FIELD_GET() can do the job smarter and more readable. We don't even need
ASCFSTAT_TXFREEOFF. So switch to the former and remove the latter.

Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220927111819.18516-2-jslaby@suse.cz


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is one more place where lqasc_tx_ready() can be used now:
lqasc_console_putchar(). So replace the open-coded variant by the
helper.

Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220927111819.18516-1-jslaby@suse.cz


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no issue compiling pxa.c even in the SERIAL_8250=y case. So to
cover it in the usual configurations, add "|| COMPILE_TEST" there.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220927110528.12815-1-jslaby@suse.cz


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If CONFIG_SERIAL_EARLYCON and CONFIG_OF are both not set,
gcc warns about unused variable:

drivers/tty/serial/stm32-usart.c:83:32: error: ‘stm32h7_info’ defined but not used [-Werror=unused-variable]
 static struct stm32_usart_info stm32h7_info = {
                                ^~~~~~~~~~~~
drivers/tty/serial/stm32-usart.c:61:32: error: ‘stm32f7_info’ defined but not used [-Werror=unused-variable]
 static struct stm32_usart_info stm32f7_info = {
                                ^~~~~~~~~~~~
drivers/tty/serial/stm32-usart.c:40:32: error: ‘stm32f4_info’ defined but not used [-Werror=unused-variable]
 static struct stm32_usart_info stm32f4_info = {
                                ^~~~~~~~~~~~
cc1: all warnings being treated as errors

Mark these variables as __maybe_unused  to fix this.

Fixes: c7039ce9

 ("serial: stm32: make info structs static to avoid sparse warnings")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220926025826.44145-1-renzhijie2@huawei.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the driver makes use of `__clk_is_enabled()` in order to
know whether a `clk_disable_unprepare()` is needed or not on the
GCLK, a new dependency has been introduced: COMMON_CLK. If this
`CONFIG_COMMON_CLK` is not enabled, whatever config may have this
driver enabled without COMMON_CLK then an undefined reference to
`__clk_is_enabled()` will be issued by the linker.

Thus, make sure that, unless `CONFIG_COMMON_CLK` is enabled, this
driver is not compiled.

Fixes: 5e3ce1f2

 ("tty: serial: atmel: Make the driver aware of the existence of GCLK")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220926143244.485578-1-sergiu.moga@microchip.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit edc6afc5 ("tty: switch to ktermios and new framework")
termios speed is no longer stored only in c_cflag member but also in new
additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag
then termios speed is stored only in these new members.

Since commit 027b5717 ("serial: core: Fix initializing and restoring
termios speed") termios speed is available also in struct console.

So properly restore also c_ispeed and c_ospeed members after suspend to fix
restoring termios speed which is not represented by Bnnn constant.

Fixes: 4516d50a

 ("serial: 8250: Use canary to restart console after suspend")
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220924104324.4035-1-pali@kernel.org


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When a UART port is newly registered, uart_configure_port() seeks to
deassert RS485 Transmit Enable by setting the RTS bit in port->mctrl.
However a number of UART drivers interpret a set RTS bit as *assertion*
instead of deassertion:  Affected drivers include those using
serial8250_em485_config() (except 8250_bcm2835aux.c) and some using
mctrl_gpio (e.g. imx.c).

Since the interpretation of the RTS bit is driver-specific, it is not
suitable as a means to centrally deassert Transmit Enable in the serial
core.  Instead, the serial core must call on drivers to deassert it in
their driver-specific way.  One way to achieve that is to call
->rs485_config().  It implicitly deasserts Transmit Enable.

So amend uart_configure_port() and uart_resume_port() to invoke
uart_rs485_config().  That allows removing calls to uart_rs485_config()
from drivers' ->probe() hooks and declaring the function static.

Skip any invocation of ->set_mctrl() if RS485 is enabled.  RS485 has no
hardware flow control, so the modem control lines are irrelevant and
need not be touched.  When leaving RS485 mode, reset the modem control
lines to the state stored in port->mctrl.  That way, UARTs which are
muxed between RS485 and RS232 transceivers drive the lines correctly
when switched to RS232.  (serial8250_do_startup() historically raises
the OUT1 modem signal because otherwise interrupts are not signaled on
ancient PC UARTs, but I believe that no longer applies to modern,
RS485-capable UARTs and is thus safe to be skipped.)

imx.c modifies port->mctrl whenever Transmit Enable is asserted and
deasserted.  Stop it from doing that so port->mctrl reflects the RS232
line state.

8250_omap.c deasserts Transmit Enable on ->runtime_resume() by calling
->set_mctrl().  Because that is now a no-op in RS485 mode, amend the
function to call serial8250_em485_stop_tx().

fsl_lpuart.c retrieves and applies the RS485 device tree properties
after registering the UART port.  Because applying now happens on
registration in uart_configure_port(), move retrieval of the properties
ahead of uart_add_one_port().

Link: https://lore.kernel.org/all/20220329085050.311408-1-matthias.schiffer@ew.tq-group.com/
Link: https://lore.kernel.org/all/8f538a8903795f22f9acc94a9a31b03c9c4ccacb.camel@ginzinger.com/
Fixes: d3b3404d

 ("serial: Fix incorrect rs485 polarity on uart open")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reported-by: Roosen Henri <Henri.Roosen@ginzinger.com>
Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/2de36eba3fbe11278d5002e4e501afe0ceaca039.1663863805.git.lukas@wunner.de


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uart_xmit_advance() provides a common way on how to advance
the Tx queue. Use it for the sake of unification and robustness.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220909091102.58941-1-andriy.shevchenko@linux.intel.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uart_xmit_advance() provides a common way on how to advance
the Tx queue. Use it for the sake of unification and robustness.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220909091258.68886-1-andriy.shevchenko@linux.intel.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 7e2cd21e ("Merge tag 'tty-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty"

) into tty-next

We need the tty fixes and api additions in this branch.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tty/serial driver fixes from Greg KH:
 "Here are some small, and late, serial driver fixes for 6.0-rc7 to
  resolve some reported problems.

  Included in here are:

   - tegra icount accounting fixes, including a framework function that
     other drivers will be converted over to using in 6.1-rc1.

   - fsl_lpuart reset bugfix

   - 8250 omap 485 bugfix

   - sifive serial clock bugfix

  The last three patches have not shown up in linux-next due to them
  being added to my tree only 2 days ago, but they are tiny and
  self-contained and the developers say they resolve issues that they
  have with 6.0-rc. The other three have been in linux-next for a while
  with no reported issues"

* tag 'tty-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: sifive: enable clocks for UART when probed
  serial: 8250: omap: Use serial8250_em485_supported
  serial: fsl_lpuart: Reset prior to registration
  serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
  serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
  serial: Create uart_xmit_advance()

Pull cgroup fixes from Tejun Heo:

 - Add Waiman Long as a cpuset maintainer

 - cgroup_get_from_id() could be fed a kernfs ID which doesn't point to
   a cgroup directory but a knob file and then crash. Error out if the
   lookup kernfs_node isn't a directory.

* tag 'cgroup-for-6.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: cgroup_get_from_id() must check the looked-up kn is a directory
  cpuset: Add Waiman Long as a cpuset maintainer

Pull workqueue fix from Tejun Heo:
 "Just one patch to improve flush lockdep coverage"

* tag 'wq-for-6.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: don't skip lockdep work dependency in cancel_work_sync()

Pull io_uring fix from Jens Axboe:
 "Just a single fix for an issue with un-reaped IOPOLL requests on ring
  exit"

* tag 'io_uring-6.0-2022-09-23' of git://git.kernel.dk/linux:
  io_uring: ensure that cached task references are always put on exit

Pull block fixes from Jens Axboe:
 "Fix a regression that's been plaguing us by reverting the offending
  commit, as attempts to both reproduce the issue and fix it in a saner
  fashion have failed.

  Fix for a potential oops condition in the s390 dasd block driver"

* tag 'block-6.0-2022-09-22' of git://git.kernel.dk/linux:
  Revert "block: freeze the queue earlier in del_gendisk"
  s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup

After the conversion to json-schema, what was previously known as
`Documentation/devicetree/bindings/mfd/atmel-usart.txt`
has been moved to another bindings directory and renamed to
`Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml`.
Thus, make `MAINTAINERS` reflect this change.

Fixes: b9e947fb

 ("dt-bindings: serial: atmel,at91-usart: convert to json-schema")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Link: https://lore.kernel.org/r/20220923113415.90236-1-sergiu.moga@microchip.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring caches task references to avoid doing atomics for each of them
per request. If a request is put from the same task that allocated it,
then we can maintain a per-ctx cache of them. This obviously relies
on io_uring always pruning caches in a reliable way, and there's
currently a case off io_uring fd release where we can miss that.

One example is a ring setup with IOPOLL, which relies on the task
polling for completions, which will free them. However, if such a task
submits a request and then exits or closes the ring without reaping
the completion, then ring release will reap and put. If release happens
from that very same task, the completed request task refs will get
put back into the cache pool. This is problematic, as we're now beyond
the point of pruning caches.

Manually drop these caches after doing an IOPOLL reap. This releases
references from the current task, which is enough. If another task
happens to be doing the release, then the caching will not be
triggered and there's no issue.

Cc: stable@vger.kernel.org
Fixes: e98e49b2

 ("io_uring: extend task put optimisations")
Reported-by: Homin Rhee <hominlab@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull arm64 fixes from Will Deacon:
 "These are all very simple and self-contained, although the CFI
  jump-table fix touches the generic linker script as that's where the
  problematic macro lives.

   - Fix false positive "sleeping while atomic" warning resulting from
     the kPTI rework taking a mutex too early.

   - Fix possible overflow in AMU frequency calculation

   - Fix incorrect shift in CMN PMU driver which causes problems with
     newer versions of the IP

   - Reduce alignment of the CFI jump table to avoid huge kernel images
     and link errors with !4KiB page size configurations"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  vmlinux.lds.h: CFI: Reduce alignment of jump-table to function alignment
  perf/arm-cmn: Add more bits to child node address offset field
  arm64: topology: fix possible overflow in amu_fie_setup()
  arm64: mm: don't acquire mutex when rewriting swapper

cgroup has to be one kernfs dir, otherwise kernel panic is caused,
especially cgroup id is provide from userspace.

Reported-by: Marco Patalano <mpatalan@redhat.com>
Fixes: 6b658c48

 ("scsi: cgroup: Add cgroup_get_from_id()")
Cc: Muneendra <muneendra.kumar@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull driver core fixes from Greg KH:
 "Here are two tiny driver core fixes for 6.0-rc7 that resolve some
  oft-reported problems.

  The first is a revert of the "fw_devlink.strict=1" default option that
  we keep trying to enable, but we keep finding platforms that this just
  breaks everything on. So again, we need it reverted and hopefully it
  can be worked on in future releases.

  The second is a sysfs file-size bugfix that resolves an issue that
  many people are starting to hit as the fix it is fixing also was
  backported to stable kernels. The util-linux developers are starting
  to get bugreports about sysfs files that contain no data because of
  this problem, and this fix which has been in linux-next in the
  bitfield tree for a long time, resolves it. I'm submitting it here as
  it needs to be merged for 6.0-final, not for 6.1-rc1.

  Both of these have been in linux-next with no reported issues, only
  reports were that these fixed problems"

* tag 'driver-core-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
  Revert "driver core: Set fw_devlink.strict=1 by default"

Pull USB / Thunderbolt driver fixes and ids from Greg KH:
 "Here are a few small USB and Thunderbolt driver fixes and new device
  ids for 6.0-rc7.

  They contain:

   - new usb-serial driver ids

   - documentation build warning fix in USB hub code

   - flexcop-usb long-posted bugfix (the v4l maintainer for this is MIA
     so I have finally picked this up as it is a fix for a reported
     problem.)

   - dwc3 64bit DMA bugfix

   - new thunderbolt device ids

   - typec build error fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLY
  media: flexcop-usb: fix endpoint type check
  USB: serial: option: add Quectel RM520N
  USB: serial: option: add Quectel BG95 0x0203 composition
  thunderbolt: Add support for Intel Maple Ridge single port controller
  usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA
  USB: core: Fix RST error in hub.c

Pull landlock fix from Mickaël Salaün:
 "Fix out-of-tree builds for Landlock tests"

* tag 'landlock-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Fix out-of-tree builds

Pull RISC-V fixes from Palmer Dabbelt:

 - A handful of build fixes for the T-Head errata, including some
   functional issues the compilers found

 - A fix for a nasty sigreturn bug

* tag 'riscv-for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Avoid coupling the T-Head CMOs and Zicbom
  riscv: fix a nasty sigreturn bug...
  riscv: make t-head erratas depend on MMU
  riscv: fix RISCV_ISA_SVPBMT kconfig dependency warning
  RISC-V: Clean up the Zicbom block size probing

Pull kvm fixes from Paolo Bonzini:
 "As everyone back came back from conferences, here are the pending
  patches for Linux 6.0.

  ARM:

   - Fix for kmemleak with pKVM

  s390:

   - Fixes for VFIO with zPCI

   - smatch fix

  x86:

   - Ensure XSAVE-capable hosts always allow FP and SSE state to be
     saved and restored via KVM_{GET,SET}_XSAVE

   - Fix broken max_mmu_rmap_size stat

   - Fix compile error with old glibc that doesn't have gettid()"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled
  KVM: x86: Always enable legacy FP/SSE in allowed user XFEATURES
  KVM: x86: Reinstate kvm_vcpu_arch.guest_supported_xcr0
  KVM: x86/mmu: add missing update to max_mmu_rmap_size
  selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.c
  KVM: s390: pci: register pci hooks without interpretation
  KVM: s390: pci: fix GAIT physical vs virtual pointers usage
  KVM: s390: Pass initialized arg even if unused
  KVM: s390: pci: fix plain integer as NULL pointer warnings
  KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_base

Pull xen fix from Juergen Gross:
 "A single fix for an issue in the xenbus driver (initialization of
  multi-page rings for Xen PV devices)"

* tag 'for-linus-6.0-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/xenbus: fix xenbus_setup_ring()

Pull drm fixes from Dave Airlie:
 "Regular fixes for the week, i915, mediatek, hisilicon, mgag200 and
  panel have some small fixes.

  amdgpu has more stack size fixes for clang build, and fixes for new
  IPs, but all with low regression chances since they are for stuff new
  in v6.0.

  i915:
   - avoid a general protection failure when using perf/OA
   - avoid kernel warnings on driver release

  amdgpu:
   - SDMA 6.x fix
   - GPUVM TF fix
   - DCN 3.2.x fixes
   - DCN 3.1.x fixes
   - SMU 13.x fixes
   - Clang stack size fixes for recently enabled DML code
   - Fix drm dirty callback change on non-atomic cases
   - USB4 display fix

  mediatek:
   - dsi: Add atomic {destroy,duplicate}_state, reset callbacks
   - dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
   - Fix wrong dither settings

  hisilicon:
   - Depend on MMU

  mgag200:
   - Fix console on G200ER

  panel:
   - Fix innolux_g121i1_l01 bus format"

* tag 'drm-fixes-2022-09-23-1' of git://anongit.freedesktop.org/drm/drm: (30 commits)
  MAINTAINERS: switch graphics to airlied other addresses
  drm/mediatek: dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
  drm/amd/display: Reduce number of arguments of dml314's CalculateFlipSchedule()
  drm/amd/display: Reduce number of arguments of dml314's CalculateWatermarksAndDRAMSpeedChangeSupport()
  drm/amdgpu: don't register a dirty callback for non-atomic
  drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0
  drm/amd/pm: add support for 3794 pptable for SMU13.0.0
  drm/amd/display: correct num_dsc based on HW cap
  drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314
  drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINE
  drm/amd/display: increase dcn315 pstate change latency
  drm/amd/display: Fix DP MST timeslot issue when fallback happened
  drm/amd/display: Display distortion after hotplug 5K tiled display
  drm/amd/display: Update dummy P-state search to use DCN32 DML
  drm/amd/display: skip audio setup when audio stream is enabled
  drm/amd/display: update gamut remap if plane has changed
  drm/amd/display: Assume an LTTPR is always present on fixed_vs links
  drm/amd/display: fix dcn315 memory channel count and width read
  drm/amd/display: Fix double cursor on non-video RGB MPO
  drm/amd/display: Only consider pixle rate div policy for DCN32+
  ...

Merge tag 'kvm-s390-master-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

More pci fixes
Fix for a code analyser warning

Due to undocumented, hysterical raisins on x86, the CFI jump-table
sections in .text are needlessly aligned to PMD_SIZE in the vmlinux
linker script. When compiling a CFI-enabled arm64 kernel with a 64KiB
page-size, a PMD maps 512MiB of virtual memory and so the .text section
increases to a whopping 940MiB and blows the final Image up to 960MiB.
Others report a link failure.

Since the CFI jump-table requires only instruction alignment, reduce the
alignment directives to function alignment for parity with other parts
of the .text section. This reduces the size of the .text section for the
aforementioned 64KiB page size arm64 kernel to 19MiB for a much more
reasonable total Image size of 39MiB.

Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Mohan Rao .vanimina" <mailtoc.mohanrao@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/CAL_GTzigiNOMYkOPX1KDnagPhJtFNqSK=1USNbS0wUL4PW6-Uw@mail.gmail.com/
Fixes: cf68fffb

 ("add support for Clang CFI")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220922215715.13345-1-will@kernel.org


Signed-off-by: Will Deacon <will@kernel.org>

My linux.ie address is in a bad place.
also add dri-devel for agpgart.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Short summary of fixes pull

 * drm/hisilicon: Depend on MMU
 * drm/mgag200: Fix console on G200ER
 * drm/panel: Fix innolux_g121i1_l01 bus format

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YyxtXS588at6S4wg@linux-uq9g

Merge tag 'mediatek-drm-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux

 into drm-fixes

Mediatek DRM Fixes for Linux 6.0

1. dsi: Add atomic {destroy,duplicate}_state, reset callbacks
2. drm/mediatek: Fix wrong dither settings
3. dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220921235624.23580-1-chunkuang.hu@kernel.org

Merge tag 'amd-drm-fixes-6.0-2022-09-21' of https://gitlab.freedesktop.org/agd5f/linux

 into drm-fixes

amd-drm-fixes-6.0-2022-09-21:

amdgpu:
- SDMA 6.x fix
- GPUVM TF fix
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- SMU 13.x fixes
- Clang stack size fixes for recently enabled DML code
- Fix drm dirty callback change on non-atomic cases
- USB4 display fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220921220605.6136-1-alexander.deucher@amd.com

Pull SCSI fixes from James Bottomley:
 "Three small and pretty obvious fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpt3sas: Fix return value check of dma_get_required_mask()
  scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()
  scsi: qedf: Fix a UAF bug in __qedf_probe()

Pull slab fixes from Vlastimil Babka:

 - Fix a possible use-after-free in SLUB's kmem_cache removal,
   introduced in this cycle, by Feng Tang.

 - WQ_MEM_RECLAIM dependency fix for the workqueue-based cpu slab
   flushing introduced in 5.15, by Maurizio Lombardi.

 - Add missing KASAN hooks in two kmalloc entry paths, by Peter
   Collingbourne.

 - A BUG_ON() removal in SLUB's kmem_cache creation when allocation
   fails (too small to possibly happen in practice, syzbot used fault
   injection), by Chao Yu.

* tag 'slab-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context.
  mm/slab_common: fix possible double free of kmem_cache
  kasan: call kasan_malloc() from __kmalloc_*track_caller()
  mm/slub: fix to return errno if kmalloc() fails

Inject #UD when emulating XSETBV if CR4.OSXSAVE is not set.  This also
covers the "XSAVE not supported" check, as setting CR4.OSXSAVE=1 #GPs if
XSAVE is not supported (and userspace gets to keep the pieces if it
forces incoherent vCPU state).

Add a comment to kvm_emulate_xsetbv() to call out that the CPU checks
CR4.OSXSAVE before checking for intercepts.  AMD'S APM implies that #UD
has priority (says that intercepts are checked before #GP exceptions),
while Intel's SDM says nothing about interception priority.  However,
testing on hardware shows that both AMD and Intel CPUs prioritize the #UD
over interception.

Fixes: 02d4160f

 ("x86: KVM: add xsetbv to the emulator")
Cc: stable@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Allow FP and SSE state to be saved and restored via KVM_{G,SET}_XSAVE on
XSAVE-capable hosts even if their bits are not exposed to the guest via
XCR0.

Failing to allow FP+SSE first showed up as a QEMU live migration failure,
where migrating a VM from a pre-XSAVE host, e.g. Nehalem, to an XSAVE
host failed due to KVM rejecting KVM_SET_XSAVE.  However, the bug also
causes problems even when migrating between XSAVE-capable hosts as
KVM_GET_SAVE won't set any bits in user_xfeatures if XSAVE isn't exposed
to the guest, i.e. KVM will fail to actually migrate FP+SSE.

Because KVM_{G,S}ET_XSAVE are designed to allowing migrating between
hosts with and without XSAVE, KVM_GET_XSAVE on a non-XSAVE (by way of
fpu_copy_guest_fpstate_to_uabi()) always sets the FP+SSE bits in the
header so that KVM_SET_XSAVE will work even if the new host supports
XSAVE.

Fixes: ad856280 ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0")
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2079311


Cc: stable@vger.kernel.org
Cc: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[sean: add comment, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reinstate the per-vCPU guest_supported_xcr0 by partially reverting
commit 988896bb; the implicit assessment that guest_supported_xcr0 is
always the same as guest_fpu.fpstate->user_xfeatures was incorrect.

kvm_vcpu_after_set_cpuid() isn't the only place that sets user_xfeatures,
as user_xfeatures is set to fpu_user_cfg.default_features when guest_fpu
is allocated via fpu_alloc_guest_fpstate() => __fpstate_reset().
guest_supported_xcr0 on the other hand is zero-allocated.  If userspace
never invokes KVM_SET_CPUID2, supported XCR0 will be '0', whereas the
allowed user XFEATURES will be non-zero.

Practically speaking, the edge case likely doesn't matter as no sane
userspace will live migrate a VM without ever doing KVM_SET_CPUID2. The
primary motivation is to prepare for KVM intentionally and explicitly
setting bits in user_xfeatures that are not set in guest_supported_xcr0.

Because KVM_{G,S}ET_XSAVE can be used to svae/restore FP+SSE state even
if the host doesn't support XSAVE, KVM needs to set the FP+SSE bits in
user_xfeatures even if they're not allowed in XCR0, e.g. because XCR0
isn't exposed to the guest.  At that point, the simplest fix is to track
the two things separately (allowed save/restore vs. allowed XCR0).

Fixes: 988896bb

 ("x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0")
Cc: stable@vger.kernel.org
Cc: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The update to statistic max_mmu_rmap_size is unintentionally removed by
commit 4293ddb7 ("KVM: x86/mmu: Remove redundant spte present check
in mmu_set_spte"). Add missing update to it or max_mmu_rmap_size will
always be nonsensical 0.

Fixes: 4293ddb7

 ("KVM: x86/mmu: Remove redundant spte present check in mmu_set_spte")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Message-Id: <20220907080657.42898-1-linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The following warning appears when executing:
	make -C tools/testing/selftests/kvm

rseq_test.c: In function ‘main’:
rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration]
          (void *)(unsigned long)gettid());
                                 ^~~~~~
                                 getgid
/usr/bin/ld: /tmp/ccr5mMko.o: in function `main':
../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid'
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1

Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it.
More subsequent reuse may cause it to be wrapped in a lib file.

Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220802071240.84626-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.0, take #2

- Fix kmemleak usage in Protected KVM (again)