- Configure controller so MHI bus master clock will be switched off while
  in ASPM L1.x states (Manivannan Sadhasivam)

- Add sa8775p DT binding and driver support (Mrinmay Sarkar)

- Fix broken DT SDX65 "compatible" property (Krzysztof Kozlowski)

* pci/controller/qcom:
  dt-bindings: PCI: qcom: Fix SDX65 compatible
  PCI: qcom: Add support for sa8775p SoC
  dt-bindings: PCI: qcom: Add sa8775p compatible
  PCI: qcom-ep: Switch MHI bus master clock off during L1SS

- Fix DED and SEC interrupt bit offsets so interrupt handlers work
  correctly (Daire McNamara)

- Make driver buildable as a module (Daire McNamara)

- Reorganize register #defines to align with hardware docs (Daire McNamara)

- Tweak register accessors to simplify callers (Daire McNamara)

- Refactor interrupt initialisation (Daire McNamara)

- Read FPGA MSI configuration parameters from hardware instead of
  hard-coding them (Daire McNamara)

- Re-partition code between probe() and init() (Daire McNamara)

* pci/controller/microchip:
  PCI: microchip: Re-partition code between probe() and init()
  PCI: microchip: Gather MSI information from hardware config registers
  PCI: microchip: Clean up initialisation of interrupts
  PCI: microchip: Enable event handlers to access bridge and control pointers
  PCI: microchip: Align register, offset, and mask names with HW docs
  PCI: microchip: Enable building driver as a module
  PCI: microchip: Correct the DED and SEC interrupt bit offsets

- Add support for link-down notification so the endpoint driver can process
  LINK_DOWN events (Frank Li)

- Save Link Capabilities during probe so they can be restored when handling
  a link-up event, since the controller loses the Link Width and Link Speed
  values during reset (Xiaowei Bao)

* pci/controller/layerscape:
  PCI: layerscape: Add workaround for lost link capabilities during reset
  PCI: layerscape: Add support for link-down notification

- Use of_property_read_bool() instead of low-level accessors for boolean
  properties (Rob Herring)

* pci/controller/iproc:
  PCI: iproc: Use of_property_read_bool() for boolean properties

- To avoid a NULL pointer dereference, skip MSI restore after hibernate if
  MSI/MSI-X hasn't been enabled (Dexuan Cui)

* pci/controller/hv:
  PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation

- Set the supported number of MSI vectors so we can use all available MSI
  interrupts (Yong-Xuan Wang)

* pci/controller/fu740:
  PCI: fu740: Set the number of MSI vectors

- Add an imx6 .host_deinit() callback so we can clean up things like
  regulators on probe failure or driver unload (Mark Brown)

- Add PCIE_PME_TO_L2_TIMEOUT_US value for controller drivers that need to
  manually synchronize power removal (Frank Li)

- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
  dw_pcie_resume_noirq()) to be called by controller driver suspend/resume
  ops, and a controller callback to send PME_Turn_Off (Frank Li)

- Add layerscape suspend/resume support, including manual
  PME_Turn_off/PME_TO_Ack handshake (Hou Zhiqiang, Frank Li)

* pci/controller/dwc:
  PCI: layerscape: Add power management support for ls1028a
  PCI: dwc: Implement generic suspend/resume functionality
  PCI: Add PCIE_PME_TO_L2_TIMEOUT_US L2 ready timeout value
  PCI: dwc: Provide deinit callback for i.MX

- Assert PERST# when probing BCM2711 because some bootloaders don't do it
  (Jim Quinlan)

* pci/controller/brcmstb:
  PCI: brcmstb: Remove stale comment
  PCI: brcmstb: Assert PERST# on BCM2711

- Initialize pcie->nvecs (number of available MSIs) before use (Sven Peter)

* pci/controller/apple:
  PCI: apple: Initialize pcie->nvecs before use

- Ensure device is accessible before VPD access via sysfs (Alex Williamson)

- Ensure device doesn't go to a low-power state while we're polling for PME
  (Alex Williamson)

* pci/vpd:
  PCI: Fix runtime PM race with PME polling
  PCI/VPD: Add runtime power management to sysfs interface

- Correct parameter types for vga_str_to_iostate() and
  vga_update_device_decodes() (Sui Jingfeng)

- Simplify vga_arbiter_notify_clients() (Sui Jingfeng)

- Simplify vga_client_register() (Sui Jingfeng)

- Replace MIT license text with SPDX identifier (Sui Jingfeng)

- Fix lots of comment typos (Sui Jingfeng)

* pci/vga:
  PCI/VGA: Fix typos
  PCI/VGA: Replace full MIT license text with SPDX identifier
  PCI/VGA: Simplify vga_client_register()
  PCI/VGA: Simplify vga_arbiter_notify_clients()
  PCI/VGA: Correct vga_update_device_decodes() parameter type
  PCI/VGA: Correct vga_str_to_iostate() io_state parameter type

- Avoid bus resets on NVIDIA T4 GPUs because they don't seem to recover (Wu
  Zongyong)

* pci/virtualization:
  PCI: Mark NVIDIA T4 GPUs to avoid bus reset

- Only read PCI_PM_CTRL register when available, to avoid reading the wrong
  register and corrupting dev->current_state (Feiyang Chen)

* pci/pm:
  PCI/PM: Only read PCI_PM_CTRL register when available

- Add locking for read/modify/write PCIe Capability Register accessors for
  Link Control and Root Control (Ilpo Järvinen)

- Use PCIe RMW accessors for Link Control updates in PCI core, pciehp,
  amdgpu, radeon, mlx5, ath10k, ath11k, ath12k (Ilpo Järvinen)

- Convert PCIBIOS error values in mlx5 to generic errnos (Ilpo Järvinen)

- Simplify pcie_capability_clear_and_set_word() control flow (Bjorn
  Helgaas)

* pci/pcie-rmw:
  PCI: Simplify pcie_capability_clear_and_set_word() control flow
  net/mlx5: Convert PCI error values to generic errnos
  PCI: Document the Capability accessor RMW improvements
  wifi: ath10k: Use RMW accessors for changing LNKCTL
  wifi: ath12k: Use RMW accessors for changing LNKCTL
  wifi: ath11k: Use RMW accessors for changing LNKCTL
  net/mlx5: Use RMW accessors for changing LNKCTL
  drm/radeon: Use RMW accessors for changing LNKCTL
  drm/amdgpu: Use RMW accessors for changing LNKCTL
  PCI/ASPM: Use RMW accessors for changing LNKCTL
  PCI: pciehp: Use RMW accessors for changing LNKCTL
  PCI: Make link retraining use RMW accessors for changing LNKCTL
  PCI: Add locking to RMW PCI Express Capability Register accessors

- Make I/O resources depend on CONFIG_HAS_IOPORT so inw() and friends can
  be completely omitted on architectures without I/O port support (Niklas
  Schnelle)

* pci/ioport:
  PCI/sysfs: Make I/O resource depend on HAS_IOPORT
  PCI: Make quirk using inw() depend on HAS_IOPORT

- Make ibmphp read-only arrays static instead of putting them on the stack
  (Colin Ian King)

* pci/hotplug:
  PCI: ibmphp: Make read-only arrays static

- Remove pci_disable_pcie_error_reporting() (unused) and unexport
  pci_enable_pcie_error_reporting().  This all done by the PCI core now
  (Bjorn Helgaas)

* pci/aer:
  PCI/AER: Unexport pci_enable_pcie_error_reporting()
  PCI/AER: Drop unused pci_disable_pcie_error_reporting()

Commit c0aba9f3 ("dt-bindings: PCI: qcom: Add SDX65 SoC") adding
SDX65 was never tested and is clearly bogus.  The qcom,sdx65-pcie-ep
compatible is followed by a fallback in DTS, and there is no driver
matched by this compatible.  Driver matches by its fallback
qcom,sdx55-pcie-ep.  This also fixes dtbs_check warnings like:

  qcom-sdx65-mtp.dtb: pcie-ep@1c00000: compatible: ['qcom,sdx65-pcie-ep', 'qcom,sdx55-pcie-ep'] is too long

[kwilczynski: commit log]
Fixes: c0aba9f3 ("dt-bindings: PCI: qcom: Add SDX65 SoC")
Link: https://lore.kernel.org/linux-pci/20230827085351.21932-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org

For a device with no Power Management Capability, pci_power_up() previously
returned 0 (success) if the platform was able to put the device in D0,
which led to pci_set_full_power_state() trying to read PCI_PM_CTRL, even
though it doesn't exist.

Since dev->pm_cap == 0 in this case, pci_set_full_power_state() actually
read the wrong register, interpreted it as PCI_PM_CTRL, and corrupted
dev->current_state.  This led to messages like this in some cases:

  pci 0000:01:00.0: Refused to change power state from D3hot to D0

To prevent this, make pci_power_up() always return a negative failure code
if the device lacks a Power Management Capability, even if non-PCI platform
power management has been able to put the device in D0.  The failure will
prevent pci_set_full_power_state() from trying to access PCI_PM_CTRL.

Fixes: e200904b ("PCI/PM: Split pci_power_up()")
Link: https://lore.kernel.org/r/20230824013738.1894965-1-chenfeiyang@loongson.cn


Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org	# v5.19+

Add support for sa8775p SoC that uses controller version 5.90
reusing the 1.9.0 config.

Link: https://lore.kernel.org/linux-pci/1689960276-29266-3-git-send-email-quic_msarkar@quicinc.com


Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>

Add sa8775p platform to the binding.

Link: https://lore.kernel.org/linux-pci/1689960276-29266-2-git-send-email-quic_msarkar@quicinc.com


Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>

Return early for errors in pcie_capability_clear_and_set_word_unlocked()
and pcie_capability_clear_and_set_dword() to simplify the control flow.

No functional change intended.

Link: https://lore.kernel.org/r/20230824193712.542167-13-helgaas@kernel.org


Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Fix typos, rewrap to fill 78 columns, convert to conventional multi-line
style.

[bhelgaas: squash and add more fixes]
Link: https://lore.kernel.org/r/20230808223412.1743176-7-sui.jingfeng@linux.dev
Link: https://lore.kernel.org/r/20230808223412.1743176-9-sui.jingfeng@linux.dev
Link: https://lore.kernel.org/r/20230808223412.1743176-10-sui.jingfeng@linux.dev
Link: https://lore.kernel.org/r/20230808223412.1743176-11-sui.jingfeng@linux.dev


Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

A comment says that Multi-MSI is not supported by the driver.
A past commit [1] added this feature, so the comment is
incorrect and is removed.

[1] commit 198acab1 ("PCI: brcmstb: Enable Multi-MSI")

Link: https://lore.kernel.org/r/20230623144100.34196-6-james.quinlan@broadcom.com


Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>

The current PCIe driver assumes PERST# is asserted when probe() is invoked.
Some older versions of the 2711/RPi bootloader left PERST# unasserted, as
the Raspian OS does assert PERST# on probe().  For this reason, we assert
PERST# for BCM2711 SOCs (i.e. RPi).

Link: https://lore.kernel.org/r/20230623144100.34196-5-james.quinlan@broadcom.com


Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>

Add PME_Turn_off/PME_TO_Ack handshake sequence for ls1028a platform.

Implemented on top of common dwc dw_pcie_suspend(resume)_noirq()
functions to handle system enter/exit suspend states.

Link: https://lore.kernel.org/r/20230821184815.2167131-4-Frank.Li@nxp.com


Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>

Introduce an helper function (dw_pcie_get_ltssm()) to retrieve
SMLH_LTSS_STATE.

Add common dw_pcie_suspend(resume)_noirq() API to implement the DWC
controller generic suspend/resume functionality.

Add a controller specific callback to send the PME_Turn_Off message
(ie .pme_turn_off) for controller platform specific PME handling.

Link: https://lore.kernel.org/r/20230821184815.2167131-3-Frank.Li@nxp.com


Signed-off-by: Frank Li <Frank.Li@nxp.com>
[lpieralisi@kernel.org: commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>

Add the PCIE_PME_TO_L2_TIMEOUT_US macro to define the L2 ready timeout
as described in the PCI specifications.

Link: https://lore.kernel.org/r/20230821184815.2167131-2-Frank.Li@nxp.com


Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>

The endpoint controller loses the Maximum Link Width and Supported Link Speed
value from the Link Capabilities Register - initially configured by the Reset
Configuration Word (RCW) - during a link-down or hot reset event.

Address this issue in the endpoint event handler.

Link: https://lore.kernel.org/r/20230720135834.1977616-2-Frank.Li@nxp.com
Fixes: a805770d

 ("PCI: layerscape: Add EP mode support")
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>

Add support to pass link-down notification to the endpoint function
driver so that it can process the LINK_DOWN event.

Link: https://lore.kernel.org/r/20230720135834.1977616-1-Frank.Li@nxp.com


Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>

Per Documentation/process/license-rules.rst, the SPDX MIT identifier is
equivalent to including the entire MIT license text from
LICENSES/preferred/MIT.

Replace the MIT license text with the equivalent SPDX identifier.

Link: https://lore.kernel.org/r/20230808223412.1743176-12-sui.jingfeng@linux.dev


Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>

Reorganize vga_client_register() to avoid the goto and the need to save the
return value.  Update the kernel-doc to reflect -ENODEV on failure.  No
functional change intended.

[bhelgaas: drop "ret" variable, commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-8-sui.jingfeng@linux.dev


Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

In vga_arbiter_notify_clients(), "new_state" was computed during every loop
iteration even though it doesn't depend on anything that changes during the
loop.   Move the computation outside the loop.

[bhelgaas: drop renames that obscure the purpose, commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-6-sui.jingfeng@linux.dev


Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Previously vga_update_device_decodes() took "int new_decodes", but the
callers pass "unsigned int new_decodes".  Correct the
vga_update_device_decodes() parameter type to "unsigned int" to match.

In vga_arbiter_notify_clients(), the return from vgadev->set_decode() is
"unsigned int" but was stored as "uint32_t new_decodes".  Correct the
new_decodes type to "unsigned int".

[bhelgaas: use correct type for ->set_decode() return, commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-5-sui.jingfeng@linux.dev


Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Previously vga_str_to_iostate() took "int *io_state", but vga_arb_write()
is the only caller and it passes "unsigned int *".  Make the
vga_str_to_iostate() parameter type "unsigned int *" to match.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-2-sui.jingfeng@linux.dev


Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

The iMSI-RX module of the DW PCIe controller provides multiple sets of
MSI_CTRL_INT_i_* registers, and each set is capable of handling 32 MSI
interrupts. However, the fu740 PCIe controller driver only enabled one set
of MSI_CTRL_INT_i_* registers, as the total number of supported interrupts
was not specified.

Set the supported number of MSI vectors to enable all the MSI_CTRL_INT_i_*
registers on the fu740 PCIe core, allowing the system to fully utilize the
available MSI interrupts.

Link: https://lore.kernel.org/r/20230807055621.2431-1-yongxuan.wang@sifive.com


Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.

Avoid the panic by checking if MSI-X/MSI is enabled.

Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com
Fixes: dc2b4532

 ("PCI: hv: Rework MSI handling")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by:  <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org

mlx5_pci_link_toggle() returns a mix of PCI-specific error codes and
generic errnos.

Convert the PCI-specific error values to generic errno using
pcibios_err_to_errno() before returning them.

Fixes: eabe8e5e ("net/mlx5: Handle sync reset now event")
Fixes: 212b4d72 ("net/mlx5: Wait for firmware to enable CRS before pci_restore_state")
Link: https://lore.kernel.org/r/20230814132721.26608-1-ilpo.jarvinen@linux.intel.com


Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: rebase to pci/pcie-rmw, also convert in mlx5_check_dev_ids()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Documentation claims port service drivers should play nice with respect to
PCIe Capability changes, but the concurrency control is now provided in the
Capability accessors as long as the correct ones are used.

Update the documention to match the RMW accessor behavior.

Link: https://lore.kernel.org/r/20230717120503.15276-12-ilpo.jarvinen@linux.intel.com


Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.

Use RMW capability accessors which does proper locking to avoid losing
concurrent updates to the register value. On restore, clear the ASPMC field
properly.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 76d870ed ("ath10k: enable ASPM")
Link: https://lore.kernel.org/r/20230717120503.15276-11-ilpo.jarvinen@linux.intel.com


Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Kalle Valo <kvalo@kernel.org>