Added support for the generic platform to specify the set of coldboot
hart in DT. If not specified in DT, all harts are allowed to coldboot
as before.

The functions related to sbi_hartmask are not available before coldboot,
so I used bitmap, and added a new bitmap_test() function to test whether
a certain bit of the bitmap is set.

Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

_runtime_offset is a variable not used elsewhere, so remove it.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lwu exists under the current rv64 and should also exist under the rv128
in the future, so I modified the conditions of conditional compilation
so that it can adapt to the future situation

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

With a bare-metal linkers (e.g. riscv64-elf-ld), there exists no
dynsym section. The dynsym section is not used by OpenSBI but
discarding it makes linkers with dynamic library support unhappy.

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>

While writing to the dynsym is futile, the --exclude-libs options is not
recognized by all linkers (e.g. riscv64-elf-ld.bfd).

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>

Support for that option will be added in LLVM 18:
https://github.com/llvm/llvm-project/commit/23ce5368409c760f3dd49d0f17f34772b0b869d8



Clang 17.0.6, however, will error when passed the
`-mstrict-align` flag.
We should only use the flag if it is supported.

Signed-off-by: Kalle Wachsmuth <kalle.wachsmuth@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>

When calling '_reset_regs', it'll reset all registers except some
specific registers (ra, a0, a1, and a2).

Both boot HART and non-boot HARTs will execute the '_start_warm'
function. Therefore, when '_reset_regs' is called in '_start_warm', it
will reset all registers except some specific registers (ra, a0, a1 and
a2) for both boot HART and non-boot HARTs.

Signed-off-by: Zhang Runmin <fmrt19zrmin@163.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

The trigger allocation function uses bit shift instead of mask to check the
mapped status of the triggers. This causes index 0 to be return always. As a
result, the older triggers are overwritten.

Use the mask for MAPPED field in state word to check if the trigger is mapped.

Fixes: 97f234f1

 ("lib: sbi: Introduce the SBI debug triggers extension support")
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Print the total number of triggers found on the boot hart.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

This patch adds functions to register ecalls for debug triggers
and handler to handle the debug trigger function IDs.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

This patch adds defines for SBI debug trigger extension and
function IDs to access the extension.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

RISC-V Debug specification includes Sdtrig ISA extension
which describes Trigger Module. Triggers can cause
a breakpoint exception or trace action without execution
of a special instruction. They can be used to implement
hardware breakpoints and watchpoints for native debugging.

The SBI Debut Trigger extension (Draft v6) can be found at:
https://lists.riscv.org/g/tech-debug/topic/99825362#1302



This patch is an initial implementation of SBI Debug
Trigger Extension (Draft v6) in OpenSBI.

The following features are supported:
 * mcontrol, mcontrol6 triggers
 * Breakpoint and trace actions

NOTE: Chained triggers are not supported

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Detect if debug triggers, sdtrig extension, is supported
by the CPU. The support is detected by access traps and
ISA string parsing.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

This patch introduces Mcontrol and M6 control register
encodings along with macros to manipulate them.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Add the missing TINFO debug trigger CSR.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Introduce cpu_to_lle and lle_to_cpu macros which invoke
correct word length cpu_to_le<64/32> conversion based on
__riscv_xlen.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

This patch updates OpenSBI version to 1.4 as part of
release preparation.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

OpenSBI uses time CSR if Zicntr extension present which causes
it to crash on an older QEMU because QEMU generates Zicntr in
the ISA string for unleashed machine which only has CYCLE and
INSTRET counters.

Fixes: 776770d2

 ("lib: sbi: Using one array to define the
name of extensions")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

The parser will fail if the timer is clint timer and has regname
property. As the regname is only meaningful for aclint, it is more
robust to only check regname for aclint timer.

Fixes: 6112d584

 ("lib: utils/fdt: Allow to use reg-names when parsing ACLINT")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

There is a problem with judging whether the current hart belongs to
hmask. If cur_hartid minus hbase is greater than BITS_PER_LONG, the
previous hmask will also have a bit cleared incorrectly, which will
cause some harts to lose ipi.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

On platforms with Smepmp, the previous booting stage must enter
OpenSBI with mseccfg.MML == 0. This allows OpenSBI to configure
it's own M-mode only regions without depending on the previous
booting stage.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

The SBI_ETRAP error code was introduced only for doing trap
redirection in generic sbi_ecall_handler(). Now the trap
redirection is moved into sbi_ecall_legacy.c and SBI_ETRAP
error code is only used in this source file so let us remove
it.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

Some of the upcoming SBI extensions (such as SSE) will directly
update register state so improve the prototype of ecall handler
to accommodate this. Further, this flexibility allows us to
push the trap redirection from sbi_ecall_handler() to the
sbi_ecall_legacy_handler().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

On platforms with Smepmp, the MMIO regions accessed by M-mode need
to be explicitly marked with M-mode only read/write or shared (both
(M-mode and S-mode) read/write permission.

If the above is not done then runtime PLIC access from M-mode on
platforms with Smepmp will result in access fault when further
results in CPU hotplug not working.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

Let's use SBI_TLB_INFO_SIZE instead of hard-coded 0x40 in
fw_platform_calculate_heap_size() to fine tune the heap size
required for per-hart TLB fifos.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

Let us reduce the size of struct sbi_tlb_info by doing the
following:
1) Change the data type of asid and vmid fields to uint16_t
2) Replace local_fn() function pointer with an enum

Based on the above, the size of struct sbi_tlb_info is reduced
by 16 bytes on RV64 and 4 bytes on RV32.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

Enable access to some extensions through menvcfg and show them in "Boot
HART ISA Extensions" if they are present in the device tree.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Define an array sbi_hart_ext to map extension ID and name , and use it
for ISA parsing and printing out the supported extensions.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Use 1 variable to store the value of menvcfg.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

We can enhance the code by creating 2 unified interface with macro  for
privilege mode and extensions detection, which relies on supported
privilege modes and CSRs.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

The original code has multiple conversions between hartid and
hartindex. Can call sbi_hartmask_set_hartindex directly to
avoid conversion.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

sbi_ipi_event_create() disallows registering an IPI event with a NULL
.process callback, so the function pointer will never be NULL here.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>

An IPI sent to the local hart can be processed directly instead of
triggering the IPI device. This is more efficient, and it avoids a
deadlock when the .sync callback is defined. Since interrupts are
disabled while handling an ecall, the IPI would not get delivered
until the next mret, but sbi_ipi_sync() is called before then.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>

Currently, failures in sbi_ipi_send() are silently ignored, which makes
them difficult to debug. Instead, abort sending the IPI and pass back
the error, but still synchronize any IPIs already sent.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

The tlb_update() callback is called for each destination hart.
Move the size check earlier, so it is executed only once.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Currently, the fdt_parse_aclint_node() follows a fixed order to parse
ACLINT timer. This may cause the undesirable result when the ACLINT
device does not support mtime without adding an empty entry for it in
the DT.

To be robust, make fdt_parse_aclint_node() support "reg-names" property,
so it can parse the DT in an order independent way. For compatibility,
fdt_parse_aclint_node() only use "reg-names" when parsing ACLINT timer,
and will fallback to the old way if "reg-names" property is not found.

Link: https://lore.kernel.org/all/20231114-skedaddle-precinct-66c8897227bb@squawk/


Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup patel <anup@brainfault.org>

When warmboot via HSM, coolboot has been completed and
wait_for_coldboot can be skipped to speed up.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Previous patch introduced a change that using hart count as the default
number of tlb entries in the fifo. This makes the default tlb fifo size
grow in square with the number of harts. So the default heap size is
not enough to allocate tlb fifo when the hart count is big.

Fixes: 52fd64b8

 ("platform: Uses hart count as the default size of tlb info")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Current interruptible hart mask doesn't include the hart which HSM state
is SBI_HSM_STATE_RESUME_PENDING. So when there is a request to send an
IPI to the hart which is in the resume process, this hart would miss the
IPI forever. Put the SBI_HSM_STATE_RESUME_PENDING hart in the
interruptible hart mask to fix the issue.

Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

These sections are only intended to hold data, and should not be executable.

Signed-off-by: Matt Waltz <matthewwaltzis@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>