- Jun 21, 2023
-
-
Ryusuke Konishi authored
commit 2f012f2baca140c488e43d27a374029c1e59098d upstream. A syzbot fault injection test reported that nilfs_btnode_create_block, a helper function that allocates a new node block for b-trees, causes a kernel BUG for disk images where the file system block size is smaller than the page size. This was due to unexpected flags on the newly allocated buffer head, and it turned out to be because the buffer flags were not cleared by nilfs_btnode_abort_change_key() after an error occurred during a b-tree update operation and the buffer was later reused in that state. Fix this issue by using nilfs_btnode_delete() to abandon the unused preallocated buffer in nilfs_btnode_abort_change_key(). Link: https://lkml.kernel.org/r/20230513102428.10223-1-konishi.ryusuke@gmail.com Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by:
<syzbot+b0a35a5c1f7e846d3b09@syzkaller.appspotmail.com> Closes: https://lkml.kernel.org/r/000000000000d1d6c205ebc4d512@google.com Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Janne Grunau authored
commit 85041e12418fd0c08ff972b7729f7971afb361f8 upstream. The given value of 1518 seems to refer to the layer 2 ethernet frame size without 802.1Q tag. Actual use of the "max-frame-size" including in the consumer of the "altr,tse-1.0" compatible is the MTU. Fixes: 95acd4c7 ("nios2: Device tree support") Fixes: 61c610ec ("nios2: Add Max10 device tree") Cc: <stable@vger.kernel.org> Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Luís Henriques authored
commit 26a6ffff7de5dd369cdb12e38ba11db682f1dec0 upstream. When changing a file size with fallocate() the new size isn't being checked. In particular, the FSIZE ulimit isn't being checked, which makes fstest generic/228 fail. Simply adding a call to inode_newsize_ok() fixes this issue. Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.de Signed-off-by:
Luís Henriques <lhenriques@suse.de> Reviewed-by:
Mark Fasheh <mark@fasheh.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Luís Henriques authored
commit 50d927880e0f90d5cb25e897e9d03e5edacc79a8 upstream. It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using fstest generic/452. After a read-only remount, quotas are suspended and ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info(). When unmounting the filesystem, an UAF access to the oinfo will eventually cause a crash. BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0 Read of size 8 at addr ffff8880389a8208 by task umount/669 ... Call Trace: <TASK> ... timer_delete+0x54/0xc0 try_to_grab_pending+0x31/0x230 __cancel_work_timer+0x6c/0x270 ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2] ocfs2_dismount_volume+0xdd/0x450 [ocfs2] generic_shutdown_super+0xaa/0x280 kill_block_super+0x46/0x70 deactivate_locked_super+0x4d/0xb0 cleanup_mnt+0x135/0x1f0 ... </TASK> Allocated by task 632: kasan_save_stack+0x1c/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x8b/0x90 ocfs2_local_read_info+0xe3/0x9a0 [ocfs2] dquot_load_quota_sb+0x34b/0x680 dquot_load_quota_inode+0xfe/0x1a0 ocfs2_enable_quotas+0x190/0x2f0 [ocfs2] ocfs2_fill_super+0x14ef/0x2120 [ocfs2] mount_bdev+0x1be/0x200 legacy_get_tree+0x6c/0xb0 vfs_get_tree+0x3e/0x110 path_mount+0xa90/0xe10 __x64_sys_mount+0x16f/0x1a0 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 650: kasan_save_stack+0x1c/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0xf9/0x150 __kmem_cache_free+0x89/0x180 ocfs2_local_free_info+0x2ba/0x3f0 [ocfs2] dquot_disable+0x35f/0xa70 ocfs2_susp_quotas.isra.0+0x159/0x1a0 [ocfs2] ocfs2_remount+0x150/0x580 [ocfs2] reconfigure_super+0x1a5/0x3a0 path_mount+0xc8a/0xe10 __x64_sys_mount+0x16f/0x1a0 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.de Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit b6ebaa8100090092aa602530d7e8316816d0c98d ] The existing code silently converts read operations with the REQ_FUA bit set into write-barrier operations. This results in data loss as the backend scribbles zeroes over the data instead of returning it. While the REQ_FUA bit doesn't make sense on a read operation, at least one well-known out-of-tree kernel module does set it and since it results in data loss, let's be safe here and only look at REQ_FUA for writes. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Liviu Dudau authored
[ Upstream commit 4897a898a216058dec55e5e5902534e6e224fcdf ] PAGE_OFFSET is technically a virtual address so when checking the value of initrd_start against it we should make sure that it has been sanitised from the values passed by the bootloader. Without this change, even with a bootloader that passes correct addresses for an initrd, we are failing to load it on MT7621 boards, for example. Signed-off-by:
Liviu Dudau <liviu@dudau.co.uk> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Manuel Lauss authored
[ Upstream commit 2d645604f69f3a772d58ead702f9a8e84ab2b342 ] Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code: - skip cache invalidation if chip has working coherency circuitry. - invalidate KSEG0-portion of the (physical) data address. - force the dma channel doorbell write out to bus immediately with a sync. Signed-off-by:
-
Mario Limonciello authored
[ Upstream commit 95339f40a8b652b5b1773def31e63fc53c26378a ] The logic used for power_supply_is_system_supplied() counts all power supplies and assumes that the system is running from AC if there is either a non-battery power-supply reporting to be online or if no power-supplies exist at all. The second rule is for desktop systems, that don't have any battery/charger devices. These systems will incorrectly report to be powered from battery once a device scope power-supply is registered (e.g. a HID device), since these power-supplies increase the counter. Apart from HID devices, recent dGPUs provide UCSI power supplies on a desktop systems. The dGPU by default doesn't have anything plugged in so it's 'offline'. This makes power_supply_is_system_supplied() return 0 with a count of 1 meaning all drivers that use this get a wrong judgement. To fix this case adjust the logic to also examine the scope of the power supply. If the power supply is deemed a device power supply, then don't count it. Cc: Evan Quan <Evan.Quan@amd.com> Suggested-by:
Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Osama Muhammad authored
[ Upstream commit 2bf1c45be3b8f3a3f898d0756c1282f09719debd ] This patch fixes the error checking in core.c in debugfs_create_dir. The correct way to check if an error occurred is 'IS_ERR' inline function. Signed-off-by:
Osama Muhammad <osmtendev@gmail.com> Suggested-by:
Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230515172938.13338-1-osmtendev@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit 155c45a25679f571c2ae57d10db843a9dfc63430 ] Reduce the amount of output this dev_dbg() statement emits into logs, otherwise if system software polls the sysfs entry for data and keeps getting -ENODATA, it could end up filling the logs up. This does in fact make systemd journald choke, since during boot the sysfs power supply entries are polled and if journald starts at the same time, the journal is just being repeatedly filled up, and the system stops on trying to start journald without booting any further. Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 328acc5657c6197753238d7ce0a6924ead829347 ] As all level 2 and level 3 caches are unified, add required cache-unified property to fix warnings like: vexpress-v2p-ca5s.dtb: cache-controller@2c0f0000: 'cache-unified' is a required property Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230423150837.118466-1-krzysztof.kozlowski@linaro.org Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 59dddea9879713423c7b2ade43c423bb71e0d216 ] Use mod_delayed_work() instead of separate cancel_delayed_work_sync() + schedule_delayed_work() calls. Signed-off-by:
-
Hans de Goede authored
[ Upstream commit a5299ce4e96f3e8930e9c051b28d8093ada87b08 ] ab8500_btemp_external_power_changed() dereferences di->btemp_psy, which gets sets in ab8500_btemp_probe() like this: di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where ab8500_btemp_external_power_changed() may get called while di->btemp_psy has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in di->btemp_psy, so ab8500_btemp_external_power_changed() can simply directly use the passed in psy argument which is always valid. And the same applies to ab8500_fg_external_power_changed(). Signed-off-by:Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- Jun 14, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20230612101651.048240731@linuxfoundation.org Tested-by:
Chris Paterson (CIP) <chris.paterson2@renesas.com> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 8809b5e3 which is commit fda2093860df4812d69052a8cf4997e53853a340 upstream. Ben reports that this should not have been backported to the older kernels as the rest of the macro is not empty. It was a clean-up patch in 6.4-rc1 only, it did not add new device ids. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/r/aa0d401a7f63448cd4c2fe4a2d7e8495d9aa123e.camel@decadent.org.uk Signed-off-by:
-
Zixuan Fu authored
commit 85f02d6c upstream. In btrfs_relocate_block_group(), the rc is allocated. Then btrfs_relocate_block_group() calls relocate_block_group() prepare_to_relocate() set_reloc_control() that assigns rc to the variable fs_info->reloc_ctl. When prepare_to_relocate() returns, it calls btrfs_commit_transaction() btrfs_start_dirty_block_groups() btrfs_alloc_path() kmem_cache_zalloc() which may fail for example (or other errors could happen). When the failure occurs, btrfs_relocate_block_group() detects the error and frees rc and doesn't set fs_info->reloc_ctl to NULL. After that, in btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and then used, which may cause a use-after-free bug. This possible bug can be triggered by calling btrfs_ioctl_balance() before calling btrfs_ioctl_defrag(). To fix this possible bug, in prepare_to_relocate(), check if btrfs_commit_transaction() fails. If the failure occurs, unset_reloc_control() is called to set fs_info->reloc_ctl to NULL. The error log in our fault-injection testing is shown as follows: [ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs] ... [ 58.753577] Call Trace: ... [ 58.755800] kasan_report+0x45/0x60 [ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs] [ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs] [ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs] [ 58.758231] start_transaction+0x896/0x2950 [btrfs] [ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs] [ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs] [ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs] ... [ 58.768510] Allocated by task 23683: [ 58.768777] ____kasan_kmalloc+0xb5/0xf0 [ 58.769069] __kmalloc+0x227/0x3d0 [ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs] [ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs] [ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... [ 58.773337] Freed by task 23683: ... [ 58.774815] kfree+0xda/0x2b0 [ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs] [ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs] [ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> CC: stable@vger.kernel.org # 5.15+ Reviewed-by:
Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Zixuan Fu <r33s3n6@gmail.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Stefan Ghinea <stefan.ghinea@windriver.com> Signed-off-by:
-
Josef Bacik authored
commit fb686c68 upstream. There are a few places where we don't check the return value of btrfs_commit_transaction in relocation.c. Thankfully all these places have straightforward error handling, so simply change all of the sites at once. Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Theodore Ts'o authored
commit dea9d8f7643fab07bf89a1155f1f94f37d096a5e upstream. ext4_xattr_block_set() relies on its caller to call dquot_initialize() on the inode. To assure that this has happened there are WARN_ON checks. Unfortunately, this is subject to false positives if there is an antagonist thread which is flipping the file system at high rates between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is enabled. Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit ca0aa17f2db3468fd017038d23a78e17388e2f67 ] If pm runtime resume fails the .remove callback used to exit early. This resulted in an error message by the driver core but the device gets removed anyhow. This lets the registered i2c adapter stay around with an unbound parent device. So only skip clk disabling if resume failed, but do delete the adapter. Fixes: 8b9ec071 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Luiz Augusto von Dentz authored
commit c5d2b6fa26b5b8386a9cc902cdece3a46bef2bd2 upstream. Similar to commit 0f7d9b31 ("netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy()"). We can not access k after kfree_rcu() call. Cc: stable@vger.kernel.org Signed-off-by:
Min Li <lm0963hack@gmail.com> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
-
Xiubo Li authored
commit 409e873ea3c1fd3079909718bbeb06ac1ec7f38b upstream. There is a race between capsnaps flush and removing the inode from 'mdsc->snap_flush_list' list: == Thread A == == Thread B == ceph_queue_cap_snap() -> allocate 'capsnapA' ->ihold('&ci->vfs_inode') ->add 'capsnapA' to 'ci->i_cap_snaps' ->add 'ci' to 'mdsc->snap_flush_list' ... == Thread C == ceph_flush_snaps() ->__ceph_flush_snaps() ->__send_flush_snap() handle_cap_flushsnap_ack() ->iput('&ci->vfs_inode') this also will release 'ci' ... == Thread D == ceph_handle_snap() ->flush_snaps() ->iterate 'mdsc->snap_flush_list' ->get the stale 'ci' ->remove 'ci' from ->ihold(&ci->vfs_inode) this 'mdsc->snap_flush_list' will WARNING To fix this we will increase the inode's i_count ref when adding 'ci' to the 'mdsc->snap_flush_list' list. [ idryomov: need_put int -> bool ] Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299 Signed-off-by:Xiubo Li <xiubli@redhat.com> Reviewed-by:
Milind Changire <mchangir@redhat.com> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Chia-I Wu authored
commit b447b079cf3a9971ea4d31301e673f49612ccc18 upstream. According to Alex, most APUs from that time seem to have the same issue (vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I limit the fixup to CHIP_STONEY Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Torokhov authored
commit 7b63a88bb62ba2ddf5fcd956be85fe46624628b9 upstream. The kernel only allocate 5 MT slots; check that transmitted slot ID falls within the acceptable range. Link: https://lore.kernel.org/r/ZFnEL91nrT789dbG@google.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ismael Ferreras Morezuelas authored
commit feee70f4568650cf44c573488798ffc0a2faeea3 upstream. While doing my research to improve the xpad device names I noticed that the 1532:0037 VID/PID seems to be used by the DeathAdder 2013, so that Razer Sabertooth instance looked wrong and very suspect to me. I didn't see any mention in the official drivers, either. After doing more research, it turns out that the xpad list is used by many other projects (like Steam) as-is [1], this issue was reported [2] and Valve/Sam Lantinga fixed it [3]: [1]: https://github.com/libsdl-org/SDL/blob/dcc5eef0e2395854b254ea2873a4899edab347c6/src/joystick/controller_type.h#L251 [2]: https://steamcommunity.com/app/353380/discussions/0/1743392486228754770/ [3]: https://hg.libsdl.org/SDL/rev/29809f6f0271 (With multiple Internet users reporting similar issues, not linked here) After not being able to find the correct VID/PID combination anywhere on the Internet and not receiving any reply from Razer support I did some additional detective work, it seems like it presents itself as "Razer Sabertooth Gaming Controller (XBOX360)", code 1689:FE00. Leaving us with this: * Razer Sabertooth (1689:fe00) * Razer Sabertooth Elite (24c6:5d04) * Razer DeathAdder 2013 (1532:0037) [note: not a gamepad] So, to sum things up; remove this conflicting/duplicate entry: { 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 }, As the real/correct one is already present there, even if the Internet as a whole insists on presenting it as the Razer Sabertooth Elite, which (by all accounts) is not: { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 }, Actual change in SDL2 referencing this kernel issue: https://github.com/libsdl-org/SDL/commit/e5e54169754ca5d3e86339d968b20126d9da0a15 For more information of the device, take a look here: https://github.com/xboxdrv/xboxdrv/pull/59 You can see a lsusb dump here: https://github.com/xboxdrv/xboxdrv/files/76581/Qa6dBcrv.txt Fixes: f554f619 ("Input: xpad - sync device IDs with xboxdrv") Signed-off-by:
Ismael Ferreras Morezuelas <swyterzone@gmail.com> Reviewed-by:
Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/5c12dbdb-5774-fc68-5c58-ca596383663e@gmail.com Signed-off-by:
-
Vladislav Efanov authored
commit abac3ac97fe8734b620e7322a116450d7f90aa43 upstream. Syzkaller got a lot of crashes like: KASAN: use-after-free Write in *_timers* All of these crashes point to the same memory area: The buggy address belongs to the object at ffff88801f870000 which belongs to the cache kmalloc-8k of size 8192 The buggy address is located 5320 bytes inside of 8192-byte region [ffff88801f870000, ffff88801f872000) This area belongs to : batadv_priv->batadv_priv_dat->delayed_work->timer_list The reason for these issues is the lack of synchronization. Delayed work (batadv_dat_purge) schedules new timer/work while the device is being deleted. As the result new timer/delayed work is set after cancel_delayed_work_sync() was called. So after the device is freed the timer list contains pointer to already freed memory. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Cc: stable@kernel.org Fixes: 2f1dfbe1 ("batman-adv: Distributed ARP Table - implement local storage") Signed-off-by:Vladislav Efanov <VEfanov@ispras.ru> Acked-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Somnath Kotur authored
[ Upstream commit 1a9e4f501bc6ff1b6ecb60df54fbf2b54db43bfe ] We need to call bnxt_hwrm_func_qcfg() on a VF to query the default VLAN that may be setup by the PF. If a default VLAN is enabled, the VF cannot support VLAN acceleration on the receive side and the VNIC must be setup to strip out the default VLAN tag. If a default VLAN is not enabled, the VF can support VLAN acceleration on the receive side. The VNIC should be set up to strip or not strip the VLAN based on the RX VLAN acceleration setting. Without this call to determine the default VLAN before calling bnxt_setup_vnic(), the VNIC may not be set up correctly. For example, bnxt_setup_vnic() may set up to strip the VLAN tag based on stale default VLAN information. If RX VLAN acceleration is not enabled, the VLAN tag will be incorrectly stripped and the RX data path will not work correctly. Fixes: cf6645f8 ("bnxt_en: Add function for VF driver to query default VLAN.") Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 7c5d4801ecf0564c860033d89726b99723c55146 ] irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap. So we need to clear the pointer to our glue structure in rmap before doing that, not after. Fixes: 4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries") Signed-off-by:Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 886bc7d6ed3357975c5f1d3c784da96000d4bbb4 ] rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c, thus should be declared in an include file. This fixes the following sparse warning: net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static? Fixes: e331473f ("net/sched: cls_api: add missing validation of netlink attributes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5c3b74a92aa285a3df722bf6329ba7ccf70346d6 ] Add READ_ONCE()/WRITE_ONCE() on accesses to the sock flow table. This also prevents a (smart ?) compiler to remove the condition in: if (table->ents[index] != newval) table->ents[index] = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652 ("rfs: Receive Flow Steering") Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1e5c647c3f6d4f8497dedcd226204e1880e0ffb3 ] Add READ_ONCE()/WRITE_ONCE() on accesses to sk->sk_rxhash. This also prevents a (smart ?) compiler to remove the condition in: if (sk->sk_rxhash != newval) sk->sk_rxhash = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652 ("rfs: Receive Flow Steering") Signed-off-by:
-
Sungwoo Kim authored
[ Upstream commit 75767213f3d9b97f63694d02260b6a49a2271876 ] When receiving a connect response we should make sure that the DCID is within the valid range and that we don't already have another channel allocated for the same DCID. Missing checks may violate the specification (BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 3, Part A, Page 1046). Fixes: 40624183 ("Bluetooth: L2CAP: Add missing checks for invalid LE DCID") Signed-off-by:
Sungwoo Kim <iam@sung-woo.kim> Signed-off-by:
-
Ying Hsu authored
[ Upstream commit 02c5ea5246a44d6ffde0fddebfc1d56188052976 ] L2CAP assumes that the locks conn->chan_lock and chan->lock are acquired in the order conn->chan_lock, chan->lock to avoid potential deadlock. For example, l2sock_shutdown acquires these locks in the order: mutex_lock(&conn->chan_lock) l2cap_chan_lock(chan) However, l2cap_disconnect_req acquires chan->lock in l2cap_get_chan_by_scid first and then acquires conn->chan_lock before calling l2cap_chan_del. This means that these locks are acquired in unexpected order, which leads to potential deadlock: l2cap_chan_lock(c) mutex_lock(&conn->chan_lock) This patch releases chan->lock before acquiring the conn_chan_lock to avoid the potential deadlock. Fixes: a2a9339e ("Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}") Signed-off-by:
Ying Hsu <yinghsu@chromium.org> Signed-off-by:
-
Stephan Gerhold authored
[ Upstream commit 0c331fd1dccfba657129380ee084b95c1cedfbef ] It is usually better to request all necessary resources (clocks, regulators, ...) before starting to make use of them. That way they do not change state in case one of the resources is not available yet and probe deferral (-EPROBE_DEFER) is necessary. This is particularly important for DMA channels and IOMMUs which are not enforced by fw_devlink yet (unless you use fw_devlink.strict=1). spi-qup does this in the wrong order, the clocks are enabled and disabled again when the DMA channels are not available yet. This causes issues in some cases: On most SoCs one of the SPI QUP clocks is shared with the UART controller. When using earlycon UART is actively used during boot but might not have probed yet, usually for the same reason (waiting for the DMA controller). In this case, the brief enable/disable cycle ends up gating the clock and further UART console output will halt the system completely. Avoid this by requesting the DMA channels before changing the clock state. Fixes: 612762e8 ("spi: qup: Add DMA capabilities") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerhold.net Signed-off-by:
-
Greg Kroah-Hartman authored
Not upstream as it was fixed in a much larger api change in newer kernels. gcc-13 rightfully complains that enum is not the same as an int, so fix up the function prototypes in i40e_alloc.h to be correct, solving a bunch of build warnings. Signed-off-by: -
Greg Kroah-Hartman authored
Not upstream as this function is no longer around anymore. The function i40iw_manage_apbvt() has the wrong prototype match from the .h file to the .c declaration, so fix it up, otherwise gcc-13 complains (rightfully) that the type is incorrect. Signed-off-by:
-
- Jun 09, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20230607200835.310274198@linuxfoundation.org Tested-by:
-
Ping-Ke Shih authored
commit 93fbc1eb upstream. Since IQK could spend time, we make a cache of IQK result matrix that looks like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we have made a cache. To determine a cache is made, we check iqk_matrix[channel_idx].val[0][0]. The initial commit 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that is always true, and this mistake is found by commit ee3db469 ("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so I recall the vendor driver to find fix and apply the correctness. Fixes: 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220801113345.42016-1-pkshih@realtek.com Signed-off-by:
-
Al Viro authored
commit fb4554c2 upstream. Descriptor table is a shared resource; two fget() on the same descriptor may return different struct file references. get_tap_ptr_ring() is called after we'd found (and pinned) the socket we'll be using and it tries to find the private tun/tap data structures associated with it. Redoing the lookup by the same file descriptor we'd used to get the socket is racy - we need to same struct file. Thanks to Jason for spotting a braino in the original variant of patch - I'd missed the use of fd == -1 for disabling backend, and in that case we can end up with sock == NULL and sock != oldsock. Cc: stable@kernel.org Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [4.14: Account for get_tap_skb_array() instead of get_tap_ptr_ring()] Signed-off-by:
Samuel Mendoza-Jonas <samjonas@amazon.com> Signed-off-by:
-
Tudor Ambarus authored
commit 7e01c7f7046efc2c7c192c3619db43292b98e997 upstream. Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d1 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d3 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by:<syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by:
Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by:
-
Alexander Bersenev authored
commit 5d0ab06b upstream. The ndp32->wLength is two bytes long, so replace cpu_to_le32 with cpu_to_le16. Fixes: 0fa81b30 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block") Signed-off-by:
Alexander Bersenev <bay@hackerdom.ru> Signed-off-by:
-
