- Jan 15, 2018
-
-
Noralf Trønnes authored
It's better to leave power handling and controller init to the modesetting machinery using the simple pipe .enable and .disable callbacks. Remove unused mipi_dbi_pipe_enable(). Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-6-noralf@tronnes.org
-
Noralf Trønnes authored
Split out common poweron-reset functionality. Signed-off-by:
-
Noralf Trønnes authored
Add and use a function for enabling, flushing and turning on backlight. Signed-off-by:
-
Noralf Trønnes authored
No need for a public header file for the command macros. Just include the necessary ones in the driver. Also use the MIPI_DCS_PIXEL_FMT_16BIT macro. Signed-off-by:
-
Noralf Trønnes authored
Include linux headers before drm headers as it's commonly done. Signed-off-by:
-
- Jan 12, 2018
-
-
Linus Walleij authored
If the bridge has a too strict setup time for the incoming signals, we may not be fast enough and then we need to compensate by outputting the signal on the inverse clock edge so it is for sure stable when the bridge samples it. Since bridges in difference to panels does not expose their connectors, make the connector optional in the display setup code. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-4-linus.walleij@linaro.org
-
Linus Walleij authored
This extends the dumb VGA DAC bridge to handle the THS8134A and THS8134B VGA DACs in addition to those already handled. We assign the proper timing data to the pointer inside the bridge struct so display controllers that need to align their timings to the bridge can pick it up and work from there. Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by:
-
Linus Walleij authored
After some discussion and failed patch sets trying to convey the right timing information between the display engine and a bridge using the connector, I try instead to use an optional timing information container in the bridge itself, so that display engines can retrieve it from any bridge and use it to determine how to drive outputs. Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings for the Texas Instruments THS8134, THS8134A and THS8134B VGA DACs by extending and renaming the existing bindings for THS8135. These DACs are used for the VGA outputs on the ARM reference designs such as Integrator, Versatile and RealView. Cc: devicetree@vger.kernel.org Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Noralf Trønnes authored
Remove a couple of trailing spaces. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
- Jan 10, 2018
-
-
Maarten Lankhorst authored
This reverts commit a10195bb. This commit needs some more thought, and is currently crashing kms_flip tests. Until we figure out what's going wrong it's better to revert, and also next time apply it to drm-misc-fixes. Testcase: kms_flip Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104566 References: https://patchwork.freedesktop.org/series/36185/ References: https://patchwork.freedesktop.org/series/36250/ Reported-by:
Marta Löfstedt <marta.lofstedt@intel.com> Acked-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Samuel Li authored
Signed-off-by:
Samuel Li <Samuel.Li@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1515100334-6845-1-git-send-email-Samuel.Li@amd.com
-
Leo (Sunpeng) Li authored
During a non-blocking commit, it is possible to return before the commit_tail work is queued (-ERESTARTSYS, for example). Since a reference on the crtc commit object is obtained for the pending vblank event when preparing the commit, the above situation will leave us with an extra reference. Therefore, if the commit_tail worker has not consumed the event at the end of a commit, release it's reference. Signed-off-by:
Leo (Sunpeng) Li <sunpeng.li@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
- Jan 09, 2018
-
-
Brian Norris authored
Bridge drivers/helpers shouldn't be clobbering the drvdata, since a parent driver might need to own this. Instead, let's return our 'dw_mipi_dsi' object and have callers pass that back to us for removal. Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171128010538.119114-1-briannorris@chromium.org
-
Philippe CORNU authored
Add the 8-bit clut mode support at crtc level. Useful for low memory footprint user interfaces but also for 8-bit old games (including color shifting visual effects). Tested with fbdev FBIOPUTCMAP & drm DRM_IOCTL_MODE_SETGAMMA ioctls. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1509016666-18927-1-git-send-email-philippe.cornu@st.com
-
Sylwester Nawrocki authored
This patch removes an unreachable code found by the SVACE static analysis: UNREACHABLE_CODE: This statement in the source code might be unreachable during program execution. [unreachable] unreachable at drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:787 retval != 0 is always false because at this program point the variable retval is always equal to 0 at drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:786 Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
- Jan 05, 2018
-
-
Maxime Ripard authored
A significant number of panels need to power up a regulator in order to operate properly. Add support for the power-supply property to enable and disable such a regulator whenever needed. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Reviewed-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/0c0819bdf88fa948188df95e57a10820a8a4548d.1513854122.git-series.maxime.ripard@free-electrons.com
-
Maxime Ripard authored
The power-supply property is used by a vast majority of panels, including panel-simple. Let's document it as a common property Acked-by:
-
Maxime Ripard authored
Add support for the A83T display pipeline. Reviewed-by:
-
Maxime Ripard authored
The TCON supports the LVDS interface to output to a panel or a bridge. Let's add support for it. Reviewed-by:
-
Maxime Ripard authored
The various outputs the TCON can provide have different constraints on the dotclock divider. Let's make them configurable by the various mode_set functions. Reviewed-by:
-
Maxime Ripard authored
It seems like the mixer can only run properly when clocked at 150MHz. In order to have something more robust than simply a fire-and-forget assigned-clocks-rate, let's put that in the code. Reviewed-by:
-
Maxime Ripard authored
The A83T has two video pipelines in parallel that looks quite similar to the other SoCs. The video planes are handled through a controller called the mixer, and the video signal is then passed to the timing controller (TCON). And while there is two instances of the mixers and TCONs, they have a significant number of differences. The TCONs are quite easy to deal with, one is supposed to generate TV (in the broader term, so including things like HDMI) signals, the other one LCD (so RGB, LVDS, DSI) signals. And while they are called TCON0 and TCON1 in the A83t datasheet, newer SoCs call them TCON-TV and TCON-LCD, which seems more appropriate. However, the mixers differ mostly by their capabilities, with some features being available only in the first one, or the number of planes they expose, but also through their register layout. And while the capabilities could be represented as properties, the register layout differences would need to express all the registers offsets as properties, which is usually quite bad. Especially since documentation on that hardware block is close to non-existent and we don't even have the list of all those registers in the first place. So let's call them mixer 0 and 1 in our compatibles, even though the name is pretty bad... At the moment, we only have tested the code on a board that has a single display output, so we're leaving the tcon-tv and mixer1 out. Reviewed-by:
-
Maxime Ripard authored
Some clocks and resets supposed to drive the LVDS logic in the display engine have been overlooked when the driver was first introduced. Add those additional resources to the binding, and we'll deal with the ABI stability in the code. Reviewed-by:
-
- Jan 03, 2018
-
-
David Lechner authored
This adds a new driver for Sitronix ST7735R display panels. This has been tested using an Adafruit 1.8" TFT. Signed-off-by:
-
David Lechner authored
This adds a new device tree binding for Sitronix ST7735R display panels, such as the Adafruit 1.8" TFT. Signed-off-by:
-
David Lechner authored
This adds a vendor prefix "jianda" for Jiandangjing Technology Co., Ltd. Signed-off-by:
-
David Lechner authored
This updates the compatible string for a no-name LCD panel to "vot,v220hf01a-t", "ilitek,ili9225". The original bindings were the generic "ilitek,ili9225-2.2in-176x220" because I could not find a datasheet. However, after some more research, I finally found one, so the actual vendor and model name are now known. This previous bindings have not made it to the mainline kernel yet, so this is not breaking backwards compatibility. Signed-off-by:
-
David Lechner authored
This updates the compatible string for a no-name LCD panel to "vot,v220hf01a-t", "ilitek,ili9225". The original bindings [1] were the generic "ilitek,ili9225-2.2in-176x220" because I could not find a datasheet. However, after some more research, I finally found one, so the actual vendor and model name are now known. This previous bindings have not made it to the mainline kernel yet, so this is not breaking backwards compatibility. This is also following the precedence of the ILI9322 bindings [2] by using the pattern "vendor,specific-system-config", "vendor,ip-part"; [1]: https://patchwork.ozlabs.org/patch/839352/ [2]: https://patchwork.ozlabs.org/patch/843576/ Signed-off-by:
-
David Lechner authored
This adds a vendor prefix "vot" for Vision Optical Technology Co., Ltd. They make LCD displays. Signed-off-by:
-
- Dec 24, 2017
-
-
David Lechner authored
drm_panel_orientation_quirks.c introduced in commit 404d1a3e ("drm: Add panel orientation quirks, v6.") taints the kernel when compiled as a module. Fix this by adding MODULE_LICENSE(). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- Dec 22, 2017
-
-
Linus Walleij authored
This adds support for the Ilitek ILI9322 QVGA (320x240) TFT panel driver. This panel driver supports serial or parallel RGB or YUV input and also ITU-T BT.656 input streams. The controller is combined with a physical panel and configured through the device tree. Cc: David Lechner <david@lechnology.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings for the Ilitek ILI9322 320x240 TFT panel driver. Cc: David Lechner <david@lechnology.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: devicetree@vger.kernel.org Reviewed-by:
-
- Dec 20, 2017
-
-
Maarten Lankhorst authored
This is is very useful to finding sources of leaked framebufers. The fbcon fb is annotated with [fbcon], to give it a better name than kworker. Signed-off-by:
-
Noralf Trønnes authored
Add helper for initializing fbdev deferred I/O. The cleanup could have happened in drm_fb_helper_fini(), but that would have required me to set fb_info->fbdefio to NULL in a couple of drivers before they call _fini() to avoid double defio cleanup. The problem is that one of those is vboxvideo which lives in Greg's staging tree. So I put the cleanup in drm_fb_helper_fbdev_teardown(), not perfect but not that bad either. Signed-off-by:
-
Noralf Trønnes authored
Promote new helpers for dealing with fbdev emulation. Signed-off-by:
-
Noralf Trønnes authored
Add entry for conversion of drivers to new helpers. Signed-off-by:
-
Noralf Trønnes authored
Add helpers to setup and teardown fbdev emulation. Signed-off-by:
-
Noralf Trønnes authored
Set dev->fb_helper even when fbdev emulation is compiled out, so drivers can use it to free the structure. Clear it for consistency. Fixes: 29ad20b2 ("drm: Add drm_device->fb_helper pointer") Signed-off-by:
-
- Dec 19, 2017
-
-
Fabio Estevam authored
devm_ioremap_resource() already checks if the resource is NULL, so remove the unnecessary platform_get_resource() error check. Cc: Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Acked-by:
-
