- Oct 12, 2017
-
-
Christian Lamparter authored
I used aes-cbc as a template for ofb. But sadly I forgot to update set_key method to crypto4xx_setkey_aes_ofb(). this was caught by the testmgr: alg: skcipher: Test 1 failed (invalid result) on encr. for ofb-aes-ppc4xx 00000000: 76 49 ab ac 81 19 b2 46 ce e9 8e 9b 12 e9 19 7d 00000010: 50 86 cb 9b 50 72 19 ee 95 db 11 3a 91 76 78 b2 00000020: 73 be d6 b8 e3 c1 74 3b 71 16 e6 9e 22 22 95 16 00000030: 3f f1 ca a1 68 1f ac 09 12 0e ca 30 75 86 e1 a7 With the correct set_key method, the aes-ofb cipher passes the test. name : ofb(aes) driver : ofb-aes-ppc4xx module : crypto4xx priority : 300 refcnt : 1 selftest : passed internal : no type : ablkcipher async : yes blocksize : 16 min keysize : 16 max keysize : 32 ivsize : 16 geniv : <default> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Christian Lamparter authored
The hmac_mc parameter of set_dynamic_sa_command_1() was defined but not used. On closer inspection it turns out, it was never wired up. Signed-off-by:
-
Stephan Mueller authored
The code is simplified by using two __be64 values for the operation instead of using two arrays of u8. This allows to get rid of the memory alignment code. In addition, the crypto_xor can be replaced with a native XOR operation. Finally, the definition of the variables is re-arranged such that the data structures come before simple variables to potentially reduce memory space. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Tudor-Dan Ambarus authored
DH_KPP_SECRET_MIN_SIZE and dh_data_size() are both returning unsigned values. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
p->key_size, p->p_size, p->g_size are all of unsigned int type. Signed-off-by:
-
Tudor-Dan Ambarus authored
ECDH_KPP_SECRET_MIN_SIZE and params->key_size are both returning unsigned values. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Christophe Jaillet authored
If the cipher name does not start with 'ecb(' we should bail out, as done in the 'create()' function in 'crypto/xts.c'. Fixes: 700cb3f5 ("crypto: lrw - Convert to skcipher") Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe Jaillet authored
All error handling paths 'goto err_drop_spawn' except this one. In order to avoid some resources leak, we should do it as well here. Fixes: 700cb3f5 ("crypto: lrw - Convert to skcipher") Signed-off-by:
-
- Oct 07, 2017
-
-
Corentin LABBE authored
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Corentin LABBE authored
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by:
-
Corentin LABBE authored
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by:
-
Colin Ian King authored
The variable len is set to zero, never read and then later updated to p - name, so clearly the zero'ing of len is redundant and can be removed. Detected by clang scan-build: " warning: Value stored to 'len' is never read" Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Allen authored
Signed-off-by:
Allen Pais <allen.lkml@gmail.com> Signed-off-by:
-
Mathias Krause authored
If the algorithm we're parallelizing is asynchronous we might change CPUs between padata_do_parallel() and padata_do_serial(). However, we don't expect this to happen as we need to enqueue the padata object into the per-cpu reorder queue we took it from, i.e. the same-cpu's parallel queue. Ensure we're not switching CPUs for a given padata object by tracking the CPU within the padata object. If the serial callback gets called on the wrong CPU, defer invoking padata_reorder() via a kernel worker on the CPU we're expected to run on. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
Mathias Krause authored
The reorder timer function runs on the CPU where the timer interrupt was handled which is not necessarily one of the CPUs of the 'pcpu' CPU mask set. Ensure the padata_reorder() callback runs on the correct CPU, which is one in the 'pcpu' CPU mask set and, preferrably, the next expected one. Do so by comparing the current CPU with the expected target CPU. If they match, call padata_reorder() right away. If they differ, schedule a work item on the target CPU that does the padata_reorder() call for us. Signed-off-by:
-
Mathias Krause authored
The parallel queue per-cpu data structure gets initialized only for CPUs in the 'pcpu' CPU mask set. This is not sufficient as the reorder timer may run on a different CPU and might wrongly decide it's the target CPU for the next reorder item as per-cpu memory gets memset(0) and we might be waiting for the first CPU in cpumask.pcpu, i.e. cpu_index 0. Make the '__this_cpu_read(pd->pqueue->cpu_index) == next_queue->cpu_index' compare in padata_get_next() fail in this case by initializing the cpu_index member of all per-cpu parallel queues. Use -1 for unused ones. Signed-off-by:
-
Mikulas Patocka authored
In 32-bit mode, the x86 architecture can hold full 32-bit pointers. Therefore, the code that copies the current address to the %ecx register and uses %ecx-relative addressing is useless, we could just use absolute addressing. The processors have a stack of return addresses for branch prediction. If we use a call instruction and pop the return address, it desynchronizes the return stack and causes branch prediction misses. This patch also moves the data to the .rodata section. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
amd authored
Use the provided mechanism in dmaengine.h to invoke the completion callback. Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
amd authored
Clean up the mapped pages and the unmap object once we are done with it. This enables the final clean-up of the object once the transfer is complete. Signed-off-by:
-
- Sep 22, 2017
-
-
raveendra padasalagi authored
Add support to explicity ACK mailbox message because after sending message we can know the send status via error attribute of brcm_message. This is needed to support "txdone_ack" supported in mailbox controller driver. Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by:
Anup Patel <anup.patel@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Geliang Tang authored
Fix checkpatch.pl warnings: WARNING: void function return statements are not generally useful FILE: crypto/rmd128.c:218: FILE: crypto/rmd160.c:261: FILE: crypto/rmd256.c:233: FILE: crypto/rmd320.c:280: FILE: crypto/tcrypt.c:385: FILE: drivers/crypto/ixp4xx_crypto.c:538: FILE: drivers/crypto/marvell/cesa.c:81: FILE: drivers/crypto/ux500/cryp/cryp_core.c:1755: Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Himanshu Jha authored
Use PTR_ERROR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Build successfully. Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Himanshu Jha authored
Kfree on NULL pointer is a no-op and therefore checking is redundant. Signed-off-by:
-
Himanshu Jha authored
kfree on NULL pointer is a no-op and therefore checking it is redundant. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Arvind Yadav authored
x86_cpu_id are not supposed to change at runtime. MODULE_DEVICE_TABLE and x86_match_cpu are working with const x86_cpu_id. So mark the non-const x86_cpu_id structs as const. Signed-off-by:
-
Arvind Yadav authored
x86_cpu_id are not supposed to change at runtime. MODULE_DEVICE_TABLE and x86_match_cpu are working with const x86_cpu_id. So mark the non-const x86_cpu_id structs as const. Signed-off-by:
-
Christian Lamparter authored
This patch improves the readability of various functions, by replacing various void* pointers declarations with their respective structs *. This makes it possible to go for the eye-friendly array-indexing methods. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Christian Lamparter authored
If one of the later memory allocations in rypto4xx_build_pdr() fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed. crypto4xx_build_sdr() has the same issue with dev->sdr. Signed-off-by:
-
Christian Lamparter authored
scatter_buffer_size is always set to PPC4XX_SD_BUFFER_SIZE. I don't think there's any point in keeping the variable around. Signed-off-by:
-
Christian Lamparter authored
This patch refactors the crypto4xx_copy_pkt_to_dst() to use scatterwalk_map_and_copy() to copy the processed data between the crypto engine's scatter ring buffer and the destination specified by the ablkcipher_request. This also makes the crypto4xx_fill_one_page() function redundant. Signed-off-by:
-
Christian Lamparter authored
The crypto engine supports more than just aes-cbc. This patch enables the remaining AES block cipher modes that pass the testmanager's test vectors. Signed-off-by:
-
Christian Lamparter authored
This patch refactors and moves the dynamic_contents helper functions into the crypto4xx_sa.h header file. * get_dynamic_sa_iv_size is no longer needed, as the cryptoapi provides the required IV size information as well. * refactor the function declarations to use the a pointer to the dynamic_sa_contents union, instead of the crypto4xx_ctx. * rename get_dynamic_sa_offset_key_field to get_dynamic_sa_key_field. It returns the pointer to the key directly. Signed-off-by:
-
Christian Lamparter authored
The driver had a union dynamic_sa_contents in place that described the meaning of the bits in the sa_contents variable. Signed-off-by:
-
Christian Lamparter authored
crypto4xx_put_pd_to_pdr() already clears the flag. Signed-off-by:
-
