I've been seeing memory leaks on my system in the form of large
(300-400MB) GEM objects created by now-dead processes laying around
clogging up memory.  I usually notice when it gets to about 1.2GB of
them.  Hopefully this clears up the issue, but I just found this bug
by inspection.

Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: stable@kernel.org
Signed-off-by: Keith Packard <keithp@keithp.com>

Use of the struct_mutex is not correct for locking in mode setting paths.

Signed-off-by: Keith Packard <keithp@keithp.com>

Kernels with no iommu support cannot ever need the Ironlake
work-around, so never enable it in that case.

Might be better to completely remove the work-around from the kernel
in this case?

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>

The semi-colon is a typo here and it makes the if statement
unconditional.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

Shouldn't hide these behind _DRIVER, they're all KMS-related.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

... not DISPLAY_VGA, because we ignore the VGA subclass with our
class_mask.

It confused me until Chris Wilson clued me up.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

<ajax> i'm getting tempted to just disable temporal
<mjg59> Approved.
<ajax> apparently it makes the screen look pulse-y which is worse
than the disease.

References: http://lists.freedesktop.org/archives/intel-gfx/2011-October/012545.html


Tested-by: Олег Герман <oleg.german@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>

* 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (290 commits)
  Revert "drm/ttm: add a way to bo_wait for either the last read or last write"
  Revert "drm/radeon/kms: add a new gem_wait ioctl with read/write flags"
  vmwgfx: Don't pass unused arguments to do_dirty functions
  vmwgfx: Emulate depth 32 framebuffers
  drm/radeon: Lower the severity of the radeon lockup messages.
  drm/i915/dp: Fix eDP on PCH DP on CPT/PPT
  drm/i915/dp: Introduce is_cpu_edp()
  drm/i915: use correct SPD type value
  drm/i915: fix ILK+ infoframe support
  drm/i915: add DP test request handling
  drm/i915: read full receiver capability field during DP hot plug
  drm/i915/dp: Remove eDP special cases from bandwidth checks
  drm/i915/dp: Fix the math in intel_dp_link_required
  drm/i915/panel: Always record the backlight level again (but cleverly)
  i915: Move i915_read/write out of line
  drm/i915: remove transcoder PLL mashing from mode_set per specs
  drm/i915: if transcoder disable fails, say which
  drm/i915: set watermarks for third pipe on IVB
  drm/i915: export a CPT mode set verification function
  drm/i915: fix transcoder PLL select masking
  ...

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64, doc: Remove int 0xcc from entry_64.S documentation
  x86, vsyscall: Add missing <asm/fixmap.h> to arch/x86/mm/fault.c

Fix up trivial conflicts in arch/x86/mm/fault.c (asm/fixmap.h vs
asm/vsyscall.h: both work, which to use? Whatever..)

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: uv2: Workaround for UV2 Hub bug (system global address format)

* 'x86-spinlocks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, ticketlock: remove obsolete comment
  x86, cmpxchg: Use __compiletime_error() to make usage messages a bit nicer
  x86, ticketlock: Make __ticket_spin_trylock common
  x86, ticketlock: Convert __ticket_spin_lock to use xadd()
  x86, ticketlock: Convert spin loop to C
  x86, ticketlock: Clean up types and accessors
  x86: Use xadd helper more widely
  x86: Add xadd helper macro
  x86, cmpxchg: Unify cmpxchg into cmpxchg.h
  x86, cmpxchg: Move 64-bit set64_bit() to match 32-bit
  x86, cmpxchg: Move 32-bit __cmpxchg_wrong_size to match 64 bit.
  x86, cmpxchg: <linux/alternative.h> has LOCK_PREFIX

* 'x86-rdrand-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, random: Verify RDRAND functionality and allow it to be disabled
  x86, random: Architectural inlines to get random integers with RDRAND
  random: Add support for architectural random hooks

Fix up trivial conflicts in drivers/char/random.c: the architectural
random hooks touched "get_random_int()" that was simplified to use MD5
and not do the keyptr thing any more (see commit 6e5714ea: "net:
Compute protocol sequence numbers and fragment IDs using MD5").

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Add microcode revision to /proc/cpuinfo
  x86, microcode: Correct microcode revision format
  coretemp: Get microcode revision from cpu_data
  x86, intel: Use c->microcode for Atom errata check
  x86, intel: Output microcode revision in /proc/cpuinfo
  x86, microcode: Don't request microcode from userspace unnecessarily

Fix up trivial conflicts in arch/x86/kernel/cpu/amd.c (conflict between
moving AMD BSP code to cpu_dev helper function and adding AMD microcode
revision to /proc/cpuinfo code)

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Hyper-V: Integrate the clocksource with Hyper-V detection code

Fix up conflicts in drivers/staging/hv/Makefile manually (some of the hv
code has moved out of staging to drivers/hv/)

* 'x86-geode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: geode: New PCEngines Alix system driver

* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu: Add cpufeature flag for PCIDs

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, amd: Include linux/elf.h since we use stuff from asm/elf.h
  x86: cache_info: Update calculation of AMD L3 cache indices
  x86: cache_info: Kill the atomic allocation in amd_init_l3_cache()
  x86: cache_info: Kill the moronic shadow struct
  x86: cache_info: Remove bogus free of amd_l3_cache data
  x86, amd: Include elf.h explicitly, prepare the code for the module.h split
  x86-32, amd: Move va_align definition to unbreak 32-bit build
  x86, amd: Move BSP code to cpu_dev helper
  x86: Add a BSP cpu_dev helper
  x86, amd: Avoid cache aliasing penalties on AMD family 15h

This reverts commit dfadbbdb

.

Further upstream discussion between Marek and Thomas decided this wasn't
fully baked and needed further work, so revert it before it hits mainline.

Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit d3ed7402

.

Further upstream discussion between Thomas and Marek decided this needed
more work and driver specifics. So revert before it goes upstream.

Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (68 commits)
  Input: adp5589-keys - add support for the ADP5585 derivatives
  Input: imx_keypad - add pm suspend and resume support
  Input: force feedback - potential integer wrap in input_ff_create()
  Input: tsc2007 - make sure that X plate resistance is specified
  Input: serio_raw - fix memory leak when closing char device
  Input: serio_raw - kick clients when disconnecting port
  Input: serio_raw - explicitly mark disconnected ports as dead
  Input: serio_raw - fix coding style issues
  Input: serio_raw - use dev_*() for messages
  Input: serio_raw - use bool for boolean data
  Input: serio_raw - perform proper locking when adding clients to list
  Input: serio_raw - rename serio_raw_list to serio_raw_client
  Input: serio_raw - use kref instead of rolling out its own refcounting
  Input: psmouse - switch to using dev_*() for messages
  Input: wacom - correct max Y value on medium bamboos
  Input: wacom - add ABS_DISTANCE to Bamboo Pen reports
  Input: wacom - remove unneeded touch pressure initialization
  Input: lm8323 - wrap suspend and resume in CONFIG_PM_SLEEP
  Input: ad7879-i2c - wrap suspend and resume in CONFIG_PM_SLEEP
  Input: synaptics_i2c - wrap suspend and resume in CONFIG_PM_SLEEP
  ...

* 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7131/1: clkdev: Add Common Macro for clk_lookup
  clk: spi-pl022: convert to clk_prepare()/clk_unprepare()
  clk: timer-sp: convert to clk_prepare()/clk_unprepare()
  clk: sa1111: convert to clk_prepare()/clk_unprepare()
  clk: mmci: convert to clk_prepare()/clk_unprepare()
  clk: amba-pl011: convert to clk_prepare()/clk_unprepare()
  clk: amba-pl010: convert to clk_prepare()/clk_unprepare()
  clk: amba-clcd: convert to clk_prepare()/clk_unprepare()
  clk: amba bus: convert to clk_prepare()/clk_unprepare()
  clk: provide prepare/unprepare functions

* 'amba' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7079/1: spi: Fix builderror in spi-pl022.c
  PM: add runtime PM support to MMCI
  PM: add runtime PM support to core Primecell driver

* 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits)
  ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h>
  ARM: 7104/1: plat-pxa: break out GPIO driver specifics
  ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem
  ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics
  ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h>
  ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h
  ARM: 7083/1: rewrite U300 GPIO to use gpiolib
  ARM: 7074/1: gpio: davinci: eliminate unused variable warnings
  ARM: 7063/1: Orion: gpio: add missing include of linux/types.h
  ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build
  ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio
  ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq
  ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio
  ARM: 7057/1: mach-pnx4008: rename GPIO header
  ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h>
  ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function
  ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem
  ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics
  ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem
  ARM: 7043/1: mach-ixp2000: rename GPIO header
  ...

Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually

In my last patch I did a stupid mistake and broke the exofs
compilation completely. Fix it ASAP.

Instead of obj-y I did obj-$(y)

Really Really sorry. Me totally blushing :-{|

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6:
  of_mdio: Don't phy_scan_fixups() twice
  Devicetree: Expand on ARM Primecell binding documentation
  dt: Add empty of_match_node() macro
  dt: add empty dt helpers for non-dt build
  devicetree: fix build error on drivers/tty/serial/altera_jtaguart.c
  devicetree: Add ARM pl022 spi controller binding doc
  devicetree: Add ARM pl061 gpio controller binding doc
  of/irq: of_irq_find_parent: check for parent equal to child
  MAINTAINERS: update devicetree maintainers
  dt: add helper to read 64-bit integers
  tty: use of_match_ptr() for of_match_table entry
  OF: Add of_match_ptr() macro
  dt: add empty for_each_child_of_node, of_find_property
  devicetree: Document Qualcomm and Atmel prefixes
  serial/imx: add of_alias_get_id() reference back
  dt: add of_alias_scan and of_alias_get_id
  devicetree: Add a registry of vendor prefixes

* 'upstream-linus' of git://github.com/jgarzik/libata-dev: (50 commits)
  pata_efar: fix register naming used in efar_set_piomode()
  pata_rdc: add Power Management support
  ata_piix: unify code for programming PIO and MWDMA timings
  ata_piix: SITRE handling fix
  libata: make ata_sff_data_xfer_noirq() work with 32-bit PIO
  pata_artop: add Power Management support
  pata_sl82c105: add Power Management support
  pata_pdc2027x: add Power Management support
  pata_legacy: use PIO mask defines
  pata_legacy: unify QDI ->set_piomode methods
  libata: remove no longer needed pata_qdi driver
  pata_it8213: fix register naming used in it8213_set_piomode()
  pata_it8213: add UDMA100 and UDMA133 support
  pata_rdc: parallel scanning needs an extra locking
  pata_via: add via_fixup()
  libata: ata_timing_compute() fixup
  pata_scc: add proper cable detection method
  pata_arasan_cf: remove bogus to_platform_device() calls
  pata_atiixp: add proper ->prereset method
  pata_serverworks: add serverworks_fixup()
  ...

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  tools, slub: Fix off-by-one buffer corruption after readlink() call
  slub: Discard slab page when node partial > minimum partial number
  slub: correct comments error for per cpu partial
  mm: restrict access to slab files under procfs and sysfs
  slub: Code optimization in get_partial_node()
  slub: doc: update the slabinfo.c file path
  slub: explicitly document position of inserting slab to partial list
  slub: update slabinfo tools to report per cpu partial list statistics
  slub: per cpu cache for partial pages
  slub: return object pointer from get_partial() / new_slab().
  slub: pass kmem_cache_cpu pointer to get_partial()
  slub: Prepare inuse field in new_slab()
  slub: Remove useless statements in __slab_alloc
  slub: free slabs without holding locks
  slub: use print_hex_dump
  slab: use print_hex_dump

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: irq: remove IRQF_DISABLED
  Blackfin: boards: clean up i2c_board_info
  Blackfin: drop unused Kconfig symbol
  Blackfin: bf537-stamp: register ASoC EVAL-ADAU1373 board driver
  Blackfin: bf537-stamp: Register adav801 codec and ASoC machine driver
  Blackfin: bf537-stamp: register adau1701 codec and asoc machine driver
  Blackfin: merge asm/mutex.h into kbuild too
  Blackfin: bf537-stamp: fix ad73311 codec config macro
  Blackfin: bf537-stamp: fix ad1836 name
  Blackfin: kgdb_test: rework code to avoid -O0 usage
  Blackfin: fix sparse warnings in copy_to/from_user
  Blackfin: bf548-ezkit: update defconfig
  Blackfin: SMP: fix scheduling deadlock
  Blackfin: H8606: fixup bogus ioresource init
  Blackfin: SMP: convert to common asm-generic/atomic.h

* 'for-linus' of git://neil.brown.name/md: (34 commits)
  md: Fix some bugs in recovery_disabled handling.
  md/raid5: fix bug that could result in reads from a failed device.
  lib/raid6: Fix filename emitted in generated code
  md.c: trivial comment fix
  MD: Allow restarting an interrupted incremental recovery.
  md: clear In_sync bit on devices added to an active array.
  md: add proper write-congestion reporting to RAID1 and RAID10.
  md: rename "mdk_personality" to "md_personality"
  md/bitmap remove fault injection options.
  md/raid5: typedef removal: raid5_conf_t -> struct r5conf
  md/raid1: typedef removal: conf_t -> struct r1conf
  md/raid10: typedef removal: conf_t -> struct r10conf
  md/raid0: typedef removal: raid0_conf_t -> struct r0conf
  md/multipath: typedef removal: multipath_conf_t -> struct mpconf
  md/linear: typedef removal: linear_conf_t -> struct linear_conf
  md/faulty: remove typedef: conf_t -> struct faulty_conf
  md/linear: ...

* 'for-linus' of git://git.open-osd.org/linux-open-osd: (21 commits)
  ore: Enable RAID5 mounts
  exofs: Support for RAID5 read-4-write interface.
  ore: RAID5 Write
  ore: RAID5 read
  fs/Makefile: Always inspect exofs/
  ore: Make ore_calc_stripe_info EXPORT_SYMBOL
  ore/exofs: Change ore_check_io API
  ore/exofs: Define new ore_verify_layout
  ore: Support for partial component table
  ore: Support for short read/writes
  exofs: Support for short read/writes
  ore: Remove check for ios->kern_buff in _prepare_for_striping to later
  ore: cleanup: Embed an ore_striping_info inside ore_io_state
  ore: Only IO one group at a time (API change)
  ore/exofs: Change the type of the devices array (API change)
  ore: Make ore_striping_info and ore_calc_stripe_info public
  exofs: Remove unused data_map member from exofs_sb_info
  exofs: Rename struct ore_components comps => oc
  exofs/super.c: local functions should be static
  exofs/ore.c: local ...

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64, unistd: Remove bogus __IGNORE_getcpu
  x86, mm, trivial: Remove unnecessary get_order() in free_thread_info()
  x86, cleanup: Remove unneeded version.h include from arch/x86/

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Fix CFI data for interrupt frames
  x86-64: Don't apply destructive erratum workaround on unaffected CPUs

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Standardize on CONFIG_SPARSE_IRQ=y
  x86, ioapic: Clean up ioapic/apic_id usage
  x86, ioapic: Factor out print_IO_APIC() to only print one io apic
  x86, ioapic: Print out irte with right ioapic index
  x86, ioapic: Split up setup_ioapic_entry()
  x86, ioapic: Pass struct irq_attr * to setup_ioapic_irq()
  apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches

Mark Einon points out that the Kconfig option for NETDEV_1000 no longer
exists, and the merge of the staging drivers should have removed that
for the et131x driver.

And while checking for it, I noticed that slicoss had the same stale
dependency.  Remove that one too.

Reported-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  time, s390: Get rid of compile warning
  dw_apb_timer: constify clocksource name
  time: Cleanup old CONFIG_GENERIC_TIME references that snuck in
  time: Change jiffies_to_clock_t() argument type to unsigned long
  alarmtimers: Fix error handling
  clocksource: Make watchdog reset lockless
  posix-cpu-timers: Cure SMP accounting oddities
  s390: Use direct ktime path for s390 clockevent device
  clockevents: Add direct ktime programming function
  clockevents: Make minimum delay adjustments configurable
  nohz: Remove "Switched to NOHz mode" debugging messages
  proc: Consider NO_HZ when printing idle and iowait times
  nohz: Make idle/iowait counter update conditional
  nohz: Fix update_ts_time_stat idle accounting
  cputime: Clean up cputime_to_usecs and usecs_to_cputime macros
  alarmtimers: Rework RTC device sel...

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  llist: Add back llist_add_batch() and llist_del_first() prototypes
  sched: Don't use tasklist_lock for debug prints
  sched: Warn on rt throttling
  sched: Unify the ->cpus_allowed mask copy
  sched: Wrap scheduler p->cpus_allowed access
  sched: Request for idle balance during nohz idle load balance
  sched: Use resched IPI to kick off the nohz idle balance
  sched: Fix idle_cpu()
  llist: Remove cpu_relax() usage in cmpxchg loops
  sched: Convert to struct llist
  llist: Add llist_next()
  irq_work: Use llist in the struct irq_work logic
  llist: Return whether list is empty before adding in llist_add()
  llist: Move cpu_relax() to after the cmpxchg()
  llist: Remove the platform-dependent NMI checks
  llist: Make some llist functions inline
  sched, tracing: Show PREEMPT_ACTIVE state in trace_sched_switch
  sched:...

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix insn decoder for longer instruction

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
  perf symbols: Increase symbol KSYM_NAME_LEN size
  perf hists browser: Refuse 'a' hotkey on non symbolic views
  perf ui browser: Use libslang to read keys
  perf tools: Fix tracing info recording
  perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
  perf hists: Don't consider filtered entries when calculating column widths
  perf hists: Don't decay total_period for filtered entries
  perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
  perf hists browser: Do not exit on tab key with single event
  perf annotate browser: Don't change selection line when returning from callq
  perf tools: handle endianness of feature bitmap
  perf tools: Add prelink suggestion to dso update message
  perf script: Fix unknown feature comment
  perf hists browser: Apply the dso and thread filters when merging new batches
  perf hists: Move the dso and thread filters from hist_browser
  perf ui browser: Honour the xterm colors
  perf top tui: Give color hints just on the percentage, like on --stdio
  perf ui browser: Make the colors configurable and change the defaults
  perf tui: Remove unneeded call to newtCls on startup
  perf hists: Don't format the percentage on hist_entry__snprintf
  ...

Fix up conflicts in arch/x86/kernel/kprobes.c manually.

Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?).  But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..

Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge.  Make
sure that new use also uses the raw accessor functions.