- Oct 10, 2008
-
-
Matthew Ranostay authored
Add support for S/PDIF IN on reference boards quirks. Also disable the IEC958 capture switch on boards with GPIO0 enabled. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Eran Tromer authored
Add support for the E-Mu "Tracker Pre" USB sound card, following the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB. As with the 0202 and 0404 USB, functionality is very limited: just a couple of sample rates, no volume/mute control, etc. Signed-off-by:
Eran Tromer <eran@tromer.org> Signed-off-by:
-
Wei Ni authored
When read RIRB buffer immediately after RIRB interrupt received, sometimes the data will be "0x0". If we wait for some time, the data in buffer will be correct. This issue only occurred with AMD Phenom cpu. So we set this "needs_damn_long_delay" flag. Signed-off-by:
Wei Ni <wni@nvidia.com> Signed-off-by:
-
Wei Ni authored
Add NVIDIA HDMI HD-audio codec support in snd-hda-intel driver, include NVIDIA MCP78/7A HDMI. Signed-off-by:
-
Takashi Iwai authored
The recent slave_dig_out addition has some rooms to clean up. Also it doesn't call snd_hda_cleanup_stream() properly for slaves at closing. The patch fixes both issues. Signed-off-by:
-
Matthew Ranostay authored
Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch control. Beforehand this was basically a mute switch for the S/PDIF outs as well. Signed-off-by:
-
Takashi Iwai authored
Fujitsu Lifebook P7010 requires ac97_quirk=hp_only. http://bugzilla.kernel.org/show_bug.cgi?id=9100 Signed-off-by: -
Takashi Iwai authored
We have some arithmetic operations against snd_pcm_hw_param_t, thus bitwise isn't correct for it. Better to remove the flag to shut up sparse warnings. Signed-off-by:
-
Matthew Ranostay authored
Patch allows the last DAC in the dac_nids for the hp_nid if there is an available one this isn't in use by a line_out entry or if hp_nid isn't already defined. This solves the issues with the 'Headphone Playback' mixer controls on the 92hd73xxx branch and possibly others. Signed-off-by:
-
- Sep 24, 2008
-
-
Clemens Ladisch authored
After sending a reset command to the UART, wait some time for the ACK to be generated (and to be read and dropped by the interrupt handler) before sending the next command. Signed-off-by:Clemens Ladisch <clemens@ladisch.de>
-
- Sep 23, 2008
-
-
Jean Delvare authored
Convert the tlv320aic3x codec driver to the new (standard) device driver binding model. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Vladimir Barinov <vbarinov@ru.mvista.com> Tested-by:
Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
In previous change "[ALSA] hda-codec - Fix ALC662 DAC mixer mutes", I missed to fix the mixer mute switches also for the auto config model of ALC662. Now mute for mixer items "Front", "Surround", "Center" and "LFE" when available will work too with "auto" model. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
-
David Woodhouse authored
This seems to work if I tell it that it's a mbp3. Not sure if there are actually any differences. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Matthew Ranostay authored
Corrected bounds-checking in stac92xx_auto_create_mux_input_ctls() and added a spec->spdif_labels pointer for custom SPDIF mux labels for non-standard codec connections. Signed-off-by:
-
Mark Brown authored
Implement SPI support for WM8750, cut'n'pasting from the support for WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format is the same for both codecs. Also fix a cut'n'pasted comment in the I2C side of the driver (which was clearly written in the same way) while we're at it. Signed-off-by:
-
Mark Brown authored
The stereo ADC in the WM9713 can be used to produce data for both the standard AC97 interface and the additional voice PCM interface. Support use on both by defining virtual ADCs tied to each accepting the output from the actual ADCs. Reported-by:
Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
-
Mark Brown authored
When built with AC97 support the ASoC core depends on AC97_BUS so force it to be available Kconfig. Signed-off-by:
-
Harald Welte authored
VT1708S' Mic Boost should be hidden in hardware design according to some customers' requirements. However, in case of bugs, it has to be exhibited to normal users, so we need to: * open a software backdoor, which is disabled by default in hardware * re-write .tlv & .info, to indicate the actual necessary info, which we cannot get from amplifier's capabiliies Signed-off-by:
Logan Li <LoganLi@viatech.com.cn> Signed-off-by:
Harald Welte <HaraldWelte@viatech.com> Signed-off-by:
-
Harald Welte authored
As it seems, the recently-sent patch for the 2nd S/PDIF (HDMI) output is not working with alsa-kernel 1.0.18rc3. This patch makes it work by * activating the second S/PDIF output pin in the pin config * consolidating the dig_playback_pcm_prepare() with extra_dig_pcm_prepare() functions * remove the need for an extra hda_pcm_stream structure and rather represents the second digital output as substream within the primary S/PDIF digital out stream. Signed-off-by:
-
Harald Welte authored
Don't enumerate via_hp_mixer while hp_mux is null (headphone does not exist), to fix the crash of via_independent_hp_info (via_hp_mixer's .info), which will reference hp_mux. Signed-off-by:
-
Dmitry Baryshkov authored
ASoC and non-ASoC drivers for PCM DMA on PXA share lots of common code. Move it to pxa2xx-lib. [Fixed some checkpatch warnings -- broonie] Signed-off-by:
Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by:
-
Dmitry Baryshkov authored
Support building of pxa2xx-ac97-lib for several CPUs by making code run-time selected, not only compile-time. [Fixed 3XX->3xx typos in ifdef checks -- broonie.] Signed-off-by:
-
Dmitry Baryshkov authored
ASoC and non-ASoC drivers for ACLINK on PXA share lot's of common code. Move all common code into separate module snd-pxa2xx-lib. [Fixed handing of SND_AC97_CODEC in Kconfig and some checkpatch warnings -- broonie] Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Kenneth Kiraly authored
The WM8971 is a low power, high quality stereo codec designed for portable digital audio applications. This driver was originally written by Kenneth Kiraly. While out of tree it has had updates to reflect current kernel APIs and coding standards from Graeme Gregory and Mark Brown. Signed-off-by:
Kenneth Kiraly <kiraly@lab126.com> Signed-off-by:
Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by:
Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by:
-
Robin H. Johnson authored
Use 6STACK_DIG for the AD2000BX variant of the AD1989B chip used by Asus on their Asus P5Q Premium and Pro boards. Signed-off-by:
Robin H. Johnson <robbat2@gentoo.org> Signed-off-by:
-
Robin H. Johnson authored
Implement the slave_dig_outs for AD1989 cards. Untested due to lack of hardware. Signed-off-by:
-
Robin H. Johnson authored
The Pincap output had a typod format specifier, leading to an extraneous "08" in the output, which is a reserved bit of the Vref field, and was really confused :-). Signed-off-by:
-
Robin H. Johnson authored
Explain some of the magic numbers I saw while trying to fix the AD1989 SPDIF issue. Maybe should just use the expanded form directly in the verbs? Signed-off-by:
-
Robin H. Johnson authored
The SPDIF pins for AD1989 are not enabled by default. Set OUT bit so that they actually work. Also initialize the HDMI SPDIF at the same time. Signed-off-by:
-
Matthew Ranostay authored
Added support for defining the number of amps and the creation of the private_dimux dynamically for the 92hd73xx codec family. Signed-off-by:
-
Uwe Kleine-König authored
Don't use __init but __devinit to define probe function. A pointer to snd_aica_probe is passed to the core via platform_driver_register and so the function must not disappear after the module is loaded. Using __init and having HOTPLUG=y and SND_AICA=m the following probably oopses: echo -n AICA > /sys/bus/platform/driver/AICA/unbind echo -n AICA > /sys/bus/platform/driver/AICA/bind Strange enough add_aicamixer_controls which is only called by snd_aica_probe was already using __devinit. While at it move the remove function to .devexit.text section. Signed-off-by:
Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Matthew Ranostay authored
This patch sets the HP out not used by the "Headphone to Line Out" switch to the hp_nid. Signed-off-by:
-
Matthew Ranostay authored
Added support for controlling hardware gain amps on input ports using a volume control mixer with a mux selecting the port being controlled. Signed-off-by:
-
Matthew Ranostay authored
Added a new quirk for STAC_HP_M4 series for an 92hd75xxx family laptop. Signed-off-by:
-
Herton Ronaldo Krzesinski authored
Many places fail to check if codec has slave_dig_outs entries (the most common case is not having any entry), leading to various possible oopses in hda_codec code. Signed-off-by:
-
Alan Horstmann authored
Ensure wm8731_spi_write byte order is consistent regardless of endianess. Signed-off-by:
Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by:
-
- Sep 22, 2008
-
-
Clemens Ladisch authored
Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe. Signed-off-by: -
Clemens Ladisch authored
Rename the first PCM device from "Analog" to "Multichannel" because it can be used for HDMI output on the Xonar HDAV. Signed-off-by: -
Clemens Ladisch authored
Rename the callback function that switches between line and mic inputs on the Xonar D1 because it is also usable on other models. Signed-off-by:
-
