- Mar 25, 2023
-
-
Menna Mahmoud authored
Remove unnecessary blank line before struct as reported by checkpatch: " CHECK: Please don't use multiple blank lines " Signed-off-by:
Menna Mahmoud <eng.mennamahmoud.mm@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230322113735.31214-1-eng.mennamahmoud.mm@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and not used. Remove initialization, variable and enum as it is dead code. Signed-off-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/2ce85c1a159ae376d82c19c61e694924f07d1093.1679732276.git.philipp.g.hortmann@gmail.com Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function _rtl92e_get_channel_map as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function _rtl92e_get_supported_wireless_mode as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove conditions in function _rtl92e_set_rf_power_state as those are dead code. Removed unnecessary blank lines to shorten code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove conditions in function _rtl92e_set_bw_mode_work_item as those are dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function _rtl92e_phy_switch_channel_step as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function _rtl92e_set_tx_power_level as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function rtl92e_config_phy as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function rtl92e_set_tx_power as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove conditions in function _rtl92e_phy_rf_write as those are dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove conditions in function _rtl92e_phy_rf_read as those are dead code. Signed-off-by:
-
Khadija Kamran authored
Remove unnecessary blank lines after an open brace to adhere to the Linux kernel coding-style guidelines. These issues are reported by checkpatch.pl "CHECK: Blank lines aren't necessary after an open brace '{'" Signed-off-by:Khadija Kamran <kamrankhadijadj@gmail.com> Tested-by:
-
Khadija Kamran authored
Use spaces around binary operators as suggested by Linux kernel coding style guidelines. Issues reported by checkpatch.pl for the following binary operators: + , - , * , | , << Signed-off-by:
-
Khadija Kamran authored
Add blank lines after declarations to adhere to the Linux kernel coding-style guidelines. These issues are reported by checkpatch.pl "CHECK: Please use a blank line after function/struct/union/enum declarations" Signed-off-by:
-
Khadija Kamran authored
Remove the extra blank line in accordance with the Linux kernel coding-style regulations. These issues were reported by checkpatch.pl "CHECK: Please don't use multiple blank lines" Signed-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c:1961:18: error: unused function 'ieee80211_SignalStrengthTranslate' [-Werror,-Wunused-function] static inline u8 ieee80211_SignalStrengthTranslate( ^ This function is not used so remove it. It may have been used in the past but that has been commented out. Also remove the comment. Signed-off-by:Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230323165931.2634587-1-trix@redhat.com Signed-off-by:
-
Philipp Hortmann authored
Replace macro iwe_stream_add_point_rsl with standard function iwe_stream_add_point to increase readability. Signed-off-by:
-
Philipp Hortmann authored
Replace macro iwe_stream_add_event_rsl with standard function iwe_stream_add_event to increase readability. Signed-off-by:
-
Philipp Hortmann authored
Replace macro container_of_work_rsl with standard macro container_of to increase readability. Signed-off-by:
-
Philipp Hortmann authored
Replace macro INIT_WORK_RSL with standard macro INIT_WORK to increase readability. Signed-off-by:
-
Philipp Hortmann authored
Replace macro INIT_DELAYED_WORK_RSL with standard macro INIT_DELAYED_WORK to increase readability. Signed-off-by:
-
Philipp Hortmann authored
Remove unused macro queue_delayed_work_rsl and queue_work_rsl to increase readability. Signed-off-by:
-
Philipp Hortmann authored
Replace macro skb_tail_pointer_rsl with function skb_tail_pointer to increase readablility. Signed-off-by:
-
Philipp Hortmann authored
Remove double defined constants. Signed-off-by:
-
Khadija Kamran authored
Splitting function header to multiple lines because of 80 characters per line limit, results in ending the function call line with '('. This leads to CHECK reported by checkpatch.pl Move the first parameter right after the '(' in the function call line. Align the rest of the parameters to the opening parenthesis. Signed-off-by: -
Khadija Kamran authored
Splitting function header to multiple lines because of 80 characters per line limit, results in ending the function call line with '('. This leads to CHECK reported by checkpatch.pl Move the function parameters right after the '(' in the function call line. Align the rest of the parameters to the opening parenthesis. Signed-off-by: -
Khadija Kamran authored
Splitting function header to multiple lines because of 80 characters per line limit, results in ending the function call line with '('. This leads to CHECK reported by checkpatch.pl Move the function parameters right after the '(' in the function call line. Signed-off-by: -
Khadija Kamran authored
Remove extra blank line reported by checkpatch script. Signed-off-by:
-
- Mar 22, 2023
-
-
Sumitra Sharma authored
Remove definition 'to_nvec_led' because it is only used once. Rewrite the code directly in the calling function 'nvec_led_brightness_set'. Signed-off-by:
Sumitra Sharma <sumitraartsy@gmail.com> Link: https://lore.kernel.org/r/20230322054051.GA150453@sumitra.com Signed-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/staging/rts5208/xd.c:34:19: error: unused function 'xd_check_err_code' [-Werror,-Wunused-function] static inline int xd_check_err_code(struct rtsx_chip *chip, u8 err_code) ^ This function is not used, so remove it. Signed-off-by: -
Menna Mahmoud authored
Convert `dvobj_to_dev` macro into a static inline function. it is not great to have macro that use `container_of` macro, because from looking at the definition one cannot tell what type it applies to. One can get the same benefit from an efficiency point of view by making an inline function. Suggested-by:
Julia Lawall <julia.lawall@inria.fr> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230319201134.253839-1-eng.mennamahmoud.mm@gmail.com Signed-off-by:
-
Menna Mahmoud authored
Convert `iface_to_hdm` macro into a static inline function. it is not great to have macro that use `container_of` macro, because from looking at the definition one cannot tell what type it applies to. One can get the same benefit from an efficiency point of view by making an inline function. Suggested-by:
-
Menna Mahmoud authored
Convert `to_hdm` macro into a static inline function. it is not great to have macro that use `container_of` macro, because from looking at the definition one cannot tell what type it applies to. One can get the same benefit from an efficiency point of view by making an inline function. Suggested-by:
-
Philipp Hortmann authored
Remove unused variable rtl819XAGCTAB_Array. Signed-off-by:
-
Khadija Kamran authored
Splitting function header to multiple lines because of 80 characters per line limit, results in ending the function call line with '('. This leads to CHECK reported by checkpatch.pl Move the first parameter right after the '(' in the function call line. Align the rest of the parameters to the opening parenthesis. Signed-off-by: -
Sumitra Sharma authored
The coding style used to limit lines to 80 characters, which led to splitting of these function headers into multiple lines and ends the first line with a '('. Such splits causes checks reported by the checkpatch. Place the function parameters of each function immediately after '(' in a single line to align the function headers. Signed-off-by:
-
- Mar 17, 2023
-
-
Sumitra Sharma authored
Since the coding style limited the code to 80 columns per line which caused splitting the function header into two lines resulted in the first line ending with a '('. This caused the checkpatch error. Place the function parameters immediately after '(' in a single line to align the function header. Signed-off-by: -
Khadija Kamran authored
Initialize the module parameters, read_timeout and write_timeout once in init(). Module parameters can only be set once and cannot be modified later, so we don't need to evaluate them again when passing the parameters to wait_event_interruptible_timeout(). Convert datatype of {read,write}_timeout from 'int' to 'long int' because implicit conversion of 'long int' to 'int' in statement '{read,write}_timeout = MAX_SCHEDULE_TIMEOUT' results in an overflow. Change format specifier for {read,write}_timeout from %i to %li. Reviewed-by:Fabio M. De Francesco <fmdefrancesco@gmail.com> Suggested-by:
-
Michael Straube authored
The function bb_power_save_mode_off() is not used anywhere, remove it. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20230317065041.16635-3-straube.linux@gmail.com Signed-off-by:
-
