* configure.in: Treat libtermcap.a detection as a special case when
hosting on cygwin.
* configure: Regenerate.

        static globals for dealing with binary transmissions.
        (remote_write_bytes): Add support for binary downloads
        by shadowing the "M" packet with a new "X" packet. This
        defaults to ON; if the stub does not understand this, it
        will fall back to using "M".
        (putpkt): Add support for binary downloading.
        * monitor.c (monitor_expect): The mon2000 monitor
        on the MSA2000 will also emit random DC1/DC3 chars.
        * m32r-stub.c: Change all char's to unsigned char's
        to support binary downloading.
        (handle_exception): Add support for binary downloading
        via a new "X" packet.
        (getpacket): Do NOT strip eighth bit of incoming chars.
        Watch out for escaped characters in the incoming stream.
        (putpacket): Do NOT strip eighth bit of incoming chars.
        (bin2mem): New function to write binary data directly to
        memory.
        * m32r-rom.c: Add new "mon2000" target.

	* Makefile.in (EXTRA_GCC_FLAGS):  Set AR to $AR instead of
	$AR_FOR_TARGET.  Likewise for RANLIB.

	previously specified, don't check other targets when checking for
	an archive file.

        * configure.in (arm-*-oabi):  Handle.
        (thumb-*-oabi):  Handle.

        (elf32_arm_reloc_type_lookup):  Removed
        * elfarm-nabi.c (elf32_arm_reloc_map):  New.
        (elf32_arm_reloc_type_lookup):  New.
        * elfarm-oabi.c (elf32_arm_reloc_map):  New.
        (elf32_arm_reloc_type_lookup):  New.

        targets.  Change tests to check for absence of symbols instead
        of address zero.

	* hp-psymtab-read.c (hpread_build_psymtabs): Coerce first arg
	passed to make_cleanup to the correct type.
	(hpread_quick_traverse): Change fifth arg to call to
	hpread_end_psymtab to be 0.
	Compare CURR_MODULE_END to 0 rather than NULL.
	Get rid of ifdef'ed out code.
	(scan_procs): Get rid of ifdef'ed out code.

	* somread.c (som_symfile_read): Coerce first argument passed to
	make_cleanup to the correct type.

	* hp-psymtab-read.c (do_pxdb): New function. Check whether the
	file needs to be processed by pxdb (an HP debug info massaging
	tool), if so call it.
	(hpread_build_psymtabs): Initialize scan_start to 0 and
	simplify flow of control.

	* somread.c (som_symfile_read): Add call to do_pxdb (),
	in hp-psymtab-read.c.

	* symfile.c (symbol_file_add): Remove ifdef'ed out HPUX specific
	code.
	(symfile_bfd_open): Remove HPUXHPPA ifdef'ed code. Code is now
	in hp-psymtab-read.c.

	* gdbtk-cmds.c (get_register): For RAW display, concat all the
	pieces together before calling fputs.

	* printcmd.c (print_scalar_formatted): Use strcat to concat all
	the output together before calling fprintf_filtered().

	* lib/gdb.exp (gdb_preprocess): Remove 'puts' statement.

	* gdb.c++/method.exp: Add missing close brace.

        * elfarm-oabi.c:  Renamed from elf32-arm-oldabi.c
        * Makefile.am:  Use new files.
        * Makefile.in:  Regenerate.
        * configure.in:  Use new files.
        * configure:  Regenerate.

        * i386-dis.c (x_mode):  Define.
        (dis386):  Remove.
        (dis386_att):  New.
        (dis386_intel):  New.
        (dis386_twobyte):  Remove.
        (dis386_twobyte_att):  New.
        (dis386_twobyte_intel):  New.
        (print_insn_x86):  Use new arrays.
        (float_mem):  Remove.
        (float_mem_intel):  New.
        (float_mem_att):  New.
        (dofloat):  Use new float_mem arrays.
        (print_insn_i386_att):  New.
        (print_insn_i386_intel):  New.
        (print_insn_i386):  Handle bfd_mach_i386_i386_intel_syntax.
        (putop):  Handle intel syntax.
        (OP_indirE):  Handle intel syntax.
        (OP_E):  Handle intel syntax.
        (OP_I):  Handle intel syntax.
        (OP_sI):  Handle intel syntax.
        (OP_OFF):  Handle intel syntax.

        (INTEL_DWORD_MNEM_SUFFIX):  Define.
        (BYTE_PTR):  Define.
        (WORD_PTR):  Define.
        (DWORD_PTR):  Define.
        (XWORD_PTR):  Define.
        (SHORT):  Define.
        (OFFSET_FLAT):  Define.
        (FLAT):  Define.
        (NONE_FOUND):  Define.
        (No_dSuf):  Define.
        (No_xSuf):  Define.
        * config/tc-i386.c  (set_intel_syntax):  New routine.
        (intel_syntax):  Declare.
        (allow_naked_reg):  Declare.
        (md_pseudo_table):  Support .intel_syntax and .att_syntax.
        (intel_float_operand):  New routine.
        (md_assemble):  Handle INTEL_DWORD_MNEM_SUFFIX.
        Handle brackets as well as parens.  Call i386_intel_operand for
        intel syntax.  Reverse operands if appropriate.  Handle new
        suffixes.  Handle movzx and movsx.
        (i386_is_reg):  New routine.
        (i386_immediate):  New routine.
        (i386_scale):  New routine.
        (i386_displacement):  New routine.
        (i386_operand_modifier):  New routine.
        (build_displacement_string):  New routine.
        (i386_parse_seg):  New routine.
        (i386_intel_memory_operand):  New routine.
        (i386_intel_operand):  New routine.
        (i386_operand):  Call i386_displacement, i386_immediate,
        i386_scale, etc.  instead of handling inline.
        (parse_register):  Handle registers without prefix.

add elf32-arm-oldabi., elf32-arm-newabi.c, elf32-arm.h

        * configure.in: Require autoconf 2.13.
        (AM_EXEEXT): Replace with new AC_EXEEXT.
        * acinclude.m4: Move itcl header macros from aclocal.m4 to here.
        * aclocal.m4: Regenerated.
        * configure: Regenerated.

at run-time.  At the moment, the only thing this affects is the
set of registers visible.
* config/rs6000/tm-rs6000.h (REGISTER_NAME): Define this as a call
to the function rs6000_register_name.
(rs6000_register_name): Include extern decl.
(NUM_REGS): Bump to 183.  What's the right way to do this?
(FIRST_UISA_SP_REGNUM, LAST_UISA_SP_REGNUM): Renamed from
FIRST_SP_REGNUM, LAST_SP_REGNUM.
(REGISTER_BYTES): Recompute this.
* rs6000-tdep.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
#include "gdbcmd.h", so we can define commands here.
(struct variant): New structure.
(COMMON_UISA_REG_NAMES, PPC_UISA_SPR_NAMES, PPC_SEGMENT_REG_NAMES,
PPC_32_OEA_SPR_NAMES, num_registers): New macros.
(register_names_rs6000, register_names_uisa, register_names_403,
register_names_403GC, register_names_505, register_names_860,
register_names_601, register_names_602, register_names_603,
register_names_604, register_names_750, variants): New variables.
(rs6000_register_name, install_variant, find_variant_by_name,
install_variant_by_name, list_variants, show_current_variant,
set_processor, show_processor): New functions.
(_initialize_rs6000_tdep): Define new commands `set processor' and
`show processor', and call install_variant_by_name to set the
default variant.
* rs6000-nat.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
* configure.in: Accept the `--with-cpu' flag, to specify a default
processor variant.
* acconfig.h: Provide a blurb for TARGET_CPU_DEFAULT, which is set
by configure's `--with-cpu' flag.
* config.in, configure: Regenerated.

        * configure.in (arm-*-oabi):  New.
        (thumb-*-oabi):  New.
        * config/tc-arm.c (target_oabi):  Declare.
        (md_apply_fix3): Support REL relocs.
        (md_parse_option):  Handle -oabi.
        (elf32_arm_target_format):  New routine.
        (md_longopts):  Add OPTION_OABI.
        * config/tc-arm.h:  Redefine TARGET_FORMAT.

        and bfd_elf32_bigarm_oabi_vec.

        (elf32-arm-newabi.lo):  New.
        * Makefile.in:  Regenerate.
        * config.bfd (thumb-*-elf):  Remove definition of targ_underscore.
        (arm-*-elf):  Likewise.
        (arm-*-oabi):  New.
        (thumb-*-oabi):  New.
        * configure:  Regenerate.
        * configure.in (bfd_elf32_littlearm_oabi_vec):  New.
        (bfd_elf32_bigarm_oabi_vec):  New.
        * elf32-arm-newabi.c:  New.
        * elf32-arm-oldabi.c:  New.
        * elf32-arm.c:  Removed.
        * elf32-arm.h:  New.

	* srcwin.test (srcwin-4.3): Fix bp test.

	* gdbtk-cmds.c: (gdb_set_bp): Change the "type" argument
	to be ASCII instead of an integer. Currently accepts "temp"
	or "normal".  Fixed error messages.
	(gdb_set_bp_addr): Ditto.