A memory leak was reported when floppy_alloc_disk() failed in
do_floppy_init().

unreferenced object 0xffff888115ed25a0 (size 8):
  comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s)
  hex dump (first 8 bytes):
    00 ac 67 5b 81 88 ff ff                          ..g[....
  backtrace:
    [<000000007f457abb>] __kmalloc_node+0x4c/0xc0
    [<00000000a87bfa9e>] blk_mq_realloc_tag_set_tags.part.0+0x6f/0x180
    [<000000006f02e8b1>] blk_mq_alloc_tag_set+0x573/0x1130
    [<0000000066007fd7>] 0xffffffffc06b8b08
    [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
    [<00000000e26d04ee>] do_init_module+0x1a4/0x680
    [<000000001bb22407>] load_module+0x6249/0x7110
    [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
    [<000000007bddca46>] do_syscall_64+0x35/0x80
    [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
unreferenced object 0xffff88810fc30540 (size 32):
  comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000007f457abb>] __kmalloc_node+0x4c/0xc0
    [<000000006b91eab4>] blk_mq_alloc_tag_set+0x393/0x1130
    [<0000000066007fd7>] 0xffffffffc06b8b08
    [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
    [<00000000e26d04ee>] do_init_module+0x1a4/0x680
    [<000000001bb22407>] load_module+0x6249/0x7110
    [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
    [<000000007bddca46>] do_syscall_64+0x35/0x80
    [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

If the floppy_alloc_disk() failed, disks of current drive will not be set,
thus the lastest allocated set->tag cannot be freed in the error handling
path. A simple call graph shown as below:

 floppy_module_init()
   floppy_init()
     do_floppy_init()
       for (drive = 0; drive < N_DRIVE; drive++)
         blk_mq_alloc_tag_set()
           blk_mq_alloc_tag_set_tags()
             blk_mq_realloc_tag_set_tags() # set->tag allocated
         floppy_alloc_disk()
           blk_mq_alloc_disk() # error occurred, disks failed to allocated

       ->out_put_disk:
       for (drive = 0; drive < N_DRIVE; drive++)
         if (!disks[drive][0]) # the last disks is not set and loop break
           break;
         blk_mq_free_tag_set() # the latest allocated set->tag leaked

Fix this problem by free the set->tag of current drive before jump to
error handling path.

Cc: stable@vger.kernel.org
Fixes: 302cfee1

 ("floppy: use a separate gendisk for each media format")
Signed-off-by: Yuan Can <yuancan@huawei.com>
[efremov: added stable list, changed title]
Signed-off-by: Denis Efremov <efremov@linux.com>

With the removal of the pktcdvd driver, there are no in-kernel users of
the devnode callback in struct block_device_operations, so it can be
safely removed.  If it is needed for new block drivers in the future, it
can be brought back.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221203140747.1942969-1-gregkh@linuxfoundation.org


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.2/block

Pull MD fixes from Song:

"This contains code cleanup by Christoph."

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: fold unbind_rdev_from_array into md_kick_rdev_from_array
  md: mark md_kick_rdev_from_array static
  md: remove lock_bdev / unlock_bdev

Way back in 2016 in commit 5a8b187c

 ("pktcdvd: mark as unmaintained
and deprecated") this driver was marked as "will be removed soon".  5
years seems long enough to have it stick around after that, so finally
remove the thing now.

Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Maier <balagi@justmail.de>
Cc: Peter Osterlund <petero2@telia.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221202182758.1339039-1-gregkh@linuxfoundation.org


Signed-off-by: Jens Axboe <axboe@kernel.dk>

unbind_rdev_from_array is only called from md_kick_rdev_from_array, so
merge it into its only caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

md_kick_rdev_from_array is only used in md.c, so unexport it and mark
the symbol static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

These wrappers for blkdev_get / blkdev_put just horribly confuse the
code with their odd naming.  Remove them and improve the error unwinding
in md_import_device with the now folded code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

Make the description of @gendisk to @disk in blkcg_schedule_throttle()
to clear the below warnings:

block/blk-cgroup.c:1850: warning: Function parameter or member 'disk' not described in 'blkcg_schedule_throttle'
block/blk-cgroup.c:1850: warning: Excess function parameter 'gendisk' description in 'blkcg_schedule_throttle'

Fixes: de185b56 ("blk-cgroup: pass a gendisk to blkcg_schedule_throttle")
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3338


Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221202011713.14834-1-yang.lee@linux.alibaba.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

In zoned mode, zones with write pointers can have conditions "read-only"
or "offline". In read-only condition, zones can not be written. In
offline condition, the zones can be neither written nor read. These
conditions are intended for zones with media failures, then it is
difficult to set those conditions to zones on real devices.

To test handling of zones in the conditions, add a feature to null_blk
to set up zones in read-only or offline condition. Add new configuration
attributes "zone_readonly" and "zone_offline". Write a sector to the
attribute files to specify the target zone to set the zone conditions.
For example, following command lines do it:

   echo 0 > nullb1/zone_readonly
   echo 524288 > nullb1/zone_offline

When the specified zones are already in read-only or offline condition,
normal empty condition is restored to the zones. These condition changes
can be done only after the null_blk device get powered, since status
area of each zone is not yet allocated before power-on.

Also improve zone condition checks to inhibit all commands for zones in
offline conditions. In same manner, inhibit write and zone management
commands for zones in read-only condition.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221201061036.2342206-1-shinichiro.kawasaki@wdc.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-6-christoph.boehmwalder@linbit.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use call site specific ratelimit instead of one single static global.
Also ratelimit ASSERTION messages generated by expect().

Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-5-christoph.boehmwalder@linbit.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Incorporate as many out-of-tree changes as possible without changing the
genl API.

Over the years, we restructured this several times, and also changed the
log format.

One breaking change is that DRBD 9 gained "implicit options", like a
connection name. This cannot be replayed here without changing the API,
so save it for later.

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Originally-from: Philipp Reisner <philipp.reisner@linbit.com>
Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-4-christoph.boehmwalder@linbit.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-3-christoph.boehmwalder@linbit.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Unify how failed assertions from D_ASSERT() and expect() are logged.

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-2-christoph.boehmwalder@linbit.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use only one hyphen in kernel-doc notation between the function name
and its short description.

The is the documented kerenl-doc format. It also fixes the HTML
presentation to be consistent with other functions.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20221201070331.25685-1-rdunlap@infradead.org


Signed-off-by: Jens Axboe <axboe@kernel.dk>

There is no iocg_pd_init function. The pd_alloc_fn function pointer of
iocost policy is set with ioc_pd_init. Just correct it.

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-6-shikemeng@huawei.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we trace vtime_base_rate instead of vtime_rate, there is nowhere
which accesses now->vrate except function ioc_now using now->vrate locally.
Just remove it.

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-5-shikemeng@huawei.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since commit ac33e91e ("blk-iocost: implement vtime loss
compensation") rename original vtime_rate to vtime_base_rate
and current vtime_rate is original vtime_rate with compensation.
The current rate showed in tracepoint is mixed with vtime_rate
and vtime_base_rate:
1) In function ioc_adjust_base_vrate, the first trace_iocost_ioc_vrate_adj
shows vtime_rate, the second trace_iocost_ioc_vrate_adj shows
vtime_base_rate.
2) In function iocg_activate shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_activate...
3) In function ioc_check_iocgs shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_idle...

Trace vtime_base_rate instead of vtime_rate as:
1) Before commit ac33e91e

 ("blk-iocost: implement vtime loss
compensation"), the traced rate is without compensation, so still
show rate without compensation.
2) The vtime_base_rate is more stable while vtime_rate heavily depends on
excess budeget on current period which may change abruptly in next period.

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-4-shikemeng@huawei.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since commit ac33e91e

("blk-iocost: implement vtime loss compensation")
split vtime_rate into vtime_rate and vtime_base_rate, we need reset both
vtime_base_rate and vtime_rate when device parameters are refreshed.
If vtime_base_rate is no reset here, vtime_rate will be overwritten with
old vtime_base_rate soon in ioc_refresh_vrate.

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-3-shikemeng@huawei.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

soley -> solely

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-2-shikemeng@huawei.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since commit 10c70d95 ("block: remove the bd_openers checks in
blk_drop_partitions") we allow rereading of partition table although
there are users of the block device. This has an undesirable consequence
that e.g. if sda and sdb are assembled to a RAID1 device md0 with
partitions, BLKRRPART ioctl on sda will rescan partition table and
create sda1 device. This partition device under a raid device confuses
some programs (such as libstorage-ng used for initial partitioning for
distribution installation) leading to failures.

Fix the problem refusing to rescan partitions if there is another user
that has the block device exclusively open.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221130135344.2ul4cyfstfs3znxg@quack3
Fixes: 10c70d95

 ("block: remove the bd_openers checks in blk_drop_partitions")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221130175653.24299-1-jack@suse.cz


[axboe: fold in followup fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ida_simple[get|remove] are deprecated, and are just wrappers to
ida_[alloc_range|free]. Replace ida_simple[get|remove] with their
corresponding counterparts.

No functional changes.

Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20221130123001.25473-1-p.raghav@samsung.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

We can't just say that the last reference release may block, as any
reference dropped could be the last one.  So move the might_sleep() from
blk_free_queue to blk_put_queue and update the documentation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-6-hch@lst.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

The kobject embedded into the request_queue is used for the queue
directory in sysfs, but that is a child of the gendisks directory and is
intimately tied to it.  Move this kobject to the gendisk and use a
refcount_t in the request_queue for the actual request_queue refcounting
that is completely unrelated to the device model.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-5-hch@lst.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk_register_queue fails to handle errors from blk_mq_sysfs_register,
leaks various resources on errors and accidentally sets queue refs percpu
refcount to percpu mode on kobject_add failure.  Fix all that by
properly unwinding on errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-4-hch@lst.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Split the debugfs removal from blk_unregister_queue into a helper so that
the it can be reused for blk_register_queue error handling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-3-hch@lst.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Prepare for changes to the block layer sysfs handling by passing the
readily available gendisk to blk_crypto_sysfs_{,un}register.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042637.1009333-2-hch@lst.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit dae590a6.

We've had a few reports on this causing a crash at boot time, because
of a reference issue. While this problem seemginly did exist before
the patch and needs solving separately, this patch makes it a lot
easier to trigger.

Link: https://lore.kernel.org/linux-block/CA+QYu4oxiRKC6hJ7F27whXy-PRBx=Tvb+-7TQTONN8qTtV3aDA@mail.gmail.com/
Link: https://lore.kernel.org/linux-block/69af7ccb-6901-c84c-0e95-5682ccfb750c@acm.org/


Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have bool type now, update the old signature.

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/0db0a0298758d60d0f4df8b7126ac6a381e5a5bb.1669736350.git.nickyc975@zju.edu.cn


Signed-off-by: Jens Axboe <axboe@kernel.dk>

The "pointer + offset" pattern is more resonable.

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/d9beaee71b14f7b2a39ab0db6458dc0f7d961ceb.1669736350.git.nickyc975@zju.edu.cn


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Printing e->elevator_name in all cases improves the readability, and
'e' and 'cur' are identical in this branch.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Link: https://lore.kernel.org/r/4bae180ffbac608ea0cf46ffa9739ce0973b60aa.1669736350.git.nickyc975@zju.edu.cn


Signed-off-by: Jens Axboe <axboe@kernel.dk>

else-if is more readable than continue here.

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Link: https://lore.kernel.org/r/77ac19ba556efd2c8639a6396eb4203c59bc13d6.1669736350.git.nickyc975@zju.edu.cn


Signed-off-by: Jens Axboe <axboe@kernel.dk>

This makes the printing order of the io schedulers consistent, and removes
a redundant q->elevator check.

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/bdd7083ed4f232e3285f39081e3c5f30b20b8da2.1669736350.git.nickyc975@zju.edu.cn


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe updates from Christoph:

"nvme updates for Linux 6.2

 - support some passthrough commands without CAP_SYS_ADMIN
   (Kanchan Joshi)
 - refactor PCIe probing and reset (Christoph Hellwig)
 - various fabrics authentication fixes and improvements (Sagi Grimberg)
 - avoid fallback to sequential scan due to transient issues
   (Uday Shankar)
 - implement support for the DEAC bit in Write Zeroes (Christoph Hellwig)
 - allow overriding the IEEE OUI and firmware revision in configfs for
   nvmet (Aleksandr Miloserdov)
 - force reconnect when number of queue changes in nvmet (Daniel Wagner)
 - minor fixes and improvements (Uros Bizjak, Joel Granados,
   Sagi Grimberg, Christoph Hellwig, Christophe JAILLET)"

* tag 'nvme-6.2-2022-11-29' of git://git.infradead.org/nvme: (45 commits)
  nvmet: expose firmware revision to configfs
  nvmet: expose IEEE OUI to configfs
  nvme: rename the queue quiescing helpers
  nvmet: fix a memory leak in nvmet_auth_set_key
  nvme: return err on nvme_init_non_mdts_limits fail
  nvme: avoid fallback to sequential scan due to transient issues
  nvme-rdma: stop auth work after tearing down queues in error recovery
  nvme-tcp: stop auth work after tearing down queues in error recovery
  nvme-auth: have dhchap_auth_work wait for queues auth to complete
  nvme-auth: remove redundant auth_work flush
  nvme-auth: convert dhchap_auth_list to an array
  nvme-auth: check chap ctrl_key once constructed
  nvme-auth: no need to reset chap contexts on re-authentication
  nvme-auth: remove redundant deallocations
  nvme-auth: clear sensitive info right after authentication completes
  nvme-auth: guarantee dhchap buffers under memory pressure
  nvme-auth: don't keep long lived 4k dhchap buffer
  nvme-auth: remove redundant if statement
  nvme-auth: don't override ctrl keys before validation
  nvme-auth: don't ignore key generation failures when initializing ctrl keys
  ...

Rename deadline_is_seq_writes() to deadline_is_seq_write() (remove the
"s" plural) to more correctly reflect the fact that this function tests
a single request, not multiple requests.

Fixes: 015d02f4

 ("block: mq-deadline: Do not break sequential write streams to zoned HDDs")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221126025550.967914-2-damien.lemoal@opensource.wdc.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

There's issue as follows when do fault injection test:
unreferenced object 0xffff888132a9f400 (size 512):
  comm "insmod", pid 308021, jiffies 4324277909 (age 509.733s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 f4 a9 32 81 88 ff ff  ...........2....
    08 f4 a9 32 81 88 ff ff 00 00 00 00 00 00 00 00  ...2............
  backtrace:
    [<00000000e8952bb4>] kmalloc_node_trace+0x22/0xa0
    [<00000000f9980e0f>] blk_mq_alloc_and_init_hctx+0x3f1/0x7e0
    [<000000002e719efa>] blk_mq_realloc_hw_ctxs+0x1e6/0x230
    [<000000004f1fda40>] blk_mq_init_allocated_queue+0x27e/0x910
    [<00000000287123ec>] __blk_mq_alloc_disk+0x67/0xf0
    [<00000000a2a34657>] 0xffffffffa2ad310f
    [<00000000b173f718>] 0xffffffffa2af824a
    [<0000000095a1dabb>] do_one_initcall+0x87/0x2a0
    [<00000000f32fdf93>] do_init_module+0xdf/0x320
    [<00000000cbe8541e>] load_module+0x3006/0x3390
    [<0000000069ed1bdb>] __do_sys_finit_module+0x113/0x1b0
    [<00000000a1a29ae8>] do_syscall_64+0x35/0x80
    [<000000009cd878b0>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fault injection context as follows:
 kobject_add
 blk_mq_register_hctx
 blk_mq_sysfs_register
 blk_register_queue
 device_add_disk
 null_add_dev.part.0 [null_blk]

As 'blk_mq_register_hctx' may already add some objects when failed halfway,
but there isn't do fallback, caller don't know which objects add failed.
To solve above issue just do fallback when add objects failed halfway in
'blk_mq_register_hctx'.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221117022940.873959-1-yebin@huaweicloud.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Syzbot found the following issue:
general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5234 Comm: syz-executor931 Not tainted 6.1.0-rc3-next-20221102-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
RIP: 0010:__elevator_get block/elevator.h:94 [inline]
RIP: 0010:blk_mq_elv_switch_none block/blk-mq.c:4593 [inline]
RIP: 0010:__blk_mq_update_nr_hw_queues block/blk-mq.c:4658 [inline]
RIP: 0010:blk_mq_update_nr_hw_queues+0x304/0xe40 block/blk-mq.c:4709
RSP: 0018:ffffc90003cdfc08 EFLAGS: 00010206
RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 000000000000001d RSI: 0000000000000002 RDI: 00000000000000e8
RBP: ffff88801dbd0000 R08: ffff888027c89398 R09: ffffffff8de2e517
R10: fffffbfff1bc5ca2 R11: 0000000000000000 R12: ffffc90003cdfc70
R13: ffff88801dbd0008 R14: ffff88801dbd03f8 R15: ffff888027c89380
FS:  0000555557259300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005d84c8 CR3: 000000007a7cb000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 nbd_start_device+0x153/0xc30 drivers/block/nbd.c:1355
 nbd_start_device_ioctl drivers/block/nbd.c:1405 [inline]
 __nbd_ioctl drivers/block/nbd.c:1481 [inline]
 nbd_ioctl+0x5a1/0xbd0 drivers/block/nbd.c:1521
 blkdev_ioctl+0x36e/0x800 block/ioctl.c:614
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:870 [inline]
 __se_sys_ioctl fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

As after dd6f7f17

 commit move '__elevator_get(qe->type)' before set
'qe->type', so will lead to access wild pointer.
To solve above issue get 'qe->type' after set 'qe->type'.

Reported-by:  <syzbot+746a4eece09f86bc39d7@syzkaller.appspotmail.com>
Fixes:dd6f7f17

("block: add proper helpers for elevator_type module refcount management")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221107033956.3276891-1-yebin@huaweicloud.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

A submitter workqueue is dynamically allocated by init_submitter()
called by drbd_create_device(), we should destroy it when this
device is not needed or destroyed.

Fixes: 113fef9e

 ("drbd: prepare to queue write requests on a submit worker")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-3-bobo.shaobowang@huawei.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

This revert c2258ffc

 ("drbd: poison free'd device, resource and
connection structs"), add memset is odd here for debugging, there are
some methods to accurately show what happened, such as kdump.

Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

mq-deadline ensures an in order dispatching of write requests to zoned
block devices using a per zone lock (a bit). This implies that for any
purely sequential write workload, the drive is exercised most of the
time at a maximum queue depth of one.

However, when such sequential write workload crosses a zone boundary
(when sequentially writing multiple contiguous zones), zone write
locking may prevent the last write to one zone to be issued (as the
previous write is still being executed) but allow the first write to the
following zone to be issued (as that zone is not yet being writen and
not locked). This result in an out of order delivery of the sequential
write commands to the device every time a zone boundary is crossed.

While such behavior does not break the sequential write constraint of
zoned block devices (and does not generate any write error), some zoned
hard-disks react badly to seeing these out of order writes, resulting in
lower write throughput.

This problem can be addressed by always dispatching the first request
of a stream of sequential write requests, regardless of the zones
targeted by these sequential writes. To do so, the function
deadline_skip_seq_writes() is introduced and used in
deadline_next_request() to select the next write command to issue if the
target device is an HDD (blk_queue_nonrot() being false).
deadline_fifo_request() is modified using the new
deadline_earlier_request() and deadline_is_seq_write() helpers to ignore
requests in the fifo list that have a preceding request in lba order
that is sequential.

With this fix, a sequential write workload executed with the following
fio command:

fio  --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \
     --size=68719476736  --ioengine=libaio --iodepth=32 --rw=write \
     --bs=65536

results in an increase from 225 MB/s to 250 MB/s of the write throughput
of an SMR HDD (11% increase).

Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>