- Jul 01, 2017
-
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Add proper support for L3GD20H gyroscope sensor. In particular: - use L3GD20H as device name instead of L3GD20 - fix available full scales - fix available sample frequencies Note that the original patch listed first below introduced broken support for this part. The second patch drops the support as it didn't work. This new patch brings in working support. Fixes: 9444a300 (IIO: Add support for L3GD20H gyroscope) Fixes: a0657716 ("iio:gyro: bug on L3GD20H gyroscope support") Signed-off-by:
-
Hans de Goede authored
Add support for the BOSC0200 ACPI device id used on some x86 tablets. note driver_data is not set to a specific model, driver_data is not used anyways (instead detection is done on the chip_id reg) and the 2 tablets with a BOSC0200 ACPI device id I've have 2 different chips, one has a BMA250E, the other a BMA222E. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- Jun 29, 2017
-
-
Denis Petrovic authored
This patch fixes the following checkpatch.pl warning: WARNING: Prefer kmalloc_array over kmalloc with multiply Signed-off-by:
Denis Petrovic <denis.petrovic@edu.ece.fr> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quytelda Kahja authored
This patch replaces several instances where a pointer is compared to NULL (i.e., `ptr == NULL`) with `!ptr`, which is preferred. Signed-off-by:
Quytelda Kahja <quytelda@tamalin.org> Signed-off-by:
-
Laurentiu Tudor authored
dprc.h is only used in the mc bus driver so move it together with the sources thus making it private. Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by:
-
Laurentiu Tudor authored
mc-cmd.h contains some low level functions used to encode and decode commands to the MC. They are used by the drivers so move them to the public headers and get rid of the mc-cmd.h header. Signed-off-by:
-
Laurentiu Tudor authored
mc-sys.h contains the API to send commands to the MC and is used by drivers. Move it to the public headers and get rid of the mc-sys.h header. Signed-off-by:
-
Laurentiu Tudor authored
Few files using byte order macros but did not explicitly included the required kernel header, so add it. Signed-off-by:
-
Laurentiu Tudor authored
dpmng.h & dpmng.c files expose an API of just one function which is only used by the bus driver. Move that single API in the bus source as static and remove the two files. Signed-off-by:
-
Laurentiu Tudor authored
All the mc-bus.h contents is only used privately in the bus driver so move everything to the private header and get rid of the mc-bus.h header file. Signed-off-by:
-
Laurentiu Tudor authored
Define dev_is_fsl_mc() and the bus type definition (fsl_mc_bus_type) are used externally so move them to the public header. Signed-off-by:
-
Laurentiu Tudor authored
fsl_mc_msi_create_irq_domain() will is used from the irqchip glue code so it needs to be in the public headers. Signed-off-by:
-
Laurentiu Tudor authored
They are never used outside the source they are implemented in and very likely never will, so it's safe to make them static. Signed-off-by:
-
Laurentiu Tudor authored
The function fsl_mc_bus_exists() has a prototype but is never implemented so delete it from the header file. Signed-off-by:
-
Laurentiu Tudor authored
These functions already have their prototypes in fsl-mc-private.h header file so delete them from mc-bus.h. Signed-off-by:
-
Laurentiu Tudor authored
In its current form, the public headers of the mc-bus depend only on a structure "dprc_obj_desc" defined in dprc.h. Move it to the bus public header together with its associated defines and, in order to keep the naming prefixes consistent rename it to "fsl_mc_obj_desc". This will allow making dprc.h private in future patches. Signed-off-by:
-
Laurentiu Tudor authored
These couple of header files are not needed in the source so remove them. Signed-off-by:
-
Laurentiu Tudor authored
Stick to one way of checking the return code of strcmp(): use '!'. This was suggested in a review comment. Signed-off-by:
-
Laurentiu Tudor authored
Move comparison before the strcmp() in this if statement, and slightly increase efficiency by not making the strcmp() each time the if gets evaluated but only when the comparison is true. This was suggested in a review comment. Signed-off-by:
-
Colin Ian King authored
The helper function ser_to_dev does not need to be in global scope, so make it static. Cleans up sparse warning: "warning: symbol 'ser_to_dev' was not declared. Should it be static?" Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Okash Khawaja <okash.khawaja@gmail.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_err message Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_info message and split line to clean up an checkpatch line too wide warning. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_err error message Signed-off-by:
-
Gilad Ben-Yossef authored
Align block comments according to coding style. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Gilad Ben-Yossef authored
Remove or add blank lines as needed to match coding style. Signed-off-by:
-
Gilad Ben-Yossef authored
The CCFipsSyncStatus_t type was not being used in the code. Remove it. Signed-off-by:
-
Gilad Ben-Yossef authored
Replace custom type ssi_fips_state_t with underlying enum. Signed-off-by:
-
Gilad Ben-Yossef authored
Replace custom type ssi_fips_error_t with underlying enum. Signed-off-by:
-
Gilad Ben-Yossef authored
Replace references to type tdes_keys_t with struct tdes_keys. Signed-off-by:
-
Gilad Ben-Yossef authored
Fix location of pointer in variables definitions and dereference. Signed-off-by:
-
Gilad Ben-Yossef authored
Remove explicit comparisons to NULL in ccree driver. Signed-off-by:
-
Gilad Ben-Yossef authored
Fix mismatched braces between if and else. Signed-off-by:
-
Gilad Ben-Yossef authored
Fix several cases of needless braces around single statement blocks. Signed-off-by:
-
Gilad Ben-Yossef authored
Remove redundant blank lines in brace blocks Signed-off-by:
-
Gilad Ben-Yossef authored
Fix cases where the else clause was not located correctly after the if brace. Signed-off-by:
-
Gilad Ben-Yossef authored
Fix cases in ccree where explicit comparsion to true/false was made. Signed-off-by:
-
Gilad Ben-Yossef authored
Add and/or remove redundant and/or missing spaces in ccree source Signed-off-by:
-
Dhananjay Balan authored
Start holding the lock for all cases irrespective of number of fb, there could be a deadlock since this number could change in the lifetime of this lock Signed-off-by:
Dhananjay Balan <mail@dbalan.in> Signed-off-by:
-
- Jun 27, 2017
-
-
Okash Khawaja authored
This patch introduces new module parameter, dev, which takes a string representing the device that the external synth is connected to, e.g. ttyS0, ttyUSB0 etc. This is then used to communicate with the synth. That way, speakup can support more than ttyS*. As of this patch, it only supports ttyS*, ttyUSB* and selected synths for lp*. dev parameter is only available for tty-migrated synths. Users will either use dev or ser as both serve same purpose. This patch maintains backward compatility by allowing ser to be specified. When both are specified, whichever is non-default, i.e. not ttyS0, is used. If both are non-default then dev is used. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
