In commit:

  commit faeb9f13
  Date:   Wed Feb 24 12:50:00 2021 +0000

      gdb/fortran: add support for ASSOCIATED builtin

A test was added that fails to process the trailing gdb prompt inside
a gdb_test_multiple call, this will cause a failure if the tests are
run with READ1=1, or randomly at other times depending on how the
expect buffers are read in.

Fixed by adding a -wrap argument.

gdb/testsuite/ChangeLog:

	* gdb.fortran/associated.exp: Add missing '-wrap' argument.

An extra \n in calls to fprintf_unfiltered() caused invalid MI records
to be emitted:

   > gdb -i mi3 -ex "target remote :7000"
   =thread-group-added,id="i1"
   ~"GNU gdb (GDB) 11.0.50.20201019-git\n"
   ~"Copyright (C) 2020 Free Software Foundation, Inc.\n"
   ...
   ~"Remote debugging using :7001\n"
   =tsv-created,name="trace_timestamp",initial="0"\n
   =thread-group-started,id="i1",pid="304973"

This commit fixes the problem.

gdb/ChangeLog:

        * gdb/mi/mi-interp.c (mi_traceframe_changed): Remove trailing \n from output.
        (mi_tsv_created): Likewise.
        (mi_tsv_deleted): Likewise.

When running test-case gdb.dwarf2/fission-mix.exp using gcc-11 (and using the
tentative fix for PR27353 to get past that assertion failure), I run into:
...
(gdb) file fission-mix^M
Reading symbols from fission-mix...^M
Dwarf Error: wrong unit_type in compilation unit header \
  (is DW_UT_split_compile (0x05), should be DW_UT_type (0x02)) \
  [in module fission-mix2.dwo]^M
(No debugging symbols found in fission-mix)^M
...

The compilation unit that is complained about is:
...
Contents of the .debug_info.dwo section (loaded from fission-mix2.dwo):

  Compilation Unit @ offset 0x0:
   Length:        0x57 (32-bit)
   Version:       5
   Unit Type:     DW_UT_split_compile (5)
   Abbrev Offset: 0x0
   Pointer Size:  8
   DWO ID:        0x3e3930d3cc1805df
 <0><14>: Abbrev Number: 1 (DW_TAG_compile_unit)
...

And the dwarf error is triggered here in read_comp_unit_head:
...
        case DW_UT_split_compile:
          if (section_kind != rcuh_kind::COMPILE)
            error (_("Dwarf Error: wrong unit_type in compilation unit header "
                   "(is %s, should be %s) [in module %s]"),
                   dwarf_unit_type_name (cu_header->unit_type),
                   dwarf_unit_type_name (DW_UT_type), filename);
          break;
...
due to passing rcuh_kind::TYPE here in open_and_init_dwo_file:
...
      create_debug_type_hash_table (per_objfile, dwo_file.get (),
                                    &dwo_file->sections.info, dwo_file->tus,
                                    rcuh_kind::TYPE);
...

Fix this by changing the section_kind argument to create_debug_type_hash_table
to rcuh_kind::COMPILE, to reflect that we're passing &dwo_file->sections.info
rather than &dwo_file->sections.types.

Tested on x86_64-linux.

gdb/ChangeLog:

2021-02-25  Tom de Vries  <tdevries@suse.de>

	PR symtab/27354
	* dwarf2/read.c (open_and_init_dwo_file): Use rcuh_kind::COMPILE as
	section_kind for &dwo_file->sections.info.

Prior to 89753bbf ("Warn when a script redefines a symbol") there
was no diagnostic at all. As of that commit, it's a warning, not an
error.

When attempting to call a Fortran function for which there is no debug
information we currently trigger undefined behaviour in GDB by
accessing non-existent type fields.

The reason is that in order to prepare the arguments, for a call to a
Fortran function, we need to know the type of each argument.  If the
function being called has no debug information then obviously GDB
doesn't know about the argument types and we should either give the
user an error or pick a suitable default.  What we currently do is
just assume the field exist and access undefined memory, which is
clearly wrong.

The reason GDB needs to know the argument type is to tell if the
argument is artificial or not, artificial arguments will be passed by
value while non-artificial arguments will be passed by reference.

An ideal solution for this problem would be to allow the user to cast
the function to the correct type, we already do this to some degree
with the return value, for example:

  (gdb) print some_func_ ()
  'some_func_' has unknown return type; cast the call to its declared return type
  (gdb) print (integer) some_func_ ()
  $1 = 1

But if we could extend this to allow casting to the full function
type, GDB could figure out from the signature what are real
parameters, and what are artificial parameters.  Maybe something like
this:

  (gdb) print ((integer () (integer, double)) some_other_func_ (1, 2.3)

Alas, right now the Fortran expression parser doesn't seem to support
parsing function signatures, and we certainly don't have support for
figuring out real vs artificial arguments from a signature.

Still, I think we can prevent GDB from accessing undefined memory and
provide a reasonable default behaviour.

In this commit I:

  - Only ask if the argument is artificial if the type of the argument
  is actually known.

  - Unknown arguments are assumed to be artificial and passed by
  value (non-artificial arguments are pass by reference).

  - If an artificial argument is prefixed with '&' by the user then we
  treat the argument as pass-by-reference.

With these three changes we avoid undefined behaviour in GDB, and
allow the user, in most cases, to get a reasonably natural default
behaviour.

gdb/ChangeLog:

	PR fortran/26155
	* f-lang.c (fortran_argument_convert): Delete declaration.
	(fortran_prepare_argument): New function.
	(evaluate_subexp_f): Move logic to new function
	fortran_prepare_argument.

gdb/testsuite/ChangeLog:

	PR fortran/26155
	* gdb.fortran/call-no-debug-func.f90: New file.
	* gdb.fortran/call-no-debug-prog.f90: New file.
	* gdb.fortran/call-no-debug.exp: New file.

This commit adds support for the ASSOCIATED builtin to the Fortran
expression evaluator.  The ASSOCIATED builtin takes one or two
arguments.

When passed a single pointer argument GDB returns a boolean indicating
if the pointer is associated with anything.

When passed two arguments the second argument should either be some a
pointer could point at or a second pointer.

If the second argument is a pointer target, then the result from
associated indicates if the pointer is pointing at this target.

If the second argument is another pointer, then the result from
associated indicates if the two pointers are pointing at the same
thing.

gdb/ChangeLog:

	* f-exp.y (f77_keywords): Add 'associated'.
	* f-lang.c (fortran_associated): New function.
	(evaluate_subexp_f): Handle FORTRAN_ASSOCIATED.
	(operator_length_f): Likewise.
	(print_unop_or_binop_subexp_f): New function.
	(print_subexp_f): Make use of print_unop_or_binop_subexp_f for
	FORTRAN_ASSOCIATED, FORTRAN_LBOUND, and FORTRAN_UBOUND.
	(dump_subexp_body_f): Handle FORTRAN_ASSOCIATED.
	(operator_check_f): Likewise.
	* std-operator.def: Add FORTRAN_ASSOCIATED.

gdb/testsuite/ChangeLog:

	* gdb.fortran/associated.exp: New file.
	* gdb.fortran/associated.f90: New file.

gfortran supports .xor. as an alias for .neqv., see:

  https://gcc.gnu.org/onlinedocs/gfortran/_002eXOR_002e-operator.html

this commit adds support for this operator to GDB.

gdb/ChangeLog:

	* f-exp.y (fortran_operators): Add ".xor.".

gdb/testsuite/ChangeLog:

	* gdb.fortran/dot-ops.exp (dot_operations): Test ".xor.".

This makes IR objects use the same logic as normal objects with
respect to what sort of ref/def makes an as-needed library needed.
Testing the binding of the definition is just plain wrong.  What
matters is the binding of the reference.

	PR 27441
	* elf-bfd.h (struct elf_link_hash_entry): Add ref_ir_nonweak.
	* elflink.c (elf_link_add_object_symbols): Set ref_ir_nonweak and
	use when deciding an as-needed library should be loaded instead
	of using the binding of the library definition.

	PR 27456
	* rename.c (simple_copy): Mark target_stat ATTRIBUTE_UNUSED.

With test-case gdb.cp/temargs.exp on target board \
unix/gdb:debug_flags=-gdwarf-5 I run into:
...
(gdb) info addr I^M
ERROR: GDB process no longer exists
GDB process exited with wait status 32286 exp19 0 0 CHILDKILLED SIGABRT SIGABRT
UNRESOLVED: gdb.cp/temargs.exp: test address of I in templ_m
...

This is a regression since commit 529908cb "Remove DW_UNSND".

The problem is that this DW_AT_decl_file:
...
 <1><221>: Abbrev Number: 4 (DW_TAG_structure_type)
    <222>   DW_AT_name        : Base<double, 23, (& a_global), &S::f>
    <226>   DW_AT_byte_size   : 1
    <226>   DW_AT_decl_file   : 1
    <226>   DW_AT_decl_line   : 30
    <227>   DW_AT_sibling     : <0x299>
...
is not read by this code in new_symbol:
....
      attr = dwarf2_attr (die,
                          inlined_func ? DW_AT_call_file : DW_AT_decl_file,
                          cu);
      if (attr != nullptr && attr->form_is_unsigned ())
...
because DW_AT_decl_file has form DW_FORM_implicit_const:
...
   4      DW_TAG_structure_type    [has children]
    DW_AT_name         DW_FORM_strp
    DW_AT_byte_size    DW_FORM_implicit_const: 1
    DW_AT_decl_file    DW_FORM_implicit_const: 1
    DW_AT_decl_line    DW_FORM_data1
    DW_AT_sibling      DW_FORM_ref4
    DW_AT value: 0     DW_FORM value: 0
...
which is a signed LEB128, so attr->form_is_unsigned () returns false.

Fix this by introducing new functions is_nonnegative and as_nonnegative, and
use these instead of form_is_unsigned and as_unsigned.

Tested on x86_64-linux.

gdb/ChangeLog:

2021-02-24  Tom de Vries  <tdevries@suse.de>

	PR symtab/27336
	* dwarf2/attribute.c (attribute::form_is_signed): New function
	factored out of ...
	* dwarf2/attribute.h (attribute::as_signed): ... here.
	(attribute::is_nonnegative, attribute::as_nonnegative): New function.
	(attribute::form_is_signed): Declare.
	* dwarf2/read.c (new_symbol): Use is_nonnegative and as_nonnegative
	for DW_AT_decl_file.

gdb/ChangeLog:

	* nat/aarch64-linux-hw-point.c: Add comment regarding include
	order for <sys/ptrace.h> and <asm/ptrace.h>.

Due to a recent glibc header file change, the file
nat/aarch64-linux-hw-point.c no longer builds on Fedora rawhide.

An enum for PTRACE_SYSEMU is now provided by <sys/ptrace.h>.  In the
past, PTRACE_SYSEMU was defined only in <asm/ptrace.h>.  This is
what it looks like...

In <asm/ptrace.h>:

 #define PTRACE_SYSEMU		  31

In <sys/ptrace.h>:

enum __ptrace_request
{
  ...
  PTRACE_SYSEMU = 31,
 #define PT_SYSEMU PTRACE_SYSEMU

  ...
}

When <asm/ptrace.h> and <sys/ptrace.h> are both included in a source
file, we run into the following build problem when the former is
included before the latter:

In file included from nat/aarch64-linux-hw-point.c:26:
/usr/include/sys/ptrace.h:86:3: error: expected identifier before numeric constant
   86 |   PTRACE_SYSEMU = 31,
      |   ^~~~~~~~~~~~~

(There are more errors after this one too.)

The file builds without error when <asm/ptrace.h> is included after
<sys/ptrace.h>.  I found that this is already done in
nat/aarch64-sve-linux-ptrace.h (which is included by
nat/aarch64-linux-ptrace.c).

I've tested this change on Fedora rawhide and Fedora 33, both
running on an aarch64 machine.

gdb/ChangeLog:

	* nat/aarch64-linux-hw-point.c: Include <asm/ptrace.h> after
	<sys/ptrace.h>.

The 'section' command uses a fixed size buffer into which a section
name is copied.  This commit replaces this with a use of std::string
so we can now display very long section names.

The expected results of one test need to be updated.

gdb/ChangeLog:

	* exec.c (set_section_command): Move variable declarations into
	the function body, and use std::string instead of a fixed size
	buffer.

gdb/testsuite/ChangeLog:

	* gdb.base/sect-cmd.exp: Update expected results.

The only target that implements target_ops::get_section_table in a
meaningful way is exec_target.  This target calls back into the
program space to return the current global section_table.

The global section table is populated whenever the user provides GDB
with an executable, or when a symbol file is loaded, e.g. when a
dynamic library is loaded, or when the user does add-symbol-file.

I recently ran into a situation where a user, debugging a remote
target, was not supplying GDB with a main executable at all.  Instead
the user attached to the target then did add-symbol-file, and then
proceeded to debug the target.

This works fine, but it was noticed that even when
trust-readonly-sections was on GDB was still accessing the target to
get the contents of readonly sections.

The problem is that by not providing an executable there was no
exec_target in the target stack, and so when GDB calls the
target_ops::get_section_table function GDB ends up in
dummy_target::get_section_table, which just returns NULL.

What I want is that even when GDB doesn't have an exec_target in the
target stack, a call to target_ops::get_section_table will still
return the section_table from the current program space.

When considering how to achieve this my first though was, why is the
request for the section table going via the target stack at all?  The
set of sections loaded is a property of the program space, not the
target.  This is, after all, why the data is being stored in the
program space.

So I initially tried changing target_get_section_table so that,
instead of calling into the target it just returns
current_program_space->target_sections ().

This would be fine except for one issue, target_bfd (from
bfd-target.c).  This code is used from solib-svr4.c to create a
temporary target_ops structure that implements two functions
target_bfd::xfer_partial and target_bfd::get_section_table.

The purpose behind the code is to enable two targets, ppc64 and frv to
decode function descriptors from the dynamic linker, based on the
non-relocated addresses from within the dynamic linker bfd object.

Both of the implemented functions in target_bfd rely on the target_bfd
object holding a section table, and the ppc64 target requires that the
target_bfd implement ::get_section_table.

The frv target doesn't require ::get_section_table, instead it
requires the ::xfer_partial.  We could in theory change the ppc64
target to use the same approach as frv, however, this would be a bad
idea.  I believe that the frv target approach is broken.  I'll
explain:

The frv target calls get_target_memory_unsigned to read the function
descriptor.  The address being read is the non-relocated address read
from the dynamic linker in solib-srv4.c:enable_break.  Calling
get_target_memory_unsigned eventually ends up in target_xfer_partial
with an object type of TARGET_OBJECT_RAW_MEMORY.  This will then call
memory_xfer_check_region.  I believe that it is quite possible that a
the non-relocated addresses pulled from the dynamic linker could be in
a memory region that is not readable, while the relocated addresses
are in a readable memory region.  If this was ever the case for the
frv target then GDB would reject the attempt to read the non-relocated
function pointer.

In contrast the ppc64 target calls target_section_by_addr, which calls
target_get_section_table, which then calls the ::get_section_table
function on the target.

Thus, when reflecting on target_bfd we see two functions,
::xfer_partial and ::get_section_table.  The former is required by the
frv target, but that target is (I think) potentially broken.  While
the latter is required by the ppc64 target, but this forces
::get_section_table to exist as a target_ops member function.

So my original plan, have target_get_section_table NOT call a
target_ops member function appears to be flawed.

My next idea was to remove exec_target::get_section_table, and instead
move the implementation into dummy_target::get_section_table.
Currently the dummy_target implementation always returns NULL
indicating no section table, but plenty of other dummy_target member
functions do more than just return null values.

So now, dummy_target::get_section_table returns the section table from
the current program space.  This allows target_bfd to remain
unchanged, so ppc64 and frv should not be affected.

Making this change removes the requirement for the user to provide an
executable, GDB can now always access the section_table, as the
dummy_target always exists in the target stack.

Finally, there's a test that the target_section table is not empty in
the case where the user does add-symbol-file without providing an
executable.

gdb/ChangeLog:

	* exec.c (exec_target::get_section_table): Delete member function.
	(section_table_read_available_memory): Use current_top_target, not
	just the exec_ops target.
	* target-delegates.c: Regenerate.
	* target.c (default_get_section_table): New function.
	* target.h (target_ops::get_section_table): Change default
	behaviour to call default_get_section_table.
	(default_get_section_table): Declare.

Following on from earlier commits which made access to the
target_sections table more 'const', this commit makes the table
private within the program_space class and provides member functions
to access the table.

Ideally I would have liked for the new target_sections member
function (on program_space) to return a 'const' reference to the table
within the program_space.  Unfortunately, there are two places in
solib-*.c, where code outside of the program_space class modifies the
target_sections table, and so to support this we need to return a
non-const reference.

There should be no user visible changes after this commit.

gdb/ChangeLog:

	* exec.c (exec_target::close): Call new clear_target_sections
	function.
	(program_space::add_target_sections): Update name of member
	variable.
	(program_space::foreach_target_section): New function.
	(program_space::add_target_sections): Update name of member
	variable.
	(program_space::remove_target_sections): Likewise.
	(exec_one_fork): Use new target_sections member function.
	(exec_target::get_section_table): Likewise.
	(exec_target::files_info): Likewise.
	(set_section_command): Use new foreach_target_section member
	function.
	(exec_set_section_address): Likewise.
	(exec_target::has_memory): Use new target_sections member
	function.
	* progspace.h (program_space::clear_target_sections): New member
	function.
	(program_space::target_sections): Rename member variable to
	m_target_sections, replace with a new member function.
	(program_space::foreach_target_section): Declare new member
	function.
	(program_space::m_target_sections): New member variable.
	* solib-dsbt.c (scan_dyntag): Use new member function.
	* solib-svr4.c (scan_dyntag): Likewise.

During review of the next patch (which changes the 'section' command),
a bug was pointed out.  I wondered why no tests spotted this bug and I
found that the 'section' command test (sect-cmd.exp) is only run on
hppa targets!

In this commit I have given this test script a bit of a spring clean,
bringing it up to date with current testsuite style.  I have made some
of the patterns a little more robust, but in general my intention was
not to change the underlying meaning of any of these tests.

gdb/testsuite/ChangeLog:

	* gdb.base/sect-cmd.exp: Rewrite using modern testsuite
	techniques.  Enable the test for all targets.

The code to access the target section table can be made more const, so
lets do that.  There should be no user visible changes after this
commit.

gdb/ChangeLog:

	* gdb/bfd-target.c (class target_bfd) <get_section_table>: Make
	return type const.
	* gdb/exec.c (struct exec_target) <get_section_table>: Likewise.
	(section_table_read_available_memory): Make local const.
	(exec_target::xfer_partial): Make local const.
	(print_section_info): Make parameter const.
	* gdb/exec.h (print_section_info): Likewise.
	* gdb/ppc64-tdep.c (ppc64_convert_from_func_ptr_addr): Make local
	const.
	* gdb/record-btrace.c (record_btrace_target::xfer_partial):
	Likewise.
	* gdb/remote.c (remote_target::remote_xfer_live_readonly_partial):
	Likewise.
	* gdb/s390-tdep.c (s390_load): Likewise.
	* gdb/solib-dsbt.c (scan_dyntag): Likewise.
	* gdb/solib-svr4.c (scan_dyntag): Likewise.
	* gdb/target-debug.h (target_debug_print_target_section_table_p):
	Rename to...
	(target_debug_print_const_target_section_table_p): ...this.
	* gdb/target-delegates.c: Regenerate.
	* gdb/target.c (target_get_section_table): Make return type const.
	(target_section_by_addr): Likewise.  Also make some locals const.
	(memory_xfer_partial_1): Make some locals const.
	* gdb/target.h (struct target_ops) <get_section_table>: Make
	return type const.
	(target_section_by_addr): Likewise.
	(target_get_section_table): Likewise.

We already have a command 'maint info sections', this command prints
all sections from all known object files.

However, GDB maintains a second section table internally.  This
section table is used when GDB wants to read directly from an object
file rather than actually reading memory on the target.  As such only
some sections (the allocatable ones) are added to this secondary
section table.

I recently ran into a situation where some of GDB's optimisations for
reading directly from the files were not working.  In 'maint info
sections' I could see that GDB knew about the object file, and did
know about the sections that it _should_ have been reading from.  But
I couldn't ask GDB which sections it had copied into its secondary
section table.

This commit adds a new command 'maint info target-sections' that fills
this gap.  This command lists only those sections that GDB has copied
into its secondary table.

You'll notice that the testsuite includes a comment indicating that
there's a bug in GDB.  Normally this is not something I would add to
the testsuite, instead we should raise an actual bugzilla bug and then
mark an xfail, however, a later patch in this series will remove this
comment once the actual bug in GDB is fixed.

gdb/ChangeLog:

	* NEWS: Mention new 'maint info target-sections' command.
	* maint.c (maintenance_info_target_sections): New function.
	(_initialize_maint_cmds): Register new command.

gdb/doc/ChangeLog:

	* gdb.texinfo (Files): Document new 'maint info target-sections'
	command.

gdb/testsuite/ChangeLog:

	* gdb.base/maint-info-sections.exp: Add new tests.
	(check_maint_info_target_sections_output): New proc.

GDB for RISC-V always uses target descriptions.  When the target
doesn't provide a target description then a default is selected.
Usually this default is selected based on the properties of the
executable being debugged.  However, when there is no executable being
debugged we currently fallback to the riscv:rv64 target description as
the default.  This leads to strange behaviour like this:

  $ gdb
  (gdb) set architecture riscv:rv32
  (gdb) p sizeof ($pc)
  $1 = 8

Despite the users specifically setting the architecture to riscv:rv32
GDB still thinks that the target has riscv:rv64 register sizes.

The above is a bit of a contrived situation.  I actually ran into this
situation while trying to connect to a running riscv:rv32 target
without supplying an executable (the target didn't provide a target
description).  When I tried to set a register on the target I ran into
errors because GDB was passing 8 bytes to the target rather than the
expected 4.  Even when I manually specified the architecture (as
above) I couldn't convince GDB to only send 4 bytes.

This patch fixes this issue.  Now, when we selected a default target
description we will make use of the user selected architecture to
guide our choice.  In the above example we now get:

  $ gdb
  (gdb) set architecture riscv:rv32
  (gdb) p sizeof ($pc)
  $1 = 4

And my real world example of connecting to a remote without an
executable works fine.

I've used the fact that we can ask GDB about $pc even when no
executable is loaded as the basis for a test to cover this situation.

gdb/ChangeLog:

	* riscv-tdep.c (riscv_features_from_gdbarch_info): Rename to...
	(riscv_features_from_bfd): ...this.  Change parameter type to
	'bfd*', and update as required.
	(riscv_find_default_target_description): Update call to
	riscv_features_from_bfd.  Select a default xlen based on
	info.bfd_arch_info.
	(riscv_gdbarch_init): Update call to riscv_features_from_bfd.

gdb/testsuite/ChangeLog:

	* gdb.arch/riscv-default-tdesc.exp: New file.

When evaluating and expression containing UNOP_IND in mode
EVAL_AVOID_SIDE_EFFECTS, GDB currently (mostly) returns the result of
a call to value_zero meaning we get back an object with the correct
type, but its contents are all zero.

If the target type contains fields with dynamic type then in order to
resolve these dynamic fields GDB will need to read the value of the
field from within the parent object.  In this case the field value
will be zero as a result of the call to value_zero mentioned above.

The idea behind EVAL_AVOID_SIDE_EFFECTS is to avoid the chance that
doing something like `ptype` will modify state within the target, for
example consider: ptype i++.

However, there is already precedence within GDB that sometimes, in
order to get accurate type results, we can't avoid reading from the
target, even when EVAL_AVOID_SIDE_EFFECTS is in effect.  For example I
would point to eval.c:evaluate_var_value, the handling of OP_REGISTER,
the handling of value_x_unop in many places.  I believe the Ada
expression evaluator also ignore EVAL_AVOID_SIDE_EFFECTS in some
cases.

I am therefor proposing that, in the case where a pointer points at a
dynamic type, we allow UNOP_IND to perform the actual indirection.
This allows accurate types to be displayed in more cases.

gdb/ChangeLog:

	* eval.c (evaluate_subexp_standard): Call value_ind for points to
	dynamic types in UNOP_IND.

gdb/testsuite/ChangeLog:

	* gdb.fortran/pointer-to-pointer.exp: Additional tests.

	PR 27285
	* od-elf32_avr.c (elf32_avr_get_memory_usage): Check for overflows
	when adding together the section sizes.

	* objcopy.c (merge_gnu_build_notes): Remove support for v1/v2 GNU
	build notes.
	* readelf.c (print_gnu_build_attribute_description): Likewise.

	PR 27459
	* coff-stgo32.c (go32exe_check_format): Sanity check size of
	header to avoid a buffer overflow.

A number of targets, bfin, rl78, rx, can show odd failures when
bfd/reloc.c changes BFD_RELOC_* enum values, if recompiling over a
build dir with existing objects.  The problem is caused by
bfin-parse.o and similar not being recompiled and so using stale
BFD_RELOC_* values.  This isn't fixed by making bfin-parse.c depend on
bfd/reloc.c, which isn't necessary anyway.  bfin-parse.o should have
been recompiled due to bfd/bfd.h changing when extracted bfd/reloc.c
BFD_RELOC_* values change, but that wasn't happening.  The problem is
that automake generates a makefile that loads gas/config/.deps/
dependency file for objects with corresponding sources mentioned in
EXTRA_as_new_SOURCES.  Unless we want to mess around generating
explicit dependencies, I think that mean moving some object files to
the build gas/config/.  This patch does that, removing some hacks for
m68k-parse.c that should no longer be necessary, and removes some
rules that catered to old bison producing code that triggers compiler
warnings.

	PR 23691
	* Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c..
	(TARGET_CPU_HFILES): ..and config/xtensa-relax.h..
	(TARGET_EXTRA_FILES): ..to here.  Add config/bfin-lex-wrapper.c,
	and use alongside TARGET_CPU_CFILES.
	(EXTRA_DIST): Update location of generated .c files.
	(config/m68k-parse.c): New rule replacing m68k-parse.c rule.
	(config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c),
	(config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly.
	(itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed
	dependencies.
	(itbl-parse.@OBJEXT@): Delete rule using NO_WERROR.
	(itbl-parse.c, itbl-parse.h): Tidy.
	* config/bfin-lex-wrapper.c: Include config/bfin-lex.c.
	* config/bfin-lex.l: Include config/bfin-parse.h.
	* configure.ac (extra_objects): Move object files corresponding
	to .y and .l files now in config/ to config/.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

This patch makes use of the temp file descriptor in smart_rename
rather than reopening the file.  I don't believe there is a security
issue in reopening the file, but this way is one less directory
operation.  The patch also attempts to preserve S_ISUID and S_ISGID.

	PR 27456
	* bucomm.h (smart_rename): Update prototype.
	* rename.c (smart_rename): Add fromfd and preserve_dates params.
	Pass fromfd and target_stat to simple_copy.  Call set_times
	when preserve_dates.
	(simple_copy): Accept fromfd rather than from filename.  Add
	target_stat param.  Rewind fromfd rather than opening.  Open
	"to" file without O_CREAT.  Try to preserve S_ISUID and S_ISGID.
	* ar.c (write_archive): Rename ofd to tmpfd.  Dup tmpfd before
	closing output temp file, and pass tmpfd to smart_rename.
	* arsup.c (temp_fd): Rename from real_fd.
	(ar_save): Dup temp_fd and pass to smart_rename.
	* objcopy.c (strip_main, copy_main): Likewise, and pass
	preserve_dates.

	PR 27456
	* rename.c: Tidy throughout.
	(smart_rename): Always copy.  Remove windows specific code.

As described in the log of patch "gdb/dwarf: add assertion in
maybe_queue_comp_unit", it would happen that a call to
maybe_queue_comp_unit would enqueue a CU in the to-expand queue while
nothing up the stack was processing the queue.  This is not desirable,
as items are then left lingering in the queue when we exit the
dwarf2/read code.  This is an inconsistent state.

The normal case of using the queue is when we go through
dw2_do_instantiate_symtab and process_queue.  As depended-on CUs are
found, they get added to the queue.  process_queue expands CUs until the
queue is empty.

To catch these cases where things are enqueued while nothing up the
stack is processing the queue, change dwarf2_per_bfd::queue to be an
optional.  The optional is instantiated in dwarf2_queue_guard, just
before where we call process_queue.  In the dwarf2_queue_guard
destructor, the optional gets reset.  Therefore, the queue object is
instantiated only when something up the stack is handling it.  If
another entry point tries to enqueue a CU for expansion, an assertion
will fail and we know we have something to fix.

dwarf2_queue_guard sounds like the good place for this, as it's
currently responsible for making sure the queue gets cleared if we exit
due to an error.

This also allows asserting that when age_comp_units or remove_all_cus
run, the queue is not instantiated, and gives us one more level of
assurance that we won't free the DIEs of a CU that is in the
CUs-to-expand queue.

gdb/ChangeLog:

	PR gdb/26828
	* dwarf2/read.c (dwarf2_queue_guard) <dwarf2_queue_guard>:
	Instantiate queue.
	(~dwarf2_queue_guard): Clear queue.
	(queue_comp_unit): Assert that queue is
	instantiated.
	(process_queue): Adjust.
	* dwarf2/read.h (struct dwarf2_per_bfd) <queue>: Make optional.

Change-Id: I8fe3d77845bb4ad3d309eac906acebe79d9f0a9d

The previous commit log described how items could be left lingering in
the dwarf2_per_bfd::queue and how that could cause trouble.

This patch fixes the issue by changing maybe_queue_comp_unit so that it
doesn't put a CU in the to-expand queue if that CU is already expanded.
This will make it so that when dwarf2_fetch_die_type_sect_off calls
follow_die_offset and maybe_queue_comp_unit, it won't enqueue the target
CU, because it will see the CU is already expanded.

This assumes that if a CU is dwarf2_fetch_die_type_sect_off's target CU,
it will have previously been expanded.  I think it is the case, but I
can't be 100% sure.  If that's not true, the assertions added in the
following patch will catch it, and it means we'll have to re-think a bit
more how things work (it wouldn't be well handled at all today anyway).

This fixes something else in maybe_queue_comp_unit that looks wrong.
Imagine the DIEs of a CU are loaded in memory, but that CU is not
expanded.  In that case, maybe_queue_comp_unit will use this early
return:

  /* If the compilation unit is already loaded, just mark it as
     used.  */
  dwarf2_cu *cu = per_objfile->get_cu (per_cu);
  if (cu != nullptr)
    {
      cu->last_used = 0;
      return 0;
    }

... so the CU won't be queued for expansion.  Whether the DIEs of a CU
are loaded in memory and whether that CU is expanded are two orthogonal
things, but that function appears to mix them.  So, move the queuing
above that check / early return, so that if the CU's DIEs are loaded in
memory but the CU is not expanded yet, it gets enqueued.

I tried to improve maybe_queue_comp_unit's documentation to clarify what
the return value means.  By clarifying this, I noticed that two callers
(follow_die_offset and follow_die_sig_1) access the CU's DIEs after
calling maybe_queue_comp_unit, only relying on maybe_queue_comp_unit's
return value to tell whether DIEs need to be loaded first or not.  As
explained in the new comment, this is problematic:
maybe_queue_comp_unit's return value doesn't tell whether DIEs are
currently loaded, it means whether maybe_queue_comp_unit requires the
caller to load them.  If the CU is already expanded but the DIEs to have
been freed, maybe_queue_comp_unit returns 0, meaning "I don't need you
to load the DIEs".  So if these two functions (follow_die_offset and
follow_die_sig_1) need to access the DIEs in any case, for their own
usage, they should make sure to load them if they are not loaded
already.  I therefore added an extra check to the condition they use,
making it so they will always load the DIEs if they aren't already.

From what I found, other callers don't care for the CU's DIEs, they call
maybe_queue_comp_unit to ensure the CU gets expanded eventually, but
don't care for it after that.

gdb/ChangeLog:

	PR gdb/26828
	* dwarf2/read.c (maybe_queue_comp_unit): Check if CU is expanded
	to decide whether or not to enqueue it for expansion.
	(follow_die_offset, follow_die_sig_1): Ensure we load the DIEs
	after calling maybe_queue_comp_unit.

Change-Id: Id98c6b60669f4b4b21b9be16d0518fc62bdf686a

Same as the previous patch, but for GDBserver.  The return value of this
method is never used, change it to return void.

gdbserver/ChangeLog:

	* linux-low.cc (linux_process_target::filter_event): Return
	void.
	* linux-low.h (class linux_process_target) <filter_event>:
	Return void.

Change-Id: I79e5dc04d9b21b9f01c6d675fa463d1b1a703b3a

I noticed that linux_nat_filter_event returns a value, but its caller
doesn't use it.  This has been since 9c02b525 ("linux-nat.c: better
starvation avoidance, handle non-stop mode too").  Before that commit,
the return value was used to tell the caller whether to continue
processing that event or not.  But since then, the model is that we pull
all events from the kernel and linux_nat_filter_event just saves the
status to the lwp_info structure if it thinks it's relevant.  And the
caller, linux_nat_wait_1, selects a status at random amongst the threads
with a pending status.  So essentially, the return value of
linux_nat_filter_event does not have a reason to be anymore.  Change it
so it returns void.

gdb/ChangeLog:

	* linux-nat.c (linux_nat_filter_event): Return void.

Change-Id: I35662868910f5122772ed92a512adfbf4da12d87

While looking at Andrew's recent target sections series, I saw that
target_bfd_reopen took a "bfd *", leading to a call to new_reference.
However, because the only caller of target_bfd_reopen is already using
gdb_bfd_ref_ptr, this code can be simplified and the explicit call to
new_reference can be removed.

gdb/ChangeLog
2021-02-22  Tom Tromey  <tromey@adacore.com>

	* solib-svr4.c (enable_break): Update.
	* bfd-target.c (class target_bfd) <target_bfd>: Change parameter
	type.
	(target_bfd_reopen): Change parameter type.
	* bfd-target.h (target_bfd_reopen): Change parameter type.

Unlike the previous patch, I don't propose that we take this patch into
gdb-10-branch.

This patch adds two asserts, prompted by investigating and fixing the
bug fixed by the previous patch.

The assert in find_thread_ptid would have caught the original issue
before the segfault (I think it's slightly more use friendly).

The assert in add_thread_silent would have made it clear that the
solution proposed in [1] isn't the right one.  The solution ended up
passing nullptr as a target to add_thread.  We don't want that, because
add_thread_silent uses it to look up the inferior to which to add the
thread.  If the target is nullptr, we could find an inferior with the
same pid, but belonging to an unrelated target.  So we always want a
non-nullptr target in add_thread_silent.

gdb/ChangeLog:

	* thread.c (add_thread_silent): Add assert.
	(find_thread_ptid): Add assert.

[1] https://sourceware.org/pipermail/gdb-patches/2021-February/176202.html

Change-Id: Ie593ee45c5eb02235e8e9fbcda612d48ce883852

Since this is a GDB 9 -> 10 regression, I would like to push it to
gdb-10-branch.

This is a follow-up to:

  https://sourceware.org/pipermail/gdb-patches/2021-February/176202.html

This patch fixes a segfault seen when attaching to a process on Solaris.
The steps leading to the segfault are:

 - procfs_target::attach calls do_attach, at this point the inferior's
   process slot in the target stack is empty.
 - do_attach adds a thread with `add_thread (&the_procfs_target, ptid)`
 - in add_thread_silent, the passed target (&the_procfs_target) is
   passed to find_inferior_ptid
 - find_inferior_ptid returns nullptr, as there is no inferior with this
   ptid that has &the_procfs_target as its process target
 - the nullptr `inf` is passed to find_thread_ptid, which dereferences
   it, causing a segfault
 - back in procfs_target::attach, after do_attach, we push the
   the_procfs_target on the inferior's target stack, although we never
   reach this because the segfault happens before.

To fix this, I think we need to do the same as is done in
inf_ptrace_target::attach: push the target early and unpush it in case
the attach fails (and keep it if the attach succeeds).

Implement it by moving target_unpush_up to target.h, so it can be
re-used here.  Make procfs_target::attach use it.  Note that just like
is mentioned in inf_ptrace_target::attach, we should push the target
before calling target_pid_to_str, so that calling target_pid_to_str ends
up in procfs_target::pid_to_str.

Tested by trying to attach on a process on gcc211 on the gcc compile
farm.

gdb/ChangeLog:

	PR gdb/27435
	* inf-ptrace.c (struct target_unpusher): Move to target.h.
	(target_unpush_up): Likewise.
	* procfs.c (procfs_target::attach): Push target early.  Use
	target_unpush_up to unpush target in case of error.
	* target.h (struct target_unpusher): Move here.
	(target_unpush_up): Likewise.

Change-Id: I88aff8b20204e1ca1d792e27ac6bc34fc1aa0d52

It's not needed for sizing fixups since 0e2779e9, and wrong to emit
this reloc to the object file.

	* coff-rs6000.c (_bfd_xcoff_reloc_type_lookup): Remove BFD_RELOC_16.
	* coff64-rs6000.c (xcoff64_reloc_type_lookup): Likewise.

This file is quite large and is getting unmanageable.  Split it apart
to follow aclocal best practices by putting one-macro-per-file.  There
shouldn't be any real functional changes here as can be seen in the
configure script regens.

Note that we don't even warn if scripts adjust a symbol as in
ld-elf/var1 and ld-scripts/pr14962.

include/
	* bfdlink.h (struct bfd_link_info): Add warn_multiple_definition.
ld/
	* ldexp.c (exp_fold_tree_1): Warn on script defining a symbol
	defined in an object file.
	* ldmain.c (multiple_definition): Heed info->warn_multiple_definition.
	* testsuite/ld-scripts/defined5.d: Expect a warning.