This intention is to move patchable-function before aarch64-branch-targets
(configured in AArch64PassConfig::addPreEmitPass) so that we emit BTI before NOPs
(see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92424).

This also allows addPreEmitPass() passes to know the precise instruction sizes if they want.

Tried x86-64 Debug/Release builds of ccls with -fxray-instrument -fxray-instruction-threshold=1.
No output difference with this commit and the previous commit.

Otherwise they may be picked as the delay slot by mips-delay-slot-filler, if we move patchable-function before mips-delay-slot-filler.

[DebugInfo][test] Change two MIR tests to use -start-before=livedebugvalues instead of -start-after=patchable-function

To break order dependency between livedebugvalues and patchable-function.

Summary:
I think whatever problem the gluing was fixing has long since been fixed. We don't have any of the restrictions on FP stack stuff that existed back when this was first added.

I had to change which type we use for FILD in BuildFILD when X86 was enabled because most of the isel patterns block f32/f64 instructions when SSE1/SSE2 are enabled. So I needed to use the f80 pattern, but this shouldn't have an effect the generated code since there is only one FILD instruction anyway. We already use f80 explicitly in other other places.

Reviewers: RKSimon, spatel

Reviewed By: RKSimon

Subscribers: andrew.w.kaylor, scanon, hiraditya, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D72805

The x86-64 General Dynamic TLS code sequence uses prefixes to allow
linker relaxation.  Adding segment override prefix or NOPs can break
linker relaxation (ld -pie/-no-pie).

i386 General Dynamic and x86-64 Local Dynamic do not use prefixes, but
for simplicity, just disable auto padding consistently.

Reviewed By: skan, LuoYuanke

Differential Revision: https://reviews.llvm.org/D72878

The code added in r98579 is dead now.

D50360 caused some platforms to not compile due to a parameter with the name of a type.

Rename the parameter.

Implement support for C++2a requires-expressions.

Re-commit after compilation failure on some platforms due to alignment issues with PointerIntPair.

Differential Revision: https://reviews.llvm.org/D50360

Resolves PR44055

mlir currently fails to build on Solaris:

  /vol/llvm/src/llvm-project/dist/mlir/lib/Conversion/VectorToLoops/ConvertVectorToLoops.cpp:78:20: error: reference to 'index_t' is ambiguous
    IndexHandle zero(index_t(0)), one(index_t(1));
                     ^
  /usr/include/sys/types.h:103:16: note: candidate found by name lookup is 'index_t'
  typedef short           index_t;
                          ^
  /vol/llvm/src/llvm-project/dist/mlir/include/mlir/EDSC/Builders.h:27:8: note: candidate found by name lookup is 'mlir::edsc::index_t'
  struct index_t {
         ^

and many more.

Given that POSIX reserves all identifiers ending in `_t` 2.2.2 The Name Space <https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html>, it seems
quite unwise to use such identifiers in user code, even more so without a distinguished
prefix.

The following patch fixes this by renaming `index_t` to `index_type`.
cases.

Tested on `amd64-pc-solaris2.11` and `sparcv9-sun-solaris2.11`.

Differential Revision: https://reviews.llvm.org/D72619

This extract the common functionality of enabling and disabling hardware
watchpoints into a single function.

Differential revision: https://reviews.llvm.org/D72971

This reverts commit add95990.

Buildbots don't seem to like it.

Most clients only ever use the default BumpPtrAllocator.

This reverts commit 22af2cbe, due to breakages on ARM platforms.

This reverts commit 02793189.

There have been some failing tests on some platforms, reverting while investigating.

Since it can only ever create VALIGN nodes.

Implement support for C++2a requires-expressions.

Differential Revision: https://reviews.llvm.org/D50360

Those old Makefiles used completely ad-hoc rules for building files,
which means they didn't obey the test harness' variants.

They were somewhat tricky to update as they use very peculiar build
flags for some files. For this reason I was careful to compare the
build commands before and after the change, which is how I found the
discrepancy fixed by the previous commit.

While some of the make syntax used here might not be easy to grasp for
newcomers (per-target variable overrides), it seems better than to
have to repliacte the Makefile.rules logic for the test variants and
platform support.

The test harness invokes the test Makefiles with an explicit 'all'
target, but it's handy to be able to recursively call Makefile.rules
without speficying a goal.

Some time ago, we rewrote some tests in terms of recursive invocations
of Makefile.rules. It turns out this had an unintended side
effect. While using $(MAKE) for a recursive invocation passes all the
variables set on the command line down, it doesn't pass the make
goals. This means that those recursive invocations would invoke the
default rule. It turns out the default rule of Makefile.rules is not
'all', but $(EXE). This means that ti would work becuase the
executable is always needed, but it also means that the created
binaries would not follow some of the other top-level build
directives, like MAKE_DSYM.

Forcing 'all' to be the default target seems easier than making sure
all the invocations are correct going forward. This patch does this
using the .DEFAULT_GOAL directive rather than hoisting the 'all' rule
to be the first one of the file. It seems like this explicit approach
will be less prone to be broken in the future. Hopefully all the make
implementations we use support it.

This makes the SectionLabel handling more resilient - specifically for
future PROPELLER work which will have more CU ranges (rather than just
one per function).

Ultimately it might be nice to make this more general/resilient to
arbitrary labels (rather than relying on the labels being created for CU
ranges & then being reused by ranges, loclists, and possibly other
addresses). It's possible that other (non-rnglist/loclist) uses of
addresses will need the addresses to be in SectionLabels earlier (eg:
move the CU.addRange to be done on function begin, rather than function
end, so during function emission they are already populated for other
use).

Follow on from D72812, based on Mehdi Amini's feedback.

This change has 2 components:

Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded.  That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.

WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run.  Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase

The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.

This is a reland of rG3a05c396 with fixes for the expensive-checks
and Windows builds

Differential Revision: https://reviews.llvm.org/D71681

Summary:
Modernize some of the existing custom parsing code in the LLVM dialect.
While this reduces some boilerplate code, it also reduces the precision
of the diagnostic error messges.

Reviewers: ftynse, nicolasvasilache, rriddle

Reviewed By: rriddle

Subscribers: merge_guards_bot, mehdi_amini, rriddle, jpienaar, burmako, shauheen, antiagainst, arpith-jacob, mgester, lucyrfox, liufengdb, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D72967

Currently there are 4 different mechanisms for controlling denormal
flushing behavior, and about as many equivalent frontend controls.

- AMDGPU uses the fp32-denormals and fp64-f16-denormals subtarget features
- NVPTX uses the nvptx-f32ftz attribute
- ARM directly uses the denormal-fp-math attribute
- Other targets indirectly use denormal-fp-math in one DAGCombine
- cl-denorms-are-zero has a corresponding denorms-are-zero attribute

AMDGPU wants a distinct control for f32 flushing from f16/f64, and as
far as I can tell the same is true for NVPTX (based on the attribute
name).

Work on consolidating these into the denormal-fp-math attribute, and a
new type specific denormal-fp-math-f32 variant. Only ARM seems to
support the two different flush modes, so this is overkill for the
other use cases. Ideally we would error on the unsupported
positive-zero mode on other targets from somewhere.

Move the logic for selecting the flush mode into the compiler driver,
instead of handling it in cc1. denormal-fp-math/denormal-fp-math-f32
are now both cc1 flags, but denormal-fp-math-f32 is not yet exposed as
a user flag.

-cl-denorms-are-zero, -fcuda-flush-denormals-to-zero and
-fno-cuda-flush-denormals-to-zero will be mapped to
-fp-denormal-math-f32=ieee or preserve-sign rather than the old
attributes.

Stop emitting the denorms-are-zero attribute for the OpenCL flag. It
has no in-tree users. The meaning would also be target dependent, such
as the AMDGPU choice to treat this as only meaning allow flushing of
f32 and not f16 or f64. The naming is also potentially confusing,
since DAZ in other contexts refers to instructions implicitly treating
input denormals as zero, not necessarily flushing output denormals to
zero.

This also does not attempt to change the behavior for the current
attribute. The LangRef now states that the default is ieee behavior,
but this is inaccurate for the current implementation. The clang
handling is slightly hacky to avoid touching the existing
denormal-fp-math uses. Fixing this will be left for a future patch.

AMDGPU is still using the subtarget feature to control the denormal
mode, but the new attribute are now emitted. A future change will
switch this and remove the subtarget features.

The existing test is overly reliant on -mattr=-flat-for-global, and
some missing optimizations to re-use.

Avoids 637 extra FoldingSet.h and Allocator.h includes. FoldingSet.h
needs Allocator.h, which is relatively expensive.

Header files included wrongly using <...> are now included using the
internal path names as the new unittest framework allows us to do so.

Reviewers: phosek, abrachet

Differential Revision: https://reviews.llvm.org/D72743

It's been an empty target since r360498 and friends
(`git log --grep='Move InstPrinter files to MCTargetDesc.' llvm/lib/Target`),
but due to hwo the way these targets are structured it was silently
an empty target without anyone noticing.

No behavior change.

A TemplateIdAnnotation represents only a template-id, not a
nested-name-specifier plus a template-id. Don't make a redundant copy of
the CXXScopeSpec and store it on the template-id annotation.

This slightly improves error recovery by more properly handling the case
where we would form an invalid CXXScopeSpec while parsing a typename
specifier, instead of accidentally putting the token stream into a
broken "annot_template_id with a scope specifier, but with no preceding
annot_cxxscope token" state.