- Jan 29, 2023
-
-
Jagan Teki authored
Radxa E25 is a Carrier board, so update the model name for Radxa E25 as suggested by the Radxa website. Fixes: 2bf2f4d9 ("arm64: dts: rockchip: Add Radxa CM3I E25") Cc: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20230123071654.73139-4-jagan@amarulasolutions.com Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Jagan Teki authored
With module and carrier board topology, carrier board dts will include module dtsi files for creating complete platform. The carrier board dts will have final model name and compatible string so any model name added in module dtsi will eventually replaced. This happened for any devicetree property if the same property is updated or added twice. So, drop this unneeded model name from module dtsi. Cc: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by:
-
Jagan Teki authored
In order to function the Radxa E25 Carrier board, it is mandatory to mount the Radxa CM3i module. Add Radxa CM3i compatible as fallback compatible to string to satisfy the Module and Carrier board topology. Fixes: 2bf2f4d9 ("arm64: dts: rockchip: Add Radxa CM3I E25") Cc: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by:
-
Jagan Teki authored
The compatible string "radxa,radxa-cm3" referring the product name as "Radxa Radxa CM3" but the actual product name is "Radxa CM3". Fix the compatible strings. Fixes: 24a28d3e ("dt-bindings: arm: rockchip: Add Radxa Compute Module 3") Fixes: 7469ab52 ("arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3") Fixes: 096ebfb7 ("arm64: dts: rockchip: Add Radxa Compute Module 3 IO board") Suggested-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Jagan Teki authored
Radxa Compute Module 3 has an onboard AW_CM256SM WiFi/BT module. Add nodes for enabling it. Signed-off-by:
-
Manoj Sai authored
Add ethernet nodes for enabling gmac1 on the Radxa CM3 IO board. Signed-off-by:
Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Link: https://lore.kernel.org/r/20230125161023.12115-1-jagan@amarulasolutions.com Signed-off-by:
-
Chris Morgan authored
Add Samsung AMS495QA01 panel to RG503. Co-developed-by:
Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20230123154603.1315112-5-macroalpha82@gmail.com Signed-off-by:
-
Michael Riesch authored
The rk3568-pinctrl.dtsi only defines the 24-bit RGB interface. Add separate nodes for the 16-bit and 18-bit version, respectively. While at it, split off the clock/sync signals from the data signals. The exact mapping of the data pins was discussed here: https://lore.kernel.org/linux-rockchip/f33a0488-528c-99de-3279-3c0346a03fd6@wolfvision.net/T/ Signed-off-by:
Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20230124054706.3921383-7-michael.riesch@wolfvision.net Signed-off-by:
-
- Jan 19, 2023
-
-
Jagan Teki authored
Radxa SBC boards like ROCK 3A/4 models do support eMMC and SDcard via external connector slots. Mark, the eMMC has mmc0 by considering the Rockchip boot order priority as both MMC devices are connected externally. Reported-by:
FUKAUMI Naoki <naoki@radxa.com> Signed-off-by:
-
Jagan Teki authored
Radxa has produced Compute Modules like RK3399pro VMARC and CM3i with onboarding eMMC flash, so the eMMC is the primary MMC device. On the other hand, Rockchip boot orders start from eMMC from an MMC device perspective. Mark, the eMMC has mmc0 to satisfy the above two conditions. Reported-by:
-
- Jan 16, 2023
-
-
Jagan Teki authored
Radxa Compute Module 3(CM3) IO board is an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Specification: - 1x HDMI, - 2x MIPI DSI - 2x MIPI CSI2 - 1x eDP - 1x PCIe card - 2x SATA - 2x USB 2.0 Host - 1x USB 3.0 - 1x USB 2.0 OTG - Phone jack - microSD slot - 40-pin GPIO expansion header - 12V DC Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board. Co-developed-by:
-
Jagan Teki authored
Radxa Compute Module 3(CM3) is one of the modules from a series System On Module based on the Radxa ROCK 3 series and is compatible with Raspberry Pi CM4 pinout and form factor. Specification: - Rockchip RK3566 - up to 8GB LPDDR4 - up to 128GB high performance eMMC - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, BT 5.0, BLE with onboard and external antenna. - Gigabit Ethernet PHY Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Since Radxa CM3 is compatible with Raspberry Pi CM4 pinout so it is possible to mount Radxa CM3 on top of the Rasberry Pi CM4 IO board. Add support for Radxa CM3. Co-developed-by:
-
Jagan Teki authored
Radxa Compute Module 3(CM3) is one of the modules from a series System On Module based on the Radxa ROCK 3 series and is compatible with Raspberry Pi CM4 in pinout and form factor. Specification: - Rockchip RK3566 - up to 8GB LPDDR4 - up to 128GB high performance eMMC - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, BT 5.0, BLE with onboard and external antenna. - Gigabit Ethernet PHY Add dt-bindings for Radxa CM3. Signed-off-by:
-
Lucas Tanure authored
Add network PHY rx delay and change type to rgmii, so that it is applied. This fixes packet loss when more than a few packets are exchanged. Fixes: d1824cf9 ("arm64: dts: rockchip: Add rock-5a board") Signed-off-by:
Lucas Tanure <lucas.tanure@collabora.com> Link: https://lore.kernel.org/r/20230113130220.662194-1-lucas.tanure@collabora.com Signed-off-by:
-
- Jan 11, 2023
-
-
Chris Morgan authored
Add support for the Hynitron cst340 touchscreen driver to the Anbernic RG353P and RG353V devices. Note the RG353VS device does not have a touchscreen. https://lore.kernel.org/linux-input/Y1y9e9sgE%2FDck9fB@google.com/ Changes since V1: - Removed 'status = "okay";', as it was never disabled. Signed-off-by:
-
Andy Yan authored
There is a AP6398s wifi/bt module on this board. Fix the sdmmc1 dt node to make wifi work. Signed-off-by:
Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20221229115111.3899793-1-andyshrk@163.com Signed-off-by:
-
Jagan Teki authored
Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI. IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux. Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform. Add support for Edgeble Neu6 Model A IO Board. Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20230110134658.820691-3-jagan@edgeble.ai Signed-off-by:
-
Jagan Teki authored
Neural Compute Module 6(Neu2) is a 96boards SoM-CB compute module based on Rockchip RK3588 from Edgeble AI. General features: - Rockchip RK3588 - up to 32GB LPDDR4x - up to 128GB eMMC - 2x MIPI CSI2 FPC On module WiFi6/BT5 is available in the following Neu6 variants. Neu6 needs to mount on top of associated Edgeble IO boards for creating complete platform solutions. Enable eMMC for now to boot Linux successfully. Add support for Edgeble Neu6 Model A SoM. Signed-off-by:
-
Jonas Karlman authored
HDMI CEC is configured to select HDMITX_CEC_M0 function of GPIO0_C7 by default in rk356x.dtsi. On Radxa ROCK 3 Model A it is routed to HDMITX_CEC_M1 according to board schematic [1]. Fix HDMI CEC by overriding pinctrl in hdmi node to select HDMITX_CEC_M1. [1] https://dl.radxa.com/rock3/docs/hw/3a/ROCK-3A-V1.3-SCH.pdf Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20230110225547.1563119-3-jonas@kwiboo.se [added pinctrl-names duplicate] Signed-off-by:
-
Jonas Karlman authored
clk_rtc_32k and its child clock clk_hdmi_cec detauls to a rate of 24 MHz and not to 32 kHz on RK356x. Fix this by assigning clk_rtc_32k a rate of 32768, also assign the parent to clk_rtc32k_frac. Signed-off-by:
-
Christopher Obbard authored
In the previous version, the sdhci alias was set to mmc1: an artifact leftover from the port from vendor kernel. Update the alias to mmc0 to match the device's boot order. Fixes: 6fb2d1549786 ("arm64: dts: rockchip: Add rock-5b board") Signed-off-by:Christopher Obbard <chris.obbard@collabora.com> Link: https://lore.kernel.org/r/20230110195352.272360-4-chris.obbard@collabora.com Signed-off-by:
-
Christopher Obbard authored
There is a line which is empty. Remove it. Fixes: a4a8f1afb360 ("arm64: dts: rockchip: Add rock-5a board") Signed-off-by: -
Christopher Obbard authored
In the previous version, the sdhci alias was set to mmc1: an artifact leftover from the port from vendor kernel. Update the alias to mmc0 to match the device's boot order. Fixes: a4a8f1afb360 ("arm64: dts: rockchip: Add rock-5a board") Signed-off-by: -
Christopher Obbard authored
Add board file for the RK3588 Rock 5B board. This is a basic implementation which just brings up the eMMC and UART which is enough to successfully boot Linux. The ethernet controller is connected via PCIe so support will come in a follow-up patch. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230109155801.51642-8-sebastian.reichel@collabora.com Signed-off-by:
-
Sebastian Reichel authored
Add board file for the RK3588s Rock 5A board. While the hardware offers plenty of peripherals and connectivity this basic implementation just handles things required to access eMMC, UART and Ethernet (i.e. enough to successfully boot Linux). Reviewed-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by:
-
Kever Yang authored
Add board file for the RK3588 evaluation board. While the hardware offers plenty of peripherals and connectivity this basic implementation just handles things required to successfully boot Linux from eMMC, connect via UART or Ethernet. Signed-off-by:
Kever Yang <kever.yang@rock-chips.com> [rebase, update commit message, use EVB1 for SoC bringup] Reviewed-by:
-
Sebastian Reichel authored
Add DT binding documentation for the Rockchip RK3588 EVB1, Radxa Rock 5 Model A and B. Co-Developed-by:
-
Kever Yang authored
This initial version supports CPU, dma, interrupts, timers, UART and SDHCI (everything necessary to boot Linux on this system on chip) as well as Ethernet, I2C, PWM and SPI. The DT is split into rk3588 and rk3588s, which is a reduced version (i.e. with less peripherals) of the former. Co-Developed-by:
Yifeng Zhao <yifeng.zhao@rock-chips.com> Signed-off-by:
Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
-
Jianqun Xu authored
This adds the pin controller data for rk3588 and rk3588s. Co-Developed-by:
Shengfei Xu <xsf@rock-chips.com> Signed-off-by:
Damon Ding <damon.ding@rock-chips.com> Signed-off-by:
Steven Liu <steven.liu@rock-chips.com> Signed-off-by:
Jon Lin <jon.lin@rock-chips.com> Signed-off-by:
Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by:
Jianqun Xu <jay.xu@rock-chips.com> [port from vendor tree merging all fixes] Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sebastian Reichel authored
Add IOC and PHP GRF syscon compatibles for RK3588. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Manoj Sai authored
Increase the spi-max-frequency of nor flash from 10Mhz to 30Mhz,this improves the flash raw write speed by 0.9 MB/s to 1.6MB/s and the time taken to write is get reduced from 36 seconds to 20 seconds. Signed-off-by:
-
Chris Morgan authored
Update the blue LED to be controlled via pwm to enable control of LED brightness. Add red LED as a GPIO controlled LED. The documentation stated "label" was depreciated so function and color was used instead. The LED names (led-2 and led-3) are given because that is what they are numbered on the board itself; LED 1 is wired directly into an always on regulator and is not controllable. LED 2 is labelled "alive" on the board and documentation recommends we set the function as status over other miscellaneous functions. LED 3 is labelled "chg" on the board. Signed-off-by:
-
Chris Morgan authored
Without the trips, the following errors are received in the dmesg log and the rockchip-thermal driver fails to load the gpu sensor: "thermal_sys: Failed to find 'trips' node" "rockchip-thermal ff280000.tsadc: failed to register sensor 1: -22" Trip values are assumed, unfortunately, as the same values as the CPU. The datasheet and TRM didn't appear to have any information regarding thermals for the GPU. Stress tested successfully on my Odroid Go Advance. Signed-off-by:
-
Chris Morgan authored
The Odroid Go Advance devicetree tries to set the rate for the cpll clock to 17MHz, which is not a supported rate. This fails, and triggers the error of "clk: couldn't set cpll clk rate to 17000000 (-22), current rate: 17000000" in the dmesg log. Remove the incorrect rate. Signed-off-by:
-
Chris Morgan authored
Change the audio card name for the Odroid Go Advance series to rk817_int. This matches the audio card name of the Anbernic RG353V. This is done to provide a consistent card name so that a single ALSA UCM file can be used for all (identical) implementations of this codec and configuration combo. The rk817_int configuration is for when the internal speaker amplifier of the rk817 is used. The other Anbernic devices have the name as rk817_ext for when an external speaker amplifier is used. Signed-off-by:
-
Chukun Pan authored
Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. This device is similar to the NanoPi R2S, and has a 16MB SPI NOR (mx25l12805d). The reset button is changed to directly reset the power supply, another detail is that both network ports have independent MAC addresses. Signed-off-by:
Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20221203074149.11543-3-amadeus@jmu.edu.cn Signed-off-by:
-
Chukun Pan authored
Add devicetree binding documentation for the Orange Pi R1 Plus. Signed-off-by:
-
Alex Riabchenko authored
Add the infrared receiver and its associated pinctrl entry. Based on Aurelien Jarno's patchset: https://lore.kernel.org/lkml/20220930051246.391614-14-aurelien@aurel32.net/ Signed-off-by:
Alex Riabchenko <d3adme4t@gmail.com> Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20221214155433.112257-1-linux@fw-web.de Signed-off-by:
-
Andy Yan authored
LubanCat 2 is a rk3568 based SBC from EmbedFire. Specification: - Rockchip rk3568 - LPDDR4/4X 1/2/4/8 GB - TF scard slot - eMMC 8/32/64/128 GB - Gigabit ethernet x 2 - HDMI out - USB 2.0 Host x 1 - USB 2.0 Type-C OTG x 1 - USB 3.0 Host x 1 - Mini PCIE interface for WIFI/BT module - M.2 key for 2280 NVME - 40 pin header Signed-off-by:
-
Andy Yan authored
Add EmbedFire LubanCat 2 Signed-off-by:
-
