- Jun 09, 2009
-
-
James Smart authored
Miscellaneous Changes: - Convert from SLI2_ACTIVE flag to more correct SLI_ACTIVE (generic) flag - Reposition log verbose messaging definitions - Update naming for vpi object name from vport slang name - Handle deferred error attention condition - Add 10G link support - Small bug fixup Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Smart authored
Update of copyrights on modified files Signed-off-by:
-
James Smart authored
SLI4 supports both FC and FCOE, with some extended topology objects. This patch adss support for the objects, and updates the disovery engines for their use. Signed-off-by:
-
James Smart authored
The mailbox commands themselves are the same, or very similar to their SLI3 counterparts. This patch genericizes mailbox command handling and adds support for the new SLI4 mailbox queue. Signed-off-by:
-
James Smart authored
Adds support for the new queues in the SLI-4 interface. There are : - Work Queues - host-to-adapter for fast-path traffic - Mailbox Queues - host-to-adapter for control (slow-path) - Buffer Queues - host-to-adapter for posting buffers for async receive - Completion Queues - adapter-to-host for posting async events, completions for fast or slow patch work, receipt of async receive traffic - Event Queues - tied to MSI-X vectors, binds completion queues with interrupts These patches add the all the support code to tie into command submission and response paths, updates the interrupt handling, etc. Signed-off-by: -
James Smart authored
Adds new hardware and interface definitions. Adds new interface routines - utilizing the reorganized layout of the driver. Adds SLI-4 specific functions for attachment, initialization, teardown, etc. Signed-off-by:
-
James Smart authored
Preps the organization of the driver so that the bottom half, which interacts with the hardware, can share common code sequences for attachment, detachment, initialization, teardown, etc with new hardware. For very common code sections, which become specific to the interface type, the driver uses an indirect function call. The function is set at initialization. For less common sections, such as initialization, the driver looks at the interface type and calls the routines relative to the interface. Signed-off-by:
-
- May 24, 2009
-
-
Abhijeet Joglekar authored
This allows fnic to configure number of retries for lport and rport separately. Signed-off-by:
Abhijeet Joglekar <abjoglek@cisco.com> Acked-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Eric Moore authored
Bump driver version. Signed-off-by:
Eric Moore <eric.moore@lsi.com> Signed-off-by:
-
Eric Moore authored
This fix's is for all local function so their name has the "_" preceeding the module name, then function name. Most the code is already is using this naming convention. Signed-off-by:
-
Eric Moore authored
This patch will find an active mid for a query_task request via the ioctl path. This code is already there for task_abort, so this patch combining code using the same fuction _ctl_set_task_mid(), previously _ctl_do_task_abort(). Signed-off-by:
-
Eric Moore authored
Adding new eh_target_reset_handler for target reset. Change the eh_device_reset_handler so its sending MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, instead of MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET. Add new function _scsih_scsi_lookup_find_by_lun as a sanity check to insure I_T_L commands are completed upon completing lun reset. Signed-off-by:
-
Eric Moore authored
This add support for type 1 and 3 DIF support per the Oracle API. Signed-off-by:
-
Christof Schmitt authored
Keep the information about the device and model id in zfcp_ccw. This requires an additional helper function to check for the privileged cfdc subchannel, but it allows the removal of the redundant defines from the zfcp_def header file. Reviewed-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
-
Swen Schillig authored
If the destination ID (D_ID) of a remote storage port changed, e.g. re-plugged cable on the switch in a different switch port, the port was never (re-)attached within Linux. This patch fixes the broken mapping between the WWPN and the D_ID. Signed-off-by:
-
Martin Petermann authored
In rare cases, open port request might timeout, erp calls zfcp_port_put, port gets dequeued. Now, the late returning (or dismissed) fsf-port-open calls the fsf_port_open_handler that tries to reference the port data structure leading to a kernel oops. Signed-off-by:
Martin Petermann <martin.petermann@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Add comments where there is a deliberate fall through in switch/case statements. This makes some code checkers happy and makes it clear that there is no missing break statement. Reviewed-by:
-
Christof Schmitt authored
enum dma_data_direction only has the 4 values DMA_BIDIRECTIONAL, DMA_TO_DEVICE, DMA_FROM_DEVICE and DMA_NONE. No need to have the default case. While changing this, setup sbtype in one place to make sparse happy. The default value of retval is already -EIO, so remove the additional assignment for these two cases. Reviewed-by:
-
Christof Schmitt authored
zfcp did always set the queue_depth for SCSI devices to 32, not allowing to change this. Introduce a kernel parameter zfcp.queue_depth and the change_queue_depth callback to allow changing the queue_depth when it is required. Reviewed-by:
-
Christof Schmitt authored
Update the newly introduced message for the boxed status to conform to match the style of s390 and zfcp messages. Reviewed-by:
-
Christof Schmitt authored
The zfcp traces used the fsf_req address in place of the req_id. Change this to save the correct req_id. Reviewed-by:
-
Andy Yan authored
Signed-off-by:
Ying Chu <jasonchu@marvell.com> Signed-off-by:
Andy Yan <ayan@marvell.com> Signed-off-by:
Ke Wei <kewei@marvell.com> Signed-off-by:
-
Mike Christie authored
This patch just adds some debug statements for the abort and completion paths. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Mike Christie authored
If a task did not complete normally due to a TMF, libiscsi will now complete the task with the state ISCSI_TASK_ABRT_TMF. Drivers like bnx2i that need to free resources if a command did not complete normally can then check the task state. If a driver does not need to send a special command if we have dropped the session then they can check for ISCSI_TASK_ABRT_SESS_RECOV. Signed-off-by:
-
Mike Christie authored
Instead of having libiscsi check if the offload bit is set, have it check if the lld created a work queue. I think this is more clear. Signed-off-by:
-
Mike Christie authored
If the session is failed, but we have not yet fully transitioned to the recovery stage we were still queueuing IO. The idea is that for some failures we can recvover at the command level and still continue to execute other IO. Well, we never have added the recovery within a command code, so queueing up IO here just creates the possibility that it might time time out so this just has us requeue the IO the scsi layer for now. Signed-off-by:
-
Mike Christie authored
bnx2i needs to send a hardware specific cleanup command if a command has not completed normally (iscsi/scsi response from target), and the session is still ok (this is the case when we send a TMF to stop the command). At this time it will need to drop the session lock. The problem with the current code is that fail_all_commands assumes we will hold the lock the entire time, so it uses list_for_each_entry_safe. If while bnx2i drops the session lock multiple cmds complete then list_for_each_entry_safe will not handle this correctly. This patch removes the running lists and just has us loop over the cmds array (in later patches we will then replace that array with a block tag map at the session level). It also fixes up the completion path so that if the TMF code and the normal recv path were completing the same command then they both do not try to do release the refcount taken when the task is queued. Signed-off-by:
-
Mike Christie authored
If we have not got any pdus for recv_timeout seconds, then we will send a iscsi ping/nop to make sure the target is still around. The problem is if this is a slow link, and the ping got queued after the data for a data_out (read), then the transport code could think the ping has failed when it is just slowly making its way through the network. This patch has us check if we are making progress while the nop is outstanding. If we are still reading in data, then we do not fail the session at that time. Signed-off-by:
-
Mike Christie authored
Everytime we read in a pdu libiscsi will update a tracking field. It uses this to decide when to check if the transport might be bad. If we have not got data in recv_timeout seconds then we will send a iscsi ping/nop. If we are on a slow link then it could take a while to read in all the data for a data_in. In that case we might send a ping/nop when we do not need to or we might drop a session thinking it is bad when the lower layer is making forward progress on it. This patch has libiscsi_tcp update the recv tracking for each skb (basically network packet from our point of view) instead of the entire iscsi pdu+data, so we account for these cases where data is coming in slowly. Signed-off-by:
-
Mike Christie authored
If we are responding to a nop from the target by sending our nop, and the session is getting torn down, then iscsi_start_session_recovery could set the conn stop bits while the recv path is sending the nop response and we will hit the bug ons in __iscsi_conn_send_pdu. This has us check the state in __iscsi_conn_send_pdu and fail all incoming mgmt IO if we are not logged in and if the pdu is not login related. It also changes the ordering of the setting of conn stop state bits so they are set after the session state is set (both are set under the session lock). Signed-off-by:
-
Mike Christie authored
This has iscsi_data_in_rsp call iscsi_update_cmdsn when a pdu is completed like is done for other pdu's that are don. For libiscsi_tcp, this means that it calls iscsi_update_cmdsn when it is handling the pdu internally to only transfer data, but if there is status then it does not need to call it since the completion handling will do it. Signed-off-by:
-
Mike Christie authored
bnx2i needs to be able to look up mgmt task like login and nop, because it does some processing of them on the completion path. This exports iscsi_itt_to_task so it can look up the task. Signed-off-by:
-
Mike Christie authored
If we could not allocate the initiator name or some other id like the hwaddress or netdev, then userspace could deal with the failure by just running in a dregraded mode. Now we want to be able to switch values for the params and we want some feedback, so this patch will check if a string like the initiatorname could not be allocated and return an error. Signed-off-by:
-
Mike Christie authored
bnx2i does not have one. It currently preallocates the bdt when the session is setup. We probably want to change that to a dma pool, then allocate from the pool in the alloc pdu. Until then check if there is a alloc pdu callout. Signed-off-by:
-
Mike Christie authored
When we create the tcp/ip connection by calling ep_connect, we currently just go by the routing table info. I think there are two problems with this. 1. Some drivers do not have access to a routing table. Some drivers like qla4xxx do not even know about other ports. 2. If you have two initiator ports on the same subnet, the user may have set things up so that session1 was supposed to be run through port1. and session2 was supposed to be run through port2. It looks like we could end with both sessions going through one of the ports. Fixes for cxgb3i from Karen Xie. Signed-off-by:
-
Zhenwen Xu authored
drivers/scsi/NCR_D700.c: In function `NCR_D700_probe': drivers/scsi/NCR_D700.c:322: warning: passing argument 2 of `request_irq' from incompatible pointer type drivers/scsi/NCR_D700.c:322: warning: passing argument 2 of `request_irq' from incompatible pointer type drivers/scsi/NCR_D700.c:322: warning: passing argument 2 of `request_irq' from incompatible pointer type Signed-off-by:
Zhenwen Xu <helight.xu@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andy Yan authored
Using sticky field to improve retrieve performance by eliminating some lookups in . Remove some spurious casts. Signed-off-by:
-
Andy Yan authored
Utilize DECLARE_BITMAP to define the tags array. Signed-off-by:
-
Andy Yan authored
Null pointer check to avoid corruption. Signed-off-by:
-
Andy Yan authored
TMF task should be issued with Interrupt Disabled, or Deadlock may take place. Clean-up unused parameters and conditonal lock. Signed-off-by:
-
