- Aug 29, 2014
-
-
Sujith Manoharan authored
This patch adds a routine to setup the offchannel instance in ath_softc. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Introduce a function that handles queues in channel context mode. Signed-off-by:
-
Sujith Manoharan authored
Using these wrappers allows us to move the 'sched' variable in ath_softc inside CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by:
-
Sujith Manoharan authored
These routines are required only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by:
-
Sujith Manoharan authored
Check if channel context usage is enabled before calling ath_chanctx_event() from various parts of the driver. Also, make sure that ath_chanctx_event() is compiled only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude: ath_scan_complete() ath_roc_complete() ath_offchannel_next() ath_scan_next_channel() ath_scan_channel_duration() Signed-off-by:
-
Sujith Manoharan authored
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude more functions: ath_offchannel_channel_change() ath_scan_channel_start() ath_scan_send_probe() Signed-off-by:
-
Sujith Manoharan authored
Exclude these functions when CONFIG_ATH9K_CHANNEL_CONTEXT is not enabled: ath_chanctx_send_vif_ps_frame() ath_chanctx_send_ps_frame() ath_chanctx_defer_switch() ath_chanctx_set_next() Signed-off-by:
-
Sujith Manoharan authored
Rename the callback from ath9k_chanctx_force_active() to ath9k_mgd_prepare_tx(). Also, move it to main.c and group it with the other callbacks. Signed-off-by:
-
Sujith Manoharan authored
Also compile it conditionally based on CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Setup the offchannel/sched timers and the chanctx work inside the new function. Signed-off-by:
-
Andreea-Cristina Bernat authored
The carl9170_op_ampdu_action() function is used only by the mac80211 framework. Since the mac80211 already takes care of checks and properly serializing calls to the driver's function there is no need for the driver to do the same thing. Signed-off-by:
Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by:
-
Sujith Manoharan authored
This patch ensures that the module parameter "use_chanctx" is visible only when CONFIG_ATH9K_CHANNEL_CONTEXT is selected. Also register the channel context callbacks with mac80211 only when it is explicitly enabled and compile them out of the driver when CONFIG_ATH9K_CHANNEL_CONTEXT is not selected. Signed-off-by:
-
Sujith Manoharan authored
Use CONFIG_ATH9K_CHANNEL_CONTEXT to conditionally compile P2P-PS code. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Channel contexts are supported only for P2P right now, so make sure that the 'normal' path remains unaffected by using a config option. This will also reduce the size of the driver. Signed-off-by:
-
Sujith Manoharan authored
Add a few statements to debug channel context operation. Signed-off-by:
-
Sujith Manoharan authored
This reduces clutter in main.c Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Bob Copeland authored
kfree() null-checks its argument. Found by smatch. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Bob Copeland authored
Add the missing null termination after strncpy(). This isn't actually a buffer overflow in this case since we use snprintf() appropriately to fill the buffer passed by the caller, but in the interest of not turning this into a bug down the road, go ahead and force termination here. Found by Coverity. Signed-off-by:
-
Bob Copeland authored
rxs->rate_idx is unsigned, so it will always be >= 0. Found by Coverity. Signed-off-by:
-
Rasmus Villemoes authored
The files ray_cs.h and rayctl.h both contain two thirds of what appears to be an include guard using the macro name RAYLINK_H (both lack the #define). Since RAYLINK_H is not defined anywhere, the #ifndefs are confusing no-ops. Add proper include guards using different macro names. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Hauke Mehrtens authored
The Chipcommon B core does not have a wrap address and it would fail here. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Amitkumar Karwar authored
Newer firmware returns API revision in GET_HW_SPEC command response. We will make use of it instead of parsing this information from FW release number. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
We will remove 'fw' prefix from these variable and macro names and make them generic. Signed-off-by:
-
Amitkumar Karwar authored
While updating 'left_len' in each iteration, we should subtract last TLV length not the accumulated length of TLVs parsed till now. This bug in parsing logic is exposed by newer firmware which adds two TLVs in GET_HW_SPEC command response. Earlier firmwares used to add only one TLV. Signed-off-by:
-
Csaba Kiraly authored
Based on a quick test with AR9271, TDLS seems to be working fine. Tests were done with 2 Atheros AR9271 based devices with firmware 1.3 (sha1 8d49f928aa40ac53c729189bff1333cd373a7fb5), associated with a WAP54G access point. TDLS worked fine both in WPA2 mode and without encryption. Stations maintained ping flood traffic between each other and towards the AP without significant losses. Not tested with AR7010. TDLS was enabled in earlier patches the same way for other Atheros drivers: ath9k (fd656234), and carl9170 (d1f3de71 ). Signed-off-by:
Csaba Kiraly <csaba.kiraly@gmail.com> Signed-off-by:
-
Dan Carpenter authored
It's not moderated, it's subscribers-only. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
-
- Aug 27, 2014
-
-
Michal Kazior authored
Some copy engine structures are target specific and are uploaded to the device during init/configuration. This also cleans up a bit diag_mem_read/write implicit byteswap mess leaving only diag_access_read/write with an implicit endianess byteswap. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com>
-
Michal Kazior authored
The mapping is already defined in a structure. It makes little sense to duplicate information stored in it within a function. Signed-off-by:
-
Michal Kazior authored
It doesn't make much sense to have copy engine configuration structures spread across the whole source file. Signed-off-by:
-
Michal Kazior authored
Recent crash dump patches introduced a regression. If debugfs was disabled upon crash user could only see the following: [ 793.880000] ath10k: firmware crashed! (uuid n/a) [ 793.890000] ath10k: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.1.467.2-1 api 2 htt 2.1 [ 793.890000] ath10k: debug 0 debugfs 0 tracing 0 dfs 1 The report was missing register dump. Fix it by printing registers regardless if crash_data is present or not. Signed-off-by:
-
Michal Kazior authored
This makes it a lot easier to log and debug messages if there's more than 1 ath10k device on a system. Signed-off-by:
-
