The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
cc: Lars Poeschel <poeschel@lemonage.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
cc: Patil, Rachna <rachna@ti.com>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
cc: Milo(Woogyom) Kim <milo.kim@ti.com>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

The original info_mask is going away in favour of the broken out versions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This simplifies the code, removes an extensive layer of 'helper' macros
and gives us twice as much room to play with in these masks before we
have any need to be clever.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

This patch adds New driver to support:
1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
   and future SoCs from Samsung
2. Add ADC driver under iio/adc framework
3. Also adds the Documentation for device tree bindings

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use the new spi_sync_transfer() helper function instead of open-coding it.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch adds support for Analog Devices AD7923 ADC in the IIO Subsystem.

Signed-off-by: Patrick Vasseur <patrick.vasseur@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Provide bindings and parse OF data during initialization.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The adt7410 hwmon driver is feature wise more or less on par with the IIO
driver. So we can finally remove the IIO driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

`labpc_common_detach()` calls `comedi_pci_disable()` unconditionally.
That's okay for PCI devices and harmless for ISA devices (as the
`hw_dev` member will be NULL so `comedi_to_pci_dev()` will return NULL
and `comedi_pci_disable()` checks for that), but it is disastrous for
PCMCIA devices.  Those are managed by the "ni_labpc_cs" module but it
calls this `labpc_common_detach()` and the `hw_dev` member will be
pointing to the `struct device` embedded in a `struct pcmcia_device` in
that case.  That's enough to confuse `comedi_pci_disable()` into
thinking it's a valid PCI device to be disabled.

Use the private board information (`thisboard`) to make sure it is a PCI
device before calling `comedi_pci_disable()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some PCI drivers use the "spare" `iobase` member of `struct
comedi_device` as a flag to indicate that the call to
`comedi_pci_enable()` was successful.  This is no longer necessary now
that `comedi_pci_enable()` and `comedi_pci_disable()` use the
`ioenabled` member of `struct comedi_device` themselves to keep track of
what needs to be done.

Remove the unnecessary assignments to the `iobase` member in the
relevant drivers.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add 1-bit bit-field member `ioenabled` of type `bool` to `struct
comedi_device`.  Use this to keep track of whether a PCI device and its
BARs have been successfully enabled by `comedi_pci_enable()`.  This
avoids overloading the meaning of the `iobase` member which is used by
several drivers to hold the base port I/O address of a board's "main"
registers.  Other drivers using MMIO use `iobase` as a flag to indicate
that the preceding call to `comedi_pci_enable()` was successful.  They
no longer need to do that.

The name `ioenabled` is intended to be PCI-agnostic so it can be used
for similar purposes by non-PCI drivers.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the `in_request_module` member of `struct comedi_device` to a
1-bit bit-field of type `bool` and move it into a suitable hole in the
data type to save a few bytes.  Change the assigned values to `true` and
`false`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the `attached` member of `struct comedi_device` to a 1-bit
bit-field of type `bool`.  Change assigned values to `true` and `false`
and replace or remove comparison operations with simple boolean tests.

We'll put some extra bit-fields in the gap later to save space.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Florent Boudet reports success using a NI PXI-6624 board with a
trivially modified version of the "ni_660x" driver (addition to the PCI
device ID table and comedi board table).  He did this with the
out-of-tree Comedi drivers at www.comedi.org, but it applies equally to
the in-tree "staging" drivers.

He reports the PXI-6624 is basically the same as the PXI-6602, but with
isolated channels and external voltage source.

Add support for NI PXI-6224 to the "ni_660x" driver.

(Maybe the driver should be renamed to "ni_66xx"?)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Florent Boudet <flboudet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert to preferred block comment style.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Back in the old days (before "staging") when Comedi only supported
manual configuration of devices, the "adv_pci_dio" driver supported both
PCI-1753 ("pci1753") and PCI-1753E ("pci1753e").  In actual fact,
"pci1753e" is just a PCI-1753 connected by a ribbon cable to a PCI-1753E
expansion card, which is plugged into a PCI slot but is not a PCI device
itself.  Now that the "adv_pci_dio" driver only supports automatic
configuration of devices and the main "comedi" module no longer allows
auto-configuration to be disabled, a PCI-1753 with a PCI-1753E expansion
card is always treated as an unexpanded PCI-1753 ("pci1753") and there
is no way to override it.  (Recently, an undefined macro
`USE_PCI1753E_BOARDINFO` was used to make the driver switch to
supporting "pci1753e" instead of "pci1753", but this is less than
ideal.)

Advantech has their own Linux (non-Comedi) driver for the PCI-1753 which
detects whether the PCI-1753E expansion card is connected to the
PCI-1753 by fiddling with a register at offset 53 from the main
registers base.

Use Advantech's test in our "adv_pci_dio" driver.  If the board appears
to be a PCI-1753 ("pci1753"), check if the expansion card appears to be
present, and if so, treat the device as a PCI-1753 plus PCI-1753E
expansion card ("pci1753e").

Also, get rid of `enum dio_boardid` (`BOARD_...` enum values) which was
added recently and just use the older `TYPE_...` enum values from `enum
hw_cards_id` instead as the mapping is now 1-to-1.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a build error due to a missing ';' at the end of a line.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Geert Uytterhoeven <geert.uytterhoeven@gmail.com>
Cc: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dwc2_hcd_release() calls dwc2_hcd_free() which frees ->core_params
and sets it to NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'lli_array_ptr' etc. are malloced in sep_prepare_input_dma_table() and should
be freed before leaving from the error handling case, otherwise it will cause
memory leak.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>