- Apr 04, 2015
-
-
Olof Johansson authored
Merge tag 'tegra-for-4.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: Device tree changes for v4.1-rc1" from Thierry Reding: A bunch of changes to improve support on the Nyan Big (Acer Chromebook 13). These enable the trackpad and make the WiFi card work. Changes to the userspace-exposed name of the soundcard are required for a better audio experience. Support for Nyan Blaze (HP Chromebook 14) is added. It is very similar to Nyan Big and therefore can enjoys many of the above improvements. Since the EMC driver can now be used to scale the frequency at which external memory is clocked, corresponding EMC frequency tables are added for Jetson TK1 and the Nyan boards. The Jetson TK1, Beaver and Nyan boards now also use generated pinmux data, which makes it easier to keep it in sync with the data provided by syseng. * tag 'tegra-for-4.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux : ARM: tegra: Add EMC timings to Nyan Blaze device tree ARM: tegra: Add EMC timings to Nyan Big device tree ARM: tegra: Add EMC timings to Jetson TK1 device tree ARM: tegra: Add EMC to Tegra124 device tree ARM: tegra: Add Tegra124 ACTMON support of: Add binding for NVIDIA Tegra ACTMON node ARM: tegra: nyan: The WiFi card is kept powered during suspend ARM: tegra: nyan: Add gpio-restart node ARM: tegra: nyan: Set maximum frequency for SPI flash ARM: tegra: Use generated pinmux data for Nyan Big ARM: tegra: Use pwrseq-simple for the wifi in Nyan ARM: tegra: Add node for trackpad in Nyan boards ARM: tegra: Add DTS for the nyan-blaze board ARM: tegra: Move generic parts out of the nyan-big DT ARM: tegra: Change model of sound card in Nyan Big ARM: tegra: Use generated pinmux for Beaver board ARM: tegra: Import latest Jetson TK1 pinmux Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Lina Iyer authored
Add ARM common idle state device bindings for cpuidle support for APQ 8064. Support Standalone power collapse (SPC) idle state (power down that does not affect any SoC idle states) for each cpu. Signed-off-by:
Lina Iyer <lina.iyer@linaro.org> Signed-off-by:
Kumar Gala <galak@codeaurora.org> Signed-off-by:
-
Lina Iyer authored
Add ARM common idle states device bindings for cpuidle support for APQ 8084. Support Standalone power collapse (SPC) idle state (power down that does not affect any SoC idle states) for each cpu. Signed-off-by:
-
Lina Iyer authored
Add ARM common idle states device bindings for cpuidle support for APQ 8974/8074. Support Standalone power collapse (SPC) idle state (power down that does not affect any SoC idle states) for each cpu. Signed-off-by:
-
Lina Iyer authored
Update the SAW2 DT bindings to add qcom,apq8064-saw2-v1.1-cpu compatible binding string to configure SPM registers and allow the SPM to put the core in deeper idle states when the core is idle. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Lina Iyer authored
Each Krait CPU in the QCOM 8084 SoC has an SAW power controller to regulate the power to the cpu and aide the core in entering idle states. Reference the SAW instance and associate the instance with the CPU core. Signed-off-by:
-
Lina Iyer authored
Each Krait CPU in the QCOM 8074/8974 SoC has an SAW power controller to regulate the power to the cpu and aide the core in entering idle states. Reference the SAW instance and associate the instance with the CPU core. Signed-off-by:
-
Lina Iyer authored
Document cpuidle states of QCOM cpus. In addition to arm-idle-state compatible string, the ARM idle state definition must define one of the following compatible strings - "qcom,idle-state-ret", "qcom,idle-state-spc", "qcom,idle-state-pc", The compatibles helps the SPM platform driver to use the correct idle function when the index to the idle state is passed to the platform driver. Signed-off-by:
-
Lina Iyer authored
Update qcom,saw2 node bindings with compatible strings to identify nodes that provides cpuidle functionality for a particular SoC. Remove unused compatible strings. Update examples for different SAW nodes. Signed-off-by:
-
Georgi Djakov authored
Add clocks/resets defines for the global clock controller found on Qualcomm MSM8916 SoCs. Signed-off-by:
Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by:
-
Kenneth Westfield authored
Model the Qualcomm Technologies LPASS hardware for the ipq806x SOC. Signed-off-by:
Kenneth Westfield <kwestfie@codeaurora.org> Acked-by:
Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by:
-
Ivan T. Ivanov authored
PMA8084 have 2 SPMI devices per physical package. Add their configuration nodes and include them in boards which are using AQP8084 based chipset. Signed-off-by:
Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by:
-
Ivan T. Ivanov authored
PM8841 and PM8941 have 2 SPMI devices per physical package. Add their configuration nodes and include them in boards which are using 8x74 based chipset. Signed-off-by:
-
Ivan T. Ivanov authored
Add SPMI PMIC Arbiter configuration nodes for APQ8084 and MSM8974. Signed-off-by:
-
Kumar Gala authored
Add the node for the LPASS clock controller found on a few qcom SoCs so that the clock driver can probe. Signed-off-by:
Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by:
-
Andy Gross authored
This patch adds TCSR support for use by the GSBI to automatically configure ADM CRCI values based on the GSBI port configuration. Signed-off-by:
Andy Gross <agross@codeaurora.org> Signed-off-by:
-
Andy Gross authored
This patch adds TCSR support for use by the GSBI to automatically configure ADM CRCI values based on the GSBI port configuration. Signed-off-by:
-
Andy Gross authored
This patch adds TCSR support for use by the GSBI to automatically configure ADM CRCI values based on the GSBI port configuration. Signed-off-by:
-
Andy Gross authored
This patch adds TCSR support for use by the GSBI to automatically configure ADM CRCI values based on the GSBI port configuration. Signed-off-by:
-
Andy Gross authored
This patch adds the device tree binding for the Qualcomm Top Control and Status Register device. The TCSR is comprised of a set of registers that provide various control and status functions for attached peripherals. Signed-off-by:
-
Kumar Gala authored
Document the Qualcomm MSM GICs implementation as compatible with the ARM GIC standard. Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "wireless wl12xx and omap device tree changes for v4.1" from Tony Lindgren: Wireless and omap changes to make wl12xx driver to use device tree data instead of platform data from Eliad Peller <eliad@wizery.com>: - Add device-tree support to the wlcore (wl12xx/wl18xx) driver. - Update the current users to use the bindings instead of pdata-quirks. - Finally, remove the deprecated wl12xx_platform_data struct Note that da850 board file code that still uses the platform data, but we have da850.dtsi that can be used instead. So it was decided that we should try to remove the wl12xx support from the da850 board file as suggested by Sekhar Nori <nsekhar@ti.com>. As it's the last patch in the series, the last patch can be simply reverted if needed. As this series touches quite a bit of arch code, it was suggested by Kalle Valo <kvalo@codeaurora.org> that the whole series should be merged via the arm-soc tree. * tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap : wlcore: remove wl12xx_platform_data ARM: dts: add wl12xx/wl18xx bindings wlcore: add device-tree support dt: bindings: add TI's wilink wireless device wl12xx: use frequency instead of enumerations for pdata clocks wlcore: set irq_trigger in board files instead of hiding behind a quirk + Linux 4.0-rc4 Signed-off-by:
-
Olof Johansson authored
Reported-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
http://github.com/broadcom/stblinuxOlof Johansson authored
Merge "Broadcom Device Tree changes for 4.1 #3" from Brian Norris: This pull request contains changes to the BCM7445 reference DTS files from Brian: - making a clock-frequency property decimal instead of hexadecimal - adding the irq0 interrupt controller node to make the reference DTS bootable again * tag 'arm-soc/for-4.1/devicetree-part-3' of http://github.com/broadcom/stblinux : ARM: dts: brcmstb: add IRQ0 controller ARM: dts: brcmstb: un-hexify clock frequency Signed-off-by:
-
Olof Johansson authored
Merge tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt Merge "at91: dt for 4.1 #2" from Nicolas Ferre: Second batch of DT changes for 4.1: - RTC nodes for at91sam9x5 boards and at91sam9n12ek - HLCDC nodes and pin definitions for sama5d3 & sama5d4 - additional uarts for sama5d3 * tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 : ARM: at91/dt: sama5d4: add rgb777 LCD line configuration ARM: at91/dt: sama5d4: fix LCD pins for RGB666 format ARM: at91/dt: sama5d4: add hlcdc node ARM: at91/dt: sama5d4: add lcdc pin definitions ARM: at91/dt: sama5d3: add uart1 pinctrl definition ARM: at91/dt: sama5d3: add uart0 ARM: at91/dt: define the HLCDC node available on sama5d3 SoCs ARM: at91/dt: add alternative pin muxing for sama5d3 lcd pins ARM: at91/dt: split sama5d3 lcd pin definitions to match RGB mode configs ARM: at91/dt: at91sam9n12ek: enable RTC ARM: at91/dt: at91sam9x5cm: enable RTC DT: video: atmel_lcdc: Add example of fixed framebuffer memory Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
Merge "ARM: mvebu: dt changes for v4.1 (round 2)" from Gregory Clement: mvebu dt changes for v4.1 (part #2) - add support for Performance Monitor Unit on most of mvebu SoCs - add nas2big support - add support for USB3 port On Armada 385 AP * tag 'mvebu-dt-4.1-2' of git://git.infradead.org/linux-mvebu : ARM: mvebu: armada-385-ap: Enable USB3 port ARM: mvebu: Enable Performance Monitor Unit on Armada 380/385 SoC ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC ARM: mvebu: Enable Performance Monitor Unit on Armada XP/370 SoCs ARM: Kirkwood: add DT description for nas2big Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omapOlof Johansson authored
Merge "omap device tree changes for v4.1, part1" from Tony Lindgren: Device tree related changes for omaps: - Add support for ChiliSOM - Add support for OpenPandora - Add support for BeagleBoard NAND - Enable crypto devices for omap3 devices - Add bindings for omap3 camera support - Updates for am437x and dra7x and dm816x SoCs * tag 'v4.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap : (27 commits) ARM: dts: Update Nanobone dts file ARM: dts: n950, n9: Add primary camera support ARM: dts: omap3: Add DT entries for OMAP 3 ISP Documentation: DT: Add bindings for omap3isp ARM: dts: Remove files omap34xx-hs.dtsi and omap36xx-hs.dtsi ARM: dts: omap3-tao3530: Include directly omap34xx.dtsi ARM: dts: n900: Enable omap sham and include directly omap34xx.dtsi ARM: dts: n9/n950: Enable omap crypto support ARM: dts: Remove PIN_INPUT for dm816x McSPI ARM: dts: Add cppi41 support for dm816x MUSB ARM: dts: Fix typo for dm816x usb0_pins ARM: dts: dra7x-evm: beagle-x15: Fix USB Peripheral ARM: dts: am57xx-beagle-x15: Do not include the atl header ARM: dts: DRA7: Remove ti,timer-dsp and ti,timer-pwm properties Documentation: omap-twl4030: Move ti,codec property to optional ARM: dts: omap3: Remove all references to ti,codec property ARM: dts: omap3-beagle: Add NAND device ARM: dts: AM4372: update hdq compatible property ARM: dts: omap3-pandora: add DM3730 1 GHz version ARM: dts: omap3-pandora: add OMAP3530 600 MHz version ... Signed-off-by:
-
- Apr 02, 2015
-
-
Olof Johansson authored
Merge tag 'renesas-dt3-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Third Round of Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman: * Add DMA sound support to r8a7791 and r8a7790 SoCs * tag 'renesas-dt3-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas : ARM: shmobile: r8a7791: sound enables Audio DMAC entry on DTSI ARM: shmobile: r8a7790: sound enables Audio DMAC entry on DTSI ARM: shmobile: r8a7791: enable Audio DMAC peri peri via sound driver ARM: shmobile: r8a7790: enable Audio DMAC peri peri via sound driver ARM: shmobile: r8a7791: add reg-names for sound ARM: shmobile: r8a7790: add reg-names for sound Signed-off-by:
-
Olof Johansson authored
Merge tag 'v4.1-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: rockchip: dts changes for 4.1" from Heiko Stuebner: This adds and enables the usbphy nodes on the rk3288 boards and enables the gmac on the firefly board. A new board the Popmetal-rk3288 is also added. And finally the pmic supplies for act8846 based boards are added, as the act8865/act8846 driver gained supply handling in the regulator tree. * tag 'v4.1-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip : ARM: dts: rockchip: complete rk3288-evb pmic supplies ARM: dts: rockchip: add input supplies for the act8846 on Radxa Rock ARM: dts: add rk3288 PopMetal board dt-bindings: add root compatible property for PopMetal board ARM: dts: rockchip: enable gmac on rk3288-firefly ARM: dts: rockchip: enable usbphy on rk3288-firefly ARM: dts: rockchip: Enable usb PHY on rk3288-evb board ARM: dts: rockchip: add rk3288 usb PHY Signed-off-by:
-
Olof Johansson authored
File uses dash in the filename, not underscore. Reported-by:
Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
- Mar 30, 2015
-
-
Tomeu Vizoso authored
This adds a new file, tegra124-nyan-blaze-emc.dtsi that contains valid timings for the EMC memory clock. The file is included to the main device tree file for the Nyan Blaze. The frequency 528MHz is missing because we don't currently have a timing configuration that works. Additionally, only the timings for the ram-code 1 is present as that's what could be tested currently, though downstream has timings for more ram-codes. Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Tomeu Vizoso authored
This adds a new file, tegra124-nyan-big-emc.dtsi that contains valid timings for the EMC memory clock. The file is included to the main device tree file for the Nyan Big. The frequency 528MHz is missing because we don't currently have a timing configuration that works. Additionally, only the timings for the ram-code 1 is present as that's what could be tested currently, though downstream has timings for more ram-codes. Signed-off-by:
-
Mikko Perttunen authored
This adds a new file, tegra124-jetson-tk1-emc.dtsi that contains valid timings for the EMC memory clock. The file is included to the main Jetson TK1 device tree. The data is generated from the V5.0.17 version of the DVFS tables. Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by:
-
Mikko Perttunen authored
This adds a node for the EMC memory controller. It is always enabled, but only provides read-only functionality without board-specific timing tables. Signed-off-by:
-
Tomeu Vizoso authored
Add device node for the ACTMON block to the Tegra124 device tree. Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
-
Tomeu Vizoso authored
This block gathers statistics about various counters and can be configured to fire interrupts when thresholds are crossed. Signed-off-by:
-
- Mar 25, 2015
-
-
Eliad Peller authored
Now that we have wlcore device-tree bindings in place (for both wl12xx and wl18xx), remove the legacy wl12xx_platform_data struct, and move its members into the platform device data (that is passed to wlcore) Davinci 850 is the only platform that still set the platform data in the legacy way (and doesn't have DT bindings), so remove the relevant code/Kconfig option from the board file (as suggested by Sekhar Nori) Since no one currently uses wlcore_spi, simply remove its platform data support (DT bindings will have to be added if someone actually needs it) Signed-off-by:
Luciano Coelho <luca@coelho.fi> Signed-off-by:
Eliad Peller <eliad@wizery.com> Tested-by:
Nikita Kiryanov <nikita@compulab.co.il> Acked-by:
Kalle Valo <kvalo@codeaurora.org> Acked-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Eliad Peller authored
Replace all the pdata-quirks for setting wl12xx/wl18xx platform data with proper DT definitions. Signed-off-by:
Javier Martinez Canillas <javier@dowhile0.org> Acked-by:
Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by:
-
Eliad Peller authored
When running with device-tree, we no longer have a board file that can set up the platform data for wlcore. Allow this data to be passed from DT. Signed-off-by:
Ido Yariv <ido@wizery.com> Signed-off-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Tested-by:
-
Eliad Peller authored
Add device tree binding documentation for TI's wilink (wl12xx and wl18xx) wlan chip. Signed-off-by:
-
