- Apr 25, 2020
-
-
Jason Yan authored
Fix the following coccicheck warning: drivers/scsi/bfa/bfa_fcs_rport.c:2452:2-3: Unneeded semicolon drivers/scsi/bfa/bfa_fcs_rport.c:1578:3-4: Unneeded semicolon Link: https://lore.kernel.org/r/20200421033957.27783-1-yanaijie@huawei.com Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/bfa/bfa_svc.c: In function 'uf_recv': drivers/scsi/bfa/bfa_svc.c:5520:17: warning: variable 'fchs' set but not used [-Wunused-but-set-variable] struct fchs_s *fchs; ^ Link: https://lore.kernel.org/r/20200418071057.96699-1-yuehaibing@huawei.com Signed-off-by:YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Jason Yan authored
This function does not need a return value since no callers depend on it. Make it return void. This also fixes the coccicheck warning: drivers/scsi/snic/snic_ctl.c:163:5-8: Unneeded variable: "ret". Return "0" on line 228 Link: https://lore.kernel.org/r/20200418070615.11603-1-yanaijie@huawei.com Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/scsi/mpt3sas/mpt3sas_base.c:4906:3-19: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/20200418095850.34883-1-yanaijie@huawei.com Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/scsi/ipr.c:9533:2-18: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/20200418095903.35118-1-yanaijie@huawei.com Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/scsi/bfa/bfa_fcs_lport.c:4361:3-4: Unneeded semicolon Link: https://lore.kernel.org/r/20200418070553.11262-1-yanaijie@huawei.com Reported-by:
-
Wu Bo authored
Replace dma_pool_malloc with dma_pool_zalloc to make the code more concise in pmcraid_allocate_control_blocks() function. Link: https://lore.kernel.org/r/1587197241-274646-1-git-send-email-wubo40@huawei.com Signed-off-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
-
Maurizio Lombardi authored
This patch removes the iscsi_data_count structure and the iscsit_do_rx_data() function because they are used only by rx_data() Link: https://lore.kernel.org/r/20200424113913.17237-1-mlombard@redhat.com Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
Ming Lei authored
scsi_host_block() calls scsi_internal_device_block() for each scsi_device and scsi_internal_device_block() calls blk_mq_quiesce_queue() for each LUN. Since synchronize_rcu() is called from blk_mq_quiesce_queue(), this can cause substantial slowdowns on systems with many LUNs. Use scsi_internal_device_block_nowait() to implement scsi_host_block() so it is sufficient to run synchronize_rcu() once. This is safe since SCSI does not set the BLK_MQ_F_BLOCKING flag. [mkp: commit desc and comment tweaks] Link: https://lore.kernel.org/r/20200423020713.332743-1-ming.lei@redhat.com Cc: Steffen Maier <maier@linux.ibm.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dexuan Cui <decui@microsoft.com> Cc: Hannes Reinecke <hare@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Jason Yan authored
The '!=' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/scsi/BusLogic.c:2240:46-51: WARNING: conversion to bool not needed here Link: https://lore.kernel.org/r/20200421034120.28433-1-yanaijie@huawei.com Acked-by:
Khalid Aziz <khalid@gonehiking.org> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/scsi/megaraid/megaraid_sas_fusion.c:4242:6-16: WARNING: Assignment of 0/1 to bool variable drivers/scsi/megaraid/megaraid_sas_fusion.c:4786:1-29: WARNING: Assignment of 0/1 to bool variable drivers/scsi/megaraid/megaraid_sas_fusion.c:4791:1-29: WARNING: Assignment of 0/1 to bool variable drivers/scsi/megaraid/megaraid_sas_fusion.c:4716:1-29: WARNING: Assignment of 0/1 to bool variable drivers/scsi/megaraid/megaraid_sas_fusion.c:4721:1-29: WARNING: Assignment of 0/1 to bool variable Link: https://lore.kernel.org/r/20200421034111.28353-1-yanaijie@huawei.com Acked-by:
Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by:
-
Suganath Prabu authored
Update mpt3sas driver version from 33.100.00.00 to 33.101.00.00. Link: https://lore.kernel.org/r/1587626596-1044-6-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by:
Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Suganath Prabu authored
For INVADER_SERIES, each set of 8 reply queues (0 - 7, 8 - 15,..), and for VENTURA_SERIES, each set of 16 reply queues (0 - 15, 16 - 31,..) need to be within the same 4 GB boundary. Driver uses limitation of VENTURA_SERIES to manage INVADER_SERIES as well. The driver is allocating the DMA able memory for RDPQs accordingly. 1) At driver load, set DMA mask to 64 and allocate memory for RDPQs 2) Check if allocated resources for RDPQ are in the same 4GB range 3) If #2 is true, continue with 64 bit DMA and go to #6 4) If #2 is false, then free all the resources from #1 5) Set DMA mask to 32 and allocate RDPQs 6) Proceed with driver loading and other allocations Link: https://lore.kernel.org/r/1587626596-1044-5-git-send-email-suganath-prabu.subramani@broadcom.com Reviewed-by:
-
Suganath Prabu authored
For readability separate out RDPQ allocations to new function base_alloc_rdpq_dma_pool(). Link: https://lore.kernel.org/r/1587626596-1044-4-git-send-email-suganath-prabu.subramani@broadcom.com Reviewed-by:
-
Suganath Prabu authored
Rename is_MSB_are_same() to mpt3sas_check_same_4gb_region() for better readability. Link: https://lore.kernel.org/r/1587626596-1044-3-git-send-email-suganath-prabu.subramani@broadcom.com Reviewed-by:
-
Christoph Hellwig authored
The DMA layer does not allow changing the DMA coherent mask after there are outstanding allocations. Link: https://lore.kernel.org/r/1587626596-1044-2-git-send-email-suganath-prabu.subramani@broadcom.com Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports the following warning: warning: context imbalance in bnx2fc_abts_cleanup() - unexpected unlock The root cause is the missing annotation at bnx2fc_abts_cleanup(). Add the missing __must_hold(&tgt->tgt_lock) annotation. Link: https://lore.kernel.org/r/20200411001933.10072-8-jbi.octave@gmail.com Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Alex Dewar authored
There are a number of places in the aic7xxx driver where a NULL check is performed before a kfree(). However, kfree() already performs NULL checks so this is unnecessary. Remove the checks. Issue identified with Coccinelle. Link: https://lore.kernel.org/r/20200403164712.49579-1-alex.dewar@gmx.co.uk Signed-off-by:
Alex Dewar <alex.dewar@gmx.co.uk> Signed-off-by:
-
Alex Dewar authored
There are a couple of places where kzalloc() could be used directly instead of calling kmalloc() then memset(). Replace them. Link: https://lore.kernel.org/r/20200403163611.46756-1-alex.dewar@gmx.co.uk Signed-off-by:
-
Xu Wang authored
In do_abort_rpl_rss, the null check of 'clk' is not needed. Link: https://lore.kernel.org/r/20200402110832.12712-1-vulab@iscas.ac.cn Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Arun Easi authored
Today, upon an MPI failure AEN, on top of collecting an MPI dump, a regular firmware dump is also taken and then chip reset. This is disruptive to IOs and not required. Make the firmware dump collection, followed by chip reset, optional (not done by default). Firmware dump buffer and MPI dump buffer are independent of each other with this change and each can have dump that was taken at two different times for two different issues. The MPI dump is saved in a separate buffer and is retrieved differently from firmware dump. To collect full dump on MPI failure AEN, a module parameter is introduced: ql2xfulldump_on_mpifail (default: 0) Link: https://lore.kernel.org/r/20200331104015.24868-2-njavali@marvell.com Reported-by:kbuild test robot <lkp@intel.com> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
- Apr 22, 2020
-
-
James Smart authored
During code reviews several instances of duplicate module unloading checks were found. Remove the duplicate checks. Link: https://lore.kernel.org/r/20200421203354.49420-1-jsmart2021@gmail.com Reviewed-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/scsi/mpt3sas/mpt3sas_base.c:416:6-14: WARNING: Assignment of 0/1 to bool variable drivers/scsi/mpt3sas/mpt3sas_base.c:485:2-10: WARNING: Assignment of 0/1 to bool variable Link: https://lore.kernel.org/r/20200421034101.28273-1-yanaijie@huawei.com Acked-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/scsi/fcoe/fcoe.c:1918:3-4: Unneeded semicolon drivers/scsi/fcoe/fcoe.c:1930:3-4: Unneeded semicolon Link: https://lore.kernel.org/r/20200421034008.27865-1-yanaijie@huawei.com Reviewed-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/scsi/ufs/ufs-qcom.c:575:5-8: Unneeded variable: "ret". Return "0" on line 590 Link: https://lore.kernel.org/r/20200418070625.11756-1-yanaijie@huawei.com Reported-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Jason Yan authored
Also remove a strange '^L' after this function. Fix the following coccicheck warning: drivers/scsi/st.c:1460:5-11: Unneeded variable: "result". Return "0" on line 1473 Link: https://lore.kernel.org/r/20200418070605.11450-1-yanaijie@huawei.com Reported-by:
Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
- Apr 18, 2020
-
-
Saurav Kashyap authored
An update to pf params can change the devinfo. Get updated device information. [mkp: updated error message spotted by Sergei Shtylyov] Link: https://lore.kernel.org/r/20200416084314.18851-10-skashyap@marvell.com Signed-off-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Chad Dupuis authored
The MFW may make a call to qed and then to qedf for protocol statistics while the function is still probing. If this happens it's possible that some members of the struct qedf_ctx may not be fully initialized which can result in a NULL pointer dereference or general protection fault. To prevent this, add a new flag call QEDF_PROBING and set it when the __qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data() function we can check if the function is still probing and return immediantely before any uninitialized structures can be touched. Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.com Signed-off-by:
Chad Dupuis <cdupuis@marvell.com> Signed-off-by:
-
Chad Dupuis authored
Implement recovery handler to be used by QED to signal the need for recovery to come out of an error condition like ramrod struck and firmware context reset. Link: https://lore.kernel.org/r/20200416084314.18851-8-skashyap@marvell.com Signed-off-by:
-
Saurav Kashyap authored
Add support for the common qed bw_update callback to qedf. This function is called whenever there is a reported change in the bandwidth and updates corresponding values in sysfs. Link: https://lore.kernel.org/r/20200416084314.18851-7-skashyap@marvell.com Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Management firmware (MFW) sends a notification whenever there is a change in the bandwidth values. Add driver support for sending this notification to the upper layer drivers (e.g., qedf). Link: https://lore.kernel.org/r/20200416084314.18851-6-skashyap@marvell.com Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
-
Javed Hasan authored
Handle scope and qualifier on SAM_STAT_TASK_SET_FULL or SAM_STAT_BUSY [mkp: added braces to fix sparse complaint] Link: https://lore.kernel.org/r/20200416084314.18851-5-skashyap@marvell.com Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
-
Javed Hasan authored
Retry delay timestamp is updated in queuecommand as well as in qedf_scsi_completion routine. Protect it using lock. Link: https://lore.kernel.org/r/20200416084314.18851-4-skashyap@marvell.com Signed-off-by:
-
Javed Hasan authored
Max time to hold the IO in case of SAM_STAT_TASK_SET_FULL or SAM_STAT_BUSY. Link: https://lore.kernel.org/r/20200416084314.18851-3-skashyap@marvell.com Signed-off-by:
-
Saurav Kashyap authored
If a port is brought down for an extended period of time, the fipvlan counter gets exhausted and the driver will fall back to default VLAN 1002 and call fcoe_ctlr_link_up to log in. However, the switch will discard the FLOGI attempt because the VLAN is now different. Keep track of the number of FLOGI attempts and if a threshold of QEDF_FLOGI_RETRY_CNT is exceeded, perform a context soft reset. Link: https://lore.kernel.org/r/20200416084314.18851-2-skashyap@marvell.com Signed-off-by:
-
Jason Yan authored
This symbol has no users so remove it. Link: https://lore.kernel.org/r/20200415085053.7633-1-yanaijie@huawei.com Signed-off-by:
-
Jason Yan authored
Fix the following sparse warning: drivers/scsi/mvsas/mv_init.c:28:25: warning: symbol 'mvst_host_attrs' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415085044.7460-1-yanaijie@huawei.com Reported-by:
-
Jason Yan authored
Fix the following sparse warning: drivers/scsi/qedi/qedi_main.c:44:6: warning: symbol 'qedi_ll2_buf_size' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415085029.7170-1-yanaijie@huawei.com Reported-by:
-
Asutosh Das authored
During suspend, if the link is put to off, it would require a full initialization during resume. This patch resets and restores both the host and the card during initialization, otherwise host-only reset and restore would fail occasionally. Link: https://lore.kernel.org/r/1586844892-22720-1-git-send-email-cang@codeaurora.org Reviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Acked-by:
Stanley Chu <stanley.chu@mediatek.com> Acked-by:
Avri Altman <Avri.Altman@wdc.com> Signed-off-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
Jason Yan authored
Fix the following sparse warning: drivers/scsi/fnic/vnic_wq.c:28:5: warning: symbol 'vnic_wq_get_ctrl' was not declared. Should it be static? drivers/scsi/fnic/vnic_wq.c:40:5: warning: symbol 'vnic_wq_alloc_ring' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415093809.9365-3-yanaijie@huawei.com Reported-by:
-
