- Jan 02, 2024
-
-
Michael Chan authored
Change the unused flag to BNXT_FLTR_INSERTED. To prepare for multiple pathways that an ntuple filter can be deleted, we add this flag. These filter structures can be retreived from the RCU hash table but only the caller that sees that the BNXT_FLTR_INSERTED flag is set can delete the filter structure and clear the flag under spinlock. Reviewed-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Add the helper function to look up the ntuple filter from the hash index and use it in bnxt_rx_flow_steer(). The helper function will also be used by user defined ntuple filters in the next patches. Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Pavan Chebbi authored
For ntuple filters added by aRFS, the Toeplitz hash calculated by our NIC is available and is used to store the ntuple filter for quick retrieval. In the next patches, user defined ntuple filter support will be added and we need to calculate the same hash for these filters. The same hash function needs to be used so we can detect duplicates. Add the function bnxt_toeplitz() to calculate the Toeplitz hash for user defined ntuple filters. bnxt_toeplitz() uses the same Toeplitz key and the same key length as the NIC. bnxt_get_ntp_filter_idx() is added to return the hash index. For aRFS, the hash comes from the NIC. For user defined ntuple, we call bnxt_toeplitz() to calculate the hash index. Reviewed-by:
-
Michael Chan authored
Refactor the L2 filter alloc/free logic so that these filters can be added/deleted by the user. The bp->ntp_fltr_bmap allocated size is also increased to allow enough IDs for L2 filters. Reviewed-by:
-
Michael Chan authored
With the new bnxt_l2_filter structure, we can now re-structure the bnxt_ntuple_filter structure to point to the bnxt_l2_filter structure. We eliminate the L2 ether address info from the ntuple filter structure as we can get the information from the L2 filter structure. Note that the source L2 MAC address is no longer used. Reviewed-by:
-
Michael Chan authored
The current driver only has an array of 4 additional L2 unicast addresses to support the netdev uc address list. Generalize and expand this infrastructure with an L2 address hash table so we can support an expanded list of unicast addresses (for bridges, macvlans, OVS, etc). The L2 hash table infrastructure will also allow more generalized n-tuple filter support. This patch creates the bnxt_l2_filter structure and the hash table. This L2 filter structure has the same bnxt_filter_base structure as used in the bnxt_ntuple_filter structure. All currently supported L2 filters will now have an entry in this new table. Note that L2 filters may be created for the VF. VF filters should not be freed when the PF goes down. Add some logic in bnxt_free_l2_filters() to allow keeping the VF filters or to free everything during rmmod. Reviewed-by:
-
Michael Chan authored
This is in preparation to support user defined L2 (ether) filters, which will have many similarities with ntuple filters. Refactor bnxt_ntuple_filter structure to have a bnxt_filter_base structure that can be re-used by the L2 filters. Reviewed-by:
-
David S. Miller authored
Merge tag 'for-net-next-2023-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btnxpuart: Fix recv_buf return value - L2CAP: Fix responding with multiple rejects - Fix atomicity violation in {min,max}_key_size_set - ISO: Allow binding a PA sync socket - ISO: Reassociate a socket with an active BIS - ISO: Avoid creating child socket if PA sync is terminating - Add device 13d3:3572 IMC Networks Bluetooth Radio - Don't suspend when there are connections - Remove le_restart_scan work - Fix bogus check for re-auth not supported with non-ssp - lib: Add documentation to exported functions - Support HFP offload for QCA2066 ==================== Signed-off-by:
-
Vegard Nossum authored
Commit f061c9f7 ("Documentation: Document each netlink family") added a new Python script that is invoked during 'make htmldocs' and which reads the netlink YAML spec files. Using the virtualenv from scripts/sphinx-pre-install, we get this new error wen running 'make htmldocs': Traceback (most recent call last): File "./tools/net/ynl/ynl-gen-rst.py", line 26, in <module> import yaml ModuleNotFoundError: No module named 'yaml' make[2]: *** [Documentation/Makefile:112: Documentation/networking/netlink_spec/rt_link.rst] Error 1 make[1]: *** [Makefile:1708: htmldocs] Error 2 Fix this by adding 'pyyaml' to requirements.txt. Note: This was somehow present in the original patch submission: <https://lore.kernel.org/all/20231103135622.250314-1-leitao@debian.org/> I'm not sure why the pyyaml requirement disappeared in the meantime. Fixes: f061c9f7 ("Documentation: Document each netlink family") Cc: Breno Leitao <leitao@debian.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by:
-
David S. Miller authored
Matthieu Baerts says: ==================== mptcp: add CurrEstab MIB counter This MIB counter is similar to the one of TCP -- CurrEstab -- available in /proc/net/snmp. This is useful to quickly list the number of MPTCP connections without having to iterate over all of them. Patch 1 prepares its support by adding new helper functions: - MPTCP_DEC_STATS(): similar to MPTCP_INC_STATS(), but this time to decrement a counter. - mptcp_set_state(): similar to tcp_set_state(), to change the state of an MPTCP socket, and to inc/decrement the new counter when needed. Patch 2 uses mptcp_set_state() instead of directly calling inet_sk_state_store() to change the state of MPTCP sockets. Patch 3 and 4 validate the new feature in MPTCP "join" and "diag" selftests. ==================== Signed-off-by:
Matthieu Baerts <matttbe@kernel.org> Signed-off-by:
-
Geliang Tang authored
This patch adds a new helper chk_msk_cestab() to check the current established connections counter MIB_CURRESTAB in diag.sh. Invoke it to check the counter during the connection after every chk_msk_inuse(). Signed-off-by:
Geliang Tang <geliang.tang@linux.dev> Reviewed-by:
-
Geliang Tang authored
This patch adds a new helper chk_cestab_nr() to check the current established connections counter MIB_CURRESTAB. Set the newly added variables cestab_ns1 and cestab_ns2 to indicate how many connections are expected in ns1 or ns2. Invoke check_cestab() to check the counter during the connection in do_transfer() and invoke chk_cestab_nr() to re-check it when the connection closed. These checks are embedded in add_tests(). Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Geliang Tang authored
This patch replaces all the 'inet_sk_state_store()' calls under net/mptcp with the new helper mptcp_set_state(). Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/460 Signed-off-by:
-
Geliang Tang authored
Add a new MIB counter named MPTCP_MIB_CURRESTAB to count current established MPTCP connections, similar to TCP_MIB_CURRESTAB. This is useful to quickly list the number of MPTCP connections without having to iterate over all of them. This patch adds a new helper function mptcp_set_state(): if the state switches from or to ESTABLISHED state, this newly added counter is incremented. This helper is going to be used in the following patch. Similar to MPTCP_INC_STATS(), a new helper called MPTCP_DEC_STATS() is also needed to decrement a MIB counter. Signed-off-by:
-
David S. Miller authored
Dmitry Safonov says: ==================== selftest/net: Some more TCP-AO selftest post-merge fixups Note that there's another post-merge fix for TCP-AO selftests, but that doesn't conflict with these, so I don't resend that: https://lore.kernel.org/all/20231219-b4-tcp-ao-selftests-out-of-tree-v1-1-0fff92d26eac@arista.com/T/#u ==================== Tested-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Dmitry Safonov <dima@arista.com>
-
Dmitry Safonov authored
Since commit f5769fae ("net: Namespace-ify sysctl_optmem_max") optmem_max is per-netns, so need of switching to root namespace. It seems trivial to keep the old logic working, so going to keep it for a while (at least, until kernel with netns-optmem_max will be release). Currently, there is a test that checks that optmem_max limit applies to TCP-AO keys and a little benchmark that measures linked-list TCP-AO keys scaling, those are fixed by this. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Dmitry Safonov authored
In unsigned-md5 selftests ip_route_add() is not needed in client_add_ip(): the route was pre-setup in __test_init() => link_init() for subnet, rather than a specific ip-address. Currently, __ip_route_add() mistakenly always sets VRF table to RT_TABLE_MAIN - this seems to have sneaked in during unsigned-md5 tests debugging. That also explains, why ip_route_add_vrf() ignored EEXIST, returned by fib6. Yet, keep EEXIST ignoring in bench-lookups selftests as it's expected that those selftests may add the same (duplicate) routes. Reported-by:
-
David S. Miller authored
Merge tag 'wireless-next-2023-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The third "new features" pull request for v6.8. This is a smaller one to clear up our tree before the break and nothing really noteworthy this time. Major changes: stack * cfg80211: introduce cfg80211_ssid_eq() for SSID matching * cfg80211: support P2P operation on DFS channels * mac80211: allow 64-bit radiotap timestamps iwlwifi * AX210: allow concurrent P2P operation on DFS channels ==================== Signed-off-by:
-
David S. Miller authored
Jamal Hadi Salim says: ==================== net/sched: retire tc ipt action In keeping up with my status as a hero who removes code: another one bites the dust. The tc ipt action was intended to run all netfilter/iptables target. Unfortunately it has not benefitted over the years from proper updates when netfilter changes, and for that reason it has remained rudimentary. Pinging a bunch of people that i was aware were using this indicates that removing it wont affect them. Retire it to reduce maintenance efforts. So Long, ipt, and Thanks for all the Fish. ==================== Acked-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Jamal Hadi Salim authored
Now that we are retiring the IPT action. Reviewed-by:
Victor Noguiera <victor@mojatatu.com> Reviewed-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Jamal Hadi Salim authored
The tc ipt action was intended to run all netfilter/iptables target. Unfortunately it has not benefitted over the years from proper updates when netfilter changes, and for that reason it has remained rudimentary. Pinging a bunch of people that i was aware were using this indicates that removing it wont affect them. Retire it to reduce maintenance efforts. Buh-bye. Reviewed-by:
-
Eric Dumazet authored
dev->gso_partial_features is read from tx fast path for GSO packets. Move it to appropriate section to avoid a cache line miss. Fixes: 43a71cd6 ("net-device: reorganize net_device fast path variables") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by:
-
Andy Shevchenko authored
There is no need to have an intermediate functions as DEFINE_RES_*() macros are represented by compound literals. Just use them in place. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by:
-
David S. Miller authored
Maxime Chevallier says: ==================== Introduce PHY listing and link_topology tracking Here's a V5 of the multi-PHY support series. At a glance, besides some minor fixes and R'd-by from Andrew, one of the thing this series does is remove the ASSERT_RTNL() from the topo_add_phy/del_phy operations. These operations will take a PHY device and put it into the list of devices associated to a netdevice. The main thing to protect here is the list itself, but since we use xarrays, my naive understanding of it is that it contains its own protection scheme. There shouldn't be a need for more locking, as the insertion/deletion paths are already hooked into the PHY connection to a netdev, or disconnection from it. Now for the rest of the cover : As a remainder, this ongoing work aims ultimately at supporting complex link topologies that involve multiplexing multiple PHYs/SFPs on a single netdevice. As a first step, it's required that we are able to enumerate the PHYs on a given ethernet interface. By just doing so, we also improve already-existing use-cases, namely the copper SFP modules support when a media-converter is used (as we have 2 PHYs on the link, but only one is referenced by net_device.phydev, which is used on a variety of netlink commands). The series is architectured as follows : - The first patch adds the notion of phy_link_topology, which tracks all PHYs attached to a netdevice. - Patches 2, 3 and 4 adds some plumbing into SFP and phylib to be able to connect the dots when building the topology tree, to know which PHY is connected to which SFP bus, trying not to be too invasive on phylib. - Patch 5 allows passing a PHY_INDEX to ethnl commands. I'm uncertain about this, as there are at least 4 netlink commands ( 5 with the one introduced in patch 7 ) that targets PHYs directly or indirectly, which to me makes it worth-it to have a generic way to pass a PHY index to commands, however the approach taken may be too generic. - Patch 6 is the netlink spec update + ethtool-user.c|h autogenerated code update (the autogenerated code triggers checkpatch warning though) - Patch 7 introduces a new netlink command set to list PHYs on a netdevice. It implements a custom DUMP and GET operation to allow filtered dumps, that lists all PHYs on a given netdevice. I couldn't use most of ethnl's plumbing though. - Patch 8 is the netlink spec update + ethtool-user.c|h update for that new command - Patch 8,9,10 and 11 updates the PLCA, strset, cable-test and pse netlink commands to use the user-provided PHY instead of net_device.phydev. - Finally patch 12 adds some documentation for this whole work. Examples ======== Here's a short overview of the kind of operations you can have regarding the PHY topology. These tests were performed on a MacchiatoBin, which has 3 interfaces : eth0 and eth1 have the following layout: MAC - PHY - SFP eth2 has this more classic topology : MAC - PHY - RJ45 finally eth3 has the following topology : MAC - SFP When performing a dump with all interfaces down, we don't get any result, as no PHY has been attached to their respective net_device : None The following output is with eth0, eth2 and eth3 up, but no SFP module inserted in none of the interfaces : [{'downstream-sfp-name': 'sfp-eth0', 'drvname': 'mv88x3310', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 0, 'index': 1, 'name': 'f212a600.mdio-mii:00', 'upstream-type': 'mac'}, {'drvname': 'Marvell 88E1510', 'header': {'dev-index': 4, 'dev-name': 'eth2'}, 'id': 21040593, 'index': 1, 'name': 'f212a200.mdio-mii:00', 'upstream-type': 'mac'}] And now is a dump operation with a copper SFP in the eth0 port : [{'downstream-sfp-name': 'sfp-eth0', 'drvname': 'mv88x3310', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 0, 'index': 1, 'name': 'f212a600.mdio-mii:00', 'upstream-type': 'mac'}, {'drvname': 'Marvell 88E1111', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 21040322, 'index': 2, 'name': 'i2c:sfp-eth0:16', 'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'}, 'upstream-type': 'phy'}, {'drvname': 'Marvell 88E1510', 'header': {'dev-index': 4, 'dev-name': 'eth2'}, 'id': 21040593, 'index': 1, 'name': 'f212a200.mdio-mii:00', 'upstream-type': 'mac'}] -- Note that this shouldn't actually work as the 88x3310 PHY doesn't allow a 1G SFP to be connected to its SFP interface, and I don't have a 10G copper SFP, so for the sake of the demo I applied the following modification, which of courses gives a non-functionnal link, but the PHY attach still works, which is what I want to demonstrate : @@ -488,7 +488,7 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) if (iface != PHY_INTERFACE_MODE_10GBASER) { dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); - return -EINVAL; + //return -EINVAL; } return 0; } Finally an example of the filtered DUMP operation that Jakub suggested in V1 : [{'downstream-sfp-name': 'sfp-eth0', 'drvname': 'mv88x3310', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 0, 'index': 1, 'name': 'f212a600.mdio-mii:00', 'upstream-type': 'mac'}, {'drvname': 'Marvell 88E1111', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 21040322, 'index': 2, 'name': 'i2c:sfp-eth0:16', 'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'}, 'upstream-type': 'phy'}] And a classic GET operation allows querying a single PHY's info : {'drvname': 'Marvell 88E1111', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 21040322, 'index': 2, 'name': 'i2c:sfp-eth0:16', 'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'}, 'upstream-type': 'phy'} Changed in V5: - Removed the RTNL assertion in the topology ops - Made the phy_topo_get_phy inline - Fixed the PSE-PD multi-PHY support by re-adding a wrongly dropped check - Fixed some typos in the documentation - Fixed reverse xmas trees Changes in V4: - Dropped the RFC flag - Made the net_device integration independent to having phylib enabled - Removed the autogenerated ethtool-user code for the YNL specs Changes in V3: - Added RTNL assertions where needed - Fixed issues in the DUMP code for PHY_GET, which crashed when running it twice in a row - Added the documentation, and moved in-source docs around - renamed link_topology to phy_link_topology Changes in V2: - Added the DUMP operation - Added much more information in the reported data, to be able to reconstruct precisely the topology tree - renamed phy_list to link_topology ==================== Signed-off-by: -
Maxime Chevallier authored
The newly introduced phy_link_topology tracks all ethernet PHYs that are attached to a netdevice. Document the base principle, internal and external APIs. As the phy_link_topology is expected to be extended, this documentation will hold any further improvements and additions made relative to topology handling. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Maxime Chevallier authored
The ETH_SS_PHY_STATS command gets PHY statistics. Use the phydev pointer from the ethnl request to allow query phy stats from each PHY on the link. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Maxime Chevallier authored
Cable testing is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY. Signed-off-by:
-
Maxime Chevallier authored
PSE and PD configuration is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY device. Signed-off-by:
-
Maxime Chevallier authored
PLCA is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY. Signed-off-by:
-
Maxime Chevallier authored
The PHY_GET command, supporting both DUMP and GET operations, is used to retrieve the list of PHYs connected to a netdevice, and get topology information to know where exactly it sits on the physical link. Add the netlink specs corresponding to that command. Signed-off-by:
-
Maxime Chevallier authored
As we have the ability to track the PHYs connected to a net_device through the link_topology, we can expose this list to userspace. This allows userspace to use these identifiers for phy-specific commands and take the decision of which PHY to target by knowing the link topology. Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list devices on only one interface. Signed-off-by:
-
Maxime Chevallier authored
Update the spec to take the newly introduced phy-index as a generic request parameter. Signed-off-by:
-
Maxime Chevallier authored
Some netlink commands are target towards ethernet PHYs, to control some of their features. As there's several such commands, add the ability to pass a PHY index in the ethnl request, which will populate the generic ethnl_req_info with the relevant phydev when the command targets a PHY. Signed-off-by:
-
Maxime Chevallier authored
Knowing the bus name is helpful when we want to expose the link topology to userspace, add a helper to return the SFP bus name. Signed-off-by:
-
Maxime Chevallier authored
There are a few PHY drivers that can handle SFP modules through their sfp_upstream_ops. Introduce Phylib helpers to keep track of connected SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the upstream PHY's netdev's namespace. By doing so, these SFP PHYs can be enumerated and exposed to users, which will be able to use their capabilities. Signed-off-by:
-
Maxime Chevallier authored
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy operation. This is preparatory work to help track phy devices across a net_device's link. Signed-off-by:
-
Maxime Chevallier authored
Link topologies containing multiple network PHYs attached to the same net_device can be found when using a PHY as a media converter for use with an SFP connector, on which an SFP transceiver containing a PHY can be used. With the current model, the transceiver's PHY can't be used for operations such as cable testing, timestamping, macsec offload, etc. The reason being that most of the logic for these configuration, coming from either ethtool netlink or ioctls tend to use netdev->phydev, which in multi-phy systems will reference the PHY closest to the MAC. Introduce a numbering scheme allowing to enumerate PHY devices that belong to any netdev, which can in turn allow userspace to take more precise decisions with regard to each PHY's configuration. The numbering is maintained per-netdev, in a phy_device_list. The numbering works similarly to a netdevice's ifindex, with identifiers that are only recycled once INT_MAX has been reached. This prevents races that could occur between PHY listing and SFP transceiver removal/insertion. The identifiers are assigned at phy_attach time, as the numbering depends on the netdevice the phy is attached to. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== netfilter pull request 23-12-22 The following patchset contains Netfilter updates for net-next: 1) Add locking for NFT_MSG_GETSETELEM_RESET requests, to address a race scenario with two concurrent processes running a dump-and-reset which exposes negative counters to userspace, from Phil Sutter. 2) Use GFP_KERNEL in pipapo GC, from Florian Westphal. 3) Reorder nf_flowtable struct members, place the read-mostly parts accessed by the datapath first. From Florian Westphal. 4) Set on dead flag for NFT_MSG_NEWSET in abort path, from Florian Westphal. 5) Support filtering zone in ctnetlink, from Felix Huettner. 6) Bail out if user tries to redefine an existing chain with different type in nf_tables. ==================== Signed-off-by:
-
- Jan 01, 2024
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== bpf-next-for-netdev The following pull-request contains BPF updates for your *net-next* tree. We've added 22 non-merge commits during the last 3 day(s) which contain a total of 23 files changed, 652 insertions(+), 431 deletions(-). The main changes are: 1) Add verifier support for annotating user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience, from Andrii Nakryiko. These tags are: - Ability to annotate a special PTR_TO_CTX argument - Ability to annotate a generic PTR_TO_MEM as non-NULL 2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from Menglong Dong. 3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao. 4) Re-support uid/gid options when mounting bpffs which had to be reverted with the prior token series revert to avoid conflicts, from Daniel Borkmann. 5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found from fuzzing the library with malformed ELF files, from Mingyi Zhang. 6) Skip DWARF sections in libbpf's linker sanity check given compiler options to generate compressed debug sections can trigger a rejection due to misalignment, from Alyssa Ross. 7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman. 8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King. ==================== Signed-off-by: -
Luiz Angelo Daros de Luca authored
The __of_mdiobus_register() function was storing the device node in dev.of_node without increasing its reference count. It implicitly relied on the caller to maintain the allocated node until the mdiobus was unregistered. Now, __of_mdiobus_register() will acquire the node before assigning it, and of_mdiobus_unregister_callback() will be called at the end of mdio_unregister(). Drivers can now release the node immediately after MDIO registration. Some of them are already doing that even before this patch. Signed-off-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by:
-
