- Jun 20, 2023
-
-
Hans de Goede authored
Add an "AVDD" regulator supply name alias to the supply-map which gets registered for the INT3472 GPIO regulator. This is necessary for the ov2680 driver which expects "AVDD" rather then "avdd". Updating the ov2680 driver to use "avdd" is not possible because that will break compatibility with existing DT / DTB files. Tested-by:
Hao Yao <hao.yao@intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Daniel Scally <dan.scally@ideasonboard.com> Link: https://lore.kernel.org/r/20230616172132.37859-5-hdegoede@redhat.com
-
Hans de Goede authored
On the Lenovo Miix 510-12IKB there is 1 GPIO regulator, with its GPIO listed in the INT3472 device belonging to the OV5648 back sensor. But this regulator also needs to be enabled for the OV2680 front sensor to work. Add support to skl_int3472_register_regulator() to add supply map entries pointing to both sensors based on a DMI quirk table which gives the dev_name part of the supply map for the second sensor (the sensor without the GPIO listed in its matching INT3472 ACPI device). Tested-by:
-
Hans de Goede authored
Currently the only 2 sensor_config-s both specify "avdd" as supply-id. The INT3472 device is going to be the only supplier of a regulator for the sensor device. So there is no chance of collisions with other regulator suppliers and it is undesirable to need to manually add new entries to int3472_sensor_configs[] for each new sensor module which uses a GPIO regulator. Instead just always use "avdd" as supply-id when registering the GPIO regulator. If necessary for specific sensor drivers then other supply-ids can be added as aliases in the future, adding aliases will be safe since INT3472 will be the only regulator supplier for the sensor. Cc: Bingbu Cao <bingbu.cao@intel.com> Tested-by:
-
Hans de Goede authored
The only sensor driver which needs GPIO remapping support is the ov2680 driver and ACPI enumeration support + other necessary changes to the ov2680 driver were never upstreamed. A new series updating the ov2680 driver is pending upstream now and in this series the ov2680 driver is patched to look for "powerdown" as con-id, instead of relying on GPIO remapping in the int3472 code, so the GPIO remapping is no longer necessary. Tested-by:
-
- Jun 16, 2023
-
-
Orlando Chamberlain authored
Sparce doesn't seem to like using be32_to_cpu and cpu_to_be32 to convert values for the MMIO gmux to/from the host architecture. Instead use iowrite32be and ioread32be to always convert, which should be fine because apple-gmux is only used on x86 with is always little endian. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305161712.5l3f4iI4-lkp@intel.com/ Signed-off-by:
Orlando Chamberlain <orlandoch.dev@gmail.com> Link: https://lore.kernel.org/r/20230614064931.3263-2-orlandoch.dev@gmail.com Reviewed-by:
-
- Jun 14, 2023
-
-
Michal Wilczynski authored
Currently rbtn_add() in case of failure is leaking resources. Fix this by adding a proper rollback. Move devm_kzalloc() before rbtn_acquire(), so it doesn't require rollback in case of failure. While at it, remove unnecessary assignment of NULL to device->driver_data and unnecessary whitespace, plus add a break for the default case in a switch. Suggested-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Suggested-by:
Pali Rohár <pali@kernel.org> Fixes: 817a5cdb ("dell-rbtn: Dell Airplane Mode Switch driver") Signed-off-by:
Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Rafael J. Wysocki <rafael@kernel.org> Reviewed-by:
-
- Jun 13, 2023
-
-
Hans de Goede authored
-
Srinivas Pandruvada authored
On multi package system, the TPMI SST instance is getting allocated again as the usage counter is not getting incremented. Here the instance is allocated only when the usage count is zero. There is no need to allocate again. Increment usage ID on successful return from isst_if_cdev_register(). Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20230612224033.2382527-3-srinivas.pandruvada@linux.intel.com Reviewed-by:
-
Srinivas Pandruvada authored
When multiple clients are registered and some of those modules are removed, the default IOCTL callback for those clients are still not NULL. Calling them will result in crash. Set the default IOCTL callback pointer to NULL on unregister. Signed-off-by:
-
Uwe Kleine-König authored
After commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230612073902.840435-4-u.kleine-koenig@pengutronix.de Reviewed-by:
-
Uwe Kleine-König authored
After commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by:
-
Uwe Kleine-König authored
After commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20230612073902.840435-2-u.kleine-koenig@pengutronix.de Reviewed-by:
-
David E. Box authored
An earlier commit placed some driverless devices in D3 during boot so that they don't block package cstate entry on Meteor Lake. Also place these devices in D3 after resume from suspend. Fixes: 336ba968 ("platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3") Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20230607233849.239047-2-david.e.box@linux.intel.com Reviewed-by:
-
David E. Box authored
Add a resume callback to perform platform specific functions during resume from suspend. Signed-off-by:
-
Mark Pearson authored
Fix issues identified in dytc_profile_refresh identified by lkp-tests. drivers/platform/x86/thinkpad_acpi.c:10538 dytc_profile_refresh() error: uninitialized symbol 'funcmode'. drivers/platform/x86/thinkpad_acpi.c:10531 dytc_profile_refresh() error: uninitialized symbol 'output'. drivers/platform/x86/thinkpad_acpi.c:10537 dytc_profile_refresh() error: uninitialized symbol 'output'. These issues should not lead to real problems in the field as the refresh function should only be called if MMC or PSC mode enabled. But good to fix. Thanks to Dan Carpenter and the lkp-tests project for flagging these. Reported-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202306011202.1hbgLRD4-lkp@intel.com/ Fixes: 1bc5d819 ("platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms") Signed-off-by:
Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230606151804.8819-1-mpearson-lenovo@squebb.ca Reviewed-by:
-
Srinivas Pandruvada authored
This version addresses issues with core power configuration for non CPU dies. Also address issue with JSON formatting of output. Signed-off-by: -
Srinivas Pandruvada authored
Fix two issues related to JSON formatting: 1. intel-speed-select -f json -o cp.out -c 1 core-power assoc -c 1 Intel(R) Speed Select Technology Executing on CPU model:143[0x8f] [root@spr-bkc bin]# cat cp.out | jq . "package-0:die-0:cpu-1" 2. intel-speed-select -f json -o tf.out turbo-freq enable -a Intel(R) Speed Select Technology Executing on CPU model:143[0x8f] [root@spr-bkc bin]# cat tf.out | jq . { "package-0:die-0:cpu-0": { "turbo-freq": { "enable": "success" } }, "package-1:die-0:cpu-48": { "turbo-freq": { "enable": "success" } } } "turbo-freq --auto" parse error: Expected string key before ':' at line 17, column 24 Both of these issues needed proper closing "}" for JSON. Signed-off-by: -
Srinivas Pandruvada authored
When core-power configuration or enabled is modified, this is only done for compute dies. But the config must also be set to cores with no CPUs. Without this the configuration is not affective. On displaying config information, allow display for non compute dies also. Signed-off-by:
-
- Jun 08, 2023
-
-
SungHwan Jung authored
This patch includes Platform Profile support (performance, balanced, quiet) for Victus 16-d1xxx (8A25). Signed-off-by:
SungHwan Jung <onenowy@gmail.com> Reviewed-by:
-
Mark Pearson authored
If Opcode support is available (which is the standard for all platforms going forward) then there is no need to have the encoding and kbdlang attributes visible. Signed-off-by:
-
Mark Pearson authored
The NVME/HDD index used by WMI starts at 1 so corrected the default appropriately. Note, zero index is still permitted in case it is required on future platforms. Documentation updated correspondingly Signed-off-by:
-
Mark Pearson authored
NVME passwords identifier have been standardised across the Lenovo systems and now use udrp and adrp (user and admin level) instead of unvp and mnvp. This should apparently be backwards compatible. Fixes: 640a5fa5 ("platform/x86: think-lmi: Opcode support") Signed-off-by:
-
Mark Pearson authored
Code clean up to use BIT macro as suggested. Signed-off-by:
-
Mark Pearson authored
Add comments to clarify what the different password attributes are (as requested). Signed-off-by:
-
Mark Pearson authored
The system password identification was incorrect. This means that if the password was enabled it wouldn't be detected correctly; and setting it would not work. Also updated code to use TLMI_SMP_PWD instead of TLMI_SYS_PWD to be in sync with Lenovo documentation. Fixes: 640a5fa5 ("platform/x86: think-lmi: Opcode support") Signed-off-by:
-
Mark Pearson authored
Whilst reviewing some documentation from the FW team on using WMI on Lenovo system I noticed that we weren't using Opcode support when changing BIOS settings in the thinkLMI driver. We should be doing this to ensure we're future proof as the old non-opcode mechanism has been deprecated. Tested on X1 Carbon G10 and G11. Signed-off-by:
-
Mark Pearson authored
When an attribute is being changed if the Admin account is enabled, or if a password is being updated then multiple WMI calls are needed. Add mutex protection to ensure no race conditions are introduced. Fixes: b49f72e7 ("platform/x86: think-lmi: Certificate authentication support") Signed-off-by:
-
Xi Pardee authored
commit c5ad454a ("platform/x86: intel/pmc/core: Add Meteor Lake support to pmc core driver") was supposed to add support for Meter Lake P/M and mistakenly added support for Meteor Lake S instead. Meteor Lake P/M support was added later and MTL-S support needs to be removed since its currently assigned to the wrong register maps. Fixes: c5ad454a ("platform/x86: intel/pmc/core: Add Meteor Lake support to pmc core driver") Signed-off-by:
Xi Pardee <xi.pardee@intel.com> Signed-off-by:
-
Bingbu Cao authored
On some platforms, the imaging clock should be controlled by evaluating specific clock device's _DSM method instead of setting gpio, so this change register clock if no gpio based clock and then use the _DSM method to enable and disable clock. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Shyam Sundar S K authored
Starting from Pink Sardine, number of IP blocks were added to the SoC and the PMFW has the ability to give debug stats on each the IP blocks after a S0ix cycle within part of the SMU metrics table. To differentiate this change, the 's2d_msg_id' is also changed. Add these new capabilities to the driver. Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by:
-
- May 30, 2023
-
-
Shyam Sundar S K authored
Add a helper routine to check the underlying cpu id, that can be used across the PMC driver to remove the duplicate code. Co-developed-by:
Sanket Goswami <Sanket.Goswami@amd.com> Signed-off-by:
-
Shyam Sundar S K authored
Recent PMFW's have support for querying the STB DRAM size. Add this support to the driver. Reviewed-by:
-
Shyam Sundar S K authored
Pass true/false to the bool argument of the amd_pmc_send_cmd() function, instead of 1/0 to match the function signature. Reviewed-by:
-
- May 23, 2023
-
-
Arnd Bergmann authored
The added platform_driver support fails to link when I2C core support is not rechable: x86_64-linux-ld: drivers/platform/x86/lenovo-yogabook.o: in function `yogabook_pdev_probe': lenovo-yogabook.c:(.text+0x5a5): undefined reference to `i2c_bus_type' Add a Kconfig dependency to enforce a working configuration. Fixes: 6df1523f ("platform/x86: lenovo-yogabook: Add platform driver support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230519082606.375471-1-arnd@kernel.org Signed-off-by:
-
- May 16, 2023
-
-
Krzysztof Kozlowski authored
Statically allocated array of pointers to hwmon_channel_info can be made const for safety. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230511175627.282246-4-krzysztof.kozlowski@linaro.org Reviewed-by:
-
Krzysztof Kozlowski authored
Statically allocated array of pointers to hwmon_channel_info can be made const for safety. Signed-off-by:
-
Krzysztof Kozlowski authored
Statically allocated array of pointers to hwmon_channel_info can be made const for safety. Signed-off-by:
-
Krzysztof Kozlowski authored
Statically allocated array of pointers to hwmon_channel_info can be made const for safety. Signed-off-by:
-
Liming Sun authored
This commit adds sysfs interface to be used to write into the boot log which is 1KB HW buffer on BlueField SoC. The same log buffer is also used by firmware code like ATF/UEFI, and can be displayed by userspace tools or from external host via USB/PCIe. Signed-off-by:
Liming Sun <limings@nvidia.com> Reviewed-by:
Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20230511144924.171585-1-limings@nvidia.com Reviewed-by:
-
Shyam Sundar S K authored
This patch fixes warnings with -Wmissing-prototypes: warning: no previous prototype for 'source_as_str' [-Wmissing-prototypes] warning: no previous prototype for 'slider_as_str' [-Wmissing-prototypes] Fixes: a82ebb3d ("platform/x86/amd/pmf: Add PMF acpi debug support") Reported-by:
Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by:
-
