- Jun 18, 2023
-
-
JuenKit Yip authored
Compared to sht3x, sts3x has the similar functions and operations but it has no humidity sensor. Signed-off-by:
JuenKit Yip <JuenKit_Yip@hotmail.com> Link: https://lore.kernel.org/r/DB4PR10MB6261B912ADFA6BB78240596F9258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
JuenKit Yip authored
Add "repeatability" attribute to sysfs, it could be read or written to control the sensor. Signed-off-by:
-
- Jun 17, 2023
-
-
JuenKit Yip authored
Add support for medium repeatability. Per datasheet: The stated repeatability is 3 times the standard deviation (3σ) of multiple consecutive measurements at the stated repeatability and at constant ambient conditions. It is a measure for the noise on the physical sensor output. Different measurement modes allow for high/medium/low repeatability. For the humidity sensor, repeatability is documented as 0.25% RH for low repeatability, 0.15% RH for medium repeatability, and 0.10% RH for high repeatability. Support all three modes. Signed-off-by:
-
JuenKit Yip authored
Replace use of "precision" with "repeatability" to match datasheet terminology. No functional change. Signed-off-by:
-
JuenKit Yip authored
Due to no support on clock-strench, blocking mode was removed and now single-shot mode only uses non-blocking mode. Signed-off-by:
-
JuenKit Yip authored
Since no in-tree driver supports it, sht3x_platform_data has been removed and the relevant properties have been moved to sht3x_data. Signed-off-by:
-
- Jun 10, 2023
-
-
Guenter Roeck authored
New revisions of MAX16508 report MAX16508.xx or MAX16508y.xx as device ID, but are functionally similar to MAX16508. Add support for those chip variants. Cc: Vlad Sytchenko <vsytch@google.com> Cc: Steve Foreman <foremans@google.com> Signed-off-by: -
Yongsheng Yang authored
Use devm_hwmon_device_register_with_info to replace hwmon_device_register_with_info in description of devm_hwmon_device_unregister. Signed-off-by:
Yongsheng Yang <iyysheng@gmail.com> Reviewed-by:
Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20230609075510.1305-1-iyysheng@gmail.com Signed-off-by:
-
Mark Brown authored
The tmp464 is only capable of performing single register read and write operations which means it gains no advantage from using a rbtree register cache, convert it to using the more modern maple tree register cache instead. This should be more efficient. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230609-hwmon-maple-v1-5-8edacce86b28@kernel.org Signed-off-by:
-
Mark Brown authored
The tmp108 is only capable of performing single register read and write operations which means it gains no advantage from using a rbtree register cache, convert it to using the more modern maple tree register cache instead. This should be more efficient. Signed-off-by:
-
Mark Brown authored
The tmp102 is only capable of performing single register read and write operations which means it gains no advantage from using a rbtree register cache, convert it to using the more modern maple tree register cache instead. This should be more efficient. Signed-off-by:
-
Mark Brown authored
The lm95245 is only capable of performing single register read and write operations which means it gains no advantage from using a rbtree register cache, convert it to using the more modern maple tree register cache instead. This should be more efficient. Signed-off-by:
-
Mark Brown authored
The lm75 is only capable of performing single register read and write operations which means it gains no advantage from using a rbtree register cache, convert it to using the more modern maple tree register cache instead. This should be more efficient. Signed-off-by:
-
- Jun 08, 2023
-
-
Frank Crawford authored
Support for FAN_CTL ON/OFF is currently disabled only for IT8603E but there are severl chips that don't support the configuration bits to turn off fan control entirely. Generalise this support for any chip. Add feature flag FEAT_FANCTL_ONOFF for chips that support configuration bits for management of fan control off and assign all chips that support the configuration. Signed-off-by:
Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20230527094756.3464256-1-frank@crawford.emu.id.au Signed-off-by:
-
Osama Muhammad authored
This patch removes the error checking for debugfs_create_dir in adm1266.c. This is because the debugfs_create_dir() does not return NULL but an ERR_PTR after an error. The DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes.The debugfs Api handles it gracefully. The check is unnecessary. Link to the comment above debugfs_create_dir: https://elixir.bootlin.com/linux/latest/source/fs/debugfs/inode.c#L565 Signed-off-by:
Osama Muhammad <osmtendev@gmail.com> Link: https://lore.kernel.org/r/20230526163938.9903-1-osmtendev@gmail.com Signed-off-by:
-
Osama Muhammad authored
This patch removes the error checking for debugfs_create_dir in ucd9000.c. This is because the debugfs_create_dir() does not return NULL but an ERR_PTR after an error. The DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes.The debugfs Api handles it gracefully. The check is unnecessary. Link to the comment above debugfs_create_dir: https://elixir.bootlin.com/linux/latest/source/fs/debugfs/inode.c#L565 Signed-off-by:
-
Arnd Bergmann authored
Checking for Kconfig symbols with #if is wrong: drivers/hwmon/hp-wmi-sensors.c:1141:5: error: "CONFIG_DEBUG_FS" is not defined, evaluates to 0 [-Werror=undef] This could be an #ifdef, but an IS_ENABLED() check is even better to give the best compile coverage. Fixes: 23902f98 ("hwmon: add HP WMI Sensors driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
James Seo <james@equiv.tech> Link: https://lore.kernel.org/r/20230601213216.3220550-1-arnd@kernel.org Signed-off-by:
-
James Seo authored
Hewlett-Packard (and some HP Compaq) business-class computers report hardware monitoring information via WMI. This driver exposes that information to hwmon. Initial support is provided for temperature, fan speed, and intrusion sensor types. Provisional support is provided for voltage and current sensor types. HP's WMI implementation permits many other types of numeric sensors. Therefore, a debugfs interface is also provided to enumerate and inspect all numeric sensors visible on the WMI side. This should facilitate adding support for other sensor types in the future. Tested on a HP Z420, a HP EliteOne 800 G1, and a HP Compaq Elite 8300 SFF. Note that provisionally supported sensor types are untested and seem to be rare-to-nonexistent in the wild, having been encountered neither on test systems nor in ACPI dumps from the Linux Hardware Database. They are included because their popularity in general makes their presence on past or future HP systems plausible and because no doubt exists as to how the sensors themselves would be represented in WMI (alarm attributes will need to wait for hardware to be located). A 2005 HP whitepaper gives the relevant sensor object MOF definition and sensor value scaling calculation, and both this driver and the official HP Performance Advisor utility comply with them (confirmed in the latter case by reverse engineering). Link: https://h20331.www2.hp.com/hpsub/downloads/cmi_whitepaper.pdf Signed-off-by:
-
Joaquín Ignacio Aramendía authored
We don't need to pass device structure to write_to_ec() so we remove that from the function declaration. The same is valid for pwm_enable() and pwm_disable() as we were passing the pointer to hand it off to write_to_ec(). Signed-off-by:
Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20230525142652.41981-1-samsagax@gmail.com Signed-off-by:
-
Daniel Matyas authored
MAX31827 is a low-power temperature switch with I2C interface. The device is a ±1°C accuracy from -40°C to +125°C (12 bits) local temperature switch and sensor with I2C/SM- Bus interface. The combination of small 6-bump wafer-lev- el package (WLP) and high accuracy makes this temper- ature sensor/switch ideal for a wide range of applications. Signed-off-by:
Daniel Matyas <daniel.matyas@analog.com> Link: https://lore.kernel.org/r/20230524160131.14081-2-daniel.matyas@analog.com [groeck: Improved define alignment, return -EINVAL after bad user input, fixed up compatible statement] Signed-off-by:
-
Daniel Matyas authored
MAX31827 is a low-power temperature switch with I2C interface. The device is a ±1°C accuracy from -40°C to +125°C (12 bits) local temperature switch and sensor with I2C/SM- Bus interface. The combination of small 6-bump wafer-lev- el package (WLP) and high accuracy makes this temper- ature sensor/switch ideal for a wide range of applications. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230524160131.14081-1-daniel.matyas@analog.com Signed-off-by:
-
Kirill Yatsenko authored
Add support for compatible AHT20 temperature/humidity sensor. The only difference between the two is that AHT20 has additional crc8 byte. It seems like AHT15 is also supported by the driver but it wasn't verified and tested yet. Tested on Beaglebone black rev C. Signed-off-by:
Kirill Yatsenko <kiriyatsenko@gmail.com> Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com Signed-off-by:
-
Joaquín Ignacio Aramendía authored
A newer BIOS version for the OneXPlayer Mini AMD modified vendor and board name strings. Add those to the match table and set the same board model as older OXP Mini AMD. Signed-off-by:
-
Aleksa Savic authored
Extend aquacomputer_d5next driver to expose various hardware sensors of the Aquacomputer Leakshield leak prevention system, which communicates through a proprietary USB HID protocol. Implemented by Noah Bergbauer [1]. Two temperature sensors are exposed, along with pressure (current, min, max and target), reservoir volume (total and filled), pump speed and flow. Pump speed and flow values are user provided and allow the Leakshield to optimize its operation. Writing them to the device is subject of future patches. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/41 Originally-from: Noah Bergbauer <main@ehvag.de> Signed-off-by:
Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20230520095447.509287-3-savicaleksa83@gmail.com Signed-off-by:
-
Aleksa Savic authored
Rename the macro in question to AQC_SENSOR_NA because more than just temperature sensors use this value to indicate that they don't have a reading. Implemented by Noah Bergbauer [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/41 Originally-from: Noah Bergbauer <main@ehvag.de> Signed-off-by:
-
Kirill Yatsenko authored
Exit from the function immediately if the poll time hasn't yet expired. Therefore the code after the check can be moved one tab to the left which improves readability. Signed-off-by:
-
Kirill Yatsenko authored
Fix typos in the description of the return value section of the functions. The word 'succesfull' is incorrect, it should be 'successful'. Signed-off-by:
-
James Seo authored
Commit 848ba0a2 ("hwmon: (core) Rename groups parameter in API to extra_groups") renames the 'groups' parameter of devm_hwmon_device_register_with_info() to 'extra_groups' in hwmon-kernel-api.txt (later .rst) and hwmon.h, but this change was not propagated to the function code itself in hwmon.c. Finish the job. Note that hwmon_device_register_with_info() has the same parameter, and the name of that parameter was changed in all three files. Harmonizing the name between these related functions also removes a potential source of confusion. Signed-off-by:
-
James Seo authored
beep_enable, inX_beep, currX_beep, fanX_beep, and tempX_beep are standard attributes mentioned in the sysfs interface specification but not implemented in the hwmon core. Since these are not deprecated, implement them. Adding beep_mask is not necessary, as it is deprecated and the drivers already using it are manually defining it. Signed-off-by:
-
Gopal Prasad authored
This value was found on a MSI Z690-A PRO DDR5 with NCT6687D. Signed-off-by:
Gopal Prasad <llyyr.public@gmail.com> Link: https://lore.kernel.org/r/20230517042025.16942-1-llyyr.public@gmail.com Signed-off-by:
-
James Seo authored
Move the entry for the inspur-ipsps1 driver so that it no longer appears in the hwmon docs TOC as a document relating to the hwmon subsystem itself. Signed-off-by:
-
Uwe Kleine-König authored
After commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230505131718.1210071-1-u.kleine-koenig@pengutronix.de [groeck: Added missing change in pmbus/acbel-fsg032.c] Signed-off-by:
-
Frank Crawford authored
Some chips are known to only have 4 temperature sensors and there is no requirement to test for more. Currently only the IT8622E fits this category. Signed-off-by:
-
Chris Packham authored
Instead of of_property_read_*() use the equivalent device_property_read_*() API. This will allow these properties to be used on DT unaware platforms. For DT aware platforms this will be a noop. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230418233656.869055-3-chris.packham@alliedtelesis.co.nz Signed-off-by:
-
Frank Crawford authored
Add support for 4 fans and 4 PWMs to chipset IT8732F. Signed-off-by:
-
Frank Crawford authored
Add feature and support for chips with only 4 PWMs. Signed-off-by:
-
Frank Crawford authored
Add feature and support for chips with only 4 fans. Reorder macro definitions to bring all fan definitions together. Signed-off-by:
-
Joaquín Ignacio Aramendía authored
Change .driver_data = (void *) &(enum type) {enum_literal}; to more readable form: .driver_data = (void *) enum_literal; and corresponding cast usage as board type flag. Signed-off-by: -
Michael Carns authored
Only the temp sensors that I can verify are present. HWINFO in Windows shows other accumulated data and statistics (time since installed, total power used, etc) that I have not attempted to find. Signed-off-by:
Michael Carns <mike@carns.com> Signed-off-by:
Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20230426200345.65765-1-eugene.shalygin@gmail.com Signed-off-by:
-
Joaquín Ignacio Aramendía authored
Add support for handhelds with same EC registers - AYANEO 2 - AYANEO GEEK All functionality tests succeed on AYANEO 2 by "pastaq" user on Discord and AYANEO GEEK tested by "oneoc" Discord user. Signed-off-by:
-
