nvme-rdma: unquiesce queues when deleting the controller
  nvme-rdma: mark expected switch fall-through
  nvme: add disk name to trace events
  nvme: add controller name to trace events
  nvme: use hw qid in trace events
  nvme: cache struct nvme_ctrl reference to struct nvme_request
  nvmet-rdma: add an error flow for post_recv failures
  nvmet-rdma: add unlikely check in the fast path
  nvmet-rdma: support max(16KB, PAGE_SIZE) inline data
  nvme-rdma: support up to 4 segments of inline data
  nvmet: add buffered I/O support for file backed ns
  nvmet: add commands supported and effects log page
  nvme: move init of keep_alive work item to controller initialization
  nvme.h: resync with nvme-cli

Set max_discard_segments to USHRT_MAX in blk_set_stacking_limits() so
that blk_stack_limits() can stack up this limit for stacked devices.

before:

$ cat /sys/block/nvme0n1/queue/max_discard_segments
256
$ cat /sys/block/dm-0/queue/max_discard_segments
1

after:

$ cat /sys/block/nvme0n1/queue/max_discard_segments
256
$ cat /sys/block/dm-0/queue/max_discard_segments
256

Fixes: 1e739730

 ("block: optionally merge discontiguous discard bios into a single request")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Now only used by the bounce code, so move it there and mark the function
static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The function name mentioned doesn't exist, and the code next to it
doesn't match the description either.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Unused now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The mirroring code never changes the bio data or biovecs.  This means
we can reuse the biovec allocation easily instead of duplicating it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by Boaz Harrosh <ooo@electrozaur.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We immediately overwrite the biovec array, so instead just allocate
a new bio and copy over the disk, setor and size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

So don't bother handling it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio_check_pages_dirty currently inviolates the invariant that bv_page of
a bio_vec inside bi_vcnt shouldn't be zero, and that is going to become
really annoying with multpath biovecs.  Fortunately there isn't any
all that good reason for it - once we decide to defer freeing the bio
to a workqueue holding onto a few additional pages isn't really an
issue anymore.  So just check if there is a clean page that needs
dirtying in the first path, and do a second pass to free them if there
was none, while the cache is still hot.

Also use the chance to micro-optimize bio_dirty_fn a bit by not saving
irq state - we know we are called from a workqueue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit ca4b2a01 ("null_blk: add zone support") breaks several
blktests scripts because it renamed the null_blk kernel module into
null_blk_mod. Hence rename null_blk_mod back into null_blk.

Fixes: ca4b2a01

 ("null_blk: add zone support")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Matias Bjorling <matias.bjorling@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Don't use sizeof(uuid_le) where none of the parameters is type of uuid_le.
Since both arguments are u8 [16], use size of destination there.

Moreover, uuid_le is a deprecated type, and nvmet is using uuid_t
already.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Fail out-of-bounds with a proper status code.

Fixes: d5eff33e

 ("nvmet: add simple file backed ns support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If nvmet_copy_from_sgl failed, we falsly return successful
completion status.

Fixes: d5eff33e

 ("nvmet: add simple file backed ns support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We follow the same queue teardown sequence in delete, reset and error
recovery. Centralize the logic.  This patch does not change any
functionality.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Centralize controller sequence to a single routine that correctly cleans
up after failures instead of having multiple apperances in several flows
(create, reset, reconnect).

One thing that we also gain here are the sanity/boundary checks also
when connecting back to a dynamic controller.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If the controller is going away, we need to unquiesce the IO queues so
that all pending request can fail gracefully before moving forward with
controller deletion. Do that before we destroy the IO queues so
blk_cleanup_queue won't block in freeze.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This will print the disk name to the nvme event trace for io requests so
a user can better distinguish traffic to different disks. This can be used
to  create disk based filters. For example, to see only nvme0n2 traffic:

  echo "disk == \"nvme0n2\"" > /sys/kernel/debug/tracing/events/nvme/filter

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
[hch: turned __assign_disk_name into an inline function]
Signed-off-by: Christoph Hellwig <hch@lst.de>

This appends the controller instance to the nvme trace buffer to
distinguish which controller is dispatching and completing a command.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We can not match a command to its completion based on the command
id alone. We need the submitting queue identifier to pair with the
completion, so this patch adds that to the trace buffer.

This patch is also collapsing the admin and IO submission traces into a
single one so we don't need to duplicate this and creating unnecessary
code branches: we know if the command is an admin vs IO based on the qid.

And since we're here, the patch fixes code formatting in the area.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
[hch: move the qid helper to nvme.h and made it an inline function]
Signed-off-by: Christoph Hellwig <hch@lst.de>

We will need to reference the controller in the setup and completion
time for tracing and future traffic based keep alive support.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Posting receive buffer operation can fail, thus we should make
sure to have an error flow during initialization phase. While
we're here, add a debug print in case of a failure.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

ib_post_send operation should succeed unless something unusual
happened to the ib device.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The patch enables inline data sizes using up to 4 recv sges, and capping
the size at 16KB or at least 1 page size.  So on a 4K page system, up to
16KB is supported, and for a 64K page system 1 page of 64KB is supported.

We avoid > 0 order page allocations for the inline buffers by using
multiple recv sges, one for each page.  If the device cannot support
the configured inline data size due to lack of enough recv sges, then
log a warning and reduce the inline size.

Add a new configfs port attribute, called param_inline_data_size,
to allow configuring the size of inline data for a given nvmf port.
The maximum size allowed is still enforced by nvmet-rdma with
NVMET_RDMA_MAX_INLINE_DATA_SIZE, which is now max(16KB, PAGE_SIZE).
And the default size, if not specified via configfs, is still PAGE_SIZE.
This preserves the existing behavior, but allows larger inline sizes
for small page systems.  If the configured inline data size exceeds
NVMET_RDMA_MAX_INLINE_DATA_SIZE, a warning is logged and the size is
reduced.  If param_inline_data_size is set to 0, then inline data is
disabled for that nvmf port.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Allow up to 4 segments of inline data for NVMF WRITE operations. This
reduces latency for small WRITEs by removing the need for the target to
issue a READ WR for IB, or a REG_MR + READ WR chain for iWarp.

Also cap the inline segments used based on the limitations of the
device.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a new "buffered_io" attribute, which disabled direct I/O and thus
enables page cache based caching when enabled.   The attribute can only
be changed when the namespace is disabled as the file has to be reopend
for the change to take effect.

The possibly blocking read/write are deferred to a newly introduced
global workqueue.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch adds support for Commands Supported and Effects log page
(Log Identifier 05h) for NVMeOF. This also makes it easier to find
which commands are supported, e.g. :-

subnqn    : testnqn1
Admin Command Set
ACS2     [Get Log Page                    ] 00000001
ACS6     [Identify                        ] 00000001
ACS8     [Abort                           ] 00000001
ACS9     [Set Features                    ] 00000001
ACS10    [Get Features                    ] 00000001
ACS12    [Asynchronous Event Request      ] 00000001
ACS24    [Keep Alive                      ] 00000001

NVM Command Set
IOCS0    [Flush                           ] 00000001
IOCS1    [Write                           ] 00000001
IOCS2    [Read                            ] 00000001
IOCS8    [Write Zeroes                    ] 00000001
IOCS9    [Dataset Management              ] 00000001

This partticular functionality can be used from the host side to examine
the NVMeOF ctrl commands supported.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Currently, the code initializes the keep alive work item whenever
nvme_start_keep_alive() is called. However, this routine is called
several times while reconnecting, etc. Although it's hoped that keep
alive is always disabled and not scheduled when start is called,
re-initing if it were scheduled or completing can have very bad
side effects. There's no need for re-initialization.

Move the keep_alive work item and cmd struct initialization to
controller init.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Added some feature ids present in nvme-cli but not kernel.

Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Inside blk_mq_try_issue_list_directly(), if the request is issued as
failed, we shouldn't try to do it again, otherwise the warning in
blk_mq_start_request() will be triggered. This change is aligned to
behaviour of other ways of request issue & dispatch.

Fixes: 6ce3dd6e

 ("blk-mq: issue directly if hw queue isn't busy in case of 'none'")
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: LKP <lkp@01.org>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

With the change to use UINT_MAX I broke the depth check as any value of
inflight (ie 0) would be less than (int)UINT_MAX.  Fix this by changing
everything to unsigned int to match the depth.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add tracking of REQ_OP_DISCARD ios to the per-cgroup io.stat.  Two
fields, dbytes and dios, to respectively count the total bytes and
number of discards are added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Cc: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add tracking of REQ_OP_DISCARD ios to the partition statistics and
append them to the various stat files in /sys as well as
/proc/diskstats.  These are tracked with the same four stats as reads
and writes:

Number of discard ios completed.
Number of discard ios merged
Number of discard sectors completed
Milliseconds spent on discard requests

This is done via adding a new STAT_DISCARD define to genhd.h and then
using it to index that stat field for discard requests.

tj: Refreshed on top of v4.17 and other previous updates.

Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add and use a new op_stat_group() function for indexing partition stat
fields rather than indexing them by rq_data_dir() or bio_data_dir().
This function works similarly to op_is_sync() in that it takes the
request::cmd_flags or bio::bi_opf flags and determines which stats
should et updated.

In addition, the second parameter to generic_start_io_acct() and
generic_end_io_acct() is now a REQ_OP rather than simply a read or
write bit and it uses op_stat_group() on the parameter to determine
the stat group.

Note that the partition in_flight counts are not part of the per-cpu
statistics and as such are not indexed via this function.  It's now
indexed by op_is_write().

tj: Refreshed on top of v4.17.  Updated to pass around REQ_OP.

Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Matias Bjorling <mb@lightnvm.io>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Alasdair Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add defines for STAT_READ and STAT_WRITE for indexing the partition
stat entries. This clarifies some fs/ code which has hardcoded 1 for
STAT_WRITE and will make it easier to extend the stats with additional
fields.

tj: Refreshed on top of v4.17.

Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a part_stat_read_accum macro to genhd.h to read and sum across
field entries.  For example to sum up the number read and write
sectors completed.  In addition to being ar reasonable cleanup by
itself this will make it easier to add new stat fields in the future.

tj: Refreshed on top of v4.17.

Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

c11f0c0b

 ("block/mm: make bdev_ops->rw_page() take a bool for
read/write") replaced @op with boolean @is_write, which limited the
amount of information going into ->rw_page() and more importantly
page_endio(), which removed the need to expose block internals to mm.

Unfortunately, we want to track discards separately and @is_write
isn't enough information.  This patch updates bdev_ops->rw_page() to
take REQ_OP instead but leaves page_endio() to take bool @is_write.
This allows the block part of operations to have enough information
while not leaking it to mm.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>