This reverts commit 6ded69f2.

Differential Revision: https://reviews.llvm.org/D74472

Differential Revision: https://reviews.llvm.org/D72837

The isNegatibleForFree/getNegatedExpression methods currently rely on a raw char value to indicate whether a negation is beneficial or not.

This patch replaces the char return value with an NegatibleCost enum to more clearly demonstrate what is implied.

It also renames isNegatibleForFree to getNegatibleCost to more accurately reflect whats going on.

Differential Revision: https://reviews.llvm.org/D74221

Reviewers: Szelethus

Reviewed By: Szelethus

Subscribers: xazax.hun, baloghadamsoftware, szepet, a.sidorin, mikhail.ramalho, donat.nagy, Charusso, dkrupp, Szelethus, gamesh411, cfe-commits

Tags: #clang

Differential Revision: https://reviews.llvm.org/D73359

This is simpler, faster, and sufficient to uniquely idenify a DIE.

This reverts commit fe6f6cd6.

Found test failure on several buildbots.

Differential Revision: https://reviews.llvm.org/D74476

This patch is a fix following the revert of 72ce7599
(https://reviews.llvm.org/rG72ce759928e6dfee6a9efa310b966c19722352ba)
and fixes the failure that it caused.

The above patch failed on the Thread Sanitizer buildbot with an out of
memory error. After an investigation, the cause was identified as an
explosion in debug intrinsics while running the Jump Threading pass on
ModuleMap.ll. The above patched prevented debug intrinsics from being
dropped when their Basic Block was deleted due to being "empty". In this
case, one of the functions in ModuleMap.ll had (after many optimization
passes) a very large number of debug intrinsics representing a set of
repeatedly inlined variables. Previously the vast majority of these were
silently dropped during Jump Threading when their blocks were deleted,
but as of the above patch they survived for longer, causing a large
increase in the number of debug intrinsics. These intrinsics were then
repeatedly cloned by the Jump Threading pass as edges were threaded,
multiplying the intrinsic count further. The memory consumed by this
process spiralled out of control, crashing the buildbot that uses TSan
(which has an estimated 5-10x memory overhead compared to non-sanitized
builds).

This patch adds RemoveRedundantDbgInstrs to the Jump Threading pass, in
order to reduce the number of debug intrinsics down to a manageable
amount in cases where many intrinsics for the same variable end up
bunched together contiguously, as in this case.

Differential Revision: https://reviews.llvm.org/D73054

With the fixed implementation of the "remainder" operation in
rG9d0956eb, we can now add support to folding calls to it.

Differential Revision: https://reviews.llvm.org/D69777

This reduces the noise caused by adding cases earlier in the sequence.

Reviewed by: dblaikie

Differential Revision: https://reviews.llvm.org/D74402

This reverts commit rG9f6ff07f.

Found a test failure on clang-with-thin-lto-ubuntu buildbot.

This allows us better readability and compatibility with what GNU
objdump prints.

Fixes https://bugs.llvm.org/show_bug.cgi?id=43941

Reviewed by: jhenderson, MaskRay

Differential Revision: https://reviews.llvm.org/D72992

Sema::RequireCompleteTypeImpl is supposed to have an assert that checks that the
SourceLocation that is passed in is always valid. It's currently commented out, but
as soon as this assert goes active, nearly every LLDB expression will start crashing as
we always pass in an invalid SourceLocation from the ASTResultSynthesizer.

This patch just passes in the valid SourceLocation of the expression (which is
the SourceLocation where the complete type is required) to prevent that from happening.

Summary:

This is trying to implement the functionality proposed in:
http://lists.llvm.org/pipermail/cfe-dev/2017-April/053417.html
An exception can throw, but no cleanup is going to happen.
A module compiled with exceptions on, can catch the exception throws
from module compiled with -fignore-exceptions.

The use cases for enabling this option are:
1. Performance analysis of EH instrumentation overhead
2. The ability to QA non EH functionality when EH functionality is not available.
3. User of EH enabled headers knows the calls won't throw in their program and
   wants the performance gain from ignoring EH construct.

The implementation tried to accomplish that by removing any landing pad code
 that might get generated.

Reviewed by: aaron.ballman

Differential Revision: https://reviews.llvm.org/D72644

This causes a crash for the reproducer below

 enum { a };
 enum b { c, d };
 e;
 static _Bool g(struct f *h, enum b i) {
   i &&j();
   return a;
 }
 static k(char h, enum b i) {
   _Bool l = g(e, i);
   l;
 }
 m(h) {
   k(h, c);
   g(h, d);
 }

This reverts commit aadb635e.

Summary:
Right now the alignment of the lower half of a store is computed as
align/2, which fails for unaligned stores (align = 1), and is overly
pessimitic for, e.g. a 8 byte store aligned to 4 bytes.
Fixes PR44851
Fixes PR44877

Reviewers: gchatelet, spatel, lebedev.ri

Subscribers: hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D74311

Summary:
Currently, `SCEVExpander::isHighCostExpansionHelper()` has the following logic:
```
  if (auto *UDivExpr = dyn_cast<SCEVUDivExpr>(S)) {
    // If the divisor is a power of two and the SCEV type fits in a native
    // integer (and the LHS not expensive), consider the division cheap
    // irrespective of whether it occurs in the user code since it can be
    // lowered into a right shift.
    if (auto *SC = dyn_cast<SCEVConstant>(UDivExpr->getRHS()))
      if (SC->getAPInt().isPowerOf2()) {
        if (isHighCostExpansionHelper(UDivExpr->getLHS(), L, At,
                                      BudgetRemaining, TTI, Processed))
          return true;
        const DataLayout &DL =
            L->getHeader()->getParent()->getParent()->getDataLayout();
        unsigned Width = cast<IntegerType>(UDivExpr->getType())->getBitWidth();
        return DL.isIllegalInteger(Width);
      }
```

Since this test does not have a datalayout specified,
`SCEVExpander::isHighCostExpansionHelper()` says that
`[[TMP2:%.*]] = lshr exact i64 [[TMP1]], 5` is high-cost, and didn't perform it.

But future patches will change that logic to solely rely on cost-model,
without any such datalayout checks, so i think it is best to show
that that change is ephemeral, and can already happen without costmodel changes.

Reviewers: reames, fhahn, sanjoy, craig.topper, RKSimon

Reviewed By: RKSimon

Subscribers: javed.absar, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D73717

This patch enables the debug entry values feature.

  - Remove the (CC1) experimental -femit-debug-entry-values option
  - Enable it for x86, arm and aarch64 targets
  - Resolve the test failures
  - Leave the llc experimental option for targets that do not
    support the CallSiteInfo yet

Differential Revision: https://reviews.llvm.org/D73534

In the previous state, we were relying on forcing the linker to include
all libraries in the final binary and the global initializer to self-register
every piece of the system. This change help moving away from this model, and
allow users to compose pieces more freely. The current change is only "fixing"
the dialect registration and avoiding relying on "whole link" for the passes.
The translation is still relying on the global registry, and some refactoring
is needed to make this all more convenient.

Differential Revision: https://reviews.llvm.org/D74461

Beside these two functions just being wrappers around GetTypeName they are also
just a leftover from migrating the CompilerType interface to ConstString.

* Rename CMake target MLIROptMain to MLIROptLib:
   The target provides the main library
* Rename CMake target MLIRMlirOptLib to MLIRMlirOptMain:
   The target provides the main() entry function

At the moment, the Bazel configuration of TenorFlow maps the target
MlirOptLib to "lib/Support/MlirOptMain.cpp" and MlirOptMain to
"tools/mlir-opt/mlir-opt.cpp". This is the other way around in the CMake
configuration. As discussed in the context of the pull request
https://github.com/tensorflow/tensorflow/pull/36301, it seems useful to
revise the naming in the MLIR repo.

Differential Revision: https://reviews.llvm.org/D73778

Reimplement IEEEFloat::remainder() function.

Fix PR3359.

Differential Revision: https://reviews.llvm.org/D69776

CompilerType doesn't implement logic.

Now with the new functionality that allows creating "defines", it is
possible to reduce this test (I tried to find another ones, but seems others
were already fixed previously).

Differential revision: https://reviews.llvm.org/D74392

Summary:
Consider:

  %r = call i32 @llvm.amdgcn.writelane(i32 0, i32 1, i32 2)

This produces a value that is 0 on lane 1, and 2 everywhere else; i.e.,
it is divergent.

Reported-by: Marek Olsak <Marek.Olsak@amd.com>

Reviewers: arsenm, foad, mareko

Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D74400

Summary:
The method attempts to find loads that can be legally clustered by
looking for loads consuming the same chain glue token.

However, the old code looks at _all_ users of values produced by the
chain node -- including uses of the loaded/returned value of volatile
loads or atomics. This could lead to circular dependencies which then
failed during scheduling.

With this change, we filter out users by getResNo, i.e. by which
SDValue value they use, to ensure that we only look at users of the
chain glue token.

This appears to be a rather old bug, which is perhaps surprising.
However, the test case is actually quite fragile (i.e., it is hidden
by fairly small changes), and the test _must_ use volatile loads for
the bug to manifest.

Reviewers: arsenm, bogner, craig.topper, foad

Subscribers: MatzeB, jvesely, wdng, hiraditya, javed.absar, jfb, kerbowa, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D74253

They are all implementation details so let's keep them out of the interface.
Also makes this code more readable by keeping these small classes
not spread over header and source file.

Differential Revision: https://reviews.llvm.org/D74307

Summary: Isel and tests for bswap,brev,ctpop,ctlz,ctty,rotl,rotr

Reviewed By: arsenm

Differential Revision: https://reviews.llvm.org/D74304

It's not used by anyone. Also if something implements its own
completion it could just not call the method instead of having
a parameter that makes the function a no-op.

Tests that should have been with 0daf9b8e