- Feb 10, 2020
-
-
Jyri Sarha authored
To enable HDMI audio the SND_SOC_HDMI_CODEC needs to be configured. Enable HDMI audio by selecting SND_SOC_HDMI_CODEC if SND_SOC is configured. SND_SOC_HDMI_CODEC has no config menu entry and should be selected automatically by the drivers using it. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> [narmstrong: atomatically -> automatically] Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191129152342.29145-1-jsarha@ti.com
-
Peter Ujfalusi authored
Add basic support for the Toshiba TC358768 RGB to DSI bridge. Not all the features of the TC358768 is implemented by the initial driver: MIPI_DSI_MODE_VIDEO and MIPI_DSI_FMT_RGB888 is only supported and tested. Only write is implemented for mipi_dsi_host_ops.transfer. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Peter Ujfalusi authored
TC358768/TC358778 is a Parallel RGB to MIPI DSI bridge. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Bogdan Togorean authored
ADV7535 is a part compatible with ADV7533 but it supports 1080p@60hz and v1p2 supply is fixed to 1.8V Signed-off-by:
Bogdan Togorean <bogdan.togorean@analog.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Bogdan Togorean authored
ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows 1080p@60Hz. v1p2 is fixed to 1.8V on ADV7535. Signed-off-by:
-
Bogdan Togorean authored
This commit remove DRM_I2C_ADV7533 resulting a simpler driver and less choices in Kconfig. Signed-off-by:
-
Thomas Zimmermann authored
Atomic modesetting doesn't use struct drm_connector_funcs.dpms and the set function, drm_helper_connector_dpms(), wouldn't support it anyway. So keep the pointer to NULL. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200207141602.4760-2-tzimmermann@suse.de
-
Thomas Zimmermann authored
Atomic modesetting doesn't use struct drm_connector_funcs.dpms and the set function, drm_helper_connector_dpms(), wouldn't support it anyway. So keep the pointer to NULL. Signed-off-by:
-
Andy Shevchenko authored
The spi_register_driver() will set the ->owner member to THIS_MODULE. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
David Lechner <david@lechnology.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200131204923.48928-4-andriy.shevchenko@linux.intel.com
-
Andy Shevchenko authored
There is one OF call in the driver that limits its area of use. Replace it to generic device_get_match_data() and get rid of OF dependency. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Andy Shevchenko authored
The spi_register_driver() will set the ->owner member to THIS_MODULE. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Andy Shevchenko authored
There is one OF call in the driver that limits its area of use. Replace it to generic device_get_match_data() and get rid of OF dependency. While here, cast SPI driver data to certain enumerator type. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Lechner <david@lechnology.com> Signed-off-by:
-
Kamlesh Gurudasani authored
This adds support fot ilitek,ili9486 based displays with shift register in front of controller. Ozzmaker,Piscreen and Waveshare,rpi-lcd-35 are such displays. Acked-by: Sam Ravnborg <sam@ravnborg.org> (v4) Reviewed-by: Noralf Tronnes <noralf@tronnes.org> (v4) Signed-off-by:
Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com> Signed-off-by:
-
Kamlesh Gurudasani authored
This binding is for the tft displays based on ilitek,ili9486. ozzmaker,piscreen and waveshare,rpi-lcd-35 are such displays Signed-off-by:
-
- Feb 09, 2020
-
-
Benjamin Gaignard authored
Convert orisetech,otm8009a to json-schema. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
-
Benjamin Gaignard authored
Convert raydium,rm68200 to json-schema. Signed-off-by:
-
Sam Ravnborg authored
To complement panel-simple.yaml, create panel-simple-dsi.yaml. panel-simple-dsi-yaml are for all simple DSP panels with a single power-supply and optional backlight / enable GPIO. Migrate panasonic,vvx10f034n00 over to the new file. The objectives with one file for all the simple DSI panels are: - Make it simpler to add bindings for simple DSI panels - Keep the number of bindings file lower - Keep the binding documentation for simple DSI panels more consistent Signed-off-by:
-
- Feb 07, 2020
-
-
Gerd Hoffmann authored
If the virtio device supports indirect ring descriptors we need only one ring entry for the whole command. Take that into account when checking whenever the virtqueue has enough free entries for our command. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200207064653.14403-1-kraxel@redhat.com
-
- Feb 06, 2020
-
-
Chia-I Wu authored
It becomes clear that virtio_gpu_queue_fenced_ctrl_buffer should be responsible for setting up sgs and virtio_gpu_queue_ctrl_sgs should be responsible for queuing sgs. Signed-off-by:
-
Chia-I Wu authored
When vqs_ready is false, vq should be considered invalid and we should not check vq->num_free. After this change, a fenced command queued before the vqs are ready will have fence id 0 and will be considered done. Signed-off-by:
-
Chia-I Wu authored
Signed-off-by:
-
Chia-I Wu authored
sgs setup does not need to be in the critical section. Signed-off-by:
-
Chia-I Wu authored
We don't propagate erros to the callers. We have to unlock object arrays on errors. Signed-off-by:
-
Chia-I Wu authored
We can get it from vbuf. Signed-off-by:
-
Chia-I Wu authored
It is a helper to return the virtio_gpu_ctrl_hdr in a vbuf. Signed-off-by:
-
Chia-I Wu authored
The handling of virtqueue_add_sgs ENOSPC error is incorrect because it can result in out-of-order virtqueue_add_sgs and break fences. We never get ENOSPC anyway because the caller waits until there is enough space (the other caller that did not wait was removed in commit 32d6c2c5 ("drm/virtio: Rewrite virtio_gpu_queue_ctrl_buffer using fenced version.")). Remove the incorrect and unnecessary error path. This also adds a WARN_ON(ret) until we properly handle errors. Signed-off-by:
-
Chia-I Wu authored
outcnt may be greater than 1 since commit e1218b8c ("drm/virtio: Use vmalloc for command buffer allocations."). Fixes: e1218b8c ("drm/virtio: Use vmalloc for command buffer allocations.") Signed-off-by:
-
Gerd Hoffmann authored
Avoid flooding the log in case we screw up badly. Signed-off-by:
-
Thomas Zimmermann authored
The implementation of struct drm_mode_config_funcs.mode_valid verifies that enough video memory is available for a given display mode. Signed-off-by:
-
Thomas Zimmermann authored
The implementation of struct drm_mode_config_funcs.mode_valid verifies that enough video memory is available for a given display mode. Signed-off-by:
-
Thomas Zimmermann authored
The implementation of struct drm_mode_config_funcs.mode_valid verifies that enough video memory is available for a given display mode. This replaces similar functionality in bochs_connector_mode_valid(). v2: * remove bochs_connector_mode_valid(), which now serves no purpose Signed-off-by:
-
Thomas Zimmermann authored
Devices with low amount of dedicated video memory may not be able to use all possible display modes, as the framebuffers may not fit into VRAM. The new helper function drm_vram_helper_mode_valid() implements a simple test to sort out all display modes that can not be used in any case. Drivers should call this function from struct drm_mode_config_funcs.mode_valid. The functionality was originally implemented by the ast driver, which is being converted as well. v2: * WARN_ON if VRAM memory manager has not been initialized * documentation fixes * unexported drm_vram_helper_mode_valid_internal() Signed-off-by:
-
- Feb 05, 2020
-
-
Gerd Hoffmann authored
virtio has its own commit fail function. Add the drm_atomic_helper_fake_vblank() call there. Fixes: 2a735ad3 ("drm/virtio: Remove sending of vblank event") Signed-off-by:
-
Chris Wilson authored
Internally for "consistent" maps, we create a temporary struct drm_dma_handle in order to use our own dma_alloc_coherent wrapper then destroy the temporary wrap. Simplify our logic by removing the temporary wrapper! Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma facilities, and we have no special reason within the drm layer to behave differently. In particular, since commit de09d31d Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Fri Jan 15 16:51:42 2016 -0800 page-flags: define PG_reserved behavior on compound pages As far as I can see there's no users of PG_reserved on compound pages. Let's use PF_NO_COMPOUND here. it has been illegal to combine GFP_COMP with SetPageReserved, so lets stop doing both and leave the dma layer to its own devices. Reported-by: Taketo Kabe Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027 Fixes: de09d31d ("page-flags: define PG_reserved behavior on compound pages") Signed-off-by:
-
- Feb 04, 2020
-
-
Etienne Carriere authored
Change DSI driver to not print an error trace when probe is deferred for a clock resource. Signed-off-by:
Etienne Carriere <etienne.carriere@st.com> Reviewed-by:
-
Yannick Fertre authored
Following investigations of a hardware bug, the LIE interrupt can occur while the display controller is not activated. LIE interrupt (vblank) don't have to be set if the CRTC is not enabled. Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Acked-by:
-
Yannick Fertre authored
The number of interrupts depends on the ltdc version. Don't try to get interrupt which not exist, avoiding kernel warning messages. Signed-off-by:
-
Thomas Zimmermann authored
Daniel asked me to serve as co-maintainer of the drm-misc tree. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Acked-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
-
- Feb 01, 2020
-
-
Boris Brezillon authored
The lt089ac29000 panel is an LVDS panel, not a DPI one. Fix the definition to reflect this fact. v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * New patch Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Suggested-by:
-
