The hints regarding the mute-LED must be evaluated during the codec
parsing.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

BIOS on some HP laptops don't set the speaker-pins as fixed but expose
as jacks, and this confuses the driver as if these pins are
jack-detectable.  As a result, the machine doesn't get sounds from
speakers because the driver prepares the power-map update via jack
unsol events which never come up in reality.  The bug was introduced
in some time in 3.2 for enabling the power-mapping feature.

This patch fixes the problem by replacing the check of the persistent
power-map bits with a proper is_jack_detectable() call.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43240



Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

It turned out that the FLOAT format on CS4206 results in simple
noises, which implies that this is no right format as is.
Since CS4206 is the only codec supporting the float, let's disable it
until we find the correct format.

Reported-and-tested-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Never trust datasheet...

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The amp and caps hashes aren't protected properly for concurrent
accesses.  Protect them via a new mutex now.

But it can't be so simple as originally thought: since the update of a
hash table entry itself might trigger the power-up sequence which
again accesses the hash table, we can't cover the whole function
simply via mutex.  Thus the update part has to be split from the mutex
and revalidated.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the missing mutex protection or move into the protected part for
SPDIF access codes for codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

These are almost compatible with the older Conexant codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The controller is compatible with HD-audio 1.0a with some specific
restrictions.
- The BDLE entries can't be over 4k boundary
- No position-buffer and no MSI

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Build fix for SH in 3.4

An API update which wasn't sufficiently thorough in updating the tree...

Fix a recent compilation breakage, caused by a change in SH clock API.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Check the power_transition up/down state instead of boolean bit, so
that the power-up sequence can cancel the pending power-down work
properly.  Also, by moving cancel_delayed_work_sync() before the
actual power-up sequence, make sure that the delayed power-down is
completed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Since the recent commit, the resume procedure is always performed at
the resume time.  This makes the pre_resume hack for VREF mute LED on
some HP laptops superfluous.  As this is the only user of pre_resume
(and there is no user of post_suspend) ops, let's kill them again.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

When an IRQ for some reason gets lost, we wait up to a second using
udelay, which is CPU intensive. This patch improves the situation by
waiting about 30 ms in the CPU intensive mode, then stepping down to
using msleep(2) instead. In essence, we trade some granularity in
exchange for less CPU consumption when the waiting time is a bit longer.

As a result, PulseAudio should no longer be killed by the kernel
for taking up to much RT-prio CPU time. At least not for *this* reason.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Tested-by: Arun Raghavan <arun.raghavan@collabora.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just code shuffles.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Move the fixup helper functions in patch_realtek.c to hda_auto_parser.c
so that they can be used in other codec drivers like patch_conexant.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

To avoid some races.  Still not perfect, but now a bit safer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some power-saving states have been left unchanged in
snd_hda_codec_reset(), and this is a potential danger because the
function may be called in various situations including the continuous
operation after that call.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

This is a fix for the problem in commit 785f857d

, the pop noise
issue on some machines with ALC269.  The problem was the uninitialized
state after the resume due to the delayed resume of the codec chips.
In that commit, we tried to fix by forcibly putting the codec to D3 at
suspend.  But, this still also leaves the uninitialized state after
resume, and it _might_ be still problematic with some BIOS.  Since the
commit turned out to regress another issues, we reverted it in the
end.

Now, in this fix, try to fix by turning on the codec immediately at
the resume path.  We need to take care of the power-saving in this
case.  When the device is woken up at the power-saved state, it should
go power-saving again after the resume.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The work struct must be initialized before the possible call in the
destructor.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just a clean up by calling the same helper function.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit 785f857d

.

The commit causes a problem with the wrong D3 state after suspend
because the call of hda_set_power_state() involves with the power-up
sequence, which changes the power_count, and this confuses the resume
sequence that checks the power_count as well.

Originally, this go-to-D3 sequence should be a simple task without the
power-up sequence.  But, it'd need some proper sanity checks in the
case of power-saved state, so it's not too easy to write now in the
3.4-rc cycle.

In short, the safest option now is to revert this affecting commit.

Of course, we need to clean up and robustify the power-saving code
better for 3.5 kernel.

Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The call for alc_auto_parse_customize_define() must be done after the
fixup pre-probe initialization.  Otherwise SKU_IGNORE fixup won't work
properly (e.g. HP RP5800 with ALC662 codec).

Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd_hdsp uses its own ioctls to acquire config- and status information.
Expose the corresponding ioctl handler via ioctl_compat, so that 32bit applications can use it on 64bit kernels.

Signed-off-by: Andre Schramm <andre.schramm@iosono-sound.com>
Reviewed-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Reported-by: Philipp Matthias Hahn <pmhahn@pmhahn.de>
Cc: <stable@kernel.org> [v3.3+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Acer Aspire 5739G requires the same fix-up for 4930G to support the
surround / bass speakers.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43180



Signed-off-by: Takashi Iwai <tiwai@suse.de>

This assertion seems to imply that chip->dsp_code_to_load is a pointer.
It's actually an integer handle on the actual firmware, and 0 has no
special meaning.

The assertion prevents initialisation of a Darla20 card, but would also
affect other models. It seems it was introduced in commit dd7b254d

.

ALSA sound/pci/echoaudio/echoaudio.c:2061 Echoaudio driver starting...
ALSA sound/pci/echoaudio/echoaudio.c:1969 chip=ebe4e000
ALSA sound/pci/echoaudio/echoaudio.c:2007 pci=ed568000 irq=19 subdev=0010 Init hardware...
ALSA sound/pci/echoaudio/darla20_dsp.c:36 init_hw() - Darla20
------------[ cut here ]------------
WARNING: at sound/pci/echoaudio/echoaudio_dsp.c:478 init_hw+0x1d1/0x86c [snd_darla20]()
Hardware name: Dell DM051
BUG? (!chip->dsp_code_to_load || !chip->comm_page)

Signed-off-by: Mark Hills <mark@pogo.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Updates for 3.4

Nothing terribly exciting here, a bunch of small and simple fixes
scattered around the place.

Signed-off-by: Oleg Matcovschi <oleg.matcovschi@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>

As s3c2412-i2s is using the s3c_i2sv2 it should call the more specialised
s3c_i2sv2_register_dai instead of simply calling snd_soc_register_dai.

Without this call the snd_soc_dai_ops structure isn't initialised correctly.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The core allocates the live copies, we shouldn't try to duplicate it and
were buggy trying to do so as we were using uninitialised data for the
control data.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

* commit f9dfbf91

 "ASoC: tlv320aic23: convert to soc-cache" leads to
a bug preventing resumeof the codec as regmap expects a 9 bits data
register but 0xFFFF is passed in tlv320aic23_set_bias_level and this
values gets cached preventing any write to the TLV320AIC23_PWR
register as the final value produced by regmap is (register << 9) | value

* this patch solves the problem by only working on the 9 bits the
register contains.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Commit 980b0bc6

 ("ASoC: blackfin: Use dai_fmt") converted the blackfin ASoC
machine drivers to use the dai_links dai_fmt field to setup their DAI format.
For the bf5xx-ssm2602 the commit removed the manual call to snd_soc_dai_set_fmt,
but missed to set the dai_links dai_fmt field.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Add description for 'reg' field.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

While we need to clean up unused single ended line outputs we don't want
to do this if the outputs are in differential mode.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ASoC: updates for 3.4

Slightly larger than normal - the DAPM fix is a "this should always have
worked" type of thing which is very clear and should have no impact on
systems that don't need it.  The WM8994 fix is driver specific but
pretty important for that driver.