- Dec 11, 2010
-
-
Taku Izumi authored
This patch provides the debugfs facility to the bonding driver. The "bonding" directory is created in the debugfs root and directories of each bonding interface (like bond0, bond1...) are created in that. # mount -t debugfs none /sys/kernel/debug # ls /sys/kernel/debug/bonding bond0 bond1 Signed-off-by:
Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
Signed-off-by:
Roopa Prabhu <roprabhu@cisco.com> Signed-off-by:
David Wang <dwang2@cisco.com> Signed-off-by:
Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
Dan Carpenter authored
We should be returning -EFAULT here. Mostly this patch is to silence a smatch warning. The upper levels of this driver turn all non-zero return values from isar_load_firmware() into 1. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Jon Mason authored
Update vxge driver version to 2.5.1 Signed-off-by:
Jon Mason <jon.mason@exar.com> Signed-off-by:
Ram Vepa <ram.vepa@exar.com> Signed-off-by:
-
Jon Mason authored
Configure the workload clock register and TIM register for independent interrupt moderation based on the individual vpath utilization instead of common link utilization. This greatly improves latency. Signed-off-by:
-
Jon Mason authored
When hot-unplugging a vxge adapter while running, the driver's remove routine prints warning and then stalls the calling thread. This is due to vxge_remove calling vxge_device_unregister to unregister the netdev before calling flush_scheduled_work clear any pending work. Swapping the order of these two functions resolves the issue. Signed-off-by:
-
Jon Mason authored
Use a workqueue to handle the device reset during a transmit timeout, as there can be a deadlock during bringup. Also, set the netif carrier off before the watchdog reset is started to prevent the timeout from reoccurring while still processing the first. Signed-off-by:
-
Jon Mason authored
Only BAR0 is ever accessed, thus making the calls to pci_request_regions overkill. Change calls of pci_request_regions to pci_request_region to reduce the size of the mapped area. Signed-off-by:
-
Jon Mason authored
Calling pci_disable_sriov when unloading a SR-IOV physical function driver from a host when a guest is using a virtual function from that device can cause a host crash or VM crash. The crash is caused by the virtual config space no longer being present when PF is removed (due to the pci_disable_sriov). This can be avoided by not calling pci_disable_sriov to disable the PCI space when shutting down the PF. Each function in the X3100 operates independently and in this case will operate properly in the absence of the PF. Also, added improved logic in the detection of SR-IOV initialization. Signed-off-by:
-
Jon Mason authored
Move function locations to remove the need for internal declarations and other misc clean-ups. Signed-off-by:
Arpit Patel <arpit.patel@exar.com> Signed-off-by:
-
Herbert Xu authored
The nf_pre_routing functions in bridging have collected two distinct ways of returning NF_DROP over the years, inline and via goto. There is no reason for preferring either one. So this patch arbitrarily picks the inline variant and converts the all the gotos. Also removes a redundant comment. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Changli Gao authored
Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
-
Ben Hutchings authored
Various drivers are using implementations of ethtool_ops::get_link that are equivalent to the default ethtool_op_get_link(). Change them to use that instead. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Ben Hutchings authored
While an interface is down, many implementations of ethtool_ops::get_link, including the default, ethtool_op_get_link(), will report the last link state seen while the interface was up. In general the current physical link state is not available if the interface is down. Define ETHTOOL_GLINK to reflect whether the interface *and* any physical port have a working link, and consistently return 0 when the interface is down. Signed-off-by:
-
Roopa Prabhu authored
This patch adds support in enic 802.1Qbh port profile provisioning code to use the mac address set by IFLA_VF_MAC. For now we handle this mac as a special case for a VM mac address sent to us by libvirt. The VM mac address is sent to the switch along with the rest of the port profile provisioning data. This patch also adds calls to register and deregister the mac address during port profile association/deassociation. Signed-off-by:
-
Roopa Prabhu authored
This patch implements the ndo_set_vf_mac netdev operation for enic dynamic devices. It treats the mac address set by IFLA_VF_MAC as a special case to use it in the port profile provisioning data. Signed-off-by:
-
Roopa Prabhu authored
Add ndo_set_rx_mode support to register unicast and multicast address filters for enic devices Signed-off-by:
Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by:
-
Junchang Wang authored
We know for sure pktgen is going to write skb->data right after *_alloc_skb, causing unnecessary cache misses. Idea is to add a prefetchw() call to prefetch the first cache line indicated by skb->data. On systems with Adjacent Cache Line Prefetch, it's probably two cache lines are prefetched. With this patch, pktgen on Intel SR1625 server with two E5530 quad-core processors and a single ixgbe-based NIC went from 8.63Mpps to 9.03Mpps, with 4.6% improvement. Signed-off-by:
Junchang Wang <junchangwang@gmail.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
stephen hemminger authored
This driver now uses Generic Receive Offload, not the older LRO. Change references to LRO in names and comments. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Acked-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by:
-
Martin Willi authored
Add TFC padding to all packets smaller than the boundary configured on the xfrm state. If the boundary is larger than the PMTU, limit padding to the PMTU. Signed-off-by:
Martin Willi <martin@strongswan.org> Acked-by:
-
Martin Willi authored
Add TFC padding to all packets smaller than the boundary configured on the xfrm state. If the boundary is larger than the PMTU, limit padding to the PMTU. Signed-off-by:
-
Martin Willi authored
The XFRMA_TFCPAD attribute for XFRM state installation configures Traffic Flow Confidentiality by padding ESP packets to a specified length. Signed-off-by:
-
Changli Gao authored
rq and tq are both protected by tx queue lock, so we can simply use the lockless variants of skb_queue. skb_queue_splice_tail_init() is used instead of the open coded and slow one. Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
Changli Gao authored
Signed-off-by:
-
Changli Gao authored
These debug stats are not exported, and become useless. Signed-off-by:
-
Jan Glauber authored
The used buffers counter is not incremented in case of an error so the counter can become negative. Increment the used buffers counter before checking for errors. Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Frank Blaschka authored
OSA l3 mode is hw accelerated VLAN only for IPv4. Take care we add the vlan hdr to a passthru frame in the device driver. Signed-off-by:
-
Einar Lueck authored
Only work through the IP adddress to do list if the card is UP or SOFTSETUP. Enables to configure VIPA add/del in offline mode. Signed-off-by:
Einar Lueck <elelueck@de.ibm.com> Signed-off-by:
-
Einar Lueck authored
Function qeth_l3_arp_query now queries for IPv6 addresses, too, if QETH_QARP_WITH_IPV6 is passed as parameter to the ioctl. HiperSockets and GuestLAN in HiperSockets mode provide corresponding entries. Signed-off-by:
-
Jiri Pirko authored
skb1 should be passed as parameter to sk_rcvqueues_full() here. Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
David S. Miller authored
We accidently set it to "true" for the case where we are using a route bound peer. Signed-off-by: -
Tobias Klauser authored
If br_multicast_new_group returns NULL, we would return 0 (no error) to the caller of br_multicast_add_group, which is not what we want. Instead br_multicast_new_group should return ERR_PTR(-ENOMEM) in this case. Also propagate the error number returned by br_mdb_rehash properly. Signed-off-by:
-
-
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
-
- Dec 10, 2010
-
-
Shan Wei authored
Remove macros which have been unused since the initial implementation (commit 7c657876 , [DCCP]: Initial implementation from Tue Aug 9 20:14:34 2005 -0700). Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Acked-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk>
-
Vladislav Zolotarov authored
Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Vladislav Zolotarov authored
bnx2x_src_init_t2() is used only when BCM_CNIC is defined. So, to avoid a compilation warning, we won't define it unless BCM_CNIC is defined. Signed-off-by:
-
