This driver registers a pm_power_off function to turn off the board
by force-disabling a devicetree-defined regulator.

Signed-off-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The code obtaining the ADC channels is outdated: it is
trying to work around the IIO subsystem not returning
the right -EPROBE_DEFER error code. Fix this up
by using the dev_err_probe() helper so we defer silently
where appropriate and not bail out if the IIO core
returns -EPROBE_DEFER as happens now.

Cc: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Since these IRQs are cascaded from a nested IRQ, the
generic IRQ system detects this and refuse to deliver
a fastpath IRQ in response to request_irq():

  nested = irq_settings_is_nested_thread(desc);
  if (nested) {
          if (!new->thread_fn) {
                  ret = -EINVAL;
                  goto out_mput;
          }
   (...)

Threaded IRQs work just as well so let's just request
threaded IRQs. One of the IRQs are alread requested
as threaded anyways.

Cc: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Make sure the threaded IRQs requested by the charger are
flagged as "oneshot". Usually this is what you want, and
since the interrupts are shared with the USB phy on the
AB8500 we will get a conflict like this if we don't,
since the phy request them threaded oneshot:

genirq: Flags mismatch irq 83. 00004084 (USB_LINK_STATUS
  vs. 00006084 (usb-link-status)
ab8500-charger ab8500-charger.0: failed to request
  USB_LINK_STATUS IRQ 83: -16

Cc: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Switch over to using generic dev_pm_ops since these
drivers aren't even using the special power state passed
to the legacy call.

Cc: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use a local "dev" helper variable to make the probe()
code easier to read in the ab8500 subdrivers.

Drop out-of-memory messages as these should come from the
slab core.

Cc: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

A break is not needed if it is preceded by a goto.

Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The driver include <linux/gpio.h> but actually only use
<linux/gpio/consumer.h> which is includes below. Drop the
surplus legacy header include.

Cc: Peter Rosin <peda@axentia.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The driver includes <linux/gpio.h> but fails to use any
symbols from the file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This driver uses platform data to pass GPIO lines using the
deprecated global GPIO numbers. There are no in-tree users
of this platform data.

Any out-of-tree or coming users of this driver can easily be
migrated to use machine descriptor tables as described in
Documentation/driver-api/gpio/board.rst
section "platform data".

Cc: Anish Kumar <anish198519851985@gmail.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This converts the Collie battery driver to use GPIO descriptors.
We use a mixture of 3 GPIOs defined in the machine and 3
GPIOs requested directly from the ucb1x00 chip.

Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in callers(bq24190_sysfs_show,
bq24190_charger_get_property, bq24190_charger_set_property,
bq24190_battery_get_property, bq24190_battery_set_property),
so we should fix it.

Fixes: f385e6e2

 ("power: bq24190_charger: Use PM runtime autosuspend")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This converts the S3C ADC battery to use GPIO descriptors
instead of a global GPIO number for the charging completed
GPIO. Using the pattern from the GPIO charger we name this
GPIO line "charge-status" in the board file.

Cc: linux-samsung-soc@vger.kernel.org
Cc: Sergiy Kibrik <sakib@darkstar.site>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Instead of looking up a symbol name by hand, use the %ps printk format
specifier.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The debounce timeout is generally quite long and the work not performance
critical so allow the scheduler to run the work anywhere rather than in
the normal per-CPU workqueue.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

s/on on/on

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Detect charging and discharging state. Ported from downstream Samsung
Galaxy S2 (i9100) kernel fork.

Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use pdata field of max8998_dev struct to obtain platform data.

Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Replace register and unregister function calls with
module_platform_driver().

Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The variable "ret" is initialized to zero and then returned.
Remove it and return zero.

Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Coccinelle noticed:
drivers/power/supply/ab8500_btemp.c:1107:8-28: ERROR: Threaded IRQ with
no primary handler requested without IRQF_ONESHOT.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Commit 9c80662a ("power: supply: axp288_charger: Add special handling
for HP Pavilion x2 10") added special handling for HP Pavilion x2 10
models which use the weird combination of a Type-C connector and the
non Type-C aware AXP288 PMIC.

This special handling was activated by a DMI match a the product-name
of "HP Pavilion x2 Detachable". Recently I've learned that there are
also older "HP Pavilion x2 Detachable" models with an AXP288 PMIC +
a micro-usb connector where we should not activate the special handling
for the Type-C connectors.

Extend the matching to also match on the DMI board-name and match on the
2 boards (one Bay Trail based one Cherry Trail based) of which we are
certain that they use the AXP288 + Type-C connector combination.

Note the DSDT code from these older (AXP288 + micro-USB) models contains
some AML code (which never runs under Linux) which reads the micro-USB
connector id-pin and if it is pulled to ground, which would normally mean
the port is in host mode!, then it sets the input-current-limit to 3A,
it seems HP is using the micro-USB port as a charging only connector
and identifies their own 3A capable charger though this hack which is a
major violation of the USB specs. Note HP also hardcodes a 2A limit
when the id-pin is not pulled to ground, which is also in violation
of the specs.

I've no intention to add support for HP's hack to support 3A charging
on these older models. By making the DMI matches for the Type-C equipped
models workaround more tighter, these older models will be treated just
like any other AXP288 + micro-USB equipped device and the input-current
limit will follow the BC 1.2 spec (using the defacto standard values
there where the BC 1.2 spec defines a range).

Fixes: 9c80662a ("power: supply: axp288_charger: Add special handling for HP Pavilion x2 10")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1896924


Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The value is there, so let's export it.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The default r_sns value was hardcoded there, so let's change it to the
actually configured one.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Dividing 1562500 by r_sns value usually doesn't result in an integer.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

When current sense is disabled, max17042_no_current_sense_psy_desc gets
used which ignores two last properties from the list.

Fixes: 21b01cc8

 ("power: supply: max17042_battery: Add support for the TTE_NOW prop")
Reported-by: Timon Baetz <timon.baetz@protonmail.com>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

I've checked bq25890, bq25892, bq25895 and bq25896 datasheets and
they all define IILIM to be between 100mA-3.25A with 50mA steps.

Fixes: 478efc79

 ("power: bq25890: implement INPUT_CURRENT_LIMIT property")
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This adds reset support for Luton and Jaguar2 in the ocelot-reset
driver. They are both MIPS based belonging to the Vcore III family.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This adds the support for 2 others MIPS based VCore III SoCs: Luton
and Jaguar2.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl



Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace".  So
sparse rightfully complains about passing a kernel pointer to
put_user().

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 453431a5

 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.

Since then a few more instances of kzfree() have slipped in.

Just get rid of them and remove the compatibility definition
once and for all.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If set, use the environment variable GIT_DIR to change the default .git
location of the kernel git tree.

If GIT_DIR is unset, keep using the current ".git" default.

Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com


Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull timer fixes from Thomas Gleixner:
 "A time namespace fix and a matching selftest. The futex absolute
  timeouts which are based on CLOCK_MONOTONIC require time namespace
  corrected. This was missed in the original time namesapce support"

* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/timens: Add a test for futex()
  futex: Adjust absolute futex timeouts with per time namespace offset

Pull scheduler fixes from Thomas Gleixner:
 "Two scheduler fixes:

   - A trivial build fix for sched_feat() to compile correctly with
     CONFIG_JUMP_LABEL=n

   - Replace a zero lenght array with a flexible array"

* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/features: Fix !CONFIG_JUMP_LABEL case
  sched: Replace zero-length array with flexible-array

Pull perf fix from Thomas Gleixner:
 "A single fix to compute the field offset of the SNOOPX bit in the data
  source bitmask of perf events correctly"

* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: correct SNOOPX field offset

Pull locking fix from Thomas Gleixner:
 "Just a trivial fix for kernel-doc warnings"

* tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/seqlocks: Fix kernel-doc warnings

Pull NTB fixes from Jon Mason.

* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
  NTB: Use struct_size() helper in devm_kzalloc()
  ntb: intel: Fix memleak in intel_ntb_pci_probe
  NTB: hw: amd: fix an issue about leak system resources

Pull i2c fix from Wolfram Sang:
 "Regression fix for rc1 and stable kernels as well"

* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs