- Feb 06, 2023
-
-
Arnd Bergmann authored
Merge tag 'ti-k3-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt TI K3 device tree updates for v6.3 New features: J784S4 SoC and EVM support AM68 and AM69 StarterKit, phyBOARD-Electra-AM642, Siemens IoT2050 M.2 AM62A7 SK additional peripherals AM62 SK USB support Non critical fixes AM62: McSPI Clock ID fixes MMC TAP value updates J7200: pinmux range update All: Cache DT node fixes Cleanups: Reorder dts Makefile entries alphabetically * tag 'ti-k3-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (25 commits) arm64: dts: ti: Makefile: Rearrange entries alphabetically arch: arm64: dts: Add support for AM69 Starter Kit dt-bindings: arm: ti: Add binding for AM69 Starter Kit arm64: dts: ti: iot2050: Add support for M.2 variant dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant arm64: dts: ti: iot2050: Add layout of OSPI flash arm64: dts: ti: k3-j7200: Fix wakeup pinmux range arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board arm64: dts: ti: Add initial support for AM68 SK System on Module dt-bindings: arm: ti: Add binding for AM68 SK arm64: dts: Update cache properties for ti arm64: dts: ti: Add support for phyBOARD-Electra-AM642 dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware arm64: dts: ti: k3-am62a7-sk: Enable USB1 node arm64: dts: ti: k3-am62a7-sk: Enable ethernet port arm64: dts: ti: k3-am62a-main: Add more peripheral nodes arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals arm64: dts: ti: Add support for J784S4 EVM board arm64: dts: ti: Add initial support for J784S4 SoC dt-bindings: pinctrl: k3: Introduce pinmux definitions for J784s4 ... Link: https://lore.kernel.org/r/642cf238-43e5-d6fa-68b5-a9dfbc0277bf@ti.com Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- Feb 03, 2023
-
-
Arnd Bergmann authored
Merge tag 'mvebu-dt64-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 6.3 (part 1) Do not use anymore "marvell,armada3710" compatible string for the Armada 3720 boards. * tag 'mvebu-dt64-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Fix compatible strings for Armada 3720 boards Link: https://lore.kernel.org/r/87zg9w9j6l.fsf@BL-laptop Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'mvebu-dt-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 6.3 (part 1) Fix errors reported by dtbs_check on dove boards * tag 'mvebu-dt-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: dove.dtsi: Move ethphy to fix schema error Link: https://lore.kernel.org/r/87357oaxs0.fsf@BL-laptop Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT for v6.3, round 1 Highlights: ---------- - MPU: - ST boards: - Add following peripherals support on stm32mp13: i2s, SAI, SPDIFRX, DFSDM, Timers - Add timers support on stm32mp135f-dk board. - Add decicated BSEC compatible on STM32MP13. - Rename sound card on STM32MP15 DKx. - Fix yaml validation issues. * tag 'stm32-dt-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: fix compatible for BSEC on STM32MP13 ARM: dts: stm32: Update part number NVMEM description on stm32mp131 ARM: dts: stm32: Use new media bus type macros ARM: dts: stm32: Fix User button on stm32mp135f-dk ARM: dts: stm32: add timers support on stm32mp135f-dk ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk ARM: dts: stm32: add timers support on stm32mp131 ARM: dts: stm32: add dfsdm node on stm32mp131 ARM: dts: stm32: add spdifrx node on stm32mp131 ARM: dts: stm32: add sai nodes on stm32mp131 ARM: dts: stm32: add i2s nodes on stm32mp131 ARM: dts: stm32: Remove the pins-are-numbered property ARM: dts: stm32: rename sound card on stm32mp15xx-dkx ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som Link: https://lore.kernel.org/r/3e815504-e85e-cbd3-6e6d-4e5a7aa7469a@foss.st.com Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Two new 32bit SoC were added, the rv1126 and rk3128. New boards are thr rk3128-eval-board, and a number of rv1126-based compute modules from Edgeble AI. Also included are some dt-binding improvements with relevant Acks from maintainers when the changes touch these areas. * tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: phy: rename phy-rockchip-inno-usb2.yaml dt-bindings: soc: rockchip: grf: add rockchip,rk3288-dp-phy.yaml dt-bindings: phy: rockchip: convert rockchip-dp-phy.txt to yaml ARM: dts: rockchip: Enable Ethernet on rv1126 Neu2-IO ARM: dts: rockchip: Add Ethernet GMAC node for RV1126 ARM: dts: rockchip: Add ethernet rgmiim1 pin-control for rv1126 dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6 ARM: dts: rockchip: add brcmf node to rk3066a-mk808 ARM: dts: rockchip: add space between label and nodename nfc pinctrl on rk3128 ARM: dts: rockchip: add rk3128-evb ARM: dts: rockchip: add rk3128 soc dtsi dt-bindings: arm: rockchip: Add Rockchip RK3128 Evaluation board ARM: dts: rockchip: Add Edgeble Neural Compute Module 2(Neu2) IO board ARM: dts: rockchip: Add Edgeble RV1126 Neural Compute Module 2(Neu2) dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2 dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd. ARM: dts: rockchip: Add Rockchip RV1126 SoC ARM: dts: rockchip: Add Rockchip RV1126 pinctrl dt-bindings: arm: rockchip: Add pmu compatible for rv1126 Link: https://lore.kernel.org/r/5651506.31r3eYUQgx@phil Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New SoC supported is the rk3588. New boards rk3588-evb1, EmbedFire Lubancat 1+2 (based on different SoCs), a number of Radxa boards (rock-5a and -5b, compute module 3, cm3i e25), OrangePi R1 plus and the Edgeble Neu6 SoM and baseboard. A number of improvements for the Odroid Go (and its clones) including touchscreen and display support, led and audio changes. As well as some improvements for the rk356x, better gpu thermal values for px30 and some minor improvement for rock3a, rock5a, rk3566-demo, roc-rk3399-pc and bi-r2pro. * tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits) arm64: dts: rockchip: Correct the model name for Radxa E25 arm64: dts: rockchip: Drop unneeded model for Radxa CM3i arm64: dts: rockchip: Add missing CM3i fallback compatible for Radxa E25 arm64: dts: rockchip: Fix compatible for Radxa CM3 arm64: dts: rockchip: rk3566: Enable WiFi, BT support for Radxa CM3 arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO arm64: dts: rockchip: add display to RG503 arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SBC boards arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM boards arm64: dts: rockchip: Add Radxa Compute Module 3 IO board arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3 dt-bindings: arm: rockchip: Add Radxa Compute Module 3 arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a arm64: dts: rockchip: add Hynitron cst340 for Anbernic 353 series arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM arm64: dts: rockchip: fix hdmi cec on rock-3a arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x ... Link: https://lore.kernel.org/r/6491956.DvuYhMxLoT@phil Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v6.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt7986: - add USB host support - add support for mmc, pcie - add support for Bananpi R3 mt8173: - switch to SMC watchdog for Acer Chromebook R13 - move panel under aux bus mt8183: - support detachable keyboards on kukui based Chromebooks - describe 13 MHz clock correctly - complete CPU cache information mt8186: - Add pm-domains, iommu, dsi - describe 13 MHz clock correctly - complete CPU cache information - add crypto support for the eMMC - add audio controler, DPI and ADSP mailbox support - describe CPUs as a single cluster mt8192: - describe 13 MHz clock correctly - complete CPU cache information - enable display regulators, backlight, internal display and audio on Acer Chromebook 514 - describe CPUs as a single cluster mt8195: - Add power domain to t-phy - describe 13 MHz clock correctly - complete CPU cache information - enable audio for Acer Chromebook Spin 513 - add ethernet support for the demo board - add JPG enconder and decoder device - describe CPUs as a single cluster Smaller changes for mt6795, mt7622, mt8516 and mt6358. * tag 'v6.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (58 commits) arm64: dts: mediatek: mt8516: Fix the watchdog node name arm64: dts: mediatek: mt7986: Fix watchdog compatible arm64: dts: mediatek: mt8195: Fix watchdog compatible arm64: dts: mediatek: mt8186: Fix watchdog compatible arm64: dts: mt8173-elm: Switch to SMC watchdog arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node arm64: dts: mt8192: Change idle states names to reflect actual function arm64: dts: mt8186: Change idle states names to reflect actual function arm64: dts: mt8195: Change idle states names to reflect actual function arm64: dts: mt8186: Fix CPU map for single-cluster SoC arm64: dts: mt8192: Fix CPU map for single-cluster SoC arm64: dts: mt8195: Fix CPU map for single-cluster SoC arm64: dts: mt8195: add jpeg decode device node arm64: dts: mt8195: add jpeg encode device node arm64: dts: mediatek: mt8183: drop double interrupts arm64: dts: mediatek: mt7622: drop serial clock-names arm64: dts: mt8195: Add efuse node to mt8195 arm64: dts: mt8183: jacuzzi: Move panel under aux-bus arm64: dts: mediatek: mt8173-elm: Move display to ps8640 auxiliary bus arm64: dts: mt8195: Add Ethernet controller ... Link: https://lore.kernel.org/r/2eefe6d4-6ca3-dc5f-6a04-f4f3c49692dd@gmail.com Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v6.2-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt Clean ups only: - deleting unsused pins-are-numbered property - not existing second IRQ * tag 'v6.2-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: ARM: dts: mediatek: Remove pins-are-numbered property arm: dts: mt7629: Remove extra interrupt from timer node Link: https://lore.kernel.org/r/17aee808-1f3f-fe75-68d4-adb71915e5cb@gmail.com Signed-off-by:
-
- Feb 02, 2023
-
-
Patrick Delaunay authored
Use the correct compatible for stm32mp13 support. The BSEC driver for STM32MP15x is not compatible with STM32MP13x. For example the proprietary's smc STM32_SMC_BSEC is not supported in STM32MP13x OP-TEE, it is replaced by SM32MP BSEC Pseudo Trusted Application in OP-TEE to access to the secured IP BSEC on STM32MP13X SoC. The correct compatible is already used in U-Boot and in upstream is in progress for OP-TEE device tree. As the SoC STM32MP13X is not yet official and it is not available outside STMicroelectronics, it is the good time to break the DTS compatibility and to correct the error done in the introduction of STM32MP131. Signed-off-by:
Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Patrick Delaunay authored
The STM32MP13x Device Part Number (also named RPN in reference manual) only uses the first 12 bits in OTP4, all the other bit are reserved and they can be different of zero; they must be masked in NVMEM result, so the number of bits must be defined in the nvmem cell description. Fixes: 1da8779c ("ARM: dts: stm32: add STM32MP13 SoCs support") Signed-off-by:
-
Johan Jonker authored
Rename phy-rockchip-inno-usb2.yaml to a more common format of rockchip,inno-usb2phy.yaml Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Acked-By:
Vinod Koul <vkoul@kernel.org> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/99794484-d67e-ee1f-4e76-200de20a879c@gmail.com Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Vignesh Raghavendra authored
Entries are first grouped as per SoC present on the board. Groups are sorted alphabetically. This makes it easy to know SoC to board mapping and also add new entries in alphabetical order. Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20230126071159.2337584-1-vigneshr@ti.com
-
Dasnavis Sabiya authored
AM69 Starter Kit is a single board designed for TI AM69 SOC that provides advanced system integration in automotive ADAS applications, autonomous mobile robot and edge AI applications. The SOC comprises of Cortex-A72s in dual clusters, lockstep capable dual Cortex-R5F MCUs, Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP) and multiple vision assist accelerators, Depth and Motion Processing Accelerators (DMPAC), Deep-learning Matrix Multiply Accelerator(MMA) and C7x floating point vector DSP AM69 SK supports the following interfaces: * 32 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x3 USB 3.0 Type-A ports * x1 USB 3.0 Type-C port * x1 UHS-1 capable micro-SD card slot * x4 MCAN instances * 32 GB eMMC Flash * 512 Mbit OSPI flash * x2 Display connectors * x1 PCIe M.2 M Key * x1 PCIe M.2 E Key * x1 4L PCIe Card Slot * x3 CSI2 Camera interface * 40-pin Raspberry Pi header Add initial support for the AM69 SK board. Design Files: https://www.ti.com/lit/zip/SPRR466 TRM: https://www.ti.com/lit/zip/spruj52 Signed-off-by:Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by:
-
Dasnavis Sabiya authored
AM69 Starter Kit is a single board designed for TI AM69 SoC. The AM69 SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration in automotive ADAS applications, autonomous mobile robot and edge AI applications. Add DT binding for AM69 Starter Kit. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
- Feb 01, 2023
-
-
https://github.com/Xilinx/linux-xlnxArnd Bergmann authored
ARM: Zynq DT changes for v6.3 - Fix node names to be aligned with dt schema - Describe qspi controller - Use xlnx prefix for ethernet IP * tag 'zynq-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Use recommended dma-controller name instead of dmac ARM: dts: zynq: Add xlnx prefix to GEM compatible string ARM: zynq: Comment interrupt names IRQs for pl330 ARM: dts: zynq: add QSPI controller node Link: https://lore.kernel.org/r/850bb18f-ca22-f3d7-71a7-f367bfef4ccc@monstr.eu Signed-off-by:
-
https://github.com/Xilinx/linux-xlnxArnd Bergmann authored
arm64: ZynqMP SOC changes for v6.3 - Fix node names to be aligned with dt schema - Rename DT overlay files to dtso - Add snps,resume-hs-terminations to usb nodes - Describe gpio-modepin node - Use xlnx prefix for ethernet IP * tag 'zynqmp-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Add xlnx prefix to GEM compatible string arm64: dts: zynqmp: Remove clock-names from GEM in zynqmp-clk-ccf.dtsi arm64: dts: zynqmp: Add mode-pin GPIO controller DT node arm64: zynqmp: Enable hs termination flag for USB dwc3 controller arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtso arm64: xilinx: Fix opp-table-cpu arm64: dts: xilinx: align LED node names with dtschema Link: https://lore.kernel.org/r/89d82a7e-6b42-97ce-2912-aa7dec965ff2@monstr.eu Signed-off-by:
-
Allen-KH Cheng authored
The proper name is 'watchdog', not 'toprgu' and remove the unused label. Signed-off-by:
Allen-KH Cheng <allen-kh.cheng@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20221108033209.22751-5-allen-kh.cheng@mediatek.com Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com>
-
Allen-KH Cheng authored
MT7986's watchdog embeds a reset controller and needs only the mediatek,mt7986-wdt compatible string as the MT6589 one is there for watchdogs that don't have any reset controller capability. Fixes: 50137c15 ("arm64: dts: mediatek: add basic mt7986 support") Signed-off-by:
-
AngeloGioacchino Del Regno authored
MT8195's watchdog embeds a reset controller and needs only the mediatek,mt8195-wdt compatible string as the MT6589 one is there for watchdogs that don't have any reset controller capability. Fixes: 37f25828 ("arm64: dts: Add mediatek SoC mt8195 and evaluation board") Signed-off-by:
-
AngeloGioacchino Del Regno authored
MT8186's watchdog embeds a reset controller and needs only the mediatek,mt8186-wdt compatible string as the MT6589 one is there for watchdogs that don't have any reset controller capability. Fixes: 2e78620b ("arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile") Signed-off-by:
-
Pin-yen Lin authored
Switch to SMC watchdog because we need direct control of HW watchdog registers from kernel. The corresponding firmware was uploaded in https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3405 . Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Reviewed-by:
-
AngeloGioacchino Del Regno authored
Specify #pwm-cells on pwm@11006000 to make it actually usable. Fixes: ae457b76 ("arm64: dts: mt7622: add SoC and peripheral related device nodes") Signed-off-by:
-
Pali Rohár authored
All Armada 3720 boards have Armada 3720 processor which is of Armada 3700 family and do not have Armada 3710 processor. So none of them should have compatible string for Armada 3710 processor. Fix compatible string for all these boards by removing wrong processor string "marvell,armada3710" and adding family string "marvell,armada3700" as the last one. (Note that this is same way how are defined Armada 3710 DTS files). [gclement: fix conflict for v6.2] Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com>
-
- Jan 31, 2023
-
-
Michał Grzelak authored
Running 'make dtbs_check' with schema in net/marvell,orion-mdio.yaml gives following warnings: mdio-bus@72004: Unevaluated properties are not allowed ('ethernet-phy' was unexpected) arch/arm/boot/dts/dove-cubox.dtb arch/arm/boot/dts/dove-cubox-es.dtb arch/arm/boot/dts/dove-d2plug.dtb arch/arm/boot/dts/dove-d2plug.dtb arch/arm/boot/dts/dove-dove-db.dtb arch/arm/boot/dts/dove-d3plug.dtb arch/arm/boot/dts/dove-sbc-a510.dtb As every subnode of mdio is expected to have an @X, ethernet-phy subnode in dove.dtsi doesn't have one. Fix these errors by moving ethernet-phy into relevant .dts files with correct @<reg address>. Signed-off-by:Michał Grzelak <mig@semihalf.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
AngeloGioacchino Del Regno authored
The names of the idle states are misleading being this a single cluster SoC, a cluster-sleep idle state is impossible! After some research in ATF, it emerged that the cpu-sleep state is in reality putting CPUs in retention state, while the cluster-sleep one is turning off the CPUs. Summarizing renaming: - cpu-sleep -> cpu-retention - cluster-sleep -> cpu-off Signed-off-by:
-
AngeloGioacchino Del Regno authored
The names of the idle states are misleading being this a single cluster SoC, a cluster-off idle state is impossible! After some research in ATF, it emerged that the cpu-off state is in reality putting CPUs in retention state, while the cluster-off one is turning off the CPUs. Summarizing renaming: - cpu-off -> cpu-retention - cluster-off -> cpu-off Signed-off-by:
-
AngeloGioacchino Del Regno authored
The names of the idle states are misleading being this a single cluster SoC, a cluster-off idle state is impossible! After some research in ATF, it emerged that the cpu-off state is in reality putting CPUs in retention state, while the cluster-off one is turning off the CPUs. Summarizing renaming: - cpu-off -> cpu-retention - cluster-off -> cpu-off Signed-off-by:
-
AngeloGioacchino Del Regno authored
MT8186 features the ARM DynamIQ technology and combines both two Cortex-A76 (big) and six Cortex-A55 (LITTLE) CPUs in one cluster: fix the CPU map to reflect that. Signed-off-by:
-
AngeloGioacchino Del Regno authored
MT8192 features the ARM DynamIQ technology and combines both four Cortex-A76 (big) and four Cortex-A55 (LITTLE) CPUs in one cluster: fix the CPU map to reflect that. Signed-off-by:
-
AngeloGioacchino Del Regno authored
MT8195 features the ARM DynamIQ technology and combines both four Cortex-A78 (big) and four Cortex-A55 (LITTLE) CPUs in one cluster: fix the CPU map to reflect that. Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'amlogic-arm-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM mach-meson changes for v6.3: - align OPP table names with DT schema - meson8/8b: Add more L2 (PL310) cache properties - align LED node names with dtschema * tag 'amlogic-arm-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: meson8: align OPP table names with DT schema ARM: dts: meson8b: Add more L2 (PL310) cache properties ARM: dts: meson8: Add more L2 (PL310) cache properties ARM: dts: meson: align LED node names with dtschema Link: https://lore.kernel.org/r/61700737-c226-1c07-fba7-6dca896fdab4@linaro.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM64 DT changes for v6.3: - Merge of immutable bindings branch with Reset & power domain binding - New boards: - Odroid-N2L (Smaller version of Odroid-N2+) - BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi) - Radxa Zero2 (New version of Radza Zero with A311D SoC) - Add DT node for the VIPNano-QI on the A311D - DT bindings fixups covering all SoC families - MAC address nodes - ethernet PHY node name - scpi & child node names - SD/SDIO node name - USB supply name - invalid clock-names - rng node name - rtc node name - ETH phy mux node name - button & adc keys node name - leds node names - RK818 pmic properties - remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1 - Fix WiFi/Bt definition around P212 & Khadas VIM1 - Add audio node to P212 - Fix FAN trip definition to Odroid-HC4 - Fix gpio-fan gpios definition - Permit Radxa Zero OTG on USB1 - Fix VDDIO_C enable gpio by using OPEN DRAIN flag * tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (43 commits) arm64: dts: meson: add support for Radxa Zero2 dt-bindings: arm: amlogic: add support for Radxa Zero2 arm64: dts: meson: add support for BananaPi M2-Pro dt-bindings: arm: amlogic: add support for BananaPi M2-Pro arm64: dts: meson: bananapi-m5: convert dts to dtsi arm64: dts: meson: bananapi-m5: remove redundant status from sound node arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN arm64: dts: meson: radxa-zero: allow usb otg mode arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L arm64: dts: meson-g12b: move common node into new odroid.dtsi dt-bindings: arm: amlogic: document Odroid-N2L arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip arm64: dts: meson: add audio playback to S905X-P212 dts arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1 arm64: dts: meson: move pwm_ef node in P212 dtsi arm64: dts: meson: add Broadcom WiFi to P212 dtsi arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name ... Link: https://lore.kernel.org/r/c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-dt64-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree change for 6.3: - New board support: i.MX8MP Beacon Kit, Debix Model A Board, Verdin Yavia boards. - Add Flexcan and ADC support for i.MX93. - A series from Krzysztof Kozlowski to align LED node names with dtschema and use generic node name for rave-sp. - Move PCIe controller clock setup from board dts to SoC dtsi. - Add clock-cells to i.MX8MP hsio-blk-ctrl device. - Add TMU phandle to calibration data in OCOTP for i.MX8M. - Improve bluetooth UART on DH electronics i.MX8M Plus DHCOM. - Drop sd-vsel-gpios from i.MX8M Verdin SoM and DHCOM SoM. - A series from Peng Fan to improve iomuxc-gpr device for i.MX8M. - Declare IOMMU cache-coherent page table walk feature for LS1028A and LS1088A. - A few small corrections and random updates. * tag 'imx-dt64-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits) arm64: ls1046ardb: Use in-band-status for SFP module arm64: dts: imx8mp-verdin: Add yavia carrier board arm64: dts: imx8mm-verdin: Add yavia carrier board arm64: dts: imx8q: use generic node name for rave-sp arm64: dts: imx8mp-verdin-dev: Do not include dahlia dtsi arm64: dts: imx8mm-verdin-dev: Do not include dahlia dtsi arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus DHCOM SoM arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus Verdin SoM arm64: dts: imx8mm: Drop sd-vsel-gpios from i.MX8M Mini Verdin SoM arm64: dts: imx8mp: Improve bluetooth UART on DH electronics i.MX8M Plus DHCOM arm64: dts: freescale: Introduce imx8mp-beacon-kit arm64: dts: imx8mm-evk: use correct gpio-expander compatible arm64: dts: imx93: add ADC support arm64: dts: imx8mp: Reorder clock to match fsl,imx6q-pcie.yaml arm64: dts: imx8mq: Deduplicate PCIe clock-names property arm64: dts: imx8mm: Deduplicate PCIe clock-names property arm64: dts: verdin-imx8mp: unify gpio-key node name arm64: dts: ls1028a: sl28: get MAC addresses from VPD arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL arm64: dts: imx8mp: Add LCDIF2 & LDB nodes ... Link: https://lore.kernel.org/r/20230130023947.11780-5-shawnguo@kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxArnd Bergmann authored
i.MX arm device tree change for 6.3: - New board support: SK-iMX53, DHCOM i.MX6ULL based boards. - Increase MMC maximum frequency for i.MXRT1050. - A series from Krzysztof Kozlowski to align LED node names with dtschema, and use use generic node name for rave-sp device. - Use new media bus type macros for i.MX device trees. - A series from Marcel Ziswiler to improve gpio-key for Colibri and Apalis device trees. - A series from Marek Vasut to drop interrupt-names from dma-apb device. - A series from Philippe Schenker to disable USB over-current for Colibri and Apalis boards. - A few other small corrections and random changes. * tag 'imx-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits) ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board ARM: dts: imx7s: correct iomuxc gpr mux controller cells ARM: dts: imx: use generic node name for rave-sp ARM: dts: ls1021a: Disable CAN nodes by default ARM: dts: apalis/colibri-imx6/6ull/7: proper gpio-key node names ARM: dts: colibri-imx6ull: improve wake-up with gpio key ARM: dts: colibri-imx6: improve wake-up with gpio key ARM: dts: imx: e70k02: Add touchscreen ARM: dts: vfxxx: Swap SAI DMA order ARM: dts: freescale: Use new media bus type macros ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatible ARM: dts: imx: Add support for SK-iMX53 board ARM: dts: imx7s: Drop dma-apb interrupt-names ARM: dts: imx6ul: Drop dma-apb interrupt-names ARM: dts: imx6sx: Drop dma-apb interrupt-names ARM: dts: imx6qdl: Drop dma-apb interrupt-names ARM: dts: mxs: Drop dma-apb interrupt-names ARM: dts: imx6qdl: use MAC-address from nvmem ... Link: https://lore.kernel.org/r/20230130023947.11780-4-shawnguo@kernel.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings for 6.3: - New board compatibles: Beacon EmbeddedWorks i.MX8M Plus kit, DHCOM PDK2, PicoITX and DRC02, Enumerate Debix, Starterkit SK-iMX53, verdin yavia carrier-board. - Add vendor prefix for Polyhex Technology Co. - A series from Krzysztof Kozlowski to fix up fsl,imx-gpc bindings. - Add clock cells for imx8mp-hsio-blk-ctrl bindings. - A series from Marek Vasut to shuffle i.MX8MM board entries. - A couple changes from Stefan Wahren to update compatibles for i.MX28 based boards. * tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add verdin yavia carrier-board dt-bindings: arm: fsl: Add PDK2, PicoITX and DRC02 boards for the DHCOM i.MX6ULL SoM dt-bindings: arm: Document the rest of i.MX28 based boards dt-bindings: arm: fsl: Fix bindings for APF28Dev board dt-bindings: power: fsl,imx-gpc: document interrupt-controller dt-bindings: power: fsl,imx-gpc: correct compatibles dt-bindings: power: fsl,imx-gpc: document fsl,imx6ul-gpc compatible dt-bindings: arm: Add Beacon EmbeddedWorks i.MX8M Plus kit dt-bindings: arm: Move i.MX8MM Cloos PHG Board to TQM entry dt-bindings: arm: Split i.MX8M Plus DHCOM based boards dt-bindings: arm: Split i.MX8M Mini NITROGEN SoM based boards dt-bindings: arm: Move MX8Menlo board to i.MX8M Mini Toradex Verdin SoM entry dt-bindings: soc: imx: add IOMUXC GPR support dt-bindings: arm: fsl: Add the Starterkit SK-iMX53 board dt-bindings: vendor-prefixes: add Startkit dt-bindings: soc: imx8mp-hsio-blk-ctrl: add clock cells dt-bindings: arm: fsl: Enumerate Debix Model A Board dt-bindings: vendor-prefixes: Add Polyhex Technology Co. Link: https://lore.kernel.org/r/20230130023947.11780-3-shawnguo@kernel.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'dt-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into arm/dt Minor improvements in ARM DTS for v6.3, part two Align UART node names and OPP table names with bindings (alpine, arm boards, axm55xx, berlin, cx92755, dm814x, moxart, mstar, stih418). * tag 'dt-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: berlin: align UART node name with bindings ARM: dts: stih418: align OPP table names with DT schema ARM: dts: dm814x: align UART node name with bindings ARM: dts: moxart: align UART node name with bindings ARM: dts: axm55xx: align UART node name with bindings ARM: dts: alpine: align UART node name with bindings ARM: dts: arm: align UART node name with bindings ARM: dts: cx92755: align UART node name with bindings ARM: dts: mstar: align UART node name with bindings Link: https://lore.kernel.org/r/20230129144525.5802-2-krzysztof.kozlowski@linaro.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'dt64-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into arm/dt Minor improvements in ARM64 DTS for v6.3, part two 1. Drop deprecated "device_type" property from serial nodes (apm, amazon). 2. Align UART node names and OPP table names with bindings (hisilicon, realtek, synaptics). 3. Use "okay" for status, as expected by Devicetree specification and dtschema. * tag 'dt64-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: arm64: dts: amd: use "okay" for status arm64: dts: apm: use "okay" for status arm64: dts: microchip: use "okay" for status arm64: dts: synaptics: align UART node name with bindings arm64: dts: hisilicon: align UART node name with bindings arm64: dts: realtek: align UART node name with bindings arm64: dts: amazon: drop deprecated serial device_type arm64: dts: apm: drop deprecated serial device_type Link: https://lore.kernel.org/r/20230129144525.5802-1-krzysztof.kozlowski@linaro.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'samsung-dt64-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v6.3, part two Big cleanup and rework towards achieving zero-warning of dtbs_check and dtc W=1: - drop or correct incorrect properties in several boards, - add dummy regulator supplies when necessary to fullfil bindings requirements, - use lowercase hex, - move non-MMIO exynos-bus nodes out of soc node, - add unit address to USB DWC3 nodes. * tag 'samsung-dt64-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7 arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos5433 arm64: dts: exynos: move exynos-bus nodes out of soc in Exynos5433 arm64: dts: exynos: use lowercase hex addresses arm64: dts: exynos: correct wlf,micd-dbtime on TM2 arm64: dts: exynos: add interrupt-controller to WM5110 on TM2 arm64: dts: exynos: add VPH_PWR regulator on TM2 arm64: dts: exynos: correct Bluetooth LED triger on E850-96 arm64: dts: exynos: add ADC supply on Exynos7 Espresso arm64: dts: exynos: disable non-working GPU on Exynos7 Espresso arm64: dts: exynos: drop unsupported UFS properties in ExynosAutov9 SADK Link: https://lore.kernel.org/r/20230129143944.5104-2-krzysztof.kozlowski@linaro.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'samsung-dt-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v6.3 1. Big cleanup and rework towards achieving zero-warning of dtbs_check and dtc W=1: - align node names with the bindings, - drop or correct incorrect properties in several boards, - correct HDMI bridge ports nodes on Exynos4412 Midas, - add dummy regulator supplies when necessary to fullfil bindings requirements, - use lowercase hex, - move non-MMIO exynos-bus nodes out of soc node, - add unit address to USB DWC3 nodes. 2. Correct Exynos5420 MIPI DSI and phy compatibles. 3. Correct Exynos4210 and Exynos4412 HDMI phy compatibles. 4. Add Samsung Galaxy S5 (SM-G900H) board. * tag 'samsung-dt-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (27 commits) ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos54xx ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos5250 ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412 ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4210 ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos3250 ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420 ARM: dts: exynos: use lowercase hex addresses ARM: dts: exynos: use generic node names for phy ARM: dts: exynos: correct HDMI phy compatible in Exynos4 ARM: dts: exynos: Add Samsung Galaxy S5 (SM-G900H) board dt-bindings: arm: samsung: Add compatible for Samsung Galaxy S5 (SM-G900H) ARM: dts: exynos: Use Exynos5422 compatible for the DSI controller ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy ARM: dts: exynos: correct HSI2C properties in Exynos5410 Odroid XU ARM: dts: exynos: correct HS200 property in Exynos5260 ARM: dts: exynos: correct SATA clocks in Exynos5250 ARM: dts: exynos: align HSOTG/USB node names ARM: dts: exynos: add backlight supply in P4 Note ARM: dts: exynos: add panel supply in Tiny4412 ARM: dts: exynos: add ports in HDMI bridge in Exynos4412 Midas ... Link: https://lore.kernel.org/r/20230129143944.5104-1-krzysztof.kozlowski@linaro.org Signed-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM64 SoCs Device Tree updates for 6.3, please pull the following: - Krzysztof aligns the SMMMU Device Tree nodes to use the desired regular expression matched by the dtschema and he also removes the deprecated "device_type" property for serial node(s) * tag 'arm-soc/for-6.3/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: drop deprecated serial device_type arm64: dts: broadcom: align SMMU node names with DT schema Link: https://lore.kernel.org/r/20230128193834.1628831-1-f.fainelli@gmail.com Signed-off-by:
-
